Material Handler jobs at BlueScope Steel

Warehouse Associate KBS is looking for motivated, high-energy Warehouse Associates (Corrugate Recycler) to join our team for immediate full-time, permanent positions. These positions are primarily responsible for meeting customer needs and exceeding customer expectations in the pick-up and removal of Corrugate Gondolas throughout the facility. APPLY TODAY! Kellermeyer Bergensons Services (KBS) is the largest privately held provider of facility services in North America, servicing over 2 billion square feet of space daily. We help industry leaders across a wide range of key verticals-including retail, industrial and logistics, healthcare, education, manufacturing, and more-maintain clean, efficient, and welcoming spaces that support their operations. As we continue to grow, we're looking for team members who are dedicated, reliable, and ready to contribute to a culture built on respect, opportunity, and pride in service. Work Schedule: Days/nights vary, including weekends Shifts Available: 6am-5pm 6pm-5am Our Warehouse Associate (Corrugate Recycler) position performs the following duties within designated work areas, as assigned at the beginning of each shift: Utilize a manual pallet jack to pick up full gondolas (large trash boxes/bins) and replace them with empty gondolas within assigned areas Transport and place full corrugate gondolas into the baler or compactors located in a designated area in the warehouse (training will be provided) Ensure the areas around all gondolas are free of debris and trash Dust, mop, and sweep around trash receptacle areas to keep traffic areas free of trash and debris Must keep traffic areas (“Green Mile” walking areas) free of debris at all times to ensure safety for all Maintain and sort in Auger/Baler/Compactor areas for tidiness Other janitorial duties may be assigned as needed Requirements for our Warehouse Associate / Corrugate Recycler Positions: Ability to use a manual pallet jack to lift and move gondolas up to 75+ lbs. Ability to lift, push, pull and carry objects weighing up to 50 pounds Regular bending, lifting, stretching, and reaching both below the waist and above the head Able to push and pull manual pallet jacks loaded with trash/cardboard consistently Walking in and around the facility with great frequency throughout the entire shift Must be able to stand and walk for up to 10-12 hours Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, and safe handling for chemicals sheets/documents (generally in English; may have in Spanish where state required) Background Check and Drug Test Required KBS utilizes the KBSPresence mobile timekeeping software for accurate recording of employee work hours, attendance management, completion of required training, and distribution of important employment-related information. All non-exempt employees are required to download and use the KBSPresence app on their personal mobile devices to clock in and out for their shifts and breaks. In accordance with applicable local laws, cell phone reimbursement is provided to support the use of personal devices for work-related tasks. What's In It for You? As a full-time KBS employee (30+ hours per week) you qualify for benefits including medical, prescription drugs, dental, vision and more! Affordable Limited Medical Insurance (Coterie) which includes virtual access to US board-certified physicians who can consult, diagnose, and prescribe medications via interactive audio or video. Life Insurance Supplemental Health Insurance (E.G., Accident) 401k plan with a match Paid and Unpaid Time Off Quick Pay - voluntary benefit offered to both full-time and part-time KBS employees who are paid hourly via direct deposit. Quick Pay provides a way for employees to access a portion of their pay prior to the upcoming scheduled pay day. Pet Insurance PerkSpot Discount Program - discounts on travel, gyms, cell phones, restaurants, auto, apparel & electronics Progressive Pay is available at select site locations, though it is not offered at every location. Employees will receive a $.50 increase after the first 90 days, and another $.30 increase after completing 180 days. Check today if this is available to you. KBS considers all applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, gender identity, and expression, marital or military status, or based on an individual's status in any group or class protected by applicable federal, state, or local law. KBS also provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act and applicable state and local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Gainesville Employment Status: Hourly Full-Time Function: Distribution/Logistics Pay Range: ($33,639.00 - $50,458.00) Target Bonus: % Req ID: 27040 Job Responsibilities Summary of the Position Responsible for pulling and boxing orders in accordance with customer specifications. Picks up, transports, and places finished product in proper warehouse holding area, recording location for later update in SAP system. Key Deliverables Correctly pulled/boxed customer orders Accurate and properly located physical inventory Accurately following customer specific requirements Work environment cleanliness and organization Job Requirements Summary of the Position Responsible for pulling and boxing orders in accordance with customer specifications. Picks up, transports, and places finished product in proper warehouse holding area, recording location for later update in SAP system. Key Deliverables Correctly pulled/boxed customer orders Accurate and properly located physical inventory Accurately following customer specific requirements Work environment cleanliness and organization Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Warehouse Janitorial Associate Kellermeyer Bergensons Services (KBS) has immediate full-time, permanent openings to join our Warehouse Janitorial Associate/Cleaning Crew Member. If you enjoy working in a fast-paced environment and helping make an impact on safety in the workplace, then this is the job for you! What are you waiting for, APPLY TODAY and join the KBS Crew! Discover What the Job's All About Want to know what to expect in this role? This quick video breaks it down for you, core duties, must-have skills, and what a typical day looks like. Take a minute to watch and see if it's the right job for you! Job Preview Video-English Job Preview Video-Spanish Kellermeyer Bergensons Services (KBS) is the largest privately held provider of facility services in North America, servicing over 2 billion square feet of space daily. We help industry leaders across a wide range of key verticals-including retail, industrial and logistics, healthcare, education, manufacturing, and more-maintain clean, efficient, and welcoming spaces that support their operations. As we continue to grow, we're looking for team members who are dedicated, reliable, and ready to contribute to a culture built on respect, opportunity, and pride in service. Work Schedule: Days/nights vary, including weekends Shifts Available: Sunday - Wednesday 5am - 4pm or 7am - 6pm Wednesday - Saturday 5am - 4pm or 7am - 6pm Sunday - Wednesday 5pm - 4am or 7pm - 6am Wednesday - Saturday 5pm - 4am or 7pm - 6am Starting Pay: $15 per hour Our Warehouse Cleaning/Janitorial positions perform the following duties within designated work areas, as assigned at the beginning of each shift: Cleaning restrooms, break areas (indoor/outdoor), office areas Sweeping, mopping, dusting, removing trash Ensure all walkways are clean and tidy at all times Clean totes and other items Some deep cleaning, as needed Follow all safety and quality standards Other basic janitorial duties as assigned Requirements for our Warehouse Cleaning/Janitorial Positions: Ability to lift and move totes up to 49 pounds Walking in and around the facility with great frequency throughout the entire shift Must be able to stand and walk for up to 10-12 hours Background Check and Drug Test Required Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, and safe handling for chemicals sheets/documents (generally in English; may have in Spanish where state required) Dexterity in eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation) KBS utilizes the KBSPresence mobile timekeeping software for accurate recording of employee work hours, attendance management, completion of required training, and distribution of important employment-related information. All non-exempt employees are required to download and use the KBSPresence app on their personal mobile devices to clock in and out for their shifts and breaks. In accordance with applicable local laws, cell phone reimbursement is provided to support the use of personal devices for work-related tasks. What's In It for You? As a full-time KBS employee (30+ hours per week) you qualify for benefits including medical, prescription drugs, dental, vision and more! Affordable Limited Medical Insurance (Coterie) which includes virtual access to US board-certified physicians who can consult, diagnose, and prescribe medications via interactive audio or video. Life Insurance Supplemental Health Insurance (E.G., Accident) 401k plan with a match Paid and Unpaid Time Off Quick Pay - voluntary benefit offered to both full-time and part-time KBS employees who are paid hourly via direct deposit. Quick Pay provides a way for employees to access a portion of their pay prior to the upcoming scheduled pay day. Pet Insurance PerkSpot Discount Program - discounts on travel, gyms, cell phones, restaurants, auto, apparel & electronics Progressive Pay is available at select site locations, though it is not offered at every location. Employees will receive a $.50 increase after the first 90 days, and another $.30 increase after completing 180 days. Check today if this is available to you. KBS considers all applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, gender identity, and expression, marital or military status, or based on an individual's status in any group or class protected by applicable federal, state, or local law. KBS also provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act and applicable state and local law.

