Engineering technician jobs in East Wenatchee, WA

About the job About Us: EcoFlow was born out of the dream of a group of battery engineers in 2017. Amid the global transition towards renewable energy, we lead the way forward with industry-leading portable power products, solar technology, and smart home energy solutions. EcoFlow Europe is now actively participating in the innovation of residential energy storage and use technology, bringing Smart, Flexible and Reliable residential power solutions to thousands of homes. Our Vision: Our vision is to power a new world. It's a call to the future - an aspirational, technology-driven, eco-friendly future shared by everyone. Our Mission: Our mission from day one is to provide smart and eco-friendly energy solutions for individuals, families, and society at large. We are, were, and will continue to be a reliable and trusted energy companion for users around the world. Your career with us: At EcoFlow, we are all innovators with a diverse set of backgrounds, skill sets, interests and needs, united in the mission to Power a New World. At EcoFlow, you will: Find reliable peers, savvy mentors and see new career perspectives; Meet new challenges, solution possibilities and chances to show yourself; See wider, grow faster and to be outstanding. We're now looking for a Desktop Operation Engineer- Internship - ESS. This position is a full-time, on-site/position. Responsibilities: - Responsible for handling Help Desk tickets, providing on-site technical support and remote assistance to resolve user issues, and quickly responding to fault reports. - Responsible for preparing computers for new employees, recycling computers from departing employees, and handling daily IT issues. - Responsible for providing English support for daily documents, announcements, etc. - Responsible for IT asset management, including assisting with the procurement, warehousing, issuance, replacement, return, and other tasks related to IT assets. - Responsible for daily Audio&Video meeting support, make sure the device is ready for use. - Responsible for office network troubleshooting (alone or under the help of headquarters network engineers and system engineers). - Acceptable for short-term business trips. Qualification: 1. Technical Competency Requirements - Computer science major or relevant experience in desktop maintenance is preferred. - Should familiar with the use of mainstream operating systems (Windows 10/11, mac OS), if have experience in installation, configuration, and troubleshooting will be given priority. - Should familiar with office software support (including Microsoft Office, Mail Apps, and collaboration tools such as Teams/Zoom). - Should have basic knowledge of network and system troubleshooting commands, such as ping, tracert, and nslookup. - Familiarity with the use of audio-visual equipment (projectors, video conferencing, sound reinforcement, large screens, etc.) will be given priority. 2. Language Proficiency - Must have fluent Chinese,English and local language listening, speaking, reading, and writing skills, and be able to write English IT cases. What we offer: Competitive salary package; Travel allowance according to company policy; A positive and warm team with transparent information transferring; Clear career development path. Why EcoFlow: "EcoFlow is among a number of tech startups that have a particular strength that can make them competitive on the global stage." ----Bloomberg "The EcoFlow BLADE represents a new generation of mowers that dispense with the need for an electronic fence." ----The Wall Street Journal "The product was impressively well designed back then and the company's products have only gotten better." ----Forbes We are looking forward for your joining! Website: ************************ Social Media: Facebook | Twitter | Instagram | YouTube

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. At Boeing, we are all innovators on a mission to connect, protect, explore and inspire. From the seabed to outer space, you'll learn and grow, contributing to work that shapes the world. Find your future with us! Boeing Test and Evaluation (BT&E) is seeking a Instrumentation Technician C to join our teams in Seattle, WA. In this role, you will work with blueprints, schematics, technical manuals and bulletins, National Bureau of Standards, manufacturers' specifications, oral and written instructions. You will be installing instrumentation, primarily strain gauges and thermocouples on all models of Boeing aircraft civilian, military and space. Position Responsibilities: Receive work assignment from team leader or supervisor and obtain necessary materials and equipment Obtain appropriate engineering drawings and test documents, as required, for assignment if drawings, sketches, and documents are not with work assignment Fabricate wire or fiber optic bundles used to connect various types of test and computer equipment together or test sensing equipment used to monitor and measure, for the purpose of collecting and storing data during test Set up and perform qualification test, bench test, or automatic test as required per work assignment, test document, test equipment manuals, and/or engineering instructions Install fiber optic strain gages, thermocouples, accelerometers, and strain gages by soldering, bonding, spot welding, or using mechanical fastening devices Use a scissor or boom lift to access areas for instrumentation installation this work is performed both inside hangars and outside on airfields Perform modification of test equipment to meet engineering configuration, as required Select proper hand, power, and/or bench tools needed to perform required operation, such as screwdrivers, pliers, torque wrenches, crimpers, cable tools, band saw, drill press, and sander, as required Use shop tools and any test equipment required to complete work assignment Write tie-ins, and maintain records such as work log for areas/equipment as required Devise and/or build shop aids and work around methods as necessary to test/troubleshoot systems Handle and protect components and assemblies such as static sensitive equipment in accordance with shop procedures and drawing requirements Handle and dispose of hazardous materials (ketone, naphtha, alcohol, epoxy, acids) in approved manner (in accordance with Safety Data Sheets) using personal protective equipment as required Pack electronic equipment for travel as required per drawing and Boeing applicable specifications Check work after completion of each operation to be sure job is per drawing or other instructions Put completed job or reworked job up for inspection as required Contact team leader/supervisor/engineer/planner when assistance is needed (e.g. if there is questions about drawings or paperwork, if drawings and paperwork do not match, or when any other problem arises) Maintain personal and tool certifications, as required Comply with applicable tool control policies Effectively accomplishing the tasks, duties and responsibilities of this job requires at least these attributes Ability to use precision measuring tools and test equipment and interpret results Knowledge of routing, clamping, tying, connecting and terminating wires and/or wire bundles in electrical systems and assemblies, per the appropriate electrical codes Knowledge of aircraft electrical and mechanical systems Ability to calculate and apply advanced mathematics Know and interpret data from a coordinate system to identify multiple axis and dimensional references (3-D) Ability to set up and operate floor mounted hydraulic and/or mechanical operated equipment Ability to demonstrate entry level competency in operation of PIT (Power Industrial Trucks), in a safe manner as required Ability to safely operate various types of hand tools and/or hand-held power tools as required Effectively communicate information Knowledge of basic electricity and electrical systems Operate various types of test equipment, perform testing and interpret results, as required Knowledge of proper use, handling, and disposal of hazardous materials/chemicals, oils, coolants, and lubricants per government regulations and Boeing procedures Travel up to 10% of the time, both domestically and internationally. The following Physical Demands may be requirements of this job: Frequent (3-6 Hrs.) Carrying less than 10 pounds; Climbing/balancing (stairs, ladders, poles, scaffold); Finger manipulation (keyboarding, other); Flexion/Extension (head bent down, head bent back); Handling (holding, grasping); Lifting less than 10 pounds; Reaching (overhead); Rotation of head/neck; Sitting; Standing; Walking Occasional (1-3 Hrs.) Bending at the waist; Carrying 10-35 pounds; Twisting at the waist; Use of low impact vibratory tools (drilling/sanding); Lying down (back, side, front); Operating of foot controls; Pushing/pulling 10-35 pounds; Pushing/pulling less than 10 pounds; Kneeling; Lifting 10-35 pounds; Crawling; Crouching (squatting) The following Chemicals/Materials may be requirements of this job: Frequent (3-6 Hrs.) Metals (aluminum, brass, iron, Monel, nickel, steel); Plastics (acrylic, fiberglass, graphite, resins); Sealants (latex, polysulfide, silicon); Solvents (acetone, turpentine, MEK, MPK, Isopropho); Adhesives (epoxy, acrylonitrile, organic rubber) Occasional (1-3 Hrs.) Alkalis (acid neutralizers, strong detergents); Liquid Coatings (etching mask, lacquer, penetrant d); Acids (boric, muriatic, nitric, hydrochloric) The following Environmental Conditions may be requirements of this job: Continuous (6-8 Hrs.) Noise (constant or intermittent sounds or pitch) Frequent (3-6 Hrs.) Nonionizing Radiation (sub-radio frequency, radio); Elevated Platforms (wings, lifts, cranes, ladders); Extreme Heat (ovens and furnaces) Occasional (1-3 Hrs.) Atmospheric Conditions (fumes, noxious odors, dust); Confined Spaces; Welding Equipment (Arc/Cutting, Flux-Cored, Gas-Me) The following Personal Protective Equipment may be requirements of this job: Continuous (6-8 Hrs.) Face/Eye Protection (safety glasses, goggles); Fall Protection (safety belts, harnesses, lifeline); Protective Footwear (steel-toed shoes, rubber boot) Frequent (3-6 Hrs.) Protective Headwear (welding helmets, hard hats); Hand/Arm Protection (gloves, arm protectors); Hearing Protection (ear inserts, canal caps, earmuff) This position is expected to be 100% onsite. The selected candidate will be required to work onsite at the listed location. This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Basic Qualifications (Required Skills/Experience): 1+ year of experience reading and interpreting wire harness diagrams and installation schematics 1+ year of experience in electrical (wire shop) fabrication and required processes Preferred Qualifications (Desired Skills/Experience): 3+ years of strain gaging experience 3+ years of experience in Aircraft Electrical systems Certification(s) in: Electrical (Crimping, Bond and Ground); Mechanical (Fork lift, Hand truck, Pressure/vacuum); or Safety (Electrical, Egress, Explosives) Shift: This position is for 1st shift. This position may require travel up to 10% of the time, both domestically and internationally. Union: This is an hourly position governed by the International Association of Machinist (IAM-751) Collective Bargaining agreement. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will be considered as this job is not installed in QTTP. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: $27.32/hour - $57.88/hour Applications for this position will be accepted until Jan. 10, 2026 Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

