Computer Numerical Controller Machinist jobs at Hanwha Holdings - 9 jobs

Job Title: CNC Machinist 1 Exempt Status: Non-Exempt : Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents. Summary: Plan and perform various CNC turning and milling operations to machine a variety of metal parts under the supervision of the Operations Manager.. Essential Functions: Machine parts to specifications using machine tools such as lathes and milling machines Work from blueprints, engineering instructions, and specifications Setup, adjust and operate all of the basic machine tools and many specialized tools in order to perform precision machining operations Align and secure holding fixtures, cutting tools, attachments, accessories, and materials onto machines Check parts to ensure that they are properly lubricated and cooled Measure, examine, and test completed units to defects and ensure conformance to specifications, using precision instruments such as micrometers Clean and lubricate machines, tools, and equipment in order to remove grease, rust, stains, and foreign matter Maintain records and document in-process inspection data Required Qualifications & Experience: Must be a “U.S. Person” as defined by the U.S. Government and able to work without restrictions with ITAR related data High School Degree or G.E.D 1+ years of experience Desired Knowledge, Skills, and Abilities Precision Manufacturing Certificate preferred Must be able to read, write, understand, and speak English at a functional level Ability to communicate professionally and effectively with all levels of the organization Ability to interpret policies, procedures, and standard business practices Ability to read and interpret blueprints and engineering work instructions Ability to setup and operate CNC turning and milling machines Ability to measure using standard shop tools, machine tools, and engineered gaging to close established tolerances Knowledge of G & M codes Ability to travel domestically - 10% max Physical Requirements: Must be able to lift 35lbs Must be able to sit and stand for extended periods of time Must be able to go up and down stairs frequently Reasonable accommodations may be made to enable individuals with disabilities to perform. Hanwha Aerospace USA is an Equal Opportunity Employer. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, Sexual Orientation, and Gender Identity or Expression, protected veteran status, or any other characteristic protected by law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. *Subject to change with or without notice* 2nd Shift, Monday - Thursday 3:30PM - 2:00AM

Job Title: CNC Machinist 1 Exempt Status: Non-Exempt : Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents. Summary: Plan and perform various CNC turning and milling operations to machine a variety of metal parts under the supervision of the Operations Manager.. Essential Functions: Machine parts to specifications using machine tools such as lathes and milling machines Work from blueprints, engineering instructions, and specifications Setup, adjust and operate all of the basic machine tools and many specialized tools in order to perform precision machining operations Align and secure holding fixtures, cutting tools, attachments, accessories, and materials onto machines Check parts to ensure that they are properly lubricated and cooled Measure, examine, and test completed units to defects and ensure conformance to specifications, using precision instruments such as micrometers Clean and lubricate machines, tools, and equipment in order to remove grease, rust, stains, and foreign matter Maintain records and document in-process inspection data Required Qualifications & Experience: Must be a “U.S. Person” as defined by the U.S. Government and able to work without restrictions with ITAR related data High School Degree or G.E.D 1+ years of experience Desired Knowledge, Skills, and Abilities Precision Manufacturing Certificate preferred Must be able to read, write, understand, and speak English at a functional level Ability to communicate professionally and effectively with all levels of the organization Ability to interpret policies, procedures, and standard business practices Ability to read and interpret blueprints and engineering work instructions Ability to setup and operate CNC turning and milling machines Ability to measure using standard shop tools, machine tools, and engineered gaging to close established tolerances Knowledge of G & M codes Ability to travel domestically - 10% max Physical Requirements: Must be able to lift 35lbs Must be able to sit and stand for extended periods of time Must be able to go up and down stairs frequently Reasonable accommodations may be made to enable individuals with disabilities to perform. Hanwha Aerospace USA is an Equal Opportunity Employer. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, Sexual Orientation, and Gender Identity or Expression, protected veteran status, or any other characteristic protected by law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. *Subject to change with or without notice* 2nd Shift, Monday - Thursday 3:30PM - 2:00AM