Do you want to work for a company where the people are the purpose? At Grimco, our Warehouse Associates aren't just part of a team - they're a vital part of our operations, driving the efficiency and precision that exceeds our industry-leading standards. It's our warehouse associates and their ideas that foster innovation running through everything we do. Joining our warehouse team provides you with the opportunity to play a crucial role in supporting our groundbreaking work, ensuring seamless operations that fuel our company's success. Job Description Pick and pack orders of signs & sign supplies in preparation for shipping to customers. Load and unload delivery trucks by hand as well as a forklift. Ship and receive orders, utilizing RF scanners & Warehouse Management System (WMS). Maintain clear and accurate records on all inventory. Accurately measure and cut custom size product pieces for customers using panel saw and/or roll slitter. Examine workplace conditions daily to ensure they conform to applicable OSHA standards and Grimco's Warehouse Safety Checklist. Assist couriers and delivery drivers' load vehicle, verify load for accuracy, and work to maximize delivery efficiency. Maintain equipment, trucks, and warehouse (e.g., cleaning/sweeping warehouse, maintenance, special projects). Qualifications 1+ years of warehouse experience Knowledge of WMS, printing ticket orders, MS Office Suite, email, internet navigation. Ability to compete and pass a criminal background screening. Physical Demands Requires the ability to lift, push, pull and carry tools and warehouse materials weighing 70+ pounds on a frequent basis. Requires prolonged standing or walking, frequent bending, stooping, and reaching daily. Requires the ability to climb ladders to pick or put away products. Requires a full range of physical motion to operate manual and electrically powered tools and machines (i.e., forklift). Benefits Full medical, dental, and vision benefits available. Premiums have remained unchanged for more than 17 years. Paid Maternity/Paternity Leave Paid Holidays Paid Time Off Accrual (Paid Time Off payout available) 401K with Profit Sharing, up to 6% of the employee's total compensation earnings. Eligible for Employee Recognition Prizes Employee Referral Benefits Volunteer Time Off Additional Information Grimco is a national wholesale sign supply manufacturer and distributor with over 50 locations across North America. We focus on distributing quality products and providing excellent service to the sign industry. Our offering of sign supplies includes traffic signs, blanks, substrates, boards, digital print media, wrap films, sign vinyl, application tape, banner material and supplies, sign frames, banner stands, LEDs and electrical accessories, grand format solvent/UV/latex printers, inks, software and more. By completing this online application for employment, you certify that the information on this application is true and complete to the best of your knowledge. You understand that any misrepresentation or omission of fact in response to any inquiry made in this application may result in rejection of application or, if hired, dismissal whenever it is discovered. You authorize and release all parties from any liability or damage that may result from seeking, furnishing, or using such information. You understand and agree that, if hired, your employment is for no definite period and may, regardless of the date of payment of compensation, be terminated by Grimco, Inc. at any time, for any or no reason, with or without notice. You understand that no representation to the contrary is valid unless in writing, set a definite term of employment, and signed by the company's CEO. You further understand and agree that any job offer is contingent upon your passing, to the company's satisfaction, a drug and/or alcohol test, criminal background check and other possible screenings. You understand that this application is active for 90 days only, and if you do not hear from the company but still wish to be considered for employment after 90 days, you will need to fill out a new application.

