Field Technician Engineer jobs at Dycom Industries

We Don't Cheat at Solitaire! If you're looking for a company that values doing the right thing and putting people & safety first, this may be the company for you! Satellite Shelters, Inc., a leader in the mobile modular industry, has a great opportunity for a Yard Technician to join our team in our Orlando, FL, branch ( This branch is due to move to a new location in Apopka in early 2026) . The right person is a highly organized and safety-oriented individual who is a problem-solver and a HIGHLY effective communicator. Experience in the construction or mobile office industries is preferred. Position Summary: This position is responsible for the construction and repair of units in compliance with Satellite Shelter's policies and procedures and according to specifications aligned by Operations Manager. Essential Duties and Responsibilities: Yard organization and cleanliness Mobile office material inventory management Organize, maintain, load & unload furniture (Satellite Specialty Products) Remove and replace lighting, plumbing and electrical Perform moderate carpentry work/repair. Interface with customers at job sites Perform other duties as assigned. Supervisory Responsibilities: No formal supervisory role. Required Skills: Must be a Self-Starter; has the ability to work independently & take initiative Problem-solver Forklift experience Utility trailer experience Entry level to intermediate level construction experience required Moderate carpentry and electrical experience. Organized HVAC experience preferred but not required. Physical/Mental Demands: Wears personal protective equipment as required Demonstrated ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion and grip strength Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to operate hand and power tools Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Compensation: The pay range listed is the base pay range that Satellite Shelters, inc/Satellite Industries, Inc. reasonably expects to pay someone for this position (compensation may vary outside of this range depending on several factors, including but not limited to, a candidate's qualifications, skills, competencies, experience, location and end client requirements). Benefits and Ancillaries: Medical, dental, vision, PTO benefits and ancillaries may be available for eligible employees and vary based on the plan options selected by the employee. PM25

Permit Coordinator - St. Cloud, Florida A WORLD LEADER IN TESTING, INSPECTION & CERTIFICATION SERVICES Bureau Veritas offers dynamic, exciting employment opportunities with an attractive salary/benefit package and an opportunity to play a vital role with a global organization. If you would enjoy working in a dynamic environment and are looking for an opportunity to become part of a stellar team of professionals, we invite you to apply online today. Bureau Veritas is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, citizen status, sexual orientation, genetics, status as a protected veteran, or any other non-job-related characteristics. The Permit Coordinator is responsible for inspection scheduling, inspection reporting, and plan review processing, while completing organizational and administrative tasks to support the department's daily operations. Strong attention to detail and organizational abilities are needed to successfully sort and keep track of various time-sensitive tasks. The Permit Coordinator must be able to apply problem-solving and critical thinking skills for problem resolution when conflicts arise. Essential Duties and Responsibilities include the following. Other duties may be assigned. Process inspection requests and schedule inspections following company established procedures. Provides support for administrative functions in the assigned department. Answers incoming calls; processes mail, faxes, copying, FedEx shipments, etc. Manages the workload to ensure all tasks are completed within the established timeframes. Process final packets for Certificates of Occupancy or Completion. Assists clients to meet construction goals and timeframes. Identify and report conflicts or issues with scheduling and/or company databases. Communicates scheduling changes with staff and clients. Performs data entry and maintenance of company databases, directories and records. Performs a variety of essential record keeping duties, and maintains department record keeping and filing systems Process plans for review, acting as liaison between staff and client Assists with any other duty that is required to ensure inspections are scheduled and reported accurately. Performs other related duties, as directed. NOTE: Management retains the discretion to add to or change the duties of the position at any time. Experience: High school graduate with, at least, 3 years of office experience General knowledge of the Construction Industry Proficient with Microsoft Office programs Excellent communication skills with high level of English proficiency, both written and verbal, with an exhibited high level of professionalism. Extreme attention to detail, organizational and time management skills Skills: Knowledge of general office equipment- copier/fax/scanner, phone Problem-solving abilities Excellent customer service skills Must be able to understand and follow instructions Ability to work well with others in a collaborative team environment High energy level and able to work in a fast paced environment Computer Skills: Demonstrated knowledge of a variety of computer software applications in word processing, spreadsheets, document and database software (Outlook, Word, Excel, Adobe Acrobat). Work Environment: An employee in this position typically works in an office environment with controlled climate. Outside office travel is limited. Physical Demands: While performing the duties of this Job, the employee is regularly required to sit and work with computer systems for extended periods of time. The employee is occasionally required to lift up to 20 pounds. The vision requirements include: ability to adjust focus, distance vision and close vision.

**Any Employment Offers are Contingent Upon Successful Completion of the Following:** + Verification of Work Authorization and Employment Eligibility + Substance Abuse Screening + Physical Exam (if applicable) + Background Checks for Badging/Security Clearances (if applicable) **About Hensel Phelps:** Founded in 1937, Hensel Phelps specializes in building development, construction and facility services in markets ranging from aviation to government, commercial, transportation, critical facilities, healthcare and transportation. Ranked #1 in aviation and #6 overall general contractor in 2024 by BD+C, Hensel Phelps is one of the largest employee-owned general contractors in the country. Driven to deliver EXCELLENCE in all we do and supported by our core values of Ownership, Integrity, Builder, Diversity and Community, Hensel Phelps brings our clients' visions to life with a comprehensive approach that begins with innovative planning and extends throughout the life of the property. **Position Description:** The Field Engineer (FE) works directly for the Superintendent and is expected to exercise judgment and discretion in making recommendations, implementing policies and procedures and handling a wide variety of matters in the field. The position is normally, but not necessarily preparatory to becoming an Office Engineer or Project Engineer. The primary purpose of the position is to proactively aid the Superintendent in front-line field management. In addition, the position requires a considerable amount of work, responsibility, persistence, problem solving ability and good attitude, because the FE is responsible for the majority of the layout on a project, supervision of trade workers and subcontractor employees, as well as lift drawings, safety, and quality control responsibilities. Although the majority of a Field Engineer's time will be spent in the field, there are some duties which will require work in the field office. This is a safety sensitive position. **Position Qualifications:** + A 4 -year degree in Civil, Structural, Architecture or Construction Management. + Valid Driver's License. + Strong communication skills. + Computer software - Microsoft Office Suite, specifically Excel-based templates, ProjectSight, Primavera and AutoDesk Suite. **Preferred Qualifications:** + Past internships in the construction industry are preferred, but not required. **Essential Duties:** + Project layout (surveying) in conformance with design and contract documents. + Check concrete forms for accuracy and adequacy of construction, including all embedded items, before placement of concrete. + Perform production trend analysis for quantities of work in place and report for the weekly and monthly schedule and cost control reports. + Assist with quality control, site safety initiatives and coordination of trade partners as delegated by the project superintendent. May include directing a small work force to gain supervisory experience. + Coordinate material deliveries by checking material requirements in advance and comparing with the delivery status. Additionally, inspect materials delivered to the job for quantity, quality and condition, and report on missing and/or damaged items. + Assist foremen and trade partners with interpretation of plans and specifications. + Oversight of trade partners, as assigned, and direction of workforces (e.g., a labor crew) of employees or trade partner employees to gain supervisory experience. + Participate in jobsite safety meetings, weekly safety audits, etc. + Collaborate with the VDC team on VDC scope of work, execution plan and deliverables related to field operations. Review and navigate within the current 3D model viewing and scheduling software. **Physical Work Classification & Demands:** Moderate Work. Exerting up to 50 pounds of force occasionally, and/or up to 25 pounds of force frequently, and/or 10 pounds of force constantly to move objects. + The individual in this position will periodically walk, kneel, sit, crouch, reach, stoop, read/see, speak, push, pull, lift, stand, and finger/type. The frequency of each action varies by workflow and office activity. + Walking - The person in this position needs to occasionally move about inside the office to access file cabinets, office machinery, boxes, cabinets, etc. + Constantly operates a computer and other office machinery, such as a calculator, copy machine, phone, computer, and computer printer. + The person in this position frequently communicates with employees and external stakeholders regarding a variety of topics related to office administration. + Constantly computes, analyzes, and conceptualizes mathematical calculations and formulas. + The person in this position regularly sits in a stationary position in front of a computer screen. + Constantly reads written communications and views mail submissions. Will also need to read blueprints and take/verify field measurements. + Climbing - Ascending or descending ladders, stairs, scaffolding and ramps at various heights. + Balancing - Ability to maintain body equilibrium to prevent falling and to walk, stand or crouch. + Stooping - Bending the body downward and forward by the spine at the waist. + Visual acuity and ability to operate a vehicle as certified and appropriate. + Occasionally exposed to high and low temperatures + Frequently exposed to noisy environments and outdoor elements such as precipitation and wind. **Benefits:** Hensel Phelps provides generous benefits for our salaried employees. This position is eligible for company paid medical insurance, life insurance, accidental death & dismemberment, long-term disability, 401(K) retirement plan, health savings account (HSA) (HSA not available in Hawaii), and our employee assistance program (EAP). It also is eligible for employee paid enrollment in vision and dental insurance. Hensel Phelps also believes in the importance of taking time to recharge. As a result, salaried employees are eligible for paid time off beginning upon hire. Salaried positions (project engineers and above) participate in an annual bonus plan, subject to company and employee performance. Salaried employees (this is all salaried employees) are also eligible for a company cell phone or cell phone allowance in accordance with company policy. Further, salaried employees (project engineers and above) also receive either a vehicle or vehicle allowance in accordance with Hensel Phelps' policies. Based on position location, a cost of living adjustment (COLA) may also be included (subject to periodic review and adjustment). **Equal Opportunity and Affirmative Action Employer:** Hensel Phelps is an equal opportunity employer. Hensel Phelps is committed to engaging in affirmative action to increase employment opportunities for protected veterans and individuals with disabilities. Hensel Phelps shall not discriminate against any employee or applicant for employment on the basis of race, color, religion, sex, age, national origin, sexual orientation, gender identity and expression, domestic partner status, pregnancy, disability, citizenship, genetic information, protected veteran status, or any other characteristic protected by federal, state, or local law. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

