Quality Engineer jobs at Dart Container - 553 jobs

Eaton's IS AER FED division is currently seeking a Quality Manager. This position will be located at our Torrance, CA facility. The Quality Manager ensures the quality of Eaton's products through the development and enforcement of quality and manufacturing processes. In this role, you will develop and implement plans to achieve operation and group quality goals, direct the implementation and ongoing oversight of the Aerospace Quality Leading Indicators and Quality Best Practices. Ensure compliance to customer quality requirements and acts as principle contact for customer on quality issues. Manage customer communications, corrective actions, customer NOEs, supplier quality, shop floor quality, and Eaton PPAP. The expected annual salary range for this role is $125000 - $183000 a year. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: • Oversee, hire, and mentor all areas of quality personnel including return material (warranty), receiving inspection, final inspection, source inspection, supplier quality, manufacturing quality, customer quality, and quality compliance. • Monitor overall plant quality progress and performance and makes corrections as needed. • Act as a primary organizational contact for customer concerns and ensures appropriate corrective actions are deployed as necessary. • Ensure organizational readiness for customer and other third party assessments. • Deploy Eaton Business System tools, where appropriate or required, to improve Quality Management System effectiveness (i.e. EQS, QLI, PPAP, WISPER, etc.). • Ensure that necessary organizational certifications and regulatory requirements are obtained, maintained, and improved. (i.e. QMS AS9100 certification, ESD controls, etc.). • Develop and deploy effective FMEAs and Control Plans using Eaton PPAP to insure process controls and standard work is being utilized effectively on the shop floor. • Develop, set and achieve goals associated with the manufacturing and supplier quality engineering teams that are aligned with the Quality Department and production teams. • Ensure the promotion and awareness of customer and regulatory requirements throughout the organization. • Direct the disposition and analysis of returned material, internal non-conforming product, and delegated MRB authority. Ensure that actions around top pareto items are identified and completed. • Manages customer portals and customer scorecards to ensure actions are being completed and customer requirements are being met. • Maintain and action quality metrics: FPY, Customer and Intra-site DPPM, CONC, Scrap $, Warranty $, Customer Corrective Action OTD, Customer Audits, Supplier DPPM, Supplier Corrective Action OTD. Qualifications: Required (Basic) Qualifications: • Bachelor's degree from an accredited institution. • Minimum of five (5) years experience in Quality or in a Manufacturing environment. • Must be legally authorized to work in the United States without company sponsorship, now or in the future. • This position requires access to export-controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must be a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (green card holder), (iii) refugee under 8 U.S.C. 1157, or (iv) asylee under 8 U.S.C. 1158. • No relocation benefit is being offered for this position. Only candidates within a 50-mile radius of Torrance, CA will be considered. Active-Duty Military Service member candidates are exempt from the geographical area limitation. Preferred Qualifications: • Minimum of three (3) years experience supervising a technical team. • Six Sigma Green Belt or Black Belt certification. • ASQ CQE or CMQOE. • Quality System experience (e.g. AS9100, ISO 9001, TS16949). Skills: • IPC and JST knowledge. • ANSI ESD S20.20 knowledge. • Working knowledge of Quality Management Systems standards and Aerospace Regulatory Requirements. • Read and understand Blueprints, Specifications, and Requirements. • Advanced skills with MS Office software. • Limited travel may be required (10%). • Opportunity to gain exposure to and work with many cross functional teams. #LI-CB3 We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at 1-800-###-#### to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

At Trident Maritime Systems - Heavy Equipment Group, we don't just build systems-we build careers. As a leader in the marine and defense industry, we're seeking innovative, forward-thinking professionals who are ready to tackle complex challenges and deliver real-world solutions. We are looking for a Quality Manager to join our Team! This is position is onsite, can be located at any one of the following (4) locations and will travel between these locations as needed: Michigan (Kingsford, Ontonagon, Iron River) and Wisconsin (Rhinelander). The Quality Manager will build and maintain a strong team to ensure compliance with quality requirements and provide actionable information to the business to enable functional managers to prioritize and drive improved quality performance. Lead and improve the quality function in close cooperation with customers and company management team to ensure optimum quality, product reliability and economical costs. Ensure customer-imposed quality requirements and governing body requirements are understood and followed. Maintain a rapid issue resolution process in cooperation with engineering, purchasing, and manufacturing. MAJOR DUTIES: Provide leadership to the Quality team, including effective hiring, training, coaching, and mentoring to ensure the team is aligned to the company's goals and expectations. Devise, organize and implement quality assurance and control programs, quality standards, inspection techniques, monitoring schedules, actionable metrics, and preventive measures. Responsible for establishing strategic quality plans and procedures at all levels so quality improvement efforts will meet or exceed internal and external customers' needs and expectations. Ensure compliance with ISO 9001 quality standards. Perform and report on internal or external quality system audits. Ensure calibration program is in conformance with established standards. Responsible for customer, supplier or performance issues and contacting vendors or customers regarding dissatisfaction or complaints arising from inferior quality. Assess potential new suppliers along with supplier quality development. Report on the performance of the quality management system. Including, but not limited to, controlling the acceptance of materials, production accuracy, end product quality and opportunities for improvement. Investigate quality system failures and identify solutions. Identify unique contract quality requirements and assure they are flowed down to manufacturing. Other duties as assigned. EDUCATION PREFERRED/SPECIAL NOTES: Familiar with ISO 9001 and the maintenance of such processes Six Sigma and Lean Manufacturing Training EXPERIENCE PREFERRED/SPECIAL NOTES 5+ years of experience in Lean Manufacturing/Quality environment. Experience managing and leading a Team is preferred Exceptional written and verbal communication Strong interpersonal skills in leading direct reports and cross-functional teams Strong technical background with Quality standards and systems. Ability to write precise technical reports and work instructions and procedures in accordance with Quality standard requirements. PHYSICAL REQUIREMENTS: Travel to HEG Plant locations, customer and supplier locations Extended periods of standing on the shop floor Equal Opportunity Employer of Protected Veterans and Individuals with Disabilities/Affirmative Action Employer. We comply with Department of Labor Wage and Hour Division.