Do you want to work for a company where the people are the purpose? At Grimco, our Warehouse Associates aren't just part of a team - they're a vital part of our operations, driving the efficiency and precision that exceeds our industry-leading standards. It's our warehouse associates and their ideas that foster innovation running through everything we do. Joining our warehouse team provides you with the opportunity to play a crucial role in supporting our groundbreaking work, ensuring seamless operations that fuel our company's success. Job Description Pick and pack orders of signs & sign supplies in preparation for shipping to customers. Load and unload delivery trucks by hand as well as a forklift. Ship and receive orders, utilizing RF scanners & Warehouse Management System (WMS). Maintain clear and accurate records on all inventory. Accurately measure and cut custom size product pieces for customers using panel saw and/or roll slitter. Examine workplace conditions daily to ensure they conform to applicable OSHA standards and Grimco's Warehouse Safety Checklist. Assist couriers and delivery drivers' load vehicle, verify load for accuracy, and work to maximize delivery efficiency. Maintain equipment, trucks, and warehouse (e.g., cleaning/sweeping warehouse, maintenance, special projects). Qualifications 1+ years of warehouse experience Knowledge of WMS, printing ticket orders, MS Office Suite, email, internet navigation. Ability to compete and pass a criminal background screening. Physical Demands Requires the ability to lift, push, pull and carry tools and warehouse materials weighing 70+ pounds on a frequent basis. Requires prolonged standing or walking, frequent bending, stooping, and reaching daily. Requires the ability to climb ladders to pick or put away products. Requires a full range of physical motion to operate manual and electrically powered tools and machines (i.e., forklift). Benefits Full medical, dental, and vision benefits available. Premiums have remained unchanged for more than 17 years. Paid Maternity/Paternity Leave Paid Holidays Paid Time Off Accrual (Paid Time Off payout available) 401K with Profit Sharing, up to 6% of the employee's total compensation earnings. Eligible for Employee Recognition Prizes Employee Referral Benefits Volunteer Time Off Additional Information Grimco is a national wholesale sign supply manufacturer and distributor with over 50 locations across North America. We focus on distributing quality products and providing excellent service to the sign industry. Our offering of sign supplies includes traffic signs, blanks, substrates, boards, digital print media, wrap films, sign vinyl, application tape, banner material and supplies, sign frames, banner stands, LEDs and electrical accessories, grand format solvent/UV/latex printers, inks, software and more. By completing this online application for employment, you certify that the information on this application is true and complete to the best of your knowledge. You understand that any misrepresentation or omission of fact in response to any inquiry made in this application may result in rejection of application or, if hired, dismissal whenever it is discovered. You authorize and release all parties from any liability or damage that may result from seeking, furnishing, or using such information. You understand and agree that, if hired, your employment is for no definite period and may, regardless of the date of payment of compensation, be terminated by Grimco, Inc. at any time, for any or no reason, with or without notice. You understand that no representation to the contrary is valid unless in writing, set a definite term of employment, and signed by the company's CEO. You further understand and agree that any job offer is contingent upon your passing, to the company's satisfaction, a drug and/or alcohol test, criminal background check and other possible screenings. You understand that this application is active for 90 days only, and if you do not hear from the company but still wish to be considered for employment after 90 days, you will need to fill out a new application.

Now Hiring: Warehouse Associate - Receiver Power up your career. Drive your future. Are you ready to put your Warehouse skills to work in a place where every move matters? Join a team that values hustle, precision, and people who get the job done right - and rewards them for it. Shift Details - Monday-Friday schedule - Start time: 5AM - 8-12 hour shifts depending on workload - Mandatory overtime - when things get busy, we roll up our sleeves and get it done (and get paid for it!) Pay - $ - Overtime available and paid at time-and-a-half Responsibilities: - Load, unload, and organize inventory with speed and accuracy - Keep the warehouse flowing - from receiving to shipping - ️ Operate forklifts and warehouse equipment - Maintain a clean, safe, and efficient work area - Be part of a team that works hard, moves fast, and has each other's backs Qualifications: - 1+ year of Warehouse or Production experience - ️ Ability to lift up to 75 lbs and stay active throughout your shift - A strong work ethic and a sharp eye for detail - A safety-first mindset and a team-player attitude - Flexibility to work overtime when needed What We Offer Our benefits package includes coverage of your health, wealth, and wellness for you and your eligible spouse/dependents. We offer a competitive salary and benefits package, including a 401k with company match and generous paid time off to help you balance your life. Below is a list of benefits you will enjoy while working with our company. - Three comprehensive Medical plan options Prescription Dental Vision - Company Paid Life Insurance - Voluntary Life Insurance - Supplemental Hospital Indemnity, Critical Illness, and Accident Insurance - Company-paid Short-Term Disability - Company-paid Long-Term Disability - Paid time off (PTO) and paid Holidays - 401k retirement plan with company match - Employee Assistance Program - Teladoc - Legal Insurance - Identity Theft Protection - Pet Insurance - Team Member Discount Program - Tuition Reimbursement - Yearly Wellness Clinic MITER Brands, also known as MI Windows and Doors, Milgard and PGT Industries are an equal-opportunity employer. The company does not discriminate based on religion, race, creed, color, national origin, sex, age, disability, handicap, veteran status, sexual orientation, genetic information, or any other applicable legally protected category.