DPR Construction is seeking a Field Technology Engineer/Surveyor for our team in Tampa. Reporting to the Field Technology Lead and the SPW Business Unit Lead, the successful candidate will support the implementation of building control, laser scanning capture, drone flights, and post-processing efforts across the Central Florida Business Unit and the Southeast region. Responsibilities Support the overall Field Technology services across the Tampa business unit and designated projects Support existing conditions and as-built surveys for upcoming and current projects throughout the region. Support and/or perform initial surveying & field layout activities with robotic total stations to support field validation, quality control, and quality assurance. Perform construction building layout with robotic total stations to support field validation, quality control, and quality assurance. Plan and execute field survey activities in accordance with standards set by the project team. Plan and perform layout set out and back-check tasks. Leverage appropriate set up procedures using a robotic total station including known backsight and multi-point resections. Perform benchmark transfers using an auto level. Proficient with allocating and scheduling job duties to others. Ensure all equipment and materials are organized and equipment firmware is up to date. Support/Perform sUAS and 360 photo/video capture and post processing activities. Assist with reality capture services utilizing terrestrial laser scanning and sUAS/photogrammetry tools to capture, process, and document existing and as-built conditions of interior and exterior spaces. Support project teams and VDC engineers on the utilization and analysis of reality capture deliverables (point clouds, meshes, 360 photos, etc.). Basic Qualifications We are looking for a flexible, detail-oriented individual that will relish performing in a fast-paced, team-oriented environment, with ability to multi-task, produce quality deliverables, and meet project-based deadlines. The successful candidate will have: Ability to work in an environment that requires transparency, team collaboration, leading by influencing, and socialization of initiatives. Position requires lifting and carrying moderately heavy equipment (25lbs+), climbing ladders and occasionally scanning crawl spaces and enclosed ceilings. Flexible hours: Commercial building scans can start at 6AM and occasionally require weekend work. Minimum 1-3 years of hands-on construction experience in the AEC industry. Able to read and understand construction documents, shop drawings and plans. Comfortable viewing/interacting with 3D models. Knowledge in robotic total station and 2+ years of RTS usage, Leica Captivate experience is a plus. Knowledge in Autodesk Point Layout, AutoCAD and/or Civil 3D. Basic to Intermediate level software knowledge in Autodesk packages (e.g. Revit, Navisworks, BIM 360 etc.) DPR Construction is a forward-thinking, self-performing general contractor specializing in technically complex and sustainable projects for the advanced technology, life sciences, healthcare, higher education and commercial markets. Founded in 1990, DPR is a great story of entrepreneurial success as a private, employee-owned company that has grown into a multi-billion-dollar family of companies with offices around the world. Working at DPR, you'll have the chance to try new things, explore unique paths and shape your future. Here, we build opportunity together-by harnessing our talents, enabling curiosity and pursuing our collective ambition to make the best ideas happen. We are proud to be recognized as a great place to work by our talented teammates and leading news organizations like U.S. News and World Report, Forbes, Fast Company and Newsweek. Explore our open opportunities at ********************

Donley's is a fourth-generation, nationally recognized leader in concrete construction and restoration services. The firm is headquartered in Cleveland, Ohio with regional offices in Charleston, South Carolina, Raleigh, North Carolina and Richmond, Virginia. With annual revenues over $200 million, Donley's engages genuine people to provide concrete construction services that deliver and sustain its clients' vision. The organization's core values of people, safety, solutions and performance have remained the same since its founding in 1941. In 2023, Donley's transitioned to an Employee-Owned structure, making employees the owners of the business. Job Description Donley's is seeking an experienced Construction Layout Person to assist with projects located in the North Florida area (Tallahassee, Gainesville, Jacksonville markets) with 2-4+ years of experience as a Field Engineer. Responsibilities Surveying * Responsible for the installation of onsite layout * Interpret Contract Documents * Proficient with use of surveying Equipment to Provide accurate Layout * Timely Deliverance of Layout Information * Perform required As-builts for in-place concrete Position Requirements Formal Education & Certification * 2 or more semesters of college courses in surveying, civil engineering, or a related field preferred. * 1 or more semesters of co-op or internship experience in commercial construction preferred. Benefits * Medical Insurance * Dental and Vision Insurance * FSA or HSA * PTO * 401K with Company Match * ESOP * Short and Long Term Disability * Life Insurance We are an Equal Opportunity and E-Verify Employer. Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Phone: ************ Equal Opportunity Employer, including disabled and veterans. If you want to view the Know Your Rights: Workplace Discrimination is Illegal poster, please choose your language:

