Engineering Associate jobs at Comlux the Aviation Group - 70 jobs

Mechanical Engineering Co-op/Intern - Summer 2026 This reflects potential openings for the Summer 2026 Co-op/Internship Session (May-August). This is a general job description and represents multiple openings in various departments. Honda offers both single and multi-semester co-ops and internships. College students must apply to the requisition pertaining to their major and semester of interest. Please note: Sponsorship for employment visa status for these positions is unavailable. Applicants requiring sponsorship for employment visa status now or in the future (e.g., F-1 CPT/OPT, H-1B, TN, etc.) will not be considered. More about the Mechanical Engineering Co-op/ Intern at Honda The below descriptions reflect potential environments and duties within our various Mechanical Engineering Co-op/ Intern positions that we offer. Work environments and projects may include but are not limited to: Manufacturing: * Focus on equipment, process, quality and new model activities related to the department of placement (i.e Assembly department, Weld department, Paint department, Stamping department, Casting and Machining department, etc) * Project management * Problem analysis * Investigating new technologies and implementing countermeasure Quality: * Learning and performing vehicle testing * Conducting tests for chassis, brakes, controls, bonnet, trunk and/ or door systems * Testing procedures and fixtures * New model development, drawing, layouts and design change requests * Investigating and providing countermeasures for mass production design related issues * Warranty data trend analysis * Re-creating problem failures to determine root cause, develop countermeasures and perform confirmation testing Purchasing: * Assessing supplier process capabilities * Problem reporting and analysis. * Implementing countermeasures * Verifying and judging effectiveness * Investigating suspect part issues and approving part changes * Approving and verifying supplier countermeasures * Issuing trouble reports * Various daily tasks such as attending meetings, working on assigned project activities, problem analysis, writing technical reports, troubleshooting manufacturing or quality problems and communicating to internal/ external customers Facilities: * Updating and documenting Computer-Aided Design (CAD) drawings of existing infrastructure * Analyzing and designing existing sanitation, Heating, Ventilation, and Air Conditioning (HVAC) and building pressure systems * Developing short and long-term solutions to problems found * Designing modifications of existing facilities infrastructures * Updating mechanical engineering specifications and standards * Reviewing electrical drawings * Learning and understanding plant power infrastructure * Verifying electrical panel schedules * Updating highbay light location Tooling Equipment: * Designing manufacturing equipment and tooling in 2D and 3D Computer-Aided Design (CAD) systems * Determining equipment electrical hardware, software (Programmable Logic Controller (PLC), Human-Machine Interface (HMI), etc.), safety requirements and appropriate design * Managing a schedule and tracking daily processes * Investigating and troubleshooting problems during installation and manufacturing Research and Design: * Supporting the development of vehicle testing and countermeasure analysis (assisting with problem and data analysis, countermeasures, test set-up, data acquisition, test monitoring, recording activities, performance testing and reporting results) * Assisting design engineers in developing/ designing of future models and supporting the creation of drawings * Computer-Aided Design (CAD) Design * Cost and weight calculations * Attending meetings and working with various design/ test groups, suppliers, manufacturing groups, etc. What you need to be successful in this role Required: * Legally authorized to work in the U.S. without sponsorship * General Engineering Coursework * Minimum 2.5 Cumulative GPA or higher (You will be required to provide your current transcript) * Class status- Sophomore (by credit hour) or above * Availability to work a minimum of 10 weeks at 40 hours per week. * Enrollment in a bachelor's or master's degree program studying Mechanical Engineering or related field. * Valid U.S. Driver's License (exceptions considered on a case-by-case basis) * Ability to provide own transportation to and from work each day. Desired: Auto Computer Aided Design (AutoCAD), Computer-Aided Three-Dimensional Interactive Application (CATIA), Manufacturing related coursewor Position Locations Mechanical Engineering Co-op/Intern positions are offered in the cities/ states listed below, if you are selected to move forward in the process, you will be given the opportunity to make selections on your location preferences: * Anna, Ohio (45 minutes north of Dayton, Ohio) * Marysville, Ohio (45 minutes northwest of Columbus, Ohio) * Raymond, Ohio (45 minutes northwest of Columbus, Ohio) * East Liberty, Ohio (55 minutes northwest of Columbus, Ohio) * Russells Point, Ohio (30 minutes northwest of Marysville, Ohio) * Greensburg, Indiana (55 minutes southeast of Indianapolis, Indiana and 60 minutes northwest of Cincinnati, Ohio) * Lincoln, Alabama (45 minutes northeast of Birmingham, Alabama) * Timmonsville, South Carolina (20 minutes southwest of Florence, South Carolina) * Swepsonville, North Carolina (15 minutes SE of Burlington, North Carolina) Honda Co-operative and Learning Internships Program Benefits Housing Accommodations: Honda offers housing at a shared cost, or a housing stipend based on location for our Co-ops and Interns. It is not required to opt-in to but is available should you need housing at the time of your Co-op/ Internship with Honda. Honda Business Resource Groups: One of the ways Honda gives diversity a voice is through its business resource groups. The associate-led, company-supported groups have members aligned across different dimensions of diversity such as gender, ethnicity, ability, life stage and experiences. The groups provide networking opportunities, a chance to give back and professional development. Some groups have even given feedback on Honda products, making them more appealing to all. Embracing all views is what will drive us into the future. Honda wants passionate, driven people to be a part of that future. Performance Feedback: Honda Co-ops and Interns will have the opportunity to receive informal and formal feedback from their leaders, ask questions and express future interest in a scheduled mid-term and final evaluation. Mentorship: Each Co-op/ Intern is assigned a mentor in your department to help you navigate your time at Honda. On-site Wellness Center: Co-ops and Interns have access to join our Wellness Centers (varies by location). Our Wellness Centers are full gyms equipped with cardio machines, weights, basketball courts, pools, dieticians, personal trainers and group fitness classes. Paid overtime: Co-ops and Interns will receive 1.5 times their hourly rate of pay for any overtime worked. Hourly Wage Range: $27.22-$35.22 Pay will be based on several variables that include, but not limited to, geographic location, work experience, education, etc. Consideration for full time employment: Our Cooperative Learning Internships program is utilized as a talent pipeline for our full-time positions! Additional details regarding Honda Co-op and Intern benefits are provided upon offer.

