Controls Technician jobs at Flex Construction

The Syracuse Combined Cycle Plant in Solvay, NY, is a 103 MW facility with a Siemens V64.3 combustion turbine, a Deltak three-drum HRSG, and an Ansaldo steam turbine. This role may also support the Beaver Falls facility, a 107 MW 1x1 combined-cycle dual-fuel cogeneration plant supplying steam to two paper mills. Beaver Falls features a Siemens V64.3 turbine, an Ansaldo steam turbine, a Deltak HRSG, and a Tempella auxiliary boiler. Both plants play a key role in the regional energy landscape, ensuring reliable power and supporting New York's industrial operations. Opportunity Summary The Instrumentation, Controls, & Electrical (IC&E) / O&M Technician is responsible for monitoring the status of all plant systems on a continuous basis. Responds to alarms by taking appropriate corrective actions and executes plant shutdown and start-up procedures as required. Ensures that the plant meets its generating requirements while operating in a safe and efficient manner. This role also involves troubleshooting, calibrating, and repairing instrumentation, DCS, and PLC systems, supporting planned outages, emergency repairs, and routine maintenance tasks under supervisory guidance. Additionally, the technician will participate in plant operations, and assist with administrative duties to ensure the smooth and safe operation of the facility. Your scope of responsibility as IC&E / O&M Technician includes the following primary functions: Perform instrumentation and control (I&C) activities to support planned outages, emergency repairs, and other maintenance tasks to ensure plant systems operate efficiently, reliably, and safely. Troubleshoot, calibrate, and repair power plant instrumentation, Distributed Control Systems (DCS), and Programmable Logic Controllers (PLC). Maintain Continuous Emissions Monitoring System (CEMS) equipment in accordance with regulatory requirements. Conduct routine water chemistry analysis and operate Continuous Emissions Monitoring (CEM) equipment. Follow established preventive and predictive maintenance plans, including testing and operating control equipment and systems. Operate major auxiliary equipment, including air compressors, boiler feedwater and condensate systems, water treatment systems, and locally controlled electrical and mechanical equipment. Execute operational orders from the Control Room Operator (CRO) for starting, securing, or preparing equipment for service in accordance with operating instructions and procedures. Assist the CRO with start-up, shutdown, and normal operations of power plant systems. Perform inspections, make minor repairs, and adjust equipment to maintain proper operating conditions. Maintain plant DC emergency battery backup systems. Collect and log plant operating data. Report any abnormal or irregular conditions that develop during operations and take corrective action within the scope of operating instructions. Participate in root cause analysis of abnormal conditions, alarms, and equipment trips. Ensure all equipment repairs or modifications comply with manufacturer guidelines. Thoroughly understand and follow all plant safety policies and procedures. Adhere to Environmental, NERC, and other regulatory compliance codes and regulations. Maintain accurate records of plant maintenance work using the Computerized Maintenance Management System (CMMS). Support special projects and tasks as assigned by the Plant Manager. NAES Safe Safety is a core value at NAES, and as a condition of employment, all employees are expected to remain mentally alert and work safely at all times. Employees must also adhere to all safety warnings and posted signs while on company property. Additionally, they are required to follow all NAES safety rules and procedures. Adherence to these safety responsibilities is one of the key factors in the evaluation of each employee's performance. Working Relationships The IC&E / O&M Technician reports to the Plant Manager. This position will also coordinate with all other plant personnel in the safe and efficient daily operation of the plant. Physical Requirements and Working Conditions Physical requirements include standing for extended periods of time, climbing stairs and ladders, working from elevated platforms and walkways at varying heights, and routinely lifting up to 50 pounds. Power plant environment that may involve entering confined spaces, crawling through narrow areas, and handling hazardous materials, with exposure to fumes, extreme temperatures, and noise. Work may include high heat near equipment and varying outdoor weather conditions. Some duties may require the use of protective equipment, which can include hard hats, safety glasses, and eye protection, air masks/respirators, ear protection, chemical suits, flame-resistant clothing (FRC), hot gloves, high-voltage protective gear, and fall protection. Fit testing for respirators may be required. Strict smoking restrictions apply in and around the facility. Fitness for Duty All personnel will participate in the Fitness for Duty Program, which includes a post-offer physical examination, drug screening, and post-employment random drug screening. Work Schedule The IC&E / O&M Technician works a standard Monday to Friday day shift schedule, ensuring consistent plant operation and support during regular business hours. This position will also occasionally necessitate extended working hours and flexible shifts as needed, including weekends and holidays, in response to schedules, workload demands, and plant conditions. Periodic callouts or “On call” status will also be required. Some travel may be required as needed in support of the Beaver Falls Generation Facility. Compensation This position offers a base pay rate ranging from $44.29 to $50.21 per hour, along with an annual performance bonus. Core Qualifications and Skills We are seeking a qualified Instrumentation, Controls, and Electrical (IC&E) Technician with hands-on experience in power generation operations and maintenance. The ideal candidate demonstrates strong technical aptitude, a commitment to safety, and a track record of contributing effectively within a team environment to support reliable plant performance. An Associate degree in Plant Technology, Mechanical Engineering Technology, Electrical Engineering Technology, Process Technology, or a related field is preferred. Alternatively, equivalent technical training in industrial maintenance or instrumentation and control is beneficial, though not required. Relevant industry or military experience may be considered in lieu of education on a year-for-year basis. Prior experience in power plant operations within an active generating facility, including operating and maintaining plant systems such as HRSGs, turbines, and auxiliary equipment, and the ability to respond effectively to emergency operations and system dispatch orders, is required. High-level competency in troubleshooting, calibrating, and repairing power plant instrumentation-including pressure and temperature transmitters, thermocouples, pressure and temperature switches, proximity probes, vibration sensors, I/P controllers, flow elements and transmitters, electrical relays, gas analyzers, and speed sensors-is required. Extensive experience in troubleshooting and repairing plant control systems is essential. Knowledge of lockout/tagout (LOTO) procedures and experience maintaining detailed operational records, including Operating Logs, is essential. Experience with piping and instrument schematics and process controls is desirable. Strong leadership and motivational skills are required. Excellent oral and written communication skills are essential. The ability to work well with others, be self-directed, and apply creative solutions to unique problems is desirable. Must possess a valid, unrestricted U.S. driver's license and ensure it remains in good standing at all times. About NAES NAES Corporation is a leading provider of operations, maintenance, and engineering services for energy facilities. We have built a reputation as a reliable partner for clients in North America and internationally, offering services across the power generation, oil and gas, and renewable energy sectors. Our growing family of companies allows us to address the entire life cycle of power generation and other industrial plants. NAES is committed to fostering a diverse and inclusive workplace. We prioritize selecting employees based on merit and competence, seeking individuals of the highest quality, without regard to race, color, religion, national origin, gender, gender identity, sexual orientation, age, disability, military status, or affiliation protected under USERRA, or any other form of discrimination prohibited by applicable local, state, and federal law.