At Clancy & Theys, we don't just build projects - we build trust, teams, and communities, guided by our four core values: Safety, Stewardship, Passion, and Collaboration . We're looking for a motivated and detail-oriented Field Engineer to join our Orlando , FL office. This entry-level position supports our Superintendents and field leadership in the daily coordination of on-site operations. The ideal candidate is eager to learn, contribute, and grow into a future leader - The Clancy Way. Principal Duties and Responsibilities Assist the Superintendent and field supervisory team with day-to-day on-site operations and coordination. Represent Clancy & Theys on the jobsite, helping ensure construction methods, procedures, and safety standards are consistently followed. Monitor and maintain accurate project documentation, including daily logs, reports, and field records. Coordinate with internal project teams and external partners to support effective project execution and resolve issues as they arise. Assist with virtual design and construction (VDC) coordination to ensure field activities align with design intent. Support preconstruction activities such as planning, scheduling, and estimating project needs. Maintain clear and consistent communication with project stakeholders, including internal departments, trade partners, and vendors. Support the safety program by following all established safety practices and reporting any hazards or incidents immediately. Qualifications/Skills and Knowledge Requirements Bachelor's degree in Construction Management, Civil Engineering, or related field preferred (or equivalent experience). Foundational understanding of construction processes, terminology, and field operations. Strong verbal and written communication skills with a positive, “ready-to-learn” attitude. Proficiency in Microsoft Office Suite; familiarity with construction management software and platforms such as Bluebeam, AutoCAD, SketchUp, or Revit is a plus. Strong organizational, analytical, and multi-tasking abilities to support a fast-paced construction environment. Ability to collaborate effectively with diverse teams and trade partners. Basic knowledge of construction safety practices and a commitment to maintaining a safe jobsite. Build Your Career The Clancy Way At Clancy & Theys, we believe in developing the next generation of builders and leaders. Field Engineers gain broad exposure to multiple career paths - field management, project management, preconstruction, VDC, and safety - while living our values of Safety, Stewardship, Passion, and Collaboration every day. We offer: Competitive compensation and opportunities for advancement Health, dental, and vision insurance Retirement plan options Paid time off and holidays Mentorship, professional development, and hands-on training Apply today and bring your curiosity, enthusiasm, and commitment to a company that builds with purpose - Careers Built The Clancy Way.

Skanska is searching for a dynamic Field Engineer. This is a great opportunity to start a career with a company that builds things that matter and values its team. We are proud to share our culture of diversity and inclusion. Our work makes a clear contribution to society and the environment around us. We build in many different verticals. (******************************************************** Whether we are building schools to provide inspiring spaces for learning, roads to connect communities or hospitals to care for patients, it all contributes to our purpose - we build for a better society. Skanska's values -Be Better Together, Act Ethically and Transparently, Commit to Customer and Care for Life-are deeply engrained in how we work, which is why our values support and drive our D&I efforts. The Field Engineer has a degree in Engineering or Construction Management. He/she will be required to undertake a variety of construction disciplines such as Safety, Estimating, Project Management and Operations. The Field Engineer will be given responsibility and decision making authority. He / she will not be required to perform manual labor in this position but instead will be required to manage actively and independently those who do. **Field Engineer Required Qualifications:** + Technology proficient, with the ability to adapt to new innovations and processes + Knowledge and efficiency with Microsoft Office products + Requires broad theoretical job knowledge typically obtained through advanced education **Our** Investment (************************************************ **in you:** + We believe that Benefits (********************************************************************** should connect you to the support you need when it matters most, and should help you care for those who matter most. That's why we provide an array of options (including medical, dental, and vision insurance plans), expert guidance, and always-on tools, that are personalized to meet the needs of your reality - to help support you physically, financially, and emotionally through the big milestones and in your everyday life. Please visit the compensation and Benefits (********************************************************************** summary on our careers site for more details. + As a Skanska community, our values ground us, and our diversity of experience propels us forward. No matter what your career stage, there's a place for you to thrive here and partner with us in shaping how our world lives, moves, and connects. + At Skanska, we Care for Life. And we're committed to supporting your whole health and peace of mind through inclusive and personalized total rewards. + We're committed to your success by developing you in your role and supporting your career growth + Compensation and financial well-being (********************************************************************** - Competitive base salary, excellent bonus program, 401k, & Employee ownership program. **Come work with us and join a winning team!** **Background Check Required** Skanska is an Equal Employment Opportunity (EEO) Employer. We do not discriminate on the basis of race, color, religion, sex, national origin, disability, age, genetic information, citizenship, protected veteran status, or any other categories protected under applicable federal, state, and local laws. Skanska Equal Employment Opportunity Skanska uses knowledge & foresight to shape the way people live, work, and connect. More than 135 years in the making, we're one of the world's largest construction and project development companies. With operations in select markets throughout the Nordics, Europe and the United States, global revenue totaled $15.9 billion in 2024. Skanska in the U.S. operates 28 offices across the country, with its headquarters in New York City. In 2024, the U.S. construction sector generated $8.2 billion in revenue, and the U.S. development sector's net investments in commercial projects totaled $224 million. Together with our customers and the collective expertise of our 6,300 teammates in the U.S. and 26,300 globally, we create innovative and sustainable solutions that support healthy living beyond our lifetime. Skanska's Applicant Privacy Policy for California Residents (****************************************************************************************************************** **Search Firm and Employment Agency Disclaimer** _Search Firm and Employment Agency Disclaimer Skanska USA Human Resources ("Skanska HR") provides HR services to the Skanska business units within the U.S.A. including Skanska USA Civil Inc., Skanska USA Building Inc., Skanska USA Commercial Development Inc. and Skanska Infrastructure Development Inc. (collectively "Skanska USA"). As such, Skanska HR is the sole authorized representative of Skanska USA to execute any agreements with search firms, employment agencies or any employment vendor ("Vendor"). As a condition precedent to any entitlement for payment, a Vendor shall have both (1) Skanska USA Placement Agreement, and (2) an Engagement Job Order executed by an authorized Skanska HR representative. Absent the properly executed documents, Skanska HR shall have no obligation to make payment to the Vendor. Verbal or written communications from any employee of Skanska USA business units shall not be considered binding obligations. All resumes whether unsolicited or solicited shall be considered property of Skanska HR._

Thalle Construction Co., Inc. is pleased to announce a career opportunity for a Field Engineer on the Central Everglades Planning Project (CEPP) Everglades Agricultural Area (EAA) A-2 Reservoir in Palm Beach County, Florida. This project marks the largest contract in the Jacksonville District's history, valued at $2.87 billion. Thalle will oversee the construction of a 17.75-mile embankment dam and associated structures. This project offers potential Project Team members a valuable opportunity to broaden their professional experience and advance their careers throughout its duration. The CEPP plays a vital role in Everglades restoration, aiming to enhance ecosystem health, improve water storage, and increase resilience to climate change. Thalle, established in 1947, is a heavy civil construction company with a corporate office located in Hillsborough, NC and a regional office in Alvarado, Texas. Thalle currently has active heavy civil construction projects spanning from New York to South Florida to Texas and continuing to expand our geographical footprint. Our diverse and expansive project scope of heavy civil infrastructure projects incorporates all degrees of civil construction that includes but is not limited to; Conventional Concrete, Roller Compacted Concrete and Earthen Dams, Navigational Waterway Locks, Reservoirs, Large Diameter Underground Utilities, Treatment Facilities, Landfills, Site Work, Mass Soil & Rock Excavation, Coal Ash Closures, DOT Highway & Bridge Construction, and on demand emergency services, etc. We are a proud representative of The Tully Group (Tully) who was established in 1921 and developed into one of the nation's largest privately held, family-owned construction firms. Tully's corporate office, located in New York City, has provided an opportunity to develop and sustain a long history of heavy civil projects in the Metro New York Area and New Jersey. Visit ***************** for more information. Safety is our TOP priority! Thalle offers a competitive salary package with a full range of benefits, including Major Medical, Dental, Vision, Short and Long-Term Disability, generous PTO, paid company holidays, Life Insurance, and 401K with a company match, and more! Compensation is based on experience and qualifications. Thalle is an Equal Opportunity Employer, E-Verify, and Drug Free Workplace. Location: Palm Beach County, FL Job Title: Field Engineer Salary: C ompetitive compensation package based on experience. Essential Duties and Responsibilities: The Field Engineer works to support project operations to plan and construct a safe and quality project. This position is responsible for assisting the Construction Manager and Superintendent with short-term schedules, shop drawings, submittals, scheduling of subcontractors and materials, coordination meetings, as-built drawings, job cost, procurement and field operations. Generate and maintain concrete placement schedules and three week look ahead schedules Conduct planning meeting with project production staff to inform schedule products Track and assemble requirements for daily reporting through quality control personnel Track and report schedule progress in the USACE Resident Management Software (RMS) Track and report production quantities as provided by production supervisors. Document change order work to ensure accurate details are captured to support costs submitted to owner Participates in relevant daily huddles to ensure the projects are expeditiously and profitably constructed. Establishes excellent working and professional relationships with the clients and their representatives and/or field inspectors. Assists the buyout process, writes the requisition, and communicates all required information to the Project Team. Attend applicable subcontractor coordination meetings to provide updates to schedules, drawings, and specifications Complies with safety procedures/policies and addresses and/or elevates non-compliance among all employees, subcontractors, and vendors. Participates in the daily Task Safety Awareness and weekly Safety Meetings. Conduct work with 100% integrity and professionalism Education and/or Work Experience Requirements: Able to prepare reports in Excel and Word Ability to understand and utilize P6 scheduling software, USACE Resident Management Software and Bluebeam. Must have ability to establish effective working relationships with employees, subs and IC's, along with initiative, organization, and planning skills Ability to review and understand plan specs and drawings Able to meet deadlines Minimum 5-10 years' experience in a field environment Proficient in written and verbal business communications skills Physical Requirements: Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards Must be able to lift and carry up to 50 lbs Must be able to talk, listen and speak clearly on telephone

