Assembly technician jobs in Burbank, CA - 493 jobs

The primary responsibility of the Production Technician II will be to test/assemble Small Unmanned Arial System products in our manufacturing facility following released engineering drawings and assembly instructions using our work order system. Position Responsibilities Primary duty is the mechanical assembly of subassemblies using small hand and/or power tools. Some soldering may be required Final assembly of ground control equipment and air vehicles Testing and troubleshooting of subassemblies and final assemblies Works with other Production Technicians and Engineering to correct and improve upon any documents related to the assembly process at the required high quality standard Works with manufacturing engineers to improve assembly efficiency, improve product quality, reduce manufacturing costs and validate released assembly/ fabrication documentation Responsible for ensuring that work order protocols are followed and that work order paperwork is completed as the work is performed May also train other technicians to build a product or follow an established assembly process May conduct in-process quality checks to ensure that items built are to established high quality standards Follows established procedures on routine work and may require instruction on new assignments Maintains a clean and safe work environment Other duties as assigned Basic Qualifications (Required Skills & Experience) High School diploma or GED equivalent is required or equivalent combination of education, training, and experience Minimum of 1 - 2 years of experience in a manufacturing or production environment in either electronics or electro-mechanical assembly and test or equivalent combination of education, training, and experience Experience with hand tools, including crimpers, drills, taps, torque wrenches, power tools and air tools is required Ability to read blueprints and schematics is desired Ability to solder as part of assembly function and duties Must have good manual dexterity and basic computer operation skills Must have strong oral and written communication skills to communicate effectively with employees in the Company Strong analytical, problem-solving skills and attention to detail with ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form Other Qualifications & Desired Competencies Vocational training in Electronics or Solder Certification is preferred Versed in Lean Manufacturing methodologies is desired Familiarity with Safety and ESD practices is desired Work with engineering on new product development efforts where documentation and assembly instructions are not yet finalized Applies acquired job skills, company policies and procedures to complete assigned tasks under minimal supervision Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties Displays strong initiative and drive to accomplish goals and meet company objectives Takes ownership and responsibility for current and past work products Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company Focuses on teamwork, collaboration and puts the success of the team above one's own interests Physical Demands Ability to work in a manufacturing environment Ability to frequently use hand tools (e.g. clamps) using light, minimal force Regularly required to sit for long periods and occasionally stand for short periods Frequently lift and/or carry objects of small size between 2lbs and 5lbs Frequently required to use hand to finger, handle, or feel objects, tools, or controls and balance Occasionally required to walk Occasionally required to reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus Clearance Level Clearance Level The salary range for this role is: $17 - $24 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship required

Salary Range: $18.50 - $25.90 1st shift: 6am - 2:30pm This position performs assembly work of a moderately complex nature with pre-cut, drilled and edged materials to produce a quality finished good of specified materials, dimensions, and color. Responsibilities and Essential Functions: * Assembles all components and fixtures of manufactured products in the warehouse, in a timely manner that meets the production schedule and quality requirements. * Prepares work to be accomplished by studying assembly instructions, blueprint specifications, and parts lists; gathering parts, subassemblies, tools, and materials. * Positions parts and subassemblies by using templates or reading measurements. * Assembles components by examining connections for correct fit; fastening parts and subassemblies. * Verifies specifications by measuring completed component. * Inspects each product assembled to ensure it meets quality standards. Notifies supervisor about sub-standard quality issues. * Maintains safe and clean working environment by complying with procedures, rules, and regulations. * Conserves resources by using equipment and supplies as needed to accomplish job results. * Contributes to team effort by accomplishing related results as needed. * Contribute to Continuous Improvement initiatives related to work-flow, 5S and overall shop efficiency * Proficiently uses a variety of powered and non-powered hand tools including, but not limited to drill, hammer, screwdriver, and scraper. * Performs other duties as assigned by manager. * Does all of the above in a manner that meets company safety requirements including, but not limited to, wearing safety glasses. Qualifications, Skills and Education: * Experience using basic hand tools. * Must be able to read and use tape measure for precise measurements. * Must have a strong sense of urgency in accomplishing hourly goals. * Must have a basic ability for reading, writing and computer keyboard skills. Perks and Benefits: We hope that you're excited by the possibilities that come along with working at Exemplis! With us, TEAM comes first. We bring integrity, passion, and excellence to work each day. Being part of our team means living our core values and thriving in an environment of constant innovation and positive change. In addition to our unique culture, we also offer these fun perks and benefits. * Competitive Salary: Our compensation philosophy is to be externally competitive, internally fair, and not win or lose on compensation. Salary ranges are developed with the support of national benchmarks and industry best practices that adjusts to your cost of labor, years of relevant experience, skill set, and education. * Employee Discounts: We offer our employees discounts across all of our product lines. * Hit our Numbers Lunch: When we hit our monthly milestones, we all celebrate! About Us: It all started in a small warehouse in California with just three employees, a fax machine and a bell that rang out every time a chair came down the conveyor belt. Over 25 years later, Exemplis continues to lead, innovate and disrupt an array of industries through its growing family of brands - including SitOnIt Seating, Timbuk2, X-Chair, Maverick, Mavix, Edloe Finch, and Albany Park. From sustainable manufacturing to outreach programs and more, we strive to make a positive impact on everyone we serve. We make sure our people (and their communities) are at the core of our organization. To make a difference, we must be a champion of diversity, inclusion, service and social justice - above all else. Are you ready to be a part of something special? We have headquarters, offices and retail stores across the U.S. (plus a variety of flexible work opportunities). Learn more and apply today. Exemplis is an Equal Opportunity Employer and our company adheres to the equal employment opportunity guidelines set forth by federal, state, and local laws. Read our full statement on our careers page.

