Carpenter jobs in Clarksdale, MS

Assist Carpenter in planning, lay-out, and performing all types of Carpentry work in accordance with all applicable plans, specifications, codes, and industry standards. Work in other crafts at levels appropriate to training and skills as requested by project supervision. Must have the ability to take direction from a higher skilled worker or foreman. Key Responsibilities Maintain positive working relationships with all members of the crew. Produce high quality work, safely and productively at all times. Provide feedback to ensure all materials, tools, equipment and information is available for the work. Look for opportunities for improvement in all tasks, means and methods regarding the work and be willing to learn from others. Learn and understand all safety hazards related to the work. Effective math skills - add, subtract, multiply, and divide. Learn to safety and effectively use or operate work related tools and equipment. Eliminate WASTE such as waiting, rework, transporting, material storage, and time. If unsure about any aspect of the work or issues regarding safe practices, ask a supervisor before continuing. Minimum Job Requirements Must one to two years' experience in the industrial/commercial construction industry and have a general understanding of the carpentry trade. NCCER Core Curriculum and/or High School Diploma or equivalent preferred. Possess effective verbal and written communication skills. Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements Work up to a 12-hour shift doing hard physical work in varying temperatures and outside conditions. Climb and maintain balance on steel/wood framework, stairs, ladders, and scaffolds. Will lift, push, or pull objects up to 50lbs. on an occasional basis Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis Must be able to comply with all safety standards and procedures May reach above shoulder heights and below the waist on a frequent basis May stoop, kneel, or bend, on an occasional basis Ability to wear personal protective equipment is required (including but not limited to steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) Move in and around confined, cluttered, and uneven areas. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt Inc. is an Equal Opportunity Employer (EOE) that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, religion, sex, sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, or genetic information. We recognize that diversity and inclusion is a driving force in the success of our company.

Full-time Description We are a leader in Millwork, Cabinet and Fixture Installations seeking experienced and enthusiastic working Lead Finish Carpenters who can perform in a diverse range of situations overseeing and installing fixtures, casework and millwork in commercial and retail environments. “We have traveling positions available. If you are looking for stability, outstanding compensation and want to work for a Leader in our Industry, please contact us now.” Requirements Education: High School Diploma or Equivalent Experience: Five (5) years fixture installation and retail or commercial finish carpentry experience. One (1) year minimum supervisory experience. Certification(s): OSHA10 or 30, Forklift, aerial lift (Company will provide if necessary). Technology: Able to download and use APPS on phone and mobile devices. Able to make electronic submissions though company portal. Physical Demands: Ability to walk and stand for long periods of time, climb ladders, work from an aerial lift. Frequent bending, kneeling, twisting and squatting. Work with materials over your head for short durations. Able to lift and carry objects weighing up to 50 lbs. regularly. CONDITIONS OF EMPLOYMENT Must be able to pass a Drug Screening, Criminal Background Check and MVR screening for approved driving status. Must be able to complete a Company Sponsored CPR/First Aid Training course online. Available to work overtime as needed. Our typical workweek is 40 to 60 hours. Be flexible to work non-conventional shifts when required (some overnight projects may occur). Able to travel and be away from home for durations from 2-8 weeks depending on our contract. Must provide own basic hand tools and cordless drill. COMPENSATION AND BENEFITS PACKAGE Company provides Health, Dental and Life Insurance, Long term Disability Plan, 401k, Reimbursement for travel expenses, Travel Perks, Referral Bonuses. Top pay based on experience. KEY RESPONSIBILITIES AND SKILL REQUIREMENTS · Able to complete onsite millwork, cabinet and countertop, fixture, graphic and décor installs in commercial and retail environments. · Personnel management of various crew sizes ranging from 3-6 employees or larger projects of 8 or more employees. · Able to receive, stage and manage large inventory of millwork and fixture parts for distribution and installation. · Able to evaluate site conditions, construction and delivery schedules and when these factors are not aligned, clearly and effectively communicate to Project Management Team, onsite contractor or when necessary, our client. · Able to establish and understand layouts for millwork, fixtures and other elements. · Must always represent the company in a professional manner. Adopt and embrace our company Core Values. · Report time sheets, expense reports, daily reports and progress photos electronically. Generate additional work validations as required when non-contract scope is required. · Perform all tasks of a finish carpenter including installation of cabinets, countertops, standing and running trim (base, chair rail, crown moldings, door and window casings), scribing, coping, installing wall panel systems, retail fixtures etc. · Ability to manage and motivate others while maintaining professionalism. · Able to professionally interact with clients, general contractors and other sub-contractors. · Strong working knowledge of woodworking hand and power tools. · Strong working knowledge and understanding of architectural drawings, shop drawings and fixturing floorplans. · Must have a strong commitment to job site safety including always maintaining a clean jobsite. “OUR CORE VALUES DRIVE EVERY DECISION AND ARE INTERWOVEN INTO EVERYTHING WE DO” We lead the pack. We are fair, honest and respectful in every interaction. We got your back. We support and encourage doing what's right, even when it's not easy We have fun. We inspire, have passion, and create fun in all that we do. We get it done. We are driven to hold ourselves accountable in making “yes” happen. Salary Description $27.00 to $34.00 hourly based on experience

Learn carpentry skills on the job while you get paid! Innovative Restorations is looking for another 2 carpenter apprentices to join our team! Having previous skills in this field is desired but not required! Our work is all interior work! Great pay and benefits for a family owned company. Hiring carpenters and helpers with job security and work booked for 6 months! Starting Pay for unskilled helper/apprentice $14+ (DOE) plus production bonus Benefits include: Year round work inside - not dependent on weather! (except ice, we don't drive in ice) Production bonus per job! 6 paid holidays per year (Pro rated) 1 week paid vacation after 90 days Paid travel time to and from jobs Emergency medical Company match 401k Health insurance Vision insurance Dental insurance Life insurance Requirements: Employment history Pass a Drug Test Clean cut Clean criminal history report Acceptable driving record Job description: Cabinet & flooring Doors & Trim Drywall & Paint Bathroom & Kitchen remodeling Acrylic shower installation Water damage restoration Plumbing All interior work - We work year round!