**Requisition ID:** 178180 **Job Level:** Mid Level **Home District/Group:** Marine & Heavy Civil District **Department:** Field Operations **Market:** Marine **Employment Type:** Full Time As a field engineer with TIC Marine & Heavy Civil, you will be a critical member of the construction team. Supervising subcontractors and self-perform work on our marine & infrastructure projects. **District Overview** TIC Marine and Heavy Civil self-performs marine projects with company-owned equipment for both the public and private sector, historically focusing on the southeast coast. Our construction operations are supported by our in-house equipment department, fabrication facility and machine shop to streamline projects for our owners. Using our own equipment and fabrication facility allow us to maintain control over critical scopes, ensuring that the project stays on schedule. Past heavy-civil experiences include cast in place concrete, steel, box beam, flat slab, railroad trestle and arch bridges, bridge widening, bascule and swing bridges, box culverts, storm drainage, erosion control, dike and levee construction, concrete paving, tunnels and sound barriers. Our Marine experience includes lock and dam repairs, docks, demolition, Navy wharfs, water intake structures, steel, concrete, composite and timber piling, fender systems, dolphins, piers, dredging, marinas and LNG facilities **Location** Savannah GA or Jacksonville FL **Responsibilities** **Field Engineering:** - Assist in the interpretation of drawings and specifications for field crews and craft supervision - Perform quantity calculations by taking measurements and determining the percentage of completed/installed materials and work - Assist in the preparation of work plans and work packages - Assist in field surveying and work layout support, including elevation, control points, and compilation of as-built data - Assist in compiling, processing, and confirming daily labor timesheets - Assist in the preparation of Job Hazard Analysis (JHA's) - Participate in job site safety reviews, toolbox meetings, mass safety meetings, and safety training - Order and schedule material deliveries - Plan, schedule, and coordinate work groups on the job site - Supervise field operations **Office Engineering:** - Perform material takeoffs from drawings, specifications, and other contract documents - Perform basic engineering calculations and technical drafting to support field operations - Assist Engineers to gather and prepare data for submittal or transmittal to the customer, vendors, subcontractors, governmental agencies, and internal use - Assist in the preparation of purchase orders and subcontracts, performing minor solicitations and purchasing as requested - Assist in scheduling maintenance and performing updates as directed by others - Assist in the maintenance of basic project recordkeeping and correspondence functions, including daily reports, photographs, requests for information (RFIs), and memorandums - Assist with entering data into the job cost system and participate in reviewing cost reports with job site management - Assist in generating change orders and as-built data to be reviewed by the Project Manager - Provide field support and supervise subcontractor operations **Estimating:** - Assist in reviewing and analyzing historical data relative to the project, incorporating various productions and costs appropriate in preparation of a bid - Complete a plan and specification review for an assigned project, assessing the risk areas and bringing them to the attention of the Senior Estimator - Complete material and quantity takeoffs according to bid documents **Qualifications** - Degree in Construction Management, Civil Engineering, or a closely related degree - 1 - 3 years of experience working in Infrastructure/Heavy Civil construction environment preferred - Interest in heavy civil/marine construction, such as marine, bridges, canals, dams, tunnels, earthwork, structural concrete, pipelines, etc. - Committed to the construction industry and not the design industry- this is a hands-on, construction career - Knowledge and passion for construction safety- OSHA certification preferred - Must be willing to relocate throughout career - The ability to access all points of a construction site in wide-ranging climates, environments, and terrain - Ability to read and interpret construction drawings and specifications - Strong organizational, time management, and multi-tasking skills - Strong written and verbal communication skills - Good attention to detail, with the ability to recognize discrepancies - Strong work ethic - willing to do what it takes to get the job done. This position will require more than 40 hours/week. - Working knowledge of computers and experience with Microsoft Word, Excel, and PowerPoint \#LI-SL1 **Working Conditions** Insert here Other Requirements: + Regular, reliable attendance + Work productively and meet deadlines timely + Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment. + Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. + Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. + May work at various different locations and conditions may vary. We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. Equal Opportunity Employer, including disability and protected veteran status. Company: TIC

Linde Engineering North America LLC Construction Field Engineer Mims, FL, United States | req24113 What you will enjoy doing* * In this role, you will collaborate closely with the Construction Project Manager to develop and execute strategic construction plans, offering expert input on constructability and sequencing * Additionally, you will support on-site construction activities, ensuring compliance with design specifications, safety standards, and project timelines across multiple disciplines including Civil, Mechanical, Electrical, and Instrumentation * You will be responsible to oversee and coordinate subcontractors and field personnel, resolving technical issues and ensuring high-quality workmanship * Further, you will conduct advanced reviews of construction drawings and specifications, identifying potential conflicts and proposing effective solutions * You will also prepare and manage comprehensive construction documentation, including RFIs, change orders, and progress reports, to support procurement and tender processes * Additionally, you will perform detailed material quantity takeoffs and critically evaluate contractor cost proposals for accuracy and value * You also will monitor construction progress, perform quality assurance inspections, and ensure adherence to project schedules and budgets What makes you great * You have a relevant degree such as Bachelor's in Construction Management, Engineering, Construction, Civil Engineering, Mechanical Engineering and at least 10 years of experience in a related industrial construction environment * Must have the perseverance and results-driven attitude * Must be proficient in verbal and written communication Why you will love working with us Linde Engineering Americas (LEA) is a member of the Linde Engineering Division of Linde plc. LEA is a single-source technology, engineering, procurement and construction firm focused on providing innovative solutions to customers. Areas of expertise include hydrogen solutions, air separation, carbon capture, adsorption, gas processing, deep cryogenics, liquefied natural gas (LNG) and fired process equipment. In this role you must learn and abide the Linde Code of Ethics and Code of Conduct by demonstrating honesty, integrity, professionalism in all communications, actions, and decisions. What we offer you! At Linde, the sky is not the limit. If you're looking to build a career where your work reaches beyond your job description and betters the people with whom you work, the communities we serve, and the world in which we all live, at Linde, your opportunities are limitless. Be Linde. Be Limitless. In addition to competitive compensation, we offer a wide range of medical options to suit everyone's needs. Other benefits include; educational and professional development, employee discount program, 401K, pension plan, and life insurance, just to name a few. Have we inspired you? Let´s talk about it We are looking forward to receiving your complete application. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law. Linde acts responsibly towards its shareholders, business partners, employees, society and the environment in every one of its business areas, regions and locations across the globe. The company is committed to technologies and products that unite the goals of customer value and sustainable development. * The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Therefore employees assigned may be required to perform additional job tasks required by the manager. #LI-DNI