Mechanical Engineering Co-op/Intern - Summer 2026 This reflects potential openings for the Summer 2026 Co-op/Internship Session (May-August). This is a general job description and represents multiple openings in various departments. Honda offers both single and multi-semester co-ops and internships. College students must apply to the requisition pertaining to their major and semester of interest. Please note: Sponsorship for employment visa status for these positions is unavailable. Applicants requiring sponsorship for employment visa status now or in the future (e.g., F-1 CPT/OPT, H-1B, TN, etc.) will not be considered. More about the Mechanical Engineering Co-op/ Intern at Honda The below descriptions reflect potential environments and duties within our various Mechanical Engineering Co-op/ Intern positions that we offer. Work environments and projects may include but are not limited to: Manufacturing: * Focus on equipment, process, quality and new model activities related to the department of placement (i.e Assembly department, Weld department, Paint department, Stamping department, Casting and Machining department, etc) * Project management * Problem analysis * Investigating new technologies and implementing countermeasure Quality: * Learning and performing vehicle testing * Conducting tests for chassis, brakes, controls, bonnet, trunk and/ or door systems * Testing procedures and fixtures * New model development, drawing, layouts and design change requests * Investigating and providing countermeasures for mass production design related issues * Warranty data trend analysis * Re-creating problem failures to determine root cause, develop countermeasures and perform confirmation testing Purchasing: * Assessing supplier process capabilities * Problem reporting and analysis. * Implementing countermeasures * Verifying and judging effectiveness * Investigating suspect part issues and approving part changes * Approving and verifying supplier countermeasures * Issuing trouble reports * Various daily tasks such as attending meetings, working on assigned project activities, problem analysis, writing technical reports, troubleshooting manufacturing or quality problems and communicating to internal/ external customers Facilities: * Updating and documenting Computer-Aided Design (CAD) drawings of existing infrastructure * Analyzing and designing existing sanitation, Heating, Ventilation, and Air Conditioning (HVAC) and building pressure systems * Developing short and long-term solutions to problems found * Designing modifications of existing facilities infrastructures * Updating mechanical engineering specifications and standards * Reviewing electrical drawings * Learning and understanding plant power infrastructure * Verifying electrical panel schedules * Updating highbay light location Tooling Equipment: * Designing manufacturing equipment and tooling in 2D and 3D Computer-Aided Design (CAD) systems * Determining equipment electrical hardware, software (Programmable Logic Controller (PLC), Human-Machine Interface (HMI), etc.), safety requirements and appropriate design * Managing a schedule and tracking daily processes * Investigating and troubleshooting problems during installation and manufacturing Research and Design: * Supporting the development of vehicle testing and countermeasure analysis (assisting with problem and data analysis, countermeasures, test set-up, data acquisition, test monitoring, recording activities, performance testing and reporting results) * Assisting design engineers in developing/ designing of future models and supporting the creation of drawings * Computer-Aided Design (CAD) Design * Cost and weight calculations * Attending meetings and working with various design/ test groups, suppliers, manufacturing groups, etc. What you need to be successful in this role Required: * Legally authorized to work in the U.S. without sponsorship * General Engineering Coursework * Minimum 2.5 Cumulative GPA or higher (You will be required to provide your current transcript) * Class status- Sophomore (by credit hour) or above * Availability to work a minimum of 10 weeks at 40 hours per week. * Enrollment in a bachelor's or master's degree program studying Mechanical Engineering or related field. * Valid U.S. Driver's License (exceptions considered on a case-by-case basis) * Ability to provide own transportation to and from work each day. Desired: Auto Computer Aided Design (AutoCAD), Computer-Aided Three-Dimensional Interactive Application (CATIA), Manufacturing related coursewor Position Locations Mechanical Engineering Co-op/Intern positions are offered in the cities/ states listed below, if you are selected to move forward in the process, you will be given the opportunity to make selections on your location preferences: * Anna, Ohio (45 minutes north of Dayton, Ohio) * Marysville, Ohio (45 minutes northwest of Columbus, Ohio) * Raymond, Ohio (45 minutes northwest of Columbus, Ohio) * East Liberty, Ohio (55 minutes northwest of Columbus, Ohio) * Russells Point, Ohio (30 minutes northwest of Marysville, Ohio) * Greensburg, Indiana (55 minutes southeast of Indianapolis, Indiana and 60 minutes northwest of Cincinnati, Ohio) * Lincoln, Alabama (45 minutes northeast of Birmingham, Alabama) * Timmonsville, South Carolina (20 minutes southwest of Florence, South Carolina) * Swepsonville, North Carolina (15 minutes SE of Burlington, North Carolina) Honda Co-operative and Learning Internships Program Benefits Housing Accommodations: Honda offers housing at a shared cost, or a housing stipend based on location for our Co-ops and Interns. It is not required to opt-in to but is available should you need housing at the time of your Co-op/ Internship with Honda. Honda Business Resource Groups: One of the ways Honda gives diversity a voice is through its business resource groups. The associate-led, company-supported groups have members aligned across different dimensions of diversity such as gender, ethnicity, ability, life stage and experiences. The groups provide networking opportunities, a chance to give back and professional development. Some groups have even given feedback on Honda products, making them more appealing to all. Embracing all views is what will drive us into the future. Honda wants passionate, driven people to be a part of that future. Performance Feedback: Honda Co-ops and Interns will have the opportunity to receive informal and formal feedback from their leaders, ask questions and express future interest in a scheduled mid-term and final evaluation. Mentorship: Each Co-op/ Intern is assigned a mentor in your department to help you navigate your time at Honda. On-site Wellness Center: Co-ops and Interns have access to join our Wellness Centers (varies by location). Our Wellness Centers are full gyms equipped with cardio machines, weights, basketball courts, pools, dieticians, personal trainers and group fitness classes. Paid overtime: Co-ops and Interns will receive 1.5 times their hourly rate of pay for any overtime worked. Hourly Wage Range: $27.22-$35.22 Pay will be based on several variables that include, but not limited to, geographic location, work experience, education, etc. Consideration for full time employment: Our Cooperative Learning Internships program is utilized as a talent pipeline for our full-time positions! Additional details regarding Honda Co-op and Intern benefits are provided upon offer.

As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. We are seeking a motivated and detail-oriented Mechanical Engineer Intern to join our engineering team. This internship offers hands-on experience in mechanical design, testing, and analysis, providing valuable exposure to real-world engineering challenges and solutions. Key Responsibilities Assist in the design, modeling, and drafting of mechanical components and systems using CAD software. Support testing and validation of mechanical systems, including data collection and analysis. Collaborate with engineers and cross-functional teams on product development and improvement projects. Conduct research and benchmarking to support design decisions and innovation. Help prepare technical documentation, reports, and presentations. Qualifications Currently pursuing a degree in Mechanical Engineering or a related field. Basic knowledge of mechanical design principles and engineering fundamentals. Familiarity with CAD tools such as SolidWorks, AutoCAD, or similar. Strong analytical and problem-solving skills. Effective communication and teamwork abilities. Eagerness to learn and contribute in a collaborative environment. What You'll Gain Practical experience in mechanical engineering and product development. Exposure to industry-standard tools, processes, and best practices. Mentorship from experienced engineers. Opportunity to work on meaningful projects that contribute to company goals. Pay Range: - We offer a comprehensive benefits package that may include medical, dental, vision, 401k matching, and more! Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. We are looking for a curious and driven Automation Engineer Intern to join our team. In this role, you will support the development and implementation of automation solutions that streamline processes, improve efficiency, and reduce manual effort across various functions. Key Responsibilities Assist in identifying repetitive tasks and processes suitable for automation. Support the design, development, testing, and deployment of automation scripts or workflows. Collaborate with team members to gather requirements and document automation use cases. Troubleshoot and resolve issues in existing automation solutions. Maintain clear documentation for all automation processes and tools. Qualifications Currently pursuing a degree in Computer Science, Engineering, Information Technology, or a related field. Basic knowledge of programming or scripting languages (e.g., Python, JavaScript, or similar). Familiarity with automation tools or platforms is a plus (e.g., Power Automate, UiPath, Selenium). Strong analytical and problem-solving skills. Good communication and collaboration abilities. Willingness to learn and adapt in a dynamic environment. What You'll Gain Hands-on experience with real-world automation projects. Exposure to industry-standard tools and best practices. Mentorship and guidance from experienced professionals. Opportunity to contribute to meaningful improvements in business operations. Pay Range: - We offer a comprehensive benefits package that may include medical, dental, vision, 401k matching, and more! Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

