Quality Control Inspector jobs at Baker Hughes

Scientific Drilling is looking for a Quality Inspector to work at our Applied Technologies Center in Paso Robles, CA. Scientific Drilling is an independent directional drilling and wellbore navigation, surveying and logging Service Company serving customers worldwide. Our industry leading navigation systems provide definitive wellbore placement information, enabling safer and more efficient placement of tightly spaced wellbores throughout the world. We are motivated by crafting innovative and elegant solutions to technically challenging problems. Nestled between San Francisco and Los Angeles, the California Central Coast is the location described as the happiest place on earth. Home to where others vacation, including 200+ wineries, fresh air, miles of beautiful beaches, and small-town appeal. Our Quality Inspector position will be working in our Manufacturing department. The Quality Inspector is expected to perform the essential duties listed below. Candidates must have authorization to work in the United States. Responsibilities: Perform detailed inspections of electronic assemblies and components, identifying defects such as broken leads, solder irregularities, coating imperfections, and physical damage. Conduct First Article Inspections (FAI) and provide feedback on engineering draft components. Verify hardware components against assembly and parts lists. Document inspection results accurately and approve or reject items based on compliance with specifications. Ensure proper operation and calibration of measurement and testing equipment. Adhere to and promote company safety and quality standards. Maintain a clean and organized workspace. Collaborate with engineering, production, and quality teams to support continuous improvement initiatives. Required Qualifications & Skills Experience : 3-5+ years in quality inspection within an electronics manufacturing environment (preferred). Technical Knowledge: Strong understanding of quality control principles, assembly drawings, wire lists, and measurement instruments. Certifications: IPC-J-STD-001 training and experience with ISO-9001:2015 standards (preferred). Technical Proficiency: Familiarity with MS Office Suite (Word, Excel, Visio, Outlook, PowerPoint). Attention to Detail: Highly organized with the ability to multitask and ensure accuracy in documentation and inspections. Strong Communication Skills: Ability to collaborate effectively with teams and clearly document inspection results. Location, Physical Requirements and PPE Manufacturing: Ability to walk, stand, sit, kneel, push, stoop, reach above the shoulder, grasp, pull, bend repeatedly, identify colors, hear with aid, see, write, count, read, speak, analyze, alphabetize, lift and carry 25 lbs. and under, perceive depth, and operate motor equipment. Conditions include working inside. Working around moving objects, machines with moving parts. Working around radiant and electrical energy. Work with heated soldering iron and flux. Working closely with others, working alone, working extended or irregular hours. Working environment may include but not limited to, intermittent noise, fumes, smoke, grease, dust, oils and solvents. Equipment (machines, tools, devices) used in performing the essential job function include but not limited to computer and related equipment, calculator, special instrumentation, hand tools, power tools, air tools, microscope and telephone. Ability to wear proper personal protective equipment (PPE), including but not limited to, safety glasses, reinforced toed shoes, gloves, and ear plugs or muffs. Limitation and Disclaimer This describes the general duties and responsibilities, and physical requirements associated with the position; it is not an exhaustive list of all duties, responsibilities, or skills required for the position. The general duties and responsibilities and physical requirements associated with the position are subject to modification in order to reasonably accommodate individuals with disabilities. Some physical requirements may exclude individuals who pose a threat or risk to the health or safety to themselves or others. This job description neither states nor implies that the listed general duties and responsibilities and physical requirements associated with the position are the only tasks expected of an employee. An employee is also required to follow any other job-related instructions and perform any other job-related tasks requested by their supervisor and not in violation of any applicable laws, regulations, or rules. Requirements are representative of minimum levels of knowledge, skills, and abilities. To perform this job successfully, an employee must possess the abilities and aptitudes to perform each duty, responsibility, and physical requirement proficiently. Employment at Scientific Drilling International is on an "at-will" basis.

Scientific Drilling is looking for a Quality Inspector to work at our Applied Technologies Center in Paso Robles, CA. Scientific Drilling is an independent directional drilling and wellbore navigation, surveying and logging Service Company serving customers worldwide. Our industry leading navigation systems provide definitive wellbore placement information, enabling safer and more efficient placement of tightly spaced wellbores throughout the world. We are motivated by crafting innovative and elegant solutions to technically challenging problems. Nestled between San Francisco and Los Angeles, the California Central Coast is the location described as the happiest place on earth. Home to where others vacation, including 200+ wineries, fresh air, miles of beautiful beaches, and small-town appeal. Our Quality Inspector position will be working in our Manufacturing department. The Quality Inspector is expected to perform the essential duties listed below. Candidates must have authorization to work in the United States. Responsibilities: Perform detailed inspections of electronic assemblies and components, identifying defects such as broken leads, solder irregularities, coating imperfections, and physical damage. Conduct First Article Inspections (FAI) and provide feedback on engineering draft components. Verify hardware components against assembly and parts lists. Document inspection results accurately and approve or reject items based on compliance with specifications. Ensure proper operation and calibration of measurement and testing equipment. Adhere to and promote company safety and quality standards. Maintain a clean and organized workspace. Collaborate with engineering, production, and quality teams to support continuous improvement initiatives. Required Qualifications & Skills Experience : 3-5+ years in quality inspection within an electronics manufacturing environment (preferred). Technical Knowledge: Strong understanding of quality control principles, assembly drawings, wire lists, and measurement instruments. Certifications: IPC-J-STD-001 training and experience with ISO-9001:2015 standards (preferred). Technical Proficiency: Familiarity with MS Office Suite (Word, Excel, Visio, Outlook, PowerPoint). Attention to Detail: Highly organized with the ability to multitask and ensure accuracy in documentation and inspections. Strong Communication Skills: Ability to collaborate effectively with teams and clearly document inspection results. Location, Physical Requirements and PPE Manufacturing: Ability to walk, stand, sit, kneel, push, stoop, reach above the shoulder, grasp, pull, bend repeatedly, identify colors, hear with aid, see, write, count, read, speak, analyze, alphabetize, lift and carry 25 lbs. and under, perceive depth, and operate motor equipment. Conditions include working inside. Working around moving objects, machines with moving parts. Working around radiant and electrical energy. Work with heated soldering iron and flux. Working closely with others, working alone, working extended or irregular hours. Working environment may include but not limited to, intermittent noise, fumes, smoke, grease, dust, oils and solvents. Equipment (machines, tools, devices) used in performing the essential job function include but not limited to computer and related equipment, calculator, special instrumentation, hand tools, power tools, air tools, microscope and telephone. Ability to wear proper personal protective equipment (PPE), including but not limited to, safety glasses, reinforced toed shoes, gloves, and ear plugs or muffs. Limitation and Disclaimer This describes the general duties and responsibilities, and physical requirements associated with the position; it is not an exhaustive list of all duties, responsibilities, or skills required for the position. The general duties and responsibilities and physical requirements associated with the position are subject to modification in order to reasonably accommodate individuals with disabilities. Some physical requirements may exclude individuals who pose a threat or risk to the health or safety to themselves or others. This job description neither states nor implies that the listed general duties and responsibilities and physical requirements associated with the position are the only tasks expected of an employee. An employee is also required to follow any other job-related instructions and perform any other job-related tasks requested by their supervisor and not in violation of any applicable laws, regulations, or rules. Requirements are representative of minimum levels of knowledge, skills, and abilities. To perform this job successfully, an employee must possess the abilities and aptitudes to perform each duty, responsibility, and physical requirement proficiently. Employment at Scientific Drilling International is on an "at-will" basis.

