Electrical Design Engineer jobs at Hazen and Sawyer

If you are an Internal City Employee, Retiree or Dependent/Survivor of a City Employee please apply internally via Career Icon in your Workday account. Make a difference in the community you live in! As a Community Builder-an employee with the City of Gainesville- you will have a direct hand in building and improving your community and making a visible impact on the lives of your neighbors. Working for local government is more than a job, it's a chance to contribute to community success and to help enhance the Gainesville way of life. Department: 1920 GRU - ED Electric and Gas Support Salary Range Minimum: $68,979.59 Salary Range Maximum: $108,234.05 Closing Date: Until Filled Job Details: Independent professional caliber and technical engineering work requiring application of standard engineering principles and procedures. Positions allocated to this classification report to a designated supervisor and work under general supervision receiving instructions on specific assignment objectives, complex features; assistance furnished on unusual problems. Work in this class is distinguished from other classes by its limited supervisory responsibility and lack of policy interpretation, and by its emphasis on independent fully competent application of standard engineering principles to engineering problems having clear and specified objectives, interpretation of data, and requiring investigation of a limited number of variables. Note: The Engineer 3 / Utility Designer 3 classification is the third in a series of four Engineer / Utility Designer Classifications of progressively more demanding job competencies and engineering duties. It should be understood that the job competencies, duties and requirements of the Engineer / Utility Designer1 and 2 are inherently included in this position. The inability to acquire and develop the required job competencies for each progressively higher-level Engineer / Utility Designer classification (Engineer / Utility Designer 4) may result in performance management action up to and including employment termination. Bachelor of Science in Electrical engineering from an Accreditation Board for Engineering and Technology (ABET) accredited educational institution or similarly accredited non-US institution, and four (4) years of experience in the area of assigned engineering responsibility, OR Master's degree in Electrical engineering from an Accreditation Board for Engineering and Technology (ABET) accredited educational institution or similarly accredited non-US institution, and three (3) years of experience in the area of assigned engineering responsibility. : SUMMARY Independent professional caliber and technical engineering work requiring application of standard engineering principles and procedures. Positions allocated to this classification report to a designated supervisor and work under general supervision receiving instructions on specific assignment objectives, complex features; assistance furnished on unusual problems. Work in this class is distinguished from other classes by its limited supervisory responsibility and lack of policy interpretation, and by its emphasis on independent fully competent application of standard engineering principles to engineering problems having clear and specified objectives, interpretation of data, and requiring investigation of a limited number of variables. Note: The Engineer 3 / Utility Designer 3 classification is the third in a series of four Engineer / Utility Designer Classifications of progressively more demanding job competencies and engineering duties. It should be understood that the job competencies, duties and requirements of the Engineer / Utility Designer1 and 2 are inherently included in this position. The inability to acquire and develop the required job competencies for each progressively higher-level Engineer / Utility Designer classification (Engineer / Utility Designer 4) may result in performance management action up to and including employment termination. EXAMPLES OF WORK* *This section of the job description is not intended to be a comprehensive list of duties and responsibilities of the position. The omission of a specific job function does not absolve an employee from being required to perform additional tasks incidental to or inherent in the job. Performance of lower level duties may be required. ESSENTIAL JOB FUNCTIONS Depending on area of assignment: Prepares engineering analyses of some difficulty and prepares specifications, process studies, research investigations, and reports. Requires negotiating skills and diplomacy. Prepares long and short-range master plan studies. Evaluates, selects, and applies standard engineering techniques and procedures. Makes minor adaptations and modifications. Inspects construction work in progress to determine whether proper materials and workmanship are used and compliance with plans and specifications. Designs, prepares, and reviews plans, specifications, and detailed cost estimates for changes, additions, and deletions to the applicable area of assignment. Designs and develops equipment with relatively few complex