Plumber/Pipefitter jobs at Ford Motor

Plumber Pipefitters are paid a top hourly base rate of $43.460, plus applicable shift, overtime, and holiday premiums. The starting rate for this position is $43.260 with pay increases to the top rate upon completion of three consecutive months of employment. Benefits: Immediate access to Best-in-Class Company provided healthcare! Company provided premium coverage for Hospital-Surgical-Medical plus Drug, Hearing, Dental, and Vision. Basic Life Insurance and Accidental Death and Dismemberment Insurance. Accident and Sickness and Extended Disability Benefits. Automatic enrollment in TESPHE, the hourly employee 401(k) plan, at an initial pre-tax contribution rate of 3%. Also eligible for Company TESPHE contributions of 10% of base pay and $1 per compensated hour. Eligible for holiday pay, profit sharing and lump sum bonuses, paid time off, tuition assistance, and immediate vehicle discount purchase plans. Responsibilities Willingness and ability to work on an assigned schedule, change shifts periodically, work more than 8 hours per day and/or work overtime, while maintaining good attendance. Ability and willingness to learn and follow safety rules and procedures. Ability to learn, remember, and maintain pace of steps involved in performing a job after instruction, training, and familiarization with the tasks. Ability and willingness to understand and follow instructions, both oral or in writing. Ability and willingness to work in a team environment, including helping co-workers, maintaining and promoting a safe work environment, treating co-workers with dignity and respect regardless of personal differences, and accepting and following instructions and requests from leadership. Qualifications Candidates must have completed a bona fide apprenticeship, or have 8 years of previous experience, or have a combination of previous work experience and training equivalent to a bona fide apprenticeship program in the trade. Knowledge and work experience in blueprint reading and layout , pneumatic, fluid, and steam systems, fabrication of pipe systems, pipe, mechanical gas arc, and plasma cutting, lifting and rigging and valve installation and repair. Successful completion of a job interview, pre-employment drug screen and physical are required. Drug panel does not include THC. Ford Motor Company is an equal opportunity employer committed to a culturally diverse workforce. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status, or protected veteran status.

Parker and Sons is currently seeking Service Plumbers to join our team comprised of creative and energetic employees, who are dedicated to delivering the best customer service experience every day. Plumbing related tasks include: water heater replacement and repair, fixture replacement (to include faucets, tubs, showers and toilets), drain cleaning and competent use of conventional sewer machines. This position will act as a mentor to Plumbing Apprentices. **WE ARE BUSY ALL YEAR ROUND - What's In It For Me? Market Value Compensation ($80k - $120k/year or more!) Robust PTO Plan Health, Vision and Dental plans for you and your family to choose from 401K Retirement Plan with company match Life Insurance, Short-Term and Long-Term Disability Special Program Options: FSA, EPA, Legal Services, and Identity Theft Continuous Training for your Professional Development Working in a dynamic, collaborative, and fun environment Coached and supported career growth Responsibilities: What Will I do? Diagnose common and diverse plumbing emergencies efficiently and accurately and perform plumbing services Strong residential service experience and strong trouble shooting skills Water Heater replacement and repair Fixture Replacement (Faucets, Tubs, and Toilet) Drain Cleaning Competent use of conventional sewer machines Qualifications: Do I have What it Takes? A minimum of 2 years residential service & repair experience (diagnosing & troubleshooting a normal plumbing system) Leak Location and Repair, a plus Good analytical skills and attention to detail Experience with Service Titan a plus! Provide exceptional customer service while on the jobsite Results driven in a high-energy environment Must be able to follow directions and work independently Ability work in hot, cold, wet climates depending on the weather Wrench Group and its affiliates are proud to be an Equal Employment Opportunity employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, genetic information, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. The company encourages all qualified candidates who are eligible to work in the United States to apply, but it does not sponsor applicants or employees who require a visa to work legally.

The Pipefitter is responsible for layout and fabrication, assembly, installation, and maintenance of piping/plumbing systems, fixtures and equipment for steam, water, sprinkler, heating, cooling, lubricating and related systems. This work requires practical journeyman level skills and knowledge as pipefitter or industrial plumber. The work may require interpreting specifications, blueprints, manufacturers' manuals, sketches or similar documents. It will also require the ability to plan the sequence of operation and materials according to knowledge of pressure capacities, piping, plumbing operations and materials. Candidate must also be able to perform incidental tasks as required to complete the larger task.

The Pipefitter is responsible for layout and fabrication, assembly, installation, and maintenance of piping/plumbing systems, fixtures and equipment for steam, water, sprinkler, heating, cooling, lubricating and related systems. This work requires practical journeyman level skills and knowledge as pipefitter or industrial plumber. The work may require interpreting specifications, blueprints, manufacturers' manuals, sketches or similar documents. It will also require the ability to plan the sequence of operation and materials according to knowledge of pressure capacities, piping, plumbing operations and materials. Candidate must also be able to perform incidental tasks as required to complete the larger task.

