Welder jobs at Global Finishing Solutions

Domtar is a leading producer of pulp, paper, packaging, tissue and wood products. Through our focus on safety and sustainability, as well as our commitment to operational excellence and our network of facilities across Canada and the United States, Domtar delivers high-quality and cost-effective products to customers around the world. Our workforce is comprised of 14,000 talented and hardworking individuals. We are proud to offer competitive compensation, a supportive working environment, rewarding career paths and plenty of opportunities for learning and growth. The location in Nekoosa, (Wisconsin, United States), is seeking talent to fill the position of Welder Apprentice. This job is full-time permanent. Key Responsibilities: * Adhere to employer safety practices and procedures. * Identify and interpret blueprints, specifications, diagrams, and schematics. * Perform welds using all processes, positions, and material available, according to prescribed techniques and industry standards. * Weld fabricated components of carbon steel, aluminum, stainless steel, cast iron and perform welds in all positions -flat, horizontal, vertical up and down. * Produce precision fabricated parts and assemblies according to specifications. * Work in conjunction with other crews and lead persons. Required Qualifications: * Apprentices must meet established test standards and have a strong work record, with exceptional safety and attendance records. * Prior experience with metal fabrication. * Knowledge of manual and mechanical welding techniques, including TIG, MIG, GTAW, stick and wire feed. * Solid computer skills and experience with electronic work orders. * Respond quickly to priority changes, work well under pressure, and perform quality work in a safe and efficient manner. Recommended Qualifications: * Experience in the Pulp and Paper industry will be considered an asset. * Completion of an accredited welder's training program. Must be willing to meet the following requirements: * Available to work varying hours that may include shift, weekends, and holidays. * Ability to work scheduled and unscheduled overtime and respond to emergency call-ins. * Pass pre-employment background check and drug screen. * Wear the required personal protective equipment including being respirator qualified. * Complete standard Red Cross First Aid and CPR courses during the first year of apprenticeship and maintain such certification throughout career. * Work in industrial conditions (i.e., warm/hot, dusty/dirty, around hazardous chemicals, noise, and heavy machinery or working at heights with proper safety training and safety protection) You will be required to successfully complete a selection process that could include interviews, an employment background check, a pre-employment drug and alcohol screen, reference verifications, aptitude tests (for some positions), and a fitness-for-duty test (for some positions). Domtar is an equal-opportunity employer. Qualified applicants will be considered without regard to age, race, color, sex (including gender identity or expression, sexual orientation, and pregnancy), marital status, religion, national origin, genetic information, disability, or veteran status. We are also committed to ensuring reasonable accommodations for individuals protected by Section 503 of the Rehabilitation Act of 1974, and Title I of the Americans with Disability Act of 1990. Once your application has been submitted, you will receive a confirmation email. If you are selected to interview, you will be contacted by a member of our Human Resources team. To learn more about our company, consult the Domtar Company Web Site and follow us on LinkedIn, Instagram and Twitter. Nearest Major Market: Wausau

Metalcraft of Mayville Metalcraft of Mayville is an Equal Opportunity Employer:Minorities/females/veterans/individuals with disabilities/sexual orientation/gender identity Welder (Beaver Dam) US-WI-Beaver Dam Type: Regular Full-Time # of Openings: 2 Category: Manufacturing Metalcraft of Mayville (Beaver Dam) Overview Our Beaver Dam facility is looking for Welder's who are primarily responsible for operating one or more weld machines to fabricate metal parts or assemblies to specifications applying to basic knowledge of welding theory on production basis. Currently we are on mandatory overtime 2nd shift: 2:30p to 12:00a M - F 3rd shift: Sunday though Thursday 9p to 6a Responsibilities Follow WPS weld standards. Inspects and measures machined work pieces to verify conformances to specifications. Moves machine controls and guides to adjust machine. Unload welded parts from robotic welder and place on appropriate containers. Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding. Perform basic MIG, TIG and aluminum welding techniques as needed. Examines finished work pieces to verify conformance with specifications according to operator inspection sheet, quality control plans and/or customer notes using instruments such as gauges. Perform prescribed preventative maintenance on equipment and machines. Maintains the work area and equipment in a clean and orderly condition and follows prescribed safety regulations. Ensure compliance with corporate and plant safety standards. Other duties as assigned. Qualifications Experience in manual and robotic weld is desired Successful completion of an internal welding test. Previous knowledge of fixtures and weld set up parameters (amps, volts, etc.) Basic understanding of computers and ability to perform computer functions as they pertain to the job. Ability to read and interpret documents such as blueprints, welding symbols, operating and maintenance instructions and procedure manuals. Demonstrated detail orientation, self motivation skills and ability to multi-task Demonstrated ability to communicate effectively in both verbal and written formats Must have excellent written and verbal communication skills. Competent at basic dimensional measuring and able to quickly learn the use of precision measurement tools. Demonstrated competency in basic shop math. Ability to work with various types of metal forming constraints with guidance. Previous experience with overhead crane use is desired. Demonstrated ability to effectively implement or respond to change. Work in an efficient and timely manner Aptitude to take orders and execute the same efficiently Demonstrated detail orientation, self motivation skills and ability to multi-task. Compensation details: 7.24-7.25 Yearly Salary PI7d9d9ff0d4bb-31181-39211546