features. Tests and evaluates materials and/or equipment. Assists in providing consultative services to management relating to sound environmental practices. Personal contacts include other engineering personnel, customers, contractors, and suppliers requiring the cultivation and maintenance of effective business relationships. Assists in representing organization interests to a variety of outside groups. Assists in preparing departmental budget estimates by assembling and preparing data, reports, and cost estimates. Attends work on a continuous and regular basis. NON-ESSENTIAL JOB FUNCTIONS May act in absence of supervisor. May be required to supervise employees for purposes of the Drug Free Workplace Program, depending on job assignment and work location. Will be required to respond under emergency conditions. Performs other related duties as assigned. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential job function satisfactorily. Below are the required education, experience, knowledge, skills and abilities to perform the essential functions. EDUCATION AND EXPERIENCE Bachelor of Science in engineering from an Accreditation Board for Engineering and Technology (ABET) accredited educational institution or similarly accredited non-US institution, and four (4) years of experience in the area of assigned engineering responsibility, OR Master's degree in engineering from an Accreditation Board for Engineering and Technology (ABET) accredited educational institution or similarly accredited non-US institution, and three (3) years of experience in the area of assigned engineering responsibility. Note: Positions requiring the Professional Engineer (PE) certification require graduation from an ABET accredited institution and do not permit graduation from a similarly accredited institution. CERTIFICATIONS OR LICENSES Licenses Valid Florida Class E Driver's License required. Certifications Valid State of Florida “Engineering Intern” license may be required for Water/Waste Water, Public Works or special project areas. Professional Engineer license preferred. KNOWLEDGE, SKILLS AND ABILITIES Depending on area of assignment: Computer Skills Demonstrate proficiency with MicroSoft Office Suite or equivalent and possess a proficient knowledge of software utilized in the engineering discipline as required by the individual department. Proficiency in specialized software may be required. Level of Professional and Industry Competency Independently perform more complex engineering work requiring application of standard techniques, procedures, and criteria in carrying out a sequence of related engineering tasks. Exercise judgment in decision making related to selection of engineering alternatives, techniques, procedures, and criteria. (For training and developmental purposes, assignments may include some work that is typical of a higher level.) Thorough knowledge of engineering principles, procedures, and practices applied in planning, location, design, construction, and operation in area of assignment. Decision Making / Level of Independence/ Direction received Receive instructions on specific assignment objectives, complex features, and possible solutions. Assistance is furnished on unusual problems and work is reviewed for application of sound professional judgment. May work independently within established deadlines. Ability to collaborate with engineers / utility designers to perform studies and equipment evaluations. Complexity and Magnitude of Assignments Perform assignments, which involve design plans, investigations, a process study, specifications, surveys, structures, or equipment with increasingly more complex features and aspects. May also perform other activities of limited scope requiring knowledge of principles and techniques commonly employed in the specific discipline. Written and Verbal Communication Skills Write effective letters, reports, and responses to regulatory agencies with associated documentation and fill out forms. Speak effectively in one-on-one situations and to diverse groups. Prepare and deliver technical presentations appropriate to the targeted groups. Write specifications with input from senior level engineers. Assist in preparation of and performance of engineering project studies and evaluations. Prepare reports with limited oversight by senior staff member. Continuing Education and Development Maintain currency in assigned engineering discipline, regulatory and other related knowledge by reviewing information disseminated by senior engineering personnel. Relationship Building and Maintenance (Internal and External) Has contact other engineering personnel within the organization and with customers, contractors, suppliers, and regulatory agencies requiring relationship building skills and persuasiveness. The incumbent may represent the City to external organizations, task forces, and committees as appropriate. The incumbent receives guidance by senior engineers in addressing customer requirements that involve negotiating skills and diplomacy. Ability to work effectively with elected officials, charter officers, department heads, and representatives of other agencies, other city