Mechanical Engineering Co-op/Intern - Summer 2026 This reflects potential openings for the Summer 2026 Co-op/Internship Session (May-August). This is a general job description and represents multiple openings in various departments. Honda offers both single and multi-semester co-ops and internships. College students must apply to the requisition pertaining to their major and semester of interest. Please note: Sponsorship for employment visa status for these positions is unavailable. Applicants requiring sponsorship for employment visa status now or in the future (e.g., F-1 CPT/OPT, H-1B, TN, etc.) will not be considered. More about the Mechanical Engineering Co-op/ Intern at Honda The below descriptions reflect potential environments and duties within our various Mechanical Engineering Co-op/ Intern positions that we offer. Work environments and projects may include but are not limited to: Manufacturing: * Focus on equipment, process, quality and new model activities related to the department of placement (i.e Assembly department, Weld department, Paint department, Stamping department, Casting and Machining department, etc) * Project management * Problem analysis * Investigating new technologies and implementing countermeasure Quality: * Learning and performing vehicle testing * Conducting tests for chassis, brakes, controls, bonnet, trunk and/ or door systems * Testing procedures and fixtures * New model development, drawing, layouts and design change requests * Investigating and providing countermeasures for mass production design related issues * Warranty data trend analysis * Re-creating problem failures to determine root cause, develop countermeasures and perform confirmation testing Purchasing: * Assessing supplier process capabilities * Problem reporting and analysis. * Implementing countermeasures * Verifying and judging effectiveness * Investigating suspect part issues and approving part changes * Approving and verifying supplier countermeasures * Issuing trouble reports * Various daily tasks such as attending meetings, working on assigned project activities, problem analysis, writing technical reports, troubleshooting manufacturing or quality problems and communicating to internal/ external customers Facilities: * Updating and documenting Computer-Aided Design (CAD) drawings of existing infrastructure * Analyzing and designing existing sanitation, Heating, Ventilation, and Air Conditioning (HVAC) and building pressure systems * Developing short and long-term solutions to problems found * Designing modifications of existing facilities infrastructures * Updating mechanical engineering specifications and standards * Reviewing electrical drawings * Learning and understanding plant power infrastructure * Verifying electrical panel schedules * Updating highbay light location Tooling Equipment: * Designing manufacturing equipment and tooling in 2D and 3D Computer-Aided Design (CAD) systems * Determining equipment electrical hardware, software (Programmable Logic Controller (PLC), Human-Machine Interface (HMI), etc.), safety requirements and appropriate design * Managing a schedule and tracking daily processes * Investigating and troubleshooting problems during installation and manufacturing Research and Design: * Supporting the development of vehicle testing and countermeasure analysis (assisting with problem and data analysis, countermeasures, test set-up, data acquisition, test monitoring, recording activities, performance testing and reporting results) * Assisting design engineers in developing/ designing of future models and supporting the creation of drawings * Computer-Aided Design (CAD) Design * Cost and weight calculations * Attending meetings and working with various design/ test groups, suppliers, manufacturing groups, etc. What you need to be successful in this role Required: * Legally authorized to work in the U.S. without sponsorship * General Engineering Coursework * Minimum 2.5 Cumulative GPA or higher (You will be required to provide your current transcript) * Class status- Sophomore (by credit hour) or above * Availability to work a minimum of 10 weeks at 40 hours per week. * Enrollment in a bachelor's or master's degree program studying Mechanical Engineering or related field. * Valid U.S. Driver's License (exceptions considered on a case-by-case basis) * Ability to provide own transportation to and from work each day. Desired: Auto Computer Aided Design (AutoCAD), Computer-Aided Three-Dimensional Interactive Application (CATIA), Manufacturing related coursewor Position Locations Mechanical Engineering Co-op/Intern positions are offered in the cities/ states listed below, if you are selected to move forward in the process, you will be given the opportunity to make selections on your location preferences: * Anna, Ohio (45 minutes north of Dayton, Ohio) * Marysville, Ohio (45 minutes northwest of Columbus, Ohio) * Raymond, Ohio (45 minutes northwest of Columbus, Ohio) * East Liberty, Ohio (55 minutes northwest of Columbus, Ohio) * Russells Point, Ohio (30 minutes northwest of Marysville, Ohio) * Greensburg, Indiana (55 minutes southeast of Indianapolis, Indiana and 60 minutes northwest of Cincinnati, Ohio) * Lincoln, Alabama (45 minutes northeast of Birmingham, Alabama) * Timmonsville, South Carolina (20 minutes southwest of Florence, South Carolina) * Swepsonville, North Carolina (15 minutes SE of Burlington, North Carolina) Honda Co-operative and Learning Internships Program Benefits Housing Accommodations: Honda offers housing at a shared cost, or a housing stipend based on location for our Co-ops and Interns. It is not required to opt-in to but is available should you need housing at the time of your Co-op/ Internship with Honda. Honda Business Resource Groups: One of the ways Honda gives diversity a voice is through its business resource groups. The associate-led, company-supported groups have members aligned across different dimensions of diversity such as gender, ethnicity, ability, life stage and experiences. The groups provide networking opportunities, a chance to give back and professional development. Some groups have even given feedback on Honda products, making them more appealing to all. Embracing all views is what will drive us into the future. Honda wants passionate, driven people to be a part of that future. Performance Feedback: Honda Co-ops and Interns will have the opportunity to receive informal and formal feedback from their leaders, ask questions and express future interest in a scheduled mid-term and final evaluation. Mentorship: Each Co-op/ Intern is assigned a mentor in your department to help you navigate your time at Honda. On-site Wellness Center: Co-ops and Interns have access to join our Wellness Centers (varies by location). Our Wellness Centers are full gyms equipped with cardio machines, weights, basketball courts, pools, dieticians, personal trainers and group fitness classes. Paid overtime: Co-ops and Interns will receive 1.5 times their hourly rate of pay for any overtime worked. Hourly Wage Range: $27.22-$35.22 Pay will be based on several variables that include, but not limited to, geographic location, work experience, education, etc. Consideration for full time employment: Our Cooperative Learning Internships program is utilized as a talent pipeline for our full-time positions! Additional details regarding Honda Co-op and Intern benefits are provided upon offer.

About Us AGE Solutions is a premier technology and professional services company, providing in-depth consulting, advanced technology solutions, and essential services throughout the U.S. government, defense, and intelligence sectors. Prioritizing innovation and client-focused solutions, we assist major agencies in addressing intricate issues and ensuring a more secure future. AGE Solutions is seeking an Engineering Subject Matter Specialist to provide technical knowledge and analysis of highly specialized applications and operational environment along with systems analysis, design, integration, documentation, and implementation advice on complex problems and systems on the Local Area Network (LAN). Responsibilities Include: Provide technical knowledge and analysis of highly specialized applications and operational environment, high-level functional systems analysis, design, integration, documentation, and implementation advice on exceptionally complex problems that necessitate high-level knowledge of the subject matter for effective implementation. Participate in all phases of software development with emphasis on the planning, analysis, modeling, simulation, testing, integration, documentation and presentation phases. Required Skills, Qualifications and Experience: Experience: Must have 10+ years of relevant experience. Certifications: Must have and maintain a compliant DoD 8570 IAT or IAM Level II Certification, such as Security+CE. Must have and maintain a valid Computing Environment certification, such as CCNP or CCNP-E. Citizenship and Clearance: US Citizenship is required DoD Top Secret Clearance. Education: High School Diploma. Preferred Qualifications: DoD/DLA Experience. Work Environment and Physical Demand: Prolonged periods of working at a computer. Compensation: $120,000 - $135,000 This position is part of a pipeline for a future opportunity supporting a DoD customer. Employment is contingent upon contract award and government customer approval. AGE Solutions is actively engaging talent ahead of award and encourages both current incumbents and new candidates to express interest. At AGE Solutions, we reward performance, invest in growth, and share success. Our benefits support the whole person, professionally, financially, and personally. 26 Days Paid Leave: Includes vacation, sick, personal time, and holidays. You choose how to use it. Performance Bonuses: Performance bonuses are awarded based on individual contributions and company-wide results, aligning recognition with impact. 401(k) with Match: We match 3% of your contributions with immediate vesting. Financial Protection: Company-paid life insurance up to $300K and options for additional coverage for you and your dependents. Health Benefits: Multiple medical plans, dental, vision, FSA and HSA options to fit your needs. Parental Leave: 15 days of fully paid leave for new parents, because family matters. Military Differential Pay: We bridge the gap for employees on active duty, so they don't take a financial hit while serving. Professional Growth: Paid training and certifications, tuition reimbursement, and the tools and tech to get the job done right. Shared Success: In the event of a company sale, our CEO has committed to returning 80% of net proceeds to employees. This ensures our team shares in the long term value they help create. At AGE, you'll do work that matters, supported by a company that delivers for its people.

