Electronics technician jobs in North Kingstown, RI

Job SummaryRDSI has a planned opening for an entry-to-mid level Electronic Technician in their Pawcatuck, CT location. The successful candidate will initially produce the lighting kits and light assemblies, along with associated parts management support, and longer term provide technical support for development and legacy Navy communication systems, Electronic Warfare, and Bridge Light programs. Responsibilities Fabricate parts Assemble products and sub-assemblies Manage parts inventory Review schematic diagrams Able to handle multiple tasks concurrently Troubleshoot and repair circuit boards and electronics Perform electrical analysis and testing Support testing of communications and antenna systems Qualifications Able to read and comprehend wiring diagrams and schematics Solder proficiently Install wiring and connectors Familiar with Navy Systems Requirements Associates degree in technical field or equivalent Must be familiar in the use of Microsoft Office Outlook, Word, Excel and Power Point Good oral and written skills Must possess good interpersonal skills The candidate must be a self-starter and be able to work independently with a minimum of supervision Familiarity with LabView software a plus Familiarity with Fibre installation a plus Must have or be eligible for a Secret Clearance Applicants selected will be subject to a security investigation and must meet eligibility requirements for access to classified information.RDSI is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

TSC is seeking an entry level Elecrtomechanical Technician with experience or interest in cable assemblies, electronic components, and precision mechanical work to support work in our Plymouth, MA location. The ideal candidate is hands-on, detail-oriented, and knowledgeable about manufacturing best practices within an ISO9000-compliant environment. Key Responsibilities Manufacture and assemble electronic assemblies, including: Soldering (surface-mount and through-hole) Crimping a wide range of terminals and connectors Heat-shrink applications and harness routing Work with printed wiring assemblies (PWAs) and printed circuit boards (PCBs), including component installation, inspection, and rework. Fabricate and modify sheet metal components using shop tools. Operate machinery such as but not limited to: drill press, precision hand tools, measurement and inspection equipment (calipers, micrometers, torque tools), torque fasteners and mechanical assemblies to specified values using calibrated tools. Follow all manufacturing best practices, workmanship standards, and engineering documentation (schematics, drawings, work instructions, travelers). Ensure work adheres to ISO9000 quality management procedures. Conduct in-process inspections and maintain accurate production records. Collaborate with engineering, quality, and production teams to support continuous improvements. Required Qualifications 1-2 years of experience in a manufacturing or an electronics assembly role (or equivalent hands-on background) US Citizenship and the ability to obtain and maintain a government security clearance. Proficiency in electrical cable assembly and soldering (IPC-620 or IPC-610 certification is a plus), crimping and use of manual/automated crimp tools Efficient in PCB handling and ESD-safe work practices Strong mechanical aptitude and ability to read engineering drawings. Understanding of ISO9000 or similar quality standards. Ability to work independently, manage multiple tasks, and meet production deadlines. Strong attention to detail, quality, and safety. TSC Benefits: TSC offers a stable work environment, a competitive salary, and a comprehensive benefit package; including Employee Stock Option Plan (ESOP) participation, 401k Plan, Flexible Work Schedules, Tuition Reimbursement, Co-Sponsored Health Plan, Paid Leave and much more. TSC is a growing organization with unlimited opportunity! Applying to TSC: Only those candidates invited for an interview will be contacted. Employment at TSC is contingent upon the successful completion of a comprehensive background check, security investigation, and a drug screening. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Electronics Technician KiddeFenwal, LLC KiddeFenwal is the global market leader in designing and manufacturing innovative industrial and commercial fire suppression systems and safety controls. Our proprietary, fully certified offerings save lives, protect property, and minimize business interruption. Our brands-Kidde Fire Systems and Kidde Fire Protection-deliver highly engineered fire suppression, detection, and control systems across industrial, commercial, and marine sectors. Fenwal Controls supports OEMs with gas ignition, temperature control, and overheat detection products. Headquartered in Ashland, Massachusetts, KiddeFenwal operates globally, with facilities in the U.S., United Kingdom (KFI-UK), and India (KTI-India). Learn more at ******************* Our Purpose We protect lives, livelihoods, and iconic assets through innovative solutions, strong partnerships, and exceptional customer experiences. Built on a foundation of integrity and safety, we drive results with speed and excellence while fostering innovation and teamwork. Position Summary The key responsibilities include Work under limited supervision to provide technical support and task ownership to electrical engineers on a variety of engineering tasks. Execution of functional and environmental testing of electronic boards/control panel and associated equipment. Perform fault isolation testing on systems and equipment and assist engineers in determining methods or actions to remedy malfunctions. Perform soldering, wiring, fixture setup as required. Work with regulatory engineers for lab qualification program for regulatory agency testing Documentation of results and tracking of units under test (UUTs) using internally developed practices and procedures. Maintain inventory of piece parts that support the delivery of rapid prototypes. Collaborate with colleagues to maintain and manage inventory of key electronic equipment and assemblies. Participate in team meetings, providing accurate status, raising issues and risks. Actively participate in, and maintain strict compliance to, all company Policies and Procedures. All other duties as assigned This position reports to the Sr. Engineering Manager and involves collaboration with engineering teams. Experience and Competencies Experience with execution of functional and environmental testing of electronic devices. Hands-on experience with component-level troubleshooting of analog and digital circuits. Proficient in use and operation of electronic lab tools/equipment such as oscilloscopes, power meters, frequency counters, multimeters, temperature/environmental chambers, and spectrum analyzers. Experience documenting test procedures and communicating results to internal customers and regulatory agencies for product certification Able to read and interpret engineering drawings, electrical schematics, test data, test procedures and specifications Able to maintain and update equipment calibration records, test setup details, test records for agency review Able to quickly adjust to shifting priorities, perform and deliver in a fast-paced environment Self-motivated team-oriented individual who has the ability to work efficiently and safely in a laboratory environment with clear direction and minimal supervision Basic Qualifications Min. AA/AS degree (or other 2-year post high school training) Min. 3 years of relevant experience Preferred Qualifications/Competencies Experience documenting test procedures and communicating results to internal customers. Experience in understanding/developing programming / test fixtures Solid written and verbal communication skills Proficient in use of Microsoft Word, Outlook, and Excel software. Experience with test facility and equipment maintenance and management. Experience with use of Data Acquisition Equipment, i.e. National Instruments Lab View. Familiarity with C programming language and PIC family of microprocessors. Experience working with non-US based teams and suppliers. Sensitivity to cultural biases and understanding the communication practices needed to create successful partnerships in and open and supportive environment. KiddeFenwal, LLC. is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other federally protected class.