Job Summary: The Welder plays a critical role in ensuring that product components are maintaining quality standards. The main function is joining metal components by applying appropriate welding techniques as defined by the blue print, maintaining prescribed quality standards via MIG technique or CNC Robot. Essential Duties: Welds components with welding equipment as specified by procedures, layouts, blueprints, diagrams, work orders, or oral instructions. Welds range from simple tacks to complex welds, performed in varying positions. Positions and clamps workpieces together or assemble them in jig or fixtures. Adjusts and monitors amperage, voltage, slope, and pulse, as specified. Measures dimensions, using measuring instruments such as micrometers, calipers, and dial indicators, or check fixture Manually guides electrode or gun along the joint weld line, maintaining length of arc and travel speed to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle. Visually examines and measures welds using weld gauges to determine weld acceptability based on specified tolerances. Selects torch, torch tip, and filler rod, per Weld Procedure Specifications (WPS). Trim, sand, and drill parts, fit and deburr product as required. Maintains equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs. Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs. · Documents actions by accurately completing production and quality logs. Assists engineering in creating, implementing, and maintaining of Weld Procedure Specifications defining process, set-up, and operation. Knowledge, Skills, and Abilities: Ability to read blueprints for geometric and tolerance details, use digital or analog measuring devices such as caliper, micrometer, angle gauge, weld gauge, etc. Good math, counting, part number recognition and computer skills, and strong mechanical aptitude. Ability to work with minimal supervision. Ability to read and communicate fluently in English. Ability to work well with other employees and take direction from Coordinators and Managers. Ability to be forklift and pallet truck certified. Physical Demands: While performing the duties of this job, the employee is regularly required to talk and hear; and use hands to manipulate objects or controls. The employee will regularly be working inside the manufacturing plant and is required to walk, stand, bend, and lift up to 50 pounds for extended periods of time. This position will also stoop, bend or reach above the shoulders. Specific conditions of this job include are typical of frequent and continuous computer-based work, which will require periods of sitting, ability to adjust vision and focus. Requirements: High School Diploma or GED 3 years of production welding experience OR Welding Certificate from an accredited Technical School Forklift Certified, preferred 1 year of Robotic welding/programming experience, preferred PIe**********2-31181-38558524

Metalcraft of Mayville Metalcraft of Mayville is an Equal Opportunity Employer:Minorities/females/veterans/individuals with disabilities/sexual orientation/gender identity Welders - 2nd or 3rd Shift (West Bend) US-WI-West Bend Type: Regular Full-Time # of Openings: 6 Category: Manufacturing Metalcraft of Mayville, Inc (West Bend) Overview Reports to Shift Supervisor and operates one or more welding machine or industrial robots to fabricate metal parts or assemblies to specifications applying basic knowledge of welding theory on production basis by performing the job duties. Responsibilities Lifts work piece manually or using hoist and secures work piece in fixture or loads automatic feeding device. Calculates and sets controls to regulate machine factors, such as wire feed speed, amperage, polarity, type of gas, and type of weld rod. Starts machine, engages feed, and observes operation. Inspects and measures machined work pieces to verify conformance to specifications. Moves machine controls and guides to adjust machine. Unload welded frames from robotic welder and place on appropriate containers. Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding. Remove rough spots from work pieces, using portable grinders, hand files, or scrapers. Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. Weld components in flat, vertical, or overhead positions. Replaces worn machine accessories such as cutting tools or brushes. Files, sands, or shapes machined parts.. Maintains accurate counts of parts; attaches labels or tags to finished part containers identifying customer, part number, quantity and shop order information. Performs basic MIG and TIG welding techniques as needed. Maintains company quality, efficiency, and productivity standards. Reads job specifications (e.g. blueprints, quality control plans and/or traveler notes) to determine type of welding and material requirements. Uses equipment and supplies to perform work in accordance with operational standards. Examines finished work pieces to verify conformance with specifications according to operator inspection sheet, quality control plans and/or customer notes using instruments such as gauges. Reports defective materials or questionable conditions to the Robotic Welding Manager. Performs prescribed preventative maintenance on equipment and machines. Maintains the work area and equipment in a clean and orderly condition and follows prescribed safety regulations. May perform other related duties or work at different workstations as production needs require. other duties as assigned Qualifications High School diploma or general education degree (GED); FANUC Robotic Certification is desired Certificate or degree in welding is preferred; At least one year welding experience Or equivalent combination of education and experience. Successful completion of an internal welding test Knowledge of welding equipment and tools, including their design, uses, repair, and maintenance Knowledge of basic math skills Ability to read and interpret documents like blueprints, welding symbols safety rules, operating and maintenance instructions, and procedure manuals. Ability to communicate with co-workers, supervisors and vendors. Must be dependable Metalcraft of Mayville is an Equal Opportunity Employer: Minorities/females/veterans/individuals with disabilities/sexual orientation/gender identity PM17 Compensation details: 7.24-7.25 Hourly Wage PI**********a3-31181-39185895

Job Description As a pioneering leader in advanced separation technologies, Komline has established a global reputation for engineering excellence. Through our combination of innovative design, cutting-edge manufacturing capabilities, and decades of industry experience, we consistently deliver the highest quality equipment from our integrated manufacturing facilities. Serving our core markets of Water & Process, Agricultural & Renewables, and Industrials, we pride ourselves on providing comprehensive separation solutions precisely tailored to our clients' requirements. With a strong track record of strategic growth and acquisitions, Komline continues to expand its solution portfolio and technical capabilities while maintaining our commitment to innovation and customer satisfaction. As part of Komline, Heron Innovators manufactures innovative Suspended Air Flotation (SAF ) water and wastewater treatment solutions. Through customized skid-mounted or standalone SAF systems, Heron Innovators delivers sustainable and cost-effective solutions that outperform traditional wastewater treatment methods. The Fabricator II will perform a diverse mix of fabrication and assembly work that encompasses the full design, engineering, integration, and build processes. Using equipment such as CNC plasma, grinders, bandsaws, and MIG/TIG welders, they'll read fabrication drawings and operate forklifts and other standard equipment. Role and Responsibilities Proactively identify areas of opportunity and seek solutions through proper resources Fabricate and assemble in accordance with production guidelines Qualifications High School Diploma, GED, or sufficient related work experience Experience in various field erecting and installation of miscellaneous equipment Ability to read fabrication drawings Operate forklifts and other standard equipment Maintain an organized and clean, safe work area Ability to lift at least 50 lbs. Ability to work full-time with flexibility for occasional overtime on the weekends Nice To Have Certified Welder certification Equal Opportunity Statement: Komline is an EEO employer - M/F/Vets/Disabled

