Assembly technician jobs in Lighthouse Point, FL

Gaumard is looking for talented individuals like you! Assemblers perform tasks that are necessary to the production process. They aid in the fabrication, maintenance, and repair of component parts and products. This role carefully follows assembly instructions and correctly places and attaches parts to create sub-assemblies or finished products. The person filling this position will have familiarity with working in a production environment and will be required to follow detailed instructions. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. SUPERVISION RECEIVED AND EXERCISED: Receives direct supervision from the Team Lead, and indirect supervision from the Department Manager. Does not exercise supervision over any other position. This position is located in Building 2 - Lo Fi Production Department. DUTIES AND RESPONSIBILITIES: Follow detailed instructions to prepare parts for assembly according to procedures and guidelines. Operate equipment necessary to produce materials and products. Perform quality checks on products and parts. Count finished products to determine if product orders are complete. Effectively communicate manufacturing, material, or equipment issues to supervising personnel. Work cooperatively with the assembly team to meet quotas and goals. Assist other technical department personnel as required. Make every effort to increase productivity and efficiency without compromising quality. Perform routine area and equipment cleaning. Perform related duties as assigned Other duties as necessary QUALIFICATIONS/REQUIREMENTS: Education: high school diploma or its equivalent. An individual with an assembly background is preferred. Experience in a production and manufacturing environment preferred. Excellent manual dexterity and fine motor skills. Able to follow detailed written and oral instructions. Must be efficient and careful not to damage items. Good organizational skills with strong attention to detail and the ability to organize items. PHYSICAL/MENTAL REQUIREMENTS: Excellent manual dexterity and fine motor skills. Frequent use of the arms, hands, and fingers is required to perform functions such as reaching, grabbing, pinching, picking, holding, and turning. Frequent use of hand and power tools weighing up to 15lbs. The employee is interchangeably required to sit, stand, and walk during their shift. Employees may be required to bend, stoop or kneel to grab supplies and or materials The employee must be able to lift, carry, push, or pull or move objects across the production floor, weighing up to 40 pounds with or without reasonable accommodation. The employee may be required to reach at or below shoulder level and reach overhead for short to moderate periods. Must be able to hear, understand, and distinguish sounds and speak clearly. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WHAT YOU'LL GET WHEN YOU JOIN THE GAUMARD FAMILY: Competitive Pay Full health benefits (medical, vision, dental) Paid Time Off (PTO) 11 Paid Holidays Retirement plan with 100% employer match up to 5% of employee's contribution Satisfaction knowing that you have joined a long-standing company Hours: Monday to Friday 8:00 AM to 4:30 PM must be willing and able to work some Saturdays or stay beyond scheduled shift if needed to meet business demands. The above supersedes all previous descriptions. This job description is intended to be a tool to describe the primary purpose of the job and the KEY duties and responsibilities. This description does not state or imply that the functions listed above are the only tasks to be performed by the employee occupying this position. Management has the right to add to or change the job responsibilities at any time. Equal Employment Opportunity Statement: Gaumard Scientific is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: Gaumard Scientific is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Gaumard Scientific are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Gaumard Scientific will not tolerate discrimination or harassment based on any of these characteristics. Gaumard Scientific encourages applicants of all ages. Gaumard Scientific will provide reasonable accommodation to employees who have protected disabilities consistent with local law.

Job Description AVStar Fuel Systems develops our employees to their highest potential, come join us! Assembly Technician Description The Assembly Technician person works to ensure accuracy and efficiency in the building of servos and/or Sub-Assembly of parts within the servos while communicating with all members of the team as necessary. QUALIFICATIONS/REQUIREMENTS/EDUCATION Education: High School Diploma, or GED equivalent. Work Experience: At least 3 years overall, preferably in the aircraft, automotive or marine industries performing engine system work. A working knowledge and familiarity with engineering drawings, overhaul manuals, and assembly procedures. Strong mechanical intuition and inclination. DUTIES AND RESPONSIBILITIES (include the following, however, other duties may apply.) Grade 1 Technician The Grade 1 Technician is new to the position, learning to overhaul/test servos. All overhaul work is being accomplished under the supervision of a Grade 2 Technician or higher. Learn to evaluate all cores and their associated documents before beginning assembly and test. Confirm the accuracy of information in the documented sleeve in describing the parts in the overhaul bin. Understand any customer supplied information that may describe issues experienced with the fuel system, specific delivery requirements, and any other relevant requirements. Establish that the latest overhaul information for the system in question is readily available and thoroughly understood before Assembly and Test work begins. Ensure that the assembly and test of the fuel system is in compliance with all equipment manufacturer's overhaul manual and Airflow's Quality Manual requirements. Performing all duties in a manner that avoids unnecessary exposure to machinery, cleaning agents etc. Fulfilling this responsibility can only be achieved by: The study and comprehension of the Safety Data Sheets provided. Wearing the safety goggles provided. Wearing the appropriate and designated safety equipment when performing tear-down. Compensation commensurate with experience. Starting Pay: $17.00 - $20.00 per hour Equal Opportunity Employer: Disability/Veteran Job Type: Full-time FAA DRUG FREE WORKPLACE Job Posted by ApplicantPro

