Quality Inspector jobs at Belcan - 614 jobs

RESPONSIBILITIES: Responsibilities may include some or all of the following: Maintain accurate and up-to-date acceptance and rejection records and/or certifications systems as required by the applicable specifications. Determine acceptance or rejection after inspection and/or calibration of parts, tools, instruments or x-ray film. Identify defective conditions and test failures and prepare all appropriate documentation and/or calibration history. INSPECTION Perform semi-complex inspection on detailed machined parts using a wide variety of measuring instruments to determine acceptability or rejections of parts and/or parts finish. Adapt and develop inspection set-ups to check sample parts, forgings and castings. Check tool and jig layouts. Perform first article and envelope inspection, source inspections, and/or semi-complex surface plate set-ups. Interpret specifications, charts, manuals and other data to arrive at acceptance or rejection. Use mathematics to convert blueprint dimension and tolerances. Work within the guidelines of drawings, schematics, blueprints, route sheets, travelers, quality directives, technical engineering specifications, customer's requirements and military standards. Layout and measure hole locations and centerlines on castings, forgings, and machine parts to maintain control of machining cycle during manufacture. Determine acceptance or rejection after inspecting parts, tools, instruments or x-ray film. Identify causes of defective conditions and test failures and prepare all appropriate documentation. Investigate cause of customer return failures. Perform inspections to applicable specifications within assembly, test and shipping departments. Assist customer/government source inspectors as necessary. CALIBRATION Perform calibration on various types of semi-complex measuring and test equipment. Set-up calibration test conditions interpreting calibration procedures, specifications, manufacturing instructions or related documents. Document and evaluate historical data to determine calibration intervals. Diagnose and calibrate newly acquired equipment. NONDESTRUCTIVE TEST Perform daily, weekly and monthly equipment and material checks. Perform pre-inspection and post-inspection cleaning. Set-up equipment and conduct tests of a semi-complex scope. Perform complete inspections in accordance with the applicable specifications, standards and other contractual documents. Interpret, evaluate and document inspection results in accordance with approved procedures. Observe all prescribed safety rules and regulations and maintain a FOD free work area. Perform other related responsibilities. Job Requirements: ⦁ Three years related inspection, calibration, or NDT experience or demonstrated ability to perform described responsibilities. ⦁ May be required to be certified as a Level II Nondestructive Test Inspector in two or more disciplines. ⦁ Certification must be in accordance with MIL-STD-410 and PES1-29. ⦁ Preferred experience of CMM operations, background in dimensioning and tolerancing per ANSI Y 14.5. ⦁ Knowledge of applicable military standards or specifications required. ⦁ Proficient in reading and interpreting blueprints, customer's specifications and internal drawings and procedures. Possess working knowledge of shop mathematics including trigonometry.

Who We Are and What We Do: Hi-Tek Manufacturing, Inc. is a cutting-edge facility specializing in the production of hot gas path (HGP) components and other aviation and power generation turbine engine parts. As a supplier to all major turbine engine original equipment manufacturers (OEMs), we are a full-service facility dedicated to the complete processing of unique alloy components. Since our establishment in 1980, our ongoing success has enabled us to expand and become one of the leading manufacturers in the turbine engine industry. We offer a comprehensive range of manufacturing services designed to meet the most stringent specifications and quality requirements. Precision is vital when machining for aircraft and gas turbine engines. At Hi-Tek, we have continuously enhanced our capabilities and broadened our operations to support our customers' evolving needs for over 40 years. Our extensive experience and expertise in machining processes, including Fast Hole, Wire and Sinker EDM, Laser Processing, and working with Super Alloys, are unmatched in the industry. We have not only consistently expanded our machinery, but we also employ the very best workers who are experts in their fields. QA Inspector- FPI Visit our website: **************** Fluorescent Penetrant Inspection (FPI) is a non-destructive testing method. It is used to detect surface defects in metallic and non-metallic components, including metal castings, forgings, and other machined parts used in industrial applications. The person selected is required to attend FPI Certification training in March of 2026 QA Inspector- FPI Reporting to the Manufacturing Supervisor, the QA FPI Inspector is responsible for following all policies and procedures associated with the various parts and equipment that they may be required to run. In addition, inspectors must load/unload parts, inspect parts using various precision measuring tools, accept or reject parts, and communicate any changes, both verbally and in writing. Analyze and interpret Op sheets, blueprints, mechanical drawings, and travelers to produce products that meet or exceed customer specifications. Verifies conformance of finished workpiece to customer specifications, using precision measuring tools and equipment as necessary, such as borescopes, rulers, calipers, gauges, or micrometers. (A MUST HAVE) Perform and document the scheduled FPI test log and reports Maintain, test, and replenish dipping solutions Clean parts using chemical degreaser and parts wash machine Prep parts using specialized material Inspect parts using ultraviolet light Report proper labor hours in the ERP system Maintain a safe and clean work environment by performing daily housekeeping duties Updates job knowledge by participating in educational opportunities and reading technical publications. Follow all Hi-Tek policies and procedures, including the use of proper PPE Accomplishes organization goals by accepting ownership for accomplishing new and different requests, exploring opportunities to add value to job accomplishment. Strong communication and interpersonal skills to maintain a working relationship with Quality and Engineering Dependability, integrity, cooperation, and taking the initiative for responsibilities and challenges are critical Ability to operate autonomously and self-direct Good and reliable attendance and a positive attitude are a must Any other duties needed to help drive our vision, fulfill our mission, and abide by our organization's values Education and Experience: Must meet the ITAR definition of §120.15 U.S. person High school diploma or GED required Must have at a minimum a Level I FPI certificate with the ability to obtain Level II FPI certification Experience in an industrial/manufacturing environment, aerospace industry preferred Experience with Repair and Overhaul FPI Inspection Experience with other NDT fields, i.e., X-Ray Troubleshooting/problem-solving skills Key Competencies: The ability to work efficiently with others or independently as required Integrity and conscientiousness in all work-related matters Safety conscious always Reliable attendance within acceptable standards of the attendance policy Must be able to follow verbal and written instructions in English Must be able to clearly communicate information to others verbally and in writing in English Physical Demand Levels: Specific vision abilities required by this job include close vision, color perception, depth perception, and the ability to adjust focus. 20/20 vision (natural or corrected) required with the ability to pass the annual vision test as required. Perform under AS9100 standards and NADCAP accreditation Lift, push, and/or pull up to thirty-five pounds regularly Operate overhead crane or other lifting equipment when necessary Stand at least 50% of the scheduled shift Walking or sitting as needed to perform job duties as assigned Routinely perform reaching, twisting, bending, and grasping to move and set tools, equipment, and materials QA Inspector- FPI Hi-Tek offers competitive wages and a full benefit package which includes medical, dental, vision, life insurance, short and long-term disability, 9 paid holidays per year, paid vacation time, 401K plan with company match, HSA & Flex Spending programs, supplemental health plans, and more! The safety and well-being of every employee are a top priority at Hi Tek Manufacturing. Our facility is exceptionally clean and temperature-controlled, equipped with multiple air-handling and filtration systems to maintain the highest quality environment possible. Each new employee receives comprehensive safety training and is provided with the appropriate personal protective equipment (PPE) for their specific tasks. Additionally, we conduct periodic training throughout the year to review the latest safety standards and federal, state, and local regulations, including the locations of Safety Data Sheets (SDS) and other safety initiatives. Hi Tek Manufacturing boasts the best time-loss accident record in the aerospace industry, reflecting our commitment to the philosophy that every employee deserves the right to return home injury-free daily. Shift: Monday through Friday from 3:30 p.m. to 12:00 a.m. This hourly position has a generous shift differential and a comprehensive benefits package to support your well-being and success! $21.00 - $25.00 per hr. Plus a 15% shift differential Hi-Tek is a drug-free workplace that conducts pre-employment, background, and random drug screenings. EEO Statement: Hi-Tek is an Equal Opportunity Employer (EOE) that values and respects the importance of a diverse and inclusive workforce. The company's policy is to recruit, hire, train, and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that diversity and inclusion are key drivers of our company's success. Compensation details: 21-25 Hourly Wage PIcfb72122f332-37***********0