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. \ Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter Powered by JazzHR sZqQ2r6utq

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. \ Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter Powered by JazzHR enn RGX4KXh

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. \ Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter Powered by JazzHR ETMQnDsv4f

This is a general description of the essential job functions and is not intended to be an employment contract. Eastern Shipbuilding Group, Inc. maintains its status as an at-will employer. Position requirements, skills, and abilities included in this have been determined to be the minimal standards required to successfully perform the position. Eastern Shipbuilding Group Inc. reserves the right to increase, waive or reduce these minimal standards. In no instance, however, should the duties, responsibilities, and requirements described be interpreted as all-inclusive. All employees of Eastern Shipbuilding Group, Inc. are expected to perform the duties as assigned by Eastern Shipbuilding Group, Inc., supervisory/management personnel, regardless of job title or routine job duties. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. To perform this job successfully, an individual is expected to be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability expected. In accordance with the Americans with Disabilities Act, reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. However, no accommodation will be made which may pose serious health or safety risks to the employee or others or which imposes undue hardship on Eastern Shipbuilding. POSITION SUMMARY Supervise and coordinate activities of workers engaged in the installation and assembly of piping for various systems. Work with other crafts as instructed by supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES MAY INCLUDE THE FOLLOWING: Because Eastern Shipbuilding is continually growing to meet the needs of our customers, the essential duties and responsibilities may be different than described. Regular attendance at work and the ability to work flexible hours, including overtime, weekends and holidays. Comply with company, Federal, State, and local safety, ethics, and environmental rules, regulations and policies while performing duties. Assign work on multiple assignments during a workday and monitor progress onboard marine vessels. Monitor your work performances and productivity. Assist in meeting production goals. Manage employees and plan ahead to have their crew work safe. Identify and correct poor welding practices that generate excessive rework and scrap. Flag cranes, figure weights, and rig all types of lifts. Work with minimal supervision. Inspect welds for compliance with American Bureau of Shipping (ABS) specifications. Assist in troubleshooting piping systems and conduct diagnosis to identify and fix pipe problems. Ensure that all welding inspection tasks are performed. Ability to input time on a computer. Have excellent communication skills. Able to set up and execute QA call outs. SUPERVISORY RESPONSIBILITIES Directly and/or indirectly supervise and/or train subordinates assigned to their crew. REQUIREMENTS Education/Experience: High school diploma or GED equivalence plus one to three years' previous shipyard experience required. One to three years supervisory experience desired. An equivalent combination of education and experience may be considered. One to three years experience welding on carbon steel, stainless steel, and/or aluminum in shipbuilding industry required. Requires knowledge of ship terminology, safety, Occupational Safety and Health Administration (OSHA), and ABS regulations. Must be able to manage a crew of individuals to get the job done efficiently, effectively, and safely. Must pass welding tests to be ABS Certified. Skills: Ability to read and interpret blue prints. Ability to read and comprehend written, oral, or diagram forms or plans. Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Knowledge of safe operation and use of hand and power tools. Ability to effectively present information and respond to questions from supervisors and employees. Ability to add, subtract, multiply, and divide in all units of measure. Ability to read a tape measure. Behavioral Attributes: Integrity, ethics, flexibility/adaptability, initiative, interpersonal skills, attention to detail, safety conscious, and multi-tasking. Maintain the confidential integrity of details pertaining to Eastern Shipbuilding Group. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to communicate. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the workday. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The employee must be physically and medically qualified to wear all required personal protective equipment, as prescribed under Occupational Safety and Health Administration (OSHA) standards. The employee must be able to work above ground at heights of a minimum of 50 feet aloft and/or working from scaffolding and/or man-lifts while working with machinery; in confined spaces and withstand extreme heat and cold in an outside climate or confined space. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee may be exposed to the risk of electrical shock, moving mechanical parts, vibration, fumes, airborne particles, toxic or caustic chemicals, continual loud noise, and other hazards found in a heavy industrial shipyard environment. Rigorous compliance with safety procedures, policies, and personal safety equipment requirements is therefore mandatory. We are equal opportunity/affirmative action employers, committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, disability, or protected veteran status, or any other protected characteristic under state or local law.

