Controls technician jobs in Burlington, NC - 201 jobs

Requires advanced knowledge of operational procedures and tools obtained through extensive work experience and may require vocational or technical education. Responsibilities typically include: working under limited supervision for non-routine situations and may be responsible for leading daily operations. Training, delegating, and reviewing the work of lower-level employees. Problems are typically difficult and non-routine but not complex. Primary Duties Diagnose and troubleshoot automation equipment, including PLCs and SCADA systems. Design and implement modifications to control systems under general guidelines or independently. Execute repairs and implement modifications to enhance safety and reduce costs. Collaborate with management to support manufacturing operations and business continuity. Conduct failure investigations and document findings for automation issues. Maintain compliance with quality systems while optimizing manufacturing processes. Conduct complex diagnostic tests and root cause analysis for system failures. Participate in planning and executing system upgrades and expansions. Make recommendations for process optimization and efficiency improvements. Perform all work in compliance with company quality procedures and standards. Perform other duties as assigned. Education High School Diploma, GED, or equivalent required. Qualifications 5+ years of experience maintaining and/or troubleshooting automated systems in a manufacturing environment. Knowledge, Skills and Abilities: Strong troubleshooting and diagnostic skills for automation systems. Ability to work under limited supervision and handle non-routine situations. Knowledge of PLCs, SCADA systems, and automation equipment. Problem-solving and root cause analysis for system failures. Ability to collaborate effectively with management and cross-functional teams. Working Conditions Ability to remain in stationary position, often standing, for prolonged periods. Ability to ascend/descend stairs, ladders, ramps, and similar structures. Ability to wear PPE correctly most of the day. Ability to operate heavy machinery. Ability to adjust or move objects up to 50 pounds in all directions. Domestic travel required: 0%. International travel required: 0%. Typical manufacturing environment with exposure to automated equipment. The estimated salary range for this role is between $38.00 and $50.00. This role is eligible to receive a variable annual bonus based on company, team, and individual performance per bio Merieux's bonus program. This range may differ from ranges offered for similar positions elsewhere in the country given differences in cost of living. Actual compensation within this range is determined based on the successful candidate's experience and will be presented in writing at the time of the offer. In addition, bio Merieux offers a competitive Total Rewards package that may include: * A choice of medical (including prescription), dental, and vision plans providing nationwide coverage and telemedicine options * Company-Provided Life and Accidental Death Insurance * Short and Long-Term Disability Insurance * Retirement Plan including a generous non-discretionary employer contribution and employer match. * Adoption Assistance * Wellness Programs * Employee Assistance Program * Commuter Benefits * Various voluntary benefit offerings * Discount programs * Parental leaves #biojobs Please be aware that recruitment related scams are on the rise. Fraudulent job postings are being placed on other websites, and individuals posing as bio Merieux Talent Acquisition team members are reaching out via email or text message in an attempt to collect your personal and confidential information. In some cases, these scammers are also conducting bogus interviews prior to extending fraudulent offers of employment. Beware of individuals reaching out using general phone numbers and non-bio Merieux email domains (i.e. Hotmail.com, Gmail.com, Yahoo.com, etc.). If you are concerned that an interview experience or offer of employment might be a scam, please make sure you are searching for the posting on our careers site or contact us at [emailprotected]. BioMerieux Inc. and its affiliates are Equal Opportunity/Affirmative Action Employers. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Please be advised that the receipt of satisfactory responses to reference requests and the provision of satisfactory proof of an applicant's identity and legal authorization to work in the United States are required of all new hires. Any misrepresentation, falsification, or material omission may result in the failure to receive an offer, the retraction of an offer, or if already hired, dismissal. If you are a qualified individual with a disability, you may request a reasonable accommodation in BioMerieux's or its affiliates' application process by contacting us via telephone at , by email at [emailprotected], or by dialing 711 for access to Telecommunications Relay Services (TRS).

Job Title: Facilities Technician Company: AISIN North Carolina Department: Facilities The Facilities Technician is responsible for providing electrical and mechanical support to the plant facilities. This role troubleshoots and maintains industrial manufacturing facilities equipment as well as the outdoor grounds of the facility. Position Responsibilities The incumbent is expected to perform the following functions that the company has determined are essential to this position: Handle industrial electrical issues including changing light bulbs and working with 208, 277, 480-volt, 3 phase and 120-volt, single phase equipment. Install, repair, and troubleshoot industrial piping systems along with the ability to change out pumps and motors. Troubleshoot to determine malfunctions on equipment using knowledge of microprocessors, programmable controllers, and circuit analysis. Troubleshoot AC & DC Systems up to 480 volts. Record maintenance and repairs activities in a computer-based maintenance management system, fill out utility check sheets and other required check sheets. Run Wastewater treatment system. Check operating status of air compressors. Execute plumbing repairs such as clearing clogged fixtures, drains, and adjusting leaks. Clean out clogged pumps in the sump pumps system as well as troubleshoot and adjust level controls in the system. Repair manual and automatic doors, hinges, locks, and closers on personal doors. Make repairs to dock equipment and the well system. Review equipment check sheets for abnormal readings. Lead Team Members in light fixture replacement. Ensure that restrooms are in good working order. Identify and repair building issues. Assist in making safety related kaizens and repairs. Plan and implement Kaizens. Required Skills and Abilities Essential Skills and Experience: 2 or more years of experience in industrial maintenance. Knowledge of electrical equipment - 480/230v 3ph, 110&24 vdc controls, prints and schematics. Knowledge of hydraulics and pneumatics. Knowledge of Plant Fire Sprinkler Systems. Ability to reset faults in the following systems and equipment: ATF Supply System, Crane Systems, Fluid Coolers, Air Compressors. Ability to safely operate industrial moving equipment such as a scissor lift, forklift, and other equipment. Ability to troubleshoot and correct faults on Wastewater System. Electrical skills. Mechanical - general knowledge of machines, tools, measurement instruments, automation/robotics, maintenance, and repair. Repairing - repairing machines or systems using the necessary tools. Equipment Maintenance - performing routine maintenance on equipment and determining when and what kind of maintenance is needed. Equipment Selection - determining the kind of tools and equipment needed to do a job. Math Skills - basic knowledge of mathematics. Education/Training/Certifications Associate degree in Electrical or Industrial Maintenance preferred. Travel Requirements Approximately 0 % Must be willing and available to travel to such locations and with such frequency as is necessary and desirable to meet business needs. Work Environment Requirements With reasonable accommodation: Must be able to operate a personal computer, telephone, and other office equipment. Must perform job duties onsite, when necessary, except those duties that are customarily or by their nature performed offsite (for example, offsite customer visits). Must be able to work effectively in a fast-paced environment. Must be able to work on multiple assignments at once, and complete assignments within deadline and budget (if applicable) with satisfactory quality. Must be able to operate as an effective team member. Must be committed to a high standard of safety and be willing and able to comply with all safety laws and all company safety policies. Attendance/Work Hour Requirements Must maintain an acceptable attendance record. Must be willing and available to work weekends and holidays as necessary and desirable to meet business needs.