Mechanical Engineering Co-op/Intern - Summer 2026 This reflects potential openings for the Summer 2026 Co-op/Internship Session (May-August). This is a general job description and represents multiple openings in various departments. Honda offers both single and multi-semester co-ops and internships. College students must apply to the requisition pertaining to their major and semester of interest. Please note: Sponsorship for employment visa status for these positions is unavailable. Applicants requiring sponsorship for employment visa status now or in the future (e.g., F-1 CPT/OPT, H-1B, TN, etc.) will not be considered. More about the Mechanical Engineering Co-op/ Intern at Honda The below descriptions reflect potential environments and duties within our various Mechanical Engineering Co-op/ Intern positions that we offer. Work environments and projects may include but are not limited to: Manufacturing: * Focus on equipment, process, quality and new model activities related to the department of placement (i.e Assembly department, Weld department, Paint department, Stamping department, Casting and Machining department, etc) * Project management * Problem analysis * Investigating new technologies and implementing countermeasure Quality: * Learning and performing vehicle testing * Conducting tests for chassis, brakes, controls, bonnet, trunk and/ or door systems * Testing procedures and fixtures * New model development, drawing, layouts and design change requests * Investigating and providing countermeasures for mass production design related issues * Warranty data trend analysis * Re-creating problem failures to determine root cause, develop countermeasures and perform confirmation testing Purchasing: * Assessing supplier process capabilities * Problem reporting and analysis. * Implementing countermeasures * Verifying and judging effectiveness * Investigating suspect part issues and approving part changes * Approving and verifying supplier countermeasures * Issuing trouble reports * Various daily tasks such as attending meetings, working on assigned project activities, problem analysis, writing technical reports, troubleshooting manufacturing or quality problems and communicating to internal/ external customers Facilities: * Updating and documenting Computer-Aided Design (CAD) drawings of existing infrastructure * Analyzing and designing existing sanitation, Heating, Ventilation, and Air Conditioning (HVAC) and building pressure systems * Developing short and long-term solutions to problems found * Designing modifications of existing facilities infrastructures * Updating mechanical engineering specifications and standards * Reviewing electrical drawings * Learning and understanding plant power infrastructure * Verifying electrical panel schedules * Updating highbay light location Tooling Equipment: * Designing manufacturing equipment and tooling in 2D and 3D Computer-Aided Design (CAD) systems * Determining equipment electrical hardware, software (Programmable Logic Controller (PLC), Human-Machine Interface (HMI), etc.), safety requirements and appropriate design * Managing a schedule and tracking daily processes * Investigating and troubleshooting problems during installation and manufacturing Research and Design: * Supporting the development of vehicle testing and countermeasure analysis (assisting with problem and data analysis, countermeasures, test set-up, data acquisition, test monitoring, recording activities, performance testing and reporting results) * Assisting design engineers in developing/ designing of future models and supporting the creation of drawings * Computer-Aided Design (CAD) Design * Cost and weight calculations * Attending meetings and working with various design/ test groups, suppliers, manufacturing groups, etc. What you need to be successful in this role Required: * Legally authorized to work in the U.S. without sponsorship * General Engineering Coursework * Minimum 2.5 Cumulative GPA or higher (You will be required to provide your current transcript) * Class status- Sophomore (by credit hour) or above * Availability to work a minimum of 10 weeks at 40 hours per week. * Enrollment in a bachelor's or master's degree program studying Mechanical Engineering or related field. * Valid U.S. Driver's License (exceptions considered on a case-by-case basis) * Ability to provide own transportation to and from work each day. Desired: Auto Computer Aided Design (AutoCAD), Computer-Aided Three-Dimensional Interactive Application (CATIA), Manufacturing related coursewor Position Locations Mechanical Engineering Co-op/Intern positions are offered in the cities/ states listed below, if you are selected to move forward in the process, you will be given the opportunity to make selections on your location preferences: * Anna, Ohio (45 minutes north of Dayton, Ohio) * Marysville, Ohio (45 minutes northwest of Columbus, Ohio) * Raymond, Ohio (45 minutes northwest of Columbus, Ohio) * East Liberty, Ohio (55 minutes northwest of Columbus, Ohio) * Russells Point, Ohio (30 minutes northwest of Marysville, Ohio) * Greensburg, Indiana (55 minutes southeast of Indianapolis, Indiana and 60 minutes northwest of Cincinnati, Ohio) * Lincoln, Alabama (45 minutes northeast of Birmingham, Alabama) * Timmonsville, South Carolina (20 minutes southwest of Florence, South Carolina) * Swepsonville, North Carolina (15 minutes SE of Burlington, North Carolina) Honda Co-operative and Learning Internships Program Benefits Housing Accommodations: Honda offers housing at a shared cost, or a housing stipend based on location for our Co-ops and Interns. It is not required to opt-in to but is available should you need housing at the time of your Co-op/ Internship with Honda. Honda Business Resource Groups: One of the ways Honda gives diversity a voice is through its business resource groups. The associate-led, company-supported groups have members aligned across different dimensions of diversity such as gender, ethnicity, ability, life stage and experiences. The groups provide networking opportunities, a chance to give back and professional development. Some groups have even given feedback on Honda products, making them more appealing to all. Embracing all views is what will drive us into the future. Honda wants passionate, driven people to be a part of that future. Performance Feedback: Honda Co-ops and Interns will have the opportunity to receive informal and formal feedback from their leaders, ask questions and express future interest in a scheduled mid-term and final evaluation. Mentorship: Each Co-op/ Intern is assigned a mentor in your department to help you navigate your time at Honda. On-site Wellness Center: Co-ops and Interns have access to join our Wellness Centers (varies by location). Our Wellness Centers are full gyms equipped with cardio machines, weights, basketball courts, pools, dieticians, personal trainers and group fitness classes. Paid overtime: Co-ops and Interns will receive 1.5 times their hourly rate of pay for any overtime worked. Hourly Wage Range: $27.22-$35.22 Pay will be based on several variables that include, but not limited to, geographic location, work experience, education, etc. Consideration for full time employment: Our Cooperative Learning Internships program is utilized as a talent pipeline for our full-time positions! Additional details regarding Honda Co-op and Intern benefits are provided upon offer.