This position is a certified Level II Quality Control inspector in all disciplines/methods. The individual should have the necessary training and experience to obtain level II certifications within six months of employment. The position is in the Engineering Support Department and will report to the Plant Support Manager at Plant Hatch near Baxley, Georgia. Job Summary / Responsibilities Maintain all areas of knowledge and experience associated with procedures, instructions, and work orders associated with inspections and examinations as required by the Level II. Initiate/Implement schedules, perform inspection planning and perform completion reviews associated with inspections, examinations, and material receipt. Perform inspections, examinations and material receipt of work activities associated with plant maintenance, modifications, or construction projects in accordance with approved procedures and instructions, codes and standards. Perform testing or verification of materials associated with permanent plant equipment. Assist in the development and implementation of various inspection and examination programs and procedures. Responsible for assisting the certifying authority level III in the training and certification of lower-level personnel. Evaluate indeterminate or unacceptable inspection or examination results for defect characterization and possible corrective measures. Provide technical direction and oversight for other personnel during normal and outage work activities. The candidate is expected to take a leadership role in training less experienced personnel and coordinating inspection contractor personnel during outages. Education/Certification Requirements Must have held a Level II or III certification per NQA-1 and /or ASNT CP-189 within the last eight years. Associate or higher degree in relevant field preferred. Technical training in the area of inspection resulting in ANSI Level II or III certification in the following fields is preferred: Electrical, Mechanical, I&C, Civil, Coatings. Technical training in the area of nondestructive testing resulting in Level II or Level III certification in the following fields is preferred: Visual Section XI, Visual Welding, Magnetic Particle, Liquid Penetrant inspection. Background/Experience Requirements Must meet the experience requirements as stipulated by NQA-1, ASNT CP-189 and/or ASME Section XI. Experience credit is allowed for personnel with related degrees in a method of discipline. Other areas of qualification such as successful completion of discipline or method specific training may be considered equivalent to the initial training requirements as approved by the certifying authority level III. Must possess the skills and knowledge to interpret codes, standards, and specifications. Must be able to verify the adequacy of processes and procedures to those same codes, standards and specifications. Must have a general knowledge of QC and NDE inspection and examination techniques. Must be able to successfully pass and maintain site qualifications necessary to support the performance of inspections and examinations. The position requires basic computer skills and the ability to comprehend new software programs associated with inspection and examination activities. Must be able to work in hot and cold environments. Must be able to climb ladders and scaffolding to perform duties of this job. Industrial site experience is preferred. Nuclear power plant experience is preferred. Demonstrated leadership is desired. Must be willing and able to perform on-call duties. Behavioral Attributes Places highest priority on nuclear and industrial safety. Works through conflicts to achieve best possible solution. Works well in team setting. Respects the dignity and different views of every individual. Assumes personal responsibility for individual and team success. Must be able to hold self and others accountable for safe work behaviors. Optimizes the use of resources. Leadership courage to identify and document items adverse to quality.