The Pipefitter is responsible for layout and fabrication, assembly, installation, and maintenance of piping/plumbing systems, fixtures and equipment for steam, water, sprinkler, heating, cooling, lubricating and related systems. This work requires practical journeyman level skills and knowledge as pipefitter or industrial plumber. The work may require interpreting specifications, blueprints, manufacturers' manuals, sketches or similar documents. It will also require the ability to plan the sequence of operation and materials according to knowledge of pressure capacities, piping, plumbing operations and materials. Candidate must be able to perform incidental tasks as required to complete the larger task.

The Pipefitter is responsible for layout and fabrication, assembly, installation, and maintenance of piping/plumbing systems, fixtures and equipment for steam, water, sprinkler, heating, cooling, lubricating and related systems. This work requires practical journeyman level skills and knowledge as pipefitter or industrial plumber. The work may require interpreting specifications, blueprints, manufacturers' manuals, sketches or similar documents. It will also require the ability to plan the sequence of operation and materials according to knowledge of pressure capacities, piping, plumbing operations and materials. Candidate must also be able to perform incidental tasks as required to complete the larger task.

**Plumber Pipefitters** are paid a top hourly base rate of $43.460, plus applicable shift, overtime, and holiday premiums. The starting rate for this position is **$43.260** with pay increases to the top rate upon completion of three consecutive months of employment. **Benefits:** **Immediate access to Best-in-Class Company provided healthcare!** + Company provided premium coverage for Hospital-Surgical-Medical plus Drug, Hearing, Dental, and Vision. + Basic Life Insurance and Accidental Death and Dismemberment Insurance. + Accident and Sickness and Extended Disability Benefits. + Automatic enrollment in TESPHE, the hourly employee 401(k) plan, at an initial pre-tax contribution rate of 3%. Also eligible for Company TESPHE contributions of 10% of base pay and $1 per compensated hour. + Eligible for holiday pay, profit sharing and lump sum bonuses, paid time off, tuition assistance, and immediate vehicle discount purchase plans. Willingness and ability to work on an assigned schedule, change shifts periodically, work more than 8 hours per day and/or work overtime, while maintaining good attendance. Ability and willingness to learn and follow safety rules and procedures. Ability to learn, remember, and maintain pace of steps involved in performing a job after instruction, training, and familiarization with the tasks. Ability and willingness to understand and follow instructions, both oral or in writing. Ability and willingness to work in a team environment, including helping co-workers, maintaining and promoting a safe work environment, treating co-workers with dignity and respect regardless of personal differences, and accepting and following instructions and requests from leadership. Candidates must have completed a bona fide apprenticeship, or have 8 years of previous experience, or have a combination of previous work experience and training equivalent to a bona fide apprenticeship program in the trade. Knowledge and work experience in blueprint reading and layout , pneumatic, fluid, and steam systems, fabrication of pipe systems, pipe, mechanical gas arc, and plasma cutting, lifting and rigging and valve installation and repair. Successful completion of a job interview, pre-employment drug screen and physical are required. Drug panel does not include THC. Ford Motor Company is an equal opportunity employer committed to a culturally diverse workforce. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status, or protected veteran status. **Requisition ID** : 40020

