Quality Control Internship jobs at Ford Motor - 174 jobs

About Rivian Rivian is on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract. As a company, we constantly challenge what's possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it for future generations. Role Summary The qualifying candidate must possess the drive to achieve superior customer satisfaction. They must be goal-oriented, enthusiastic, energetic, self-motivated, with the ability to interact and communicate with all levels of the organization to be effectively successful. The opening is located at our Normal, IL facility and reports directly to the Supervisor in FAME. Responsibilities Operate air, power, and hand tools such as air chisels, prybars, bandsaw, sawzall and angle grinders to destructively test or cut out samples of various types of joining technologies Effectively use hand measuring tools such as calipers, micrometers, and tape measures Complete visual inspections and or destructive testing of components, welds and other joining technologies Use joining inspection sheets to identify weld ID's and other specific critical joints Accurately document and report data in Excel and report results using Jira Standing and working in awkward positions such as but not limited to kneeling, bending, laying and crouched work may be required for extended periods of time to complete inspections and cutting operations Team lifting and moving of large sub-assemblies well over 100 lbs to move them into cutting positions Ability to push pull loads on wheeled dolly over 100 lbs Ability to lift 50 lbs individually Support manufacturing team equipment and process capability analysis Execute product and process validation / inspection plans Assist in performing and teaching all processes and assignments within the department, with the ability to fill in as needed Identify and contain suspect defective material Perform metal cutting and polishing to create measurable lab samples of welded joints Responsible to participate in quality related continuous improvement (Kaizen) projects Develop, maintain, and improve the quality culture within responsible area May perform other duties as assigned Qualifications Welding, fabrication, metal working, or weld inspection experience required Laboratory equipment experience 3+ years of high-volume manufacturing or quality experience (or) An equivalent combination of education, training, and experience Problem solving experience Computer skills: Microsoft Excel, PowerPoint, email - ability to manage files and records effectively Statistical process control / control charts Destructive or non-destructive inspection or testing experience Kaizen / continuous improvement process experience Good oral and written communication skills Geometric dimensioning and tolerancing (GD&T) Ability to stand for 8-12 hours per day. Required to walk; climb or balance; and stoop, kneel, crouch, or crawl. Ability to lift and carry at least 50 pounds. Ability to perform all duties in a working environment that may contain dust, high noise levels, hot and cold weather. Pay Disclosure Hourly Rate for Illinois Based Applicants: $26.00 (actual compensation will be determined based on experience, location, and other factors permitted by law). Benefits Summary: Rivian provides robust medical/Rx, dental and vision insurance packages for full-time employees, their spouse or domestic partner, and children up to age 26. Coverage is effective on the first day of employment, and Rivian covers most of the premiums. Equal Opportunity Rivian is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Rivian is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at candidateaccommodations@rivian.com. Candidate Data Privacy Rivian may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Rivian may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Rivian may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our People Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Rivian affiliates; and (iii) Rivian's service providers, including providers of background checks, staffing services, and cloud services. Rivian may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. Welding, fabrication, metal working, or weld inspection experience required Laboratory equipment experience 3+ years of high-volume manufacturing or quality experience (or) An equivalent combination of education, training, and experience Problem solving experience Computer skills: Microsoft Excel, PowerPoint, email - ability to manage files and records effectively Statistical process control / control charts Destructive or non-destructive inspection or testing experience Kaizen / continuous improvement process experience Good oral and written communication skills Geometric dimensioning and tolerancing (GD&T) Ability to stand for 8-12 hours per day. Required to walk; climb or balance; and stoop, kneel, crouch, or crawl. Ability to lift and carry at least 50 pounds. Ability to perform all duties in a working environment that may contain dust, high noise levels, hot and cold weather. Operate air, power, and hand tools such as air chisels, prybars, bandsaw, sawzall and angle grinders to destructively test or cut out samples of various types of joining technologies Effectively use hand measuring tools such as calipers, micrometers, and tape measures Complete visual inspections and or destructive testing of components, welds and other joining technologies Use joining inspection sheets to identify weld ID's and other specific critical joints Accurately document and report data in Excel and report results using Jira Standing and working in awkward positions such as but not limited to kneeling, bending, laying and crouched work may be required for extended periods of time to complete inspections and cutting operations Team lifting and moving of large sub-assemblies well over 100 lbs to move them into cutting positions Ability to push pull loads on wheeled dolly over 100 lbs Ability to lift 50 lbs individually Support manufacturing team equipment and process capability analysis Execute product and process validation / inspection plans Assist in performing and teaching all processes and assignments within the department, with the ability to fill in as needed Identify and contain suspect defective material Perform metal cutting and polishing to create measurable lab samples of welded joints Responsible to participate in quality related continuous improvement (Kaizen) projects Develop, maintain, and improve the quality culture within responsible area May perform other duties as assigned

