Carpenter jobs in Longview, TX

Assist Carpenter in planning, lay-out, and performing all types of Carpentry work in accordance with all applicable plans, specifications, codes, and industry standards. Work in other crafts at levels appropriate to training and skills as requested by project supervision. Must have the ability to take direction from a higher skilled worker or foreman. Key Responsibilities Maintain positive working relationships with all members of the crew. Produce high quality work, safely and productively at all times. Provide feedback to ensure all materials, tools, equipment and information is available for the work. Look for opportunities for improvement in all tasks, means and methods regarding the work and be willing to learn from others. Learn and understand all safety hazards related to the work. Effective math skills - add, subtract, multiply, and divide. Learn to safety and effectively use or operate work related tools and equipment. Eliminate WASTE such as waiting, rework, transporting, material storage, and time. If unsure about any aspect of the work or issues regarding safe practices, ask a supervisor before continuing. Minimum Job Requirements Must one to two years' experience in the industrial/commercial construction industry and have a general understanding of the carpentry trade. NCCER Core Curriculum and/or High School Diploma or equivalent preferred. Possess effective verbal and written communication skills. Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements Work up to a 12-hour shift doing hard physical work in varying temperatures and outside conditions. Climb and maintain balance on steel/wood framework, stairs, ladders, and scaffolds. Will lift, push, or pull objects up to 50lbs. on an occasional basis Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis Must be able to comply with all safety standards and procedures May reach above shoulder heights and below the waist on a frequent basis May stoop, kneel, or bend, on an occasional basis Ability to wear personal protective equipment is required (including but not limited to steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) Move in and around confined, cluttered, and uneven areas. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt Inc. is an Equal Opportunity Employer (EOE) that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, religion, sex, sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, or genetic information. We recognize that diversity and inclusion is a driving force in the success of our company.

Join our team as an evening shift, full-time, Carpenter in Tyler, TX. Why Join Us? Thrive in a People-First Environment and Make Healthcare Better * Thrive: We empower our team with career growth opportunities, tuition assistance, and resources that support your wellness, education, and financial well-being. * People-First: We prioritize your well-being with paid time off, comprehensive health benefits, and a supportive, inclusive culture where you are valued and cared for. * Make Healthcare Better: We use advanced technology to support our team and enhance patient care. Get to Know Your Team: * UT Health Tyler, the flagship hospital of the system, has 432 licensed beds specializing in advanced acute care medicine. Our hospital includes a 24-hour ER with Level 1 trauma center, a comprehensive stroke center, more than 500 physicians and a full complement of subspecialty groups. Responsibilities * Perform preventive and corrective maintenance on all assigned equipment and systems. * Maintain records of inspections, testing, repairs and preventive maintenance on assigned equipment. * Provide quality customer service to ensure customer satisfaction. * Participate in construction and renovation projects as requested. Qualifications Job Requirements: * High School diploma or equivalent. * Five (5) to ten (10) years' experience as carpenter and general maintenance work and/or the completion of apprenticeship in the trade. * Completion of apprenticeship in the trade in lieu of above stated experience. * Must be thoroughly familiar with tools, methods, techniques, equipment and procedures normally associated with trade. * Comply with regulatory requirements, guidelines, and policies.

Job Description Stone Bridge is seeking a skilled carpenter, specializing in creating high-quality commercial store furniture. The ideal candidate will combine traditional woodworking expertise with modern fabrication techniques. Key Responsibilities: Fabricate custom store fixtures including display cabinets, countertops, and clothing racks Read and interpret technical drawings and specifications Build and install shelving systems that meet retail display requirements Ensure all projects meet quality standards and commercial durability requirements Maintain a clean and organized workspace Required Skills & Experience: 2-3 years of experience in commercial carpentry or furniture making Proficient with all power tools including table saw, grinder, and sander Experience with finish work and detailed woodworking Strong knowledge of different wood types and finishing techniques Ability to take accurate measurements and work with precision Physical ability to lift 50+ pounds and stand for extended periods Monday - Friday 7a-4p Pay: $15.00-$16.00 (PAID WEEKLY) Temp to hire Location: Tyler RESUME IS REQUIRED Must be able to pass a Background Check and Drug Screen #T2023

