Assembly line worker jobs in Rialto, CA - 211 jobs

**At Polaris Inc., we have fun doing what we love by driving change and innovation. We empower employees to take on challenging assignments and roles with an elevated level of responsibility in our agile working environment. Our people make us who we are, and we create incredible products and experiences that empower us to THINK OUTSIDE.** As an Assembler you will work within a team to to build Walker Evans shocks from start to completion. In this role, you'll utilize various hand and power tools, following work instructions to achieve our Polaris quality standards. If you enjoy being a part of a team and using your problem-solving skills, then this is the role for you. **Core Responsibilities** + Perform mechanical assembly of products with complex functions requiring independent judgment + Understand and follow established procedures and processes to safely produce quality parts + Recognize, communicate and document safety concerns + Troubleshoot and adjust to build a quality product + Perform housekeeping and 5S to keep the department clean, safe, and well organized + Complete work documentation accurately such as production orders, tags, and quality sheets **Education and Experience** + High school diploma, GED or equivalent preferred but not required + Technical Degree within a related field from an accredited institution or 0-2 years of related mechanical assembly experience + Must be familiar with a variety of concepts, practices, and procedures within mechanical assembly + Related manufacturing experience is preferred + Must be legally authorized to work in the United States without sponsorship **Required Physical Demands:** + Routinely lifts up to 40 pounds individually + Works in multiple positions during a shift + Ability to stand for a 10 hour shift **Environmental Exposures:** + Routinely and regularly works near moving mechanical parts + Occasionally exposed to hot conditions + Occasionally exposed to non-toxic fumes + Moderate noise level + Occasionally exposed to oil, grease, gasoline, dust, metal particles and sharp edged materials **Safety Requirements:** + Exposed to hazards/risks that require body protection (gloves, pants, steel toes, sleeves, safety glasses, etc.) **The starting pay range for California is $17.00 to $22.00 per hour, plus eligibility for** **overtime. Individual** **pay and positioning within the range are determined through a wide variety of factors including but not limited to education, experience, knowledge, skills, and geography. While individual pay could fall anywhere in the range based on these factors, it is not common to start at the high end or top of the range.** To qualify for this position, former employees must be eligible for rehire, and current employees must be in good standing. _We are an ambitious, resourceful, and driven workforce, which empowers us to THINK OUTSIDE._ _Apply today!_ At Polaris we put our employees first, by offering a holistic approach to their health and financial wellbeing. Polaris is proud to offer competitive compensation, including a market-leading profit-sharing plan that is fundamental to our pay-for-performance culture. At Polaris, employees are owners of the company through company contributions to our Employee Stock Ownership Plan and discounted employee stock purchases plan. Employees receive a generous matching contribution to 401(k), financial wellness education and consultation to plan for their financial future. In addition to competitive pay, Polaris provides a comprehensive suite of benefits, including health, dental, and vision insurance, wellness programs, paid time off, gym & personal training reimbursement, life insurance and disability offerings. Through the Polaris Foundation and our Polaris Gives paid volunteer time off, we support employees who actively volunteer their time, efforts, and passions to improve the health and wellbeing of the communities in which they live, play and work. Employees at Polaris drive our success and are rewarded for their commitment. **About Polaris** As the global leader in powersports, Polaris Inc. (NYSE: PII) pioneers product breakthroughs and enriching experiences and services that have invited people to discover the joy of being outdoors since our founding in 1954. Polaris' high-quality product line-up includes the Polaris RANGER , RZR and Polaris GENERAL side-by-side off-road vehicles; Sportsman all-terrain off-road vehicles; military and commercial off-road vehicles; snowmobiles; Indian Motorcycle mid-size and heavyweight motorcycles; Slingshot moto-roadsters; Aixam quadricycles; Goupil electric vehicles; and pontoon and deck boats, including industry-leading Bennington pontoons. Polaris enhances the riding experience with a robust portfolio of parts, garments, and accessories. Proudly headquartered in Minnesota, Polaris serves more than 100 countries across the globe. *************** (https://***************/en-us/) **EEO Statement** _Polaris Inc. is an Equal Opportunity Employer and will make all employment-related decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, national origin, age, disability, marital status, familial status, status with regard to public assistance, membership or activity in a local commission, protected veteran status, or any other status protected by applicable law. Applicants with a disability that are in need of an accommodation to complete the application process, or otherwise need assistance or an accommodation in the recruiting process, should contact Human Resources at ************ or_ _******************************_ _. To read more about employment discrimination protection under U.S. federal law, see:_ _Know Your Rights: Workplace Discrimination is Illegal (eeoc.gov)_ . At Polaris, the need for diverse perspectives and experiences enables our vision of Best People, Best Team. We value our differences and align our passions to do great work. As a highly efficient growth company, we are driven to be agile and adaptable to support our customers. At Polaris we unite to create memorable adventures. Learn more at http://***************/careers

Job Description Schedule: Full-time position Monday - Friday 1st shift: 6:00am-3:30pm or 2nd shift: 3:00pm-12:30pm Pay rate: $17.50/hr or $18.00/hr Assists and supports coworkers and performs repetitive Bonding operations to mass-produce commercial aircraft interior components such as galleys and closets for commercial transport aircraft. Must be able to work within the time constraints of the master production schedule and meet requirements dictated by the customer. SUMMARY OF JOB DUTIES - Essential Functions (Other duties and projects may be assigned or requested.) Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Promotes cooperation and communication with co-workers Places panels and parts in specified relationship to each other Follows installation procedures per engineering drawings and requirements Understands the concept of utilizing work orders Validates panel dimensions and insert locations by dry fitting before installing blocks, angles, doublers, and fittings Prepares and organizes tools and parts for use in the manufacturing area Maintain safe and effective use of all machine and hand tools as well as a safe work environment Mixes and applies adhesives as required, using manufacturers specifications as well as ECI requirements Pre-bonds doublers and cut/fold panels using shop aids per approved engineering drawings Dry fits and bond's structure using tooling and shop aids to control the critical surfaces and interface points Report any defects to quality assurance and manufacturing engineers Must be able to self-inspect personal work and correct discrepancies in a timely manner Works at different workstations as production needs require Cleans work area, machines, tools, and equipment as required Tasks could vary slightly from the various customer galleys & closets Performs other duties as assigned by production supervisor GENERAL QUALIFICATIONS - Education, Knowledge, and Experience Education: A High School diploma is preferred Experience: Position may be filled with both entry level and experienced candidates Company DescriptionPathway Group is a Recruitment and Staffing service dedicated to the Manufacturing Industry. We pride ourselves on being expert recruiters in the space staying true to our manufacturing recruitment vertical. The vast majority of our placements are contract to hire and direct hire placements. Our goal is to add value to the client and candidate. Placing the right candidate into their next career. We focus on positions like mechanical assemblers, electrical assemblers, CNC operators, CMM operators, composite technicians, quality technicians, engineers, managers, etc.Company DescriptionPathway Group is a Recruitment and Staffing service dedicated to the Manufacturing Industry. We pride ourselves on being expert recruiters in the space staying true to our manufacturing recruitment vertical. The vast majority of our placements are contract to hire and direct hire placements. Our goal is to add value to the client and candidate. Placing the right candidate into their next career. We focus on positions like mechanical assemblers, electrical assemblers, CNC operators, CMM operators, composite technicians, quality technicians, engineers, managers, etc.