POSTING TYPE: Open-competitive Internship or Summer Employment Opportunity DEPARTMENT: Environmental Resources HOURS: Temporary, full-time HIRING RANGE: $19.00 - $22.00/dependent on education and skills CLOSE DATE: This posting will remain open until the position is filled. Apply early as the first review of applications will occur on January 16, 2026. The Water Resources Engineering Intern is responsible for performing a variety of semi-skilled to skilled tasks in construction observation, report writing, watershed modeling, CAD work, environmental assessments, and other areas for Water Resources related projects. This position is within the Water Resources unit of the Dakota County Environmental Resources Department. The position will require in-office and field work throughout the County, with the ability to work remotely from home as approved by the Water Resources Project Supervisor. This is a great opportunity for students to explore their interests and gain work experience in the Water Resources Engineering field. This position will last approximately 3-4 months during the summer season. Candidates who are interested in a formal internship are responsible for making arrangements with their university/college. Candidates must be able to occasionally work a flexible schedule, including early morning or evening hours. This position does not include benefits. * 2 years of completed coursework from an accredited college or university program in one of the following fields: environmental engineering, geological engineering, civil engineering/technician, construction engineering, hydrology, geology, environmental science, water resources science, earth science, geoscience, or a closely related field. AND * Valid driver's license Preferred Qualifications: * Previous engineering, science, or technical internships. * Direct experience, education, and/or training with Geographic Information Systems (GIS). * Direct experience, education, and/or training related to construction site erosion and sediment control inspections. These examples do not include all possible tasks in this work and do not limit the assignment of related tasks in any position of this classification. Regular attendance according to the position's management approved work schedule is required for all positions. 1. Complete routine lake sampling at the Lebanon Hills Regional Park Chain of Lakes for eutrophication standards while maintaining the water quality database and provide data deliverables to the Parks Department. 2. Complete routine lake sampling at County beaches. 3. Assist the Water Resources Engineer with drafting, modeling and design efforts and tasks necessary for stormwater projects occurring in transportation, parks and other various departments. 4. Provide site inspection and construction inspection services to assist the Water Resources Project Supervisor on various construction observation and compliance tasks on County projects. 5. Complete comprehensive watershed delineation utilizing watershed delineation tools in Geographic Information Systems (GIS). 6. Assist the Environmental Assessment Program with grant administration, grant writing, data gathering, data evaluation, coalition and partnership development, and communications relating to both grantee and grantor relationships and activities. 7. Assist the Environmental Assessment Program with project selection, work plan preparation, data collection and management, consultant oversight, field work, project management and other project-related activities. 8. Assist the septic system regulatory program with compliance needs, inspections, data management, and regulatory requirements. 9. Assist water resources working groups with data gathering and public education opportunities. 10. Assist the Senior Water Resources Engineer with completion of monthly inspections at the Byllesby Dam for instrumentation and other various monitoring field tasks. 11. Work as part of multi-department project teams which could include Project Managers, Technicians, Engineers, Geologists, Scientists, Planners and Regulators. Day-to-day activities will include field data collection, data and database importing, and data analysis; GIS analysis and map generation; report writing and reviewing; and team meetings and conference calls. ESSENTIAL JOB FUNCTIONS: Duties 1 - 11 are essential functions as well as regular attendance according to the position's management-approved work schedule.• Excellent verbal and written interpersonal communication skills. * Mathematically competent and science literate. * Exceptional work ethic, reliable and consistent performance and attendance. * Fluency in modern office software programs (e.g., Microsoft Word, Excel, PowerPoint, Outlook) * Working knowledge of database computer software programs (e.g., Microsoft Office-Access) and other engineering related programs (e.g. AutoCAD, ArcGIS, HEC-RAS, HydroCAD, HY-8) * Positive attitude and ability and desire to learn new technical skills quickly. * Self-motivated with a proclivity for problem solving. Work Environment Work is performed indoors and outdoors in Dakota County. The position will be based out of the Western Service Center in Apple Valley, Minnesota; however, the position also offers remote work from home and field work throughout the County. This position may require the ability to work outdoors in all weather and the ability to perform strenuous physical tasks on a daily basis. Selection Process * You submit an online application that includes supplemental questions * We assign you a score based on your qualifications * Top scoring candidates are referred to the hiring manager for interview consideration * We conduct interviews and reference checks before extending an offer * We extend an offer and conduct background checks

Hartzell Propeller, founded in 1917 and headquartered in Piqua, Ohio, is the global leader in advanced aircraft propeller design and manufacturing for general aviation. The company supports both piston-engine and turboprop aircraft and provides custom propulsion solutions for electric, hybrid-electric, and advanced air mobility programs. Hartzell has continued to expand its capabilities through strategic acquisitions, including Tanis Aircraft Products in 2021 and Whirlwind Propeller in 2024, strengthening its experimental market offerings. Since 2024, Hartzell has also enhanced its MRO (Maintenance, Repair, and Overhaul) presence through the acquisition of 9 separate MRO facilities across North America and Europe. In this role, you may gain hands-on experience across a variety of engineering functions within a technical organization. Responsibilities may include supporting designing the next generation of propeller hardware, mechanical or aerodynamic analysis, participating in shop and lab activities, and assisting with the fabrication and testing of components, assemblies, and functional prototypes. You may contribute to the design and build of tools, fixtures, and test apparatus, collect and analyze engineering data, and document results through technical reports. The role may also involve researching new technologies and materials, communicating findings to the team, and creating or updating engineering documentation such as bills of materials (BOMs), process specifications, standard work instructions, and tool sheets. We work with incoming co-ops to match their learning objectives with the right opportunity within the engineering department. Requirements Required Qualifications · Enrolled in accredited university and actively pursuing a degree in a Mechanical or Aerospace Engineering · Able to work 40 hours per week · Minimum 3.0 GPA on a 4.0 scale · A passion for aviation Behavioral Characteristics Adaptability - Maintains effectiveness when experiencing major changes in the work tasks or the work environment; adjusts effectively to work within new work structures, processes, requirements or cultures. Continuous Learning - Actively identifies new areas for learning; regularly creates and takes advantage of learning opportunities; uses newly gained knowledge and skill on the job and learning through their application. Innovation - Generates innovative solutions in work situations; tries different and novel ways to deal with work problems and opportunities. Manages Work - Effectively manages one's time and resources to ensure that work is completed efficiently. · Customer Focus- Making customers and their needs a primary focus of one's actions; developing and sustaining productive customer relationships. Contributes to Team Success - Actively participates as a member of a team to move the team toward the completion of goals. Hartzell Propeller has a pre-employment and random Federal Drug & Alcohol Testing requirement and tests for marijuana, cocaine, opioids, amphetamines and phencyclidine in addition to alcohol. Equal Opportunity Employer/Protected Veteran/Disability/E-Verify

Join American Structurepoint and become part of a team that goes the extra mile for our clients and communities. We live by our values - respect, staff development, results and family. Our team is encouraged to explore new ideas and turn our clients' dreams into reality. With exceptional benefits, training, and mentorship, we pave the way for a rewarding career. Ready for more than just a job? Explore opportunities with us and help improve the quality of life in the communities we serve. American Structurepoint's Road Group is seeking candidates to join us for our summer internship program in Cincinnati, OH! As a Road Intern, you'll work as part of a close-knit team on roadway projects for ODOT, cities, towns, and counties throughout Ohio. Most of your work will take place in the office, with occasional site visits, as you assist with quantity takeoffs, create construction plan sets using MicroStation OpenRoads Designer (ORD), prepare design documentation, and develop construction cost estimates. From large interstate and interchange projects to urban reconstructions, rural maintenance, and roundabouts, you'll gain hands-on experience across a wide variety of impactful transportation projects. This is more than just an internship-it's your opportunity to build technical skills, explore your future in civil engineering, and help shape Ohio's infrastructure. Why Intern with us: Intern Day: A two-day celebration with all interns from across our design centers Weekly Lunch & Learns: Learn about our different disciplines from real professionals Mentorship & Career Growth: Gain experience and build lasting professional connections Real Projects: Contribute to actual designs that impact your local community Future Opportunities: Stand out and come back for another summer or full-time post-graduation Scholarships & Networking: Exclusive opportunities and connections within the industry Responsibilities What you will do: Contribute to roadway design by working on design calculations, roadway layouts, drainage analysis, plan production, and quantity and cost estimates Gain hands-on experience with 3D modeling and work with tools like MicroStation/GEOPAK, Bluebeam, Microsoft Word, Excel, and PowerPoint Get involved in a wide variety of projects-everything from roundabouts and urban streets to rural roads, drainage improvements, and large interstate projects Other duties as assigned Qualifications Who you are: Student majoring in Civil Engineering, Construction Engineering, Transportation, Hydraulics, or a related program with a focus on Civil Engineering Reliable transportation to and from the office Strong work ethic, eagerness to learn, willingness to take on new challenges, and a collaborative mindset Options Apply for this job online Email this job to a friend Refer Sorry the Share function is not working properly at this moment. Please refresh the page and try again later. Share on your newsfeed American Structurepoint is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status or any other characteristic protected by law.