The Residential Drywall Carpenter is responsible for installing, repairing, and finishing drywall in residential buildings. This includes measuring, cutting, and fitting drywall panels, as well as finishing joints and preparing surfaces for painting or other finishes. The ideal candidate will have a strong attention to detail, the ability to read blueprints, and experience with various hand and power tools. The location of this position will vary based on the project's location in Houston and the surrounding areas. Requirements Key Responsibilities: Installation: Measure and cut drywall sheets to the required size and shape. Attach drywall panels to interior wall and ceiling frameworks using nails, screws, or adhesives. Fit and secure drywall into position, ensuring panels are level and aligned. Finishing: Apply tape and compound to seams and joints to create a smooth, even surface. Sand and smooth the drywall surface in preparation for painting or finishing. Apply texture to walls and ceilings using a variety of techniques and tools. Repair and Maintenance: Repair existing drywall by patching holes, cracks, and other damages. Perform routine maintenance on tools and equipment. Blueprint Reading: Interpret and follow construction plans, blueprints, and sketches to ensure accurate installation. Ensure all work complies with building codes and regulations. Quality Control: Inspect work to ensure it meets high standards of quality and craftsmanship. Identify and address any issues or discrepancies promptly. Safety: Follow all safety protocols and procedures to maintain a safe work environment. Wear appropriate personal protective equipment (PPE) as required. Qualifications: High school diploma or equivalent. Proven experience as a drywall carpenter or similar role. Proficiency in using hand and power tools, including but not limited to saws, drills, and sanders. Ability to read and interpret blueprints and technical drawings. Strong attention to detail and problem -solving skills. Physical stamina and ability to perform manual labor, including lifting and carrying heavy materials. Knowledge of building codes and safety regulations. Excellent communication and teamwork skills. Preferred Qualifications: Vocational training or certification in carpentry or construction. Previous experience in residential construction or remodeling projects. Working Conditions: Work is performed in residential buildings, which may be occupied or under construction. Exposure to dust, noise, and various weather. May require bending, kneeling, lifting, and standing for extended periods. Employment Type: Contract/temporary positions available. Compensation: Competitive hourly wage or salary based on experience and qualifications. Benefits package may include health insurance, retirement plans, and paid time off. Application Process: Interested candidates should submit a resume and cover letter detailing their relevant experience and qualifications. References and a portfolio of previous work may be requested. This job description provides a comprehensive overview of the duties, responsibilities, and qualifications required for a Residential Drywall Carpenter. Adjustments may be needed to suit specific company requirements or project needs.

REPORTS TO: Foreman A skilled carpenter involved in high level millwork that can be woodwork, casework, and/or ornamental metalwork. Duties & Responsibilities Installation of AWW, PL + Metal casework, fume hoods, DFH, misc. specialties. Preplanning: tools needed, materials, installation techniques that is the fastest and safest way possible. Safety Responsibilities: Responsible to follow and participate in the ISEC Safety Program and adhere to the ISEC Safety Promise. Perform their jobs in the safest manner prescribed - Never put themselves in harm's way. Conduct themselves in a way that enhances their personal safety and that of their coworkers contributing to a positive work environment. Report workplace hazards and make suggestions for their control. Use Stop Work Authority and respect Stop Work Authority on job. Cooperate and contribute toward the overall success of the safety program. Report all injuries and incidents as soon as possible. Preferred Qualifications Education/Experience Experience in casework, plastic laminate, and architectural millwork Knowledge/Skills Ability to read blueprints Supply personal tools Ability to work with minimal supervision Minimum Qualifications Education/Experience High School Education or Equivalent 3-5 years experience as a finished carpenter Union member where applicable Requirements: Workers should be able to: Physically, workers must be able to: Climb and maintain balance on ladders and scaffolds; Stoop, kneel, and crouch; Use hands and arms to reach for, handle, and manipulate objects; See well (either naturally or with correction); and lift and carry objects weighing up to 50 pounds.

SUMMARY Journeyman - Typically 3 years and above documented field experience in chosen craft discipline with ability to read and interpret instructions and document, plan and perform work activities independently. Constructs, fabricates, installs and dismantles form work of fixtures of metal, wood and other accessories. RESPONSIBILITES - Builds wooded structures, such as stairs, concrete forms, scaffolds, tunnel and sewer supports, and temporary frame shelters, according to blueprints, or oral instructions, and lays out and installs partitions and cabinet work. - Examines blueprints, sketches or building plans for to determine material required and dimensions of structure or fixture to be fabricated. - Selects, loads, and hauls job material to work site. - Prepares layout of form or fixture to be fabricated using lines or grades. - Measures boards, timbers, or plywood using square, measuring tape and ruler and marks cutting lines on materials using pencil and scriber. Shapes materials to required sizes using saws, chisels, and planes. - Verifies accuracy of structure with transit, plumb bob, square and level. - Uses carpentry hand tools such as hammers, levels, squares, screw drivers, adjustable, wrenches, hand and power saws, drill motors and pry bars. - Nails cleats (braces) across boards to construct concrete-supporting forms. - Braces forms in place with timbers, tie rods, and anchor bolts for use in building concrete piers, footings, and walls. - Erects frame work for structures and lays sub-flooring. - Cuts and assembles timbers to build trestles and cofferdams. - Erects scaffolding for buildings and other structures and installs ladders, handrails, walkways, platforms, and gangways. - Constructs forms, chutes, and aligns form panels for pouring concrete and grout. - Fits and installs pre-fabricated window frames, doors, weather stripping interior and exterior trim and finished hardware. - Fits and nails sheathing on outer walls and roofs of buildings. Sets and braces anchor bolts. - Performs minor maintenance or cleaning activities with tools and equipment. - Ability to tie rebar. - Operation of electric and pneumatic tools. - May rig materials. - Responsible for observing and complying with all safety and project rules. Performs other duties as required.