The Assembler I has ownership of the assembly stations assigned. They are responsible for safety, efficiency, quality, and overall productivity. The Assembler I will be expected to perform basic and intermediate assembly processes at within the department. ESSENTIAL JOB FUNCTIONS Follow a prism-based schedule. Ability to properly assemble basic and intermediate components within the Roto department which includes but is not limited to cleaning parts, tapping inserts, bolting and/or using self-tapping screws to secure components to main body part. Order and control hardware and ensure all is inventory is accounted for. Ability to recognize and follow departmental quality guidelines. Perform all aspects of product packaging including boxing, labeling, taping, stapling and stacking cartons using established pallet patterns. Knowledge of using basic hand and power tools. Maintains a personal efficiency rating in accordance with Key Performance Targets not to fall below 100%. Willing to cross train as needed in all the assembly cells which include non-Foam line, Ingredient Bin line, LCD line, Ferry 11-line, Bus Cart line, Kits, Packs, Food Bar & FSG line, Routing, Re-box area. Print labels using computers and proper application methods. Perform FG (finished goods) transactions with all associated labeling requirements. Follow all established assembly procedures and work instructions. Access the ESP program via computer. Ability to follow verbal assembly instructions and repeat processes. Adjusting to different work assignments throughout the workday. Maintain reliable and consistent attendance, including being punctual, and dependable in order to meet the needs of the department and the organization. Execute each essential duty satisfactorily in order to perform job successfully. Follows all safety procedures required in work area, wears PPE as needed, attends all safety meetings, and reports safety issues regarding equipment or unsafe/hazardous conditions. Performs effectively as a team member, able to work well with others, open to receive and give feedback, and treats everyone with respect. Takes ownership of own work and behavior, accepts accountability for own actions, encourages solutions, and communicates status of work/projects. Follow all department quality standards/criteria. Raise concerns and issues to immediate manager. Able to understand and demonstrate Cambro company culture, display company core values (Safety, Quality, Respect, and Service). Understands department's key performance indicators and contributes to achieve these goals both individually and as a team. Other duties as needed or required. ADDITIONAL RESPONSIBILITIES Must be able to work overtime as needed, remain flexible and open to possible schedule changes in order to meet business needs. REQUIRED QUALIFICATIONS The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High school diploma or general education degree (GED); and one-year related experience and/or training; or equivalent combination of education and experience. Ability to communicate in English, both verbally and in writing. Comprehend instructions and communicate effectively. Ability to read and interpret documents such as safety rules and procedure manuals. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. PREFERRED QUALIFICATIONS ERP system experience with Prism, Intermec, and/or AS400 system Bilingual in Spanish. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sitting, walking, standing, bending at the neck, bending at the waist, squatting, climbing, kneeling, crawling, twisting at the neck and waist, repetitive use of hands, simple grasping, power grasping, fine manipulation, pushing and pulling, reaching above and below the shoulder, carrying/lifting up to 50 lbs. Driving cars, trucks, forklifts and other equipment Working around equipment and machinery Exposure to excessive noise Exposure to dust, gas, fumes or chemicals Working at heights Use of special visual or auditory protective equipment Walking on uneven ground Operation of foot controls or repetitive foot movement Risk of exposure to bio-hazard while working such as: bloodborne pathogens, sewage, hospital waste, etc. PPE REQUIREMENTS Safety glasses Utility gloves Steel-toe slip-resistant shoes Hardhat Hearing protection (e.g. ear plugs, ear muffs) Face shields Face covering (mask) in accordance with company policy. Mfg Assembler- ROTO COMPENSATION RANGE: $17.49 - $17.50 Salary may vary based on experience. CAMBRO is proud to be an equal-opportunity workplace. All qualified applicants will receive consideration for employment without regard to and will not be discriminated against based upon race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic information, military or veteran status, or other characteristics protected by law.

Job Description Job Title: Assembler / Tester A Pay range: $22.50-$32.00 Shift: 5AM- 1:30 PM or 6AM-2:30PM Accurately and efficiently assembles/tests a variety of moderately complex products to achieve customer quality and on-time delivery schedules. May perform lock wiring, first stage subassembly, and final detailing functions. Works on products that contain mechanical components, single hydraulic systems, and multiple part numbers. Actively contributes to lean initiatives to increase productivity and reduce costs. Receives general supervisory guidance. ESSENTIAL FUNCTIONS: 1. Performs moderately complex assembly/test functions utilizing mechanical skills, hand and power tools, mechanical/electronic tools, test equipment, assembly fixtures, and inspection measurement equipment in a manufacturing environment. 2. Records test results on data forms using moderately complex electrical equipment and flow measurement devices. May use XY recorders, oscilloscopes, transducers, and other related equipment. 3. Identifies malfunctions disclosed by test data and reworks as instructed. 4. Interprets blueprints, engineering orders, assembly routes, test specifications, service bulletins, customer requirements, and quality directives. 5. Produces and inspects assemblies that conform to product specifications. Assembles, tests, and/or solders to customer and/or industry standards. 6. Performs touchup or full surface painting of parts with finishing materials such as paint, lacquer, glaze, etc. Mixes paint and cleans parts. 7. Actively participates in lean initiatives by identifying and providing suggestions on areas for improvement. 8. May assist in training less experienced team members. 9. Observes all safety rules and maintains a foreign object damage (FOD) free work area. 10. Ensures all equipment is calibrated in accordance with calibration schedule. 11. May perform other related responsibilities. Job Requirements: Two or more years industry related experience in assembly/test in a manufacturing environment. Demonstrate product and process knowledge by applying it to newly learned techniques. Able to select appropriate procedures, techniques, tools, and equipment. Proficient in reading and understanding blueprints, route sheets, and test specifications. Perform basic mathematical calculations, as well as demonstrate effective verbal, written, and basic computer skills. Possess strong mechanical reasoning. Able to implement and effectively apply lean initiatives. Possess effective interpersonal communication skills, as well as the ability to work in a team environment. Able to interpret reports and use standard business software applications. Able to use employee self service