Are you ready to be part of a team that values safety, continuous improvement, quality, and employee well-being? CHEP is looking for a motivated Quality Lead to join our team in Pendergrass, GA. **2nd shift hours are Monday through Thursday 6p-4:45a with shift differential incentive pay** Job Description Summary Oversee and manage quality control initiatives, ensuring compliance with corporate quality guidelines and driving continuous improvement efforts to optimize plant performance. Lead audits, training, and issue resolution activities to uphold quality standards and promote a culture of excellence within the plant. Act as a key liaison with internal and external stakeholders, addressing quality concerns and fostering strong relationships with customers and vendors. Key Responsibilities May Include: Conduct and validate quality audits across the plant, ensuring all processes align with corporate policies, goals, and quality objectives. Train and develop plant personnel on quality guidelines and best practices, promoting a continuous improvement mindset and fostering quality awareness across teams. Track and report key quality performance metrics, including Acceptable Quality Limits (AQL), Pest Control Program (PCP) compliance, and customer complaints. Investigate and resolve quality issues, including customer complaints and rejected loads, using root cause corrective actions (RCCA) and implementing preventive measures. Maintain and manage quality-related documentation, ensuring all records meet corporate and regulatory standards. Collaborate with regional quality teams and internal stakeholders to address plant-specific quality concerns and ensure consistency in quality management across locations. Lead continuous improvement projects targeting quality systems and processes, working with cross-functional teams to implement solutions that enhance operational performance. What we Offer: Competitive Pay w/ Shift Differential Benefits Day 1! 401K w/ company match (up to 4%) FREE company-paid vision, short-term disability, and life insurance!! FREE company-provided PPE and safety equipment Tuition reimbursement, parental leave, childcare assistance, profit sharing, and MORE!

As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers - large and small - package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility. People • Customers • Trust We are seeking resumes for a Process Control Engineer's in our Valdosta, GA. Paper Mill. The Process Control Engineer is responsible for coordinating the planning, organizing, programming, and maintenance of all mill PLC, Distributed, and Quality Control Systems. Responsible for managing a group of hourly union journeyman technicians on a daily basis for programming PLC and Distributed Control Systems based on operational and engineering needs. The engineer will help to define and participate in the development of control system daily and preventative maintenance programs to improve reliability of all included control systems in the mill. Principle Accountabilities: Providing technical direction, assistance, and solutions to hourly electrical maintenance and operating personnel. Work with key mechanical, reliability maintenance, and engineering personnel to support daily and monthly scheduled maintenance outages and annual outage jobs within the field of process control engineering. Some crossover activities to the electrical/mechanical maintenance programs will be required to deliver complete programs for all types of equipment. Work with maintenance/engineering and operations personnel to complete maintenance and capital projects. Provide management and programming support including: necessary programming, training, stocking of spare parts, preventive maintenance checklists, drawing creation, and updates for the maintenance/engineering personnel as needed. Supports the Mills goals for safety, environmental, and other areas of need. Focus on Process Control supervision of hourly union work force, supervision of programming of all mill control systems for daily activities, and capital projects and control system equipment reliability. Manage the control system equipment tracking programs and systems PM programs. Utilize predictive & preventative maintenance programs to identify and correct equipment issues. Input and update equipment information and documentation. Develop equipment manuals for precision inspection and maintenance of the control systems in the mill. Manage assigned work for monthly and annual outages. Assist with MS Project timelines for monthly and annual outages. Plan and execute capital projects for maintenance replacements of control systems equipment. Effectively manage jobs for best result at lowest cost. Look for opportunities to solve issues, reduce cost, and improve planning performance. Solve problems utilizing the mill's RCFA program. Effectively manages contractors for performing jobs. Performs other responsibilities as needed. Basic Qualifications Bachelor's degree in Electrical or Chemical Engineering or equivalent education and experience required. A minimum of 2-5 years' experience, or the equivalent, in Electrical or Chemical Engineering. Experience using Microsoft Excel, Outlook, PowerPoint, Word, Project, and AutoCAD. Successful completion of drug screen required and authorization to work in the U.S. Preferred Qualifications Pulp & Paper industry experience preferred. The successful candidate must possess the following Knowledge, Skills & Abilities: Ability to be able to work well under pressure and within time constraints, multi-task, and build sound relationships with both internal and external customers Ability to exhibit excellent communication, analytical, organizational, and computer skills. Capable of independently making sound decisions through creative problem-solving, ambiguity, and change. Ability to work in a fast-paced environment and handle multiple requests simultaneously. Ability to read and understand technical correspondence, memos, instructions, and reports. Ability to apply skills to continuous process improvement while maintaining maximum levels of safety. Demonstrated leadership skills and abilities. Strong planning and follow up skills. Excellent people and process management skills. PAY & BENEFITS: PCA provides a competitive, comprehensive benefits package. Excellent Medical, Dental, and Vision 401k with company matching Retirement Savings Plan Educational Assistance Program 11 paid holidays 3 Weeks of Vacation Time Employee Assistance Program (EAP) All qualified applicants must apply at Careers.packagingcorp.com to be considered. PCA is an Equal Opportunity Employer - Veterans/Disabled and other protected categories.

: Central Transport LLC is one of the nation's most reliable and technologically advanced LTL (Less-than-Truckload) carriers to date. We are privately owned and have been servicing manufacturing & retail companies of all sizes for over 90 years now. With over 200 locations around the country, we pride ourselves on the continuous expansions that we have made and are still making strides to improve our operation systems to better service our wide network of clientele. Earlier this year, our business levels have reached the highest they've ever been; breaking our personal record that had been set the previous year. We like to credit our growing success with our ability to develop and provide opportunity for our team of employees so they can make advancements within our company. Our company values a positive attitude and the mindset of a winner. This position offers a competitive salary and benefits package, 401(k), paid vacation and life insurance. Role Description: We are currently seeking a Quality Supervisor (HU Control Supervisor) for our facility located out of Vandalia, Ohio. We are looking for experienced, detailed-oriented, forward thinking, and highly motivated candidates to serve as a leader amongst the department. If you love a challenge and are looking to take a step towards a rewarding career, this Quality Supervisor opportunity may be right for you. These individuals will report directly to HU Control at the Corporate headquarters and will not be absorbed into normal freight movement. They will work closely with other HU Control Hub Quality individuals as well as HU Control at the Corporate Office to produce a quality product for the movement of all freight in and out of the location. Shift: 2:00p.m. - 12:00a.m. Monday - Friday. Salary Range: $60,000 - $75,000 + up to 10% in bonuses The ideal candidate will possess the following: A bachelor's degree is preferred but not required 3-plus years of experience in LTL, distribution/logistics, transportation, operations management or knowledge of LTL freight movement Excellent written and verbal communication skills Knowledge of HU Control functions Knowledge of computer systems and handheld scanning technology Willingness to work off shifts Duties include, but are not limited to: Proper investigation on reported overages, shortages and damages involving the terminal Prevention and recuperation of customer goods due to damages Overseeing and enforcing outbound load quality Providing disciplinary action for load quality from other terminals Taking inventory of load bars and other tools that are used to secure the freight Daily, weekly and monthly reporting on all OS&D findings