**Requisition ID:** 178180 **Job Level:** Mid Level **Home District/Group:** Marine & Heavy Civil District **Department:** Field Operations **Market:** Marine **Employment Type:** Full Time As a field engineer with TIC Marine & Heavy Civil, you will be a critical member of the construction team. Supervising subcontractors and self-perform work on our marine & infrastructure projects. **District Overview** TIC Marine and Heavy Civil self-performs marine projects with company-owned equipment for both the public and private sector, historically focusing on the southeast coast. Our construction operations are supported by our in-house equipment department, fabrication facility and machine shop to streamline projects for our owners. Using our own equipment and fabrication facility allow us to maintain control over critical scopes, ensuring that the project stays on schedule. Past heavy-civil experiences include cast in place concrete, steel, box beam, flat slab, railroad trestle and arch bridges, bridge widening, bascule and swing bridges, box culverts, storm drainage, erosion control, dike and levee construction, concrete paving, tunnels and sound barriers. Our Marine experience includes lock and dam repairs, docks, demolition, Navy wharfs, water intake structures, steel, concrete, composite and timber piling, fender systems, dolphins, piers, dredging, marinas and LNG facilities **Location** Savannah GA or Jacksonville FL **Responsibilities** **Field Engineering:** - Assist in the interpretation of drawings and specifications for field crews and craft supervision - Perform quantity calculations by taking measurements and determining the percentage of completed/installed materials and work - Assist in the preparation of work plans and work packages - Assist in field surveying and work layout support, including elevation, control points, and compilation of as-built data - Assist in compiling, processing, and confirming daily labor timesheets - Assist in the preparation of Job Hazard Analysis (JHA's) - Participate in job site safety reviews, toolbox meetings, mass safety meetings, and safety training - Order and schedule material deliveries - Plan, schedule, and coordinate work groups on the job site - Supervise field operations **Office Engineering:** - Perform material takeoffs from drawings, specifications, and other contract documents - Perform basic engineering calculations and technical drafting to support field operations - Assist Engineers to gather and prepare data for submittal or transmittal to the customer, vendors, subcontractors, governmental agencies, and internal use - Assist in the preparation of purchase orders and subcontracts, performing minor solicitations and purchasing as requested - Assist in scheduling maintenance and performing updates as directed by others - Assist in the maintenance of basic project recordkeeping and correspondence functions, including daily reports, photographs, requests for information (RFIs), and memorandums - Assist with entering data into the job cost system and participate in reviewing cost reports with job site management - Assist in generating change orders and as-built data to be reviewed by the Project Manager - Provide field support and supervise subcontractor operations **Estimating:** - Assist in reviewing and analyzing historical data relative to the project, incorporating various productions and costs appropriate in preparation of a bid - Complete a plan and specification review for an assigned project, assessing the risk areas and bringing them to the attention of the Senior Estimator - Complete material and quantity takeoffs according to bid documents **Qualifications** - Degree in Construction Management, Civil Engineering, or a closely related degree - 1 - 3 years of experience working in Infrastructure/Heavy Civil construction environment preferred - Interest in heavy civil/marine construction, such as marine, bridges, canals, dams, tunnels, earthwork, structural concrete, pipelines, etc. - Committed to the construction industry and not the design industry- this is a hands-on, construction career - Knowledge and passion for construction safety- OSHA certification preferred - Must be willing to relocate throughout career - The ability to access all points of a construction site in wide-ranging climates, environments, and terrain - Ability to read and interpret construction drawings and specifications - Strong organizational, time management, and multi-tasking skills - Strong written and verbal communication skills - Good attention to detail, with the ability to recognize discrepancies - Strong work ethic - willing to do what it takes to get the job done. This position will require more than 40 hours/week. - Working knowledge of computers and experience with Microsoft Word, Excel, and PowerPoint \#LI-SL1 **Working Conditions** Insert here Other Requirements: + Regular, reliable attendance + Work productively and meet deadlines timely + Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment. + Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. + Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. + May work at various different locations and conditions may vary. We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. Equal Opportunity Employer, including disability and protected veteran status. Company: TIC

**Requisition ID:** 177088 **Job Level:** Entry Level **Home District/Group:** Marine & Heavy Civil District **Department:** Field Operations **Market:** Transportation **Employment Type:** Full Time Our mission is to make a difference and we offer opportunities for you to make one too. We depend on our passionate, skilled, and safety-minded construction professionals to get it done right. As a field engineer, you bring your big ideas, commitment to top quality, and an unwavering work ethic. In return, we offer huge career and travel opportunities with the satisfaction of building the next big thing from the ground up. There's a reason TIC attracts the best: we offer fast-paced excitement and fulfillment you won't find anywhere else. In addition, we look to hire you to join the entire Kiewit/TIC family for a career. This is not just a job, single project, or stepping stone. You will be required to perform engineering work in connection with a wide variety of infrastructure projects that range in size, difficulty, and duration. You will also be involved in the district estimating unit at various points in your career, which involves quantity takeoffs, time studies, cost estimating, participating in estimate reviews and bid close-out. **District Overview** **TIC Marine & Heavy Civil** self-performs marine projects with company-owned equipment for both the public and private sector, historically focusing on the southeast coast. Our construction operations are supported by our in-house equipment department, fabrication facility and machine shop to streamline projects for our owners. Using our own equipment and fabrication facility allow us to maintain control over critical scopes, ensuring that the project stays on schedule. Past heavy-civil experiences include cast in place concrete, steel, box beam, flat slab, railroad trestle and arch bridges, bridge widening, bascule and swing bridges, box culverts, storm drainage, erosion control, dike and levee construction, concrete paving, tunnels and sound barriers. Our Marine experience includes lock and dam repairs, docks, demolition, Navy wharfs, water intake structures, steel, concrete, composite and timber piling, fender systems, dolphins, piers, dredging, marinas and LNG facilities. **Location** Savannah, GA is home to TIC Marine & Heavy Civil, a subsidiary of Kiewit. Most of our projects are within a 90-mile radius of the city, allowing our employees to not only to plant roots in the South, but build relationships with our clients. **Responsibilities** Field Engineering + Perform quantity calculations by taking measurements and determining percentage of completed/installed materials and work + Assist in the preparation of work plans and work packages + Assist in field surveying and work layout support including elevation, control points, and compilation of as-built data + Assist in compiling, processing, and confirming daily labor timesheets + Assist in the preparation of Job Hazard Analysis (JHA's) + Assist in providing solutions related to construction operations + Participate in jobsite safety reviews, toolbox meetings, mass safety meetings, and safety training + Order and schedule material deliveries + Plan, schedule, and coordinate work groups on the jobsite + Supervise field operations Office Engineering: + Perform material takeoffs from drawings, specifications, and other contract documents + Perform basic engineering calculations and technical drafting to support field operations + Assist engineers to gather and prepare data for submittal or transmittal to the customer, vendors, subcontractors, governmental agencies, and internal use + Participate in the preparation of purchase orders and subcontracts, performing minor solicitations and purchasing as requested + Schedule maintenance and performing updates as directed by others + Assist in the maintenance of basic project recordkeeping and correspondence functions including daily reports, photographs, requests for information (RFIs), and memorandums + Enter data into the job cost system and participate in reviewing cost reports with jobsite management + Assist in generating change orders and as-built data to be reviewed by the Project Manager + Provide field support and supervise subcontractor operations Estimating: + Assist in reviewing and analyzing historical data relative to the project, incorporating various productions and costs appropriate in preparation of a bid + Complete a plan and specification review for an assigned project, assessing the risk areas and bringing them to the attention of the Senior Estimator + Complete material and quantity takeoffs according to bid documents **Qualifications** - Willingness to relocate to Savannah, GA - Undergraduate or graduate degree in civil engineering, construction management or related degree - Infrastructure/Heavy Civil project experience is preferred - Ability to freely access all points of a construction site in a wide-ranging climates and environments - Highly motivated, with a demonstrated passion for excellence and taking initiative - Strong work ethic, willing to do what it takes to get the job done right the first time - Demonstrated commitment to ethics and integrity - Passion for safety, with the ability to help us ensure that nobody gets hurt - Strong interpersonal, written, and verbal communication skills - Team player with the ability to work independently to meet deadlines, goals, and objectives - Strong organization, time management, and attention to detail Other common names for this role: Office Engineer, Engineer 1, Field Engineer \#LI-SS1 Other Requirements: + Regular, reliable attendance + Work productively and meet deadlines timely + Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment. + Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. + Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. + May work at various different locations and conditions may vary. We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. Equal Opportunity Employer, including disability and protected veteran status. Company: TIC