Job Description We are seeking an Assembly Line Worker to become an integral part of our team! Assemble electrical components onto light fixtures. Ability to work at various assembly stations as needed. Responsibilities: - Work from assembly instructions, parts lists, wire lists, diagrams, verbal instructions, and notes to assemble, wire and install a wide variety of components -May work in Packaging or subassembly areas as well as on the assembly production line. - Utilizes a wide range of tools including screwdrivers, wrenches, etc. - The ability to read and follow assembly work instructions including drawings and schematics. - Determine the optimum carton size for all finished goods products. - Notify the immediate supervisor or quality control technician if the product does not appear to meet specified standards. - Assist with maintaining a safe, clean, and orderly factory. - Other duties as required Qualifications: - Minimum of 1 year manufacturing experience - Assembly line experience - Must be able to read and speak English - Strong attention to detail. - Excellent manual dexterity High School Diploma or GED required. Company DescriptionEstablished in 1988 LA Lighting designs and manufactures energy efficient, specification grade LED and Fluorescent lighting fixtures for commercial and industrial applications. LA Lighting manufactures a broad range of standard fixtures along with custom capabilities to meet any job requirement and lead time. All of our fixtures are manufactured and assembled in El Monte, California.Company DescriptionEstablished in 1988 LA Lighting designs and manufactures energy efficient, specification grade LED and Fluorescent lighting fixtures for commercial and industrial applications. LA Lighting manufactures a broad range of standard fixtures along with custom capabilities to meet any job requirement and lead time. All of our fixtures are manufactured and assembled in El Monte, California.

Essential Function Examples: Identifies and assembles bearings completely after method of assembly has been established and after inspection of parts has been completed. On non-complex bearings, interprets blueprints and specification sheets to determine requirements for the bearing or component part. Sets up standard mechanical and air gages to check bearing components, and partially and/or completely assembled bearings for conformance to standards. Receives instructions from supervisor or designated individual on how to maintain complex inspection equipment. Secures first article inspection to verify set-up and continues to check the parts for conformance to standard throughout the course of the run. At the completion of the run, the incumbent obtains inspection buyoff before going to the next job. Uses mathematics involving decimals and fractions to operate inspection equipment, check tolerances and fit up of bearings. Must be able to use tables and charts to assist in the use of mathematics. Follows assembled bearings to assure they are packed according to specifications and are physically shipped when requested to do so by the supervisor. Identifies and assembles bearings completely after method of assembly has been established and after inspection of parts has been completed. On non-complex bearings, interprets blueprints and specification sheets to determine requirements for the bearing or component part. Sets up standard mechanical and air gages to check bearing components, and partially and/or completely assembled bearings for conformance to standards. Receives instructions from supervisor or designated individual on how to maintain complex inspection equipment. Secures first article inspection to verify set-up and continues to check the parts for conformance to standard throughout the course of the run. At the completion of the run, the incumbent obtains inspection buyoff before going to the next job. Uses mathematics involving decimals and fractions to operate inspection equipment, check tolerances and fit up of bearings. Must be able to use tables and charts to assist in the use of mathematics. Follows assembled bearings to assure they are packed according to specifications and are physically shipped when requested to do so by the supervisor. Experience: High school diploma or general education degree (GED), and a minimum of one year of experience in precision bearing assembly using a variety of precision checking techniques. Knowledge/Skills/Abilities: Competence to interpret blueprints and decipher documents such as safety rules, operating and/or procedure manuals. Competence to use standard measuring equipment. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graph. Special Requirements: Some overtime may required, including weekends. How to Apply: To apply, please submit your resume highlighting your relevant experience and interest in the role, you may also email your resume to ************************** or call our front office at **************. We look forward to hearing from you! Pay Range: $17 to $23 per hour **Please note that the salary range information is only applicable to California. This range is the company's good faith and reasonable estimate of the compensation for this role based on the position's responsibilities, qualifications, experience, and other relevant factors. Actual compensation may vary depending on the selected candidate's specific experience, education, skills, and other relevant factors. Equal Opportunity Employer Industrial Tectonics Bearings is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, disability, or veteran status. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, lawful permanent resident [“green card” holders] or have refugee or asylee status.

