Engineering technician jobs in Little Egg Harbor, NJ - 176 jobs

Are you looking to power the next leap in the exciting world of advanced electronics? Do you want to help solve problems that drive success in the rapidly evolving technology and connectivity landscape? Then bring your problem-solving, passion, and creativity to help us power the next leap in electronics. At Qnity, we're more than a global leader in materials and solutions for advanced electronics and high-tech industries - we're a tight-knit team that is motivated by new possibilities, and always up for a challenge. All our dedicated teams contribute to making cutting-edge technology possible. We value forward-thinking challengers, boundary-pushers, and diverse perspectives across all our departments, because we know we play a critical role in the world enabling faster progress for all. Learn how you can start or jumpstart your career with us. The Qnity Parlin, NJ site is pleased to announce that we are accepting applications for Manufacturing Technicians. The Manufacturing Technician position works in 2 or 3 shift operation on either a five or seven-day schedule. Production tasks are associated with the Hitachi reactors, the DuPont reactor, small lot size manufacturing, PD formulation, ancillary mixing and filling, and the polyimide bottling and labeling. Individuals are expected to understand and audit the cleanliness, maintenance and fitness for use of the equipment in these six production process centers. Operations will be carried out in either a special Powder handling room, a Class 10,000 manufacturing cleanroom or a Class 100 filling and labeling cleanroom. Manufacturing Technician will perform in-process quality control testing (e.g. viscosities, acid number, pH, or similar tests). The equipment for these tests will be in the manufacturing control room. In addition, Manufacturing Technicians will be required to understand, input data to and use the EQS quality system. They will need a basic understanding of statistical process control (SPC) and must help the organization maintain ISO compliance. This position requires that materials be precisely measured, fed and the process controlled in compliance with batch sheets, SOP's and SOC's. Manufacturing Technicians are expected to monitor raw material and intermediate inventory levels to assist in ensuring that they are available in sufficient amounts for production demands. They will also be called upon to perform cycle counts and audit material movement transactions. Input transactions in the inventory system (currently IPS). Manufacturing Technicians will handle waste and RCRA “Hazardous Waste” associated with the job, (as defined in State Regulations). The Technician is also responsible for labeling and packaging finished product for shipment in the proper manner to assure accuracy and customer satisfaction. Responsibility: Careful and accurate performance is required so that all materials are correctly weighed, loaded, timed, and controlled to assure consistency of quality. The Technician is responsible for recording weights of material, yield, finished inventory, temperature, instrument readings, and keeping records of the work performed and entering and updating online inventory systems. The Technician must work in an efficient manner, eliminating waste wherever possible. All necessary personal protective equipment and cleanroom uniforms required by the job are to be worn. A minimum requirement for this U.S. based position is the ability to work legally in the United States. No visa sponsorship/support is available for this position, including for any type of U.S. permanent residency (green card) process. No relocation assistance is available for this position. In order to be qualified for this role, the following is required High School diploma or equivalent Must be available to work rotating 8 to 12 hours shifts Must be able to do arithmetic, know how to use percentages and decimals Must be able to read the instructions pertinent to the job. Must work safely and efficiently handling of drums and material, as well as ability to set up, make adjustments, and properly operate a variety of different types of manufacturing equipment is required. Must have sufficient knowledge and ability in keyboarding skills in order to perform data entry activities into online systems. Must be able to operate a process control system. Must be able to operate a fork lift truck or will have the opportunity to be trained to operate a fork lift truck This job description defines minimum requirement for safe and efficient plant operation and does not limit the scope of the job described. ** Please include (paste or attach) an updated resume detailing your experiences and qualifications with your application for consideration Join our Talent Community to stay connected with us! Qnity is an equal opportunity employer. Qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability or any other protected class. If you need a reasonable accommodation to search or apply for a position, please visit our Accessibility Page for Contact Information. Qnity offers a comprehensive pay and benefits package. To learn more visit the Compensation and Benefits page. We use Artificial Intelligence (AI) to enhance our recruitment process.

DirectHire Manufacturing Automation and Robotics Technician Department: Field Operations Employment Type: Full Time, On-Site Our client, a pioneering force in the integration of intelligent machines within the food industry, is seeking an Automation and Robotics Operator to join their mission. This organization is at the forefront of using AI in connection with robotics to transform food manufacturing, with strong backing from top tech investors and significant contracts in the food industry. The Role The Manufacturing Automation and Robotics Technician will be instrumental in transforming food manufacturing processes, using cutting-edge robotics to enhance the production of food products for commercial kitchens and food manufacturers. This role requires direct involvement in the setup, operation, and maintenance of robotic systems, ensuring their optimal performance and integration into client operations. Duties and Responsibilities: - Coordinate onsite schedule of robots with client's manufacturing plans. - Assist the client's assembly line leaders in planning for the use of robots. - Work alongside line supervisors to position robots on the production line. - Configure robots for specific ingredients and meals. - Serve as an on-site resource for troubleshooting, minor repairs, and continuous training to ensure clients can operate the robots efficiently. - Coordinate and execute inspection, maintenance, and repair tasks on robots in the field. - Train clients on operation and maintenance, ensuring they can effectively use the technology. - Recognize, communicate, and document product issues, complaints, and improvements. Requirements: - A minimum of 3 years in a manufacturing support role is necessary, showcasing a strong background in manufacturing operations and a deep understanding of our clients' needs. - Candidates must be available to work a flexible schedule, including weekends, nights, and on-call hours, to accommodate client schedules. - Spanish language working proficiency is a plus, aiding in effective communication with a diverse client base. - Experience in manufacturing automation is highly desirable, indicating a familiarity with advanced technology and automated systems. - An associate degree in a related field is preferred, providing a foundational understanding of technical principles. - Excellent written and verbal communication skills are essential, ensuring clear and effective interaction with clients and team members. - Basic computer skills and the ability to accurately document tasks and issues are required.