Agilis is seeking an Instrumentation & Assembly Technician in our Palm Beach Gardens, Florida location. The successful candidates will utilzie their knowledge, experience and tools to effectively perform the installation, routing and checkout of instrumentation to support program requirements. Calibrating and troubleshooting electrical instruments Ability to produce instrumented aerospace and industrial gas turbine hardware for component and/or engine assembly and testing. Training will be provided Installing, routing and terminating thermocouples, pressure hypo tubes and strain gauges on aerospace of industrial gas turbine hardware. Adhere to the Lab Quality System and other Quality Processes Assist in the development of new instrumentation and assembly techniques to enhance the product, reduce cost and lead-time

Job Description About the Role: The Assembly Technician plays a critical role in the manufacturing process by accurately assembling components and products according to detailed specifications and quality standards. This position ensures that all assembled products meet safety and performance requirements before moving to the next stage of production or shipment. The technician will work closely with engineering and quality assurance teams to identify and resolve assembly issues, contributing to continuous improvement initiatives. Attention to detail and adherence to safety protocols are paramount to maintain a safe and efficient work environment. Ultimately, the Assembly Technician helps deliver high-quality products that meet customer expectations and support the company's reputation for excellence. Minimum Qualifications: High school diploma or equivalent. Basic understanding of mechanical and electronic assembly processes. Ability to read and interpret technical drawings and assembly instructions. Proficiency in using hand and power tools safely and effectively. Strong attention to detail and manual dexterity. Preferred Qualifications: Previous experience in an assembly or manufacturing environment. Familiarity with quality control standards such as ISO or Six Sigma. Ability to use measurement tools such as calipers and micrometers. Responsibilities: Assemble mechanical and electronic components using hand tools, power tools, and assembly fixtures according to work instructions and blueprints. Inspect parts and assemblies for defects or deviations from specifications and report any quality issues to supervisors. Maintain a clean and organized work area to ensure safety and efficiency. Collaborate with team members and supervisors to troubleshoot assembly problems and implement corrective actions. Document assembly processes and complete production reports accurately and timely. Skills: The required skills enable the Assembly Technician to accurately interpret technical documents and perform precise assembly tasks, ensuring product quality and consistency. Manual dexterity and tool proficiency are essential for efficient and safe handling of components and equipment. Attention to detail helps in identifying defects early and maintaining high standards throughout the assembly process. Preferred skills such as knowledge of quality control and measurement tools enhance the technician's ability to contribute to process improvements and maintain compliance with industry standards. Effective communication and teamwork skills support collaboration with colleagues and supervisors to resolve issues and optimize production workflows.