employees, and the general public. Supervision / Team Leadership / Project Direction Provide guidance, assistance and/or interpretation to others. May provide limited supervision or coordination of work of one or more subordinate engineers, engineering technicians, and other support personnel who assist in the specific discipline. Manage a project of limited scope or assist a more senior engineer in a larger project. Receive oversight on assignments by a more senior engineer, but more in the form of concept review as opposed to task delineation and calculation checking. Engineering Data Collection and Economic & Statistical Analysis Apply knowledge of engineering economic analysis, statistics and organizing and data collection methods. Compare alternatives using appropriate economic analysis. Make engineering recommendations based on economic analysis. Assist in collecting engineering data. Analyze and present data. Direct the data gathering tasks of Engineers / Utility Designers 1 and 2. PHYSICAL AND ENVIRONMENTAL REQUIREMENTS To perform this job successfully, an individual must possess certain physical abilities and be able to withstand work related environmental conditions. PHYSICAL REQUIREMENTS May work at heights of over 100 feet on open grating or from aerial devices required. Work may require physical strength and agility sufficient to safely perform all essential functions. Work may require use of personal protection equipment including hearing protection, eye protection, foot protection, hand protection, and head protection. WORK ENVIRONMENT Work may require performance of tasks outdoors under varying climatic conditions. Work may require exposure to hazardous conditions and noxious chemicals. Work may require performance of tasks in extreme heat and confined areas. Note: May Require Assessment(s). May fill multiple positions. May establish an eligibility list. Come join our team! The City of Gainesville offers a competitive benefits package and opportunities to grow both professionally and personally. All ‘regular' employees are eligible for traditional benefits such as health insurance, life insurance, paid leave, 11 paid a holidays a year, a pension plan and a deferred compensation plan, but we also offer great things like on-site fitness centers, tuition reimbursement, on-site medical staff and a wellness program to keep you healthy and happy. Please note; benefits are not available for temporary employees. Equal Opportunity The City of Gainesville is an equal opportunity/affirmative action employer and does not discriminate in hiring. Minorities, women and individuals with disabilities are encouraged to apply. Individuals with a disability, who require special accommodations during the selection process, should notify the Human Resources Department at ************ or TDD/TTY at ************. Veterans' Preference Veterans are encouraged to apply. Veterans' Preference ensures that veterans and eligible persons are given consideration at each step of the selection process. However, preference does not guarantee that a veteran or other eligible person will be the candidate selected to fill the position. Section 295.07, Florida Statutes (F.S.) specifies who is eligible for Veterans' Preference. State of Florida residency is not required for Veterans' Preference. If you are unable to apply online due to a disability, contact recruiting at ************************ or by calling ************.

Systems Electrical Engineer (II-Sr.) [Applications will be considered in the order they are submitted.] Provo City is looking for a full-time Utility Electrical Engineer to provide professional engineering work responsible to coordinate, plan, design, estimate, and prepare specifications for building electrical distribution/transmission systems in Provo City's Energy department. Civic-minded individuals interested in supporting these services provided to the residents of Provo City are strongly encouraged to apply. Job Details What is the compensation? (G37, G40) $90,592 - $144,567 per annum (depending on experience) Provo City offers generous employer-paid health insurance; retirement and pension plans, including 401k and 401k matching; paid leaves, including vacation, sick, holidays, bereavement, and parental leaves; educational assistance; competitive pay; and regular review of compensation practices to remain competitive with the market. Employees also receive great perks: free use of the Provo Recreation Center and Peaks Ice Arena, a Provo Library card, 50% off green fees at Timpanogos Golf Course, a 4/10 work schedule, and others. For more information about benefits click here. What are the main duties? * Prepare specifications and perform engineering design for electrical systems, including transmission and distribution lines, substations, and related facilities. * Conduct electrical system analyses and studies (load flow, short circuit, load forecasting, relay and fuse coordination, etc.). * Review, approve, and maintain complex electrical plans, models, and records, ensuring compliance with applicable standards, codes, and NERC reliability requirements. * Oversee updates to electrical maps, as-built