Welder jobs at Commercial Steel Erection Inc. - 168 jobs

**Requisition ID: 177944** Assist skilled craftsperson(s) by performing supportive duties as directed and will work under immediate supervision. The level and degree of job responsibilities and requirements vary depending on months of experience and assigned job step. **Experience Level** Entry **Primary Responsibilities and Duties** - Learn to plan, diagram and lay-out for pipe welder's work - Assist with the coordination of field labor crew for efficient installations - Position the weld set up, fit the piping and perform welds involving a high degree of precision independently - Assist with the lay-out, and assemble pipes accurately and according to production standards, quality requirements, safety requirements, code, design, and specifications - Assist with welding repairs and substandard welds - Assist with coordination of any Pre-Fabrication layout or installation - Assist with rigging of material - Learn to operate air arc gouger, grinder, stress relieving machine, and other industry machines, tools and equipment **Qualifications** - May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. - Must possess knowledge skills and abilities for position - Ability to understand, follow and transmit written and oral instructions and communicate effectively with management/supervision - Field experience in chosen craft discipline - Knowledge of the safe and efficient use of hand tools, power tools and layout tools. **Requirements** - Able to meet all physical requirements. - Must have all required tools - Expected to climb and work at heights and in confined spaces (may exceed 200 ft) - Able to work outdoors in all weather conditions - Able to work overtime, nights, and weekends as required by the workload - Observe and comply with all safety and project rules. Performs other duties as required. Equal Opportunity Employer, including disability and protected veteran status. Company: TIC_Craft

Job Duties & Responsibilities: * Develop complete understanding of contract plans and specifications and plan, lay-out, install and/or repair all types of pipe and/or similar tubular products in accordance with those plans and specifications. * Read and understand plans and specifications, including isometric and orthographic drawings. Visualize two dimensional drawings in three dimensions. * Follow established job-site safety and regulations and maintain a safe and clean work area. Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards. * Attend daily and weekly safety meetings and inspections. * Inspect work for compliance with the contract plans and specifications, point out deficiencies and explain, and take any corrective action needed. * Use appropriate hand and power tools to properly measure, cut, assemble, weld and install all types of pipe and/or similar tubular products; install supports, valves and other control equipment; test installed piping systems and install all other related items in accordance with the applicable plans and specifications; bolt, clamp or weld parts to secure in position for welding; weld components according to specific process and code. * Install all other items in accordance with the applicable plans and specifications. * Produce quality work, meeting requirements of plans, specifications and industry standards. * Perform all other job related duties as requested by supervisor. BL Harbert International is an EEO/Disabilities/Vets

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. About the Role: This position is for experienced welders who are able to use the necessary equipment for MIG and TIG welding of structures, enclosures, pipes, and other components, as well as general fabrication and refurbishment, and operating equipment and heavy machinery. Experienced welders who are able to perform open root welding. What You Will Do: * Plan sequences of welding operations and determine methods of welding to weld structural details and assemblies, using all available welding processes such as gas, electric arc, (GTAW), heli-arc, orbital, sigma and submerged arc welding. Perform setup incidental for welding operations, working from blueprints, sketches, other authorized documents and/or oral instructions. Weld any gauge materials where welded areas are subject to high pressure or extreme stress and where care must be taken to prevent leaks and cracks. * Weld flat, vertical or overhead areas, or in difficult positions and areas difficult of access. Recognize need for and pre-heat materials as necessary and minimize warpage by proper location of weld and stress relieving methods. Form and shape details, as required. Improvise welding aids such as paper templates, locating devices, holding blocks, etc. * Perform surface preparation of parts such as cleaning, sanding, grinding, polishing and some assembly of parts. Clean and dress welds including the cutting and repairing of unacceptable weld joints. * Check own work for conformance to specifications. Must pass and maintain required certifications. Use all necessary equipment, tools and materials required to perform work as a journeyman. Must be able to climb and weld from ladders, scaffolds roofs, and in pits. Maintain good shop practices. What You Have: * Must be able to pass multiple welder qualification tests * Minimum of three (3) years GTAW 2G and 3G experience in a production environment * Available to work any shift * Ability to perform simple computer operations, work from digital prints Desired Qualifications: * Three (3) to five (5) years of GTAW welding experience * Experience welding with precision fixturing * Ability to work overtime as needed Summary Pay Range: $32.52- $48.78 Compensation and benefits may vary depending on multiple individualized factors, job level, market, location, job-related knowledge, skills, individual performance, and experience. Please note that salary is only one component of total compensation at Caterpillar. Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. * Medical, dental, and vision benefits* * Paid time off plan (Vacation, Holidays, Volunteer, etc.)* * 401(k) savings plans* * Health Savings Account (HSA)* * Flexible Spending Accounts (FSAs)* * Health Lifestyle Programs* * Employee Assistance Program* * Voluntary Benefits and Employee Discounts* * Career Development* * Incentive bonus* * Disability benefits * Life Insurance * Parental leave * Adoption benefits * Tuition Reimbursement * Sign on bonus * These benefits also apply to part-time employees This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as H, L, TN, F, J, E, O. Posting Dates: Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

