Lead Mechanical Engineer jobs at Gulfstream Aerospace

About the Company AMD is searching for a Mixed Signal Model Verification Engineer for a 1-year project (possible extension) at their beautiful office in Santa Clara, CA. This is an onsite, W2 position. About the Role We are seeking a detail-oriented mixed signal model engineer to verify behavioral models written in SystemVerilog, both logic and real number. It will involve writing constraints and stimulus for CAD tools to run equivalence check against the schematic. It is required to read and understand the mixed signal circuit schematic to debug any mismatch between behavioral model and circuit transistor-level behavior. Modification to the behavioral models to make it equivalent to the mixed signal circuit is expected. Responsibilities Extensive experience in modeling mixed signal circuits in SystemVerilog, including real number modeling Strong understanding of HDL/SPICE co-simulations Strong understanding of custom circuit schematic Strong background in analog integrated circuit design Proficiency in RTL design languages like SystemVerilog Experience with formal equivalence checking tools like ESP Qualifications Required Must Have Skills Extensive experience in modeling mixed signal circuits in SystemVerilog, including real number modeling Strong understanding of HDL/SPICE co-simulations Strong understanding of custom circuit schematic Strong background in analog integrated circuit design Proficiency in RTL design languages like SystemVerilog Experience with formal equivalence checking tools like ESP

Senior IoT Engineer (R&D) $130-150k base salary Davis, CA We're partnered with an industry leader in the utility-scale solar digitization and automation space, who are currently going through some exciting growth in their IoT and are looking for an experienced Snr IoT R&D Engineer to join their team in Davis, CA. The IoT R&D Engineer will be leading on the design, development and prototyping of IIoT products that will provide critical infrastructure for construction automation in the solar sector, and then working closely with cross-functional teams to develop integrated hardware and software systems. The role will work closely with the IoT Director to define project scopes, working with the product managers to turn requirements into technical solutions, and providing technical mentorship to junior technicians and engineers internally. Key skills & experience: Demonstrable experience as a professional in the hardware product development space, preferably in a start-up or R&D environment This is a hands-on role that will be focused ‘tinkering' with a lot of new products/ideas - would be good to have experience with RF, GPS, Vision (Cameras, Optics & Lighting), and systems integration Should have a good understanding of fabrication technologies, power delivery systems, and electrical troubleshooting techniques Looking for someone with good CAD experience Looking for someone with a broad/generalist background who has experience across the entire product development process - open to applicants from a Solar, Construction, or Industrial background This role will be working onsite in Davis, CA. Interested? Apply now or send a copy of your resume to ***************************

Join The #1 Furniture Company-Join The #1 Furniture Brand Ashley Furniture Industries, Inc. is the largest manufacturer of furniture in the world. Established in 1945, Ashley offers one of the industry's broadest product assortments to retail partners in 123 countries. Position Summary Ashley seeks a Staff AI Engineer to join Ashley Furniture and lead the technical architecture of our agentic AI platform while remaining hands-on with critical implementations. You'll define how we build autonomous AI agent systems that operate across our supply chain, manufacturing, and retail domains, setting technical standards that enable the team to ship production features rapidly and reliably. Key Responsibilities Technical Leadership & Architecture: Define the technical strategy for our agentic AI platform. Design system architectures that support complex multi-agent workflows, real-time decision making, and seamless integration across supply chain and commerce systems. Make key technology choices that impact company trajectory. Cross-Domain System Design: Architect AI systems that span Ashley Furniture's supply chain optimization, manufacturing intelligence, and retail experiences. Design unified data models and APIs that enable agents to reason across inventory, demand forecasting, production scheduling, and customer behavior. Advanced Agent Development: Build sophisticated AI agents that handle complex, multi-step reasoning across business domains. Implement advanced patterns for tool use, multi-agent coordination, and human-in-the-loop controls for enterprise deployments. Platform & Infrastructure: Lead development of our core AI platform that enables rapid deployment of new agentic workflows. Build robust foundations for prompt management, model evaluation, observability, and cost optimization across multiple LLM providers. Team & Process Leadership: Mentor engineers and establish engineering practices that enable high-velocity feature development. Lead technical discussions, architecture reviews, and cross-functional collaboration with product and business teams. Strategic Technical Decisions: Evaluate and integrate emerging AI technologies, frameworks, and methodologies. Make build-vs-buy decisions for critical infrastructure components. Drive adoption of new capabilities like Model Context Protocol and advanced reasoning patterns. Qualifications Deep AI/ML systems expertise: Extensive experience building production AI systems at scale. Deep understanding of LLM architectures, fine-tuning, prompt engineering, and agent orchestration frameworks. Experience with both traditional ML and modern LLM-based systems. Systems architecture experience: You've designed and built complex distributed systems that handle high-throughput, low-latency requirements. Experience with microservices, event-driven architectures, and real-time data processing. Domain expertise in operations: Strong understanding of business operations and data workflows. You can translate complex business requirements into scalable technical solutions and understand the operational constraints that impact system design. Technical leadership track record: Experience leading technical teams, driving architectural decisions, and establishing engineering standards. You've successfully guided teams through technical challenges and scaling decisions. Full-stack capabilities: Comfortable working across the entire technology stack from infrastructure to user interfaces. Experience with Python and cloud platforms (AWS, Azure, GCP). Advanced LLM expertise: Deep experience with LLM architectures, fine-tuning, post-training, prompt engineering, and context engineering for optimal retrieval. Experience building production systems that leverage multiple LLM providers. Vision and multimodal systems: Extensive experience with vision models, computer vision, and multimodal AI systems. Experience building generative applications such as virtual furniture placement, room visualization, and spatial understanding systems that combine visual and textual understanding. Agent integration expertise: Experience with Model Context Protocol (MCP) implementations and agent-to-agent communication patterns. Understanding of multi-agent coordination and workflow orchestration. Nice To Have Deep understanding of multi-modal AI, tool use patterns, and agentic workflow design Background in real-time optimization, scheduling, or recommendation systems Experience building AI infrastructure platforms used by other engineers Apply today and find your home at Ashley! Benefits We Offer Health, Dental, Vision, Employee Assistance Program Paid Vacation, Holidays, and Your Birthday off Generous Employee Discount on home furnishings Professional Development Opportunities Ashley Wellness Centers (location specific) and Medical Tourism Telehealth 401(k) and Profit Sharing Life Insurance Our Core Values Honesty & Integrity Passion, Drive, Discipline Continuous Improvement/Operational Excellence Dirty Fingernail Growth Focused To learn more about Ashley Furniture, our community engagement programs, environmental stewardship, and our core values, please visit our Corporate Social Responsibility information page: Corporate Social Responsibility We are an equal opportunity employer and provide a drug-free working environment. While Ashley appreciates the interest of all candidates only those meeting specific position requirements may be contacted. Principals Only.