Provide support for daily branch operations, i.e. make deliveries, pull orders, and put away stock. Supervisor Branch Manager Essential Job Functions 1. Have and maintain a valid driver's license 2. Make deliveries to and pick-ups from customers, other branches/warehouses, and vendors/suppliers 3. Pull orders for customers 4. Load and unload shipments/deliveries using proper equipment 5. Perform pre-trip and post-trip vehicle inspections and maintenance functions according to DOT regulations. 6. Comply with all federal, state and company requirements pertaining to motor vehicle laws and accident reporting. 7. Keep up daily trip logs, pre and post inspection reports, monthly fuel reports 8. Prepare product for shipment via UPS, FedEx and common carrier 9. Receive shipments from UPS, FedEx and common carrier 10. Handle and process paperwork on damaged product. 11. Prepare Returns and Reclaims for shipment including appropriate paperwork 12. Break down and put away stock using proper equipment 13. Greet customers promptly and courteously by name (if known) 14. Answer telephones promptly and courteously identifying yourself and the company 15. Regular and punctual attendance Other Job Functions 1. Assist at counter as needed 2. Assist in maintaining a clean and safe work environment inside and out; i.e., empty trash, sweep floors, clean bathroom(s), etc. 3. Perform related jobs as required Skills and Physical Abilities 1. Meet the following physical requirements All DOT medical and drug-free requirements Ability to carry at least 75 pounds Lift boxes up to 3.6 cubic feet/105 lbs (4-5 hours daily) Sit in, get into/out of vehicle cab (2-3 hours daily) Steer and drive vehicle (also shift a standard transmission) (as required) Ability to climb ladders 2. Ability to use computer system as pertains to the job 3. Ability to get along with customers and other employees, follow directions and work under pressure Equipment 1. Forklift Education/Knowledge 1. Geography of the area Licenses Required 1. Commercial Driver's License (CDL) with hazmat endorsement Work Environment 1. Overtime required during off-season and mandatory during season and inventory 2. Heated store area 3. Unheated warehouse area 4. Concrete floors

Job DescriptionJob Title: Forklift Operator - Shipping (2nd Shift) Location: Kings Mountain, NC Schedule: Monday - Friday, 2:30 PM - 10:30 PM Overtime: Saturday and Sunday as needed Pay Rate: $17.00/hour Job SummaryThe Forklift Operator - Shipping is responsible for safely and efficiently moving finished goods and materials throughout the shipping and warehouse areas. This role supports outbound operations by loading, staging, and transporting product while maintaining accuracy, safety, and productivity standards.Key Responsibilities Operate forklift equipment to move, stage, and load finished goods for shipment Load and unload trailers according to shipping schedules and documentation Transport pallets and materials to designated shipping and storage areas Verify product counts, labels, and pallet condition prior to shipment Assist with wrapping, banding, and securing pallets for transport Follow all shipping documentation, work instructions, and scanning procedures Maintain accurate inventory movement through proper handling and scanning Perform daily forklift inspections and report equipment issues promptly Maintain a clean, organized, and safe work environment Follow all company safety policies and OSHA regulations Perform additional warehouse or shipping duties as assigned by supervision Qualifications Previous forklift operating experience required Valid forklift certification preferred (or ability to obtain) Experience in shipping or warehouse environments a plus Ability to follow written and verbal instructions Strong attention to detail and safety awareness Physical Requirements Ability to stand and operate equipment for extended periods Ability to lift up to 50 lbs as needed Frequent bending, twisting, and reaching Ability to work in a fast-paced warehouse environment

Job Description2nd Shift Stock Receiving Handler Monday-Friday/Saturday and Sunday are as needed $18/hr'2:30pm-10:30pmThis primary function of this position is to receive, unload and verify materials and supplies delivered to the facility and transport to the staging area. At start of shift check work orders, materials and supplies available for the scheduled work. Dock lock trailers and manually place dock plate on trailers as required. Unload trailers of incoming materials and supplies with a forklift, walkie-rider or pallet jack. Unload trailers of floor loaded cases by hand (10-30 lbs/ up to 3000 cases) onto pallets as instructed. Perform count check of incoming items and verify against the bill of laden. Perform damage control checks on items received and contact supervisor about removing items according to company policy. Arrange pallets and cases of stock items and transport to the staging area with a forklift, walkie-rider or pallet jack as needed. Re-stack items on pallets, inspect packaging and secure as needed. Re-load of trailers with pallets according to work order specification and shipping schedule. Complete all related paperwork. Change forklift/pallet jack batteries with battery changing equipment. Perform general housekeeping duties regarding tools and equipment and in work area as needed. At the end of shift secure all equipment and complete all necessary paperwork Perform additional job duties as assigned by your supervisor/manager Review work instructions and schedule with the supervisor. • Obtain supplies required to perform the job and prepare for operations. • Put on all required Personal Protective Equipment and Safety Gear. • Perform daily safety check on equipment to insure devices are functioning properly. For immediate consideration, call ************