Hopkins | Lacy, the Mechanical, Electrical, Plumbing (MEP) division of Branch is searching for a Welder. Welders will weld metal components together to fabricate or repair products, such as piping, machine parts, plant equipment, motors and generators according to layouts, blueprints or work orders, using brazing and variety of arc and gas welding equipment. Duties/Responsibilities * Welds metal parts together using both gas welding and any combination of arc welding processes * Perform other welding related tasks, including thermal cutting and grinding * Repair/Maintain broken or installed components, fills holes and increases size of metal parts * Positions and clamps together components of fabricated metal products preparatory to welding * Attend to work assignment instructions or to supervisor's orders * Exercise critical thinking and reasoning skills * Execute work-place safety regulations * Gather/Collate/Classify information * Assist in the mentoring, training, and growth of other employee-owners Duties/Responsibilities Cont. Qualifications * High School Diploma or Equivalency * 2 years of prior welding experience * Driver's License Competencies Dependability Delivering High Quality Work Following Policies and Procedures Working Safely Displaying Technical Expertise Travel Travel is frequently required to and from job site locations. Supervisory Responsibility Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to use hands and fingers to handle, feel or operate objects, tools or controls, and reach with hands and arms. The employee is frequently required to stand, talk and hear. The employee is occasionally required to walk, sit, climb, balance, stoop, kneel, crouch, crawl, taste and smell. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Position Type/Expected Hours of Work This is a full-time position which will typically involve 40+ hours a week. Due to the nature of the job, the employee must be available on-call early/late hours to deal with delays, bad weather and emergencies at the job site. AAP/EEO Statement It has been and will continue to be a fundamental policy of the Company not to discriminate on the basis of race, color, religion, sex, national origin, age, disability, sexual orientation, gender identity, or status as a veteran, or any other basis protected by applicable federal, state or local law, with respect to recruitment, hiring, training, promotion, and other terms and condition of employment. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Nearest Major Market: Charlottesville Nearest Secondary Market: Virginia Apply now " Find similar jobs: * Careers Home * View All Jobs * Benefits * Life at Branch * Programs * branchgroup.com * * * Copyright 2025

Job Description Since 1996, RQ Construction, LLC. has been a leading player in Southern California's robust commercial and governmental Design-Build economy. We have a national and international presence spanning coast to coast, including U.S. Naval Base Guantanamo Bay, Cuba and now, Puerto Rico. We offer management of projects throughout the United States, with our field operations' team members who work on location for each of our projects. We specialize in fast-track projects in new commercial construction with a primary focus in the Department of Defense market. Position Summary: We are looking to hire skilled Combination Pipe Welders in the future to join our Mechanical team for ongoing work at King's Bay Naval Base, GA and the surrounding area. All work is to be performed on the military base and is paid the required Davis-Bacon prevailing wage, specific to the base. Applications are being accepted into a candidate pool for this position at this moment in time. Pay: $45.15 - $50.00 per hour Benefits: Medical, Dental, Vision, 401k with Match, 1 week vacation and sick time. Our Combination Welder will be responsible for using hand-welding, flame cutting, hand soldering, or brazing equipment to weld or join metal components. This position will require the ability to pass groove-weld qualification tests in all positions for multiple materials and processes using both Shielded Metal Arc Welding (SMAW) as well as Gas Tungsten Arc Welding (GTAW) as necessary. All work is completed on an active construction site, and in accordance with relevant codes. Work involves technical application of mechanical welding principles. This is all to be done using the appropriate equipment and implementing the required safety practices in support of RQ's Mission, Vision, and Values. EDUCATION & EXPERIENCE A high school diploma or GED is the preferred minimum formal education for this position. Should be supplemented by completion of a Union, private (in-house), military, or trade school apprenticeship program that includes theory and on-the-job 5 to 8 years (or equivalent) field or trade work experience as a Combination Welder in a commercial, or facilities operations setting is required; government, military, or large commercial construction experience Candidates must be able to pass 6G GTAW & SMAW test before being hired. CPR, First Aid, and OSHA 30-hour Certifications required (training can be provided) Specific training or certificates in the following preferred (training can be provided): Trenching and shoring training Fall protection Confined space training Forklift/Manlift training and certificate Power actuated tools training and certificate Lockout/Tagout training Scissor lift/boom lift certificate EM-385 We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, creed, gender (including gender identity and gender expression), religion (all aspects of religious beliefs, observance or practice, including religious dress or grooming practices) marital status, registered domestic partner status, age, national origin or ancestry, physical or mental disability, medical condition (including cancer or a record or history of cancer, and genetic characteristics), sex (including pregnancy, childbirth, breastfeeding or related medical condition), genetic information, sexual orientation, veteran status, or any other basis or status protected by federal, state, or local law or ordinance or regulation. All candidates considered for hire must provide evidence of identity and U.S. work authorization at the time of hire. Additionally, all candidates must successfully pass a drug screening and commercial criminal background check, including a stricter Department of Defense background check, for access to job site at military base (if applicable for position being hired for). Job Posted by ApplicantPro

Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter

Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter

Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter

Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter

Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter

The Field Pipe Welder is a highly skilled tradesperson responsible for executing specialized welding, fitting, and repair tasks directly on commercial, institutional, and industrial construction sites. This role requires exceptional mobility, the ability to work independently under varying conditions, and proficiency in complex pipe and structural welding required for installation, modification, and final tie-ins of mechanical systems. The Field Pipe Welder must strictly adhere to safety regulations, and all relevant industry codes (ASME, AWS). Key Responsibilities Site Welding and Installation On-Site Execution: Perform high-integrity welding (SMAW, GTAW, FCAW) on piping systems, structural supports, hangers, and equipment skids in various field environments, including elevated platforms, trenches, and congested areas. Tie-Ins and Repairs: Execute critical tie-ins of new piping systems to existing infrastructure, including performing hot taps and specialized repairs on live systems, ensuring minimal disruption to ongoing operations. Code Compliance: Ensure all field welding procedures and completed work meet stringent quality assurance standards and applicable codes (e.g., ASME B31.1, B31.3, AWS D1.1). Material Handling and Setup: Set up, and tear down welding equipment (e.g., engine-driven welders, plasma cutters, rigging) safely and efficiently at multiple job sites. Preparation: Cut, fit, bevel, and prepare materials for welding to ensure proper alignment and joint gaps. Safety and Coordination Site Safety: Maintain an unwavering commitment to construction site safety, including rigorous adherence to site-specific safety plans, fall protection protocols, confined space procedures, and hot work permits. Quality Control: Conduct visual inspection of welds, identify defects, and perform necessary repairs or grinding to ensure acceptance by quality control personnel and inspectors. Communication: Communicate effectively with Site Superintendents, Foremen, other trades, and Project Managers regarding work progress, potential issues, and material needs. Required Qualifications Education and Experience High School Diploma or GED required. Minimum of three (3) years of proven experience as a certified Field Welder, ideally within the commercial or industrial mechanical construction industry. Experience with rigging, hoisting, and safe operation of material handling equipment (e.g., forklifts, aerial lifts). Skills and Certifications Core Welding Proficiency: Expert level proficiency in SMAW (Stick) and GTAW (TIG) on carbon steel and stainless steel pipe in all positions (especially 6G). Certifications: Current certification (or ability to pass immediate certification tests) for ASME Section IX pipe welding qualifications. AWS D1.1 structural certification is often required. Technical Skills: Exceptional ability to read and interpret complex blueprints, P&IDs (Piping and Instrumentation Diagrams), isometric drawings, and welding procedure specifications (WPS). Safety Training: Current OSHA 10-Hour or 30-Hour Construction Safety certification. Mobility: Must possess reliable transportation to travel to various job sites daily. Physical Requirements This position requires working in a demanding construction environment, often outdoors, and involves significant physical labor. Ability to work at heights (on ladders, scaffolds, and lifts) and in confined spaces. Ability to stand, walk, climb, and perform heavy labor for the duration of a shift. Ability to lift and move equipment and materials weighing up to 50 pounds. Must be able to work in various weather conditions (heat, cold, rain). Excellent balance, coordination, and depth perception are essential for navigating construction sites. McKenney's is an Equal Opportunity Employer and values diversity. All employment decisions are based on qualifications, merit, and business need. Moving Safety Forward, our initiative for continuous improvements in our safety culture, reminds us that we are on a journey toward a zero-incident culture. In all we do, we must work to build a partnership with our employees, customers and business associates that empowers them all with the ability to do their jobs safely. McKenney's is an Equal Opportunity Employer committed to workforce diversity. Qualified candidates will receive consideration without regard to age, color, religion, sexual orientation, disability, national origin, or gender identity. McKenney's is a smoke-free and drug-free workplace.