Landing Gear Technologies (LGT) is an FAA-Certified Repair Station specializing in the repair and overhaul of aircraft landing gears and components. We believe our organization can only be as good as the employees that stand behind it. In this constantly growing industry, we are always seeking talented and dedicated individuals to join our team. We are looking for a Landing Gear Assembly Technician to support the final assembly and build-up of aircraft landing gear components and assemblies. This position focuses on the precise reassembly and testing of overhauled or repaired parts, ensuring they meet OEM and FAA standards for quality and airworthiness. Duties and Responsibilities: · Perform final assembly and build-up of landing gear components, subassemblies, and full assemblies per OEM Component Maintenance Manuals (CMMs) and work instructions. · Install seals, O-rings, hardware, bushings, bearings, and fittings using appropriate tools and calibrated equipment. · Torque hardware to specified values and record all critical measurements and readings. · Ensure proper alignment, fitment, and functionality of all parts during assembly. · Perform hydraulic shock strut test, gap checks, and other test as required. · Collaborate with Quality teams to complete in-process and final inspections. · Tag and prepare completed assemblies for shipment or return to customer. · Maintain accurate records of work performed, including parts used, serial numbers, and inspection results. · Follow all safety guidelines and ensure a clean and organized work area. · Support continuous improvement initiatives and process consistency within the assembly area. Qualifications: · High school diploma or equivalent required; technical school or A&P license a plus. · 2+ years of experience in mechanical assembly, preferably in aerospace or MRO. · Proficient with hand tools, torque wrenches, hydraulic presses, and alignment tools. · Ability to interpret and follow CMMs, blueprints, and detailed work instructions. · Strong mechanical aptitude and high attention to detail. · Familiarity with FAA Part 145 repair station procedures is preferred. · Team player with strong communication and time management skills. Requirements Physical Requirements: · Ability to lift up to 50 lbs and stand for prolonged periods. · Good manual dexterity and hand-eye coordination. · Must be able to wear appropriate PPE and work in a shop environment. · Stand for long periods of time. · Must be able to hear, understand, and distinguish sounds and speak clearly. · Job Type: Full-time.

By joining Numotion, you will be a part of the nation's leading provider of Complex Rehabilitation Technology. Numotion is helping thousands of people with individually configured, medically necessary mobility products and services. From manual and powered wheelchairs to disposable medical supplies that serve unique medical and functional needs, we are improving the lives of people with disabilities by enabling them to actively participate in everyday life. Maintaining our standing as the industry leader in CRT comes from having a workforce with a diverse mix of minds, backgrounds and experiences, and we are committed to cultivating an inclusive work environment based on open dialogue, active listening and ongoing definitive actions. JOB PURPOSE: The Warehouse Technician is responsible for maintaining a clean and organized warehouse and all inventory management related activities within the location. This includes but is not limited to: timely receiving of shipments, staging and put-away of inventory within the warehouse, cleaning and maintenance of fleet equipment, physical inventory counts, and accurate processing and reporting of inventory transactions. KEY RESPONSIBILITIES: * Receive all purchase orders and validate against packing slip within 24 * Ensure all items within warehouse are tagged, labeled, and stored * Timely management of return authorizations (request, return, and reporting). * Complete inventory transactions within Operating * Clean and organize warehouse to Numotion * Waste management - break down of boxes, removing pallets, * Sanitize and maintain fleet (rental, demo, loaner) * Provide guidance on proper inventory control procedures within the * Performs other related duties as LEADERSHIP PRINCIPLES BEHAVIORS: * Urgency * Ownership * Results Oriented * Decisive * Collaborative QUALIFICATIONS, SKILLS, AND EXPERIENCE: * High School Diploma/GED or equivalent work experience * Basic computer skills (Word, Excel, Powerpoint, Email, and Internet) COMPETENCIES AND PREFERRED QUALIFICATIONS: * Supply chain/inventory management experience a plus. * Ability to work in a fast-paced environment and manage multiple tasks. * Ability to think quickly, assess a situation and make a sound decision. * Excellent organizational and time management skills with focus on set priorities. At Numotion, we offer competitive compensation packages, including medical, dental and vision insurance, short-term and long-term disability, a 401k, and life insurance. Numotion is an equal opportunity employer. We strive for a workplace that reflects the communities we serve and do not tolerate discrimination against our employees, customers, and partners regardless of ethnicity, disability, gender identity, sexual orientation, religion, age, citizenship, marital or veteran status. Numotion is a drug-free workplace. Candidates are required to pass a drug test before beginning employment.

Job Description Assembles mechanical units, fabricated parts/components and/or electrical/electronic systems to make subassemblies, assemblies or complete units using hand tools, power tools, jigs, fixtures and miscellaneous equipment. Fits, aligns, calibrates and adjusts parts and mechanisms to meet tolerances and product operating requirements; repairing units or products that have failed to meet requirements. This position requires knowledge that is acquired through experience, specialized education or training. The role has clearly defined procedures and tasks as well as defined guidelines to aid in decision making. Technical knowledge required is limited to the tasks performed in own discipline area and is considered basic. The tasks are generally routine and manual. The job is expected to follow detailed and defined rules / instructions and to make simple judgement in straightforward situations. Typically requires selecting between solutions already established. This job typically requires no experience. Hours:8:00am to 5:00pm Additional Job Details: The worker must be open to work first or second shift (2PM-11PM) Note Shift preference on the top of the resume. Electromechanical background required.