Rate of Pay and Benefits: Plumber Pipefitters are paid a top hourly base rate of $44.765, plus applicable shift, overtime, and holiday premiums. The starting rate for this position is $44.565 with pay increases to the top rate upon completion of three consecutive months of employment. Benefits: Immediate access to Best-in-Class Company provided healthcare! * Company provided premium coverage for Hospital-Surgical-Medical plus Drug, Hearing, Dental, and Vision. * Basic Life Insurance and Accidental Death and Dismemberment Insurance. * Accident and Sickness and Extended Disability Benefits. * Automatic enrollment in TESPHE, the hourly employee 401(k) plan, at an initial pre-tax contribution rate of 3%. Also eligible for Company TESPHE contributions of 10% of base pay and $1 per compensated hour. * Eligible for holiday pay, profit sharing and lump sum bonuses, paid time off, tuition assistance, and immediate vehicle discount purchase plans. At Ford Motor Company, our manufacturing team enables our plants and facilities to produce world-class products for customers around the world. Our Manufacturing Team also ensures flawless and efficient assembly of vehicles and components as well as production tooling, design and installation. Our employees are the driving force behind our success. Ford is seeking qualified hourly skilled trades personnel for the manufacturing locations in Louisville, KY. Willingness and ability to work on an assigned schedule, change shifts periodically, work more than 8 hours per day and/or work overtime, while maintaining good attendance. Ability and willingness to learn and follow safety rules and procedures. Ability to perform tasks of the trade, stand for extended periods, walk unassisted, work at heights, work overhead including on ladders and platforms and manipulate tools typical of the trade. Tasks will require a certain amount of reaching, lifting, twisting, bending, and use of a PMHV or hilo. Ability to perceive differences in details and prints related to trade. Must be able to effectively maneuver about vehicles, equipment, assembly lines or stations, and about facility. Ability to learn, remember, and maintain pace of steps involved in performing a job after instruction, training, and familiarization with the tasks. Ability and willingness to understand and follow instructions, both oral or in writing. Ability and willingness to work in a team environment, including helping co-workers, maintaining and promoting a safe work environment, treating co-workers with dignity and respect regardless of personal differences, and accepting and following instructions and requests from leadership. Willingness and ability to work on an assigned schedule, change shifts periodically, work more than 8 hours per day and/or work overtime, while maintaining good attendance. Ability and willingness to learn and follow safety rules and procedures. Ability to perform tasks of the trade, stand for extended periods, walk unassisted, work at heights, work overhead including on ladders and platforms and manipulate tools typical of the trade. Tasks will require a certain amount of reaching, lifting, twisting, bending, and use of a PMHV or hilo. Ability to perceive differences in details and prints related to trade. Must be able to effectively maneuver about vehicles, equipment, assembly lines or stations, and about facility. Ability to learn, remember, and maintain pace of steps involved in performing a job after instruction, training, and familiarization with the tasks. Ability and willingness to understand and follow instructions, both oral or in writing. Ability and willingness to work in a team environment, including helping co-workers, maintaining and promoting a safe work environment, treating co-workers with dignity and respect regardless of personal differences, and accepting and following instructions and requests from leadership.

Rate of Pay and Benefits: Plumber Pipefitters are paid a top hourly base rate of $44.765, plus applicable shift, overtime, and holiday premiums. The starting rate for this position is $44.565 with pay increases to the top rate upon completion of three consecutive months of employment. Benefits: Immediate access to Best-in-Class Company provided healthcare! Company provided premium coverage for Hospital-Surgical-Medical plus Drug, Hearing, Dental, and Vision. Basic Life Insurance and Accidental Death and Dismemberment Insurance. Accident and Sickness and Extended Disability Benefits. Automatic enrollment in TESPHE, the hourly employee 401(k) plan, at an initial pre-tax contribution rate of 3%. Also eligible for Company TESPHE contributions of 10% of base pay and $1 per compensated hour. Eligible for holiday pay, profit sharing and lump sum bonuses, paid time off, tuition assistance, and immediate vehicle discount purchase plans. Candidates must have completed a bona fide apprenticeship, or have 8 years of previous experience, or have a combination of previous work experience and training equivalent to a bona fide apprenticeship program in the trade. Knowledge and work experience in blueprint reading and layout , pneumatic, fluid, and steam systems, fabrication of pipe systems, pipe, mechanical gas arc, and plasma cutting, lifting and rigging and valve installation and repair. Successful completion of a job interview, pre-employment drug screen, physical, and background check are required. Drug panel does not include THC. Ford Motor Company is an equal opportunity employer committed to a culturally diverse workforce. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status, or protected veteran status. Willingness and ability to work on an assigned schedule, change shifts periodically, work more than 8 hours per day and/or work overtime, while maintaining good attendance. Ability and willingness to learn and follow safety rules and procedures. Ability to perform tasks of the trade, stand for extended periods, walk unassisted, work at heights, work overhead including on ladders and platforms and manipulate tools typical of the trade. Tasks will require a certain amount of reaching, lifting, twisting, bending, and use of a PMHV or hilo. Ability to perceive differences in details and prints related to trade. Must be able to effectively maneuver about vehicles, equipment, assembly lines or stations, and about facility. Ability to learn, remember, and maintain pace of steps involved in performing a job after instruction, training, and familiarization with the tasks. Ability and willingness to understand and follow instructions, both oral or in writing. Ability and willingness to work in a team environment, including helping co-workers, maintaining and promoting a safe work environment, treating co-workers with dignity and respect regardless of personal differences, and accepting and following instructions and requests from leadership.

