Electrical engineer jobs in Wakefield, MA - 1,388 jobs

Draper is an independent, nonprofit research and development company headquartered in Cambridge, MA. The 2,000+ employees of Draper tackle important national challenges with a promise of delivering successful and usable solutions. From military defense and space exploration to biomedical engineering, lives often depend on the solutions we provide. Our multidisciplinary teams of engineers and scientists work in a collaborative environment that inspires the cross-fertilization of ideas necessary for true innovation. For more information about Draper, visit *************** Summary Draper Laboratory is seeking talented and motivated individuals to tackle challenging engineering problems in advanced digital IC design. As a Senior Digital ASIC Designer, you will be responsible for designing high-performance digital ASICs in advanced technologies. You will be responsible for implementing designs from RTL through synthesis. You will work in multi-disciplinary teams with opportunities to learn, grow and contribute to a variety of projects in different application areas. Duties/Responsibilities Design and simulate circuits at transistor-level to implement architecture and requirement specifications Contribute to system-level design Optimize hardware designs for performance, power, and cost Evaluate the hardware feasibility of complex algorithms and requirements Independently contribute to complex chip architectures and designs Independently drive solutions to complex problems - develop requirements, propose ways forward when customer requirements are unclear or incomplete, and adapt appropriately to changes in requirements Contribute to business development and proposal activities Develop, document, and teach best practices to less experienced engineers Perform or guide physical layout, including floor-planning, and simulate circuits using extracted parasitics, contribute to design-for-test development Perform other duties as assigned Skills/Abilities Proficiency in integrated circuit design Understanding of integrated circuits, semiconductors, and general computer architecture Ability to write detailed design specifications Ability to lead multi-disciplinary technical teams Excellent verbal and written communication skills Excellent mathematical skills Excellent organizational skills and attention to detail Excellent time management skills with the proven ability to meet deadlines Strong analytical and problem-solving skills Ability to prioritize tasks Demonstrate strong organization, planning, and time management skills to achieve program goals Education Requires a bachelor\'s degree in Engineering, or related field. Masters degree preferred. Experience Requires 7-10 years of experience with a bachelor\'s degree, or 5-10 years of experience with a master\'s degree in ASIC Hardware Engineering or related. Preferred Qualifications Experience with low power circuit design Experience with CMOS advanced nodes below 32nm Experience with radiation-hardened electronics Additional Job Description Applicants should possess solid skills in front-end digital systems design with experience in design flows from Cadence or Synopsys. Be fluent in System Verilog, Verilog or VHDL and familiar with LINT, simulation and synthesis. Familiarity with architectures for secure systems design, e.g., cryptographic encoders / decoders or tagged processor architectures is a plus. Demonstrated experience with successful tape-outs at advanced nodes is desired. Experience leading and managing design teams is also desired. This position requires onsite work in Cambridge, MA. Applicants selected for this position will be required to obtain and maintain a U.S. Security Clearance. Connect With Draper for Future Opportunities! If you don\'t find the right posting in our Career Opportunities, you may submit your resume for future consideration. Job Location - City: Cambridge Job Location - State: Massachusetts Job Location - Postal Code: 02139-3563 The US base salary range for this full-time position is $95,000.00 - $237,500.00 Our salary ranges are determined by role, level, and location. The range displayed on each job posting reflects the minimum and maximum target salaries for the position across all US locations. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. Union ranges will be in compliance with the collective bargaining agreement\'s approved rates by location and role. Your recruiter can share more about the specific salary range for your preferred location during the hiring process. Please note that the compensation details listed in US role postings reflect the base salary only, and does not include bonuses or benefits. Our work is very important to us, but so is our life outside of work. Draper supports many programs to improve work-life balance including workplace flexibility, employee clubs ranging from photography to yoga, health and finance workshops, off site social events and discounts to local museums and cultural activities. If this specific job opportunity and the chance to work at a nationally renowned R&D innovation company appeals to you, apply now *********************** Draper is committed to creating an inclusive environment. We understand the value of inclusivity and its impact on a high-performance culture. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, national origin, veteran status, or genetic information. Draper is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, please contact *************. About the company Draper Be vigilant about potential scams, phishing attempts, or fraudulent activities, and seek credible sources or reviews to assess the trustworthiness of the company. Remember, your personal and financial security is paramount, and taking preventive measures is crucial to safeguarding your information from potential risks and unauthorized use. SupportFinity is not responsible for any consequences that may arise from disclosing such information to unauthorized or fraudulent entities. #J-18808-Ljbffr

A leading technology provider in Boston is seeking a Senior Project Engineer - Electrical to lead complex projects from design to commissioning. Candidates should have extensive experience in electrical building infrastructure and a strong ability to mentor teams. This position offers competitive compensation and opportunities for career growth, making it ideal for motivated individuals dedicated to customer service. #J-18808-Ljbffr

$95,000 - $130,000 Depending on Experience plus full benefits, annual bonus, 401(k) match 4%, profit sharing, PTO, short- and long-term disability RemX is seeking a Controls Engineer to design electrical systems, develop PLC/HMI software, and support automated packaging equipment for a global OEM. The ideal candidate will have experience with PLC programming, electrical schematics, panel design, and supporting equipment startup and troubleshooting. This role offers the opportunity to work with advanced automation technology and contribute to high-performance packaging machinery used worldwide. Note: This position requires 10% travel $95,000 - $130,000 DOE plus full benefits, annual bonus, 401(k) match 4%, profit sharing, PTO, short- and long-term disability 3+ years of PLC/HMI programming and electrical design experience Work with automated equipment used in advanced packaging and processing systems Join a global OEM known for innovation, technical depth, and long-term employee development The Company: Over 50+ year-old OEM manufacturing company of high-precision machinery, particularly for the industrial automation and manufacturing industries Become part of a team-focused technical group that values collaboration and teamwork Excellent Compensation: $95,000 - $130,000 DOE plus full benefits, annual bonus, 401(k) match 4%, profit sharing, PTO, short- and long-term disability The Position: Design and develop PLC, HMI, servo, and motion control programs for automated packaging machinery (Rockwell, Siemens, B&R) Create and update electrical schematics, control panel layouts, and power distribution designs using AutoCAD Electrical Support equipment startup, debugging, and commissioning at the facility and occasionally at customer sites Provide troubleshooting support to assembly teams and field service technicians for electrical and software-related issues Develop system upgrades, enhancements, and solutions for field-reported issues Collaborate with engineering and project management to support project schedules and machine build timelines Ensure all designs follow applicable regulations including NEC, NFPA 70, and cGMP Participate in training, trade shows, and technical events to stay current with industry trends and competitive technologies The Details: 3+ years of experience in automation, controls engineering, or machinery manufacturing Hands-on experience with PLCs, HMIs, and motion control systems (Rockwell, Siemens, B&R)