Essential Duties and Accountabilities Ensures all components are correct in size, color and order. Enters data into the computer system. Scans ballistic panel barcode and plate. Verifies accuracy of ballistic and information. Assembles the ballistic following the process steps according to work order specifications. Prints packaging slips. Inserts carrier assembly into the plastic bag, paste label and puts carrier in box. Closes the box with tape and inserts the packaging list into the envelope. Performs a visual inspection for accuracy. Weighs the box and enter the information into the system. Prints the shipping label and tracking and pastes onto box. Confirms label matches the information in the system. Places the completed box on pallet. Diligently attends to details and pursues quality in accomplishing tasks. Responsible for working according to the company's safety and quality standards. Maintains a safe and clean work area. Performs other related duties as required and or as assigned.

CDL / Box Truck Drivers wanted for a Home Delivery Independent Contractor opening! SE independent is looking for dedicated Owner-Operator/Independent Contractors to manage their own businesses within a local region/delivery market. Successful candidates will be expected to perform home deliveries and set up of new furniture and accessories for the customer base of a premier national furniture retailer. While having an opportunity to be home every evening, a successful Independent Contractor can potentially generate $100-150k+ in annual gross revenue. Home Daily, Local Routes Day shift hours Outstanding earnings potential $140,000+ annually Deliver furniture to customers and businesses 1099 position, Owner Operator Must have one FULL year of box truck driving experience - OR - CDL A or B Additional perks of Box truck / CDL drivers with SEIDS Weekly settlements Direct deposit Work Description: Physically delivering furniture into customer's home Use a dispatch app, interact with customers, product handling & assembly, communicate as needed with dispatch/company representatives CDL Class A 1+ Years of verifiable commercial driving experience or 80 hours of training Must own Single Axle Day cab tractor Background check Driving test DOT Required drug and physical No recent DUI/DWI- 5 years No more than 6 points on MVR

Full-time Description We are seeking a hands-on and detail-oriented Production Technician to join our team. This role is responsible for assembling, testing, and troubleshooting Watermaker systems and components in a production environment. The ideal candidate has mechanical aptitude, follows precise instructions, and thrives in a fast-paced, quality-driven setting. You will collaborate with internal teams to ensure timely and accurate builds that meet our company's high standards. Production Responsibilities: Assemble complete Watermaker systems and sub-assemblies in accordance with engineering drawings, wiring diagrams, and schematics. Conduct in-process and final quality control inspections, including full system testing prior to shipment. Ensure the production area remains clean, organized, and compliant with safety protocols Accurately package and label systems for domestic and international shipment. Support inventory control by tracking components, reporting shortages, and assisting with material handling. Collaborate with the engineering and service teams to identify and resolve assembly issues Requirements Qualifications: Technical degree or vocational training preferred; High school diploma or equivalent 1-3 years' experience in mechanical, electrical, or marine systems. Strong mechanical aptitude with basic plumbing and electrical knowledge. Ability to read technical diagrams, schematics, and wiring diagrams. Comfortable using hand tools, power tools, and testing instruments. Valid driver's license and ability to travel locally or occasionally overnight Excellent communication and problem-solving skills. Able to lift up to 50 lbs. and work in tight or elevated spaces.

GotWorX Staffing, Inc. Is now hiring for Assembly associates in Davie, Fl. Immediate Openings for Assembler Primary responsibilities: - Will be building, repairing and assembling electrical components. - Unpack and repack components. Requirements: - Must have reliable transportation to and from work. - Must be able to work at a fast pace. - Must be able to work on your feet for prolonged periods of time. - Must be able to follow directions and training procedures If you are a quick learner and desire a good/stable position please come to our office to complete an application.