**Rate of Pay and Benefits:** **Plumber Pipefitters** are paid a top hourly base rate of $44.765, plus applicable shift, overtime, and holiday premiums. The starting rate for this position is $44.565 with pay increases to the top rate upon completion of three consecutive months of employment. **Benefits:** **Immediate access to Best-in-Class Company provided healthcare!** + Company provided premium coverage for Hospital-Surgical-Medical plus Drug, Hearing, Dental, and Vision. + Basic Life Insurance and Accidental Death and Dismemberment Insurance. + Accident and Sickness and Extended Disability Benefits. + Automatic enrollment in TESPHE, the hourly employee 401(k) plan, at an initial pre-tax contribution rate of 3%. Also eligible for Company TESPHE contributions of 10% of base pay and $1 per compensated hour. + Eligible for holiday pay, profit sharing and lump sum bonuses, paid time off, tuition assistance, and immediate vehicle discount purchase plans. Willingness and ability to work on an assigned schedule, change shifts periodically, work more than 8 hours per day and/or work overtime, while maintaining good attendance. Ability and willingness to learn and follow safety rules and procedures. Ability to perform tasks of the trade, stand for extended periods, walk unassisted, work at heights, work overhead including on ladders and platforms and manipulate tools typical of the trade. Tasks will require a certain amount of reaching, lifting, twisting, bending, and use of a PMHV or hilo. Ability to perceive differences in details and prints related to trade. Must be able to effectively maneuver about vehicles, equipment, assembly lines or stations, and about facility. Ability to learn, remember, and maintain pace of steps involved in performing a job after instruction, training, and familiarization with the tasks. Ability and willingness to understand and follow instructions, both oral or in writing. Ability and willingness to work in a team environment, including helping co-workers, maintaining and promoting a safe work environment, treating co-workers with dignity and respect regardless of personal differences, and accepting and following instructions and requests from leadership. Candidates must have completed a bona fide apprenticeship, or have 8 years of previous experience, or have a combination of previous work experience and training equivalent to a bona fide apprenticeship program in the trade. Knowledge and work experience in blueprint reading and layout , pneumatic, fluid, and steam systems, fabrication of pipe systems, pipe, mechanical gas arc, and plasma cutting, lifting and rigging and valve installation and repair. Successful completion of a job interview, pre-employment drug screen, physical, and background check are required. Drug panel does not include THC. Ford Motor Company is an equal opportunity employer committed to a culturally diverse workforce. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status, or protected veteran status. **Requisition ID** : 55703

**Rate of Pay and Benefits:** **Plumber Pipefitters** are paid a top hourly base rate of $42.195, plus applicable shift, overtime, and holiday premiums. The starting rate for this position is $41.995 with pay increases to the top rate upon completion of three consecutive months of employment. **Benefits:** **Immediate access to Best-in-Class Company provided healthcare!** + Company provided premium coverage for Hospital-Surgical-Medical plus Drug, Hearing, Dental, and Vision. + Basic Life Insurance and Accidental Death and Dismemberment Insurance. + Accident and Sickness and Extended Disability Benefits. + Automatic enrollment in TESPHE, the hourly employee 401(k) plan, at an initial pre-tax contribution rate of 3%. Also eligible for Company TESPHE contributions of 10% of base pay and $1 per compensated hour. + Eligible for holiday pay, profit sharing and lump sum bonuses, paid time off, tuition assistance, and immediate vehicle discount purchase plans. Willingness and ability to work on an assigned schedule, change shifts periodically, work more than 8 hours per day and/or work overtime, while maintaining good attendance. Ability and willingness to learn and follow safety rules and procedures. Ability to perform tasks of the trade, stand for extended periods, walk unassisted, work at heights, work overhead including on ladders and platforms and manipulate tools typical of the trade. Tasks will require a certain amount of reaching, lifting, twisting, bending, and use of a PMHV or hilo. Ability to perceive differences in details and prints related to trade. Must be able to effectively maneuver about vehicles, equipment, assembly lines or stations, and about facility. Ability to learn, remember, and maintain pace of steps involved in performing a job after instruction, training, and familiarization with the tasks. Ability and willingness to understand and follow instructions, both oral or in writing. Ability and willingness to work in a team environment, including helping co-workers, maintaining and promoting a safe work environment, treating co-workers with dignity and respect regardless of personal differences, and accepting and following instructions and requests from leadership. Candidates must have completed a bona fide apprenticeship, or have 8 years of previous experience, or have a combination of previous work experience and training equivalent to a bona fide apprenticeship program in the trade. Knowledge and work experience in blueprint reading and layout , pneumatic, fluid, and steam systems, fabrication of pipe systems, pipe, mechanical gas arc, and plasma cutting, lifting and rigging and valve installation and repair. Successful completion of a job interview, pre-employment drug screen, physical, and background check are required. Drug panel does not include THC. Ford Motor Company is an equal opportunity employer committed to a culturally diverse workforce. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status, or protected veteran status. **Requisition ID** : 48964