Job DescriptionDescription: Advanced Cooling Technologies, Inc. (ACT) is a premier thermal solutions provider providing component and system level solutions and structures. Our products and technologies have become integral parts of numerous mission-critical devices, including life-saving MRI and CT scanners, US Military applications, weather and telecommunication satellites, exploratory space missions, and much more. We are proud to be doing work that really makes a difference in our world- and beyond! Assemblers will be expected to perform numerous assembly and fabrication duties involving advanced composites such as Carbon Fiber, Kevlar, and complex adhesive systems. Because of the nature of spacecraft, and military hardware, all technicians must exhibit a high degree of discipline and work ethic. Assembly Technicians must have expansive experience with Aerospace composite assembly and fabrication and must be willing and able to perform a wide range of fabrication duties with a high degree of craftsmanship. Senior technicians are also expected to be innovative, versatile, and provide both leadership and training to junior technicians. Responsibilities: Assemble aircraft components and subassemblies according to manufacturing plans, drawings, specifications, and instructions Attach mechanical fasteners and other hardware onto components or subassemblies using rivets, screws, adhesives, or other fasteners Prepare surfaces for bonding by light sanding Perform masking operations on composite and metallic components, and subassemblies, for priming operations Perform edge and core filling operations as required for final assemblies Identify parts (part marking) as required by customer specifications Ensure that the materials used in fabrication meet the required specification and shelf-life requirements Clean fabricated parts when required, as required, during fabrication operations Requirements: High School Diploma or Equivalent Ability to operate in a fast-paced environment and contribute immediately upon hire Must be a US Person as defined by 22 C.F.R. §120.15? (U.S. Citizen, lawful permanent resident, refugee or asylee) Composite experience gained within an aviation manufacturing or aerospace company High volume manufacturing experience is a plus Must have a high level of technical skills to perform job duties Must be able to read blueprints and manufacturing instructions Must have operational knowledge of basic measurement tools: scales & calipers We offer an attractive and competitive compensation/benefits package, which includes a profit-sharing bonus plan. Our work environment is comfortable, collaborative, and stimulating. Apply now to get started on a career with ACT! If you are looking for an opportunity to start a career with a growing company doing exciting and important work, please apply today! ACT is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as a qualified individual with a disability, or any other trait protected by law. E-verify employer.

Astrophysics Inc. is a global leader in X-Ray security inspection systems, dedicated since 2002 to making the world safer through advanced screening technology. Our systems protect critical infrastructure in over 150 countries, serving airports, government buildings, military bases, and more. We are a fast-growing, dynamic company seeking a Mechanical Assembly Lead to join our headquarters in City of Industry, CA. Job Summary: The Mechanical Assembly Lead is responsible for actively participating in and coordinating mechanical assembly operations on the production floor. In addition to performing hands-on assembly tasks, the Lead supports a team of mechanical assemblers to ensure production goals, quality standards, and safety protocols are met. This role requires a strong mechanical background, leadership through example, and effective communication with both team members and management. Essential Functions: Perform mechanical assembly tasks in accordance with written instructions and specifications. Coordinate daily activities and task assignments within the mechanical assembly team. Support team members by answering questions, clarifying instructions, and assisting with troubleshooting. Ensure any deviations from written instructions are documented and communicated to the floor supervisor and manufacturing engineer. Help maintain production flow and meet schedule targets by working alongside the team. Train and mentor new assemblers on tools, techniques, and safety procedures. Conduct informal quality checks and help identify areas for improvement. Collaborate with engineering and production teams to resolve technical issues. Maintain clear documentation of assembly processes, deviations, and feedback. Foster a collaborative and safety-conscious work environment. Education and Experience: 5+ years of experience in mechanical assembly or production operations Excellent organizational and time-management skills Experience working in a team-oriented manufacturing environment Strong mechanical aptitude and familiarity with tools, components, and assembly techniques Ability to read and interpret technical drawings, schematics, and written instructions Effective communication and interpersonal skills Position Type/Expected Hours of Work: Non-exempt Full-Time Hours: 7:00am- 3:30pm (Hours subject to change depending on the needs of the business) Benefits & Perks: Excellent medical, dental and vision benefits 401K plan with 4% employer match 11 paid holidays, 10 PTO days Free donuts on Fridays, company luncheons and year end party! Be part of a meaningful security mission with opportunities for personal and professional growth and development. Join our Astrophysics family today! Equal Opportunity Employer Astrophysics Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability. For accommodation requests, please contact Human Resources at **************.

Dreaming big is in our DNA. It's who we are as a company. It's our culture. It's our heritage. And more than ever, it's our future. A future where we're always looking forward. Always serving up new ways to meet life's moments. A future where we keep dreaming bigger. We look for people with passion, talent, and curiosity, and provide them with the teammates, resources and opportunities to unleash their full potential. The power we create together - when we combine your strengths with ours - is unstoppable. Are you ready to join a team that dreams as big as you do? SALARY: $33.83/hr + 4.25 hours of daily OT SHIFT: 12 hours (rotating days/nights) every quarter COMPANY: Michelob ULTRA. Cutwater Spirits. Budweiser. Kona Brewing Co. Stella Artois. Bud Light. That's right, over 100 of America's most loved brands, to be exact. But there's so much more to us than our top-notch portfolio of beers, seltzers, and more. We are powered by a 19,000-strong team that shares our passion to create a future with more cheers. We look for people with talent, curiosity, and commitment and provide the teammates, resources and opportunities to unleash their full potential. The power we create together - when we combine your strengths with ours - is unstoppable. Are you ready to join a team that dreams as big as you do? ROLE SUMMARY: Sitting behind a desk all day was never your style. Rolling up your sleeves and solving tangible problems? That's more like it. If you are passionate about maintenance and troubleshooting while working in a fast paced environment, Anheuser-Busch could be your last stop in fulfilling your career. Our Maintenance Technicians are the key in guaranteeing that our quality is where it needs to be: the very best. If you are looking for a new challenge, come join our team today! As a Maintenance Technician, you will operate, maintain, troubleshoot, and repair high speed manufacturing equipment. You would also be responsible to perform quality checks by using powerful quality reporting systems. If you think you've got what it takes, we want to hear from you! JOB RESPONSIBILITIES: Operate, maintain troubleshoot and repair high speed manufacturing equipment Responsible for prioritization of operation and maintenance on multiple pieces of manufacturing equipment Perform quality checks and recording them in our automated quality control systems Interpret data to make quality and productivity decisions, we're a data driven company Perform routine and emergency maintenance on process equipment Maintain our work area in accordance with all sanitation and housekeeping standards, safety is our first priority JOB QUALIFICATIONS: High School Diploma or GED 1-3 years of industrial experience, preferably in a high-speed manufacturing or packaging environment Proficient in mechanical troubleshooting Able and willing to work a rotating 12-hour and other alternate work schedule, including day and night shift rotations, and required weekend and holiday hours Able and willing to work mandatory overtime as required Superior work history, including good attendance Knowledge of safety policies and procedures WHY ANHEUSER-BUSCH: At Anheuser-Busch, our purpose is to create a future with more cheers. For more than 165 years, we have delivered a legacy of brewing great-tasting, high-quality beers that have satisfied beer drinkers for generations. 99 percent of the products we sell in the U.S are made in the U.S. with more than $700 million in high-quality ingredients sourced from American farmers and more than $7 billion in goods and services purchased from U.S. suppliers, and we have invested nearly $2 billion in our 100 facilities across the country over the past five years. Through these investments, and as a leading American manufacturer and the nation's top brewer, we drive economic prosperity nationwide through investments in our people, facilities, and communities. We are the only brewer that invests in the U.S. at this scale. BENEFITS: Health benefits including Medical, Dental, Vision, Wellness and Tax-Advantaged Savings and Spending Accounts Life Insurance and Disability Income Protection 401(k) Retirement Savings options with a company matching contribution Chance to work in a fast-paced environment among a company of owners Free Beer! #AC-E

