Engineering associate jobs in Huntington, NY - 396 jobs

We are seeking a qualified Transit Project Lead (Engineer or Planner) with ten (10) plus years' experience to become a part of our established Transit Group for our Albany, Poughkeepsie, Syracuse or White Plains Offices. This position will work on a variety of projects and interact with traffic engineers, highway engineers, transportation planners and our clients. Projects generally focus on bus related planning and infrastructure, and can include transportation and transit planning, station design, highway design, facilities and site design, alternatives analysis and concept development, and construction coordination. The position may require efforts outside normal business hours to travel, meet client requests and/or attend meetings. A background and a desire to improve our public transportation systems is a plus. Responsibilities include: Investigate options to improve efficiency in bus service and make recommendations for network redesign and planning Bus rapid transit experience Evaluate bus operations to identify opportunities to reduce overhead costs, Design bus facilities including maintenance yards and bus stops Lead intermediate and limited complex transportation planning, and/or engineering assignments in this field. Lead or assist with multidisciplinary projects involving architecture, mechanical and structural engineering disciplines Prepare conceptual plans, graphics and documents. Lead project and/or public meetings. Responsible for report writing for all related projects. Represent the organization in communications and conferences pertaining to broad aspects of Public Transportation related planning and/or engineering assignments. Assume client relations and financial responsibilities for routine projects. Develop and/or review project documents for scope, conformity and quality. Work with accounting to complete monthly invoicing for projects. Assist with project management duties - staffing, scope, schedule and budget development Assist with business development activities, including proposal preparation Check planning and designs prepared by others Direct coordination with clients Job Requirements: 10+ years of experience in a similar role. A professional licensure and/or certifications in related planning and engineering disciplines. (AICP, PE) The candidate must have experience working on public transportation projects in some capacity, preferably with New York State public transportation authorities and FTA experience a plus. Active member of a professional practice organization. Pay Range: Albany/Syracuse, NY: $48/hour - $62.50/hour Poughkeepsie, NY: $52/hour - $68/hour White Plains, NY: $55/hour - $72/hour Pay is based on applicant's ability/experience and will be rated accordingly. EXTRAs At Creighton Manning, continuous learning and mentoring are part of our DNA. There are opportunities to advance your career, either on the technical track towards Project Manager or into various corporate leadership positions. Team members get 360 reviews with input from peers and managers, to get a broad picture of their contributions. #INDHP Qualifications EducationBachelors of Engineering (required) Licenses & CertificationsDriver's License (required) Professional Engineer (required) Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Managed Services Engineer Job ID: 554165595 Lightpath is one of the largest competitive local exchange carriers in the tri-state area. Weown and operate our infrastructure "from the ground up" by deploying over 20,000 route miles connecting 13,500 on-net/LIT buildings. With a strong portfolio of cutting edge solutions for Internet, WAN, Voice, SD-WAN, Security & Cloud services, we enable Enterprise customers of all sizes the ability to react to new challenges while developing best practices for the future. With Lightpath's continued focus on network excellence and a "customer first" service commitment, we are building a workforce of the best talent that will meet the needs of our customers and reflect the diverse communities we serve. Job Summary Lightpath is seeking a Managed Services Engineer who thrives in fast paced environments while managing multiple priorities. The Managed Services Engineer is critical in gathering and understanding technical requirements to provide guidance for WAN/LAN network configurations. This role requires the ability to design and document robust call flows and solutions that provide maximum voice resiliency and business continuity. Responsibilities * Voice and Network Design/Deployment. * Lead customer network design discussions and calls. * Assess location network and infrastructure readiness. * Identify telephony requirements including structured cabling needs. * Design tailored Layer 2/3 network infrastructure. * Configure and deploy Adtran and Cisco switches and routers. * Design and configure call flows on Metaswitch and Intermedia UC platforms. * Client Engagement. * Lead cross discipline and cross-functional discussions to gather to understand client requirements and provide technical insights. * Communicate project plans and technical impacts clearly to stakeholders. * Assess telephony readiness and recommend cabling and infrastructure upgrades. * Clearly and professionally communicate project plans, potential impacts and remediation requirements to customers. * Track and manage time effectively to accomplish multiple ongoing projects. Qualifications 5+ years of experience in voice-focused roles. Familiarity with UCaaS systems, Zoom/Zoom Phone, Microsoft Teams, Ring Central, or similar service provider cloud platforms is strongly preferred. Experience working in a service provider environment is preferred. Be proficient using Wireshark and reading PCAPs. Have a deep understanding of SIP and SIP call flows. Comfortable using the command line on Adtran, Cisco, or Juniper hardware. Comfortable configuring enterprise SBCs or firewalls. Able to diagnose, identify, and resolve IP network problems. Cisco, Adtran or SIP School certification is a plus. High School Diploma or equivalent. All qualified applicants will be considered regardless of location. Lightpath is an Equal Opportunity Employer committed to recruiting, hiring and promoting qualified people of all backgrounds regardless of gender, race, color, creed, national origin, religion, age, marital status, pregnancy, physical or mental disability, sexual orientation, gender identity, military or veteran status, or any other basis protected by federal, state, or local law. Lightpath collects personal information about its applicants for employment that may include personal identifiers, professional or employment related information, photos, education information and/or protected classifications under federal and state law. This information is collected for employment purposes, including identification, work authorization, FCRA-compliant background screening, human resource administration and compliance with federal, state and local law. This position is identified as being performed in/or reporting to company operations in New York State. The pay range at the time of posting in the specified locations is $90,000 - $110,000/year. Pay ranges are supplied in compliance with New York State law. Pay is competitive and based on a number of job-related factors, including skills and experience. Some of our featured benefits include medical, dental, vision insurance, yearly bonus program and company matched 401k.

Piping Rock is searching for a Mechanical Engineer Intern. Under the direction of the VP of Engineering, the Mechanical Engineer intern will support a variety of projects and should have a strong familiarity in mechanical drawings. Responsibilities: Develop AutoCAD files from parts, sketches or brief verbal instructions Develop AutoCAD files related to block diagrams for either existing or new facilities AutoCAD drawings for different mechanical parts or systems Be able to Organize and save all the files in a logical way for future reference Other duties as needed Qualifications: Currently pursuing a bachelor's degree in mechanical engineering (junior or senior year preferred) Experience in drawing mechanical parts Experience with AutoCAD or similar software Excellent verbal, written communication skills Strong quantitative ability interpersonal communication and organization skills Must be able to work part time 2-3 days in office Ability to lift 50 pounds We proudly offer: Medical, Dental, Vision, 401K with Company Match, Pet insurance and more! We reward the hard work of our team members with fun and exciting company events, Summer Picnic, Festive Packages, Holiday Celebrations, and associate referral bonuses! Founded in 2011, Piping Rock Health Products has gone on to win Long Island's Top Workplaces Award 6 years in a row & securing the spot as Top Supplement Manufacturing Company 2024 by Food Business Review! Supported by a group of vitamin visionaries with over 40 years of industry experience and a carefully curated team of talented associates. Piping Rock is a global vitamin and supplement manufacturer with an unwavering commitment to creating quality wellness products. We believe that family always comes first, and that the dedication of our associates is the key ingredient to our success. We are drug free workplace, regulated by the FDA, required to follow Federal Guidelines; therefore in order to start as well as maintain employment, you must be able to successfully clear drug screening processes, which include testing for all illegal substances per Federal Guidelines. Piping Rock Health Products, INC is an Equal Opportunity Employer.