The Senior Project Engineer is responsible for planning, developing, coordinating, and managing engineering activities for multiple construction projects. This role provides technical expertise and project oversight, ensuring that all administrative and engineering aspects align with project goals. Working closely with internal teams and external partners, the Senior Project Engineer plays a critical role in optimizing processes, ensuring regulatory compliance, and maintaining alignment between project plans and on-site execution. This position supports multiple concurrent projects while gradually taking on leadership responsibilities, with the potential for career advancement into a management role. Essential Duties and Responsibilities: · Participate in and support up to 10 concurrent projects. · Collaborate with internal teams and external partners to ensure project success. · Provide regular updates to clients on project status, timelines, and key developments. · Develop, implement, and optimize processes to improve efficiency and productivity. · Lead and mentor team members, facilitating knowledge transfer and professional growth. · Work closely with field employees to ensure alignment between project plans and on-site execution. · Monitor the work of the engineering firm, providing direction and ensuring alignment with project goals and timelines. · Assist in budgeting, scheduling, and resource allocation. · Ensure compliance with industry regulations, company policies, and safety standards. · Coordinate material procurement, supplier relationships, and quality control efforts. · Analyze data and generate reports to support informed decision-making. · Gradually take on more leadership responsibilities with the potential to transition into a management role. Requirements: · Strong problem-solving skills and the ability to work independently. · Experience working on multiple projects simultaneously. · Excellent communication, interpersonal, and leadership skills. · Ability to learn quickly and adapt to evolving responsibilities. · Strong organizational and time-management skills. Education and Experience: · Bachelor's degree in Engineering, Construction Management, or a related field. · 2-3 years of experience in construction management. · Experience with advanced reporting and analytics tools (Power BI, SQL, Python, etc.) is a plus. · Previous leadership or mentorship experience is a plus. Candidates who accept an offer of employment are required to undergo and successfully complete a pre-employment physical examination. This exam ensures that all potential employees meet the necessary health and fitness standards for the role. The examination includes a series of tests and evaluations conducted by a certified medical professional to assess overall physical health, identify any potential medical conditions that could interfere with job performance, and verify that the candidate is capable of safely performing the essential duties of the position. Completion and clearance of this physical are mandatory steps in the hiring process.

Join The #1 Furniture Company-Join The #1 Furniture Brand Ashley Furniture Industries, Inc. is the largest manufacturer of furniture in the world. Established in 1945, Ashley offers one of the industry's broadest product assortments to retail partners in 123 countries. Summary Senior AI Engineer Ashley Furniture Industries is the world's largest furniture manufacturer and a leader in furniture manufacturing, extensive global distribution, transportation, and multi-channel retail. Our core values combined with our growth values of a Culture of Leadership, Customer Centricity, and Boundaryless collaboration, drive our relentless pursuit of innovation and operational excellence. Position Summary Ashley seeks a Senior AI Engineer to join Ashley Furniture and build production-ready agentic systems that transform how we operate across our supply chain, manufacturing, and retail experiences. You'll design and ship AI agents that make autonomous decisions, optimize complex workflows, and deliver measurable business impact. This isn't about training models in isolation-you'll build complete systems that our customers and operations teams rely on daily. Key Responsibilities Build Agentic Systems: Design and implement AI agents that handle complex, multi-step workflows across various business domains. Create agents that can reason about data patterns, make autonomous decisions, and coordinate with other systems to achieve business objectives. Develop AI-Powered Solutions: Build intelligent systems that understand user preferences and business constraints. Implement MCP servers and clients that enable LLMs to interact seamlessly with various platforms and data sources. Ship Production Features: Own the full development lifecycle from prototype to production deployment. Build robust systems that handle thousands of daily interactions with proper error handling, monitoring, and human-in-the-loop controls for critical decisions. Integrate with External Systems: Design and maintain integrations with various business platforms and data sources. Build reliable data pipelines that feed real-time information to AI agents. Optimize for Performance and Scale: Ensure AI systems can handle enterprise-scale workloads with sub-second response times. Implement efficient vector search, caching strategies, and asynchronous processing for high-throughput scenarios. Qualifications Hands-on experience with modern AI frameworks: Proficiency with LangChain, LangGraph, or similar agent orchestration frameworks. Experience building RAG systems with vector databases (Pinecone, Weaviate, Chroma). Production system expertise: You understand how to build reliable, scalable systems. Experience with Python and cloud platforms (AWS, Azure, GCP). Familiarity with API design, message queues, and distributed systems. Domain knowledge: Understanding of business operations and data workflows. You can translate business requirements into technical solutions. LLM integration experience: Experience working with OpenAI, Anthropic, or other LLM APIs. Understanding of prompt engineering, context engineering for optimal retrieval, and multi-modal capabilities. Experience with fine-tuning or post-training of language models. Vision and multimodal AI expertise: Experience with vision models and multimodal systems for image recognition and generation. Familiarity with generative use cases such as virtual furniture placement, room visualization, and computer vision applications for spatial understanding. Agent integration expertise: Experience with Model Context Protocol (MCP) implementations and agent-to-agent communication patterns. Understanding of multi-agent coordination and workflow orchestration. Nice to Have Previous work on recommendation systems or personalization engines Familiarity with real-time systems and event-driven architectures Apply today and find your home at Ashley! Benefits We Offer Health, Dental, Vision, Employee Assistance Program Paid Vacation, Holidays, and Your Birthday off Generous Employee Discount on home furnishings Professional Development Opportunities Ashley Wellness Centers (location specific) and Medical Tourism Telehealth 401(k) and Profit Sharing Life Insurance Our Core Values Honesty & Integrity Passion, Drive, Discipline Continuous Improvement/Operational Excellence Dirty Fingernail Growth Focused To learn more about Ashley Furniture, our community engagement programs, environmental stewardship, and our core values, please visit our Corporate Social Responsibility information page: Corporate Social Responsibility We are an equal opportunity employer and provide a drug-free working environment. While Ashley appreciates the interest of all candidates only those meeting specific position requirements may be contacted. Principals Only.