Join American Structurepoint and become part of a team that goes the extra mile for our clients and communities. We live by our values - respect, staff development, results and family. Our team is encouraged to explore new ideas and turn our clients' dreams into reality. With exceptional benefits, training, and mentorship, we pave the way for a rewarding career. Ready for more than just a job? Explore opportunities with us and help improve the quality of life in the communities we serve. American Structurepoint's Road Group is seeking candidates to join us for our summer internship program in Cincinnati, OH! As a Road Intern, you'll work as part of a close-knit team on roadway projects for ODOT, cities, towns, and counties throughout Ohio. Most of your work will take place in the office, with occasional site visits, as you assist with quantity takeoffs, create construction plan sets using MicroStation OpenRoads Designer (ORD), prepare design documentation, and develop construction cost estimates. From large interstate and interchange projects to urban reconstructions, rural maintenance, and roundabouts, you'll gain hands-on experience across a wide variety of impactful transportation projects. This is more than just an internship-it's your opportunity to build technical skills, explore your future in civil engineering, and help shape Ohio's infrastructure. Why Intern with us: Intern Day: A two-day celebration with all interns from across our design centers Weekly Lunch & Learns: Learn about our different disciplines from real professionals Mentorship & Career Growth: Gain experience and build lasting professional connections Real Projects: Contribute to actual designs that impact your local community Future Opportunities: Stand out and come back for another summer or full-time post-graduation Scholarships & Networking: Exclusive opportunities and connections within the industry Responsibilities What you will do: Contribute to roadway design by working on design calculations, roadway layouts, drainage analysis, plan production, and quantity and cost estimates Gain hands-on experience with 3D modeling and work with tools like MicroStation/GEOPAK, Bluebeam, Microsoft Word, Excel, and PowerPoint Get involved in a wide variety of projects-everything from roundabouts and urban streets to rural roads, drainage improvements, and large interstate projects Other duties as assigned Qualifications Who you are: Student majoring in Civil Engineering, Construction Engineering, Transportation, Hydraulics, or a related program with a focus on Civil Engineering Reliable transportation to and from the office Strong work ethic, eagerness to learn, willingness to take on new challenges, and a collaborative mindset American Structurepoint is an equal employer opportunity and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status or any other characteristic protected by law. Who you are: Student majoring in Civil Engineering, Construction Engineering, Transportation, Hydraulics, or a related program with a focus on Civil Engineering Reliable transportation to and from the office Strong work ethic, eagerness to learn, willingness to take on new challenges, and a collaborative mindset

We are seeking a talented and motivated Product Design Engineer - Aerospace to join our innovative team. In this position you will own the design details of aerospace components, with the main function of mechanical actuation on commercial and military platforms. Supports the product throughout the entire life cycle, from design proposal through product manufacturing. Creates engineering drawings, design / testing documents, and prototypes for qualification of the aerospace product. Responsible for updates, improvements, and maintenance of existing products. A key contributor of new business initiatives. Products include sliding control cables, ball bearing control cables, gearboxes, handle assemblies, spring cartridges, electro-mechanical actuators, and assemblies thereof. Responsibilities: * Manage the technical details of a new product development while communicating design information internally, with the customer, with suppliers, and with regulatory bodies (FAA) * Apply engineering knowledge of material selection, kinematics, stress analysis, manufacturing, and mechanical assembly. Electrical engineering background or knowledge is a plus * Develop detailed drawings of mechanical assemblies with assistance from drafters * Construct acceptance test procedures to validate proper assembly and functionality * Lead new product development and R&D projects with internal engineering laboratory * Create and participate in design reviews with manufacturing, quality engineers, and customers * Review engineering design changes and recommend modifications to minimize cost and improve ease of manufacturing * Prepare technical proposals to satisfy customer specification requirements * Estimate and maintain effective control of project cost and schedule * Active member of the material review board to disposition non-compliant product * Assist teams with problem solving and failure analysis * Work with team members to develop capable, cost effective manufacturing and assembly processes concurrent to product design activities to ensure robust designs are delivered to the customer * Perform other related duties as required and may be assigned Qualifications: * 5+ years of engineering experience * Team player and strong self-manager * Ability to understand data, and possess exceptional analytical and problem solving abilities * Demonstrated ability to be a 'hands-on' type individual, with the ability to interface with the production team and engineering lab * Ability to shift gears quickly and wear many hats * Must possess strong written and verbal communication skills * Action oriented and self-starters * Able to recognize opportunities for product improvements * Knowledge of and experience in the aerospace manufacturing businesses is a plus * Proficient with CAD software (SolidWorks preferred) * Understanding of Data Acquisition software (LabVIEW preferred) * Experience in machining, fixturing, and knowledge of CNC equipment is preferred * Experience with and proficient knowledge in use of computers, MS Office Suite, and Microsoft Office (Word, Excel) * Occasional travel - local, national and international around 5% Education: * Bachelor's degree in engineering (mechanical or aerospace preferred) Benefits: * Competitive pay based on experience * Health insurance coverage * Retirement plan options * Paid time off This position requires either a US Person (as defined in applicable export regulations) or a non-US person who is eligible to obtain required export authorization. An equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law. Benefits: * 401(k) * Dental insurance * Health insurance * Paid time off * Vision insurance Work Location: In person

We are excited to be adding a Product Design Engineer to the MAC Trailer Team. Our Product Design Engineering is a profession that requires technical skills, and experience in a manufacturing environment. What we offer you: Competitive Pay Career Growth Opportunities Clean Manufacturing Environment On-site Wellness Clinic Referral Bonus Program Medical, Dental, and Vision Plans Employee Assistance Program Employer Paid Life Insurance Long-term and Short-term Disability Legal Planning Theft Protection Critical Illness Coverage Accident Coverage 401k with Match Vacation Time Paid Holidays Prescription Safety Glass and Safety Shoe Program Employee Engagement Events Philanthropy Efforts Who we are: MAC Trailer is the nation's foremost manufacturer of dump, flatbed, and transfer trailers, straight truck bodies, dry bulk pneumatic tanks, and liquid tank trailers. The success of MAC Trailer can be attributed to a quality product built by quality people. This is why MAC Trailer invests in its people and facilities to create a safe, secure work environment with room for training and growth. If you're interested in being part of a diverse workforce in a supportive work environment, MAC Trailer is the place for you. Essential Duties and Responsibilities Design, model and create assemblies using CAD software. Issue and prepare detailed drawings, specifications for shop production. Responsible for trailer design development and continuous improvement of existing and future products. Define part numbers and assembly structures for input into Bills of Materials. Determine long lead time items for an advanced bill of materials for purchasing. Create and maintain all engineering procedures and documents. Engineering support for all internal departments, outside sales, and customers. Perform and have the ability to carry out basic engineering calculations. Determine requirements based on sales specs for overall engineering product design. Evaluating material cost and strategizing the most cost-effective means for production Determine legal requirements based on DOT regulations for final design. Confers with research and development and prepares design modifications as required. Evaluating material weights to manufacture a durable but light product. Qualifications, Education, and/or Experience To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education Requirement - 4-year Engineer Degree - Salary commensurate with experience Ability to read, analyze, and interpret common drawings and schematics. Ability to respond to common inquiries or complaints from customers, dealers, sales staff, supporting departments and management. Ability to effectively communicate information to top management, coworkers and all parties needing notified. Ability to define problems, collect data, establish facts, and draw valid conclusions. Computer skills essential to the position. Ability to manage time and multiple tasks at once. Physical Demands Office and Manufacturing Environment Stand and walk long periods of time -Frequent sitting, work at a computer for extended periods of time. Ability to work in a manufacturing environment, including being physically capable of maneuvering self throughout facility, Operations area, product, and equipment. EEOC Disclaimer MAC Trailer is an Equal Opportunity Employer. MAC Trailer does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need.

Full-time Description Q-Lab Corporation is currently seeking a Manufacturing Engineering Technician. Reporting to the Director of Manufacturing Engineering, this position would be responsible for fabricating, building, and wiring electro-mechanical test fixtures for Q-Lab manufacturing. Responsibilities: Fabricate, build, and wire electro-mechanical test fixtures for Q-Lab manufacturing Collaborate with Manufacturing Engineering and manufacturing teams on tooling designs Research, recommend, and source components (timers, switches, relays, wire) needed to build custom fixtures and tools Electrical and controls troubleshooting of existing custom machines, fixtures, and factory equipment Work with facility electricians to install electrical services for manufacturing equipment Document designs to help CAD department complete engineering drawings Self-design electrical systems with little design input from engineering Required Skills: Associates Degree in Engineering Technology or relevant work experience 10+ years of work experience in electrical and or mechanical device manufacturing Experience with industrial wiring methods and design Experience with Microsoft Office software Basic fabrication and machine shop skills Desired Skills: Industrial facilities electrical systems Laser, TIG and MIG welding skills Programming and operation of CNC sheet metal fabrication machinery Electrical PCB soldering and assembly PLC Programming (Click, Siemens, Campbell Scientific) Who We Are: Q-Lab Corporation is a global leader in providing material durability testing products. Since 1956, we have designed and manufactured laboratory test products such as weathering testers, light stability testers and corrosion testers. We also perform weathering and corrosion testing services, including both laboratory and natural exposure tests. We maintain a global presence with testing facilities located in the US and sales and distribution facilities located in England, Germany and China. Our world-class corporate headquarters and manufacturing facility are located in Westlake, Ohio. We Offer: Beautiful corporate headquarters conveniently located off I-90 in Westlake, Ohio. A Northeast Ohio Top Workplace environment - 11 years running! A proven track record of success. Excellent compensation package including profitability bonus and company-funded retirement plan. Comprehensive benefits: Health, Vision, Dental, Disability and Life. Generous Paid Time Off, and Holidays. Flexible, hybrid work schedule. Fun, friendly working atmosphere! Q-Lab does not accept unsolicited contact from recruitment agencies. Please view our policy here .

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. Job Posting External TROY PLANT - Monday - Thursday 6:00 AM to 4:20 PM Job Duties * Support current process technology and implement improvements to department/plant operations based upon manufacturing engineering analysis of existing operations compared to future requirements based on capacity, cost reduction, safety and/or risk avoidance opportunities. * Help to prepare project justification including recommendations, make-vs-buy analysis, layout, cost impact and schedule activities as required. Implementation of processes including equipment procurement, coordination of installation, process capability prove-out, training, process documentation, work standard measurement and production start-up. * Contribute to the product introduction process. * Review production problems as they are identified and implement solutions. Develop, implement and update documentation and training * Develop reports, project briefings and management presentations. Perform other duties as assigned. Minimum Qualifications * 8-15 years related experience * High School graduate or equivalent * Job requires employee to drive a personal vehicle to conduct company business < 20% per week (8 hours) and/or travel locally between company locations during scheduled workday. * Must demonstrate good communication skills amongst shop floor, support staff, and plant leadership. * Must be able to lead and execute small teams and projects. * Requires good organizational and interpersonal skills, and the ability to train others * Per 8-hour shift. Sit 8 hours and stand 0 hours. Typical office environment (low noise level, limited exposure hot/cold temperatures, dust, fumes, and vibrations). Regular interaction with others and performs a degree of independent work. Physical and mental demands are akin to the majority of office positions with prolonged periods of sitting and prolonged use of a computer/keyboard. Infrequent lifting, walking and climbing stairs. Occasional use of office equipment (copiers, printers, etc.). Preferred Qualifications * Certain technical skills and training such as CAD layout, geometric dimensioning and tolerance (GD&T), process capability theory and statistical process control (SPC) may be required. Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EOE Veterans/Disabilities Nearest Major Market: Dayton Nearest Secondary Market: Cincinnati Job Segment: Manufacturing Engineer, CAD, Drafting, Warehouse, Engineering, Manufacturing

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. Job Posting External TROY PLANT - Monday - Thursday 6:00 AM to 4:20 PM Job Duties Support current process technology and implement improvements to department/plant operations based upon manufacturing engineering analysis of existing operations compared to future requirements based on capacity, cost reduction, safety and/or risk avoidance opportunities. Help to prepare project justification including recommendations, make-vs-buy analysis, layout, cost impact and schedule activities as required. Implementation of processes including equipment procurement, coordination of installation, process capability prove-out, training, process documentation, work standard measurement and production start-up. Contribute to the product introduction process. Review production problems as they are identified and implement solutions. Develop, implement and update documentation and training Develop reports, project briefings and management presentations. Perform other duties as assigned. Minimum Qualifications 8-15 years related experience High School graduate or equivalent Job requires employee to drive a personal vehicle to conduct company business < 20% per week (8 hours) and/or travel locally between company locations during scheduled workday. Must demonstrate good communication skills amongst shop floor, support staff, and plant leadership. Must be able to lead and execute small teams and projects. Requires good organizational and interpersonal skills, and the ability to train others Per 8-hour shift. Sit 8 hours and stand 0 hours. Typical office environment (low noise level, limited exposure hot/cold temperatures, dust, fumes, and vibrations). Regular interaction with others and performs a degree of independent work. Physical and mental demands are akin to the majority of office positions with prolonged periods of sitting and prolonged use of a computer/keyboard. Infrequent lifting, walking and climbing stairs. Occasional use of office equipment (copiers, printers, etc.). Preferred Qualifications Certain technical skills and training such as CAD layout, geometric dimensioning and tolerance (GD&T), process capability theory and statistical process control (SPC) may be required. Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EOE Veterans/Disabilities