Job Description Job Title: CNC Machinist 1 Exempt Status: Non-Exempt : Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents. Summary: Plan and perform various CNC turning and milling operations to machine a variety of metal parts under the supervision of the Operations Manager.. Essential Functions: Machine parts to specifications using machine tools such as lathes and milling machines Work from blueprints, engineering instructions, and specifications Setup, adjust and operate all of the basic machine tools and many specialized tools in order to perform precision machining operations Align and secure holding fixtures, cutting tools, attachments, accessories, and materials onto machines Check parts to ensure that they are properly lubricated and cooled Measure, examine, and test completed units to defects and ensure conformance to specifications, using precision instruments such as micrometers Clean and lubricate machines, tools, and equipment in order to remove grease, rust, stains, and foreign matter Maintain records and document in-process inspection data Required Qualifications & Experience: Must be a “U.S. Person” as defined by the U.S. Government and able to work without restrictions with ITAR related data High School Degree or G.E.D 1+ years of experience Desired Knowledge, Skills, and Abilities Precision Manufacturing Certificate preferred Must be able to read, write, understand, and speak English at a functional level Ability to communicate professionally and effectively with all levels of the organization Ability to interpret policies, procedures, and standard business practices Ability to read and interpret blueprints and engineering work instructions Ability to setup and operate CNC turning and milling machines Ability to measure using standard shop tools, machine tools, and engineered gaging to close established tolerances Knowledge of G & M codes Ability to travel domestically - 10% max Physical Requirements: Must be able to lift 35lbs Must be able to sit and stand for extended periods of time Must be able to go up and down stairs frequently Reasonable accommodations may be made to enable individuals with disabilities to perform. Hanwha Aerospace USA is an Equal Opportunity Employer. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, Sexual Orientation, and Gender Identity or Expression, protected veteran status, or any other characteristic protected by law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. *Subject to change with or without notice* 2nd Shift, Monday - Thursday 3:30PM - 2:00AM

Job Title: CNC Machinist 3 Exempt Status: Non-Exempt : Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents. Summary: Plan and perform various CNC turning and milling operations to machine a variety of metal parts. Essential Functions: Machine parts to specifications using machine tools such as lathes and milling machines Work from blueprints, engineering instructions, specifications, and blueprints Measure, examine, and test completed units to detect defects and ensure conformance to specifications, using precision instruments such as micrometers. Set up, adjust, and operate all of the basic machine tools and many specialized tools in order to perform precision machining operations Align and secure holding fixtures, cutting tools, attachments, accessories, and materials onto machines Select appropriate tools, machines, and materials to be used in the preparation of machine work Check part to ensure that they are properly lubricated and cooled Operate equipment to verify operational efficiency Clean and lubricate machines, tools, and equipment in order to remove grease, rust, stains, and foreign matter Maintain records and documents in-process inspection data as required Report faulty or unusual conditions to the appropriate level of supervision Adhere to standards of safety and housekeeping standards Operate and measure machine Perform other related duties or responsibilities as required. Required Qualifications & Experience: Must be a “U.S. Person” as defined by the U.S. Government and able to work without restrictions with ITAR related data High School Degree or G.E.D 5+ years of experience as a CNC Machinist Desired Knowledge, Skills, and Abilities Must be able to read, write, understand, and speak English at a functional level Ability to communicate professionally and effectively with all levels of the organization Ability to interpret policies, procedures, and standard business practices Ability to read and interpret blueprints and engineering work instructions Must have strong attention to detail Ability to set up and operate CNC turning and milling machines. Ability to read and understand engineering work instructions. Ability to measure using standard shop tools, machine tools, and engineered gaging to close established tolerances. Knowledge of appropriate speeds and feeds for materials and tools Knowledge of machines codes and G codes. Ability to travel domestically - 5% max Physical Requirements: Must be able to lift 35lbs Must be able to sit and stand for extended periods of time Must be able to go up and down stairs frequently Reasonable accommodations may be made to enable individuals with disabilities to perform. Hanwha Aerospace USA is an Equal Opportunity Employer. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, Sexual Orientation, and Gender Identity or Expression, protected veteran status, or any other characteristic protected by law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. *Subject to change with or without notice*