Did you love building as a kid? Do you enjoy taking something apart, just to figure out how to put it back together? Do you geek out on robots? Our engineers drive packaging innovation, creating new ways to improve - and increase - performance. We're passionate about designing custom equipment that exceeds our customers' expectations. Our engineers partner closely not only with our customers, but also with peers across sales, manufacturing, and assembly. We offer rewarding, challenging opportunities throughout the world, across multiple packaging segments. If you're excited by how machines work and want to make them better, we want to talk to you. Do we have your attention? Keep reading. Modern Packaging is seeking a talented Mechanical Design Engineer to develop, design, and implement new product designs of automated machinery. Candidate shall have the ability to create new designs, modify existing designs, and provide technical support to customers. The position is located at our Deer Park, NY location and will report to the Director of Engineering. Are you excited about this work? Engineering, design, and fabrication of automated machinery Develop machine drawings, 3D modeling, assembly and detail drawings. Manage projects from quote to FAT (Factory Acceptance Test). Interface with manufacturing to ensure parts are properly fabricated, machined, and assembled. This will include updating revisions to mechanical design specifications/drawings. Interface with assembly department to conduct machine testing and proper operation. Interface with other departments e.g., controls, parts, purchasing, etc., to coordinate work/projects and ensure customer on-time delivery. Create and maintain Bill of Materials. What's in it for you? There's no monopoly on innovative ideas or limits to how far you can advance with our team. We offer an open, communicative environment that fosters individual initiative. We pride ourselves in being a company where people are happy and choose to build a career. In addition to growth opportunities, as a ProMach employee, you receive more than just a paycheck. The education and experience you bring to a role with us matter. Placement within our salary range is determined based upon years of directly relatable experience for your position. These components, along with local and national compensation survey data, contribute to deciding a candidate's potential starting rate of pay. Total compensation includes your pay, potential short-term incentive opportunities, comprehensive medical/dental/vision programs, as well as life insurance, disability insurance, paid time off programs, a retirement savings plan with a company match, and a wellness program. And because we understand the importance of feeling protected, there is no waiting period for benefits - you are eligible on your first day of employment! Please note that the pay ranges listed on external job boards, outside our posting details, do not accurately reflect our internal compensation ranges. Base Salary Range: $95,000 - $115,000 If this sounds like you, we want to connect! Bachelor's degree in Mechanical Engineering or Mechanical Engineering Technology (BSME or BSMET), or similar engineering or technical degree from an accredited four-year college or university or equivalent industry experience in mechanical design required. 3+ years' experience in design of automated industrial machinery. Experience using AutoCAD and Autodesk Inventor and/or SolidWorks. General knowledge of manufacturing processes, techniques, and practices. Strong analytical skills, ability to utilize knowledge to provide creative design ideas. Excellent verbal and written communication skills. Desire to be hands-on with equipment building & design, ability to work both independently and in a team environment. Pro Mach, Inc. We have been named to the Inc. 5,000 list of the fastest growing private companies in the U.S. seven times. We continue to introduce innovative products, enter new markets, expand our global presence, and actively acquire new capabilities. We have the rewards, opportunities, and the market strengths of a large organization combined with the entrepreneurial culture of a small, fast-paced company. You will enjoy the benefits of working with a growing company that competes globally with the personal touch and feel of a smaller company where you can make an impact every day. Curious about life at ProMach? Follow us on LinkedIn, Twitter, and Instagram! More career opportunities to consider! Pro Mach is an Equal Opportunity Employer. Pro Mach uses E-Verify to verify employment eligibility of all new hires to work in the United States. Pro Mach is a drug-free workplace. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. #MODER

Purpose and Scope: Gain professional experience in a manufacturing setting. Required Skills, Education and Experience: • Pursuing a Bachelor's degree in Mechanical or Manufacturing Engineering • Excellent verbal and written communication skills • MS Office proficient • Experience with group work environments

Freeport, Texas The world needs solutions, and we need you! At BASF, we create chemistry through the power of connected minds. By balancing economic success with environmental protection and social responsibility, we are building a more sustainable future through chemistry. As the world's leading chemical company, we help our customers in nearly every industry meet the current and future needs of society through science and innovation. We provide a challenging and rewarding work environment with a strong emphasis on process safety and the safety of our employees and the communities in which we operate. We are always working to form the best team-especially from within, through an emphasis on lifelong learning and career development. At BASF, we are committed to creating an exceptional workplace that values diversity and prioritizes our employees' well-being and development. Our dedication has been recognized through various awards and accolades. In 2024, BASF received Business Group on Health's Best Employers: Excellence in Health & Well-being award and ranked on the Top 50 Employers list by the readers of Minority Engineer Magazine. Fair360 (formerly Diversity Inc) also ranked us 22 on their Top 50 Companies List, and we were named one of America's Best Large Employers by Forbes and Statista. For the 10th consecutive year, we are proud to have achieved a top score in the Human Rights Campaign Foundation's Corporate Equality Index, earning the 2023-2024 "Equality 100 Award" as a Leader in LGBTQ+ Workplace Inclusion. Come join us on our journey to create innovative solutions for a sustainable future! Where the Chemistry Happens.. BASF's Technical Development Programs (TDPs) were created to meet the needs of the business within the Gulf Coast by providing highly motivated, local university students that are graduating in engineering an opportunity to enhance their technical and manufacturing engineering skills through a variety of diverse learning experiences. Participants will contribute to rotational assignments within Freeport, Texas. They will develop technical skills and a deeper understanding for manufacturing, while fulfilling specific business needs. Participants also have the opportunity to assess their capabilities, skills, and interests and gain valuable exposure to BASF's culture, values, and decision-makers. Belong to Something Bigger. #belongat BASF Apply for the BASF Mechanical Engineering TDP Program! Program Summary: APPLICATIONS ARE AVAILABLE TO STUDENTS RECEIVING A BACHELOR'S DEGREE IN MECHANICAL ENGINEERING BETWEEN DECEMBER 2025 - MAY 2026. * As a highly motivated rising graduate, you will participate in a 24-month engineering rotational program with two, one-year rotations in various technical areas, including: Manufacturing/Operations and Maintenance * Successfully engaging across the business, you will be exposed to the technical and scientific aspects of plant engineering, while also working in areas of safety and environment to uphold our high standards * Upon your completion of the program, you may be offered direct placement within the organization in a variety of disciplines in engineering and production * Potential start dates are Spring/Summer 2026 Create your own chemistry: What We Offer You... Adding value to our customers begins with adding value to you. You@BASF is the suite of benefits, perks, programs and unique opportunities we offer to support you-the whole you-in all stages of your life and career. With you@BASF, you create your own chemistry. The total rewards that you receive as a BASF employee go way beyond a paycheck. From competitive health and insurance plans, to robust retirement benefits that include company-matching contributions, to making sure you never stop learning, we believe investing in you is investing in our success. Working for a large, global organization, you'll have a chance to grow professionally and personally, expand your network and build a rewarding and dynamic career. * Enhanced career and technical development, and value delivery to BASF through planned assignments * Development of your technical expertise and the ability to network with upper level management throughout BASF * A comprehensive program of employee benefits and a competitive retirement savings plan To learn more about our programs, visit: ******************************* Formula for Success... * Graduates receiving a Bachelor's degree in Mechanical Engineering between December 2025 - May 2026 * Demonstrated academic achievement (minimum GPA 3.0) * Authorization to work in the U.S. now and in the future without restrictions or future sponsorship * Active participation in extra-curricular activities and on-campus organizations * Excellent written and oral communication skills * Previous internship/co-op experience is a plus Privacy statement BASF takes security & data privacy very seriously. We will never request financial information of any kind via email, private text message or direct message on any social medial platform or job board. Furthermore, we will never send a candidate a check for equipment or request any type of payment during the job application process. If you have experienced any of the above, please contact ************* to report fraud. Equal employment opportunities We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, age, citizenship, color, religion, sex, marital status, national origin, disability status, gender identity or expression, protected veteran status, or any other characteristic protected by law. Applicants must be currently authorized to work in the United States on a full-time basis.