As an essential business, Anomatic produces innovative and sustainable packaging for today's biggest brands. By leveraging over five decades of manufacturing expertise and employing an extensive technologies portfolio, we design, manufacture, and finish incomparable stock and customized solutions for numerous markets. Position: Manufacturing Engineer Location: New Albany, OH Department: Engineering Reports to: Manufacturing Engineering Manager JOB SUMMARY Anomatic is a fully integrated supplier of cosmetic and personal care packaging, specializing in design, fabrication, anodizing, metallizing, injection molding, decorating, finishing, and assembly. The Manufacturing Engineer is a hands-on role responsible for optimizing and maintaining manufacturing processes, including stamping, degreasing, anodizing, injection molding, assembly, decorating, metalizing, waste treatment, and facility systems. The position emphasizes safety, operational excellence, quality, cost control, continuous improvement, and equipment reliability, requiring significant time on the plant floor. ESSENTIAL FUNCTIONS Resolves day-to-day production issues that may impede Anomatic's ability to ship quality products on time. Resolve issues that are typically multi-disciplinary in nature: process, chemical, mechanical, and/or electrical. Provide technical assistance to all manufacturing departments regarding the quality and/or performance of machinery, tooling, fixture, gauges, etc. Serve as liaison between production and engineering departments by developing and managing to implementation engineering change notices and process specifications pertaining to manufacturing processes and material specifications. Responsible for maintaining a safe workplace. This includes ensuring compliance with all federal, state, and local environmental and safety regulations. Identifies and implements manufacturing process changes in support of the plant's continuous improvement and productivity improvement objectives. Assists with engineering analyses including but not limited to manufacturing simulations of new processes, make or buy, outsourcing, and line balancing. Reviews project work from maintenance, automation/autoload technicians, and external contractors with appropriate follow up and ultimate accountability to successfully acceptance of the respective projects to production. Review and sustain Total Preventative Maintenance Program (TPM). Coordinate with cross functional team to ensure TPM is up to date. Review, provide feedback, and accountability on quality of TPM. Enact and improve on TPM system and software. Performs root cause analyses to determine causes of line defects and engages the appropriate organization to drive improvement in line yields. Support and execute Lean Manufacturing efforts, i.e. develop SOP, TWI, and standard work for machine and process controls, RIE actions, 5S methodologies. Manage and update site drawings, layouts P&IDs, and process flow diagrams. Perform other related duties as assigned. QUALIFICATIONS Bachelor's degree in a technical field or equivalent experience (engineering preferred) 5 to 10 years' experience with responsibility for manufacturing process support in a manufacturing environment. Must be an adept and experienced problem solver who is able to determine root cause of technical issues and implements effective solutions in a timely manner. Strong problem-solving skills with technical issues, determining root cause, and ability to implement timely solutions. Proficiency with machine automation and electrical trouble shooting. Experience working in a high volume 24/7 manufacturing environment, metal finishing experience preferred Skilled in cross-group collaboration, negotiation, and simplifying requirements. Demonstrated experience in lean problem-solving and continuous improvement Willingness to respond to urgent situations, including evenings and weekends Proficient in SolidWorks and/or AutoCad. Exposure to PLC programming for troubleshooting and repairs. PREFERRED 1-3 years in equipment reliability (maintenance or reliability engineering) Willingness to travel (up to 20%) Certification in problem-solving (Lean Six Sigma, Red X, etc.) Experienced in developing and implementing PFMEA/FMEA plans is highly valued. This plant is a primary anodizing plant utilizing chemical processing for production and wastewater treatment. Most processes involve chemical processing, fluid pumps, piping, chemical storage, mechanical conveyance and PLC, robot, or relay logic controls. High consideration will be used for candidates with some or all these experiences. Benefits you can expect from Anomatic: Competitive Pay and bonus Career Growth Health Coverage Starting Your First Day 401K with Company Match, to help save for the future Paid Time Off to Enjoy Family or Hobbies Gym Membership Reimbursements, to help you stay active Training, to help hone skills Many more! Anomatic takes pride in creating a safe and inclusive environment that encourages, supports, and celebrates the diverse voices of our employees and the communities in which they live. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. #1Anomatic

Accountable for developing, improving, and supporting all production processes associated with the launch, manufacture, and test of products in an assigned value stream or product line. Often works under the direction of a Process Engineer II or III. Essential Job Functions: * Provides technical support to assigned manufacturing areas (i.e., troubleshooting production issues). * Where necessary, will include development and programming of equipment automation such as PLCs, data acquisition software or similar manufacturing equipment control and/or automation systems. * Creates and maintains work instructions for product build (example: SOP, MI, etc ). * Develops, evaluates, and improves manufacturing processes while maintaining compliance to design specifications. * Creates and maintains methods, B.O.M.s, labor standards, in ERP system. * Actively participates in C.I., RCCA, PFMEA, and cost reductions / process improvements. * Review, approval and implementation of product design and technical documentation changes related to manufacturing. * Selection, construction (when appropriate), and validation of tooling, fixtures, gages, and equipment. * Work with product engineers and program managers to effectively launch product from design to production. * Work flow / cell design with a focus on waste reduction and process improvement. * Technical liaison between work force, suppliers, customers, quality, and design engineers related to manufacturing issues. * Assist as required to maintain compliance to industry standards (AS-9100, NADCAP). * Analysis of manufacturing variances to help identify key areas in need of improvement. Additional Duties: * Support supply chain and quality with supplier development activities as needed. * Support resolution of supplier quality issues as required. * Support customer/regulatory audits as necessary. * Support customer complaints & concerns within a defined value stream. * Provide support for Lean manufacturing and continuous improvement initiatives, companywide. * Other duties, reporting, special assignments, or projects as needed and assigned. * Must remain current with, and complete all required training as assigned. * Must adhere to Company Corporate EHS Policy and department, occupation, and task specific safety protocols, including but not limited to Personal Protective Equipment (PPE) requirements. Qualifications: * 0-5 years manufacturing or engineering experience. * Hands on troubleshooting & problem solving including statistical analysis. * Working knowledge of CAD software and 3D printing. * Excellent technical, written and oral communication skills. * Working knowledge of MS Office. * Preferred Qualifications: Knowledge of both manual and automated mechanical equipment for tooling, fixtures, and testing preferred,experience in lean manufacturing preferred, working knowledge of GD&T preferred, working knowledge of CAD software preferred, working knowledge of ERP (in particular BOM & Method creation & support) preferred. * Must submit to and satisfactorily pass any pre-employment screening required for employment with the Company. * Must take medical exams required by law, in conjunction with occupation specific activities, the physical work environment, and ongoing industrial hygiene sampling results. * Depending on assignment, may be required to use stairs, remain upright and/or seated for prolonged timeframes, intermittently reposition the body per various tasks performed, and use various tools and work-related supplies. * May be required to perform manual lifting activities, not to exceed a 40lb lift performed by one individual. Education: * Four year degree in engineering required (mechanical, electrical, aerospace, or manufacturing preferred) OR 8-10 years of progressive manufacturing job responsibility in lieu of degree.

What You'll Do As part of our dynamic manufacturing team, you'll play a key role in driving operational excellence and continuous improvement. Your responsibilities will include: Developing methods, tooling, and techniques to reduce setup time, changeovers, and equipment operation effort Implementing cycle time reduction strategies in bottleneck manufacturing cells Troubleshooting machining processes and PLC programs (Siemens & Allen Bradley) Modifying manufacturing processes to enhance safety, quality, cost efficiency, or accommodate design changes Supporting financial goals through budgeting, expenditure scheduling, and project budget management Managing capital projects: equipment specs, runoffs, installation, and contractor coordination Updating and maintaining equipment and production layout drawings Developing engineering solutions for recurring equipment/process failures Identifying and delivering departmental training to boost skill levels Reviewing and coordinating TPM, PM, proactive and predictive maintenance programs to maximize uptime Owning PFMEA, control plans, and process flows in collaboration with the Quality Engineer Supporting shop floor teams with problem-solving and standard work instruction development Managing external contractors for process and equipment improvements Collaborating across all levels to enhance machinery and manufacturing processes Leading Kaizen activities and documenting outcomes Understanding key environmental aspects and related operational controls What You'll NeedEssential: B.S. in Mechanical or Industrial Engineering (or related field) 2+ years of experience in high-volume machining, assembly, and automation Hands-on experience with Lean Enterprise methodologies Must be fluent in English Must be able to work and travel independently Desirable: Strong interpersonal, organizational, and communication skills Proficiency in MS Word, Excel, MfgPro, Kronos Why You'll Love Working Here Join a market-leading company with exciting growth potential Be part of innovative, new projects from the ground up Enjoy competitive salary and benefits in a financially stable environment Thrive in a long-term career with a company that values commitment and development