QC Inspect I - Tulsa, OK . & Requirements: Previous Inspection experience is preferred, but not required. Education and Experience Requirements High School Diploma or GED required. 1 year quality inspection experience or 2 years GAC manufacturing experience required. 2 years manufacturing experience or equivalent aerospace experience preferred. Other Formal Inspection Training Program 90 Days required. Position Purpose: In a team oriented environment, perform all tasks in Initial Phase Manufacturing, Composites, Final Phase in a timely and efficient manner to ensure aircraft parts, sub-assemblies, major assemblies, and installations are built to type design data. Job Description Principle Duties and Responsibilities: Essential Functions: Perform inspection duties utilizing engineering drawings and orders, route cards, inspection travelers, work instructions, technical specifications, QA procedures and instructions, and other related documents. Perform preliminary and progressive inspections of aircraft structure and systems, verify functional operation, final inspections, inspect for FOD and verify paperwork. Witness, verify and document specified manufacturing process steps. Perform conformity/first article inspections to ensure compliance with FAA approved procedures. Ensure the proper use and storage of area tools and equipment. Conduct work in a manner that enhances own/other employees health and safety, product safety and promotes risk reduction; participate openly in safety-related event investigations, and immediately report workplace hazards and make suggestions for control; cooperate and contribute toward the overall success of the Safety program at the local level. Additional Functions: Provide technical support to manufacturing personnel. . Perform area inspections to ensure compliance with applicable standards and specifications. . Participate in continuous improvement activities. . Perform other duties as assigned Other Requirements: Working knowledge of shop mathematics, and CATIA or blueprint reading and interpretation. Competent in the use of basic shop tools and equipment. Aviation Personnel currently offers: .63 cents per mile up to $252.00 Travel Pay on your first check, Plus a $100.00 longevity Monthly bonus! Great benefits like: Holiday Pay, Vacation Pay, $250.00 referrals fees and FREE Direct Deposit. Cash Advances Available! Did you know Aviation Personnel GUARANTEES Highest pay package at every location we have openings? Please, give us a call @ 817-244-2125 We look forward to helping you find your next assignment; also please forward our information to your friends who might be interested as well.