drawings, and system documentation. * Plan, coordinate, and manage assigned capital improvement projects (CIP) to ensure adherence to specifications, timelines, and budgets. * Develop detailed project plans, monitor progress, and provide regular status and cost reports. * Coordinate with consultants, contractors, utilities, developers, and internal crews to ensure project efficiency and cost effectiveness. * Maintain full accountability for project budgets, schedules, staffing, and resources. * Recommend and implement system operating procedures. * Monitor system performance, reliability, and cost effectiveness. * Conduct field inspections, testing, and troubleshooting for operational and power quality issues. * Support construction management, inventory, and field operations as needed. * Supervise and train assigned personnel, including scheduling, workload management, performance evaluation, and discipline when required. * Assist in staffing decisions and may serve as Acting Operations Manager when needed. * Participate in departmental strategic planning and recommend projects to enhance system integrity and efficiency. * Develop and maintain policies, procedures, and construction/reliability standards to support consistent project and operational quality. * Ensure compliance with all regulatory and safety standards. * Perform related duties and support lower-level staff as required. What are the minimum qualifications? (Please click the links below for the full classification specifications.) Provo City will honor equivalent combinations of job-related education/experience [substituting each 1 year of post-secondary education/training for 6 months of experience] as meeting minimum qualifications. At All Levels * Bachelor's Degree in Electrical Engineering or closely related field. * A valid, lawful Driver License is required. Level II * Three years of experience at Systems Electrical Engineer I level. * Fundamentals of Engineering (FE) certificate. Senior * Four years of experience at Systems Electrical Engineer II level. * State Professional Engineer license is required (State of Utah within one year). What is the selection process? This position is open until filled and will be closed when sufficient, qualified applications to proceed with a competitive selection process have been received (at least seven days). Applications will be reviewed in the order they are submitted. Applicants must meet the minimum qualifications listed above to be eligible for consideration. If selected for hire, candidate will be required to successfully pass a drug screen and criminal background check. Non-disclosure may result in dismissal. Applicants with unsatisfactory drug screen results will be ineligible for appointment or application to any Provo City position for a minimum period of six (6) months. Why Provo City? Provo City has a vision for continued prosperity based on citizen priorities. To deliver on those priorities, the Administration developed a brand promise to establish the high standards of our community identifies as the Provo Pillars: Welcoming, Safe and Sound, Economically Vibrant, and Forward Looking, together we are building a strong foundation for a community that is honored both nationally and locally. Provo is consistently recognized nationally for its outstanding quality of life, well-being, and as a beautiful place to live. Provo has been awarded the "Best Performing City" three years in a row, and we were ranked the 'Best Run City in America' by WalletHub for 2025. Visit provo.gov to learn more! Provo City is an Equal Employment Opportunity employer. Full Time/Part Time: Full time Position Type: Regular Scheduled Hours: 40

Systems Electrical Engineer (II-Sr.) [Applications will be considered in the order they are submitted.] Provo City is looking for a full-time Utility Electrical Engineer to provide professional engineering work responsible to coordinate, plan, design, estimate, and prepare specifications for building electrical distribution/transmission systems in Provo City's Energy department. Civic-minded individuals interested in supporting these services provided to the residents of Provo City are strongly encouraged to apply. Job Details What is the compensation? (G37, G40) $90,592 - $144,567 per annum (depending on experience) Provo City offers generous employer-paid health insurance; retirement and pension plans, including 401k and 401k matching; paid leaves, including vacation, sick, holidays, bereavement, and parental leaves; educational assistance; competitive pay; and regular review of compensation practices to remain competitive with the market. Employees also receive great perks: free use of the Provo Recreation Center and Peaks Ice Arena, a Provo Library card, 50% off green fees at Timpanogos Golf Course, a 4/10 work schedule , and others. For more information about benefits click here. What are the main duties? Prepare specifications and perform engineering design for electrical systems, including transmission and distribution lines, substations, and related facilities. Conduct electrical system analyses and studies (load flow, short circuit, load forecasting, relay and fuse