At Kenco Logistics, you're more than just a team member-you're part of a company that values innovation, integrity, and a strong commitment to its people. As one of the leading 3PL providers in the U.S., Kenco offers a dynamic and supportive work environment where your ideas matter and your growth is a priority. With a focus on safety, sustainability, and continuous improvement, Kenco empowers employees to make a real impact in the supply chain industry while building rewarding careers. Join a company where your contributions help move the world forward-one shipment at a time. About The Position Site dedicated Industrial Engineers are in a co-managed environment with Operational leaders, setting the overall project priorities to deliver value to customer networks. This position supports the Kenco Operating System (KOS) model of cultural transformation through the integration operational excellence principles across the enterprise and its value streams to create a complete systemic view, leading to consistent achievement of results. **Relocation assistance is available. No sponsorship is available, now or in the future.** Functions Develop best practices and cost reduction activities Lead LMS (Labor Management System) integration efforts with WCS (Warehouse Control System) and WMS (Warehouse Management System) Facility Layout and MHE Design Partner closely with Customers and Kenco Operations to achieve project results Track value (Value Creation Index, or VCI) created from all assigned projects Ensure Work Measurement systems are developed, implemented and effective Ensure warehouse flow, conduct zoning and slotting assessments, profile analysis etc. Continuous Improvement of the Kenco Operating System (KOS) Conduct process observations and time-motion studies Help sites analyze labor management data to drive operational decisions Line Balancing and one-piece flow simulation analysis Zoning/slotting and Profile analysis Takt time methods Value Stream Mapping (VSM), process mapping and data collection Measurement Systems Analysis (MSA) Process Capability and performance (Cp/Cpk) Exploratory Data Analysis, Hypothesis Testing and Analytical methods Process Improvement Methods Waste Analysis (Value Added vs Non-Value Added activities, VA-NVA) Statistical Process Control (SPC) Control Charting and Control Planning Gain input from customers to define project priority, set goals and objectives and obtain feedback on performance Align the organization around lean principles and drive establishment of lean systems in all areas through use of Hoshin planning activities Ensure that the correct tools be utilized to solve the most important problems affecting our customer's satisfaction, quality, cost and delivery. Develop and implement appropriate companywide measurement systems that drive correct behaviors and support attaining business goals Utilize lean and six sigma methodologies to reduce waste and variation within the operation Understand Solutions design, Financial model, and Contract Pricing Qualifications Bachelor's degree in Industrial or Logistics Engineering or related discipline 0 - 2 years of applied experience in a distribution setting (or 3PL), or a Master's degree with 2 years of experience Lean Six Sigma Green Belt required Lean Six Sigma Black Belt preferred Proficiency in Project Management Experience with WCS, Automation solutions preferred Programming knowledge preferred (Python, R, C++) Experience in a customer facing role defining expectations and achieving results Demonstrated ability to effectively analyze data to identify trends, performance results, and opportunities for improvement Competencies Business Acumen - Knowledgeable in current and possible future policies, practices, trends, technology, and information affecting his/her business and organization. Communicate for Impact - Proactively communicate with all stakeholders throughout the life cycle of programs and projects. Influencing Others - Can quickly find common ground and can solve problems for the good of the organization with a minimal amount of noise. Authentically gains trust and support of peers. Managing Transitions/ Change Management - Effectively plans, manages and communicates changes in processes with appropriate stakeholders. Strategic Agility - Enable Kenco to remain competitive by adjusting and adapting to innovative ideas necessary to support Kenco's long-term organizational strategy. Travel Requirements This position is expected to travel approximately 25% or less. A passport is not required, but recommended. Disclosures For California residents - please enter or copy/paste the address below into your address bar to review an important notice regarding Kenco's privacy policy ********************************************************************************** The statements above are intended to describe the general nature and level of work being performed by employees assigned to this job. Other duties may be assigned as needed. The physical demands and work environment described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Kenco is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Per company policy, all internal job postings expire 14 days from the date they are posted. Benefits Offered: Medical insurance including HSA, HRA and FSA accounts Supplemental insurance including critical illness, hospital indemnity, accidental injury Dental Insurance Vision Insurance Basic Life and Supplemental Life Short Term and Long Term Disability Paid Parental Leave 401(k) Paid Time Off approximately 2 weeks (accrual begins on Day 1 of employment) Employer Paid Holidays- 10 days Kenco strives to provide a supportive, professional environment for all employees. As a part of Kenco, we expect our team to uphold our three key pillars: be honest, serve, and get better. Each should strive for operational excellence, pursue innovation, and want to grow with our company. Kenco Group is an Equal-Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status or disability, or any other characteristic protected by law. Please click the image to download the EEOC ‘Know Your Rights; Discrimination is Illegal' posting. *************************** For California residents please enter or copy/paste the address below into your address bar Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Join PTI Technologies as a Manufacturing Engineer II and dive into the dynamic world of the aerospace industry from our Oxnard, CA location. This onsite role offers the chance for manufacturing engineer graduates to apply their skills in CNC programming and work within a high-performance machine shop. You'll engage in projects that enhance production processes and uphold our core values of excellence and safety. Collaborate with seasoned professionals, contributing to cutting-edge aerospace innovations while gaining invaluable experience in a traditional yet evolving work environment. As a team member you'll be able to enjoy benefits such as Medical, Dental, Vision, 401(k), Life Insurance, Health Savings Account, and Paid Time Off. This is an exciting opportunity to grow your career in a thriving industry and make a real impact in aerospace engineering. Don't miss your chance to shape the future of aviation technology! PTI Technologies: Our Story PTI Technologies Inc. is a world leader in highly-reliable filtration and fluid control equipment and subsystems and miniature CAD/PAD devices, providing innovative, value-added solutions for a full range of mission, flight and life-critical operations across the Aerospace and Defense markets. Your role as a Manufacturing Engineer II As a Manufacturing Engineer II at PTI Technologies in Oxnard, CA, you will play a pivotal role in developing cost-effective manufacturing methods and processes within the aerospace industry. You will work under minimal supervision, taking the lead on various projects while guiding technicians and operatives within the machine shop. Your responsibilities will include evaluating and improving manufacturing methods, creating crucial process documentation, and designing efficient layouts for workspaces and equipment. You will collaborate with planning and design staff to ensure efficient production methods, and communicate with vendors to align on product specifications and procure necessary materials. Additionally, you will estimate production times and staffing needs, providing vital information for management decisions. By applying statistical methods, you'll help predict future manufacturing requirements, ensuring that PTI Technologies remains at the forefront of innovation and excellence in aerospace manufacturing. What we're looking for in a Manufacturing Engineer II To thrive as a Manufacturing Engineer II at PTI Technologies, candidates must possess a Bachelor's degree in Mechanical or Industrial Engineering and have 3-5 years of experience in a manufacturing environment. Proficiency in CNC programming and familiarity with machine shop operations are essential for success in this role. Strong language skills are crucial, as you will need to read and interpret technical documents, write reports, and effectively communicate with managers and clients. A solid foundation in mathematical concepts, including probability, statistics, and geometry, will be necessary for analyzing production data and estimating requirements accurately. Additionally, candidates should demonstrate creativity and ingenuity in applying engineering principles while being proficient in tools like MS Office and SolidWorks. Your problem-solving abilities and experience in real-world scenarios will enable you to lead projects efficiently and drive continuous improvement in our manufacturing processes within the aerospace industry. Get started with our team! We're looking for talented individuals like you to join our team and help us achieve our goals. If you're passionate, driven, and committed to making a difference, we want to hear from you! Don't wait - apply now and take the first step towards a fulfilling career with endless possibilities. Let's work together to make great things happen!