Founded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With nine offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI's technology actively supports operations worldwide. For more information, visit ************** Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description: At Shield AI, we are revolutionizing defense technology to protect service members and civilians with intelligent, autonomous systems. Our Hardware Test Engineering team plays a critical role in ensuring the V-BAT remains the most reliable, mission-ready UAV in the industry. We design cutting-edge test solutions-custom-built electrical and mechanical systems that push our hardware to its limits in real-world and extreme environments. As a Senior Electrical Engineer on our Hardware Test team, you will own the design and development of test systems that push our hardware to its limits. From designing custom PCBs and automated test sequences to developing electrical and mechanical test stands, you'll be at the forefront of ensuring the highest reliability in aerospace hardware. This is a high-impact role where your expertise in power electronics, RF, communications, and automation will help shape the future of intelligent defense systems. What you'll do: Lead the design, validation, and deployment of advanced test systems for V-BAT's critical components and subsystems. Architect PCBs and test interfaces for power electronics, RF, and communication systems. Develop automated test sequences in Python, ensuring scalability, efficiency, and repeatability. Design and integrate custom test fixtures, including relays, PLCs, PCBAs, and harnessing. Own and drive cross-functional design reviews, advocating for design-for-testability (DFT) improvements. Work hands‑on with HASS, ESS, and HALT testing, validating performance in simulated harsh environments. Be a technical mentor, guiding junior engineers and contributing to Shield AI's growing expertise in hardware test engineering. Other duties as assigned. Required qualifications: B.S. in Electrical Engineering or related STEM field. 3+ years of industry experience in hardware design and test engineering (or equivalent experience with advanced degrees). Deep expertise in electrical design, mechanical, and software engineering principles as applied to hardware test systems. Proven ability to design, implement, and validate multidisciplinary hardware systems in a fast-paced, high-stakes environment. Track record of ownership-driving projects from concept to execution, delivering exceptional results. A team-first mindset, with high standards for yourself and others, and a passion for solving complex technical challenges. Track record of working hard, being a trustworthy teammate, holding yourself and others to high standards, and being kind to others. Preferred qualifications: Proficiency in Python or another scripting language for test automation. Hands‑on experience with PCB design tools (Altium, KiCAD, Eagle) and CAD software (SolidWorks, NX, CATIA). Experience working in rugged, high-reliability industries like aerospace, defense, or automotive. Strong problem-solving skills with the ability to pivot quickly in dynamic, evolving environments. $115,527 - $173,291 a year Full-time regular employee offer package: Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package: Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part‑time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information. Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. #J-18808-Ljbffr

A major transportation company is looking for a Power Director (Trainee) in Boston, MA. This role involves managing electric traction power distribution on the Northeast Corridor, ensuring safe operations, and supervising a team. Candidates should possess a high school diploma, a valid driver's license, and experience with spreadsheets. Offering a salary range of $40.40 to $53.86 per hour along with comprehensive benefits. Embrace a career where you can find challenging work and rewarding opportunities. #J-18808-Ljbffr

The Principal Supplier Engineer, External Operations, Global sourcing APAC, will lead the SFMD(Sourced Finished Medical Device) products on-boarding process in BSC and manage the engineering changes associated with these products by closely working with BSC internal team as well as the team from external operation partner(CM's, OEM's, etc.) from APAC region. This position is part of the supplier management core team and entails driving improvements at BSC's Suppliers of finished medical devices. Job Responsibilities Manage projects which include new production development , process improvements, and cost reductions while supporting day to day operations success of assigned key SFMD suppliers. Works cooperatively with PMO, R&D, Process Development, Quality, Production, Regulatory, Equipment Engineering, Supply Chain, and Marketing to ensure project success. Successfully contributes to both new product development and current product sustaining support, typically including the following activities: New products on boarding, change management, process improvement, Value Improvement projects (VIP's) and function as a SME in manufacturing engineering field including process capability studies, DOE, Six Sigma and capacity analysis, report preparation and process/test documentation. Support the on-site assessment of SFMD suppliers by closely working with SQE and commercial sourcing, can evaluate the supplier manufacturing capability independently and provide inputs for supplier selection. Manage supplier performance from technique perspective and work closely with supplier category team to score and drive improvement of supplier performance. Independently executes plans to support supply chain objectives, supplier performance, supplied product risk mitigation and execution of VIP's with minimal guidance from management team. Can communicate plans at a high level within the organization and organize projects by requesting support at external operations management level. Proficient in the use of all business tools. Ability to independently design and coordinate engineering tests and experiments including Design of Experiments. Ability to independently troubleshoot new and existing product/process problems related to design, material, or processes. Summarizes, analyzes, and draws conclusions from test results , and prepares standard reports/documents to communicate results to the technical community. Proficient in the use of statistical tools (re. Six Sigma Black Belt). Broad familiarity with analytical techniques commonly used to investigate component defects. Ability to summarize and present results of technical analyzes and activities to a broad audience. Acts as a resource and mentor for colleagues with less experience Job Requirements Candidate required to process bachelor degree in Engineering from ABET accredited institutions or prestigious universities 10 + years of manufacturing /procurement engineering experience Proven organization and execution skills Proven ability to solve technical problems and implement solutions Proven leadership skill and team player with the ability to drive tasks / projects to completion Willing and able to work with engineers and technical staff from a SFMD Suppliers at a different site. Strong verbal and written communication skills ; Ability to work in a global matrix with SME's from global functions; Ability to travel 25% of the time (Including International). Travel typically does not occur over weekends. Preferred Qualifications Experience in the MNC's in Medical Device industry Manufacturing engineering or supplier engineer experience Familiar with ISO13485 and FDA QSR820 About Us As a global medical technology leader for more than 40 years, our mission at Boston Scientific (NYSE: BSX) is to transform lives through innovative medical solutions that improve the health of patients. If you're looking to truly make a difference to people both around the world and around the corner, there's no better place to make it happen. Job Segment: Six Sigma Black Belt, Medical Device, Six Sigma, Supply Chain, Medical Device Engineer, Management, Healthcare, Operations, Engineering #J-18808-Ljbffr