Job DescriptionSalary: $30-$42 per hour OB DESCRIPTION Clopay Corporation is North America's largest residential garage door manufacturer. We pride ourselves on delivering exceptional customer service as well as unsurpassed quality and innovative products. Our employees are the cornerstone of our success and we are looking for dynamic individuals to join our team. Our Troy facility is growing, and we have an excellent opportunity for a full-time Electrical Controls Technicians for 2nd and 3rd shift. The successful candidate will be responsible for the following: Perform Preventative Maintenance Work. Repair electrical, hydraulic, and mechanical equipment. Build and install various types of equipment and fixtures. Assist on any other project or job assigned by Maintenance Leaders. Able to work weekends and overtime as necessary. Willingness to learn new skills in both a classroom environment and on-the-job training. Conduct yourself in a "team spirit of cooperation" throughout the company. Qualifications: Candidates must have either technical schooling, on the job training or 2 years of equivalent experience in a manufacturing facility trouble-shooting mechanical, electrical and hydraulic systems. Candidates that posses controls experience (PLC, Servo, Robot, Motion, VFD's) and/or electrical knowledge are highly desirable. Our employees are rewarded with competitive compensation, comprehensive benefits including tuition reimbursement, paid holidays, sick and vacation time as well as a matching 401(k) savings plan. An Equal Opportunity Employer, providing a drug-free work environment.

Benefits: Employee discounts Flexible schedule Free food & snacks Free uniforms Health insurance Opportunity for advancement Paid time off Training & development Jarvis Smart Homes is seeking a highly skilled Lead Technician to join our team at Jarvis Smart Homes. The ideal candidate will have extensive experience in Wi-Fi and networking, home automation, surround sound and AV, home theater, security cameras, and alarm systems. While this position will be leading others, it is also the expectation that the role will include a fair amount of installation and programming. Responsibilities: • Perform installations and oversee low-voltage technicians and subcontractors. • Assign tasks and manage project timelines and budgets. • Troubleshoot and resolve technical issues on-site to ensure customer satisfaction. • Maintain accurate records of work performed and materials used. • Manage inventory and ensure job site preparation and cleanup. • Deliver a white-glove customer service experience. • Train and mentor junior technicians. • Ensure compliance with safety standards. • Handle programming and follow-up service calls. Qualifications: • Minimum of 2 years of experience managing others in home automation and security systems. • Competency in Wi-Fi/networking, home automation, surround sound and AV, home theater, security cameras, and alarm systems. • Strong troubleshooting skills and ability to resolve technical issues efficiently. • Excellent project management skills. • Strong customer service orientation. Compensation: $20.00 - $35.00 per hour Our company is dedicated to serving our customers and our community. Our team is chosen for their knowledge, experience, training, efficiency and courtesy. If you want to be part of our home-grown culture and winning team, please apply today!

The Controls Technician works with HVAC controls, Installations, Commissioning and Programing. Trusted. Qualified. Knowledgeable. Experienced. Stuart Mechanical provides comprehensive commercial and industrial mechanical services throughout Michigan. These HVAC services include sales, service, installation, building/automation/controls, design & builds, and preventative maintenance. Stuart Mechanical is located in Auburn Hills, Michigan and serves the entire state of Michigan. The majority of our work is in the southeastern region. Markets served but not limited to: education, medical, automotive, religious, retail, technological, construction, fitness, property management companies, facility maintenance, etc. Qualifications Customer Relations 4+ years of experience in service, repair, and installation of commercial HVAC equipment and working with HVAC controls. Installation, Commissioning and Programing. High School Diploma or GED Responsibilities Tridium software, older and newer versions Open protocol networks. Lon, BacNet, Modbus another Integration to OEM and other control systems Networking skills Auto Cad Graphics programs Common Office software Doing pre-submittals and Asbuilts for projects Blueprint reading Wiring Diagrams HVAC Equipment HVAC Sequence of Operation HVAC Troubleshooting HVAC Wiring Disclosure Our company is proud to be an equal opportunity workplace that is strives for inclusion. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, veteran status, or any other protected group. If you have a disability or special need that requires accommodation, please let us know by contacting our VP of People, Myra Ebarb, at ***************** from People and Perks with any questions or requests for accommodation. To all recruitment agencies: We do not accept non partner agreement agency resumes. Please do not forward resumes to our team members, partners, or any other company location. We are not responsible for any fees related to unsolicited resumes.

McGard LLC Electrical Control Technician 1st Shift, 6:00AM-2:30PM, Monday - Friday Hourly rate $28.00 - $44.00 DOE Ability to work overtime during the week and Saturdays as needed Do you have a passion for developing innovative products that make a difference in the world? Look no further than McGard, a leading company in the automotive industry! We are seeking a highly talented and motivated Electrical Controls Technician to join our dynamic team and contribute to our ongoing success. ABOUT MCGARD: McGard has been a trusted name in the automotive industry for over 60 years. We specialize in manufacturing high-quality, precision-engineered automotive security products and components. Our commitment to excellence, innovation, and customer satisfaction has earned us a reputation as a global leader in our field. BENEFITS: Comprehensive benefits package, including 401k with employer match, 10 paid holidays and paid time off (PTO). Discretionary profit sharing. Tuition Reimbursement Program. Exciting and challenging projects in a collaborative work environment. On-site walking trail and convenience cafeteria. RESPONSIBILITY: Following National Electrical Codes and good wiring skills, designs, programs, and performs installations related to Electrical and PLC controlled Equipment. JOB DUTIES: Committed to ensuring the achievement of continuous improvement within area of expertise, as well as areas of business in order to remain at the forefront of meeting Company objectives, thus proactively satisfying customers. This position mandates that all required safety classes, trainings, and certifications be completed and maintained within the specific position/department. Is aware of relevance and importance of their activities and how they contribute to the achievement of the quality objectives. This position requires an employee to work their regularly scheduled shift; ability to work overtime and weekends. Must be aware of and comply with related IATF/ISO procedures, as applicable. Must meet qualitative and quantitative standards for the position and department. Participates in continuing education to successfully complete required training and/or maintain any current required skills or credentials necessary for this position (i.e. First Aid). Assist in troubleshooting and repairing electrical systems and industrial equipment such as motors, starters, relays, solid state circuitry, electro-mechanical components, AC and DC Variable speed drives, Servo motors and associated controllers. Tests operations of equipment and controls for safety and efficiency using standard test equipment and by observing functions. Test electrical and electronic equipment and components for continuity, current, voltage, and resistance. Modify and troubleshoot simple PLC controls as required for proper machine functions with laptop/PC and associated software. With proper approval, orders necessary materials and supplies for fabrication of equipment. Inspects circuits for specified shielding and grounding. Assist in maintaining operational and maintenance manuals as required for machines fabricated or modified. Assist in resolving problems, delays and difficulties. Notify supervisor of problems. Considering personal and coworker safety, complete all job assignments in an expedient manner. Provide technical assistance on new or in-plant equipment. Troubleshoots equipment to determine root cause of the problem. Recommend method of repair. Use a computer (as necessary) to assist in troubleshooting, monitoring computerized equipment, fill out Maintenance requests and/or look up pertinent information. Is trained and participates as a member of Company's Fire Brigade Team. This job description in no way states or even implies that these are the only duties to be performed by this employee. Other duties may be assigned. EDUCATION &/ OR EXPERIENCE: Ability to communicate effectively in English, both written and orally. High school diploma or general education degree (GED) preferred. Two (2) year degree preferred. Minimum two (2) years' experience in a manufacturing setting preferred. Knowledge of security and fire alarm systems. Minimum two (2) years' experience with interpreting electrical schematics. Knowledge and understanding of control software systems to ensure proper systems operation. Knowledgeable and understanding PLC's, HMI's, preferably with Allen-Bradley, and other associated types of programming. "We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law." IND123 #LI-ONSITE