This is a general description of the essential job functions and is not intended to be an employment contract. Eastern Shipbuilding Group, Inc. maintains its status as an at-will employer. Position requirements, skills, and abilities included in this have been determined to be the minimal standards required to successfully perform the position. Eastern Shipbuilding Group Inc. reserves the right to increase, waive or reduce these minimal standards. In no instance, however, should the duties, responsibilities, and requirements described be interpreted as all-inclusive. All employees of Eastern Shipbuilding Group, Inc. are expected to perform the duties as assigned by Eastern Shipbuilding Group, Inc., supervisory/management personnel, regardless of job title or routine job duties. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. To perform this job successfully, an individual is expected to be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability expected. In accordance with the Americans with Disabilities Act, reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. However, no accommodation will be made which may pose serious health or safety risks to the employee or others or which imposes undue hardship on Eastern Shipbuilding. POSITION SUMMARY Plan, layout, weld, install, test and repair all types of pipe and similar tubular products in accordance with plans, specifications, codes, and industry standards. Work with other crafts as instructed by supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES MAY INCLUDE THE FOLLOWING: Because Eastern Shipbuilding is continually growing to meet the needs of our customers; the essential duties and responsibilities may be different than described. Comply with Company, federal, state, and local safety, ethics, and environmental rules, regulations, and policies while performing duties. Regular attendance at work and the ability to work flexible hours, including overtime, weekends, and holidays. Review layouts, blueprints, diagrams, or work orders in preparation for welding or cutting metal components. Complete welds to the specified standards using appropriate equipment and materials. Install and verify the operation of high-pressure steel pipes and fittings. Repair and replace any damaged pipe; fabricate and install metal fittings; install supports, valves, and other control equipment; bolt, clamp, or weld parts to secure in position for welding. Use appropriate hand and power tools to properly measure, cut, assemble, weld, and install all types of pipes and/ or similar tubular products. Test installed piping systems and install other related items in accordance with the applicable plans and specifications. Set up equipment and weld parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. Troubleshoot equipment. Produce high-quality welds, including watertight penetrations with a variety of materials including weld steel, stainless, and aluminum. Work with minimal supervision. Perform other duties as assigned. Successfully pass a 6G (6” pipe coupon) Stainless Steel, CUNI, & Aluminum - TIG. Successfully pass a 6G (6” weld coupon) Carbon Stell - root and cap. SUPERVISORY RESPONSIBILITIES May indirectly supervise and/or train subordinates. REQUIREMENTS Education/ Experience: High school diploma or GED equivalence plus three to five years of pipe welding experience desired. An equivalent combination of education and experience may be considered. Requires working knowledge of equipment, work processes, and techniques used in measuring fitting and welding steel. Requires x-ray pipe welding experience with the ability to weld pipe in all positions and mirror weld. Requires knowledge of welding symbols, ship terminology, Occupational Safety and Health Administration (OSHA), and American Bureau of Shipbuilding (ABS) standards. Must pass SMAW 6G Pipe Test to become ABS Certified. Skills: Ability to read and comprehend written, verbal, or diagram forms or plans. Ability to apply common sense understanding to carry out written and verbal instructions. Ability to read and understand blueprints. Ability to effectively present information and respond to questions from supervisors and employees. Knowledge of safe operation and use of hand and power tools. Ability to add, subtract, multiply, and divide into all units of measure. Ability to read a tape measure. Behavioral Attributes: Integrity, ethics, flexibility/adaptability, initiative, interpersonal skills, attention to detail, safety conscious, and multitasking. Maintain the confidential integrity of details pertaining to Eastern Shipbuilding Group. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to communicate. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the workday. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. The employee must be physically and medically qualified to wear all required personal protective equipment, as prescribed under Occupational Safety and Health Administration (OSHA) standards. The employee must be able to work above ground at heights of a minimum of 50 feet aloft and/or working from scaffolding and/or man-lifts while working with machinery; in confined spaces and withstanding extreme heat and cold in an outside climate or confined space. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee may be exposed to the risk of electrical shock, moving mechanical parts, vibration, fumes, airborne particles, toxic or caustic chemicals, continual loud noise, and other hazards found in a heavy industrial shipyard environment. Rigorous compliance with safety procedures, policies, and personal safety equipment requirements is therefore mandatory. We are equal opportunity/affirmative action employers, committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, disability, or protected veteran status, or any other protected characteristic under state or local law.