Eaton's IS AER FMC division is currently seeking a Lead Manufacturing Engineer in our Los Angeles, California facility! This is an onsite, Monday - Friday role, aligned to a 1st shift schedule. With almost 300 employees, the Los Angeles facility designs and manufactures quality valves, regulators, and other fluid controls used mostly by the Aerospace Industry. The expected annual salary range for this role is $107812.53 - $158125.04 a year. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: The Lead Manufacturing Engineer role includes the processes, tooling, and equipment to support the production of the fluid controls and actuation product line. This role will provide technical support and implement Lean Manufacturing principles in a production environment. You should have the ability to address technical issues through a problem solving framework with a focus on root cause, containment, and long term solutions. To provide methods of cost reduction for production and production-related activities. In this role you will: Implement Lean Manufacturing principles and utilize Six Sigma methodologies to develop and maintain robust manufacturing processes in order to increase productivity, reduce variation, and eliminate waste Utilize technical skills to troubleshoot and resolve issues related to product non-conformance and performance test failures for hydraulic, pneumatic, and electro-mechanical products. Go to management Lead root cause and correction action for manufacturing issues by utilizing problem solving tools such as 8D analysis and PFMEA's Identify, analyze, and implement cost reduction and productivity improvement projects in a production environment Ability to work on a cross-functional team to execute projects and ensure internal and external customer satisfaction Serve as a technical focal point to operators, team leaders, and other engineers. Serve as a technical contact with internal and external customers, manufacturing, manufacturing engineering, quality assurance, product support, material, and suppliers insuring their satisfaction Develop process plans, fixtures, and tooling in support of Continuous Improvement Processes Research, recommend, and execute capital equipment projects Ensure processes meet Environmental, Safety, and Health (MESH) & regulatory requirements Analyze data from OEM returned products, and implement improvements to increase the processing yield and quality of the components, minimizing the number of returned units Analyze data from mechanical components to implement improvements to increase the producibility of the components, minimizing the assembly and test cycle times Technical expertise on hydraulic and pneumatic products with emphasis on producibility and first time pass Collaborate with peers and management to determine key goals and objectives, and corresponding metrics, to be completed during a determined period (usually one year). Review and amend these actions as appropriate. Focus on timely achievement of these goals and objectives Qualifications: Required Qualifications: Bachelor's degree in Engineering from an accredited institution is required Minimum five years experience in a manufacturing environment This position requires access to export-controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must be a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (green card holder), (iii) refugee under 8 U.S.C. 1157, or (iv) asylee under 8 U.S.C. 1158 Relocation assistance is not available for this position. Only candidates in the immediate geographic area (50 mile radius) of Los Angeles, CA will be considered Preferred Criteria: Previous aerospace experience Masters degree in engineering Position Criteria: Experience with assembly and test operations of hydraulic, pneumatic, or electro-mechanical products. Experience in Lean Manufacturing, Kaizen or other Continuous Improvement Processes. Experience with MRP systems. Familiarity/experience with Six Sigma & Problem Solving methodologies Experience with working on cross-functional teams. Good technical writing, communication, and presentation skills. Proficiency with computer based methods and tools. #LI-CD1 We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at 1-800-###-#### to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's Power Components Division is currently seeking a Manufacturing Engineer. This is an on-site position based at our Beaver, PA location. The expected annual salary range for this role is $68000 - $99000 a year. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: The Manufacturing Engineer is responsible for providing a broad range of professional continuous improvement support to the manufacturing operations. Tasks include providing lead project responsibility for the execution of projects and project assignments within the Operational Excellence department; develop engineering and process control documentation for manufacturing needs; provide coordination and technical guidance to production personnel as appropriate. You will support planning and execution of technical projects related to manufacturing methods, material flow, processes, facilities, systems, and equipment upon gaining comprehensive knowledge of existing capabilities and new technologies. This role will manage capital projects, evaluate, and initiate orders for machinery and other equipment required for production processes. This role focuses heavily on reducing waste, cost, inefficiencies, while increasing value and driving lean transformation in assigned production areas by leading/participating in continuous improvement (CI) activities (Kaizen events, use of Six Sigma tools, Lean Material Flow, etc.) Key Responsibilites: Identify and execute cost-out projects through productivity improvements Promote a culture of continuous improvement by applying lean manufacturing techniques to eliminate waste and deliver products to customers' expectations Develop and maintain robust, cost-efficient manufacturing processes Integrate equipment and systems using Industry 4.0, including implementing Automation Lead and support execution of capital projects as defined by plant leadership Use ELSS tools and CI strategies to improve performance on assigned production lines Lead formulation of manufacturing documentation, standard work sheets, control plans, and production area layouts Conduct time studies to establish or verify labor standards Qualifications: Required (Basic) Qualifications: Bachelor's degree in Engineering from an accredited institution No relocation benefit is being offered for this position. Only candidates within a 50-mile radius of the specified job location(s) will be considered. Active Duty Military Service member candidates are exempt from the geographical area limitation. Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc Preferred Qualifications: Minimum of 1 year of engineering experience in a manufacturing environment or equivalent engineering experience from co-op/internships Experience using CAD software (i.e., AutoCAD, Inventor, Solids Works, Creo, etc.) Experience with robotics or automation Industry 4.0 digitalization experience Project management experience Skills: Excellent analytical, problem-solving, interpersonal, and facilitation skills Strong communication and presentation skills Understanding and use of lean tools Familiarity with problem-solving methodologies (e.g., 8D, 5 Why, and A3) used to identify root causes and implement corrective and preventive actions Ability to travel approximately 10% We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at 1-800-###-#### to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Precision Engagement Systems Team is currently looking for a Panel/ Array ProcessManufacturing Engineer (Experienced or Senior) to join the team based in Sylmar, CA. Boeing is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world. As a small wholly owned subsidiary of The Boeing Company, Spectrolab offers the daily variety of work, direct interaction with manufacturing, customers, and suppliers, and family feel of a small company, while offering the benefits and stability of a recognized global industrial champion. As a member of our Manufacturing/Process Engineering team, you will have the opportunity to work on projects covering the entire range of Spectrolab's products: everything from large and small solar cell assemblies, panels and arrays for a variety of space applications using the world's highest efficiency solar cells to airborne searchlight/gimbal systems and ground-based high-intensity illuminated test systems. You will also have the opportunity to directly contribute to development programs and to help shape our next-generation improvements in product, process and tooling design. Position Responsibilities: Develops and implements production processes and generates/maintains process documentation to ensure correct and consistent process application in production Analyzes design/build concepts to evaluate producible design/build definitions Participates in gated process/product reviews and presents PFMECA and process/training readiness information to both internal and external customers Leads and implements manufacturing plans and assists in developing and maintaining manufacturing training requirements Supports definition of required tooling methodologies to ensure consistent process application Conducts producibility and variation analyses to ensure that manufacturing process capability matches requirements Assists in providing producibility information for inclusion in project plans and helps document producibility best practices Identifies leading edge technologies, materials or process improvements and targeted automation to improve ergonomics, safety, cost, and schedule Develops and monitors SPC and process paretos to identify and correct process drift and identify and implement continuous improvements to product and process Resolves technical problems of significant impact to performance, cost or schedule This position is expected to be 100% onsite. The selected candidate will be required to work onsite at the listed location. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee. Basic Qualifications (Required Skills/Experience): Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science 3+ years of experience in manufacturing or production engineering role 1+ years of experience in assembly or mechanical work Preferred Qualifications (Desired Skills/Experience): 5+ years related work experience or an equivalent combination of education and experience General Array Integration and Test operations support Maintaining production procedure and documentation Experience Leading or participating in LEAN events (AIW, 3P etc.) Experience with Factory Automation business capabilities such as machine tool integration and/or fabrication Experience leading RCCA investigations Experience with Database design/development (SQL preferred) Experience as process trainer (maintain training record) Familiarity with AS9100, NASA, AIAA, and other Aerospace standards Experience in hands on troubleshooting & resolving of process and/or test and/or software issues Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Shift Work Statement: This position is for 1st shift. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range for Experienced: $105,400 - $142,600 Summary pay range for Senior: $129,200 - $174,800 Applications for this position will be accepted until Feb. 01, 2026 Education Bachelor's Degree or Equivalent Required Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Eaton's Electrical division is currently seeking a Senior Manufacturing Engineer to join our team in Youngsville, NC. As the Senior Manufacturing Engineering you will be part of the YPO manufacturing engineering team, responsible for implementing Lean Manufacturing concepts, including Value Stream Map evaluation of current state production opportunities and the implementation of future state throughout all areas of operations. The expected annual salary range for this role is $83,000 - $122,000 a year. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: Implement Lean Manufacturing concepts, including Value Stream Map evaluation of current state production opportunities and the implementation of future state throughout all areas of operations Deploy Lean Tools as appropriate Evaluate current and future state manufacturing processes and ensures that sound engineering and manufacturing principles are being followed Prioritize safety and repeatability of existing processes, addressing identified concerns Recommends changes to existing manufacturing processes to improve manufacturing productivity and improve lean flow of materials Document manufacturing processes with work instructions Generate and implement Engineering Change Notices enhancing product quality and reducing product cost Initiate, develop and manage capital improvement projects including manufacturing equipment, facility enhancements and new product start-ups Drive continuous improvement on the shop floor, including opportunities to improve Quality, Productivity, and cost reduction Manage and complete multiple projects on schedule with minimal supervision. Support multiple product lines and a wide variety of assembly processes Fosters an environment that promotes Eaton's goals, philosophies, and encourages continuous improvement through participation and teamwork Drive NPI activities in assigned work cells (layouts, materials, costing) Perform all other duties as assigned. Basic (Required) Qualifications: Bachelor's Degree in Engineering from an accredited educational institution Three (3) years experience in engineering or manufacturing engineering No relocation benefit is being offered for this position. Only candidates within a 50-mile radius of Youngsville, NC. Active Duty Military Service member candidates are exempt from the geographical area limitation Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc Preferred Qualifications: Engineering Degree in Electrical, Industrial, or Manufacturing Engineering from an accredited educational institution Position Success Criteria: Experience with MRP systems (SAP) AutoCAD system experience Proficiency with Microsoft Office Applications Experience with Microsoft Project Knowledge of a wide variety of manufacturing processes including assembly and pull systems. Technical understanding and experience with Lean Manufacturing Systems and Six Sigma methodology. Ability to think strategically and see big picture in dynamic business environment Ability to work independently and in a team environment; to communicate articulately and professionally across many organizational levels and functions Highly motivated, works with a sense of urgency, driven to add value and deliver results #LI-LR1 We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at 1-800-###-#### to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's Electrical division is currently seeking a Senior Manufacturing Engineer to join our team in Raleigh, NC. Relocation assistance within the US is available. Responsibilities will include implementing Lean Manufacturing concepts, including Value Stream Map evaluation of current state production opportunities and the implementation of future state throughout all areas of operations. The expected annual salary range for this role is $83,250 - $122,100 a year. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: Deploy Lean Tools as appropriate Evaluate current and future state manufacturing processes and ensures that sound engineering and manufacturing principles are being followed Prioritize safety and repeatability of existing processes, addressing identified concerns Recommends changes to existing manufacturing processes to improve manufacturing productivity and improve lean flow of materials Document manufacturing processes with work instructions Generate and implement Engineering Change Notices enhancing product quality and reducing product cost Initiate, develop and manage capital improvement projects including manufacturing equipment, facility enhancements and new product start-ups Drive continuous improvement on the shop floor, including opportunities to improve Quality, Productivity, and cost reduction Manage and complete multiple projects on schedule with minimal supervision Support multiple product lines and a wide variety of assembly processes Fosters an environment that promotes Eaton's goals, philosophies, and encourages continuous improvement through participation and teamwork Drive NPI activities in assigned work cells (layouts, materials, costing) Support distribution centers, warehousing, repair and logistics between multiple sites with minimal supervision Basic (Required) Qualifications: Bachelor's Degree in Engineering from an accredited educational institution Minimum of three (3) years experience in engineering or manufacturing engineering Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc Preferred Qualifications: Engineering Degree in Electrical, Industrial, or Manufacturing Engineering from an accredited educational institution Experience with MRP systems (SAP) Experience with Microsoft Project Lean/Six Sigma/CI Certifications Electrical Industry Experience AutoCAD system experience Position Success Criteria: Knowledge of a wide variety of manufacturing processes including assembly and pull systems. Technical understanding and experience with Lean Manufacturing Systems and Six Sigma methodology. Proficiency with Microsoft Office Applications #LI-LR1 We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at 1-800-###-#### to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

We're looking for people who put their innovation to work to advance our success - and their own. Join an organization that ensures a more secure world through connecting and protecting our customers with inventive electrical solutions. Collaborate with manufacturing and maintenance in key projects and act as a change agent where necessary. Plan and perform a variety of duties involved in design, development, and continuous improvement of production machinery, equipment and facilities. Advise and assist maintenance personnel in troubleshooting equipment problems and machine repairs. Develop and implement plans for cost reduction and plant efficiency improvements. Support the operations team's daily production of high quality ground rods by providing technical information, documentation, guidance and through participating as a cross-functional team member to help resolve issues relating to manufacturing. Support the operations team's success of the day-to-day production activities including: maintenance, equipment troubleshooting, cost routing, quality plans, etc. Lead Lean improvements for manufacturing cells for areas of responsibility across 5 key categories: Safety, Quality, Delivery, Cost and Cash (SQDCC). Engage in creative problem solving to address operational issues including: ergonomic/ safety, efficiency improvements, process bottlenecks, quality concerns. Manage and support key business systems to ensure smooth operations and accurate reporting. YOU HAVE: Bachelor's Degree in Industrial Engineering, Mechanical Engineering or related field is required. 