Are you ready to be part of a team that values safety, continuous improvement, quality, and employee well-being? CHEP is looking for a motivated Quality Lead to join our team in Pendergrass, GA. **2nd shift hours are Monday through Thursday 6p-4:45a with shift differential incentive pay** Job Description Summary Oversee and manage quality control initiatives, ensuring compliance with corporate quality guidelines and driving continuous improvement efforts to optimize plant performance. Lead audits, training, and issue resolution activities to uphold quality standards and promote a culture of excellence within the plant. Act as a key liaison with internal and external stakeholders, addressing quality concerns and fostering strong relationships with customers and vendors. Key Responsibilities May Include: Conduct and validate quality audits across the plant, ensuring all processes align with corporate policies, goals, and quality objectives. Train and develop plant personnel on quality guidelines and best practices, promoting a continuous improvement mindset and fostering quality awareness across teams. Track and report key quality performance metrics, including Acceptable Quality Limits (AQL), Pest Control Program (PCP) compliance, and customer complaints. Investigate and resolve quality issues, including customer complaints and rejected loads, using root cause corrective actions (RCCA) and implementing preventive measures. Maintain and manage quality-related documentation, ensuring all records meet corporate and regulatory standards. Collaborate with regional quality teams and internal stakeholders to address plant-specific quality concerns and ensure consistency in quality management across locations. Lead continuous improvement projects targeting quality systems and processes, working with cross-functional teams to implement solutions that enhance operational performance. What we Offer: Competitive Pay w/ Shift Differential Benefits Day 1! 401K w/ company match (up to 4%) FREE company-paid vision, short-term disability, and life insurance!! FREE company-provided PPE and safety equipment Tuition reimbursement, parental leave, childcare assistance, profit sharing, and MORE! Base pay range is $25-$28 hourly. Salary ranges provided take into account a wide variety of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications, geographic differentials and other business and organizational needs. Therefore, actual amounts offered may be higher or lower than the range provided. If you have questions, please speak to your Talent Acquisition Partner about the flexibility and detail of our compensation philosophy. Dependent on the position offered, other forms of compensation may be part of a total offering beyond medical & retirement benefits and may include other monetary incentives or business benefits.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes (BCA) is looking for Flight Readiness Technician Inspectors (FRTI) to support the Flight Line Quality Family based out of North Charleston, South Carolina. As an FRTI supporting Boeing 787 Fleet, qualified candidates will verify and inspect routine final component installation, as well as support system operational functional validation testing. Flight Readiness Technicians Inspectors verify and inspect rework, modification, maintenance, preflight and post-flight checks for delivery, including, supporting troubleshooting pre and post-flight checks and verification of maintenance and modification actions for delivery of aircraft. Candidates must demonstrate a commitment to aircraft safety and quality while working in a flight line environment around live aircraft. Position Responsibilities: * Performs verification and inspection of flight component installation and operational functional testing of aircraft systems. * Inspects and verifies troubleshooting of pneumatic, hydraulic, electrical and avionics systems to isolate mechanical and/or faults and documents faulty components. * Conducts inspection of pre-flight and post-flight checks and performs inspections of maintenance and modification prior to delivery. * Supports documentation of identified problems during operation and testing of deliverable products. * Verifies the accuracy of work performed and may conduct * Assists in performing system & sub-system pre-delivery inspections and aircraft maintenance inspections in preparation for delivery. * Participates in determining details of assignments to accomplish a wide range of objectives. * Plans, schedules and arranges own activities with the assistance of lead. * Inspects, documents, and creates non-conformance records with minimal assistance. * Must maintain all necessary certifications to perform the job. * Exhibits Boeing Behaviors. Basic Qualifications (Required Skills/Experience): * Must be able to work any shift including days, nights and weekends. * 1+ years of Aerospace, Fabrication, or Manufacturing experience. * 1+ years of experience in quality inspection and/or auditing. * 1+ years of flight line operations experience. * 1+ years of experience using Microsoft Office tools (Word, Excel, PowerPoint). Preferred Qualifications (Desired Skills/Experience): * 3+ years of equivalent education and/or experience strongly preferred * FAA Airframe & Power Plant license or signed FAA Form 8610-2. * 787 Program Experience. * Foreign Object Debris (FOD) risk experience. * Team Leadership (Formal/Informal) experience. * Proficient in REDARS, PSDS, and BAC specifications. * Proficient in all forms of NCR (Non-Conformance Record) and EPD (Emergent Process Document) generation (NC/NCR/RGEN/PU/SAT/SRR/PU or RGEN Revision etc.). Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria are met as outlined in our policies. This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing. Shift Work Statement: This position is for variable shift. Variable shift means you will be placed on a shift at the time of hire based on business needs at that time. You will remain on that shift until re-evaluation of the need. Total Rewards: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. summary pay range (level B): $66,000 - $78,000 summary pay range (level C): $75,600-$79,800 Applications for this position will be accepted until Feb. 03, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. Read more Shows the full job description for sighted users Apply Now Save JobRemove Job

Altom Transport is currently seeking an HM183 Cargo Tank Inspector to fill a first-shift position at our Chicago terminal. This role also includes responsibilities as a lead trailer mechanic. Our full-service maintenance facility is designed to work on our private fleet. Take the next step in your career and join our family. Visit altomtransport.com and apply today. Feel free to reach out directly to us with any questions! This position operates out of our Indianapolis terminal. Compensation: Full compensation package: $75,000 - $100,000 based on location and experience Requirements A self-starter that works as a team member under the direction of management Ability to prioritize work and follow through with repairs Must be creative, dedicated, and take responsibility for repair work Verifiable mechanical experience and own hand tools are required General maintenance and repair experience Liquid tanker experience HM183 experience Pre-Employment Drug Screen and Background Check is required Benefits Complete benefits package includes: Full Family Health Insurance - Prescription Card, Dental, Vision 401K Retirement Plan/Company Match Profit-Sharing Paid Vacation & Holidays Boot Allowance Quarterly Tool Bonus Quarterly shop and safety bonuses Glove program Company-paid Training