The Senior Project Engineer is responsible for planning, developing, coordinating, and managing engineering activities for multiple construction projects. This role provides technical expertise and project oversight, ensuring that all administrative and engineering aspects align with project goals. Working closely with internal teams and external partners, the Senior Project Engineer plays a critical role in optimizing processes, ensuring regulatory compliance, and maintaining alignment between project plans and on-site execution. This position supports multiple concurrent projects while gradually taking on leadership responsibilities, with the potential for career advancement into a management role. Essential Duties and Responsibilities: · Participate in and support up to 10 concurrent projects. · Collaborate with internal teams and external partners to ensure project success. · Provide regular updates to clients on project status, timelines, and key developments. · Develop, implement, and optimize processes to improve efficiency and productivity. · Lead and mentor team members, facilitating knowledge transfer and professional growth. · Work closely with field employees to ensure alignment between project plans and on-site execution. · Monitor the work of the engineering firm, providing direction and ensuring alignment with project goals and timelines. · Assist in budgeting, scheduling, and resource allocation. · Ensure compliance with industry regulations, company policies, and safety standards. · Coordinate material procurement, supplier relationships, and quality control efforts. · Analyze data and generate reports to support informed decision-making. · Gradually take on more leadership responsibilities with the potential to transition into a management role. Requirements: · Strong problem-solving skills and the ability to work independently. · Experience working on multiple projects simultaneously. · Excellent communication, interpersonal, and leadership skills. · Ability to learn quickly and adapt to evolving responsibilities. · Strong organizational and time-management skills. Education and Experience: · Bachelor's degree in Engineering, Construction Management, or a related field. · 2-3 years of experience in construction management. · Experience with advanced reporting and analytics tools (Power BI, SQL, Python, etc.) is a plus. · Previous leadership or mentorship experience is a plus. Candidates who accept an offer of employment are required to undergo and successfully complete a pre-employment physical examination. This exam ensures that all potential employees meet the necessary health and fitness standards for the role. The examination includes a series of tests and evaluations conducted by a certified medical professional to assess overall physical health, identify any potential medical conditions that could interfere with job performance, and verify that the candidate is capable of safely performing the essential duties of the position. Completion and clearance of this physical are mandatory steps in the hiring process.

The Senior Project Engineer is responsible for planning, developing, coordinating, and managing onsite construction engineering activities for large heavy civil construction projects including mass earthwork, structural concrete, water management, and varying geo-technical components. This role provides technical expertise and project oversight, ensuring that all administrative and engineering aspects align with project goals. Working closely with internal teams and external partners, the Senior Project Engineer plays a critical role in optimizing processes, ensuring regulatory compliance, and maintaining alignment between project plans and on-site execution. This position supports large construction projects while gradually taking on leadership responsibilities, with the potential for career advancement into a management role. Essential Duties and Responsibilities: · Generate work plans, project schedules, submittal data, CAD drawings, etc. . · Track project quantities and generate project billing. Assist field personnel, Project Superintendents, Foreman, and Crews to coordinate work effectively and resolve problems. · Collaborate with internal teams and external partners to ensure project success. · Provide regular updates to clients on project status, timelines, and key developments. · Develop, implement, and optimize processes to improve efficiency and productivity. · Lead and mentor team members, facilitating knowledge transfer and professional growth. · Work closely with field employees to ensure alignment between project plans and on-site execution. · Monitor the work of the engineering consultants, providing direction and ensuring alignment with project goals and timelines. · Assist in budgeting, scheduling, and resource allocation. · Ensure compliance with industry regulations, company policies, quality control requirements and safety standards. · Coordinate material procurement, supplier relationships, and subcontractor coordination. · Analyze data and generate reports to support informed decision-making. · Gradually take on more leadership responsibilities with the potential to transition into a management role. Requirements: · Strong problem-solving skills and the ability to work independently. · Excellent communication, interpersonal, and leadership skills. · Ability to learn quickly and adapt to evolving responsibilities. · Strong organizational and time-management skills. Education and Experience: · Bachelor's degree in Engineering, Construction Management, or a related field. · 3-5 years of experience in construction management. · Experience with advanced reporting and analytics tools (Primavera, Power BI, SQL, Python, etc.) is a plus. · Previous leadership experience is a plus. · Experience with mass earthwork or water resource projects is a plus. Candidates who accept an offer of employment are required to undergo and successfully complete a pre-employment physical examination. This exam ensures that all potential employees meet the necessary health and fitness standards for the role. The examination includes a series of tests and evaluations conducted by a certified medical professional to assess overall physical health, identify any potential medical conditions that could interfere with job performance, and verify that the candidate is capable of safely performing the essential duties of the position. Completion and clearance of this physical are mandatory steps in the hiring process.

The Project Engineer in this role is responsible for planning, developing, coordinating, and managing onsite construction engineering activities for large, extensive projects in the heavy civil/power construction industry, encompassing grading, clearing, and site development. Essential Duties and Responsibilities: Track project quantities Generate project billing. Initiate and negotiate change orders. Generate CAD drawings and present solutions to owners for design problems that arise in the field. Review plan changes Assist with work plans. Assist with project schedules. Manage submittal data. Manage material purchase orders. Manage and negotiate subcontracts. Assist in division field personnel management. Assist field personnel in any capacity to handle any problems that may arise. Work with Project Superintendents, Foreman, and Crews to perform work more effectively. Attend pre-construction meetings. Requirements: Must be willing to relocate. Strong organizational skills Strong work ethic Able to multitask and work independently under pressure and tight deadlines. Education and Experience: Four-year engineering degree or equivalent technical training and related experience Excellent communication and interpersonal skills Demonstrated ability to manage a team of varied disciplines. Candidates that accept an offer of employment are required to undergo and successfully complete a pre-employment physical examination. This exam is essential to ensure that all potential employees meet the necessary health and fitness standards for the role. The examination includes a series of tests and evaluations conducted by a certified medical professional to assess overall physical health, identify any potential medical conditions that could interfere with job performance, and verify that the candidate is capable of safely performing the essential duties of the position. Completion and clearance of this physical are mandatory steps in the hiring process.

CMP Services seeks an Project Engineer I - Sustainability to support LACCD at Los Angeles Community Collage District program. Provide technical and engineering support to the Project Managers and Construction Managers. Coordinates with Architect for timely and accurate responses to requests for information. Responsible for the maintenance and distribution of current contract plans and specifications. Confirms contractor's maintenance of record drawings prior to monthly progress payments to the Contractor. Makes field checks on construction, demolition, rehabilitation, alteration addition or repair projects to determine compliance with job specifications, plans, established College standards, and Division of the State Architect (DSA) Requirements. Documents progress of construction, demolition, rehabilitation, alteration addition or repair projects, logging photographs, daily project reports and notes as required. Assists in preparing written materials including correspondence, reports, procedures, and guide lines. Logs and tracks status of project change order proposals, field orders, and approved change orders. Maintains project files and record drawings. Logs and reviews submittals for conformance to plans and specifications. Assists in coordinating and recording minutes of meetings with project stakeholders. Assists in review of submittal procedures, RFI's and monthly invoices. Performs other project support duties as directed. Required Experience: Minimum of 3 years' experience in a similar or equivalent position involved in project or construction management of commercial and/or public or educational facility construction projects with values in excess of $15M BS/BA Degree in Engineering, Architecture, Business, Construction Management or related field required. Preferred Qualifications: Experience utilizing Building Information Modeling (BIM) Experience with Leadership in Energy and Environmental Design (LEED) certified projects and/or the Collaborative for High Performing Schools (CHPS) Experience with Division of the State Architect (DSA) construction/design process