**Requisition ID:** 171566 **Job Level:** Mid Level **Home District/Group:** Marine & Heavy Civil District **Department:** Field Operations **Market:** Marine **Employment Type:** Full Time As a field engineer with TIC Marine & Heavy Civil, you will be a critical member of the construction team. Supervising subcontractors and self-perform work on our marine & infrastructure projects. **District Overview** TIC Marine and Heavy Civil self-performs marine projects with company-owned equipment for both the public and private sector, historically focusing on the southeast coast. Our construction operations are supported by our in-house equipment department, fabrication facility and machine shop to streamline projects for our owners. Using our own equipment and fabrication facility allow us to maintain control over critical scopes, ensuring that the project stays on schedule. Past heavy-civil experiences include cast in place concrete, steel, box beam, flat slab, railroad trestle and arch bridges, bridge widening, bascule and swing bridges, box culverts, storm drainage, erosion control, dike and levee construction, concrete paving, tunnels and sound barriers. Our Marine experience includes lock and dam repairs, docks, demolition, Navy wharfs, water intake structures, steel, concrete, composite and timber piling, fender systems, dolphins, piers, dredging, marinas and LNG facilities **Location** Savannah, GA **Responsibilities** **Field Engineering:** - Assist in the interpretation of drawings and specifications for field crews and craft supervision - Perform quantity calculations by taking measurements and determining the percentage of completed/installed materials and work - Assist in the preparation of work plans and work packages - Assist in field surveying and work layout support, including elevation, control points, and compilation of as-built data - Assist in compiling, processing, and confirming daily labor timesheets - Assist in the preparation of Job Hazard Analysis (JHA's) - Participate in job site safety reviews, toolbox meetings, mass safety meetings, and safety training - Order and schedule material deliveries - Plan, schedule, and coordinate work groups on the job site - Supervise field operations **Office Engineering:** - Perform material takeoffs from drawings, specifications, and other contract documents - Perform basic engineering calculations and technical drafting to support field operations - Assist Engineers to gather and prepare data for submittal or transmittal to the customer, vendors, subcontractors, governmental agencies, and internal use - Assist in the preparation of purchase orders and subcontracts, performing minor solicitations and purchasing as requested - Assist in scheduling maintenance and performing updates as directed by others - Assist in the maintenance of basic project recordkeeping and correspondence functions, including daily reports, photographs, requests for information (RFIs), and memorandums - Assist with entering data into the job cost system and participate in reviewing cost reports with job site management - Assist in generating change orders and as-built data to be reviewed by the Project Manager - Provide field support and supervise subcontractor operations **Estimating:** - Assist in reviewing and analyzing historical data relative to the project, incorporating various productions and costs appropriate in preparation of a bid - Complete a plan and specification review for an assigned project, assessing the risk areas and bringing them to the attention of the Senior Estimator - Complete material and quantity takeoffs according to bid documents **Qualifications** - Degree in Construction Management, Civil Engineering, or a closely related degree - 1 - 3 years of experience working in Infrastructure/Heavy Civil construction environment preferred - Interest in heavy civil/marine construction, such as marine, bridges, canals, dams, tunnels, earthwork, structural concrete, pipelines, etc. - Committed to the construction industry and not the design industry- this is a hands-on, construction career - Knowledge and passion for construction safety- OSHA certification preferred - Must be willing to relocate throughout career - The ability to access all points of a construction site in wide-ranging climates, environments, and terrain - Ability to read and interpret construction drawings and specifications - Strong organizational, time management, and multi-tasking skills - Strong written and verbal communication skills - Good attention to detail, with the ability to recognize discrepancies - Strong work ethic - willing to do what it takes to get the job done. This position will require more than 40 hours/week. - Working knowledge of computers and experience with Microsoft Word, Excel, and PowerPoint \#LI-LM3 **Working Conditions** Insert here Other Requirements: + Regular, reliable attendance + Work productively and meet deadlines timely + Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment. + Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. + Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. + May work at various different locations and conditions may vary. We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. Equal Opportunity Employer, including disability and protected veteran status. Company: TIC

**Requisition ID:** 177550 **Job Level:** Entry Level **Home District/Group:** TIC Power District **Department:** Field Operations **Market:** Power Employment Type: Full Time As a **Field Engineer,** you bring your big ideas, commitment to top quality and unwavering work ethic. In return, we offer huge career and travel opportunities and the satisfaction of building "the next big thing" from the ground up. There's a reason Kiewit attracts the best: we offer fast-paced excitement and fulfillment you won't find anywhere else. Our mission is to make a difference and we offer opportunities for you to make make a difference in our construction operations. Whether we're boring tunnels through mountains, turning rivers into energy or building bridges that connect communities, we depend on our passionate, skilled, and safety-obsessed construction professionals to get it done right. **District Overview** **TIC Power (TICP)** provides direct-hire construction services for Power Generation utilizing a non-union craft force. TIC Power builds major EPC and bid-build natural gas power plants, solar fields and energy storage systems throughout North America. All of Kiewit Power is committed to Kiewit's "Nobody Gets Hurt" Philosophy. **Location** Although headquartered in Kansas City, our TIC Power district have projects that span across the entire US. Our projects may be built in large cities, small towns, or very remote locations, so our people must be willing to go where the work is. Job assignment location will be determined closer to your start date. Field engineers may do rotations between the field and office work. Candidate must be open to traveling and relocating as business requires. **Responsibilities** + Work with a vibrant and diverse team to build, estimate, and schedule mechanical, electrical and heavy industrial construction. + Support both administrative and construction activities as assigned by supervisor; review proposals, specifications and drawings, perform material takeoffs, prepare cost estimates and attend pre-bid investigation meetings. + Learn to supervise subcontractors and communicate with vendors. + Prepare work plans, assure quality control, manage and track costs and materials, schedule equipment, administer safety programs and maintain exceptional owner relations. + Relocate as required. **Qualifications** + Bachelor's degree in Construction Management, Electrical, Mechanical or Civil Engineering + Knowledge of construction safety and current federal & OSHA requirements + Broad knowledge and ability to understand project scheduling and cost control as well as to read and understand project owner specifications and engineering drawings + Working knowledge and experience with Microsoft Office + Familiarity with SureTrak, Hard Dollar, Revit, SAP, Pro Log and/or Primavera "P6" is a plus + Strong organizational and time management skills + Strong written and verbal communications skills; strong attention to detail with the ability to recognize discrepancies + Strong work ethic - highly motivated and willing to do what it takes to get the job done right + Ability to work independently as well as part of a team + Ability to freely access all points of a construction site in wide-ranging climates and environment + Ability to travel and/or relocate as required + Reliable transportation to and from work \#LI-KK Other Requirements: + Regular, reliable attendance + Work productively and meet deadlines timely + Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment. + Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. + Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. + May work at various different locations and conditions may vary. We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. Equal Opportunity Employer, including disability and protected veteran status. Company: TIC