The Assembler I has ownership of the assembly stations assigned. They are responsible for safety, efficiency, quality, and overall productivity. The Assembler I will be expected to perform basic and intermediate assembly processes at within the department. ESSENTIAL JOB FUNCTIONS Follow a prism-based schedule. Ability to properly assemble basic and intermediate components within the Roto department which includes but is not limited to cleaning parts, tapping inserts, bolting and/or using self-tapping screws to secure components to main body part. Order and control hardware and ensure all is inventory is accounted for. Ability to recognize and follow departmental quality guidelines. Perform all aspects of product packaging including boxing, labeling, taping, stapling and stacking cartons using established pallet patterns. Knowledge of using basic hand and power tools. Maintains a personal efficiency rating in accordance with Key Performance Targets not to fall below 100%. Willing to cross train as needed in all the assembly cells which include non-Foam line, Ingredient Bin line, LCD line, Ferry 11-line, Bus Cart line, Kits, Packs, Food Bar & FSG line, Routing, Re-box area. Print labels using computers and proper application methods. Perform FG (finished goods) transactions with all associated labeling requirements. Follow all established assembly procedures and work instructions. Access the ESP program via computer. Ability to follow verbal assembly instructions and repeat processes. Adjusting to different work assignments throughout the workday. Maintain reliable and consistent attendance, including being punctual, and dependable in order to meet the needs of the department and the organization. Execute each essential duty satisfactorily in order to perform job successfully. Follows all safety procedures required in work area, wears PPE as needed, attends all safety meetings, and reports safety issues regarding equipment or unsafe/hazardous conditions. Performs effectively as a team member, able to work well with others, open to receive and give feedback, and treats everyone with respect. Takes ownership of own work and behavior, accepts accountability for own actions, encourages solutions, and communicates status of work/projects. Follow all department quality standards/criteria. Raise concerns and issues to immediate manager. Able to understand and demonstrate Cambro company culture, display company core values (Safety, Quality, Respect, and Service). Understands department's key performance indicators and contributes to achieve these goals both individually and as a team. Other duties as needed or required. ADDITIONAL RESPONSIBILITIES Must be able to work overtime as needed, remain flexible and open to possible schedule changes in order to meet business needs. REQUIRED QUALIFICATIONS The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High school diploma or general education degree (GED); and one-year related experience and/or training; or equivalent combination of education and experience. Ability to communicate in English, both verbally and in writing. Comprehend instructions and communicate effectively. Ability to read and interpret documents such as safety rules and procedure manuals. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. PREFERRED QUALIFICATIONS ERP system experience with Prism, Intermec, and/or AS400 system Bilingual in Spanish. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sitting, walking, standing, bending at the neck, bending at the waist, squatting, climbing, kneeling, crawling, twisting at the neck and waist, repetitive use of hands, simple grasping, power grasping, fine manipulation, pushing and pulling, reaching above and below the shoulder, carrying/lifting up to 50 lbs. Driving cars, trucks, forklifts and other equipment Working around equipment and machinery Exposure to excessive noise Exposure to dust, gas, fumes or chemicals Working at heights Use of special visual or auditory protective equipment Walking on uneven ground Operation of foot controls or repetitive foot movement Risk of exposure to bio-hazard while working such as: bloodborne pathogens, sewage, hospital waste, etc. PPE REQUIREMENTS Safety glasses Utility gloves Steel-toe slip-resistant shoes Hardhat Hearing protection (e.g. ear plugs, ear muffs) Face shields Face covering (mask) in accordance with company policy. Mfg Assembler- ROTO COMPENSATION RANGE: $17.49 - $17.50 Salary may vary based on experience. CAMBRO is proud to be an equal-opportunity workplace. All qualified applicants will receive consideration for employment without regard to and will not be discriminated against based upon race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic information, military or veteran status, or other characteristics protected by law.