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airlines is excited to offer opportunities for an Inspector Electrical & Electronic Sub Assembly to join our Quality team in Everett and Renton, Washington. As an Inspector for Electrical & Electronic Sub Assembly, you will be an integral part of our commitment to delivering top-notch quality in aerospace manufacturing. This exciting role places you at the intersection of technology and precision, where your keen eye for detail will ensure that every component meets the highest standards of safety and performance. You will engage with advanced inspection techniques and collaborate with a talented team to identify and resolve potential issues before they impact production. Please note that certification for visual acuity and color perception may be required for this position. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Communicate with shop personnel or check the Call Sheet for the next job or in-process inspection, obtaining applicable drawings and specifications. Ensure that the correct revisions of drawings and documents are being used, verifying that all paperwork and online systems are complete and accurate. Perform inspections and in-process inspections as required, including crimping, splicing, torque, bond, and ground checks. Conduct various tests and measurements, such as resistance tests, to ensure that wires meet specification requirements. Monitor manufacturing processes and document findings as required to ensure compliance with quality standards. Inspect electrical wire bundles and assemblies, ensuring all parts have been assembled according to drawings and specifications. Screen paperwork for options, substitutions, and effectiveness of parts and materials. Identify, investigate, and document discrepancies, reporting them to the shop as necessary. Reject wire bundles, assemblies, or installations as required, documenting discrepancies and processing Quality Assurance records. Indicate Quality Assurance acceptance on appropriate paperwork and online systems, processing documentation as required. Coordinate and complete travelers, investigating and clearing check orders as necessary. Initiate Inspection Record Change Requests (IRCR) and/or Shipside Action Trackers (SAT) as needed. Ensure that certifications for tools, test equipment, and personnel are current and compliant. Assist other employees by providing information and answering questions regarding functions, methods, and procedures. Perform first article inspections and FAA conformities, coordinating results as required. Enter data into various computing software systems, such as Common Manufacturing Execution System (CMES) and Enterprise Process Evaluation Systems (EPES). Collaborate with Engineering, Quality, and Manufacturing to evaluate and improve build processes and defect reduction initiatives. Initiate and document any nonconforming materials or assemblies according to specifications and procedures. Perform audits and surveillance of manufacturing and quality assurance processes to ensure compliance with standards. Witness or perform electrical continuity, voltage, resistance, capacitance, and bond or ground testing as required. Calibrate and certify electrical process tools, such as loggers, strippers, and crimpers. Refer to rejection tags and trouble reports to identify problems and initiate corrective actions. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Basic Qualifications: 2+ years of experience as a Quality Inspector 1+ years of experience using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators 1+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design) Experience working with Microsoft Office (Excel, Word, PowerPoint) Preferred Qualifications: Electrical experience Typical Education & Experience: High school graduate or GED preferred. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This position is for a variety of shifts At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement Applications for this position will be accepted until Apr. 24, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Fabrication B to join our Quality team in Puget Sound, Washington. Join our dedicated team as an Inspector Fabrication, where your keen eye for detail will be essential in ensuring the integrity of our fabricated parts and assemblies. In this critical role, you will perform thorough inspections of materials and components. Collaborating closely with Engineering, Quality, and Manufacturing, you will play a key role in evaluating and improving build processes while investigating and resolving defect-related issues. Your expertise in using precision measuring instruments will enable you to assess dimensions and workmanship accurately, while your ability to document nonconforming items will help maintain high standards of production. With a focus on continuous improvement, you will conduct audits and in-process inspections, ensuring compliance with all specifications. If you are passionate about maintaining excellence in fabrication and thrive in a fast-paced environment, we invite you to contribute to our mission of delivering top-quality products. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Perform inspections of fabricated detail parts, materials, and assemblies for workmanship, alignment, fit, and conformance to blueprints and specifications. Inspect fabricated and machined parts, subassemblies, and tooling to ensure compliance with engineering specifications and quality standards. Collaborate with Engineering, Quality, and Manufacturing to evaluate and improve build processes and defect reduction methods. Investigate and resolve defect-related problems, initiating and implementing project plans for quality improvement. Document any nonconforming materials, hardware, tools, or assemblies according to established specifications and procedures. Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance with specifications. Verify part numbers, serial numbers, and quantities against required paperwork upon receipt of parts and assemblies. Ensure all paperwork, including drawings and specifications, is complete, accurate, and up-to-date. Select and set up appropriate measuring instruments to check dimensions and workmanship of parts and assemblies. Inspect dimensions and workmanship, including visual weld inspections, according to drawings and specifications. Identify, document, and reject nonconforming parts/assemblies, noting discrepancies and required corrections. Perform re-inspections and initiate Re-inspection Requests (R/R) as needed, communicating with relevant inspection groups. Conduct in-process inspections, audits, and monitor heat treat processes, documenting required information. Verify certifications of tools, equipment, and personnel to ensure they are current and compliant. Handle and dispose of hazardous materials in accordance with safety regulations and contact supervisors for assistance when needed. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Basic Qualifications: 3+ years of experience as a Quality Inspector. 3+ years of experience reading and understanding engineering drawings, blueprints, and specifications. 3+ years of Experience using software applications for internet navigation, email, Microsoft Suite and/or other specialized computer applications. 1+ years of experience in metal or composite fabrication in aerospace. Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel. Preferred Qualifications: Experience in Foreign Object Debris (FOD) risk 1+ years of experience inspecting aircraft/aerospace parts, components, and/or assemblies for conformance with applicable drawings, specifications, quality standards, and manufacturing plans. Typical Education & Experience: High school graduate or GED preferred. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Feb. 27, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Altom Transport is currently seeking an HM183 Cargo Tank Inspector to fill a first-shift position at our Chicago terminal. This role also includes responsibilities as a lead trailer mechanic. Our full-service maintenance facility is designed to work on our private fleet. Take the next step in your career and join our family. Visit altomtransport.com and apply today. Feel free to reach out directly to us with any questions! Compensation: Full compensation package: $75,000 - $100,000 based on location and experience Requirements A self-starter that works as a team member under the direction of management Ability to prioritize work and follow through with repairs Must be creative, dedicated, and take responsibility for repair work Verifiable mechanical experience and own hand tools are required General maintenance and repair experience Liquid tanker experience HM183 experience Pre-Employment Drug Screen and Background Check is required Benefits Complete benefits package includes: Full Family Health Insurance - Prescription Card, Dental, Vision 401K Retirement Plan/Company Match Profit-Sharing Paid Vacation & Holidays Boot Allowance Quarterly Tool Bonus Quarterly shop and safety bonuses Glove program Company-paid Training