Site: Brigham and Women's Faulkner Hospital, Inc. Mass General Brigham relies on a wide range of professionals, including doctors, nurses, business people, tech experts, researchers, and systems analysts to advance our mission. As a not-for-profit, we support patient care, research, teaching, and community service, striving to provide exceptional care. We believe that high-performing teams drive groundbreaking medical discoveries and invite all applicants to join us and experience what it means to be part of Mass General Brigham. Shift: Monday to Friday 11am to 7:30pm Job Summary Grade 125 Summary: Responsible and accountable for establishing, maintaining, and coordinating the appropriate inventory of equipment utilized by surgical services. The equipment technician works in collaboration with the Nurse in Charge / Throughput manager / Operations Manager/Nursing Director/ Biomed in managing the day-to-day activities as determined by the operating room schedule. The equipment technician functions as a member of the Perioperative Team who has specific knowledge, skills and training to work in an Operating Room Environment while assisting with patient care and directly reports to the Operations Manager. Does this position require Patient Care? Yes Essential Functions -Collaborates with the surgical team, under the direct supervision of the Operations Manager (during patient care) to assure all equipment is available/ready for surgical procedures. -Develops and maintains an inventory of equipment with par levels and location for staff/team reference. -Checks OR schedule to assure availability of equipment. Collaborate with Nurse in Charge/Throughput Manager and Operations Manager as appropriate in resolving conflicts. -Day/evening before surgery, set up rooms for following day with necessary equipment for the first cases of the next day. -Able to access Epic for preference card review for equipment and positioning needs. -Uses effective oral and written communication to foster collaboration, teamwork, and mutual respect. -Assists with the day-to-day non-clinical operational issues for perioperative Services. This includes communication with various ancillary services such as Engineering, Biomed, and Telecommunications. Communication must be, at all times, professional and effective to enhance a positive working environment. -Communicates equipment out for repair to team/assures replacement as necessary. -Collaborates with multi-disciplinary teams on new equipment in OR. -Collaborates with Nurse in Charge, Throughput Manager, Operations Manager and biomed on introducing new equipment in the OR. This includes but is not limited to communication to staff and assisting with/coordination of in-services as appropriate. -Works with industry representatives as necessary, assuring hospital policy is followed during visits. -Cares for (set up and breakdown) equipment as appropriate. -Assists with staff education as appropriate. -Assists with patient positioning and turning over rooms as appropriate. -Adheres to hospital mandatory training and testing requirement. -Participates in activities conducive to safety of patients and team members. -Monitors and supports use of aseptic technique according to hospital policy. -Uses interpersonal skill in relationships with other health team members. -Collaborates with Operations Manager to keep unit regulatory ready, demonstrating knowledge of regulatory guidelines and ability to participate in unit quality standards. -Maintains tracking logs for broken equipment. Qualifications Education: High School Diploma or Equivalent required Can this role accept experience in lieu of a degree? No Licenses and Credentials Experience: Three years of operating room experience required or equivalent experience 3-5 years required Computer experience preferred Knowledge, Skills and Abilities - Staff adheres to all I C.A.R.E. Standards. - Able to read, understand, and write English. - Must be able to lift 50lbs. Independently. - Must be able to push stretcher independently with patient weighing up to 250lbs. - Must be aware of proper body mechanics when assisting in patient transfer; equipment moves and lifting of heavy objects. - Must possess interpersonal skills sufficient to interact effectively with other healthcare members. - Must constantly be alert and attentive to progress of O.R. schedule to meet tight deadlines of following cases. - Must be able to stand for long periods of time (up to 6 hours). Additional Job Details (if applicable) Physical Requirements Standing Frequently Walking Frequently Sitting Occasionally Lifting Frequently Carrying Frequently Pushing Occasionally Pulling Occasionally Climbing Rarely Balancing Frequently Stooping Occasionally Kneeling Occasionally Crouching Occasionally Crawling Rarely Reaching Frequently Gross Manipulation (Handling) Frequently Fine Manipulation (Fingering) Frequently Feeling Constantly Foot Use Rarely Vision - Far Constantly Vision - Near Constantly Talking Constantly Hearing Constantly Remote Type Onsite Work Location 1153 Centre Street Scheduled Weekly Hours 40 Employee Type Regular Work Shift Day (United States of America) Pay Range $18.44 - $27.39/Hourly Grade SF1125 At Mass General Brigham, we believe in recognizing and rewarding the unique value each team member brings to our organization. Our approach to determining base pay is comprehensive, and any offer extended will take into account your skills, relevant experience if applicable, education, certifications and other essential factors. The base pay information provided offers an estimate based on the minimum job qualifications; however, it does not encompass all elements contributing to your total compensation package. In addition to competitive base pay, we offer comprehensive benefits, career advancement opportunities, differentials, premiums and bonuses as applicable and recognition programs designed to celebrate your contributions and support your professional growth. We invite you to apply, and our Talent Acquisition team will provide an overview of your potential compensation and benefits package. EEO Statement: Brigham and Women's Faulkner Hospital, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religious creed, national origin, sex, age, gender identity, disability, sexual orientation, military service, genetic information, and/or other status protected under law. We will ensure that all individuals with a disability are provided a reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. To ensure reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Veteran's Readjustment Act of 1974, and Title I of the Americans with Disabilities Act of 1990, applicants who require accommodation in the job application process may contact Human Resources at **************. Mass General Brigham Competency Framework At Mass General Brigham, our competency framework defines what effective leadership “looks like” by specifying which behaviors are most critical for successful performance at each job level. The framework is comprised of ten competencies (half People-Focused, half Performance-Focused) and are defined by observable and measurable skills and behaviors that contribute to workplace effectiveness and career success. These competencies are used to evaluate performance, make hiring decisions, identify development needs, mobilize employees across our system, and establish a strong talent pipeline.