Full-time Description Full-Time Laborer (Construction/Landscaping) Pay rate: $15.00 - $17.00 HOURLY Valor Environmental is the largest full-service environmental services company in the United States. Valor's services include erosion control, land services, street sweeping, and site maintenance nationwide. Incentives: · Medical, Dental, and Vision Insurance · Life Insurance, Disability Insurance, and Accident Insurance · Paid Holidays · Paid Time Off · 401k with great company match · Bi-weekly pay · Year-Round work RESPONSIBILITIES (Training Provided) · Install and remove Silt Fence on construction sites · Install erosion control blankets, wattles, turbidity barriers, etc. · Work with hand tools (sledge hammer, shovels, utility knives, staple guns, backpack blowers, etc.) · Work in a safe, efficient, manner wearing proper protective equipment at all times while working · Work to make sure client construction sites are clean and presentable Requirements · Construction or landscaping experience preferred · Must be able to physically work outdoors in all types of weather · Must be able to work weekends and extended hours as needed · Be able to lift, pull and push materials and equipment to complete assigned job tasks. Be able to lift 50 pounds of weight frequently throughout assigned workday. (Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions) Salary Description $15-$17/hr

Our culture is rooted in a shared vision - to help keep the world's most precious resource safe - and in the core values that guide us in pursuing this vision and delivering on our mission to clients. We provide the highest quality liquid storage design and construction services at the best long-term value with an unrivaled customer experience. We have built over 3,500 pre-stressed concrete liquid storage tanks over the past 90 years around the country and world, as a result we have become the leader in the industry when it comes to quality and innovation. DN Tanks is seeking a skilled Carpenter Journeyman to join our craft labor team, with key responsibilities throughout all phases of the tank building process. Our carpenters set the pace of work, assisting other local workers with knowledge and guidance for performing the work safely and with quality, and help us keep the world's most precious resource safe. Carpenters are responsible for managing the following tasks at the direction of the Superintendent, Assistant Superintendent and Foreman.Primary Responsibilities Complete assignments in a timely fashion with little supervision; ask for additional information when tasks or assignments are unclear and supports the daily plan. Understand the tank building process and identify the next tasks to be completed in the process. Interprets shoring drawings to install and remove shoring. Assist in forming pipe pits. Assist in training apprentices and new local workers. Follow safety procedures and understand DN Tanks safety policies. Plan safety into each operation and identify or remove hazards immediately as part of the task without being asked. Promote clean, safe work practices by watching over other employees while performing work. Follow quality control (QC) program, understand construction tolerances, and report any quality defects immediately. Qualifications Operate and maintain DN Tanks tools and equipment. Ability to travel to project sites throughout the United States at the direction of the Field Operations Manager. Ability to climb and perform tasks at heights on steel/wood framework, stairs, ladders, shoring, and scaffolds. Ability to wear personal protective equipment including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc. DN is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other federally protected class. All employment is decided on the basis of qualifications, merit, and business need.