**Requisition ID: 177419** Construct and repair structural woodwork and equipment in the yards, industrial and commercial property. **Experience Level** Skilled - Construct and repair structural wood work and equipment in the yard, industrial and commercial property - Work with materials such as wood, plastic, fiberglass, or drywall. - Utilize chisels, planes, saws, drills, and sanders to repair and erect structures. - Estimating sizes, distances, and quantities; or determining time, costs, resources, or materials needed to perform a work activity. - Inspect subordinate's work for compliance with the contract plans and specifications, point out deficiencies and explain and take any corrective action needed. **Qualifications** - Experience as a Carpenter Journyeman in a powerplant/industrial setting is required. - Must possess working knowledge skills and abilities for position. - Ability to understand, follow and transmit written and oral instructions and communicate effectively with management/supervision. - Ability to use hand tools, power tools and layout tools safe and efficiently. **Requirements** - The person in this position needs to constantly move about a construction/industrial site, so should be able to stand, walk, sit, reach, stoop, kneel, crouch, and/or crawl - Constantly works in a construction environment and will be exposed to changing outdoor weather conditions - Work irregular hours, weekends, overtime and holidays as required - May be required to use ladders/mechanical platforms/manlifts/scaffold to access required equipment/work areas (may exceed 200 feet), so must be able to climb and maintain balance on formwork, steel formwork, stairs, ladders and scaffolds - Move and work in and around confined and cluttered places, and uneven surfaces - Must be able to complete tasks in a noisy and dusty environment - May be required/able to move items weighing up to 50 pounds across construction/industrial site - Must have required tools - Observe and comply with all safety and project rules, perform other duties as required - Ability to pass pre-access drug and alcohol testing, fit for duty medical and background check Equal Opportunity Employer, including disability and protected veteran status. Company: TIC_Craft

Baldwin & Shell Construction Company is looking for a Carpenter who will thrive in our company. The Carpenter is responsible for constructing wood-based products, layouts, installations, repairing, finishing, and maintaining various structures such as buildings and fixtures. They must comply with local building codes, and health and safety regulations. The Carpenter reports directly to the Assistant Superintendent or Superintendent. Responsibilities: Read blueprints, drawings, and sketches to fully grasp requirements. Construct and install building frameworks, including walls, floors, and doorframes. Inspect and replace damaged framework or other structures and fixtures. Take measurements and calculate the size and amount of material needed. Cut, shape and smooth lumber and other material (e.g. fiberglass) according to measurements. Build window frames, doors, staircases, and frame buildings by using raw materials or pre-constructed items. Lay out flooring, roofing or drywall ensuring they are level and compatible. Carve and assemble furniture, cabinets, shelves, and other items and install them where designated. Inspect places and conduct repairs or maintenance. Build scaffolding and other construction structures. Minimum Qualifications: At least three (3) years of carpentry, construction, and hardware experience. Must have experience installing doors and hardware on commercial construction projects. Good communication skills. Knowledge of basic mathematics. Ability to take accurate measurements using and reading tape measures. Ability to read and interpret blueprints. Ability to operate tools, machines, and other equipment safely. Must be able to pass a background check and pre-employment drug test. Pursuant to the Arkansas Medical Marijuana Act 593, this position is a designated safety-sensitive position according to Baldwin & Shell standards and processes. Preferred Qualifications: Experience in commercial construction. Please note that this job description is not designed to cover or contain a comprehensive listing of the employee's activities, duties, or responsibilities required for this job. Duties, responsibilities, and activities may change at any time, with or without notice. What we offer: Highly competitive compensation 401(k) retirement with matching funds Health, Dental, and Vision insurance 8 Paid holidays Vacation accrual Short-term disability Maternity and Paternity Leave Pet insurance Free & confidential Employee Assistance Program Excellent work environment Baldwin & Shell is proud to offer highly competitive compensation, benefits package, and a family work environment! If you think you would thrive in this position, please apply with us today! For more information or questions, please reach out to our Human Resources Team: Email: ********************* ATTN: HR Phone: ************ Baldwin & Shell is a drug-free workplace and an E-Verify participant. Baldwin & Shell is proud to be a part of an Equal Opportunity Employer to include women, minorities, veterans, persons with disabilities, color, sex, sexual orientation, gender identity, religion, origin, and genetic information. All are encouraged to apply!