BAS Controls Technician - Providence, RI - $36.00-$52.00/hr - Commercial, Healthcare & Institutional Facilities About the Opportunity A growing Building Automation & HVAC Controls contractor is seeking a skilled BAS Controls Technician to support projects throughout the Providence metro and surrounding Rhode Island region. This role focuses on installing, commissioning, troubleshooting, and servicing modern DDC/BAS systems in commercial, healthcare, university, and municipal facilities. Position Details Title: BAS Controls Technician Location: Providence, RI Employment Type: Full-Time Compensation & Benefits Hourly Rate: $36.00 - $52.00/hr (DOE) Overtime: Regularly Available Vehicle: Company Vehicle or Monthly Allowance Medical, Dental & Vision Insurance 401(k) with Company Match Paid Vacation, Sick Leave & Holidays Technical Training & Certification Support (Niagara, Siemens, JCI, etc.) About the Role The Providence region continues to expand in education, healthcare, biotech research, and public-sector infrastructure. This position offers long-term stability and consistent project demand for experienced BAS professionals. Key Responsibilities Install, configure, and commission BAS/DDC control systems Perform point-to-point verification and functional system testing Troubleshoot control panels, field devices, and network communication issues Assist with programming changes, graphics updates, and logic adjustments Interpret control diagrams, wiring schematics, and sequences of operation Document commissioning results and maintain accurate service records Support mechanical contractors, engineers, and end users during project execution Respond to service calls and provide customer-facing technical support Ideal Candidate Profile Experience working as a BAS Controls Technician or HVAC Controls Specialist Strong troubleshooting ability with BAS/DDC systems Hands-on experience installing, wiring, and commissioning control components Familiarity with Tridium, Honeywell, Siemens, Alerton, or Distech systems Understanding of HVAC equipment (AHUs, boilers, chillers, VAVs, heat pumps) Clear communication and customer service skills Ability to work independently and as part of a field team How to Apply If you have experience in building automation or HVAC controls and are looking for a stable, growth-focused opportunity in the Providence region, please apply through this posting. Qualified candidates will be contacted for further discussion.

We have an exciting opportunity to join us in supporting one of our valued customers as an Electronic Warfare/SIGINT SME supporting United States Special Operations Command (USSOCOM) and Special Operations Forces (SOF). Various Locations: Fort Belvoir, VA; Fort Bragg, NC; Lexington, KY; Fort Eustis, VA; Natick, MA * This position is contingent upon a contract award* Essential Duties: * Assist the SGM and Deputy for TT as the EW SME working in collaboration with government partners, academic laboratories, and private industry - to develop new tools and technology in support of the SOF explosive and mechanical breaching community. * Assist in the preparation and development of new requirements documentation to include Initial Capabilities Documents (ICD), Capabilities Development Documents (CDD), SPECAT messages, Basis of Issue Plans (BOIP), Test Plans, and update Project Folders. * Tasks include the identification and development of Radio Detection and Ranging (RADAR) and Electronic Counter Measures (ECM), Intelligence, Surveillance, and Reconnaissance (ISR), Electronic Warfare (EW), and Signals Intelligence (SIGINT) for further development or fielding in support of SOF. Required Qualifications: * Qualifications include a background in EW, RADAR, ECM, ISR, EW, and SIGINT operations (particularly SOF) with a knowledge of EW techniques, tactics, & procedures. * 12+ years of relevant experience * Excellent communication, technical writing, and presentation skills. * Familiarity with DoD acquisition lifecycle and rapid prototyping processes. * Prior experience supporting USSOCOM, SOF AT&L, or other SOF components. (preferred). Education: Bachelor's or Master's degree in a related field Required Clearance: TS/SCI Travel: TBD Why Join USfalcon? * Mission-Focused Culture - Join a company deeply embedded in supporting defense, aerospace, and federal initiatives. * Career Growth & Development - Access training, mentorship, and advancement opportunities within a growing mid-tier defense contractor. * Trusted Industry Partner - Be part of a company with nearly 30 years of continuous service to DoD and federal clients.

Job Description This position is responsible for testing, aligning, troubleshooting, repairing and modifying circuit boards to obtain specified functionality. Test various circuit board chassis to comply with customer specs. Make repairs down to component level on circuit boards. Make adjustments and calibrations to circuit boards. Modifies functions of circuit boards to conform to specific requirements. Sets up standard test apparatus or test equipment and circuitry to conduct functional and operational tests to evaluate performance and reliability of circuit boards. Analyzes and interprets test data. Adjusts, calibrates, aligns, and modifies circuitry, components and records effects on unit performance. Complete paperwork associated with testing and troubleshooting. Fabricated cables for use with test equipment and circuit boards as needed. Qualifications: Must be able to troubleshoot down to component level. Must have strong skills with volt meters, spectrum analyzers, network analyzers, oscilloscopes, power supplies and signal generators. Strong electronics background especially in the Radio Frequency and digital electronics field. Must be able to read electronics schematics. Good deductive reasoning ability for troubleshooting. Demonstrates ability to be mechanically inclined with soldering skills. Must be open minded to perform all tasks needed. Background in radio communication a plus. Ability to use mechanical tools in the fabrication and assembly of chassis. Will be working under microscopes for long periods of time. Must be a US Citizen. Must pass a background check and drug test.

The Technician Apprentice is responsible for supporting various areas of activity engaged in by field personnel onsite at client locations. Essential Job Functions * Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern * Performs all duties as assigned and adheres to TEAM's Core Values. * Assists Technicians, Sr Technicians, and Operations in various Team service responsibilities onsite at client locations * Assists in providing service and customer support during site assignments * Supports all on site installation, repair, maintenance and evaluation tasks * Assists in diagnosing errors or problems and observes field personnel in determining appropriate solutions * Assists in documentation of all field service activities * Other duties as assigned Job Qualifications * High school diploma or equivalent required * One (1) or more year's previous experience in an industrial or plant environment preferred. * May be required to travel out of town on a periodic basis Work Conditions * Position is based out of a branch or site location * Field duties require indoor and outdoor work in a plant atmosphere * Interaction with other crew employees, as well as supervisors and client personnel * Working in plant and/or shop areas around production machinery with extreme noise levels * Must be able to wear safety equipment as required by the safety department for personal protection * May be at more than one job site in a day and must be able to tolerate climate changes Physical and Mental Requirements * Ability to lift and carry 75 pounds * Must be able to walk and climb except when performing non-field duties * Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively * Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties * Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations * Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells

At REGENT, we're on a mission to revolutionize regional transportation between coastal cities. We're not just building vehicles, we're creating a new category of transportation: the seaglider. These groundbreaking wing-in-ground-effect craft travel just above the water's surface, combining the speed of an airplane with the low operating costs of a boat. Capable of 180 miles at 180 mph on today's battery tech (and up to 400 miles with next-gen batteries), seagliders will unlock fast, affordable, and sustainable coastal transit for passengers and cargo - connecting cities, islands, and communities like never before. Backed by leading investors and powered by a team of passionate, forward-thinking engineers, builders, and operators, we're now scaling from a breakthrough prototype to full production - and building the team to make it happen. Role Overview We're looking for a mission-driven Electromechanical Technician to help bring REGENT's groundbreaking seagliders to life. In this role, you won't just assemble parts - you'll be building the future of coastal mobility by integrating and testing the critical systems that will make our vehicles fly just above the waves. This is an opportunity for a hands-on builder with a deep understanding of both mechanical and electrical systems to contribute to something truly transformative. If you've worked in aerospace, marine, robotics, or complex R&D environments and are energized by solving real-world problems with hardware, we'd be thrilled to have you on the team! If you're energized by working at the intersection of cutting-edge innovation, real-world impact, and hands-on engineering, you'll be in the right place - and we'd be thrilled to have you on the team! What You'll Do * Assemble, install, and test integrated systems including motors, actuators, sensors, wire harnesses, control surfaces, and other electromechanical assemblies. * Fabricate and route harnesses from schematics and 3D models, using crimping, soldering, and strain relief techniques to aerospace standards (e.g., IPC/WHMA-A-620). * Troubleshoot system-level issues involving electrical, mechanical, or sensor components-identify root causes and propose solutions in collaboration with engineers. * Read and interpret both electrical schematics and mechanical assembly drawings to support builds and integration. * Install and calibrate moving systems, such as control surfaces, propulsion assemblies, or actuation systems, ensuring smooth mechanical operation and proper electrical interfacing. * Support testing and validation of complete vehicle systems - both on the bench and integrated into seaglider platforms. * Collaborate across disciplines (e.g., mechanical, electrical, avionics, and systems engineering) to rapidly iterate and improve design and build processes. * Contribute to tooling, workspace setup, and safety practices, including safe handling of high-voltage systems and moving machinery. What You'll Bring * Demonstrated experience building and supporting electromechanical systems - including actuators, sensors, motors, wiring, and control interfaces. * Proficiency in using both mechanical and electrical hand tools, diagnostic instruments (multimeters, torque wrenches, etc.), and assembly techniques. * Familiarity with aviation, aerospace, or high-reliability standards for assembly, harnessing, and workmanship (e.g., IPC-A-610, IPC/WHMA-A-620, or equivalent). * Ability to read and follow electrical schematics, wiring diagrams, and mechanical assembly drawings. * Understanding of safe work practices around high-voltage systems, rotating machinery, and prototype environments. * A collaborative mindset and the ability to adapt in a fast-paced prototyping environment. Bonus Experience * Experience in aerospace, marine, robotics, or advanced manufacturing environments. * Worked on systems involving high-voltage power, battery modules, or energy storage (Li-Ion or Li-Polymer). * Familiarity with motor control systems, linear actuators, servos, or propulsion subsystems. * Exposure to prototyping or R&D test environments, with rapid iteration cycles and hands-on debugging. * Worked with CAD or electrical design software (e.g., Siemens NX, Capital, or Altium) for layout or harness routing. * Experience operating or maintaining marine craft, UAVs, or small aircraft. Who We're Looking For * Collaborative Team Player: You believe that great things happen when teams work together. You communicate effectively and collaborate with engineers, stakeholders, and other cross-functional teams to align on goals and move projects forward. You bring people together, ensuring that everyone is on the same page and moving towards a shared vision. * Creative Problem Solver: You thrive on tackling complex challenges and finding innovative solutions. Whether you're resolving installation challenges, debugging elusive electrical issues, or adapting on the fly during integration and test, you bring a practical, inventive mindset to every problem. You don't just patch issues - you improve processes, anticipate downstream impacts, and help turn one-off fixes into scalable solutions that raise the bar for future builds. * Adaptable & Agile: In a fast-paced, ever-evolving startup environment, you quickly adapt to changing priorities and requirements. You approach challenges with a calm, resilient mindset, and know how to pivot and adjust your approach as needed, ensuring that progress continues without missing a beat. * Innovative Mindset: You're driven by curiosity and a passion for technology. You're passionate about driving continuous improvement, embracing new technologies and methodologies to enhance efficiency, quality, and team performance. What We Offer * Competitive compensation including a robust equity incentive plan. * Comprehensive health, dental, and vision insurance - we cover 100% of your premiums. * 401(k) with company matching, so you can plan for the future. * 10 days of paid time off and company-wide holiday breaks. * Relocation packages available for those moving to join our team. * Daily, free catered lunches * Learning & professional development opportunities If you're ready to take on an exciting challenge, grow with us, and make a lasting impact, we want to hear from you. Even if you don't meet every requirement, but you see yourself contributing to our mission, we encourage you to apply! We value diverse skillsets and experiences and believe in the potential of passionate individuals to make a big impact. Equal Opportunity Employer REGENT is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive work environment. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, disability, or any other characteristic protected by law.