Apply Engineering Technician (Mechanical) SME Department of Transportation Maritime Administration Apply Print Share * * * * Save * This job is open to * Requirements * How you will be evaluated * Required documents * How to apply This position is established to provide instructions to Midshipmen in the Engineering Laboratories and the fabrication, installation, and maintenance of instructional equipment in the various Engineering laboratories used for the Engineering Education Program. Summary This position is established to provide instructions to Midshipmen in the Engineering Laboratories and the fabrication, installation, and maintenance of instructional equipment in the various Engineering laboratories used for the Engineering Education Program. Overview Help Accepting applications Open & closing dates 01/06/2026 to 07/06/2026 Salary $88,005 to - $114,413 per year Pay scale & grade GS 11 Location 2 vacancies in the following location: Kings Point, NY Remote job No Telework eligible No Travel Required Not required Relocation expenses reimbursed No Appointment type Permanent Work schedule Full-time - Full Time Service Competitive Promotion potential 11 Job family (Series) * 0802 Engineering Technical Supervisory status No Security clearance Not Required Drug test No Position sensitivity and risk Moderate Risk (MR) Trust determination process * Suitability/Fitness Financial disclosure No Bargaining unit status Yes - This is a Bargaining unit position represented by (AFGE/2116). Announcement number MARAD.MMA-2026-0017 Control number 853651900 This job is open to Help The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. Federal employees - Competitive service Current federal employees whose agencies follow the U.S. Office of Personnel Management's hiring rules and pay scales. Career transition (CTAP, ICTAP, RPL) Federal employees whose job, agency or department was eliminated and are eligible for priority over other applicants. Land and base management Current or former employees of a base management agency. Veterans Veterans of the U.S. Armed Forces or a spouse, widow, widower or parent of a veteran, who may be eligible for derived preference Military spouses Military spouses of active duty service members or whose spouse is 100 percent disabled or died on active duty. Individuals with disabilities Individuals who are eligible under Schedule A. Family of overseas employees Family members of a federal employee or uniformed service member who is or was, working overseas. Peace Corps & AmeriCorps Vista Individuals who have served at least 2 years with the Peace Corps or 1 year with AmeriCorps VISTA. Special authorities Individuals eligible under a special authority not listed in another hiring path. Clarification from the agency Open to current and former Federal employees with competitive status, VEOA Applicants, AND All U.S. Citizens. Duties Help As an Engineering Technician (Mechanical), you will: * Instruct Midshipmen and provide support for faculty led courses in various Marine Engineering Laboratories. * Be responsible for the implementation of proper operational processes and safety procedures in the laboratories. * Demonstrate knowledge of welding technology and welding instruction, welding methods in a classroom/laboratory environment. * Be responsible for the operation, installation, maintenance, troubleshooting, repair, refurbishment, and upgrading of various mechanical instructional equipment in all of the Marine Engineering laboratories. The ideal candidate is a highly motivated, experienced professional mechanical technician who has experience providing instruction and maintaining equipment in an academic laboratory environment. The candidate will have experience in welding and machine shop operations, and have experience operating, installing and repairing complex instructional equipment. The candidate will have experience in various marine engineering environments, including diesel, steam, refrigeration, and others. Requirements Help Conditions of employment * You must be a U.S.Citizen and eligible for consideration. * You must meet specialized experience to qualify. * Required documents must be submitted by the closing date. * Submit application and resume online by 11:59 PM EST on the closing date. CONDITIONS OF EMPLOYMENT: As a condition of employment for accepting this position, you will be required to serve a 1-year probationary period during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider: * your performance and conduct; * the needs and interests of the agency; * whether your continued employment would advance the organizational goals of the agency or the Government; and * whether your continued employment would advance the efficiency of the Federal service. Upon completion of your probationary period, your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest. * SELECTIVE SERVICE: Males born after 12/31/1959 must be registered for the Selective Service. * BACKGROUND INVESTIGATION: You will be required to complete a background/security investigation and meet preliminary requirements prior to onboarding. * PROBATIONARY PERIOD: You must complete a one-year probationary period (unless already completed). * DEU REQUIREMENTS: Applicants selected under delegated examining procedures may be required to successfully complete a one-year probationary period (unless already completed). Qualifications Individual Occupational Requirements for series 0802 (for positions at GS-4 or equivalent and above): This series covers technical positions supervising, leading, or performing work involving applying a practical knowledge of the methods and techniques of engineering or architecture; and construction, application, properties, operations, and limitations of engineering systems, processes, structures, machinery, devices, and materials. Examples of qualifying specialized experience include technical work in: drafting, surveying construction estimating, physical science, mathematics, aerospace, architecture, chemicals, electrical or mechanical systems, mining, petroleum, or nuclear systems. Experience in a trade or craft may be credited as specialized experience when the work provided intensive knowledge of engineering principles, techniques, methods, and precedents. Examples are trade positions with substantial developmental, test, or design responsibilities such as: * Planner and estimator who analyzed designs for production purposes. * Instrument maker or model maker who performed design or development work on devices fabricated. For more information refer to: ********************************************************************************************************************************************************* To determine if you are eligible, review the following grade specific details. You will be asked questions as part of your application but make sure to verify how you meet this experience in your resume, or you may be deemed ineligible. For the GS-11: On Experience, you must have at least one year of specialized experience, equal or equivalent to the GS-09 grade level, which included: * Experience in the use and applications of various types of hand tools and power tools, fabrication tools, measuring tools, and similar tools. * Experience in the installation, operation, maintenance, and/or repair of mechanical equipment such as pumps, valves, piping, steam and/or gas turbines, diesel engines, heat exchangers, control systems, etc. OR equivalent equipment typically in an industrial environment. Highly Desirable Experience: * Experience instructing in an Academic Engineering environment. * Experience operating and/or instructing the use of the various welding processes. * Experience in the operation and/or instructing the use of lathes and mills. * Experience working underway in a marine environment. * Ability to review and comprehend schematics, diagrams, detailed drawings, sketches, manuals, or the equivalent. You cannot qualify based on education at the GS-11 level; you must have experience. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will also be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: * Education and Training - Knowledge of teaching, training, research, making presentations, lecturing, testing, and other instructional methods. * Industrial Equipment Operation - Knowledge of principles and methods for operating industrial equipment. * Mechanics - Knowledge of machines and tools, including their design, use, benefits, repair, operation, and maintenance. * Metal Processing and Metalworking - Knowledge of materials, methods, and appropriate tools to process, treat, form, or shape metal. * Teaching - Help others learn through formal or informal methods; identify training needs; provide constructive feedback; coach others on how to perform tasks; act as a mentor. For all types of consideration, experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. All applicants must meet all qualification requirements by the closing date of this announcement. Additional information The Fair Chance to Compete for Jobs Act prohibits the Department of Transportation and its Operating Administrations from requesting an applicant's criminal history record before that individual receives a conditional offer of employment. In accordance with 5 U.S. Code § 9202(c) and 5 C.F.R § 920.201 certain positions are exempt from the provisions of the Fair Chance to Compete Act. Applicants who believe they have been subjected to a violation of the Fair Chance to Compete for Jobs Act, may submit a written complaint to the Department of Transportation by email at, *********************. To learn more, please visit our page at: The Fair Chance to Compete Act | US Department of Transportation This announcement may be used to fill additional positions if similar vacancies occur within 90 days of the issue date of the referral certificate. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. How you will be evaluated You will be evaluated for this job based on how well you meet the qualifications above. DESCRIBING YOUR EXPERIENCE: PLEASE BE CLEAR AND SPECIFIC. WE WILL NOT MAKE ASSUMPTIONS REGARDING YOUR EXPERIENCE. If your resume/ application does not support your questionnaire answers, we will not allow credit for your response(s). Your resume must contain sufficiently detailed information upon which to make a qualification determination. Please ensure that your resume contains specific information such as position titles, beginning and ending dates of employment for each position, average number of hours worked per week, and if the position is/was in the Federal government, you should provide the position series and grade level. All applicants: Your application will be reviewed in two phases determine how you move forward in the hiring process. Phase I: Your resume will be reviewed to determine your technical qualifications for this position based on the required specialized experience. ONLY two (2) pages of your resume will be reviewed. Additional information beyond your resume (e.g., cover letter, links embedded in your resume) will not be reviewed. Applicants passing "Phase I" will move on to the "Phase II" of the assessment process where your application will be reviewed and rated based on the KSAs/Competencies listed in the vacancy announcement by a Subject Matter Expert (SME). You may preview questions for this vacancy. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. Required documents Required Documents Help RESUME: In accordance with the OPM memorandum titled Merit Hiring Plan, dated May 29, 2025, resumes with a maximum of two (2) pages in length will be accepted as part of your application. These should be legible and in a readable font size. A determination of your eligibility and/or qualifications will be based only on those two (2) pages. Your resume MUST contain specific information that can be used to make a qualification determination, including employment beginning and ending dates for each position, whether employment is Full-time or Part-time, or average number of hours worked per week, and position titles. If the position is/was in the Federal government, you will need to provide the position series and grade level. The resume should show relevant experience and education, as well as support the required specialized experience. PERFORMANCE APPRAISALS/INCENTIVE AWARDS: If applicable, performance appraisals and/or Incentive award documentation may be submitted and forwarded to the selecting official in consideration of your application. To receive credit, submit a recent performance appraisal (dated within 18 months) showing the official rating of record, signed by a supervisor, or statement why the performance appraisal is unavailable (do not submit a performance plan) and/or incentive award documentation dated within the last 18 months (i.e. performance awards, special act or achievement awards, quality step increases, etc.). VETERANS: Your last DD214 (member 4 copy), Certificate of Release or Discharge from Active Duty, that shows the type of discharge and all dates of active duty is required to verify your eligibility. * If applying to a vacancy opened to all US Citizens under category rating and wish to be considered as a preference eligible, you need to submit a copy of your DD214 (member-4 copy). * If claiming preference eligibility as a disabled veteran, you must submit proof of entitlement of this preference which is normally a valid letter from the Department of Veterans Affairs certifying to the present existence of the service-connected disability and indicating the percentage of your disability. An SF-15 is desired but not required. * If applying to a vacancy opened Status and you are requesting consideration under Veteran's Employment Opportunity Act (VEOA) (********************************************* you need to provide a copy of your last DD214 (member-4 copy), which verifies your military service dates, reason for separation, OR certification of separation that shows a discharge date within 120 days of the closing of this announcement, and eligibility for consideration under the Veterans Employment Opportunity Act. FEDERAL APPLICANTS: You must submit SF-50(s) that verify your highest competitive grade, full performance level, and eligibility as a federal applicant. DO NOT submit an award SF-50 as these often do not verify grade or eligibility. For consideration for a promotion, Box 4 of the SF-50 must show a date that is at least 52 weeks prior to the job announcement closing. We recommend submitting your last promotion SF-50 or within-grade increase SF-50. Pay adjustment raise SF-50s for the current year will not support the 52 weeks' time-in-grade requirements. ************************************************************ NON-COMPETITIVE APPLICANTS: If requesting concurrent consideration for Non-competitive (NC) appointment eligibility, you must provide the appropriate SPECIAL APPOINTING AUTHORITY DOCUMENTS, such as PCS orders (military spouse) describing move & marriage certificate; letter from VA or DD214 describing 100% disability of spouse; letter from State Vocational Office certifying disability (schedule A), etc. For more information, visit military spouse NC appointments or Persons with Disabilities NC appointments. DISPLACED EMPLOYEES: If requesting consideration under the Career Transition Assistance Program (CTAP) or Interagency CTAP program (ICTAP), you must meet the well qualified standards for this vacancy (meeting minimum requirements for position and scoring at least an 80) and provide all of the following documents: * your most recent performance appraisal, * the proof of eligibility letter from the Agency, and * your most current SF-50, displaying current series and grade. Displaced employees may be eligible for ICTAP or CTAP priority consideration. For more information, please review the OPM Employee's Guide to Career Transition. Failure to submit any of the required documents by the closing date of the vacancy will result in your removal from consideration for this position. Please review your application prior to final submission and ensure you have submitted all appropriate documents. Uploading documents to USAJobs does NOT ensure inclusion with your application to our system. You must verify that the documents are in the system with your application prior to final submission. If you are relying on your education to meet qualification requirements: Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating. How to Apply Help You must submit a complete application package (including resume, vacancy questions and supporting documents) no later than 11:59 (EST) on the closing date of the announcement. * To begin, click the "Apply Online" button on the job announcement posting. * Follow the directions to register, submit all required documents and complete the assessment questionnaire. * You may review your saved application(s) at ************************* If you are having difficulty applying online, please contact the DOT Automated Staffing Office via email at: ***************** Agency contact information Automated Staffing Office Phone 000-000-0000 Fax 000-000-0000 Email ***************** Address DOT, MARITIME ADMINISTRATION Submit Application and Documents Online 1200 New Jersey Ave SE / HAHR - 50 Washington, District of Columbia 20590 United States Next steps You may check your application status by logging into USAJobs.com. (Select "My USAJOBS" and click "Applications"). Within two weeks of the closing date, a Human Resources Specialist will evaluate your application. Ratings will be determined based on the documents and information received by the closing date. Qualified candidates will be assigned a category, not including points that may be assigned for veterans' preference. If the vacancy is advertised under status, your application will be scored on a scale between 70 - 100. The most highly qualified candidates are then referred to the hiring manager for further consideration. If the vacancy was advertised under category rating, then the appropriate veteran's preference will be applied. If you are selected for an interview, the hiring agency will contact you directly. Once the position is filled, we will notify all applicants of their final status. Fair and transparent The Federal hiring process is set up to be fair and transparent. Please read the following guidance. Criminal history inquiries Equal Employment Opportunity (EEO) Policy Financial suitability New employee probationary period Privacy Act Reasonable accommodation policy Selective Service Signature and false statements Social security number request Required Documents Help RESUME: In accordance with the OPM memorandum titled Merit Hiring Plan, dated May 29, 2025, resumes with a maximum of two (2) pages in length will be accepted as part of your application. These should be legible and in a readable font size. A determination of your eligibility and/or qualifications will be based only on those two (2) pages. Your resume MUST contain specific information that can be used to make a qualification determination, including employment beginning and ending dates for each position, whether employment is Full-time or Part-time, or average number of hours worked per week, and position titles. If the position is/was in the Federal government, you will need to provide the position series and grade level. The resume should show relevant experience and education, as well as support the required specialized experience. PERFORMANCE APPRAISALS/INCENTIVE AWARDS: If applicable, performance appraisals and/or Incentive award documentation may be submitted and forwarded to the selecting official in consideration of your application. To receive credit, submit a recent performance appraisal (dated within 18 months) showing the official rating of record, signed by a supervisor, or statement why the performance appraisal is unavailable (do not submit a performance plan) and/or incentive award documentation dated within the last 18 months (i.e. performance awards, special act or achievement awards, quality step increases, etc.). VETERANS: Your last DD214 (member 4 copy), Certificate of Release or Discharge from Active Duty, that shows the type of discharge and all dates of active duty is required to verify your eligibility. * If applying to a vacancy opened to all US Citizens under category rating and wish to be considered as a preference eligible, you need to submit a copy of your DD214 (member-4 copy). * If claiming preference eligibility as a disabled veteran, you must submit proof of entitlement of this preference which is normally a valid letter