Discover Vanderbilt University Medical Center: Located in Nashville, Tennessee, and operating at a global crossroads of teaching, discovery, and patient care, VUMC is a community of individuals who come to work each day with the simple aim of changing the world. It is a place where your expertise will be valued, your knowledge expanded, and your abilities challenged. Vanderbilt Health is committed to an environment where everyone has the chance to thrive and where your uniqueness is sought and celebrated. It is a place where employees know they are part of something that is bigger than themselves, take exceptional pride in their work and never settle for what was good enough yesterday. Vanderbilt's mission is to advance health and wellness through preeminent programs in patient care, education, and research. Organization: Medical Carpentry Job Summary: JOB SUMMARY Works under supervision of Manager or Lead Carpenter in performing the following functions from written and verbal instructions, sketches or plans: build, install, maintain and repair, as appropriate, existing and new structures and fixtures to include ceilings, concrete and other masonry, doors and hardware, drywall, flooring, millwork, roofs, tile, Shop equipment, walls; performs structural remodeling, construction and demolition; performs other related duties as assigned. . KEY RESPONSIBILITIES • Maintenance and upkeep of all Shop work areas, tools, equipment, etc. • All fire alarm response activities appropriate for the Carpentry Shop. • Adherence to all Medical Center Policies and Procedures whether they are specifically referenced in these Key Functions of not. • Adherence to all local and national codes, standards, and regulation that cover any of the items mentioned in these Key Functions. • Participation, as needed in any Medical Center orange or yellow alert as described in the Medical Center Safety and Disaster manual. • Able to work independently with minimal supervision. • Responsibility for accomplishing all assigned Preventive Maintenance Work Requests in a timely manner. • Responsibility for accomplishing all assigned Trouble Call Work Requests in a timely manner. • Responsibility for accomplishing all assigned Work Order Work Requests in a timely manner. • Responsible for assisting with estimate requests, material, and manpower evaluations to insure acceptable work flow is maintained. • Other duties as assigned. TECHNICAL CAPABILITIES Our professional administrative functions include critical supporting roles in information technology and informatics, finance, administration, legal and community affairs, human resources, communications and marketing, development, facilities, and many more. At our growing health system, we support each other and encourage excellence among all who are part of our workforce. High-achieving employees stay at Vanderbilt Health for professional growth, appreciation of benefits, and a sense of community and purpose. Core Accountabilities: * Organizational Impact: Performs tasks that are typically routine that may impact team's performance with occasional guidance. * Problem Solving/ Complexity of work: Utilizes some discretion and research to solve routine problems. * Breadth of Knowledge: Applies knowledge of standards, established processes and procedure that apply to your own job. * Team Interaction: Provides guidance to entry level co-workers. Core Capabilities : Supporting Colleagues : Develops Self and Others: Continuously improves own skills by identifying development opportunities.- Builds and Maintains Relationships: Seeks to understand colleagues' priorities, working styles and develops relationships across areas.- Communicates Effectively: Openly shares information with others and communicates in a clear and courteous manner. Delivering Excellent Services: - Serves Others with Compassion: Invests time to understand the problems, needs of others and how to provide excellent service.- Solves Complex Problems: Seeks to understand issues, solves routine problems, and raises proper concerns in a timely manner. - Offers Meaningful Advice and Support: Listens carefully to understand the issues and provides accurate information and support. Ensuring High Quality: - Performs Excellent Work: Checks work quality before delivery and asks relevant questions to meet quality standards. - Fulfills Safety and Regulatory Requirements: Demonstrates basic knowledge of conditions that affect safety and reports unsafe conditions to the appropriate person or department. Managing Resources Effectively : - Demonstrates Accountability: Takes responsibility for completing assigned activities and thinks beyond standard approaches to provide high-quality work/service. - Stewards Organizational Resources: Displays understanding of how personal actions will impact departmental resources. - Makes Data Driven Decisions: Uses accurate information and good decision making to consistently achieve results on time and without error. Fostering Innovation : - Generates New Ideas: Willingly proposes/accepts ideas or initiatives that will impact day-to-day operations by offering suggestions to enhance them. - Applies Technology: Absorbs new technology quickly; understands when to utilize the appropriate tools and procedures to ensure proper course of action. - Adapts to Change: Embraces changes by keeping an open mind to changing plans and incorporates change instructions into own area of work. Position Qualifications: Responsibilities: Certifications: Work Experience: Relevant Work Experience Experience Level: 5 years Education: High School Diploma or GED Vanderbilt Health is committed to fostering an environment where everyone has the chance to thrive and is committed to the principles of equal opportunity. EOE/Vets/Disabled.

Job Description - Custom Finish Carpenter Reports to: Custom Shop Manager Company: Memphis Millwork About Us Memphis Millwork is a trusted provider of custom millwork and architectural woodwork for commercial and residential clients. We take pride in delivering high -quality, custom -built products that combine craftsmanship, precision, and innovation. We are seeking a skilled Custom Finish Carpenter to join our team and bring unique designs to life through expert woodworking. Position Overview The Custom Finish Carpenter will be responsible for fabricating, assembling, and installing millwork and wood products according to project specifications. This role requires strong woodworking skills, attention to detail, and the ability to work with custom designs, unique finishes, and challenging architectural requirements. Key Responsibilities Interpret blueprints, shop drawings, and project specifications to plan and execute custom builds. Fabricate, cut, assemble, and finish millwork products including cabinetry, furniture, molding, and architectural woodwork. Operate woodworking tools and equipment such as saws, planers, routers, and hand tools. Ensure precision in measurements, joinery, and assembly to meet design intent and quality standards. Collaborate with designers, engineers, and other shop staff to solve design and fabrication challenges. Perform on -site installation of custom millwork as needed. Maintain a safe, clean, and organized work environment. Inspect completed work for accuracy, quality, and craftsmanship. Qualifications High school diploma or equivalent required; technical training in carpentry or woodworking preferred. 3+ years of experience in carpentry, woodworking, or millwork fabrication. Strong ability to read and interpret architectural drawings and technical plans. Skilled in woodworking techniques, joinery, and finishing methods. Familiarity with a wide range of tools, machinery, and materials used in millwork. Detail -oriented with a commitment to producing high -quality custom pieces. Ability to work independently and as part of a team. Skills & Competencies Craftsmanship and precision in woodworking. Problem -solving and creative thinking for custom builds. Strong time management and ability to meet deadlines. Effective communication and collaboration with team members. Safety -conscious mindset and adherence to shop protocols. Finish Carpenter Level 1 Custom laminate counter tops Custom plastic laminate items Competent use of production tools & machinery Closely supervised, helping senior production team members Work productivity at average or below average pace Finish Carpenter Level 2 All skills in Level 1, plus: Custom desks (reception desks, nurse stations) Custom benches, banquettes, etc. Face frames Other moderately complex custom woodworking products Work productivity is average Work quality is average Collaborates with other departments within the company Finish Carpenter 3 All skills in Level 2, plus: Advance knowledge of finish carpentry and custom woodwork assembly Other complex custom woodworking products High level of competency for custom work Requires some supervision Work productivity is above average Work quality is above average Individual is reliable and without attendance issues § Mentors lower level production team members Finish Carpenter 4 All skills in Level 3, plus: Expert knowledge of finish carpentry and custom woodwork assembly Completes complex custom woodworking projects Requires minimal supervision Work productivity is excellent Work quality exceeds expectations Individual is reliable and without attendance issues Finish Carpenter - Level 5 All skills in Level 4, plus: Work productivity is superb Work quality is at the level of master craftsmanship Effectively leads junior team members Ensures efficient production of custom products Serves as subject matter expert to other departments for customs planning Requirements Qualifications High school diploma or equivalent required; technical training in carpentry or woodworking preferred. 3+ years of experience in carpentry, woodworking, or millwork fabrication. Strong ability to read and interpret architectural drawings and technical plans. Skilled in woodworking techniques, joinery, and finishing methods. Familiarity with a wide range of tools, machinery, and materials used in millwork. Detail -oriented with a commitment to producing high -quality custom pieces. Ability to work independently and as part of a team. Skills & Competencies Craftsmanship and precision in woodworking. Problem -solving and creative thinking for custom builds. Strong time management and ability to meet deadlines. Effective communication and collaboration with team members. Safety -conscious mindset and adherence to shop protocols. Benefits What We Offer Competitive hourly wage based on experience. Health, dental, and retirement benefits. Paid time off and holidays. Opportunity to work on unique, high -profile, and custom projects. A collaborative work environment that values skill, creativity, and craftsmanship.