Job Description1st Shift Stock Receiving Handler $17/hr Monday- Friday and Saturday as needed 630am-230pm This primary function of this position is to receive, unload and verify materials and supplies delivered to the facility and transport to the staging area. Essential Functions At start of shift check work orders, materials and supplies available for the scheduled work. • Dock lock trailers and manually place dock plate on trailers as required. Unload trailers of incoming materials and supplies with a forklift, walkie-rider or pallet jack. ??Unload trailers of floor loaded cases by hand (10-30 lbs/ up to 3000 cases) onto pallets as instructed ??Perform count check of incoming items and verify against the bill of laden. ??Perform damage control checks on items received and contact supervisor about removing items according to company policy.?Arrange pallets and cases of stock items and transport to the staging area with a forklift, walkie-rider or pallet jack as needed.?Re-stack items on pallets, inspect packaging and secure as needed. ??Re-load of trailers with pallets according to work order specification and shipping schedule. ??Complete all related paperwork.?Change forklift/pallet jack batteries with battery changing equipment.?Perform general housekeeping duties regarding tools and equipment and in work area as needed.?At the end of shift secure all equipment and complete all necessary paperwork?Perform additional job duties as assigned by your supervisor/manager Set-Up for Daily Operations ??- Review work instructions and schedule with the supervisor. ??Obtain supplies required to perform the job and prepare for operations. ??Put on all required Personal Protective Equipment and Safety Gear. ??Perform daily safety check on equipment to insure devices are functioning properly. Must read, write, and communicate in English as it relates to the job and to the safety regulations Must be able to learn to use the equipment required to complete tasks Must be able to perform all functions of the job safely Must complete company new hire and safety orientation Must be able to stand entire shift Must be able to lift up to 40 lbs Must be able to operate a pallet jack For immediate consideration, please call ************

Job Description1st Shift Stock Receiving Handler $17/hr Monday- Friday and Saturday as needed 630am-230pm This primary function of this position is to receive, unload and verify materials and supplies delivered to the facility and transport to the staging area. Essential Functions At start of shift check work orders, materials and supplies available for the scheduled work. • Dock lock trailers and manually place dock plate on trailers as required. Unload trailers of incoming materials and supplies with a forklift, walkie-rider or pallet jack. ??Unload trailers of floor loaded cases by hand (10-30 lbs/ up to 3000 cases) onto pallets as instructed ??Perform count check of incoming items and verify against the bill of laden. ??Perform damage control checks on items received and contact supervisor about removing items according to company policy.?Arrange pallets and cases of stock items and transport to the staging area with a forklift, walkie-rider or pallet jack as needed.?Re-stack items on pallets, inspect packaging and secure as needed. ??Re-load of trailers with pallets according to work order specification and shipping schedule. ??Complete all related paperwork.?Change forklift/pallet jack batteries with battery changing equipment.?Perform general housekeeping duties regarding tools and equipment and in work area as needed.?At the end of shift secure all equipment and complete all necessary paperwork?Perform additional job duties as assigned by your supervisor/manager Set-Up for Daily Operations ??- Review work instructions and schedule with the supervisor. ??Obtain supplies required to perform the job and prepare for operations. ??Put on all required Personal Protective Equipment and Safety Gear. ??Perform daily safety check on equipment to insure devices are functioning properly. Must read, write, and communicate in English as it relates to the job and to the safety regulations Must be able to learn to use the equipment required to complete tasks Must be able to perform all functions of the job safely Must complete company new hire and safety orientation Must be able to stand entire shift Must be able to lift up to 40 lbs Must be able to operate a pallet jack For immediate consideration, please call ************