from the Department of Veterans Affairs certifying to the present existence of the service-connected disability and indicating the percentage of your disability. An SF-15 is desired but not required. * If applying to a vacancy opened Status and you are requesting consideration under Veteran's Employment Opportunity Act (VEOA) (********************************************* you need to provide a copy of your last DD214 (member-4 copy), which verifies your military service dates, reason for separation, OR certification of separation that shows a discharge date within 120 days of the closing of this announcement, and eligibility for consideration under the Veterans Employment Opportunity Act. FEDERAL APPLICANTS: You must submit SF-50(s) that verify your highest competitive grade, full performance level, and eligibility as a federal applicant. DO NOT submit an award SF-50 as these often do not verify grade or eligibility. For consideration for a promotion, Box 4 of the SF-50 must show a date that is at least 52 weeks prior to the job announcement closing. We recommend submitting your last promotion SF-50 or within-grade increase SF-50. Pay adjustment raise SF-50s for the current year will not support the 52 weeks' time-in-grade requirements. ************************************************************ NON-COMPETITIVE APPLICANTS: If requesting concurrent consideration for Non-competitive (NC) appointment eligibility, you must provide the appropriate SPECIAL APPOINTING AUTHORITY DOCUMENTS, such as PCS orders (military spouse) describing move & marriage certificate; letter from VA or DD214 describing 100% disability of spouse; letter from State Vocational Office certifying disability (schedule A), etc. For more information, visit military spouse NC appointments or Persons with Disabilities NC appointments. DISPLACED EMPLOYEES: If requesting consideration under the Career Transition Assistance Program (CTAP) or Interagency CTAP program (ICTAP), you must meet the well qualified standards for this vacancy (meeting minimum requirements for position and scoring at least an 80) and provide all of the following documents: * your most recent performance appraisal, * the proof of eligibility letter from the Agency, and * your most current SF-50, displaying current series and grade. Displaced employees may be eligible for ICTAP or CTAP priority consideration. For more information, please review the OPM Employee's Guide to Career Transition. Failure to submit any of the required documents by the closing date of the vacancy will result in your removal from consideration for this position. Please review your application prior to final submission and ensure you have submitted all appropriate documents. Uploading documents to USAJobs does NOT ensure inclusion with your application to our system. You must verify that the documents are in the system with your application prior to final submission. If you are relying on your education to meet qualification requirements: Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

About ITS: Do you have the CHOPS? IT Solutions lives its values: Client Success is Our Success, Hungry for the Journey, Ownership Thinking, Passionate Problem Solving, and Surrender the Ego. If your values align, we want you to be a part of a fast-growing Managed Service Provider specializing in providing high-end technology solutions to small and mid-market businesses. IT Solutions is a nationally recognized leader in the IT space, with over 25 years of experience and thousands of satisfied clients. Join and grow with us, as we continue to innovate new ways to help businesses Experience Excellence. Job Summary: The Associate Engineer, Managed Services is part of the Managed Services team responsible for supporting multiple clients and handling inbound and escalated inquiries on the Service Desk. The ideal candidate is a dedicated, relentless problem solver who applies logic and an instinctive approach to resolving technical issues. At IT Solutions, most of our clients rely on us as their sole technological resource. This person should enjoy learning new technologies on the fly while solving diverse technical challenges. The candidate should understand the value of best practices and have the foresight to thoroughly consider all potential outcomes before making impactful changes. The ability to manage the stress of client-down situations is an absolute must, and it is paramount to always provide excellent customer service. Responsibilities: Manage service tickets assigned to your personal and team queue and respond in agreed-upon timeframe. Provide superior service to customers and clients with limited supervision consistently. Provides remote hardware/software support, documentation, support logs and other related information throughout triage process. Act as internal escalation point for other Technicians to engage for technical assistance or process guidance and provide guidance to teammates on operational processes, troubleshooting or customer service. Responsible for the management of network, datacenter, security, and voice technologies. This includes but is not limited to Cisco, Sonicwall, Palo Alto, Juniper, F5, HP, Aruba, VMWare, Hyper-V, NetApp and other technologies. Analyzes and troubleshoots the logs and tracks the nature and resolution of problems and can perform all levels of routing incident analysis. Uses monitoring tools to investigate potential issues or respond to monitoring events, this can include but not be limited to Kaseya VSA, Connectwise Automate, LogicMonitor, Nagios, etc. Assists in monitoring and maintaining network hardware and software; analyzes and troubleshoots the logs and tracks the nature and resolution of problems and can perform all levels of routing incident analysis. Interacts with telecommunication, hardware and software vendors and operates on the customers' behalf to drive resolution of issues while providing regular progress updates to any incident stakeholders. Interact and work directly with multiple advanced technician groups and vendors to escalate technical issues, provide client updates, and drive incidents to resolution often collaborating between more than one group at a time. Work regularly with internal service and project coordinators who assign tickets to the Service DeskTeam. Produce detailed service reports regularly and communicate updates or changes internally and to the clients. Participate in a week-long on-call rotation a few times per year. Travel onsite to client offices to provide services. Days not spent traveling will be worked onsite at IT Solutions or at times working from home Knowledge, Skills, and Abilities: Strong oral and written communication skills Effective time management and multi-tasking skills Maintains the ability to stay organized and be detail-oriented Demonstrates a passion for solving problems or helping others and take the initiative in driving continuous improvement/execution excellence Exceptional organizational skills, including the ability to self-manage and multi-task effectively and accurately in a fast-paced and dynamic environment Confident and comfortable with client facing activity. Understanding of all Microsoft 365 offerings, as well as a basic understanding of Active Directory. Ability to troubleshoot and configure hardware such as printers, laptops, etc. Ability to lift at least 50 pounds and be comfortable with climbing up step ladders. Experience: Bachelor's Degree, or equivalent level of experience in related field 1 years' work experience as a Network Administrator installing, configuring, maintaining, and troubleshooting network, data center and security technologies. 2+ years as a level 1 helpdesk technician triaging reported issues and incidents by customers. Experience managing or troubleshooting all Windows desktop and Windows Server (2012-Current) versions. Experience managing or troubleshooting with Office 365 Exchange online and Microsoft Exchange 2013-Current. Experience with any of the following firewalls and remote access VPNs: Cisco AnyConnect, Meraki, Sonicwall, Fortinet, etc. Experience with a ticketing system, such as ConnectWise Manage Experience supporting virtual desktop environments: Multi-Server Remote Desktop Server farm w/ Secure Gateway is preferred. Experience working with and providing support utilizing Remote Management Tools. Certificates, Licenses, Registrations: CompTIA A+, Microsoft Windows, Apple mac OS certification, Cisco Certifications not required but would be a plus ITS offers a full benefits package, including: Rich Medical and prescription plans Dental & Vision Paid Holidays and Flexible Paid Time Off 401K/401K Roth with Safe Harbor matching Stock Appreciation Rights Company-paid life insurance, long-term and short-term disability insurance Company-paid mental health support & financial wellness services FSA for medical and dependent care HSA option with compatible medical plan Company-paid training, materials, and exams Performance-based bonuses IT Solutions is an equal employment opportunity employer that provides opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Calpine Corporation is America's largest generator of electricity from natural gas and geothermal resources with operations in competitive power markets. Its fleet of 77 power plants in operation represents over 27,000 megawatts of generation capacity. Through wholesale power operations and its retail businesses, Calpine serves customers in 22 states and Canada. Its clean, efficient, modern and flexible fleet uses advanced technologies to generate power in a low-carbon and environmentally responsible manner. The company was established on the premise that a strong commitment to the environment is inextricably linked to excellence in power generation and corporate responsibility. Since its founding in 1984, Calpine has led the power industry in its unwavering commitment to environmental stewardship. In addition, its renewable geothermal plants use steam generated deep below the earth's surface to produce clean, renewable electricity. Job Summary (includes but is not limited to the following, other duties may be assigned) This supervised position will allow for a college student who is seeking a career in the power industry to apply as well as enhance their knowledge with regard to all aspects