We are seeking a highly skilled Data Center Technician to support and maintain our Mac-based compute infrastructure and associated data center environments. The ideal candidate will have hands-on experience managing Mac devices at scale, ensuring uptime, optimizing performance, performing OnDemand upgrades/downgrades, and supporting production workloads. This role requires a solid understanding of networking fundamentals, especially switching technologies used in modern data centers. This is a hybrid role, with responsibilities split between Mac hardware operations (80%) and network operations support (20%). Key Responsibilities: Primary - Mac/Server Infrastructure Operations (80%) Deploy, rack, cable, and maintain Mac Studio, Mac Pro, Mac Mini, and similar Apple hardware in the data center. Perform diagnostics, troubleshooting, and repairs on Apple devices (hardware and basic OS-level issues). Manage device imaging, configuration, firmware updates, and lifecycle operations. Monitor system health, handle incident response, and support operational uptime SLAs. Maintain accurate asset records, labeling, inventory, and documentation. Work closely with platform/engineering teams to support CI/CD, build pipelines, and workloads running on Mac fleets. Perform iLO administration for HP and Dell machines. Secondary - Data Center & Networking Support (20%) Assist with installation, configuration, and troubleshooting of network switches (Arista, Juniper, etc.). Perform structured cabling (fiber and copper), patching, tracing, and labeling. Participate in switch upgrades, port provisioning, VLAN configurations, and basic L2 troubleshooting. Support network connectivity for compute hardware, out-of-band management, PDUs, and KVM components. Collaborate with network engineering to escalate and resolve complex issues. Ensure compliance with data center standards: airflow, cable management, rack power distribution, and space planning. Required Qualifications: 3+ years of experience in data center operations or hardware support roles. Hands-on experience with Mac hardware (Mac Studio, Mac Mini, Mac Pro) in production or lab environments. Strong understanding of racking, stacking, cabling, and general data center best practices. Working knowledge of network switches, Ethernet standards, and basic L2 protocols. Experience with ticketing systems, documentation, and asset tracking tools. Ability to lift and move equipment (up to ~50 lbs) and work in data center environments. Preferred Qualifications: Familiarity with Jamf and automation workflows for Mac devices. Basic knowledge of TCP/IP, VLANs, link aggregation, and network troubleshooting. Experience with remote management tools (IPMI, iDRAC, Lights Out, etc.). Understanding of OS imaging, basic scripting (Python/Bash), or automation. Past experience supporting build farms, developer infrastructure, or similar environments. Awareness of Agile practices and familiarity with ServiceNow or Wolken ticketing systems. Soft Skills: Strong communication and documentation abilities. Excellent problem-solving and troubleshooting skills. Ability to work independently and collaborate across engineering, networking, and data center teams. Highly organized with the ability to manage multiple tasks simultaneously.

This is an 100% Onsite Role in Kent, WA. We are seeking a highly skilled Data Center Technician to support and maintain our Mac-based compute infrastructure and associated data center environments. The ideal candidate will have hands-on experience managing Mac devices at scale, ensuring uptime, optimizing performance, OnDemand upgrade/downgrades, and supporting production workloads. In addition, this role requires a solid understanding of networking fundamentals, particularly switching technologies used in modern data center environments. This is a hybrid role where responsibilities are split between Mac hardware operations (primary) 80% and network operations support (secondary) 20%. Required Skills: 3+ years of experience in data center operations or hardware support roles. Hands-on experience with Mac hardware (Mac Studio/Mini/Pro) in production or lab environments. Strong understanding of racking, stacking, cabling, and general data center best practices. Working knowledge of network switches, Ethernet standards, and basic L2 protocols. Experience with ticketing systems, documentation, asset tracking tools. Ability to lift and move equipment (up to ~50 lbs) and work in data center environments. Responsibilities: Primary - Mac/Server Infrastructure Operations Deploy, rack, cable, and maintain Mac Studio, Mac Pro, Mac Mini or similar Apple hardware in the data center. Perform diagnostics, troubleshooting, and repairs on Apple devices (hardware and basic OS-level issues). Manage device imaging, configuration, firmware updates, and lifecycle operations. Monitor system health, handle incident response, and support operational uptime SLAs. Maintain accurate asset records, labeling, inventory, and documentation. Work closely with platform/engineering teams to support CI/CD, build pipelines, and workloads running on Mac fleets. Ilo administration for HP and Dell Machines Secondary - Data Center & Networking Support Assist with installation, configuration, and troubleshooting of network switches (Arista, Juniper, etc.). Perform structured cabling (fiber and copper), patching, tracing, and labeling. Participate in switch upgrades, port provisioning, VLAN configurations, and basic L2 troubleshooting. Support network connectivity for compute hardware, out-of-band management, PDUs, and KVM components. Work with network engineering to escalate and resolve complex issues. Ensure compliance with data center standards: airflow, cable management, rack power distribution, and space planning. Preferred Qualifications: Familiarity with Jamf, automation workflows for Mac devices. Basic knowledge of TCP/IP, VLANs, link aggregation, and network troubleshooting. Experience with remote management tools (IPMI, iDRAC, Lights Out, etc.). Understanding of OS imaging, basic scripting (Python/Bash), or automation is a plus. Past experience supporting build farms, developer infrastructure, or similar environments. Should be aware of Agile practices and Servicen-now/Wolken ticketing system aware. Our Fortune Technology client is ranked as one of the best companies to work with in the world. As a global leader in 3D design, engineering, and entertainment software, they foster a progressive culture, creativity, and a flexible work environment using cutting-edge technologies.

Space is a critical domain, connecting our technologies, our security and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more- we can innovate, invest, inspire and integrate our capabilities to transform the future. At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We're creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security vision. We're erasing boundaries and forming partnerships across industries and around the world. We're advancing spacecraft and the workforce to fuel the next generation. And we're reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you. This Metrologist role is designed to build on your metrology capabilities while providing continued development to enhance your skills for future opportunities and advancement within Lockheed Martin. This position is on Naval Base Kitsap Bangor in Silverdale, WA, working in a Navy Calibration Laboratory in support of the Fleet Ballistic Missile (FBM) Program. This position offers shift flexibility, company provided training, with some travel required. In this position, you will: Provide support for Calibration Laboratory technical processes: Provide training and technical guidance; develop training materials; develop local calibration procedures; develop uncertainty budgets/analyses; develop hardware and software proofing packages; create and revise report of calibrations; maintain National Voluntary Laboratory Accreditation Program (NVLAP) accredited parameters; and participate in the Intra-Laboratory Comparison Program. Provide support for Calibration Laboratory administrative processes: Perform laboratory standard Out of Tolerance Notification (OTN) analysis and dispositions; conduct review and respond to Quality audits with root cause and corrective actions; draft and/or review Calibration Problem Reports (CPR) and submit to approval authority; review and approve special calibration requests; and support Strategic Systems Programs life cycle support 5-year standards/modernization forecasting for revision or replacement of lab standards. Provide support for development of Calibration Technicians: Submit quarterly associate technician performance reviews; conduct metrology math / suitable substitution exams with associate technicians preparing for advancement; monitor technician training depth and cross-training; and review/revise vendor training requirements. Provide support for external organizations: Monitor and respond to shared metrology resource email inbox; support engineering Trouble Failure Inspection Rejection Reports (TFIRR); support inquiries from customers and Local Government Representatives; review controlled document revisions; represent Calibration Laboratory during SSP, NAVSEA, and other external meetings and events; and lead guided laboratory tours as requested by local SWFPAC management. Benefits of Employment: Our employees play an active role in strengthening the quality of life where we live and work by volunteering more than 850,000 hours annually. Here are some of the benefits you can enjoy: •Medical •Dental •401k •Paid time off •Work/life balance •Career development •Mentorship opportunities Learn more about Lockheed Martin's competitive and comprehensive benefits package. Basic Qualifications Bachelor of Science Degree in a technical field such as Engineering, Mathematics, or Physics with at least 1 year of metrology work experience; or minimum 5 years of work experience in a Metrology Laboratory with a diversity of disciplines and capabilities such as: pressure, gas detection, force, torque, dimensional, optics, temperature, humidity, microwave, waveform, or electrical standards. Experience with ISO/IEC 17025 accreditation. Proficient using computers and major components of MS Office suite. Good verbal & written communication skills and effective interpersonal skills to engage with a team and/or lead a team. You will need to be a U.S. Citizen and be able to obtain and maintain a U.S. DoD Security Clearance to support this government contract. No clearance is required to apply. An interim Secret clearance is required prior to start. Desired skills Specific experience within the Metrology areas of Optical/Dimensional and Temperature/Humidity. Experience performing calibrations onboard Naval vessels and familiarity with the associated Navy documents required to perform calibrations in that environment. Familiarity with METCAL, PMEL, or TMDE metrology programs. Ability to develop metrology measurement techniques and procedures. DoD METCAL, PMEL, or TMDE training. Strong math skills. Experience with teaching, mentoring, or coaching. Electronics and microwave calibration experience/training. Experience with Fluke Metcal, National Instruments LabView, SureCal, or other automated calibration programming platforms. Solid understanding of ISO/IEC 17025:2017 and experience being assessed to it. Active security clearance. Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. * At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Other Important Information By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to work remotely Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Work Schedule Information Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Security Clearance Information This position requires a government security clearance, you must be a US Citizen for consideration. Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $70,100 - $123,625. For states not referenced above, the salary range for this position will reflect the candidate's final work location. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. (Washington state applicants only) Non-represented full-time employees: accrue at least 10 hours per month of Paid Time Off (PTO) to be used for incidental absences and other reasons; receive at least 90 hours for holidays. Represented full time employees accrue 6.67 hours of Vacation per month; accrue up to 52 hours of sick leave annually; receive at least 96 hours for holidays. PTO, Vacation, sick leave, and holiday hours are prorated based on start date during the calendar year. This position is incentive plan eligible. Pay Rate: The annual base salary range for this position in most major metropolitan areas in California, Massachusetts, and New York is $80,600 - $139,840. For states not referenced above, the salary range for this position will reflect the candidate's final work location. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. This position is incentive plan eligible.