Rate of Pay and Benefits: Plumber Pipefitters are paid a top hourly base rate of $42.195, plus applicable shift, overtime, and holiday premiums. The starting rate for this position is $41.995 with pay increases to the top rate upon completion of three consecutive months of employment. Benefits: Immediate access to Best-in-Class Company provided healthcare! Company provided premium coverage for Hospital-Surgical-Medical plus Drug, Hearing, Dental, and Vision. Basic Life Insurance and Accidental Death and Dismemberment Insurance. Accident and Sickness and Extended Disability Benefits. Automatic enrollment in TESPHE, the hourly employee 401(k) plan, at an initial pre-tax contribution rate of 3%. Also eligible for Company TESPHE contributions of 10% of base pay and $1 per compensated hour. Eligible for holiday pay, profit sharing and lump sum bonuses, paid time off, tuition assistance, and immediate vehicle discount purchase plans. Responsibilities Willingness and ability to work on an assigned schedule, change shifts periodically, work more than 8 hours per day and/or work overtime, while maintaining good attendance. Ability and willingness to learn and follow safety rules and procedures. Ability to perform tasks of the trade, stand for extended periods, walk unassisted, work at heights, work overhead including on ladders and platforms and manipulate tools typical of the trade. Tasks will require a certain amount of reaching, lifting, twisting, bending, and use of a PMHV or hilo. Ability to perceive differences in details and prints related to trade. Must be able to effectively maneuver about vehicles, equipment, assembly lines or stations, and about facility. Ability to learn, remember, and maintain pace of steps involved in performing a job after instruction, training, and familiarization with the tasks. Ability and willingness to understand and follow instructions, both oral or in writing. Ability and willingness to work in a team environment, including helping co-workers, maintaining and promoting a safe work environment, treating co-workers with dignity and respect regardless of personal differences, and accepting and following instructions and requests from leadership. Qualifications Candidates must have completed a bona fide apprenticeship, or have 8 years of previous experience, or have a combination of previous work experience and training equivalent to a bona fide apprenticeship program in the trade. Knowledge and work experience in blueprint reading and layout , pneumatic, fluid, and steam systems, fabrication of pipe systems, pipe, mechanical gas arc, and plasma cutting, lifting and rigging and valve installation and repair. Successful completion of a job interview, pre-employment drug screen, physical, and background check are required. Drug panel does not include THC. Ford Motor Company is an equal opportunity employer committed to a culturally diverse workforce. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status, or protected veteran status.

Rate of Pay and Benefits: Plumber Pipefitters are paid a top hourly base rate of $43.46, plus applicable shift, overtime, and holiday premiums. The starting rate for this position is $43.26 with pay increases to the top rate upon completion of three consecutive months of employment. Benefits: Immediate access to Best-in-Class Company provided healthcare! Company provided premium coverage for Hospital-Surgical-Medical plus Drug, Hearing, Dental, and Vision. Basic Life Insurance and Accidental Death and Dismemberment Insurance. Accident and Sickness and Extended Disability Benefits. Automatic enrollment in TESPHE, the hourly employee 401(k) plan, at an initial pre-tax contribution rate of 3%. Also eligible for Company TESPHE contributions of 10% of base pay and $1 per compensated hour. Eligible for holiday pay, profit sharing and lump sum bonuses, paid time off, tuition assistance, and immediate vehicle discount purchase plans. Responsibilities Willingness and ability to work on an assigned schedule, change shifts periodically, work more than 8 hours per day and/or work overtime, while maintaining good attendance. Ability and willingness to learn and follow safety rules and procedures. Ability to learn, remember, and maintain pace of steps involved in performing a job after instruction, training, and familiarization with the tasks. Ability and willingness to understand and follow instructions, both oral or in writing. Ability and willingness to work in a team environment, including helping co-workers, maintaining and promoting a safe work environment, treating co-workers with dignity and respect regardless of personal differences, and accepting and following instructions and requests from leadership. Ability to perform tasks of the trade, stand for extended periods, walk unassisted, work at heights, work overhead including on ladders and platforms and manipulate tools typical of the trade. Tasks will require a certain amount of reaching, lifting, twisting, bending, and use of a PMHV or hilo. Ability to perceive differences in details and prints related to trade. Must be able to effectively maneuver about vehicles, equipment, assembly lines or stations, and about facility. Qualifications Candidates must have completed a bona fide apprenticeship, or have 8 years of previous experience, or have a combination of previous work experience and training equivalent to a bona fide apprenticeship program in the trade. Knowledge and work experience in blueprint reading and layout , pneumatic, fluid, and steam systems, fabrication of pipe systems, pipe, mechanical gas arc, and plasma cutting, lifting and rigging and valve installation and repair. Successful completion of a job interview, pre-employment drug screen, physical, and background check are required. Drug panel does not include THC. Ford Motor Company is an equal opportunity employer committed to a culturally diverse workforce. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status, or protected veteran status.