Job Description Join Barfield and Become a Part of the Adventure! If you are a talented Assembler professional interested in working in the exciting field of aviation, Barfield wants you! Barfield is more than just a prestigious name in the industry : it is subsidiary of Air France Industries KLM Engineering We are looking to hire a dedicated Assembler to join our team. The Assembler will support our GSE Manufacturing job summary Assemble fabricated parts to small subassemblies and complete units. Your day to day will consist of: Assembles fabricated parts to small subassemblies and complete units. Tests and calibrates parts and mechanisms to meet tolerances and product specifications. Perform other duties as assigned. Comply with safety policies; practices; procedures. Works under general supervision; typically reports to a lead person, supervisor, or manager. Your background matches the role: Positive attitude and problem solving skills Understand, read, and write English Basic Math Dexterity Repetitive work You possess a successful track record as: HS diploma or its equivalent Work the bench Familiar with hand tools and soldering tools Communication, organization skills Participate in proactive team efforts to achieve departmental and company goals. You embody our values: CUSTOMER FOCUS We strive to provide the best services to our customers. INTEGRITY We are personally accountable for the highest standards of ethical behavior. TEAMWORK We are committed to a teamwork environment. ADAPTABILITY In an ever-changing world, we are adaptable to the required challenges. We offer a comprehensive total compensation and benefits package. For more information about us, please visit our website at ******************* Barfield is an equal opportunity employer. Equal Employment Opportunity is the Law. This law requires Barfield to post a notice describing the Federal laws prohibiting job discrimination. For information regarding your legal rights and protections, please click on the following link: Know Your Rights As a Federal Contractor, Barfield is required to participate in the E-Verify Program to confirm eligibility to work in the United States. For information please click on the following link: E-Verify. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status.

Kelly Services is looking to hire several Site Logistics Operators/Material Handlers in Knoxville, TN for an industry leading chemical company. For this opportunity, you could be placed as a Chemical Finished Product Operator or a Polymers Packaging/Warehousing/Shipping Operator on a long-term, indefinite assignment. You will be working with chemicals and should be comfortable doing such - either with previous experience or the willingness to learn. Job Description Kelly Services is currently looking for Assemblers for one of our top clients in Miami Lakes, FL. As an Assembler, you will perform moderately complex manufacturing, assembly, machine set-up and operation, and inspection operations according to detailed verbal and written instructions as described by standard operating procedures and manufacturing instructions of a medical device. Our client's dynamic environment is the perfect place to take your career to the next level. You will be working 1st shift mainly. There is a possibility some of these resources will go to second shift in a few months. This opportunity paying $11.50/hour Responsibilities Accurately record and complete relevant documentation records. Maintain tools and equipment in proper working condition. May train other associates on those operations once demonstrated proficiency is acquired. Demonstrate a strong commitment to teamwork. Work varying shifts and overtime if required by business conditions. Handle and dispose of hazardous materials safely. Comply with all government regulations and company policies. Perform manufacturing operations that include set-up, adjustment, and cleaning of machines and tooling for polishing, welding, soldering, mechanical assembly, and packaging Perform inspection of work using microscopes, simple hand tools and gages as well as complicated measuring equipment Complete legibly and accurately documentation such as production travelers, notebooks, and training records Basic maintenance of equipment and tool Job Requirements: High School Graduate or GED Vocational training with machine operations helpful 2-5 years of GMP experience with either medical device or pharmaceutical is beneficial 2-5 years of manufacturing experience with similar processes and machines Able to lift weights up to 25 lbs occasionally Able to work with hazardous materials Familiarity with machining processes. Basic instrumentation and electrical knowledge Skills Needed: Visual skills to operate microscope for inspecting work. Excellent eye hand coordination and dexterity to perform intricate assemble work. Read and comprehend engineering drawings. Able to read, write, and communicate in English. Able to understand basic math concepts and application to specifications. Understand procedures and able to follow instructions. Able to use and read measuring instruments. Must be capable of learning complex electromechanical assemblies Additional Information All your information will be kept confidential according to EEO guidelines.