Mindlance Inc. We are a national recruiting company which partners with many of the leading employers in the Financial Services, Banking, Life Sciences and IT sectors Role: Mechanical Engineering Technician Duration: 6+Months Location: DuPont, WA Job Description: The Mechanical engineering technician will validate mechanical engineers designs, assist in developing test plans, and ensure the correct validation procedures are being followed on tools utilized in the validation process. They may make sketches and rough layouts, record and analyze data, make calculations and estimates, and report their findings to engineers and engineering teams. Candidate will assist in the development of CPU thermal/mechanical solutions for various server and workstation market segments by working with a team of cross-site architects, mechanical, thermal, and electrical engineers. They will be testing thermal mechanical solutions according to the test plans. Technician will also managed the calibration tools used in the validation process and manage lab activities. Minimum Qualifications: You must possess a two year technical degree in a related discipline and/or more than five years of experience in related field Knowledge of 3D CAD tools like Creo or Solidworks. Knowledge of mechanical fundamentals. Knowledge of computer layouts and basic architecture. Familiarity with general lab testing procedures such as basic instrumentation, data acquisition, fixture design, etc. Demonstrated hands on ability with common tools. Familiarity with common manufacturing & design processes such as: sheet metal, plastic injection molding, machining, die casting, cold forming, etc. is a plus Additional Information Thanks & regards Praveen K. Paila ************

Title: Associate Engineer (Full Time | Multiple Location Options) About Lamb Weston You've probably enjoyed our fries without even knowing it! As a leading manufacturer in our industry, and public Fortune 500 company, we inspire and bring people together with foods they love and trust. Our customer base includes international food service providers, restaurants, and households in over 100 countries around the world. A highly innovative global corporation with a start-up mindset, we empower every individual to make a genuine difference. You'll gain access to hands-on training to fuel your growth and success, explore opportunities for new solutions, and you'll join a winning team of 10,000+ people all dedicated to raising the bar - together. If you have a strong drive for results, a desire to help us bring the world together through our fries, and are ready for a fresh challenge, we want to hear from you. Summary Follows prescribed procedures and, under direct supervision, conducts analyses to develop design options or recommendations for structures, systems and components. Collaborates with more experienced engineers to provide follow-up and engineering assistance on defined problems. Prepares or assists in preparing reports, graphs, planning layouts, and summaries designed to communicate project progress or results. Job Description * Assigned to a training program that would last one to two years, depending on when the employee completes the Process Quality (PQ) Certification Program; * Will be required to complete Foundations of Leadership and the PQ Training Programs and would be required to complete the PQ Certification; * Will be assigned Engineering and/or Maintenance projects; * Will be mentored by the Plant Engineering Manager, Project Engineer and Production Manager; * Will be tasked with monitoring production to insure that safety, quality and cost standards are maintained; * Responsible for evaluating subordinate performance, communicating with employees and providing information for work performance improvement. Basic & Preferred Qualifications * Bachelor's degree in Engineering or a closely related field with 1-3 years' experience or a Master's degree with 0-1 year's experience. * Excellent communication, interpersonal, problem solving and organizational skills. * Proficient in MS Office, with a high emphasis in Excel. * Must be detail orientated. * Excellent technical and analytical skills. * Ability to work weekends and/or shift work with a strong work ethic and employment history * 1-2 years production processing or supervisory experience preferred * Previous experience in a food processing environment preferred In compliance with applicable state and local laws, Lamb Weston has opted to include a reasonable estimate of the compensation for this role. This compensation is specific to this position and takes into account a number of variables. Actual compensation may be higher or lower in the range posted based on various factors, including, but not limited to, job duties, experience and expertise. A candidate's work location could also impact the actual compensation being outside of the range to reflect local cost of labor. A reasonable hourly estimate of the range for this role based on the variables previously mentioned is: $32.44 - $48.65 Industry-Competitive Benefits Coupled with our compensation and bonus incentive programs, our benefits deliver rewards that are market competitive. Some of the most attractive elements of our benefit programs include: * Health Insurance Benefits - Medical, Dental, Vision * Flexible Spending Accounts for Health and Dependent Care, and Health Reimbursement Accounts * Well-being programs including companywide events and a wellness incentive program * Paid Time Off * Financial Wellness - Industry leading 401(k) plan with generous company contributions, Financial Planning Services, Employee Stock purchase program, and Health Savings Accounts, Life and Accident insurance * Family-Friendly Employee events * Employee Assistance Program services - mental health and other concierge type services Benefits may vary based on location, job role/level, job status, and/or the terms of any applicable collective bargaining agreements. Job Requisition ID: Req-222494 Time Type: Full time The anticipated close date is a good faith estimate for when this job will be closed. Some jobs may be unposted or filled earlier or later than the Anticipated Close Date depending on interview processes and business needs. Anticipated Close Date: 05/27/2022 Lamb Weston is an Equal Opportunity Employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status or any other protected factor under federal, state or local law