Clorox is the place that's committed to growth - for our people and our brands. Guided by our purpose and values, and with people at the center of everything we do, we believe every one of us can make a positive impact on consumers, communities, and teammates. Join our team. #CloroxIsThePlace Your role at Clorox: The EIC Technician is a critical part of the of the Maintenance and Production teams, responsible for keeping equipment running in a safe and efficient manner. The EIC Technician reports to the Maintenance Manager and has responsibility for maintaining all electrically controlled devices on the plant floor, including troubleshooting, performing PM work orders, and ensuring proper hardware and software configurations. EIC Technicians will support production equipment and flow to the highest priority work while collaborating across department boundaries, participating in team building activities, and ensure compliance with all plant procedures, policies, and standards. Schedule: M-F; 6a-230p Hourly Compensation: $38.00 In this role, you will: The EIC Technician will: Ensure that all electrical equipment is in safe operating condition Practice safe work habits daily and ensure all safety processes are followed. Maintain proper tools in good working condition and keep work areas clean. Maintain mechanical and electrical knowledge via in-going training, industry workshops, and technical reading. Assist with developing training documentation and participate in the training of new maintenance team members. Key Responsibilities: Attend daily shift meetings to discuss prioritized work orders and minimizing downtime. Perform designated electronic technical duties to ensure system performance. Troubleshoot and resolve control systems issues to minimize downtime. Support project work with Controls Engineers, from concept to completion. Perform emergency repairs and assist in installing new equipment. Document work performed on control systems and support process improvements. Adhere to safety guidelines and actively participate in safety programs. You will work on challenging assignments that include investigating, troubleshooting, and solving a wide variety of instrumentation & controls engineering issues Provide direct support for Controls Engineering functions (OT-Operations Technology) in manufacturing processes. Perform daily engagement/troubleshooting with end-to-end systems, including machine controls, SCADA, and interfaces with upper-level systems (MES and SAP). Conduct equipment installations and system development/troubleshooting as required to align to current standards. Investigate connectivity issues to diagnose and resolve network connection problems. Assist in maintaining program/PLC backups for devices to ensure data integrity and recovery readiness. Provide technical support for troubleshooting Allen-Bradley, Siemens, and other PLC systems. Support and troubleshoot Profibus, ControlNet, and Ethernet data communication systems. Replace defective components or parts, using hand tools and precision instruments. Set up and operate specialized or standard test equipment to diagnose, test, or analyze the performance of electronic components, assemblies, or systems. Read blueprints, wiring diagrams, schematic drawings, or engineering instructions for assembling electronics units, applying knowledge of electronic theory and components. Identify and resolve equipment malfunctions, working with manufacturers or field representatives as necessary to procure replacement parts. Review electrical engineering plans to ensure adherence to design specifications and compliance with applicable electrical codes and standards. Assemble, test, or maintain circuitry or electronic components, according to engineering instructions, technical manuals, or knowledge of electronics, using hand or power tools. Review existing electrical engineering criteria to identify necessary revisions, deletions, or amendments to outdated material. Maintain system logs or manuals to document testing or operation of equipment. Educate equipment operators on the proper use of equipment. Integrate software or hardware components, using computer, microprocessor, or control architecture. Install or maintain electrical control systems, industrial automation systems, or electrical equipment, including control circuits, variable speed drives, or programmable logic controllers. Execute PM work orders and create work orders for issues found during PM inspections. Troubleshoot, repair, improve, and maintain all equipment including all electrical components, drive systems, conveyors, processing equipment, pneumatic and hydraulic systems, utilities, etc. Utilize shop equipment, measurement and other diagnostic tools, and power and hand tools to assess the condition of new and used equipment. Maintain and troubleshoot PLC, HMI, and vendor developed programs. Become SAP proficient to pull weekly work schedule and evaluate work orders and concerns to escalate appropriately to ensure scheduled work can be completed. Prepare maintenance daily reports using activity logs, analysis, and trends. Provide electrical support to capital and internal projects. This includes documentation, job scopes, managing contractors, and participating in meetings. Any other duties as assigned by management. What we look for: Experience with PLCs and HMIs strongly preferred. Advanced understanding of control systems, relays, sensors, fuses, breakers, and computer networks. Capable of operating hand, power, and specialized tools Excellent problem-solving and communication skills Strong computer skills and willingness to use tablets Basic understanding of mechanics Knowledge of SAP PM preferred Minimum Education: Bachelor's Degree, College Diploma, or Equivalent experience 2 years of production/operational work required 1 year of experience in batch, continuous, and discrete manufacturing; work experience related to packaging lines. Our values-based culture connects to our purpose and empowers people to be their best, professionally and personally. We serve a diverse consumer base which is why we believe teams that reflect our consumers bring fresh perspectives, drive innovation, and help us stay attuned to the world around us. That's why we foster an inclusive culture where every person can feel respected, valued, and fully able to participate, and ultimately able to thrive. Learn more.Benefits we offer to help you be well and thrive: Competitive compensation Generous 401(k) program in the US and similar programs in international Health benefits and programs that support both your physical and mental well-being Flexible work environment, depending on your role Meaningful opportunities to keep learning and growing Half-day Fridays, depending on your location Please apply directly to our job postings and do not submit your resume to any person via text message. Clorox does not conduct text-based interviews and encourages you to be cautious of anyone posing as a Clorox recruiter via unsolicited texts during these uncertain times. To all recruitment agencies: Clorox (and its brand families) does not accept agency resumes. Please do not forward resumes to Clorox employees, including any members of our leadership team. Clorox is not responsible for any fees related to unsolicited resumes.