The Production Welder is responsible for performing high-quality welding and fabrication tasks in a fast-paced shop environment. This role requires proficiency in multiple welding processes, the ability to accurately interpret technical drawings, and strict adherence to industry codes (such as AWS and ASME) and safety standards. The primary focus is on the efficient fabrication of piping spools, structural supports, and other components used in commercial, industrial, and high-tech mechanical systems. Key Responsibilities Welding and Fabrication Perform Welding Operations: Execute various welding techniques, including but not limited to Shielded Metal Arc Welding (SMAW/Stick), Gas Metal Arc Welding (GMAW/MIG), Gas Tungsten Arc Welding (GTAW/TIG), and Flux-Cored Arc Welding (FCAW). Material Expertise: Weld a variety of materials, including carbon steel, stainless steel, and alloys, using appropriate procedures and filler metals. Component Assembly: Fit, tack, and weld complex assemblies (e.g., pipe spools, equipment skids, structural frames) according to detailed specifications and dimensions. Blueprint Interpretation: Read and accurately interpret blueprints, schematics, welding symbols, and written specifications to determine the proper layout and welding requirements. Material Preparation: Prepare materials for welding by cutting, grinding, deburring, and positioning components using manual and automated tools (e.g., plasma cutters, oxy-acetylene torches, grinders, pipe bevelers). Quality and Safety Quality Control: Inspect finished welds to ensure they meet quality standards, tolerance requirements, and code specifications (e.g., penetration, bead size, structural integrity). Safety Compliance: Strictly adhere to all company and OSHA safety policies, including the use of required Personal Protective Equipment (PPE) and proper handling of hazardous materials and hot work Troubleshooting: Identify and correct welding defects (e.g., porosity, undercut, lack of fusion) and troubleshoot equipment malfunctions. Operations Productivity: Maintain high levels of productivity and efficiency while ensuring the quality of work is not compromised. Documentation: Complete required production logs, and time sheets accurately. Collaboration: Work effectively with fitters, fabricators, and the shop management team to prioritize tasks and meet production deadlines. Required Qualifications Education and Experience High School Diploma or GED required. Completion of an accredited welding or fabrication vocational program is highly preferred. Minimum of two (2) years of experience in production welding, preferably in mechanical systems, industrial piping, or structural fabrication. Skills and Certifications Welding Proficiency: Demonstrated ability to perform high-quality welds in all positions (flat, horizontal, vertical, overhead). Certifications: Current or ability to pass welding qualification tests in relevant procedures (e.g., ASME Section IX for pipe, AWS D1.1 for structural steel). Experience with 6G pipe welding is a significant asset. Technical Skills: Proficient in reading standard fabrication drawings, isometric drawings, and understanding Geometric Dimensioning and Tolerancing (GD&T) principles. Math Skills: Strong basic mathematical skills necessary for measurement, calculation of material requirements, and layout. Tool Usage: Expertise in operating standard shop tools, measuring devices (tape measures, calipers, squares), and material handling equipment (overhead cranes, forklifts - certification preferred). Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Ability to stand, walk, crouch, and kneel for extended periods. Ability to lift, push, and pull objects weighing up to 50 pounds frequently. Manual dexterity required for manipulating welding torches, hand tools, and materials. Vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Must be able to work in an environment with exposure to noise, heat, sparks, and fumes, utilizing appropriate PPE. McKenney's is an Equal Opportunity Employer and values diversity. All employment decisions are based on qualifications, merit, and business need. Moving Safety Forward, our initiative for continuous improvements in our safety culture, reminds us that we are on a journey toward a zero-incident culture. In all we do, we must work to build a partnership with our employees, customers and business associates that empowers them all with the ability to do their jobs safely. McKenney's is an Equal Opportunity Employer committed to workforce diversity. Qualified candidates will receive consideration without regard to age, color, religion, sexual orientation, disability, national origin, or gender identity. McKenney's is a smoke-free and drug-free workplace.

Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter

Job Description Turner Industries is a fully diversified industrial contractor. We help move the world forward by providing responsive, innovative solutions designed to increase plant production, reduce costs, reduce downtime, and even prevent shutdowns. Headquartered in Baton Rouge, LA, Turner Industries has over 20,000 employees with offices and job sites across the United States. Our single-solution approach in the petrochemical, refining, energy, pulp and paper, and related industries has made Turner one of the nation's top industrial contractors and earned us the No. 1 spot on ABC's 2024 Top Performers list. People are at the heart of everything we do. Their safety, security, and satisfaction have always been our top priorities. For proof, look no further than our strong working relationships and extraordinary workforce. We are seeking a Certified Pipe Welder for a position in Hopewell, VA. The Welder position lays out, fits, and welds fabricated, cast, and forged components to assemble structural forms, such as tanks, pressure vessels, furnace shells, pipe and building and bridge parts. Non-exempt role; Reports to the Foreman; Assigned duties according to specific procedures / work is checked frequently. Essential Qualifications: High school or equivalent Minimum four (4) years of experience in specified skill 6G, Stick, TIG, Stainless, Carbon Steel, Chrome Must be able to pass X-Ray and UT Must be a local candidate Must be able to pass a weld test before being hired Must be certified as a welder Written pre-employment qualification test Post-offer drug/alcohol screen and physical evaluation Job site safety requirements as required by the client (clean shaven, long sleeves, steel toe boots, etc.) Safety equipment as required by the client (hard hat, safety glasses, gloves, respirator, hearing protection, safety harness with lanyard, etc.) Applicant/employee must not pose a direct threat to the health or safety of others in the workplace Functional Requirements: Selects equipment and plans layout, assembly, and welding, Lays out, positions, aligns, and fits components together, Bolts, clamps, tacks parts to secure in position for welding, Sets up equipment and welds parts, May assemble parts by bolting and riveting, May weld pipe such as carbon steel, stainless steel, chrome, etc. by process of arc, heliarc, gas, tig, etc., May weld pipe, sheet metal, structural steel, brackets, or other materials, May repair products by dismantling, straightening, reshaping, and reassembling parts, May use cutting torch to cut materials and demo existing assemblies, Perform additional assignments per supervisor's direction. Compensation Final agreed upon compensation is based upon individual qualifications and experience. Benefits Depending on your employment status, benefits include health, dental, vision, life, ADD, voluntary life / ADD, disability benefits, leaves of absence, 401k, paid time off, paid holidays, telehealth access, and employee assistance program. Physical Involvement: Employee may be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds, structures, etc.; reaching in all directions, handling and manipulating objects and materials; coordinating the movement of eyes, hands and fingers to operate tools and equipment; lifting 30-50 lbs. from ground level, waist level, and/or overhead; carrying objects, tools, etc.; standing; sitting; walking; seeing with or without correction; hearing with or without correction; following set procedures and standards; applying basic mathematical skills; planning work; comparing and understanding differences in the size, shape and form of lines, figures and objects; picturing and evaluating solid objects from drawings or diagrams using standards that can be measured or checked; following oral and/or written directions, plans and blueprints; reading; writing; ability to recognize and report safety hazards Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law. Keywords: welding, repair, assembly, hydraulic tools Job Posted by ApplicantPro