The Project Engineer in this role is responsible for planning, developing, coordinating, and managing onsite construction engineering activities for large, extensive projects in the heavy civil/power construction industry, encompassing grading, clearing, and site development. Essential Duties and Responsibilities: Track project quantities Generate project billing. Initiate and negotiate change orders. Generate CAD drawings and present solutions to owners for design problems that arise in the field. Review plan changes Assist with work plans. Assist with project schedules. Manage submittal data. Manage material purchase orders. Manage and negotiate subcontracts. Assist in division field personnel management. Assist field personnel in any capacity to handle any problems that may arise. Work with Project Superintendents, Foreman, and Crews to perform work more effectively. Attend pre-construction meetings. Requirements: Must be willing to relocate. Strong organizational skills Strong work ethic Able to multitask and work independently under pressure and tight deadlines. Education and Experience: Four-year engineering degree or equivalent technical training and related experience Excellent communication and interpersonal skills Demonstrated ability to manage a team of varied disciplines. Candidates that accept an offer of employment are required to undergo and successfully complete a pre-employment physical examination. This exam is essential to ensure that all potential employees meet the necessary health and fitness standards for the role. The examination includes a series of tests and evaluations conducted by a certified medical professional to assess overall physical health, identify any potential medical conditions that could interfere with job performance, and verify that the candidate is capable of safely performing the essential duties of the position. Completion and clearance of this physical are mandatory steps in the hiring process.

Job Posting Start Date 10-16-2025 Job Posting End Date At JetCool, a Flex company, we're at the forefront of liquid cooling innovation, delivering advanced solutions that empower our partners in AI and high-performance computing. United by a shared purpose, our teams are pushing the limits of what's possible and tackling complex challenges. A career at JetCool offers the opportunity to make a real impact by helping build smarter, more sustainable data centers. Together, we're not just advancing technology - we're redefining cooling standards to create a more sustainable tomorrow. Job Summary JETCOOL Technologies, a Flex company, is seeking a Principal Mechanical Engineer to add to our team in Littleton, MA. Join us in shaping the future of data centers while making a significant impact on sustainability. Apply now to be part of our dedicated team of engineers and thinkers! JetCool has a mission to continuously innovate next-generation cooling solutions to enable the devices that fuel a more sustainable tomorrow. JetCool designs and delivers microconvective cooling technology for high-power electronics, enabling our customers to achieve unprecedented performance and unrivaled sustainability improvements. Our technology creates a ripple effect, enabling the businesses we serve to become more sustainable, profitable, and efficient. Join us to be part of some of today's fastest growing industries, while having a positive impact on society through technology. What a typical day looks like: Lead the initial design, analysis, and optimization of complex fluid systems, including pumps, fluids, tubing, and heat exchangers, for the latest computer processing chipsets. Collaborate with customer and partner teams to integrate fluid systems into overall product designs. Conduct fluid flow simulations, analyses, and tests to ensure efficient and reliable performance of fluid systems under various operating conditions. Perform detailed calculations and analysis of fluid dynamics, pressure drops, thermal performance, and material compatibility. Develop and review engineering specifications and documentation for fluid system and heat transfer components and assemblies, ensuring compliance with industry standards and regulatory requirements. Assist in maintaining a strong best practice culture, driving additional foundational knowledge and IP through research. Identify technical gaps to advocate for research & development and lead research projects, maximizing product impact and benefit. Provide technical guidance and mentorship to junior engineers, fostering a culture of continuous learning and development. Participate in design reviews, presenting technical findings and recommendations to internal and external stakeholders. Contribute to the development of new product concepts and innovations in fluid system design, keeping abreast of industry trends and emerging technologies. Support the resolution of technical challenges and issues related to fluid systems throughout the product lifecycle. The experience we are looking to add to our team: Bachelor of Science degree in Mechanical Engineering or related field. Minimum of 7 to 10 years of post-collegiate experience, with 4+ years in designing and engineering fluid systems, preferably within the data center thermal management/cooling, automotive, medical, or nuclear industries. Minimum of 3 years working at senior or principal engineer level. Profound expertise in fluid dynamics, thermodynamics, and heat transfer, with a strong foundation in engineering principles. Ability to independently develop product concepts, performance analysis and design experiments. Track record of new product development, preferably thermal fluid products. Strong analytical and problem-solving skills, with the ability to effectively troubleshoot and optimize fluid system performance. Excellent communication and documentation skills to convey complex technical concepts to both technical and non-technical audiences. What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to Massachusetts)$123,500.00 USD - $169,800.00 USD AnnualJob CategoryDesign, Process & Technology EngineeringRelocation: Eligible for domestic relocation only Is Sponsorship Available? No JetCool is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at JetCool, you must complete the application process first).