This position is a certified Level II Quality Control inspector in all disciplines/methods. The individual should have the necessary training and experience to obtain level II certifications within six months of employment. The position is in the Engineering Support Department and will report to the Plant Support Manager at Plant Hatch near Baxley, Georgia. Job Summary / Responsibilities Maintain all areas of knowledge and experience associated with procedures, instructions, and work orders associated with inspections and examinations as required by the Level II. Initiate/Implement schedules, perform inspection planning and perform completion reviews associated with inspections, examinations, and material receipt. Perform inspections, examinations and material receipt of work activities associated with plant maintenance, modifications, or construction projects in accordance with approved procedures and instructions, codes and standards. Perform testing or verification of materials associated with permanent plant equipment. Assist in the development and implementation of various inspection and examination programs and procedures. Responsible for assisting the certifying authority level III in the training and certification of lower-level personnel. Evaluate indeterminate or unacceptable inspection or examination results for defect characterization and possible corrective measures. Provide technical direction and oversight for other personnel during normal and outage work activities. The candidate is expected to take a leadership role in training less experienced personnel and coordinating inspection contractor personnel during outages. Education/Certification Requirements Must have held a Level II or III certification per NQA-1 and /or ASNT CP-189 within the last eight years. Associate or higher degree in relevant field preferred. Technical training in the area of inspection resulting in ANSI Level II or III certification in the following fields is preferred: Electrical, Mechanical, I&C, Civil, Coatings. Technical training in the area of nondestructive testing resulting in Level II or Level III certification in the following fields is preferred: Visual Section XI, Visual Welding, Magnetic Particle, Liquid Penetrant inspection. Background/Experience Requirements Past or current experience in performing inspections and be able to be certified to ANSI N45.2.6 as a Level II inspector. Must be able to pass practical and written test. Be able to obtain and pass the practical and written test for ANSI mechanical, electrical, civil inspections. Knowledge of 10CFR50 Appendix-B, NQA-1 Quality Programs, Code of construction for nuclear power plants, ANSI and ASME codes. Must have at least 2 years of documented experience in welding, visual inspections, MT and PT to AMSE BPVC XI experience. Familiar in the use of common computer software such as Word, Excel in generating documents. Knowledge and application of the fundamental concepts, practices and procedures of particular field of specialization Familiar with standard concepts, practices, and procedures within the quality field. Intermediate computer skills including job specific programs, spreadsheets, word processing Ability to read and understand procedures, specifications and drawings and to evaluate documentation for compliance with design specifications Review QA procedures to verify compliance with ASME, IEEE, and NRC regulations Mechanical aptitude and Electrical background required Must be able to work in hot and cold environments. Must be able to climb ladders and scaffolding to perform duties of this job. Industrial site experience is preferred. Nuclear power plant experience is preferred. Demonstrated leadership is desired. Must be willing and able to perform on-call duties. Behavioral Attributes Places highest priority on nuclear and industrial safety. Works through conflicts to achieve best possible solution. Works well in team setting. Respects the dignity and different views of every individual. Assumes personal responsibility for individual and team success. Must be able to hold self and others accountable for safe work behaviors. Optimizes the use of resources. Leadership courage to identify and document items adverse to quality.

This position is a certified Level II Quality Control inspector in all disciplines/methods. The individual should have the necessary training and experience to obtain level II certifications within six months of employment. The position is in the Engineering Support Department and will report to the Plant Support Manager at Plant Hatch near Baxley, Georgia. Job Summary / Responsibilities + Maintain all areas of knowledge and experience associated with procedures, instructions, and work orders associated with inspections and examinations as required by the Level II. + Initiate/Implement schedules, perform inspection planning and perform completion reviews associated with inspections, examinations, and material receipt. + Perform inspections, examinations and material receipt of work activities associated with plant maintenance, modifications, or construction projects in accordance with approved procedures and instructions, codes and standards. + Perform testing or verification of materials associated with permanent plant equipment. + Assist in the development and implementation of various inspection and examination programs and procedures. + Responsible for assisting the certifying authority level III in the training and certification of lower-level personnel. + Evaluate indeterminate or unacceptable inspection or examination results for defect characterization and possible corrective measures. + Provide technical direction and oversight for other personnel during normal and outage work activities. + The candidate is expected to take a leadership role in training less experienced personnel and coordinating inspection contractor personnel during outages. Education/Certification Requirements + Must have held a Level II or III certification per NQA-1 and /or ASNT CP-189 within the last eight years. + Associate or higher degree in relevant field preferred. + Technical training in the area of inspection resulting in ANSI Level II or III certification in the following fields is preferred: Electrical, Mechanical, I&C, Civil, Coatings. + Technical training in the area of nondestructive testing resulting in Level II or Level III certification in the following fields is preferred: Visual Section XI, Visual Welding, Magnetic Particle, Liquid Penetrant inspection. Background/Experience Requirements + Past or current experience in performing inspections and be able to be certified to ANSI N45.2.6 as a Level II inspector. Must be able to pass practical and written test. + Be able to obtain and pass the practical and written test for ANSI mechanical, electrical, civil inspections. + Knowledge of 10CFR50 Appendix-B, NQA-1 Quality Programs, Code of construction for nuclear power plants, ANSI and ASME codes. + Must have at least 2 years of documented experience in welding, visual inspections, MT and PT to AMSE BPVC XI experience. + Familiar in the use of common computer software such as Word, Excel in generating documents. + Knowledge and application of the fundamental concepts, practices and procedures of particular field of specialization + Familiar with standard concepts, practices, and procedures within the quality field. + Intermediate computer skills including job specific programs, spreadsheets, word processing + Ability to read and understand procedures, specifications and drawings and to evaluate documentation for compliance with design specifications + Review QA procedures to verify compliance with ASME, IEEE, and NRC regulations + Mechanical aptitude and Electrical background required + Must be able to work in hot and cold environments. Must be able to climb ladders and scaffolding to perform duties of this job. + Industrial site experience is preferred. + Nuclear power plant experience is preferred. + Demonstrated leadership is desired. + Must be willing and able to perform on-call duties. Behavioral Attributes + Places highest priority on nuclear and industrial safety. + Works through conflicts to achieve best possible solution. + Works well in team setting. + Respects the dignity and different views of every individual. + Assumes personal responsibility for individual and team success. + Must be able to hold self and others accountable for safe work behaviors. + Optimizes the use of resources. + Leadership courage to identify and document items adverse to quality. Southern Nuclear , a subsidiary of Southern Company (NYSE: SO), is a leader among the nation's nuclear energy facility operators and an innovator in advanced nuclear technologies. Southern Nuclear is an essential part of Southern Company's energy portfolio, operating over 8,200 MW across eight nuclear energy units in Alabama and Georgia at the Joseph M. Farley Nuclear Plant near Dothan, Ala., the Edwin I. Hatch Nuclear Plant near Baxley, Ga., and the Alvin W. Vogtle Electric Generating Plant near Waynesboro, Ga. The company recently achieved commercial operation on Vogtle Units 3&4, representing an historic achievement for the nuclear industry and the country. Vogtle Units 3&4 are the first new nuclear units to reach commercial operation and be built in the United States in the last three decades. Southern Nuclear is a recognized leader in the industry in nuclear and fuel innovation, having been the first to deploy Accident Tolerant Fuels and winning over 10 consecutive Top Innovative Practice (TIP) Awards and eight EPRI awards. For more than 40 years, Southern Nuclear has operated nuclear energy facilities at the highest levels of safety and reliability, generating carbon-free electricity for millions of homes and businesses. The company's headquarters is in Birmingham, Ala. Twitter: @SouthernNuclear; Facebook: facebook.com/southernnuclear; *********************** Southern Company (NYSE: SO ) is a leading energy provider serving 9 million customers across the Southeast and beyond through its family of companies. Providing clean, safe, reliable and affordable energy with excellent service is our mission. The company has electric operating companies in three states, natural gas distribution companies in four states, a competitive generation company, a leading distributed energy solutions provider with national capabilities, a fiber optics network and telecommunications services. Through an industry-leading commitment to innovation, resilience and sustainability, we are taking action to meet customers' and communities' needs while advancing our goal of net-zero greenhouse gas emissions by 2050. Our uncompromising values ensure we put the needs of those we serve at the center of everything we do and are the key to our sustained success. We are transforming energy into economic, environmental and social progress for tomorrow. Our corporate culture has been recognized by a variety of organizations, earning the company awards and recognitions that reflect Our Values and dedication to service. To learn more, visit *********************** . Southern Company invests in the well-being of its employees and their families through a comprehensive total rewards strategy that includes competitive base salary, annual incentive awards for eligible employees and health, welfare and retirement benefits designed to support physical, financial, and emotional/social well-being. This position may also be eligible for additional compensation, such as an incentive program, with the amount of any bonus/awards subject to the terms and conditions of the applicable incentive plan(s). A summary of the benefits offered for this position can be found here **************************************************** . Additional and specific details about total compensation and benefits will also be provided during the hiring process. Southern Company is an equal opportunity employer where an applicant's qualifications are considered without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other basis prohibited by law. Job Identification: 15704 Job Category: Power Plant Operations & Maintenance Job Schedule: Full time Company: Southern Nuclear

