Maintenance Technician jobs at First Service

The Installation Assistant will support the Installation Specialist in the installation and anchoring of modular buildings and mobile trailers at customer locations. When not assisting the Installation Specialist, the Installation Assistant will perform duties as a Yard Technician, ensuring the units are maintained according to company standards. Essential Duties and Responsibilities:Installation Tasks: Assist in the installation and anchoring of modular buildings and mobile trailers at customer locations. Assist in the retrieval of modular buildings and mobile trailers from customer locations to the yard. Assist in installation of skirting, steps, and VAPs at customer locations. Assist in safety protocols for CDL drivers. Assist in ensuring trucks are properly loaded. Operate hand and power tools safely. Serve as a spotter for CDL driver on job sites. Interface with customers at job sites. Yard Technician Tasks: Clean all units, including washing and waxing flooring. Replace and install floor tile. Replace and install windows and doors. Replace and install exterior siding and other building components. Paint all portions of units to specifications. Remove and replace walls. Remove and replace lighting, plumbing and electrical. Perform light carpentry work/repair on customer job site. Operate company toter as needed to maneuver trailers in yard. Required Skills and Qualifications: Light carpentry and electrical experience. Basic mechanical skills to work on trucks. Good organizational skills. Demonstrated knowledge and skills. Ability to operate company service vehicles. Ability to pass DOT medical exam. Physical/Mental Demands: Ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion, and grip strength. Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Wears personnel protective equipment as required. Work Environment and Safety: Employee will work in a variety of environments including garage, work yard, in-town driving, highway/freeway driving, construction site locations, etc. Must be able to perform tasks in all conditions including wet, humid, and dry. Will be working in outside weather conditions and will have exposure to common maintenance hazards. Must maintain a professional, responsible, and accountable attitude and perform tasks in a timely manner. Required ability to maintain a safe and healthy working environment taking responsibility for any necessary precautions to protect themselves, the company, other employees, and the vendors to avoid any injury and health hazard. Must immediately report all incidents to supervisors. Safety Sensitive Position: This position is classified as a safety sensitive position and, as such, is subject to random drug screenings per the Policy Substance Abuse and Drug Free Workplace. PM25

The Installation Assistant will support the Installation Specialist in the installation and anchoring of modular buildings and mobile trailers at customer locations. When not assisting the Installation Specialist, the Installation Assistant will perform duties as a Yard Technician, ensuring the units are maintained according to company standards. Essential Duties and Responsibilities:Installation Tasks: Assist in the installation and anchoring of modular buildings and mobile trailers at customer locations. Assist in the retrieval of modular buildings and mobile trailers from customer locations to the yard. Assist in installation of skirting, steps, and VAPs at customer locations. Assist in safety protocols for CDL drivers. Assist in ensuring trucks are properly loaded. Operate hand and power tools safely. Serve as a spotter for CDL driver on job sites. Interface with customers at job sites. Yard Technician Tasks: Clean all units, including washing and waxing flooring. Replace and install floor tile. Replace and install windows and doors. Replace and install exterior siding and other building components. Paint all portions of units to specifications. Remove and replace walls. Remove and replace lighting, plumbing and electrical. Perform light carpentry work/repair on customer job site. Operate company toter as needed to maneuver trailers in yard. Required Skills and Qualifications: Light carpentry and electrical experience. Basic mechanical skills to work on trucks. Good organizational skills. Demonstrated knowledge and skills. Ability to operate company service vehicles. Ability to pass DOT medical exam. Physical/Mental Demands: Ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion, and grip strength. Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Wears personnel protective equipment as required. Work Environment and Safety: Employee will work in a variety of environments including garage, work yard, in-town driving, highway/freeway driving, construction site locations, etc. Must be able to perform tasks in all conditions including wet, humid, and dry. Will be working in outside weather conditions and will have exposure to common maintenance hazards. Must maintain a professional, responsible, and accountable attitude and perform tasks in a timely manner. Required ability to maintain a safe and healthy working environment taking responsibility for any necessary precautions to protect themselves, the company, other employees, and the vendors to avoid any injury and health hazard. Must immediately report all incidents to supervisors. Safety Sensitive Position: This position is classified as a safety sensitive position and, as such, is subject to random drug screenings per the Policy Substance Abuse and Drug Free Workplace. PM25

The Installation Assistant will support the Installation Specialist in the installation and anchoring of modular buildings and mobile trailers at customer locations. When not assisting the Installation Specialist, the Installation Assistant will perform duties as a Yard Technician, ensuring the units are maintained according to company standards. Essential Duties and Responsibilities:Installation Tasks: Assist in the installation and anchoring of modular buildings and mobile trailers at customer locations. Assist in the retrieval of modular buildings and mobile trailers from customer locations to the yard. Assist in installation of skirting, steps, and VAPs at customer locations. Assist in safety protocols for CDL drivers. Assist in ensuring trucks are properly loaded. Operate hand and power tools safely. Serve as a spotter for CDL driver on job sites. Interface with customers at job sites. Yard Technician Tasks: Clean all units, including washing and waxing flooring. Replace and install floor tile. Replace and install windows and doors. Replace and install exterior siding and other building components. Paint all portions of units to specifications. Remove and replace walls. Remove and replace lighting, plumbing and electrical. Perform light carpentry work/repair on customer job site. Operate company toter as needed to maneuver trailers in yard. Required Skills and Qualifications: Light carpentry and electrical experience. Basic mechanical skills to work on trucks. Good organizational skills. Demonstrated knowledge and skills. Ability to operate company service vehicles. Ability to pass DOT medical exam. Physical/Mental Demands: Ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion, and grip strength. Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Wears personnel protective equipment as required. Work Environment and Safety: Employee will work in a variety of environments including garage, work yard, in-town driving, highway/freeway driving, construction site locations, etc. Must be able to perform tasks in all conditions including wet, humid, and dry. Will be working in outside weather conditions and will have exposure to common maintenance hazards. Must maintain a professional, responsible, and accountable attitude and perform tasks in a timely manner. Required ability to maintain a safe and healthy working environment taking responsibility for any necessary precautions to protect themselves, the company, other employees, and the vendors to avoid any injury and health hazard. Must immediately report all incidents to supervisors. Safety Sensitive Position: This position is classified as a safety sensitive position and, as such, is subject to random drug screenings per the Policy Substance Abuse and Drug Free Workplace. PM25