Job Description Shed Builder - Full-Time Watson Sheds is hiring an experienced carpenter to build sheds. If you're passionate about careful craftsmanship and eager to earn a good income this could be the opportunity for you! This position pays a competitive wage based on production. Your earning rate is up to you! Are you pursuing a career in the construction field? Do you take pride in creating durable, well-built products? Would you like to work for a company where people truly matter? If so, we'd love for you to apply today. About Watson Sheds At Watson Sheds, we are committed to providing reliable, locally built sheds and structures that fit a variety of storage and lifestyle needs. Our company is Christ-centered, and our purpose is to empower people to care for their families and to have thriving lives within their communities. We believe in treating our employees like family, offering steady work, competitive pay, and a positive environment where your effort directly impacts your income. Position Summary As a Shed Builder, you'll work in our Morrison, TN manufacturing shop, building sheds from the floor up. Duties include carpentry tasks such as framing, roofing, siding, trim work, painting, and installing doors and windows. You'll use a variety of hand tools, power tools, and may also operate forklifts, ladders, and scaffolding. This is a production-driven environment where attention to detail, efficiency, and teamwork are key. What We're Looking For Keen eye for detail and results-driven approach Responsible, trustworthy, and self-motivated Strong multi-tasking and time management skills Ability to read and follow floor plans, measurements, and detailed construction notes Good-natured team player with a respectful, cooperative attitude Adaptable and open to instruction and learning Must provide and maintain personal hand tools Responsibilities Cut, trim, and handle construction materials Frame and build walls Nail, caulk, and router siding Install metal roofing or shingles Attach trim, hang doors, install windows, and build lofts or custom additions Safely operate saws, drills, nail guns, and other construction tools Operate a forklift according to safety protocols Work Environment Daily work primarily in a covered open-air shop Occasional work outdoors in various weather conditions Exposure to sawdust, paint, and noise typical of a manufacturing environment Must be able to stand/walk for extended periods, stoop, kneel, crouch, or crawl Must be able to lift at least 70 lbs and climb ladders up to 6 ft Education & Experience High School Diploma or equivalent At least 2 years of construction or carpentry experience preferred Compensation This is a production-based position with uncapped earning potential. Your performance determines your pay-meaning the harder and smarter you work, the more you can earn. Reliable, steady work ensures consistent opportunities to grow your income. Experienced builders can make $60-90K annually. Benefits Health Insurance (after one year of full-time employment) Five paid holidays per year (New Year's Day, Memorial Day, 4th of July, Labor Day, Christmas Day) Paid Time Off (after one year of full-time employment) Career development opportunities and training Periodic Company Meals & Events We are a safe environment with zero drug and alcohol tolerance. We do random drug testing on all our employees.

We are hiring SKILLED, detail-oriented finish carpenters for residential and commercial projects. Candidates must have construction background in flooring, carpentry, painting, cabinets, trim, panel work, and/or any combination of these. There is room to grow with us. We are looking for self-motivated, hard-working and quality driven individuals. You must be able to work on your own in a fast-paced environment. If you're the type who comes to a job ready to work, gives it your all and is willing to get paid weekly, this is for you. Qualifications: Must have verifiable work history as a Carpenter. Must have YOUR OWN basic hand and power tools. (Specialized tools may be provided based upon the job. ) Must be skilled with said tools. Be able to pass random drug tests. Possess hands-on experience working with carpentry materials. Strong working knowledge of carpentry techniques and methods, including installation and construction. Have the ability to accurately read blueprints and technical drawings. Solid basic math skills. Good character. Looking for people who want to work. We offer: Competitive weekly pay. Ability to grow with us. Job Type: Full-time