Job Description As a result of our phenomenal growth, MSS Solutions, LLC has an opening for a Senior Project Technician - Controls. If you are an experienced professional who is looking to grow your career and contribute fresh and innovative ideas to serve our customers, this is an opportunity you should explore! A career at MSS is not just a job -- it's collaborating with the business's best talent. It's having a part in building a better future. It's making a difference in people's lives. The success of MSS is a direct reflection of our team's dedication, passion, and hard work. Since 1996, MSS has taken pride in retaining some of the best talents in the industry by promoting a culture of respect, collaboration, and empowerment. Role and Responsibilities Demonstrated experience in startup, commissioning, and programming building automation and controls systems. Demonstrated ability and knowledge of a variety of electronic or digital controls systems with ability to startup, test and make modifications in a variety of controls software system languages. Responsible for device testing (end-to-end), program downloading, equipment start-up and operations. Handle all day to day and escalated customer relation issues. Ability to interpret control drawings, plans and sequence of operations. Capable of hardware installation, software programming, diagnosis and repair of DDC systems at customer locations. Ability to interface and consult with the customer or contractor during site assessments. Ability to represent the company to commercial, industrial and institutional customers. Ability to interface and communicate with customers to ensure a high level of customer satisfaction. Manage all aspects of small projects without the support of the Project Manager. Effectively documents work performed by completing necessary paperwork on each job to include: entering daily time, detailing scope of project progression, and maintaining an electronic database. Maintain customer/contractor satisfaction for continual company growth. Lead in coordinating onsite project initiatives and represent the project team as the lead technician on assigned projects. Assist in monitoring the installation labor of subcontractor to ensure quality standards and project schedule are met. Willing to participate in company training and self-study to improve and maintain technical proficiency in program platforms. Complies with all company safety policies. Other such duties and responsibilities as assigned by the Company from time to time. Qualifications and Requirements Successful candidate(s) will possess a with a minimum of five (5) years of controls field experience. Programming capabilities may include, but not be limited to: Niagara platform, Johnson Controls, Trane and Honeywell Building Management Systems. Must have a minimum of five (5) years demonstrated experience in startup, commissioning, and programming building automation and controls systems. Physical Demands: Occasional sitting, frequent stooping, crouching, kneeling, balancing, and climbing. Constant standing, walking, reaching and gripping. Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Must be able to talk and hear. Occasional lifting up to 50 lbs. (maximum solo lift) and constant lifting to 25 lbs., placing this position in the very heavy physical demand classification (PDC). Material Handling: Frequent lifting up to 50 lbs. and constant lifting up to 25 lbs., placing this position in the very heavy physical demand classification (PDC). Valid driver's license and acceptable driving record required. Must successfully pass a background check & drug test. High School Diploma or Equivalent preferred. Work Environment: Exposure to weather, extreme heat or cold, high noise intensity level, atmospheric conditions, exposure to electrical shock, exposure to toxic or caustic chemicals, wet and/or humid, vibration, proximity to moving mechanical parts, working high exposure places. Benefit Highlights At MSS, we value our employees by providing a supportive culture with competitive compensation and a benefits package that continues to evolve based on our business's growth and our employees' needs. Currently, our benefits include: Medical/Dental/Vision Insurance 401k with Employer Contributions PTO Paid Holidays Employee Assistance Program Long-term Disability Short-term Disability Flexible Spending Plan Health Savings Plan Additional Notes If you are unable to apply electronically and require an accommodation, please contact ************************. MSS Solutions, LLC is an equal opportunity employer and a drug-free environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. MSS Employees, please visit the MSS Career Center or contact HR to apply.

This role will be servicing West Palm Beach area and North. HVAC Service Sr Controls Technician I Build your best future with the Johnson Controls team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support many industries worldwide. You will have the opportunity to develop yourself through meaningful service work and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard - your next great opportunity is just a few clicks away! What we offer Competitive salary Paid vacation/holidays/sick time- 10 days of vacation first year Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy Check us out!: ******************* ZMNrDJviY What you will do Under minimal supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of complete technical competence, mentors control technicians, service technicians and mechanical technicians on building automation activities. Properly completes required project and service documentation. Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of service How you will do it Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software. Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads. Manages assigned work to meet professional and efficient execution of time and customer satisfaction. Reports problems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required ethically and professionally. Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals. Communicates with customers upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customers to become familiar with operating problems. Keeps customer informed on the service provided, outstanding issues and recommends system enhancements, upgrades, and replacement. Promotes the sale of add-on work. Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to all control's technicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors. Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required. Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains the technical workforce on non-complex, non-critical equipment. Compiles job documentation, such as certificate of completion, customer training form, training certificates and punch lists. Conducts extensive self-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. Other duties related to the installing, commissioning and servicing of building controls and facilities management systems and energy management systems, as assigned. Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations, and bill of material, network layouts and electrical schematics as required. Assists in developing and testing software programs necessary to operate the system per the project requirements' intent. Compiles and/or completes project as built and close-out documentation. Assists in the coordination and creation of necessary drawings and equipment schedules for submittals and installation. Selects, orders, and tracks the delivery of materials for assigned projects. Coordinates factory-mounting processes to meet factory and project schedule. Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation. May provide field change information to the project team for the creation of as-built drawings and software. Keeps management and JCI contractor or customer informed of job progress and issues. Assists in performing site-specific training for owner / operator on the total building control system. Participates in release meeting with project field team. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions. What we look for Required Be a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business. Minimum of Four (4) years Commercial Controls troubleshooting experience in the HVAC industry. This includes buildings, chiller plants and systems. Vocational School program graduate or an associate's degree in a technical field, or two years' experience in servicing electronic and or mechanical systems. Demonstrated ability to install and/or service electronic control systems and HVAC equipment. Effective communication skills to represent Johnson Controls on customer sites. Possesses the ability to explain technical information to technical and non-technical people. Demonstrate effective writing skills as well as understanding of programs and software applications. Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems. HIRING HOURLY RANGE: $28.84-$40.86 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at ***************************************** #techhiring Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

HVAC Truck Based Sr Controls Tech II Build your best future with the Johnson Controls team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support many industries worldwide. You will have the opportunity to develop yourself through meaningful service work and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard - your next great opportunity is just a few clicks away! What we offer Competitive salary Paid vacation/holidays/sick time- 10 days of vacation first year Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy Check us out!: ******************* ZMNrDJviY What you will do Under minimal supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of complete technical competence, mentors control technicians, service technicians and mechanical technicians on building automation activities. Properly completes required project and service documentation. Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of service How you will do it Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software. Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads. Manages assigned work to meet professional and efficient execution of time and customer satisfaction. Reports problems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required ethically and professionally. Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals. Communicates with customers upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customers to become familiar with operating problems. Keeps customer informed on the service provided, outstanding issues and recommends system enhancements, upgrades, and replacement. Promotes the sale of add-on work. Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to all control's technicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors. Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required. Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains the technical workforce on non-complex, non-critical equipment. Compiles job documentation, such as certificate of completion, customer training form, training certificates and punch lists. Conducts extensive self-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. Other duties related to the installing, commissioning and servicing of building controls and facilities management systems and energy management systems, as assigned. Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations, and bill of material, network layouts and electrical schematics as required. Assists in developing and testing software programs necessary to operate the system per the project requirements' intent. Compiles and/or completes project as built and close-out documentation. Assists in the coordination and creation of necessary drawings and equipment schedules for submittals and installation. Selects, orders, and tracks the delivery of materials for assigned projects. Coordinates factory-mounting processes to meet factory and project schedule. Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation. May provide field change information to the project team for the creation of as-built drawings and software. Keeps management and JCI contractor or customer informed of job progress and issues. Assists in performing site-specific training for owner / operator on the total building control system. Participates in release meeting with project field team. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions. What we look for Required Be a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business. Minimum of Four (4) years Commercial Controls troubleshooting experience in the HVAC industry. This includes buildings, chiller plants and systems. Vocational School program graduate or an associate's degree in a technical field, or two years' experience in servicing electronic and or mechanical systems. Demonstrated ability to install and/or service electronic control systems and HVAC equipment. Effective communication skills to represent Johnson Controls on customer sites. Possesses the ability to explain technical information to technical and non-technical people. Demonstrate effective writing skills as well as understanding of programs and software applications. Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems. HIRING HOURLY RANGE: $28.50-$37.83 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at ***************************************** Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Build your best future with the Johnson Controls team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support many industries worldwide. You will have the opportunity to develop yourself through meaningful service work and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard - your next great opportunity is just a few clicks away! What we offer Competitive salary Paid vacation/holidays/sick time- 10 days of vacation first year Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy Check us out!: ******************* ZMNrDJviY What you will do Under minimal supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of complete technical competence, mentors control technicians, service technicians and mechanical technicians on building automation activities. Properly completes required project and service documentation. Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of service How you will do it Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software. Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads. Manages assigned work to meet professional and efficient execution of time and customer satisfaction. Reports problems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required ethically and professionally. Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals. Communicates with customers upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customers to become familiar with operating problems. Keeps customer informed on the service provided, outstanding issues and recommends system enhancements, upgrades, and replacement. Promotes the sale of add-on work. Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to all control's technicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors. Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required. Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains the technical workforce on non-complex, non-critical equipment. Compiles job documentation, such as certificate of completion, customer training form, training certificates and punch lists. Conducts extensive self-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. Other duties related to the installing, commissioning and servicing of building controls and facilities management systems and energy management systems, as assigned. Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations, and bill of material, network layouts and electrical schematics as required. Assists in developing and testing software programs necessary to operate the system per the project requirements' intent. Compiles and/or completes project as built and close-out documentation. Assists in the coordination and creation of necessary drawings and equipment schedules for submittals and installation. Selects, orders, and tracks the delivery of materials for assigned projects. Coordinates factory-mounting processes to meet factory and project schedule. Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation. May provide field change information to the project team for the creation of as-built drawings and software. Keeps management and JCI contractor or customer informed of job progress and issues. Assists in performing site-specific training for owner / operator on the total building control system. Participates in release meeting with project field team. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions. What we look for Required Be a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business. Minimum of Four (4) years Commercial Controls troubleshooting experience in the HVAC industry. This includes buildings, chiller plants and systems. Vocational School program graduate or an associate's degree in a technical field, or two years' experience in servicing electronic and or mechanical systems. Demonstrated ability to install and/or service electronic control systems and HVAC equipment. Effective communication skills to represent Johnson Controls on customer sites. Possesses the ability to explain technical information to technical and non-technical people. Demonstrate effective writing skills as well as understanding of programs and software applications. Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems. HIRING HOURLY RANGE: $26.83-33.56 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at ***************************************** #LI-JH1 Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Benefits: Company car Dental insurance Health insurance Paid time off Vision insurance Company Overview: W.W. Gay Mechanical Controls and Integration, a leading Building Control Systems Integration Company in Jacksonville, FL, is seeking a talented Senior HVAC Controls Engineer. Our team is growing, and we are looking for a professional with at least five years of experience in major manufacturers' BMS control products. Preferred systems include Honeywell Webs, KMC Controls, Tridium Niagara AX/N4, and JCI FX. If you have the expertise to manage installations, terminations, programming, start-ups, and commissioning of DDC HVAC Building Control Systems with minimal supervision, we want to hear from you. Key Responsibilities: Project Management: Oversee field start-up activities for construction projects, including field programming, system start-up, documentation, system acceptance, client training, and warranty calls. System Commissioning: Under the technical manager's guidance, perform software start-up and commissioning of complete control systems under operational conditions and simulated seasonal changes. Quality Assurance: Ensure installed programs meet the project's sequence of operations and that all controllers function correctly. User Interface Installation: Install, test, and field-verify a complete Graphical User Interface, providing end-user training on using web-based graphics to control the system. Programming Adjustments: Make necessary programming corrections to account for field conditions, maintain field reports, and update as-built documentation. Dynamic Testing: Conduct dynamic testing of all installed hardware and software. Regulatory Compliance: Ensure uniform and proper installation of controls per company and National Electric Code standards and verify compliance with OSHA and company regulations. Documentation: Maintain accurate checkout sheets and update as-built documentation for timely production of O&Ms. Continuous Learning: Stay current with technical enhancements and new product developments through company-provided training. Team Supervision: Supervise project team members to ensure efficient work within the project scope. Flexibility: Willingness to travel and work outside normal hours as required. Minimum Requirements: Punctual, organized, reliable, and self-motivated. Proficient in Microsoft Office Suite (Excel, Visio, Word). Basic knowledge of electronic circuits and electrical systems, with the ability to understand wiring diagrams and circuits. Strong verbal and written communication skills. Experience in temperature control systems, HVAC systems, DDC controls, HVAC electronics, running conduit, and terminating wiring. Valid driver's license with a clean driving record and reliable vehicle. Must pass a criminal background check and be subject to random drug screening. Ability to work in large-scale construction sites, understanding personal safety, and adapting to changing job locations. Benefits: W.W. Gay Mechanical Controls and Integration offers a comprehensive benefits package to support you and your family, encouraging long-term relationships with our team. Competitive pay: $30-$45 per hour, based on skill level and assessment test. Opportunities for overtime. Dental, vision, and health insurance plans. Group basic life & AD&D insurance. Voluntary life insurance. Voluntary short-term disability. Vacation pay. Company service vehicle with take-home use. Join W.W. Gay Controls and Integration and take your career to the next level with one of the best benefits packages in the industry. Apply today and become a part of our dedicated team of professionals! Compensation: $30.00 - $45.00 per hour We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. For more than 60 years, W. W. Gay has been more than just a leader in mechanical contracting. We have been a place where hardworking professionals build lasting and fulfilling careers. Our success comes from people with integrity, strong character, and a team-first mindset, and we are looking for more individuals like you to join our growing team. Many of our employees choose to stay with us through retirement, finding purpose and opportunity in every project. Whether your skills are in project management, preconstruction, administration, safety, or the trades including plumbing, HVAC, and pipefitting, there is a path forward for you here. As a full-service mechanical contractor since 1962, W.W. Gay is proud to deliver innovative solutions with transparency, efficiency, and a name our clients can trust. What Sets Us Apart • 24/7 HVAC and Plumbing Service • Licensed in multiple states • Financial stability and bonding capabilities of $100 million single project/$350 million aggregate • Leadership within 9 office locations throughout Florida and Georgia • Yearly Service Agreements and Preventative Maintenance • Fleet of over 400 vehicles company-wide • Crane and Construction Equipment (bare and operated) At W.W. Gay, you will find stability, opportunity, and the chance to make an impact every day. W.W. Gay is an Equal Opportunity Employer.