Convergint is looking for a full-time, enthusiastic, results driven and forward-thinking Security Technician to join our amazing culture. In this role, you will be responsible for installing, programming, system start-up/check-out, certification, and related customer training on assigned Fire, Security, and/or Building Automation projects including small to large projects that vary in complexity. Also delivers assigned projects effectively and within budgeted cost and time schedules. Acts as key interface for technical support with the customer and maximizes customer satisfaction. May mentor less-experienced staff. As a Security Technician, you are a part of a dynamic team that allows you to grow as Convergint grows. For information about how we use your personal information, please see our Colleague & Applicant Privacy Notice, available on convergint.com/careers. The expected compensation range for this position is $42/hr to $47/hr, depending on experience. Who You Are You have a passion for providing world-class service to customers, colleagues and communities. You are a person of integrity with a commitment to growth, accountability and delivering results. You want to join an organization with a positive culture that embraces equal opportunity and allows everyone to be the best version of themselves at work and home. You want to grow with us and deliver results as an exceptional Security Technician. Who We Are With 20-years of proven growth and exceptional performance, our mission is to be our customer's best service provider. We realize the importance of diversity in achieving that goal. Our company was built upon a solid foundation of 10 Values and Beliefs which drive our unmatched culture, making us the #1 global, serviced-based systems integrator in the industry. We take great pride in protecting the lives and assets of our customers and their communities with the solutions we provide. What you'll do with “Our Training and Your Experience” Convergint's greatest strength is our people! Every colleague is encouraged to participate in our Recruit Awesome People program, helping us grow Convergint by promoting our colleague-first culture and referring top talent to the Talent Acquisition Team and hiring managers. Installs, programs, tests, repairs, and services a substantial variety of systems and equipment which may include security, fire alarm & life safety, and/or building automation. Colleague is key interface for the provision of technical support and training for the customer and as such is accountable for maximizing customer satisfaction. Assignments are broad in nature and may require a high level of ingenuity and proficiency. Reads complex blueprints, schematics, manuals, and other specifications to determine installation requirements; Interprets manuals, schematics, and wiring diagrams, and repairs equipment, utilizing knowledge of electronics and using advanced test instruments and hand tools. Operates systems to demonstrate equipment, commission new systems, analyze performance and identify malfunctions. Writes non-routine programs of substantial variety and complexity for systems. Acts as “our customer's best service provider” at all times thereby ensuring Convergint is the customer's first choice for service. Takes ownership of onsite project including safety, quality and performance. May provide custom systems integrations, detailed systems upgrade planning and execution, systems audits and consultation, and/or database management and manipulation. May install, configure, and support a variety of network systems and equipment for assigned projects. Consults with engineering personnel to resolve unusual problems in system operation, maintenance, and warranty work. Performs all work in accordance with Federal, State and local regulations as well as company health and safety policies and procedures. Uses solid troubleshooting skills to isolate and fix problems in malfunctioning equipment or software. May advise management regarding customer satisfaction, product performance, installation techniques and standards as well as suggestions for product improvements. Participates or assists with developing customer presentations or similar new business development activities. Executes all the technical aspects of multiple projects with varying timelines and budgets including, preparation of project deliverables such as submittals/shop drawings/training documentation, programming, graphics development, start-up, certification testing, customer training, close-out documentation, and on-going technical support etc. Identifies potential project risks, communicates to appropriate parties and assist in the development and implementation of strategies to minimize impact and to control deviations from estimated costs and project deadlines. Works closely with the Project Manager and/or Operations Manager and assists in the overall coordination of specific projects including supervision and oversight of subcontractors and installation work; makes recommendations regarding quality of work and potential changes in scope, and identifies ways to continuously improve customer satisfaction. Using technical knowledge, skills and experience, mentors and trains less experienced staff. May supervise workers in testing, tuning, and adjusting equipment to obtain optimum operating performance. Provides performance feedback to management regarding Project Specialist I and II. Performs other duties and responsibilities as requested or required. What You'll Need Exceptional customer focus and ability to regularly work under pressure; consistent ability to maintain awareness of, and seek to meet the needs and wants of the customer without being prompted. Strong technical skills and experience related to building automation systems, fire alarm systems, and/or electronic security systems; may adapt procedures, processes, tools to meet the more complex requirements of the job. Advanced mechanical and electrical aptitude and ability to read blueprints and drawings; advanced math skills (for some positions, this may include calculating area, velocity, resistance, voltage, etc.). Highly proficient computer skills including familiarity with MS Office applications (Outlook, Word, Excel). Company Benefits Convergint fosters a supportive, accessible, and inclusive environment in which all individuals are able to realize their maximum potential within the company. We offer a variety of programs and exceptional benefits: 10 Company Holidays and Paid Time Off starting at 13 days annually Fun & Laughter Day Off Medical, Dental & Vision Plan Life insurance & Disability Plan Wellness Program 401K Matching Plan Colleague Assistance Program Tuition reimbursement Competitive salary and compensation plan Vehicle reimbursement plan or company vehicle Corporate Social Responsibility Day Cell phone reimbursement (if applicable) Paid parental leave Requirements: Education: College degree, trade school or equivalent experience Minimum Required Experience: 5-7 years relevant experience in 1 or more of the following industries: electronic, fire alarm & life safety, and/or building automation WA State Low Voltage License (EL06) Preferred Experience: (but not required): Experience installing Milestone or Lenel systems Convergint is an Equal Opportunity Employer. Visit our Convergint careers site to learn more about the company and the exciting opportunities available. Please note that this job posting includes salary information for the assigned target market range within the primary geographic region the requisition is posted. If the position is posted in multiple locations or is a remote position, the salary range may vary. Individual pay rates will, of course, vary depending on the job, department, and location, as well as the individual skills, experience, certifications, specific licenses, and education of the applicant.

Janicki Industries is an innovative, family-owned aerospace company located at the foot of the Cascades. We focus on engineering and manufacturing complex projects for companies in the aerospace, defense, and space industries. We are looking for a Mechatronics Technician to join our growing team. This position is located on-site in Sedro Woolley, WA. POSITION DESCRIPTION The Mechatronics Technician will be responsible for the repair, maintenance, and troubleshooting of complex automated systems, including CNC machines, PLCs, pneumatic, hydraulic, and electrical systems. The ideal candidate will have a passion for hands-on problem-solving, a solid understanding of mechatronic systems, and the ability to work with both mechanical and electrical components. The essential functions of a Mechatronics Technician are: Perform repair and maintenance of CNC machines with a strong focus on troubleshooting. Install, write logic, and troubleshoot PLC systems with a solid understanding of PLC technology. Apply knowledge of NC programming for machine operations. Troubleshoot and repair pneumatic and hydraulic components. Work with electrical systems, including 24V and 120V, ensuring proper functionality and safety. Gain exposure to robotics and automation systems to enhance efficiency. Read and interpret blueprints, diagrams, and electrical drawings for troubleshooting and installations. Utilize basic NX CAD skills for design and maintenance tasks. Assist in the development and execution of a preventive maintenance program to ensure equipment reliability. Performs other duties as assigned Behavior: The incumbent must work well under pressure, meeting and completing multiple deadlines. The incumbent shall, at all times, demonstrate cooperative behavior with colleagues and supervisors Being at work on time and maintaining good attendance is a condition of employment and is an essential function of your job QUALIFICATIONS Due to our ITAR and EAR regulations, applicants must be a US Citizen or of Legal Permanent Resident Status as defined by 8 U.S.C. 1324b (a) (3). This position requires the ability to obtain a U.S. Secret Security Clearance (U.S. Citizenship Required). Janicki will assist with gaining this access once employed. Special Access Program or other Government Access Requirements are mandatory for this position and requires candidate agreed to enter a Continuous Evaluation program. EDUCATION/EXPERIENCE Associates degree in Manufacturing Engineering Technology, Instrumentation, Mechatronics, Composite/Material Science, Industrial Design Technology, or similar technical field preferred All positions required at least a high school diploma/GED. 1-5 years of experience in the field or in a related area is preferred, depending on level. Must be familiar with Microsoft Office products and SAP; some experience with Catia and/or Unigraphics is desirable. Basic NX CAD skills required. Familiar with CNC processes including CAM software, tool path methods, and work holding/fixtures is preferred. Industrial Robotics Specialist certification is a plus. Must be familiar with a variety of the fields' concepts, practices, and procedures. Must be able to rely on extensive experience, problem-solving skills, and judgment to plan and accomplish goals. Must have effective verbal and written communication skills in the English language. ADDITIONAL INFORMATION Wage range for this role is between $22 - $48 an hour plus a discretionary bonus, 401(k) matching, vacation, and health benefits. Employees can also receive additional pay for off-shifts, off-site work, and access pay. The range provided is Janicki's estimate of the base compensation for this role. Actual amount offered will be based on job-related and non-discriminatory factors such as experience, location, education, training, skills, and abilities BENEFITS Medical, dental, and vision insurance with employer contribution Disability insurance as well as Life/AD&D insurance HSA (Health Savings Account) with employer contribution and FSA (Flexible Savings Account) 401k with employer matching Paid time off and paid holidays (including two floating holidays) Education reimbursement program Several shift options Premium pay for off-shifts Premium pay for security clearance if applicable Not sure that you'll be the perfect fit for this role? You should still apply! We'll review your application for other opportunities. We are always on the lookout for talented people! Janicki Industries is an Equal Opportunity Employer. Janicki Industries does not discriminate on the basis of race, color, religion, sex, national origin, sexual orientation, marital or familial status, physical or mental disability, genetic information, age, retaliation, veteran/military service status, or any other legally protected status. Janicki is proud to be a military friendly employer. Applicants or employees wishing to view a copy of Janicki Industries' Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify the Human Resources Department at **************. As a federal government contractor and a recipient of federal funding, Janicki is required to abide by federal drug testing requirements (including preemployment drug testing for cannabis). Additionally, because of Janicki's work on aerospace products and the high volume of safety sensitive positions, Janicki takes the safety of its employees very seriously and requires that employees pass a preemployment drug test prior to starting employment.