Baldwin & Shell Construction Company is looking for a Carpenter who will thrive in our company. The Carpenter is responsible for constructing wood-based products, layouts, installations, repairing, finishing, and maintaining various structures such as buildings and fixtures. They must comply with local building codes, and health and safety regulations. The Carpenter reports directly to the Assistant Superintendent or Superintendent. Responsibilities: Read blueprints, drawings, and sketches to fully grasp requirements. Construct and install building frameworks, including walls, floors, and doorframes. Inspect and replace damaged framework or other structures and fixtures. Take measurements and calculate the size and amount of material needed. Cut, shape and smooth lumber and other material (e.g. fiberglass) according to measurements. Build window frames, doors, staircases, and frame buildings by using raw materials or pre-constructed items. Lay out flooring, roofing or drywall ensuring they are level and compatible. Carve and assemble furniture, cabinets, shelves, and other items and install them where designated. Inspect places and conduct repairs or maintenance. Build scaffolding and other construction structures. Minimum Qualifications: At least three (3) years of carpentry, construction, and hardware experience. Must have experience installing doors and hardware on commercial construction projects. Good communication skills. Knowledge of basic mathematics. Ability to take accurate measurements using and reading tape measures. Ability to read and interpret blueprints. Ability to operate tools, machines, and other equipment safely. Must be able to pass a background check and pre-employment drug test. Pursuant to the Arkansas Medical Marijuana Act 593, this position is a designated safety-sensitive position according to Baldwin & Shell standards and processes. Preferred Qualifications: Experience in commercial construction. Please note that this job description is not designed to cover or contain a comprehensive listing of the employee's activities, duties, or responsibilities required for this job. Duties, responsibilities, and activities may change at any time, with or without notice. What we offer: Highly competitive compensation 401(k) retirement with matching funds Health, Dental, and Vision insurance 8 Paid holidays Vacation accrual Short-term disability Maternity and Paternity Leave Pet insurance Free & confidential Employee Assistance Program Excellent work environment Baldwin & Shell is proud to offer highly competitive compensation, benefits package, and a family work environment! If you think you would thrive in this position, please apply with us today! For more information or questions, please reach out to our Human Resources Team: Email: ********************* ATTN: HR Phone: ************ Baldwin & Shell is a drug-free workplace and an E-Verify participant. Baldwin & Shell is proud to be a part of an Equal Opportunity Employer to include women, minorities, veterans, persons with disabilities, color, sex, sexual orientation, gender identity, religion, origin, and genetic information. All are encouraged to apply!

JobID: 9151 JobSchedule: Full time JobShift: : Assist Carpenter in planning, lay-out, and performing all types of Carpentry work in accordance with all applicable plans, specifications, codes, and industry standards. Work in other crafts at levels appropriate to training and skills as requested by project supervision. Must have the ability to take direction from a higher skilled worker or foreman. Key Responsibilities * Maintain positive working relationships with all members of the crew. * Produce high quality work, safely and productively at all times. * Provide feedback to ensure all materials, tools, equipment and information is available for the work. * Look for opportunities for improvement in all tasks, means and methods regarding the work and be willing to learn from others. * Learn and understand all safety hazards related to the work. * Effective math skills - add, subtract, multiply, and divide. * Learn to safety and effectively use or operate work related tools and equipment. * Eliminate WASTE such as waiting, rework, transporting, material storage, and time. * If unsure about any aspect of the work or issues regarding safe practices, ask a supervisor before continuing. Minimum Job Requirements * Must one to two years' experience in the industrial/commercial construction industry and have a general understanding of the carpentry trade. * NCCER Core Curriculum and/or High School Diploma or equivalent preferred. * Possess effective verbal and written communication skills. Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements * Work up to a 12-hour shift doing hard physical work in varying temperatures and outside conditions. * Climb and maintain balance on steel/wood framework, stairs, ladders, and scaffolds. * Will lift, push, or pull objects up to 50lbs. on an occasional basis * Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis * Must be able to comply with all safety standards and procedures * May reach above shoulder heights and below the waist on a frequent basis * May stoop, kneel, or bend, on an occasional basis * Ability to wear personal protective equipment is required (including but not limited to steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) * Move in and around confined, cluttered, and uneven areas. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt Inc. is an Equal Opportunity Employer (EOE) that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, religion, sex, sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, or genetic information. We recognize that diversity and inclusion is a driving force in the success of our company.

Full-time Description We are a leader in Millwork, Cabinet and Fixture Installations seeking experienced and enthusiastic working Lead Finish Carpenters who can perform in a diverse range of situations overseeing and installing fixtures, casework and millwork in commercial and retail environments. “We have traveling positions available. If you are looking for stability, outstanding compensation and want to work for a Leader in our Industry, please contact us now.” Requirements Education: High School Diploma or Equivalent Experience: Five (5) years fixture installation and retail or commercial finish carpentry experience. One (1) year minimum supervisory experience. Certification(s): OSHA10 or 30, Forklift, aerial lift (Company will provide if necessary). Technology: Able to download and use APPS on phone and mobile devices. Able to make electronic submissions though company portal. Physical Demands: Ability to walk and stand for long periods of time, climb ladders, work from an aerial lift. Frequent bending, kneeling, twisting and squatting. Work with materials over your head for short durations. Able to lift and carry objects weighing up to 50 lbs. regularly. CONDITIONS OF EMPLOYMENT Must be able to pass a Drug Screening, Criminal Background Check and MVR screening for approved driving status. Must be able to complete a Company Sponsored CPR/First Aid Training course online. Available to work overtime as needed. Our typical workweek is 40 to 60 hours. Be flexible to work non-conventional shifts when required (some overnight projects may occur). Able to travel and be away from home for durations from 2-8 weeks depending on our contract. Must provide own basic hand tools and cordless drill. COMPENSATION AND BENEFITS PACKAGE Company provides Health, Dental and Life Insurance, Long term Disability Plan, 401k, Reimbursement for travel expenses, Travel Perks, Referral Bonuses. Top pay based on experience. KEY RESPONSIBILITIES AND SKILL REQUIREMENTS · Able to complete onsite millwork, cabinet and countertop, fixture, graphic and décor installs in commercial and retail environments. · Personnel management of various crew sizes ranging from 3-6 employees or larger projects of 8 or more employees. · Able to receive, stage and manage large inventory of millwork and fixture parts for distribution and installation. · Able to evaluate site conditions, construction and delivery schedules and when these factors are not aligned, clearly and effectively communicate to Project Management Team, onsite contractor or when necessary, our client. · Able to establish and understand layouts for millwork, fixtures and other elements. · Must always represent the company in a professional manner. Adopt and embrace our company Core Values. · Report time sheets, expense reports, daily reports and progress photos electronically. Generate additional work validations as required when non-contract scope is required. · Perform all tasks of a finish carpenter including installation of cabinets, countertops, standing and running trim (base, chair rail, crown moldings, door and window casings), scribing, coping, installing wall panel systems, retail fixtures etc. · Ability to manage and motivate others while maintaining professionalism. · Able to professionally interact with clients, general contractors and other sub-contractors. · Strong working knowledge of woodworking hand and power tools. · Strong working knowledge and understanding of architectural drawings, shop drawings and fixturing floorplans. · Must have a strong commitment to job site safety including always maintaining a clean jobsite. “OUR CORE VALUES DRIVE EVERY DECISION AND ARE INTERWOVEN INTO EVERYTHING WE DO” We lead the pack. We are fair, honest and respectful in every interaction. We got your back. We support and encourage doing what's right, even when it's not easy We have fun. We inspire, have passion, and create fun in all that we do. We get it done. We are driven to hold ourselves accountable in making “yes” happen. Salary Description $27.00 to $34.00 hourly based on experience