Helpmates is looking for an QC Inspector to ensure that all product inspections are performed and meet customer requirements and company standards. Pay Rate: $23 - $28 per hour. Depending on experience Schedule: 3:30 pm - 12:00 pm Must have experience in AS9100 aerospace 3 - 5 years of experience as a Final Inspector and/or Receiving Inspector in a Manufacturing or Aerospace environment Job Duties: Follow quality processes and procedures to perform detailed inspection in receiving, in-process Final inspection to ensure products conform to customer requirements, rejecting and returning unacceptable materials Complete required documentation Perform AS9102 first article inspection and other extensive inspections per specifications Develop and review inspection plans Ensure quality standards are met for all components and assemblies for final acceptance Maintain parts history folders, inspection reports and prints/drawings Calibrate and document hand tools and other inspection equipment Perform hardness and electrical conductivity testing Carries out day-to-day work following the departments continuous improvement plan Promote safety by working in a safe manner at all times May perform other inspections or tests such as Proof test, Pressure test, CMM etc. Establish and maintain good standards of communication and relations with other departments, such as Engineering, Purchasing, Production, Receiving, etc. Perform other duties as assigned by Management such as identification of products Requirements: 3-5 years of experience as a Final Inspector and/or Receiving Inspector in a Manufacturing or Aerospace environment - MUST HAVE Effectively work with mechanical and electronic inspection tools and devices Working knowledge of Geometric and Dimensional Tolerances (GD&T) Working knowledge of mylars, optical comparator, thickness gage and profilometer Knowledge of aerospace specifications, quality codes and standard Knowledge of Six Sigma preferred Able to read blueprints and schematics Must be accurate and detailed with minimum errors Able to work within specific time schedules/deadlines Basic computer skills Work within a team environment Respond with sensitivity to people of diverse perspectives Dependability, excellent attendance, ability to work overtime and other shifts Minimum Education: High school graduate or GED required Associate degree or equivalent training in a related field preferred Certifications/Licenses: Certification in Mechanical Inspection Certification in CMM Inspection Certification in Hardness and EC testing preferred #HSCE

Quality Control CMM Inspector (Night Shift) Shift: Night Shift (Monday - Thursday 4:30PM-3:00AM 10 hr. shift) As a Quality Inspector, you will play a crucial role in ensuring that our products meet or exceed customer specifications and quality standards. You will be responsible for inspecting machined parts, identifying defects, and verifying compliance with engineering drawings and the necessary part numbers and traceability numbers. Job Responsibilities: Perform in-process and final inspections on valve components, machined parts and detailed final assemblies. Perform receiving inspection on incoming product. Proficient in visual and dimensional inspections using all inspection tools for granite plate inspection. Interpret drawings, certifications, and industry specifications. The ability to apply GD&T. Trains and mentors less experienced inspectors. Create inspection reports and maintain accurate records of inspections and findings. Collaborate with production teams to address quality issues and provide feedback for process improvement. Performs other duties as assigned. Follow company instruction in record management including calibration, inspection, and test report. Able to lift to 50 pounds occasionally and be able to use forklift equipment Job requires walking through the campus 80% of time during shift, may be exposed to elements. May perform any other work-related functions as deemed necessary and appropriate by immediate supervisor or manager, as directed. . Skills & Abilities: Ability to interpret mechanical drawings of components and assemblies Knowledge of Geometric Dimensioning and Tolerancing (GDT) required Ability to read and interpret standards and specifications such as ASME, ANSI, NACE, etc. Proficient in MS Office Suite specifically MS Excel, and experience with ERP/MRP systems. Ability to work in a team-oriented environment that is fast paced and demanding. Must be self-directed, have excellent initiative and organizational skills. Exhibits a strong ability to handle multiple demands with a sense of urgency, drive, and energy. Works well meeting multiple deadlines with the ability to deliver on time. Excellent written and verbal communications skills. Core Qualifications: High School diploma or equivalent required. Minimum of five years QC inspection experience of raw material, machined parts, coating, and review of inspection and testing documentations. Minimum of 3 years of experience working in a machining and assembly environment Candidate must have Portable CMM (Faro, Romer) and/or Stationary CMM experience preferred Experience with nonconforming material control and ability to follow company specific instructions and directions. Experience with equipment calibration program. Experience with the review and approval of Certified Material Test Reports with respect to internal and national material specifications/standards. Experience with evaluation for acceptance of inspection and testing reports including Certificate of Conformance, Coating, Welding, Hardness Test, Heat Treat, Liquid Penetrant, Magnetic Particle Testing, Ultrasonic Testing, and Radiographic Testing.