Schedule: Thursday, Friday, Saturday, Sunday, Monday - 6:00am to 2:30pm Pay Range: $34-38/hr, depnding on overall skills and experience OVERVIEW OF ROLE: The Electromechanical Technician will be responsible for carrying out assembly, maintenance, and troubleshooting of control systems infrastructure and equipment. They will be responsible for both low-voltage control wiring and higher-voltage power wiring and will work on a variety of internally developed and third-party systems and machines. They will work closely with Controls Engineers and Maintenance Mechanics on the Manufacturing team, as well as both technicians and engineers from a variety of adjacent working groups. for all in-plant automation devices such as Allen Bradley PLC's, HMI's and VFD's.. The Electromechanical Technician will assist in accurate data collection for MES, Kepware and SCADA systems. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform maintenance (corrective, preventive, predictive, routine, and troubleshooting) on instrumentation systems and components in a safe, efficient, and compliant manner. Wire, test, and troubleshoot control panels and individual electrical subcomponents. Assemble control systems infrastructure and install third-party equipment such as power meters, pumps, pressure sensors and the like. Read and mark-up electrical schematics. Assist with maintaining all equipment programs database. Follow company and industry workmanship standards for assembly and electrical work. Follow Lock-Out Tag-Out (LOTO) procedures as-needed. Set up and troubleshoot simple ethernet communications networks. performing routine and emergency maintenance of the facility's industrial electrical and control systems and equipment. Recommend component replacement or upgrades when items become obsolete or are at end of life. Assist in maintaining building SCADA systems to ensure all are functioning as designed. Continuously improve the reliability of current systems Ability to effectively communicate with co-workers and take direction from others. Ability to work in a fast-paced environment, with multiple and changing priorities while maintaining strong attention to detail and a high level of accuracy. Other job duties as assigned EDUCATION AND/OR EXPERIENCE: 2 - 4 years of relevant experience Familiarity with the basic concepts of PLCs, HMIs, SCADA systems, and networking Familiarity with cGMP/GMP. Strong understanding of automated manufacturing equipment and programming required. Knowledge of proper wiring and cabling standards and techniques (Clean termination, ferruling, grounding & bonding, strain relief, etc.) Proven experience with troubleshooting equipment problems and performing complex system tests required. Rockwell certification preferred. Proficient in MS Word, Excel, PowerPoint required. Experience with databases, process monitoring systems and MES (manufacturing execution system) / information systems. Valid Massachusetts Driver's License required. Know the proper use of hand and power tools. Experience in a food processing & manufacturing environment is a plus. PHYSICAL REQUIREMENTS AND ENVIRONMENT: Must have good vision and manual dexterity. Able to sit / stand for prolonged periods at a desk and working on a computer. Must be able to work in a cold environment and in tight areas. Able to bend, push, carry, twist, and lift up to 50lbs without difficulty on a continuous basis. This position requires participation in our mandatory respiratory protection program with respect to some essential tasks. Performance of confined space entry is also required with respect to some tasks which are essential to this job. Loud Noise Perform tasks in both cold and hot work environments. Company provided Personal Protection Equipment (PPE) must be worn while on the production floor Exciting Benefits Await You! Enjoy top-tier Medical, Dental, Vision coverage. Pamper your furry friends with Pet Insurance. Stay fit with our Wellness Plan and Free Gym Access. Boost your skills with Employee Tuition Reimbursement. Unlock endless opportunities with College Scholarship for dependents. Reap the Rewards of Our Bonus Program Available to Our Salary and Hourly Employees. Receive a Generous 401k Company Match. Take advantage of Competitive Paid Time Off. Elevate Your Safety Net with Company-Sponsored Life Insurance Coverage. Receive Relocation Assistance for a Smooth Transition. Earn Rewards through our Employee Bonus Referral Program. Elevate Your Workplace Experience with Community Impact Opportunities. Celebrate Together with Employee Appreciation BBQs, Happy Hours, Birthdays, & More! Opportunity Calls! Unsure if you meet all requirements? Don't hesitate, apply! Our recruitment process is prompt and transparent. Your resume will receive swift attention from our talent professionals. If chosen, you'll undergo a recruiter phone screen, followed by interviews with key team members. We value your potential. At Home Market Foods, we champion equal opportunities for all, prohibiting discrimination based on race, religion, gender, and more. Our commitment extends across all aspects of employment, ensuring a fair and inclusive workplace. At this time, Home Market Foods will not sponsor applicants for employment authorization for this position for the following work visas: STEM OPT EAD, H-1B, H-1B1, E-3, O-1, J-1, or TN

SNAPSHOT OF BECOMING OUR LICENSED ELECTRICAL TECH - SERVICE ELECTRICIAN: Company: We are ATD Mechanical Services Inc., a comprehensive plumbing, HVAC, and electrical company Pay: Depending on experience, you'll earn $36.00 - $50.00/hour Job Type: Full-time Schedule: 7:00 am - 4:00 pm, Monday - Friday Service Area: You'll be serving clients throughout our coverage area in Rhode Island If you're a talented electrical professional looking for your next big career move, keep reading to learn how you can reach new heights with us! WHAT'S IN IT FOR YOU: Our trustworthy and skilled team is the backbone of our success. We believe in supporting our people, so they can provide the best quality HVAC and plumbing service to our clients. That's why we provide a great benefits package and competitive compensation. Here are just a few of our perks: Medical Dental Retirement plans Paid time off (PTO) Sick time Tuition reimbursement Bonuses WHY WE'RE A GREAT CHOICE: ATD Mechanical Services Inc. installs and services plumbing and HVAC systems, furnaces, boilers, and water heaters for homes and businesses in Rhode Island and southeastern Massachusetts. We pride ourselves on our friendly and courteous customer service and high-quality results. WHAT YOU'LL BE DOING: Traveling to clients throughout our service area in Rhode Island Assessing electrical systems and equipment Diagnosing the root cause of any problems Performing accurate, high-quality repairs and maintenance Removing faulty parts and installing new components Completing exceptional work and providing professional customer service WHAT YOU'LL BRING TO THE TABLE: Rhode Island electrical license Valid driver's license Are you who we're looking for? If so, the initial application is short and mobile-friendly. Apply now and reach the next level as our Licensed Electrical Tech - Service Electrician! Please do not call us, we will reach out if we are interested in interviewing you, thank you!