Learn carpentry skills on the job while you get paid! Innovative Restorations is looking for another 2 carpenter apprentices to join our team! Having previous skills in this field is desired but not required! Our work is all interior work! Great pay and benefits for a family owned company. Hiring carpenters and helpers with job security and work booked for 6 months! Starting Pay for unskilled helper/apprentice $14+ (DOE) plus production bonus Benefits include: Year round work inside not dependent on weather! (except ice, we don't drive in ice) Production bonus per job! 6 paid holidays per year (Pro rated) 1 week paid vacation after 90 days Paid travel time to and from jobs Emergency medical Company match 401k Health insurance Vision insurance Dental insurance Life insurance Requirements: Employment history Pass a Drug Test Clean cut Clean criminal history report Acceptable driving record Job description: Cabinet & flooring Doors & Trim Drywall & Paint Bathroom & Kitchen remodeling Acrylic shower installation Water damage restoration Plumbing All interior work We work year round!

Job DescriptionOur culture is rooted in a shared vision - to help keep the world's most precious resource safe - and in the core values that guide us in pursuing this vision and delivering on our mission to clients. We provide the highest quality liquid storage design and construction services at the best long-term value with an unrivaled customer experience. We have built over 3,500 pre-stressed concrete liquid storage tanks over the past 90 years around the country and world, as a result we have become the leader in the industry when it comes to quality and innovation. DN Tanks is seeking a skilled Carpenter Journeyman to join our craft labor team, with key responsibilities throughout all phases of the tank building process. Our carpenters set the pace of work, assisting other local workers with knowledge and guidance for performing the work safely and with quality, and help us keep the world's most precious resource safe. Carpenters are responsible for managing the following tasks at the direction of the Superintendent, Assistant Superintendent and Foreman.Primary Responsibilities Complete assignments in a timely fashion with little supervision; ask for additional information when tasks or assignments are unclear and supports the daily plan. Understand the tank building process and identify the next tasks to be completed in the process. Interprets shoring drawings to install and remove shoring. Assist in forming pipe pits. Assist in training apprentices and new local workers. Follow safety procedures and understand DN Tanks safety policies. Plan safety into each operation and identify or remove hazards immediately as part of the task without being asked. Promote clean, safe work practices by watching over other employees while performing work. Follow quality control (QC) program, understand construction tolerances, and report any quality defects immediately. Qualifications Operate and maintain DN Tanks tools and equipment. Ability to travel to project sites throughout the United States at the direction of the Field Operations Manager. Ability to climb and perform tasks at heights on steel/wood framework, stairs, ladders, shoring, and scaffolds. Ability to wear personal protective equipment including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc. DN is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other federally protected class. All employment is decided on the basis of qualifications, merit, and business need.

Full-time Description We are a leader in Millwork, Cabinet and Fixture Installations seeking experienced and enthusiastic working Lead Finish Carpenters who can perform in a diverse range of situations overseeing and installing fixtures, casework and millwork in commercial and retail environments. “We have traveling positions available. If you are looking for stability, outstanding compensation and want to work for a Leader in our Industry, please contact us now.” Requirements Education: High School Diploma or Equivalent Experience: Five (5) years fixture installation and retail or commercial finish carpentry experience. One (1) year minimum supervisory experience. Certification(s): OSHA10 or 30, Forklift, aerial lift (Company will provide if necessary). Technology: Able to download and use APPS on phone and mobile devices. Able to make electronic submissions though company portal. Physical Demands: Ability to walk and stand for long periods of time, climb ladders, work from an aerial lift. Frequent bending, kneeling, twisting and squatting. Work with materials over your head for short durations. Able to lift and carry objects weighing up to 50 lbs. regularly. CONDITIONS OF EMPLOYMENT Must be able to pass a Drug Screening, Criminal Background Check and MVR screening for approved driving status. Must be able to complete a Company Sponsored CPR/First Aid Training course online. Available to work overtime as needed. Our typical workweek is 40 to 60 hours. Be flexible to work non-conventional shifts when required (some overnight projects may occur). Able to travel and be away from home for durations from 2-8 weeks depending on our contract. Must provide own basic hand tools and cordless drill. COMPENSATION AND BENEFITS PACKAGE Company provides Health, Dental and Life Insurance, Long term Disability Plan, 401k, Reimbursement for travel expenses, Travel Perks, Referral Bonuses. Top pay based on experience. KEY RESPONSIBILITIES AND SKILL REQUIREMENTS · Able to complete onsite millwork, cabinet and countertop, fixture, graphic and décor installs in commercial and retail environments. · Personnel management of various crew sizes ranging from 3-6 employees or larger projects of 8 or more employees. · Able to receive, stage and manage large inventory of millwork and fixture parts for distribution and installation. · Able to evaluate site conditions, construction and delivery schedules and when these factors are not aligned, clearly and effectively communicate to Project Management Team, onsite contractor or when necessary, our client. · Able to establish and understand layouts for millwork, fixtures and other elements. · Must always represent the company in a professional manner. Adopt and embrace our company Core Values. · Report time sheets, expense reports, daily reports and progress photos electronically. Generate additional work validations as required when non-contract scope is required. · Perform all tasks of a finish carpenter including installation of cabinets, countertops, standing and running trim (base, chair rail, crown moldings, door and window casings), scribing, coping, installing wall panel systems, retail fixtures etc. · Ability to manage and motivate others while maintaining professionalism. · Able to professionally interact with clients, general contractors and other sub-contractors. · Strong working knowledge of woodworking hand and power tools. · Strong working knowledge and understanding of architectural drawings, shop drawings and fixturing floorplans. · Must have a strong commitment to job site safety including always maintaining a clean jobsite. “OUR CORE VALUES DRIVE EVERY DECISION AND ARE INTERWOVEN INTO EVERYTHING WE DO” We lead the pack. We are fair, honest and respectful in every interaction. We got your back. We support and encourage doing what's right, even when it's not easy We have fun. We inspire, have passion, and create fun in all that we do. We get it done. We are driven to hold ourselves accountable in making “yes” happen. Salary Description $27.00 to $34.00 hourly based on experience