The Installation Assistant will support the Installation Specialist in the installation and anchoring of modular buildings and mobile trailers at customer locations. When not assisting the Installation Specialist, the Installation Assistant will perform duties as a Yard Technician, ensuring the units are maintained according to company standards. Essential Duties and Responsibilities:Installation Tasks: Assist in the installation and anchoring of modular buildings and mobile trailers at customer locations. Assist in the retrieval of modular buildings and mobile trailers from customer locations to the yard. Assist in installation of skirting, steps, and VAPs at customer locations. Assist in safety protocols for CDL drivers. Assist in ensuring trucks are properly loaded. Operate hand and power tools safely. Serve as a spotter for CDL driver on job sites. Interface with customers at job sites. Yard Technician Tasks: Clean all units, including washing and waxing flooring. Replace and install floor tile. Replace and install windows and doors. Replace and install exterior siding and other building components. Paint all portions of units to specifications. Remove and replace walls. Remove and replace lighting, plumbing and electrical. Perform light carpentry work/repair on customer job site. Operate company toter as needed to maneuver trailers in yard. Required Skills and Qualifications: Light carpentry and electrical experience. Basic mechanical skills to work on trucks. Good organizational skills. Demonstrated knowledge and skills. Ability to operate company service vehicles. Ability to pass DOT medical exam. Physical/Mental Demands: Ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion, and grip strength. Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Wears personnel protective equipment as required. Work Environment and Safety: Employee will work in a variety of environments including garage, work yard, in-town driving, highway/freeway driving, construction site locations, etc. Must be able to perform tasks in all conditions including wet, humid, and dry. Will be working in outside weather conditions and will have exposure to common maintenance hazards. Must maintain a professional, responsible, and accountable attitude and perform tasks in a timely manner. Required ability to maintain a safe and healthy working environment taking responsibility for any necessary precautions to protect themselves, the company, other employees, and the vendors to avoid any injury and health hazard. Must immediately report all incidents to supervisors. Safety Sensitive Position: This position is classified as a safety sensitive position and, as such, is subject to random drug screenings per the Policy Substance Abuse and Drug Free Workplace. PM25

Who are we? Satellite Industries is the world's largest supplier of products to the portable sanitation industry, which includes portable restrooms, handwash units, consumables, deodorizers, vacuum trucks, vacuum technology, unit haulers, restroom, shower, and specialty trailers. Position Summary: The Production Technician 2: PVA works with materials to create a finished product for commercial or industrial use. Please note that this position has a typical schedule of Monday - Thursday, 7am to 6pm. Essential Duties and Responsibilities: Follow checklist for production start-up including: preparing machine for production, ensuring line is ready for production, turning on production equipment including but not limited to: compressor, vacuum, Mattpak, etc. Input work orders into appropriate printers to ensure accurate product marking. Affix product label rolls onto labeling machine. Initiate and monitor the operation of the automated bagging machine. Generate pallet tickets and record pallet information clearly and accurately. Conduct routine quality inspections to ensure product meets Satellite standards and identify and report any quality defects promptly. Count materials and report inventory discrepancies. Understanding work orders and bill of materials and ability to review and sign off on materials as required. Count and stack boxed product(s) in a neat and thorough manner. Move, stack, wrap, and replace pallets on robot. Bag packets into bags utilizing appropriate equipment/machinery. Perform accurate hand-counting of packets. Complete housekeeping duties regularly, following standard operating procedures and operational needs including but not limited to: sweeping, squeegeeing floors, cleaning process equipment, etc. Report waste and scrap materials in an accurate and timely manner. Verify that all materials match the specifications outlined in work orders. Labeling containers to meet customer specifications and federal regulations. Supervisory Responsibilities: No formal supervisory role. Education and Experience Requirements: This position prefers a high school diploma/GED. 3+ years of chemical production experience or the equivalent of training and experience. 3+ years manufacturing equipment operation experience. Required Skills: Proficient understanding of running manufacturing equipment. Intermediate manufacturing experience required. Ability to read, comprehend, and follow written instructions, chemical labels, safety regulations, and company policies, etc. Ability to maintain composure and effectiveness in a high-pressure and fast-paced environment. Technical Capacity. Ethical Conduct. Strong attention to detail. Ability to multi-task and be self-directed while remaining a team player. Excellent communication and teamwork skills. Independent Decision-Making skills. Physical/Mental Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk, read, count, and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, pushing, pulling, climbing ladders, and lifting throughout the day. The employee must frequently lift and/or move items over 30 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The employee must be able to use the personal protective equipment (PPE) that is determined to be necessary for this position including, but not limited to: respirators with a minimum requirement of N-95, safety-grade gloves, safety-grade eye protection, steel or composite toe shoes, etc. WORK ENVIRONMENT: While performing the duties of this job, the employee will be required to regularly work in a manufacturing environment working with multiple agents and reactants including, but not limited to: fumes, chemicals, airborne particles, moving mechanical parts etc. The noise level is typically moderate but hearing protection may be required. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Safety Sensitive Position: This position is classified as a safety sensitive position and, as such, is subject to random drug screenings per the Policy Substance Abuse and Drug Free Workplace. PM25