Job Purpose The Quality Associate is primarily responsible for ensuring both the quality of products, and of processes in place to efficiently conduct business activities. This includes, but is not limited to, ensuring the maintenance of SOPs, communicating with regulatory agencies and updating safety procedures. Roles and Responsibilities Quality Management Processes Conduct Process Manager Meetings Process Mapping, Maintenance and Improvements Coordinate and support with Process Document Updates Audits Conduct internal safety and process audits to support existing certifications (ISO, CTPAT) Coordinate, prepare and support with audits conducted by external agencies (e.g. ISO 9001; ISO 14001) Provide input to risk management (ISO related items) Quality Assurance SAP Key User Quality Open tickets to resolve system related issues and conduct testing for system changes and upgrades Vendor Management Annual vendor evaluation Conduct vendor Audits, rapid plant assessments and Quality Talks (new and existing vendors) Inventory Management Monitoring of expiring Goods (Monthly Expiration List) Incoming Goods Inspections Lab Maintenance and Development (Processes, Equipment, Sample Kits) Specifications (Process and Maintenance) Inspections (Maintain Inspection Plans, Process Inspection Lots, First Article Inspections) Manage Relabeling and repacking process Claims Process Quality, Label and Expiration Claims and document and investigate warehouse claims Escalate claims outside of target runtime (internal and external) and implement corrective actions Desired Experience: Bachelor's degree in a Science, Engineering, or related field ASQ Certification or similar SAP experience MS Office 365 experience Minimum of 5+ years of full-time work experience in similar role Demonstrated interpersonal and communicative skills Desired Skills: Results driven, action-oriented when working on assignments Experience with project management, able to see planned ideas right through to implementation stage, creativity, and strategic thinking skills Strong verbal and written communication skills Strong organizational and interpersonal skills, ability to manage competing priorities across multiple requests (time management). Comfort with ambiguity in project work and a changing external environment Demonstrates ability to remain objective in stressful situations Ability to multi-task and thrive in a fast-paced environment Ability to work independently and in a team environment Service oriented, demonstrates excellent communication and follow-up skills Active listening to understand the vendors and customers' needs Experience in coordinating quality initiatives with various departments Company Benefits: Competitive Salaries Flexible Working Hours Paid time off and holidays 401(k) with company match Work & Personal Life Health & Wellness Comprehensive Health Coverage Yearly Wellness Day Monthly Fitness Stipend Development Opportunities Student Loan Assistance Yearly professional development stipend for external training and education Professional development programs offered by the global Wurth Group Networking Opportunities on a Global Scale Additional Benefits & Office Culture Hybrid in-office schedule Monthly Culture Club Events Flexible workspace including common areas, recharge room and kitchen stocked with drinks and snacks

We are currently seeking a Sequencing Inspector Team Members for the 1st shift(6am-2pm) at our Arlington, TX facility. (1 position available) Our Sequencing Inspector Team Members are key components of our organization. Team Members are expected to inspect all parts before parts are shipped to GM. Team Members must maintain a safe and clean work environment by complying with procedures, rules, and regulations. General Job Duties: Perform receiving inspection activities on supplier parts. Document and file results of receiving inspection activities. Create and manage Quality Notices (complaints) for suppliers. Generate supplier scrap reports and debit memos. Prepare Return to Vendor (RTV) memos. Track and document cost recovery trends. Organize and file rejection, scrap, and cost recovery information. Support manufacturing departments with containment and inspection of supplier parts. Adhere to all safety protocols, including LOTO and PPE requirements. Identify and address quality issues effectively. Demonstrate strong problem-solving skills and prioritize tasks to meet customer requirements. Exhibit teamwork skills and actively participate in a positive work environment. Contribute to continuous improvement initiatives and lean manufacturing efforts. Assist operations in achieving daily production goals and departmental objectives. Conduct daily process audits based on product audit schedules and requirements. Create Quality Alerts and ensure proper communication flow. Participate in containment activities. Work overtime as needed in accordance with company policy. Perform all assigned tasks according to SOPs, safety alerts, and quality alerts. Other duties as assigned. Education Requirements High school diploma or GED. IAC Perks: 401(k) Health, Dental and Vision Insurance Paid time off Company events Employee Assistance Program (EAP) Career growth opportunities Looking for a next-level career? Apply today!

Job DescriptionSalary: Starting $19 per hour Role: Responsible for monitoring the overall quality process in the label production with decisions on a suspect or non-conform product (raw material, semi-finished goods, finished goods) to ensure quality standards are reached, and customer satisfaction is achieved. As a part of this role, you will support the internal audit process by executing product/procedural audits. Assisting the corrective actions process by participating in the root cause analysis as the elaboration and implementation of disciplinary actions. Support the conformity management process by collecting and entering data and, treating customer and supplier complaints and assisting the measuring instruments process by maintaining proper instrument calibrations . Required Skills/Abilities: Good communication skills (written and verbal) Ability to work physically (Standing, lifting, sorting) Familiar with the Microsoft Office suite and able to maneuver with web-based software Good Audit & Investigation skills English Language Detail Orientated Integrity Adaptable/flexible Analytical Spanish good to have but not required Education and Experience: High school diploma or equivalent- Required Experience in label production- Preferred 2+ years of manufacturing experience- an asset Prior QA experience - Preferred Responsibilities: Be available to respond to the production floor's quality demands. Making quality decisions for the proper treatment of a non-conform product. Sort finished or semi-finished goods or supply the information/samples required for production to sort Verify the conformity of raw material/cutting tools at their reception. Execute required audits. Complete the COAs for customers. Assist QC Supervisor in quantifying production non-conformances in the non-conformance report. Support QC Supervisor on customer emails. (Complaints, documentation requests, etc.) Support QC Supervisor on customer relations. (attending to calls, documentation requests, and complaint follow-ups, etc.) Conduct investigations of customer complaints. Data management: Entering customer complaints & corrective actions in our software (X3 Web system). Input/Track all supplier complaints in our software (X3 Web system). Support the Quality Control Supervisor to elaborate corrective actions by working directly on the cause. Support the QC Supervisor in the implementation and verification of corrective actions. Assist with supplier complaints investigations. Work with our QC Supervisor to prepare customer and supplier claims/complaints. Assist Process Manager 10 with the management of measuring instruments and calibration guides. Assist the technical department with quality assurance testing. Assist the QC Supervisor with the maintenance of the documentation system (Elaborating, modifying, applying, and removing documents) Participate in any additional improvement projects defined by the immediate supervisor or IML Labels. IML Labels Chicago Inc. is an equal-opportunity employer. We do not discriminate based on race, color, ethnicity, ancestry, national origin, religion, sex, gender, gender identity, gender expression, sexual orientation, age, disability, veteran status, genetic information, marital status, or any legally protected status. Women, minorities, individuals with disabilities, and protected veterans are encouraged to apply.