Rangam is seeking candidates for a Direct Hire role as a Design Control Engineer III with our client, one of the world's largest pharmaceutical companies. Seeking candidates in Andover, MA & Chesterfield, MO or willing to relocate. ROLE SUMMARY This position will be part of BTx Pharmaceutical Research & Development located in St.Louis, MO or Andover, MA. The incumbent will lead design control projects for biologics modalities developed as prefilled syringe-based combination products throughout the product and design control lifecycle. They will interact with cross functional development teams working with all levels of employees. ROLE RESPONSIBILITIES Ensures that combination product development activities are compliant with quality and regulatory standards - both internal and external. Lead design control and risk management activities for combination product development programs, ensuring deliverables are appropriately authored, approved, and maintained to support clinical trials and commercial licensures. Provide input and support for design validation, including but not limited to human factors engineering assessments. Support the generation of all regulatory submission data and content for assigned device projects. Support the assessment of external design companies and suppliers for capability of quality systems, facilities, and procedures to support device development and supply. Support device design and manufacturing investigations from devices used in clinical trials and commercial manufacture. Support internal and external audits of the DPDD Quality System. QUALIFICATIONS Must Have BS degree in appropriate Science & Engineering discipline (Chemistry, Biochemistry; Biomedical, Mechanical, Materials, Chemical Engineering; or other related discipline) with a minimum of 6 to 8 years of relevant experience in the Pharmaceutical Combination Product and/or Device industries. OR MS degree in appropriate Science & Engineering discipline (Chemistry, Biochemistry; Biomedical, Mechanical, Materials, Chemical Engineering; or other related discipline) with a minimum of 4 to 6 years of relevant experience in the Pharmaceutical Combination Product and/or Device industries. Thorough working knowledge of ISO 9001, ISO 13485, ISO 14971, 21 CFR 820, ISO 11040 and the EU Medical Devices Directive. Working knowledge of EN 62366 and EU Medical Devices Regulation. Capable of working independently with minimal supervision High level of attention to technical details and accuracy. Able to prioritize multiple responsibilities and to work on multiple tasks simultaneously. Able to work collaboratively in cross functional teams. Excellent communication (e.g. oral, written, presentation) and interpersonal relationship skills. Proficiency in general computer software such as word processing, spreadsheets, presentations. Understand Good Manufacturing Practices (GMP) Nice To Have Knowledge of current US and global Regulations, FDA and ICH guidance, ISO standards for syringes/injectors, luer connectors, and quality system regulations (Part 4) for combination products Experience in Design Controls for Combinations Products Device Risk Management expertise Understand statistical sampling plan and statistical analysis of test results. Familiar with Human Factors Engineering - Usability Engineering. Understand project management methodologies and capable to provide technical leadership for projects. Familiar with device assembling manufacturing process Ability to perform mathematical calculations and ability to perform complex data analysis. Other Job Details Work Location Assignment: On Premise The annual base salary for this position ranges from $77,100.00 to $128,500.00. In addition, this position is eligible for participation in client's Global Performance Plan with a bonus target of 7.5% of the base salary. We offer comprehensive and generous benefits and programs to help our colleagues lead healthy lives and to support each of life's moments. Benefits offered include a 401(k) plan with client's Matching Contributions and an additional client's Retirement Savings Contribution, paid vacation, holiday and personal days, paid caregiver/parental and medical leave, and health benefits to include medical, prescription drug, dental and vision coverage. Learn more at client's Candidate Site - U.S. Benefits | (uscandidates.my**benefits.com). Compensation structures and benefit packages are aligned based on the location of hire. The United States salary range provided does not apply to Tampa, FL or any location outside of the United States. Relocation assistance may be available based on business needs and/or eligibility. To find out more about Rangam and this role, click the apply button. Satnam Singh SA Technical Recruiter | Rangam Consultants, Inc M: ************** E: *****************| W: **************