You probably don't realize it, but what we do at Veeco touches the lives of every person, every day. It's a bold statement, but it's true. From the smartphones in our pockets that access the world's collective knowledge, to the cloud-based services where all that information lives, to high-speed wireless communication and computing power needed to drive artificial intelligence, augmented and virtual reality, gaming and so much more, our technology is all around us. We design, develop, manufacture, and service highly complex, cutting-edge machines used by our customers to create the essential devices that drive the digital age, connect the world, and improve the human experience. Along with the world's leading technology companies, many of which are household names, we help solve their most difficult material science challenges, enabling technologies for a more connected, sustainable, and convenient world. We're looking for material difference-makers to join our growing team. Interested? Learn more at ********************** Overview: Veeco is looking for a Principal Mechanical Engineer for our San Jose, CA, location to play a key role in the development of new revolutionary Ion Beam Deposition Products for advanced materials. This person will be expected to drive projects across key cross-functional groups and work closely with key customers and accounts. This person will be a self-starter who has strong technical aptitude, excellent communication skills and will thrive in a fast-paced environment. This role involves overall system design, automation/robotics, vacuum vessel design, heat transfer, wafer handling, incorporation of OEM power supplies and controllers, as well as many other engineering and design areas. One important area of expertise is deep understanding of metal deposition process, defectivity issues, shields and liners development and design, pressure controls and other aspects required for the state-of-the-art semiconductor processing equipment. Responsibilities: Act as key team member for product development of semiconductor vacuum processing equipment, responsible for all mechanical design aspects of the equipment, subassemblies and components Provide mechanical engineering expertise, while focusing on design quality, reliability, effective cost, and ease of manufacturing Perform analytical studies and theoretical calculations, requiring a variety of engineering knowledge, including analysis of vacuum vessels, heat transfer, material structural analysis, static and dynamic, fluids, motion mechanisms Evolve new and innovative methods for product development and design by utilizing additive manufacturing Partner with manufacturing teams to complete designs that maximize the benefits using Additive Manufacturing while negotiating tolerance and other capabilities of the technology Prepare presentations and present design concepts, ideas, and test results to internal and external customers Provide expertise in mechanical engineering while participating in design reviews Provide “hands on” assistance and support to the manufacturing team Develop test plans and design of experiments and is directly involved in prototype development and testing Create and release engineering documentation through the ECO process Support Program Management with project flow through the PLC Phase gates Qualifications: Master's degree in a Mechanical Engineering and 12+ years of related experience or a PhD with 8+ years of related experience is required. Capital equipment & semiconductor device knowledge as well as deep understanding of product development cycle are also required. Knowledge, Skills and Abilities: Self-directed and possess excellent interpersonal/communication skills Disciplined and effective problem solving and influence skills proven through experience leading process and product improvement teams Collaborative attitude and comfortable with change and ambiguity Must have the ability to work well in a matrixed organization and adapt quickly to change Finite element analysis, both structural and thermal is a must Experience with SAP, or similar PLM system is required Ability to work effectively in a fast-paced, dynamic environment as part of a multi-disciplinary team, able to take initiative, own full projects, and/or lead a small project team General knowledge of electrical and software engineering disciplines Knowledge of industrial control systems, sensors, automation, robotics, instrumentation, motion control, motor selection, encoders, electronic packaging, SEMI regulatory standards is a plus Project management experience is a plus Must be hands-on with devices, prototyping, and troubleshooting Ability to travel up to 20% of the time Salary and Benefits The expected salary range for this position is $190,000-$240,000, plus a bonus opportunity. We will consider your location, experience, and other job-related factors when determining your pay. If your salary requirements exceed the advertised range and you remain interested in Veeco, we encourage you to apply or email your resume to ********************. Other benefits include: Medical, Dental, and Vision Employee Stock Purchase Plan (ESPP) 401(k) with Company Match Holiday, Vacation, and Sick Time Flexible Spending Accounts (FSA) Commuter Benefits Life and Accident Insurance Disability Insurance Tuition Reimbursement Employee Assistance Program (EAP) Identity Theft Remediation Emergency Travel Assistance Veeco is an equal opportunity employer. We evaluate applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information, and other legally protected characteristics. Veeco is committed to working with and providing reasonable accommodations to individuals with disabilities. Notice to Applicants: All communication about open positions and hiring will come from someone with a @veeco.com email address. You will always have multiple interviews and meet several team members (in-person or virtually) before we present an offer. We may also check references or conduct a background investigation as part of the offer process. We will never ask you for money for any reason, especially to send equipment or for pre-employment training. If you have any questions or concerns, or if someone has reached out to you and you think it might be a scam, please get in touch with us at ********************.

Primary Duties & Responsibilities Work with internal customers to define the automated system specifications. Select the main components, such as motion stages, vision components, sensors, pneumatical components, commercial tooling, frame, and etc. Layout the system and review the initial design with the customer. Detailed design all subsystems and related components. Generate necessary part drawings for part manufacturing. Work with technicians and manage the system assembly. Modify and improve the system design as needed. Design and implement automated assembly, test, and inspection systems for company internal customers. Utilize SolidWorks software to layout and design the automated system, subsystem, components, etc. Generate drawings for mechanical parts machining and surface treatment. Create BOM for the system support and additional system building. Document all designs in Agile database. Collaborate with teams to develop and transfer the new process to manufacturing site. Education & Experience Minimum 9 yr. of mechanical engineering experience in automated process and test systems development is a must. BS/MS in Mechanical Engineering or equivalent degree. Familiar with small tooling fixture design is preferred. Knowledge of laser technology is preferred. Skills Experience with semi-automated and automated processing systems. Familiarity with Microsoft Office, such as Power Point, Excel, and Word. Experience in wafer bar level or die level handling. Meticulous and thorough; diligent with design documentation. Ability to speak, read, write, and comprehend English is required. Integrity and self-motivated Ability to work in fast paced team and independent setting. Knowledge of machining, vision, and electrical engineering is useful. Working Conditions Primarily office-based with regular time spent in lab or manufacturing environments for system assembly, testing, and troubleshooting. May require occasional lifting of mechanical components or tools (up to 25 lbs) during equipment assembly. Frequent use of computer-aided design (CAD) software and other engineering tools in a seated position for extended periods. Occasional travel to manufacturing sites or supplier locations may be required to support equipment transfer or installation. Exposure to standard shop-floor conditions, including noise, moving mechanical parts, and the need for personal protective equipment (PPE). Physical Requirements Onsite or hybrid work. Ability to lift and move mechanical components or equipment weighing up to 25 pounds during system assembly or testing. Must be able to stand, walk, bend, and reach in a lab or manufacturing environment for extended periods when supporting equipment builds or troubleshooting. Safety Requirements All employees are required to follow the site EHS procedures and Coherent Corp. Corporate EHS standards. Quality and Environmental Responsibilities Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System. Culture Commitment Ensure adherence to company's values (ICARE) in all aspects of your position at Coherent Corp.: Integrity - Create an Environment of Trust Collaboration - Innovate Through the Sharing of Ideas Accountability - Own the Process and the Outcome Respect - Recognize the Value in Everyone Enthusiasm - Find a Sense of Purpose in Work Coherent Corp. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or an accommodation due to a disability, you may contact us at ****************************** .

Primary Duties & Responsibilities * Work with internal customers to define the automated system specifications. * Select the main components, such as motion stages, vision components, sensors, pneumatical components, commercial tooling, frame, and etc. * Layout the system and review the initial design with the customer. * Detailed design all subsystems and related components. Generate necessary part drawings for part manufacturing. * Work with technicians and manage the system assembly. Modify and improve the system design as needed. * Design and implement automated assembly, test, and inspection systems for company internal customers. * Utilize SolidWorks software to layout and design the automated system, subsystem, components, etc. * Generate drawings for mechanical parts machining and surface treatment. * Create BOM for the system support and additional system building. * Document all designs in Agile database. * Collaborate with teams to develop and transfer the new process to manufacturing site. Education & Experience * Minimum 9 yr. of mechanical engineering experience in automated process and test systems development is a must. * BS/MS in Mechanical Engineering or equivalent degree. * Familiar with small tooling fixture design is preferred. * Knowledge of laser technology is preferred. Skills * Experience with semi-automated and automated processing systems. * Familiarity with Microsoft Office, such as Power Point, Excel, and Word. * Experience in wafer bar level or die level handling. * Meticulous and thorough; diligent with design documentation. * Ability to speak, read, write, and comprehend English is required. * Integrity and self-motivated * Ability to work in fast paced team and independent setting. * Knowledge of machining, vision, and electrical engineering is useful. Working Conditions * Primarily office-based with regular time spent in lab or manufacturing environments for system assembly, testing, and troubleshooting. * May require occasional lifting of mechanical components or tools (up to 25 lbs) during equipment assembly. * Frequent use of computer-aided design (CAD) software and other engineering tools in a seated position for extended periods. * Occasional travel to manufacturing sites or supplier locations may be required to support equipment transfer or installation. * Exposure to standard shop-floor conditions, including noise, moving mechanical parts, and the need for personal protective equipment (PPE). Physical Requirements * Onsite or hybrid work. * Ability to lift and move mechanical components or equipment weighing up to 25 pounds during system assembly or testing. * Must be able to stand, walk, bend, and reach in a lab or manufacturing environment for extended periods when supporting equipment builds or troubleshooting. Safety Requirements All employees are required to follow the site EHS procedures and Coherent Corp. Corporate EHS standards. Quality and Environmental Responsibilities Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System. Culture Commitment Ensure adherence to company's values (ICARE) in all aspects of your position at Coherent Corp.: Integrity - Create an Environment of Trust Collaboration - Innovate Through the Sharing of Ideas Accountability - Own the Process and the Outcome Respect - Recognize the Value in Everyone Enthusiasm - Find a Sense of Purpose in Work Coherent Corp. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or an accommodation due to a disability, you may contact us at ******************************.

GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world's most inspired technology companies. With a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit *********** Summary of Role: To be a part of the US Application Engineering team, providing excellent technical customer support for GF technologies, focused on Power Management applications, leading to successful tape-outs. Essential Responsibilities: Cultivate long-term, strategic partnerships and alignment with GF customers to generate growing demand for our differentiated solutions Meet with GF customers to collect or better understand technical requests and issues gating design Provide application engineering solutions to solve complex design issues and ensure the customer's success Analyze customer requirements for application of GF's products Work independently under minimal supervision Routinely report status of projects and address design gating issues with urgency Advocate for customer to our internal development organizations to improve and enhance the GF's enablement solutions, technologies and business processes Resolve customer technical issues through GF's case system Support GF teams in creating or maintaining technical customer-facing documents Routinely coordinate and participate with GF teams to drive technical development, continuous improvement, cost reduction or productivity improvement Travel - Up to 10%, as needed Other Responsibilities: Be a company-wide subject matter expert in circuit design, applications or enablement, and able to guide or mentor peers on GF solutions or issue resolution Solve complex problems and bring innovation to problem-solving Represent the Application Engineering team within GF or in customer-related engagements Generate documents to facilitate customer issue resolution and internal business process introduction or improvements Perform all activities in a safe and responsible manner and support all Compliance, Environmental, Health, Safety & Security requirements and programs at GF Work and collaborate on other projects and assignments, as needed Required Qualifications: Bachelor's in Electrical or Computer Engineering or related field with 6+ years in semiconductor manufacturing, design or enablement Experience with circuit design environment, tools & methodologies Experience Power Management technology, application, design, PDK or design tools & methodologies Experience with Linux, shell scripting, SVRF, TCL, Python or other automation languages & environment Consistent performance and professionalism Skilled with Microsoft tools (e.g. Office, Outlook, SharePoint, MS-Dynamics, etc.) Strong communication skills Strong planning & organizational skill Fluency in English Language - written & verbal Preferred Qualifications: Master's in Electrical, Computer Engineering or related field with 7+ years in semiconductor manufacturing, design, or enablement; or PhD in Electrical, Computer Engineering or related field with 5+ years in semiconductor manufacturing, design or enablement Publication of design, application or design enablement documents in previous roles Experience with modeling, ESD, latch-up Experience with Booleans and design rules Experience with physical design, DRC, DFM Familiarity with device physics Familiarity with the tape-out process Familiarity with PCMs, process KPIs Familiarity with silicon manufacturing Project management Sales or Customer interface Cross-functional project leadership/participation Expected Salary Range $94,300.00 - $231,600.00 The exact Salary will be determined based on qualifications, experience and location. If you need a reasonable accommodation for any part of the employment process, please contact us by email at usaccommodations@gf.com and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address. An offer with GlobalFoundries is conditioned upon the successful completion of pre-employment conditions, as applicable, and subject to applicable laws and regulations. GlobalFoundries is fully committed to equal opportunity in the workplace and believes that cultural diversity within the company enhances its business potential. GlobalFoundries goal of excellence in business necessitates the attraction and retention of highly qualified people. Artificial barriers and stereotypic biases detract from this objective and may be illegally discriminatory. All policies and processes which pertain to employees including recruitment, selection, training, utilization, promotion, compensation, benefits, extracurricular programs, and termination are created and implemented without regard to age, ethnicity, ancestry, color, marital status, medical condition, mental or physical disability, national origin, race, religion, political and/or third-party affiliation, sex, sexual orientation, gender identity or expression, veteran status, or any other characteristic or category specified by local, state or federal law

GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world's most inspired technology companies. With a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit *********** Summary of Role: To be a part of the US Application Engineering team, providing excellent technical customer support for GF technologies, focused on Power Management applications, leading to successful tape-outs. Essential Responsibilities: Cultivate long-term, strategic partnerships and alignment with GF customers to generate growing demand for our differentiated solutions Meet with GF customers to collect or better understand technical requests and issues gating design Provide application engineering solutions to solve complex design issues and ensure the customer's success Analyze customer requirements for application of GF's products Work independently under minimal supervision Routinely report status of projects and address design gating issues with urgency Advocate for customer to our internal development organizations to improve and enhance the GF's enablement solutions, technologies and business processes Resolve customer technical issues through GF's case system Support GF teams in creating or maintaining technical customer-facing documents Routinely coordinate and participate with GF teams to drive technical development, continuous improvement, cost reduction or productivity improvement Travel - Up to 10%, as needed Other Responsibilities: Be a company-wide subject matter expert in circuit design, applications or enablement, and able to guide or mentor peers on GF solutions or issue resolution Solve complex problems and bring innovation to problem-solving Represent the Application Engineering team within GF or in customer-related engagements Generate documents to facilitate customer issue resolution and internal business process introduction or improvements Perform all activities in a safe and responsible manner and support all Compliance, Environmental, Health, Safety & Security requirements and programs at GF Work and collaborate on other projects and assignments, as needed Required Qualifications: Bachelor's in Electrical or Computer Engineering or related field with 6+ years in semiconductor manufacturing, design or enablement Experience with circuit design environment, tools & methodologies Experience Power Management technology, application, design, PDK or design tools & methodologies Experience with Linux, shell scripting, SVRF, TCL, Python or other automation languages & environment Consistent performance and professionalism Skilled with Microsoft tools (e.g. Office, Outlook, SharePoint, MS-Dynamics, etc.) Strong communication skills Strong planning & organizational skill Fluency in English Language - written & verbal Preferred Qualifications: Master's in Electrical, Computer Engineering or related field with 7+ years in semiconductor manufacturing, design, or enablement; or PhD in Electrical, Computer Engineering or related field with 5+ years in semiconductor manufacturing, design or enablement Publication of design, application or design enablement documents in previous roles Experience with modeling, ESD, latch-up Experience with Booleans and design rules Experience with physical design, DRC, DFM Familiarity with device physics Familiarity with the tape-out process Familiarity with PCMs, process KPIs Familiarity with silicon manufacturing Project management Sales or Customer interface Cross-functional project leadership/participation Expected Salary Range $94,300.00 - $231,600.00 The exact Salary will be determined based on qualifications, experience and location. If you need a reasonable accommodation for any part of the employment process, please contact us by email at usaccommodations@gf.com and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address. An offer with GlobalFoundries is conditioned upon the successful completion of pre-employment conditions, as applicable, and subject to applicable laws and regulations. GlobalFoundries is fully committed to equal opportunity in the workplace and believes that cultural diversity within the company enhances its business potential. GlobalFoundries goal of excellence in business necessitates the attraction and retention of highly qualified people. Artificial barriers and stereotypic biases detract from this objective and may be illegally discriminatory. All policies and processes which pertain to employees including recruitment, selection, training, utilization, promotion, compensation, benefits, extracurricular programs, and termination are created and implemented without regard to age, ethnicity, ancestry, color, marital status, medical condition, mental or physical disability, national origin, race, religion, political and/or third-party affiliation, sex, sexual orientation, gender identity or expression, veteran status, or any other characteristic or category specified by local, state or federal law