Will perform a variety of FPI and x-ray operations and inspections, read, interpret and understand appropriate drawings, procedures and instructions and operate all required radiography equipment. Will also perform routine maintenance on radiography and FPI equipment as needed. Will train level 1 technicians and work with the level 3 technicians to improve processes and reduce waste in the value stream. RESPONSIBILITIES: * Assist in scheduling workload of X-ray and FPI operations. * Perform cycle counts to improve efficiencies in the department. * Work with floor supervisors to help establish production routines. * Insure that travelers, routings and TMD's are being complied with throughout the department. * Operate X-ray machines and FPI booths as required. * Read and understand part drawings and specifications associated with NDT. * Learn/perform basic computer operations. * Work closely with the engineering group and weld and braze specialists. * Develop and approve X-Ray techniques for various new weld and braze designs. * Provide training to facility level I and II technicians. * Perform other duties as requested QUALIFICATIONS: High School diploma or equivalent. * Good interpersonal skills and willingness to work effectively as a participative team member. * May be required to lift up to 50 lbs. * Utilize good verbal and written communication skills. * Accurately perform basic mathematical calculations. * Have at least 2 years" experience as a Level II in Radiography and FPI.

Altom Transport is currently seeking an HM183 Cargo Tank Inspector to fill a first-shift position at our Chicago terminal. This role also includes responsibilities as a lead trailer mechanic. Our full-service maintenance facility is designed to work on our private fleet. Take the next step in your career and join our family. Visit altomtransport.com and apply today. Feel free to reach out directly to us with any questions! This position operates out of our Chicago/Joliet terminal. Compensation: Full compensation package: $75,000 - $100,000 based on location and experience Requirements A self-starter that works as a team member under the direction of management Ability to prioritize work and follow through with repairs Must be creative, dedicated, and take responsibility for repair work Verifiable mechanical experience and own hand tools are required General maintenance and repair experience Liquid tanker experience HM183 experience Pre-Employment Drug Screen and Background Check is required Benefits Complete benefits package includes: Full Family Health Insurance - Prescription Card, Dental, Vision 401K Retirement Plan/Company Match Profit-Sharing Paid Vacation & Holidays Boot Allowance Quarterly Tool Bonus Quarterly shop and safety bonuses Glove program Company-paid Training

The Panther Group is seeking a Quality Inspector to support inspection activities throughout the production assembly process, from in-process inspection through final system assembly. This role is open to both entry-level and experienced candidates, with training provided for those new to quality inspection. 1st shift (for Quality Inspector 1) Mon-Fri, 6am-2:30pm. 2nd shift (for Quality Inspector 2) Mon-Fri, 2:30pm-10:30pm. or 3:30pm - midnight. Essential Duties & Responsibilities Perform in-process, first article, and final inspections throughout manufacturing Verify products meet workmanship, process, documentation, and customer requirements Follow ESD and board handling requirements Handle Moisture Sensitive Devices (MSD) per component MSL requirements Review documentation for compliance with internal procedures Disposition assemblies for rework or repair as needed Authorize shipment of product that meets industry and customer specifications Use inspection tools such as calipers, rulers, microscopes, and gauges Support ISO Quality Management Systems and site 6S objectives Accurately record inspection results in the electronic manufacturing system Support one or multiple product lines based on experience level Perform other related duties as assigned Qualifications Required: High School Diploma or GED Pass IPC-DVD-64C Component Identification. Pass IPC-A-610 Modules, 1, 2, 3, 4, 5, 6, 7 & 8. Ability to read assembly drawings, blueprints, and Bills of Materials Familiarity with First Piece, In-Process, Audit, and Final Inspection Knowledge of ESD and electronic assembly environments Ability to use Inspection Gauge (Calipers, Rulers, Microscope, etc.) Ability to use electronic manufacturing system (OCuity) Ability to use Microsoft Office tools like Excel and Word as well as shop floor control systems (Aegis). Ability to work in a team-oriented manufacturing environment Strong attention to detail and sense of urgency Comfortable performing repetitive inspection tasks Ability to follow written procedures and instructions Preferred (training may be provided): IPC-A-610 and IPC-DVD-64C certifications Experience Levels Entry-Level: 0-6 months manufacturing or inspection experience Experienced: 2+ years of quality inspection or related technical experience Technical or vocational certification may substitute for experience Pay is $20 - $28 / hour depending on experience and shift. #INDENG #ZR