Skanska is searching for a dynamic Field Engineer I. This is a great opportunity to start a career with a company that builds things that matter and values its team. We are proud to share our culture of diversity and inclusion. The Field Engineer I has a degree in Engineering or Construction Management. He/she will be required to undertake a variety of construction disciplines such as Safety, Estimating, Project Management and Operations. The Field Engineer will be given responsibility and decision making authority. He / she will not be required to perform manual labor in this position but instead will be required to manage actively and independently those who do. **Field Engineer I Qualifications:** + Bachelor's Degree - Construction or Engineering preferred or equivalent experience. + Requires broad theoretical job knowledge typically obtained through advanced education. **Field Engineer I** Benefits (********************************************************************************************************************************************************************************************* **of Working at Skanska:** + Competitive Salary range (based on experience) + Excellent Insurance Package + 401k w/match and Excellent Employee Stock Purchase Plan + An amazing culture focused on Diversity and Inclusion Our work makes a clear contribution to society and the environment around us. Whether we are building schools to provide inspiring spaces for learning, roads to connect communities or hospitals to care for patients, it all contributes to our purpose - we build for a better society. Skanska's values (***************************************************************************** -Be Better Together, Act Ethically and Transparently, Commit to Customer and Care for Life-are deeply engrained in how we work, which is why our values support and drive our D&I efforts. We are on a D&I (****************************************************************************** journey that is ongoing. It is a journey of continuous improvement-while we have come a long way, we still have more to go. **Come work with us and join a winning team!** **Background Check Required** Skanska is an Equal Employment Opportunity (EEO) Employer. We do not discriminate on the basis of race, color, religion, sex, national origin, disability, age, genetic information, citizenship, protected veteran status, or any other categories protected under applicable federal, state, and local laws. Skanska Equal Employment Opportunity Skanska uses knowledge & foresight to shape the way people live, work, and connect. More than 135 years in the making, we're one of the world's largest construction and project development companies. With operations in select markets throughout the Nordics, Europe and the United States, global revenue totaled $15.9 billion in 2024. Skanska in the U.S. operates 28 offices across the country, with its headquarters in New York City. In 2024, the U.S. construction sector generated $8.2 billion in revenue, and the U.S. development sector's net investments in commercial projects totaled $224 million. Together with our customers and the collective expertise of our 6,300 teammates in the U.S. and 26,300 globally, we create innovative and sustainable solutions that support healthy living beyond our lifetime. Skanska's Applicant Privacy Policy for California Residents (****************************************************************************************************************** **Search Firm and Employment Agency Disclaimer** _Search Firm and Employment Agency Disclaimer Skanska USA Human Resources ("Skanska HR") provides HR services to the Skanska business units within the U.S.A. including Skanska USA Civil Inc., Skanska USA Building Inc., Skanska USA Commercial Development Inc. and Skanska Infrastructure Development Inc. (collectively "Skanska USA"). As such, Skanska HR is the sole authorized representative of Skanska USA to execute any agreements with search firms, employment agencies or any employment vendor ("Vendor"). As a condition precedent to any entitlement for payment, a Vendor shall have both (1) Skanska USA Placement Agreement, and (2) an Engagement Job Order executed by an authorized Skanska HR representative. Absent the properly executed documents, Skanska HR shall have no obligation to make payment to the Vendor. Verbal or written communications from any employee of Skanska USA business units shall not be considered binding obligations. All resumes whether unsolicited or solicited shall be considered property of Skanska HR._

Thalle Construction Co., Inc. is pleased to announce a career opportunity for a Field Engineer on the Central Everglades Planning Project (CEPP) Everglades Agricultural Area (EAA) A-2 Reservoir in Palm Beach County, Florida. This project marks the largest contract in the Jacksonville District's history, valued at $2.87 billion. Thalle will oversee the construction of a 17.75-mile embankment dam and associated structures. This project offers potential Project Team members a valuable opportunity to broaden their professional experience and advance their careers throughout its duration. The CEPP plays a vital role in Everglades restoration, aiming to enhance ecosystem health, improve water storage, and increase resilience to climate change. Thalle, established in 1947, is a heavy civil construction company with a corporate office located in Hillsborough, NC and a regional office in Alvarado, Texas. Thalle currently has active heavy civil construction projects spanning from New York to South Florida to Texas and continuing to expand our geographical footprint. Our diverse and expansive project scope of heavy civil infrastructure projects incorporates all degrees of civil construction that includes but is not limited to; Conventional Concrete, Roller Compacted Concrete and Earthen Dams, Navigational Waterway Locks, Reservoirs, Large Diameter Underground Utilities, Treatment Facilities, Landfills, Site Work, Mass Soil & Rock Excavation, Coal Ash Closures, DOT Highway & Bridge Construction, and on demand emergency services, etc. We are a proud representative of The Tully Group (Tully) who was established in 1921 and developed into one of the nation's largest privately held, family-owned construction firms. Tully's corporate office, located in New York City, has provided an opportunity to develop and sustain a long history of heavy civil projects in the Metro New York Area and New Jersey. Visit ***************** for more information. Safety is our TOP priority! Thalle offers a competitive salary package with a full range of benefits, including Major Medical, Dental, Vision, Short and Long-Term Disability, generous PTO, paid company holidays, Life Insurance, and 401K with a company match, and more! Compensation is based on experience and qualifications. Thalle is an Equal Opportunity Employer, E-Verify, and Drug Free Workplace. Location: Palm Beach County, FL Job Title: Field Engineer Salary: Competitive compensation package based on experience. Essential Duties and Responsibilities: The Field Engineer works to support project operations to plan and construct a safe and quality project. This position is responsible for assisting the Construction Manager and Superintendent with short-term schedules, shop drawings, submittals, scheduling of subcontractors and materials, coordination meetings, as-built drawings, job cost, procurement and field operations. * Generate and maintain concrete placement schedules and three week look ahead schedules * Conduct planning meeting with project production staff to inform schedule products * Track and assemble requirements for daily reporting through quality control personnel * Track and report schedule progress in the USACE Resident Management Software (RMS) * Track and report production quantities as provided by production supervisors. * Document change order work to ensure accurate details are captured to support costs submitted to owner * Participates in relevant daily huddles to ensure the projects are expeditiously and profitably constructed. * Establishes excellent working and professional relationships with the clients and their representatives and/or field inspectors. * Assists the buyout process, writes the requisition, and communicates all required information to the Project Team. * Attend applicable subcontractor coordination meetings to provide updates to schedules, drawings, and specifications * Complies with safety procedures/policies and addresses and/or elevates non-compliance among all employees, subcontractors, and * vendors. * Participates in the daily Task Safety Awareness and weekly Safety Meetings. * Conduct work with 100% integrity and professionalism Education and/or Work Experience Requirements: * Able to prepare reports in Excel and Word * Ability to understand and utilize P6 scheduling software, USACE Resident Management Software and Bluebeam. * Must have ability to establish effective working relationships with employees, subs and IC's, along with initiative, organization, and planning skills * Ability to review and understand plan specs and drawings * Able to meet deadlines * Minimum 5-10 years' experience in a field environment * Proficient in written and verbal business communications skills Physical Requirements: * Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. * Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards * Must be able to lift and carry up to 50 lbs * Must be able to talk, listen and speak clearly on telephone Apply to this job