Job DescriptionBenefits: Company car Dental insurance Health insurance Paid time off Vision insurance Company Overview: W.W. Gay Mechanical Controls and Integration, a leading Building Control Systems Integration Company in Jacksonville, FL, is seeking a talented Senior HVAC Controls Engineer. Our team is growing, and we are looking for a professional with at least five years of experience in major manufacturers BMS control products. Preferred systems include Honeywell Webs, KMC Controls, Tridium Niagara AX/N4, and JCI FX. If you have the expertise to manage installations, terminations, programming, start-ups, and commissioning of DDC HVAC Building Control Systems with minimal supervision, we want to hear from you. Key Responsibilities: Project Management: Oversee field start-up activities for construction projects, including field programming, system start-up, documentation, system acceptance, client training, and warranty calls. System Commissioning: Under the technical managers guidance, perform software start-up and commissioning of complete control systems under operational conditions and simulated seasonal changes. Quality Assurance: Ensure installed programs meet the project's sequence of operations and that all controllers function correctly. User Interface Installation: Install, test, and field-verify a complete Graphical User Interface, providing end-user training on using web-based graphics to control the system. Programming Adjustments: Make necessary programming corrections to account for field conditions, maintain field reports, and update as-built documentation. Dynamic Testing: Conduct dynamic testing of all installed hardware and software. Regulatory Compliance: Ensure uniform and proper installation of controls per company and National Electric Code standards and verify compliance with OSHA and company regulations. Documentation: Maintain accurate checkout sheets and update as-built documentation for timely production of O&Ms. Continuous Learning: Stay current with technical enhancements and new product developments through company-provided training. Team Supervision: Supervise project team members to ensure efficient work within the project scope. Flexibility: Willingness to travel and work outside normal hours as required. Minimum Requirements: Punctual, organized, reliable, and self-motivated. Proficient in Microsoft Office Suite (Excel, Visio, Word). Basic knowledge of electronic circuits and electrical systems, with the ability to understand wiring diagrams and circuits. Strong verbal and written communication skills. Experience in temperature control systems, HVAC systems, DDC controls, HVAC electronics, running conduit, and terminating wiring. Valid driver's license with a clean driving record and reliable vehicle. Must pass a criminal background check and be subject to random drug screening. Ability to work in large-scale construction sites, understanding personal safety, and adapting to changing job locations. Benefits: W.W. Gay Mechanical Controls and Integration offers a comprehensive benefits package to support you and your family, encouraging long-term relationships with our team. Competitive pay: $30-$45 per hour, based on skill level and assessment test. Opportunities for overtime. Dental, vision, and health insurance plans. Group basic life & AD&D insurance. Voluntary life insurance. Voluntary short-term disability. Vacation pay. Company service vehicle with take-home use. Join W.W. Gay Controls and Integration and take your career to the next level with one of the best benefits packages in the industry. Apply today and become a part of our dedicated team of professionals!

Your responsibilities As a Mechatronics Technician, you will support the Operations team in the mechanical and electrical maintenance of facility production equipment. You will install, troubleshoot, and repair all production related machinery, mechanical systems and control sub-systems. This position requires a strong commitment to safety as well as demonstrating exemplary safety behavior for colleagues. Key Deliverables: The Mechatronics Technician serves as an engaged and trusted source in the organization. Success in this role is measured by PM Completion, Lessons Learned, CM to PM Work Orders. Key deliverables to ensure success are listed below: * Maintains a safe working environment by complying with all safety and environmental policies in the workplace. Advocates for and promotes a safe work environment by reporting Near Misses and/or other safety and environmental hazards, wearing all required PPE and encouraging others to do the same. * Has authority to stop processes to correct quality, safety or environmental problems, identify and place suspect product on quality hold, and to promptly notify Supervisory personnel when processes become noncompliant. * Creates and conducts preventative and predictive maintenance tasks. * Accurately diagnose equipment problems, implement appropriate solutions and affirm continued effectiveness of repairs and maintenance. * Run diagnostic tests on malfunctioning equipment to determine whether problem is software, hardware, or operator/process related. * Diagnostics and repair in all areas of ABB, Fanuc, Epson, etc., (robotics). * Diagnostics and repair in all areas of Computerized Numerical Control Systems * Diagnostics and repair in all areas of Motion Controls Systems * Restore a complete Motion Control system from various backup media, utilizing documented procedures. * Diagnostics and repair of all Process Control Systems. * Configure, diagnose, and repair RFID systems. * Configure, diagnose, and repair Industrial Vision Systems, including Cognex, Banner, Keyence, Winkhaus, NeuroCheck, etc. * Recognize and repair damaged electrical equipment before it results in lost production time; including but not limited to: light barrier mirrors, cables, proximity switches, relays, and motors. * Installation and repair in accordance with provided schematics and blueprints for mechanical/electrical equipment * Maintain labor and work history reporting into CMMS work-order forms on a daily basis. * Fabricate, turn, machine, grind and weld new and/or repair parts. * Work individually or within cross-functional teams in order to perform all maintenance and repair duties. * Respond to all customers both internal and external with a sense of urgency and professionalism. * Train all Machine Operators in the specifics of maintaining the machines and equipment. * Participate in work/process studies and trials for Continuous Improvement initiatives. * Assist with the specification, design and installation of specialty tools and equipment. * Contribute toward the development of work instructions and maintenance procedures. * Maintain high housekeeping and 6S standards at all times and in all areas including the workshop, personal toolbox and job site during and at completion of all tasks. Company thyssenkrupp Dynamic Components is one of the world's automotive industry leading partners for development and manufacturing of highly complex, state-of-the-art drivetrain technologies for both combustion engines and electric motors. Worldwide, 10 locations with 3,800 employees produce over 25 million drivetrain components per year. The product portfolio includes camshafts and cylinder head cover modules for the valve train as well as rotor shafts for battery electric vehicles. Our electrical A/C compressor, designed for the natural refrigerant CO2, sets new standards in efficient and sustainable thermal management. With precision and passion, we are enabling our customers in the automotive industry to achieve their emission and sustainability targets for more than 30 years. We value diversity thyssenkrupp Dynamic Components Danville, LLC is an equal opportunity employer, including people with disabilities and veterans. Applicants with disabilities may be entitled to reasonable accommodation under the Americans with Disabilities Act and certain state or local laws. For those requiring assistance completing the application or the application process and request information relating to the need for accommodation, please contact reasonableaccommodation@thyssenkrupp.com. Your benefits * Annual Bonus Eligibility of 6% of your base salary! * $1.50 Shift Premium; $3,120 Minimum Annual Potential! * Perfect Attendance Bonus; $2,600 Minimum Annual Potential! * Performance Productivity Bonus, $2,600 Minimum Annual Potential! * Paid Time Off (PTO) * Supplier Discounts * Tuition Reimbursement * Paid Company Holidays * Medical, Dental, Vision, Prescription Drug Coverage * Exclusive free medical services through our partnership with Everside Healthcare for employees and their dependents 3+ years of age. * 401(K) Plan with 5% Company match! Contact We only accept online applications submitted through the 'Apply Now' button on this job posting. You can find all current job openings on our career site at: ******************************** Thank you for your interest in joining our team! Notices: If you are an applicant with a California residency, please click on the following link: California Job Applicant Notice of Collection thyssenkrupp Notice of Fraudulent Job Offers