Job Summary: The Civil Journeyman Carpenter is responsible for constructing, erecting, installing, and repairing structures and fixtures of wood, plywood, and wallboard, using carpenter's hand tools and power tools. This position requires knowledge of structural design, the ability to read blueprints, and simple layouts, as well as knowledge of construction trade practices, procedures, techniques, tools, and equipment. Duties and responsibilities: Study specifications in blueprints, sketches, or building plans to prepare project layout and determine dimensions and materials required. Shape or cut materials to specified measurements using hand tools, machines, or power saws. Follow established safety rules and regulations and maintain a safe and clean environment. Erect and destruct concrete forms, scaffolding, and ramps above ground level. Remove damaged or defective parts or sections of structures and repair or replace, using hand tools. Maintain records, document actions, and present written progress reports. Construct forms or chutes for pouring concrete. Verify trueness of structure, set grade, check for plumb, etc. Mix, transfer and extend materials such as concrete and asphalt. Fabricate and install concrete reinforcing bars. Place and finish concrete. Maintain clean job site, pick up tools/equipment, secure job site each day-eliminate potential hazards. Other duties as assigned. Requirements Essential qualifications: Experience - 3+ years of Journeyman level experience. Working conditions: This position involves working outdoors in all weather conditions, including extreme heat and cold. Must be willing to work overtime and weekends as required. Travel may be required for this position. Physical requirements: The employee is regularly required to sit, use hands to finger, handle, or feel, and reach with hands and arms. The employee is frequently required to stand, walk, climb or balance, stoop, kneel, crouch, or crawl, talk or hear, and taste or smell. The employee must regularly lift and/or move up to 25 pounds and may frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Palacios Marine & Industrial is an equal opportunity employer prohibiting discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by law. This policy applies to all employment practices, including hiring, promotion, termination, compensation, and training. Hiring decisions are based solely on qualifications, merit, and business needs.

JobID: 9148 JobSchedule: Full time JobShift: : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Plan, lay-out and perform all types of Carpentry work in accordance with all applicable plans, specifications, codes, and industry standards. Work in other crafts at levels appropriate to training and skills as requested by project supervision. Job Summary Plan, lay-out and perform all types of Carpentry work in accordance with all applicable plans, specifications, codes, and industry standards. Work in other crafts at levels appropriate to training and skills as requested by project supervision. Key Responsibilities * Maintain positive working relationships with all members of the crew. * Produce high quality work, safely and productively at all times. * Provide feedback to ensure all materials, tools, equipment and information is available for the work. * Look for opportunities for improvement in all tasks, means and methods regarding the work and be willing to learn from others and continually seek opportunities to share knowledge and teach others. * High proficiency in all related trade mathematics. * Inspect subordinates work, ensure accuracy and compliance with plans and specifications, explain deficiencies and take any necessary corrective action. * Eliminate WASTE such as waiting, rework, transporting, material storage and time. Minimum Job Requirements * Must have a minimum of one year (level I), two years (level II), three years (level III) and four years (Sr.) experience in the industrial/commercial construction industry and have an in-depth understanding of the carpentry trade. * Must be able to read and understand drawings, specifications, safety and quality standards and effectively utilize all trade tools and equipment relevant to the work. * Possess effective verbal and written communication skills. Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements * Work up to a 12 hour shift doing hard physical work in varying temperatures and outside conditions. * Climb and maintain balance on steel/wood framework, stairs, ladders and scaffolds. * Will lift, push or pull objects up to 50lbs. on an occasional basis * Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis * Must be able to comply with all safety standards and procedures * May reach above shoulder heights and below the waist on a frequent basis * May stoop, kneel, or bend, on an occasional basis * Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) * Move in and around confined, cluttered and uneven areas. * May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt Inc. is an Equal Opportunity Employer (EOE) that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, religion, sex, sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, or genetic information. We recognize that diversity and inclusion is a driving force in the success of our company