What you will do Johnson Controls is hiring a Test/Instrumentation Technician based in our Cranston, RI, testing facility. You will work with a variety of instrumentation, automation and data acquisition equipment in support of the company's activities by performing the following duties. Candidates must be commuting distance to the Cranston, RI, facility, or able to relocate. How you will do it Reads and interprets test plans, procedures, and schematics. Operates and maintains instrumentation, automation, and data acquisition equipment. Supports other technicians and engineers through the collection, documentation, and storage of test data and automation of various test set-ups. Fabricates electrical/mechanical test fixtures. Utilizes programs within the LabVIEW programming environment. Exercises troubleshooting skills and determines corrective actions for abnormal conditions for instrumentation and acquisition systems. Performs various housekeeping duties. Daily collaboration with engineers and various technicians What you will do Required Associate's degree in Electrical Engineering Technology or related field, or equivalent experience. Experience with Labview. Demonstrated proficiency in basic math functions, trigonometry and algebra. Demonstrated proficiency with Microsoft Office applications. Able to work in an environment that consists of several lab and machine shop areas. Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Summit Handling Systems, Inc is an award-winning, privately owned third generation family business with a 70+ year presence in the Northeast. An 'essential' company in the nation's supply chain, we sell, service and rent forklifts and related materials handling equipment from 5 locations, employing over 180 people, and still growing. Look at us at *********************** We are seeking an experienced Equipment Technician, to service various types of equipment at our state-of-the-art facility. This position will require the ideal candidate to work out of our Plainfield location with limited supervision so the ability to work, think and operate independently is a must. Salary Range: $20 - $44 per hour. Additional benefits: - Weekends off, Monday - Friday 7:30am - 4:30pm schedule - Paid training - Paid holidays and sick time - Road technicians are provided with a company vehicle - Retirement plan - Opportunity for advancement - State of the art facilities - Company provided safety equipment General Duties and Responsibilities: Conduct regular inspection and service on various configurations of equipment Ensure forklift is functioning smoothly and is safe for operating Interact with operators to know of any malfunctions of equipment Test operate machinery to detect issues and repair the same Maintain a record of service cycles and part changes Follow all safety norms laid down by the industry for work-related functions Place requisitions for spare parts Ensure proper handling of all repair tools and testing equipment Follow all orders and tasks as assigned by the supervising manager Specific Performance Requirements Analyze and test equipment to ensure proper performance and compliance with manufacturers' specifications and safety requirements. Inspect and diagnose equipment faults and malfunctions to determine required repairs using a variety of electronic meters, infrared engine analyzers, gauges, and computerized diagnostic programs. Ability to determine the cause of failure and take the appropriate steps using OEM manuals and online resources provided by the company to prevent future occurrences. Dismantle and reassemble equipment. Perform routine and scheduled planned maintenance services such as oil changes, lubrication, and tune-ups; maintain equipment service records, identifying and correcting defects or problems. Complete required paperwork, i.e. work orders, warranty documents, etc. and submit timely and accurately with all required information including appropriate signatures. Professionally represent the company to our customers by following the business attire policy, being prompt for service calls, and leaving the customer's work-site neat and orderly. Plan work using procedures, technical manuals, and experience to ensure timely and accurate repair of machinery or equipment. Education and Qualifications High school degree, diploma, or a GED equivalent qualification from a certified school Must have valid drivers license with a good history Must be able to operate a computer Must own hand tools Possess good written and verbal communication skills Meet quality and productivity standards Organization skills Diagnosis skills Job Type: Full-time Experience: Professional mechanical experience: 5 years (Required) Benefits: 401(k) Dental insurance Health Savings Account Health insurance Life insurance Paid time off Referral program Retirement plan Vision insurance Summit Handling Systems is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Pay Range$41,600-$91,520 USD

Job Code **3944** \# of Openings **10** Apply Now (**************************************************** Requisition?org=GATEWAYVENT&cws=55&rid=3944) GVI, Inc., a subsidiary of Three Saints Bay, LLC and Federal Government Contractor industry leader, is seeking Engineering Technicians to effectively and efficiently support our customer in Newport, RI. **Qualified candidates will be expected to:** + Perform mechanical/electrical repair and troubleshooting + Provide equipment maintenance (routine, preventive, corrective) and repairs and support facilities testing and upkeep **Position requirements:** + US Citizen + Ability to obtain and maintain a minimum of Secret Security Clearance; candidates currently possessing an active Secret clearance are preferred. + High School Diploma or Equivalent. + Familiarity with basic hand tools, basic test equipment + Experience on electrical/mechanical repairs and troubleshooting. _Prior experience with Navy systems desired but not required_ . + Ability read and interpret technical drawings, and diagrams + Familiarity with computer use and ability to create basic reports using MS word + Must have a valid U.S. driver's license. + Ability to frequently lift 50 lbs. + Excellent communication skills (verbal, written), and excellent customer service skill _Strong preference will be given to those candidates with experience with the navy Towed Array Handling Systems_ **Position located in: Newport, RI** **Apply at:** ***************************************************** Requisition?org=GATEWAYVENT&cws=42&rid=3944** VEVRAA Federal Contractor Three Saints Bay, LLC and its subsidiaries offer a team-oriented working environment and the opportunity to work with exceptional, dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international. We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, sex, sexual preference, religion, creed, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.

Joe Warren & Sons Company Inc., (JWS) a leading provider of commercial refrigeration and food equipment services and sales throughout New England, seeks to add a Commercial Cooking Equipment Field Service Technician to help lead the company through an exciting phase of growth. Established in 1991, JWS is a family owned-operated business and headquartered in Norwood, MA. JWS has a long history of above-market growth driven by strong customer loyalty, a dedicated and thoughtful management team, and an industry leading reputation for quality service. Kitchen Equipment Technician Responsibilities Properly maintain, service and install commercial cooking/food prep equipment. Accurately and timely completes assignments for all services performed. Consults with the Parts Department to accurately identify recommended parts. Maintains a neat and orderly truck, along with accurate part and tool inventory. Communicates with manufacturers as needed to help with diagnosing problems with equipment. Defines equipment problems, collects data, establishes fact and draws valid conclusions about the work needing to be performed. Provides highest level of service to the customer and professionally communicates the service needed to customers. Promotes and recommends other services provided by JWS to customers. Kitchen Equipment Technician Qualifications High School diploma or GED and valid driver's license. Can work well independently or as part of a cohesive team. Show passion and empathy towards our customers and team. Must be able to use hands for fine manipulation of hand tools. Highly safety conscious and must be able to climb stairs and ladders. Able to follow through on duties and assignments with minimal supervision. Background experience in gas, electric, plumbing, and/or steam. (5) years of experience in commercial equipment repair, or in a related area. Excellent organizational skills, must be motivated and a self-starter with a team-first attitude. Physical Requirements: Ability to frequently kneel, bend, squat, push, pull, reach, and occasionally. lift/carry up to 70 lbs. Ability to work on ladders, roofs, and other high places. Ability to work with moving mechanical parts, pressurized steam equipment, open flames, heated surfaces, liquids, and risk of electrical shock in damp, humid, or freezing conditions. Kitchen Equipment Technician Benefits: Attractive compensation package with periodic reviews, bonuses, and increments Very competitive 401k with a 4% Safe Harbor Match Comprehensive Health Benefits: Medical, Dental (FREE), Vision, and HSA Ready-to-Go Company Vehicles: Equipped with all necessary tools and equipment. Flexible On-call with Overtime: Infrequent on-call schedules and plentiful OT opportunities with incentive pay. Career Growth: Paid training, tuition assistance, and numerous advancement opportunities. Mentoring Incentives: Earn extra by mentoring through our Experienced Training Program. Life & Disability Insurance for your peace of mind Benefit from our company-wide Bonus incentive program with quarterly payouts Enjoy 9 company-funded holidays along with generous PTO Robust career progression opportunities Referral bonuses for expanding the JWS family Vast training and professional development prospects Compensation: $60,000-100,000+ At this time, we are not seeking agency assistance or third-party recruitment services. We are currently unable to sponsor work visas for this position. Applicants must be authorized to work in U.S. without sponsorship. Joe Warren & Sons Co. Inc. champions diversity and inclusivity. We provide equal employment opportunities to all, irrespective of age, color, disability, ethnicity, family status, gender, national origin, race, religion, sexual orientation, veteran status, or any other protected classification. Embrace a diverse, inclusive work environment with us.