Responsibilities Can assemble basic actuators, accumulators & valves. Also performs tests of assembled parts per specifications determined by customer or mandated regulations by performing the following duties. Essential Duties and Responsibilities include the following. Other duties may be assigned. Measures parts to determine specified tolerance. Positions and aligns parts. Bolts, screws, parts together. Disassembles and replaces parts as required. Tests functional performance of assembly. Performs all specific detailed tests required for stress, tolerances and other factors as determined by work order Cleans and lubricates parts and assemblies. Marks identifying information on parts. Qualifications Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience High school diploma or general education degree (GED); or 4 -6 years related experience and/or training; or equivalent combination of education and experience. Hourly rate: $25.09 - $35.42 Our Vision: As one team, we enable the safety and prosperity of the world. Our Mission: We partner with our Customers to TRIUMPH over their hardest aerospace, defense, and industrial challenges to deliver value to our stakeholders. Our Values: * Integrity - Do the right thing for our stakeholders. We value safety, diversity, and respect. * Teamwork - Win as One team-one company. Solicit help and assist others. * Continuous Improvement - Pursue zero defect quality. Attack problems and relentlessly raise the bar. * Innovation - Passion for growing the business. Lead through ingenuity and entrepreneurship. * Act with Velocity - Partner, anticipate and communicate. Proactively solve problems. Code of Conduct: To perform the job successfully, an individual should demonstrate the TRIUMPH behaviors captured within our core values: Integrity, Teamwork, Continuous Improvement, Innovation, and Act with Velocity. Detailed definitions are below and performance metrics for each behavior can be found on our intranet and is embedded within our Performance Management processes. All employees are expected to represent the values and maintain the standards contained in TRIUMPH's Code of Conduct. Environmental, Health, and Safety (EHS): Employees are responsible for the Health, Safety, and Welfare of themselves, the environment, and other people. All employees must comply with EHS policy training and instructions, help to maintain a safe and clean working environment, and use any Personal Protective Equipment (PPE) provided by the Company. Employees must report any accidents, incidents, and near misses to management. Additionally, employees are expected to notify management of any dangerous or potentially dangerous situations or practices. Additional Information: Triumph is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability. SELECT US positions require access to technology, materials, software or hardware that is controlled by US export laws including the International Traffic in Arms Regulations ("ITAR") and the Export administration Regulations ("EAR"). In order to be eligible for applicable positions, you must be a US Person under ITAR or eligible for approval for a U.S. Government export license. A US Person is a US Citizen, Lawful Permanent Resident, refugee or asylee. All inquires related to citizenship are asked solely to comply with ITAR and EAR export licensing requirements. U.S. applicants must be legally authorized to work in the United States without company sponsorship. Please contact us if you require assistance in applying for TRIUMPH and we will provide reasonable accommodations via *****************************. Nearest Major Market: Los Angeles

RH is seeking a skilled and detail-oriented Wood Hardware Assembly Specialist to join our Dennis & Leen/Formations Workshop in Torrance, CA. This role plays an important part in assembling and installing fine hardware on luxury, antique-style furniture pieces. The Wood Hardware Assembly Specialist combines precision craftsmanship with technical expertise, ensuring that every element is secured flawlessly and finished beautifully. In this role, you bring patience, a refined eye for detail, and deep respect for the artistry and heritage that define our timeless designs. YOUR RESPONSIBILITIES Measure, mark, and drill for hardware installation, ensuring precise alignment and secure fit on delicate, high-value furniture Prepare and finish hardware components, including chemical treatments to achieve antique or aged effects that match each piece's design Handle premium, custom, or antique reproduction hardware carefully to avoid scratches or damage during installation Prepare wood surfaces by filling old holes, sanding, and color-matching finishes for seamless results Read and interpret blueprints, drawings, and design specifications to determine correct hardware placement and installation methods Identify wood types, veneers, and finishes to select proper tools and techniques that preserve material integrity Inspect each completed installation for accuracy, function, and aesthetic excellence Maintain and calibrate hand and power tools, including drills, jigs, and measuring devices Troubleshoot and resolve alignment or fitting challenges on unique or vintage furniture pieces Maintain an organized, clean, and safe workspace that protects fine furniture and tools Collaborate with project managers, designers, and other artisans to ensure design intent and quality expectations are met OUR REQUIREMENTS 2+ years of experience in furniture installation, cabinetry, or related fine woodworking disciplines Proficiency with hand and power tools used in precision woodwork and hardware installation Strong manual dexterity and attention to detail when working with delicate or high-value materials Experience interpreting drawings, templates, and measurements accurately Knowledge of traditional furniture construction and antique-style design aesthetics Creative problem-solving skills to address challenges in fitting or restoration projects Professional demeanor and commitment to delivering the highest level of craftsmanship Experience in luxury or custom furniture production preferred PHYSICAL REQUIREMENTS Handles and positions wood furniture components weighing up to 75 lbs. regularly Performs visual inspections and detailed alignment work requiring fine motor control and concentration Stands, bends, and performs repetitive hand movements for extended periods in a workshop environment Works in areas with exposure to dust, adhesives, and finishing materials while adhering to safety and PPE standards Operates precision tools and equipment requiring coordination, balance, and focus

Preferred Job Qualifications: Previous experience in aerospace manufacturing or related industries familiarity with inspection processes and basic quality standards Ability to perform polishing and cleaning and packaging with attention to detail. Forklift certification or proven forklift operating experience. Ability to safely lift and move materials as required. Strong organizational and time management skills valid driver's license with a clean driving record Ability to follow written and verbal instructions accurately. Commitment to safety protocols and workplace cleanliness Strong teammate skills with the ability to work independently when needed. Physical and Mental Requirements: Able to lift 25 pounds regularly. Ability to sit or stand for extended periods. Must be adaptable to a constantly changing environment and perform well under deadlines. Experience and Education: Previous experience in a similar role is preferred but not required. Must demonstrate the ability to learn and apply new skills effectively. We are looking for motivated individuals who can contribute to our team-oriented environment and handle the demands of a high-paced production setting. Please note that this job description is not exhaustive. Management reserves the right to add, modify, change, or rescind work assignments or different positions and to make reasonable adjustments to ensure qualified employees can perform the essential functions of the job. Hourly Rate of Pay: $18.00/ hour to $20.00/ hour **Please note that the salary range information is only applicable to California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Equal Opportunity Employer: Western Precision Aero is an Equal Opportunity Employer and all employees of RBC are subject to E-Verity. Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident) or a Foreign Person for whom a license is obtained.