coordination, etc.). Review, approve, and maintain complex electrical plans, models, and records, ensuring compliance with applicable standards, codes, and NERC reliability requirements. Oversee updates to electrical maps, as-built drawings, and system documentation. Plan, coordinate, and manage assigned capital improvement projects (CIP) to ensure adherence to specifications, timelines, and budgets. Develop detailed project plans, monitor progress, and provide regular status and cost reports. Coordinate with consultants, contractors, utilities, developers, and internal crews to ensure project efficiency and cost effectiveness. Maintain full accountability for project budgets, schedules, staffing, and resources. Recommend and implement system operating procedures. Monitor system performance, reliability, and cost effectiveness. Conduct field inspections, testing, and troubleshooting for operational and power quality issues. Support construction management, inventory, and field operations as needed. Supervise and train assigned personnel, including scheduling, workload management, performance evaluation, and discipline when required. Assist in staffing decisions and may serve as Acting Operations Manager when needed. Participate in departmental strategic planning and recommend projects to enhance system integrity and efficiency. Develop and maintain policies, procedures, and construction/reliability standards to support consistent project and operational quality. Ensure compliance with all regulatory and safety standards. Perform related duties and support lower-level staff as required. What are the minimum qualifications? (Please click the links below for the full classification specifications.) Provo City will honor equivalent combinations of job-related education/experience [substituting each 1 year of post-secondary education/training for 6 months of experience] as meeting minimum qualifications. At All Levels Bachelor's Degree in Electrical Engineering or closely related field. A valid, lawful Driver License is required. Level II Three years of experience at Systems Electrical Engineer I level. Fundamentals of Engineering (FE) certificate. Senior Four years of experience at Systems Electrical Engineer II level. State Professional Engineer license is required (State of Utah within one year). What is the selection process? This position is open until filled and will be closed when sufficient, qualified applications to proceed with a competitive selection process have been received (at least seven days). Applications will be reviewed in the order they are submitted. Applicants must meet the minimum qualifications listed above to be eligible for consideration. If selected for hire, candidate will be required to successfully pass a drug screen and criminal background check. Non-disclosure may result in dismissal. Applicants with unsatisfactory drug screen results will be ineligible for appointment or application to any Provo City position for a minimum period of six (6) months. Why Provo City? Provo City has a vision for continued prosperity based on citizen priorities. To deliver on those priorities, the Administration developed a brand promise to establish the high standards of our community identifies as the Provo Pillars: Welcoming, Safe and Sound, Economically Vibrant, and Forward Looking, together we are building a strong foundation for a community that is honored both nationally and locally. Provo is consistently recognized nationally for its outstanding quality of life, well-being, and as a beautiful place to live. Provo has been awarded the “Best Performing City” three years in a row, and we were ranked the ‘Best Run City in America' by WalletHub for 2025. Visit provo.gov to learn more! Provo City is an Equal Employment Opportunity employer. Full Time/Part Time: Full time Position Type: Regular Scheduled Hours: 40

Colby Co. is a midsize multi-discipline design firm specializing in electrical, mechanical, fire protection, structural, civil and architecture. Seventy employees strong, Colby Co. is noted for its commitment to technical and service excellence in a fun, flexible, rigorous work environment. Located in the vibrant small city of Portland, Maine, Colby Co. offers a balance of opportunities for working and living well. Colby Co. has been named to the “Best Places to Work in Maine” list consecutively for the last seven years, and as an “Emerging Professional Friendly Firm” by the New England Chapter of AIA for the last three years. We currently have an opening for an Electrical Designer with 5+ years of electrical design experience in a consulting engineering design firm setting. We are looking for a designer who can prepare plans and coordinate drawings for a broad range of electrical engineering designs including voltage design, power distribution, control, communication, lighting, and fire suppression systems. The successful candidate will bring a deep, successful track record of design and quality control. In addition to an outstanding technical skill set, they will be a quick, flexible thinker and problem-solver who is accustomed to working in fluid teams on tight deadlines. This position