Summary Description: AeroTEC's AC & Test Site Ops Department provides operational and facility requirements to support Fabrication, Aircraft Maintenance, Quality, Flight Test Instrumentation Installation & removal, and site safety (EH&S/SMS). The AC & Test Site Ops Division is responsible for providing resources and facilities for aircraft maintenance, quality, manufacturing, instrumentation installation and equipment to support customer requirements The Quality inspector is responsible for carrying out physical inspections on the Flight Test Aircraft as well as signing the release for flight. This role requires the significant exercise of independent discretion and judgment in matters of significance. Job Duties and Responsibilities (Essential Functions): Carry out physical inspections on Flight Test Aircraft to identify damage or defects and to assess airworthiness and conformance to standards. Sign the release for flight form on aircrafts that pass Quality Inspection. Analyze information and evaluate results to choose the best solution and solve problems. Observe and certify conformity with system tests. Carry out daily audits related to shop floor practices or specific Quality System elements. Prepare and audit Aircraft documentation such as Technical logs. Administer non-conformance reports and snag reports. Conduct Authority audits with QA organization as needed. Perform Nondestructive testing (NDT) as needed. Participate in promoting and developing the AeroTEC Quality Culture. Complete special projects and miscellaneous tasks as assigned by manager. Qualifications Knowledge/Skills/Abilities: Strong knowledge in FAA regulations, Aviation Rules (FOD's, Safety, Quality, hazardous materials, Aircraft Marshalling), aerodynamics, aircraft electrical systems, materials science, aircraft maintenance, electrical testing, instrumentation, gas turbine and piston power plants. Good leadership (individual contributor) presence: Able to lead by example and live/work by company values. Ability to successfully contribute to a positive and productive work environment. Able to instill a sense of urgency in team members. Able to be patient and objective in difficult situations with different types of people. Good customer service tool box: Professional mannerisms, appearance and actions (self-confident and committed to high ethics). Strong follow-through, quick thinking and resourceful. Ability to remain calm, cool and collected in stressful situations. Strong sense of urgency to address and solve important issues. Good organizational, time management and prioritization skills: Able to multi-task, maintain focus on several different projects at one time and hit deadlines. Able to be flexible with attention and priority. Ability to work in a progressive, fast-paced environment (work well under pressure). Good analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions. Good communication skills (oral, written) with customers. Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently. Good interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization. Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner who ensures that goals are met. Able to set priorities and keep to projected schedules. Computer Skills: Comfortable and effective working in Microsoft Office, including Word, Excel, Outlook, and PowerPoint. Level Requirements (Minimum): Education College degree or equivalent experience. A&P License required. NDT Certification preferred. Experience 10+ years' experience in Aircraft release as a Quality Inspector in Experimental Flight Testing, maintenance, or pre-flight. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: While performing the duties of this job, the employee is regularly required to talk and/or hear. The employee is frequently required to sit, stand; walk; use hands to finger, handle or feel; and reach with hands and arms. Must have the ability to sit or stand for long periods of time. The employee is occasionally required to climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. No travel required. This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, Lawful Permanent Resident, Refugee, or Asylee. AeroTEC is an equal opportunity employer.

Will be responsible for the inspection of production and prototype hardware using predetermined methods, operations, setups, and prescribed specifications to perform in-process and final inspections of machined parts. Cross training will be required in multiple inspection areas. Primary Responsibilities: * Perform inspections in accordance with technical documentation * Inform supervisor or management when concerns with quality issues arise * Assist the Supervisor/Manager, as needed, with various audits and compliance projects * Perform miscellaneous duties and projects as assigned and required. * Adhere to AS9100 and other quality standards * Cross train in other inspection areas Requirements: * Ability to work in a team environment that promotes high morale, teamwork, pride, productivity and excellent quality * Demonstrated ability to effectively perform assigned tasks and interpret results of inspection * Knowledge of precision measuring equipment (micrometers, dial calipers, etc.) * Ability to meet critical deadlines and work in fast paced environment * High school diploma, GED or equivalent- documentation required * Must meet ITAR definition of US Person(s)- documentation required * Strong math background * Ability to process and communicate information using Microsoft Office software * Participate in cross-training efforts interacting with other departments to acquire additional skills and knowledge * Must be able to follow verbal and written instructions in English * Must be able to communicate information to others verbally and in writing in English * 20/25 vision (natural or corrected) required * Must be able to work independently with minimal supervision * Must be able to perform overtime when necessary, including weekends when required * Perform miscellaneous duties and projects as assigned and required * MTI is a safety sensitive manufacturer. As such, successful results of pre-employment drug testing will be required. Preferable Experience: * 1-3 years of previous manufacturing experience * Ability to interpret geometric dimensions and tolerances * Prior experience with visual, airflow, and dimensional inspections of aerospace / gas turbine components a plus * Experience working in a Quality System certified to ISO9001, AS9100, or Nadcap a plus Physical Demands/Work Environment: While performing the duties of this job, the employee is regularly required to stand, use hands, reach with hands and arms, move throughout the facility, and communicate. Work in office environment and use of computer (typical 2-button scroll mouse and keyboard - 75% of the work day). The employee must frequently lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. The noise level in the work environment may be loud. Must be able to use required Personal Protective Equipment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work in a supportive team environment that is fast paced with a strong commitment to accountability. This posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required in this job. To apply, submit resume noting job inquiry ID #3201781225 to the Human Resources Department by email at: ********************************. An Equal Employment Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, genetics, or protected veteran status and will not be discriminated against on the basis of disability. Will remain posted until filled.