Electrical Field Engineer - Bio-Pharmaceutical / Life Science Facilities Employment Type: Full-Time We are seeking an experienced Electrical Field Engineer to support the design, installation, and commissioning of complex electrical systems within Bio-Pharmaceutical, Life Science, and Mission Critical facilities. The ideal candidate will bring strong technical expertise, field experience, and project management skills to ensure safe, compliant, and efficient project delivery from design through turnover. Key Responsibilities Lead and support the design, coordination, and field implementation of electrical systems including power distribution, lighting, grounding, and controls. Collaborate with internal engineering teams, construction partners, and clients to ensure all electrical work aligns with design intent, codes, and project requirements. Provide field-based technical oversight during installation, startup, and commissioning activities. Manage project schedules, budgets, and technical documentation for multiple concurrent projects. Support troubleshooting, root cause analysis, and resolution of electrical issues in the field. Interface with other disciplines (mechanical, process, controls, and instrumentation) to ensure system integration and project success. Review and approve vendor submittals, shop drawings, and field change documentation. Ensure compliance with all safety, environmental, and GMP (Good Manufacturing Practice) standards. Drive continuous improvement of design standards, construction methods, and commissioning processes. Qualifications Bachelor's degree in Electrical Engineering or related field (PE license preferred). 7+ years of experience in electrical engineering for Bio-Pharmaceutical, Life Science, or Mission Critical facility projects. Strong knowledge of NEC, NFPA, IEEE, and local electrical codes. Proven ability to manage the electrical scope of complex design and construction projects from concept through commissioning. Hands-on field experience supporting electrical installation, testing, and commissioning. Excellent communication, teamwork, and organizational skills. Proficiency in AutoCAD, Revit, and related electrical design tools is a plus.

Role: Full Stack Engineer focused on building and managing a cloud-based application security system. Location: Multiple options available including Boston/East Coast, SF Bay Area/West Coast, and remote within the USA Mission: Live at the intersection of app runtime & security. Protect applications in a fundamental way so that developers can build great application services and not be constantly looking over their shoulder. Bluerock is changing the landscape of App runtime security. Responsibilities - Backend Development: Develop and maintain web-based microservices for security apps, infrastructure policy management and orchestration Design and implement Kubernetes services and custom resource definitions for multi-cloud provisioning Build robust APIs for managing Kubernetes clusters, buckets, and cloud infrastructure across AWS, GCP, and Azure Implement intelligent policy validation and drift detection for infrastructure-as-code Create sophisticated Helm charts, Terraform modules, CloudFormation templates, and Kubernetes operators for automated deployments Manage complex YAML templating systems and configuration management workflows Design event-driven architectures for real-time infrastructure monitoring and remediation Build integration layers between Kubernetes controllers and cloud provider APIs Responsibilities - Frontend Development: Design and develop sophisticated infrastructure management dashboards using modern web frameworks and templating systems Create interactive policy editors with real-time validation and syntax highlighting Build comprehensive infrastructure topology visualizations and dependency mapping Develop intuitive cluster management interfaces with drag-and-drop resource allocation Implement advanced data tables for managing fleets, and policies, configuration and analysis applications Create responsive dashboards for monitoring deployment status and health Build user-friendly forms for complex infrastructure configuration with guided workflows Develop real-time status monitoring with WebSocket-based updates and polling mechanisms Implement role-based access controls and multi-tenant infrastructure views Create data visualizations using tools like D3.js and Chart.js Build user interfaces using modern frameworks such as React, Vue.js, or Angular Ensure user-friendly and accessible interfaces Optimize performance for high data volumes Develop responsive designs for mobile and desktop platforms Implement advanced UI features like drag-and-drop functionality Create reusable UI components Develop data tables and search capabilities Contribute to maintaining a consistent product design language Security Focus Ensure adherence to security standards Develop secure communication channel Implement comprehensive audit logging Technology Stack Programming Languages: Go, Rust, Python, TypeScript/JavaScript Frameworks: Gin, React/Vue.js, Node.js, Django, or modern web frameworks (propose and champion alternatives) Databases: PostgreSQL, Redis, InfluxDB, Cloud specific Cloud Platforms: AWS, GCP, Azure, Kubernetes Infrastructure: Crossplane providers, Helm charts, YAML templating, infrastructure-as-code Monitoring: CloudWatch, OpenTelemetry, Prometheus, Grafana, real-time status polling Tools: Docker, GitLab CI, Terraform, Helm, container orchestration Required Qualifications 5+ years of Full Stack development experience with strong backend web framework expertise Deep understanding of Kubernetes architecture, CRDs, controllers, and operators Experience with infrastructure-as-code tools (Crossplane, Terraform, or similar) Proficiency in YAML templating and complex configuration management Strong frontend skills with modern templating systems, JavaScript, and responsive design frameworks Hands-on experience with AWS services (S3, EKS, VPC, IAM) Understanding of cloud-native patterns and microservices architecture Experience with containerization (Docker) and orchestration platforms Knowledge of GitOps workflows and CI/CD pipeline automation Preferred Qualifications Experience with security tools Advanced knowledge of Kubernetes and system-level operations Background in Cybersecurity Experience working with real-time data systems Understanding of cryptographic concepts Proven track record of working on large-scale, distributed systems About BlueRock: BlueRock is a well-funded, early stage cybersecurity company founded by experienced security minded entrepreneurs. Our mission is to change the game in cybersecurity. Attackers are exploiting in hours. The dependency tree is exploding. Developers are drowning in vulnerability debt. BlueRock changes the game, enabling organizations to shift from chasing CVEs and exploits to proactively protecting the foundations of applications and computing, so that developers can build great applications without looking over their shoulders. #J-18808-Ljbffr