3+ years of manufacturing work experience. Experience in process improvement (Lean, Six Sigma) concepts and methods along with the flexibility and adaptability to accept, support, and deploy new processes in a changing business environment. AutoCAD, SolidWorks and Excel program experience preferred. Excellent communication skills, both written and spoken. Adapting to rapidly changing business circumstances; must be able to thrive in a constantly changing business environment. Planning, organizing and prioritizing time/workload in order to accomplish tasks and meet deadlines. Demonstrated skills in attention to detail in composing, typing, and proofing materials. Excellent problem-solving ability. Ability to build and maintain effective working relationships, both internal and external, and establish credibility with business partners. WE HAVE: A dynamic global reach with diverse operations around the world that will stretch your abilities, provide plentiful career opportunities, and allow you to make an impact every day nVent is a leading global provider of electrical connection and protection solutions. We believe our inventive electrical solutions enable safer systems and ensure a more secure world. We design, manufacture, market, install and service high performance products and solutions that connect and protect some of the world's most sensitive equipment, buildings and critical processes. We offer a comprehensive range of systems protection and electrical connections solutions across industry-leading brands that are recognized globally for quality, reliability and innovation. Our principal office is in London and our management office in the United States is in Minneapolis. Our robust portfolio of leading electrical product brands dates back more than 100 years and includes nVent CADDY, ERICO, HOFFMAN, ILSCO, SCHROFF and TRACHTE. Learn more at ************** Commitment to strengthen communities where our employees live and work We encourage and support the philanthropic activities of our employees worldwide Through our nVent in Action matching program, we provide funds to nonprofit and educational organizations where our employees volunteer or donate money Core values that shape our culture and drive us to deliver the best for our employees and our customers. We're known for being: Innovative & adaptable Dedicated to absolute integrity Focused on the customer first Respectful and team oriented Optimistic and energizing Accountable for performance Benefits to support the lives of our employees Benefit Overview At nVent, we value our people and their health and well-being. We provide a broad benefits package with meaningful programs for eligible full-time employees that includes: Medical, dental, and vision plans along with flexible spending accounts, short-term and long-term disability benefits, critical illness, accident insurance and life insurance. A 401(k) retirement plan and an employee stock purchase plan - both include a company match. Other supplemental benefits such as tuition reimbursement, caregiver, personal and parental leave, back-up care services, paid time off including volunteer time, a well-being program, and legal & identity theft protection. At nVent, we connect and protect our customers with inventive electrical solutions. People are our most valuable asset. Inclusion and diversity means that we celebrate and encourage each other's authenticity because we understand that uniqueness sparks growth. #LI-AW1 #LI-Onsite

We're looking for people who put their innovation to work to advance our success - and their own. Join an organization that ensures a more secure world through connecting and protecting our customers with inventive electrical solutions. Plan and perform a variety of duties involved in design, development, and continuous improvement of production machinery, equipment and facilities. Advise and assist maintenance personnel in solving equipment problems and machine repairs and support the completion of equipment and facility enhancements to promote safety, quality, and cost/service improvements. Develop and implement plans for cost reduction and plant efficiency improvements. Work with operators, team leaders, value stream managers, and planners to optimize process center layouts and designs incorporating material flow and line balancing. Use lean tools, communication skills and leadership abilities, lead and facilitate kaizen activities encouraging multi-functional groups to participate, and meet common goals. Lead and support capital expenditure requests and implementations using basic cost justification and business management principles. Engineering Change Order (ECO) processing - authorization of product and documentation changes. YOU HAVE: Bachelor's degree in Mechanical, Electrical, Industrial, or Manufacturing Engineering is required. Candidates with at least 1 year of background in a manufacturing setting within engineering are preferred. Basic knowledge, classroom and/or project experience in PLC, Electronics, Hydraulics, Welding methods, and Robotics. Experience in implementing and leading Lean Manufacturing and Continuous Improvement projects preferred Experience using DMAIC/PDCA concepts in a project environment preferred Experience in a Lean manufacturing environment is a plus. Preferred experience: robotics and automation, progressive dies and stamping, PLC and controls, Six Sigma Greenbelt or statistical analysis. WE HAVE: A dynamic global reach with diverse operations around the world that will stretch your abilities, provide plentiful career opportunities, and allow you to make an impact every day nVent is a leading global provider of electrical connection and protection solutions. We believe our inventive electrical solutions enable safer systems and ensure a more secure world. We design, manufacture, market, install and service high performance products and solutions that connect and protect some of the world's most sensitive equipment, buildings and critical processes. We offer a comprehensive range of systems protection and electrical connections solutions across industry-leading brands that are recognized globally for quality, reliability and innovation. Our principal office is in London and our management office in the United States is in Minneapolis. Our robust portfolio of leading electrical product brands dates back more than 100 years and includes nVent CADDY, ERICO, HOFFMAN, ILSCO, SCHROFF and TRACHTE. Learn more at ************** Commitment to strengthen communities where our employees live and work We encourage and support the philanthropic activities of our employees worldwide Through our nVent in Action matching program, we provide funds to nonprofit and educational organizations where our employees volunteer or donate money Core values that shape our culture and drive us to deliver the best for our employees and our customers. We're known for being: Innovative & adaptable Dedicated to absolute integrity Focused on the customer first Respectful and team oriented Optimistic and energizing Accountable for performance Benefits to support the lives of our employees Benefit Overview At nVent, we value our people and their health and well-being. We provide a broad benefits package with meaningful programs for eligible full-time employees that includes: Medical, dental, and vision plans along with flexible spending accounts, short-term and long-term disability benefits, critical illness, accident insurance and life insurance. A 401(k) retirement plan and an employee stock purchase plan - both include a company match. Other supplemental benefits such as tuition reimbursement, caregiver, personal and parental leave, back-up care services, paid time off including volunteer time, a well-being program, and legal & identity theft protection. At nVent, we connect and protect our customers with inventive electrical solutions. People are our most valuable asset. Inclusion and diversity means that we celebrate and encourage each other's authenticity because we understand that uniqueness sparks growth. #LI-JT1 #LI-Onsite #INDOTH

At SMF (an Etnyre International Company), we don't just manufacture top-quality components - we build careers. For over 50 years, we've delivered excellence as a Tier One supplier to Fortune 500 OEMs in industries like construction, power generation, agriculture, and mining. We're proud to rank in the top 0.5% of machine shops nationwide, and that success starts with our people. Why You'll Love This Role As a Senior Manufacturing Engineer, you'll play a critical role in shaping the future of our manufacturing operations. This position is ideal for someone who thrives on problem-solving, continuous improvement, and driving efficiency across processes. You'll have the opportunity to influence production methods, optimize workflows, and ensure quality standards that exceed customer expectations. What You'll Do Lead process analysis and identify opportunities for improvement in production methods, equipment layout, material handling, and workforce utilization. Drive continuous improvement initiatives to reduce waste, improve efficiency, and enhance profitability. Develop and maintain accurate data for manufacturing systems, including routings, work standards, lead times, and capacity planning. Review and implement quality requirements to ensure compliance with customer contracts and company standards. Collaborate across departments to align manufacturing practices with quality and operational goals. Create CNC programs for various machines using both manual and software-based methods. Present recommendations for capital investments, tooling, and process enhancements. Support new product launches and ensure readiness for production. Pay & Perks SMF rewards your hard work and dedication with an industry-leading Total Rewards Package: Annual Bonus Program for ALL Members Competitive Pay Based on Experience Generous Paid Time Off Package (Vacation + Flex Time) 11 Paid Holidays + 3 Paid Holiday Break Days Comprehensive Benefits: Low-cost HSA & PPO Medical Plans Low-Cost Dental & Vision Coverage Accident, Hospital, & Critical Illness Insurance Options Company-Paid Life Insurance, Short- & Long-Term Disability 401(k) with Company Match + Annual Profit Sharing What We're Looking For Education: Bachelor's degree in Industrial Management, Industrial/Manufacturing Engineering, or Mechanical Engineering. Experience: Minimum of 10 years in industrial/manufacturing environments with related responsibilities. Strong knowledge of lean manufacturing principles, process optimization, and quality systems. Excellent analytical, problem-solving, and communication skills. Ability to work collaboratively and lead initiatives that drive measurable results Physical Requirements Occasional bending and twisting. Ability to lift 10-20 lbs (and periodically heavier loads).