Requisition No: 860473 Agency: Department of Corrections Working Title: Engineering Technician IV - Statewide Pay Plan: Career Service Position Number: 70066666 Salary: $62,456.94 - $67,316.86 annually Posting Closing Date: 04/01/2026 Total Compensation Estimator Tool FLORIDA DEPARTMENT OF CORRECTIONS We Never Walk Alone Engineering Technician IV - WWTP This open competitive advertisement is for a Career Service position located at various Correctional Institutions in the Maintenance Department statewide. The mission of Facilities Management and Building Construction at the Florida Department of Corrections is to provide a safe, secure, and efficient environment for staff, inmates, and visitors. This is achieved through the effective management, maintenance, and construction of correctional facilities, ensuring they meet all regulatory standards and support the department's overall mission of public safety and rehabilitation. This position is not a telework position and is required to report to the FDC office in the area it serves. JOB DUTIES: This working position is responsible for the Waste/Wastewater Treatment Plant at a Correctional Institution both in operations and maintenance. This position also instructs inmates in the special skills necessary to operate a Water and Wastewater Treatment Plant through an apprentice on-the-job training program designed to develop experience and skills necessary to assume and fulfill the position of Operator of a water or sewer utility. * Operates and maintains Water Treatment and Wastewater Treatment Plants in compliance with DEP permits and regulations. * Conducts preventive maintenance for both plants, orders, and stocks necessary chemicals. * Repairs breakdowns at the operator level and troubleshoots specialized equipment such as compressors, pumps, air blowers, and chlorinators. * Cleans bar screens, grit chambers, settling, and sludge beds, and performs various water quality tests. * Prepares operational reports, maintains logs, and supervises inmates, preparing progress reports for their rehabilitation. BENEFITS: * Paid vacation, sick leave, and holidays. * Comprehensive health insurance and life insurance with accidental death and dismemberment benefits. * Supplemental Dental, Vision, Life, Disability and Hospitalization insurance. * Tuition-Free college courses. * Retirement Plans with the Florida Retirement System: * Pension Plan (Traditional Retirement Pension Plan) * Investment Plan (401(K)-Type Retirement Plan) * Deferred Retirement Option Program (Drop) * Deferred Compensation * Recently Retired? Beginning July 1, 2024, there is no longer a reemployment limitation; beginning with the 7th calendar month from the member's distribution date, there are no restrictions on working for an FRS employer. You will not be required to repay any prior distributions, and you may continue receiving distributions from the Investment Plan or Pension Plan without interruption. REQUIREMENTS: * A Class C Water and/ or Wastewater Treatment Plant Operator License or higher * A Valid Class E Driver's License Support of knowledge, skills, and abilities should be demonstrated on the application, in the education, in the work experience, in the work sample, in the interview and/or during reference checks. ADDITIONAL INFORMATION: BACKGROUND SCREENING REQUIREMENT The Florida Department of Corrections requires all job applicants and volunteers to pass a Level 2 background check as per Chapter 435, Florida Statutes. This check must be completed before they can start working or volunteering. EMPLOYMENT ELIGIBILITY The Florida Department of Corrections (FDC) only hires U.S. citizens and those authorized to work in the U.S. FDC uses E-Verify to confirm an employee's eligibility to work after completing the I-9 form. For online application issues, call the People First Service Center at **************. Applications will be accepted until 11:59 PM EST on the closing date. The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center (***************. Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F.S., Drug-Free Workplace Act. VETERANS' PREFERENCE. Pursuant to Chapter 295, Florida Statutes, candidates eligible for Veterans' Preference will receive preference in employment for Career Service vacancies and are encouraged to apply. Certain service members may be eligible to receive waivers for postsecondary educational requirements. Candidates claiming Veterans' Preference must attach supporting documentation with each submission that includes character of service (for example, DD Form 214 Member Copy #4) along with any other documentation as required by Rule 55A-7, Florida Administrative Code. Veterans' Preference documentation requirements are available by clicking here. All documentation is due by the close of the vacancy announcement. Location:

Job Description Braman Miami is looking for Ceramic Coating Technicians. This is your opportunity to work with a company that has been trusted in the South Florida community for over 50 years. The Ceramic Coating Technician is a hands-on role that requires attention to detail and a passion for delivering high-quality results. Responsibilities: Surface Preparation: Thoroughly clean and decontaminate vehicle surfaces to ensure optimal adhesion of ceramic coatings. Application: Apply ceramic coatings using proper techniques and equipment to achieve even coverage and a smooth finish. Quality Control: Inspect coated surfaces for imperfections, ensuring high-quality results and customer satisfaction. Customer Service: Communicate effectively with customers to understand their needs and provide recommendations for ceramic coating services. Maintenance: Educate customers on proper maintenance procedures to prolong the lifespan of ceramic coatings and preserve the vehicle's appearance. Safety: Adhere to safety protocols and regulations to maintain a safe working environment. Requirements: - Previous experience in ceramic coating is required! - Strong customer service skills with the ability to communicate effectively with customers and team. - Attention to detail and the ability to deliver high-quality results. - Valid driver's license with a clean driving record. - Ability to work in a fast-paced environment and prioritize tasks effectively. - Knowledge of custodial practices and cleaning techniques is a plus. Benefits: Medical, dental and vision plan. 401(k) savings plan. Accident & critical illness insurance. Paid vacation. Employee Lease programs and much more. Shop Type: Dealership Work Remotely No Powered by JazzHR mTutZNz3s0