About JB&B JB&B's dynamic, inclusive, and collaborative culture is driven by our people. Headquartered in Manhattan's Financial District with branch offices in Boston and Philadelphia, our 400 employees are the foundation on which our global reputation for quality and innovative engineering is built. Throughout our history, JB&B's engineers have consistently made their mark on the industry. By leveraging cutting‑edge technologies with sound engineering, JB&B employees create high‑performance building designs that have transformed the skyline, reimagined healthcare, and look to transform the future by spearheading initiatives that contribute to a sustainable, low‑carbon built environment. About the Role We are seeking a Senior Engineer to join our dynamic Electrical team in our Boston office. This role is ideal for a professional with a proficient understanding of electrical design, project execution, and interdisciplinary coordination. For any inquiries about career opportunities at JB&B, please email *************. The Senior Engineer is expected to make a positive impact on the office environment by: Sharing technical knowledge and best practices with colleagues. Acting as a mentor to junior engineers, supporting their professional development. Actively participating in office initiatives, team‑building events, and knowledge‑sharing activities. Key Responsibilities Design Tenant fit‑out projects and complete specific tasks on base building/infrastructure upgrades; assemble riser diagrams, schedules, and floor plans. Plan and coordinate routing of major distribution, main equipment rooms, closets, shafts, and risers. Lead design tasks that support the overall trade system (e.g., branch circuiting, duct work distribution, piping distribution, etc.). Review shop drawings, perform site visits and punch‑lists with limited supervision to verify that designs are being implemented accurately. Understand documentation requirements and develop relevant content for each deliverable phase (e.g., SD, DD, CD and specifications). Understand and implement office procedures related to both design (archiving drawings, filing drawings and forms, etc.) and construction administration (updating shop drawing log, updating RFI log, etc.). Benefits Hybrid workplace offering the flexibility to work both from home and the office. Comprehensive benefits package including 401(k) employer match and stock options. Paid time off (PTO), volunteer program and employee resource groups. Training and professional development courses through JB&B University. Estimated Compensation $85,000-$93,000 annual salary. Equal Opportunity Employer Jaros, Baum & Bolles is an equal opportunity employer. All qualified candidates will receive consideration for employment without regard to race, ethnicity, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, military veteran status, unemployment status, or any other status protected by law. #J-18808-Ljbffr

is in Tewksbury, MA - No Recruiters Please Salary range is commensurate with experience 80,000 - 120,000+ A leading process engineering and construction company, with a long history of executing customized design/build projects, is seeking an Electrical Designer/Mid-Level Electrical Engineer with 0 to 10 years of experience and a background in facility/building design. The successful candidate will have the knowledge and experience to support the in-house engineering team for the design and construction of complex process-facility projects. Projects include new design and construction of manufacturing plants and facilities, and rehabilitation of existing plants/facilities and other high-hazard environments. The Electrical Designer/Mid-Level Electrical Engineer will work closely with senior staff to complete engineering activities to support project execution by coordinating with clients, internal engineering team, internal resources, external vendors, contractors and other critical personnel. This is a great opportunity to work closely with a team of talented, high-caliber engineers. We need a designer or engineer with hands on experience who is able to effectively manage their time and complete tasks on their own. The successful candidate should be comfortable with shifting priorities and comfortable with challenging deadlines, as well as managing the activities of several concurrent projects. You will be working with a 2-3 person Electrical Department on various facility designs. Industries include, but are not limited to: Pharmaceutical Chemical Manufacturing Food Processing Offices/Labs (usually as part of an overall facility) General Manufacturing/Warehousing Expected responsibilities include, but are not limited to: Writing specifications (pulled from a generic library and tailored to specific project needs). Performing load calculations. Creating electrical drawings for power, lighting, tel/data, security, and others. Familiarity with AutoCAD and/or Revit is preferred. Maintaining panel schedules for each branch circuit used. Performing lighting calculations. Laying out devices on a background. Selecting various components (make and model) to use. Will involve internet research and documentation. Travel to jobsites to verify or record information at various stages of projects. Good communication skills are a must as you will be working with contractors, engineers, clients, and construction personnel. Must have good organizational skills and willingness to learn.

(Utility, Substation & Renewable EPC Focus) Pay: $140,000 - $160,000 Base + Discretionary Bonus A national electrical EPC contractor is seeking a Director of Estimating to lead and scale its estimating and preconstruction organization supporting utility-scale renewable energy, substation, and underground electrical infrastructure projects across the U.S. This is a hands-on senior leadership role responsible for estimating strategy, execution, bid positioning, client engagement, and team development. You will oversee estimating operations for projects ranging from $5MM-$50MM+, with a strong emphasis on Solar, BESS, and Substation work ** If you have not owned bid strategy, led teams, or worked in utility-scale electrical construction, this role is not a fit. ** MUST-HAVES 10+ years estimating / preconstruction 5+ years leading estimating teams Electrical utility EPC projects $5MM-$50MM+ Renewable (Solar/BESS) & Substation experience Proven Estimating Department leadership WHAT YOU'LL OWN Lead and scale the Estimating Department (people, process, systems) Drive winning bid strategies aligned with growth goals Oversee estimates, constructability, risk, and value engineering Partner with Operations, Engineering, Procurement, and BD Lead proposals, client presentations, and bid handoffs Mentor and develop high-performing estimators TECHNICAL BACKGROUND Electrical utility & renewable EPC construction Solar, BESS, and Substation estimating Primavera, Bluebeam, MC2 / ICE (or equivalent) BENEFITS INCLUDE BUT NOT LIMITED TO: Strong benefits package including 401(k) with match, authority to build and lead a high-impact estimating organization, exposure to large-scale renewable and utility infrastructure projects, long-term leadership opportunity with a stable national EPC contractor

A leading construction management firm in Boston is seeking an experienced electrical engineer to design and coordinate electrical systems for various projects. The ideal candidate will have over 10 years of experience, a Bachelor's degree in electrical engineering, and proficiency in CAD software. This role involves collaboration, technical problem-solving, and ensuring compliance with regulations while managing project budgets. #J-18808-Ljbffr