The Engineering Technician in the EMC (electromagnetic compatibility) lab provides technical support to engineers in the areas of product testing, data collection, and product and/or process development. Particular to working in the Lab environment, the Engineering Technician also interfaces with internal customers, evaluates test specifications, maintains test equipment, and contributes to schedule creation. * General Responsibilities * Leads analyzing the malfunctions and deviations of control systems to identify and resolve problems. * Advises the engineering team on sample builds * Ensures tooling and equipment validation with engineering. * Performs engineering tests. * Ensures the developtment of testing and data analysis. * Leads cycle time studies that identifies potential bottlenecks. * Identifies irregularities in the process of the manufacturing equipment. * Advises on analysis and prepares reports using metrics obtained from monitoring using raw data, trends and other reports. * Leads technical issues and trains other employees in the team. * Provides changes of documentation in work instructions. Experience / Qualifications * Relevant work experience or knowledge of the role * Must be a team player able to work in a fast-paced environment with demonstrated ability to handle multiple competing tasks and demands * Strong organization, planning and time management skills to achieve results * Holds self-accountable to achieving goals and standards * Proficient in Microsoft Office programs (Outlook, Word, PowerPoint, and Excel) * Soldering skills (through-hole and surface mount) expected. * Ability to lift 50lbs (large test items/heavier electronic equipment) expected. * Existing familiarity with Electromagnetic Compatibility (EMC) standards and test methods is a plus. * Supports Center of Excellence (COE) initiatives by collaborating with global teams to standardize best practices and drive process improvements across multiple projects. * Assists in the development and implementation of new testing protocols and procedures in alignment with COE objectives. * Participates in troubleshooting complex technical issues and shares learnings with COE members to promote knowledge transfer. * Maintains detailed records and documentation to facilitate continuous improvement and compliance with COE standards. * Engages in ongoing training and skill development to stay current with emerging technologies and methodologies relevant to the COE's focus areas. #LI-KK2 #LI-Onsite Hourly Base Pay Range: $33.60 - $46.20 At Sensata, our employees are the key to our success and growth. We recognize that each individual brings their own unique experience, therefore the base salary range information shown above is a general guideline only. Sensata considers several factors when extending an offer, including, but not limited to, a candidate's experience and qualifications, as well as internal equity, market and business considerations. In addition to base salary, Sensata offers competitive medical, dental, vision, life and disability insurance plans, along with education reimbursement, wellness programs, a 401(k) retirement plan with Company matching, and a variety of paid time off, such as vacation or flex-time, sick, bereavement, and parental leave. SmarterTogether * Collaborating at Sensata means working with some of the world's most talented people in an enriching environment that is constantly pushing towards the next best thing * Employees work across functions, countries and cultures gaining new perspectives through mutual respect and open communication * As OneSensata, we are working together to make things work together Click here to view Sensata Recruitment Privacy Statement Click here to view our Sensata Recruitment Privacy Statement for China NOTE: If you are a current Sensata employee (or one of our Affiliates), please back out of this application and log into Workday via the Company Intranet to apply directly. Type "FIND JOBS" in the Workday search bar.

We are seeking skilled and motivated Electronics Technician candidates to support on-site at Naval Undersea Warfare Center (NUWC), you will provide direct support to Code 34 Imaging and Electronic Warfare (I&EW) Team. Position responsibilities include fabrication, manufacture, testing, installation and maintenance of I&EW Sensors and Antenna Shipsets, repair, assembly, installation and test support for Electronic Warfare Sensors and related special support equipment. Duties and Responsibilities: Mechanical and electrical troubleshooting, repair, and assembly of complex I&EW systems Testing of sub-assemblies and completed systems; Collect Antenna Assembly technical data at the component, subassembly, and assembly levels Conduct receipt inspections and determine serviceability of Fleet-returned assets as well as electrical and mechanical inspections to ensure vendor compliance of received parts Conduct Quality Assurance Inspections on new and repaired assemblies as required by directives Analyze the collected technical data for conformance to specifications, identify issues, and provide recommendations to resolve any issues Assembly of Engineering Prototypes including product improvement feedback to engineers, and the completion of drawing redlines, and associated process forms as required Assistance in the development of Test Procedures Develop program status reports such as technical assessments, risk assessments, technical recommendations or technical information Requirements/Skills: Technical School Diploma and two years' experience related to the above tasks, or a minimum of 6 years active-duty submarine combat system experience preferably with experience with US Navy Submarine Combat Systems (BYG-1, EW, SONAR, IMAGING, etc.). Tasking requires a strong attention to detail and working knowledge of Microsoft Office Suite Familiarity with electronic testing procedures and Standard Test equipment Ability to learn and apply techniques quickly as part of a team effort, or independently, to develop innovative technical solutions Documented completion of soldering and / or fiber-optic termination / connectorization / certification / training Strong problem-solving skills and ability to work both independently and in a team environment Strong documentation and communication skills US Citizenship and be able to obtain and maintain a Secret Clearance. Additional Skills of Interest: (not required) Active DoD Security clearance Understanding of DoD engineering design practices Knowledge of EW systems and technology, specifically AN/BLQ-10 Experience in VISIO or similar engineering-oriented documentation applications Working Place: US Naval Undersea Warfare Center, Newport, RI, USA Company : Rite-Solutions - Oct 29th VIrtual Fair