Job DescriptionAbout Us At The Pharmacy Hub, we collaborate with pharmaceutical brands, manufacturers, health brands, telemedicine providers, and healthcare companies to deliver essential products directly to patients. Our expertise allows us to seamlessly distribute pharmaceuticals, medical devices, and other healthcare products to consumers, ensuring greater accessibility and convenience. Core Values The Pharmacy Hub is dedicated to breaking barriers in healthcare by championing access, intervention and affordability. Customer-first mindset - we develop strong partnerships with telehealth platforms and healthcare companies to enhance access and understand their specific needs Innovation for intervention in care - we develop advanced compounding solutions and products to better support patient health outcomes Continuous improvement - we continuously improve our processes and offerings through intelligent, honest and transparent practices to deliver cost-effective solutions that truly benefit our clients and their patients. You will play a pivotal role in maintaining these values and contributing to the company's mission of redefining healthcare delivery through superior pharmacy services. Job Summary The Mechanical Assembler within our pharmacy maintenance department specializes in assembling, installing, and maintaining the mechanical systems that are critical to our mail-order operations. This role focuses on the precise fabrication and repair of conveyor systems, automated packaging machinery, and other industrial equipment that ensures the accurate and timely processing and shipping of pharmaceutical products. Key Responsibilities Assemble, install, and maintain mechanical components of conveyor systems, packaging machines, labeling equipment, and other automation used in the pharmacy fulfillment process. Read and interpret mechanical schematics, blueprints, and layout plans to perform precise assembly and modifications to existing equipment. Use hand tools (e.g., wrenches, screwdrivers) and power tools (e.g., drills, grinders) to fit, align, and adjust parts, ensuring proper function and minimal vibration. Perform preventative maintenance tasks, including the disassembly and reassembly of machinery for cleaning, lubrication, and part replacement. Collaborate with Maintenance Technicians and Electro-Mechanical teams to troubleshoot and resolve mechanical issues that cause production stoppages. Conduct basic operational tests on assembled or repaired equipment to verify performance before returning it to the production floor. Fabricate simple replacement parts or brackets as needed using available materials and tools. Maintain accurate records of work performed, parts used, and time spent on assembly and maintenance tasks, following Good Documentation Practices (GDP). Adhere strictly to all safety protocols, Standard Operating Procedures (SOPs), and compliance regulations specific to a pharmaceutical maintenance environment. Keep the maintenance workshop and assembly areas clean, organized, and safe, properly storing all tools and components. Qualifications High school diploma or equivalent (GED). A technical certificate or apprenticeship in mechanical assembly, industrial maintenance, or a related field is preferred. 2+ years of experience in a mechanical assembly role, preferably within a manufacturing, distribution, or packaging environment. Basic English with the ability to read and write. Skills & Abilities: Strong understanding of mechanical concepts (gears, bearings, drives, pneumatics) and the ability to work with complex machinery. Proficiency in reading and interpreting mechanical drawings and schematics. Skilled and safe use of a wide array of hand tools, power tools, and precision measuring instruments (calipers, micrometers). Meticulous approach to ensure all assemblies meet exact specifications for a high-reliability operation. Ability to diagnose the root cause of mechanical failures and implement effective assembly or repair solutions. Understanding of the importance of working in a regulated (cGMP) environment and following detailed procedures. Capable of standing, bending, and lifting up to 50 pounds; comfortable working in an industrial setting. What We Offer Competitive salary. Quarterly bonus program based on productivity and efficiency. Flexible scheduling options (including evenings/weekends as needed). Opportunities for growth in a rapidly expanding telepharmacy practice. Collaborative and innovative work environment focused on patient safety and compliance. Location: Fort Lauderdale, FL Shifts: DBT This is a 100% onsite role; remote or hybrid work is not available Pay Range$17-$26 USD Benefits: 401(k) with up to 4% matching Medical, dental, vision and life insurance Paid time off Paid public holidays At The Pharmacy Hub, we don't just offer jobs-we offer opportunities for career growth and development. We take pride in our fast-paced, team-driven culture and are committed to supporting our employees in achieving success. If you're ready to join a company that values hard work, dedication, and teamwork, apply today! We look forward to welcoming you to The Pharmacy Hub and working together to deliver top-tier pharmacy fulfillment solutions.

Gaumard is looking for talented individuals like you!