Via Separations is a Boston-area startup dedicated to enabling process efficiency and intensification for the industrial sector. In 2024, Via delivered its first commercial facility and changed the narrative around market-driven energy technologies that drive value for industrial customers. At the intersection of engineering, society, and impact, our team is passionate about making a difference and building the technology and organization to do it. We are a fast-paced, interdisciplinary team backed by leading venture capital firms, and we are looking to add talented, mission-driven people to our cohort. We are passionate about transformative impact, optimistic about scientific progress, and unafraid of hard problems. We believe that our people are our unfair advantage, and drive our mission forward. We embrace the diversity of our team for creative solutions and believe the best ideas come from the intersection of disciplines and perspectives. We want you to join us! Role Description As the Principal Mechanical Engineer, you will be the technical lead responsible for the analysis, modeling, design, drafting, and development of our commercial membrane systems. You will be an integral member of the cross-disciplinary engineering team and work alongside our external engineering partners to bring both our pilot scale and commercial systems to fruition. The role involves supporting, studying, understanding, and executing upon detailed project requirements and specifications. This position has a focus on leading the comprehensive design, analysis, and implementation of modular, skid-mounted integrated process systems, specializing in mechanical, structural, and piping systems. Responsibilities Include: * Lead Design & Development * Lead commercial engineering design efforts for Via membrane systems. * Lead the development, refinement, and optimization of project-specific equipment design packages, with a focus on the skidded equipment package. * Design process piping, equipment layout, and interconnecting mechanical components within the modular frame. * Aid in equipment specifications, vendor documentation, and bill of materials. Structural Design & Compliance Develop the Structural Skid Frame design, including beam sizing, bracing, and lift point calculations.Perform basic Structural Analysis (hand calculations or FEA) to ensure compliance with transportation and lifting requirements.Create detailed General Arrangement (GA) and fabrication drawings for the complete skid package.Ensure designs meet applicable codes (e.g., AISC, ASME B31.3, AWS D1.1). Fabrication, Quality, & Installation Lead the Factory Acceptance Testing (FAT) process and perform routine progress checks at manufacturing partner facilities to ensure build quality and schedule adherence.Review and assist in on-site plant installation (SAT) to ensure the skid system is correctly assembled, aligned, and integrated into the customer's facility according to design specifications. (Polished the second point to use the industry term 'SAT' (Site Acceptance Test) and clarify the integration focus.) Expertise & Collaboration As a subject matter expert, provide engineering support, training, and guidance to Via team members and relevant engineering partners.Work with external engineering partners and vendors to ensure compliance with Via Engineering design, budget, and project timelines. The ideal candidate will have most, if not all, of the following: * Bachelor's degree in Mechanical Engineering. Minimum of 8-10 years of progressive experience leading the mechanical and structural design of complex, skid-mounted process systems for capital projects. * Experience with Skid-Mounted Equipment or Modular Process Packages is essential. * Desired experience in large industrial scale equipment (e.g. oil & gas, chemical processing, membranes or separation processes) * Proficiency with an integrated 3D piping and structural CAD system (e.g., Autodesk Plant3d, SolidWorks with Routing, Inventor). * Deep working knowledge of structural steel design principles and welding requirements. * Familiarity with commonly-used concepts, practices, and procedures within a design/manufacturing * Familiarity with ASME B31.3 (Process Piping) and American Petroleum Institute (API) standards a plus * Experience in engineering document management is desirable but not necessary * Strong ability to manage time and quickly shifting priorities * Comfortable working in a fast-paced environment * A clear interest in sustainability * Some travel (up to 25%) may be required * In the event a field site requires entry screening, a background check and/or drug screen may be required * US work authorization is required for this role We offer: * Competitive compensation package, including equity options * Medical, Dental & Vision Insurance * Disability & Life Insurance * 401(k) * 12+ weeks of paid Family Leave * Paid Flex time off * Paid time off for Company holidays $126,000 - $155,000 a year In addition to the base salary listed above, Via's compensation package includes equity options and an annual performance bonus. Studies have shown that women and people of color are less likely to apply for jobs unless they believe they can perform every job description task. We are most interested in finding the best candidate for the job, and that candidate may come from a less traditional background. Via may consider an equivalent combination of knowledge, skills, education, and experience to meet minimum qualifications. If you are interested in applying, we encourage you to think broadly about your background and skill set for the role! At Via, we value and prioritize diversity of thought, access, and experiences, and are an equal opportunity employer by choice. We consider all qualified applicants equally for employment. We do not discriminate on the basis of race, color, national origin, ancestry, citizenship status, protected veteran status, religion, physical or mental disability, marital status, sex, sexual orientation, gender identity or expression, age, or any other basis protected by law, ordinance, or regulation. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Via Separations is a Boston-area startup dedicated to enabling process efficiency and intensification for the industrial sector. In 2024, Via delivered its first commercial facility and changed the narrative around market-driven energy technologies that drive value for industrial customers. At the intersection of engineering, society, and impact, our team is passionate about making a difference and building the technology and organization to do it. We are a fast-paced, interdisciplinary team backed by leading venture capital firms, and we are looking to add talented, mission-driven people to our cohort. We are passionate about transformative impact, optimistic about scientific progress, and unafraid of hard problems. We believe that our people are our unfair advantage, and drive our mission forward. We embrace the diversity of our team for creative solutions and believe the best ideas come from the intersection of disciplines and perspectives. We want you to join us! Role DescriptionAs the Principal Mechanical Engineer, you will be the technical lead responsible for the analysis, modeling, design, drafting, and development of our commercial membrane systems. You will be an integral member of the cross-disciplinary engineering team and work alongside our external engineering partners to bring both our pilot scale and commercial systems to fruition. The role involves supporting, studying, understanding, and executing upon detailed project requirements and specifications. This position has a focus on leading the comprehensive design, analysis, and implementation of modular, skid-mounted integrated process systems, specializing in mechanical, structural, and piping systems.Responsibilities Include: Lead Design & Development Lead commercial engineering design efforts for Via membrane systems. Lead the development, refinement, and optimization of project-specific equipment design packages, with a focus on the skidded equipment package. Design process piping, equipment layout, and interconnecting mechanical components within the modular frame. Aid in equipment specifications, vendor documentation, and bill of materials. Structural Design & Compliance Develop the Structural Skid Frame design, including beam sizing, bracing, and lift point calculations. Perform basic Structural Analysis (hand calculations or FEA) to ensure compliance with transportation and lifting requirements. Create detailed General Arrangement (GA) and fabrication drawings for the complete skid package. Ensure designs meet applicable codes (e.g., AISC, ASME B31.3, AWS D1.1). Fabrication, Quality, & Installation Lead the Factory Acceptance Testing (FAT) process and perform routine progress checks at manufacturing partner facilities to ensure build quality and schedule adherence. Review and assist in on-site plant installation (SAT) to ensure the skid system is correctly assembled, aligned, and integrated into the customer's facility according to design specifications. (Polished the second point to use the industry term 'SAT' (Site Acceptance Test) and clarify the integration focus.) Expertise & Collaboration As a subject matter expert, provide engineering support, training, and guidance to Via team members and relevant engineering partners. Work with external engineering partners and vendors to ensure compliance with Via Engineering design, budget, and project timelines. The ideal candidate will have most, if not all, of the following: Bachelor's degree in Mechanical Engineering. Minimum of 8-10 years of progressive experience leading the mechanical and structural design of complex, skid-mounted process systems for capital projects. Experience with Skid-Mounted Equipment or Modular Process Packages is essential. Desired experience in large industrial scale equipment (e.g. oil & gas, chemical processing, membranes or separation processes) Proficiency with an integrated 3D piping and structural CAD system (e.g., Autodesk Plant3d, SolidWorks with Routing, Inventor). Deep working knowledge of structural steel design principles and welding requirements. Familiarity with commonly-used concepts, practices, and procedures within a design/manufacturing Familiarity with ASME B31.3 (Process Piping) and American Petroleum Institute (API) standards a plus Experience in engineering document management is desirable but not necessary Strong ability to manage time and quickly shifting priorities Comfortable working in a fast-paced environment A clear interest in sustainability Some travel (up to 25%) may be required In the event a field site requires entry screening, a background check and/or drug screen may be required US work authorization is required for this role We offer: Competitive compensation package, including equity options Medical, Dental & Vision Insurance Disability & Life Insurance 401(k) 12+ weeks of paid Family Leave Paid Flex time off Paid time off for Company holidays Studies have shown that women and people of color are less likely to apply for jobs unless they believe they can perform every job description task. We are most interested in finding the best candidate for the job, and that candidate may come from a less traditional background. Via may consider an equivalent combination of knowledge, skills, education, and experience to meet minimum qualifications. If you are interested in applying, we encourage you to think broadly about your background and skill set for the role! At Via, we value and prioritize diversity of thought, access, and experiences, and are an equal opportunity employer by choice. We consider all qualified applicants equally for employment. We do not discriminate on the basis of race, color, national origin, ancestry, citizenship status, protected veteran status, religion, physical or mental disability, marital status, sex, sexual orientation, gender identity or expression, age, or any other basis protected by law, ordinance, or regulation.