Who are we? Satellite Industries is the world's largest supplier of products to the portable sanitation industry, which includes portable restrooms, handwash units, consumables, deodorizers, vacuum trucks, vacuum technology, unit haulers, restroom, shower, and specialty trailers. Position Summary: The Production Technician 2: PVA works with materials to create a finished product for commercial or industrial use. Please note that this position has a typical schedule of Monday - Thursday, 7am to 6pm. Essential Duties and Responsibilities: Follow checklist for production start-up including: preparing machine for production, ensuring line is ready for production, turning on production equipment including but not limited to: compressor, vacuum, Mattpak, etc. Input work orders into appropriate printers to ensure accurate product marking. Affix product label rolls onto labeling machine. Initiate and monitor the operation of the automated bagging machine. Generate pallet tickets and record pallet information clearly and accurately. Conduct routine quality inspections to ensure product meets Satellite standards and identify and report any quality defects promptly. Count materials and report inventory discrepancies. Understanding work orders and bill of materials and ability to review and sign off on materials as required. Count and stack boxed product(s) in a neat and thorough manner. Move, stack, wrap, and replace pallets on robot. Bag packets into bags utilizing appropriate equipment/machinery. Perform accurate hand-counting of packets. Complete housekeeping duties regularly, following standard operating procedures and operational needs including but not limited to: sweeping, squeegeeing floors, cleaning process equipment, etc. Report waste and scrap materials in an accurate and timely manner. Verify that all materials match the specifications outlined in work orders. Labeling containers to meet customer specifications and federal regulations. Supervisory Responsibilities: No formal supervisory role. Education and Experience Requirements: This position prefers a high school diploma/GED. 3+ years of chemical production experience or the equivalent of training and experience. 3+ years manufacturing equipment operation experience. Required Skills: Proficient understanding of running manufacturing equipment. Intermediate manufacturing experience required. Ability to read, comprehend, and follow written instructions, chemical labels, safety regulations, and company policies, etc. Ability to maintain composure and effectiveness in a high-pressure and fast-paced environment. Technical Capacity. Ethical Conduct. Strong attention to detail. Ability to multi-task and be self-directed while remaining a team player. Excellent communication and teamwork skills. Independent Decision-Making skills. Physical/Mental Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk, read, count, and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, pushing, pulling, climbing ladders, and lifting throughout the day. The employee must frequently lift and/or move items over 30 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The employee must be able to use the personal protective equipment (PPE) that is determined to be necessary for this position including, but not limited to: respirators with a minimum requirement of N-95, safety-grade gloves, safety-grade eye protection, steel or composite toe shoes, etc. WORK ENVIRONMENT: While performing the duties of this job, the employee will be required to regularly work in a manufacturing environment working with multiple agents and reactants including, but not limited to: fumes, chemicals, airborne particles, moving mechanical parts etc. The noise level is typically moderate but hearing protection may be required. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Safety Sensitive Position: This position is classified as a safety sensitive position and, as such, is subject to random drug screenings per the Policy Substance Abuse and Drug Free Workplace. PM25

Truck Chassis Assembler Install chassis mounted tank and pumping equipment for use in the liquid waste industry. Most common uses for the trucks are portable toilet service, septic service, waste oil collection. Most common installations include the mounting of a vacuum tank to the truck chassis with various types of mounting brackets. The vacuum pumping systems are generally power take off driven or hydraulic driven and are bolted to the truck frame. Water delivery systems are generally 12V electric driven, along with work lights, back up cameras, and other various safety systems. All legal lighting and bumpers must also be installed. General Skills Needed: General knowledge of 12 volt electrical systems and wiring installation Ability to read wiring diagrams and blue prints Ability to use measuring devices like a tape measure, levels and micrometer Ability to use power tools like, drills, saws, air tools, etc. Light welding, cutting & metal fabrication General mechanical knowledge Ability to safely operate lifting equipment like hoists and lift trucks Ability to read installation manuals for a variety of truck equipment and install them as per instructions PTO installation skills are a plus Hydraulic experience is a plus A Good work ethic and an eagerness to learn are a must. Work Environment: This job operates in a manufacturing operation setting. The role is exposed to high heat in the summer and low temperatures in the winter for limited amounts of time. Physical/Mental Demands: This job could require standing, squatting, climbing and working on ladder or step stool. The weight is up to 50 lbs lifting working in heat/cold. Position Type: This is a full-time position. Expected Hours of Work: The typical days and hours of work are Monday through Thursday 6:00 am - 4:00pm Overtime is required as needed for production. PM25