This is a general description of the essential job functions and is not intended to be an employment contract. Eastern Shipbuilding Group, Inc. maintains its status as an at-will employer. Position requirements, skills, and abilities included in this have been determined to be the minimal standards required to successfully perform the position. Eastern Shipbuilding Group Inc. reserves the right to increase, waive or reduce these minimal standards. In no instance, however, should the duties, responsibilities, and requirements described be interpreted as all-inclusive. All employees of Eastern Shipbuilding Group, Inc. are expected to perform the duties as assigned by Eastern Shipbuilding Group, Inc., supervisory/management personnel, regardless of job title or routine job duties. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. To perform this job successfully, an individual is expected to be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability expected. In accordance with the Americans with Disabilities Act, reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. However, no accommodation will be made which may pose serious health or safety risks to the employee or others or which imposes undue hardship on Eastern Shipbuilding. POSITION SUMMARY Plan, layout, weld, install, test and repair all types of pipe and similar tubular products in accordance with plans, specifications, codes, and industry standards. Work with other crafts as instructed by supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES MAY INCLUDE THE FOLLOWING: Because Eastern Shipbuilding is continually growing to meet the needs of our customers; the essential duties and responsibilities may be different than described. Comply with Company, federal, state, and local safety, ethics, and environmental rules, regulations, and policies while performing duties. Regular attendance at work and the ability to work flexible hours, including overtime, weekends, and holidays. Review layouts, blueprints, diagrams, or work orders in preparation for welding or cutting metal components. Complete welds to the specified standards using appropriate equipment and materials. Install and verify the operation of high-pressure steel pipes and fittings. Repair and replace any damaged pipe; fabricate and install metal fittings; install supports, valves, and other control equipment; bolt, clamp, or weld parts to secure in position for welding. Use appropriate hand and power tools to properly measure, cut, assemble, weld, and install all types of pipes and/ or similar tubular products. Test installed piping systems and install other related items in accordance with the applicable plans and specifications. Set up equipment and weld parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. Troubleshoot equipment. Produce high-quality welds, including watertight penetrations with a variety of materials including weld steel, stainless, and aluminum. Work with minimal supervision. Perform other duties as assigned. Successfully pass a 6G (6” pipe coupon) Stainless Steel, CUNI, & Aluminum - TIG. Successfully pass a 6G (6” weld coupon) Carbon Stell - root and cap. SUPERVISORY RESPONSIBILITIES May indirectly supervise and/or train subordinates. REQUIREMENTS Education/ Experience: High school diploma or GED equivalence plus three to five years of pipe welding experience desired. An equivalent combination of education and experience may be considered. Requires working knowledge of equipment, work processes, and techniques used in measuring fitting and welding steel. Requires x-ray pipe welding experience with the ability to weld pipe in all positions and mirror weld. Requires knowledge of welding symbols, ship terminology, Occupational Safety and Health Administration (OSHA), and American Bureau of Shipbuilding (ABS) standards. Must pass SMAW 6G Pipe Test to become ABS Certified. Skills: Ability to read and comprehend written, verbal, or diagram forms or plans. Ability to apply common sense understanding to carry out written and verbal instructions. Ability to read and understand blueprints. Ability to effectively present information and respond to questions from supervisors and employees. Knowledge of safe operation and use of hand and power tools. Ability to add, subtract, multiply, and divide into all units of measure. Ability to read a tape measure. Behavioral Attributes: Integrity, ethics, flexibility/adaptability, initiative, interpersonal skills, attention to detail, safety conscious, and multitasking. Maintain the confidential integrity of details pertaining to Eastern Shipbuilding Group. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to communicate. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the workday. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. The employee must be physically and medically qualified to wear all required personal protective equipment, as prescribed under Occupational Safety and Health Administration (OSHA) standards. The employee must be able to work above ground at heights of a minimum of 50 feet aloft and/or working from scaffolding and/or man-lifts while working with machinery; in confined spaces and withstanding extreme heat and cold in an outside climate or confined space. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee may be exposed to the risk of electrical shock, moving mechanical parts, vibration, fumes, airborne particles, toxic or caustic chemicals, continual loud noise, and other hazards found in a heavy industrial shipyard environment. Rigorous compliance with safety procedures, policies, and personal safety equipment requirements is therefore mandatory. We are equal opportunity/affirmative action employers, committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, disability, or protected veteran status, or any other protected characteristic under state or local law.

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. \ Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter Powered by JazzHR bg FcZzNGMU

Perform Aluminum MIG Arc Welding (AMAW) on fixtures, parts and ramps. May do some TIG welding. Must be able to read blue prints, follow job orders and learn welding techniques and procedures for aluminum trailers. Will operate and maintain setups. Must recognize and be conscious of quality, tolerance and accuracy of finished trailers. Alert to visually detect obvious defects. Work is given supervision, inspection and check; instructions and guidance provided on new work, procedural variations and difficulties. Essential Duties and Responsibilities: · Reads job order and blueprint specifications. · Check the blueprint and job order before starting any operation. Refer to blueprint throughout the day. · Conserves resources by using equipment and supplies as needed to accomplish job results. · Flip the trailer, with the help of a flipper or co-worker, in order to weld the other side of the trailer. · Verifies specifications by inspecting completed component. · Responsible for the safety of the equipment he/she is using. Responsible for notifying the lead or manager, of the need for equipment repairs. · Contributes to team effort by accomplishing related results as needed. · Recognize obvious defective or damaged parts, incorrect sizes, faulty workmanship and general quality. Double check job order to finished product. · Evaluates and recommends changes in methods and procedures. · Must be able to follow directives and procedures and complete paperwork. · Work area must be maintained as clean and organized. · Work in compliance with all safety, quality, quantity and housekeeping standards in accordance with company policies. · Performs other related duties as assigned by management. · Supports all Continuous Improvement initiatives including 6S and Kaizen events. Education and/or Experience: · Aluminum welding experience is required. Must pass aluminum weld test. · Must be able to read blueprints. · Must be able to read tape measure and follow a job order. · Good verbal and written communication skills are required. Job Type: Full-time Salary: $20.00 - $24.00 per hour Benefits: 401(k) 401(k) matching Dental insurance Health insurance Health savings account Life insurance Paid time off Referral program Retirement plan Vision insurance Schedule: 10 hour shift Day shift Overtime Work Location: In person Alcom USA is proud of its diverse workforce and welcomes employees who speak one or more languages. As a necessity to safely and efficiently perform business operations, employees must be proficient in speaking and understanding English. Alcom will assess the level of fluency required on a job by job basis. Employees must be able to speak and understand English for job related communications and are otherwise welcome to speak their native or other language in the workplace. EOE