Rate of Pay and Benefits: Plumber Pipefitters are paid a top hourly base rate of $43.46, plus applicable shift, overtime, and holiday premiums. The starting rate for this position is $43.26 with pay increases to the top rate upon completion of three consecutive months of employment. Benefits: Immediate access to Best-in-Class Company provided healthcare! Company provided premium coverage for Hospital-Surgical-Medical plus Drug, Hearing, Dental, and Vision. Basic Life Insurance and Accidental Death and Dismemberment Insurance. Accident and Sickness and Extended Disability Benefits. Automatic enrollment in TESPHE, the hourly employee 401(k) plan, at an initial pre-tax contribution rate of 3%. Also eligible for Company TESPHE contributions of 10% of base pay and $1 per compensated hour. Eligible for holiday pay, profit sharing and lump sum bonuses, paid time off, tuition assistance, and immediate vehicle discount purchase plans. Responsibilities Willingness and ability to work on an assigned schedule, change shifts periodically, work more than 8 hours per day and/or work overtime, while maintaining good attendance. Ability and willingness to learn and follow safety rules and procedures. Ability to perform tasks of the trade, stand for extended periods, walk unassisted, work at heights, work overhead including on ladders and platforms and manipulate tools typical of the trade. Tasks will require a certain amount of reaching, lifting, twisting, bending, and use of a PMHV or hilo. Ability to perceive differences in details and prints related to trade. Must be able to effectively maneuver about vehicles, equipment, assembly lines or stations, and about facility. Ability to learn, remember, and maintain pace of steps involved in performing a job after instruction, training, and familiarization with the tasks. Ability and willingness to understand and follow instructions, both oral or in writing. Ability and willingness to work in a team environment, including helping co-workers, maintaining and promoting a safe work environment, treating co-workers with dignity and respect regardless of personal differences, and accepting and following instructions and requests from leadership Qualifications Candidates must have completed a bona fide apprenticeship, or have 8 years of previous experience, or have a combination of previous work experience and training equivalent to a bona fide apprenticeship program in the trade. Knowledge and work experience in blueprint reading and layout , pneumatic, fluid, and steam systems, fabrication of pipe systems, pipe, mechanical gas arc, and plasma cutting, lifting and rigging and valve installation and repair. Successful completion of a job interview, pre-employment drug screen, physical, and background check are required. Drug panel does not include THC. Ford Motor Company is an equal opportunity employer committed to a culturally diverse workforce. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status, or protected veteran status.

**Rate of Pay and Benefits:** **Plumber Pipefitters** are paid a top hourly base rate of $43.46, plus applicable shift, overtime, and holiday premiums. The starting rate for this position is $43.26 with pay increases to the top rate upon completion of three consecutive months of employment. **Benefits:** **Immediate access to Best-in-Class Company provided healthcare!** + Company provided premium coverage for Hospital-Surgical-Medical plus Drug, Hearing, Dental, and Vision. + Basic Life Insurance and Accidental Death and Dismemberment Insurance. + Accident and Sickness and Extended Disability Benefits. + Automatic enrollment in TESPHE, the hourly employee 401(k) plan, at an initial pre-tax contribution rate of 3%. Also eligible for Company TESPHE contributions of 10% of base pay and $1 per compensated hour. + Eligible for holiday pay, profit sharing and lump sum bonuses, paid time off, tuition assistance, and immediate vehicle discount purchase plans. Willingness and ability to work on an assigned schedule, change shifts periodically, work more than 8 hours per day and/or work overtime, while maintaining good attendance. Ability and willingness to learn and follow safety rules and procedures. Ability to perform tasks of the trade, stand for extended periods, walk unassisted, work at heights, work overhead including on ladders and platforms and manipulate tools typical of the trade. Tasks will require a certain amount of reaching, lifting, twisting, bending, and use of a PMHV or hilo. Ability to perceive differences in details and prints related to trade. Must be able to effectively maneuver about vehicles, equipment, assembly lines or stations, and about facility. Ability to learn, remember, and maintain pace of steps involved in performing a job after instruction, training, and familiarization with the tasks. Ability and willingness to understand and follow instructions, both oral or in writing. Ability and willingness to work in a team environment, including helping co-workers, maintaining and promoting a safe work environment, treating co-workers with dignity and respect regardless of personal differences, and accepting and following instructions and requests from leadership Candidates must have completed a bona fide apprenticeship, or have 8 years of previous experience, or have a combination of previous work experience and training equivalent to a bona fide apprenticeship program in the trade. Knowledge and work experience in blueprint reading and layout , pneumatic, fluid, and steam systems, fabrication of pipe systems, pipe, mechanical gas arc, and plasma cutting, lifting and rigging and valve installation and repair. Successful completion of a job interview, pre-employment drug screen, physical, and background check are required. Drug panel does not include THC. Ford Motor Company is an equal opportunity employer committed to a culturally diverse workforce. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status, or protected veteran status. **Requisition ID** : 44978