is a part of the Electrical Engineering Department. Additionally, Colby Co. offers mechanical, plumbing, fire protection, controls, structural, civil engineering and architecture with our in-house staff. You will have the opportunity to work on multidisciplinary design teams as many of our projects encompass more than one discipline. Projects range in size from $50,000 to $100M in construction value for State, Federal, Industrial and Commercial clients. Desired traits: • Associates Degree with a technical, electrical or design concentration • 5+ years of work experience in electrical design, or a related field • Proficiency in AutoCAD and/or Revit • Ability to coordinate with multiple design disciplines In addition to a comprehensive insurance and retirement benefits package, Colby Co. offers two paid volunteer days a year, paid educational reimbursement, summer hours, paid time off (PTO), flex time, ability to work remotely, and company outings. Colby Co. is an Equal Employment Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

OPEN COMPETITIVE RECRUITMENT Open to all qualified candidates. Tentative examination dates for this recruitment: TBA Dates may change due to unforeseen circumstances. Candidates who pass each phase of the recruitment process will be notified of the official examination dates. Under direction, to manage and perform professional electrical engineering work in the design and planning of electrical generation, transmission, and distribution systems, or operation of an electric utility; to be responsible for electrical engineering projects; and perform related work as required. Plans, directs and schedules the work of para-professional electrical engineers; manages and is responsible for advanced project management including: research, planning, design, cost estimation and budget management; confers with electrical contractors, and consulting engineers; prepares or directs preparation and checking of construction drawings, specifications and materials lists for electric generation, transmission and distribution facilities; acts as a liaison between customers and the utility; understands and explains billing components to customers and staff; researches new technology and makes recommendations to improve customer and utility operations; performs system load flow, stability, and short circuit studies; prepares complex calculations for transmission and distribution system relay settings and voltage regulation problems; performs economic analysis and studies of alternative approaches to the additions to electrical power system; forecasts electric system load; directs the preparation of data for reports to governmental and industrial agencies; prepares and maintains accurate reports and records, both manually and electronically; directs, assigns and evaluates work; supervises, trains, and evaluates employees; makes effective recommendations regarding hiring, promotions, transfers and disciplinary action as needed; drives on City business. Employment Standards: Knowledge of principles and practices of electrical engineering; principles and practices of project management; electrical utility distribution systems and equipment; principles and practices of sound personnel management and supervision. Skill in drafting and engineering-related drawing; operating modern computers and related software; independent judgement and decisions based on standard policy and procedures; personnel management and supervision. Ability to design and layout electrical engineering plans and programs; prepare and interpret electrical plans, specifications and wiring diagrams; plan and supervise the work of professional and technical personnel; prepare reports and studies relating to electrical engineering problems; make accurate computations in the electrical engineering fields; utilize computers in the performance of complex engineering and economic calculations; communicate effectively, both orally and in writing; establish and maintain effective working relationships with supervisors, fellow employees, and the public. Education/Training: Any combination of education and/or experience that has provided the knowledge, skills, and abilities necessary for acceptable job performance as determined by the City. Example combination includes, but is not limited to graduation from an accredited college or university with a Bachelor of Science degree in Electrical Engineering and four years of professional electrical engineeringexperience, including one year at the level of Electrical Engineering Associate II or equivalent. Note: A Bachelor of Science degree in an engineering or science field other than electrical engineering, but with upper class or professional level course work in electrical engineering may be qualifying. Registration as an Electrical Engineer in the State of California may be substituted for the education requirement. License & Certificates: A valid California Class "C" driver's license or equivalent at time of appointment. Desirable Qualifications: Registration as an Electrical Engineer in the State of California and certification as a Project Management Professional. Proficiency in AutoCAD.