The QC Han-Cho will support the QC Shoko-Cho's plans in maintaining the efficiency of the productivity, ensuring the safety of the team members, developing continuous improvement activities and implementing any necessary 5S or 3 Pillar activities. Other duties and responsibilities of the Han-Cho include: * Determine where team members will be placed taking the absenteeism into account * Complete PM checksheet items, all final checks, PCS and QCS sheets line sides, and Complete any daily tracking charts. * Review production report from previous shift. * Review and Complete Communication Log and Inform Team Members of Abnormal Situations * Review and discuss any quality issues or customer issues from previous day. Go over any operator issues then address them. * Complete Mfg. Check sheets for the first piece * Monitor Sekisyo stand. Should be clear from the previous shift. Rotate first piece on the first and final sekisyo stand. * Perform Mfg. Hourly check sheets and communicate any problems or counter measures put in place to the appropriate personnel * Facilitate safety communication to team member. Ensure team members are practicing proper ergonomics and safe behavior. Ensure team members know evacuation plan. Monitor that team members are wearing proper PPE. * Ensure quality of product running on the lines in the department and ensuring appropriate communication of defects and actions taken when received. * Investigate final inspection results and assist Shoko-Cho with implementing counter measures. * Document any abnormals or quality issues and inform the Shoko-Cho. Provide good feedback to the appropriate personal and establish counter measures. * Investigate defective parts and report conditions to Quality and review with t/m's. * Assist in rework and sorts. * Answer andons promptly for your area. Provide any support necessary to keep line running. Make any repairs necessary throughout day. * Respond to any Stop Call Waits issued by Team Members and assist in implementing short term C/M to get line running and in preventing future downtime. * Ensure T/M's are performing production activities and following standard work * Coordinate repair arrangements for broken tools. Confirm tools after repair. * Audit processes to ensure that t/m's are following the established standardized work. Make sure t/m's are practicing good assy. Techniques. * Remain knowledgeable on all current and new models. * Assist Shoko-Cho in scheduling training for T/M's and completing all training documentations required * Assist in Kaizen or other continuous improvement activities for the department * Communicate with other shifts Han-Cho or Shoko-Cho and inform them of any problems such as part shortages, quality problems, safety problems, Kaizens activity and any machine failures. Diversity Statement AISIN is committed to workforce diversity, creating equity and advancing a culture of inclusion in which every team member is treated fairly and with respect. Our inclusive work environment brings together a variety of backgrounds, skills, education and perspectives. Attracting and retaining a diverse and inclusive workforce requires that everyone have an equal opportunity to participate, contribute, and advance.

The QC Han-Cho will support the QC Shoko-Cho's plans in maintaining the efficiency of the productivity, ensuring the safety of the team members, developing continuous improvement activities and implementing any necessary 5S or 3 Pillar activities. Other duties and responsibilities of the Han-Cho include: Determine where team members will be placed taking the absenteeism into account Complete PM checksheet items, all final checks, PCS and QCS sheets line sides, and Complete any daily tracking charts. Review production report from previous shift. Review and Complete Communication Log and Inform Team Members of Abnormal Situations Review and discuss any quality issues or customer issues from previous day. Go over any operator issues then address them. Complete Mfg. Check sheets for the first piece Monitor Sekisyo stand. Should be clear from the previous shift. Rotate first piece on the first and final sekisyo stand. Perform Mfg. Hourly check sheets and communicate any problems or counter measures put in place to the appropriate personnel Facilitate safety communication to team member. Ensure team members are practicing proper ergonomics and safe behavior. Ensure team members know evacuation plan. Monitor that team members are wearing proper PPE. Ensure quality of product running on the lines in the department and ensuring appropriate communication of defects and actions taken when received. Investigate final inspection results and assist Shoko-Cho with implementing counter measures. Document any abnormals or quality issues and inform the Shoko-Cho. Provide good feedback to the appropriate personal and establish counter measures. Investigate defective parts and report conditions to Quality and review with t/m's. Assist in rework and sorts. Answer andons promptly for your area. Provide any support necessary to keep line running. Make any repairs necessary throughout day. Respond to any Stop Call Waits issued by Team Members and assist in implementing short term C/M to get line running and in preventing future downtime. Ensure T/M's are performing production activities and following standard work Coordinate repair arrangements for broken tools. Confirm tools after repair. Audit processes to ensure that t/m's are following the established standardized work. Make sure t/m's are practicing good assy. Techniques. Remain knowledgeable on all current and new models. Assist Shoko-Cho in scheduling training for T/M's and completing all training documentations required Assist in Kaizen or other continuous improvement activities for the department Communicate with other shifts Han-Cho or Shoko-Cho and inform them of any problems such as part shortages, quality problems, safety problems, Kaizens activity and any machine failures.