Career-defining. Life-changing. At iRhythm, you'll have the opportunity to grow your skills and your career while impacting the lives of people around the world. iRhythm is shaping a future where everyone, everywhere can access the best possible cardiac health solutions. Every day, we collaborate, create, and constantly reimagine what's possible. We think big and move fast, driven by our commitment to put patients first and improve lives. We need builders like you. Curious and innovative problem solvers looking for the chance to meaningfully shape the future of cardiac health, our company, and your career About This Role: Boldly innovating to create trusted solutions that detect, predict, and prevent disease. Discover your power to innovate while making a difference in patients' lives. iRhythm is advancing cardiac care…Join Us Now! At iRhythm, we are dedicated, self-motivated, and driven to do the right thing for our patients, clinicians, and coworkers. Our leadership is focused and committed to iRhythm's employees and the mission of the company. We are better together, embrace change and help one another. We are Thinking Bigger and Moving Faster. iRhythm is currently seeking an experienced Assembler operator in our Cypress, CA location. Our production environment is fast-paced, with a collaborative atmosphere. Most of all, we are passionate about delivering innovations that improve the quality of health care and the patient experience. We are looking for like-minded individuals to join our team today! What You Will Be Doing Follow HIPAA, ISO 13485, Joint Commission, and OSHA standards Follow all Work Instructions, SOP's and safety requirements Comply with iRhythm's Core Values, policy, procedures, and quality standards, and safety and environmental regulations Ability to work in a fast-paced environment Ability to read, write and communicate in English High attention to detail Identify Continuous Improvement Opportunities Ability to work towards a high-quality standard Communicate material and equipment issues to the Line Lead Perform routine minor maintenance Familiar with or ability to learn proper Electrostatic Discharge Sensitive (ESD) handling processes and procedures Keep a clean and well-maintained workspace 0-25% Completion of Production Training Matrix Proficiency What We Want to See Teamwork - work together to achieve great quality result for our patients and customer Dependability and reliability - strive to attain result on time; convey a sense of urgency and drive issues to closure Communication - successfully provide feedback and collaborate across the functional team Minimum 0 -2 years related experience in a medical device, manufacturing or ISO registered Physical Demands Sitting, standing, or walking for prolonged periods. Lifting, carrying, pushing, pulling and/or transferring equipment and materials of up to 20 lbs; considerable reaching, stooping, bending, kneeling, and crouching. High level of repetitive motion at moderate to fast pace of upper torso, hands, arms and wrists; whole body posture required to move materials and finished good products What's in it for you: This is a regular full-time position with competitive compensation package, excellent benefits including medical, dental, and vision insurances (all of which start on your first day), health savings account employer contributions (when enrolled in high deductible medical plan), cafeteria plan pre-taxed benefits (FSA, dependent care FSA, commute reimbursement accounts), travel reimbursement for medical care, noncontributory basic life insurance & short/ long term disability. Additionally, we offer: • emotional health support for you and your loved ones • legal / financial / identity theft/ pet and child referral assistance • paid parental leave, paid holidays, travel assistance for personal trips and PTO! iRhythm also provides additional benefits including 401(k) (with company match), an Employee Stock Purchase Plan, pet insurance discount, unlimited amount of LinkedIn Learning classes and so much more! FLSA Status: Exempt As a part of our core values, we ensure a diverse and inclusive workforce. We welcome and celebrate people of all backgrounds, experiences, skills, and perspectives. iRhythm Technologies, Inc. is an Equal Opportunity Employer. We will consider for employment all qualified applicants with arrest and conviction records in accordance with all applicable laws. iRhythm provides reasonable accommodations for qualified individuals with disabilities in job application procedures, including those who may have any difficulty using our online system. If you need such an accommodation, you may contact us at ********************* About iRhythm Technologies iRhythm is a leading digital healthcare company that creates trusted solutions that detect, predict, and prevent disease. Combining wearable biosensors and cloud-based data analytics with powerful proprietary algorithms, iRhythm distills data from millions of heartbeats into clinically actionable information. Through a relentless focus on patient care, iRhythm's vision is to deliver better data, better insights, and better health for all. Make iRhythm your path forward. Zio, the heart monitor that changed the game. Location: Orange County Actual compensation may vary depending on job-related factors including knowledge, skills, experience, and work location. Estimated Pay Range $17.82 - $22.28 As a part of our core values, we ensure an inclusive workforce. We welcome and celebrate people of all backgrounds, experiences, skills, and perspectives. iRhythm Technologies, Inc. is an Equal Opportunity Employer. We will consider for employment all qualified applicants with arrest and conviction records in accordance with all applicable laws. iRhythm provides reasonable accommodations for qualified individuals with disabilities in job application procedures, including those who may have any difficulty using our online system. If you need such an accommodation, you may contact us at ********************* About iRhythm Technologies iRhythm is a leading digital healthcare company that creates trusted solutions that detect, predict, and prevent disease. Combining wearable biosensors and cloud-based data analytics with powerful proprietary algorithms, iRhythm distills data from millions of heartbeats into clinically actionable information. Through a relentless focus on patient care, iRhythm's vision is to deliver better data, better insights, and better health for all. Make iRhythm your path forward. Zio, the heart monitor that changed the game. There have been instances where individuals not associated with iRhythm have impersonated iRhythm employees pretending to be involved in the iRhythm recruiting process, or created postings for positions that do not exist. Please note that all open positions will always be shown here on the iRhythm Careers page, and all communications regarding the application, interview and hiring process will come from a @irhythmtech.com email address. Please check any communications to be sure they come directly from @irhythmtech.com email address. If you believe you have been the victim of an imposter or want to confirm that the person you are communicating with is legitimate, please contact *********************. Written offers of employment will be extended in a formal offer letter from an @irhythmtech.com email address ONLY. For more information, see *********************************************************************************** and *****************************************

Temp To Full-Time Skillset Group is seeking a Wire Harness Assembler to work in the Irvine, CA area. This position will under shop supervision the Inspect and perform work in accordance with IPC-A610 and other quality standards as needed. This will be a 1st shift position and will be contract to hire. To apply email: ************************* Pay: $30-$33/hr,

Requirements EXPERIENCE/ EDUCATION/LICENSURES/CERTIFICATIONS: High school diploma or equivalent, required. Thrift store, warehouse, assembly line or restaurant experience, a plus. WORKER KNOWLEDGE/ SKILLS/ ABILITIES: Fluency in Spanish, both verbal and written, a plus. Ability to demonstrate a strong work ethic. Perform in a fast-paced environment and possess strong organizational skills. Ability to determine the value of donations. Must exhibit strong customer service skills. Clear communication skills, both written and oral. Excellent time management skills and detail oriented. Ability to multi-task in a high-volume environment. Must be an effective team member. Must be able to work a flexible schedule, including weekends. Salary Description $17.87 - 19.40 (depending on experience)