Job DescriptionAn electro-assembler will be required to wire equipment based upon electrical diagrams. The assembler will need to wire and assemble precisely, neatly, and with organization. Qualifications: Experienced in working with industrial control assemblies Read and understand electrical diagrams Mechanically inclined. Point to point wiring, high and low voltage Electrical component installation experience Equipment panel wiring experience Work independently and with a team Good communication skills Excellent attention to details Potentially some soldering Note: Applicants will be tested on their abilities FULL TIME: Rate: $20-$23/hour Schedule: Mon-Thurs, 6am-4:30pm

Date Issued: Jan 22, 2026 Department: Operations Reports to: Operations Manager This position is responsible for performing electronics assembly and test functions within Capstone Green Energy's production environment, including the assembly, disassembly, testing, and rework of electronic assemblies and related components. The technician will use basic hand tools, measuring devices, and detailed work instructions to ensure products meet defined quality, safety, and performance standards. The role works closely with line leadership and cross-functional partners to identify defective materials, report quality concerns, and surface issues that may impact production flow or product integrity. The technician is expected to accurately follow schematics, visual aids, and written or verbal instructions, complete required data entry, and maintain a clean and organized work area while supporting production schedules and team objectives in a fast-paced manufacturing environment. Duties and Responsibilities * Performs assembly or test functions within assigned electronics assembly production line discipline * Able to assemble, disassemble and rework electronics and related components. * Report defective materials or questionable conditions per standard procedures. * Maintain the work area and equipment in a clean and orderly condition and follow prescribed safety regulations and perform same. * Complete tasks as directed with minimal supervision. Skills and Abilities Required * Use and be familiar with basic hand tools and proper use of the tools * Ability to apply common sense understanding to carry out detailed and uninvolved written or oral instructions. * Ability to deal with problems involving a few concrete variables in standardized situations. * Use and be familiar with assembly and measuring tools, interpret visual aids and must be able to perform simple shop math. * Mechanical and/or electrical aptitude or formalized training. * Ability to do data entry tasks utilizing PCs * Strong work ethic * Ability to thrive in a fast paced, dynamic environment. Education and Experience Desired * High school diploma, or equivalent, highly desired. * Minimum of three years mechanical hands-on experience. * Electronics assembly experience highly desired. * Post-high school education desired. Work Environment * Extensive periods on your feet, and lifting 50 lbs and computer use. * Willingness to work beyond a standard 40-hour workweek. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are subject to possible modification to reasonably accommodate individuals with disabilities. The requirements listed in this document are the minimum levels of knowledge, skills or abilities that the incumbent(s) must possess to successfully perform each duty proficiently. This document does not create an employment contract, implied or otherwise, other than an "at will" relationship.

Honda Racing Corporation USA, a leader in motorsports racing, is seeking several highly organized and detailed oriented Engineers, Technicians and CNC programmer/machinist to joins its racing program in Santa Clarita, CA: Chassis Development Engineer: Test, modify, and evolve hardware systems on race cars and track-focused road cars. Validate durability and performance against technical targets. Report lessons learned and document failures; manage problem resolution. Analyze logged data to identify root causes and devise countermeasures. Collaborate with designers and manage 3rd parties for design changes. Execute testing of countermeasure parts and new vehicle hardware updates. Specify instrumentation, perform data analysis, and write development reports. Innovate new testing tools and methods for track and rig tests. Development Engineer: Create development plans for concepts and components. Oversee full product life cycle from concept to production. Execute required tests and validations to meet project goals. Quality Engineer: Quality Control: Develop inspection protocols, validate measurement equipment. New Product Introduction & Corrective Actions: Lead cross-functional troubleshooting. Non-Conformance Management: Review issues, manage tooling calibration. Advanced Product Quality Planning: Conduct first article inspections, process validation. Data Analysis & Continuous Improvement: Generate reports, plan Six Sigma activities. Engine Dyno Technician: Set up/install/remove engines in test cells, configure instrumentation. Execute dyno tests, maintain equipment, review data, and report issues. Automotive Mechanics/Technicians: Build/rebuild racing chassis and hybrid systems. Perform quality checks, assembly, teardown, and inspection. Train new associates and support race car performance objectives. CNC Programmer/Machinist: Program CNC machines using MasterCam for high-performance engine components. Design fixtures/tooling and manage CNC setup and operation.

About Our Client: Our client, a Fortune 500 Medical Device company, is recognized as one of the “World's Best Workplaces” and a “Best Workplace for Diversity” by Fortune Magazine! This company has climbed to the top, gaining a reputation for both excellence and satisfaction and is hiring individuals who are self-motivated, results driven, and take pride in the impact their work has on patients and healthcare professionals. Key Responsibilities: Supporting and assisting engineers in designing, developing, producing, and testing components and equipment. Preparing detailed technical drawings, schematics, and layouts to support engineering projects. Conducting materials testing, analyzing results, and documenting findings. Performing equipment maintenance, calibration, and mechanical/electrical repairs. Monitoring and testing prototypes, models, and products under development. Writing technical reports, identifying issues, and suggesting corrective solutions. Collaborating with engineers and cross-functional teams to resolve technical problems. Operating, troubleshooting, and maintaining complex instruments, gauges, and testing equipment. Qualifications: Technical training or hands-on experience preferred. Demonstrating experience with complex instruments, testing equipment, and gauges. Applying technical troubleshooting skills to mechanical and electrical systems. Utilizing attention to detail and problem-solving to support engineering projects. Showing knowledge of CAD software or other engineering tools. Applying familiarity with manufacturing processes and product development cycles. Demonstrating effective communication skills in documenting and presenting technical findings. NO C2C CANDIDATES Interested Candidates please apply on our website at https://jobs.jblresources.com. For more information about our services and great opportunities at JBL Resources, please visit our website: https://www.jblresources.com. JBL Resources is proud to have earned the reputation of being a premier provider of top talent professionals in the fields of engineering, human resources, logistics, operations, and supply chain management. As specialists in both permanent placement and contract services, our mission is to help companies and individuals become all they were created to be. **JBL is an Equal Opportunity Employer and E-Verify Company