Fisher Dynamics is the automotive industry's premier supplier of safety - critical seat structures and mechanisms. Steeped in a tradition of excellence, and rooted in automotive innovation, the Fisher story is filled with automotive manufacturing milestones. We bring design, engineering, and manufacturing vehicle seating systems to a new level with innovative thinking. We're about cutting edge ideas. We have created an environment that encourages an uninterrupted flow of revolutionary concepts and unique ideas Fisher is currently seeking a Quality Technician on 1st shift at our Saint Clair Shores, MI facility. This position is responsible for inspecting and monitoring parts to ensure good quality parts are produced. Lead and or support the production area in continuous improvement efforts. Ensure quality products are delivered to customers and address customer concerns and issues. The department is structured as a formal team, and requires the ability to work within the team. Essential Duties & Responsibilities: Set-up and check dimensions on parts, using metrology instruments, to ensure parts meet quality standards and that dimensions are accurate Enter data into the computer from paper documents for record keeping purposes Check, sort, and file paperwork Red tag and create repair orders for non-conforming parts Interface with the Quality Manager to address quality issues Resolve customer issues at the customer level Ability to act as liaison between the company and the customer Perform gage studies and capability studies Problem solving Continuous improvement activities, support Red X / DOE activities Various other duties as required by the department Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Experience Two to Four years of experience preferred Skills Ability to follow established procedures Strong attention to detail and multi-tasking ability Knowledge of IATF16949 quality standards and Statistical process control (SPC); stamping; GD&T with applications and blueprint reading. Must be able to operate basic metrology instruments, optical comparator, hardness tester and Coordinate Measurement Machine. Calibration of equipment gages Perform sorts, audits or rework products Quality standards - AIAG/ASQC. ASME, ISO Communication skills to communicate and interact with all levels of employees, customers and suppliers Computer skills and math skills sufficient to perform department related tasks are required Ability to work effectively with people Licensure Valid driver's license Safety Safety glasses and hearing protection required. Other safety equipment required on an as needed basis. Work Environment Working environment and physical requirements of this position are those typical of an office setting and manufacturing environment. Physical Demands Working environment and physical requirements of this position are those typical of a manufacturing environment. Job requires very frequent visual effort and concentration, and the ability to move throughout the plant. The ability to lift 40 pounds is required. The work requires regular standing, moving about, and involves a variety of physical activities. Travel to customer locations as needed.

Dynamic Manufacturing, Inc. has an exciting opening for a motivated Quality Technician to join our team! A successful Quality Technician will be mechanically inclined, display a continuous improvement mindset, and ideally have experience in a manufacturing or aerospace environment. At Dynamic Manufacturing, we offer: An Engaging Work Environment Opportunities for Advancement Tuition Reimbursement Competitive Pay (we pay weekly!) Comprehensive Benefits Package & 401(k) Match Generous Paid Time Off, and more! Responsibilities: Write and revise Job Instructions, Control Plans, Quality Alerts, Support Documents, or other documents as required and process ECIs accordingly. Review training records of Job Instructions, Control Plans, Quality Alerts, Support Documents, or other documents as required. Perform PPAP Audits and assist with PPAP activities. Update 3 Panel Charts - Root Cause for weekly Quality meetings. Create monthly Warranty Charts to present to customer. Work with Production, Calibration and Engineering Team members to address fixturing and inspection gaging issues. Perform weekly LPAs (Layered Process Audits) and maintain reports. Assist with Containment, sorting and receiving inspection activities as required. Be a problem first responder and assist with resolving production issues, determine Root Cause and disposition nonconforming products. Interface with CMM Inspection Lab and Teardown and Sediment Labs as necessary to resolve issues. Use QAD to determine stock locations and quantities for suspect material and other activity, as necessary. Perform inspections with Calipers, Micrometers, or other devices, as necessary. Visual Factory maintenance, daily Torque and Masters checks. Ensure compliance and assist with adherence to the Quality Management system (IATF16949/ISO9001). Qualifications: 1-2 years experience in a related field Working knowledge of Excel and Word. Ability to learn Access, Teams, OneNote and QAD. Familiarity with IATF16949 or other quality systems desirable. Manufacturing experience as a quality inspector or quality technician preferred. Able to perform basic mathematical calculations. Strong written and verbal communication skills. Spanish as a second language a plus. Ability to work in shop floor environment & be able lift 50 lbs. The above statements are intended to describe the general nature and level of the work being performed in this job. This is not an exhaustive list of all duties and responsibilities. The management of Dynamic Manufacturing, Inc. reserves the right to amend and change responsibilities to meet business and organizational needs. WHY CHOOSE DYNAMIC? Dynamic Manufacturing is a family owned and operated organization formed in 1955 by John Partipilo. Our organization specializes in the manufacture of automotive, off-road, industrial and racing powertrain products. This includes Torque Converters, Transmissions (Automatic, Manual, Hybrid models) and Transfer Case Assemblies. Our organization started with a single retail facility and a dream. Today, we serve the aftermarket and several OE customers. Our operations consist of almost a million square feet of floor space and 1,000+ extremely talented employees encompassing turnkey operations from engineering, total machining operations, through assembly and dynamometer testing. We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Donaldson is committed to solving the world's most complex filtration challenges. Together, we make cool things. As an established technology and innovation leader, we are continuously evolving to meet the filtration needs of our changing world. Join a culture of collaboration and innovation that matters and a chance to learn, effect change, and make meaningful contributions at work and in communities. Role Responsibilities: Performing a variety of quality control tests/inspections on products, materials, parts, assemblies, etc., at various stages of the production process to ensure compliance with quality and reliability standards. Recording data and writing summaries to validate or show deviations from existing standards/specifications. Participating in meetings and monitoring hold activity, logs, etc. Investigating customer complaints and returns. Providing product failure analysis support. Participating in problem prevention planning to communicate, evaluate and prevent/resolve quality problems. Recommending modifications to existing products, or suggesting new standards, methods and procedures. Coordinates internal auditing process consisting of conducting audits and following up on audit activity. Calibrating gauges and test equipment as required by calibration schedules. Applying basic skills with opportunity to develop advanced skills. Duties and tasks are standardized. Resolving routine questions and problems and referring more complex issues to higher level employees. Minimum Qualifications: High School diploma or equivalent Immigration Sponsorship Not Available: · Applicants for this position must be currently and legally authorized to work in the United States without the need for current or future sponsorship (e.g., H-1B, J-1, F-1, CPT, OPT, etc.). · Donaldson will not offer immigration sponsorship or assume sponsorship of an employment visa for this position. · International relocation or remote work arrangements outside of the U.S. will not be considered. Keywords: Adaptability, Detail, Accuracy, Aerospace, Organization Equal Opportunity Employer, including Disability and Veterans Employment opportunities for positions in the United States may require use of information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States. Donaldson Company has been made aware that there are several recruiting scams that are targeting job seekers. These scams have attempted to solicit money for job applications and/or collect confidential information, Donaldson will never solicit money during the application or recruiting process. Donaldson only accepts online applications through our Careers | Donaldson Company, Inc. website and any communication from a Donaldson recruiter would be sent using a donaldson.com email address. If you have any questions about the legitimacy of an employment opportunity, please reach out to ******************************* to verify that the communication is from Donaldson. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law.