We are looking for an HVAC Controls Technician to join our service team in Knoxville, TN. Knowledge of mechanical HVAC systems and how they operate is a plus. To be successful in this role, you will need to show initiative, problem-solving, and experience coordinating with company and customer agencies to accomplish tasks safely and efficiently. The ideal candidate has the desire to build a career with a stable, growth-oriented, market-leading company. This position will require strong computer skills with a willingness to learn. Perks: You will be provided with a company vehicle, gas card, and technology package. Benefits: Two Blue Cross/Blue Shield Medical Plans (non-tobacco) offered at no premium cost to all employees. Company paid short-term disability and voluntary long-term disability. Full array of other benefits including Vision, Dental and optional insurance coverage. Paid holidays. Begin accruing PTO hours starting Day 1. 401(k) Employee Assistance Program. Employee discounts Company-paid and voluntary life insurance. Principal Duties and Responsibilities: Perform assigned HVAC maintenance and troubleshooting tasks safely in commercial and industrial settings. Must be able to install conduit, pull wire, and terminate controls based on controls drawings. Demonstrated ability to read controls drawings and understand the steps for installation of BAS Systems. Perform preventative maintenance and repair of controls as needed. Diagnose causes of breakdowns, test parts with appropriate instruments, disassemble and assemble parts, and make necessary repairs to equipment and associated components. Knowledge of Building Automation Systems to ensure proper troubleshooting and repair. Complete required electronic documentation daily on a iPhone, iPad, or computer. Operate company vehicle to complete service calls in a specified territory. Perform other related duties or special projects, as assigned. Experience, Training, and/or Certifications: 3+ years of experience with HVAC controls or commercial HVAC service. Electrical experience with a desire to learn HVAC Controls. Tridium N4 certification or the ability to obtain is required. Additional Requirements Maintain a positive, cooperative, and teachable attitude. Requires mechanical aptitude, mathematical, and English skills. Adhere to company safety policies. Self-motivated / self-starter. Excellent communication and customer services skills. Analytical and problem-solving skills. Professional demeanor and positive, caring attitude. Must be able to work independently and without supervision. Ability to stand, squat, bend, stoop, and comfortably lift up to 60 lbs. Familiarity with blueprint, schematic, drawings, and other equipment layout materials. Ability to pass a full background check, drug screening, MVR, and physical capacity test. Ability to travel, as needed, for projects. Comfort Systems USA Shoffner is the region's leader in HVACR, Electrical, and Plumbing services. We have a well-established reputation for quality work done by quality people and are one of the top 3 largest mechanical contractors in the nation and the value leader in the market. Comfort Systems USA Shoffner is an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regards to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

HVAC TB Sr Controls Tech II Build your best future with the Johnson Controls team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support many industries worldwide. You will have the opportunity to develop yourself through meaningful service work and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard - your next great opportunity is just a few clicks away! What we offer Competitive salary Paid vacation/holidays/sick time- 10 days of vacation first year Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy Check us out!: ******************* ZMNrDJviY What you will do Under minimal supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of complete technical competence, mentors control technicians, service technicians and mechanical technicians on building automation activities. Properly completes required project and service documentation. Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of service How you will do it Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software. Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads. Manages assigned work to meet professional and efficient execution of time and customer satisfaction. Reports problems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required ethically and professionally. Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals. Install and modify software and graphics. Communicates with customers upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customers to become familiar with operating problems. Keeps customer informed on the service provided, outstanding issues and recommends system enhancements, upgrades, and replacement. Promotes the sale of add-on work. Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to all control's technicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors. Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required. Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains the technical workforce on non-complex, non-critical equipment. Compiles job documentation, such as certificate of completion, customer training form, training certificates and punch lists. Conducts extensive self-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. Other duties related to the installing, commissioning and servicing of building controls and facilities management systems and energy management systems, as assigned. Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations, and bill of material, network layouts and electrical schematics as required. Assists in developing and testing software programs necessary to operate the system per the project requirements' intent. Compiles and/or completes project as built and close-out documentation. Assists in the coordination and creation of necessary drawings and equipment schedules for submittals and installation. Selects, orders, and tracks the delivery of materials for assigned. Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation. May provide field change information to the project team for the creation of as-built drawings and software. Keeps management and JCI contractor or customer informed of job progress and issues. Assists in performing site-specific training for owner / operator on the total building control system. Participates in release meeting with project field team. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions. What we look for Required Be a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business. Minimum of Six (6) years Commercial Controls troubleshooting experience in the HVAC industry. This includes buildings, chiller plants and systems. Vocational School program graduate or associate's degree in a technical field, or two years' experience in servicing electronic and or mechanical systems. Demonstrated ability to install and/or service electronic control systems and HVAC equipment. Effective communication skills to represent Johnson Controls on customer sites. Possesses the ability to explain technical information to technical and non-technical people. Demonstrate effective writing skills as well as understanding of programs and software applications. Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems. HIRING HOURLY RANGE: $28.00-$35.00 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at ***************************************** #techhiring Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Build your best future with the Johnson Controls team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support many industries worldwide. You will have the opportunity to develop yourself through meaningful service work and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard - your next great opportunity is just a few clicks away! What we offer Competitive salary Paid vacation/holidays/sick time- 10 days of vacation first year Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy Check us out!: ******************* ZMNrDJviY What you will do Under minimal supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of complete technical competence, mentors control technicians, service technicians and mechanical technicians on building automation activities. Properly completes required project and service documentation. Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of service How you will do it Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software. Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads. Manages assigned work to meet professional and efficient execution of time and customer satisfaction. Reports problems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required ethically and professionally. Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals. Install and modify software and graphics. Communicates with customers upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customers to become familiar with operating problems. Keeps customer informed on the service provided, outstanding issues and recommends system enhancements, upgrades, and replacement. Promotes the sale of add-on work. Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to all control's technicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors. Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required. Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains the technical workforce on non-complex, non-critical equipment. Compiles job documentation, such as certificate of completion, customer training form, training certificates and punch lists. Conducts extensive self-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. Other duties related to the installing, commissioning and servicing of building controls and facilities management systems and energy management systems, as assigned. Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations, and bill of material, network layouts and electrical schematics as required. Assists in developing and testing software programs necessary to operate the system per the project requirements' intent. Compiles and/or completes project as built and close-out documentation. Assists in the coordination and creation of necessary drawings and equipment schedules for submittals and installation. Selects, orders, and tracks the delivery of materials for assigned. Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation. May provide field change information to the project team for the creation of as-built drawings and software. Keeps management and JCI contractor or customer informed of job progress and issues. Assists in performing site-specific training for owner / operator on the total building control system. Participates in release meeting with project field team. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions. What we look for Required Be a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business. Minimum of Six (6) years Commercial Controls troubleshooting experience in the HVAC industry. This includes buildings, chiller plants and systems. Vocational School program graduate or associate's degree in a technical field, or two years' experience in servicing electronic and or mechanical systems. Demonstrated ability to install and/or service electronic control systems and HVAC equipment. Effective communication skills to represent Johnson Controls on customer sites. Possesses the ability to explain technical information to technical and non-technical people. Demonstrate effective writing skills as well as understanding of programs and software applications. Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems. HIRING HOURLY RANGE: $27/Hour-$33.84/Hour (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the Employee Benefits tab on our main careers page at *************************************** Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