At Klaviyo, we value the unique backgrounds, experiences and perspectives each Klaviyo (we call ourselves Klaviyos) brings to our workplace each and every day. We believe everyone deserves a fair shot at success and appreciate the experiences each person brings beyond the traditional job requirements. If you're a close but not exact match with the description, we hope you'll still consider applying. Want to learn more about life at Klaviyo? Visit careers.klaviyo.com to see how we empower creators to own their own destiny. Be Klaviyo's senior IC for scale, you will report into a VP of Engineering and lead performance, reliability, multi‑region, and large‑tenant readiness. You'll drive platform‑wide architectural change, hunt bottlenecks and optimize systems, and partner across teams to productionize improvements. Given that this is an IC role with no direct reports; you will lead via technical depth, hands‑on impact, and crisp cross‑org alignment. What You'll Do Define enterprise scalability fitness functions (latency/throughput/error rates) and a scorecard; align teams to SLOs and budgets. Design/implement sharding and partitioning strategies, caching/back‑pressure, multi‑region readiness, and high‑volume migration paths. Build lightweight enablement: benchmarks, profiling harnesses, reproducible testbeds; pair with teams to land fixes. Lead scalability reviews and readiness gates that accelerate-not block-delivery; drive incident deep dives tied to systemic fixes. Communicate clearly to execs and engineers, tying technical work to business impact and customer outcomes. Integrate AI into scale and resiliency work-from proactive anomaly detection to synthetic load and guided runbooks-so performance improvements stick and incidents don't repeat. Who You Are Experience: 12+ years scaling multi‑tenant SaaS with a reputation for removing major bottlenecks and proving impact with data. Technical expertise: Performance engineering, capacity planning, sharding/partitioning, caching/back‑pressure, multi‑region readiness, and high‑volume migrations; you turn hotspots into robust patterns. AI tools & automation: You apply AI to scale work-profiling assistance, workload modeling, synthetic traffic generation, anomaly detection, and runbook copilots-always with explicit guardrails and observability. Cross‑org influence: You align teams through fitness functions, scorecards, and readiness gates that accelerate-not block-delivery; you communicate tradeoffs crisply to execs and engineers. AI fluency: Curious, adaptable, and proactive in exploring AI that responsibly improves scale outcomes. Nice to Haves Scale scorecard: Company‑wide fitness functions (latency/throughput/error rates) are adopted and reviewed regularly. High‑impact wins: 2-3 bottlenecks removed with documented, reproducible testbeds; pXX latencies and error rates improve on top enterprise workloads; repeat P0s trend down. AI‑assisted scale engineering: AI‑driven anomaly detection reduces alert noise while improving signal; generative load testing and copilot runbooks are used in release/readiness checks for the top critical services; time‑to‑isolate regressions drops 20-30%. Success in 6-12 Months Company‑wide scale scorecard in place; 2-3 high‑impact bottlenecks removed; top enterprise workloads show improved pXX latencies and error rates; fewer repeat P0s. We use Covey as part of our hiring and / or promotional process. For jobs or candidates in NYC, certain features may qualify it as an AEDT. As part of the evaluation process we provide Covey with job requirements and candidate submitted applications. We began using Covey Scout for Inbound on April 3, 2025. Please see the independent bias audit report covering our use of Covey here Massachusetts Applicants: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Get to Know Klaviyo Base Pay Range For US Locations: $248,000 - $372,000 USD We're Klaviyo (pronounced-vee-oh). We empower creators to own their destiny by making first‑party data accessible and actionable like never before. We see limitless potential for the technology we're developing to nurture personalized experiences in ecommerce and beyond. To reach our goals, we need our own crew of remarkable creators-ambitious and collaborative teammates who stay focused on our north star: delighting our customers. If you're ready to do the best work of your career, where you'll be welcomed as your whole self from day one and supported with generous benefits, we hope you'll join us. AI fluency at Klaviyo includes responsible use of AI (including privacy, security, bias awareness, and human‑in‑the‑loop). We provide accommodations as needed. Klaviyo is committed to a policy of equal opportunity and non‑discrimination. We do not discriminate on the basis of race, ethnicity, citizenship, national origin, color, religion or religious creed, age, sex (including pregnancy), gender identity, sexual orientation, physical or mental disability, veteran or active military status, marital status, criminal record, genetics, retaliation, sexual harassment or any other characteristic protected by applicable law. IMPORTANT NOTICE: Our company takes the security and privacy of job applicants very seriously. We will never ask for payment, bank details, or personal financial information as part of the application process. All our legitimate job postings can be found on our official career site. Please be cautious of job offers that come from non‑company email addresses (@klaviyo.com), instant messaging platforms, or unsolicited calls. By clicking "Submit Application" you consent to Klaviyo processing your Personal Data in accordance with our Job Applicant Privacy Notice. If you do not wish for Klaviyo to process your Personal Data, please do not submit an application. You can find our Job Applicant Privacy Notice here and here (FR). #J-18808-Ljbffr

About the Role: We're seeking a Sr. Electrical Designer with 5+ years of experience to support the design and documentation of electrical systems for commercial, industrial, and institutional projects. This role offers growth opportunities within a collaborative engineering team. Responsibilities: Design power distribution, lighting, fire alarm, and low-voltage systems Develop construction documents using AutoCAD and Revit Perform load calculations, circuiting, and equipment layouts Coordinate with internal disciplines and external consultants Assist with code compliance and project specifications Support field investigations and site surveys Requirements: Associate's or Bachelor's degree in Electrical Engineering or related field 5+ years of experience in electrical design for building systems Proficiency in AutoCAD and Revit Familiarity with NEC and other applicable codes Strong communication and organizational skills What We Offer: Supportive, team-oriented work environment Opportunities for advancement and professional development Competitive compensation and benefits

A leading biotechnology company in Boston is seeking an experienced Principal Software Engineer to lead the development of a cutting-edge AI platform for drug discovery. Candidates should have extensive full-stack expertise, strong front-end experience, and a passion for combining technology and science. This role offers a unique opportunity to influence AI-driven innovations in medicine. A competitive salary and relocation benefits are provided. #J-18808-Ljbffr