Donaldson is committed to solving the world's most complex filtration challenges. Together, we make cool things. As an established technology and innovation leader, we are continuously evolving to meet the filtration needs of our changing world. Join a culture of collaboration and innovation that matters and a chance to learn, effect change, and make meaningful contributions at work and in communities. Position Summary: The Quality Control Inspector is responsible for verifying product quality, conducting inspections and tests, and documenting results to ensure compliance with internal and external requirements. This role actively participates in problem-solving, root cause analysis, and continuous improvement efforts across the organization. Role Responsibilities: * Perform inspections and testing of products to ensure compliance with specifications and quality standards. * Read and interpret blueprints, engineering drawings, and bills of materials. * Document inspection results, including Certificates of Conformance and other quality records. * Investigate customer complaints and product returns, and implement containment measures. * Participate in root cause analysis and develop corrective and preventive actions. * Calibrate and maintain standard measuring equipment (gauges, calipers, tooling). * Support the Production Part Approval Process (PPAP) and ISO 9001 requirements. * Resolve nonconforming material using company resources and procedures. * Collaborate with production, engineering, and management to drive continuous improvement. * Adhere to all EHS and PPE policies while maintaining a safe and positive work environment. Minimum Qualifications: * High school diploma or GED with at least 1 year of quality control experience. * Knowledge of ISO 9001 or similar quality standards and quality techniques (e.g., SPC, PPAP). * Strong communication skills and proficiency with Microsoft Office. * Ability to work independently and in a fast-paced, team-oriented environment, including off-shifts or extended hours as needed. Preferred Qualifications: * Associate's degree or technical certification in quality, manufacturing, or related field. * 2+ years of quality control experience in a manufacturing environment. * Experience with ISO 9001 audits, SPC, PPAP, and root cause analysis. * Proficient with dimensional measurement tools, calibration, and interpreting blueprints. * Strong problem-solving skills with ability to support continuous improvement in a fast-paced environment. Immigration Sponsorship Not Available: * Donaldson will not offer immigration sponsorship or assume sponsorship of an employment visa for this position. * International relocation or remote work arrangements outside of the U.S. will not be considered. Keywords: Quality Assurance, Inspection, ISO9001 Equal Opportunity Employer, including Disability and Veterans Employment opportunities for positions in the United States may require use of information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States. Donaldson Company has been made aware that there are several recruiting scams that are targeting job seekers. These scams have attempted to solicit money for job applications and/or collect confidential information, Donaldson will never solicit money during the application or recruiting process. Donaldson only accepts online applications through our Careers | Donaldson Company, Inc. website and any communication from a Donaldson recruiter would be sent using a donaldson.com email address. If you have any questions about the legitimacy of an employment opportunity, please reach out to ******************************* to verify that the communication is from Donaldson. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law.