Looking for your next big opportunity? We're always building relationships with top talent for this vital role. Apply today-our team is reviewing applications and eager to connect! Why Thompson Thrift? At Thompson Thrift, we don't just build properties; we craft communities and shape futures. Our core values drive us to positively impact our team and the communities we serve through initiatives like TT Serve, which supports community outreach and personal development. We also prioritize work-life balance with our Family Impact Program, offering flexible work options, concierge medical services, financial planning, and more to support your well-being and connections with loved ones. Your Role as a Field Engineer Thompson Thrift is looking for a motivated and detail-driven Field Engineer to be the heartbeat of our on-site operations. In this dynamic role, you'll play a key part in keeping projects on track, on time, and on budget-ensuring everything runs like a well-oiled machine from the ground up. As our go-to person on-site, you'll be involved in every phase of the construction process, coordinating teams, tackling challenges, and supporting smooth execution day in and day out. If you thrive in a fast-paced environment and love being where the action is, this is the opportunity for you. Key Responsibilities: Working closely with the project team to monitor project safety, cost, scheduling, quality control, and punch list completion. Completing, updating, and correctly filing quality control checklists. Assisting with the coordination of material deliveries as directed by site management. Coordinating and take responsibility for the successful completion of specific trades or scopes of work performance from their start of work through final punch. Overseeing and providing day-to-day guidance to subcontractors and their hourly trade employees. Assisting with punch process as directed by site management. Assisting as needed with the daily reporting of subcontractor headcount on the worksite for each of the required construction trades. Ensuring job site safety by policing and assisting with clean-up. Submitting notifications of inadequate cleanup with pictures to responsible subcontractor and ensuring situations are resolved. Taking pictures as needed of construction progress on a daily/weekly basis and saving them in the appropriate job files. Assisting the project team in any capacity directed. Our Ideal Candidate: Education: Bachelor's degree in construction management, civil engineering, or a related field; equivalent experience will be considered. Experience: At least 1 year of construction experience required. Relevant internships or equivalent hands-on experience in construction may also be considered to meet this requirement. Foundational knowledge of construction terminology, processes, and plan reading. Exposure to construction scheduling, cost tracking, and job site safety practices. Proficient with basic computer applications, including Microsoft Office; familiarity with Procore or similar construction software is a plus. Strong communication skills-both written and verbal-with a collaborative, team-oriented mindset. Self-motivated with a proactive attitude, problem-solving skills, and a strong desire to learn and grow within the company. Receptive to feedback and able to follow through on direction to ensure tasks are completed effectively. Required Certifications (must be obtained within 90 days of hire): First Aid/CPR OSHA 30-Hour Construction Safety and Health Training Compensation and Benefits: Total Rewards: We offer competitive base salaries with project bonus potential, subsistence pay, cell phone stipends, auto allowances, merit increases, paid holidays, Paid Time Off, and comprehensive medical, dental, vision, short- and long-term disability benefits, along with a 401(k) plan with a match. Work Environment & Physical Demands This position requires mobility on active construction sites and the ability to lift up to 25 lbs. Tasks may involve exposure to outdoor elements, uneven surfaces, power tools, and loud environments. The team member is required to work in compliance with company safety policies, procedures, and applicable laws.

JobID: 8635 JobSchedule: Full time JobShift: Day : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities, and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America. Job Summary Assists the Project Engineer with being the technical source of information for the project. Responds to questions about drawings, specifications, shop drawings, and change orders and have responsibility for assisting in writing change orders, RFl's, meeting minutes, and reviewing Submittals. Maintains an effective and professional working relationship with owners, architects, engineers, subcontractors, and suppliers. This position includes three 'steps' (I, II and Senior), which provide for a progression of skill and experience. Step I is the entry level for individuals with a minimum of experience in this position. Step II is used for employees with 2 years of experience in this position, or with experience on larger and more complex projects. The 'Senior' step is used for employees with more than 4 years of experience and/or experience on significantly larger or more complex projects. Key Responsibilities 1. Assists Project Engineer in developing and maintaining as-built drawings and other work tasks and assists with or reviews and processes submittals, change orders, RFl's, and budget forecasting. Ensures the timely and appropriate generation, collection, distribution, storage, retrieval and ultimate disposition of meeting agendas, RFl's and daily reports. 2. Demonstrates an understanding of the project management plan (PMP) and is involved in support and execution of the plan. Demonstrates a thorough understanding of the change management process and performs project scope activities and supports the project team to ensure the work needed to complete the project successfully. 3. Ensures the administration of the project quality management plan and demonstrates and reinforces a culture of safety throughout the project. 4. May assist in the calculation of daily production rates and unit costs for self-performed work. Participates in risk management including identification, analysis, response planning and monitoring and control on a project and demonstrates competency in understanding the environmental control processes for the project and takes corrective actions when necessary. 5. May be responsible for overseeing/managing the BIM (Building Information Modeling) Coordination between Subcontractors and Designers. 6. May be responsible for the documentation and submittal for the LEED (Leadership in Energy and Environmental Design) Certification of a building and for creating and updating Digital Record Drawings (ORD). 7. May provide lines, grades and layout as required for the project while maintaining an organized log book. 8. May provide the following weekly quantities: maintains accurate quantity logs and reports quantities in compliance with the cost control manual. Completed logs are to be filed with the project files. Perform elements of the processes involved in budgeting and controlling costs so that the project can be completed within the approved budget. Demonstrates business acumen within area of responsibility. (Not all Field Engineers track quantities) 9. Provides support to superintendents required for the execution of the work and assists in the resolution of field problems as necessary. Minimum Job Requirements 1. Ability to assume responsibility, interface and communicate with others is essential. 2. Entry-level position that normally requires a four-year construction-related degree or equivalent technical/field experience. 3. Microsoft Office Suite (Outlook, Word, Excel, PowerPoint, etc.) proficiency. Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KW1

Responsibilities Brasfield & Gorrie is seeking a Systems Engineer focused on Endpoint Management to join our team. In this on-site role, you will be responsible for designing, deploying, and optimizing our modern workplace solutions using Microsoft Intune and related tools. You will play a critical part in securing, managing, and enhancing endpoints (Windows, MacOS, iOS) to enable productivity and a streamlined user experience throughout the organization. Key Responsibilities: Modern Endpoint Management * Configure and administer Microsoft Intune for device lifecycle management (Windows, iOS) * Maintain and update Windows Autopilot profiles for device deployment * Deploy and manage applications using Intune, Patch My PC, and other modern deployment tools * Manage patching processes via Windows Update for Business, Microsoft Autopatch, and Azure Update Manager Mobile Device & App Management * Administer Mobile Device Management (MDM) and Mobile Application Management (MAM) policies in Intune * Manage MacOS endpoints using JAMF Automation & Scripting * Utilize PowerShell scripting to automate endpoint management, deployment, and remediation tasks Security & Compliance * Implement and support security baselines, device compliance policies, and endpoint protection mechanisms * Ensure application, patch, and device inventories are accurate and up to date Collaboration & Support * Work closely with security, networking, and service desk teams for effective endpoint management and troubleshooting * Provide documentation and knowledge transfer for operational support teams Education - Skills - Knowledge - Qualifications & Experience Required: * 3-5+ years of experience in endpoint management, systems engineering, or a related IT role * Bachelor's degree in technology-related field or relevant certifications * Significant hands-on experience with: * Microsoft Intune for device and app management * Modern app deployment frameworks (Intune, Patch My PC) * Operating System Deployment and Device Provisioning (Autopilot) * MacOS management with JAMF and/or Intune * Operating system and application patching (Windows Update for Business, Autopatch) * PowerShell scripting for automation and operational tasks * Solid understanding of device lifecycles, deployment, and modern workplace best practices * Strong troubleshooting and documentation skills * Ability to work independently and collaboratively across teams * Fast learner, detail-oriented, and adaptable to evolving technologies Preferred: * Microsoft certifications * Experience with Azure services or hybrid cloud environments * Prior experience supporting enterprise-scale endpoint management projects