FM Approvals is an international leader in third-party testing and certification services. We test property loss prevention products and services-for use in commercial and industrial facilities-to verify they meet rigorous loss prevention standards of quality, technical integrity and performance. How? By employing a worldwide certification process that's backed by scientific research and testing, and over a century of experience. The FM APPROVED mark is recognized and respected worldwide. Our certification instills confidence and commands respect in your marketplace. This position you will plan, conduct and direct the evaluation and certification of property loss prevention products, with little or no supervision, in the area of building materials and assemblies. The testing will push the product's performance as it relates to wind, fire and other exposures in our world class, state of the art laboratories. You will help to increase the technical knowledge and provide solutions to the problems of property loss prevention and mitigation. Duties will include, but are not limited to, the development of proposals, project management, supervision of tests, documentation of results, preparation of written reports and other complex tasks associated with third party product certification. In addition, duties may include making presentations and providing representation to trade associations. The working environment includes both the office and laboratory. Overnight travel, to consult with customers, attend technical conferences and to conduct and monitor tests at test facilities, is typically less than 20%. Role can be based at FM's Engineering and Research facility in Norwood, MA, or our Research Campus located in West Glocester, RI. BS in technical area + 5 years' experience or MS in technical area. Technical degree in civil, structural or mechanical engineering preferred. Knowledge of, and experience with, building materials, components, and roofing assemblies is desired. A background in structural engineering, steel decking for roofs, statics and/or material properties is beneficial. Successful candidate should have demonstrated project management skills, results analysis skills, superior written and verbal communication skills and computer proficiency with programs such as Word, Excel and Outlook. Professional registration and / or knowledge of FM Property Loss Prevention Datasheets is beneficial. Knowledge of FM Approvals Standards is preferred. Candidate must have the ability to read, write and speak English proficiently and the ability to understand and follow English instructions. Candidate must possess outstanding relationship management skills including: Exceptional customer service skills Excellent communication skills (both orally and in writing) Active listening skills to understand the points being made when someone else is speaking and giving full attention to the speaker Effective speaking skills to convey direction, information and technical concepts Ability to work effectively as a strong and supportive member of a team Demonstrated skill in organizing work, setting priorities and planning Working product evaluation environment involves fire, smoke, heat and the use of adhesives and binders. The final salary offer will vary based on geographic location, individual education, skills, and experience. The position is eligible to participate in FM's comprehensive Total Rewards program that includes an incentive plan, generous health and well-being programs, a 401(k) and pension plan, career development opportunities, tuition reimbursement, flexible work, time off allowances and much more. FM Approvals is an Equal Opportunity Employer and is committed to attracting, developing, and retaining a diverse workforce. #LI-TA1

At Johnson & Johnson, we believe health is everything. Our strength in healthcare innovation empowers us to build a world where complex diseases are prevented, treated, and cured, where treatments are smarter and less invasive, and solutions are personal. Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity. Learn more at ******************* Job Function: Supply Chain Engineering Job Sub Function: Manufacturing Engineering Job Category: Scientific/Technology All Job Posting Locations: Danvers, Massachusetts, United States of America Job Description: About Cardiovascular Fueled by innovation at the intersection of biology and technology, we're developing the next generation of smarter, less invasive, more personalized treatments. Are you passionate about improving and expanding the possibilities of Cardiovascular? Ready to join a team that's reimagining how we heal? Our Cardiovascular team develops leading solutions for heart recovery, electrophysiology, and stroke. You will join a proud heritage of continually elevating standards of care for stroke, heart failure and atrial fibrillation (AFib) patients. Your unique talents will help patients on their journey to wellness. Learn more at *******************/medtech We are searching for the best talent for Sr. Electronics Production Engineer Purpose: This role will drive the scale-up and production of a complex electro-mechanical medical device used in life-saving cardiac support therapies. This role will own scale-up activities, validations, root-cause investigations, safety and regulatory compliance, and continuous process improvement with a focus on cost savings and robust, repeatable manufacturing processes. You will be responsible for: Scale-Up & Design Transfer Lead scale-up from pilot to full-scale production, including process development, equipment qualification, line layout, and work instructions. Collaborate with R&D and Quality to ensure smooth design transfers and robust manufacturing readiness. Validation & Verification Plan and execute IQ/OQ/PQ activities for equipment, processes, and software where applicable. Develop and approve validation protocols and reports; ensure traceability to user needs and regulatory requirements. Root Cause Investigation & CAPA Lead root-cause analysis for yield loss, quality escapes, and process deviations using structured problem-solving methods. Implement corrective and preventive actions (CAPA), verify effectiveness, and close with data-driven evidence. Safety & Regulatory Compliance Ensure manufacturing activities comply with EHS standards and device safety requirements. Maintain alignment with regulatory expectations (e.g., FDA QSR/21 CFR Part 820, ISO 13485) and support regulatory submissions as needed. Process Improvement & Cost Savings Identify and execute Lean/Six Sigma projects to improve throughput, reduce cycle times, increase yield, and lower cost per unit. Apply statistical methods (DOE, SPC, MSA, Cp/Cpk analysis) to optimize processes and sustain gains. Quality Systems & Documentation Maintain and improve documentation: SOPs, work instructions, MBR/Device History Records, change controls, and validation artifacts. Develop and manage PFMEA, Control Plans, and ongoing quality checks to ensure product reliability. Production Support Provide hands-on troubleshooting on the manufacturing floor; drive standard work, line balancing, and equipment optimization. Monitor key production metrics and implement actions to meet targets for quality, cost, and schedule. Cross-Functional Collaboration Partner with Quality, Regulatory, Supply Chain, Manufacturing, and R&D to align on program milestones, risk, and resource needs. Mentor and coach junior engineers and technicians; contribute to a culture of continuous improvement. Qualifications / Requirements: Bachelor's degree in Engineering (Electrical, Mechanical, Biomedical, Industrial, or related). Master's degree strongly preferred. 6-10+ years of manufacturing engineering experience in electronics or medical devices (device hardware, electronics assembly, or related fields). Working knowledge of FDA QSR/21 CFR Part 820 and ISO 13485. Experience supporting or leading design transfers, validation activities, and quality systems in a regulated environment. Proficient in DOE/DOE-based experiments, statistical process control (SPC), capability analyses (Cp/Cpk), MSA, and root-cause analysis methodologies. Experience with process validation (IQ/OQ/PQ) and risk-based approaches to manufacturing. Familiarity with PCB/SMT assembly, soldering, testing, electronics packaging, and related manufacturing processes. Experience with change control, CAPA, PFMEA, control plans, and documentation management. Excellent problem-solving, communication, and project-management skills. Ability to work cross-functionally, influence without authority, and manage multiple priorities in a fast-paced environment. Johnson & Johnson is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status or other characteristics protected by federal, state or local law. We actively seek qualified candidates who are protected veterans and individuals with disabilities as defined under VEVRAA and Section 503 of the Rehabilitation Act. Johnson & Johnson is committed to providing an interview process that is inclusive of our applicants' needs. If you are an individual with a disability and would like to request an accommodation, external applicants please contact us via *******************/contact-us/careers , internal employees contact AskGS to be directed to your accommodation resource. #LIOnsite Required Skills: Preferred Skills: Accelerating, Coaching, Critical Thinking, Facility Management, Good Manufacturing Practices (GMP), Lean Manufacturing Principles, Lean Supply Chain Management, Manufacturing Engineering, Performance Measurement, Product Design, Program Management, Project Engineering, Project Schedule, Risk Compliance, Robotic Automation, Safety-Oriented, Science, Technology, Engineering, and Math (STEM) Application, Technologically Savvy The anticipated base pay range for this position is : $94,000.00 - $151,800.00 Additional Description for Pay Transparency: $91,000 - $147,200 This position is eligible to participate in the Company's long-term incentive program. Subject to the terms of their respective policies and date of hire, employees are eligible for the following time off benefits: Vacation -120 hours per calendar year Sick time - 40 hours per calendar year; for employees who reside in the State of Colorado -48 hours per calendar year; for employees who reside in the State of Washington -56 hours per calendar year Holiday pay, including Floating Holidays -13 days per calendar year Work, Personal and Family Time - up to 40 hours per calendar year Parental Leave - 480 hours within one year of the birth/adoption/foster care of a child Bereavement Leave - 240 hours for an immediate family member: 40 hours for an extended family member per calendar year Caregiver Leave - 80 hours in a 52-week rolling period10 days Volunteer Leave - 32 hours per calendar year Military Spouse Time-Off - 80 hours per calendar year Please use the following language: For additional general information on Company benefits, please go to: - *********************************************