SUMMARY Journeyman - Typically 3 years and above documented field experience in chosen craft discipline with ability to read and interpret instructions and document, plan and perform work activities independently. Constructs, fabricates, installs and dismantles form work of fixtures of metal, wood and other accessories. RESPONSIBILITES * Builds wooded structures, such as stairs, concrete forms, scaffolds, tunnel and sewer supports, and temporary frame shelters, according to blueprints, or oral instructions, and lays out and installs partitions and cabinet work. * Examines blueprints, sketches or building plans for to determine material required and dimensions of structure or fixture to be fabricated. * Selects, loads, and hauls job material to work site. * Prepares layout of form or fixture to be fabricated using lines or grades. * Measures boards, timbers, or plywood using square, measuring tape and ruler and marks cutting lines on materials using pencil and scriber. Shapes materials to required sizes using saws, chisels, and planes. * Verifies accuracy of structure with transit, plumb bob, square and level. * Uses carpentry hand tools such as hammers, levels, squares, screw drivers, adjustable, wrenches, hand and power saws, drill motors and pry bars. * Nails cleats (braces) across boards to construct concrete-supporting forms. * Braces forms in place with timbers, tie rods, and anchor bolts for use in building concrete piers, footings, and walls. * Erects frame work for structures and lays sub-flooring. * Cuts and assembles timbers to build trestles and cofferdams. * Erects scaffolding for buildings and other structures and installs ladders, handrails, walkways, platforms, and gangways. * Constructs forms, chutes, and aligns form panels for pouring concrete and grout. * Fits and installs pre-fabricated window frames, doors, weather stripping interior and exterior trim and finished hardware. * Fits and nails sheathing on outer walls and roofs of buildings. Sets and braces anchor bolts. * Performs minor maintenance or cleaning activities with tools and equipment. * Ability to tie rebar. * Operation of electric and pneumatic tools. * May rig materials. * Responsible for observing and complying with all safety and project rules. Performs other duties as required. JOB REQUIREMENTS * Work within precise limits or standards of accuracy. * Apply shop mathematics to solve problems. * Plan work and select proper tools. * Compare and see differences in the size, shape and form of lines, figures and objects. * Visualize objects in three dimensions from plans and drawings. * Make decisions based on measurable criteria. * Work at heights without fear. QUALIFICATIONS May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. PHYSICAL REQUIREMENTS 1. Strength: a. Standing 60% Walking 20% Sitting 20% b. Lifting 50 lb. Carrying 50 lb. Pushing 70 ft-lb. Pulling 70 ft-lb. 2. Climbing F Balancing F 3. Stooping O Kneeling O Crouching O Crawling O Reaching C Handling C Fingering F EXPLANATION OF SYMBOLS NP Not Present O Occasionally (0-33%) F Frequently (34-66%) C Constantly (67-100%) Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development.

REPORTS TO: Foreman A skilled carpenter involved in high level millwork that can be woodwork, casework, and/or ornamental metalwork. Duties & Responsibilities Installation of AWW, PL + Metal casework, fume hoods, DFH, misc. specialties. Preplanning: tools needed, materials, installation techniques that is the fastest and safest way possible. Safety Responsibilities: Responsible to follow and participate in the ISEC Safety Program and adhere to the ISEC Safety Promise. Perform their jobs in the safest manner prescribed - Never put themselves in harm's way. Conduct themselves in a way that enhances their personal safety and that of their coworkers contributing to a positive work environment. Report workplace hazards and make suggestions for their control. Use Stop Work Authority and respect Stop Work Authority on job. Cooperate and contribute toward the overall success of the safety program. Report all injuries and incidents as soon as possible. Preferred Qualifications Education/Experience Experience in casework, plastic laminate, and architectural millwork Knowledge/Skills Ability to read blueprints Supply personal tools Ability to work with minimal supervision Minimum Qualifications Education/Experience High School Education or Equivalent 3-5 years experience as a finished carpenter Union member where applicable Requirements: Workers should be able to: Physically, workers must be able to: Climb and maintain balance on ladders and scaffolds; Stoop, kneel, and crouch; Use hands and arms to reach for, handle, and manipulate objects; See well (either naturally or with correction); and lift and carry objects weighing up to 50 pounds.