BAS Controls Technician - Wenatchee, WA - $42.00-$58.00/hr - Commercial HVAC & Building Automation About the Opportunity A growing Building Automation and HVAC Controls contractor is seeking a skilled BAS Controls Technician to support commercial, industrial, and institutional projects throughout the Wenatchee region. This role involves hands-on BAS/DDC installation, commissioning, troubleshooting, and service work across a variety of facility types. Position Details Title: BAS Controls Technician Location: Wenatchee, WA (local travel required) Employment Type: Full-Time Compensation & Benefits Hourly Rate: $42.00 - $58.00/hr (Based on Experience) Overtime: Available Vehicle: Company vehicle or vehicle allowance, depending on role Medical, Dental, and Vision Insurance Short-Term & Long-Term Disability 401(k) Retirement Plan with Company Match Paid Holidays & Paid Vacation Ongoing technical training and certification support About the Role The BAS Controls Technician will work on the installation, startup, and optimization of DDC/BAS systems for HVAC equipment including RTUs, AHUs, boilers, chillers, VAV systems, and heat pumps. This role is well-suited for a technician who enjoys fieldwork, problem solving, and improving building performance. Key Responsibilities Install, configure, and commission BAS/DDC systems for commercial HVAC applications Perform point-to-point checkout, functional testing, and verification of control sequences Troubleshoot system issues including controllers, networks, sensors, actuators, and field devices Install low-voltage wiring, conduit, terminations, and control panels Assist with programming adjustments under direction of senior technicians or engineers Support equipment startup with mechanical contractors and facility teams Document work performed, redline drawings, and maintain accurate service reports Coordinate daily tasks with project managers and job site personnel Provide customer support and represent the company professionally on job sites Ideal Candidate Profile Experience as a BAS Controls Technician or Controls Installer Strong understanding of HVAC fundamentals and sequences of operation Ability to read control drawings, wiring diagrams, and mechanical plans Familiarity with BAS platforms such as Tridium Niagara, Distech, Siemens, Johnson Controls, or Delta is a plus Comfortable working in commercial, healthcare, K-12, and industrial environments Strong troubleshooting and communication skills Reliable, safety-minded, and able to work independently or within a field team How to Apply If you have BAS/DDC controls experience and are looking for a strong opportunity within the Wenatchee market, please submit your resume. Qualified candidates will be contacted for next steps.

In this role you will lead and perform inspection, testing, troubleshooting, maintenance, repair, and start-up of low and medium voltage electrical distribution equipment, including breakers, transformers, switches, switchgear, relays, and motor control centers, as well as other electrical apparatus both in the field and in a shop environment. An understanding of sophisticated electrical distribution systems as well as the use of complex electrical test equipment is required. You will contribute to a safe working environment for co-workers and customers and help ensure the overall success of projects. Local, regional, and national travel is required, ability to travel internationally is preferred. Responsibilities + Perform acceptance and maintenance testing on electrical power distribution systems and equipment, including transformers, switchgear, circuit breakers, and protective relays. + Conduct insulation resistance testing, power factor testing, contact resistance testing, and other tests in accordance with NETA standards. + Analyze test results to determine the condition of equipment and recommend corrective actions if needed. + Strong understanding of electrical power distribution systems, including experience with transformers, switchgear, circuit breakers, and protective relays. + Proficiency in using electrical testing equipment such as insulation resistance testers, power factor meters, contact resistance testers, and relay test sets. + Knowledge of NETA standards, NFPA 70E, and OSHA safety regulations. + Coordinate, lead, and support multiple projects both onsite and in-house utilizing various company software systems, review and maintain job documentation, ensuring completeness of information from receipt of order to invoice. + Perform testing of low and medium voltage cables, instrument and power transformers, switchgear, breakers, electro-mechanical and solid-state relays, and other electrical apparatus. + Contain material costs by eliminating wasteful practices and implementing appropriate control measures. + Rotate emergency on-call duty and if called respond to customer emergencies in a timely manner. + Promote an attitude of continuous improvement and teamwork. Qualifications + Applicants selected must hold a minimum of 5+ years of relevant electrical experience with a High School Diploma/GED + Possess a valid/active U.S. Work Authorization **Expectations of Expertise & Knowledge:** + NETA / NICET certification (preferred) or equivalent hands-on experience in electrical testing. + Strong understanding of ANSI, IEEE, NETA, NFPA, NEC, and OSHA electrical safety standards. + Ability to interpret electrical schematics, wiring diagrams, and technical manuals. + Proficiency in operating and troubleshooting protective relays, circuit breakers, transformers, switchgear, and other electrical equipment. + Experience with test equipment such as Doble, Omicron, Megger, Vanguard, and Fluke meters. + Understanding of insulation resistance, power factor, contact resistance, and high-potential (Hi-Pot) testing procedures. + Knowledge of medium and high-voltage systems (up to 500kV), including arc flash hazard analysis. + Strong troubleshooting and analytical skills with the ability to diagnose system failures. + Willingness to travel as needed and work in industrial, data center, and utility environments. + Ability to work safely under minimal supervision and follow industry best practices. + Perform **acceptance and maintenance testing** of electrical power systems, ensuring compliance with NETA standards + Conduct protective relay testing, calibration, and programming for various manufacturers. + Perform circuit breaker and switchgear testing, including timing tests, primary and secondary injection testing. + Troubleshoot electrical faults and perform root cause analysis for system failures. + Conduct transformer testing, including turns ratio, insulation resistance, and power factor testing. + Ensure adherence to electrical safety protocols, including lockout/tagout (LOTO) procedures and PPE compliance. + Maintain detailed test reports and documentation for compliance and client review. + Collaborate with engineers, project managers, and clients to ensure efficient system commissioning and startup. + Provide mentorship and technical guidance to junior technicians as needed. **Desired / Advantageous Qualifications:** + OEM certified field service training program. **We offer an excellent benefits package including:** + A competitive salary + Medical, dental, vision, life, and disability insurance + Paid time off + Tuition reimbursement + 401k Retirement Plan + Military Reserve pay offset + Paid maternity leave **Abilities:** + The position requires the ability to lift, carry, and move objects weighing up to [50 pounds] on a regular basis. Candidates must demonstrate physical strength and stamina to perform various tasks, including but not limited to, loading, and unloading, operating equipment, and assisting in the transportation of various materials. Proper lifting techniques and safety protocols must be followed to ensure personal and team safety. + Relocates a 12-foot stepladder without assistance. + Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders. + Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis. + Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English. + May use a standard ladder without exceeding the weight limit while carrying tools. + Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. + Apply general rules to specific problems to produce answers that make sense. + Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events). + See details at close range (within a few feet of the observer). + Listen to and understand information and ideas presented through spoken words and sentences. Pay Range USD $30.00 - USD $48.00 /Hr.