Turner Industries is a fully diversified industrial contractor. We help move the world forward by providing responsive, innovative solutions designed to increase plant production, reduce costs, reduce downtime, and even prevent shutdowns. Headquartered in Baton Rouge, LA, Turner Industries has over 20,000 employees with offices and job sites across the United States. Our single-solution approach in the petrochemical, refining, energy, pulp and paper, and related industries has made Turner one of the nation's top industrial contractors and earned us the No. 1 spot on ABC's 2024 Top Performers list. People are at the heart of everything we do. Their safety, security, and satisfaction have always been our top priorities. For proof, look no further than our strong working relationships and extraordinary workforce. We are seeking a Certified Pipe Welder for a position in Hopewell, VA. The Welder position lays out, fits, and welds fabricated, cast, and forged components to assemble structural forms, such as tanks, pressure vessels, furnace shells, pipe and building and bridge parts. Non-exempt role; Reports to the Foreman; Assigned duties according to specific procedures / work is checked frequently. Essential Qualifications: * High school or equivalent * Minimum four (4) years of experience in specified skill * 6G, Stick, TIG, Stainless, Carbon Steel, Chrome * Must be able to pass X-Ray and UT * Must be a local candidate * Must be able to pass a weld test before being hired * Must be certified as a welder * Written pre-employment qualification test * Post-offer drug/alcohol screen and physical evaluation * Job site safety requirements as required by the client (clean shaven, long sleeves, steel toe boots, etc.) * Safety equipment as required by the client (hard hat, safety glasses, gloves, respirator, hearing protection, safety harness with lanyard, etc.) * Applicant/employee must not pose a direct threat to the health or safety of others in the workplace Functional Requirements: Selects equipment and plans layout, assembly, and welding, Lays out, positions, aligns, and fits components together, Bolts, clamps, tacks parts to secure in position for welding, Sets up equipment and welds parts, May assemble parts by bolting and riveting, May weld pipe such as carbon steel, stainless steel, chrome, etc. by process of arc, heliarc, gas, tig, etc., May weld pipe, sheet metal, structural steel, brackets, or other materials, May repair products by dismantling, straightening, reshaping, and reassembling parts, May use cutting torch to cut materials and demo existing assemblies, Perform additional assignments per supervisor's direction. Compensation Final agreed upon compensation is based upon individual qualifications and experience. Benefits Depending on your employment status, benefits include health, dental, vision, life, ADD, voluntary life / ADD, disability benefits, leaves of absence, 401k, paid time off, paid holidays, telehealth access, and employee assistance program. Physical Involvement: Employee may be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds, structures, etc.; reaching in all directions, handling and manipulating objects and materials; coordinating the movement of eyes, hands and fingers to operate tools and equipment; lifting 30-50 lbs. from ground level, waist level, and/or overhead; carrying objects, tools, etc.; standing; sitting; walking; seeing with or without correction; hearing with or without correction; following set procedures and standards; applying basic mathematical skills; planning work; comparing and understanding differences in the size, shape and form of lines, figures and objects; picturing and evaluating solid objects from drawings or diagrams using standards that can be measured or checked; following oral and/or written directions, plans and blueprints; reading; writing; ability to recognize and report safety hazards Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law. Keywords: welding, repair, assembly, hydraulic tools

Since 1996, RQ Construction, LLC. has been a leading player in Southern California's robust commercial and governmental Design-Build economy. We have a national and international presence spanning coast to coast, including U.S. Naval Base Guantanamo Bay, Cuba and now, Puerto Rico. We offer management of projects throughout the United States, with our field operations' team members who work on location for each of our projects. We specialize in fast-track projects in new commercial construction with a primary focus in the Department of Defense market. Position Summary: We are looking to hire skilled Combination Pipe Welders in the future to join our Mechanical team for ongoing work at King's Bay Naval Base, GA and the surrounding area. All work is to be performed on the military base and is paid the required Davis-Bacon prevailing wage, specific to the base. Applications are being accepted into a candidate pool for this position at this moment in time. Pay: $45.15 - $50.00 per hour Benefits: Medical, Dental, Vision, 401k with Match, 1 week vacation and sick time. Our Combination Welder will be responsible for using hand-welding, flame cutting, hand soldering, or brazing equipment to weld or join metal components. This position will require the ability to pass groove-weld qualification tests in all positions for multiple materials and processes using both Shielded Metal Arc Welding (SMAW) as well as Gas Tungsten Arc Welding (GTAW) as necessary. All work is completed on an active construction site, and in accordance with relevant codes. Work involves technical application of mechanical welding principles. This is all to be done using the appropriate equipment and implementing the required safety practices in support of RQ's Mission, Vision, and Values. EDUCATION & EXPERIENCE * A high school diploma or GED is the preferred minimum formal education for this position. Should be supplemented by completion of a Union, private (in-house), military, or trade school apprenticeship program that includes theory and on-the-job * 5 to 8 years (or equivalent) field or trade work experience as a Combination Welder in a commercial, or facilities operations setting is required; government, military, or large commercial construction experience * Candidates must be able to pass 6G GTAW & SMAW test before being hired. * CPR, First Aid, and OSHA 30-hour Certifications required (training can be provided) * Specific training or certificates in the following preferred (training can be provided): * Trenching and shoring training * Fall protection * Confined space training * Forklift/Manlift training and certificate * Power actuated tools training and certificate * Lockout/Tagout training * Scissor lift/boom lift certificate * EM-385 We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, creed, gender (including gender identity and gender expression), religion (all aspects of religious beliefs, observance or practice, including religious dress or grooming practices) marital status, registered domestic partner status, age, national origin or ancestry, physical or mental disability, medical condition (including cancer or a record or history of cancer, and genetic characteristics), sex (including pregnancy, childbirth, breastfeeding or related medical condition), genetic information, sexual orientation, veteran status, or any other basis or status protected by federal, state, or local law or ordinance or regulation. All candidates considered for hire must provide evidence of identity and U.S. work authorization at the time of hire. Additionally, all candidates must successfully pass a drug screening and commercial criminal background check, including a stricter Department of Defense background check, for access to job site at military base (if applicable for position being hired for).