CNC Machinist 2 - Non-Exempt Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight-critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents. Plan and perform various CNC turning and milling operations to machine a variety of metal parts under the supervision of the Operations Manager. Location: East Windsor, CT Reports to: Production Supervisor Essential Duties & Responsibilities Reasonable accommodations may be made to enable individuals with disabilities to perform. Machine parts to specifications using machine tools such as lathes and milling machines Work from blueprints, engineering instructions, specifications, and blueprints Measure, examine, and test completed units to detect defects and ensure conformance to specifications, using precision instruments such as micrometers. Set up, adjust, and operate all of the basic machine tools and many specialized tools in order to perform precision machining operations Align and secure holding fixtures, cutting tools, attachments, accessories, and materials onto machines Select appropriate tools, machines, and materials to be used in the preparation of machine work Check part to ensure that they are properly lubricated and cooled Operate equipment to verify operational efficiency Clean and lubricate machines, tools, and equipment in order to remove grease, rust, stains, and foreign matter Maintain records and documents in-process inspection data as required Report faulty or unusual conditions to the appropriate level of supervision Able to measure using standard shop tools, machine tools, and engineered gaging to close established tolerances Adhere to standards of safety and housekeeping standards Operate and measure machine Performs other related duties or responsibilities as requested or required, whether or not specifically mentioned in this job description. Participate in training as required 5-10% Domestic Travel required Physical Demands : Must be able to lift, push, or pull at least 35 lbs. Regularly required to sit, stand, reach, bend, and move about our facility Requirements: Must be a “US Person” as defined by US Government and able to work without restriction with ITAR related data. High School Diploma or GED required Precision Manufacturing certificate preferred Must be able to read, write, understand, and speak English at a functional level Basic reading, writing, and some advanced arithmetic skills Ability to read and understand engineering work instructions Some ability to set up and operate CNC turning and milling machines Basic knowledge of appropriate speeds and feeds for materials and tools Working knowledge of Machine codes, G codes AAP Statement Hanwha Aerospace USA, is an Equal Opportunity Employer. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, Sexual Orientation, and Gender Identity or Expression, protected veteran status, or any other characteristic protected by law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. *Subject to change with or without notice*

Hanwha is a major South Korean conglomerate with diverse business interests across multiple industries including aerospace and defense, chemicals, energy, finance, and construction which has reached $61B annually. Established in 1952, Hanwha has grown to become a global leader in these sectors, with a strong focus on innovation and sustainable development. The company is particularly known for its advanced technologies in defense systems, solar energy solutions, and chemical manufacturing. Hanwha operates internationally, leveraging its robust R&D capabilities and strategic partnerships to drive growth and maintain a competitive edge in global markets. Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight-critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents. Location: Newington, CT Reports to: Production Supervisor Responsibilities: Reasonable accommodations may be made to enable individuals with disabilities to perform. Machine parts to specifications using machine tools such as lathes and milling machines Work from blueprints, engineering instructions, specifications, and blueprints Measure, examine, and test completed units to detect defects and ensure conformance to specifications, using precision instruments such as micrometers. Set up, adjust, and operate all of the basic machine tools and many specialized tools in order to perform precision machining operations Align and secure holding fixtures, cutting tools, attachments, accessories, and materials onto machines Select appropriate tools, machines, and materials to be used in the preparation of machine work Check part to ensure that they are properly lubricated and cooled Operate equipment to verify operational efficiency Clean and lubricate machines, tools, and equipment in order to remove grease, rust, stains, and foreign matter Maintain records and documents in-process inspection data as required Report faulty or unusual conditions to the appropriate level of supervision Able to measure using standard shop tools, machine tools, and engineered gaging to close established tolerances Adhere to standards of safety and housekeeping standards Performs other related duties or responsibilities as requested or required, whether or not specifically mentioned in this job description. Required Qualifications: Must be a “US Person” as defined by US Government and able to work without restriction with ITAR related data. High school diploma or GED required. Basic reading, writing, and some advanced arithmetic skills. Must be able to read, write, understand, and speak English at a functional level. Ability to read and understand engineering work instructions Some ability to set up and operate CNC turning and milling machines. Basic knowledge of appropriate speeds and feeds for materials and tools. Working knowledge of Machine codes, G codes Preferred Qualifications: Precision Manufacturing Certificate preferred. AAP Statement Hanwha Aerospace USA, is an Equal Opportunity Employer. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, Sexual Orientation, and Gender Identity or Expression, protected veteran status, or any other characteristic protected by law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. *Subject to change with or without notice* Weekend Day Shift- Friday, Saturday, Sunday (5:00 am-5:00 pm) Weekend Night Shift-Friday, Saturday, Sunday (5:00 pm- 5:00 am) 5:00 am-5:00 pm and 5:00 pm- 5:00 am