Title: Equipment Technician Exempt: Non-Exempt About the Organization RoadSafe Traffic Systems is the largest national provider of traffic safety products and services in the United States. RoadSafe serves customers in all 48 contiguous states through its network of more than 60+ branch locations. At RoadSafe, we offer competitive pay, growth potential, and an excellent benefits package, including medical, dental, vision, and 401(k) plans for those who qualify. We recognize and value diversity and are committed to creating an inclusive environment for all employees. Position Summary: The Equipment Technician is responsible for assembling, testing, maintaining, and repairing company equipment. This role involves reading and understanding equipment operations and maintenance manuals, conducting inspections, and identifying equipment malfunctions or areas for repair and replacement. Additionally, the technician assists with on-the-job training for employees and recommends improvements to enhance equipment reliability and performance. The role includes managing inventory control of tools, parts, and supplies, while developing cost-saving initiatives. Key Responsibilities: Assemble, test, and maintain equipment. Perform regular inspections to identify malfunctions and handle repairs or replacements. Assist with employee training and supervision of shop helpers. Maintain and track inventory of parts, tools, and shop supplies. Monitor and report on equipment repair statuses. Maintain cleanliness and organization of the work area. Collaborate with vendors to improve cost efficiency and ensure proper servicing. Ensure equipment repairs and servicing are conducted per company safety policies. Complete work orders and accurately document repairs, including parts, labor, and costs. Manage fleet service programs, ensuring vehicles are serviced on time in collaboration with vendors. Record maintenance and repair procedures for future reference. Essential Functions: Oversee and train shop support staff. Maintain inventory levels of parts and tools. Ensure all equipment is repaired or serviced as needed. Collaborate with vendors on equipment cost improvement. Complete equipment check sheets and work orders efficiently. Provide reports on work performed and suggest performance improvements. Adhere to company safety policies and procedures at all times. Maintain accurate records of work orders and parts used. Perform mechanical repairs, maintenance, and inspections as assigned. Required Knowledge, Skills, and Abilities: Electronics, hydraulic, and welding experience. Ability to operate a skid-steer (forklift). Basic knowledge of DOT requirements related to fleet operations. Ability to disassemble, calibrate, and maintain equipment. Familiarity with hydraulic and electrical systems. Strong English communication skills and problem-solving abilities. Physical Requirements: Ability to climb, kneel, and work with arms lifted for extended periods. Ability to lift, push, and pull up to 50 lbs regularly. Ability to walk and stand on concrete or uneven surfaces for at least 4 hours. Comfortable working around machines with moving parts, petroleum, or chemical products. Ability to work in extreme temperatures (hot or cold). Additional Requirements: Strong work ethic and attention to detail. Must provide basic hand tools. Valid driver's license with a clean driving record. Ability to work extended or standby hours on an "on-call" basis. Willingness to travel and stay overnight when required by project needs. Must pass a drug test and DOT physical exam. Proficient in basic computer skills. Hands-on experience in welding, metal fabrication, and equipment calibration. Meticulous attention to detail and strong decision-making skills. Strong communication abilities, with a command of the English language. EOE Statement RoadSafe is an Equal Opportunity Employer/including Disabled/Veterans Pay Range: $18 - $20 per hour

Truck Chassis Assembler Install chassis mounted tank and pumping equipment for use in the liquid waste industry. Most common uses for the trucks are portable toilet service, septic service, waste oil collection. Most common installations include the mounting of a vacuum tank to the truck chassis with various types of mounting brackets. The vacuum pumping systems are generally power take off driven or hydraulic driven and are bolted to the truck frame. Water delivery systems are generally 12V electric driven, along with work lights, back up cameras, and other various safety systems. All legal lighting and bumpers must also be installed. General Skills Needed: General knowledge of 12 volt electrical systems and wiring installation Ability to read wiring diagrams and blue prints Ability to use measuring devices like a tape measure, levels and micrometer Ability to use power tools like, drills, saws, air tools, etc. Light welding, cutting & metal fabrication General mechanical knowledge Ability to safely operate lifting equipment like hoists and lift trucks Ability to read installation manuals for a variety of truck equipment and install them as per instructions PTO installation skills are a plus Hydraulic experience is a plus A Good work ethic and an eagerness to learn are a must. Work Environment: This job operates in a manufacturing operation setting. The role is exposed to high heat in the summer and low temperatures in the winter for limited amounts of time. Physical/Mental Demands: This job could require standing, squatting, climbing and working on ladder or step stool. The weight is up to 50 lbs lifting working in heat/cold. Position Type: This is a full-time position. Expected Hours of Work: The typical days and hours of work are Monday through Thursday 6:00 am - 4:00pm Overtime is required as needed for production. PM25

Truck Chassis Assembler Install chassis mounted tank and pumping equipment for use in the liquid waste industry. Most common uses for the trucks are portable toilet service, septic service, waste oil collection. Most common installations include the mounting of a vacuum tank to the truck chassis with various types of mounting brackets. The vacuum pumping systems are generally power take off driven or hydraulic driven and are bolted to the truck frame. Water delivery systems are generally 12V electric driven, along with work lights, back up cameras, and other various safety systems. All legal lighting and bumpers must also be installed. General Skills Needed: General knowledge of 12 volt electrical systems and wiring installation Ability to read wiring diagrams and blue prints Ability to use measuring devices like a tape measure, levels and micrometer Ability to use power tools like, drills, saws, air tools, etc. Light welding, cutting & metal fabrication General mechanical knowledge Ability to safely operate lifting equipment like hoists and lift trucks Ability to read installation manuals for a variety of truck equipment and install them as per instructions PTO installation skills are a plus Hydraulic experience is a plus A Good work ethic and an eagerness to learn are a must. Work Environment: This job operates in a manufacturing operation setting. The role is exposed to high heat in the summer and low temperatures in the winter for limited amounts of time. Physical/Mental Demands: This job could require standing, squatting, climbing and working on ladder or step stool. The weight is up to 50 lbs lifting working in heat/cold. Position Type: This is a full-time position. Expected Hours of Work: The typical days and hours of work are Monday through Thursday 6:00 am - 4:00pm Overtime is required as needed for production. PM25