Donaldson is committed to solving the world's most complex filtration challenges. Together, we make cool things. As an established technology and innovation leader, we are continuously evolving to meet the filtration needs of our changing world. Join a culture of collaboration and innovation that matters and a chance to learn, effect change, and make meaningful contributions at work and in communities. Position Summary: The Quality Control Inspector is responsible for verifying product quality, conducting inspections and tests, and documenting results to ensure compliance with internal and external requirements. This role actively participates in problem-solving, root cause analysis, and continuous improvement efforts across the organization. Role Responsibilities: Perform inspections and testing of products to ensure compliance with specifications and quality standards. Read and interpret blueprints, engineering drawings, and bills of materials. Document inspection results, including Certificates of Conformance and other quality records. Investigate customer complaints and product returns, and implement containment measures. Participate in root cause analysis and develop corrective and preventive actions. Calibrate and maintain standard measuring equipment (gauges, calipers, tooling). Support the Production Part Approval Process (PPAP) and ISO 9001 requirements. Resolve nonconforming material using company resources and procedures. Collaborate with production, engineering, and management to drive continuous improvement. Adhere to all EHS and PPE policies while maintaining a safe and positive work environment. Minimum Qualifications: High school diploma or GED with at least 1 year of quality control experience. Knowledge of ISO 9001 or similar quality standards and quality techniques (e.g., SPC, PPAP). Strong communication skills and proficiency with Microsoft Office. Ability to work independently and in a fast-paced, team-oriented environment, including off-shifts or extended hours as needed. Preferred Qualifications: Associate's degree or technical certification in quality, manufacturing, or related field. 2+ years of quality control experience in a manufacturing environment. Experience with ISO 9001 audits, SPC, PPAP, and root cause analysis. Proficient with dimensional measurement tools, calibration, and interpreting blueprints. Strong problem-solving skills with ability to support continuous improvement in a fast-paced environment. Immigration Sponsorship Not Available: · Donaldson will not offer immigration sponsorship or assume sponsorship of an employment visa for this position. · International relocation or remote work arrangements outside of the U.S. will not be considered. Keywords: Quality Assurance, Inspection, ISO9001 Equal Opportunity Employer, including Disability and Veterans Employment opportunities for positions in the United States may require use of information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States. Donaldson Company has been made aware that there are several recruiting scams that are targeting job seekers. These scams have attempted to solicit money for job applications and/or collect confidential information, Donaldson will never solicit money during the application or recruiting process. Donaldson only accepts online applications through our Careers | Donaldson Company, Inc. website and any communication from a Donaldson recruiter would be sent using a donaldson.com email address. If you have any questions about the legitimacy of an employment opportunity, please reach out to ******************************* to verify that the communication is from Donaldson. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law.

Job Description SUMMARY: The Quality Technician is primarily responsible for ensuring product quality by conducting inspections, verifying compliance with quality standards, supporting assembly, molding and paint operations, and maintaining accurate documentation. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. · Perform first-piece inspections on all active molding and assembly presses at the start of the shift including color checks, SPC measurements, and gaging. · Collect parts from molding and assembly for SPC checks once per shift. · Make quality decisions per the proper standards and samples. · Review, create, and sign off on labels, mold/color change logs, and other required documentation for management. · Review and update quality alerts; ensure alerts are properly addressed. · Conduct mid-shift audits via various documents and record findings. · Contain and clearly label any defective parts found during the shift. · Respond to operator-reported issues and ensure defective items are held from production. · Sort parts on hold during downtime and return acceptable parts to production or remove from the system. · Assist in updating Work Instructions (WI) and document changes. · Support color checks, gloss testing, and film build measurements. · Clearly label, contain, and segregate suspect or rejected parts in accordance with company protocols. · Any other project deemed necessary by Department head(s). · Maintain compliance of IATF 16949 / ISO 9001 / ISO 14001. Follows all safety, housekeeping and company policies and procedures. Coordinates and maintains all job responsibilities in a continuous and flexible manner and performs other related duties and job assignments as required. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Proven experience in quality inspection within a manufacturing or assembly environment. Ability to perform color evaluations for the Farnsworth-Munsell 100 Hue Test. Comfortable using Microsoft Office Suite (Word, Excel, Outlook, etc.). Strong attention to detail and organizational skills. Ability to work 12-hour shifts and weekends based on production demands. Strong verbal communication skills to engage with diverse teams; people oriented. Ability to interpret and enforce quality standards and work instructions. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, and walk. Occasionally bend, squat, reach, twist/turn and lift up to 10 lbs. Specific vision abilities required by this job include ability to adjust focus. Powered by ExactHire:149476

Job Description Quality Control Technician- PQC SEG Solar is expanding its horizons in the solar industry and seeking candidates to join our Quality Control Department. If you're passionate about contributing to a greener world, eager to grow professionally, and thrive in a collaborative environment, this opportunity is for you! As a Quality Control team member, responsibilities include: Performing visual inspections of solar modules at various stages of production Identifying and recording defects such as cracks, scratches, contamination, or misalignment Conducting EL image review and ensuring proper documentation Checking labeling, barcode placement, and ensuring traceability compliance Verifying proper application of materials (e.g., POE, EVA, backsheet, junction box) Ensuring that standard operating procedures (SOPs) and quality standards are followed Communicating defects and abnormalities to engineers or supervisors for corrective actions Completing inspection reports accurately and on time Collaborating with production staff to support continuous quality improvement Maintaining cleanliness and organization of the inspection station Following safety protocols and company policies at all times Other duties within the department, as needed Qualifications: High School Diploma or equivalent; previous experience in quality control, quality inspection, and in a manufacturing environment, a plus. Strong attention to detail and organizational skills. Strong communication (written and verbal), organizational, and interpersonal. Ability to multitask effectively and deliver under tight deadlines. Able to use Microsoft Office (Word, Excel, etc.) Able to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Able to work independently and in a team setting. Able to stand for long periods of time. Attention to detail and accuracy. Good manual dexterity and hand - eye coordination. Job Type: Full-time Physical Setting: Onsite Schedule: Ability to work 8-12-hour shifts; ability to work overtime and weekends (Saturdays) Ability to commute: Reliable transportation Benefits: 401(k) Health Insurance Vision and Dental Dental insurance Flexible spending account Paid Time Off Holiday Pay