Under minimal supervision, the Assembler III performs optical and mechanical assembly of high complexity requiring fitting, alignment and adjustment of components, units and assemblies to very close tolerances. Primary Duties & Responsibilities Clean and assemble various optical parts, mechanical subassemblies and large assemblies of high complexity. Requires the use of hand tools to perform a wide variety of electronic or electro-mechanical, mechanical or measurement product assembly operations on assemblies or sub-assemblies. Determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering and cable harnessing, and fitting on assembly units. Solders onto various parts as required by assembly instructions. Primes and bonds optical surfaces to other optical or mechanical components. Reads detailed, complex blueprints, assembly sketches and procedures with very little supervision. Fits or adjusts parts or assemblies within established guidelines. Inspects and test finished items or assemblies. Education & Experience High School Diploma or (GED) 4 years of experience in similar assembly operation. High level of manual dexterity, Knowledge of an ability to use a wide variety of hand tools and knowledge of soldering. Soldering certification is required Basic computer navigation skills are required Experience with optical handling, inspection and gluing are highly desired Skills Mathematical Skills Ability to calculate figures and perform simple addition, subtraction, multiplication and division of whole numbers and fractions. Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals and blueprints. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Working Conditions Job operates in production environment on 1st shift, Mon-Fri. Typically works in a lab environment with some time in an office near the work areas. Some work requires the use of hazardous chemicals. Noise level - Usually moderate Physical Requirements Standing. Particularly for sustained periods of time. Working with Hand / Fingers. Picking, pinching, typing or otherwise working, primarily with fingers rather than with the whole hand as in handling. Lifting. Raising objects from a lower to a higher position or moving objects horizontally from position-to-position. This factor is important if it occurs to a considerable degree and requires substantial use of upper extremities and back muscles. Safety Requirements All employees are required to follow the site EHS procedures and Coherent A&D EHS standards. Quality and Environmental Responsibilities Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System. Culture Commitment Ensure adherence to company's values (ICARE) in all aspects of your position at Coherent A&D: Integrity - Create an Environment of Trust Collaboration - Innovate Through the Sharing of Ideas Accountability - Own the Process and the Outcome Respect - Recognize the Value in Everyone Enthusiasm - Find a Sense of Purpose in Work Coherent A&D is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. This role involves access to technology, materials, software, or hardware subject to U.S. export control laws. Therefore, to be considered, candidates must be classified as a “U.S. Person” under applicable regulations or be eligible for authorization under a U.S. government export license.

At Polaris Inc., we have fun doing what we love by driving change and innovation. We empower employees to take on challenging assignments and roles with an elevated level of responsibility in our agile working environment. Our people make us who we are, and we create incredible products and experiences that empower us to THINK OUTSIDE. As an Assembler you will work within a team to to build Walker Evans shocks from start to completion. In this role, you'll utilize various hand and power tools, following work instructions to achieve our Polaris quality standards. If you enjoy being a part of a team and using your problem-solving skills, then this is the role for you. Core Responsibilities * Perform mechanical assembly of products with complex functions requiring independent judgment * Understand and follow established procedures and processes to safely produce quality parts * Recognize, communicate and document safety concerns * Troubleshoot and adjust to build a quality product * Perform housekeeping and 5S to keep the department clean, safe, and well organized * Complete work documentation accurately such as production orders, tags, and quality sheets Education and Experience * High school diploma, GED or equivalent preferred but not required * Technical Degree within a related field from an accredited institution or 0-2 years of related mechanical assembly experience * Must be familiar with a variety of concepts, practices, and procedures within mechanical assembly * Related manufacturing experience is preferred * Must be legally authorized to work in the United States without sponsorship Required Physical Demands: * Routinely lifts up to 40 pounds individually * Works in multiple positions during a shift * Ability to stand for a 10 hour shift Environmental Exposures: * Routinely and regularly works near moving mechanical parts * Occasionally exposed to hot conditions * Occasionally exposed to non-toxic fumes * Moderate noise level * Occasionally exposed to oil, grease, gasoline, dust, metal particles and sharp edged materials Safety Requirements: * Exposed to hazards/risks that require body protection (gloves, pants, steel toes, sleeves, safety glasses, etc.) The starting pay range for California is $17.00 to $22.00 per hour, plus eligibility for overtime. Individual pay and positioning within the range are determined through a wide variety of factors including but not limited to education, experience, knowledge, skills, and geography. While individual pay could fall anywhere in the range based on these factors, it is not common to start at the high end or top of the range. To qualify for this position, former employees must be eligible for rehire, and current employees must be in good standing. We are an ambitious, resourceful, and driven workforce, which empowers us to THINK OUTSIDE. Apply today! At Polaris we put our employees first, by offering a holistic approach to their health and financial wellbeing. Polaris is proud to offer competitive compensation, including a market-leading profit-sharing plan that is fundamental to our pay-for-performance culture. At Polaris, employees are owners of the company through company contributions to our Employee Stock Ownership Plan and discounted employee stock purchases plan. Employees receive a generous matching contribution to 401(k), financial wellness education and consultation to plan for their financial future. In addition to competitive pay, Polaris provides a comprehensive suite of benefits, including health, dental, and vision insurance, wellness programs, paid time off, gym & personal training reimbursement, life insurance and disability offerings. Through the Polaris Foundation and our Polaris Gives paid volunteer time off, we support employees who actively volunteer their time, efforts, and passions to improve the health and wellbeing of the communities in which they live, play and work. Employees at Polaris drive our success and are rewarded for their commitment. About Polaris As the global leader in powersports, Polaris Inc. (NYSE: PII) pioneers product breakthroughs and enriching experiences and services that have invited people to discover the joy of being outdoors since our founding in 1954. Polaris' high-quality product line-up includes the Polaris RANGER, RZR and Polaris GENERAL side-by-side off-road vehicles; Sportsman all-terrain off-road vehicles; military and commercial off-road vehicles; snowmobiles; Indian Motorcycle mid-size and heavyweight motorcycles; Slingshot moto-roadsters; Aixam quadricycles; Goupil electric vehicles; and pontoon and deck boats, including industry-leading Bennington pontoons. Polaris enhances the riding experience with a robust portfolio of parts, garments, and accessories. Proudly headquartered in Minnesota, Polaris serves more than 100 countries across the globe. *************** EEO Statement Polaris Inc. is an Equal Opportunity Employer and will make all employment-related decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, national origin, age, disability, marital status, familial status, status with regard to public assistance, membership or activity in a local commission, protected veteran status, or any other status protected by applicable law. Applicants with a disability that are in need of an accommodation to complete the application process, or otherwise need assistance or an accommodation in the recruiting process, should contact Human Resources at ************ or ******************************. To read more about employment discrimination protection under U.S. federal law, see: Know Your Rights: Workplace Discrimination is Illegal (eeoc.gov).