Garrett Advancing Motion is the true pioneer of automotive powertrain technologies dating back more than 60 years. It continues today as the world's leader in technology solutions for passenger cars, commercial vehicles, and off-highway equipment. Garrett supplies technology to nearly all major automakers in addition to the global aftermarket under the Garrett brand name. As a result, unlike many other OEM or supplier organizations, Garrett Advancing Motion has visibility across a broad range of OEM's and Tier 1 suppliers. We are hiring for an Aerodynamics Development Engineer who will be based in our Torrance, California facility. The Aerodynamics Development Engineer is part of the commercial vehicle (CV) Aerodynamics team and linked to the Wheels and Aerodynamics (W&A) Center of Excellence (COE). This position requires a solid background in turbomachine aerodynamics and mechanical engineering, either from work experience or from education. It also requires a high level of autonomy and problem-solving capability to define technical planning to resolve complex aerodynamic and mechanical problem statements. Responsibilities include: Design, test and qualify the next generation of compressor and turbine aerodynamics for integration in the CV portfolio, using state-of-the-art analytical (CFD/FEA) and experimental (Test Rigs) tools, and this based on the development plan established together with the CV Aerodynamics Manager. Close collaboration with the internal engineering customer teams to design robust compressor and turbine stages that will meet the performance, durability, packaging, noise and cost constraints, and be successfully integrated into customer turbocharger product. Support the resolution of technical problems and performance challenges by providing aerodynamics and mechanical engineering support to other internal teams (application and/or COEs). Collaborate with other team members of the W&A organization to increase innovation while deploying continuous improvement to the team tools and processes. Basic Qualifications: Master's degree or higher in the field of Aerospace or Mechanical Engineering. Minimum 3 years' experience in turbomachinery design and optimization (compressor and/or turbine design for performance, life, cost, noise). Proficiency with turbomachinery design tools - aerodynamic tools. Proficiency with High fidelity CFD turbomachine simulation (Ansys, Numeca). Proven experience in 3D design packages (CATIA, Onshape, SolidWorks), programming (Matlab or python), and experimental turbomachinery testing (rig concepts, data analysis and post-processing). Knowledge of turbine design and expander designs (Aerodynamics and/or mechanical) Strong drive to deliver, ability to multitask and to work in multi-cultural and cross-functional teams, with a focus on continuous improvement. Ability to grasp technical issues quickly and relate multiple observations to each other. Additional Desired Qualifications: Machine learning experience (DNN, auto-optimization). Commercial optimization software experience. Proven Testing and analysis skills, including FEA and CFD post-processing analysis tools. Turbomachine blade erosion (multi-phase turbomachine air+water) and HCF Turbine failure mode experience. Pay Range The salary range for this role is between $87,400 and $135,000. *Note that this range represents the pay range for all positions in the job grade within which this position falls. Starting rate of pay may vary based on factors including, but not limited to, position offered, education, training, and/or experience. Garrett is an Equal Opportunity Employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, or veteran status. #LI-CR