1st Shift 6AM to 2:30PM M-F *NO Rotating Seeks: Experienced Quality Control for Computer Electronics **INTERVIEW Call ************ M-F 8am to 5pm **Friendly Company *TOUR *HVAC Environment YOUR FREE Benefits Paid By Company SOME QC Electronics Experience Preferred Knowledge of AS9102, AS9100 and Internal Auditing Preferred Tools: Computer / Handheld Bar Code Scanners / Tracking Inventory / Barcode Labeling Background and H.S. Diploma or GED is Required Shorts, Jeans, T-Shorts, Full Shoe (NO Steel Toes) **Have Experience CALL to Interview M-F 8am to 5pm ************

About Us: The Motherson Group is one of the 15 largest full system solutions providers to the global automotive industry, serving multiple further industries, such as rolling stock, aerospace, medical, IT, and logistics, with over 190,000 employees across 44 countries worldwide. About The Job: Apply customer & SAS quality standards on shop floor through inspections, instructions & training Support & maintain test planning and checking procedures Gauge checks Support release of series assembly & conduct product audits with documentation Evaluate scrap parts and issue Quality Alerts for customer complaints Authorize block/release of production parts & manage emergency data Follow work, test & measuring instructions; handle tools accurately Solve quality issues using ACT QRCI methods Update defect code list & maintain control plans Liaise with production team on quality issues Communicate with customers/suppliers on complaints Attend risk management/P-FMEA meetings & workstation rating Qualifications: Possibly experience in the automotive industry; potentially also 1st time experience 3-5 years of experience in process quality area Product knowledge Process knowledge Control plan Technical undestanding Problem-solving experience & methodologies What We Offer: Competitive Pay Medical Benefits 401K Paid Time Off

Job Description Quality Inspector at ARE-Massillon OH Plant (1st Shift 5:00am - 3:30pm Monday-Thursday) About Real Truck RealTruck is the premier manufacturer and digital destination of accessories for truck, Jeep , Bronco and off-road enthusiasts around the world. Globally headquartered in Ann Arbor, Michigan, Real Truck's 5,000+ associates operate from 72 facilities across four continents. RealTruck's industry leading product portfolio, which includes the Husky Liners total vehicle protection brand, boasts over 850 patents and pending applications. The company's omni-channel retail approach delivers a seamless consumer experience online at RealTruck.com, as well as through its 12,000+ dealer network and automotive (OEM) partnerships. For more information, visit ****************** Pay and Benefits: RealTruck offers competitive pay and the opportunity for an annual increase, based on job performance A 401k savings program with a company match to plan and save for your retirement 10 paid holidays and paid time off to ensure time with your family and a work/life balance Discounts on great RealTruck products for you, your family, and friends We reward great talent referring great talent with our Employee Referral Bonus program We are an equal opportunity employer with a commitment to diversity. All individuals, regardless of personal characteristics, are encouraged to apply What does your career journey look like? Do you have a high school diploma or equivalent and have a commitment to working safely? We will teach you everything you need to know. Be rewarded for good attendance and hard work with advancement opportunities (and pay raises) through promotions and career development opportunities over time. Primary Responsibilities: Ensures product compliance with standards at multiple stations throughout the shop. Verifies unit meets product specification sheet standards. Identify parts and location placement of components. Completely check entire unit for quality issues per documented best practices (work instructions). Document each unit into the data tracking database. Completes additional tasks as assigned. Minimum Qualifications: High School Diploma/GED or equivalent preferred. Proficient oral and written communication skills. Basic computer and math skills. Basic Expectations: Ability to follow work instructions. Safely operate a power industrial truck and/or aerial work platform Maintain a valid power industrial truck license. Ability to learn and understand the manufacturing process. Adhere with all company policies, procedures and trainings. Maintains a safe, clean work environment; address any unsafe conditions or behaviors with a supervisor. Completes all required records, reports, and forms in a neat, accurate and timely fashion. Seeks to always improve materials processes, product quality, and worker safety. What's next? Please take a moment to complete our online application. Check us out at ******************** About RealTruck RealTruck is the premier manufacturer and digital destination of accessories for truck, Jeep , Bronco and off-road enthusiasts around the world. Globally headquartered in Ann Arbor, Michigan, RealTruck's 6,000+ associates operate from 35+ facilities across four continents. RealTruck's industry leading product portfolio, which includes the Husky Liners total vehicle protection brand, boasts over 1,000 patents and pending applications. The company's omni-channel retail approach delivers a seamless consumer experience online at RealTruck.com, as well as through its 12,000+ dealer network and automotive (OEM) partnerships.