: For over 75 years, Puffer-Sweiven has set the standard in equipment and services for process control, automation, safety, and reliability. We help process-intensive facilities run more efficiently and safely by delivering quality products, technical support, and knowledgeable staff to implement the needed process solutions - with the goal of exceeding customer expectations. Our dedication brings the most advanced products and services to our customers throughout the Central and Gulf Coast regions of Texas. Specialties: As an Emerson Impact Partner, we offer a broad base of superior solutions including the top product lines for a given application. Our specialties at Puffer-Sweiven include: Process Control & Safety Systems Control Valves & Regulators Isolation Valves & Actuation Oil & Gas Automation Reliability Solutions & Services Pressure Management Specialty Pumps & Rotating Equipment Instrumentation Maintenance & Repair Services Duties and Responsibilities: Inspection & Testing Perform incoming inspections of pressure relief valves to assess condition and identify defects. Verify dimensional accuracy, material specifications, and component integrity before and after repair. Oversee hydrostatic, pneumatic, and functional testing to confirm valve performance. Ensure that all repaired Valves meet all necessary specifications, both physical asset and documentation prior to shipment of the valve to customer; i.e. Final Inspection Repair Oversight Monitor repair activities to ensure adherence to approved procedures and OEM specifications. Validate calibration of tools, gauges, and test benches used in valve repair. Ensure replacement parts meet quality and certification requirements. May communicate with customers directly to discuss specific issues found. Maintain the work area and equipment in a clean and orderly condition. Required to work independent of supervision for after-hours call-outs. Compliance & Documentation Maintain detailed inspection records, test reports, and repair certifications. Ensure compliance with ASME, API, ISO, and other applicable standards. Support audits by regulatory bodies and internal quality teams. Continuous Improvement Identify recurring defects and recommend corrective/preventive actions. Collaborate with technicians and engineers to improve repair processes. Provide training and guidance on quality standards and inspection techniques. Inspects valve and/or actuation assets against inspection forms. Ensures compliance to repair procedures and standards. Initiate non-conformances for assets that fail inspections against inspection forms. Monitor status of open non-conformances and work with Supervisors and Managers to ensure timely action. Escalate Quality Issues to relevant leadership as necessary. Suggest quality and process improvements to leadership. Drive implementation of processes as required. Monitor and report out established KPI's relevant at final inspection, like First Pass Yield % (FPY). QUALIFICATIONS: Education / Experience / Skills Technical diploma or degree in Mechanical Engineering or related field. Minimum 3-5 years of experience in valve inspection, repair, or industrial equipment quality assurance. Strong knowledge of pressure relief valve standards (ASME Section VIII, API 576, NBIC). Proficiency in using precision measuring instruments (micrometers, calipers, gauges). Ability to work non standard hours/after hours. Familiarity with non-destructive testing (NDT) methods is a plus. Strong organizational skills with exceptional attention to detail are required. COMPETENCIES: Ability to safely use and maintain a large variety of tools and equipment, associated with the assembly of relief valves, including impact wrenches, electric and manual hand tools, lapping machines, and overhead cranes and forklifts. Ability to read customer specification sheets and basic dimensional drawings. Ability to read and interpret assembly manuals (i.e. Manufacturers' Spring charts), engineering drawings and technical specifications. Good computer skills. Ability to work independently or as a team member. Ability to work with minimum supervision. Attention to detail and strong analytical skills. Excellent documentation and reporting skills. Strong communication and teamwork abilities. Commitment to safety and regulatory compliance.

Job Description : For over 75 years, Puffer-Sweiven has set the standard in equipment and services for process control, automation, safety, and reliability. We help process-intensive facilities run more efficiently and safely by delivering quality products, technical support, and knowledgeable staff to implement the needed process solutions - with the goal of exceeding customer expectations. Our dedication brings the most advanced products and services to our customers throughout the Central and Gulf Coast regions of Texas. Specialties: As an Emerson Impact Partner, we offer a broad base of superior solutions including the top product lines for a given application. Our specialties at Puffer-Sweiven include: Process Control & Safety Systems Control Valves & Regulators Isolation Valves & Actuation Oil & Gas Automation Reliability Solutions & Services Pressure Management Specialty Pumps & Rotating Equipment Instrumentation Maintenance & Repair Services Duties and Responsibilities: Inspection & Testing Perform incoming inspections of pressure relief valves to assess condition and identify defects. Verify dimensional accuracy, material specifications, and component integrity after and after repair. Oversee hydrostatic, pneumatic, and functional testing to confirm valve performance. Ensure that all repaired Valves meet all necessary specifications, both physical asset and documentation prior to shipment of the valve to customer; i.e. Final Inspection Repair Oversight Monitor repair activities to ensure adherence to approved procedures and OEM specifications. Validate calibration of tools, gauges, and test benches used in valve repair. Ensure replacement parts meet quality and certification requirements. May communicate with customers directly to discuss specific issues found. Maintain the work area and equipment in a clean and orderly condition. Required to work independent of supervision for after-hours call-outs. Compliance & Documentation Maintain detailed inspection records, test reports, and repair certifications. Ensure compliance with ASME, API, ISO, and other applicable standards. Support audits by regulatory bodies and internal quality teams. Continuous Improvement Identify recurring defects and recommend corrective/preventive actions. Collaborate with technicians and engineers to improve repair processes. Provide training and guidance on quality standards and inspection techniques. Inspects valve and/or actuation assets against inspection forms. Ensures compliance to repair procedures and standards. Initiate non-conformances for assets that fail inspections against inspection forms. Monitor status of open non-conformances and work with Supervisors and Managers to ensure timely action. Escalate Quality Issues to relevant leadership as necessary. Suggest quality and process improvements to leadership. Drive implementation of processes as required. Monitor and report out established KPI's relevant at final inspection, like First Pass Yield % (FPY). QUALIFICATIONS: Education / Experience / Skills Technical diploma or degree in Mechanical Engineering or related field. Minimum 3-5 years of experience in valve inspection, repair, or industrial equipment quality assurance. Strong knowledge of pressure relief valve standards (ASME Section VIII, API 576, NBIC). Proficiency in using precision measuring instruments (micrometers, calipers, gauges). Ability to work non standard hours/after hours. Familiarity with non-destructive testing (NDT) methods is a plus. Strong organizational skills with exceptional attention to detail are required. COMPETENCIES: Ability to safely use and maintain a large variety of tools and equipment, associated with the assembly of relief valves, including impact wrenches, electric and manual hand tools, lapping machines, and overhead cranes and forklifts. Ability to read customer specification sheets and basic dimensional drawings. Ability to read and interpret assembly manuals (i.e. Manufacturers' Spring charts), engineering drawings and technical specifications. Good computer skills. Ability to work independently or as a team member. Ability to work with minimum supervision. Attention to detail and strong analytical skills. Excellent documentation and reporting skills. Strong communication and teamwork abilities. Commitment to safety and regulatory compliance.

Job Details Experienced Geospace Technologies - Houston, TX Full Time Any None Day QA - Quality ControlDescription Perform precision mechanical and electrical inspection/test of custom manufactured and commercial off the shelf parts and assemblies. Will provide inspection support in the areas of incoming quality control, internal first articles and in-process inspections. - Inspect machined/molded parts to assure conformance to engineering drawings and/or other documentation. - Document inspection results using manual and computer-based systems. - Generate Material Non-Conformance reports for items not meeting specifications. - Interface with personnel within the quality department regarding work assignments and priorities. - Interface with personnel in engineering, manufacturing and sales to resolve any issues relating to specifications or non-conformances. - Other duties as assigned by the department lead, supervisor or manager. Qualifications Previous experience in a precision mechanical inspection environment, such as a machine shop, molding shop or other fabrication/manufacturing company.Hands-on experience with common inspection tools such as: - Micrometers - Calipers - Pin/Plug Gages - Ring Gages - Go/No Go Gages - Height Gages - Profile Projectors - Profilometers - Surface Plates - Reading and interpretation of engineering drawings and specifications. - Computer skills, including familiarity with Microsoft Word and Excel. - Strong communication skills, both verbal and written. - Experience in use of and/or programming of automated inspection tools, such as vision inspection systems and CMMs. - Experience working in an ISO 9001 manufacturing environment. Education/Training: Required: High school diploma or equivalent (two years of college preferred), 3 to 5 years' experience in a manufacturing environment as a quality control inspector/technician. Preferred: ASQ Certified Quality Inspector. Working Conditions & Safety Concerns: Operates sophisticated inspection/test equipment in a laboratory and/or shop floor manufacturing environment. Works at a PC station as needed. Assists manufacturing personnel on the floor as needed. Some physical activity required. General safety practices followed, including use of personal protective equipment (PPE) such as safety glasses and steel toe shoes as required. Equal Employment Opportunity: All qualified candidates will receive consideration for all positions without regard to race, color, religion, sex, age, national origin, veteran status, disability, political affiliation, marital status, sexual orientation, or other non-merit factors. Must be able to work without sponsorship/authorization for any employer in the U.S.

Job Details Houston DIS - Houston, TX Full TimeDescription The QA/QC Inspector is responsible for the quality inspection of products manufactured or repaired by Drilling Tools International as well as approved suppliers. The QA/QC Inspector is responsible for adhering to all safety and quality policies for Drilling Tools International, Inc. Education: High School Diploma or GED preferred Experience: 2 years working experience in a Machine Shop or Quality role Machining or QC inspection of API RSC preferred Prior experience in Documentation Control Experience in implementation and auditing of management system requirements established by API Q1 & ISO 9001 preferred. Preferred experience with implementing and/or auditing the requirements of API 7-1 & API 7-2 Specifications Key Responsibilities / Essential Functions of the Position: Develop a strong understanding of the DTI QMS and Safety programs and provide training as required by the DTI Training and Qualification procedure Perform inspections on manufactured parts, in-process inspections and receiving inspection to verify product meets specifications and are free of damage or defects Responsible for Control of Calibrated equipment requirements and ensuring all equipment requiring calibration are kept under control Track NCR's for timely closure and adequate corrective actions Verify that product is manufactured according to specified drawings by performing in-process inspections Perform incoming inspection on selected and identified products Report any product issues to management that may affect functionality Perform, document, and report out on incoming inspections on critical or identified parts Perform other duties and/or special projects as assigned Qualifications Qualifications: Proficient with software applications applicable to the job Ability to read engineering drawings and specifications Prior experience in inspection processes for manufacturing Ability to use inspection tools such as calipers, micrometer, gages Demonstrated oral and written communication skills Strong interpersonal and leadership skills Ability to read and translate drawings, repair procedures and quality documents Basic computer skills in Outlook and Microsoft applications (word, excel, PowerPoint)

Job Details Entry OK Corporate - Oklahoma City, OK Full Time High School $18.00 Hourly None Day QA - Quality ControlDescription Implements the Quality Management System to ensure production of products consistent with established standards. ESSENTIAL JOB FUNCTIONS: *Verify Orders *Measure Parts *Hydrostatic Testing Inspections *Stamp Valves *Maintain log books *Inspect Valves *Conduct Audits *Maintain all tools and equipment, keeping them in working order. *House keeping within area *Maintain paperwork *Process Return Authorization items accordingly Qualifications SKILLS REQUIRED: *Must be able to read various measuring devices such as calipers, micrometers, dial indicators, and others. *Must be able to read drawings and blueprints. *Ability to communicate with other departments within the company. *Dependability. *Proficient with computers.