State Water Project Aerial Tour 2021: ******************************************* is physically located in the Arden-Arcade area in Sacramento, CA. Join a team of highly motivated professionals that are doing exciting work! We hope you'll check out the Duties and Desirable Qualifications below and apply for this great career opportunity to join our State Water Project team and help deliver water to over 27 million Californians as well as contribute to protecting our environment and species conservation efforts. Why Choose Us: We own and operate our own facilities, which is the largest water and power delivery system in the United States. As owners and operators of our own infrastructure, we are empowered to make the right choices in design, detailing, and materials to ensure public safety and facility reliability. We are not driven by the cost-cutting measures or unrealistic expectations that you may find in the private sector. Instead, direct the operations and maintenance of the State Water Project to safely deliver and optimize the uses of available water with environmental sensitivity. At DWR, you will have the support of knowledgeable and helpful colleagues, robust training programs, and professional organizational memberships for your professional growth. Our large organization provides an opportunity for a long and promising career full of growth and opportunity. Duties: Under the general direction of the supervisor of the Transaction Analysis (TA) Unit, the incumbent will assist in engineering analysis, electrical operations reporting, and financial analysis. This includes the development and maintenance of the energy accounting system, cost allocation system, and other custom systems models. You will find additional information about the job in the Duty Statement. Minimum Requirements You will find the Minimum Requirements in the Class Specification. * ELECTRICAL ENGINEER Additional Documents * Job Application Package Checklist * Duty Statement Position Details Job Code #: JC-501373 Position #(s): ************-XXX Working Title: Electrical Engineer Classification: ELECTRICAL ENGINEER $6,488.00 - $7,735.00 A $7,428.00 - $9,296.00 B New to State candidates will be hired into the minimum salary of the classification or minimum of alternate range when applicable. # of Positions: 1 Work Location: Sacramento County Telework: Hybrid Job Type: Permanent, Full Time Department Information Division of Operations and Maintenance, Assistant Division Manager - Power Operations Management, Power Markets, Compliance, and Reporting Branch, Power Settlements Section, Transaction Analysis Unit, Sacramento Department of Water Resources (DWR) was established in 1956 by the California State Legislature. We manage California's water resources, systems, and infrastructure, including the State Water Project, in a responsible sustainable way. At DWR, we are embedding climate change response into every project we undertake. We have set standards to help evaluate how each project incorporates climate resilience principles and ensure consistency across the Department. Our mission is to sustainably manage the water resources of California, in cooperation with other agencies, to benefit the state's people and protect, restore, and enhance the natural and human environments. DWR also strives to create a trusting and welcoming workplace where employees embrace diverse viewpoints and treat each other with civility and respect. An important component of DWR's equal employment opportunity program centers around justice, diversity, equity, and inclusion. Department Website: ********************* Free virtual career consultation services including one-on-one DWR career consultations, application/resume review, tips for applying, and mock interviews, provided by DWR's Recruitment and Workforce Planning section can now be scheduled via *********************************** Special Requirements Must be available to work outside normal business hours, including overnight travel. Travel throughout the state of California will be required. Employee is required to successfully complete all safety training related to the functions of the job. All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences, and is free from discrimination. The Department of Water Resources is committed to its mission and employees, and we are grounded in our commitment to public safety. Regular, consistent, and predictable attendance is essential to the successful performance in this position. Under the provisions of the North American Electric Reliability Corporation Critical Infrastructure Protection Standard CIP-004 as part of the Energy Policy of 2005, this position has authorized cyber access to or unescorted physical access around critical cyber assets and is subject to a satisfactory background check prior to appointment and every seven years thereafter. Application Instructions Completed applications and all required documents must be received or postmarked by the Final Filing Date in order to be considered. Dates printed on Mobile Bar Codes, such as the Quick Response (QR) Codes available at the USPS, are not considered Postmark dates for the purpose of determining timely filing of an application. Final Filing Date: 1/6/2026 Who May Apply Individuals who are currently in the classification, eligible for lateral transfer, eligible for reinstatement, have list or LEAP eligibility, are in the process of obtaining list eligibility, or have SROA and/or Surplus eligibility (please attach your letter, if available). SROA and Surplus candidates are given priority; therefore, individuals with other eligibility may be considered in the event no SROA or Surplus candidates apply. Applications will be screened and only the most qualified applicants will be selected to move forward in the selection process. Applicants must meet the Minimum