Spacecraft represent the most pressing unmet need across the entire aerospace industry. As more launch vehicles come online and the cost to orbit decreases, more companies launching payloads to space continue to emerge. For the first time in history, this influx of payload companies combined with reduced launch costs has resulted in a massive increase in need for commercial spacecraft platforms, known as satellite buses. These buses hold the payloads of our customers and are flown on launch vehicles. Apex manufactures these satellite buses at scale using a combination of software, vertical integration, and hardware that is designed for manufacturing. Our spacecraft enable the future of society: ranging from earth observation to communications and more. We'd love for you to join us on our mission of providing humankind access to the galaxy beyond our planet. About the Role Apex Space is seeking a highly skilled and experienced Spacecraft Technician to join our dynamic team. As a Spacecraft Technician, you will play a critical role in the assembly, integration, and testing of our spacecraft. Your expertise in aerospace structures, avionics, and harnessing will be essential in ensuring the successful development and deployment of our advanced space systems. Responsibilities: • Perform assembly, integration, and testing (AIT) activities for satellite and spacecraft development projects, following engineering specifications, procedures, and safety protocols. • Conduct structural assembly and integration tasks, including component installation, mechanical fastening, bonding, and precision alignment. • Integrate avionics systems, including electronic components, sensors, and wiring harnesses, ensuring proper connections, routing, and functionality. • Collaborate closely with engineers and other technicians to troubleshoot and resolve technical issues during assembly and integration activities. • Perform system-level functional tests, including electrical continuity, power distribution, communication, and sensor verification. • Utilize precision measurement tools and equipment to ensure adherence to dimensional requirements and alignment tolerances. • Participate in environmental testing, such as thermal vacuum, vibration, and shock testing, to validate satellite and spacecraft performance and durability. • Support the development and maintenance of assembly and integration procedures, work instructions, and quality documentation. • Ensure compliance with quality standards, industry best practices, and safety regulations throughout the assembly and integration process. • Maintain accurate records of assembly activities, test results, and any anomalies or discrepancies encountered. • Contribute to the continuous improvement of assembly and integration processes, recommending and implementing efficiency enhancements and quality improvements. • Stay updated with the latest advancements and best practices in satellite and spacecraft development and testing methodologies. Requirements: • U.S. Person status is required as this position needs to access export-controlled data. • Minimum 5+ years of experience in satellite or spacecraft assembly and integration, specifically in aerospace structures, avionics integration, and harnessing. • Proficiency in precision assembly techniques, including mechanical fastening, bonding, and alignment. • Strong understanding of aerospace electrical systems, avionics, and wiring harnesses. • Experience in conducting system-level functional tests and troubleshooting electrical and mechanical systems. • Familiarity with environmental testing methods, such as thermal vacuum, vibration, and shock testing. • Working knowledge of precision measurement tools and equipment used in satellite and spacecraft assembly and integration. • Familiarity with quality standards and processes related to aerospace manufacturing. • Ability to interpret engineering drawings, specifications, and technical documents. • Excellent attention to detail, with strong problem-solving and analytical skills. • Ability to work effectively in a team environment, collaborating with engineers and technicians. • Strong commitment to safety, always adhering to safety protocols and guidelines. • Excellent communication skills, with the ability to effectively convey technical information to team members and stakeholders. 2nd Shift Hours: 2PM-10:30PM + 10% shift differential Why Join Apex? Apex believes in creating a work environment that you look forward to embracing every day. Our employees love working at Apex, and we want you to love it too. We're a fast-growing startup backed by $200M in Series D funding, and we invest heavily in our people from day one. What We Offer For Full-time Employees: Shared upside: Receive equity in Apex, letting you benefit from the work you create Best-in-class healthcare: 100% company-paid medical, dental, and vision for you and your dependents, plus $100k life insurance at no cost Comprehensive PTO package to reset and recharge - starting at 15 days vacation, growing to 20+ days annually, plus 10 paid holidays Competitive 401(k) plan with generous matching - 100% match on first 3%, 50% on next 2% 8 weeks paid parental leave plus childcare reimbursement up to $350/day for work-related travel Daily catered lunch and unlimited snacks to keep you fueled throughout the day Vibrant community: Monthly office BBQs, pickleball tournaments, run club, and social gatherings for you and your family Your dream desk setup and all the tools you need to be your most productive self World-class Playa Vista office with EV chargers, with the benefit of in-person collaboration with amazing coworkers and flexibility to integrate work and life Real impact opportunity: Work alongside experts from aerospace, new space, and other cutting-edge industries to make a lasting difference Ready to join a team where your contributions matter and your future is bright? Let's build something extraordinary together. Equal Opportunity Employer Apex Technology, Inc. is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Candidates and employees are always evaluated based on merit, qualifications, and performance. We will never discriminate on the basis of race, color, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status.

**Be visionary** Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. **Job Description** Teledyne Imaging Sensors is an integral member of the new Digital Imaging Segment of Teledyne Technologies. Imaging Sensors provides advanced imaging solutions for a variety of customers, including the DoD, NASA, prime system integrators, and commercial customers. In the civilian space arena, Teledyne sensors are the most advanced sensors on board the Hubble space telescope, and they are also found on board the majority of NASA space probes and ground based telescopes. In the DoD arena, Teledyne sensors are integrated into several major systems for persistent surveillance, chemical detection, and target identification, among others. We are looking for an **Assembly and Test Technician** to join our Space product assembly team! The Assembly and Test Technician works in a cleanroom environment, performing micro-electronics assembly and soldering for production PCBA's, cables, interconnects and camera assemblies. **Your duties would include:** + Performing a wide variety of electrical/mechanical product assembly operations on components, assemblies or sub-assemblies by studying assembly instructions and following blueprint specifications and schematics + Populating PCB's from Work Instructions, Assembly Drawings and Bills of Material, to include Board Mount, soldering and inspection + Assembling detailed and complex components by positioning parts and sub-assemblies to required standards such as J-STD-001/IPC 610 **Required skills include:** + Ability to meet/exceed production schedules and deadlines according to quality standards + Ability to work overtime and weekends as needed + Ability to work in Cleanrooms + Ability to read simple assembly drawings + Knowledge of ESD (Electrostatic discharge) procedures + Basic computer skills, including Microsoft Office + Ability to multi-task and work with general instruction on daily activities **Required Education and Experience:** + HS Diploma or equivalent, plus 3-5 years of relevant work experience + Experience with soldering and mechanical assembly + Experience cleaning PCB's and assemblies throughout process and after completion + Experience maintaining logs, paperwork and forms accurately, consistent with company policy and practices + Experience and certification to J-STD-001, Space Addendum preferred **Citizenship Requirements:** + Due to the type of work at the facility and certain access restrictions, successful applicants must be a U.S. Citizen **Ready to join our team? Apply today!** **_What can Teledyne offer YOU?_** A Competitive Salary & Benefits Package Excellent Health, Dental, Vision, and Life insurance plans as of First Day Paid Vacation and Sick Time Paid Holidays 401(k) Eligibility with Company Match Employee Stock Purchase Plan Educational Tuition Reimbursement Employee Fun Events throughout the year **Salary Range:** $42,800.00-$57,100.000 **Pay Transparency** The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, education/training, work experience, key skills, and type of position. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. You may not realize it, but Teledyne enables many of the products and services you use every day **.** Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.