GotWorX, Inc. Is currently seeking a Assembly Associate for our client based in the Fort Lauderdale area. Temp-Hire job opportunity for the right candidate. Client is currently offering a salary of $13.50, plus a benefits package one perm employee! Responsibilities: Prepares work to be accomplished by studying assembly instructions, blueprint specifications, and parts lists; gathering parts, subassemblies, tools, and materials. Positions parts and subassemblies by using templates or reading measurements. Assembles components by examining connections for correct fit; fastening parts and subassemblies. Verifies specifications by measuring completed component.

Requisition No: 860473 Agency: Department of Corrections Working Title: Engineering Technician IV - Statewide Pay Plan: Career Service Position Number: 70066666 Salary: $62,456.94 - $67,316.86 annually Posting Closing Date: 04/01/2026 Total Compensation Estimator Tool FLORIDA DEPARTMENT OF CORRECTIONS We Never Walk Alone Engineering Technician IV - WWTP This open competitive advertisement is for a Career Service position located at various Correctional Institutions in the Maintenance Department statewide. The mission of Facilities Management and Building Construction at the Florida Department of Corrections is to provide a safe, secure, and efficient environment for staff, inmates, and visitors. This is achieved through the effective management, maintenance, and construction of correctional facilities, ensuring they meet all regulatory standards and support the department's overall mission of public safety and rehabilitation. This position is not a telework position and is required to report to the FDC office in the area it serves. JOB DUTIES: This working position is responsible for the Waste/Wastewater Treatment Plant at a Correctional Institution both in operations and maintenance. This position also instructs inmates in the special skills necessary to operate a Water and Wastewater Treatment Plant through an apprentice on-the-job training program designed to develop experience and skills necessary to assume and fulfill the position of Operator of a water or sewer utility. * Operates and maintains Water Treatment and Wastewater Treatment Plants in compliance with DEP permits and regulations. * Conducts preventive maintenance for both plants, orders, and stocks necessary chemicals. * Repairs breakdowns at the operator level and troubleshoots specialized equipment such as compressors, pumps, air blowers, and chlorinators. * Cleans bar screens, grit chambers, settling, and sludge beds, and performs various water quality tests. * Prepares operational reports, maintains logs, and supervises inmates, preparing progress reports for their rehabilitation. BENEFITS: * Paid vacation, sick leave, and holidays. * Comprehensive health insurance and life insurance with accidental death and dismemberment benefits. * Supplemental Dental, Vision, Life, Disability and Hospitalization insurance. * Tuition-Free college courses. * Retirement Plans with the Florida Retirement System: * Pension Plan (Traditional Retirement Pension Plan) * Investment Plan (401(K)-Type Retirement Plan) * Deferred Retirement Option Program (Drop) * Deferred Compensation * Recently Retired? Beginning July 1, 2024, there is no longer a reemployment limitation; beginning with the 7th calendar month from the member's distribution date, there are no restrictions on working for an FRS employer. You will not be required to repay any prior distributions, and you may continue receiving distributions from the Investment Plan or Pension Plan without interruption. REQUIREMENTS: * A Class C Water and/ or Wastewater Treatment Plant Operator License or higher * A Valid Class E Driver's License Support of knowledge, skills, and abilities should be demonstrated on the application, in the education, in the work experience, in the work sample, in the interview and/or during reference checks. ADDITIONAL INFORMATION: BACKGROUND SCREENING REQUIREMENT The Florida Department of Corrections requires all job applicants and volunteers to pass a Level 2 background check as per Chapter 435, Florida Statutes. This check must be completed before they can start working or volunteering. EMPLOYMENT ELIGIBILITY The Florida Department of Corrections (FDC) only hires U.S. citizens and those authorized to work in the U.S. FDC uses E-Verify to confirm an employee's eligibility to work after completing the I-9 form. For online application issues, call the People First Service Center at **************. Applications will be accepted until 11:59 PM EST on the closing date. The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center (***************. Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F.S., Drug-Free Workplace Act. VETERANS' PREFERENCE. Pursuant to Chapter 295, Florida Statutes, candidates eligible for Veterans' Preference will receive preference in employment for Career Service vacancies and are encouraged to apply. Certain service members may be eligible to receive waivers for postsecondary educational requirements. Candidates claiming Veterans' Preference must attach supporting documentation with each submission that includes character of service (for example, DD Form 214 Member Copy #4) along with any other documentation as required by Rule 55A-7, Florida Administrative Code. Veterans' Preference documentation requirements are available by clicking here. All documentation is due by the close of the vacancy announcement. Location: