Quality Control Engineer jobs at BAUER Group

Thalle Construction Co., Inc. is pleased to announce a career opportunity for a Quality Control Technician on the Central Everglades Planning Project (CEPP) Everglades Agricultural Area (EAA) A-2 Reservoir in Palm Beach County, Florida. This project marks the largest contract in the Jacksonville District's history, valued at $2.87 billion. Thalle will oversee the construction of a 17.75-mile embankment dam and associated structures. This project offers potential Project Team members a valuable opportunity to broaden their professional experience and advance their careers throughout its duration. The CEPP plays a vital role in Everglades restoration, aiming to enhance ecosystem health, improve water storage, and increase resilience to climate change. Thalle, established in 1947, is a heavy civil construction company with a corporate office located in Hillsborough, NC and a regional office in Alvarado, Texas. Thalle currently has active heavy civil construction projects spanning from New York to South Florida to Texas and continuing to expand our geographical footprint. Our diverse and expansive project scope of heavy civil infrastructure projects incorporates all degrees of civil construction that includes but is not limited to; Conventional Concrete, Roller Compacted Concrete and Earthen Dams, Navigational Waterway Locks, Reservoirs, Large Diameter Underground Utilities, Treatment Facilities, Landfills, Site Work, Mass Soil & Rock Excavation, Coal Ash Closures, DOT Highway & Bridge Construction, and on demand emergency services, etc. We are a proud representative of The Tully Group (Tully) who was established in 1921 and developed into one of the nation's largest privately held, family-owned construction firms. Tully's corporate office, located in New York City, has provided an opportunity to develop and sustain a long history of heavy civil projects in the Metro New York Area and New Jersey. Visit ***************** for more information. Safety is our TOP priority! Thalle offers a competitive salary package with a full range of benefits, including Major Medical, Dental, Vision, Short and Long-Term Disability, generous PTO, paid company holidays, Life Insurance, and 401K with a company match, and more! Compensation is based on experience and qualifications. Thalle is an Equal Opportunity Employer, E-Verify, and Drug Free Workplace. Location: Palm Beach County, FL Job Title: Quality Control Technician Overview: The Quality Control Technician is responsible for full inspection of products and installation to ensure compliance with the contract plans and specifications. This position reports to, collaborates with, and follows the direction of the Quality Control Manager. Duties and Responsibilities: Inspect work during construction and during final inspection to ensure compliance with the contract documents. Provide inspection for surface preparation, concrete testing data, formwork, misc. metals, reinforcing bar, water stop, concrete finish and curing operations. Review installation plans and materials to ensure compliance with the contract document. Prepare daily field inspection reports. Report deficiencies to the project Quality Control and Operations Teams. Education and/or Work Experience Requirements: 5 (+) years' experience in the area of heavy civil works construction similar to the work being performed at this project. Ability to interpret complex construction plans and specifications. Ability to write reports using Microsoft Word or Excel. Ability to work with a fast-paced team in an aggressive construction environment. United States Army Corps of Engineers Project Experience is preferred. Strong ability to multitask, work independently under pressure, and within tight deadlines. Prior heavy civil site project experience such as water control, dam, levee, concrete, and mass excavation experience. Physical Requirements: Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state, and local standards. Must be able to lift and carry up to 50 lbs. Must be able to move freely about a construction site that at times present a demanding terrain including, but not limited to climbing of ladders and stair towers, uneven and often wet surfaces, and slopes. Must be able to talk, listen and speak clearly on telephone.

The Associate Quality Manager is charged with assisting the Quality Control Manager in carrying out duties and responsibilities to ensure acceptable product quality at each phase of the manufacturing process. The Associate Quality Manager ensures a timely and orderly distribution of quality cement to our valued customer base. Managing timely receipt and quality of raw materials associated with challenges imposed by current environmental regulations is a necessity. Participates in the improvement of the Plant's technical capabilities. This position has a requirement of elevating the technical knowledge and practices of all facets of the operation. In this regard, the Associate Quality Manager will be fundamental to completing the technical triangle of quality-production-maintenance. In the absence of the QC Manager, the Coordinator assumes responsibility and authority for that position. Role & Responsibilities Responsibilities: Supervise lab operators, lab facility and maintaining QC equipment Perform all tasks safely and efficiently. Observes safety regulations and always established operational procedures. Promotes safety practices and efforts throughout the plant. Maintains close contact with all phases of plant operation and informs the appropriate personnel of situations detrimental to product quality and production. Initiate, direct and participate in studies designed to optimize cement manufacturing. Monitors quality of incoming raw materials and fuels. Balances rates of additives used to maintain quality and minimize cost. Performs method development for new laboratory analysis. Provide leadership and training for quality and production members to meet Customer expectations, plant objectives, DOT, AASHTO and ASTM Standards. Identify and record quality problems; initiate, recommend or provide solutions through designated channels; and verify the implementation of solutions. Maintain effective relations with customer services, sales and all plant departments. Generate administrative paperwork associated with general laboratory and operations management. Utilize statistical tools along with computer systems and automated analysis equipment to assist in process and product evaluation. Initiate, participate in and direct audits as required. Performing other duties as assigned Educational Requirements: Bachelor's degree in chemical engineering or other related field with three (3) years' experience in a cement or other related industry OR an appropriate combination of education and experience. Experience/Skills Requirements: Prefer minimum 3 years' experience in cement quality control or process engineering. Prior experience in a cement-manufacturing environment with increasing responsibilities for quality product compliance. Complete working knowledge of all equipment in laboratory Ability to learn numerous software systems Problem solving: Ability to conduct Root Cause Analysis for quality related issues Requires good computer skills, must be able to effectively communicate, coordinate, interface, and correspond with customers and plant staff. Benefits Recession Resistant Industry Consistent work, with a work/life balance Paid Holidays Paid Time Off 401(k) Plan w/ employer match contribution Medical / Dental / Vision plan offered Life Insurance - Company Paid Short-term / Long-term Disability Insurance - Company Paid Get Hired What to Expect During our Hiring Process Background Check Motor Vehicle Record Check 5-Panel Drug Screen Fit for Duty Baseline Physical (if applicable) A great team to support you throughout your career with Summit Materials companies! Build a Lasting Career with us. Begin Here. Go Anywhere. Apply now! Summit Materials consists of more than a dozen local companies that supply aggregates, cement, ready-mix concrete, asphalt paving, and construction services in the United States and western Canada. At Summit Materials, we support our teammates who lay the groundwork for our communities and live by our core values: Safety, Integrity, Sustainability, and Inclusivity. We're passionate about our teammates, our work, and our communities. Each of Summit's companies celebrates their individual legacies, but together - we are Summit Materials. At Summit Materials, we provide the foundation to connect our communities today and build a better tomorrow. We value all our communities - including our diverse internal community of teammates that make us stronger. No matter your race, ethnicity, gender, age, or anything that makes you who you are...you belong.

Since 1996, RQC, LLC. has been a leading player in Southern California's robust commercial and governmental Design-Build economy. Headquartered in beautiful Carlsbad, CA, we are a full-service Design-Build company. We offer management of projects throughout the United States, with our field operations team members who work on location for each of our projects. We specialize in fast-track projects in new commercial construction for both public and private clients, with a primary focus on the Department of Defense market. We are looking for a Construction Quality Control Manager candidate to join our Field Operations team. Project assignment is located in Pensacola, FL on an active military base. QC Managers are responsible for planning, coordinating, and implementing a project-specific quality control program, executing its performance according to contract requirements, completing administrative documentation on time, and cultivating customer satisfaction with the client, all in alignment with RQ's Mission, Vision, and Values. Local candidates will be given preference depending on the location of the project, though relocation or travel to on-site management will be required for the QC Manager position. The QC Manager position must work on-site. Pay: $110K-145k per year, depending on experience Benefits: Medical, Dental, Vision, 401K/Match Ideal Candidates will have the following experience: * A BA/BS degree in Industrial/Construction/Electrical/ Mechanical/Civil Engineering, Construction Management, Architecture, or a related field is the minimum formal education preferred for this position. A combination of equivalent work experience and training in the field may be qualifying. * Ten or more years combined experience (or equivalent) in the commercial construction industry as a Superintendent, QC Manager, Project Manager, or Project Engineer required, as well as two years' experience as a QC Manager required. * A current USACE CQM for Contractors Certificate is required and RMS/QCS training is preferred (training is available). * Specialty inspection training and licenses/certs highly desired. * LEED AP, AP+, or Green Associate (GA) Certificate preferred. * Level 1 EM 385-1-1, CRP, First Aid, OSHA 30-hour certifications required. Training can be provided. * Computer literacy (Microsoft Office, Outlook, Internet, etc.) required. * Specific software literacy (Procore, Autodesk Build, RMS/QCS) preferred. COMPANY PROFILE: RQC, LLC is a full-service contracting and design firm that specializes in Design/Build projects for both public and private clients, with a primary focus on the Department of Defense. Our mission is "to provide our customers the best-built environment while being the first choice of all stakeholders." We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, creed, gender (including gender identity and gender expression), religion (all aspects of religious beliefs, observance or practice, including religious dress or grooming practices) marital status, registered domestic partner status, age, national origin or ancestry, physical or mental disability, medical condition (including cancer or a record or history of cancer, and genetic characteristics), sex (including pregnancy, childbirth, breastfeeding or related medical condition), genetic information, sexual orientation, veteran status, or any other basis or status protected by federal, state, or local law or ordinance or regulation. All candidates considered for hire must provide evidence of identity and U.S. work authorization at the time of hire. Additionally, all candidates must successfully pass a drug screening and commercial criminal background check, including a stricter Department of Defense background check, for access to job site at military base (if applicable for position being hired for).

The Associate Quality Manager is charged with assisting the Quality Control Manager in carrying out duties and responsibilities to ensure acceptable product quality at each phase of the manufacturing process. The Associate Quality Manager ensures a timely and orderly distribution of quality cement to our valued customer base. Managing timely receipt and quality of raw materials associated with challenges imposed by current environmental regulations is a necessity. Participates in the improvement of the Plant's technical capabilities. This position has a requirement of elevating the technical knowledge and practices of all facets of the operation. In this regard, the Associate Quality Manager will be fundamental to completing the technical triangle of quality-production-maintenance. In the absence of the QC Manager, the Coordinator assumes responsibility and authority for that position. Role & Responsibilities Responsibilities: * Supervise lab operators, lab facility and maintaining QC equipment * Perform all tasks safely and efficiently. Observes safety regulations and always established operational procedures. Promotes safety practices and efforts throughout the plant. * Maintains close contact with all phases of plant operation and informs the appropriate personnel of situations detrimental to product quality and production. * Initiate, direct and participate in studies designed to optimize cement manufacturing. * Monitors quality of incoming raw materials and fuels. * Balances rates of additives used to maintain quality and minimize cost. * Performs method development for new laboratory analysis. * Provide leadership and training for quality and production members to meet Customer expectations, plant objectives, DOT, AASHTO and ASTM Standards. * Identify and record quality problems; initiate, recommend or provide solutions through designated channels; and verify the implementation of solutions. * Maintain effective relations with customer services, sales and all plant departments. * Generate administrative paperwork associated with general laboratory and operations management. * Utilize statistical tools along with computer systems and automated analysis equipment to assist in process and product evaluation. * Initiate, participate in and direct audits as required. * Performing other duties as assigned #LI-SS Educational Requirements: * Bachelor's degree in chemical engineering or other related field with three (3) years' experience in a cement or other related industry OR an appropriate combination of education and experience. Experience/Skills Requirements: * Prefer minimum 3 years' experience in cement quality control or process engineering. * Prior experience in a cement-manufacturing environment with increasing responsibilities for quality product compliance. * Complete working knowledge of all equipment in laboratory * Ability to learn numerous software systems * Problem solving: Ability to conduct Root Cause Analysis for quality related issues * Requires good computer skills, must be able to effectively communicate, coordinate, interface, and correspond with customers and plant staff. Benefits * Recession Resistant Industry * Consistent work, with a work/life balance * Paid Holidays * Paid Time Off * 401(k) Plan w/ employer match contribution * Medical / Dental / Vision plan offered * Life Insurance - Company Paid * Short-term / Long-term Disability Insurance - Company Paid Get Hired What to Expect During our Hiring Process * Background Check * Motor Vehicle Record Check * 5-Panel Drug Screen * Fit for Duty Baseline Physical (if applicable) * A great team to support you throughout your career with Summit Materials companies! Build a Lasting Career with us. Begin Here. Go Anywhere. Apply now! Summit Materials consists of more than a dozen local companies that supply aggregates, cement, ready-mix concrete, asphalt paving, and construction services in the United States and western Canada. At Summit Materials, we support our teammates who lay the groundwork for our communities and live by our core values: Safety, Integrity, Sustainability, and Inclusivity. We're passionate about our teammates, our work, and our communities. Each of Summit's companies celebrates their individual legacies, but together - we are Summit Materials. At Summit Materials, we provide the foundation to connect our communities today and build a better tomorrow. We value all our communities - including our diverse internal community of teammates that make us stronger. No matter your race, ethnicity, gender, age, or anything that makes you who you are...you belong. Req #: 2013

We, at RQ Construction, LLC are looking for Construction Quality Control Managers (CQCM) to join our Field Operations team. Project assignments could be located throughout the Southeastern US and will require working on an active project on a military base. This particular opportunity is in Jacksonville area in FL. QC Managers are responsible for planning, coordinating, and implementing a project-specific quality control program, executing its performance according to contract requirements, completing administrative documentation on time, and cultivating customer satisfaction with the client, all in alignment with RQ's Mission, Vision, and Values. Preference will be given to local candidates depending on the project location. Relocation or travel will be required, as the QC Manager role is an on-site position The pay range for this opening is $110-145k. Benefits: Medical, Dental, Vision, 401K/Match * Ten (10) or more years combined experience (or equivalent) in commercial construction industry as a Superintendent, QC Manager, Project Manager, or Project Engineer required, as well as two years' experience as a QC Manager required. * A current USACE CQM for Contractors Certificate is required and RMS/QCS training is preferred (training is available). * Specialty inspection training and licenses/certs highly desired. * LEED AP, AP+ or Green Associate (GA) Certificate preferred. * Level 1 EM 385-1-1, CRP, First Aid, OSHA 30-hour certifications required. Training can be provided. * Computer literacy (Microsoft Office, Outlook, Internet, etc.) required. * Specific software literacy (Viewpoint/Vista, RMS/QCS) preferred. A bit about RQ-Since 1996, RQC, LLC. has been a leading player in Southern California's robust commercial and governmental Design-Build economy. We now have a national presence with current projects approaching $1B, spanning coast to coast. Headquartered in beautiful Carlsbad, CA, we are a full-service Design-Build company. We offer management of projects throughout the United States, with our field operations' team members who work on location for each of our projects. We specialize in fast-track projects in new commercial construction for both public and private clients, with a primary focus in the Department of Defense market. COMPANY PROFILE: RQC, LLC is a full service contracting and design firm that specializes in Design/Build projects for both public and private clients, with a primary focus on the Department of Defense. Our mission is "to provide our customers the best built environment while being the first choice of all stakeholders." The firm offers a variety of services including construction, architectural design, trade services, virtual design and construction, and LEED/sustainable design management for projects ranging from $25M to over $250M. RQ's experience includes projects throughout the U.S., as well as internationally at U.S. Naval Base Guantanamo Bay, Cuba and Puerto Rico. The success of this company has been built on three pillars: Quality, Integrity, and Leadership. Our employees work hard as a team, thrive on innovation and remain committed to being the first choice of our clients as well as all other stakeholders. In return we offer an excellent work environment, very competitive compensation, and an outstanding benefits package. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, creed, gender (including gender identity and gender expression), religion (all aspects of religious beliefs, observance or practice, including religious dress or grooming practices) marital status, registered domestic partner status, age, national origin or ancestry, physical or mental disability, medical condition (including cancer or a record or history of cancer, and genetic characteristics), sex (including pregnancy, childbirth, breastfeeding or related medical condition), genetic information, sexual orientation, veteran status, or any other basis or status protected by federal, state, or local law or ordinance or regulation. All candidates considered for hire must provide evidence of identity and U.S. work authorization at the time of hire. Additionally, all candidates must successfully pass a drug screening and commercial criminal background check, including a stricter Department of Defense background check, for access to job site at military base (if applicable for position being hired for).

GMF Steel Group is looking for a high-energy, experienced Quality Control Manager. The Quality Control Manager is a key asset in our plant operations to ensure GMF's standards of excellence are achieved in safety, quality, and efficiency. This person will play a critical role in leading our quality assurance efforts and upholding GMF's high standards. Responsibilities: Lead and oversee the Quality Control team to ensure all inspections align with project specifications and GMF's quality standards Manage day-to-day operations of the Quality Control team, ensuring compliance standards are met Observe, inspect, and provide reports on GMF projects for compliance with plans and specifications regarding workmanship, materials, installation and construction methods, in accordance with AWS D1.1, D1.3, AISC Chapter N, and RCSC Perform structural & miscellaneous steel welding and erection inspections in accordance with AWS, AISC, and RCSC standards Provide recommendations or necessary changes to the project team regarding contract plans and specification relative to all phases of GMF scope of work Monitor GMFs quality system and administer the three-phase inspection process Provide surveillance at project sites and assist project team in problem resolution Review and maintain qualification and performance records to assure compliance Follow, maintain, and Improve GMF's AISC Certification Program Liaise Between Shop, Detailing, Purchasing, and Project Teams to maintain quality AISC standards Coordinate quality control efforts across departments, ensuring alignment among team members Certify that all welders have met qualification and performance requirements Review change orders, modifications, RFIs, and submittals Monitor projects schedule Review and ensure QA and safety plans are adhered to by the site personnel Qualifications: CWI preferred Ability to perform visual inspection of welds under the supervision of CWI Ability to verify dimensional requirements Proficient in Tekla EPM Go Ability to read structural steel drawings Good written and verbal communication skills and ability to work independently Willingness to travel overnight and work overtime when needed Familiar with AWS D1.1, D1.3, AISC Chapter N, and RCSC Capable of lifting at least 40 lbs Bilingual a plus Structural steel welding experience preferred Familiar with structural steel tolerances Perform weld inspections on structural steel Benefits/Perks: Health, Vision, Dental, Life Insurance, and a 401k Match Program Paid Time Off About GMF Steel Group: GMF Steel Group is an Inc 5000 company and one of the fastest growing Steel firms in the Southeastern US. GMF Steel Group is headquartered in Lakeland, Florida with offices in Tampa, Panama City, and Concord, NC. GMF Steel Group Fabrication Plant is located in Lakeland, Florida and produces over 20,000 tons of Structural Steel annually with the latest BIM fabrication technology. GMF Steel Group services the Southeastern US and Gulf Coast with over 300 employees across 4 offices. GMF Steel Group core sectors of the Structural Steel market include Amusement Parks, Stadiums, Arenas, Offices, Education, Healthcare, Hospitality, Retail, Light and Heavy Industrial projects. GMF incorporates the latest technology through Building Information Modeling (BIM) to integrate all facets of Steel Construction and 4-D modeling. GMF Steel Group is an AISC Certified Fabricator and AISC Advance Certified Erector. GMF Steel Group takes pride in recruiting and developing the best talent through education of the latest technology and best practices.

**Any Employment Offers are Contingent Upon Successful Completion of the Following:** + Verification of Work Authorization and Employment Eligibility + Substance Abuse Screening + Physical Exam (if applicable) + Background Checks for Badging/Security Clearances (if applicable) **About Hensel Phelps:** Founded in 1937, Hensel Phelps specializes in building development, construction and facility services in markets ranging from aviation to government, commercial, transportation, critical facilities, healthcare and transportation. Ranked #1 in aviation and #12 overall general contractor in 2021 by ENR, Hensel Phelps is one of the largest employee-owned general contractors in the country. Driven to deliver EXCELLENCE in all we do and supported by our core values of Ownership, Integrity, Builder, Diversity and Community-Hensel Phelps brings our clients' visions to life with a comprehensive approach that begins with innovative planning and extends throughout the life of the property. **Position Descriptions:** The Quality Control Engineer (QCE) is responsible for performing many of the quality control tasks at the project level as defined in the quality control plan for the project. The QC engineer exercises judgment and discretion in making quality control-related recommendations, implementing quality control policies and procedures, and handling a wide variety of quality control matters in the field and office. The QC engineer is typically assigned to a single project but may be required to support multiple smaller projects, when necessary. This is a safety sensitive position. **Position Qualifications:** + A 4-year degree in civil or structural engineering, architecture, or construction management. + Minimum of 1-2 years' experience on large commercial construction projects. + A valid Driver's License. + Strong communication skills (verbal and written). + Computer software - Microsoft Office Suite, specifically Excel-based templates, Prolog, Primavera and AutoCAD. + Proficiency with Microsoft Office applications (i.e., Excel, Word, PowerPoint, etc.). + Must be able to manage multiple tasks and have excellent follow-up skills both internally and externally. + Ability to work under pressure in a fast-paced, deadline-driven environment. + Strong understanding of federal, state, and local reporting requirements and regulations. **Essential Duties:** + Interface directly with the owner's quality assurance team on all quality-related issues. + Be technically experienced and capable of comprehending the specifications, standards and code requirements for all disciplines. + Participate in submittal reviews, weekly QC meetings and preparatory meetings. + Perform all initial and follow-up inspections and manage the punch list process. Inspections are conducted to verify that trade partner work complies with the project specifications and applicable codes. This includes performing material inspections to verify that the products are to specifications and that storage, staging and material handling methods are implemented. + Maintain records that identify areas inspected, tests performed and any significant findings. Initiate deficiency reports and track their resolution to the satisfaction of all stakeholders. + Work closely with trade partner quality control personnel to understand their QC procedures. Review the trade partner's quality control logs and ensure corrective actions are implemented, when required. + Assist with the coordination and scheduling of third-party testing and source inspections. Interface with third party testing agencies, as necessary. **Benefits:** Hensel Phelps provides generous benefits for our salaried employees. This position is eligible for company paid medical insurance, life insurance, accidental death & dismemberment, long-term disability, 401(K) retirement plan, health savings account (HSA) (HSA not available in Hawaii), and our employee assistance program (EAP). It also is eligible for employee paid enrollment in vision and dental insurance. Hensel Phelps also believes in the importance of taking time to recharge. As a result, salaried employees are eligible for paid time off beginning upon hire. Salaried positions (project engineers and above) participate in an annual bonus plan, subject to company and employee performance. Salaried employees (this is all salaried employees) are also eligible for a company cell phone or cell phone allowance in accordance with company policy. Further, salaried employees (project engineers and above) also receive either a vehicle or vehicle allowance in accordance with Hensel Phelps' policies. Based on position location, a cost of living adjustment (COLA) may also be included (subject to periodic review and adjustment). **Equal Opportunity and Affirmative Action Employer:** Hensel Phelps is an equal opportunity and affirmative action employer. Hensel Phelps shall not discriminate against any employee or applicant for employment on the basis of race, color, religion, sex, age, national origin, sexual orientation, gender identity and expression, domestic partner status, pregnancy, disability, citizenship, genetic information, protected veteran status, or any other characteristic protected by federal, state, or local law. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Since 1996, RQC, LLC. has been a leading player in Southern California's robust commercial and governmental Design-Build economy. Headquartered in beautiful Carlsbad, CA, we are a full-service Design-Build company. We offer management of projects throughout the United States, with our field operations team members who work on location for each of our projects. We specialize in fast-track projects in new commercial construction for both public and private clients, with a primary focus on the Department of Defense market. We are looking for a Construction Quality Control Manager candidate to join our Field Operations team. Project assignment is located on Hurlburt Field, an active military base in FL. QC Managers are responsible for planning, coordinating, and implementing a project-specific quality control program, executing its performance according to contract requirements, completing administrative documentation on time, and cultivating customer satisfaction with the client, all in alignment with RQ's Mission, Vision, and Values. Local candidates will be given preference depending on the location of the project, though relocation or travel to on-site management will be required for the QC Manager position. The QC Manager position must work on-site. Pay: $110K-145k per year, depending on experience Benefits: Medical, Dental, Vision, 401K/Match Ideal Candidates will have the following experience: * A BA/BS degree in Industrial/Construction/Electrical/ Mechanical/Civil Engineering, Construction Management, Architecture, or a related field is the minimum formal education preferred for this position. A combination of equivalent work experience and training in the field may be qualifying. * Ten or more years combined experience (or equivalent) in the commercial construction industry as a Superintendent, QC Manager, Project Manager, or Project Engineer required, as well as two years' experience as a QC Manager required. * A current USACE CQM for Contractors Certificate is required and RMS/QCS training is preferred (training is available). * Specialty inspection training and licenses/certs highly desired. * LEED AP, AP+, or Green Associate (GA) Certificate preferred. * Level 1 EM 385-1-1, CRP, First Aid, OSHA 30-hour certifications required. Training can be provided. * Computer literacy (Microsoft Office, Outlook, Internet, etc.) required. * Specific software literacy (Procore, Autodesk Build, RMS/QCS) preferred. COMPANY PROFILE: RQC, LLC is a full-service contracting and design firm that specializes in Design/Build projects for both public and private clients, with a primary focus on the Department of Defense. Our mission is "to provide our customers the best-built environment while being the first choice of all stakeholders." We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, creed, gender (including gender identity and gender expression), religion (all aspects of religious beliefs, observance or practice, including religious dress or grooming practices) marital status, registered domestic partner status, age, national origin or ancestry, physical or mental disability, medical condition (including cancer or a record or history of cancer, and genetic characteristics), sex (including pregnancy, childbirth, breastfeeding or related medical condition), genetic information, sexual orientation, veteran status, or any other basis or status protected by federal, state, or local law or ordinance or regulation. All candidates considered for hire must provide evidence of identity and U.S. work authorization at the time of hire. Additionally, all candidates must successfully pass a drug screening and commercial criminal background check, including a stricter Department of Defense background check, for access to job site at military base (if applicable for position being hired for).

GARNEY CONSTRUCTION A Quality Control Manager position in Jacksonville, FL is available at Garney Construction. Join our Garney team to manage and support project Quality Management Specialists, ensuring each project is successful. The Quality Control Manager is responsible for the implementation, management, and execution of Quality Management Programs for Federal contracting projects. WHAT YOU WILL BE DOING * Develop and implement project Quality Management Systems to ensure compliance with contract quality standards * Review project CPM schedule to anticipate and request timely submittals * Review project schedules and prepare Government meeting notices to support schedules * Conduct weekly Quality Control meetings * Perform/supervise quality inspections as needed by the project or Project Manager * Provide effective and efficient communication with the Federal Government personnel * Promote Garney's safety programs and procedures to promote a safe working environment WHAT WE ARE LOOKING FOR * 10 years of construction experience, 3 years being Construction Quality Manager experience * Bachelor's Degree in Engineering, Construction Management, or related field * Current USACOE Construction Quality Management for Contractors Certification * EM 385 40 hour and OSHA 30-hour certifications LET'S TALK THE PERKS! * Employee Stock Ownership Plan (ESOP) * 401K Retirement plan * Health, dental, vision and life insurance * Flexible Spending Account (FSA) / Health Savings Account (HSA) * Long-term disability * Wellness program * Employee Assistance Plan * Holidays and PTO * Bonus program CONTACT US If you have questions about the position, please contact Patrick Duque at ************************ . Please include resumes, references, job lists, and any other relevant documentation. Garney Construction and its subsidiaries are committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Garney Construction is a background screening, drug-free workplace. Agency Disclaimer: All vendors must have a signed Garney Construction Agreement, authorized by the Executive Team, to receive payment for any placement. Verbal or written commitments made by anyone other than a member of the Executive Team will not be considered binding. Any unsolicited resumes sent to Garney Construction or submitted to employees outside of the Recruiting Team will be deemed the property of Garney Construction. In such cases, Garney Construction will not be obligated to pay any placement fees. THE BENEFITS OF WORKING AT GARNEY Free medical, prescription, dental, and vision plans ($0 premiums) Virtual doctor visits with no co-pay Shares of company stock at no cost starting your first day 401(k) plan with a 3.5% match Student loan resources Weekly paychecks Paid time off 8 paid holidays Health Savings Account (HSA) with a lump sum and matching contributions Free life insurance & disability policy Free access to healthcare coordinators Counseling sessions with mental health professionals at no cost Access to consultations with legal/financial professionals at no cost Free programs assisting with weight loss, maternity health, prescriptions for chronic conditions, and more 50% employee discount in the Garney apparel store BUILDING SUSTAINABLE FUTURES WITH THE WORLD'S MOST PRECIOUS RESOURCES-WATER AND PEOPLE. EEO - it's the law poster Right to work This organization participates in E-verify Nearest Major Market: Jacksonville

Travel: Up to 25% Number of Openings: 1 Achieve more in your career with the nation's leading specialty concrete contractor. At Baker Construction, you'll be part of a team that prioritizes people, invests in their development, and offers unparalleled opportunities for professional growth. In this role, you'll be integral to building the future of our country and our company. You'll collaborate across diverse teams, have a hand in significant projects, and dive headfirst into complex challenges with the best in the industry. If you are driven to do more and have the grit to follow through, you'll have everything you need to define your career on your terms. Make a meaningful impact with a team that values ambition and rewards initiative. Apply today and be more with Baker. Summary The Quality Control Manager directs all site quality control activities and manages the inspection staff. Typically certified as Inspector Level II or III in various disciplines. Roles and Responsibilities The Quality Control Manager will possess competency in the following areas in order to perform his/her role in a safe, productive, and effective manner. Note that the areas listed are intended to describe the general nature and level of work being performed by co-workers assigned to this role. They are not intended to be an exhaustive list of all the responsibilities, skills, efforts, or working conditions associated with this job. * Manages all Aspects of Quality Control * Oversees Staff * Ensures a Safe Work Environment * Participates in Training/Certifications Requirements * Bachelor's Degree in an engineering, scientific, or construction-related discipline from an accredited college or university and 8 years related experience and/or training; or 10 years equivalent combination of education and experience. * Knowledge of construction practices (i.e., formwork, rebar, concrete placing, etc.). * Quality assurance-related experience preferably in the nuclear power industry (DOE/DOD facilities). * Quality inspector experience. * Demonstrated skill and knowledge with applicable quality codes and standards preferably NRC regulations. At Baker Construction, we welcome those who are driven to make things happen. Your tenacity will be rewarded with great pay, excellent benefits, and opportunities to make your mark. This is an opportunity to own your future while working alongside co-workers who are united in our purpose to build better structures and better lives. Go further with an industry leader that puts people first, honors its word, and has the grit to achieve greatness. Baker is an EOE Disability/Veterans Employer. Applicants with physical and/or mental disabilities who require a reasonable accommodation for any or part of the application process may make their requests known by emailing ************************ or calling ************** and asking for HR. Nearest Major Market: Fort Lauderdale Nearest Secondary Market: Miami

Company Name: Baker Concrete Construction, Inc **Req ID** : 6915 **Travel:** Up to 25% **Number of Openings:** 1 Achieve more in your career with the nation's leading specialty concrete contractor. At Baker Construction, you'll be part of a team that prioritizes people, invests in their development, and offers unparalleled opportunities for professional growth. In this role, you'll be integral to building the future of our country and our company. You'll collaborate across diverse teams, have a hand in significant projects, and dive headfirst into complex challenges with the best in the industry. If you are driven to do more and have the grit to follow through, you'll have everything you need to define your career on your terms. Make a meaningful impact with a team that values ambition and rewards initiative. Apply today and be more with Baker. **Summary** The **Quality Control Manager** directs all site quality control activities and manages the inspection staff. Typically certified as Inspector Level II or III in various disciplines. **Roles and Responsibilities** The **Quality Control Manager** will possess competency in the following areas in order to perform his/her role in a safe, productive, and effective manner. Note that the areas listed are intended to describe the general nature and level of work being performed by co-workers assigned to this role. They are not intended to be an exhaustive list of all the responsibilities, skills, efforts, or working conditions associated with this job. + Manages all Aspects of Quality Control + Oversees Staff + Ensures a Safe Work Environment + Participates in Training/Certifications **Requirements** + Bachelor's Degree in an engineering, scientific, or construction-related discipline from an accredited college or university and 8 years related experience and/or training; or 10 years equivalent combination of education and experience. + Knowledge of construction practices (i.e., formwork, rebar, concrete placing, etc.). + Quality assurance-related experience preferably in the nuclear power industry (DOE/DOD facilities). + Quality inspector experience. + Demonstrated skill and knowledge with applicable quality codes and standards preferably NRC regulations. At Baker Construction, we welcome those who are driven to make things happen. Your tenacity will be rewarded with great pay, excellent benefits, and opportunities to make your mark. This is an opportunity to own your future while working alongside co-workers who are united in our purpose to build better structures and better lives. Go further with an industry leader that puts people first, honors its word, and has the grit to achieve greatness. Baker is an EOE Disability/Veterans Employer. Applicants with physical and/or mental disabilities who require a reasonable accommodation for any or part of the application process may make their requests known by emailing ************************ or calling ************** and asking for HR.

Job Description Design: Works with Project Managers, Project Engineers, Engineers, and designers to develop process flow diagrams, P&ID's, and equipment layouts to efficiently meet customer specifications; ensures designs and layouts conform to specifications, code requirements, and food safety requirements Provides direction to designers and CAD operators for creation of engineering drawings Develops design specifications for external suppliers including OEM's and Sub-Contractors Communicates directly with equipment vendors to obtain all necessary designs, drawings and utility information. Utilizes collected data to design equipment utility drawings Prepares contract documents, calculations, observation reports, and estimates Budget Control: Assists in bid process by estimating layout costs (design and material) for specified process; Seeks alternative methods that reduce cost of design; Reviews activities to ensure design stays within projected costs Client Interface: Effectively responds to needs and requests of client as needed Project Administration: Utilizes company software to ensure all necessary documents are in place and processed; Reviews and approves Engineering Change Notices; Develops and implements design project schedules; Schedules meetings as necessary with suppliers, owners, design teams, and permitting agencies; plans work schedules and timelines for support staff External Relationships: Coordinates with outside engineering and architectural resources on all aspects of design; communicates with permitting and regulatory agencies as necessary Provides on-site project support to assist in accurate process equipment installation with contractors using the project installation drawings Assists in updating all record data and drawings for final project completion Qualifications BS degree in Mechanical, Chemical, or similar relevant discipline 10+ years of professional experience 10+ years of progressive experience in Bakery process/manufacturing engineering environment Food Safety Designs and Guidelines Statistical Analysis & Technical Writing Skilled in relevant software; Procore, MS Office Suite, BlueBeam, Adobe, Power BI, AutoCAD and BIM / ACC Travel required to customer locations, OEM locations, and construction site locations. About Stellar Stellar offers a comprehensive package which includes: Competitive pay based on experience Remote & hybrid work options for many positions Paid Time Off - accrue 15 days (120 hours) within first year of service Paid holidays Medical, dental, and vision insurance options Tax-advantaged accounts (HSA, FSA, Dependent Care FSA) Company-paid life and disability insurance 401(k) - company match with immediate vesting Stellar, headquartered in Jacksonville, FL, is a fully integrated firm focusing on design, construction, architecture, engineering, and mechanical services worldwide for over 30 years. Stellar combines a multitude of capabilities to create buildings and systems of exceptional long-term quality, value and efficiency. From food processing plants and healthcare facilities to refrigerated warehouses, automated production lines and beyond, we offer an integrated approach to meet all our clients' needs. Stellar is an Equal Opportunity Employer and does not discriminate against any applicants for employment based on their race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, physical or mental disability, genetic information, veteran status, uniformed servicemember status, or any other status protected by law.

The Plumbing Quality Assurance Specialist at Power Design is the brain behind the quality of design for plumbing systems on our large-scale projects. As the specialist, you'll work on domestic water and sanitary system flow calculations, equipment selections, and piping layouts to ensure efficient and reliable plumbing design. Position Details/Responsibilities Coordinate the best design solutions for plumbing systems by applying industry knowledge and quality standards while considering customer needs and budgeting requirements. Provide design direction, support, and guidance to all team members, including working directly with Revit CADD technicians to ensure quality and review constructability. Communicate effectively with customers, project team members, and inspecting authorities. Apply plumbing code knowledge (IPC, UPC, NFPA, IECC, and local jurisdiction requirements). Here's What We're Looking For A team player who always acts with customers in mind, thrives in a constantly changing and evolving environment, and has at least three (3) years of relevant plumbing design experience. Someone with working knowledge of constructability and strong design fundamentals for plumbing installation methods. Experience with domestic water, sanitary, vent, stormwater systems, and/or CADD/Revit experience preferred. An excellent communicator who is able to read and interpret blueprints, submittals, specifications, and material matrix. Knowledge of plumbing system calculations, including water demand, sanitary loads, and storm drainage sizing, as well as experience in piping layout and coordination. Demonstrate and uphold all of Power Design's core values, which include integrity, accountability, teamwork, innovation, and growth. At Power Design, we are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy, national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information, military and veteran status, and any other characteristic protected by applicable law. Power Design believes that diversity and inclusion among our teammates is paramount to our success as a national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool nationwide

… The Electrical Quality Assurance Specialist at Power Design is an essential part of our Engineering and Virtual Design and Construction team. As a specialist, you will review electrical system designs of large-scale projects for code compliance and constructability issues. position details/responsibilities… With design direction, support and guidance from all team members, review drawings to ensure quality and constructability. Coordinate the best design solutions for electrical systems by applying industry knowledge and quality standards. Applying code knowledge to power and lighting systems. May include some telecom and fire alarm review. More advanced reviews may include photometric studies, short circuit analysis and voltage drop calculations. Power Design can assist with training in these areas. here's what we're looking for… A team player who thrives in a constantly changing and evolving environment with electrical design or electrical field experience. A quick learner interested in design fundamentals for electrical systems. Revit experience is a plus but not preferred. Electrical Journeyman License required. Bachelor's Degree in Engineering is a plus but not required. Professional Engineer License preferred but not required. Someone with working knowledge of electrical codes (such as IBC, IECC, NEC, ASHRAE) and electrical system calculations. Experience in visual photometric software (or similar) is preferred. An excellent communicator who is able to read and interpret blueprints, submittals and specifications. Demonstrate and uphold all of Power Design's core values, which include integrity, accountability, teamwork, innovation and growth. At Power Design, we are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy, national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information, military and veteran status, and any other characteristic protected by applicable law. Power Design believes that diversity and inclusion among our teammates is paramount to our success as a national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool nationwide

FHP Manufacturing, located in Fort Lauderdale, Florida, is a joint venture between Robert Bosch (BOSCH Group) and Carrier Corporation. FHP Manufacturing is a leader in the production of geothermal and water source heat pumps, providing some of the most efficient heating and cooling comfort solutions in the industry. Job Description As a Senior Product Quality Engineer, you will play a critical role in ensuring that our products meet the highest standards of quality, reliability, and compliance. Lead quality initiatives throughout the product lifecycle. Your expertise will help drive continuous improvement, reduce defects, and enhance customer satisfaction. Job responsibility: System Audit Process: Plan and conduct audits. Track corrective actions. Maintain QMM procedures and make sure instructions up to date. Reporting: Manage IDC (Internal defect cost) EDC (External defect cost) Control and report FFR (Field Failure Rate) and Isochrones Lead EWL (Early warning) reports and follow up countermeasures. ISO 9001 Certification Process: Promote QMM management system manual, policy, and objectives. Review concessions and participate in risk assessment. Promote QMS and support its continual improvement. Projects and Change Management Process: Team member for ECR projects. Review and approve sustaining ECR. Lead quality engineering activities for new and existing products, ensuring compliance with industry standards and customer requirements. Develop, implement, and maintain quality control processes, procedures, and metrics. Collaborate with cross-functional teams (R&D, Manufacturing, Supply Chain, and Customer Support) to identify, analyze, and resolve product quality issues. Drive continuous improvement initiatives using methodologies such as Six Sigma, Lean, or Kaizen. Utilize statistical tools and software to analyze quality data and generate actionable insights. Value Stream Support Process: Collaborate with value stream manager on conducting value stream Q-Basics assessments. Support product shipping holds. Support value stream with shipping holds or any other QMM related activities. Additional Responsibilities: Promoter for FMEA method. Support QMM team and other areas as necessary. Manage Supplier Quality communications from RMA Qualifications Bachelor's degree in Engineering, Quality Management, or a related field. Master's degree preferred. 5+ years of experience in product quality engineering Strong knowledge of quality systems, standards, and methodologies Proficiency in quality tools such as FMEA, Quality metrics, 8D, root cause analysis, and ISO. Excellent problem-solving, communication, and leadership skills. Ability to manage multiple projects and priorities in a fast-paced environment. Additional Information All your information will be kept confidential according to EEO guidelines. Equal Opportunity Employer, including disability / veterans.

Are you passionate about process optimization and industrial efficiency? Do you enjoy solving complex challenges that drive measurable results? Join our team as a Process Engineer and become a key player in shaping the performance of our state-of-the-art cement plant. This is your chance to make a real impact in a vital industry-improving systems, reducing costs, and contributing to a more sustainable future. Role & Responsibilities Responsibilities: Own and monitor the different production areas' daily performance metrics - drive productivity and ensure continuous alignment with operational goals. Identify and implement process improvements that reduce variable costs and increase energy efficiency. Lead or support continuous improvement initiatives with a data-driven approach (mass & heat balances, flow measurements, process audits, etc.). Conduct mini-audits across sub-systems (e.g., compressed air, false air) to uncover hidden inefficiencies. Support the planning and execution of plant performance strategies alongside the Production Manager and process team. Collaborate on short-term development projects, evaluating the process viability of new investments, methods, and technologies. Utilize and optimize expert control systems to fine-tune performance and stability. Track and report the effectiveness of implemented changes - especially new materials, equipment, or control strategies. Take ownership of other process-related challenges as assigned. Educational Requirements: You're a natural problem-solver with strong analytical skills and attention to detail. You enjoy digging into data, observing processes, and asking “how can we make this better?” You're comfortable balancing on-the-ground realities with long-term strategy. You communicate clearly, work well in teams, and thrive in a dynamic industrial environment. Benefits Recession Resistant Industry Consistent work, with a work/life balance Paid Holidays Paid Time Off 401(k) Plan w/ employer match contribution Medical / Dental / Vision plan offered Life Insurance - Company Paid Short-term / Long-term Disability Insurance - Company Paid Get Hired What to Expect During our Hiring Process Background Check Motor Vehicle Record Check 5-Panel Drug Screen Fit for Duty Baseline Physical (if applicable) A great team to support you throughout your career with Summit Materials companies! Build a Lasting Career with us. Begin Here. Go Anywhere. Apply now! Summit Materials consists of more than a dozen local companies that supply aggregates, cement, ready-mix concrete, asphalt paving, and construction services in the United States and western Canada. At Summit Materials, we support our teammates who lay the groundwork for our communities and live by our core values: Safety, Integrity, Sustainability, and Inclusivity. We're passionate about our teammates, our work, and our communities. Each of Summit's companies celebrates their individual legacies, but together - we are Summit Materials. At Summit Materials, we provide the foundation to connect our communities today and build a better tomorrow. We value all our communities - including our diverse internal community of teammates that make us stronger. No matter your race, ethnicity, gender, age, or anything that makes you who you are...you belong.

FHP Manufacturing, located in Fort Lauderdale, Florida, is a joint venture between Robert Bosch (BOSCH Group) and Carrier Corporation. FHP Manufacturing is a leader in the production of geothermal and water source heat pumps, providing some of the most efficient heating and cooling comfort solutions in the industry. Job Description First escalation point of contact for testing and programming operations: Leak Test, Final Run Test, Motor Programming, and Controller Programming Communicate efficiently with end of line test associates to provide them with quick support to guarantee daily production targets Support proper operation and maintenance of testing and programming equipment on all assembly and support lines Assure accessories used for testing operation are available for immediate replacement if necessary: Thermocouples, control cables, power plugs ... Troubleshoot failures of heat pumps and test equipment to locate root cause and provide resolution Report issues and findings using the FPY report. Drive improvements using basic problem-solving techniques Train or assist in training operators of run off stations to ensure tests are being properly performed, help to identify and resolve improvement opportunities and gaps with training Validate troubleshooting information shown by Testbuilder 3.0 after any failure occurs is accurate and update work instructions and sequence cards as needed Create and update work instructions to reflect current procedures in testing and validate improvement ideas with the test engineer Recognize deficiencies in the test process and find options for improvement together with test engineer. Other Workplace Considerations: Must be flexible - changing work shifts (days and / or hours) as required. Qualifications Bachelor's degree in Mechanical or Electrical engineering, or Computer Science 3+ years of manufacturing and/or engineering experience. 3+ years of experience working in a team environment. Additional Information Manufacturing/Engineering internship experience. Ability to use piping schematics, electrical wiring diagrams and work instructions to assure 100% unit compliance with quality standards and engineering design. Leadership / technical background - leading groups and delegating tasks. Effective problem-solving skills using proven problem-solving methods. Good written and oral communication skills. Strong project management / planning abilities. Good understanding of effective use of manufacturing personnel and equipment. Solid Project planning and project management skills. Ability to coordinate and manage multiple tasks simultaneously. Demonstrated experience in product launch and related quality requirements. Must have demonstrated a high level of teamwork, initiative, and involvement in previous work assignments. Demonstrates discipline and consistency regarding adherence to established standards, policies, and procedures. Ability to read and apply work instructions, follow directions, understand and execute safety and quality procedures. Must be able to speak, read and write English. All your information will be kept confidential according to EEO guidelines. Equal Opportunity Employer, including disability / veterans.

FHP Manufacturing, located in Fort Lauderdale, Florida, is a joint venture between Robert Bosch (BOSCH Group) and Carrier Corporation. FHP Manufacturing is a leader in the production of geothermal and water source heat pumps, providing some of the most efficient heating and cooling comfort solutions in the industry. Job Description First escalation point of contact for testing and programming operations: Leak Test, Final Run Test, Motor Programming, and Controller Programming Communicate efficiently with end of line test associates to provide them with quick support to guarantee daily production targets Support proper operation and maintenance of testing and programming equipment on all assembly and support lines Assure accessories used for testing operation are available for immediate replacement if necessary: Thermocouples, control cables, power plugs ... Troubleshoot failures of heat pumps and test equipment to locate root cause and provide resolution Report issues and findings using the FPY report. Drive improvements using basic problem-solving techniques Train or assist in training operators of run off stations to ensure tests are being properly performed, help to identify and resolve improvement opportunities and gaps with training Validate troubleshooting information shown by Testbuilder 3.0 after any failure occurs is accurate and update work instructions and sequence cards as needed Create and update work instructions to reflect current procedures in testing and validate improvement ideas with the test engineer Recognize deficiencies in the test process and find options for improvement together with test engineer. Other Workplace Considerations: Must be flexible - changing work shifts (days and / or hours) as required. Qualifications Bachelor's degree in Mechanical or Electrical engineering, or Computer Science 3+ years of manufacturing and/or engineering experience. 3+ years of experience working in a team environment. Additional Information Manufacturing/Engineering internship experience. Ability to use piping schematics, electrical wiring diagrams and work instructions to assure 100% unit compliance with quality standards and engineering design. Leadership / technical background - leading groups and delegating tasks. Effective problem-solving skills using proven problem-solving methods. Good written and oral communication skills. Strong project management / planning abilities. Good understanding of effective use of manufacturing personnel and equipment. Solid Project planning and project management skills. Ability to coordinate and manage multiple tasks simultaneously. Demonstrated experience in product launch and related quality requirements. Must have demonstrated a high level of teamwork, initiative, and involvement in previous work assignments. Demonstrates discipline and consistency regarding adherence to established standards, policies, and procedures. Ability to read and apply work instructions, follow directions, understand and execute safety and quality procedures. Must be able to speak, read and write English. All your information will be kept confidential according to EEO guidelines. Equal Opportunity Employer, including disability / veterans.

Are you passionate about process optimization and industrial efficiency? Do you enjoy solving complex challenges that drive measurable results? Join our team as a Process Engineer and become a key player in shaping the performance of our state-of-the-art cement plant. This is your chance to make a real impact in a vital industry-improving systems, reducing costs, and contributing to a more sustainable future. Role & Responsibilities Responsibilities: * Own and monitor the different production areas' daily performance metrics - drive productivity and ensure continuous alignment with operational goals. * Identify and implement process improvements that reduce variable costs and increase energy efficiency. * Lead or support continuous improvement initiatives with a data-driven approach (mass & heat balances, flow measurements, process audits, etc.). * Conduct mini-audits across sub-systems (e.g., compressed air, false air) to uncover hidden inefficiencies. * Support the planning and execution of plant performance strategies alongside the Production Manager and process team. * Collaborate on short-term development projects, evaluating the process viability of new investments, methods, and technologies. * Utilize and optimize expert control systems to fine-tune performance and stability. * Track and report the effectiveness of implemented changes - especially new materials, equipment, or control strategies. * Take ownership of other process-related challenges as assigned. Educational Requirements: * You're a natural problem-solver with strong analytical skills and attention to detail. * You enjoy digging into data, observing processes, and asking "how can we make this better?" * You're comfortable balancing on-the-ground realities with long-term strategy. * You communicate clearly, work well in teams, and thrive in a dynamic industrial environment. Benefits * Recession Resistant Industry * Consistent work, with a work/life balance * Paid Holidays * Paid Time Off * 401(k) Plan w/ employer match contribution * Medical / Dental / Vision plan offered * Life Insurance - Company Paid * Short-term / Long-term Disability Insurance - Company Paid Get Hired What to Expect During our Hiring Process * Background Check * Motor Vehicle Record Check * 5-Panel Drug Screen * Fit for Duty Baseline Physical (if applicable) * A great team to support you throughout your career with Summit Materials companies! Build a Lasting Career with us. Begin Here. Go Anywhere. Apply now! Summit Materials consists of more than a dozen local companies that supply aggregates, cement, ready-mix concrete, asphalt paving, and construction services in the United States and western Canada. At Summit Materials, we support our teammates who lay the groundwork for our communities and live by our core values: Safety, Integrity, Sustainability, and Inclusivity. We're passionate about our teammates, our work, and our communities. Each of Summit's companies celebrates their individual legacies, but together - we are Summit Materials. At Summit Materials, we provide the foundation to connect our communities today and build a better tomorrow. We value all our communities - including our diverse internal community of teammates that make us stronger. No matter your race, ethnicity, gender, age, or anything that makes you who you are...you belong. Req #: 1810