Amentum is seeking an CNC Machine Repair Technician IV at the subject matter expert level to join our Facilities - Operations and Maintenance team based in Durham, NC The specialist performs as the technical expert with respect to installing, troubleshooting, servicing, and documenting the electrical/electronic, mechanical and controls needs of automated equipment in an industrial environment. Must be capable of providing instruction, mentoring and training less skilled technicians as needed. Effectively communicates with the site management team and the customer to understand requirements, solve complex electrical problems, and provide solutions to manufacturing problems. The CNC Machine Repair Technician must have the ability to identify troubleshoot and correct any operational or safety-related issues and perform independent equipment root cause evaluations to identify potential equipment failures. Identifies and reports cost savings for documentation. What impact you'll make: As a member of the Maintenance team you will thrive in a collaborative environment. In this role, you'll play a critical part in maintaining, troubleshooting, and optimizing a variety of sophisticated manufacturing equipment. If you're passionate about technology, enjoy problem-solving, and want to be part of a company that values continuous improvement, we want to hear from you. The scope of service includes the maintaining, development, execution, and continuous improvement of the preventative and predictive maintenance activities at the client's site. Some of the equipment included in the scope is: Multi-Axis Wet and Dry CNC Grinders Balancers Central Coolant Systems Pumps and Exhaust systems Hydraulic and electrical systems Responsibilities: Troubleshoot and repair specialized mechanical, electrical, and electronic equipment across the facility. Perform and assist with the alignment and leveling of CNC machinery to ensure optimal performance. Communicate detailed updates on ongoing repairs to ensure smooth shift transitions. Collaborate with Facilities Engineers and external vendors to resolve complex technical issues. Provide technical support during the installation or rearrangement of production equipment. Continuously seek professional growth through available training and self-study in electrical, electronic, and mechanical systems. Actively participate in customer lead Lean initiatives and continuous improvement efforts focused on safety, quality, and productivity. Fulfill all other assigned duties and support team-based operations to meet the needs of the customer. Works with AC/DC control voltage's from (12-24V) through medium voltage motor controls and 480 volts, 3 phase. Diagnoses, troubleshoots, maintains, and repairs Machine Tools and equipment. Must understand and be capable of instrumentation and equipment calibration, for optimum performance. Reads and understands electrical/electronic and mechanical schematics. Demonstrates through understanding of AC/DC motor control. Demonstrates thorough understanding of hydraulic and pneumatics as related to electronic controls. Identifies, reviews, and recommends activities and upgrades/retrofits to improve maintenance and operation methods and equipment performance. Creates and modifies site operations procedures for equipment and recommends facilities reliability improvements. Responds and provides service and feedback to the customer on all work orders while assuring compliance with codes, regulations and industry standards. Understands company policies and enforces safety regulations. Safely performs functions of the position including following proper safety guidelines such as performing job hazard analysis, following lockout/Tag out procedures, and wearing PPE as required. Operates various measuring, diagnostic and testing instruments to help troubleshooting and repair. Operates a variety of equipment such as hand tools, laptop computers and diagnostic hardware to perform work. Demonstrates a high level of urgency and flexibility to meet emerging business needs. Exhibits strong leadership skills, such as motivation, delegation, ownership, leading by example, well-developed organizational skills, excellent communication skills, etc. Possesses the ability to lead complex technical work utilizing a wide variety of resources, including computers. Cutting or grinding processes is highly desirable. Able and willing to work in a tobacco-free environment and wear required personal protective equipment (PPE) with or without reasonable accommodation. Other duties as assigned by Manager or Supervisor. Minimum Requirements: Associate degree in Electrical/Electronic Engineering Technology, Mechatronics, or a minimum of 5 years of experience in industrial machinery maintenance with strong troubleshooting skills (electrical, electronic, and mechanical). Additional Information: Qualified applicants who are offered a position must pass a pre-employment substance abuse test. This position requires a valid Driver's License. This position does not include sponsorship for United States work authorization. This position will require the ability to obtain a security access badge at our client's location. This position may require various shifts, weekends, and alternative work schedules. Physical Requirements: Requires the ability to regularly lift 50 lbs. Requires the ability to regularly climb extension ladders, roof ladders, stepladders, and stairs at least 10 times during shift. Requires the flexibility to bend/stoop, squat repetitive during shift. Requires the ability to regularly kneel repetitive for shift. Requires the ability to move in a 90-degree fashion on a repetitive basis for shift. Requires the ability to stretch/reach on a repetitive basis for shift. Requires the ability to walk extensively throughout the plant during shift. Requires the ability to safely operate an Ariel Lift. Requires the use of a Company/Client approved utility knife. Requires the ability to differentiate colors pertaining to wire color-coding. Some tasks will require repetitive wrist movement. Requires ability to read and understand information contained in a variety of documents or displayed on a computer screen. Requires ability to use a variety of office equipment and to operate a computer keyboard to access databases, to send/receive messages and to prepare documents. Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress. Requires the ability to communicate with others on the telephone and in one-on-one or group discussions, meetings and presentations. Special Requirements: Wear steel toe safety shoes, safety glasses, gloves, hard hats and other Personal Protective Equipment as needed. Cope with demands (stressors) that are associated with the job and/or the work environment so that acceptable levels of performance and overall contribution are maintained Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Automation Technician Our client is seeking a skilled Automation Technician to support and maintain advanced automation technologies in a fast-paced manufacturing environment. This role will be responsible for troubleshooting, repairing, and optimizing drives, controllers, robotics, and other automation systems critical to production operations. With new automation technology being introduced, the Automation Technician will play a key role in supporting installations, commissioning, and ongoing system performance. This position requires someone with a solid background in industrial automation and the confidence to work independently, as training resources on-site are limited. Duties and Responsibilities: Troubleshoot, maintain, and repair automation systems including PLCs, drives, controllers, robotics, and HMIs Provide advanced support for automation equipment and robotics integration into manufacturing lines Perform preventative and predictive maintenance on automation and control systems to reduce downtime Support the installation, commissioning, and optimization of new automation technologies Collaborate with engineering and production teams on system upgrades and continuous improvement initiatives Document maintenance activities, modifications, and system performance adjustments Respond to call-ins and provide off-shift/weekend support as needed Qualifications: 3-5 years of hands-on experience in automation/controls within a manufacturing environment (required) Strong working knowledge of drives, controllers, and PLCs (Allen-Bradley or Siemens preferred) Experience with robotics programming, troubleshooting, or maintenance (preferred) Familiarity with industrial electrical systems, sensors, and motion control systems Ability to read and interpret electrical schematics, wiring diagrams, and technical documentation Strong troubleshooting skills with the ability to work independently and with minimal supervision Willingness to work overtime, weekends, and respond to call-ins as required Special Demands: Flexibility to work overtime and weekends to support production needs and call-ins is required. Must be able to climb ladders and work in elevated or confined environments Exposure to moving mechanical parts, electrical systems, and industrial conditions (noise, dust, heat, and chemicals) Commitment to continuous learning in automation and robotics technologies Active participation in safety programs and compliance with electrical codes and company standards Education / Training: High school diploma or equivalent required Associate's degree or technical training in Automation, Electrical Engineering Technology, Mechatronics, or a related field (preferred) Industrial automation experience: 2+ years (preferred) PLC troubleshooting/programming: 1+ year (preferred) Benefits: 401(k) with company match Health, Dental, Vision, and Life Insurance Paid time off and retirement plan Flexible spending account and Health savings account Tuition reimbursement Salary: $71,800-$86,700 annually M3 Placement and Partnership is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status, or any other status protected by law.