HVAC TB Controls Tech I Build your best future with the Johnson Controls team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support many industries worldwide. You will have the opportunity to develop yourself through meaningful service work and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard - your next great opportunity is just a few clicks away! What we offer Competitive salary Paid vacation/holidays/sick time- 10 days of vacation first year Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy Check us out!: ******************* ZMNrDJviY What you will do Under minimal supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of complete technical competence, mentors control technicians, service technicians and mechanical technicians on building automation activities. Properly completes required project and service documentation. Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of service How you will do it Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software. Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads. Manages assigned work to meet professional and efficient execution of time and customer satisfaction. Reports problems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required ethically and professionally. Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals. Communicates with customers upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customers to become familiar with operating problems. Keeps customer informed on the service provided, outstanding issues and recommends system enhancements, upgrades, and replacement. Promotes the sale of add-on work. Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to all control's technicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors. Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required. Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains the technical workforce on non-complex, non-critical equipment. Compiles job documentation, such as certificate of completion, customer training form, training certificates and punch lists. Conducts extensive self-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. Other duties related to the installing, commissioning and servicing of building controls and facilities management systems and energy management systems, as assigned. Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations, and bill of material, network layouts and electrical schematics as required. Assists in developing and testing software programs necessary to operate the system per the project requirements' intent. Compiles and/or completes project as built and close-out documentation. Assists in the coordination and creation of necessary drawings and equipment schedules for submittals and installation. Selects, orders, and tracks the delivery of materials for assigned projects. Coordinates factory-mounting processes to meet factory and project schedule. Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation. May provide field change information to the project team for the creation of as-built drawings and software. Keeps management and JCI contractor or customer informed of job progress and issues. Assists in performing site-specific training for owner / operator on the total building control system. Participates in release meeting with project field team. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions. What we look for Required Be a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business. Minimum of Two (2) years Commercial Controls troubleshooting experience in the HVAC industry. This includes buildings, chiller plants and systems. Vocational School program graduate or an associate's degree in a technical field, or two years' experience in servicing electronic and or mechanical systems. Demonstrated ability to install and/or service electronic control systems and HVAC equipment. Effective communication skills to represent Johnson Controls on customer sites. Possesses the ability to explain technical information to technical and non-technical people. Demonstrate effective writing skills as well as understanding of programs and software applications. Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems. HIRING HOURLY RANGE: $28-$36 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the Employee Benefits tab on our main careers page at *************************************** Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Build your best future with the Johnson Controls team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support many industries worldwide. You will have the opportunity to develop yourself through meaningful service work and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard - your next great opportunity is just a few clicks away! What we offer Competitive salary Paid vacation/holidays/sick time- 10 days of vacation first year Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy Check us out!: ******************* ZMNrDJviY What you will do Under minimal supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of complete technical competence, mentors control technicians, service technicians and mechanical technicians on building automation activities. Properly completes required project and service documentation. Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of service How you will do it Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software. Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads. Manages assigned work to meet professional and efficient execution of time and customer satisfaction. Reports problems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required ethically and professionally. Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals. Install and modify software and graphics. Communicates with customers upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customers to become familiar with operating problems. Keeps customer informed on the service provided, outstanding issues and recommends system enhancements, upgrades, and replacement. Promotes the sale of add-on work. Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to all control's technicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors. Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required. Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains the technical workforce on non-complex, non-critical equipment. Compiles job documentation, such as certificate of completion, customer training form, training certificates and punch lists. Conducts extensive self-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. Other duties related to the installing, commissioning and servicing of building controls and facilities management systems and energy management systems, as assigned. Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations, and bill of material, network layouts and electrical schematics as required. Assists in developing and testing software programs necessary to operate the system per the project requirements' intent. Compiles and/or completes project as built and close-out documentation. Assists in the coordination and creation of necessary drawings and equipment schedules for submittals and installation. Selects, orders, and tracks the delivery of materials for assigned. Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation. May provide field change information to the project team for the creation of as-built drawings and software. Keeps management and JCI contractor or customer informed of job progress and issues. Assists in performing site-specific training for owner / operator on the total building control system. Participates in release meeting with project field team. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions. What we look for Required Be a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business. Minimum of Six (6) years Commercial Controls troubleshooting experience in the HVAC industry. This includes buildings, chiller plants and systems. Vocational School program graduate or associate's degree in a technical field, or two years' experience in servicing electronic and or mechanical systems. Demonstrated ability to install and/or service electronic control systems and HVAC equipment. Effective communication skills to represent Johnson Controls on customer sites. Possesses the ability to explain technical information to technical and non-technical people. Demonstrate effective writing skills as well as understanding of programs and software applications. Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems. Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