Supervisory Responsibilities: None Purpose: As assigned, analyze and evaluate manufacturing methods and/or work standards, tooling, equipment and machinery. Recommend and implement technical actions necessary to support production activities. Essential Duties/Responsibilities: • Ensure a safe work environment for self and others. Follows all safety rules and regulations. Demonstrate commitment to safety program. • Coordinate capability studies on new and current processes and equipment, FMEA studies and identification of Critical Characteristics. • Responsible for generating CNC tool path programs, and station layouts. Take an active role in optimizing programs (speeds, feeds, and chip control). • Responsible for filing, cataloging, and transferring CNC programs. • Initiate Engineering Change Request as required. • Estimate the cost to manufacture new and proposed products • Responsible for the placement/installation of new equipment and processes • Evaluate required tooling and recommend design, type, or quantity changes as necessary. • Evaluate existing equipment, machinery, and material handling systems; recommend alterations or alternatives as required. • Participate in analyzing, setting, and revision of machine center, work center, and/or equipment work standards. • Prepare tool or area layout drawings as required and get required approvals/signatures of same. • Assume an active role on the TEAM Andrews Improvement Teams • Assist with coaching responsibilities as needed • Responsible for producing and maintaining process documentation including tool list, setup instructions, and operation sketches. • Must meet educational objectives as outlined in career path • Will be required to perform other duties as requested, directed or assigned. Minimum Requirements: Education & Experience: • Bachelor's degree (B. A.) from four-year college or university; or one to two years related experience and/or training; or equivalent combination of education and experience. Job Knowledge, Skills and Abilities: • Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. • Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Training: • Reference OJT Physical Demands • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions • While performing the duties of this job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee must occasionally lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. • While performing the duties of this job, the employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to risk of electrical shock and vibration. The noise level in the work environment is usually quiet. • As part of this job the employee may be asked to handle hazardous material. Contact with hazardous material may include, but not limited to handling, moving, directing others or the actual clean up. As part of this responsibility the employee will have had the required training in the handling of hazardous material. • Quality of work and cleanliness of work station must conform to TEAM Industries - Andrews standards. Employee must be able to function within a teamwork oriented environment and interact favorably with fellow employees. The normal work day (nine hours) will include one half hour for lunch and two ten minutes breaks. See Functional for complete demands Requirements Minimum Requirements: Education & Experience: • Bachelor's degree (B. A.) from four-year college or university; or one to two years related experience and/or training; or equivalent combination of education and experience. Job Knowledge, Skills and Abilities: • Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. • Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Training: • Reference OJT Physical Demands • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions • While performing the duties of this job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee must occasionally lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. • While performing the duties of this job, the employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to risk of electrical shock and vibration. The noise level in the work environment is usually quiet. • As part of this job the employee may be asked to handle hazardous material. Contact with hazardous material may include, but not limited to handling, moving, directing others or the actual clean up. As part of this responsibility the employee will have had the required training in the handling of hazardous material. • Quality of work and cleanliness of work station must conform to TEAM Industries - Andrews standards. Employee must be able to function within a teamwork oriented environment and interact favorably with fellow employees. The normal work day (nine hours) will include one half hour for lunch and two ten minutes breaks. See Functional Job Description for complete demands

At Aurora Flight Sciences, we design, build, and fly advanced aircraft and enabling technologies from concept to reality. We are searching for a talented and self-motivated Quality Program Manager to help us create the future of flight. Responsibilities will include but not be limited to the following: Responsibilities The role of the Quality Program Manager (QPM) is to act as the primary point of contact (POC) for all customer/program specific quality management activities within the assigned program office. The QPM proactively manages actions required to ensure 100% Quality while maintaining 100% on-time delivery performance on behalf of the program. Minimum Requirements * Education/experience typically acquired through advanced education (e.g. Bachelor) and typically 6 or more years' related work experience or an equivalent combination of education and experience (e.g. Master+4 years' related work experience, 10 years' related work experience, etc.). * Knowledge and experience in AS9100 QMS environment. * Composite and/or metallic aircraft manufacturing and assembly experience. * Proficient with MS Office suite. * Must be a US Person. Preferred Requirements * 10+ years in program management role in Quality and/or Quality Engineering. * Minitab or equivalent statistical data analysis experience ASQ certifications in Quality Management, Quality Engineering, Continuous Improvement, or Auditing. * Experience with FAA conformity processes and documents (e.g., 8130). Physical Requirements * Ability to work in a manufacturing environment and wear proper PPE. * Ability to transport objects up to 35 pounds as well as consistently stoop, crawl, bend, crouch, climb and kneel. * Must be able to work alternate shifts and/or extended hours if required. * Work onsite in Columbus, MS. Salary Range (Annualized USD) * Minimum Range: $73,000.00 to $130,000.00 * Maximum Range: $90,000.00 to $160,000.00

Waymo is an autonomous driving technology company with the mission to be the world's most trusted driver. Since its start as the Google Self-Driving Car Project in 2009, Waymo has focused on building the Waymo Driver-The World's Most Experienced Driver-to improve access to mobility while saving thousands of lives now lost to traffic crashes. The Waymo Driver powers Waymo's fully autonomous ride-hail service and can also be applied to a range of vehicle platforms and product use cases. The Waymo Driver has provided over ten million rider-only trips, enabled by its experience autonomously driving over 100 million miles on public roads and tens of billions in simulation across 15+ U.S. states. The Software Quality Operations (SWQOps) team is at the heart of ensuring the safety, reliability, and quality of the Waymo Driver. Our mission is to build an adaptable and scalable operation, increasingly powered by AI, to deliver the crucial insights necessary to confidently deploy and grow Waymo's autonomous vehicle service. Why This Team is Essential to Waymo's Success: Waymo is undergoing unprecedented growth, rapidly expanding into new cities (targeting ~20 new cities by EOY 2026) and launching new vehicle platforms. SWQ Ops plays a critical role in this expansion, making it possible to scale safely and efficiently. The Scenario Operations