Job Description About GrapheneDx: GrapheneDx is a new diagnostics technology company with a mission to transform consumer diagnostics. Our employees gain experience in a multidisciplinary, fast-paced start-up and have ample opportunities to acquire new skills, engage with emerging technologies, and collaborate closely with an accomplished team, all within in a supportive and energetic environment. GrapheneDx offers a competitive compensation package including base salary, performance bonuses, paid time off, health and dental benefits, and excellent growth opportunities. GrapheneDx is seeking a Senior Electronics Engineer who will apply their expertise to support the development of their first generation product and own all electronics-based activities within the business. Position Summary: The ideal candidate for this role will act as technical lead for all internal electronics engineering development work in all key R&D Product development activities, to bring products to market that meets startup product development strategy and deliver impactful diagnostic products globally. The candidate will work collaboratively with the Program, R&D, Fabrication and Quality teams to lead and support all electronics product design and development activities within the company and with company partners. Roles and Responsibilities: Lead the development engineering activities on current and future generation electronics subsystems and their integration into startup products: Responsible for concepting, creating and testing prototypes for proof of concept to take that learning back into design iterations Responsible for developing electrical sensing platforms to support Assay development in accelerating electrical-based biosensor development Provide data analysis on product designs and throughout testing to iteratively improve product performance to meet product requirements Act as technical decision maker for the electronics subsystem Own and contribute to product development documentation within our Quality Management System: Manage electronics product requirements and specifications in collaboration with the Engineering and Quality teams Generate design files and detailed specifications that are transferred to manufacture Provide technical expertise in development of risk management documents including dFMEA, pFMEA, and Risk Analyses, and create and implement mitigation plans based on risk analysis outputs Implement documented testing to meet product Verification and Validation (V&V) requirements In collaboration with manufacturing and design partners: Assess the design for manufacturability and implement solutions to ensure product design meets short term manufacturability requirements and long-term scale needs Support in translating new product requirements to manufacturing requirements Contribute to cross-functional meetings and technical reviews as the Electronics Subject Matter Expect Supervise and mentor junior staff as applicable Contribute to continuous improvement activities to further enhance operational efficiency Manage relationships with critical suppliers, in partnership with Quality and Supply chain groups Contribute to startup product development roadmap and technology portfolio Qualifications: Bachelor's or Master's degree in Electronics engineering with 7+ years' applicable industry experience, or a PhD with 5+ years of applicable industry experience Strong skills in electronics product development including: Proficiency with PCB visualization and layout tools e.g. Altium Familiarity with low and high volume manufacturing techniques and suppliers Development of low cost, single use disposable PCBAs Development of electrical sensing platforms Embedded Software development e.g. C Familiarity working in the Medical Device, In-Vitro Diagnostics or Consumer Health sectors, and compliance with ISO13485/ISO9001 Working under design control for regulated products e.g, medical devices, including requirements management, risk management, and V&V Experience in low & high-volume manufacturing Strong data processing and visualization skills (Python, MATLAB, R, or equivalent) Strong background in signal processing, developing mathematical frameworks and algorithms to classify diagnostic results from complex signals Strong cross-functional problem-solving skills, with the ability to identify challenges and propose alternative approaches Ability to coordinate effectively across multiple functional areas Highly motivated and adaptable, with the flexibility to thrive in a dynamic and interdependent environment Preferred Qualifications: SolidWorks 3D CAD design experience Experience developing electrochemical and electrical-based biosensors Experience in designing for high-volume manufacture Database management for rapid data collection and processing (e.g. MongoDB)