What you will do Under minimal supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of complete technical competence, mentors control technicians, service technicians and mechanical technicians on building automation activities. Properly completes required project and service documentation. Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of service How you will do it Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software. Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads. Manages assigned work to meet professional and efficient execution of time and customer satisfaction. Reports problems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required ethically and professionally. Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals. Communicates with customers upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customers to become familiar with operating problems. Keeps customer informed on the service provided, outstanding issues and recommends system enhancements, upgrades, and replacement. Promotes the sale of add-on work. Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to all control's technicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors. Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required. Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains the technical workforce on non-complex, non-critical equipment. Compiles job documentation, such as certificate of completion, customer training form, training certificates and punch lists. Conducts extensive self-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. Other duties related to the installing, commissioning and servicing of building controls and facilities management systems and energy management systems, as assigned. Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations, and bill of material, network layouts and electrical schematics as required. Assists in developing and testing software programs necessary to operate the system per the project requirements' intent. Compiles and/or completes project as built and close-out documentation. Assists in the coordination and creation of necessary drawings and equipment schedules for submittals and installation. Selects, orders, and tracks the delivery of materials for assigned projects. Coordinates factory-mounting processes to meet factory and project schedule. Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation. May provide field change information to the project team for the creation of as-built drawings and software. Keeps management and JCI contractor or customer informed of job progress and issues. Assists in performing site-specific training for owner / operator on the total building control system. Participates in release meeting with project field team. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions. What we look for Required Be a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business. Minimum of Four (4) years Commercial Controls troubleshooting experience in the HVAC industry. This includes buildings, chiller plants and systems. Vocational School program graduate or an associate's degree in a technical field, or two years' experience in servicing electronic and or mechanical systems. Demonstrated ability to install and/or service electronic control systems and HVAC equipment. Effective communication skills to represent Johnson Controls on customer sites. Possesses the ability to explain technical information to technical and non-technical people. Demonstrate effective writing skills as well as understanding of programs and software applications. Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems. Pay Range: $29.00 - 40.00 hourly rate determined by the CBA/rate sheet. Benefits are provided through a local labor union aligned with a collective bargaining agreement. #LI - AD2 #TechnicalHire Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Overview Location: Mokena, IL - Open to Northern IL/Southern WI for right candidate Salary: $91,000 - 115,000 Annually Summary: The Automation Controls Engineer is responsible for the designing, programming, building, installing, and maintaining plant automated systems with guidance from the Electrical Automation Manager. This position will perform various functions relative to electrical controls, trouble shooting and new installations while at the same time periodically instructing and guiding other maintenance and plant personnel. The Automation Controls Engineer also collaborates with Operations personnel seeking ways to optimize plant operations. Principal Duties and Responsibilities: • Programming and troubleshooting PLCs, HMIs and industrial PCs for a variety of industrial automation scenarios • Control box design, build, test, install and maintain • Design electrical control solutions based on custom requirements using the latest version of AutoCAD • Create functional descriptions, flow charts, and control narratives for automation systems and adaptations • Analyze overall plant systems and their operations ensuring proper functionality • Perform electrical preventative maintenance and troubleshooting in a systematic manner when applicable • Plans, directs, and records periodic electrical testing, recommends modification or replacement of equipment failing to meet operating standards • Installs/repairs wiring & small conduit, including the bending and threading of conduit, according to accepted codes and NEC standards • Monitors inventory part levels ensuring timely availability of product • Use electrical instrumentation, process controls, relay logic, and control circuits to wire, configure, and maintain motor control circuits (including Soft Starts and Variable Frequency Drives) • Instructs and supervises personnel and/or contractors on project installations and complying with all safety rules and procedures, including reporting and correcting unsafe actions or conditions in a timely manner • Respond to emergency calls as directed • Create and/or file various written reports, including schematics for new or modified systems and requested work estimates Global Responsibilities: • Regular attendance and physical presence at work is an essential function of this position • This job may require additional duties not listed above and the employee may be asked to perform those duties to meet business needs Qualifications: Education/Specialized Knowledge/Professional Certifications: • High School diploma or equivalent required • Associate or bachelor's degree in engineering preferred, but not required • Specialized education or training preferred • PLC training and experience, college or vocational Experience: • 5+ years' experience in an industrial setting with 110v/208v and 480v • Possess knowledge in PLC architecture, programming, installations, and maintenance practices • Ability to read and interpret manuals, parts catalogs, electrical/control schematics as they apply • Possess basic knowledge of NFPA-70 (NEC) and NFPA 70E (ARC Flash & Electrical Safety) Skills/Abilities: • Work with Safety as an important value, to create a safe work environment for everyone • Ability to work reasonable overtime and off hour occasions as requested by Management • Must be a self-starter and demonstrate a sense of urgency • Possess strong inter-personal and communication skills • Demonstrate and encompass the values of Ozinga Working Conditions: • Operation within a fast-paced environment • Exposed to moving mechanical parts, vehicles, heavy construction equipment, toxic or caustic chemicals, and outside weather conditions • Noise level is usually moderate, but can be high and requires personal hearing protection on occasion at job sites, plants and laboratories • Must be able to work through stressful situations while maintaining professionalism and composure • Local Travel Required • Possibility of short duration, long-distance travel. Physical Requirements: • Regularly required to talk or hear; frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms • Occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl • Must be able to stand and move about job sites with uneven and unpaved ground while managing concrete delivery onsite • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus • Must be able to operate buttons, levers, and other controls located on various equipment • Must be able to work flexible hours as necessary • Must be able to maneuver in and around our plants, yards and jobsites as necessary • Lift/Carry up to 55 pounds frequently • Lift up to 100 pounds occasionally Benefits Information At Ozinga, we care about the well-being of our team members both in and out of the workplace. That's why we're proud to offer a comprehensive benefits package designed to support your health, financial security, and overall quality of life. Our benefits include: • Medical, Dental, and Vision Insurance - Protecting your health and providing peace of mind. • Retirement Plan Options - Helping you build a secure future. • Voluntary Benefits - Helping you to cover unexpected expenses. • Work-Life Balance - Supporting flexibility so you can thrive in every area of your life. • Employee Assistance Program - Offering confidential support for personal and professional challenges. • Wellness Program - Promoting a healthy lifestyle through resources and incentives. We believe that when our co-workers feel their best, they can do their best. Join us and experience the difference of working for a company that values you! Ozinga is an Equal Opportunity Employer. We consider applications for all positions without regard to race, color, religion, creed, gender, national origin, age, disability, sexual orientation, citizenship status, genetic information, or any other legally protected status.