Salary: Baldwin & Shell Construction Company is looking for a Carpenter who will thrive in our company. The Carpenter is responsible for constructing wood-based products, layouts, installations, repairing, finishing, and maintaining various structures such as buildings and fixtures. They must comply with local building codes, and health and safety regulations. The Carpenter reports directly to the Assistant Superintendent or Superintendent. Responsibilities: Read blueprints, drawings, and sketches to fully grasp requirements. Construct and install building frameworks, including walls, floors, and doorframes. Inspect and replace damaged framework or other structures and fixtures. Take measurements and calculate the size and amount of material needed. Cut, shape and smooth lumber and other material (e.g. fiberglass) according to measurements. Build window frames, doors, staircases, and frame buildings by using raw materials or pre-constructed items. Lay out flooring, roofing or drywall ensuring they are level and compatible. Carve and assemble furniture, cabinets, shelves, and other items and install them where designated. Inspect places and conduct repairs or maintenance. Build scaffolding and other construction structures. Minimum Qualifications: At least three (3) years of carpentry, construction, and hardware experience. Must have experience installing doors and hardware on commercial construction projects. Good communication skills. Knowledge of basic mathematics. Ability to take accurate measurements using and reading tape measures. Ability to read and interpret blueprints. Ability to operate tools, machines, and other equipment safely. Must be able to pass a background check and pre-employment drug test. Pursuant to the Arkansas Medical Marijuana Act 593, this position is a designated safety-sensitive position according to Baldwin & Shell standards and processes. Preferred Qualifications: Experience in commercial construction. Please note that this job description is not designed to cover or contain a comprehensive listing of the employee's activities, duties, or responsibilities required for this job. Duties, responsibilities, and activities may change at any time, with or without notice. What we offer: Highly competitive compensation 401(k) retirement with matching funds Health, Dental, and Vision insurance 8 Paid holidays Vacation accrual Short-term disability Maternity and Paternity Leave Pet insurance Free & confidential Employee Assistance Program Excellent work environment Baldwin & Shell is proud tooffer highly competitive compensation, benefits package, and a family work environment! If you think you would thrive in this position, please apply with us today! For more information or questions, please reach out to our Human Resources Team: Email: ********************* ATTN: HR Phone: ************ Baldwin & Shell is a drug-free workplace and an E-Verify participant. Baldwin & Shell is proud to be a part of an Equal Opportunity Employer to include women, minorities, veterans, persons with disabilities, color, sex, sexual orientation, gender identity, religion, origin, and genetic information. All are encouraged to apply!

As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Plan, lay-out and perform all types of Carpentry work in accordance with all applicable plans, specifications, codes, and industry standards. Work in other crafts at levels appropriate to training and skills as requested by project supervision. Job Summary Plan, lay-out and perform all types of Carpentry work in accordance with all applicable plans, specifications, codes, and industry standards. Work in other crafts at levels appropriate to training and skills as requested by project supervision. Key Responsibilities Maintain positive working relationships with all members of the crew. Produce high quality work, safely and productively at all times. Provide feedback to ensure all materials, tools, equipment and information is available for the work. Look for opportunities for improvement in all tasks, means and methods regarding the work and be willing to learn from others and continually seek opportunities to share knowledge and teach others. High proficiency in all related trade mathematics. Inspect subordinates work, ensure accuracy and compliance with plans and specifications, explain deficiencies and take any necessary corrective action. Eliminate WASTE such as waiting, rework, transporting, material storage and time. Minimum Job Requirements Must have a minimum of one year (level I), two years (level II), three years (level III) and four years (Sr.) experience in the industrial/commercial construction industry and have an in-depth understanding of the carpentry trade. Must be able to read and understand drawings, specifications, safety and quality standards and effectively utilize all trade tools and equipment relevant to the work. Possess effective verbal and written communication skills. Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements Work up to a 12 hour shift doing hard physical work in varying temperatures and outside conditions. Climb and maintain balance on steel/wood framework, stairs, ladders and scaffolds. Will lift, push or pull objects up to 50lbs. on an occasional basis Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis Must be able to comply with all safety standards and procedures May reach above shoulder heights and below the waist on a frequent basis May stoop, kneel, or bend, on an occasional basis Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) Move in and around confined, cluttered and uneven areas. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt Inc. is an Equal Opportunity Employer (EOE) that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, religion, sex, sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, or genetic information. We recognize that diversity and inclusion is a driving force in the success of our company

REPORTS TO: Foreman A skilled carpenter involved in high level millwork that can be woodwork, casework, and/or ornamental metalwork. Duties & Responsibilities Installation of AWW, PL + Metal casework, fume hoods, DFH, misc. specialties. Preplanning: tools needed, materials, installation techniques that is the fastest and safest way possible. Safety Responsibilities: Responsible to follow and participate in the ISEC Safety Program and adhere to the ISEC Safety Promise. Perform their jobs in the safest manner prescribed - Never put themselves in harm's way. Conduct themselves in a way that enhances their personal safety and that of their coworkers contributing to a positive work environment. Report workplace hazards and make suggestions for their control. Use Stop Work Authority and respect Stop Work Authority on job. Cooperate and contribute toward the overall success of the safety program. Report all injuries and incidents as soon as possible. Preferred Qualifications Education/Experience Experience in casework, plastic laminate, and architectural millwork Knowledge/Skills Ability to read blueprints Supply personal tools Ability to work with minimal supervision Minimum Qualifications Education/Experience High School Education or Equivalent 3-5 years experience as a finished carpenter Union member where applicable Requirements: Workers should be able to: Physically, workers must be able to: Climb and maintain balance on ladders and scaffolds; Stoop, kneel, and crouch; Use hands and arms to reach for, handle, and manipulate objects; See well (either naturally or with correction); and lift and carry objects weighing up to 50 pounds.

SUMMARY Journeyman - Typically 3 years and above documented field experience in chosen craft discipline with ability to read and interpret instructions and document, plan and perform work activities independently. Constructs, fabricates, installs and dismantles form work of fixtures of metal, wood and other accessories. RESPONSIBILITES - Builds wooded structures, such as stairs, concrete forms, scaffolds, tunnel and sewer supports, and temporary frame shelters, according to blueprints, or oral instructions, and lays out and installs partitions and cabinet work. - Examines blueprints, sketches or building plans for to determine material required and dimensions of structure or fixture to be fabricated. - Selects, loads, and hauls job material to work site. - Prepares layout of form or fixture to be fabricated using lines or grades. - Measures boards, timbers, or plywood using square, measuring tape and ruler and marks cutting lines on materials using pencil and scriber. Shapes materials to required sizes using saws, chisels, and planes. - Verifies accuracy of structure with transit, plumb bob, square and level. - Uses carpentry hand tools such as hammers, levels, squares, screw drivers, adjustable, wrenches, hand and power saws, drill motors and pry bars. - Nails cleats (braces) across boards to construct concrete-supporting forms. - Braces forms in place with timbers, tie rods, and anchor bolts for use in building concrete piers, footings, and walls. - Erects frame work for structures and lays sub-flooring. - Cuts and assembles timbers to build trestles and cofferdams. - Erects scaffolding for buildings and other structures and installs ladders, handrails, walkways, platforms, and gangways. - Constructs forms, chutes, and aligns form panels for pouring concrete and grout. - Fits and installs pre-fabricated window frames, doors, weather stripping interior and exterior trim and finished hardware. - Fits and nails sheathing on outer walls and roofs of buildings. Sets and braces anchor bolts. - Performs minor maintenance or cleaning activities with tools and equipment. - Ability to tie rebar. - Operation of electric and pneumatic tools. - May rig materials. - Responsible for observing and complying with all safety and project rules. Performs other duties as required.

REPORTS TO: Foreman A skilled carpenter involved in high level millwork that can be woodwork, casework, and/or ornamental metalwork. Duties & Responsibilities Installation of AWW, PL + Metal casework, fume hoods, DFH, misc. specialties. Preplanning: tools needed, materials, installation techniques that is the fastest and safest way possible. Safety Responsibilities: Responsible to follow and participate in the ISEC Safety Program and adhere to the ISEC Safety Promise. Perform their jobs in the safest manner prescribed - Never put themselves in harm's way. Conduct themselves in a way that enhances their personal safety and that of their coworkers contributing to a positive work environment. Report workplace hazards and make suggestions for their control. Use Stop Work Authority and respect Stop Work Authority on job. Cooperate and contribute toward the overall success of the safety program. Report all injuries and incidents as soon as possible. Preferred Qualifications Education/Experience Experience in casework, plastic laminate, and architectural millwork Knowledge/Skills Ability to read blueprints Supply personal tools Ability to work with minimal supervision Minimum Qualifications Education/Experience High School Education or Equivalent 3-5 years experience as a finished carpenter Union member where applicable Requirements: Workers should be able to: Physically, workers must be able to: Climb and maintain balance on ladders and scaffolds; Stoop, kneel, and crouch; Use hands and arms to reach for, handle, and manipulate objects; See well (either naturally or with correction); and lift and carry objects weighing up to 50 pounds.

SUMMARY Journeyman - Typically 3 years and above documented field experience in chosen craft discipline with ability to read and interpret instructions and document, plan and perform work activities independently. Constructs, fabricates, installs and dismantles form work of fixtures of metal, wood and other accessories. RESPONSIBILITES * Builds wooded structures, such as stairs, concrete forms, scaffolds, tunnel and sewer supports, and temporary frame shelters, according to blueprints, or oral instructions, and lays out and installs partitions and cabinet work. * Examines blueprints, sketches or building plans for to determine material required and dimensions of structure or fixture to be fabricated. * Selects, loads, and hauls job material to work site. * Prepares layout of form or fixture to be fabricated using lines or grades. * Measures boards, timbers, or plywood using square, measuring tape and ruler and marks cutting lines on materials using pencil and scriber. Shapes materials to required sizes using saws, chisels, and planes. * Verifies accuracy of structure with transit, plumb bob, square and level. * Uses carpentry hand tools such as hammers, levels, squares, screw drivers, adjustable, wrenches, hand and power saws, drill motors and pry bars. * Nails cleats (braces) across boards to construct concrete-supporting forms. * Braces forms in place with timbers, tie rods, and anchor bolts for use in building concrete piers, footings, and walls. * Erects frame work for structures and lays sub-flooring. * Cuts and assembles timbers to build trestles and cofferdams. * Erects scaffolding for buildings and other structures and installs ladders, handrails, walkways, platforms, and gangways. * Constructs forms, chutes, and aligns form panels for pouring concrete and grout. * Fits and installs pre-fabricated window frames, doors, weather stripping interior and exterior trim and finished hardware. * Fits and nails sheathing on outer walls and roofs of buildings. Sets and braces anchor bolts. * Performs minor maintenance or cleaning activities with tools and equipment. * Ability to tie rebar. * Operation of electric and pneumatic tools. * May rig materials. * Responsible for observing and complying with all safety and project rules. Performs other duties as required. JOB REQUIREMENTS * Work within precise limits or standards of accuracy. * Apply shop mathematics to solve problems. * Plan work and select proper tools. * Compare and see differences in the size, shape and form of lines, figures and objects. * Visualize objects in three dimensions from plans and drawings. * Make decisions based on measurable criteria. * Work at heights without fear. QUALIFICATIONS May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. PHYSICAL REQUIREMENTS 1. Strength: a. Standing 60% Walking 20% Sitting 20% b. Lifting 50 lb. Carrying 50 lb. Pushing 70 ft-lb. Pulling 70 ft-lb. 2. Climbing F Balancing F 3. Stooping O Kneeling O Crouching O Crawling O Reaching C Handling C Fingering F EXPLANATION OF SYMBOLS NP Not Present O Occasionally (0-33%) F Frequently (34-66%) C Constantly (67-100%) Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development.

SUMMARY Journeyman - Typically 3 years and above documented field experience in chosen craft discipline with ability to read and interpret instructions and document, plan and perform work activities independently. Constructs, fabricates, installs and dismantles form work of fixtures of metal, wood and other accessories. RESPONSIBILITES * Builds wooded structures, such as stairs, concrete forms, scaffolds, tunnel and sewer supports, and temporary frame shelters, according to blueprints, or oral instructions, and lays out and installs partitions and cabinet work. * Examines blueprints, sketches or building plans for to determine material required and dimensions of structure or fixture to be fabricated. * Selects, loads, and hauls job material to work site. * Prepares layout of form or fixture to be fabricated using lines or grades. * Measures boards, timbers, or plywood using square, measuring tape and ruler and marks cutting lines on materials using pencil and scriber. Shapes materials to required sizes using saws, chisels, and planes. * Verifies accuracy of structure with transit, plumb bob, square and level. * Uses carpentry hand tools such as hammers, levels, squares, screw drivers, adjustable, wrenches, hand and power saws, drill motors and pry bars. * Nails cleats (braces) across boards to construct concrete-supporting forms. * Braces forms in place with timbers, tie rods, and anchor bolts for use in building concrete piers, footings, and walls. * Erects frame work for structures and lays sub-flooring. * Cuts and assembles timbers to build trestles and cofferdams. * Erects scaffolding for buildings and other structures and installs ladders, handrails, walkways, platforms, and gangways. * Constructs forms, chutes, and aligns form panels for pouring concrete and grout. * Fits and installs pre-fabricated window frames, doors, weather stripping interior and exterior trim and finished hardware. * Fits and nails sheathing on outer walls and roofs of buildings. Sets and braces anchor bolts. * Performs minor maintenance or cleaning activities with tools and equipment. * Ability to tie rebar. * Operation of electric and pneumatic tools. * May rig materials. * Responsible for observing and complying with all safety and project rules. Performs other duties as required. JOB REQUIREMENTS * Work within precise limits or standards of accuracy. * Apply shop mathematics to solve problems. * Plan work and select proper tools. * Compare and see differences in the size, shape and form of lines, figures and objects. * Visualize objects in three dimensions from plans and drawings. * Make decisions based on measurable criteria. * Work at heights without fear. QUALIFICATIONS May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. PHYSICAL REQUIREMENTS 1. Strength: a. Standing 60% Walking 20% Sitting 20% b. Lifting 50 lb. Carrying 50 lb. Pushing 70 ft-lb. Pulling 70 ft-lb. 2. Climbing F Balancing F 3. Stooping O Kneeling O Crouching O Crawling O Reaching C Handling C Fingering F EXPLANATION OF SYMBOLS NP Not Present O Occasionally (0-33%) F Frequently (34-66%) C Constantly (67-100%) Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development.