Title: CNC TechnicianLocation: Winston Salem, NC - 100% OnsiteDuration and hire type: Direct HireOverview: Sterling Engineering/Staffing is currently looking for a CNC Technician for one of our clients in the Winston Salem, NC area. Sterling has a rich history of delivering top talent to our clients. We are a nationwide Staffing Firm with over 100 clients and works primarily with Fortune 1000 corporations. Shift: 2nd Shift: 3:00 PM - 11:30 PM, Monday through Friday, some OT (5 hours) Hourly Rate: $26/hr and Up based on Experience Benefits: Benefits from Day 1 and almost 100% coverage! In addition to 11 Paid Holidays, 2 Weeks Vacations, 401(k), etc. Job DescriptionResponsible for programming and operating CNC (Computer Numerical Control) machinery. This process is used to run many different types of machinery, including shapers, hobbs, grinders, lathes, mills and routers. This machinery cuts, drills, grinds and shapes a variety of materials, from metal to plastic. Duties and Responsibilities: Perform all duties and responsibilities in compliance with safety policies Program CNC machines to perform the task needed and monitor work to ensure compliance This is to include setting and adjusting mills and lathes, hobbs and shapers, setting tool registers, offsets, compensation, conditional switches, and calculating requirements Train others on the proper set and operation of machines in a safe and efficient manner Operate multiple machines simultaneously as assigned Maintain specifications and make adjustments as needed by observing, drilling, grooving and cutting, including turning, facing, tapping, knurling and thread chasing operations; taking measurements detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance Troubleshoot programs, issues and perform routine and minor maintenance Submit work orders for the maintenance requirements Read blueprints or job orders to determine product specifications, process specifications, and tooling instructions Follows reporting and recordkeeping procedures, and report problems to supervisor or lead Works with QA and Engineering for problem solving initiatives Detects and reports defective materials or questionable conditions to management Use precision gauges and instruments such as micrometers to determine and follow customers' and product specifications Education and Training: Specific site qualifications and progression may apply, consult with local team 5+ Years of CNC Operator experience or Technical Degree Qualifications and Experience: Previous experience working in a continuous improvement culture of Lean manufacturing and 6S Prior experience using precision instruments and gauges Basic computer skills Mechanical and technical aptitude and capacity Design/Programming knowledge with NX, Macros, ESPIRIT CAD CAM software, SOLIDWORKS & JETCAM is a plus Knowledge of Quality Management Systems, ISO 9001 Knowledge of CNC program code Read and interpret blueprints, drawings, bills of materials, and inspection documents to machine parts Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.

* 1) Devises, selects, sets up, and operates electronic instrumentation and related electromechanical or electrohydraulic apparatus used for operational and environmental testing of mechanical, structural, or electrical equipment, and translates test data for engineering personnel to formulate engineering design and evaluation decisions: Selects, installs, calibrates, and checks sensing, telemetering, and recording instrumentation and circuitry, and develops specifications for nonstandard apparatus according to engineering data, characteristics of equipment under test, and capabilities of procurable test apparatus. * 2) Sketches and builds or modifies jigs, fixtures, and instruments and related apparatus, and verifies dimensional and functional acceptability of devices fabricated by craft or technical personnel. * 3) Performs preventive and corrective maintenance of test apparatus and peripheral equipment. * 4) Installs or directs technical personnel in installation of unit in test chamber or other test facility. * 5) Operates test apparatus during test cycle to produce, regulate, and record effects of actual or simulated conditions, such as vibration, stress, temperature, humidity, pressure, altitude, and acceleration. * 6) Analyzes and converts test data to usable form, using mathematical formulas, and prepares graphs and written reports to translate test results. * 7) May plan test program. * 8) May use computerized equipment and software to perform testing functions and produce graphs. * 9) May be designated according to equipment tested as Rocket-Control Technician; or according to nature of test as Environmental-Research Test Technician; Vibration Technician. QUALIFICATIONS May require a high school diploma or its equivalent and previous years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. PHYSICAL REQUIREMENTS 1. Strength: a. Standing 65% Walking 15% Sitting 20% b. Lifting 30 lb. Carrying 30 lb. Pushing 70 ft-lb. Pulling 70 ft-lb. 2. Climbing F Balancing F 3. Stooping O Kneeling O Crouching O Crawling O Reaching C Handling C Fingering C EXPLANATION OF SYMBOLS NP Not Present O Occasionally (0-33%) F Frequently (34-66%) C Constantly (67-100%) Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development.