Custom Marine is Growing! We currently have an opportunity for 1st or 2nd shift TIG/MIG Stainless Steel and Aluminum Welder/ Fabricator to work in our Neenah, WI facility. Custom Marine is a leading manufacturer of highly engineered original equipment and aftermarket stainless steel exhaust headers, exhaust pipes, mufflers, and other marine and industrial components. Our products support healthcare, military, law enforcement, banking, gas stations, etc. CUSTOM MARINE OFFERS EXCELLENT BENEFITS: Clean, safe work environment $23.18 -$34.00 hour - based on experience 1st or 2nd shift 2nd Shift Premium Pay - $4.00/hour extra Health Insurance - COMPANY PAID EMPLOYEE MEDICAL PREMIUMS LOW deductible and LOW out of pocket max Dental Insurance Vision Insurance Flexible Spending Accounts (FSA) Life Insurance - COMPANY PAID Short-Term Disability - COMPANY PAID Paid Vacation TWO retirement plans (401k plan with match AND defined contribution plan) 8 paid holidays a year Tuition Reimbursement Referral rewards program Position Summary : Experience MIG and TIG Welding Stainless Steel, Aluminum and other metals to deliver a quality weld that is also aesthetically pleasing. Ability to “Walk the Cup” and be familiar with using hard automation such as plasma weld-around. Fabricate and assemble components and parts - Measure, cut, grind and shape components using varies tools. Ability to read, understand and work from blueprints, layouts, and other types of work orders/instructions. Ability to follow Quality assurance procedures and processes. Meet and maintain quality and performance expectations, including productivity, efficiency, and time management, all while maintaining a high-level attention to detail. Good communication and interpersonal skills. Must be able to read, write and speak English fluently. Maintains safe operations by adhering to safety procedures and regulations. Willingness to take on additional responsibilities and tasks as directed by management. Other duties may be assigned to accommodate the needs of the company and/or shop. Check Us Out: ******************** Join the Custom Marine Team Today! EOE Custom Marine Inc is an Equal Opportunity Employer. All qualified applicants will be considered for employment without regard of race, color, religion, sex, sexual orientation, gender identity, national origin, or status as a qualified individual with a disability or protected veteran.

This is a general description of the essential job functions and is not intended to be an employment contract. Eastern Shipbuilding Group, Inc. maintains its status as an at-will employer. Position requirements, skills, and abilities included in this have been determined to be the minimal standards required to successfully perform the position. Eastern Shipbuilding Group Inc. reserves the right to increase, waive or reduce these minimal standards. In no instance, however, should the duties, responsibilities, and requirements described be interpreted as all-inclusive. All employees of Eastern Shipbuilding Group, Inc. are expected to perform the duties as assigned by Eastern Shipbuilding Group, Inc., supervisory/management personnel, regardless of job title or routine job duties. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. To perform this job successfully, an individual is expected to be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability expected. In accordance with the Americans with Disabilities Act, reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. However, no accommodation will be made which may pose serious health or safety risks to the employee or others or which imposes undue hardship on Eastern Shipbuilding. POSITION SUMMARY Plan, layout, weld, install, test and repair all types of pipe and similar tubular products in accordance with plans, specifications, codes, and industry standards. Work with other crafts as instructed by supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES MAY INCLUDE THE FOLLOWING: Because Eastern Shipbuilding is continually growing to meet the needs of our customers, the essential duties and responsibilities may be different than described. Comply with Company, federal, state, and local safety, ethics, and environmental rules, regulations, and policies while performing duties. Regular attendance at work and the ability to work flexible hours, including overtime, weekends, and holidays. Review layouts, blueprints, diagrams, or work orders in preparation for welding or cutting metal components. Complete welds to the specified standards using appropriate equipment and materials. Install and verify operation of high-pressure steel pipes and fittings. Repair and replace any damaged pipe; fabricate and install metal fittings; install supports, valves, and other control equipment; bolt, clamp, or weld parts to secure in position for welding. Use appropriate hand and power tools to properly measure, cut, assemble, weld, and install all types of pipe and/or similar tubular products. Test installed piping systems and install other related items in accordance with the applicable plans and specifications. Set up equipment and weld parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. Troubleshoot equipment. Produce high-quality welds, including water-tight penetrations with a variety of materials including weld steel, stainless, and aluminum. Work with minimal supervision. Perform other duties as assigned. SUPERVISORY RESPONSIBILITIES: May indirectly supervise and/or train subordinates. REQUIREMENTS Experience: Three to five years' pipe welding experience desired. An equivalent combination of education and experience may be considered. Requires working knowledge of equipment, work processes, and techniques used in measuring fitting and welding steel. Requires x-ray pipe welding experience with the ability to weld pipe in all positions and mirror weld. Requires knowledge of welding symbols, ship terminology, and Occupational Safety and Health Administration (OSHA), and American Bureau of Shipbuilding (ABS) standards. Must pass SMAW 6G Pipe Test to become ABS Certified. Skills: Ability to read and comprehend written, verbal, or diagram forms or plans. Ability to apply common sense understanding to carry out written and verbal instructions. Ability to read and understand blueprints. Ability to effectively present information and respond to questions from supervisors and employees. Knowledge of the safe operation and use of hand and power tools. Ability to add, subtract, multiply, and divide into all units of measure. Ability to read a tape measure. Behavioral Attributes: Integrity, ethics, flexibility/adaptability, initiative, interpersonal skills, attention to detail, safety-conscious, and multi-tasking. Maintain the confidential integrity of details pertaining to Eastern Shipbuilding Group. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to communicate. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the workday. The employee must frequently lift and/or move up to 50 pounds. The specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. The employee must be physically and medically qualified to wear all required personal protective equipment, as prescribed under Occupational Safety and Health Administration (OSHA) standards. The employee must be able to work above ground at heights of a minimum of 50 feet aloft and/or working from scaffolding and/or man-lifts while working with machinery; in confined spaces and withstand extreme heat and cold in an outside climate or confined space. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee may be exposed to the risk of electrical shock, moving mechanical parts, vibration, fumes, airborne particles, toxic or caustic chemicals, continual loud noise, and other hazards found in a heavy industrial shipyard environment. Rigorous compliance with safety procedures, policies, and personal safety equipment requirements is therefore mandatory We are equal opportunity/affirmative action employers, committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, disability, or protected veteran status, or any other protected characteristic under state or local law.