of power plant operations. This position will require the individual to work a normal day shift and will report to the Operations and Maintenance Managers at the Calpine Bethpage Energy Center and Stony Brook Power Plant. Job Responsibilities * Utilizing plant data systems to access equipment performance and reliability * Updating maintenance documentation and work management system * Assist plant staff with special projects as needed. * Perform other duties as assigned while under the direct supervision of a Calpine employee. * Report to Operations and Maintenance Manager and take day-to-day instructions, both written and verbal Job Requirements * Pursuing a degree in Engineering or related field at an accredited college or university, preferably Mechanical or Electrical Engineering. * Completion of at least 30 credits towards graduation. * GPA of 3.0 or higher. * Legally eligible to work in the United States now and in the future for any company. * Willingness to work outdoors, in field locations, in a "hands on" environment. * Willingness to adhere to plant safety standards, procedures, and practices. * Good comprehension of basic engineering practices. * Good problem solving and analytical ability. * Strong computer skills especially in the use of spreadsheet and word processing programs. * Strong verbal and written communication skills. * Good organization skills and attention to details are essential * Must be flexible and able to work harmoniously with others in a dynamic environment. * Must be able to self-start and manage multiple simultaneous tasks and priorities. * Must have reliable transportation to and from work. Salary Information $23.00 to $33.00 per hour Additional Calpine Information * Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individuals with Disabilities. * Calpine is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with physical and/or mental disabilities. If you are interested in applying for employment and need special assistance or an accommodation to use our website or to apply for a position, please send an e-mail with your request to *************************. Determination on requests for reasonable accommodation are made on case-by-case basis. Please view Equal Employment Opportunity Posters provided by OFCCP here

The Senior Casting Technology Manufacturing Engineer provides technical leadership for SX or equiax investment castings across the value stream. You will partner with suppliers and cross-functional teams to drive root cause problem solving, improve producibility, increase productivity, and deliver on business objectives. You will own supplier technical relationships, coach on internal processes/specs/methods, qualify new suppliers, and help develop and industrialize alternate casting technologies. **Job Description** **Roles and Responsibilities** + Provide process and product technical leadership for the Castings commodity, including SX or equiax investment castings. + Develop strong working relationships with casting supplier technical teams. + Partner with suppliers to identify and implement corrective actions to eliminate the cause and prevent recurrence. + Act as a change agent to advance world-class performance and standard work across the supply base. + Own supplier technical relationships; mentor suppliers on GE Aerospace processes, specifications, and methods; ensure compliance and capability. + Lead cross-functional problem solving, to identify true root cause and implement sustainable corrective and preventive actions. + Improve manufacturability through design-for-casting, specification clarity, and process capability improvements. + Clearly communicate progress, risks, challenges, and countermeasures to leadership and stakeholders. + Review and approve significant/special processes; ensure adherence to standards and qualification requirements. + Collaborate with Quality and Design Engineering to ensure new and changed processes meet established metrics; align with other commodities on strategy and objectives + Partner with suppliers and internal teams to interpret drawings/specifications, ensuring conformance and clarity. + Identify and onboard new suppliers; lead technical qualifications and readiness through Manufacturing and Quality Planning reviews and support supplier Castings Audits. + Ability to travel to supplier sites 30%-50% **Minimum Required Qualifications** + Bachelor's degree in Engineering (Materials/Metallurgy, Mechanical, Manufacturing, or related field) + Minimum of 5 years of materials engineering, castings, mechanical engineering or a related field **Desired Characteristics and Experience** + Additive manufacturing experience. + Metal Injection Molding (MIM) experience. + Proficiency with Siemens NX or comparable CAD. + Sand Castings Experience. + Titanium Experience. + Significant experience in investment castings (SX or equiax), with demonstrated yield, capability, and cost improvements + Hands-on expertise across investment casting special processes (wax, shell, melt/solidification control, heat treat, HIP, NDT) and specification compliance. + Strong problem solving and project management skills. + New Product Introduction experience. + Experience maturing technologies and processes. + Excellent communication and stakeholder management; ability to influence without authority + Humble learner: Respectful, receptive to feedback, agile, and continuously improving; seeks out diverse perspectives. + Transparent communicator: Shares critical information proactively; speaks with candor; engages constructively to resolve issues. + Focused and accountable: Fast learner with strong ownership; meets commitments and drives results against SQDC targets ( _Safety, Quality, Delivery and Cost in that order)_ . **Pay and Benefits:** + The salary range for this position is $ 116,000.00 - 155,000.00. The specific salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. + GE provides a comprehensive benefits package that provides access to plans which support the overall wellbeing of our employees and their dependents. These benefits include, but are not limited to, health care coverage (medical, dental, vision, pharmacy), a retirement plan that includes Company Retirement Savings and a 401K with Company matching, Life Insurance options, Disability coverage, paid time-off, EAP, and more. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency (“RF”) components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards (“PCB”s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at *********** We are looking for a talented and highly motivated individual to assist our engineering team to implement quality improvements for leading-edge products for military and space-based applications. Our Summer Engineering Internship Program offers students the opportunity to apply engineering skills in a dynamic and real-world environment. We are currently looking for an intern to support Quality Engineering. Scope: The Supplier Quality Engineering Intern will work for 10 weeks to help implement quality process improvements. Duties include design, layout, and improvement of assigned processes, monitoring overall process performance and developing solutions to a broad range of technical issues. The Supplier Quality Engineering Intern will collaborate across the organization on efforts involving process improvement and cost savings. Duties and Responsibilities: Work collaboratively in a team to implement quality process improvements and automation Collaborate with program mentors and champions to identify best methods for automating processes Utilizes a structured engineering approach to deploy best practices for process control and to improve yields Initiates and/or updates documentation of processes into work instructions, training guides and/or certification tests Provide regular (weekly) updates to program coordinator and corporate leads Compares existing Supplier Quality practices with external benchmarks and industry best practices and proposes appropriate improvements. Maintains knowledge on current industry standards Leads capital project efforts to resolve Quality and technology capability issues Present multiple project updates to the local leadership team and participate in a corporate wide trade show to executives and cross-functional leaders Participates in internal Quality reviews to ensure compatibility of processing techniques to meet customer needs Limited travel required for workshops and trade shows Essential Knowledge and Skills: Requires ability to read and interpret engineering drawings and specifications Project management and structured problem solving with the ability to make data-based and ethical decisions Eagerness to learn quickly Capability for designing and analyzing experiments utilizing statistical tools Excellent communication and interpersonal skills including strong verbal, writing and presentation skills Ability to lead and participate effectively in cross-functional teams Education and Experience: All candidates must be currently enrolled in a bachelor's degree engineering program at an accredited college or university having completed their sophomore year Candidates must have strong verbal and written communication skills and must be maintaining a 3.0 grade point average or higher Must have a background that would permit the U.S. Department of Defense to issue a Secret clearance, which includes US citizenship Experience in applying engineering concepts to solve problems #LI-CG1 Compensation: Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $44,042 - $69,615 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at *********** We are looking for a talented and highly motivated individual to assist our engineering team to implement quality improvements for leading-edge products for military and space-based applications. Our Summer Engineering Internship Program offers students the opportunity to apply engineering skills in a dynamic and real-world environment. We are currently looking for an intern to support Quality Engineering. Scope: The Supplier Quality Engineering Intern will work for 10 weeks to help implement quality process improvements. Duties include design, layout, and improvement of assigned processes, monitoring overall process performance and developing solutions to a broad range of