Assembles materials and products manually, operates auxiliary equipment and performs quality functions to ensure product meets quality criteria. Follow all work processes implemented in the department, all safety and company guidelines as outlined in Cambro employee handbook. ESSENTIAL JOB FUNCTIONS Ensures quality standards are maintained in handling, packaging and finishing of all products assembled/packaged. Comply with safety, operating policies, procedures regarding equipment, materials, and finished goods. Performs sanding, polishing, cleaning, assembly and packing job tasks as assigned. Ensures correct quantity of product per carton and proper assembly/packaging requirements are followed. Read and follow assembly schedule, write tickets and make labels, W.I.P., or products accurately. Verifies box and UPC label accuracy with packaged product. Fills out and maintains required data on production-related forms. Inspects the product at each step of the secondary and/or packaging process for quality defects. Performs necessary post-molding operations and rework as required to adhere to quality standards. Flexible to work on all packing/assembly operations Maintains a clean and organized workstation. Maintains strict housekeeping guidelines and safety practices at all times. Recognize and report any problems, issues, discrepancies, or questions to Process Technician and/or Supervisor in a timely fashion. Must be able to read and understand instructions for assembly, packaging and operating secondary machinery. Maintain reliable and consistent attendance, including being punctual, and dependable in order to meet the needs of the department and the organization. Execute each essential duty satisfactorily in order to perform job successfully. Follows all safety procedures required in work area, wears PPE as needed, attends all safety meetings, and reports safety issues regarding equipment or unsafe/hazardous conditions. Performs effectively as a team member, able to work well with others, open to receive and give feedback, and treats everyone with respect. Takes ownership of own work and behavior, accepts accountability for own actions, encourages solutions, and communicates status of work/projects. Follow all department quality standards/criteria. Raise concerns and issues to immediate manager. Able to understand and demonstrate Cambro company culture, display company core values (Safety, Quality, Respect, and Service). Understands department's key performance indicators and contributes to achieve these goals both individually and as a team. Other duties as needed or required. ADDITIONAL RESPONSIBILITIES Must be able to work overtime as needed, remain flexible and open to possible schedule changes in order to meet business needs. REQUIRED QUALIFICATIONS The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High school diploma or general education degree (GED); or up to six months related experience; or equivalent combination of education and experience. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to speak effectively with employees of organization. Must be a good team player, self-motivated and open-minded. Must be able to work with minimal supervision, meet and maintain high quality work standards, and adapt quickly to new projects/assignments. Must be able to work any shift as needed. PREFERRED QUALIFICATIONS English preferred PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sitting, walking, standing, bending at the neck, bending at the waist, squatting, climbing, kneeling, crawling, twisting at the neck and waist, repetitive use of hands, simple grasping, power grasping, fine manipulation, pushing and pulling, reaching above and below the shoulder, carrying/lifting up to 50 lbs. Driving cars, trucks, forklifts and other equipment Working around equipment and machinery Exposure to excessive noise Exposure to dust, gas, fumes or chemicals Working at heights Use of special visual or auditory protective equipment Walking on uneven ground Operation of foot controls or repetitive foot movement Risk of exposure to bio-hazard while working such as: bloodborne pathogens, sewage, hospital waste, etc. PPE REQUIREMENTS Safety glasses Utility gloves Steel-toe slip-resistant shoes Hardhat Hearing protection (e.g. ear plugs, ear muffs) Face shields Face covering (mask) in accordance with company policy. Mfg Assembler COMPENSATION RANGE: Salary may vary based on experience. CAMBRO is proud to be an equal-opportunity workplace. All qualified applicants will receive consideration for employment without regard to and will not be discriminated against based upon race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic information, military or veteran status, or other characteristics protected by law.

Preferred Job Qualifications: Previous experience in aerospace manufacturing or related industries familiarity with inspection processes and basic quality standards Ability to perform polishing and cleaning and packaging with attention to detail. Forklift certification or proven forklift operating experience. Ability to safely lift and move materials as required. Strong organizational and time management skills valid driver's license with a clean driving record Ability to follow written and verbal instructions accurately. Commitment to safety protocols and workplace cleanliness Strong teammate skills with the ability to work independently when needed. Physical and Mental Requirements: Able to lift 25 pounds regularly. Ability to sit or stand for extended periods. Must be adaptable to a constantly changing environment and perform well under deadlines. Experience and Education: Previous experience in a similar role is preferred but not required. Must demonstrate the ability to learn and apply new skills effectively. We are looking for motivated individuals who can contribute to our team-oriented environment and handle the demands of a high-paced production setting. Please note that this job description is not exhaustive. Management reserves the right to add, modify, change, or rescind work assignments or different positions and to make reasonable adjustments to ensure qualified employees can perform the essential functions of the job. Hourly Rate of Pay: $18.00/ hour to $20.00/ hour **Please note that the salary range information is only applicable to California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Equal Opportunity Employer: Western Precision Aero is an Equal Opportunity Employer and all employees of RBC are subject to E-Verity. Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident) or a Foreign Person for whom a license is obtained.

Job Description ASSEMBLER - ELECTRONICS/MECHANICAL Openings: 6 openings to start ASAP Shift: 1st shift and 2nd shift available QUALIFICATIONS 2+ years of electronics or mechanical assembly in a manufacturing environment Available to start ASAP Willing to start at $18 to $19 an hour pay rate with potential increase based on performance Summary: The Assembler II role is an experienced position responsible for performing more complex PCB assembly tasks, including working with detailed work instructions, interpreting technical drawings, and using specialized tools and equipment. This role involves assembling and inspecting circuit board components, performing basic troubleshooting, and ensuring all work meets quality and IPC standards. Success in this position requires advanced manual dexterity, strong attention to detail, solid understanding of PCB assembly processes, and the ability to collaborate effectively within a fast-paced production environment. Responsibilities: Set up and operate automated and manual prep equipment within the department. Insert and install through-hole components, including capacitors, resistors, ICs, and connectors per work instructions and engineering drawings. Utilize a variety of hand tools to support through-hole assembly and minor part-fitting operations such as filing or crimping. De-panel individual circuit boards from arrays as required. Create and apply labels, including serial numbers and revision identifiers, according to work instructions. Perform high-volume, routine, and repetitive assembly tasks while maintaining accuracy and quality. Conduct inspections and quality checks to ensure products meet internal standards and customer requirements. Qualifications: High School Diploma or equivalent required. 2-4 years of assembly experience (manufacturing or assembly environment) Ability to read and follow work instructions in English. Strong attention to detail and willingness to learn. Demonstrate strong manual dexterity for handling small components and performing precision assembly tasks. Experience using a variety of hand tools and specialized assembly equipment IPC-610 and/or J-STD-001 Certification preferred but not required. Work under the guidance of senior personnel and participate in ongoing training to develop proficiency in the functional area. Company DescriptionWe're not just a staffing company - we're a people company. At Amtec, we care about helping you reach your unique career goals. Since 1959, we've changed the lives of thousands of people for the better - people just like you. It's our purpose to help you find meaningful work by matching your character, competence, and culture with an organization that truly values what you have to offer.Company DescriptionWe're not just a staffing company - we're a people company. At Amtec, we care about helping you reach your unique career goals. Since 1959, we've changed the lives of thousands of people for the better - people just like you. It's our purpose to help you find meaningful work by matching your character, competence, and culture with an organization that truly values what you have to offer.