Job Description Key Activities and Accountabilities Perform inspection (visual, dimensional, gauging and comparison as appropriate) on new manufactured, repaired and modified equipment and components pre, during and post qualification testing Raise Non-conformance Reports against non-conforming equipment / components and manufacturing, repair, modification quality records Work in accordance with Goods Inwards Quality Procedures Ensure inspection measuring equipment is kept safe, clean, fit for purpose and in current calibration Perform inspection surveys on returned operational equipment (Rosehill Resource and Customer owned) Perform Quality Control checks to Operations Support processes at key stages (i.e. prior to final shipment, job card completion etc.,) Perform Non Destructive Testing on components for certification purposes Witness pressure testing of equipment for certification to ensure that the tests are conducted to the required standards Job Knowledge and Qualifications Experience in a similar role - inspection of mechanical components & assemblies Trained and Experienced Internal Quality Auditor would be an advantage Good knowledge of workshop procedures and practices Knowledge of Risk Assessment/Job Card/Engineering Test Procedure compliance Able to display quality control/certification techniques Knowledge of MS Office (Excel, Word, Outlook & Teams) Ability to read and interpret drawings & technical documentation

SHIFT: Day /OBJECTIVE The QC Inspector will be responsible for approving incoming, in-process, and finished materials for defects. The QC inspector will also be responsible for documenting inspection results, taking measurements, and tracking defects. ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Reports to QC Lead person for daily activities Perform and document dimensional and visual checks of production parts and incoming goods. Responsible for notifying Quality Control Lead person, in addition to Manufacturing and Engineering, of non-conforming goods. Inspect customer-supplied inserts, per drawings supplied. Ring check and approve production tryouts to engineered tolerances. Inspection of buy-out materials. Make first-piece inspection and document ring checks. Shipping certifications. Log and verify traceability packets. Implement and practice Lean Manufacturing tools including 5S, increased productivity, and eliminate waste. Maintain a 5S checklist as it applies to your work area. Perform other related duties assigned by QA Manager or QC Lead person Other Requirements An annual vision examination is required. Must be able to use measuring devices. Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials. Must be able to lift 50 lbs., 3 ft. high. Required Education and Experience High school diploma or equivalent, with 4-5 years of work-related experience. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times. Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 25 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit; and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Travel None EEO STATEMENT Utex Industries is an equal employment opportunity employer and shall make all employment-related decisions without regard to race, color, national origin, ancestry, religion, creed, age, sex, sexual orientation, marital status, military or veteran status, and/or any other status or condition protected by applicable federal, state, or local law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

/OBJECTIVE The QC Inspector will be responsible for approving incoming, in-process, and finished materials according to Internal and Customer requirements. The QC inspector will also be responsible for creating and documenting inspection results, taking measurements, and tracking non-conforming product. ESSENTIAL FUNCTIONS Reports to QC Leadperson and/or Supervisor for daily activities and workload. Perform and document dimensional and visual checks of production parts and incoming goods and creating inspection reports to internal and customer requirement. Responsible for notifying Quality Control Leadperson and/or Supervisor, in addition to Manufacturing and Engineering personnel, of non-conforming goods. Inspect customer supplied material, per specified drawings. Inspecting and gathering product documentation, final document packets, material heat reports as required. Inspection of buy-out materials. Make First Article inspection and document inspection results. Log and verify traceability packets. Implement and practice Lean Manufacturing tools including 5S, increased productivity, and eliminating waste. Maintain 5S checklist as it applies to your work area. Perform other related duties assigned by QA Manager or QC Leadperson or QC Supervisor. Other Requirements An annual vision examination is required. Must have experience with the use of measuring instruments in the completion of dimensional inspections. (Calipers, micrometers, CMM, Pi tapes, Optical comparators, etc.) Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials and manufactured products. Must be able to lift 50 lbs., 3 ft. high. Required Education and Experience High school diploma or equivalent, with 2-3 years of work-related experience. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 25 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit; and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Travel None EEO STATEMENT Utex Industries is an equal employment opportunity employer and shall make all employment-related decisions without regard to race, color, national origin, ancestry, religion, creed, age, sex, sexual orientation, marital status, military or veteran status, and/or any other status or condition protected by applicable federal, state, or local law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

SHIFT: Day /OBJECTIVE The QC Inspector will be responsible for approving incoming, in-process, and finished materials for defects. The QC inspector will also be responsible for documenting inspection results, taking measurements, and tracking defects. ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Reports to QC Lead person for daily activities Perform and document dimensional and visual checks of production parts and incoming goods. Responsible for notifying Quality Control Lead person, in addition to Manufacturing and Engineering, of non-conforming goods. Inspect customer-supplied inserts, per drawings supplied. Ring check and approve production tryouts to engineered tolerances. Inspection of buy-out materials. Make first-piece inspection and document ring checks. Shipping certifications. Log and verify traceability packets. Implement and practice Lean Manufacturing tools including 5S, increased productivity, and eliminate waste. Maintain a 5S checklist as it applies to your work area. Perform other related duties assigned by QA Manager or QC Lead person Other Requirements An annual vision examination is required. Must be able to use measuring devices. Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials. Must be able to lift 50 lbs., 3 ft. high. Required Education and Experience High school diploma or equivalent, with 4-5 years of work-related experience. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times. Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 25 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit; and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Travel None EEO STATEMENT Utex Industries is an equal employment opportunity employer and shall make all employment-related decisions without regard to race, color, national origin, ancestry, religion, creed, age, sex, sexual orientation, marital status, military or veteran status, and/or any other status or condition protected by applicable federal, state, or local law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