Join our Team! Millat Industries, a family-owned manufacturing company celebrating 60 years of success, is seeking a Quality Technician (1 st Shift) at our Kettering location. Are you a detail-driven person who wants to make a real difference at a stable, innovative, and rapidly growing precision machining company? If so, we want to meet you! Associate Benefits: Pay negotiable with experience! This position will start through a Staffing Agency for the first 90 Days Weekly paychecks Attendance Bonus and Bi-annual bonuses Medical, dental, and vision coverage Company-paid life insurance & disability plans Holiday pay & paid time off 401k with company match Heating and air conditioning throughout the facility Employee Appreciation: Catered Lunches, Gift Cards, Drawings Events: Holiday Parties, Golf Outing, Fishing Tournament Tuition reimbursement (up to 100%) Wellness coaching Your Responsibilities: Operate multiple CMM's programmed with PC-DMIS Use hand gages (calipers, micrometers, height stands, etc.) to inspect manufactured products Assist engineering / quality departments by gathering and analyzing data for continuous improvement activities Establish a positive rapport and excellent communication with production leads and associates Meet customer delivery requirements by utilizing time effectively Utilize lean manufacturing techniques in daily activities Follow and Enforce quality procedures throughout entire shop Qualifications: Strong communication skills Strong computer skills Ability to stand, walk, push, pull, reach overhead, and bend to floor Ability to exert between 10 and 50 pounds on an occasional basis Quality oriented & conscious Always adheres to Company safety policies Reliable with excellent attendance record Why Join Millat Industries? Stability and Legacy - 60 years in business, third-generation leadership, and turnover less than half the national manufacturing benchmark. Innovation and Growth - Work with teams that embrace new technology, continuous improvement, and diverse manufacturing projects for a diverse customer base. Values-Driven Culture - Operate in a culture built on teamwork, integrity, and respect where “Everybody is Somebody.” Prominent Customers - Support global OEMs like Honda, GE Aerospace, and Trimble Navigation. Schedule - Approximately 40 hours per week, core hours 7:00AM - 3:30PM, Monday-Friday. Occasional overtime on Saturdays

Join our Team! Millat Industries, a family-owned manufacturing company celebrating 60 years of success, is seeking a Calibration/Quality Technician (1 st Shift) at our Kettering location. Are you a detail-driven person who wants to make a real difference at a stable, innovative, and rapidly growing precision machining company? If so, we want to meet you! Associate Benefits: Pay negotiable with experience! Weekly paychecks Attendance Bonus and Bi-annual bonuses Medical, dental, and vision coverage Company-paid life insurance & disability plans Holiday pay & paid time off 401k with company match Heating and air conditioning throughout the facility Employee Appreciation: Catered Lunches, Gift Cards, Drawings Events: Holiday Parties, Golf Outing, Fishing Tournament Tuition reimbursement (up to 100%) Wellness coaching Your Responsibilities: Responsible for calibration activities of all gages, including all associate-owned gages. Maintain the calibration schedule ensuring that all inspection equipment is calibrated on time and in good working order. Maintain all gage certifications and calibration records, ensuring that they are up to date, efficient, and accurate at all times. Schedule outside source calibrations, maintenance, and repairs of all appropriate inspection equipment (CMMs, electronic gages, comparators, etc.). Troubleshoot gaging issues and concerns with cross functional teams. Support the Quality, Engineering, and Manufacturing Teams with gage selection and conceptualization. Manage the Request for Quote (RFQ) process for new gages. Assist in Measurement System Analysis including Gage R&Rs and Gage Correlation Studies. Support audits by gathering the required information. Observe and promote company standards and policies on safety, quality, and productivity. Support and participate in customer, regulatory, and internal audits as needed when gage calibration is audited. Qualifications: Good math skills Good understanding of blueprint reading and GD&T Be able to use calipers, micrometers, comparator, etc. Be able to use or learn to use a CMM US Citizen (able to meet ITAR/EAR requirements) Strong communication skills Strong computer skills (Word, Excel, Visio, Access, PowerPoint, Outlook) Why Join Millat Industries? Stability and Legacy - 60 years in business, third-generation leadership, and turnover less than half the national manufacturing benchmark. Innovation and Growth - Work with teams that embrace new technology, continuous improvement, and diverse manufacturing projects for a diverse customer base. Values-Driven Culture - Operate in a culture built on teamwork, integrity, and respect where “Everybody is Somebody.” Prominent Customers - Support global OEMs like Honda, GE Aerospace, and Trimble Navigation. Schedule - Approximately 45 hours per week, core hours 7:00AM - 4:30PM, Monday-Friday.

Battle Motors prides itself on delivering efficient, effective solutions for the heavy-duty work truck industry. With the evolution of our new EV (Electric Vehicle) technology, we are growing faster than ever. At Battle Motors, we believe the most fulfilling place to work is where extraordinary people collaborate to solve difficult problems. We're currently searching for a Quality Technician to lead our Systems team and help us grow and scale and continue our tradition of success POSITION OVERVIEW The Quality Technician is responsible for performing routine production inspections and facilitating root cause analyses to ensure products that do not meet the specifications are distributed. ROLE AND RESPONSIBILITIES Test chassis components and drive to evaluate the drive train, steering and other mechanical systems Complete all paperwork for the inspection and be able to further explain defects identified during testing Conduct in-process inspections of trucks as they are coming down the assembly line Perform inspection on production units as they are finished in production Guide team to cover all production quality inspection demands Collaborate with other departments to facilitate material timing and escalation Facilitate problem solving activities, including root cause analysis exercises Identify systematic issues inside the production process and facilitate solutions and process improvements accordingly Retrieve Engineering drawings for review and use Recognize the Quality Management System in place at BM and participate in the processes and procedures of the QMS Other duties as assigned This position will adhere to the Battle Motors Environmental Health and Safety Program by following all safety rules, procedures, practices, training, and safe use of equipment; this includes use of personal protective equipment (PPE) as required. This individual will work in a way that stresses the importance of preventing injury, accidents, or illnesses to themselves or co-workers by correcting or reporting unsafe situations, incidents, or occurrences to their Supervisor immediately. Battle Motors is an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate on the basis of race, color, religion, age, national origin, or any other status protected under federal, state, or local law.