As part of the Maintenance Team you will be working to deliver solutions to improve our process reliability, product quality and plant-wide performance. Some of the duties of the instrumentation and control technician are: Consulting diagrams and technical documentation such as schematics, manuals, standards and codes; Maintaining backup and revision documentation for control systems and instrumentation; Manage SCADA type devices in an industrial based environment Installing, configuring, calibrating and maintaining control, measurement and indicating instrumentation (pneumatic, analog & digital); Configuring and programming Programmable Logic Controls (PLC) and Programmable Automation Controllers (PAC); Organize and order PLC control components in order to maintain plant process control systems. Work with corporate IT staff as required with miscellaneous network and computer activities. Must be able to prepare technical reports for documenting issues/changes to equipment. Must be able to manage projects for implementing changes and improvements. Employee must be willing to be on call to support production needs. Installing and terminating electrical, pneumatic and fluid connections; Inspecting and testing the operation of instruments and systems to diagnose faults; Removing, repairing, adjusting and replacing components; Calibrating components and systems; Assisting engineering in plant design, modification and hazard analysis; Maintaining various computer-based control systems; Performing scheduled maintenance programs; and, Keeping up-to-date with advances in technology in industry and the trade. Some of the instruments include transmitters, analyzers, sensors, detectors, signal conditioners, recorders, controllers and final control elements. They are used in industry to measure and control variables such as pressure, flow, temperature, level, motion, force and chemical composition. Successful candidates will also demonstrate the following skills and personal traits Ability to plan and prioritize tasks across multiple projects Self-motivated and highly organized with good time management skills Detail oriented work style Dedication and commitment to meeting expectations Team Player/Cooperative, yet assertive Ability to work in an often fast paced, hectic, and demanding environment Must have exceptional problem solving skills Strong verbal and written communication skills Must have proven experience in PLC logic and programming with Allen Bradley PLCs and other types of controllers. Must be able to create and read logic and flow diagrams for program design, programming, simulation and testing, and start-up Lean Manufacturing

Bemana is seeking an Industrial Electronic Controls Technician to join a trusted leader in industrial electronic repair and sales located in Danville, VA. This company specializes in diagnosing and repairing industrial electronic controls. This is a hands-on, in-shop role perfect for a technician who thrives on component-level troubleshooting and bringing electronics back to life. What's In It For You Up to $32/hr. If your target pay is higher, we still encourage you to apply-we could request adjustments based on experience and market conditions. Comprehensive benefits package including health, dental, and life insurance. Steady, diverse repair work supporting customers nationwide Family-oriented team culture that values humor, collaboration, and autonomy. Key Responsibilities Diagnose and perform component-level repairs on a variety of industrial electronic equipment, including: AC & DC Drives, HMI Panels, Servo Motors & Drives, PLCs, and more. Perform hands-on troubleshooting, testing, and diagnostics using company-provided test equipment. Work extensively on VFD systems, which make up majority of all repairs. Maintain accurate repair records and communicate effectively with team members. Qualifications 3+ years of component-level electronic repair experience Proven ability to diagnose and repair on the component level Bring your own basic hand tools (screwdrivers, cutters, etc.); all specialized testing equipment is provided. Positive attitude, self-motivation, and ability to work both independently and as part of a close-knit team. Application Process If your experience matches the description above, submit your resume, and one of our recruiters will be in touch to tell you more about the position and learn more about your experience and aspirations. If your experience does not match this job description, we still encourage you to reach out to one of our recruiters, so we can learn about your professional aspirations for future job openings. About Bemana Bemana provides recruiting services to the nation's equipment and industrial sectors. Our clients and candidates value us for our specialized recruiting expertise, vast knowledge of the equipment and industrial job market, and ability to solve their most challenging employment needs. We have successfully recruited thousands of top-level professionals filling a wide range of management, sales, engineering, and technical positions across the nation. Welcome to Bemana and we look forward to getting to know more about you. Referral Program Bemana offers a $500 reward for referrals that lead to a hire. So, if this job or location is not for you, but you know someone that might be interested, send them this link and we'll send you a check if they get hired. Terms & conditions apply.

Bemana is seeking an Industrial Electronic Controls Technician to join a trusted leader in industrial electronic repair and sales located in Danville, VA. This company specializes in diagnosing and repairing industrial electronic controls. This is a hands-on, in-shop role perfect for a technician who thrives on component-level troubleshooting and bringing electronics back to life. What's In It For You Up to $32/hr. If your target pay is higher, we still encourage you to apply-we could request adjustments based on experience and market conditions. Comprehensive benefits package including health, dental, and life insurance. Steady, diverse repair work supporting customers nationwide Family-oriented team culture that values humor, collaboration, and autonomy. Key Responsibilities Diagnose and perform component-level repairs on a variety of industrial electronic equipment, including: AC & DC Drives, HMI Panels, Servo Motors & Drives, PLCs, and more. Perform hands-on troubleshooting, testing, and diagnostics using company-provided test equipment. Work extensively on VFD systems, which make up majority of all repairs. Maintain accurate repair records and communicate effectively with team members. Qualifications 3+ years of component-level electronic repair experience Proven ability to diagnose and repair on the component level Bring your own basic hand tools (screwdrivers, cutters, etc.); all specialized testing equipment is provided. Positive attitude, self-motivation, and ability to work both independently and as part of a close-knit team. Application Process If your experience matches the description above, submit your resume, and one of our recruiters will be in touch to tell you more about the position and learn more about your experience and aspirations. If your experience does not match this job description, we still encourage you to reach out to one of our recruiters, so we can learn about your professional aspirations for future job openings. About Bemana Bemana provides recruiting services to the nation's equipment and industrial sectors. Our clients and candidates value us for our specialized recruiting expertise, vast knowledge of the equipment and industrial job market, and ability to solve their most challenging employment needs. We have successfully recruited thousands of top-level professionals filling a wide range of management, sales, engineering, and technical positions across the nation. Welcome to Bemana and we look forward to getting to know more about you. Referral Program Bemana offers a $500 reward for referrals that lead to a hire. So, if this job or location is not for you, but you know someone that might be interested, send them this link and we'll send you a check if they get hired. Terms & conditions apply.