This job requisition provides candidates to locations throughout Southeast Michigan. This job requisition is not location specific. Rate of Pay and Benefits: Plumber Pipefitters are paid a top hourly base rate of $43.460, plus applicable shift, overtime, and holiday premiums. The starting rate for this position is $43.260 with pay increases to the top rate upon completion of three consecutive months of employment. Benefits: Immediate access to Best-in-Class Company provided healthcare! Company provided premium coverage for Hospital-Surgical-Medical plus Drug, Hearing, Dental, and Vision. Basic Life Insurance and Accidental Death and Dismemberment Insurance. Accident and Sickness and Extended Disability Benefits. Automatic enrollment in TESPHE, the hourly employee 401(k) plan, at an initial pre-tax contribution rate of 3%. Also eligible for Company TESPHE contributions of 10% of base pay and $1 per compensated hour. Eligible for holiday pay, profit sharing and lump sum bonuses, paid time off, tuition assistance, and immediate vehicle discount purchase plans. Candidates must have completed a bona fide apprenticeship, or have 8 years of previous experience, or have a combination of previous work experience and training equivalent to a bona fide apprenticeship program in the trade. Knowledge and work experience in blueprint reading and layout , pneumatic, fluid, and steam systems, fabrication of pipe systems, pipe, mechanical gas arc, and plasma cutting, lifting and rigging and valve installation and repair. Successful completion of a job interview, pre-employment drug screen, physical, and background check are required. Drug panel does not include THC. Ford Motor Company is an equal opportunity employer committed to a culturally diverse workforce. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status, or protected veteran status. Willingness and ability to work on any assigned schedule, change shifts, work more than 8 hours per day and/or work overtime, all while maintaining good attendance. Ability and willingness to learn and follow safety rules and procedures, to work in a team environment, treat co-workers with dignity and respect regardless of personal differences, and accept and follow instructions and requests from leadership. Ability and willingness to understand and follow instructions, both oral or in writing. Ability to perform tasks of the trade, stand for extended periods, walk unassisted, work at heights, work overhead including on ladders and platforms and manipulate tools typical of the trade. Tasks will require a certain amount of reaching, lifting, twisting, bending, and use of a PMHV or hilo. Ability to perceive differences in details and prints related to trade. Must be able to effectively maneuver about vehicles, equipment, assembly lines or stations, and about facility.

**This job requisition provides candidates to locations throughout Southeast Michigan. This job requisition is not location specific.** **Rate of Pay and Benefits:** **Plumber Pipefitters** are paid a top hourly base rate of $43.460, plus applicable shift, overtime, and holiday premiums. The starting rate for this position is $43.260 with pay increases to the top rate upon completion of three consecutive months of employment. **Benefits:** **Immediate access to Best-in-Class Company provided healthcare!** + Company provided premium coverage for Hospital-Surgical-Medical plus Drug, Hearing, Dental, and Vision. + Basic Life Insurance and Accidental Death and Dismemberment Insurance. + Accident and Sickness and Extended Disability Benefits. + Automatic enrollment in TESPHE, the hourly employee 401(k) plan, at an initial pre-tax contribution rate of 3%. Also eligible for Company TESPHE contributions of 10% of base pay and $1 per compensated hour. + Eligible for holiday pay, profit sharing and lump sum bonuses, paid time off, tuition assistance, and immediate vehicle discount purchase plans. Willingness and ability to work on any assigned schedule, change shifts, work more than 8 hours per day and/or work overtime, all while maintaining good attendance. Ability and willingness to learn and follow safety rules and procedures, to work in a team environment, treat co-workers with dignity and respect regardless of personal differences, and accept and follow instructions and requests from leadership. Ability and willingness to understand and follow instructions, both oral or in writing. Ability to perform tasks of the trade, stand for extended periods, walk unassisted, work at heights, work overhead including on ladders and platforms and manipulate tools typical of the trade. Tasks will require a certain amount of reaching, lifting, twisting, bending, and use of a PMHV or hilo. Ability to perceive differences in details and prints related to trade. Must be able to effectively maneuver about vehicles, equipment, assembly lines or stations, and about facility. Candidates must have completed a bona fide apprenticeship, or have 8 years of previous experience, or have a combination of previous work experience and training equivalent to a bona fide apprenticeship program in the trade. Knowledge and work experience in blueprint reading and layout , pneumatic, fluid, and steam systems, fabrication of pipe systems, pipe, mechanical gas arc, and plasma cutting, lifting and rigging and valve installation and repair. Successful completion of a job interview, pre-employment drug screen, physical, and background check are required. Drug panel does not include THC. Ford Motor Company is an equal opportunity employer committed to a culturally diverse workforce. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status, or protected veteran status. **Requisition ID** : 40200