technical issues. The Supplier Quality Engineering Intern will collaborate across the organization on efforts involving process improvement and cost savings. Duties and Responsibilities: * Work collaboratively in a team to implement quality process improvements and automation * Collaborate with program mentors and champions to identify best methods for automating processes * Utilizes a structured engineering approach to deploy best practices for process control and to improve yields * Initiates and/or updates documentation of processes into work instructions, training guides and/or certification tests * Provide regular (weekly) updates to program coordinator and corporate leads * Compares existing Supplier Quality practices with external benchmarks and industry best practices and proposes appropriate improvements. Maintains knowledge on current industry standards * Leads capital project efforts to resolve Quality and technology capability issues * Present multiple project updates to the local leadership team and participate in a corporate wide trade show to executives and cross-functional leaders * Participates in internal Quality reviews to ensure compatibility of processing techniques to meet customer needs * Limited travel required for workshops and trade shows Essential Knowledge and Skills: * Requires ability to read and interpret engineering drawings and specifications * Project management and structured problem solving with the ability to make data-based and ethical decisions * Eagerness to learn quickly * Capability for designing and analyzing experiments utilizing statistical tools * Excellent communication and interpersonal skills including strong verbal, writing and presentation skills * Ability to lead and participate effectively in cross-functional teams Education and Experience: * All candidates must be currently enrolled in a bachelor's degree engineering program at an accredited college or university having completed their sophomore year * Candidates must have strong verbal and written communication skills and must be maintaining a 3.0 grade point average or higher * Must have a background that would permit the U.S. Department of Defense to issue a Secret clearance, which includes US citizenship * Experience in applying engineering concepts to solve problems #LI-CG1 Compensation: Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $44,042 - $69,615 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Job DescriptionBenefits: 401(k) matching Competitive salary Free uniforms Health insurance Paid time off Collaborate with the design team to bring creative concepts to life in a technically feasible manner. Develop detailed technical drawings and specifications for retail window displays and pop ups. Ensure that all project builds are designed with Health and Safety at the forefront of your mind. Providing Build Drawings and CNC files. Liaising with Project Managers on project requirements and deadlines. - Work closely with the Production Team to ensure that designs can be efficiently and accurately produced. - Conduct regular quality checks on prototypes and final products to verify accuracy and adherence to design specifications. - Participate in meetings with clients to present technical drawings and discuss project requirements. Work closely with the design team whilst designing a project for a client. Ensuring that what is designed is achievable in project guidelines, budgets and timelines - whilst also thinking about whats best for the client. Identify opportunities to streamline processes, improve efficiency, and enhance the overall quality of drafting work. Proactively seek feedback and implement best practices to support ongoing learning and professional development. Qualifications: - 5+ years of experience in technical drafting for retail window displays and pop ups. - Must use SolidWorks or Inventor - Proficiency in CAD software such as SolidWorks or Rhino. - Strong understanding of manufacturing processes and materials. Excellent management skills with the ability to prioritize tasks and meet deadlines. Detail-oriented mindset with a focus on quality assurance and continuous improvement. - Strong communication and interpersonal skills to collaborate effectively with cross-functional teams. - Ability to problem solve and troubleshoot technical issues as they arise. - Knowledge of health and safety regulations in the retail industry. If you have a passion for creative design and a strong technical background, we invite you to apply for this exciting opportunity to lead a dynamic team in designing innovative retail displays.

Job Description About Us: Safe Flight, a leader in aviation safety and flight performance systems, was founded in 1946. The company pioneered the development of Stall Warning and Angle of Attack, Automatic Throttle Systems, Wind Shear Warning, and many other innovations in aircraft instrumentation, flight performance, and control systems for fixed and rotary winged aircraft. With product installed on over two-thirds of the world's aircraft, Safe Flight counts among its customers the majority of the world's aircraft manufacturers, more than 50 airlines, hundreds of operators of corporate jet aircraft and U.S. and International Armed Services. Safe Flight's benefits include employer-funded health care, on-site lunch program, 401K contribution, Wellness and Education Reimbursement, paid-time off and sick time, and various other programs. Duties/Responsibilities: Build test sets and cable assemblies from schematics and assembly drawings utilizing hole and SMT technology. Assist engineering in construction and rework of electromechanical prototypes. Perform routine calibration of electronic instruments and coordinate outside calibration for equipment that cannot be calibrated in-house. Work with engineering to troubleshoot equipment. Perform other related duties as assigned. Required Skills/Abilities: Associate degree in electronics, avionics, or a related field with a basic understanding of electronic circuit theory. Comfortable reading and editing schematics and drawings. Proficient in using computers with a strong drive to learn new tools to work effectively with engineering. Experience as an electronics technician in an ISO or AS9100 facility is preferred. Equal Opportunity Employer/Veterans/Disabled An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. #hc132978

Job Description Purpose and Scope: Gain professional experience in a manufacturing setting. Required Skills, Education and Experience: • Pursuing a Bachelor's degree in Mechanical or Manufacturing Engineering • Excellent verbal and written communication skills • MS Office proficient • Experience with group work environments

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role description: Arcadis is currently seeking a Water Engineer Intern to join our Water Business Line in our White Plains, NY office! We work to protect our natural environment and water resources, while powering our world for future generations. Around the world, we're feeling the effects climate change, rapid urbanization, loss of biodiversity. The rate at which we're seeing large-scale, unforeseen events such as floods and wildfires, is becoming more frequent. We are here to protect our natural environment and water resources, while powering our world for future generations. Role accountabilities: As a Water Engineer Intern, you will have the opportunity to gain valuable experience and contribute to various projects related to water/wastewater/stormwater treatment and conveyance. Your responsibilities will include evaluating, planning, designing, and providing support for project management in areas such as pipelines and pumping facilities. You will also be involved in assessing, developing, and managing sustainability and resilience projects which will involved conducting vulnerability and mitigation assessments, as well as planning and designing for utilities, municipalities, and cities. In addition, you will perform fieldwork activities including site visits, sampling, water quality analyses, and technology evaluations. You will also contribute to troubleshooting and optimizing plant operations, and provide support for Asset Management projects. This will involved conducting data analytics, performing operational and organizational assessments, condition assessments, and overall performance evaluations of water/wastewater/stormwater facilities. In addition, you will be responsible for: Supporting preparation of reports, presentations, and other audio-visual materials, and participate in client meetings. Ensuring project compliance with all Arcadis practices and quality, health and safety standards, and facilitating coordination for timely completion and submission of projects on time and budget. Working independently and as part of a team, with the flexibility to accommodate collaboration with team members across the U.S. and internationally. Learning and using digital tools to enhance customer experience, team and client collaboration, and project delivery including configuration and deployment of SharePoint, Building Information Modeling (BIM), Power BI, and Augmented Reality. Qualifications & Experience: What skills do you need? Strong attention to detail, organization skills, and work ethic. The initiative and ability to take on new projects and other challenges regularly. Excellent communication skills, both written and verbal. Self-motivated, team-oriented and flexible, with the ability to balance and address new challenges as they arise. Exceptional analytical and problem-solving skills. Knowledge of engineering concepts, theories, and practices related to water/wastewater/stormwater. Proficient in Microsoft Office Excel, Word, and PowerPoint. Required Qualifications: Pursuing a BS in Civil, Environmental, or Water Resources Engineering, or another closely related academic discipline. Preferred Qualifications: Prior internship or coursework in water/wastewater, water resources, or related sectors. EIT certification. Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Join Arcadis. Create a Legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for part-time, as-needed positions. These benefits include EAP, 401K, and optional well-being benefits. The salary range for this position is $25.81 - $38.72.