AnySignal is a startup whose mission is to usher in the next generation of RF products and services. For the most demanding space and defense missions, AnySignal provides a flexible platform with world-class performance that is easy to deploy, monitor, purchase, and upgrade. Our team has a diverse range of backgrounds that cover cloud computing to artificial intelligence, communications and sensing, embedded systems, and much more. About the Role We are seeking a detail-oriented, hands-on Assembly & Test Technician to join our fast-growing production team. You will play a key role in assembling, testing, and preparing our hardware systems for deployment. This role is ideal for someone who enjoys working with mechanical and electronic components, is eager to learn, and thrives in a dynamic, high-precision environment. Soldering expertise is a plus but not required - we value precision, care, and adaptability.What You'll Do Assemble mechanical and electronic components using tools (including torque wrenches) following detailed procedures. Apply staking materials for stability. Use our production tracking software to track builds and workflow. Execute basic test scripts and bash commands on hardware systems. Record, document, and communicate test results clearly and accurately. Collaborate with engineers to troubleshoot and resolve assembly or test issues. Bonus (Not Required) Soldering experience (we'll provide training) and experience handling sensitive PCSs. Basic understanding of electronic debugging or electrical engineering concepts. Prior experience in hardware production environments (aerospace, medical, RF, or similar). Why Join AnySignal?- Work on groundbreaking hardware systems for space and aerospace.- Build meaningful, hands-on skills with the support of a passionate, experienced team.- Receive competitive pay and opportunities for growth.- Be part of a fast-moving startup where your contributions matter. AnySignal values and fosters an inclusive, accessible environment, where all employees and customers feel respected, supported and able to participate. We welcome applications from: women, Aboriginal persons, persons with disabilities, ethnic minorities, visible minorities, veterans, people who identify as LGBTQIA2S+ and others who may contribute to diversification in our environment. Should you have a need for accommodation, AnySignal will endeavor to meet your accommodation needs. At any stage of the recruitment and selection process you may make your needs for accommodation known through contacting our team, in confidence, by email to: *********************. We aim to provide equal access to all applicants with disabilities, please do not hesitate to contact us about accommodations.

Spacecraft represent the most pressing unmet need across the entire aerospace industry. As more launch vehicles come online and the cost to orbit decreases, more companies launching payloads to space continue to emerge. For the first time in history, this influx of payload companies combined with reduced launch costs has resulted in a massive increase in need for commercial spacecraft platforms, known as satellite buses. These buses hold the payloads of our customers and are flown on launch vehicles. Apex manufactures these satellite buses at scale using a combination of software, vertical integration, and hardware that is designed for manufacturing. Our spacecraft enable the future of society: ranging from earth observation to communications and more. We'd love for you to join us on our mission of providing humankind access to the galaxy beyond our planet. About the Role Apex Space is seeking a highly skilled and experienced Spacecraft Technician to join our dynamic team. As a Spacecraft Technician, you will play a critical role in the assembly, integration, and testing of our spacecraft. Your expertise in aerospace structures, avionics, and harnessing will be essential in ensuring the successful development and deployment of our advanced space systems. Responsibilities: * Perform assembly, integration, and testing (AIT) activities for satellite and spacecraft development projects, following engineering specifications, procedures, and safety protocols. * Conduct structural assembly and integration tasks, including component installation, mechanical fastening, bonding, and precision alignment. * Integrate avionics systems, including electronic components, sensors, and wiring harnesses, ensuring proper connections, routing, and functionality. * Collaborate closely with engineers and other technicians to troubleshoot and resolve technical issues during assembly and integration activities. * Perform system-level functional tests, including electrical continuity, power distribution, communication, and sensor verification. * Utilize precision measurement tools and equipment to ensure adherence to dimensional requirements and alignment tolerances. * Participate in environmental testing, such as thermal vacuum, vibration, and shock testing, to validate satellite and spacecraft performance and durability. * Support the development and maintenance of assembly and integration procedures, work instructions, and quality documentation. * Ensure compliance with quality standards, industry best practices, and safety regulations throughout the assembly and integration process. * Maintain accurate records of assembly activities, test results, and any anomalies or discrepancies encountered. * Contribute to the continuous improvement of assembly and integration processes, recommending and implementing efficiency enhancements and quality improvements. * Stay updated with the latest advancements and best practices in satellite and spacecraft development and testing methodologies. Requirements: * U.S. Person status is required as this position needs to access export-controlled data. * Minimum 5+ years of experience in satellite or spacecraft assembly and integration, specifically in aerospace structures, avionics integration, and harnessing. * Proficiency in precision assembly techniques, including mechanical fastening, bonding, and alignment. * Strong understanding of aerospace electrical systems, avionics, and wiring harnesses. * Experience in conducting system-level functional tests and troubleshooting electrical and mechanical systems. * Familiarity with environmental testing methods, such as thermal vacuum, vibration, and shock testing. * Working knowledge of precision measurement tools and equipment used in satellite and spacecraft assembly and integration. * Familiarity with quality standards and processes related to aerospace manufacturing. * Ability to interpret engineering drawings, specifications, and technical documents. * Excellent attention to detail, with strong problem-solving and analytical skills. * Ability to work effectively in a team environment, collaborating with engineers and technicians. * Strong commitment to safety, always adhering to safety protocols and guidelines. * Excellent communication skills, with the ability to effectively convey technical information to team members and stakeholders. 2nd Shift Hours: 2PM-10:30PM + 10% shift differential Why Join Apex? Apex believes in creating a work environment that you look forward to embracing every day. Our employees love working at Apex, and we want you to love it too. We're a fast-growing startup backed by $200M in Series D funding, and we invest heavily in our people from day one. What We Offer For Full-time Employees: * Shared upside: Receive equity in Apex, letting you benefit from the work you create * Best-in-class healthcare: 100% company-paid medical, dental, and vision for you and your dependents, plus $100k life insurance at no cost * Comprehensive PTO package to reset and recharge - starting at 15 days vacation, growing to 20+ days annually, plus 10 paid holidays * Competitive 401(k) plan with generous matching - 100% match on first 3%, 50% on next 2% * 8 weeks paid parental leave plus childcare reimbursement up to $350/day for work-related travel * Daily catered lunch and unlimited snacks to keep you fueled throughout the day * Vibrant community: Monthly office BBQs, pickleball tournaments, run club, and social gatherings for you and your family * Your dream desk setup and all the tools you need to be your most productive self * World-class Playa Vista office with EV chargers, with the benefit of in-person collaboration with amazing coworkers and flexibility to integrate work and life * Real impact opportunity: Work alongside experts from aerospace, new space, and other cutting-edge industries to make a lasting difference Ready to join a team where your contributions matter and your future is bright? Let's build something extraordinary together. Equal Opportunity Employer Apex Technology, Inc. is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Candidates and employees are always evaluated based on merit, qualifications, and performance. We will never discriminate on the basis of race, color, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status.