Join a company that values growth, teamwork, and respect! We are under New Management and looking to build a team of excellence! We are looking to add a Residential Service Journeyman Plumber to join our residential team. If you have the motivation and the right skill set, we have the right spot for you. With more than 25 years in the business, Burton Plumbing has expanded to not only specialize in plumbing services, but heating and air, ductwork, insulation, and electrical services. With our expansion comes growth potential and we want you! What We Offer: * Great company culture that focuses on growth, teamwork, and respect, and we like to have fun too! * Employee benefits start on the 1st of the month following hire date. * Medical (3 affordable medical plans to choose from), Dental and Vision Insurance * Company Paid Benefits: Short-Term and Long-Term Disability, Life Insurance * Employee Assistance Program (EAP) * Optional Benefits: Flexible Spending Accounts, Health Savings Accounts, Supplemental Medical Insurance, Pet Insurance, and ID & Legal Shield * 401k with Company Match! * Tuition Reimbursement * Paid Time Off and 9 Paid Holiday * Compensation: Salary between $80k-$100k depending on experience, plus monthly bonus structure! Responsibilities: * Install, maintain, and repair plumbing systems * Determine source of plumbing malfunctions and complete repairs as indicated or according to work orders * Inspect jobs upon completion and ensure areas are clean * Respond to emergency situations, make recommendations and perform required repairs * Submit proper documentation of the work performed Qualifications: * Journeyman Plumbing License * Must have the ability to troubleshoot, identify and correct drain and plumbing issues * Knowledge of video inspection, line locating, and hydro-jetting * Ability to prioritize work and work under sensitive time restraints * Excellent verbal and written communication skills. * Self-starter with strong work ethic. * Valid drivers' license and insurable driving record * Strong knowledge of local plumbing codes * Knowledge of the hazards and safety precautions

Allen Service provides home services, such as electrical and plumbing, as well as heating, ventilation, and air conditioning (HVAC) services. Our expert team has served Fort Collins residents for over six decades and has become a name locals know and trust. We take pride in being a first-class customer service company with an A+ rating with the BBB, so our technicians must have a neat and clean-cut appearance, great communication skills and really enjoy working with and getting to know our customers. We are looking to add an Experienced Service Plumber to our team! The work schedule is Sunday through Wednesday OR Sunday through Thursday! We can be flexible - the only fixed requirement is being available Sunday through Wednesday. If you want to have a 4-day workweek or a 5-day workweek - that is up to you! Why work for Allen Service? * Great company culture that focuses on growth, teamwork, and respect, and we like to have fun too! * Employee benefits start on the 1st of the month following hire date. * Medical (3 affordable medical plans to choose from), Dental and Vision Insurance * Company Paid Benefits: Short-Term and Long-Term Disability, Life Insurance * Employee Assistance Program (EAP) * Optional Benefits: Flexible Spending Accounts, Health Savings Accounts, Supplemental Medical Insurance, Pet Insurance, and ID & Legal Shield * 401k with Company Match! * Tuition Reimbursement * Paid Time Off and 9 Paid Holidays * Performance pay scale based on experience and licensing - our plumbers earn $80,000-$175,000 annually! What You'll Do (Job Responsibilities) * Cultivate strong customer relationships by understanding customer needs and expectations during in-home plumbing service calls * Diagnose, analyze, and resolve plumbing issues in both residential and commercial environments * Install, maintain, and repair plumbing systems and boilers * Pinpoint the root cause of plumbing malfunctions and execute necessary repairs as specified in work orders * Ensure all work adheres strictly to safety and quality regulations * Comply with established service standards, work instructions, and customer requirements * Maintain a clean and organized work site, along with a well-inventoried service vehicle. * Ensure the accurate and timely submission of invoices, timecards, customer feedback, and service option forms * Actively engage in all company training sessions, continued education programs, meetings, and events What We're Looking For (Qualifications) * Minimum of 2 years of plumbing experience, including expertise in drain cleaning, water heater installation, toilet repair/replacement, and other general plumbing services * A Colorado Plumbing license is highly preferred, along with strong knowledge of local plumbing codes * Boiler experience (service, maintenance, and installation) is preferred * Proven ability to diagnose, troubleshoot, and resolve complex drain and plumbing issues efficiently * Proficiency in advanced plumbing techniques, including video inspection, line locating, and hydro-jetting * Self-motivated professional with a strong work ethic and the ability to work effectively both independently and within a team environment * Exceptional written and verbal communication skills and a commitment to maintaining high standards of integrity and continuous self-improvement * Ability to pass comprehensive drug and background screens prior to employment. * Valid driver's license and insurable driving record are required