Requirements THRIFT STORE FLOOR PRODUCTION WORKER (PART-TIME) EXPERIENCE/EDUCATION/LICENSURES/CERTIFICATIONS: High school diploma or equivalent, required. Thrift store, warehouse, assembly line or restaurant experience, a plus. THRIFT STORE FLOOR PRODUCTION WORKER (PART-TIME) KNOWLEDGE/ SKILLS/ ABILITIES: Fluency in Spanish, both verbal and written, a plus. Ability to demonstrate a strong work ethic. Perform in a fast-paced environment and possess strong organizational skills. Ability to determine the value of donations. Must exhibit strong customer service skills. Clear communication skills, both written and oral. Excellent time management skills and detail oriented. Ability to multi-task in a high-volume environment. Must be an effective team member. Must be able to work a flexible schedule, including weekends. #ZR Salary Description $17.87 - $19.40 (depending on experience)

Temp To Full-Time Skillset Group is seeking a Wire Harness Assembler to work in the Irvine, CA area. This position will under shop supervision the Inspect and perform work in accordance with IPC-A610 and other quality standards as needed. This will be a 1st shift position and will be contract to hire. To apply email: *************************

Under minimum supervision, optical and mechanical assembly performs moderate complexity, sometimes requiring fitting, alignment and adjustment of optical/mechanical components and sub-assemblies. Capable of working with very close tolerances. Primary Duties & Responsibilities Optical-Mechanical Assembly Clean and assemble various optical parts, opto-mechanical sub-assemblies, and large assemblies. Use of hand tools requiring above average level of manual dexterity and knowledge of proper procedures. Solder onto various parts as required by assembly instructions. Direct handling and cleaning of delicate optical components. Familiarity with weighing, mixing, and outgassing RTV's, epoxies, and adhesives. Understanding and usage of different chemicals and solvents. Skills & Other Requirements Mathematical Skills Ability to calculate figures and perform simple addition, subtraction, multiplication and division of whole numbers, decimals and fractions. Ability to use a scientific calculator and perform basic calculations. Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to communicate in English and speak effectively before small groups of employees in the organization. Reasoning Ability Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Ability to anticipate problems and proactively identify potential problems. Primary Duties & Responsibilities • High School Diploma or (GED) • Work Experience - Minimum of 2 years of experience in similar assembly operation. High level of manual dexterity, knowledge of a wide variety of hand tools, and knowledge of soldering. Working Conditions Regularly required to: Sit, use hands and fingers, and reach with hands and arms Demonstrate a high level of manual dexterity and care when handling delicate parts Frequently required to: Talk and hear Stand, walk, stoop, kneel, crouch, or crawl Physical Requirements Must be able to lift and/or move: Up to 10 pounds frequently Up to 50 pounds occasionally, with or without assistance Vision requirements include: Close vision, distance vision, depth perception, and ability to adjust focus Ability to inspect parts using an eye loupe and read small graduations on a micrometer and depth gauge Must be able to wear safety gear for extended periods of time Safety Requirements All employees are required to attend scheduled training, follow the site EHS procedures and Corporate EHS standards. This includes the use of proper protective equipment (PPE) as required by the job responsibilities. Managers will ensure that all safety and environmental procedures are followed consistently. They will ensure that risk assessments are performed, proper training, work instructions, required PPE is available, and will monitor compliance. Quality & Environmental Responsibilities Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System. Culture Commitment Ensure adherence to company's values (ICARE) in all aspects of your position at Coherent Corp.: Integrity - Create an Environment of Trust Collaboration - Innovate Through the Sharing of Ideas Accountability - Own the Process and the Outcome Respect - Recognize the Value in Everyone Enthusiasm - Find a Sense of Purpose in Work Coherent Corp. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. To conform to U.S. Government export regulations (ITAR), applicant must be a U.S. person, lawful permanent resident of the U.S., protected individual as defined by 8. U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State." If you need assistance or an accommodation due to a disability, you may contact us at ****************************** .