We Don't Cheat at Solitaire! If you're looking for a company that values doing the right thing and putting people & safety first, this may be the company for you! Satellite Shelters, Inc., a leader in the mobile modular industry, has a great opportunity for a Yard Technician to join our team in our Orlando, FL, branch ( This branch is due to move to a new location in Apopka in early 2026) . The right person is a highly organized and safety-oriented individual who is a problem-solver and a HIGHLY effective communicator. Experience in the construction or mobile office industries is preferred. Position Summary: This position is responsible for the construction and repair of units in compliance with Satellite Shelter's policies and procedures and according to specifications aligned by Operations Manager. Essential Duties and Responsibilities: Yard organization and cleanliness Mobile office material inventory management Organize, maintain, load & unload furniture (Satellite Specialty Products) Remove and replace lighting, plumbing and electrical Perform moderate carpentry work/repair. Interface with customers at job sites Perform other duties as assigned. Supervisory Responsibilities: No formal supervisory role. Required Skills: Must be a Self-Starter; has the ability to work independently & take initiative Problem-solver Forklift experience Utility trailer experience Entry level to intermediate level construction experience required Moderate carpentry and electrical experience. Organized HVAC experience preferred but not required. Physical/Mental Demands: Wears personal protective equipment as required Demonstrated ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion and grip strength Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to operate hand and power tools Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Compensation: The pay range listed is the base pay range that Satellite Shelters, inc/Satellite Industries, Inc. reasonably expects to pay someone for this position (compensation may vary outside of this range depending on several factors, including but not limited to, a candidate's qualifications, skills, competencies, experience, location and end client requirements). Benefits and Ancillaries: Medical, dental, vision, PTO benefits and ancillaries may be available for eligible employees and vary based on the plan options selected by the employee. PM25

We Don't Cheat at Solitaire! If you're looking for a company that values doing the right thing and putting people & safety first, this may be the company for you! Satellite Shelters, Inc., a leader in the mobile modular industry, has a great opportunity for a Yard Technician to join our team in our Orlando, FL, branch ( This branch is due to move to a new location in Apopka in early 2026) . The right person is a highly organized and safety-oriented individual who is a problem-solver and a HIGHLY effective communicator. Experience in the construction or mobile office industries is preferred. Position Summary: This position is responsible for the construction and repair of units in compliance with Satellite Shelter's policies and procedures and according to specifications aligned by Operations Manager. Essential Duties and Responsibilities: Yard organization and cleanliness Mobile office material inventory management Organize, maintain, load & unload furniture (Satellite Specialty Products) Remove and replace lighting, plumbing and electrical Perform moderate carpentry work/repair. Interface with customers at job sites Perform other duties as assigned. Supervisory Responsibilities: No formal supervisory role. Required Skills: Must be a Self-Starter; has the ability to work independently & take initiative Problem-solver Forklift experience Utility trailer experience Entry level to intermediate level construction experience required Moderate carpentry and electrical experience. Organized HVAC experience preferred but not required. Physical/Mental Demands: Wears personal protective equipment as required Demonstrated ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion and grip strength Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to operate hand and power tools Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Compensation: The pay range listed is the base pay range that Satellite Shelters, inc/Satellite Industries, Inc. reasonably expects to pay someone for this position (compensation may vary outside of this range depending on several factors, including but not limited to, a candidate's qualifications, skills, competencies, experience, location and end client requirements). Benefits and Ancillaries: Medical, dental, vision, PTO benefits and ancillaries may be available for eligible employees and vary based on the plan options selected by the employee. PM25

Title: Pavement Marking Technician II Classification: Non-Exempt About the Organization RoadSafe Traffic Systems is the largest national provider of traffic safety products and services in the United States. RoadSafe serves customers in all 48 contiguous states through its network of more than 60+ branch locations. At RoadSafe, we offer competitive pay, growth potential, and an excellent benefits package, including medical, dental, vision, and 401(k) plans for those who qualify. We recognize and value diversity and are committed to creating an inclusive environment for all employees. POSITION SUMMARY: The Pavement Marking Technician is responsible for driving and operating pavement marking equipment for road construction and maintenance projects. This role ensures the precise application of road markings, adherence to safety protocols, and proper maintenance of equipment. The ideal candidate will be able to work in various weather conditions, follow detailed instructions, and collaborate effectively with team members and contractors to ensure project success. ESSENTIAL FUNCTIONS: Operate equipment to place paint, thermoplastic, and other pavement markings. Prepare work areas, transport materials, and operate company trucks for job site logistics. Implement striping plans and perform layout, including intersection markings. Lift, carry, load, and unload construction items, including pavement marking supplies and signs. Use hand grinders to remove old lines and pavement markings; install, remove, and reset delineators, signs, posts, and supports. Cut, lay out, and install heat tape; apply and remove temporary and permanent reflective tape. Install Cold Applied Plastic and Preformed Thermoplastic to job specifications. Maintain and operate all hand and pavement marking equipment, including milling, and grinding equipment. Perform shop work, including equipment maintenance and repair, ensuring operational efficiency. Communicate with contractors, field inspectors, and supervise field personnel. Complete daily required paperwork, including logging yield conversions and verifying specifications. Follow all safety rules and regulations to ensure a safe work environment. Adhere to all Company Policies and Procedures. Perform other work-related duties as assigned. EDUCATION, EXPERIENCE AND SKILLS REQUIRED: Valid Commercial Driver's License (CDL) required; Must obtain CDL Class B within 60 days of employment. Must be able to pass a background check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Must successfully complete the ATSSA TCT intermediate training course. Must successfully complete the ATSSA Pavement Marking intermediate training course (if mandated by the state). Must be able to read plans, ensure traffic control plans are implemented and maintained, comply with road signs, complete paperwork, and understand federal and state motor carrier safety regulations. Knowledge of state and local roadways and experience operating delivery vehicles of varying sizes. Ability to lift and move up to 70 pounds. Knowledge of safety procedures for securing and transporting cargo. EOE Statement RoadSafe is an Equal Opportunity Employer/including Disabled/Veterans Pay Range: $23 per hour