Will be responsible for the inspection of production and prototype hardware using predetermined methods, operations, setups, and prescribed specifications to perform in-process and final inspections of machined parts. Cross training will be required in multiple inspection areas. Primary Responsibilities: * Perform inspections in accordance with technical documentation * Inform supervisor or management when concerns with quality issues arise * Assist the Supervisor/Manager, as needed, with various audits and compliance projects * Perform miscellaneous duties and projects as assigned and required. * Adhere to AS9100 and other quality standards * Cross train in other inspection areas Requirements: * Ability to work in a team environment that promotes high morale, teamwork, pride, productivity and excellent quality * Demonstrated ability to effectively perform assigned tasks and interpret results of inspection * Knowledge of precision measuring equipment (micrometers, dial calipers, etc.) * Ability to meet critical deadlines and work in fast paced environment * High school diploma, GED or equivalent- documentation required * Must meet ITAR definition of US Person(s)- documentation required * Strong math background * Ability to process and communicate information using Microsoft Office software * Participate in cross-training efforts interacting with other departments to acquire additional skills and knowledge * Must be able to follow verbal and written instructions in English * Must be able to communicate information to others verbally and in writing in English * 20/25 vision (natural or corrected) required * Must be able to work independently with minimal supervision * Must be able to perform overtime when necessary, including weekends when required * Perform miscellaneous duties and projects as assigned and required * Ongoing FAA testing and training required * MTI is a safety sensitive manufacturer. As such, successful results of pre-employment FAA drug testing will be required. Preferable Experience: * 1-3 years of previous manufacturing experience * Ability to interpret geometric dimensions and tolerances * Prior experience with visual, airflow, and dimensional inspections of aerospace / gas turbine components a plus * Experience working in a Quality System certified to ISO9001, AS9100, or Nadcap a plus Physical Demands/Work Environment: While performing the duties of this job, the employee is regularly required to stand, use hands, reach with hands and arms, move throughout the facility, and communicate. Work in office environment and use of computer (typical 2-button scroll mouse and keyboard - 75% of the work day). The employee must frequently lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. The noise level in the work environment may be loud. Must be able to use required Personal Protective Equipment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work in a supportive team environment that is fast paced with a strong commitment to accountability. This posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required in this job. To apply, submit resume noting job inquiry ID #3201771125 to the Human Resources Department by email at: ********************************. An Equal Employment Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, genetics, or protected veteran status and will not be discriminated against on the basis of disability. Will remain posted until filled.

Quality Inspector (Full-Time) - Build Something Bigger in Central Missouri! Pay: $17/hr+ Schedule: Monday-Thursday Time: 6:00am-4:30pm Are you someone who likes to see the results of a hard day's work? Do you take pride in being part of a team that makes things happen - and makes them well? We're looking for a sharp, reliable Quality Assistant to join our manufacturing team right here in Fulton, MO. This is more than just a job - it's your chance to be part of something solid, something real, and something that keeps America moving. Whether you're helping assemble components, organizing materials, or keeping the floor running smoothly, your role matters. Big time. ? What You'll Be Doing: Supporting the production team with hands-on assistance on the manufacturing floor Prepping materials, managing supplies, and ensuring everything's ready for a smooth workflow Inspecting parts, packaging products, and assisting with quality control Helping keep workstations clean, safe, and organized - safety is a team effort! Pitching in wherever needed - because you're the kind of person who gets things DONE ? What We're Looking For: A dependable, detail-oriented team player with a strong work ethic Ability to lift, move, and stay active throughout the shift - this job keeps you moving! Someone who takes direction well but isn't afraid to show initiative Previous factory or production experience is a plus, but we're ready to train the right person Why work for Advance Services, Inc. Advance Services is for and about people; we are your employment specialists. Enjoy our easy application process. You NEVER pay a fee! Weekly pay. Fun Safety and attendance incentives. Health Benefits to keep you and your family healthy. PTO so you have time for you. Great Referral Incentives. Advance Services partners with the top companies in the area! Apply for this job by clicking the apply now button! Please select the Columbia, MO branch or call our office at ************** Stop in and see our experienced friendly staff at 1900 Providence Rd. Ste 202. Columbia, MO 65202 Advance Services is an equal opportunity employer EOE

Build an Aviation Career You're Proud Of Your work ties us all together, helping our team's function and operate. Experience opportunities to learn and be a part of an organization that has your back. And with competitive compensation and total rewards, you'll also enjoy our great perks. Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency. What you'll do: Ensures the functional and acceptable status of the non-destructive test equipment in accordance with the appropriate company process. Determines the acceptance of parts and components for surface condition in preparation for the non-destructive test process. Performs the specific non-destructive test process as identified in the shop order work instruction. Processes the part(s) in accordance with the appropriate company process. Inspects and interprets the test results. Responsible for reporting on the status and performance of the NDT function to the NDT Manager as applicable. Exercises leadership on NDT related topics, including improvements and Continuous Improvement (CI) projects. Marks all unacceptable discontinuities for location and dimension. Provides technical support to NDT Inspectors Documents the completion and test results of non-destructive test process. Ensures parts are cleaned following completion of NDT process and in acceptable condition for further processing. Performs equipment and material maintenance checks in accordance with the appropriate company process. Maintains records of all maintenance performed on the non-destructive test equipment and materials. Provides instruction and training to NDT inspectors in inspection methods and practices to provide consistent application of best practices. Leads the development and monitoring of NDT related training plans including continual and re-current training Liaisons with engineering, inspection and other personnel as required to assist in researching and solving non-destructive test process problems. Acts as a mentor to NDT personnel and works closely with the Training and Development Specialist where necessary. Maintains personal qualifications as stated in the appropriate company process. Moves between production assignments that utilize multiple skills endorsements as needed to support production requirements. Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions. As required, may be assigned to perform selected duties of the NDT Inspector to meet operational goals. Carries out other duties as assigned. Position Requirements: Strong planning, organizational, leadership, interpersonal, decision making, oral and written communication skills. Minimum level III in one NDT method Knowledgeable in and understanding of inherent and non-inherent discontinuities found in materials. Knowledgeable in the Workplace Health & Safety requirements. Maintain internal non-destructive test process approval. Ability to read, understand and interpret blueprints Proficient in technical writing. Excellent decision-making skills to ensure compliance to all customer, regulatory and company requirements. Ability to lift up to 50 pounds (unassisted) for approximately 25% of the average work day. Regularly required to sit and stand for prolonged periods. Working knowledge of production management computer system and other related internal control systems. Currently authorized to work in the Unites States without sponsorship.