STV is seeking a Construction Engineering Office Engineering Specialist for our Transportation department based in our New York, NY office. Responsibilities: Ensure compliance with contract documents, specifications, and regulatory requirements through review and verification of contractor submissions. Manage and maintain project documentation, including RFIs/RFCs, submittals, daily reports, and change orders. Coordinate and review material sampling and testing to ensure compliance with project specifications and CTDOT standards, track material certifications and test results. Assist in coordinating project schedules, tracking progress, and maintaining accurate records of construction activities. Support field inspection teams by providing technical guidance, resolving issues, and ensuring compliance with project requirements. Communicate effectively with agency representatives, engineers, contractors, and other project stakeholders to facilitate project success. Required Qualifications: Bachelor's degree with a minimum of 5 of years of experience in construction engineering and inspection MTA-ADA-PKG3 Upgrades & Elevator Replacements MTA C&D regarding sequence of field and/or construction activities Familiarity with CE&I processes, contract administration, and construction documentation. Proficiency in Bluebeam Revit, A-Site,PMIS, eBuilder, BIM software, Primavera P6, Procore MTA NYC Track Safety Certification Strong organizational, communication, and problem-solving skills. Valid driver's license and ability to work on-site as needed. Preferred Qualifications: Prior NY CE&I experience OSHA 10 Hour Construction Training Working knowledge of Compass and AASHTOWare project (AWP) #LI-Onsite Compensation Range: $82,265.06 - $109,686.74 Don't meet every single requirement? Studies have shown that women and people of color are less likely to apply to jobs unless they meet every single qualification. At STV, we are fully committed to expanding our culture of diversity and inclusion, one that will reflect the clients we serve and the communities we work in, so if you're excited about this role but your past experience doesn't align perfectly with every qualification in the job description we encourage you to apply anyways. You may be just the right candidate for this or other roles. STV offers the following benefits • Health insurance, including an option with a Health Savings Account • Dental insurance • Vision insurance • Flexible Spending Accounts (Healthcare, Dependent Care and Transit and Parking where applicable) • Disability insurance • Life Insurance and Accidental Death & Dismemberment • 401(k) Plan • Retirement Counseling • Employee Assistance Program • Paid Time Off (16 days) • Paid Holidays (9 days) • Back-Up Dependent Care (up to 10 days per year) • Parental Leave (up to 80 hours) • Continuing Education Program • Professional Licensure and Society Memberships STV is committed to paying all of its employees in a fair, equitable, and transparent manner. The listed pay range is STV's good-faith salary estimate for this position. Please note that the final salary offered for this position may be outside of this published range based on many factors, including but not limited to geography, education, experience, and/or certifications.

At the New York Power Authority, you will be empowered to think big, do good, and transform the energy industry. We are a collaborative team of over 2,400 energy technologists, IT specialists, business experts, hydro engineers, and diverse professionals leading the energy revolution. With state-of-the-art technology, advanced research and development, a modernized infrastructure, and a focus on environmental, social and governance (ESG), we provide New Yorkers with low-cost, clean, reliable power - and we are well on the way to becoming the first end-to-end digital utility in the country. Mechanical Engineering is primarily responsible for the entire fossil fleet and balance of plant of the hydro facilities. This includes high and low energy systems including high pressure steam, pneumatic controls, system lube oils, fire suppression, aero-derivative solutions for power production, liquid and gaseous fuel systems, governor control systems, advance monitoring systems of pressure, temperature, and flow rates, protective coating systems, and crane lifting and hoisting devices. Our paid 10-week Summer Developmental Internship program runs from June 2 - August 7, 2026. As an Intern, you will receive professional development, on-the job experience in the energy industry, exposure to executives, and networking opportunities to help build a solid foundation for your future career. Applications will close on February 15, 2026. If you are passionate about our mission - to lead the transition to a carbon-free, economically vibrant New York through customer partnerships, innovative energy solutions, community engagement and the responsible supply of affordable, clean, and reliable electricity, we are looking for you! #LI-KM1 Responsibilities Participate in department-specific projects, analysis, research methods and learn project management skills Support team in developing business solutions that contribute to NYPA's VISION2030 strategic goals Research industry trends and emerging technologies to contribute to the continuous improvement of our programs Other projects as assigned; will vary based on focus area Knowledge, Skills and Abilities Proficiency in Microsoft Office programs, especially Excel, PowerPoint, Outlook Excellent verbal and written communication skills Strong organizational skills and ability to multi-task with competing priorities Ability to work both independently and collaborate as part of a team Provide positive customer service for internal and external stakeholders Education, Experience and Certifications Enrollment in an associate's, undergraduate or graduate program at a college or university is required. Recent graduates are not eligible for our Developmental Internship program. Must be legally eligible to work in the United States for the duration of the internship from June 2 - August 7 Physical Requirements The New York Power Authority is committed to providing fair, competitive, and market-informed compensation. The hourly rate for this position is based on the level of education at the time the intern program begins: LEVEL HOURLY RATE Sophomore $17.50 Junior $21.50 Senior (or May 2027 graduate) $21.50 Current graduate/law student $24.50 The New York Power Authority and Canal Corporation believes that diversity, equity, and inclusion drive our success, and we encourage women, people of color, LGBTQIA+ individuals, people with disabilities, members of ethnic minorities, foreign-born residents and veterans to apply. As an equal opportunity employer, NYPA/Canals is committed to building inclusive, innovative work environments with employees who reflect communities across New York and enthusiastically serve them. We proudly celebrate diversity and do not discriminate based on race/color, creed/religion, national origin, citizenship or immigration status, age, disability, military status, gender/sex, sexual orientation, gender identity/expression, pregnancy and related conditions, familial/marital status, domestic violence victim status, predisposing genetic characteristics, arrest/criminal conviction record or any other category protected by law. NYPA/Canals will also provide reasonable accommodations during the hiring process related to candidates' disabilities, pregnancy-related conditions, religious observances/practices and/or domestic violence concerns. To request an accommodation, please email accessibility@nypa.gov.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency (“RF”) components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards (“PCB”s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at *********** Job Description We are looking for talented and highly motivated individuals to assist our Systems Engineer team with the design and development of leading-edge products for military and space-based applications. Our Summer Engineering Internship Program offers students the opportunity to apply engineering skills in a dynamic and real-world environment in the following areas. The Systems Engineer Internship provides an opportunity to work with the lead engineer responsible for meeting technical requirements, which include: Essential Knowledge and Skills: Development of system requirements Overall system architecture Radar/IFF Mode design Performance Analysis Systems design definition and documentation Test and integration methodology and documentation Customer interface and field testing Education and Experience: Majoring in Electrical Engineering, Computer Engineering or similar Engineering Degree Studying Matlab. All candidates must be currently enrolled in a bachelor's degree program at an accredited college or university having completed their sophomore year. Candidates must have strong verbal and written communication skills and must be maintaining a 3.0 grade point average or higher. Must have a background that would permit the U.S. Department of Defense to issue a Secret clearance, which includes US citizenship. This internship is for Summer 2026. #LI-MP1 Compensation: Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $38,079 - $57,118 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.