Job DescriptionDescription: About Quantic Evans: Quantic Evans is a proud member of the Quantic™ Electronics Family Quantic™ Electronics, an electronic component company, is a trusted partner in military, aerospace, industrial, and commercial markets with over a century of combined experience as a reliable problem-solver. Being part of Quantic's portfolio has allowed Quantic Evans to continue developing cutting-edge capacitor technology alongside other world-class technology companies representing mission-critical electronics' future. With sites in East Providence, RI, and Sanford, ME, Quantic Evans manufactures high-energy density capacitors for demanding mission-critical applications. We have the most power-dense capacitor technology in the industry. We are routinely specified for defense, aerospace, and energy exploration applications where high reliability and SWaP (space, weight, and power) savings are critical design considerations. ENGINEERING TECHNICIAN, EAST PROVIDENCE, RI Reporting to the Engineering Manager, the Engineering Technician will be responsible for supporting the engineering team in product development, process improvement, and equipment maintenance. This role involves executing product and process development tasks, performing R&D testing, maintaining production equipment, and supporting installation and repair activities. JOB TYPE: Full-time RESPONSIBILITIES: Execute Product, Process Development, and R&D Testing Support engineering activities by setting up and running experiments, collecting data, and assisting with prototype builds and process trials. Conduct Preventative Maintenance Perform regular maintenance on production and lab equipment to ensure optimal performance and reduce downtime. Repair and Install Equipment Assist with the installation, setup, relocation, troubleshooting, and repair of manufacturing and R&D equipment in collaboration with engineering and operations teams. Maintain Facilities Conduct maintenance on HVAC, lighting, compressed air, and water filtration systems. Follow safety protocols and help maintain a clean, organized work environment. Additional duties as assigned Additional duties as required Requirements: QUALIFICATIONS: Associate's degree in Engineering Technology, Mechanical, Electrical, Industrial, or related field (or equivalent technical training/experience). 1+ years of experience in a technical role within manufacturing, engineering, or product development. Familiarity with basic mechanical and electrical systems, hand tools, and diagnostic equipment. Ability to read technical drawings, schematics, and equipment manuals. Strong communication, teamwork, and problem-solving skills. Capability to work in a fast-paced environment to meet deadlines and quotas. Possess a collaborative team-oriented mindset and personality with a hands-on can-do attitude. General knowledge of manufacturing preferred. Must be considered a U.S. Person eligible to work in the United States Ability and willingness to travel to support maintenance in Maine 3-5 days per month. WORK ENVIRONMENT AND PHYSICAL DEMANDS: General office and manufacturing environment. Exposure to hazards associated with manufacturing equipment and tools. This position requires working near electrical and mechanical equipment that could potentially interfere with pacemaker function. Ability to read and write in English. Requires manual dexterity and ability to manipulate small objects. Repetitive hand movements for tasks like assembly or packaging. Ability to lift, push, and pull up to 50 pounds Capability to use a hand truck and other assistive devices for items over 50 pounds Prolonged standing on hard surfaces during shift Walking to various stations or areas of the production floor. Sitting, bending, stooping, pushing and pulling motions Ability to handle small tools, parts, and machinery with precision. Visual acuity for reading measurements, assembly instructions, and monitoring equipment. Hearing ability to detect alarms, machinery sounds, or verbal instructions in a noisy environment Will be required to wear appropriate PPE as outlined by company safety protocols. EEO/AA Quantic is an affirmative action/equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, work-related mental or physical disability, veteran status, sexual orientation, gender identity, or genetic information. We participate in E-Verify. EEO Poster in English EEO Poster in Spanish U.S. EXPORT CONTROLS As a U.S. defense manufacturer, Quantic Evans is required to safeguard U.S. defense-related and other export-controlled articles, technologies, and services from unauthorized access, export, or re-export. The transfer of U.S. export-controlled articles, technologies, or services (including manufacturing processes) to individuals or entities that do not qualify as “U.S. persons,” as defined by 22 CFR 120.62, is prohibited without prior authorization from the appropriate U.S. government agencies, such as the Department of State's Directorate of Defense Trade Controls (DDTC). Under 22 CFR 120.62, a “U.S. person” is defined as a lawful permanent resident as per 8 U.S.C. 1101(a)(20), or a protected individual under 8 U.S.C. 1324b(a)(3). It also includes any corporation, business association, partnership, society, trust, or other entity that is incorporated to do business in the United States, as well as governmental entities at the federal, state, or local levels. It does not include foreign persons as defined in § 120.63. To ensure compliance with U.S. export control regulations, candidates for this position are required to undergo an Export Compliance Assessment. As part of this process, candidates may be asked to provide documentation verifying their status as “U.S. persons” or “foreign persons,” in accordance with U.S. regulation, to determine whether prior authorization is required to perform specific job duties related to this position

Job Description Wire and build electrical control panels, junction boxes and subassemblies per customer requirement. Read and interpret schematics, diagrams, blueprints, specifications, work orders, bills of material. Drill or tap holes to mount control units or to provide openings for components, wiring, or instruments. Utilize a variety of small hand tools such as wire strippers, crimpers, wrenches, screwdrivers, and pliers. Complete point-to-point wiring, and install a wide variety of electronic components including PLCs, relays, lights, switches, etc. Red-line documentation as necessary to initiate ECOs through Engineering. Perform operations such as deburring, grinding & sawing. Operate hand pallet jacks to move material within plant. Install finished assemblies or subassemblies in cases and cabinets. Willingness to work overtime as needed. EDUCATION AND EXPERIENCE Minimum of a High School Education. Technical Certificate in Electrical Controls is desired 2+ years' experience in control panel building, wiring, reading schematics and electrical diagrams. An understanding of electrical currents. Highly motivated, detail oriented and able to work independently as well as in a team environment. Mechanical installation and electrical wiring for control panels and desks. Experience using hand tools to drill, tap, and assemble electrical panel is a must. PHYSICAL DEMANDS Work involves frequent lifting of materials and product up to 30 pounds. Frequent use of hand tools. Long periods of standing. WORKING CONDITIONS Working conditions are normal for a manufacturing environment. Machinery operation requires the use of safety equipment to include but not limited to, eye safety glasses, hearing protectors, safety shoes, and hardhats. Loose fitting clothes and jewelry are not permitted. SAFETY RESPONSIBILITIES Safety shoes are always required throughout the manufacturing plant. Certifications as necessary based on function; lock out/tag out, fork truck certification. Other personal protective equipment as required for drilling, tapping, deburring, cutting, testing, lifting, and moving equipment. Pay Range (Massachusetts): $21.29 - 26.51 per hour. This range reflects the expected base pay for this position in Massachusetts and is based on internal equity and the established job family compensation structure. Actual compensation may vary based on experience, qualifications, and performance.