The Senior Casting Technology Manufacturing Engineer provides technical leadership for SX or equiax investment castings across the value stream. You will partner with suppliers and cross-functional teams to drive root cause problem solving, improve producibility, increase productivity, and deliver on business objectives. You will own supplier technical relationships, coach on internal processes/specs/methods, qualify new suppliers, and help develop and industrialize alternate casting technologies. **Job Description** **Roles and Responsibilities** + Provide process and product technical leadership for the Castings commodity, including SX or equiax investment castings. + Develop strong working relationships with casting supplier technical teams. + Partner with suppliers to identify and implement corrective actions to eliminate the cause and prevent recurrence. + Act as a change agent to advance world-class performance and standard work across the supply base. + Own supplier technical relationships; mentor suppliers on GE Aerospace processes, specifications, and methods; ensure compliance and capability. + Lead cross-functional problem solving, to identify true root cause and implement sustainable corrective and preventive actions. + Improve manufacturability through design-for-casting, specification clarity, and process capability improvements. + Clearly communicate progress, risks, challenges, and countermeasures to leadership and stakeholders. + Review and approve significant/special processes; ensure adherence to standards and qualification requirements. + Collaborate with Quality and Design Engineering to ensure new and changed processes meet established metrics; align with other commodities on strategy and objectives + Partner with suppliers and internal teams to interpret drawings/specifications, ensuring conformance and clarity. + Identify and onboard new suppliers; lead technical qualifications and readiness through Manufacturing and Quality Planning reviews and support supplier Castings Audits. + Ability to travel to supplier sites 30%-50% **Minimum Required Qualifications** + Bachelor's degree in Engineering (Materials/Metallurgy, Mechanical, Manufacturing, or related field) + Minimum of 5 years of materials engineering, castings, mechanical engineering or a related field **Desired Characteristics and Experience** + Additive manufacturing experience. + Metal Injection Molding (MIM) experience. + Proficiency with Siemens NX or comparable CAD. + Sand Castings Experience. + Titanium Experience. + Significant experience in investment castings (SX or equiax), with demonstrated yield, capability, and cost improvements + Hands-on expertise across investment casting special processes (wax, shell, melt/solidification control, heat treat, HIP, NDT) and specification compliance. + Strong problem solving and project management skills. + New Product Introduction experience. + Experience maturing technologies and processes. + Excellent communication and stakeholder management; ability to influence without authority + Humble learner: Respectful, receptive to feedback, agile, and continuously improving; seeks out diverse perspectives. + Transparent communicator: Shares critical information proactively; speaks with candor; engages constructively to resolve issues. + Focused and accountable: Fast learner with strong ownership; meets commitments and drives results against SQDC targets ( _Safety, Quality, Delivery and Cost in that order)_ . **Pay and Benefits:** + The salary range for this position is $ 116,000.00 - 155,000.00. The specific salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. + GE provides a comprehensive benefits package that provides access to plans which support the overall wellbeing of our employees and their dependents. These benefits include, but are not limited to, health care coverage (medical, dental, vision, pharmacy), a retirement plan that includes Company Retirement Savings and a 401K with Company matching, Life Insurance options, Disability coverage, paid time-off, EAP, and more. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Who We Are At nLIGHT, we are constantly on the cutting-edge of laser technology in a massively growing market. We are a leading provider of high-power semiconductors and fiber lasers for industrial, microfabrication, and aerospace & defense applications, to name a few. Our lasers are changing not only the way things are made, but also changing the things that can be made. Headquartered in Camas, Washington, nLIGHT is a publicly listed company (NASDAQ: LASR). Work closely with a cross-functional engineering team to develop next-generation industrial fiber laser components and systems. The successful candidate will: * Conduct initial proof-of-concept experiments * Build and characterize prototypes * Develop and document processes and tooling * Assist in transferring products to manufacturing, including training of operators * Maintain equipment, organize materials and supplies, and ensure safe operation of development labs * Troubleshoot problems in the development lab and the factory Desired Qualifications: * Associates Degree or higher in lasers, optics, electronics, or another engineering discipline, or equivalent experience in related technologies * Experience with high power lasers, optics, and fibers * Experience with tools and equipment for fiber processing and inspection * Experience supporting engineers working with lasers, fiber optics, electro-optic or opto-mechanical devices, or electronics * Meticulous attention to detail, highly organized, self-motivated * Experience with electronics and test equipment, including oscilloscopes, digital multimeters, power meters, CCD cameras or beam profilers, spectrum analyzers, etc. * Good written and verbal communication skills * Demonstrated problem-solving skills * Familiarity with mechanical drawings and basic tooling * Experience with Excel and data-analysis software * Training or experience in Six Sigma, Lean Manufacturing, Statistical Process Control, and Design of Experiments nLIGHT is proud to offer comprehensive COMPENSATION AND BENEFITS: * Starting level and pay depends on qualifications: * Engineering Technician I: $23.41 - $29.30 per hour * Engineering Technician II: $25.49 - $33.10 per hour Other Compensation and Benefits * Target Cash Bonus with potential payout of up to 2% of earned wages * 120 hours of paid Vacation per year, plus paid Sick Leave and 10 paid Holidays * Eligible for health benefits on the 1st day of the month after your start date * Medical, Dental and Vision Benefits, including prescription and orthodontia with employee-paid premiums as low as $40.00 per pay period * Company paid Short-Term and Long-Term Disability, and Life & AD&D Insurance * Employee Assistance Program * Aflac Supplemental Insurance * Flexible Spending and Health Savings Accounts * Employee Stock Purchase Plan * 401(k) with company match and immediate vesting * Jury Duty and Bereavement Leave Pay * Tuition Assistance * Pet Insurance nLIGHT is subject to US Export Control regulations. To qualify for this position, you must be a US Person (that is, a US citizen, lawful permanent resident, or protected individual granted asylum or refugee status). Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, or age. For more information about our commitment to equal employment opportunity, please see this government poster: Know Your Rights: Workplace Discrimination is Illegal. If you are an individual with a disability and need a reasonable accommodation in the application or hiring process, please contact Human Resources at ************** or *************. E-Verify Participation: nLIGHT participates in the E-Verify program. This employer will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS) with information from each new employee's Form I-9 to confirm work authorization. For more information, please review the following notices: * E-Verify Participation Poster * Right to Work Poster

Start the day excited to make a difference…end the day knowing you did. Come join our team. The Biomedical Equipment Technician I (BMET I) provides clinical equipment services under the supervision of BMET II and BMET III. Responsibilities include validation and inspection of clinical equipment for completeness, mechanical and electrical safety, and proper operation. The BMET I performs planned maintenance inspections, calibrations, and repairs of general biomedical equipment. The BMET I assists other technicians in the troubleshooting and major repair of complex equipment. Essential Functions & Responsibilities: Assists in performance assurance inspections, scheduled maintenance, electrical safety inspections, and operation verification procedures of general biomedical equipment. Assists in electrical safety tests on general biomedical equipment using specialized test equipment and instrumentation. Assists in the support of a systematic preventative maintenance program of biomedical equipment. Performs a variety of routine tasks associated with the installation, service and calibration of a diverse range of therapeutic and diagnostic biomedical instrumentation. Assembles, repairs and maintains mechanical, electrical and basic electronic devices according to specifications. Provides general technical assistance and instruction to Mary Washington Healthcare personnel in the operation and maintenance of equipment. Communicates and uses appropriate customer relation skills with physicians, patients, families, and Mary Washington Healthcare Associates in person and via phone. Maintains accurate and timely documentation for medical equipment records. Installs, maintains, services, modifies, troubleshoots and calibrates a variety of diagnostic, therapeutic and life support devices by interpreting engineering and vendor information, schematic diagrams and graphic illustrations. Meets all departmental performance indicator standards as established by Mary Washington Healthcare for regulatory requirements. Develops and implements a plan for professional growth. Maintains a clean and safe work environment. Performs all other duties as assigned. Qualifications: Associates Degree in Electronics or Biomedical Equipment Technology preferred. 6 months experience in electronic, mechanical or electromechanical repair or equivalent required. As an EOE/AA employer, the organization will not discriminate in its employment practices due to an applicant's race, color, religion, sex, sexual orientation, gender identity, national origin, and veteran or disability status. Required Physical Requirements: Constant (67-100% of workday) use of arms and hands; frequent (34-66% of workday) standing, walking, sitting, bending, squatting; ability to lift 35 lbs.; ability to push and pull 20 lbs.; auditory and visual skills Mental Requirements: Possesses critical thinking and analytical skills. Ability to multi-task. Ability to communicate effectively and collaborate with a multi-disciplinary team. Environmental Requirements and Exposure Hazards: Potential risk of exposure to radiation and toxic chemicals. “It is the policy of Mary Washington Healthcare to provide reasonable accommodations to qualified individuals with a disability who are applicants for employment or Associates.”

Get to know The Pokémon Company International The Pokémon Company International, a subsidiary of The Pokémon Company in Japan, manages the property outside of Asia and is responsible for brand management, licensing, marketing, the Pokémon Trading Card Game, the animated TV series, home entertainment, and the official Pokémon website. Pokémon was launched in Japan in 1996 and today is one of the most popular children's entertainment properties in the world. Learn more online at corporate.pokemon.com and pokemon.com. Get to know the role * Job Title: Automated Retail Technical Operations Engineer * Job Summary: As an Automated Retail Technical Operations Engineer, you will be a key player in ensuring the seamless operation of our vending machine network. Leveraging your extensive experience in support operations and automated retail, you will provide expert-level remote troubleshooting, diagnostics, and technical guidance. You will collaborate closely with field technicians, merchandisers, and our various vendors to resolve complex issues. This position requires someone with the ability to analyze machine performance data and drive continuous improvement throughout our support processes. * FLSA Classification (US Only): Exempt * People Manager: No What you'll do Data Analysis & Insights * Collect, analyze, and interpret machine performance data to uncover trends, root causes, and opportunities for proactive maintenance and innovation System Integration & Optimization * Support the integration and continuous improvement of key systems (e.g., Salesforce CRM, Kiosk 360) * Enhance data flow, user experience, and operational efficiency across platforms * Implement and refine proactive monitoring strategies to identify and address potential machine problems before they impact service Process Optimization * Identify and implement improvements, automation opportunities, and efficiency gains within the support function * Develop and maintain comprehensive documentation and training materials to empower the support team and field technicians Kiosk Network Health & Troubleshooting * Monitor and maintain the performance of our nationwide kiosk network * Lead remote diagnostics and resolution of complex technical issues to minimize downtime and maximize customer satisfaction Advanced Ticket Management * Manage escalated and complex support tickets with a focus on resolution speed and technical accuracy Vendor Collaboration * Partner with software and field vendors to resolve complex issues and advocate for product enhancements What you'll bring * Five (5) to seven (7) years of relevant professional experience or a demonstrated equivalent level of expertise preferably within the automated retail, vending machine industry, or technology-based company. * In-depth knowledge of vending machine technology, hardware, software, and networking such as UPS, switches, hubs, etc. * Strong data analysis and reporting skills using tools like Power BI or Tableau. * Proven track record of working effectively on cross-functional teams and collaborating with vendors. * Advanced proficiency in using remote diagnostic and troubleshooting tools. * Experience with Microsoft Azure environments, Windows domains, and InTune remote PC configuration and management to create solutions and streamline processes. * Experience with process automation and scripting is a plus. Base Salary Range: For this role, new hires generally start between $105,000.00 - $124,000.00. The full range is $105,000.00 - $157,000.00 per year. This range is applicable for the labor market where the role is intended to be hired. The final base salary is directly related to the candidate's qualifications and professional experience uniquely. #LI-JL1 #LI-Hybrid How you'll be successful * Passion for Pokémon: Develops an understanding of the Pokémon brand, the impact it has on our people, culture, business, fans, and communities, and applying that knowledge and passion to everything you do. * Challenging the Expected: Approaches challenges with curiosity and creativity, embracing the possibility of failure as an opportunity to learn something new, develop innovative ideas, solve complex problems and identify unique opportunities. * Integrity and Respect: Demonstrates integrity and respect by leading with empathy, listening to others, seeking out different perspectives, and taking personal responsibility for decisions, actions, and results. * Dedicated to Quality: Takes ownership to maintain and promote high standards, looks for new ways to learn and improve, and embraces a growth mindset to seek and apply feedback from others in an effort to continuously improve. * Building Relationships: Develops and strengthens relationships, adopting a "team first" mentality and working collaboratively to solve problems and meet shared goals. * Delighting Customers: Listens and understands the interests and needs of our customers and stakeholders, making them feel heard and important, and embracing these learnings to continue delivering a unique Pokémon experience. What to expect * An innovative culture driven by impact, delivering meaningful outcomes. * Company events that celebrate the spirit of Pokémon. * Competitive cash-based compensation programs. * 100% employer-paid healthcare premiums for you. * Generous paid family leave. * Employer-paid life insurance. * Employer-paid long and short-term income protection insurance. * US Employees: 401k Employer Matching. * UK/IRE/MX Employees: Pension Employer Contributions. * Fitness reimbursement. * Commuter benefit. * LinkedIn learning. * Comprehensive relocation package for certain roles. * Hybrid work environment. The above statements are intended to describe the general nature and level of work being performed by people assigned to this role. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required. Employees may be required to perform duties outside of their normal responsibilities from time to time, as needed. For roles in the United Kingdom, candidates will need the right to work. In some cases, and for some roles, the Company may be able to arrange a visa. For roles in Ireland, this role requires candidates to have the right to live and work in the Republic of Ireland. However, we welcome applications from all nationalities and may consider supporting an employment permit application, in appropriate and suitable cases. The Pokémon Company International is committed to the inclusion of all qualified applicants for consideration in our job application process. If you require reasonable accommodation to complete a job application, pre-employment testing, or a job interview, or to otherwise participate in the hiring process, please contact the Talent Acquisition team at accommodationrequest_**************.

Closing Date to Apply: Until Filled Salary: Engineer I: $72,737.60 - $112,028.80 Engineer II: $86,569.60 - $139,380.80 Engineer III: $97,323.20 - $156,707.20 Typically, selected candidates are hired at a salary rate between the minimum and midpoint of the range. Benefits: This link below will provide you with Grant PUD's benefit that may be available if hired, different employee types are eligible for different benefits. Grant PUD - Unified Insurance Program (uip-wa.org) Grant County PUD will administer a background check as part of the hiring process, if selected for this position. Position Summary The Telecommunication Engineer focused on the District operational technology (OT) infrastructure. Expert in designing, configuring and deploying networks critical to utility operations. Strong focus on security measures to protect OT systems from cyber threats, ensuring the confidentiality, integrity, and availability of critical infrastructure. Essential Functions Essential functions, as defined under the Americans with Disabilities Act, may include any of the following representative duties, knowledge, and skills. This is not a comprehensive listing of all functions and duties performed by incumbents of this class; employees may be assigned duties which are not listed below; reasonable accommodation will be made as required. The job description does not constitute an employment agreement and is subject to change at any time by the employer. Essential duties and responsibilities may include, but are not limited to, the following: General (applies to all levels) Maintain accurate documentation, policies, and standards related to OT infrastructure and telecommunications systems. Support compliance with regulatory, safety, and operational requirements. Actively participate in all aspects of the District's safety program. Understand and adhere to compliance requirements for this position that may include laws, regulations, security guidelines, and District policies. Perform related duties as required or assigned. Perform related duties as required or assigned. Demonstrated commitment to Grant PUD's mission, vision, values, strategic plan, and Grant PUD / IBEW Local 77 Code of Excellence. The incumbent should be familiar with these organizational priorities and behave in a way that aligns with these expectations. Understand and adhere to compliance requirements for this position that may include laws, regulations, security guidelines, Grant PUD policies & Procedures. In this position, if needed to operate a GPUD vehicle for business purposes, please refer to the Vehicle/Asset Usage Policy, IS-TA-POL-001. Actively participate in all aspects of our safety program, including but not limited to: Following all safety policies and procedures. Alerting supervisors and coworkers to unsafe or hazardous working conditions. Reporting any safety incidents or close calls within 24 hours to your supervisor. Accepting feedback from supervisors and coworkers regarding your own safety performance. Telecommunications Engineer I: Learn how to design, configure, and deploy OT systems, including ICS, SCADA, PLCs (Programmable Logic Controllers), and HMIs (Human-Machine Interfaces). Learn troubleshooting methods for OT networks and devices to ensure continuous operations in utility and industrial environments. Learn how OT systems integrate with IT networks, using industrial protocols such as Modbus, DNP3, OPC, and MQTT. Assist in documenting OT system configurations, standards, and operating procedures. Learn how to implement basic security measures to protect OT systems from cyber threats. Participate in risk assessments and vulnerability reviews with guidance from senior engineers. Respond to OT-related incidents under supervision, ensuring swift recovery and minimal impact on operations. Telecommunications Engineer II: Collaborate with team members to design, configure, and deploy OT systems and supporting networks. Maintain and troubleshoot OT networks and devices to ensure system reliability and availability. Collaborate on integrating OT and IT systems securely, ensuring interoperability and compliance with standards. Implement security measures (firewalls, intrusion prevention, access controls) to protect OT infrastructure. Conduct risk assessments to identify vulnerabilities and recommend mitigation strategies. Monitor OT system performance using predictive analytics and real-time monitoring tools. Prepare reports on system performance, incidents, and compliance for stakeholders. Collaborate with IT, engineering, and operations teams to align OT infrastructure with organizational goals. Support disaster recovery testing and business continuity planning for OT systems. Telecommunications Engineer III: Design and lead implementation of OT systems, including ICS, SCADA, PLCs, HMIs, and secure OT networks. Serve as a subject matter expert on OT cybersecurity and compliance standards (IEC 62443, NIST, ISO 27001). Lead troubleshooting and resolution of complex OT issues, coordinating with operations and IT teams. Develop and oversee security strategies to protect critical OT infrastructure from cyber threats. Conduct and lead risk assessments, audits, and compliance evaluations for OT systems. Lead disaster recovery and business continuity planning and testing for OT infrastructure. Provide expert guidance to operations managers, plant operators, and engineering staff on OT best practices. Develop and maintain detailed documentation, including system configurations, security protocols, and performance reports. Coordinate with vendors and external partners for equipment procurement, upgrades, and security reviews. Telecommunications Engineer I-Operational Technology: Required Qualifications (Education, Experience, Licenses & Certifications): Bachelor's Degree in Engineering, Technology other relevant degree or additional 2 years of relevant experience in lieu of degree O to 2 (two) years of beginning level experience with OT systems, ICS, SCADA, PLS or related infrastructure. Preferred Qualifications (Education, Experience, Licenses & Certifications): Utility experience or critical infrastructure experience Certifications such as Cisco Certified Network Associate (CCNA), or relevant OT/ICS certifications. Telecommunications Engineer II-Operational Technology: Required Qualifications (Education, Experience, Licenses & Certifications): Bachelor's Degree in Engineering, Technology or additional 2 years of relevant experience in lieu of degree 3 (three) yeas of progressively responsible experience in OT system design, standards implementation or industry system security. Preferred Qualifications (Education, Experience, Licenses & Certifications): Utility experience or critical infrastructure experience Certifications such as Cisco Certified Network Associate (CCNA), CompTIA Network+, or industry recognized OT cybersecurity certifications (GISCP, ISA/IEC) Telecommunications Engineer III-Operational Technology: Required Qualifications (Education, Experience, Licenses & Certifications): Bachelor's Degree in Engineering, Technology or additional 2 years of relevant experience in lieu of degree 6 (six) yeas of progressively responsible experience OT infrastructure design, deployment and cybersecurity. Preferred Qualifications (Education, Experience, Licenses & Certifications): Utility or critical infrastructure experience. Advanced certifications such as, Cisco Certified Network Associate (CCNA), CompTIA Network+, Cisco Certified Network Professional (CCNP), or OT specific certifications. Other Knowledge, Skills & Abilities Knowledge of common application development patterns, including, but not limited to, Software Engineering best practices for all applicable technology, client-server architecture, service applications, object-oriented, and object-based software design Skill in problem-solving and thinking critically Independently adapting, interpreting, and applying written guidelines, precedents, and standardized work practices to a variety of unprecedented and problematic situations Written and oral interpersonal communication; workflow and time management Utilizing MS office products; specialized software, tools, and applications Physical Requirements Position may be eligible for hybrid work arrangement: ☒Yes ☐No Majority of work is performed in a standard office setting. Will perform work onsite at the locations of the assigned Business Units Typical shift of employees in this position: ☒8 hours ☒9 hours ☒10 hours ☐12 hours *For a full list of requirements, the applicant/incumbent should refer to the Physical Capacity Evaluation (PCE). The statements contained herein reflect general details as necessary to describe the principal functions for this job, the level of knowledge and skill typically required, and the scope of responsibility, but should not be considered an all-inclusive listing of work requirements. Individuals may perform other duties as assigned, including work in other functional areas.

Site: The General Hospital Corporation Mass General Brigham relies on a wide range of professionals, including doctors, nurses, business people, tech experts, researchers, and systems analysts to advance our mission. As a not-for-profit, we support patient care, research, teaching, and community service, striving to provide exceptional care. We believe that high-performing teams drive groundbreaking medical discoveries and invite all applicants to join us and experience what it means to be part of Mass General Brigham. Biomedical Technician I at Newton Wellesley Hospital Job Summary Summary Maintains and assists in medical equipment management by installing, calibrating, repairing, and inspecting medical equipment. Does this position require Patient Care? No Essential Functions -Inspects newly acquired medical devices and systems for safety and function and attaches and assigns appropriate control numbers and labels to medical devices. -Conducts complete performance assurance and electrical safety testing. Performs preventive/scheduled maintenance on medical devices as required. -Respond to medical equipment problems in clinical or research areas; evaluate, troubleshoot, and solve problems. -Performs equipment repairs to a level requiring generic test instrumentation or diagnostic software, e.g., to board or component level for electrical devices. -Participates in medical equipment evaluations, installations, and upgrades, including software revision. -Makes periodic rounds of assigned clinical areas to assess the operation of medical devices and systems. -Instructs department and other equipment technical staff on testing, calibration, preventive maintenance, basic troubleshooting, and medical equipment repair. -Documents inspections, repairs, maintenance procedures, and teaching activities. Qualifications Education Associate's Degree Biomedical Technician required Can this role accept experience in lieu of a degree? Yes Licenses and Credentials Class D Passenger Vehicle Driver's License [State License] - Generic - HR Only preferred Personal Drivers License (New Hampshire) - New Hampshire Division of Motor Vehicles preferred MGH Security RMV Check/Registry of Motor Vehicles Driving Report - MGB Internal preferred Experience Experience as a biomedical technician. 1-2 years preferred Knowledge, Skills and Abilities - Demonstrates and understands the importance of interpersonal and communication skills to effectively work with team members, front line staff and vendors. - Understands electrical and mechanical biomedical safety principles. - Ability to learn and perform maintenance and troubleshooting of medical devices involving appropriate test equipment and software diagnostic tools. - Ability to learn equipment maintenance, operating procedures, and repair procedures from training materials and courses. - Ability to use computer-based tools. Additional Job Details (if applicable) Physical Requirements Standing Constantly (67-100%) Walking Constantly (67-100%) Sitting Rarely (Less than 2%) Lifting Frequently (34-66%) 20lbs - 35lbs Carrying Frequently (34-66%) 20lbs - 35lbs Pushing Frequently (34-66%) Pulling Frequently (34-66%) Climbing Occasionally (3-33%) Balancing Constantly (67-100%) Stooping Occasionally (3-33%) Kneeling Occasionally (3-33%) Crouching Occasionally (3-33%) Crawling Occasionally (3-33%) Reaching Frequently (34-66%) Gross Manipulation (Handling) Constantly (67-100%) Fine Manipulation (Fingering) Frequently (34-66%) Feeling Constantly (67-100%) Foot Use Rarely (Less than 2%) Vision - Far Constantly (67-100%) Vision - Near Constantly (67-100%) Talking Constantly (67-100%) Hearing Constantly (67-100%) Remote Type Onsite Work Location 2014 Washington Street Scheduled Weekly Hours 40 Employee Type Regular Work Shift Day (United States of America) Pay Range $25.82 - $36.90/Hourly Grade 4 At Mass General Brigham, we believe in recognizing and rewarding the unique value each team member brings to our organization. Our approach to determining base pay is comprehensive, and any offer extended will take into account your skills, relevant experience if applicable, education, certifications and other essential factors. The base pay information provided offers an estimate based on the minimum job qualifications; however, it does not encompass all elements contributing to your total compensation package. In addition to competitive base pay, we offer comprehensive benefits, career advancement opportunities, differentials, premiums and bonuses as applicable and recognition programs designed to celebrate your contributions and support your professional growth. We invite you to apply, and our Talent Acquisition team will provide an overview of your potential compensation and benefits package. EEO Statement: The General Hospital Corporation is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religious creed, national origin, sex, age, gender identity, disability, sexual orientation, military service, genetic information, and/or other status protected under law. We will ensure that all individuals with a disability are provided a reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. To ensure reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Veteran's Readjustment Act of 1974, and Title I of the Americans with Disabilities Act of 1990, applicants who require accommodation in the job application process may contact Human Resources at **************. Mass General Brigham Competency Framework At Mass General Brigham, our competency framework defines what effective leadership “looks like” by specifying which behaviors are most critical for successful performance at each job level. The framework is comprised of ten competencies (half People-Focused, half Performance-Focused) and are defined by observable and measurable skills and behaviors that contribute to workplace effectiveness and career success. These competencies are used to evaluate performance, make hiring decisions, identify development needs, mobilize employees across our system, and establish a strong talent pipeline.

Begin your engineering career with hands-on experience working alongside Engineering industry leaders. RH2's Engineering Internship offers college-level students currently enrolled in Civil, Mechanical, Electrical, or Environmental Engineering programs a paid position that introduces students to consulting engineering focused on utility and infrastructure work for municipal clients. Your work will contribute and support RH2's planning, design, and construction administration of municipal drinking water and wastewater facilities. Such facilities include, water and wastewater pipelines, pump stations, storage reservoirs, and treatment plants. Also, as an Intern you'll train in AutoCAD and Civil 3D. Qualifications: Currently enrolled in a four-year Engineering (Civil, Mechanical, Electrical or Environmental Focus) Program at an ABET accredited school Must be at minimum Junior status in school Interest in learning and applying engineering knowledge in the areas of Water, Wastewater, Irrigation, Electrical, and/or Transportation projects Prior experience or basic knowledge of AutoCAD and/or Civil 3D a plus, but not required Compensation starts at around $25.00/hour, and will vary based on previous experience and year in school. RH2 is an equal opportunity employer of all qualified individuals; including minorities, women, veterans, individuals with disabilities, and regardless of race, color, religion, sex, national origin, sexual orientation, gender identity or any other characteristic protected by law. RH2 will consider for employment qualified applicants with criminal histories in a manner consistent with all federal, state, and local ordinances.

*Accepting applications through February - Century West will reach out in March* Century West Engineering, a premier Northwest civil engineering consulting firm, is looking for interns to join our team next summer. Candidates for our internship positions should be: Civil or Electrical Engineering majors currently enrolled in an undergraduate program at an accredited college or university Incoming juniors or seniors with preference given to seniors Future engineers who want to make a difference in their communities through public works projects Students with AutoCAD Civil3D experience or willingness to learn Our goals for our interns are to help them gain work-ready CAD skills and introduce them to construction observation and fieldwork. Interns will also develop a strong understanding of: The work Century West does and our company values What public works consulting is and how it differs from working for an agency or private development firm The lifecycle of public works projects Depending on the intern's interests and choice of host office, internships may focus on municipal transportation and utilities projects, aviation projects, or a mix of both. Offices that will host interns in 2026 and the areas of practice available locally include: Portland, OR - municipal and aviation Bend, OR - municipal and aviation Spokane, WA - municipal and aviation Federal Way, WA - aviation Bothell, WA - aviation Sandpoint, ID - municipal Coeur d'Alene, ID - municipal Highlights of our internship program include: A 10-week program running with two start dates: June 1 or June 22 Peer mentorship with current engineer-in-training 6-week professional development presentation series A customized experience to fit each intern's needs Pay Scale: $25 per hour To Apply: Please apply through Century West's ADP portal An Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected status.