Imagine Everything. Build the Future with Hexion. At Hexion, we push boundaries, rethink possibilities, and create real impact. We activate science to deliver progress-developing breakthrough solutions that strengthen industries, protect communities, and drive a more sustainable future. This is where bold thinkers, problem-solvers, and innovators come together to shape what's next. Whether you're engineering advanced materials, transforming manufacturing technologies, or leading strategic innovation, your ideas and actions leave a lasting mark. We cultivate an inclusive culture of growth, collaboration, and accountability, ensuring every contribution propels us forward. We don't follow the status quo-we challenge it, disrupt it, and improve it. Every role at Hexion is part of something bigger. We invest in innovation, sustainability, and continuous development-equipping you with the tools, training, and opportunities to excel. With an unwavering commitment to safety, partnership, belonging, and impact, we empower you to lead change and strengthen industries worldwide. Your Future Starts Here. If you're ready to push limits, reimagine what's possible, and create the extraordinary, Hexion is where you belong. Anything is possible when you imagine everything. Position Overview Execute safe, reliable, and efficient operation of the shipping department at the Sheboygan site. The operator must safely load and ship bulk outbound material into tank trucks, totes and drums, receive and transport to storage inbound material from both internal and external customers. This includes relocation of trailers around the plant using a capacity spotter. The shipper must also clean their work are and make minor repairs or adjustments. Schedule: 8-hour shifts, including Overtime as required to include days/nights/weekends Job Responsibilities EH&S * Proactively seek to identify and eliminate hazards in the workplace. * Understand and ensure safety standards are met. * Participate in safety training and audits. * Always maintain working area in clean and safe conditions. * Issue and monitor Safe Work, Hot Work, and Confined Space Permits for maintenance and contractors. Quality * Ensure lab safety practices adhered to. * Perform analytical testing of in-process samples and finished products. * Support troubleshooting of lab equipment, as needed. * Perform final QC inspections on all shipments. * Complete Certificate of Analysis documents * Participate in safety and quality incident investigations. Production * Responsible for day-to-day operation of loading, packaging and shipping. * Movement of empty and full trailers around site using yard trucks. * Maintain certification to the shipping department operating manual. * Load product into trucks and unload raw materials. * Receive raw materials in SAP. * Follow shipping schedule in SAP, print BOL's, pick and post goods issue. * Create, maintain and confirm production orders for packaged goods. * Create, maintain and complete process orders for formaldehyde blends. * Fill drums, totes and pails and prepare for shipment. * Perform other duties as needed. Minimum Qualifications * 2 years' work experience - industrial environment preferred * Strong communication skills and ability to perform mathematical operations quickly and accurately. * Troubleshooting skills and mechanical aptitude. * Ability to use a computer effectively with knowledge of Microsoft Office suite of applications. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, manufacturer's literature, diagrams, or schematics. * Safety focus in prior jobs Aptitudes: Must possess the ability to understand the meaning of words and their ideas, as well as instructions and their underlying principles. Perform some arithmetic operations, possess eye-hand motor coordination and be able to operate a forklift. Temperament: Must have the ability to accept responsibility, perform duties under stress, adapt to situations requiring preciseness and adapt to changing duties and responsibilities. Must be able to adapt to situations involving the interpretation of feelings, ideas, or facts; be able to influence people in the opinions, attitudes or judgments; and be able to generalize, evaluate, make decisions and perform repetitive work. Education High School Diploma GED Physical Requirements * Frequent standing/walking * Frequent sitting * Frequent lifting up to 55 lbs * Frequently pushing/pulling * Frequently working from heights, including stairs, and climbing ladders. * Constantly use far visual acuity * Constantly use near visual acuity * Constantly use fine manipulation * Constantly use gross manipulation * Frequently wear full and half face respirators. * Ability to enter confined spaces frequently Other We are an Equal Opportunity, Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to gender, pregnancy, race, national origin, religion, age, sexual orientation, gender identity, veteran or military status, status as a qualified individual with a disability or any other characteristic protected by law. To be considered for this position candidates are required to submit an application for employment through our career site and, be at least 18 years of age. Any offer of employment will be conditioned upon successful completion of a drug test and background investigation, as well as authorization for the Company to conduct additional periodic background checks as required by the Chemical Facility Anti-Terrorism Standards (CFATS) or regulations adopted by the department of Homeland Security or other regulatory agencies. A prior criminal record is not an automatic bar to employment, and the Company will conduct an individualized assessment and reassessment, consistent with applicable law, prior to making any final employment decision.

At Ensign-Bickford Aerospace & Defense Company (EBAD), we believe that our strengths are built on our most important resource - our people. Join EBAD and you'll be a part of a team who creates cutting edge technology that will blast us into the future. No other company can match the innovative energetic solutions that we provide. At EBAD you will actively contribute to successful missions putting men, women and satellites into space, and protecting our armed service men and women around the world. If this is the culture and work environment you are seeking, then EBAD is the place for you! Job Description EBAD is looking for a Material Control Clerk based in our Moorpark, CA office. This position reports to our Supervisor, Material Control. Full-time or Temporary candidates are welcome to apply. RESPONSIBILITIES Stores and/or issues production materials Maintain inventory accuracy and record keeping using ERP System Responsible for cycle counting Work within a team structure to achieve Company and department goals Keep work area neat and clean and follow all established safety guidelines May support receiving duties. Perform additional duties related to specific area assignments SKILLS AND DUTIES High school diploma or GED required. Must meet ITAR & BATFE requirements. Minimum one year related experience. Experience in receiving a plus. DOT/IATA Certification preferred Forklift Certification preferred Basic computer skills, some knowledge of components in stock is preferred. Must be able to work independently with minimal supervision Must be able to read and understand industry standards Must be able to effectively communicate and interact with all levels of management and customers (internal and external) Meticulous with a high attention to detail Stores parts in designated areas Issues & kits material from stockroom in accordance with company procedures. May physically transport materials to and from work areas. Able to lift and carry 25 pounds Completes necessary paperwork to assure accurate inventory records. Performs physical inventory counts. Maintains minimum quantities of designated Production Line Supplies. Monitors and maintains minimum quantities of shelf-life sensitive items. Prepares production build packages Compensation: Pay Range: $25 - $29 per hour. Pay is determined by the applicants education, experience, knowledge, skills, abilities, internal equity, and alignment with market data. Ensign-Bickford Aerospace & Defense Company is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to race, religion, color, sex, age, disability, sexual orientation, genetic information, national origin, or veteran status.