JobID: 9211 JobSchedule: Full time JobShift: : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Plan, lay-out and perform all types of Carpentry work in accordance with all applicable plans, specifications, codes, and industry standards. Work in other crafts at levels appropriate to training and skills as requested by project supervision. Job Summary Plan, lay-out and perform all types of Carpentry work in accordance with all applicable plans, specifications, codes, and industry standards. Work in other crafts at levels appropriate to training and skills as requested by project supervision. Key Responsibilities * Maintain positive working relationships with all members of the crew. * Produce high quality work, safely and productively at all times. * Provide feedback to ensure all materials, tools, equipment and information is available for the work. * Look for opportunities for improvement in all tasks, means and methods regarding the work and be willing to learn from others and continually seek opportunities to share knowledge and teach others. * High proficiency in all related trade mathematics. * Inspect subordinates work, ensure accuracy and compliance with plans and specifications, explain deficiencies and take any necessary corrective action. * Eliminate WASTE such as waiting, rework, transporting, material storage and time. Minimum Job Requirements * Must have a minimum of one year (level I), two years (level II), three years (level III) and four years (Sr.) experience in the industrial/commercial construction industry and have an in-depth understanding of the carpentry trade. * Must be able to read and understand drawings, specifications, safety and quality standards and effectively utilize all trade tools and equipment relevant to the work. * Possess effective verbal and written communication skills. Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements * Work up to a 12 hour shift doing hard physical work in varying temperatures and outside conditions. * Climb and maintain balance on steel/wood framework, stairs, ladders and scaffolds. * Will lift, push or pull objects up to 50lbs. on an occasional basis * Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis * Must be able to comply with all safety standards and procedures * May reach above shoulder heights and below the waist on a frequent basis * May stoop, kneel, or bend, on an occasional basis * Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) * Move in and around confined, cluttered and uneven areas. * May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt Inc. is an Equal Opportunity Employer (EOE) that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, religion, sex, sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, or genetic information. We recognize that diversity and inclusion is a driving force in the success of our company.

Our culture is rooted in a shared vision - to help keep the world's most precious resource safe - and in the core values that guide us in pursuing this vision and delivering on our mission to clients. We provide the highest quality liquid storage design and construction services at the best long-term value with an unrivaled customer experience. We have built over 3,500 pre-stressed concrete liquid storage tanks over the past 90 years around the country and world, as a result we have become the leader in the industry when it comes to quality and innovation. DN Tanks is seeking a skilled Carpenter Foreman to join our craft labor team. In this role, the Carpenter Foreman will oversee production, quality, and safety under the direction of the Assistant Superintendent and Superintendent. The Foreman will play an essential role in ensuring the successful completion of all work by providing hands-on support and guidance to the team. This includes assisting in training apprentices, journeymen, and other field personnel to ensure all tasks are performed safely and with high quality.Primary Responsibilities Understands how the Carpenter interacts with a Laborer during the tank building process and can direct the work as required. Establishes crews, assigns responsibilities and follows through on assigned work to meet the project timeline. Reads and interprets tank drawings and construction information package to ensure work is performed according to specifications. Inventories material upon delivery to ensure components comply with the contract drawings prior to signature. Involved in daily closeout meetings with the Superintendent providing an update on the day's activities and needs for the following day. Follows quality control (QC) program, understands construction tolerances, and reports any quality defects immediately. Checks and confirms elevation grades and plumbness on critical tank components. Follows and upholds safety procedures and understands DN Tanks safety policies. Identifies hazards, takes action to correct them, and is responsible for recognizing those who do the same in accordance with the Award of Excellence (AOE) Program. Promotes clean, safe work practices by watching over other employees while performing work. Provide coaching and training while motivating the team to produce quality work and ensure all safety standards are met with all individuals on the project. Maintain all certifications in compliance with DN Tanks Safety & Equipment Programs. Performs all jobsite layout utilizing survey equipment under direction of the Superintendent. Supports the training program by working closely with other traveling tank builders and utilizing all resources available in DN University. Qualifications Operate and maintain DN Tanks tools and equipment. Ability to travel to project sites throughout the United States at the direction of the Field Operations Manager. Ability to climb and perform tasks at heights on steel/wood framework, stairs, ladders, shoring, and scaffolds. Ability to wear personal protective equipment including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc. Ability to complete DN Tanks crane certification. DN is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other federally protected class. All employment is decided on the basis of qualifications, merit, and business need.