team within SWQ Ops owns the scaled delivery and maintenance of simulation-based directed testing coverage used to evaluate the Safety and performance of the driver as Waymo continues to scale. In this role on Scenario Operations… You will: * Design Scalable Quality Architecture: Move the organization towards scalable QC (Quality Control) methodologies for test creation (e.g., statistical sampling, quality audits, and automated validation). Be the primary architect of how we verify work at increased scale * Manage meta-quality assurance: Manage our meta-quality framework to drive overall test quality assurance. Review dashboards and trends to identify opportunities to improve first-time accuracy and reduce "rework" rates. * Own the Maintenance Engine: Take ownership of the Maintenance Fulfillment funnel for test repairs. You will be responsible for the end-to-end velocity of resolving test-health issues identified by our Quality and Engineering teams. * Match capacity with demand: Develop tiered standards and certification frameworks that enable our vendor workforce to perform a diverse range of quality fixes at different experience levels. * Partner on Tooling development: Support the development of automation and AI-assisted tools that can decrease "Time-to-Resolution" for maintenance tasks identified by stakeholders. You have: * Bachelor's degree in technical or business discipline * 7+ years of experience in Technical Operations, Program Management, or Quality Engineering * Proficiency in SQL and data visualization and using it to identify root causes of operational bottlenecks * Ability to translate operational constraints into technical requirements and experience working across technical partners (Product, Engineering, Data Science, Systems Engineering) to drive outcomes * Ability to thrive in a high ambiguity, dynamic environment We prefer: * Undergraduate in technical degree * Experience working with vendor workforces * Experience with Lean / Six Sigma process improvement methodologies * Familiarity with AQL (Acceptable Quality Limit) sampling or other statistical process control methodologies. * Experience within A / V space and simulation-based test environments The expected base salary range for this full-time position across US locations is listed below. Actual starting pay will be based on job-related factors, including exact work location, experience, relevant training and education, and skill level. Your recruiter can share more about the specific salary range for the role location or, if the role can be performed remote, the specific salary range for your preferred location, during the hiring process. Waymo employees are also eligible to participate in Waymo's discretionary annual bonus program, equity incentive plan, and generous Company benefits program, subject to eligibility requirements. Salary Range $152,000-$192,000 USD We appreciate your interest in Waymo. Waymo is proud to be an equal opportunity employer, committed to creating a culture of belonging and maintaining a supportive workplace for all employees. We welcome applicants of all backgrounds, and employment decisions are based on a candidate's qualifications, experience, and alignment with job requirements and business needs. Waymo does not discriminate against, and prohibits harassment of, any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, military status, family status, pregnancy, genetic information or any other basis protected by applicable law. Waymo will also consider for employment qualified applicants with criminal records in accordance with applicable law. Waymo is committed to making sure our hiring process is accessible for all candidates. If you need assistance applying for a role or participating in the interview process due to a disability, please let the recruiting team know or email *********************************. (This email address is intended to be used only for requesting accommodations as part of the application process. Other inquiries will not receive a response.)

Process Industrial Engineer (Process IE) Department: Industrial Engineering Reports To: IE Manager Location: Wistron InfoComm - WUS Facility The Process IE is responsible for developing, improving, and maintaining production processes to ensure efficiency, quality, and compliance. This role focuses on creating standard operating procedures (SOPs), conducting time studies, supporting automation initiatives, and providing training to production teams. The Process IE also plays a key role in customer audits and resolving IE-related issues. Key Responsibilities: Write and maintain Standard Operating Procedures (SOPs) for PCBA and FA. Analyze and improve production processes to enhance efficiency and reduce costs. Conduct training sessions for operators and supervisors on updated processes and SOPs. Perform time and motion studies to establish standard times for operations. Assist in implementing automation solutions to improve production efficiency. Participate in customer audits and respond to IE-related inquiries and corrective actions. Key Performance Indicators (KPIs): SOP Accuracy & Timeliness: 100% of SOPs updated and approved before production changes. Process Efficiency: Achieve 3-5% improvement in cycle time per quarter. Training Completion: Ensure 100% of production staff trained on new SOPs within 2 weeks of release. Standard Time Accuracy: Maintain ±5% variance in time standards during audits. Automation Projects: Support at least 2 automation initiatives per year. Audit Compliance: Zero major findings related to IE processes during customer audits. Plan and track layout setup based on product requirements. Coordinate and monitor progress for new plant construction and build-up activities. Capacity Management: Lead internal and customer capacity meetings. Prepare and deliver internal/customer capacity assessment reports. Upload D1 product model information into customer systems (e.g., Anaplan). Project Execution: Implement AI Digital Transformation projects to enhance operational efficiency. Support parallel implementation of overseas projects, ensuring consistency and compliance with global standards. Key Performance Indicators (KPIs): Layout Completion: 100% of layout changes completed on time and aligned with product launch schedules. Capacity Accuracy: Maintain 98% accuracy in capacity reports and forecasts. Customer System Updates: Upload D1 product model data within 24 hours of request. Project Delivery: Complete AI digital transformation milestones on time and within budget. Global Alignment: Zero major deviations in overseas project implementation compared to corporate standards. Audit Compliance: No findings related to layout or capacity planning during customer audits. Qualifications Qualifications: Education: Graduated from university or above, major in Industrial Engineering. Work Experience: 2-5 years in process engineering or industrial engineering. Skills: AutoCAD Time and motion study Lean production concepts Other digital tools (MES, ERP, BI dashboards) are a plus Strong communication and training skills About Wistron InfoComm: Wistron InfoComm is a global leader in electronics manufacturing services, partnering with world-class technology brands to deliver high-quality, efficient, and sustainable manufacturing solutions. Our Fort Worth WUS facility supports advanced engineering, production operations, and continuous improvement initiatives across North America. Equal Employment Opportunity (EEO) Statement: Wistron InfoComm is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, disability, or veteran status. Benefits: Competitive salary and performance-based bonuses Health, dental, and vision insurance Retirement savings plan (401k or equivalent) Paid time off (vacation, sick leave, holidays) Professional development and training programs Employee wellness initiatives Working Conditions: Standard office environment with frequent visits to production lines Ability to work extended hours during critical production phases Occasional travel for audits or training support