About Us We are a leading industrial mechanical, electrical, and civil construction services provider for the fossil and nuclear power, pulp and paper, chemical, mining, and general manufacturing industries. We provide a full range of industrial facilities maintenance and process maintenance services. Job Summary About Us: Backed by more than 40 years of experience and one of the industry's leading safety performance records, PPM, helps clients address the complex challenges inherent in today's manufacturing and industrial facilities environment. Our wide experience in meeting industrial plant maintenance needs enables us to implement systems and processes that keep your facilities and equipment running at consistently optimum levels. Job Title: Pipe Welder-- Skippers, VA Job Summary: The pipe welder will perform welding, lays out, fabricates, assembles, installs and maintenance of piping systems, pipe supports, fixtures, and related hydraulic and pneumatic equipment. Qualifications: Possess the ability to use the English language to communicate (both verbally and in writing) Read and interpret blueprints, mechanical drawings, and hydraulic diagrams Have a complete set of tools appropriate for Industrial pipe fitting/welding Ability to stoop, bend, manipulate tools in small spaces Perform work at heights Ability to frequently lift and/or move varied objects up to 10 pounds and occasionally lift and/or move up to 50 pounds Perform and pass pipe coupon weld test Preferred experience At least 4 years Pipe welding preferably in an industrial setting. Physical Requirements/Job Site Requirements: Must be able to complete hiring paperwork electronically through DocuSign May be required to lift and carry items weighing up to 50 pounds Must posses enough strength and stamina to perform the technical duties and essential functions as identified above Must be able to move in and around confined spaces and uneven areas Must have full range of motion consistent with age Must be able to climb and maintain balance ladders Must be able to adequately hear and respond to voice commands and alerts from other employees, alarms and other job-related noises Visual acuity, depth perception and color discrimination consistent with that required to work at heights and on uneven surfaces Safety/Steel toe shoes are required. #ppm Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Affirmative Action Policy Please review our Affirmative Action Policy. Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

About Us We are a leading industrial mechanical, electrical, and civil construction services provider for the fossil and nuclear power, pulp and paper, chemical, mining, and general manufacturing industries. We provide a full range of industrial facilities maintenance and process maintenance services. Job Summary About Us: Backed by more than 40 years of experience and one of the industry's leading safety performance records, PPM, helps clients address the complex challenges inherent in today's manufacturing and industrial facilities environment. Our wide experience in meeting industrial plant maintenance needs enables us to implement systems and processes that keep your facilities and equipment running at consistently optimum levels. Job Title: Pipe Welder-- Hopewell, VA Job Summary: The pipe welder will perform welding, lays out, fabricates, assembles, installs and maintenance of piping systems, pipe supports, fixtures, and related hydraulic and pneumatic equipment. Qualifications: Possess the ability to use the English language to communicate (both verbally and in writing) Read and interpret blueprints, mechanical drawings, and hydraulic diagrams Have a complete set of tools appropriate for Industrial pipe fitting/welding Ability to stoop, bend, manipulate tools in small spaces Perform work at heights Ability to frequently lift and/or move varied objects up to 10 pounds and occasionally lift and/or move up to 50 pounds Perform and pass pipe coupon weld test Preferred experience At least 4 years Pipe welding preferably in an industrial setting. Physical Requirements/Job Site Requirements: Must be able to complete hiring paperwork electronically through DocuSign May be required to lift and carry items weighing up to 50 pounds Must posses enough strength and stamina to perform the technical duties and essential functions as identified above Must be able to move in and around confined spaces and uneven areas Must have full range of motion consistent with age Must be able to climb and maintain balance ladders Must be able to adequately hear and respond to voice commands and alerts from other employees, alarms and other job-related noises Visual acuity, depth perception and color discrimination consistent with that required to work at heights and on uneven surfaces Safety/Steel toe shoes are required. Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and is companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Affirmative Action Policy Please review our Affirmative Action Policy. Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