As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Plan, lay-out and perform all types of Carpentry work in accordance with all applicable plans, specifications, codes, and industry standards. Work in other crafts at levels appropriate to training and skills as requested by project supervision. Job Summary Plan, lay-out and perform all types of Carpentry work in accordance with all applicable plans, specifications, codes, and industry standards. Work in other crafts at levels appropriate to training and skills as requested by project supervision. Key Responsibilities Maintain positive working relationships with all members of the crew. Produce high quality work, safely and productively at all times. Provide feedback to ensure all materials, tools, equipment and information is available for the work. Look for opportunities for improvement in all tasks, means and methods regarding the work and be willing to learn from others and continually seek opportunities to share knowledge and teach others. High proficiency in all related trade mathematics. Inspect subordinates work, ensure accuracy and compliance with plans and specifications, explain deficiencies and take any necessary corrective action. Eliminate WASTE such as waiting, rework, transporting, material storage and time. Minimum Job Requirements Must have a minimum of one year (level I), two years (level II), three years (level III) and four years (Sr.) experience in the industrial/commercial construction industry and have an in-depth understanding of the carpentry trade. Must be able to read and understand drawings, specifications, safety and quality standards and effectively utilize all trade tools and equipment relevant to the work. Possess effective verbal and written communication skills. Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements Work up to a 12 hour shift doing hard physical work in varying temperatures and outside conditions. Climb and maintain balance on steel/wood framework, stairs, ladders and scaffolds. Will lift, push or pull objects up to 50lbs. on an occasional basis Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis Must be able to comply with all safety standards and procedures May reach above shoulder heights and below the waist on a frequent basis May stoop, kneel, or bend, on an occasional basis Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) Move in and around confined, cluttered and uneven areas. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt Inc. is an Equal Opportunity Employer (EOE) that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, religion, sex, sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, or genetic information. We recognize that diversity and inclusion is a driving force in the success of our company.

Job DescriptionDescription: We are a leader in Millwork, Cabinet and Fixture Installations seeking experienced and enthusiastic working Lead Finish Carpenters who can perform in a diverse range of situations overseeing and installing fixtures, casework and millwork in commercial and retail environments. “We have traveling positions available. If you are looking for stability, outstanding compensation and want to work for a Leader in our Industry, please contact us now.” Requirements: Education: High School Diploma or Equivalent Experience: Five (5) years fixture installation and retail or commercial finish carpentry experience. One (1) year minimum supervisory experience. Certification(s): OSHA10 or 30, Forklift, aerial lift (Company will provide if necessary). Technology: Able to download and use APPS on phone and mobile devices. Able to make electronic submissions though company portal. Physical Demands: Ability to walk and stand for long periods of time, climb ladders, work from an aerial lift. Frequent bending, kneeling, twisting and squatting. Work with materials over your head for short durations. Able to lift and carry objects weighing up to 50 lbs. regularly. CONDITIONS OF EMPLOYMENT Must be able to pass a Drug Screening, Criminal Background Check and MVR screening for approved driving status. Must be able to complete a Company Sponsored CPR/First Aid Training course online. Available to work overtime as needed. Our typical workweek is 40 to 60 hours. Be flexible to work non-conventional shifts when required (some overnight projects may occur). Able to travel and be away from home for durations from 2-8 weeks depending on our contract. Must provide own basic hand tools and cordless drill. COMPENSATION AND BENEFITS PACKAGE Company provides Health, Dental and Life Insurance, Long term Disability Plan, 401k, Reimbursement for travel expenses, Travel Perks, Referral Bonuses. Top pay based on experience. KEY RESPONSIBILITIES AND SKILL REQUIREMENTS · Able to complete onsite millwork, cabinet and countertop, fixture, graphic and décor installs in commercial and retail environments. · Personnel management of various crew sizes ranging from 3-6 employees or larger projects of 8 or more employees. · Able to receive, stage and manage large inventory of millwork and fixture parts for distribution and installation. · Able to evaluate site conditions, construction and delivery schedules and when these factors are not aligned, clearly and effectively communicate to Project Management Team, onsite contractor or when necessary, our client. · Able to establish and understand layouts for millwork, fixtures and other elements. · Must always represent the company in a professional manner. Adopt and embrace our company Core Values. · Report time sheets, expense reports, daily reports and progress photos electronically. Generate additional work validations as required when non-contract scope is required. · Perform all tasks of a finish carpenter including installation of cabinets, countertops, standing and running trim (base, chair rail, crown moldings, door and window casings), scribing, coping, installing wall panel systems, retail fixtures etc. · Ability to manage and motivate others while maintaining professionalism. · Able to professionally interact with clients, general contractors and other sub-contractors. · Strong working knowledge of woodworking hand and power tools. · Strong working knowledge and understanding of architectural drawings, shop drawings and fixturing floorplans. · Must have a strong commitment to job site safety including always maintaining a clean jobsite. “OUR CORE VALUES DRIVE EVERY DECISION AND ARE INTERWOVEN INTO EVERYTHING WE DO” We lead the pack. We are fair, honest and respectful in every interaction. We got your back. We support and encourage doing what's right, even when it's not easy We have fun. We inspire, have passion, and create fun in all that we do. We get it done. We are driven to hold ourselves accountable in making “yes” happen.