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy. A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments. Hourly Rate: $33.30, $2 night shift differential Shift: Night shift, 5:45pm-6:00am rotating schedule At the Johns Manville Scottsboro, AL facility, we manufacture reinforced TPO roof membrane and accessories. We take pride in our innovative process and our commitment to excellence. Here, our PEOPLE are at the core of everything we do, our PASSION drives us to go the extra mile, we PERFORM at a superior level, and we PROTECT today to ensure tomorrow. Position Overview: As a Multi-Craft Electrical/Maintenance Technician, you'll play a crucial role in maintaining and enhancing our production and facility equipment, ensuring we continue to deliver top-quality TPO roofing materials. This role is integral to achieving our safety, productivity, and uptime goals while embodying our core values and delivering the JM experience. Your Day-to-Day: Follow Job Safety Analysis (JSA's), employ safe work practices, and report hazardous conditions. Perform both routine and complex maintenance activities on mechanical and electrical systems. Install and repair electrical conduit and cable, ensuring proper connections and grounding. Utilize schematics for troubleshooting or installing equipment. Conduct electrical measurements and use common shop tools for various maintenance tasks. Inspect equipment, report defects, and perform preventative maintenance. Troubleshoot and repair production and facility equipment to maintain optimal operations. Track and manage work orders using SAP maintenance modules. What You Bring to the Team: High school diploma or equivalent 2-5 years of electrical/maintenance experience in a manufacturing or similar environment Strong skills in troubleshooting, wiring, and installing industrial electrical equipment Proven mechanical troubleshooting, installation, and repair abilities Preferred Requirements: Associate degree in a related technical area Expertise in PLCs, HMIs, and associated hardware Knowledge of 24V - 480V AC/DC electrical power and control systems, VFDs, and PLC systems Physical Requirements: Ability to work in typical manufacturing conditions with exposure to varying environmental factors. Capacity to work 12-hour shifts and lift up to 50 pounds as needed. Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team. Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees. Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs. Diversity & Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Exempt Oldcastle Infrastructure™, a CRH company, is the leading provider of utility infrastructure solutions for the water, energy, and communications markets throughout North America. We're more than just a manufacturer of precast concrete, polymer concrete, or plastic products. We're a trusted and strategic partner to engineers, contractors, distributors, specifiers, and more. With our network of more than 80 manufacturing facilities and more than 4,000 employees, we're leading the industry with innovation and a safety-first mindset. Job Summary The Maintenance Supervisor is responsible for leading a maintenance team to work injury-free/incident free in a manufacturing environment. They will provide leadership and direction for their team in a way that motivates them to meet goals related to repairing plant equipment, minimizing downtime, and meeting safety goals. They are driven to continually improve performance and embrace changes that will help their team and company meet these goals, while working in conjunction with the production and management teams. Job Location This position will be based onsite at our facility in Auburn, WA. Job Responsibilities Maintains safe working conditions and ensures a safety mindset, especially as it relates to working on equipment and using tools and machinery Drives safety excellence through promoting employee involvement, ownership, and accountability to proactively eliminate hazards Hires, schedules, and supervises full time staff and additional temporary staff as required Provides coaching and corrective feedback timely as well as administers disciplinary processes up to and including termination, as necessary Performs timely quarterly and annual reviews for all team members Facilitate team development and growth, employee skill development, problem-solving and resolution Oversees all process documentation and training program procedures for consistency of operational tasks, and the safety and cleanliness of the workplace Construct fixtures as required Creates a schedule and performs preventative maintenance and regular inspections on equipment Repairs facility equipment, fixtures, building, and grounds Directs maintenance team members in troubleshooting, repair and maintenance of equipment Orders tools, equipment, supplies and services necessary for repairs and maintenance Removes and/or installs fixtures and equipment for safe, efficient operation Troubleshoots electric, hydraulic, pneumatic, and mechanical systems to determine causes of failures and recommends solutions for repair Maintain cleanliness, functionality, and efficiency of maintenance equipment, tools, and fixtures Other duties may be assigned as needed Job Requirements Strong analytical, problem-solving, and critical thinking skills Ability to coach, develop and build a strong team of employees Strong listening and clear communication skills both written and verbal Ability to manage multiple priorities simultaneously Demonstrated ability to work in a results-oriented environment Forklift and Crane Certification or ability to obtain is required Welding skills preferred Strong working knowledge of electrical and hydraulic systems Ability to review and understand machine blueprints Ability to use hand tools and basic machine shop equipment 1+ years of supervisory experience in a manufacturing environment preferred High school diploma or equivalent required, college degree preferred Must have experience in the maintenance field, at least 2+ years is preferred Must have previous supervisory or leadership experience Proficient in Microsoft Office including Word and Excel Ability to perform basic mathematical skills such as calculating percentages and volumes and using fractions Physical Demands Lifting may be required with assistance provided if needed Compensation Target base salary range is $80,000.00 to $95,000.00 Yearly bonus target of 5% Vacation hours of two weeks per year Sick leave benefits up to 56 hours per annum 401k plan Short-Term and Long-Term Disability benefits Eleven paid holidays per year Annual Community Volunteer paid day What CRH Offers You Highly competitive base pay Comprehensive medical, dental and disability benefits programs Group retirement savings program Health and wellness programs An inclusive culture that values opportunity for growth, development, and internal promotion About CRH CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization. If you're up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest! Oldcastle Infrastructure, a CRH Company, is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law.