The Instrumentation & Automation Controls Technician/Electrician will ensure instrumentation and advanced automation, at Eden, WI plant, is installed and maintained to meet operating objectives and support remote operations requirements. This position will focus on developing, installing, and maintaining instrumentation and control systems for all plant processes. Responsibilities * Provide PLC/HMI technical support for remote control room and plant operations * Ensure all process control systems and networks remain operational and up to date * Perform trouble shooting of the PLC and control network as required * Analyze and identify process improvement opportunities including safety, environmental performance, and product quality at remotely operated sites * Communicate with mechanics, technicians, supervisors, process engineers, and operations personnel to ensure process automation and instrumentation is functioning as expected * Effectively implement management of change practices and procedures. * Knowledge and ability to troubleshoot and make all electrical repairs including running conduit and wire without supervision * Able to read, understand, and design electrical schematics * Able to operate all electrical testing equipment * Able to plan and perform all work assignments * On call for jobs which you are qualified for * Understand and communicate with the lead and supervisor * Perform required housekeeping * Inspect equipment in area on daily basis, and report safety and/or maintenance items * Perform other tasks as directed by lead or supervisor Qualifications * Experience with Rockwell/Allen-Bradley PLC software and hardware and HMI development and maintenance * Certificate in Mechatronics or electrical certification. Equivalent combination of experience and education will be considered * Excellent communication skills (written and oral) and interpersonal skills (ability to motivate, coach, and develop people) * Well organized and able to process large amounts of complex information, effective operational troubleshooting skills and decision-making skills * Computer literate, knowledge of Microsoft programs, and JD Edwards Physical Requirements Critical to the Job * Ability to climb ladders and work at heights * Lifting ability up to 65 lbs. * Standing, walking, and working while wearing full personal protective equipment * Ability to work in extreme temperatures * Ability to work nights during annual maintenance outage

We are searching for an HVAC Controls Technician. Troubleshoot and determine the need for repairs or replacement of instrumentation and end devices. Loop check and provide commission start-up assistance to a programmer. Set-up and start Viable Frequency Drives (VFD's). Install and terminate instrumentation per layout drawings and wiring diagrams Qualifications Minimum of 3 years of experience in programming Tridium HVAC controls systems preferred Minimum of 3 years of experience in HVAC service field preferred Carrier CCN and i-Vue experience a plus Electrical experience including routing of conduit and ability to read electrical schematics a plus Must be willing to travel to out of town job sites and occasional extended stay periods (usually 1 to 2 weeks) What We Offer Supportive work environment Opportunity to learn additional skills as well as upward mobility Eight paid holidays Three weeks of vacation first year Company paid life insurance, short and long term disability 401(k) match of 100% up to 4% AC Corporation is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Job DescriptionJob Title: Electromechanical Technician- Up to $36.16/hour! Follow procedures to perform required PM programs and general maintenance tasks including electrical, mechanical, pneumatic and hydraulic repairs Read and interpret electrical, mechanical, pneumatic and hydraulic schematics for troubleshooting and repair of all plant equipment Use and troubleshoot variable speed AC and DC drive controllers. Understand servo motion controls, incremental and absolute position encoders and resolvers Analyze and repair PLC controlled equipment using the appropriate techniques and peripheral equipment Conduct root cause failure analysis and use problem solving techniques to ensure effective repairs on equipment Work to continuously improve the machines and the standardized procedures used to maintain them. Core Skills and Qualifications: High school diploma or equivalent required. Minimum two years' experience as an Electromechanical Technician. Strong electrical and mechanical troubleshooting experience required. Technical/vocational training and/or associate's degree preferred. Previous PLC experience with a working knowledge of Allen Bradley and/or Siemens PLCs. Must be a team player, have great communication skills and be flexible to accomplish the necessary tasks. Demonstrated ability to maintain accurate records, logs and files in a timely manner. About Spark Packaging: Spark Packaging is a Michigan-headquartered recruiting and staffing company that connects great talent with great employers. We understand that finding a new position can be stressful and identifying top talent can be challenging. For us to maximize successful placement and retention, we start by listening to and understanding each of our clients. We believe in face-to-face interaction and having a solid understanding of our client's business before placement. We pride ourselves in team development as it matches our purpose as an organization to continually create career opportunities.

Service Technician _______________________________________________________________ Department: Field Operations Reports to: Area Service Manager FLSA: Non-exempt (Hourly) Schedule: Monday-Friday, 8am-5pm Why You Should Join Us! A comprehensive health plan that includes medical, dental, and vision coverage to ensure you and your family have access to the care you need A 401(k)-retirement plan with a generous company match to help you save for your future and achieve your financial goals Other fringe benefits including Birthday & Anniversary bonus, company-wide discounts, legal services, short & long-term disability, etc. Positive work environments that offer work/life balance and professional growth Mission-driven work making a global impact with local roots The opportunity to have hands on work experience with industry leading, innovative technology Position Summary The Service Technician is responsible for installing, servicing, and troubleshooting alcohol monitoring devices while maintaining a safe, organized work environment and delivering excellent customer service. Essential Duties and Responsibilities The essential functions include, but are not limited to the following: Installation, servicing, troubleshooting, and removal of all alcohol monitoring devices Fulfill daily operational duties of assigned facility which include: Operate a clean, organized and hazard free work environment Conducts training sessions covering use of products to customers Maintain a positive and caring atmosphere for customers and employees Consistently perform monthly inventory audits Assist other shops in surrounding area when applicable Management of daily hours, ensuring 40 hours or less weekly Correspondence with management and/or lead technicians when challenges are presented Maintain the integrity, confidentiality, and security of client information Adherence to all state and federal rule, regulation and statute Any other duty, as assigned Qualifications High School Diploma or equivalent 1 years' experience with 12V 1 years' experience in a customer service role Basic computer skills Strong written and verbal communication skills Detail orientation PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is required to sit, kneel, and stand regularly while installing alcohol monitoring devices into tight spaces. The employee frequently is required to walk, reach or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. Overtime is limited but required occasionally, and continuous interruptions require flexibility and a willingness to modify plans and behavior when necessary. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills aptitudes and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills or abilities. The starting pay range for this position is $18.00 to $20.00 hourly. Final compensation will be determined based on experience, qualifications, and overall fit for the role.

Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate. The Eurofins network of companies is the global leader in food, environment, pharmaceutical and cosmetic product testing and in agroscience Contract Research Organisation services. It is one of the market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, advanced material sciences and in the support of clinical studies, as well as having an emerging global presence in Contract Development and Manufacturing Organisations. It also has a rapidly developing presence in highly specialised and molecular clinical diagnostic testing and in-vitro diagnostic products. In over 30 years, Eurofins has grown from one laboratory in Nantes, France to 58,000 staff across a decentralised and entrepreneurial network of 900 laboratories in over 54 countries. Eurofins companies offer a portfolio of over 200,000 analytical methods to evaluate the safety, identity, composition, authenticity, origin, traceability and purity of biological substances and products. In 2021, Eurofins generated total revenues of EUR 6.72 billion, and has been among the best performing stocks in Europe over the past 20 years. Job Description Metrologist responsibilities include, but are not limited to, the following: Conducting PQ/PM activities on chromatography systems Mapping temperature and humidity on refrigerators, freezer and stability chambers as needed. Managing assets in the Blue Mountain RAM platform Writing and revising technical reports Writing and revising SOPs and work instructions. Knowledge of ISO/IEC 17025, GLP and cGMP Qualifications The ideal candidate would possess: Strong computer skills; excellent proficiency in Microsoft Office, Word, Excel, PowerPoint, SharePoint Strong Technical and Mechanical skills. Strong team player Strong writing skills Ability to work independently and maintain self-motivation Detail oriented Strong scientific background Strong organizational skills Strong communication skills in person. High level of professionalism; professional appearance as a client-interfacing ambassador of the company Strong customer-service orientation Basic Minimum Qualifications: Bachelor's degree in a scientific field or commensurate experience. Additional Information The position is full-time, Monday through Friday, 8 a.m. to 5 p.m., with overtime as needed. Candidates currently living within a commutable distance of Winston-Salem, North Carolina, are encouraged to apply. Ability to work overtime as required. Tasks require repetitive motion and standing for long periods of time. May be required to respond to off-shift operational issues. Excellent full-time benefits, including comprehensive medical coverage, dental, and vision options Life and disability insurance 401(k) with company match Paid vacation and holidays #LI-EB1 Authorization to work in the United States indefinitely without restriction or sponsorship Eurofins USA PSS Insourcing Solutions is a Disabled and Veteran Equal Employment Opportunity employer.

Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate. The Eurofins network of companies is the global leader in food, environment, pharmaceutical and cosmetic product testing and in agroscience Contract Research Organisation services. It is one of the market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, advanced material sciences and in the support of clinical studies, as well as having an emerging global presence in Contract Development and Manufacturing Organisations. It also has a rapidly developing presence in highly specialised and molecular clinical diagnostic testing and in-vitro diagnostic products. In over 30 years, Eurofins has grown from one laboratory in Nantes, France to 58,000 staff across a decentralised and entrepreneurial network of 900 laboratories in over 54 countries. Eurofins companies offer a portfolio of over 200,000 analytical methods to evaluate the safety, identity, composition, authenticity, origin, traceability and purity of biological substances and products. In 2021, Eurofins generated total revenues of EUR 6.72 billion, and has been among the best performing stocks in Europe over the past 20 years. Job Description Metrologist responsibilities include, but are not limited to, the following: Conducting PQ/PM activities on chromatography systems Mapping temperature and humidity on refrigerators, freezer and stability chambers as needed. Managing assets in the Blue Mountain RAM platform Writing and revising technical reports Writing and revising SOPs and work instructions. Knowledge of ISO/IEC 17025, GLP and cGMP Qualifications The ideal candidate would possess: Strong computer skills; excellent proficiency in Microsoft Office, Word, Excel, PowerPoint, SharePoint Strong Technical and Mechanical skills. Strong team player Strong writing skills Ability to work independently and maintain self-motivation Detail oriented Strong scientific background Strong organizational skills Strong communication skills in person. High level of professionalism; professional appearance as a client-interfacing ambassador of the company Strong customer-service orientation Basic Minimum Qualifications: Bachelor's degree in a scientific field or commensurate experience. Additional Information The position is full-time, Monday through Friday, 8 a.m. to 5 p.m., with overtime as needed. Candidates currently living within a commutable distance of Winston-Salem, North Carolina, are encouraged to apply. Ability to work overtime as required. Tasks require repetitive motion and standing for long periods of time. May be required to respond to off-shift operational issues. Excellent full-time benefits, including comprehensive medical coverage, dental, and vision options Life and disability insurance 401(k) with company match Paid vacation and holidays #LI-EB1 Authorization to work in the United States indefinitely without restriction or sponsorship Eurofins USA PSS Insourcing Solutions is a Disabled and Veteran Equal Employment Opportunity employer.

**Roles and Responsibilities:** Essential Functions (including physical and environmental tasks required to perform job): + Assemble jet engines, including performing various machining and repair operations, using hand tools, specialized tools, equipment and fixtures. + Coach, guide and train other team members and function in a team-based environment. + Work from complex product drawings, manuals, specifications and other company/customer specifications.set-up, operate, adjust and troubleshoot all tools and equipment used in the assembly processes. + Perform inspections required to assure that the quality plan is achieved **Qualifications/Requirements:** + A high school diploma or GED + FAA issued Power plant license **Desired Characteristics** **:** + Excellent oral and written communication skills + Ability to work in a team environment + Ability to learn new tasks and become multi-skilled + Willingness to work flexible hours/shifts + Ability to teach and coach others + Ability to make and accept responsibility for decisions + Willingness to work in multiple roles with varied responsibilities _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Associated scaffolding hoist / warehouse service technician is responsible for a variety of functions that range from processing incoming shipments and materials, to picking and filling orders for customer. The technician is required to work as a member of a team and as an individual based on the task must be a self-starter. Other responsibly include organizing, inspecting, and repairing equipment so that it is in good and safe working condition before being put back into service. Employees must also practice safe work conditions to prevent injuries and hazards from arising. Requirements: Be at least 21 years old Have and maintain a valid NC driver's license Proficiency in verbal communications in the English language Proficiency in reading and writing the English language Have a High School diploma or GED equivalent. Basic knowledge of electrical schematics DUTIES AND RESPONSIBILITIES Include the following. Other duties and responsibilities may be assigned at later date. Must be mechanically and electrically inclined. Overhaul and repair of hoist motors Ability to troubleshoot and repair electrical and pneumatic equipment Perform other duties as assigned Process, prepare, and palatize orders for shipment Sort, organize, inspect, repair, complete service reports, and return equipment to proper storage locations. Wear proper safety equipment and apparel (PPE) Ability to follow instructions in an efficient manor Problem solving and organizational skills Reliable and dependable Training: Technicians must complete required training which includes: Forklift Fire prevention, lockout tag out, personal protective equipment, blood borne pathogens Manufactures technical training for hoist Other course may be required as equipment changes.