At Reflect, you will be expected to move fast, have a lot of ownership and, most importantly, be able to effect change. If this excites you, we are interested in hearing about your best work and accomplishments across any domain and from any points in your life. About the Role As a Spacecraft Integration Technician, you'll be at the heart of assembling and validating our spacecraft from the ground up. From joining mechanical structures and routing harnesses, to running system-level checkouts and environmental tests, you'll bring each subsystem together into one cohesive vehicle. You'll collaborate closely with design, test, and analysis teams, ensuring that every bolt, connector, and software build works in harmony before we send it to orbit. Responsibilities Lead the mechanical and electrical integration of spacecraft subsystems, from bench assembly to final flight build Develop assembly procedures, test plans, and integration workflows for flight hardware Troubleshoot and debug hardware and software anomalies during integration and test Ensure proper configuration control and documentation at every stage of assembly Collaborate with test engineers on vibration, thermal vacuum, and other environmental testing Own the spacecraft through final integration, guiding it from prototype to launch readiness Ideal Qualifications Extensive experience with system-level integration of aerospace hardware (satellites, launch vehicles, etc.) Proficiency in reading and interpreting mechanical drawings, electrical schematics, and wiring diagrams Hands-on skill set in both mechanical assembly and electrical test/validation (oscilloscopes, DMMs, etc.) Ability to navigate fast-paced integration schedules and pivot when encountering unexpected challenges Familiarity with spacecraft environmental testing protocols and requirements Even if you don't meet 100% of the above qualifications, we are likely still interested in hearing from you. Hiring exceptional individuals is our #1 priority, and we believe that exceptional people often have highly unusual backgrounds. We are also interested in carving out unique roles for unconventional people that we are excited about working with. Benefits Reflect Orbital's success will hinge on our team, which is why our compensation and benefits plan is designed to reward our employees and support their families as generously as we're able. Broad choice of medical/dental/vision coverage, Reflect covers 100% of each base-policy Access to HSA, FSA, and 401K Unlimited paid time off, two-weeks per year encouraged Healthy lunches provided daily Equal Opportunity Reflect Orbital is an Equal Opportunity Employer; employment with Reflect Orbital is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. More about Reflect Orbital: Learn more about our team here.

Job Description Furniture Assembly Tech CA Flexible, Part-Time Opportunity to service Your Local Office Supply Store Do you have experience assembling furniture at Office Supply Stores or similar organizations doing handy work? We want you on our team! SPAR is seeking skilled assemblers to perform on-site service and furniture assembly in Office Supply Stores, as well as in-home assembly projects. Are you great with your hands? Do you enjoy assembling furniture and seeing the finished product of your work? If you have experience as an assembler, especially at Office Supply Stores, we want YOU on our team! Why You'll Love This Job: Great Pay: $16.75 - $18/hour for showroom service work Get Paid Fast: With DailyPay, you can work today and get paid tomorrow! Free enrollment required Consistent Work: Part-time, on-going projects servicing Office Supply Stores & customers in-home furniture assembly purchases Work Independently: Enjoy the flexibility of working on your own while still being part of a great team What You'll Be Doing: Assembling Ready-to-Assemble (RTA) Furniture in retail showrooms and customer homes Ensuring displays are set up properly and well-maintained Following plan-o-grams and completing customized category resets Reporting your completed work on the same day via our easy online system What You Bring to the Team: Previous merchandising or commercial furniture assembly experience (Office Supply Stores experience is a plus!) Ability to read instructions and assemble furniture efficiently Can lift up to 50 lbs. and stand for extended periods Reliable transportation (some travel may be required) Your own basic tools (drills, screwdrivers, etc.) Internet access and active email for reporting Be Part of Something Bigger! At SM&A, we provide essential services to top retailers and manufacturers across the U.S. Our work keeps retail moving forward, and we need talented individuals like YOU to help make it happen. Ready to build a career? Apply today! We Are an Equal Opportunity Employer SPAR provides Equal Employment Opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SPAR complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. SPAR expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of SPAR's employees to perform their job duties may result in discipline up to and including discharge.