At Polaris Inc., we have fun doing what we love by driving change and innovation. We empower employees to take on challenging assignments and roles with an elevated level of responsibility in our agile working environment. Our people make us who we are, and we create incredible products and experiences that empower us to THINK OUTSIDE. As an Assembler you will work within a team to to build Walker Evans shocks from start to completion. In this role, you'll utilize various hand and power tools, following work instructions to achieve our Polaris quality standards. If you enjoy being a part of a team and using your problem-solving skills, then this is the role for you. Core Responsibilities Perform mechanical assembly of products with complex functions requiring independent judgment Understand and follow established procedures and processes to safely produce quality parts Recognize, communicate and document safety concerns Troubleshoot and adjust to build a quality product Perform housekeeping and 5S to keep the department clean, safe, and well organized Complete work documentation accurately such as production orders, tags, and quality sheets Education and Experience High school diploma, GED or equivalent preferred but not required Technical Degree within a related field from an accredited institution or 0-2 years of related mechanical assembly experience Must be familiar with a variety of concepts, practices, and procedures within mechanical assembly Related manufacturing experience is preferred Must be legally authorized to work in the United States without sponsorship Required Physical Demands: Routinely lifts up to 40 pounds individually Works in multiple positions during a shift Ability to stand for a 10 hour shift Environmental Exposures: Routinely and regularly works near moving mechanical parts Occasionally exposed to hot conditions Occasionally exposed to non-toxic fumes Moderate noise level Occasionally exposed to oil, grease, gasoline, dust, metal particles and sharp edged materials Safety Requirements: Exposed to hazards/risks that require body protection (gloves, pants, steel toes, sleeves, safety glasses, etc.) The starting pay range for California is $17.00 to $22.00 per hour, plus eligibility for overtime. Individual pay and positioning within the range are determined through a wide variety of factors including but not limited to education, experience, knowledge, skills, and geography. While individual pay could fall anywhere in the range based on these factors, it is not common to start at the high end or top of the range. To qualify for this position, former employees must be eligible for rehire, and current employees must be in good standing. We are an ambitious, resourceful, and driven workforce, which empowers us to THINK OUTSIDE. Apply today! At Polaris we put our employees first, by offering a holistic approach to their health and financial wellbeing. Polaris is proud to offer competitive compensation, including a market-leading profit-sharing plan that is fundamental to our pay-for-performance culture. At Polaris, employees are owners of the company through company contributions to our Employee Stock Ownership Plan and discounted employee stock purchases plan. Employees receive a generous matching contribution to 401(k), financial wellness education and consultation to plan for their financial future. In addition to competitive pay, Polaris provides a comprehensive suite of benefits, including health, dental, and vision insurance, wellness programs, paid time off, gym & personal training reimbursement, life insurance and disability offerings. Through the Polaris Foundation and our Polaris Gives paid volunteer time off, we support employees who actively volunteer their time, efforts, and passions to improve the health and wellbeing of the communities in which they live, play and work. Employees at Polaris drive our success and are rewarded for their commitment. About Polaris As the global leader in powersports, Polaris Inc. (NYSE: PII) pioneers product breakthroughs and enriching experiences and services that have invited people to discover the joy of being outdoors since our founding in 1954. Polaris' high-quality product line-up includes the Polaris RANGER , RZR and Polaris GENERAL™ side-by-side off-road vehicles; Sportsman all-terrain off-road vehicles; military and commercial off-road vehicles; snowmobiles; Indian Motorcycle mid-size and heavyweight motorcycles; Slingshot moto-roadsters; Aixam quadricycles; Goupil electric vehicles; and pontoon and deck boats, including industry-leading Bennington pontoons. Polaris enhances the riding experience with a robust portfolio of parts, garments, and accessories. Proudly headquartered in Minnesota, Polaris serves more than 100 countries across the globe. *************** EEO Statement Polaris Inc. is an Equal Opportunity Employer and will make all employment-related decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, national origin, age, disability, marital status, familial status, status with regard to public assistance, membership or activity in a local commission, protected veteran status, or any other status protected by applicable law. Applicants with a disability that are in need of an accommodation to complete the application process, or otherwise need assistance or an accommodation in the recruiting process, should contact Human Resources at ************ or ****************************** . To read more about employment discrimination protection under U.S. federal law, see: Know Your Rights: Workplace Discrimination is Illegal (eeoc.gov) .

Job DescriptionDescription: COMPANY DESCRIPTION: Union Rescue Mission (URM) is a 501(c)(3) nonprofit organization located in the Los Angeles Metropolitan Area. We are dedicated to serving men, women, and children experiencing homelessness and providing comprehensive emergency and long-term services to help them escape the dangerous streets of Skid Row. Established in 1891, URM is now one of the largest rescue missions of its kind in the United States and the oldest in Los Angeles. Join us at Union Rescue Mission as we bring hope and share the compassion of Christ to those devastated by homelessness. POSITION SUMMARY: Under the supervision of the Thrift Store Manager, the Thrift Store Floor Production Worker (Part-Time) is responsible for assisting the production crew in cleaning, prep, and tagging merchandise such as bric-a-brac, books, electronics, shoes, accessories, household items, etc. CORE WORK PRINCIPLE: Colossians 3:23 is the foundation of URM's standard for employment, “Whatever you do, work at it with all your heart, as though you were working for the Lord and not for people.” The goal for each employee is to enrich and sustain a humble heart attitude; to enrich and sustain a mindset of serving others, treating them with kindness and truth; and to enrich and sustain a zealous desire for achieving work objectives without any ulterior motives or agendas. THRIFT STORE FLOOR PRODUCTION WORKER (PART-TIME) ESSENTIAL FUNCTIONS: Cleans, tags, and packs merchandise for pricing. Determines which items are perishable and which are recyclable and discards unsellable items. Assists other departments/positions, as needed. Sets the pace for sorting. Records production numbers daily. (i.e., carts, units, etc.) Communicates regularly with management about store issues. Actively engages customers on floor sales to increase donations and merchandise sales. Ensures monthly revenue goals are met. Provides excellent customer service by greeting and assisting customers and donors; and responds to customer inquiries/complaints in a timely manner. Ensures store and displays are maintained, clean, and attractive. Maintains safety including all Health and Security policies and procedures. Conducts tasks and other projects as assigned by the Store Manager. Commitment to URM mission, vision, and core values. Encourages guests in their faith and growth in Jesus Christ. THRIFT STORE FLOOR PRODUCTION WORKER (PART-TIME) PHYSICAL DEMANDS: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to allow differently able individuals to perform the essential functions of the job. Must be able to lift 50 lbs. Requires manual dexterity for regular repetitive finger motion such as frequent reaching, pulling, pushing and lifting objects and operating equipment. Requires manual ability to operate a pallet jack. May be exposed to handling hazardous materials such as broken glass. THRIFT STORE FLOOR PRODUCTION WORKER (PART-TIME) WORK ENVIRONMENT: In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to allow differently able individuals to perform the essential functions of the job within the environment. The office is clean, orderly, properly lighted, and ventilated. This position works predominantly indoors in a store, warehouse, or dock environment all of which are high traffic settings involving people, equipment and/or machinery. May be exposed to dust in the performance of certain duties. Noise levels are considered moderate to high. Requires regular standing, walking, sitting, crouching, stooping, speaking, hearing, and seeing. May be exposed to extreme temperatures both hot and cold (variable weather). Requirements: THRIFT STORE FLOOR PRODUCTION WORKER (PART-TIME) EXPERIENCE/EDUCATION/LICENSURES/CERTIFICATIONS: High school diploma or equivalent, required. Thrift store, warehouse, assembly line or restaurant experience, a plus. THRIFT STORE FLOOR PRODUCTION WORKER (PART-TIME) KNOWLEDGE/ SKILLS/ ABILITIES: Fluency in Spanish, both verbal and written, a plus. Ability to demonstrate a strong work ethic. Perform in a fast-paced environment and possess strong organizational skills. Ability to determine the value of donations. Must exhibit strong customer service skills. Clear communication skills, both written and oral. Excellent time management skills and detail oriented. Ability to multi-task in a high-volume environment. Must be an effective team member. Must be able to work a flexible schedule, including weekends. #ZR