Ash Grove family of companies is one of North America's leading cement manufacturers, with a legacy of innovation and excellence dating back to 1882. The company operates 12 world-class cement plants and a vast network of 41 terminals across the United States and Canada. Renowned for its forward-thinking approach, Ash Grove combines technical expertise, robust safety standards, and empowered talent to deliver high performance and better serve our customers. At Ash Grove, we stand together to reinvent the way our world is built. To learn more about us go to **************** At Ash Grove Cement, people are our first priority. We offer a complete benefits package to include: Health Insurance Dental Insurance Vision Insurance Retirement Plan Paid Time Off, Paid Holidays Tuition Reimbursement Employee Assistance Program Disability Pay Life Insurance Growth Opportunities and more! Summary: The Maintenance Supervisor schedules, coordinates, and supervises the maintenance crew, preventive/predictive maintenance, and mechanical repair activities. What you'll be contributing: Promote and follow all plant safety guidelines. Provides technical assistance in the safe use of tools and equipment, training new and current employees on proper procedures, techniques, and safety precautions. Schedules and coordinates daily preventive/predictive maintenance and mechanical repair activities and projects. Inspects job sites before beginning maintenance projects to identify hazards and ensure a safe work environment. Operates computerized preventive maintenance and repairs system to prepare work orders, document work activities, and maintain all records. Assesses and gives performance feedback to the maintenance crew. Maintains records of attendance and paid time off. Analyzes and writes job procedures for new jobs and modifies procedures for existing jobs Estimates time and parts required to complete projects and repairs. Collaborates with Purchasing Agent to ensure adequate supplies are ordered or in stock for projects. Assists in contacting vendors and obtaining contractors regarding maintenance needs Attends and regularly conducts safety meetings and inspections to ensure compliance with safety requirements. Coordinate and supervises the work of contractors for specified maintenance activities Assists in preparing the budget for capital expenditures planned for maintenance projects and repairs Participates in the monthly conference calls with Manufacturing Extension Partnership (MEP). Additional duties as assigned by supervisor. To succeed in this position, you will need: High School Diploma or GED is required 2 year/Associates Degree in a related area is preferred Minimum 3 years of supervisory or maintenance experience in engineering, or facility management in a similar position in related field. A combination of relevant experience may be accepted in lieu of a diploma/degree. Ability to read, write, and understand warning labels, instructions, signs, etc. Proficient in English written and verbal communication skills Knowledge of maintenance and repair required for plant equipment and structures Demonstrates project management skills Ability to uses independent judgment Ability to make decisions, plan, organize, and problem solve Ability to operate a personal computer Ability to read and understand equipment manuals, mechanical drawings and blueprints Aptitude for learning new computer software Knowledge of all equipment and machinery used in the plant and how each of them functions Knowledge of government regulations such as EPA regulations and MSHA as they apply to maintenance projects and repair activities Working knowledge of steel specifications, welding, conveyors, AC/DC motors, fans, hydraulic systems, fabrication, cutting torch basics, soldering, lubricants, carpentry, millwright work, mechanics, plumbing, electrical distribution systems, machine shop equipment and procedures, painting, torques wrenches, etc What's next for you? We provide stability and advancement opportunities across North America. Use our tuition reimbursement program to help you meet your career goals. The above duties and responsibilities are representative of the nature and level of work assigned and are not necessarily all-inclusive. The physical demands, working environment, and other conditions of employment listed in this document are representative of but are not intended to provide an exhaustive list of the requirements for positions in this classification. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. What CRH Offers You Highly competitive base pay Comprehensive medical, dental and disability benefits programs Group retirement savings program Health and wellness programs An inclusive culture that values opportunity for growth, development, and internal promotion About CRH CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization. If you're up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest! Ash Grove Cement, a CRH Company, is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law.

Exempt Oldcastle Infrastructure™, a CRH company, is the leading provider of utility infrastructure solutions for the water, energy, and communications markets throughout North America. We're more than just a manufacturer of precast concrete, polymer concrete, or plastic products. We're a trusted and strategic partner to engineers, contractors, distributors, specifiers, and more. With our network of more than 80 manufacturing facilities and more than 4,000 employees, we're leading the industry with innovation and a safety-first mindset. Job Summary The Maintenance Supervisor is responsible for leading a maintenance team to work injury-free/incident free in a manufacturing environment. They will provide leadership and direction for their team in a way that motivates them to meet goals related to repairing plant equipment, minimizing downtime, and meeting safety goals. They are driven to continually improve performance and embrace changes that will help their team and company meet these goals, while working in conjunction with the production and management teams. Job Location This role is based out of the plant in Acworth, GA. Job Responsibilities Maintains safe working conditions and ensures a safety mindset, especially as it relates to working on equipment and using tools and machinery Drives safety excellence through promoting employee involvement, ownership, and accountability to proactively eliminate hazards Hires, schedules, and supervises full time staff and additional temporary staff as required Provides coaching and corrective feedback timely as well as administers disciplinary processes up to and including termination, as necessary Performs timely quarterly and annual reviews for all team members Facilitate team development and growth, employee skill development, problem-solving and resolution Oversees all process documentation and training program procedures for consistency of operational tasks, and the safety and cleanliness of the workplace Construct fixtures as required Creates a schedule and performs preventative maintenance and regular inspections on equipment Repairs facility equipment, fixtures, building, and grounds Directs maintenance team members in troubleshooting, repair and maintenance of equipment Orders tools, equipment, supplies and services necessary for repairs and maintenance Removes and/or installs fixtures and equipment for safe, efficient operation Troubleshoots electric, hydraulic, pneumatic, and mechanical systems to determine causes of failures and recommends solutions for repair Maintain cleanliness, functionality, and efficiency of maintenance equipment, tools, and fixtures Other duties may be assigned as needed Job Requirements Strong analytical, problem-solving, and critical thinking skills Ability to coach, develop and build a strong team of employees Strong listening and clear communication skills both written and verbal Ability to manage multiple priorities simultaneously Demonstrated ability to work in a results-oriented environment Forklift and Crane Certification or ability to obtain is required Welding skills preferred Strong working knowledge of electrical and hydraulic systems Ability to review and understand machine blueprints Ability to use hand tools and basic machine shop equipment Minimum one year of supervisory experience in a manufacturing environment preferred High school diploma or equivalent required, college degree preferred Must have experience in the maintenance field, at least 2 years is preferred Must have previous supervisory or leadership experience Proficient in Microsoft Office including Word and Excel Ability to perform basic mathematical skills such as calculating percentages and volumes and using fractions What CRH Offers You Highly competitive base pay Comprehensive medical, dental and disability benefits programs Group retirement savings program Health and wellness programs An inclusive culture that values opportunity for growth, development, and internal promotion About CRH CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization. If you're up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest! Oldcastle Infrastructure, a CRH Company, is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law.