An Engineering Technician is a professional with 2 - 5 years engineering experience. This individual will provide engineering services on all phases of an assigned project under the supervision of the Project Manager. Perform and/or oversee civil/site design for a variety of projects including parks, municipal infrastructure, athletic facilities, commercial developments. Responsible for scope, schedule, and budget adherence to assigned tasks. Performs routine engineering assignments requiring application of standard techniques and procedures. Works independently on small assignments and assists Senior Engineers on projects. Works closely with other disciplines on multi-discipline projects. Additional duties include participating in building inspections as required.KNOWLEDGE, SKILLS and ABILITIES: Proficient in Microsoft Office Suite (word, excel, PowerPoint) Proficient in AutoCad Civil 3d computer aided design software Excellent written and oral communication skills Ability to multi-task, appropriately prioritize workflow and complete tasks on schedule and within budget Excellent time management skills Ability to solve problems Municipal Land Use knowledge a plus EDUCATION/EXPERIENCE: Bachelor of Science Degree in Civil Engineering with a from an accredited four- year college or university CERTIFICATIONS/LICENSES REQUIRED Engineer-in-Training (EIT) required Professional Engineer (PE) License is a plus Valid Driver's LicensePHYSICAL DEMANDS AND WORKING ENVIRONMENT:The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. This job operates in a professional office environment. The role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax. Work requires frequent and prolonged computer use. The position requires the ability to sit, stand, file, lift and carry files up to 25 pounds. EEO STATEMENT: This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. We are an At Will employer.

An Engineering Technician is a professional with 2 - 5 years engineering experience. This individual will provide engineering services on all phases of an assigned project under the supervision of the Project Manager. Perform and/or oversee civil/site design for a variety of projects including parks, municipal infrastructure, athletic facilities, commercial developments. Responsible for scope, schedule, and budget adherence to assigned tasks. Performs routine engineering assignments requiring application of standard techniques and procedures. Works independently on small assignments and assists Senior Engineers on projects. Works closely with other disciplines on multi-discipline projects. Additional duties include participating in building inspections as required. KNOWLEDGE, SKILLS and ABILITIES: Proficient in Microsoft Office Suite (word, excel, PowerPoint) Proficient in AutoCad Civil 3d computer aided design software Excellent written and oral communication skills Ability to multi-task, appropriately prioritize workflow and complete tasks on schedule and within budget Excellent time management skills Ability to solve problems Municipal Land Use knowledge a plus EDUCATION/EXPERIENCE: Bachelor of Science Degree in Civil Engineering with a from an accredited four- year college or university CERTIFICATIONS/LICENSES REQUIRED Engineer-in-Training (EIT) required Professional Engineer (PE) License is a plus Valid Driver's License PHYSICAL DEMANDS AND WORKING ENVIRONMENT: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. This job operates in a professional office environment. The role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax. Work requires frequent and prolonged computer use. The position requires the ability to sit, stand, file, lift and carry files up to 25 pounds. EEO STATEMENT: This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. We are an At Will employer.

MACOM designs and manufactures semiconductor products for Data Center, Telecommunication, and Industrial and Defense applications. Headquartered in Lowell, Massachusetts, MACOM has design centers and sales offices throughout North America, Europe, and Asia. MACOM is certified to the ISO9001 international quality standard and ISO14001 environmental management standard. MACOM has more than 65 years of application expertise with multiple design centers, Si, GaAs and InP fabrication, manufacturing, assembly and test, and operational facilities throughout North America, Europe, and Asia. View our facilities at *********************** In addition, MACOM offers foundry services that represents a key core competency within our business. MACOM sells and distributes products globally via a sales channel comprised of a direct field sales force, authorized sales representatives, and leading industry distributors. Our sales team is trained across all of our products to give our customers insights into our entire portfolio. Electronics Engineering Intern Job Description: This is a summer internship position working in the Product Engineering group at MACOM's Hamilton, NJ facility. The candidate will support the development of RF on fiber transmission products and erbium doped fiber amplifiers. Intern will work alongside experienced engineers providing mentoring, guidance, and introductions to colleagues. This Internship with MACOM will help the Intern to gain valuable work experience in a key discipline, build professional relationships, and take ownership of a business-critical project. Possible Tasks Include: * Measurement gain and phase flatness and power transfer response using VNAs * Measurement of spectral response and identifying spurious signals using spectrum analyzers * Bring up of circuit boards and development of embedded firmware * The exact project will depend on the candidate's interests and abilities During the 12 weeks each Intern will: > Be given an individual and well-defined project with set outcome goals > Gain hands on experience > Receive excellent training and ongoing supervision > Be invited to attend an intern webinar series > Attend networking/social events > Attend and present at Poster Session about each Interns project successes and pitfalls > Receive formal, written feedback Job Qualifications: * Must be working toward a B.S. in electrical/computer engineering or equivalent * Due to ITAR regulations, only candidates who are U.S. Persons (U.S. citizens, U.S. nationals, lawful permanent residents, or individuals granted asylum or refugee status) will be considered for this position * Must be self-motivated and able to work independently * Prior experience with test lab equipment such as power supplies, multimeters, oscilloscopes, and network analyzers is desirable * Experience with coding in languages such as C/C++, Python, and others is desirable * Experience with schematic capture and PCB layout, preferably with Altium designer, is desirable EEO: MACOM is an Equal Opportunity Employer committed to a diverse workforce. MACOM will not discriminate against any worker or job applicant on the basis of race, color, religion, sex, gender identity, sexual orientation, national origin, age, disability, genetic information, veteran status, military service, marital status, or any other category protected under applicable law. Reasonable Accommodation: MACOM is committed to working with and providing reasonable accommodations to qualified individuals with physical and mental disabilities. If you have a disability and are in need of a reasonable accommodation with respect to any part of the application process please call *************** or email HR_*************. Provide your name, phone number and the position title and location in which you are interested, and nature of accommodation needed, and we will get back to you. We also work with current employees who request or need reasonable accommodation in order to perform the essential functions of their jobs.

Job Description T&M Associates is a leading engineering and technical services firm focused on innovative solutions that advance our clients' goals and sustain communities. With nearly 60 years of experience, we specialize in five key markets: Buildings and Facilities, Community and Land Development, Environmental, Transportation, and Water. Our team of technical experts and consultants consistently demonstrate success in achieving positive outcomes for our clients nationwide. Headquartered in the Northeast region, and with offices strategically located throughout the country, T&M combines solid industry expertise, a commitment to sustainability, and a successful history of results. To learn more about our team and office culture, we invite you to register for our Middletown Office Open House using this link: *********************************** We are now accepting resumes for Summer 2026 internships. Opportunities are available in various engineering disciplines such as civil, environmental, water resources, transportation, mechanical, and electrical engineering. Additionally, internships are offered in planning, IT, human resources, marketing, and office services. These internships are open to current undergraduate students from freshmen through juniors who are pursuing careers in fields related to our industry. Positions are available at various T&M office locations and typically run from late May through August. Please note that in-person attendance at our office locations is required for this position. Specific schedules will be discussed and decided prior to your internship. Ideal candidates should meet the following criteria: Enrolled in a Bachelor's degree program. Previous internship experience is advantageous. Proficiency in Microsoft Office (Word, Excel, PowerPoint) is required. Demonstrates a professional demeanor, appearance, and attitude. Strong analytical, interpersonal, writing, and verbal communication skills. For engineering-specific internships: Pursuing a degree in Engineering or a closely related field. Experience with AutoCAD, Civil 3D, and Microsoft Office is preferred. T&M Associates is committed to pay transparency and equitable compensation practices in compliance with applicable laws, including the New Jersey Equal Pay Act. T&M estimates that the salary range for this position will fall between $20 - $23/hr. New hires must provide documentation proving eligibility to work in the United States. We are an Equal Opportunity/Affirmative Action Employer.

OPEX Corporation is currently looking for a full time Electronic Technician to work at our World Headquarters in Moorestown, NJ. We are looking for a worker who is able to commit to a full-time schedule during our day shift that runs from 6:00 AM - 2:30 PM. All interested candidates must have an Associate Degree in Electronics, or a Technical School education with a completed certification in electronics. If you are a communicative, diligent, punctual and detail oriented individual then OPEX may be the right place for you to pursue your career. Essential Responsibilities · Troubleshoot and repair electronics to component level · Troubleshoot and repair equipment at the system level (training provided) · Solder through hole and surface mount technology components in the process of repairs · Create daily production reports for individual contributor Qualifications · Associate's Degree in Electronics, or Technical School education with a completed certification in electronics is required. · Ability to read various technical documentation (i.e. Schematics, Data Sheets, and Test Procedures) · Possess a fundamental understanding of Analog and Digital circuitry · Soldering experience with both through-hole and SMT (IEC/IPC-A-610 Training and certification or better a plus) · Demonstrate working knowledge of standard test equipment such as Oscilloscopes, Multimeters, and Power Supplies · Demonstrable skills in troubleshooting and critical thinking required. · Must be an effective communicator with attention to detail · A+ Certification is a plus · All candidates considered for a position will be administered and must pass an electronics exam prior to an offer of employment being extended. Physical/Work Environments · Sitting or standing for extended periods of time · Occasionally lift 25 pounds · Squatting, bending, kneeling, reaching overhead, reaching forward may occur while on the job Pay range $18-22 based on experience.

Program Timeframe: Mid-May through mid-August Join GFT, an award-winning architecture, engineering, and construction firm, as a Bridge Engineering Intern and gain real-world experience in a dynamic environment. Our inclusive environment will fuel your innovation and imagination while fostering a sense of belonging. Working on the bridge team at GFT offers the opportunity to engage in transformative projects that enhance transportation infrastructure and improve community connectivity. Whether working on highways and bridges or traffic engineering, our team excels in resilient, sustainable design and construction, delivering innovative solutions that address the complexities of modern, multimodal roadway systems and ensure safe, efficient, and reliable travel for all . Explore some of our signature bridge projects here. What you'll be challenged to do: During your internship, you will work on a highly functioning team and aid in providing design services for a wide variety of projects. You'll receive guidance, supervision and mentorship by experienced engineers and professionals with your success as the goal. The majority of our interns convert to full-time employees. In this capacity, the successful candidate will be responsible for the following: Support real client projects by performing structural analysis, including finite element 3D modeling, design, and drafting for transportation structures including bridges, culverts, retaining walls, and sign structures. Assist in quantity calculations and contribute to cost estimates. Aid in the development of construction contract documents and review shop and working drawings. Coordinate work activities with other disciplines as directed. Assist in reviewing inspection reports and performing bridge load ratings under supervision. What you'll bring to our firm: Currently enrolled in an ABET-accredited undergraduate or graduate degree program in Civil Engineering with a focus on Structures. Demonstrated interest in bridge and structural design and analysis through prior internships or applied academic coursework. Basic understanding of bridge design principles. Familiarity with CADD software such as MicroStation and AutoCAD. Proficiency in MS Office (Excel, Word, PowerPoint, Outlook). Ability to work independently and collaboratively in a design team. Strong written and oral communication skills. What we prefer you bring: Interest in learning 3D modeling software such as Revit, Civil 3D, and STAAD. Compensation:The salary range for this role is $21.00 - $28.00 per hour. Salary is dependent upon experience and geographic location. At GFT, a privately held AEC firm, we innovate where transportation, water, power, and buildings converge. We call this the Infrastructure of Life. We measure our success by the strength of our relationships - that's why we're the employer of choice for 5,000+ of the industry's brightest engineers, planners, architects, inspectors, designers, and more. Our clients choose us for our expertise and prefer us for our nimble approach, creativity, and personal touch. Backed by over a century's experience, together we're building a lasting legacy for future generations: stronger communities, a healthier planet, and better lives. GFT: Ingenuity That Shapes Lives™ is an Equal Opportunity Employer. All qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veterans' status or other characteristics protected by law. Unsolicited resumes from third party agencies will be considered the property GFT. Location: Marlton, NJ Core Business Hours: 8:00 AM - 5:00 PM Employment Status: Hourly GFT does require the successful completion of a criminal background check for all advertised positions. "California Applicants" Applicants in the County of Los Angeles - Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. Applicants in the City of San Francisco - Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. Applicants in the State of California - Qualified applications with arrest or conviction records will be considered for employment in accordance with the California Fair Chance Act. #LI-ML2 #LI-Hybrid

Program Timeframe: Mid-May through mid-August Join GFT, an award-winning architecture, engineering, and construction firm, as a Bridge Engineering Intern and gain real-world experience in a dynamic environment. Our inclusive environment will fuel your innovation and imagination while fostering a sense of belonging.Working on the bridge team at GFT offers the opportunity to engage in transformative projects that enhance transportation infrastructure and improve community connectivity. Whether working on highways and bridges or traffic engineering, our team excels in resilient, sustainable design and construction, delivering innovative solutions that address the complexities of modern, multimodal roadway systems and ensure safe, efficient, and reliable travel for all. Explore some of our signature bridge projects here. What you'll be challenged to do:During your internship, you will work on a highly functioning team and aid in providing design services for a wide variety of projects. You'll receive guidance, supervision and mentorship by experienced engineers and professionals with your success as the goal. The majority of our interns convert to full-time employees. In this capacity, the successful candidate will be responsible for the following: * Support real client projects by performing structural analysis, including finite element 3D modeling, design, and drafting for transportation structures including bridges, culverts, retaining walls, and sign structures. * Assist in quantity calculations and contribute to cost estimates. * Aid in the development of construction contract documents and review shop and working drawings. * Coordinate work activities with other disciplines as directed. * Assist in reviewing inspection reports and performing bridge load ratings under supervision. What you'll bring to our firm: * Currently enrolled in an ABET-accredited undergraduate or graduate degree program in Civil Engineering with a focus on Structures. * Demonstrated interest in bridge and structural design and analysis through prior internships or applied academic coursework. * Basic understanding of bridge design principles. * Familiarity with CADD software such as MicroStation and AutoCAD. * Proficiency in MS Office (Excel, Word, PowerPoint, Outlook). * Ability to work independently and collaboratively in a design team. * Strong written and oral communication skills. What we prefer you bring: * Interest in learning 3D modeling software such as Revit, Civil 3D, and STAAD. Compensation:The salary range for this role is $21.00 - $28.00 per hour. Salary is dependent upon experience and geographic location. At GFT, a privately held AEC firm, we innovate where transportation, water, power, and buildings converge. We call this the Infrastructure of Life. We measure our success by the strength of our relationships - that's why we're the employer of choice for 5,000+ of the industry's brightest engineers, planners, architects, inspectors, designers, and more. Our clients choose us for our expertise and prefer us for our nimble approach, creativity, and personal touch. Backed by over a century's experience, together we're building a lasting legacy for future generations: stronger communities, a healthier planet, and better lives.GFT: Ingenuity That Shapes Lives is an Equal Opportunity Employer. All qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veterans' status or other characteristics protected by law. Unsolicited resumes from third party agencies will be considered the property GFT. Location: Marlton, NJCore Business Hours: 8:00 AM - 5:00 PMEmployment Status: HourlyGFT does require the successful completion of a criminal background check for all advertised positions. "California Applicants"Applicants in the County of Los Angeles - Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.Applicants in the City of San Francisco - Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records.Applicants in the State of California - Qualified applications with arrest or conviction records will be considered for employment in accordance with the California Fair Chance Act.#LI-ML2#LI-Hybrid

Job Description NDI Engineering is seeking a skilled and motivated Electronics Technician to join our team in Lakehurst, NJ. The ideal candidate will have a solid background in the assembly, testing, and troubleshooting of electronic components and systems, with a focus on high-quality workmanship in compliance with military standards. Duties & Responsibilities As an Electronics Technician, you will play a key role in the production and testing of electrical and electronic assemblies. Your responsibilities will include: Assemble and test cable and wire harnesses, junction boxes, control panels, and other electronic assemblies. Read and interpret blueprints, wiring diagrams, and electrical schematics (MIL-STD knowledge preferred). Perform soldering (through-hole and surface mount) in compliance with J-STD-001 or similar standards. Work with fiber optics, including termination, splicing, and testing (NAVSEA standards preferred). Conduct continuity and functionality tests using multimeters, oscilloscopes, and other diagnostic equipment. Ensure product quality and accuracy through inspection and verification procedures. Maintain accurate documentation of assembly processes, test results, and quality control metrics. Collaborate with engineers, quality control, and other technicians to resolve technical issues and improve processes. Adhere to safety procedures and maintain a clean, organized work environment. Operate various hand and power tools, crimpers, soldering irons, and material handling equipment as needed. Requirements: 3-5 years of professional experience as an electronics technician in a manufacturing, defense, or aerospace environment. Strong understanding of electronic and electromechanical systems. Proficient in the use of hand tools, power tools, and diagnostic instruments. Able to read and interpret technical drawings and schematics. Must be a U.S. Citizen and able to obtain and maintain a DoD Secret Security Clearance. Must be available to work on-site in Lakehurst, NJ; this is not a remote position. Preferred Certifications (one or more of the following): J-STD-001 Solder Certification IPC/WHMA-A-620 Certification (Requirements and Acceptance for Cable and Wire Harness Assemblies) NAVSEA MIL-STD-2042 Fiber Optic Certification Powered by JazzHR HEY8owQsh6

Who we are: Inductotherm was founded on simple principles , People, Products and Partnership-to provide the foundry industry with efficient and advanced induction equipment. Our core values of customer service, quality and reliability, value, along with design and technology have been the keys to our continued success. We help the metal casting industry grow stronger through our advanced technologies, continuous education and ongoing support. We strive to continue to manufacture the highest quality equipment and work towards ensuring that the equipment is the most efficient to promote a sustainable environment. What you will do Conduct various performance tests of the company's products in accordance with test criteria established by policies and procedures or written test plans. Maintain accurate records of test results. Experience in high voltage testing is preferred. Good basic math skills - adding, subtracting, multiplying, dividing, working with fractions and transposing equations. Good mechanical aptitude - able to perform basic plumbing, wiring and able to use basic hand tools, i.e.; drill, wrench, screw driver, etc. Conduct tests of new components, assemblies and systems based on test criteria as established by policies and procedures or written test plans. Accurately measure electrical and other parameters using Multimeters, Power meters, etc. Perform physical and functional inspection of electrical components. Knowledge of single and 3-phase electrical circuits (high power), knowledge of analog and digital electronic circuitry. Work with high voltage in the Power Test area: 1150, 575, 480, 380 VAC and 600-1650 VDC. Perform general housekeeping as required. Complete miscellaneous duties as assigned. Regular in attendance and able and willing to work a reasonable amount of overtime. Occasional travel, as required. Will be required to complete miscellaneous duties as assigned. Non-Essential Functions: Know the basic operation of analog/digital oscilloscope. Read and follow wiring diagrams and schematics. Solder and braze (plumbing). Operate overhead crane and drive a forklift. Essential Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must disclose any surgical implants, pins, braces or other devices that could be affected by induction fields. Climb ladder up to 16 feet, use a catwalk and stand for 8-10 hours per day. Dexterous, have good strength, and be able to lift up to 51 lbs. Quick hand and arm movement, or the movement of both hands to grasp, manipulate, or assemble objects. Read and understand information and ideas presented in writing. Listen to and understand information presented through spoken words and sentences. Communicate information and ideas, written and verbally so others will understand. Hold a valid driver's license and able to drive an automobile. Able to travel on short notice by public transportation including (i.e.: aircrafts, trains, bus, cars) domestically and internationally. What you bring Associate's Degree in Electrical Engineering preferred. 1 year of technical/trade school electrical certification. What we Offer / Why Choose Inductotherm Competitive Salary Monthly Incentive Bonus Employee Discounts Profit Sharing Plan Health/Dental/Vision within 30 days Tuition Assistance 401(k) Condition of Employment: Must be able to satisfactorily complete the Inductotherm Corp. hiring process requirements which includes a comprehensive assessment, drug testing, and a background check. The Company complies with the Drug-Free Workplace Act of 1988 and federal laws and regulations. Inductotherm Is E-Verified. All offers of employment are contingent upon the successful completion of the E-Verify process to confirm eligibility to work in the United States.

Electronic Restoration Services (ERS) is a disaster restoration company specializing in the restoration of both consumer electronics and appliances. The Appliance and Consumer Electronics Technician will perform restoration on many varying electronics and appliances. Along with the restoration process, each tech will be certified to drive the box truck by taking the DOT physical so that they can do the pickup and delivery of electronics and appliances as well. Primary Responsibilities Include: (These are intended only as illustrations of the various types of work performed. The omission of specific duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position.) On-site evaluation of damaged electronics from insurance claims involving fire, water, or lightning strike damage. Inventory, remove and transport electronics and appliances from the insured's home/business. Disassemble and evaluate electronics to be cleaned, serviced, and/or repaired. Test, clean, restore, and re-assemble electronics to pre-loss condition. Deliver and reinstall appliances and consumer electronics within the insured home or business. Able to travel for up to two weeks for corporate training if needed. Comfortable being on-call for immediate deployment to job site nights or weekends. Requirements Include: Fantastic customer service skills. Able to interact one-on-one with the customer by within their own homes. Capable of de-escalating tense situations with customers. High School Diploma or equivalent. Associate's Degree or higher is a plus. Valid driver's license with a satisfactory driving record. Safely drive company vehicles to the job site. Able to work efficiently and effectively in a team environment. Exhibit a professional, neat, and clean appearance. Exceptional verbal and written communication skills. Working knowledge of basic PC and iPad operations. Strengths in multi-tasking and prioritizing. Attention to detail and accuracy. Ability to lift up to 75 pounds. Successfully complete a pre-employment drug screen and criminal background check. Pass the DOT physical. Additional Responsibilities of an ERS Appliance and Electronics Technician Consist of the Following: Report to work at scheduled times. Be available for non-scheduled work requirements as needed including nights, weekends, and holidays. Maintain appearance and demeanor representative of the ERS image. Cooperate with direct supervision and perform duties assigned by supervisors. Cooperate with other service technicians and perform duties assigned. Inspect own work and ensure that it is complete, thorough, and will pass ERS quality standards. Report all injuries immediately. Injured workers requiring more than first aid treatment must immediately be seen by a physician/clinic. Attend and participate in all staff meetings as requested. Abide by all rules, regulations, and policies contained in the Employee Handbook, Safety Manual, and Employment Agreement including active participation in identifying, reporting, and correcting situations affecting safety, quality, and customer satisfaction. Properly use and maintain the ERS vehicle in accordance with the manufacturer's recommendations and ERS procedures. Use and maintain all provided materials, supplies, and equipment in accordance with the manufacturer's recommended procedures. Report all deficiencies or unusual characteristics of the ERS vehicle or equipment on the appropriate ERS form. Document all job activity using the proper forms and by filling them out completely and legibly. Keep job or customer files neat, organized, and secure and keep its contents confidential. Sign Service Technician's schedule or Time Card (daily or weekly). Participate in ongoing training programs sponsored by the company and/or affiliated organizations and able to travel for the initial training program. Demonstrate competency in the knowledge and skills required for position by successfully passing exams needed to obtain trade-specific certifications. Fulfill all service technician essential functions. Fulfill all other duties and responsibilities assigned by the company. Compensation: $17.00 - $19.00 per hour For over 25 years, steady and calculated growth has evolved the company into a world-class operation in restoring electronics, art, textiles, and documents quickly and effectively. Since 1993 Prism Specialties has been making its mark recovering and restoring electronics specializing in both residential and commercial markets. As we strive to accommodate our customers and their restoration needs, Prism Specialties expanded into art restoration, document restoration, and textile restoration. Our teams specialize in recovery solutions for major disasters related to fire, water, lightening and vandalism. We provide high quality and cost-effective “hands-on” restoration services with appropriate turnaround times that contractors, claims professionals, and homeowners require. Those individuals who become part of our team are both knowledgeable and skilled. We offer a viable work environment with the ability to make a positive impact on the community and have more control over their future. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to Restoration Specialties Corporate.

Are you looking to power the next leap in the exciting world of advanced electronics? Do you want to help solve problems that drive success in the rapidly evolving technology and connectivity landscape? Then bring your problem-solving, passion, and creativity to help us power the next leap in electronics. At Qnity, we're more than a global leader in materials and solutions for advanced electronics and high-tech industries - we're a tight-knit team that is motivated by new possibilities, and always up for a challenge. All our dedicated teams contribute to making cutting-edge technology possible. We value forward-thinking challengers, boundary-pushers, and diverse perspectives across all our departments, because we know we play a critical role in the world enabling faster progress for all. Learn how you can start or jumpstart your career with us. The Qnity Parlin, NJ site is pleased to announce that we are accepting applications for Manufacturing Technicians. The Manufacturing Technician position works in 2 or 3 shift operation on either a five or seven-day schedule. Production tasks are associated with the Hitachi reactors, the DuPont reactor, small lot size manufacturing, PD formulation, ancillary mixing and filling, and the polyimide bottling and labeling. Individuals are expected to understand and audit the cleanliness, maintenance and fitness for use of the equipment in these six production process centers. Operations will be carried out in either a special Powder handling room, a Class 10,000 manufacturing cleanroom or a Class 100 filling and labeling cleanroom. Manufacturing Technician will perform in-process quality control testing (e.g. viscosities, acid number, pH, or similar tests). The equipment for these tests will be in the manufacturing control room. In addition, Manufacturing Technicians will be required to understand, input data to and use the EQS quality system. They will need a basic understanding of statistical process control (SPC) and must help the organization maintain ISO compliance. This position requires that materials be precisely measured, fed and the process controlled in compliance with batch sheets, SOP's and SOC's. Manufacturing Technicians are expected to monitor raw material and intermediate inventory levels to assist in ensuring that they are available in sufficient amounts for production demands. They will also be called upon to perform cycle counts and audit material movement transactions. Input transactions in the inventory system (currently IPS). Manufacturing Technicians will handle waste and RCRA "Hazardous Waste" associated with the job, (as defined in State Regulations). The Technician is also responsible for labeling and packaging finished product for shipment in the proper manner to assure accuracy and customer satisfaction. Responsibility: Careful and accurate performance is required so that all materials are correctly weighed, loaded, timed, and controlled to assure consistency of quality. The Technician is responsible for recording weights of material, yield, finished inventory, temperature, instrument readings, and keeping records of the work performed and entering and updating online inventory systems. The Technician must work in an efficient manner, eliminating waste wherever possible. All necessary personal protective equipment and cleanroom uniforms required by the job are to be worn. A minimum requirement for this U.S. based position is the ability to work legally in the United States. No visa sponsorship/support is available for this position, including for any type of U.S. permanent residency (green card) process. No relocation assistance is available for this position. In order to be qualified for this role, the following is required * High School diploma or equivalent * Must be available to work rotating 8 to 12 hours shifts * Must be able to do arithmetic, know how to use percentages and decimals * Must be able to read the instructions pertinent to the job. * Must work safely and efficiently handling of drums and material, as well as ability to set up, make adjustments, and properly operate a variety of different types of manufacturing equipment is required. * Must have sufficient knowledge and ability in keyboarding skills in order to perform data entry activities into online systems. * Must be able to operate a process control system. * Must be able to operate a fork lift truck or will have the opportunity to be trained to operate a fork lift truck This job description defines minimum requirement for safe and efficient plant operation and does not limit the scope of the job described. Please include (paste or attach) an updated resume detailing your experiences and qualifications with your application for consideration Join our Talent Community to stay connected with us! Qnity is an equal opportunity employer. Qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability or any other protected class. If you need a reasonable accommodation to search or apply for a position, please visit our Accessibility Page for Contact Information. Qnity offers a comprehensive pay and benefits package. To learn more visit the Compensation and Benefits page. We use Artificial Intelligence (AI) to enhance our recruitment process.

An Engineering Technician is a professional with 2 - 5 years engineering experience. This individual will provide engineering services on all phases of an assigned project under the supervision of the Project Manager. Perform and/or oversee civil/site design for a variety of projects including parks, municipal infrastructure, athletic facilities, commercial developments. Responsible for scope, schedule, and budget adherence to assigned tasks. Performs routine engineering assignments requiring application of standard techniques and procedures. Works independently on small assignments and assists Senior Engineers on projects. Works closely with other disciplines on multi-discipline projects. Additional duties include participating in building inspections as required.KNOWLEDGE, SKILLS and ABILITIES: Proficient in Microsoft Office Suite (word, excel, PowerPoint) Proficient in AutoCad Civil 3d computer aided design software Excellent written and oral communication skills Ability to multi-task, appropriately prioritize workflow and complete tasks on schedule and within budget Excellent time management skills Ability to solve problems Municipal Land Use knowledge a plus EDUCATION/EXPERIENCE: Bachelor of Science Degree in Civil Engineering with a from an accredited four- year college or university CERTIFICATIONS/LICENSES REQUIRED Engineer-in-Training (EIT) required Professional Engineer (PE) License is a plus Valid Driver's LicensePHYSICAL DEMANDS AND WORKING ENVIRONMENT:The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. This job operates in a professional office environment. The role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax. Work requires frequent and prolonged computer use. The position requires the ability to sit, stand, file, lift and carry files up to 25 pounds. EEO STATEMENT: This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. We are an At Will employer.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs expert level break-fix & preventive maintenance, and/or design of mechanical, and electrical equipment improvements as well as complex systems as the employee's job specialty requires. Provides troubleshooting support on equipment and technical support on production lines as appropriate for the employee's job specialty. Maintains in-depth technical knowledge of numerous systems as the employee's job specialty requires. Performs research and procedures as the employee's job specialty requires. · Programs, troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. · Utilizes predictive equipment and interprets results for analysis, equipment condition assessment, troubleshooting and proactive maintenance. Including but not limited to infrared thermography, ultrasonic testing, power quality analysis, laser interferometry, ball bar, and vibration analysis. · Leads, drives and participates in CI activities--processes, results and cost savings using CI tools and methodology. · Identifies and sources parts, supplies and repair items as necessary. Suggests alternative items and engineered solutions to improve reliability. · Independently performs maintenance as per industry standards. · Complies with 5S and housekeeping standards. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Studies and investigates technical and systems methods, tools, and innovations that can be implemented in ATS sites to improve maintenance practices and updates documentation. · Prepares input for cost analysis for new equipment, repair/rebuild proposals, cost savings and innovations as required. · Updates records and reviews CMMS history and analyzes data. · Provides technical contents of sales quotations and performs T&M duties as required. · Trains and coaches less proficient technician. Assumes project manager responsibilities as assigned. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 7 years of related experience in specific industry; or, 10 years of experience in specific industry. · Proficiency in predictive technologies including vibration analysis or laser interferometer operations, precision alignments, and maintenance of applicable process equipment. · Understands electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs. · Must be able to use hand tools and specialized tools as appropriate. · May be required to travel. · Six Sigma experience desired. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. Pay Range$36.78-$47.03 USD ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Job Description T&M Associates is a leading engineering and technical services firm focused on innovative solutions that advance our clients' goals and sustain communities. With nearly 60 years of experience, we specialize in five key markets: Buildings and Facilities, Community and Land Development, Environmental, Transportation, and Water. Our team of technical experts and consultants consistently demonstrate success in achieving positive outcomes for our clients nationwide. Headquartered in the Northeast region, and with offices strategically located throughout the country, T&M combines solid industry expertise, a commitment to sustainability, and a successful history of results. To learn more about our team and office culture, we invite you to register for our Middletown Office Open House using this link: *********************************** We are now accepting resumes for Summer 2026 internships. Opportunities are available in various engineering disciplines such as civil, environmental, water resources, transportation, mechanical, and electrical engineering. Additionally, internships are offered in planning, IT, human resources, marketing, and office services. These internships are open to current undergraduate students from freshmen through juniors who are pursuing careers in fields related to our industry. Positions are available at various T&M office locations and typically run from late May through August. Please note that in-person attendance at our office locations is required for this position. Specific schedules will be discussed and decided prior to your internship. Ideal candidates should meet the following criteria: Enrolled in a Bachelor's degree program. Previous internship experience is advantageous. Proficiency in Microsoft Office (Word, Excel, PowerPoint) is required. Demonstrates a professional demeanor, appearance, and attitude. Strong analytical, interpersonal, writing, and verbal communication skills. For engineering-specific internships: Pursuing a degree in Engineering or a closely related field. Experience with AutoCAD, Civil 3D, and Microsoft Office is preferred. T&M Associates is committed to pay transparency and equitable compensation practices in compliance with applicable laws, including the New Jersey Equal Pay Act. T&M estimates that the salary range for this position will fall between $20 - $23/hr. New hires must provide documentation proving eligibility to work in the United States. We are an Equal Opportunity/Affirmative Action Employer.

OPEX Corporation is currently looking for a full-time Test Engineering Technician to work at our World Headquarters in Moorestown, NJ. This position provides support for the proprietary electronics test fixtures used in our warehouse automation, document scanning and high-speed mail extraction equipment. Candidate will be responsible for the maintenance of board test/repair fixtures, performing component-level failure analysis of Field returned PCBAs, supporting the development engineers with their projects as well as supporting Electrical Assembly. OPEX provides a challenging and growing team-oriented environment for developing and expanding our innovative, industry-leading technology. If this sounds attractive, OPEX is a great place for you to advance your career. Qualifications Associate's Degree in Electronics, Technical School education and/or equivalent hands-on experience. 3+ years' experience in a technical development environment. A solid, fundamental understanding of Analog and Digital circuitry. Ability to understand various technical documentation including schematics, component data sheets, test procedures, ECOs and other technical documentation. Familiarity with all standard test equipment (e.g. Oscilloscopes, Multimeters). Soldering experience with both through-hole and SMT. Effective written and verbal communication skills, including writing Test Procedures and build documentation. Experience in the creation and design of printed circuit boards is a plus. Experience with C programming for embedded designs is a huge plus. Experience with 3D modeling (i.e. Inventor, Creo, Solidworks) is also a huge plus. Responsibilities Provide test fixture repair and maintenance. Provide component-level failure analysis on Field returned PCBAs. Create or amend test procedures and other supporting documentation. Develop or assist with development of various test environments. Work closely with the Test Engineers during project development, assisting as needed with documentation and debug efforts. Work closely with Opex board repair technicians to assist with troubleshooting difficult faults while helping to increase their overall knowledge. Support Electrical Assembly in creation and maintenance of cable/harness tests. Assist Production with challenging system-level problems. Skilled in troubleshooting and critical thinking. Other responsibilities as required Physical/Work Environment Office and warehouse setting Ability to lift up to 25 pounds Pay range is $22 - $28 per hour, based on experience.

Program Timeframe: Mid-May through mid-August Join GFT, an award-winning architecture, engineering, and construction firm, as a Bridge Engineering Intern and gain real-world experience in a dynamic environment. Our inclusive environment will fuel your innovation and imagination while fostering a sense of belonging. Working on the bridge team at GFT offers the opportunity to engage in transformative projects that enhance transportation infrastructure and improve community connectivity. Whether working on highways and bridges or traffic engineering, our team excels in resilient, sustainable design and construction, delivering innovative solutions that address the complexities of modern, multimodal roadway systems and ensure safe, efficient, and reliable travel for all . Explore some of our signature bridge projects here. What you'll be challenged to do: During your internship, you will work on a highly functioning team and aid in providing design services for a wide variety of projects. You'll receive guidance, supervision and mentorship by experienced engineers and professionals with your success as the goal. The majority of our interns convert to full-time employees. In this capacity, the successful candidate will be responsible for the following: Support real client projects by performing structural analysis, including finite element 3D modeling, design, and drafting for transportation structures including bridges, culverts, retaining walls, and sign structures. Assist in quantity calculations and contribute to cost estimates. Aid in the development of construction contract documents and review shop and working drawings. Coordinate work activities with other disciplines as directed. Assist in reviewing inspection reports and performing bridge load ratings under supervision. What you'll bring to our firm: Currently enrolled in an ABET-accredited undergraduate or graduate degree program in Civil Engineering with a focus on Structures. Demonstrated interest in bridge and structural design and analysis through prior internships or applied academic coursework. Basic understanding of bridge design principles. Familiarity with CADD software such as MicroStation and AutoCAD. Proficiency in MS Office (Excel, Word, PowerPoint, Outlook). Ability to work independently and collaboratively in a design team. Strong written and oral communication skills. What we prefer you bring: Interest in learning 3D modeling software such as Revit, Civil 3D, and STAAD. Compensation:The salary range for this role is $21.00 - $28.00 per hour. Salary is dependent upon experience and geographic location. At GFT, a privately held AEC firm, we innovate where transportation, water, power, and buildings converge. We call this the Infrastructure of Life. We measure our success by the strength of our relationships - that's why we're the employer of choice for 5,000+ of the industry's brightest engineers, planners, architects, inspectors, designers, and more. Our clients choose us for our expertise and prefer us for our nimble approach, creativity, and personal touch. Backed by over a century's experience, together we're building a lasting legacy for future generations: stronger communities, a healthier planet, and better lives. GFT: Ingenuity That Shapes Lives™ is an Equal Opportunity Employer. All qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veterans' status or other characteristics protected by law. Unsolicited resumes from third party agencies will be considered the property GFT. Location: Marlton, NJ Core Business Hours: 8:00 AM - 5:00 PM Employment Status: Hourly GFT does require the successful completion of a criminal background check for all advertised positions. "California Applicants" Applicants in the County of Los Angeles - Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. Applicants in the City of San Francisco - Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. Applicants in the State of California - Qualified applications with arrest or conviction records will be considered for employment in accordance with the California Fair Chance Act. #LI-ML2 #LI-Hybrid

NDI Engineering is seeking a skilled and motivated Electronics Technician to join our team in Lakehurst, NJ. The ideal candidate will have a solid background in the assembly, testing, and troubleshooting of electronic components and systems, with a focus on high-quality workmanship in compliance with military standards. Duties & Responsibilities As an Electronics Technician, you will play a key role in the production and testing of electrical and electronic assemblies. Your responsibilities will include: * Assemble and test cable and wire harnesses, junction boxes, control panels, and other electronic assemblies. * Read and interpret blueprints, wiring diagrams, and electrical schematics (MIL-STD knowledge preferred). * Perform soldering (through-hole and surface mount) in compliance with J-STD-001 or similar standards. * Work with fiber optics, including termination, splicing, and testing (NAVSEA standards preferred). * Conduct continuity and functionality tests using multimeters, oscilloscopes, and other diagnostic equipment. * Ensure product quality and accuracy through inspection and verification procedures. * Maintain accurate documentation of assembly processes, test results, and quality control metrics. * Collaborate with engineers, quality control, and other technicians to resolve technical issues and improve processes. * Adhere to safety procedures and maintain a clean, organized work environment. * Operate various hand and power tools, crimpers, soldering irons, and material handling equipment as needed. Requirements: * 3-5 years of professional experience as an electronics technician in a manufacturing, defense, or aerospace environment. * Strong understanding of electronic and electromechanical systems. * Proficient in the use of hand tools, power tools, and diagnostic instruments. * Able to read and interpret technical drawings and schematics. * Must be a U.S. Citizen and able to obtain and maintain a DoD Secret Security Clearance. * Must be available to work on-site in Lakehurst, NJ; this is not a remote position. Preferred Certifications (one or more of the following): * J-STD-001 Solder Certification * IPC/WHMA-A-620 Certification (Requirements and Acceptance for Cable and Wire Harness Assemblies) * NAVSEA MIL-STD-2042 Fiber Optic Certification