This is a general description of the essential job functions and is not intended to be an employment contract. Eastern Shipbuilding Group, Inc. maintains its status as an at-will employer. Position requirements, skills, and abilities included in this have been determined to be the minimal standards required to successfully perform the position. Eastern Shipbuilding Group Inc. reserves the right to increase, waive or reduce these minimal standards. In no instance, however, should the duties, responsibilities, and requirements described be interpreted as all-inclusive. All employees of Eastern Shipbuilding Group, Inc. are expected to perform the duties as assigned by Eastern Shipbuilding Group, Inc., supervisory/management personnel, regardless of job title or routine job duties. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. To perform this job successfully, an individual is expected to be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability expected. In accordance with the Americans with Disabilities Act, reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. However, no accommodation will be made which may pose serious health or safety risks to the employee or others or which imposes undue hardship on Eastern Shipbuilding. POSITION SUMMARY Plan, layout, weld, install, test and repair all types of pipe and similar tubular products in accordance with plans, specifications, codes, and industry standards. Work with other crafts as instructed by supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES MAY INCLUDE THE FOLLOWING: Because Eastern Shipbuilding is continually growing to meet the needs of our customers; the essential duties and responsibilities may be different than described. * Comply with Company, federal, state, and local safety, ethics, and environmental rules, regulations, and policies while performing duties. * Regular attendance at work and the ability to work flexible hours, including overtime, weekends, and holidays. * Review layouts, blueprints, diagrams, or work orders in preparation for welding or cutting metal components. * Complete welds to the specified standards using appropriate equipment and materials. * Install and verify the operation of high-pressure steel pipes and fittings. * Repair and replace any damaged pipe; fabricate and install metal fittings; install supports, valves, and other control equipment; bolt, clamp, or weld parts to secure in position for welding. * Use appropriate hand and power tools to properly measure, cut, assemble, weld, and install all types of pipes and/ or similar tubular products. * Test installed piping systems and install other related items in accordance with the applicable plans and specifications. * Set up equipment and weld parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. * Troubleshoot equipment. * Produce high-quality welds, including watertight penetrations with a variety of materials including weld steel, stainless, and aluminum. * Work with minimal supervision. * Perform other duties as assigned. * Successfully pass a 6G (6" pipe coupon) Stainless Steel, CUNI, & Aluminum - TIG. * Successfully pass a 6G (6" weld coupon) Carbon Stell - root and cap. SUPERVISORY RESPONSIBILITIES May indirectly supervise and/or train subordinates. REQUIREMENTS Education/ Experience: High school diploma or GED equivalence plus three to five years of pipe welding experience desired. An equivalent combination of education and experience may be considered. Requires working knowledge of equipment, work processes, and techniques used in measuring fitting and welding steel. Requires x-ray pipe welding experience with the ability to weld pipe in all positions and mirror weld. Requires knowledge of welding symbols, ship terminology, Occupational Safety and Health Administration (OSHA), and American Bureau of Shipbuilding (ABS) standards. Must pass SMAW 6G Pipe Test to become ABS Certified. Skills: Ability to read and comprehend written, verbal, or diagram forms or plans. Ability to apply common sense understanding to carry out written and verbal instructions. Ability to read and understand blueprints. Ability to effectively present information and respond to questions from supervisors and employees. Knowledge of safe operation and use of hand and power tools. Ability to add, subtract, multiply, and divide into all units of measure. Ability to read a tape measure. Behavioral Attributes: Integrity, ethics, flexibility/adaptability, initiative, interpersonal skills, attention to detail, safety conscious, and multitasking. Maintain the confidential integrity of details pertaining to Eastern Shipbuilding Group. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to communicate. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the workday. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. The employee must be physically and medically qualified to wear all required personal protective equipment, as prescribed under Occupational Safety and Health Administration (OSHA) standards. The employee must be able to work above ground at heights of a minimum of 50 feet aloft and/or working from scaffolding and/or man-lifts while working with machinery; in confined spaces and withstanding extreme heat and cold in an outside climate or confined space. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee may be exposed to the risk of electrical shock, moving mechanical parts, vibration, fumes, airborne particles, toxic or caustic chemicals, continual loud noise, and other hazards found in a heavy industrial shipyard environment. Rigorous compliance with safety procedures, policies, and personal safety equipment requirements is therefore mandatory. We are equal opportunity/affirmative action employers, committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, disability, or protected veteran status, or any other protected characteristic under state or local law.

This is a general description of the essential job functions and is not intended to be an employment contract. Eastern Shipbuilding Group, Inc. maintains its status as an at-will employer. Position requirements, skills, and abilities included in this have been determined to be the minimal standards required to successfully perform the position. Eastern Shipbuilding Group Inc. reserves the right to increase, waive or reduce these minimal standards. In no instance, however, should the duties, responsibilities, and requirements described be interpreted as all-inclusive. All employees of Eastern Shipbuilding Group, Inc. are expected to perform the duties as assigned by Eastern Shipbuilding Group, Inc., supervisory/management personnel, regardless of job title or routine job duties. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. To perform this job successfully, an individual is expected to be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability expected. In accordance with the Americans with Disabilities Act, reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. However, no accommodation will be made which may pose serious health or safety risks to the employee or others or which imposes undue hardship on Eastern Shipbuilding. POSITION SUMMARY Plan, layout, weld, install, test and repair all types of pipe and similar tubular products in accordance with plans, specifications, codes, and industry standards. Work with other crafts as instructed by supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES MAY INCLUDE THE FOLLOWING: Because Eastern Shipbuilding is continually growing to meet the needs of our customers, the essential duties and responsibilities may be different than described. * Comply with Company, federal, state, and local safety, ethics, and environmental rules, regulations, and policies while performing duties. * Regular attendance at work and the ability to work flexible hours, including overtime, weekends, and holidays. * Review layouts, blueprints, diagrams, or work orders in preparation for welding or cutting metal components. * Complete welds to the specified standards using appropriate equipment and materials. * Install and verify operation of high-pressure steel pipes and fittings. * Repair and replace any damaged pipe; fabricate and install metal fittings; install supports, valves, and other control equipment; bolt, clamp, or weld parts to secure in position for welding. * Use appropriate hand and power tools to properly measure, cut, assemble, weld, and install all types of pipe and/or similar tubular products. * Test installed piping systems and install other related items in accordance with the applicable plans and specifications. * Set up equipment and weld parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. * Troubleshoot equipment. * Produce high-quality welds, including water-tight penetrations with a variety of materials including weld steel, stainless, and aluminum. * Work with minimal supervision. * Perform other duties as assigned. SUPERVISORY RESPONSIBILITIES: May indirectly supervise and/or train subordinates. REQUIREMENTS Experience: Three to five years' pipe welding experience desired. An equivalent combination of education and experience may be considered. Requires working knowledge of equipment, work processes, and techniques used in measuring fitting and welding steel. Requires x-ray pipe welding experience with the ability to weld pipe in all positions and mirror weld. Requires knowledge of welding symbols, ship terminology, and Occupational Safety and Health Administration (OSHA), and American Bureau of Shipbuilding (ABS) standards. Must pass SMAW 6G Pipe Test to become ABS Certified. Skills: Ability to read and comprehend written, verbal, or diagram forms or plans. Ability to apply common sense understanding to carry out written and verbal instructions. Ability to read and understand blueprints. Ability to effectively present information and respond to questions from supervisors and employees. Knowledge of the safe operation and use of hand and power tools. Ability to add, subtract, multiply, and divide into all units of measure. Ability to read a tape measure. Behavioral Attributes: Integrity, ethics, flexibility/adaptability, initiative, interpersonal skills, attention to detail, safety-conscious, and multi-tasking. Maintain the confidential integrity of details pertaining to Eastern Shipbuilding Group. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to communicate. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the workday. The employee must frequently lift and/or move up to 50 pounds. The specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. The employee must be physically and medically qualified to wear all required personal protective equipment, as prescribed under Occupational Safety and Health Administration (OSHA) standards. The employee must be able to work above ground at heights of a minimum of 50 feet aloft and/or working from scaffolding and/or man-lifts while working with machinery; in confined spaces and withstand extreme heat and cold in an outside climate or confined space. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee may be exposed to the risk of electrical shock, moving mechanical parts, vibration, fumes, airborne particles, toxic or caustic chemicals, continual loud noise, and other hazards found in a heavy industrial shipyard environment. Rigorous compliance with safety procedures, policies, and personal safety equipment requirements is therefore mandatory We are equal opportunity/affirmative action employers, committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, disability, or protected veteran status, or any other protected characteristic under state or local law.

Job Description Here at Alcom we believe in our mission, vision, and values. Mission: To be the most influential partner in the trailer industry. Vision: To become the market leader in innovative, quality transportation solutions through an unmatched commitment to our employees and customers. Values: Customer Focus, Integrity, Problem Solving, Teamwork The Welder is responsible for performing tasks involved in the production of bases and frames of aluminum trailers. This includes measuring, cutting, and welding of aluminum. Apply in person - 2526 W. New York Ave, Deland, Fl 32720 M-Th 6:00a - 4:30p | Friday Overtime Potential Heath Insurance Dental & Vision Insurance Short-Term & Long-Term Disability Paid Holidays and Paid Vacation Paid Life Insurance 401(K) plan with 4% match FUNCTIONS AND RESPONSIBILITIES: The Welder is responsible for performing tasks involved in the production of bases and frames of aluminum trailers. This includes measuring, cutting, and welding of aluminum. Reads and follows blueprints and work orders ensuring a quality product that meets customer demands. Welds different facets of a trailer, including but not limited to: tacking, clamping, and welding with proper bead size on bases and cages in accordance with the work order; ensures quality of welds for structural integrity. Obtains raw materials from Material Handlers. Buffs out rough edges using a hand-held power grinder. Notifies supervisor of any mechanical or material issues including but not limited to, defects in material, damage to the trailer, and deviations from work order. Ensures that finished product meets quality expectations. Strives for the highest level of quality and understands the need for continuous improvement; supports the concept of “good enough is never good enough.” Maintains a clean and safe work area; works to minimize scrap, places unused material back in appropriate area, and disposes of waste appropriately. Follows all safety procedures, wears appropriate personal protective equipment (PPE), and reports any accidents or near misses to supervisor immediately. Performs other related duties and assignments as required. Requirements: •Must be able to work quickly without sacrificing quality or safety •Must have a keen understanding of manufacturing processes. •Must be able to measure and cut accurately •Must possess the ability to creatively think and solve problems •Ability to read blueprints and work orders accurately •Ability to work in a fast- paced environment •Strong time management and organizational abilities Alcom USA is proud of its diverse workforce and welcomes employees who speak one or more languages. As a necessity to safely and efficiently perform business operations, employees must be proficient in speaking and understanding English. Alcom will assess the level of fluency required on a job by job basis. Employees must be able to speak and understand English for job related communications and are otherwise welcome to speak their native or other language in the workplace. EOE

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. \ Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter Powered by JazzHR f6yCdUDfWi