Exempt Oldcastle Infrastructure™, a CRH company, is the leading provider of utility infrastructure solutions for the water, energy, and communications markets throughout North America. We're more than just a manufacturer of precast concrete, polymer concrete, or plastic products. We're a trusted and strategic partner to engineers, contractors, distributors, specifiers, and more. With our network of more than 80 manufacturing facilities and more than 4,000 employees, we're leading the industry with innovation and a safety-first mindset. Job Summary The Maintenance Supervisor is responsible for overseeing the maintenance team and ensuring the optimal performance of plastic injection molding machines, auxiliary equipment, and facility infrastructure. This role involves planning, coordinating, and executing preventive and corrective maintenance activities to minimize downtime and support production efficiency. Job Location This is an onsite position located in Middlefield, OH. Job Responsibilities Maintains safe working conditions and drives a safety-first mindset, especially as it relates to working on equipment and using tools and machinery. Supervise and lead a team of maintenance technicians across multiple shifts. Schedule and oversee preventive maintenance for injection molding machines, robotics, chillers, dryers, and other related equipment. Troubleshoot and resolve mechanical, electrical, hydraulic, and pneumatic issues. Maintain accurate records of maintenance activities, equipment history, and spare parts inventory. Collaborate with production and engineering teams to support continuous improvement initiatives. Ensure compliance with safety regulations and company policies. Train and mentor maintenance staff to enhance technical skills and promote a culture of accountability. Manage maintenance budgets and recommend cost-effective solutions. Coordinate with vendors and contractors for specialized repairs or installations. Job Requirements High school diploma or GED required; technical degree or certification preferred. Minimum of 5 years of experience in industrial maintenance, with at least 2 years in a supervisory role. Strong knowledge of plastic injection molding processes and equipment. Strong working knowledge of electrical and hydraulic systems. Proficiency in reading mechanical and electrical schematics. Excellent leadership, communication, and organizational skills. Ability to work in a fast-paced, high-volume manufacturing environment. What CRH Offers You Highly competitive base pay Comprehensive medical, dental and disability benefits programs Group retirement savings program Health and wellness programs An inclusive culture that values opportunity for growth, development, and internal promotion About CRH CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization. If you're up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest! Oldcastle Infrastructure, a CRH Company, is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law.

Exempt Oldcastle Infrastructure™, a CRH company, is the leading provider of utility infrastructure solutions for the water, energy, and communications markets throughout North America. We're more than just a manufacturer of precast concrete, polymer concrete, or plastic products. We're a trusted and strategic partner to engineers, contractors, distributors, specifiers, and more. With our network of more than 80 manufacturing facilities and more than 4,000 employees, we're leading the industry with innovation and a safety-first mindset. Job Summary The Maintenance Supervisor is responsible for leading a maintenance team to work injury-free/incident free in a manufacturing environment. They will provide leadership and direction for their team in a way that motivates them to meet goals related to repairing plant equipment, minimizing downtime, and meeting safety goals. They are driven to continually improve performance and embrace changes that will help their team and company meet these goals, while working in conjunction with the production and management teams. Job Location This position is based in our facility in Raleigh, NC. Job Responsibilities Maintains safe working conditions and ensures a safety mindset, especially as it relates to working on equipment and using tools and machinery Drives safety excellence through promoting employee involvement, ownership, and accountability to proactively eliminate hazards Hires, schedules, and supervises full time staff and additional temporary staff as required Provides coaching and corrective feedback timely as well as administers disciplinary processes up to and including termination, as necessary Performs timely quarterly and annual reviews for all team members Facilitate team development and growth, employee skill development, problem-solving and resolution Oversees all process documentation and training program procedures for consistency of operational tasks, and the safety and cleanliness of the workplace Construct fixtures as required Creates a schedule and performs preventative maintenance and regular inspections on equipment Repairs facility equipment, fixtures, building, and grounds Directs maintenance team members in troubleshooting, repair and maintenance of equipment Orders tools, equipment, supplies and services necessary for repairs and maintenance Removes and/or installs fixtures and equipment for safe, efficient operation Troubleshoots electric, hydraulic, pneumatic, and mechanical systems to determine causes of failures and recommends solutions for repair Maintain cleanliness, functionality, and efficiency of maintenance equipment, tools, and fixtures Other duties may be assigned as needed Job Requirements Strong analytical, problem-solving, and critical thinking skills Ability to coach, develop and build a strong team of employees Strong listening and clear communication skills both written and verbal Ability to manage multiple priorities simultaneously Demonstrated ability to work in a results-oriented environment Forklift and Crane Certification or ability to obtain is required Welding skills preferred Strong working knowledge of electrical and hydraulic systems Ability to review and understand machine blueprints Ability to use hand tools and basic machine shop equipment Lifting may be required with assistance provided if needed Minimum one year of supervisory experience in a manufacturing environment preferred High school diploma or equivalent required, college degree preferred Must have experience in the maintenance field, at least 2 years is preferred Must have previous supervisory or leadership experience Proficient in Microsoft Office including Word and Excel Ability to perform basic mathematical skills such as calculating percentages and volumes and using fractions What CRH Offers You Highly competitive base pay Comprehensive medical, dental and disability benefits programs Group retirement savings program Health and wellness programs An inclusive culture that values opportunity for growth, development, and internal promotion About CRH CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization. If you're up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest! Oldcastle Infrastructure, a CRH Company, is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law.