Job Title: CNC Machinist 1 Exempt Status: Non-Exempt : Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents. Summary: Plan and perform various CNC turning and milling operations to machine a variety of metal parts under the supervision of the Operations Manager.. Essential Functions: Machine parts to specifications using machine tools such as lathes and milling machines Work from blueprints, engineering instructions, and specifications Setup, adjust and operate all of the basic machine tools and many specialized tools in order to perform precision machining operations Align and secure holding fixtures, cutting tools, attachments, accessories, and materials onto machines Check parts to ensure that they are properly lubricated and cooled Measure, examine, and test completed units to defects and ensure conformance to specifications, using precision instruments such as micrometers Clean and lubricate machines, tools, and equipment in order to remove grease, rust, stains, and foreign matter Maintain records and document in-process inspection data Required Qualifications & Experience: Must be a “U.S. Person” as defined by the U.S. Government and able to work without restrictions with ITAR related data High School Degree or G.E.D 1+ years of experience Desired Knowledge, Skills, and Abilities Precision Manufacturing Certificate preferred Must be able to read, write, understand, and speak English at a functional level Ability to communicate professionally and effectively with all levels of the organization Ability to interpret policies, procedures, and standard business practices Ability to read and interpret blueprints and engineering work instructions Ability to setup and operate CNC turning and milling machines Ability to measure using standard shop tools, machine tools, and engineered gaging to close established tolerances Knowledge of G & M codes Ability to travel domestically - 10% max Physical Requirements: Must be able to lift 35lbs Must be able to sit and stand for extended periods of time Must be able to go up and down stairs frequently Reasonable accommodations may be made to enable individuals with disabilities to perform. Hanwha Aerospace USA is an Equal Opportunity Employer. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, Sexual Orientation, and Gender Identity or Expression, protected veteran status, or any other characteristic protected by law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. *Subject to change with or without notice* Fri-Sun 5a-5p

Hanwha is a major South Korean conglomerate with diverse business interests across multiple industries including aerospace and defense, chemicals, energy, finance, and construction which has reached $61B annually. Established in 1952, Hanwha has grown to become a global leader in these sectors, with a strong focus on innovation and sustainable development. The company is particularly known for its advanced technologies in defense systems, solar energy solutions, and chemical manufacturing. Hanwha operates internationally, leveraging its robust R&D capabilities and strategic partnerships to drive growth and maintain a competitive edge in global markets. Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight-critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents. Location: Newington, CT Reports to: Production Supervisor Responsibilities: Reasonable accommodations may be made to enable individuals with disabilities to perform. Machine parts to specifications using machine tools such as lathes and milling machines Work from blueprints, engineering instructions, specifications, and blueprints Measure, examine, and test completed units to detect defects and ensure conformance to specifications, using precision instruments such as micrometers. Set up, adjust, and operate all of the basic machine tools and many specialized tools in order to perform precision machining operations Align and secure holding fixtures, cutting tools, attachments, accessories, and materials onto machines Select appropriate tools, machines, and materials to be used in the preparation of machine work Check part to ensure that they are properly lubricated and cooled Operate equipment to verify operational efficiency Clean and lubricate machines, tools, and equipment in order to remove grease, rust, stains, and foreign matter Maintain records and documents in-process inspection data as required Report faulty or unusual conditions to the appropriate level of supervision Able to measure using standard shop tools, machine tools, and engineered gaging to close established tolerances Adhere to standards of safety and housekeeping standards Performs other related duties or responsibilities as requested or required, whether or not specifically mentioned in this job description. Required Qualifications: Must be a “US Person” as defined by US Government and able to work without restriction with ITAR related data. High school diploma or GED required. Basic reading, writing, and some advanced arithmetic skills. Must be able to read, write, understand, and speak English at a functional level. Ability to read and understand engineering work instructions Some ability to set up and operate CNC turning and milling machines. Basic knowledge of appropriate speeds and feeds for materials and tools. Working knowledge of Machine codes, G codes Preferred Qualifications: Precision Manufacturing Certificate preferred. AAP Statement Hanwha Aerospace USA, is an Equal Opportunity Employer. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, Sexual Orientation, and Gender Identity or Expression, protected veteran status, or any other characteristic protected by law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. *Subject to change with or without notice* Weekend Day Shift- Friday, Saturday, Sunday (5:00 am-5:00 pm) Weekend Night Shift-Friday, Saturday, Sunday (5:00 pm- 5:00 am) 5:00 am-5:00 pm and 5:00 pm- 5:00 am