Summary Welds metal parts with welding equipment as specified by layout, welding diagram, or work order by performing the following duties. Essential Duties and Responsibilities include the following. Other duties may be assigned. 1. Understands OSHA, AISC & AWS Standards relating to welding and that working safely is a job requirement. Understands and complies with CSE, Inc. Safety Program, rules, regulations and updates; works within AISC Standard Practice codes relating to welding *Becomes familiar with supervisory personnel, job activity to be performed, site hazard communication program, site safety rules and regulations, and site emergency action** 2. Follows directions and assumes responsibility of assisting Foreman on site by completing the following tasks: Assists with inspecting and identifying hazards associated with all welding Positions parts in jigs or fixtures on bench floor, or clamps parts together along with layout Obtains specified electrode and inserts electrode into portable threads consumable electrode wire through portable welding Selects torch, torch tip, filler rod and flux, according to welding chart specifications or type and thickness of Connects cables from welding unit to obtain amperage, voltage, slope, and pulse; Connects regulator valves and hoses to oxygen and fuel gas cylinders, and welding Strikes (forms) arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work Turns regulator valves to activate flow of gases, lights torch and adjusts gas mixture and pressure to obtain desired Manually guides electrode or gun along weld line, maintaining length of air and speed of movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten Holds torch at proper angle and guides along weld joint, applying filler rod to molten area to form Fits materials together prior to Has thorough knowledge in fabrication including lay-out, cutting, grinding Has the ability to weld FCAW, SMAW, and3. Assumes responsibility of inspecting equipment, structures and/ or material Examines weld for bead size and other Repairs broken or cracked metal objects, fills holes, and builds up metal Prepares parts for welding by grooving or scarfing surfaces; Welds along vertical flat, horizontal or overhead weld Scarfs or grooves weld prior to applying filler metal; Chips or grinds off excess weld, slag, or Cleans or degreases weld joint or work piece; tacks assemblies* Supervisory Responsibilities: This job has no supervisory responsibilities. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty safely and satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience:2+ years of experience. Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Mathematical Skills: Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using units of weight measurement, volume, and distance. Reasoning Ability: Ability to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: Welding Certification, Valid Drivers License Other Qualifications: Must be able to travel. Must be able to pass a pre-employment drug screen. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. The employee must regularly lift and /or move up to 50 pounds, frequently lift and/or move up to 100 pounds and occasionally lift and/or move more than 100 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles and outside weather conditions. The employee is occasionally exposed to vibration. The noise level in the work environment is usually loud. CSE offers competitive wages, vacation/personal time, medical, dental, vision, and other competitive benefits, including a 401k plan. INTENT AND FUNCTION OF S s assist organizations in ensuring that the hiring process is fairly administered and that qualified employees are selected. They are also essential to an effective appraisal system and related promotion, transfer, layoff, and termination decisions. Well-constructed s are an integral part of any effective compensation system. All descriptions have been reviewed to ensure that only essential functions and basic duties have been included. Peripheral tasks, only incidentally related to each position, have been excluded. Requirements, skills, and abilities included have been determined to be the minimal standards required to successfully perform the positions. In no instance, however, should the duties, responsibilities, and requirements delineated be interpreted as all inclusive. Additional functions and requirements may be assigned by supervisors as deemed appropriate. In accordance with the Americans with Disabilities Act, it is possible that requirements may be modified to reasonably accommodate disabled individuals. However, no accommodations will be made which may pose serious health or safety risks to the employee or others or which impose undue hardships on the organization. Job descriptions are not intended as and do not create employment contracts. The organization maintains its status as an at-will employer. Employees can be terminated for any reason not prohibited by law.