This opportunity is located within our Ensign-Bickford Aerospace & Defense Company business, a global leader of mission-critical hardware and systems solutions including precision energetics systems and innovative explosive solutions.Click here to learn more. Job Description EBAD is looking for a Material Control Clerk based in our Moorpark, CA office. This position reports to our Supervisor, Material Control. Full-time or Temporary candidates are welcome to apply. RESPONSIBILITIES Stores and/or issues production materials Maintain inventory accuracy and record keeping using ERP System Responsible for cycle counting Work within a team structure to achieve Company and department goals Keep work area neat and clean and follow all established safety guidelines May support receiving duties. Perform additional duties related to specific area assignments SKILLS AND DUTIES High school diploma or GED required. Must meet ITAR & BATFE requirements. Minimum one year related experience. Experience in receiving a plus. DOT/IATA Certification preferred Forklift Certification preferred Basic computer skills, some knowledge of components in stock is preferred. Must be able to work independently with minimal supervision Must be able to read and understand industry standards Must be able to effectively communicate and interact with all levels of management and customers (internal and external) Meticulous with a high attention to detail Stores parts in designated areas Issues & kits material from stockroom in accordance with company procedures. May physically transport materials to and from work areas. Able to lift and carry 25 pounds Completes necessary paperwork to assure accurate inventory records. Performs physical inventory counts. Maintains minimum quantities of designated Production Line Supplies. Monitors and maintains minimum quantities of shelf-life sensitive items. Prepares production build packages Compensation: Pay Range: $25 - $29 per hour. Pay is determined by the applicants education, experience, knowledge, skills, abilities, internal equity, and alignment with market data. Ensign-Bickford Aerospace & Defense Company is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to race, religion, color, sex, age, disability, sexual orientation, genetic information, national origin, or veteran status.

Performs functions directed towards successfully and efficiently meeting shipping goals for customer orders by performing all required shipping and receiving functions. Benefits: Medical Insurance Prescription Drug Plan Dental/Vision Insurance Employee Incentive Plan Flexible Spending Account Cash Accumulation Plan-401K Life/AD&D Insurance Short- Term/Long-Term Disability Vacation Plan Paid Holidays Employee Assistance Program Adoption Assistance Program Tuition Reimbursement Maternity/Paternity Leave Pet Insurance Essential Functions: Operates fork lift to load and unload vehicles. Must insure all products are properly coded. Must pull orders and assist in warehouse placement of stock. Must assist in inventory and cycle counts Must be able to complete all required logs, complete shipping and receiving paperwork, and Perform monthly inventory without assistance. Assist Set-up in pulling ingredients or loading blending platforms, when there are no other duties that must be done Must fill in for supervisor Must have knowledge of finished goods and raw material storage areas Must have complete understanding of shipping and receiving department including paperwork This person will operate as a self starter, and be able to multi-task Qualifications: High School Diploma or GED equivalent. Minimum of 2 years warehouse experience within a food manufacturing environment. Ability to comfortably operate standard warehouse equipment, including proficient operation of stand up forklift and load move system. Work Environment: The job is performed in the production area where the person will be exposed to strong aromas, airborne dust particles emanating from ingredients being used, and will be in the presence of or otherwise operating machinery. Disclaimer: The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. New Weds Foods is an Equal Opportunity Employer. Newly Weds Foods will only employ those who are legally authorized to work in the United States without assistance or support from Newly Weds Foods. Any offer of employment is conditional upon the successful completion of a background investigation and drug screen.

Responsibilities * Strategic aspects of the role * Reports into * Day to day tasks Qualifications * Educational requirements * Years of work experience * Travel requirements Our Vision: As one team, we enable the safety and prosperity of the world. Our Mission: We partner with our Customers to TRIUMPH over their hardest aerospace, defense, and industrial challenges to deliver value to our stakeholders. Our Values: * Integrity - Do the right thing for our stakeholders. We value safety, diversity, and respect. * Teamwork - Win as One team-one company. Solicit help and assist others. * Continuous Improvement - Pursue zero defect quality. Attack problems and relentlessly raise the bar. * Innovation - Passion for growing the business. Lead through ingenuity and entrepreneurship. * Act with Velocity - Partner, anticipate and communicate. Proactively solve problems. Code of Conduct: To perform the job successfully, an individual should demonstrate the TRIUMPH behaviors captured within our core values: Integrity, Teamwork, Continuous Improvement, Innovation, and Act with Velocity. Detailed definitions are below and performance metrics for each behavior can be found on our intranet and is embedded within our Performance Management processes. All employees are expected to represent the values and maintain the standards contained in TRIUMPH's Code of Conduct. Environmental, Health, and Safety (EHS): Employees are responsible for the Health, Safety, and Welfare of themselves, the environment, and other people. All employees must comply with EHS policy training and instructions, help to maintain a safe and clean working environment, and use any Personal Protective Equipment (PPE) provided by the Company. Employees must report any accidents, incidents, and near misses to management. Additionally, employees are expected to notify management of any dangerous or potentially dangerous situations or practices. Additional Information: Triumph is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability. SELECT US positions require access to technology, materials, software or hardware that is controlled by US export laws including the International Traffic in Arms Regulations ("ITAR") and the Export administration Regulations ("EAR"). In order to be eligible for applicable positions, you must be a US Person under ITAR or eligible for approval for a U.S. Government export license. A US Person is a US Citizen, Lawful Permanent Resident, refugee or asylee. All inquires related to citizenship are asked solely to comply with ITAR and EAR export licensing requirements. U.S. applicants must be legally authorized to work in the United States without company sponsorship. Please contact us if you require assistance in applying for TRIUMPH and we will provide reasonable accommodations via *****************************. Nearest Major Market: Indianapolis