/OBJECTIVE The QC Inspector will be responsible for approving incoming, in-process, and finished materials according to Internal and Customer requirements. The QC inspector will also be responsible for creating and documenting inspection results, taking measurements, and tracking non-conforming product. ESSENTIAL FUNCTIONS Reports to QC Leadperson and/or Supervisor for daily activities and workload. Perform and document dimensional and visual checks of production parts and incoming goods and creating inspection reports to internal and customer requirement. Responsible for notifying Quality Control Leadperson and/or Supervisor, in addition to Manufacturing and Engineering personnel, of non-conforming goods. Inspect customer supplied material, per specified drawings. Inspecting and gathering product documentation, final document packets, material heat reports as required. Inspection of buy-out materials. Make First Article inspection and document inspection results. Log and verify traceability packets. Implement and practice Lean Manufacturing tools including 5S, increased productivity, and eliminating waste. Maintain 5S checklist as it applies to your work area. Perform other related duties assigned by QA Manager or QC Leadperson or QC Supervisor. Other Requirements An annual vision examination is required. Must have experience with the use of measuring instruments in the completion of dimensional inspections. (Calipers, micrometers, CMM, Pi tapes, Optical comparators, etc.) Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials and manufactured products. Must be able to lift 50 lbs., 3 ft. high. Required Education and Experience High school diploma or equivalent, with 2-3 years of work-related experience. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 25 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit; and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Travel None EEO STATEMENT Utex Industries is an equal employment opportunity employer and shall make all employment-related decisions without regard to race, color, national origin, ancestry, religion, creed, age, sex, sexual orientation, marital status, military or veteran status, and/or any other status or condition protected by applicable federal, state, or local law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Junior Petroleum Inspector Camin Cargo is a leading provider of inspection, testing, and certification services in the oil and gas industry. We are committed to ensuring the highest standards of safety, quality, and compliance for our clients worldwide. We are seeking an energetic Junior Petroleum Inspector to join our team and contribute to the success and growth of the organization. Position Summary The Junior Petroleum Inspector is responsible for conducting inspections and tests of various petroleum products to ensure compliance with industry standards and regulations. This role plays a crucial part in maintaining product quality and safety throughout our operations. This entry-level position provides a valuable opportunity for individuals looking to start their career in the oil and gas sector. Responsibilities To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Under supervision, responsible for measuring, gauging, and recording temperatures of various materials in shore tanks, as well as collecting samples from barges. Conduct field calculations in accordance with company guidelines and American Petroleum Institute (API) standards. Collect, label, and deliver samples to the laboratory promptly, in line with job requirements. Document inspection findings and prepare comprehensive reports for management review. Evaluate equipment, processes, and safety measures to ensure compliance with industry standards and regulatory requirements. Collaborate with the inspector trainer to identify opportunities for improvement and implement strategies to mitigate risks. All other job duties as defined. Minimum Requirements High School Diploma or equivalent. Basic understanding of safety regulations and quality control processes in petroleum operations. Strong math comprehension skills and attention to detail. Excellent communication and interpersonal skills with the ability to collaborate effectively with customers. Ability to work independently and as part of a team. Willingness to work in various outdoor environments and adhere to safety protocols. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours. Ability to work in outdoor environments, often in varying weather conditions. Ability to lift and carry up to 50 pounds. Frequent walking, climbing, and standing for extended periods. Candidates must be able to pass a Fit for Duty test, ensuring they are physically capable of performing job duties in a safe and efficient manner. Use of personal protective equipment (PPE) as required. All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

About Company: Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent and ethical manner with fairness, sincerity and honesty Integrity: Create an empowered, engaging and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Delivers mission critical services at terminals and refineries across the oil, gas and petrochemical (“OG&P”) value chain, including both load and discharge operations Integral partner within the processing and transportation segments of the petroleum value chain Unique, service-focused culture combining industry leading technology with unparalleled customer service Camin has developed a state-of-the-art proprietary technology platform that enhances efficiency of services and helps customers minimize costs and expedite fuel / cargo transfers Industry Leading Technology Platform About the Role: The Junior Inspector plays a critical role in ensuring that business operations and services meet established quality and compliance standards within the Baton Rouge, LA area. This position involves conducting thorough inspections, documenting findings accurately, and collaborating with senior inspectors and management to address any discrepancies or issues identified. The Junior Inspector will contribute to maintaining the integrity and reputation of the organization by upholding regulatory requirements and internal policies. This role requires attention to detail, strong observational skills, and the ability to communicate effectively with various stakeholders. Ultimately, the Junior Inspector supports the continuous improvement of business services by identifying areas for enhancement and ensuring corrective actions are implemented promptly. Minimum Qualifications: High school diploma or equivalent. Basic understanding of inspection procedures and quality control principles. Strong attention to detail and observational skills. Ability to communicate clearly both verbally and in writing. Willingness to learn and adapt to new inspection techniques and regulatory requirements. Preferred Qualifications: Associate degree or certification related to quality control, business services, or a related field. Previous experience in an inspection or quality assurance role. Familiarity with local and state regulations applicable to business services in Louisiana. Proficiency with inspection software or data management tools. Strong organizational and time management skills. Responsibilities: Conduct detailed inspections of business operations, facilities, and services to ensure compliance with company standards and regulatory requirements. Document inspection results clearly and accurately, preparing reports that highlight findings and recommend corrective actions when necessary. Collaborate with senior inspectors and management to develop and implement inspection plans and schedules. Follow up on identified issues to verify that corrective measures have been effectively applied. Maintain up-to-date knowledge of relevant regulations, industry standards, and best practices to ensure inspections are thorough and compliant. Skills: The Junior Inspector utilizes strong observational and analytical skills daily to identify potential compliance issues and quality concerns during inspections. Effective communication skills are essential for documenting findings clearly and collaborating with team members to resolve issues. Attention to detail ensures that no aspect of the inspection is overlooked, supporting accurate and reliable reporting. Familiarity with inspection tools and software enhances efficiency and accuracy in data collection and management. Additionally, adaptability and a willingness to learn enable the Junior Inspector to stay current with evolving regulations and inspection methodologies, contributing to continuous improvement in business service quality.