Are you looking to join a dynamic team that provides its people with the tools to be successfull and opportunities to grow? Universal Logistics is a leading provider of customized transportation and logistics solutions, offering a comprehensive suite of services including transportation, value-added, intermodal, and specialized services utilized throughout entire supply chains. Universal has immediate career opportunities in your area. Apply today to become part of the Universal team! Summary: The Lead Gate Inspector is responsible for efficiently and accurately coordinating the movement of trucks and containers in and out of the facility while inspecting trailers, chassis, and containers for damage. This role requires excellent communication skills, attention to detail, and the ability to work in a fast-paced environment. Benefits: • Medical (3 plan options) • Dental & Vision • 401(k) • Paid Weekly • Paid Time Off (After probationary period) • Amazing Opportunity for Growth! Key Responsibilities: Gate Operations: - Greet and direct incoming and outgoing trucks, verifying necessary documentation and ensuring compliance with terminal rules and regulations. - Accurately record and update truck and container information in the terminal's computer system. - Issue gate passes, permits, and other required documentation to authorized personnel. - Coordinate with security personnel to ensure the safety and security of the terminal premises. Documentation and Recordkeeping: - Collect and review shipping documents, such as bills of lading, delivery orders, and customs paperwork, to ensure accuracy and completeness. - Enter data from shipping documents into the terminal's computer system accurately and efficiently. - Maintain organized and up-to-date records of truck and container movements, permits, and other relevant documentation. - Generate reports on gate activities, truck turn times, and any other requested metrics. Communication and Coordination: - Communicate effectively with truck drivers, customers, and other terminal personnel to facilitate smooth and efficient operations. - Coordinate with yard personnel to ensure the availability and proper placement of containers for loading and unloading. - Collaborate with customer service representatives to address customer inquiries, resolve issues, and provide timely updates. - Assist in coordinating with external stakeholders, including rail carriers, trucking companies, and regulatory authorities. Safety and Compliance: - Enforce safety protocols and regulations within the gate area, ensuring compliance by all personnel and visitors. - Monitor and report any security concerns, damages, or safety hazards to the appropriate personnel. - Stay updated on industry regulations and best practices related to intermodal rail terminal operations. - Assist in conducting safety and security training for terminal staff and contractors, as required. Customer Service: - Provide exceptional customer service to truck drivers, ensuring a positive experience during their interactions with the terminal. - Address and resolve customer concerns or complaints promptly and professionally. - Assist customers in locating containers and providing necessary information or assistance. Qualifications and Skills: - High school diploma or equivalent. - Valid Driver's license - Previous experience as a gate clerk or in a similar role within the intermodal rail or logistics industry is preferred. - Excellent communication and interpersonal skills. - Strong attention to detail and accuracy in data entry and recordkeeping. - Ability to multitask and prioritize tasks effectively in a fast-paced environment. - Proficiency in using computer systems and data entry software. - Basic knowledge of transportation and logistics operations. - Familiarity with relevant safety and security regulations. - Ability to work independently as well as in a team environment.

Reporting to the Waterjet Quality Manager, the Waterjet Inspector will be responsible for inspecting aerospace / gas turbine engine components for compliance with engineering drawings, customer requirements and company specifications. Accountable to approve items within specifications and recommend disposition of items not meeting standards. Will adhere to all quality standards. Requirements: * Must be able to use standard gauges (micrometers, height gauges, calipers etc.) * Must have a strong math background * Must have HS Diploma or equivalent- documentation required * Must meet ITAR definition of US Person(s)- documentation required * Demonstrated ability to effectively perform assigned tasks and interpret results of inspections * Must be able to interpret geometric dimensions and tolerances * Ability to meet critical deadlines and work in fast paced environment * Basic to Intermediate proficiency in MS Office software * Participate in cross-training efforts interacting with other departments to acquire additional skills and knowledge * Must be able to follow verbal and written instructions in English * Must be able to communicate information clearly verbally and in writing in English * 20/25 vision (natural or corrected) required * Must be able to work independently with minimal supervision * Must be able to perform overtime when necessary, including weekends * Must be willing to work a swing shift, if required * Ongoing FAA Testing and Training Mandatory * MTI is a safety sensitive manufacturer. As such, successful results of FAA drug testing will be required. Preferable Experience: Prior experience with visual, airflow, and dimensional inspections of aerospace / gas turbine components Physical Demands/Work Environment: While performing the duties of this job, the employee is regularly required to stand, use hands, reach with hands and arms, move throughout the facility, and communicate. Work in office environment and use of computer (typical 2-button scroll mouse and keyboard - 25% of the work day). The employee must frequently lift or move up to 35 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. The noise level in the work environment may be loud. Must be able to use required Personal Protective Equipment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work in a supportive team environment that is fast paced with a strong commitment to accountability. This posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required in this job. To apply, please submit your resume noting job inquiry #4151301125WJ to the Human Resources Department at: ********************************. An Equal Employment Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, genetics, or protected veteran status and will not be discriminated against on the basis of disability. Will remain posted until filled.