+ Amentum is seeking an CNC Machine Repair Technician IV at the subject matter expert level to join our Facilities - Operations and Maintenance team based in Durham, NCThe specialist performs as the technical expert with respect to installing, troubleshooting, servicing, and documenting the electrical/electronic, mechanical and controls needs of automated equipment in an industrial environment. Must be capable of providing instruction, mentoring and training less skilled technicians as needed. Effectively communicates with the site management team and the customer to understand requirements, solve complex electrical problems, and provide solutions to manufacturing problems. The CNC Machine Repair Technician must have the ability to identify troubleshoot and correct any operational or safety-related issues and perform independent equipment root cause evaluations to identify potential equipment failures. Identifies and reports cost savings for documentation. **What impact you'll make:** As a member of the Maintenance team you will thrive in a collaborative environment. In this role, you'll play a critical part in maintaining, troubleshooting, and optimizing a variety of sophisticated manufacturing equipment. If you're passionate about technology, enjoy problem-solving, and want to be part of a company that values continuous improvement, we want to hear from you.The scope of service includes the maintaining, development, execution, and continuous improvement of the preventative and predictive maintenance activities at the client's site. Some of the equipment included in the scope is: + Multi-Axis Wet and Dry CNC Grinders + Balancers + Central Coolant Systems + Pumps and Exhaust systems + Hydraulic and electrical systems **Responsibilities:** + Troubleshoot and repair specialized mechanical, electrical, and electronic equipment across the facility. + Perform and assist with the alignment and leveling of CNC machinery to ensure optimal performance. + Communicate detailed updates on ongoing repairs to ensure smooth shift transitions. + Collaborate with Facilities Engineers and external vendors to resolve complex technical issues. + Provide technical support during the installation or rearrangement of production equipment. + Continuously seek professional growth through available training and self-study in electrical, electronic, and mechanical systems. + Actively participate in customer lead Lean initiatives and continuous improvement efforts focused on safety, quality, and productivity. + Fulfill all other assigned duties and support team-based operations to meet the needs of the customer. + Works with AC/DC control voltage's from (12-24V) through medium voltage motor controls and 480 volts, 3 phase. + Diagnoses, troubleshoots, maintains, and repairs Machine Tools and equipment. + Must understand and be capable of instrumentation and equipment calibration, for optimum performance. + Reads and understands electrical/electronic and mechanical schematics. + Demonstrates through understanding of AC/DC motor control. + Demonstrates thorough understanding of hydraulic and pneumatics as related to electronic controls. + Identifies, reviews, and recommends activities and upgrades/retrofits to improve maintenance and operation methods and equipment performance. + Creates and modifies site operations procedures for equipment and recommends facilities reliability improvements. + Responds and provides service and feedback to the customer on all work orders while assuring compliance with codes, regulations and industry standards. + Understands company policies and enforces safety regulations. + Safely performs functions of the position including following proper safety guidelines such as performing job hazard analysis, following lockout/Tag out procedures, and wearing PPE as required. + Operates various measuring, diagnostic and testing instruments to help troubleshooting and repair. + Operates a variety of equipment such as hand tools, laptop computers and diagnostic hardware to perform work. + Demonstrates a high level of urgency and flexibility to meet emerging business needs. + Exhibits strong leadership skills, such as motivation, delegation, ownership, leading by example, well-developed organizational skills, excellent communication skills, etc. + Possesses the ability to lead complex technical work utilizing a wide variety of resources, including computers. + Cutting or grinding processes is highly desirable. + Able and willing to work in a tobacco-free environment and wear required personal protective equipment (PPE) with or without reasonable accommodation. + Other duties as assigned by Manager or Supervisor. **Minimum Requirements:** + Associate degree in Electrical/Electronic Engineering Technology, Mechatronics, or a minimum of 5 years of experience in industrial machinery maintenance with strong troubleshooting skills (electrical, electronic, and mechanical). **Additional Information:** + Qualified applicants who are offered a position must pass a pre-employment substance abuse test. + This position requires a valid Driver's License. + This position does not include sponsorship for United States work authorization. + This position will require the ability to obtain a security access badge at our client's location. + This position may require various shifts, weekends, and alternative work schedules. **Physical Requirements:** + Requires the ability to regularly lift 50 lbs. + Requires the ability to regularly climb extension ladders, roof ladders, stepladders, and stairs at least 10 times during shift. + Requires the flexibility to bend/stoop, squat repetitive during shift. + Requires the ability to regularly kneel repetitive for shift. + Requires the ability to move in a 90-degree fashion on a repetitive basis for shift. + Requires the ability to stretch/reach on a repetitive basis for shift. + Requires the ability to walk extensively throughout the plant during shift. + Requires the ability to safely operate an Ariel Lift. + Requires the use of a Company/Client approved utility knife. + Requires the ability to differentiate colors pertaining to wire color-coding. + Some tasks will require repetitive wrist movement. + Requires ability to read and understand information contained in a variety of documents or displayed on a computer screen. + Requires ability to use a variety of office equipment and to operate a computer keyboard to access databases, to send/receive messages and to prepare documents. + Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress. + Requires the ability to communicate with others on the telephone and in one-on-one or group discussions, meetings and presentations. **Special Requirements:** + Wear steel toe safety shoes, safety glasses, gloves, hard hats and other Personal Protective Equipment as needed. + Cope with demands (stressors) that are associated with the job and/or the work environment so that acceptable levels of performance and overall contribution are maintained Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .