Senior Design Engineer jobs at Esperanto.ai

About Archaea bp is committed to investing in lower carbon energy so we can meet our ambition to reach net zero by 2050. And while we're still mostly in oil and gas today, bioenergy is one of our five transition growth engines and a key focus to help us support the global energy transition. Archaea Energy, a bp company, is a leader in landfill gas to energy and the largest renewable natural gas (RNG) producer in the US. With big ambitions, we specialize in the development, construction and operation of RNG, landfill-gas-to-electric and dairy digester facilities. The team operates around 50 sites in 32 states with a robust development pipeline. About the role The Principal Facilities Engineer will be responsible for providing engineering support to operating the Assai Renewal Natural Gas (RNG) plant located in Throop, PA. A key asset for Archaea Energy, this facility converts landfill gas, collected at the landfill, into pipeline quality natural gas (High Btu or Renewable Natural Gas). The facility processes the landfill gas by removing the majority of the non-methane components including CO2, Nitrogen, water, sulfur and volatile and non-volatile organic compounds to attain pipeline quality gas. The support will range from plant optimization to small upgrade projects. This role will work closely with Operations and Maintenance personnel at the plant in support of achieving plant runtime and production KPI's. They will also work closely with in-house Engineering teams and 3rd party Engineering Contractors to develop workpack deliverables for plant modifications. A key accountability will be maintaining and updating Process Safety Information for the plant. The successful candidate must be able to report to the plant in Throop, PA at least 3 days per week. You must live near the site or be willing to relocate to report into the site to be considered for the role. Key accountabilities Lead the creation of MOC's to document plant modifications and upgrades Work directly with 3rd-party engineering firms for engineering deliverables that are not internally generated Work with plant PSM coordinator to ensure PSM deliverables are kept up to date Review and approve major engineering submittals generated by 3rd parties Provide engineering input into operating, maintenance, commissioning, and start-up procedures and strategies Drive the right level of risk assessment for changes, from a Hazard Checklist to a HAZOP Ensure designs are aligned with safety and long-term serviceability as top priorities Act as a resource for new operators and technicians in the design and operation of the gas plant Provide start-up support for plant upgrades Essential education Bachelor's degree (B.S.) in Mechanical or Chemical Engineering or equivalent in related field Essential experience More than 5 years experience with natural gas processing, refining, petrochemicals or related field. Proven track record in practical application of engineering standards and practices for operating facilities (e.g. ASME, API) Experience with designing & executing minor mechanical modifications and/or overseeing complex repair scopes Experience and technical understanding of engineering, maintenance, and operation of gas processing equipment Experience in root cause failure analysis Proficient in working with PFDs and P&IDs. Desirable criteria Professional Engineering (PE) license Experience with cryogenic gas plant operations The following specific technical experience is desirable: gas processing/treating, gas compression equipment, pressure swing adsorption, flares and thermal oxidizers Knowledge and understanding of fluid flow principles, thermal systems, pressure relief systems, mechanical design, and structural analysis Understanding of ASME, AISC, OSHA, AGA & ASTM standards Why join us? Delivering a better and more balanced energy system requires many different approaches and solutions. All of us have a part to play. We aim to support our people to learn and grow in an inclusive environment in which everyone is respected and treated fairly. So, if you have the right skills, commitment and courage to help us invest in today's energy system and build out tomorrow's, apply today! How much do we pay? $110,600 - $158,000. *Note that the pay range listed for this position is a genuinely expected and reasonable estimate of the range of possible base compensation at the time of posting. This position offers paid vacation depending on your years of relevant industry experience and will range from 120 - 240 hours of vacation per year for full times employees (60 - 240 hours of vacation per year for part time employees). You will also be eligible for 9 paid holidays per year and 2 personal choice holidays. You may learn more about how we calculate paid vacation and view our generous vacation and holiday schedules at benefits@bp. Bp has a parental leave policy as well, which offers up to 8 weeks' paid leave for the birth or adoption of a child. Learn more at benefits@bp. Join our industry-leading team and you'll receive a reward and wellbeing package to enable your work to fit with your life. These include, but are not limited to: Discretionary Annual Bonus Program Quarterly Momentum Bonus 401K Program Health, Vision, And Dental Insurance Life Insurance Short-Term Disability Long-Term Disability But above all? You'll play a key part in helping bp deliver our ambition - to be a net zero company by 2050 or sooner and help the world get to net zero. Apply today! Travel Requirement No travel is expected with this role Relocation Assistance: This role is not eligible for relocation Remote Type: This position is a hybrid of office/remote working Skills: Agility core practices, Agility core practices, Analytical Thinking, Asset Life Cycle Management, Automation system digital security, Commercial Acumen, Commissioning, start-up and handover, Communication, Competency Management, Creativity and Innovation, Digital fluency, Earthing and grounding systems, Electrical operational safety, Factory acceptance testing, Financial Management, Fire and gas philosophy, Functional Safety, Hazard Identification, Hazard identification and protection layer definition, Instrument and protective systems, Management of change, Network Technologies, Safe and reliable operations, Safety critical equipment, Site Acceptance Testing {+ 1 more} Legal Disclaimer: We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status. Individuals with an accessibility need may request an adjustment/accommodation related to bp's recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process, please contact us. If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

The Sr. Mechanical Engineer applies engineering techniques to design, install, modify, analyze, repair and test tools, engines, machines and other mechanically functioning equipment. Leads and supports the mechanical design, testing, and production of electrical machines as well as the design of electronics packaging for high altitude aerospace applications. Leads or supports mechanical packaging development effort for electronic equipment that withstand stringent environmental requirements (i.e., mass, volume, thermal, vibration). Manages mid-size development projects outsourced to sub-contractors (development of a system, equipment or components). Location: Hood River, OR Position Responsibilities Leads or supports the thermal, structural, dynamic, and fluid flow analysis efforts for electronics equipment Leads the testing and data collection in the laboratory and the field Models the mechanical devices and selects the proper material Performs stress and fatigue analysis; Performs thermal analysis and selects bonding material Develops mechanical drawings and specifies the dimensional tolerances Develops assembly instructions and test procedures Develops test plans and test procedures to verify designs Works on complex issues where analysis of situations or data requires an in-depth knowledge of variable factors Executes team assignments effectively following the given schedule, milestone, and available resources. May coordinate activities of other personnel (Team Lead). Other duties as assigned Basic Qualifications (Required Skills & Experience) Minimum 8 - 12 years of relevant technical experience in Mechanical Engineering, of which a minimum of 5 years in developing for production rotating electrical machines, electronics equipment packaging solution, and/or mechanical devices solutions for industrial and aerospace applications Experienced in developing requirements specification for mechanical subsystems and according to MIL-STD 961D standard or equivalent Has sufficient proficiency with the following CAD /CAE tools to perform one's position responsibilities: SolidWorks for mechanical modeling. ANSYS for structural and fatigue analysis ANSYS Icepack for thermal analysis. Extensive experience with Solid Works and designing electrical rotating machines for high- performance applications Extensive experience with thermal management tradeoffs and solutions and materials properties Experienced with bonding techniques for extreme environmental conditions using different adhesives Experienced with manufacturing methodologies of electrical machines Experienced with creating and maintaining product document tree Experienced with creating and maintaining products bill of materials (BOM) Experienced with test and measurement techniques, such as torque transducer calibration and instrumentation Other Qualifications & Desired Competencies MS degree in Mechanical Engineering is preferred Recognition by a reputable international engineering society such as ASME at the senior membership level or higher is desired Demonstrates familiarity with MIL-STD-810 or DO-160 Demonstrates familiarity with MIL-STD 961D standards (or equivalent) for developing subsystem technical specifications Demonstrates full understanding & knowledge of engineering principles in the technical discipline and successfully works independently Effectively articulates concepts and ideas to both technical and non-technical staff Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties Displays strong initiative and drive to accomplish goals and meet company objectives Takes ownership and responsibility for current and past work products Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company Has effective problem-solving, analytical, interpersonal and communication skills (Verbal and written) Focuses on teamwork, collaboration and puts the success of the team above one's own interests Physical Demands Ability to work in an office and production environment (Constant) Required to sit and stand for long periods; talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Frequent) The salary range for this role is: $107,370 - $152,250 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship is required. Secret or Top Secret clearance, or the ability obtain a clearance is desired.

Employee Type: Regular-Full time Union/Non: Join Our Team as a Senior Mechanical Engineer! Are you ready to take on a pivotal role in shaping the future of energy infrastructure? In this position, you'll lead the design of compressor station facilities for expansion and maintenance projects, ensuring every detail meets company and industry standards. You'll collaborate closely with cross-functional teams-including Project Execution, Transmission, and Shared Services-to deliver innovative solutions that align with project goals, budgets, and schedules. If you thrive in a dynamic environment and want to make a meaningful impact, we'd love to hear from you! What You Will Do: Ensures that all compressor station, metering station and storage facilities are designed in accordance with all regulations, applicable industry codes and corporate standards Defines the scope, schedule and budget for the design and materials for compressor station facility projects Manages the execution of the design deliverables by a third-party engineering firm against the project budget and schedule Reviews and approves design deliverables for example drawings, technical reports and material listing sheets Reviews vendor materials quotations, prepares technical evaluations, and recommends to the supervisor selections based on technical merit along with price and delivery. For example, meters, equipment vessels, buildings, pipe, valves and fittings Assists with the commissioning of newly installed compressor station facilities when required. Reviews lessons learned from past projects and incorporates recommendations into future designs Who You Are: You have the following: BSME Engineering degree Minimum of 7 years related experience Preferred: PE designation Capable of working independently, managing multiple projects and prioritizing tasks accordingly Problem solves issues through use of standards, modification of standards and/or previous experience Effectively communicates technical issues and impacts to other technical and non-technical staff Working Conditions: 80% of work is office based working with multiple project teams 20% of time is in the field scoping projects or supporting construction and commissioning activities Time sensitive deliverables Work requires strong computer skills typically using Microsoft Office applications Enbridge provides competitive workplace programs that differentiate us and offer flexibility to our team members. Enbridge's FlexWork (Hybrid Work Model) offers eligible employees the opportunity to work variable daily schedules with a flexible start and end time, to opt for a compressed work week schedule, or the option to work from home on designated days. Role requirements determine your eligibility for each option. #LI-Hybrid #joinourteam Physical Requirements: Include but are not limited to: Grasping, kneeling, light - moderate lifting (objects up to 45 pounds), reaching above shoulder, repetitive motion, sitting, standing, visual requirement (able to see screens, detect color coding, read fine print), hearing requirement Mental Requirements: Include but are not limited to: Ability to: understand, remember and apply oral and/or written instructions or other information, understand sophisticated problems and collaborate/explore alternative solutions, organize thoughts and ideas into understandable terminology, organize and prioritize work schedule on a short-term basis, make decisions which have moderate impact on the immediate work unit and monitor impact outside this area, understand and follow basic instructions and guidelines, complete routine forms, compose letters, outlines, memoranda and basic reports and connect with individuals via telephone At Enbridge, we are dedicated to our core value of Inclusion. We are proud to be an Equal Opportunity Employer. We are committed to providing employment opportunities to all qualified individuals, without regard to age, race, color, national or ethnic origin, religion, sex, sexual orientation, gender identity or expression, marital status, family status, veteran status, Indigenous status, disability, or any other reason protected by federal, state, or local law. Applicants with disabilities can request accessible formats, communication supports, or other accessibility assistance by contacting ********************. Information For Applicants: Applications can be submitted via our online recruiting system only. We appreciate your interest in working with us; however, only those applicants selected for interviews will be contacted. Final candidates for this position may be required to undergo a security screening, including a criminal records check. To learn more about us, visit ****************

Job Title: Principal Engineer - FPGA/ASIC Design Working Pattern: Full-time Working location: Indianapolis, IN or West Lafayette, IN (Hybrid Work Schedule) Rolls-Royce is looking for a Principal Engineer - FPGA/ASIC Design Specialist (Field Programmable Gate Arrays / Application Specific Integrated Circuit) Design Specialist to join our growing team. This is an exciting opportunity to work on flagship Rolls-Royce programs and play a vital role in solving some of the most complex and interesting technological challenges in the industry while being part of a global, multi-disciplinary team. In this role, you will travel up to 25% between Rolls-Royce sites in Indianapolis and West Lafayette, IN as needed for work. In this technical role, you will design, verify, integrate, and test FPGA/ASIC solutions, which will be integrated in current and future Rolls-Royce engine control system products. You will be responsible for developing FPGA/ASIC architectures, coding, running simulations, synthesis, creating test benches, and preparing documentation to be reviewed by certification authorities. ***This position is eligible for a hybrid work schedule allowing for remote and in-office days each week. Hybrid work arrangements are subject to change based on business needs and/or changes in company policy. All hybrid employees must have a secure, high-speed internet connection and an appropriate workspace that complies with applicable information security and confidentiality requirements. Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. Rolls-Royce has been recognized as the top employer in the Engineering & Manufacturing category on the prestigious Forbes Top Employers for Engineers list for 2025. This ranking highlights our commitment to innovation, employee development, and fostering a collaborative environment where engineers can thrive. Be part of a team that sets the industry standard and drives groundbreaking solutions. At Rolls-Royce, we are committed to creating a workplace where all employees feel respected, supported, and empowered to do their best work. We foster a welcoming and innovative work environment that invests in you, giving you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. Rolls-Royce is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any protected characteristics. What you will be doing With this attractive opportunity you will get a chance to: Participate in all phases of project, to produce detailed design documentation, verification plans and reports The design and development of all custom digital devices (ASIC or FPGA), to support RR electronic engine control units The verification of complex products that use FPGAs and/or ASICs to DO-254 Develop RTL utilizing a hardware description language (e.g. VHDL, Verilog, and/or SystemVerilog) and debug the design via simulation tools Expertise achieving timing closure on FPGA designs and generating test benches Evaluate the process flow including but not limited to high level design, synthesis, place and route, timing constraints and power utilization Who we're looking for: At Rolls-Royce we put safety first, do the right thing, keep it simple and make a difference. These principles form the behaviours that guide us and are an essential component of our assessment process. They are the fundamental qualities that we seek for all roles. Basic Requirements: Bachelor's degree in Electronics Engineering and/or Computer Engineering with 5+ years of experience, OR Master's degree in Electronics Engineering and/or Computer Engineering with 3+ years of experience, OR PhD in Electronics Engineering and/or Computer Engineering In order to be considered for this role, you must be a U.S. Citizen Preferred Requirements: Validate the FPGA hardware in the lab using test equipment (oscilloscopes, logic analyzers) and debug tools (e.g ILA, JTAG) Experience in scripting with languages such as TCL, Python, Shell scripts Able to work with Windows and Linux development environment Demonstrable experience in version control, such as Git, SVN Experience of Actel & Xilinx tool flows to implement complete designs Development of model-based systems with digital engineering toolsets (MATLAB, Simulink and/or similar) Knowledge of systems engineering, and robust design tools and techniques coupled with the latest model-centric development approaches Experience with Cameo Systems Modeler (MagicDraw) or similar SysML modelling software What we offer We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home, or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. For fully remote roles, employees can live in any state except Idaho, Nebraska, Nevada, Vermont, and Wyoming. Relocation assistance is available for this position. Closing date: November 30th, 2025 #CLOLI Job CategoryElectrical and Electronics Job Posting Date11 Dec 2025; 00:12 Pay Range$113,179 - $183,916-Annually Location: Indianapolis, IN Benefits Rolls-Royce provides a comprehensive and competitive Total Rewards package that includes base pay and a discretionary bonus plan. Eligible employees may have the opportunity to enroll in other benefits, including health, dental, vision, disability, life and accidental death & dismemberment insurance; a flexible spending account; a health savings account; a 401(k) retirement savings plan with a company match; Employee Assistance Program; Paid Time Off; certain paid holidays; paid parental and family care leave; tuition reimbursement; and a long-term incentive plan. The options available to an employee may vary depending on eligibility factors such as date of hire, employment type, and the applicability of collective bargaining agreements.

Responsibilities Support engineering in the design/construction/commissioning of midstream facilities Participation in technical reviews and provide technical support to other company departments Support developing corporate standards surrounding control system design, including but not limited to hardware, panel design, software, and HMI layout Support developing corporate standards and practices associated with the instrumentation for the purpose of controls and monitoring midstream facilities Manage 3rd party contractors in the implementation of project execution associated with I&E and control systems Review of 3rd party contractor engineering packages Responsible for receiving, testing, analyzing, recording, and reporting testing results to appropriate Automation/Measurement/Operations Teams Effectively communicating with third party vendors and maintaining a good rapport with vendors Support operations in upgrades and modification to existing facilities Bachelor's degree in chemical or electrical engineering is preferred. Travel to field locations10 - 25% Hybrid schedule working in office Monday, Tuesday, Thursday and working remote Wednesday and Friday. Monday-Thursday are 9 hours and Fridays are 4 hours. Qualifications Minimum of 5 years' experience in the design, implementation, and optimization of control systems within midstream, (gas, oil, and water), processing facilities Experience in the commissioning/startup of midstream facilities Strong communication and people skills Highly proficient in desktop applications, (spreadsheets, email, word processing applications, etc.) Experience in determining and performing RTU/EFM, controller, and instrumentation tests needed for analysis and reporting to engineering & operations. Must have high level of knowledge of natural gas processing and process control Strong working knowledge of NEC code, API RP 500, applicable regulations surrounding electrical power and instrumentation systems in the Oil &Gas industry High level of expertise in industry standard control systems, specifically PLC and DCS controllers and software instructions. Experience with Allen Bradley (SLC, CLX) PLCs & Emerson Delta V DCS highly desirable. Working experience with HMI software including but not limited to Cygnet, Ignition, Wonderware, and RS View/FactoryTalk View. Experience with implementing control strategies commonly utilized in gas treating/compression facilities, including PID control loops, motor controls, alarm management and advanced controls Experience reviewing instrumentation, electrical and control system drawings\= Working experience with instrumentation and control end devices, including but not limited to flow meters, analyzers, level transmitters, pressure transmitters, temperature transmitters, etc Working experience with Allen Bradley, ABB Totalflow, Emerson ROC 800, and other RTU/EFM's

At Linear, we are on a mission to bring magic back to software. To empower product teams to do their best work, we are building an issue tracking and project management tool that combines UI elegance with world-class performance. Founded in 2019, Linear has become the platform of choice for 15,000+ companies to plan and build their products. Linear was set up as a fully remote company from the start. Today, our small but mighty team is distributed across North America and Europe. What unites us is relentless focus, fast execution, and our passion for software craftsmanship. We are all makers at heart and care deeply about the quality of our work. We're looking for a Design Engineer with strong visual taste to help drive our creative initiatives across web and brand. When it comes to design and code, we're looking to work with experienced people who can pick up any problem and solve it. For us, it's both how it works and how it looks. At its core, Linear is a developer tool where speed, interactions, and small details matter. We expect a broad set of design skills and the ability to create high-quality designs, interactions, and prototypes. In this role, you will help communicate Linear's story-what we're building and why it matters-as part of our internal creative agency: the Magic Team. What you'll do You will be responsible for building complex and interactive UI web/app experiences Build beautiful, responsive websites and landing pages Implement creative animations and interactions in code Explore visual design in Figma and translate it to web-native experiences What we're looking for Eye for good design Strong frontend engineering skills Experience building end-to-end websites and landing pages Experience with React and TypeScript A portfolio showcasing a range of technical skills, a creative use of code, and prototyping skills What we offer Interesting and challenging work Work life balance Competitive salary and equity Employee-friendly equity terms (extended exercise) Paid lunch and coffee during work days Work remotely, no commuting to the office Paid co-working space/desk at an office Regular team events and offsites 5 weeks paid vacation 4 months paid parental leave Learn how we think and work Part I and Part II of how we redesigned the Linear UI Read me a story about our mission Why and how we do work trials Linear blog post How we structure our product teams talk by our Head of Product, Nan Yu, at Config 2024 Crafting quality that endures Config keynote by our Co-founder & CEO, Karri Saarinen Building for quality: Our Investment in Linear Accel Series B blog post

Job Title: System Design Integration Engineer Working Pattern: Full Time Working location: Indianapolis, IN/Hybrid - 3 Office Days/Week An exciting opportunity is available for a Systems Engineer on the JSF LiftSystem program. The mechanical or aerospace engineer will have a sound knowledge of systems engineering, strong experience with robust design tools, testing, and analytical methods. You will be responsible for: resolving complex fleet issues; defining requirements on new activities; designing and integrating tests, products, systems & product systems; performing technical analysis; verifying products, systems, and components throughout the product lifecycle. You will also be a key contributor in the development of the whole system architecture and overseeing functional and physical interactions within the propulsion system and at the airframe interface. This role is well suited for a growing or experienced engineer seeking to broaden their technical background, increase their experience on high impact and high-profile projects, and gain cross functional technical leadership experience. This role is a hybrid role where remote working can be combined with in office time as required. Why Rolls-Royce: Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. Rolls-Royce has been recognized as the top employer in the Engineering & Manufacturing category on the prestigious Forbes Top Employers for Engineers list for 2025. This ranking highlights our commitment to innovation, employee development, and fostering a collaborative environment where engineers can thrive. Be part of a team that sets the industry standard and drives groundbreaking solutions. At Rolls-Royce, we are committed to creating a workplace where all employees feel respected, supported, and empowered to do their best work. We foster a welcoming and innovative work environment that invests in you, giving you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. Rolls-Royce is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any protected characteristics. What you will be doing Lead, influence interdisciplinary teams, technologists and coordinate with subsystem teams to solve complex problems and deliver system solutions at whole engine level Proficiency with system integration & system modelling tools. Very strong use and understanding of systems engineering concepts, principles, and theories to define/optimize whole engine design and integration Coordinate activities across stakeholders to define, manage and meet interdependencies between subsystems to meet requirements Experience in building and assessing systems engineering and architecture models using a modelling methodology to conduct technical assessments and recommendations that inform key technical decisions. Represents the propulsion systems function to Rolls-Royce customers and provides technical support/analysis supporting product development through all design phases (new engine development through fleet support) Progress system through gated reviews. Support or lead risk assessments, flight clearance reviews, safety reviews, product certification, and technical audits from a functional aspect Who we're looking for: At Rolls-Royce we put safety first, do the right thing, keep it simple and make a difference. These principles form the behaviours that guide us and are an essential component of our assessment process. They are the fundamental qualities that we seek for all roles. Basic Qualifications: A Bachelor's degree in Engineering with 2+ years of related experience (see preferred qualifications below) OR; A Masters degree in Engineering In order to be considered for this opportunity, you must be a US Citizen. Preferred Qualifications: Experience with modeling software such as NX, setting test requirements, and post processing of data. Very strong use and understanding of systems engineering concepts, principles, and theories to define/optimize whole engine design and integration Experience with requirements management. Previous experience with analytical software similar to ANSYS Programming skills such as Visual Basic, Matlab, Python, PERL, C++ Experience with Control system hardware or with Performance methods or tools Analytical ability to deal with challenging engineering problems and to determine root case and corrective action Interpersonal skills to work effectively in a team environment; willingness to accept responsibility and take initiative Ability to plan and coordinate assigned work with other groups and drive to finish assigned tasks on schedule What we offer We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home, or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. Relocation assistance is available for this position. Global Grade/Level: GG10 Closing date: 12/31/2025 #CLOLI Job CategoryMechanical Systems Job Posting Date04 Dec 2025; 00:12 Pay Range$90,985 - $136,477-Annually Location: Indianapolis, IN Benefits Rolls-Royce provides a comprehensive and competitive Total Rewards package that includes base pay and a discretionary bonus plan. Eligible employees may have the opportunity to enroll in other benefits, including health, dental, vision, disability, life and accidental death & dismemberment insurance; a flexible spending account; a health savings account; a 401(k) retirement savings plan with a company match; Employee Assistance Program; Paid Time Off; certain paid holidays; paid parental and family care leave; tuition reimbursement; and a long-term incentive plan. The options available to an employee may vary depending on eligibility factors such as date of hire, employment type, and the applicability of collective bargaining agreements.

NOTE: This position is eligible for full-time remote work based within the contiguous United States. Responsible for technical supplier oversight regarding manufacturing and manufacturing development projects. The manufacturing engineer will provide consultation to NuScale design organizations regarding manufacturing, specify and collect product manufacturing requirements including all standards and specifications, and act as a primary point of contact between NuScale design organizations and manufacturing suppliers for technical information and communications. The manufacturing engineer will apply industry expertise, codes and standards, and regulatory guidance in the general area of primary nuclear reactor system manufacturing and supply chain development. ESSENTIAL DUTIES AND RESPONSIBILITIES: * Interact daily with NuScale design organizations to interpret their needs and requirements to manufacturing entities. * Assists the NuScale design organizations by applying expert knowledge of product design, fabrication, assembly, tooling, and materials. * Perform subcontract technical lead duties by preparing requirements documents and schedules, leading the technical aspects of assigned manufacturing and manufacturing development projects. * Review manufacturing documentation of supplier to ensure compliance with specifications, codes, standards, and QA/QC requirements. * Develop, check, or review internal drawings, studies, and specifications. * Review engineering deliverables applying in-depth knowledge to achieve goals and influence decision making. * Monitoring supplier performance to ensure compliance with procedures, applicable codes, practices, QA/QC policies, performance standards and specifications. * Manage supplier manufacturing mockup planning and test results to ensure desired outcomes are achieved. * Leading surveys of new manufacturing suppliers to assess capabilities and documenting survey results. * Perform/coordinate grading of technical proposals and working with Procurement team for supplier selection. * Assist Product Cost Management team with cost estimates and value engineering studies. * Prepares product and process reports by collecting, analyzing, and summarizing manufacturing information and trends including statistical analysis of manufacturing trends. * Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies. * Performs special studies and manufacturing engineering analysis to support supplier development. * Performs other duties as assigned. CORE COMPETENCIES: To perform the job successfully, the individual should demonstrate competencies in performing the essential functions of this position by performing satisfactorily in each of these competencies. * Problem solving: Identifies and resolves problems in a timely manner, gathers and reviews information appropriately. Uses own judgment and acts independently; seeks input from other team members as appropriate for complex or sensitive situations. * Oral/written communication: Listens carefully and speaks clearly and professionally in all situations. Edits work for accuracy and clarity, is able to create, read and interpret complex written information. Ability to develop strong interpersonal networks within the organization. * Planning/organizing: Prioritizes and plans work activities, organizes personal and project timelines and deadlines, tracks project timelines and deadlines, and uses time efficiently. * Adaptability: Adapts to changes in the work environment, manages competing demands and is able to deal with frequent interruptions, changes, delays, or unexpected events. * Dependability: Consistently on time and at work, responds to management expectations and solicits feedback to improve performance. * Team Building: Capable of developing strong interpersonal networks and trust within the organization. * Safety Culture: Adheres to the NuScale Safety culture and is expected to model safe behavior and influence peers to meet high standards. * Quality Assurance: Commits to the understanding and implementation of quality assurance regulations, standards and guidelines of 10 CFR 50 Appendix B, 10 CFR 21, and ASME NQA-1. MINIMUM SKILLS, QUALIFICATIONS AND ABILITIES: * Education/Certification: A minimum of a B.S. degree in Manufacturing, Welding, or Mechanical Engineering from a four-year accredited college or university is required. An advanced degree is preferred. Professional Engineer (PE) license is preferred. * Experience: Minimum of eight years of engineering experience in development and oversight of manufacturing of ASME vessels and components is required. Manufacturing development for extremely complex designs, components, or systems in a regulated environment is required. Demonstrated project management skills along with strong technical writing skills and use of software including Product Lifecycle Management (PLM), navigation of CAD/CAM systems, and normal MS Office software is required. * Industry Requirements: Eligible to work under Department of Energy 10 CFR Part 810. * Travel Requirements: Able to travel to local, national, and international suppliers using common forms of transportation. Anticipate 10%-20% travel. Position will require presence in supplier manufacturing shop environments and will require familiarity with shop safety requirements and working conditions. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Ability to understand and communicate clearly using a phone, personal interaction, and computers. * Ability to learn new job functions and comprehend and understand new concepts quickly and apply them accurately in a rapidly evolving environment. * The employee frequently is required; to sit and stand; walk; bend, use hands to operate office equipment; and reach with hands and arms. * Ability to travel nationally and locally using common forms of transportation. Disclaimer: Employee(s) must perform the essential duties and responsibilities with or without reasonable accommodation efficiently and accurately without causing significant safety threat to self or others. The above statements are intended to describe the general nature and level of work being performed by employee(s) assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and/or skills required of all employees in this classification. NuScale Power, LLC is an equal opportunity employer and does not discriminate against otherwise qualified applicants on the basis of race, color, creed, religion, ancestry, age, sex, marital status, national origin, disability or handicap, or veteran status. Pay and Benefits: The target pay range for this position is $124,400 - $150,138 annually. The full pay range is $111,531 - $174,446 annually At NuScale, compensation decisions are determined using factors such as relevant job-related skills, full-time working experience, education and training, equity within the department. For information on employee benefits, please visit our Careers Overview page: Employee Benefits | NuScale Power

Job Title: Senior Electronics Design Engineer-Nuclear Hardening & Survivability Working Pattern: Full-time Working location: Indianapolis, IN We have an exciting new opportunity for Senior Electronics Design Engineer. As the Senior Electronics Design Engineer, you will be responsible for electronics hardware circuit design and development to analog, digital, mixed signal design (ADCs/DACs), and power supply design for airworthy/certified electronic engine controller and monitoring system for wide range of gas turbine engines. In this exciting role, as the Senior Electronics Design Engineer you may be involved at any stage of a project including the initial brief for a concept, the design and development stage, testing of prototypes and the final manufacture and implementation of a new product or system. You will usually work in project teams with colleagues in other branches of engineering. Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. Rolls-Royce has been recognized as the top employer in the Engineering & Manufacturing category on the prestigious Forbes Top Employers for Engineers list for 2025. This ranking highlights our commitment to innovation, employee development, and fostering a collaborative environment where engineers can thrive. Be part of a team that sets the industry standard and drives groundbreaking solutions. At Rolls-Royce, we are committed to creating a workplace where all employees feel respected, supported, and empowered to do their best work. We foster a welcoming and innovative work environment that invests in you, giving you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. Rolls-Royce is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any protected characteristics. What you will be doing With this attractive opportunity you will get a chance to: Concept, design and execute electronics circuit design for control and monitoring system Schematic creation and PCB layout support Performs trade study analysis, tolerance analysis, and various simulations to support the design's accuracy and efficiency Perform worst case circuit calculation and analysis (tolerance, stress and FMEA analysis) Develop electrical hardware products in the lab through testing, diagnosing, and inspection through development life cycle Compile functional description and design assurance testing results into a report sufficient for certifying authorities Who we're looking for: At Rolls-Royce we put safety first, do the right thing, keep it simple and make a difference. These principles form the behaviours that guide us and are an essential component of our assessment process. They are the fundamental qualities that we seek for all roles. Basic Requirements: Bachelor's degree in Aerospace, Mechanical, Electrical or Computer Engineering with 2+ years of product development engineering experience, OR Master's degree in in Aerospace, Mechanical, Electrical or Computer Engineering, OR PhD in degree in in Aerospace, Electrical, Mechanical or Computer Engineering Master's degree in Electronics/Electrical Engineering, OR JD/PhD In order to be considered for this role, you must be a US Citizen Preferred Requirements: 5+ years' experience in circuit design Experience with New Product Introduction (NPI) Strong Electronic Hardware Design experience Experience with schematic capture tools: Allegro-Cadence/Altium Designer Experience with Root Cause Analysis and other problem-solving techniques Experience with power converters, filtering, protection, EMI reduction techniques Analyze and translate high level requirements into a validated design for electrical components What we offer We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home, or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. For fully remote roles, employees can live in any state except Idaho, Nebraska, Nevada, Vermont, and Wyoming. Relocation assistance is available for this position. Closing date: December 31st, 2025 #CLOLI Job CategoryElectrical and Electronics Job Posting Date21 Nov 2025; 00:11 Pay Range$90,985 - $ 147,850-Annually Location: Indianapolis, IN Benefits Rolls-Royce provides a comprehensive and competitive Total Rewards package that includes base pay and a discretionary bonus plan. Eligible employees may have the opportunity to enroll in other benefits, including health, dental, vision, disability, life and accidental death & dismemberment insurance; a flexible spending account; a health savings account; a 401(k) retirement savings plan with a company match; Employee Assistance Program; Paid Time Off; certain paid holidays; paid parental and family care leave; tuition reimbursement; and a long-term incentive plan. The options available to an employee may vary depending on eligibility factors such as date of hire, employment type, and the applicability of collective bargaining agreements.

NOTE: This position is available for full-time remote work within the contiguous United States. Those living within a 30-mile radius of a NuScale physical office will be required to work in-office, Responsible for technical supplier oversight regarding manufacturing and manufacturing development projects, specifically related to the core components. The core components are comprised of the nuclear fuel assemblies, control rod assemblies, primary and secondary neutron sources and the ECCS supplemental boron system pellets. The manufacturing engineer will provide assistance to NuScale design organizations regarding manufacturability, specify and collect product manufacturing requirements including all standards and specifications. This role also acts as a point of contact between NuScale design organizations and manufacturing suppliers for technical information and communications. The manufacturing engineer will apply industry expertise, codes and standards, and regulatory guidance in the general area of core components manufacturing and supply chain development. ESSENTIAL DUTIES AND RESPONSIBILITIES: Interact daily with NuScale design organizations to interpret their needs and requirements to manufacturing entities. Educate the NuScale design organizations by sharing knowledge of product design, fabrication, assembly, tooling, and materials. Identify opportunities for cost or schedule improvement. Perform assigned project engineering duties by preparing requirements documents and schedules, coordinating and monitoring the technical aspects of assigned manufacturing and manufacturing development projects. Review manufacturing documentation of supplier to ensure compliance with specifications, codes, standards, and QA/QC requirements. Develop, check, or review internal drawings, studies, and specifications Review engineering deliverables using professional expertise and judgement. Monitoring supplier performance to ensure compliance with procedures, applicable codes, practices, QA/QC policies, performance standards and specifications, with occasional travel (up to 20%) to supplier manufacturing sites. Leads efforts to understand capabilities of new manufacturing suppliers and documenting survey results. Perform/coordinate grading of technical proposals and working with Procurement team for supplier selection. Provide Product Cost Management team with cost estimates and value engineering studies. Prepares product and process reports by collecting, analyzing, and summarizing manufacturing information and trends including statistical analysis of manufacturing trends under supervision. Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies. Performs other duties as assigned. CORE COMPETENCIES: To perform the job successfully, the individual should demonstrate competencies in performing the essential functions of this position by performing satisfactorily in each of these competencies. Problem solving: Identifies and resolves problems in a timely manner, gathers and reviews information appropriately. Uses own judgment and acts independently; seeks input from other team members as appropriate for complex or sensitive situations. Oral/written communication: Listens carefully and speaks clearly and professionally in all situations. Edits work for accuracy and clarity, is able to create, read and interpret complex written information. Ability to develop strong interpersonal networks within the organization. Planning/organizing: Prioritizes and plans work activities, organizes personal and project timelines and deadlines, tracks project timelines and deadlines, and uses time efficiently. Adaptability: Adapts to changes in the work environment, manages competing demands and is able to deal with frequent interruptions, changes, delays, or unexpected events. Dependability: Consistently on time and at work, responds to management expectations and solicits feedback to improve performance. Team Building: Capable of developing strong interpersonal networks and trust within the organization. Safety Culture: Adheres to the Corporate Safety culture and is expected to model safe behavior and influence peers to meet high standards. Quality Assurance: Commits to the understanding and implementation of quality assurance regulations, standards, and guidelines of 10 CFR 50 Appendix B, 10 CFR 21, and NQA-1. MINIMUM SKILLS, QUALIFICATIONS AND ABILITIES: Education/Certification: A minimum of a B.S. degree in Manufacturing, Nuclear, or Mechanical Engineering from a four-year accredited college or university is required. Working toward Professional Engineer (PE) license is preferred. Experience: 5+ years of engineering experience in design or manufacturing of nuclear fuel, control rod assemblies, and neutron source assemblies. Manufacturing development of designs, components, or systems is preferred. Demonstrated project engineering skills along with sound technical writing skills and normal MS Office software is required. Must be able to demonstrate familiarity with shop safety requirements and working conditions. Industry Requirements: Eligible to work under Department of Energy 10 CFR Part 810. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to understand and communicate clearly using a phone, personal interaction, and computers. Ability to learn new job functions and comprehend and understand new concepts quickly and apply them accurately in a rapidly evolving environment. The employee frequently is required; to sit and stand; walk; bend, use hands to operate office equipment; and reach with hands and arms. Ability to travel nationally and locally using common forms of transportation. Anticipate 10%-20% travel. Disclaimer: Employee(s) must perform the essential duties and responsibilities with or without reasonable accommodation efficiently and accurately without causing significant safety threat to self or others. The above statements are intended to describe the general nature and level of work being performed by employee(s) assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and/or skills required of all employees in this classification. NuScale Power, LLC is an equal opportunity employer and does not discriminate against otherwise qualified applicants on the basis of race, color, creed, religion, ancestry, age, sex, marital status, national origin, disability or handicap, or veteran status. Pay and Benefits: The target pay range for this position is $111,105 - $134,093 annually. The full pay range is $99,611 - $155,803 annually. At NuScale, compensation decisions are determined using factors such as relevant job-related skills, full-time working experience, education and training, equity within the department. For information on employee benefits, please visit our Careers Overview page: Employee Benefits | NuScale Power

Due to continued growth, our Power Delivery group is seeking Substation Principal Engineers. In this role, you will have the opportunity to participate and contribute toward complex projects in both a design and project leadership capacity, interfacing with our current and future customers directly while working on challenging and exciting low to high voltage substation engineering projects. This position can be based in the following office locations: Orlando, FL Palm Beach Gardens, FL Tampa, FL Houston, TX Remote, or other ENERCON office locations will also be considered LI-MB1 Responsibilities Imagine a day where you lead the creation of powerful, reliable substations-uniting engineering expertise, precise design, and seamless collaboration to bring critical energy infrastructure to life. Substation Design Expertise: Act as the subject matter expert for detailed 4kV -500kV substation design and/or protection control and SCADA design projects. Typical substation design deliverables include one-line drawings, three-line drawings, general arrangement drawings, section and plan views, conduit and cable plan & schedule, grounding plan, foundation plan drawings, Bill of materials and construction aid documentation. Typical substation protection and control engineering projects deliverables include relay one-line drawings, AC and DC schematic drawings, Panel front drawings, Bill of materials, Control house layout, wiring drawings, construction letters. Perform substation design calculations and analysis such as ground grid analysis and design, lightning protection studies, lighting design, rigid bus calculations, AC and DC voltage drop calculations. Perform physical design in MicroStation, AutoCAD or similar CAD tools on an as needed basis Project Leadership & Coordination: Lead substation design projects on an as needed basis. Coordinate projects with different teams for Protection & Controls, Structural, Civil, Transmission and Design/Drafting teams. Work closely with peers to ensure accurate and on-time delivery of electrical design that will meet client and industry standards and specifications and meet good engineering practices. Produce project cost estimates, schedules, and budgets for projects. Other duties as assigned Protection & Control Engineering: Review Protection and control relay settings files and work with relay settings engineers to ensure the relay settings are correct Quality Assurance: Perform quality control checks on substation physical engineering and/or protection and control design project Technical Documentation & Specifications: Develop technical equipment, construction specifications and work scopes Construction & Commissioning Support: Provide on-site technical support for select ENERCON clients during construction and commissioning as required #LI-MB1 Qualifications Bachelor's Degree in Electrical Engineering, Mechanical Engineering or Civil Engineering with 10 or more years' experience in substation protection and control and physical engineering design Experience with MicroStation, AutoCAD and/or Bluebeam Experience working with WinIGS and CDEGs P.E license is preferred in this role but not a requirement Familiarity with NESC, IEEE and other applicable codes and standards Willingness to enter energized electric substations with proper training and PPE Ability and willingness to travel 10% of the time. To include travel for project and marketing meetings as well as to clients' construction sites, requiring a valid driver's license, and having access to a car. Most travel is expected to be within driving distance of the ENERCON office at this time Self-driven in time management to meet deadlines and provide accurate deliverables Proficient with typical office software such as Word, Excel, PowerPoint, Outlook, and Windows Pay Range USD $125,000.00 - USD $185,000.00 /Yr. Additional Information About ENERCON: At Enercon Services, Inc. (ENERCON), we're driven by our people-and we're proud to offer rewarding careers in a culture of excellence. We provide a comprehensive benefits package and professional development opportunities that support your long-term growth. What We Offer: Enjoy full benefits for you and your dependents starting day one, no waiting period Flexible work arrangements, including hybrid and alternative schedules 401(k) with employer matching Tuition reimbursement Professional Engineer (PE) license support and incentives Want to see the full picture? Click HERE to see our Comprehensive Benefits Salary Range Information: If a salary range is listed, it reflects the typical range for this full-time position based on the role, level, and location. Individual compensation within the range will be determined by factors such as work location, relevant experience, job-related skills, and education or training. Eligibility to Work: Candidates must be legally eligible to work in the US without requiring current or future sponsorship. Ability to pass a pre-employment and random drug and alcohol screenings, ENERCON and client specific background checks, and annual motor vehicle record (MVR) according to company and client policies. Equal Opportunity Employer: ENERCON does not discriminate in employment opportunities or practices based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by law. Connect with Us: *************** | LinkedIn

NOTE: This position is available to be fully remote. However, candidates available to be based in our Houston, TX office location will be given priority preference. Responsible for technical supplier oversight regarding manufacturing and manufacturing development projects, specifically related to NuScale Power Module. The manufacturing engineer will provide consultation to NuScale design organizations regarding manufacturing, specify and collect product manufacturing requirements including all standards and specifications, and generally act as a primary point of contact between NuScale design organizations and manufacturing suppliers for technical information and communications. The manufacturing engineer will apply industry expertise, codes and standards, and regulatory guidance in the general area of NuScale Power Module manufacturing and supply chain development. ESSENTIAL DUTIES AND RESPONSIBILITIES: * Interact daily with NuScale design organizations to interpret their needs and requirements to manufacturers. * Contribute to the NuScale design organizations by applying knowledge of product design, fabrication, assembly, tooling, and materials. * Perform subcontract technical lead duties by preparing requirements documents and schedules, coordinating and monitoring the technical aspects of assigned manufacturing and manufacturing development projects. * Review manufacturing documentation of supplier to ensure compliance with specifications, codes, standards, and QA/QC requirements. * Develop, check, or review internal drawings, studies, and specifications * Review engineering deliverables and initiate appropriate corrective actions * Monitor supplier performance to ensure compliance with procedures, applicable codes, practices, QA/QC policies, performance standards and specifications. * Manage supplier manufacturing mockup planning and test results to ensure desired outcomes are achieved. * Perform surveys of new manufacturing suppliers to assess capabilities and documenting survey results. * Perform/coordinate grading of technical proposals and working with Procurement team for supplier selection. * Assist Product Cost Management team with cost estimates and value engineering studies. * Prepare product and process reports by collecting, analyzing, and summarizing manufacturing information and trends including statistical analysis of manufacturing trends. * Maintain professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies. * Performs special studies and manufacturing engineering analysis to support supplier development * Perform other duties as assigned. CORE COMPETENCIES: To perform the job successfully, the individual should demonstrate competencies in performing the essential functions of this position by performing satisfactorily in each of these competencies. * Problem solving: Identifies and resolves problems in a timely manner, gathers and reviews information appropriately. Uses own judgment and acts independently; seeks input from other team members as appropriate for complex or sensitive situations. * Oral/written communication: Listens carefully and speaks clearly and professionally in all situations. Edits work for accuracy and clarity, Is able to create, read and interpret complex written information. Ability to develop strong interpersonal networks within the organization. * Planning/organizing: Prioritizes and plans work activities, organizes personal and project timelines and deadlines, tracks project timelines and deadlines, and uses time efficiently. * Adaptability: Adapts to changes in the work environment, manages competing demands and is able to deal with frequent interruptions, changes, delays, or unexpected events. * Dependability: Consistently on time and at work, responds to management expectations and solicits feedback to improve performance. * Team Building: Capable of developing strong interpersonal networks and trust within the organization. * Safety Culture: Adheres to the NuScale Safety culture and is expected to model safe behavior and influence peers to meet high standards. * Quality Assurance: Demonstrates understanding and implementation of quality assurance regulations, standards and guidelines of 10 CFR 50 Appendix B, 10 CFR 21, and ASME NQA-1. MINIMUM SKILLS, QUALIFICATIONS AND ABILITIES: * Education: A minimum of a B.S. degree in Manufacturing, Welding, or Mechanical Engineering from a four-year accredited college or university is required. An advanced degree is preferred. Working toward Professional Engineer (PE) license is preferred. * Experience: Minimum of five years of full-time engineering work experience in design, manufacturing, or construction of ASME vessels, equipment, or systems is required. Experience with the fabrication of valves or other appurtenances is preferred. Other required experience includes: * Manufacturing development for complex designs, components, or systems in a regulated environment. * Demonstrated project management skills along with strong technical writing skills and use of software including Product Lifecycle Management (PLM), navigation of CAD/CAM systems, and normal MS Office software. * Industry Requirements: Eligible to work under Department of Energy 10 CFR Part 810. * Travel Requirements: Able to travel to local, national, and international suppliers using common forms of transportation. Anticipate 10%-20% travel. Position will require presence in supplier manufacturing shop environments and will require familiarity with shop safety requirements and working conditions. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Ability to understand and communicate clearly using a phone, personal interaction, and computers. * Ability to learn new job functions and comprehend and understand new concepts quickly and apply them accurately in a rapidly evolving environment. * The employee frequently is required; to sit and stand; walk; bend, use hands to operate office equipment; and reach with hands and arms. * Ability to travel nationally and locally using common forms of transportation. Disclaimer: Employee(s) must perform the essential duties and responsibilities with or without reasonable accommodation efficiently and accurately without causing significant safety threat to self or others. The above statements are intended to describe the general nature and level of work being performed by employee(s) assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and/or skills required of all employees in this classification. NuScale Power, LLC is an equal opportunity employer and does not discriminate against otherwise qualified applicants on the basis of race, color, creed, religion, ancestry, age, sex, marital status, national origin, disability or handicap, or veteran status. Pay and Benefits: The target pay range for this position is $111,105 - $134,093 annually. The full pay range is $99,611 - $155,803 annually. At NuScale, compensation decisions are determined using factors such as relevant job-related skills, full-time working experience, education and training, equity within the department. For information on employee benefits, please visit our Careers Overview page: Employee Benefits | NuScale Power

The Company Cypress Creek Renewables is powering a sustainable future, one project at a time. We develop, finance, own and operate utility-scale and distributed solar and storage projects across the country. Fostering a diverse group of innovative thinkers from all backgrounds, Cypress people are drawn to work in a purpose-driven organization. We hope you will join us. Overview We are seeking a highly experienced and versatile Senior Project Engineer to oversee and coordinate external engineering firms supporting the development, design, and delivery of energy infrastructure projects. This includes renewables (solar, wind, battery storage), combined cycle gas turbine (CCGT), high voltage interconnections, as well as geotechnical, electrical, and survey engineering disciplines. The Senior Project Engineer will serve as the technical liaison between internal project teams and third-party engineering consultants, ensuring quality, consistency, and alignment with project goals, regulatory requirements, and industry best practices. Responsibilities Support the Pre-Construction Department by actively participating in the EPC RFP process for assigned projects through contract execution Coordinate and manage third-party engineering firms across multiple disciplines (renewables, CCGT, HV electrical, geotech, etc.) Review scopes of work, deliverables, and schedules for engineering consultants Experience creating and reviewing engineering deliverables (10/30/60/90% design packages) Ensure all engineering activities align with project timelines and budgets Technical support for Supply Chain to review new BESS and PCS technologies, PV inverters, and MV transformers Ongoing Project Support: Misc. tech support for projects in build & RFPs, Review Ordinance / By-laws for Developers Understand the implications of various technical options and guide engineering designs to achieve the best solution for each situation High Voltage coordination of early-stage single line drawings and equipment with the Grid Integration and Procurement teams Review and risk analysis of site layouts Ensure the execution of work in accordance with contracts and policies Develop effective relationships with internal departments, contractors, suppliers, landowners, and other stakeholders Support maintenance of EPCA technical specs and contracts Act as the point of contact between internal development/construction teams and external engineering consultants Support the RFI Process during construction of a project with external EPCs Manage Owner's Engineering Parties Facilitate design coordination meetings and issue resolution discussions. Reinforce a team approach throughout the enterprise, both on projects and internal initiatives Effectively communicate relevant information to superiors Champion change and effectively manage the implementation of new ideas, processes, tools, etc. Support or manage the relationships with all external entities during the development phase of the project such as local government, permitting agencies, pipeline utility companies, and interconnecting utilities Ability to effectively coordinate and handle, under pressure, multiple projects with a high degree of independence and professional judgment to deliver projects within deadlines Additional duties as required Education & Experience Required Minimum of a bachelor's degree in engineering 5-7 years in the renewable energy sector or industrial construction or capital project management Advanced knowledge of power generation technologies, interconnection requirements, and contractor management Competency in analytical problem solving, customer/partner relationships, and technology expertise Experience with High Voltage Interconnection aspects of a projects SOW Proficient in the use of Microsoft Office (i.e. Word, Project, Excel), Procore, SiteTracker, and other discipline-relevant software AutoCAD experience specific to project development Embrace and live by the mission and values of Cypress Creek Renewables Personal Characteristics Self-motivated, capable of performing tasks with minimal supervision Ability to work well in a fast-paced, collaborative environment and meet deadlines Strong organizational skills and multitasking ability Strong interpersonal and relationship-building skills Effective communication skills, both written and verbal Commitment to continuous improvement and analytical problem-solving Ability to create and implement programs/policies involving multiple departments Additional Information Travel is expected to be ~10% In-office, full remote, or hybrid employment will be considered Must hold a valid driver's license Location: The preferred location for this role is for Durham, NC, Asheville, NC or Houston, Texas (Remote). Our team operates on a hybrid schedule, with in-office schedule of three days per week. Benefits: 15 days of Paid Time Off, accrual up to 20 days, 11 observed holidays. 401(k) Match Comprehensive package including medical, dental, vision and health insurance Wellness stipend, family planning stipend, and generous parental leave Tuition Reimbursement Phone Bill Reimbursement Company Swag A note to Recruiting Agencies Cypress Creek Renewables Human Resources team does not accept unsolicited resumes from third party recruiters, staffing firms, or related agencies. The Human Resources team coordinates all recruiting and hiring at our company. We do not accept resumes from third-party recruiters unless authorized by the Human Resources team and if a signed agreement is in place. Any unsolicited resumes will be considered property of CCR and we are not responsible for any related fees. All communication related to recruiting partnerships should ONLY be directed to the Human Resources team. Cypress Creek Renewables is an equal opportunity employer and considers all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status. We are committed to providing a workplace that is inclusive and values diversity, and we encourage candidates from all backgrounds to apply. Please be aware of recruiting scams-official communications will only come *****************, we will never request personal or financial information, and any suspicious activity should be reported to **************.

Job Title: Manufacturing Engineer - Measurement Specialist (CMM) Working Pattern: Onsite 9/80 Working location: Indianapolis, IN As a Manufacturing Engineer-Measurement Specialist, you will develop measurement routines and assist with strategy, inspection and programming. Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. Rolls-Royce has been recognized as the top employer in the Engineering & Manufacturing category on the prestigious Forbes Top Employers for Engineers list for 2025. This ranking highlights our commitment to innovation, employee development, and fostering a collaborative environment where engineers can thrive. Be part of a team that sets the industry standard and drives groundbreaking solutions. At Rolls-Royce, we are committed to creating a workplace where all employees feel respected, supported, and empowered to do their best work. We foster a welcoming and innovative work environment that invests in you, giving you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. Rolls-Royce is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any protected characteristics. What you will be doing: Here you'll have an opportunity to work on the following: Development of parametric CMM programs for families of components by interpreting component blueprints, determining appropriate measurement inspection strategy, GR&R studies, and supplying process correction data. Design and simulate custom probe sets in CAD in conjunction with process fixture design with process Manufacturing Engineers Maintain and support CMM machines and programs including support structure for family systems of programs, result reporting, troubleshooting CMM programs and machines, integration into automation and network, and management of network repository of CMM programs and results data. Work with component design engineering to define best dimensioning scheme around functional need of components/design intent, limitations of GDT, and current measurement technologies Ensure product integrity for component is delivered through alignment of method of measurement with design intent by interfacing with the appropriate design engineering organization. Identify opportunities for new or improved inspection processes to meet current or future requirements and work with CMM software vendors to fix issues and add needed functionality Who we're looking for: At Rolls-Royce we put safety first, do the right thing, keep it simple and make a difference. These principles form the behaviours that guide us and are an essential component of our assessment process. They are the fundamental qualities that we seek for all roles. Basic Requirements: Bachelor's degree in Engineering or Technology and 2+ years of experience in operations or engineering OR Master's degree Engineering or Technology and 0+ years of experience in operations or engineering Experience with CMM machines and software and other measurement technologies Must be a US Citizen to be considered for this role Preferred Requirements: Experience with Zeiss Calypso software and Siemens NX Understanding Windows computer systems, file permissions, network drives Basic understanding of manufacturing processes and technologies Experience with aerospace materials, tolerances and processes, PFMEA, PPAP, Process Excellence (six sigma), and Lean Manufacturing best practices is strongly desirable. Strong written and verbal communication skills are required, as are interpersonal, facilitation, presentation, quantitative, analytical, organizational, and follow up skills. Ability to meet deadlines on multiple projects/programs. Experience in the management and implementation of manufacturing technologies and processes using an MRCL or Technology Readiness Level (TRL) gated process, would be an advantage. What we offer: We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home, or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. For fully remote roles, employees can live in any state except Idaho, Nebraska, Nevada, Vermont, and Wyoming. Expiration Date:11/28/25 Relocation is available for this role if appropriate. Job CategoryManufacturing Engineering Job Posting Date02 Dec 2025; 00:12 Pay Range$90,985 - $136,477-Annually Location: Indianapolis, IN Benefits Rolls-Royce provides a comprehensive and competitive Total Rewards package that includes base pay and a discretionary bonus plan. Eligible employees may have the opportunity to enroll in other benefits, including health, dental, vision, disability, life and accidental death & dismemberment insurance; a flexible spending account; a health savings account; a 401(k) retirement savings plan with a company match; Employee Assistance Program; Paid Time Off; certain paid holidays; paid parental and family care leave; tuition reimbursement; and a long-term incentive plan. The options available to an employee may vary depending on eligibility factors such as date of hire, employment type, and the applicability of collective bargaining agreements.

Job Title: Manufacturing Engineer - Tool Design and Processing Working Pattern: Onsite 9/80 Working location: Indianapolis, IN We are seeking a highly motivated and detail-oriented Manufacturing Engineer to join our Ceramic Matrix Composites (CMC) team working as the technical authority overseeing graphite tooling design and processing. Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. Rolls-Royce has been recognized as the top employer in the Engineering & Manufacturing category on the prestigious Forbes Top Employers for Engineers list for 2025. This ranking highlights our commitment to innovation, employee development, and fostering a collaborative environment where engineers can thrive. Be part of a team that sets the industry standard and drives groundbreaking solutions. At Rolls-Royce, we are committed to creating a workplace where all employees feel respected, supported, and empowered to do their best work. We foster a welcoming and innovative work environment that invests in you, giving you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. Rolls-Royce is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any protected characteristics. What you will be doing: With this new role, you'll have an opportunity to work on the following: Responsible project team lead and technical authority for delivery of CVI (Chemical Vapor Infiltration) graphite tool/de-tool area. Deliver solution for the following: Assembling parts into fixture Removing parts from fixture Weighing components Humidity control equipment Design and develop controlled assembly and disassembly equipment for semi-automated/high volume process that provides control over clamp application/engagement during assembly and minimizes risk of part delamination during disassembly Design (using Siemens NX) and procure graphite tooling. Work with purchasing, inspection process owner(s) and development team to ensure condition of supply is geometrically conforming and will yield conforming product Liaise with inspection process owner(s) to determine and deliver method and process for inspecting used graphite tooling for conformance of infiltration holes and inner geometry Liaise with automation and digital to create graphite tool lifing strategy to ensure life of tooling is properly monitored Liaise with CVI process engineers to develop coating fixed process for new tooling Investigate and implement process to overhaul unserviceable graphite fixturing by cleaning accumulated coating Understand root cause of graphite tool chipping/breakage and implement any corrective actions identified to reduce product cost Who we're looking for: At Rolls-Royce we put safety first, do the right thing, keep it simple and make a difference. These principles form the behaviors that guide us and are an essential component of our assessment process. They are the fundamental qualities that we seek for all roles. Basic Requirements: Associate's degree in Engineering with 4+ years of engineering experience, OR Bachelor's degree in Engineering with 2+ years of engineering experience, OR Master's degree in Engineering, OR PhD in Science, Technology or Engineering, OR In lieu of a degree 6+ years of engineering experience To be considered for this opportunity, you must be a U.S. Citizen or Permanent Resident Preferred Requirements: Experience with Siemens NX Experience designing tooling or fixturing for manufacturing processes Knowledge of GD&T and Drawing Interpretation Understanding of manufacturing processes and technologies Experience with aerospace materials, tolerances and processes, PFMEA, PPAP, Process Excellence (six sigma), and Lean Manufacturing best practices is strongly desirable. Strong written and verbal communication skills are required, as are interpersonal, facilitation, presentation, quantitative, analytical, organizational, and follow up skills. Ability to meet deadlines on multiple projects/programs. Experience in the management and implementation of manufacturing technologies and processes using an MRCL or Technology Readiness Level (TRL) gated process, would be an advantage. What we offer: We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home, or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. For fully remote roles, employees can live in any state except Idaho, Nebraska, Nevada, Vermont, and Wyoming. Relocation is available for this position Job Expires: 12/8/25 Job CategoryManufacturing Engineering Job Posting Date11 Dec 2025; 00:12 Pay Range$90,985 - $136,477-Annually Location: Indianapolis, IN Benefits Rolls-Royce provides a comprehensive and competitive Total Rewards package that includes base pay and a discretionary bonus plan. Eligible employees may have the opportunity to enroll in other benefits, including health, dental, vision, disability, life and accidental death & dismemberment insurance; a flexible spending account; a health savings account; a 401(k) retirement savings plan with a company match; Employee Assistance Program; Paid Time Off; certain paid holidays; paid parental and family care leave; tuition reimbursement; and a long-term incentive plan. The options available to an employee may vary depending on eligibility factors such as date of hire, employment type, and the applicability of collective bargaining agreements.

Are you ready to be part of a company that's not just talking about the future, but actively shaping it? Join The AES Corporation (NYSE: AES), a Fortune 500 company that's leading the charge in the global energy revolution. With operations spanning 14 countries, AES is committed to shaping a future through innovation and collaboration. Our dedication to innovation has earned us recognition as one of the Top Ten Best Workplaces for Innovators by Fast Company in 2022. And with our certification as a Great Place to Work, you can be confident that you're joining a company that values its people just as much as its groundbreaking ideas. AES is proudly ranked #1 globally in renewable energy sales to corporations, and with $12.7B in revenues in 2023, we have the resources and expertise to make a significant impact as we provide electricity to 25 million customers worldwide. As the world moves towards a net-zero future, AES is committed to meeting the Paris Agreement's goals by 2050. Our innovative solutions, such as 24/7 carbon-free energy for data centers, are setting the pace for rapid, global decarbonization. If you're ready to be part of a company that's not just adapting to change, but driving it, AES is the place for you. We're not just building a cleaner, more sustainable future - we're powering it. Apply now and energize your career with a true leader in the global energy transformation. AES Ohio is seeking a Substation Design Engineer to join our dedicated team. This is a fully on-site role at our Dayton Service Building, where you'll play a key part in delivering reliable energy solutions and supporting critical projects. Key Responsibilities * Perform detailed design of all or parts of 12kV through 345kV substations consisting of physical layouts, one-line diagrams, protection and control schematics, and wiring diagrams. * Produce detailed engineering design packages in accordance with AES Ohio and relevant industry standards (IEEE, NERC, etc.). * Prepare procurement specifications for material and services, evaluate proposals, and work with Purchasing to obtain purchase orders. * Provide engineering support to field crews on construction and maintenance activities. * Assist in the planning, design, and construction management of substation projects. * Maintain and optimize internal design standards and engineering databases. * Assist in after-hours storm restoration and long duration customer outages as required. Qualifications * Bachelor of Science in Mechanical or Electrical Engineering from an ABET accredited program. Preferred Skills & Abilities * Experience with Bentley MicroStation or similar CAD software. * Passing grade on the Fundamentals of Engineering Exam * Familiarity with and application of electrical substation equipment (transformers, circuit breakers, instrument transformers, disconnect switches, relays, etc.) * Ability to work safely and integrate safety into engineering designs. Experience with Microsoft Office Suite (Outlook, Excel, Access, etc.) AES is an Equal Opportunity Employer who is committed to building strength and delivering long-term sustainability through diversity and inclusion. Respecting all backgrounds, differences and perspectives enables us to improve the lives of our people, customers, suppliers, contractors, and the communities in which we live and work. All qualified applicants will receive consideration for employment without regard to sex, sexual orientation, gender, gender identity and/or expression, race, national origin, ethnicity, age, religion, marital status, physical or mental disability, pregnancy, childbirth, or related medical condition, military or veteran status, or any other characteristic protected under applicable law. E-Verify Notice: AES will provide the Social Security Administration (SSA) and if necessary, the Department of Homeland Security (DHS) with information from each new employee's I-9 to confirm work authorization.

If you have what it takes to become part of the Vistra family and would like to start a promising career with a global leader, take a look at the exciting employment opportunities that are currently available and apply online. This position works with occasional supervision or direction to perform assigned tasks and coordinate assigned initiatives through completion. The position will maintain effective working relationships with others. As an Electrical/Instrumentation & Control (I&C) Systems Engineer at the Perry Nuclear Power Plant in Perry, Ohio your responsibilities will include leading in the development of solutions to system issues in support of plant operations and maintenance during both outage and non-outage periods. Job Description Key Accountabilities: Maintain plant configuration control by advocating for the site's Design Bases Provide technical expertise for electrical plant equipment issues on problem solving and troubleshooting teams. Prepare plant improvement design modifications that have been approved by the Plant Health Committee, calculations, specifications, technical reports and presentations. Modifications include both those that can be installed online along with outage modifications that require a refueling outage for implementation. Perform equivalency modifications for obsolete equipment with Procurement Engineering for Form, Fit, and Function determination Act as the primary technical contact for vendor personnel performing outsourced engineering work Coordinate owner's acceptance reviews of products developed by external consulting service companies contracted by Perry for capital projects. Developing and completing investigations and corrective actions in accordance with the Corrective Action Program. Providing support for interface with regulatory and oversight agencies including Nuclear Regulatory Commission Inspections. Performing field walk-downs and interfacing with other groups to resolve emergent and routine plant issues and support appropriate constructability of modifications Performing audits, observations, surveys and assessments of plant activities such as maintenance and operations. Pursuing opportunities to improve site human performance. Reviewing and analyzing plant operating characteristics and both Nuclear Regulatory Commission (NRC) and Industry correspondence to identify operating experiences that may be pertinent to or will aid in the resolution of plant issues applicable to assigned systems. Reviewing schedules and work orders to ensure efficient work implementation and technical adequacy of legacy engineering change packages Championing ownership of design change improvements and cross-departmental interfaces. Demonstrating a solid commitment to all aspects of safety e.g. nuclear, industrial, personal, radiological, etc. Actively seeking formal and informal learning opportunities to better understand technical policies, practices, and procedures. Developing effective working relationships with employees within you own work group and establishing a professional network Performing Emergency Response Organization (ERO) and duty team duties as assigned. Develop changes to existing design drawings or the creation of new drawings. Education, Experience, and Skill Requirements: Bachelor's degree in Engineering required. Bachelor's degree in Electrical Engineering is preferred. Experience with electrical and/or I&C systems design at a nuclear facility is preferred. Prior professional-level engineering experience is preferred. Prior plant design engineering experience, including experience with electrical, mechanical and I&C components, is preferred. Being able to work independently in leadership and mentoring roles with little Supervisory involvement is preferred. Proficient with Microsoft Office applications, including Word, Excel and PowerPoint. Prior experience with Electrical Transient Analysis Program (ETAP) and Microstation Cad Software are preferred. Excellent interpersonal skills and strong analytical ability. Ability to develop effective working relationships with all employees at Energy Harbor Able to deliver quality and accurate work within established deadlines. Excellent written and oral communication skills, with ability to make formal technical presentations to various management levels. Ability to work extended hours, shift schedules and perform on-call duties when necessary. Key Metrics: Teamwork and collaboration skills across organizational boundaries. Able to communicate routine issues effectively through written and verbal communication. Maintain effective working relationships across organizational boundaries Understanding of power generation equipment and system interrelationships. Understanding of economic drivers to the business. Able to apply problem solving processes to address routine issues. ** Final pay grade will be determined based on applicant's experience and qualifications ** Job Family Engineering Services Company Vistra Nuclear Operations Company Locations Perry, OhioOhio We are a company of people committed to: Exceeding Customer Expectations, Great People, Teamwork, Competitive Spirit and Effective Communication. If this describes you, then apply today! If you currently work for Vistra or its subsidiaries, please apply via the internal career site. It is the policy of the Company to comply with all employment laws and to afford equal employment opportunity to individuals in all aspects of employment, including in selection for job opportunities, without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, national origin, age, disability, genetic information, military service, protected veteran status, or any other consideration protected by federal, state or local laws. If you are an individual with a disability and need assistance submitting an application or would like to request an accommodation, please email us at assistance@vistraenergy.com to make a request.

EE&A is here to help provide emergency power generation products and services to customers in Ohio. Whether you need home standby generators, primary power for industrial use or generator sales and service, we build, integrate and warrant entire power generation packages: generator sets, controls, transfer switches, paralleling switchgear, fuel tanks, enclosures and controlling software. EE&A offers power generation systems and generator repairs using the necessary supporting equipment to residential, commercial and industrial based clients. We stock direct replacement parts for all of the equipment we service and can ship them direct from our warehouse or one of our suppliers for even faster support. Job Description As a Senior Mechanical Engineer, you will be responsible for the overall design, quality control and discipline leadership throughout the project lifecycle. We are looking for a leader with a passion for high performance/mission critical mechanical systems design. These key staff member's duties will include mentoring team members, leadership of the mechanical project scope, and working in a technologically advanced office environment on challenging projects with great team members. Responsibilities: Produce proposals and negotiate fees. Project manage MEP Teams. Attend kick-off meetings with local architects Perform site visits in local area Coordinate questions/needs list with client Coordinate project schedules/deliverables Review workload and current staff Interview and hire engineers Employee reviews Review revenues/expenses/profits. Qualifications BS in Mechanical Engineering from ABET accredited school Minimum 4 years' MEP design experience (PE and LEED AP a plus) Experience in AutoCAD and Revit Excellent verbal and written communication skills Excellent organizational skills with the ability to handle multiple projects within a fast-paced environment Self-motivated attitude Strong desire to excel in this industry Additional Information All your information will be kept confidential according to EEO guidelines.

If you have what it takes to become part of the Vistra family and would like to start a promising career with a global leader, take a look at the exciting employment opportunities that are currently available and apply online. This position works with occasional supervision or direction to perform assigned tasks and coordinate assigned initiatives through completion. The position will maintain effective working relationships with others Job Description Key Accountabilities: Performs assigned task with guidance from supervision Assemble and collate issue specific information to support studies Assist in organization and occasionally lead assigned projects Comply with safety policy and procedures to ensure a safe working environment Prepare and present routine reports Participate in special projects, committee assignments and routine problem - solving efforts as requested Sizing of motors, overcurrent electrical devices, relaying, and other electrical devices. Perform design changes for electrical components and systems. Ensuring compliance with all IEEE, NEIL, NRC, and NFPA code requirements are met for all Responsible for maintaining medium and low voltage systems including maintenance and trending of component level equipment. Education, Experience, and Skill Requirements: Bachelor's degree in Engineering (Electrical, Electrical Technology, or related field) from an accredited program. Minimum 2 yrs. related job experience required Relevant industry experience (4 yrs or more is preferred) ** Final pay grade will be determined based on applicant's experience and skills ** Key Metrics: Teamwork and collaboration skills within the team/department Effective written and verbal communication skills. Maintain effective working relationships within the team/department Basic understanding of power generation operations. Basic understanding of economic drivers to the business. Apply basic problem solving techniques to address routine issues Job Family Engineering Services Company Vistra Nuclear Operations Company Locations Oak Harbor, OhioOhio We are a company of people committed to: Exceeding Customer Expectations, Great People, Teamwork, Competitive Spirit and Effective Communication. If this describes you, then apply today! If you currently work for Vistra or its subsidiaries, please apply via the internal career site. It is the policy of the Company to comply with all employment laws and to afford equal employment opportunity to individuals in all aspects of employment, including in selection for job opportunities, without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, national origin, age, disability, genetic information, military service, protected veteran status, or any other consideration protected by federal, state or local laws. If you are an individual with a disability and need assistance submitting an application or would like to request an accommodation, please email us at assistance@vistraenergy.com to make a request.