SMC, Ltd. is a globally recognized premium supplier to the medical market with locations throughout the world. People committed to speed, technology, and exceptional performance are the cornerstone of our organization. Comprised of dedicated people and decades of manufacturing experience, we have continued to experience strong growth and currently have outstanding career opportunities for equally dedicated people. Job Summary: The component stager is responsible for supplying components to the production line and removing finished goods back to the warehouse. Essential Job Duties and Responsibilities: Responsible for pulling and staging material/components to the assigned production line and return all finished goods to the warehouse audit area. Pulls sub-components from inventory for work orders, create kits and move components to the floor. Manage inventory transactions in IQMS whenever moving components or finished goods. Responsible for line clearance at the end of work order and return of unused pieces to inventory in IQMS. Properly put away, track, pick and pack inventory. Properly package and label parts and product. Load, unload, or stack materials and product. Measure, weigh or count materials and product. Performs other duties as assigned. Essential Qualifications: A high school diploma/GED. Production experience Ability to read and interpret DHRs (Device History Record) Strong attention to detail with good counting and mathematical skills Possess the written, verbal, and interaction skills necessary to work both independently and cooperatively. Competent in the use of computers and various software's, with the ability to access and enter data as necessary Desirable Qualifications: Forklift experience. Experience in injection molding Knowledge of IQMS. ADA Requirements: Shop III Bend, squat, climb, grasp, reach, lift or otherwise move frequently for extended periods Lift, move or otherwise transfer up to 50 lbs. frequently, or more occasionally Walk, stand or otherwise move about continuously Exposure to machine shop physical hazards including chemicals which may require respiratory protection Typically sits, grasps items and performs keyboarding for occasional operation of a computer What SMC has to offer? Clean, Climate-Controlled Environment Stable schedule Paid holiday and PTO Health, dental, and vision insurance 401(k) retirement savings Life and disability insurance Promotional opportunities Training and career growth programs Amazing co-workers Tuition reimbursement Employee Assistance Program At SMC Ltd. we recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please still consider applying. We know that our differences often can bring about innovation, excellence and meaningful work-therefore, people from all backgrounds are encouraged to apply to our positions. Please let us know if you require reasonable accommodations during the interview process. SMC Ltd. is an equal opportunity employer. M/F/D/V; this organization uses E-Verify. Applicants may be subject to pre-employment screening which may include drug screening, reference checks, employment verifications, background screening and/or skills assessments. #IND #LI-HN1

Lumber Handler I Loudonville, Ohio Background: Northwest Hardwoods is the premier Hardwood Lumber producer serving furniture, cabinets, molding, and millwork segments worldwide. We operate manufacturing facilities throughout the United States. We have an immediate opening for a full-time Lumber Handler I. Responsibilities include: * Handling, sorting, and stacking rough-cut lumber by dimension, species, and grade * Working in open warehouses and keeping work areas safe and clean * Physical ability to safely transfer lumber from the production line to the lumber cart. * Banding runners to lumber packs. * Keeping work areas safe and clean. * Basic paperwork knowledge Requirements include: * Must be safety conscious, have a positive attitude, and work well in a team environment * Must have and maintain an excellent attendance record per Policy * Work at a fast pace and be an oriented team player * Pre-employment physical and drug screen required * Candidates must be able to lift 50+ pounds on a regular basis * Always required to wear personal protective equipment * Participate in job rotation and cross-training in other production-related jobs to build other skills * An all-around positive work attitude at all times Education * High school or GED equivalent, or 18 years of age Work Schedules: * Four 10-hour shifts 6:00 AM - 4:30 PM Monday - Thursday At Northwest Hardwoods, we offer a formal paid training program and review process. Northwest Hardwoods also has an excellent benefits program, including medical, dental, vision insurance, 401(k) plan, and paid vacation and holidays. Equal Opportunity Employer This employer is required to notify all applicants of their rights according to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Lumber Handler I Loudonville, Ohio Background: Northwest Hardwoods is the premier Hardwood Lumber producer serving furniture, cabinets, molding, and millwork segments worldwide. We operate manufacturing facilities throughout the United States. We have an immediate opening for a full-time Lumber Handler I. Responsibilities include: Handling, sorting, and stacking rough-cut lumber by dimension, species, and grade • Working in open warehouses and keeping work areas safe and clean • Physical ability to safely transfer lumber from the production line to the lumber cart. • Banding runners to lumber packs. • Keeping work areas safe and clean. • Basic paperwork knowledge Requirements include: Must be safety conscious, have a positive attitude, and work well in a team environment • Must have and maintain an excellent attendance record per Policy • Work at a fast pace and be an oriented team player • Pre-employment physical and drug screen required • Candidates must be able to lift 50+ pounds on a regular basis • Always required to wear personal protective equipment • Participate in job rotation and cross-training in other production-related jobs to build other skills • An all-around positive work attitude at all times Education High school or GED equivalent, or 18 years of age Work Schedules: Four 10-hour shifts 6:00 AM - 4:30 PM Monday - Thursday At Northwest Hardwoods, we offer a formal paid training program and review process. Northwest Hardwoods also has an excellent benefits program, including medical, dental, vision insurance, 401(k) plan, and paid vacation and holidays. Equal Opportunity Employer This employer is required to notify all applicants of their rights according to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.