Qualifications stated in the Classification Specification(s). How To Apply Complete Application Packages (including your Examination/Employment Application (STD 678) and applicable or required documents) must be submitted to apply for this Job Posting. Application Packages may be submitted electronically through your CalCareer Account at ********************** When submitting your application in hard copy, a completed copy of the Application Package listing must be included. If you choose to not apply electronically, a hard copy application package may be submitted through an alternative method listed below: Address for Mailing Application Packages You may submit your application and any applicable or required documents to: Department of Water Resources Mailing Address Attn: Division of Human Resources P.O. Box 1079 Sacramento, CA 95812 Address for Drop-Off Application Packages You may drop off your application and any applicable or required documents at: Department of Water Resources Submit in Person Certification Desk 715 P Street, 7th floor Sacramento, CA 95814 08:00 AM - 04:30 PM Required Application Package Documents The following items are required to be submitted with your application. Applicants who do not submit the required items timely may not be considered for this job: * Current version of the State Examination/Employment Application STD Form 678 (when not applying electronically), or the Electronic State Employment Application through your Applicant Account at ********************** All Experience and Education relating to the Minimum Qualifications listed on the Classification Specification should be included to demonstrate how you meet the Minimum Qualifications for the position. * Resume is required and must be included. * Other - Cover Letter. * Statement of Qualifications - See Special Instructions for additional details. Applicants requiring reasonable accommodations for the hiring interview process must request the necessary accommodations if scheduled for a hiring interview. The request should be made at the time of contact to schedule the interview. Questions regarding reasonable accommodations may be directed to the EEO contact listed on this job posting. Desirable Qualifications In addition to evaluating each candidate's relative ability, as demonstrated by quality and breadth of experience, the following factors will provide the basis for competitively evaluating each candidate: It is desirable that the incumbent have experience or knowledge of California Independent System Operator (CAISO) energy markets and settlements, familiarity with the State Water Project (SWP) operations, proficiency in coding and scripting for data analysis and automation, strong ability to troubleshoot software and manage datasets, and experience with data management tools and best practices. Benefits Click here to read about the outstanding benefits offered to eligible employees. We have PLENTY of FREE parking. This position is located in the Arden Arcade area. Personal Leave Program 2025: Effective July 1, 2025, state employees are subject to temporary wage reductions in exchange for Personal Leave Program (PLP) accruals. The specific rate and hours earned were negotiated and agreed upon by each bargaining unit. The actual monetary impact of these temporary reductions can vary based on your bargaining unit and/or federal and state tax withholdings. For additional information please visit Human Resources Manual - CalHR. Contact Information The Hiring Unit Contact is available to answer questions regarding the position or application process. Hiring Unit Contact: Cynthia Pollard ************** **************************** Please direct requests for Reasonable Accommodations to the interview scheduler at the time the interview is being scheduled. You may direct any additional questions regarding Reasonable Accommodations or Equal Employment Opportunity for this position(s) to the Department's EEO Office. EEO Contact: Office of Civil Rights ************** ************************ California Relay Service: ************** (TTY), ************** (Voice) TTY is a Telecommunications Device for the Deaf, and is reachable only from phones equipped with a TTY Device. Special Instructions To be considered, submit a completed State application (STD. 678), cover letter, resume, and SOQ. Please reference SAP Position #50002099 and Job Control #501373 in the "examination(s) or job title(s) for which you are applying" section of your application. Cover Letter The Cover Letter should include a statement as to why you are interested in this position and highlight skills that are most applicable to the Duty Statement. Statement of Qualifications This is a (2-page maximum) separate typed document entitled Statement of Qualifications in Arial 12-point font that addresses the candidate's knowledge, skills, abilities, and experience as it relates to the job description. The following basis of eligibility will be considered: List eligibility, transfer, LEAP, reinstatement, and SROA/Surplus. Resumes, cover letters, and/or other attachments will not be accepted in lieu of a completed application. Click here to complete DWR's Recruitment Survey. This survey is for research purpose only and will not affect the application status. Examination/Assessment For more information about the State hiring process, click here. To learn more about how to get a State job, click here. List eligibility can be established by taking and passing the examination/assessment. Click the examination(s)/assessment(s) information link: ELECTRICAL ENGINEER Equal Opportunity Employer The State of California is an equal opportunity employer to all, regardless of age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding and related medical conditions), and sexual orientation. It is an objective of the State of California to achieve a drug-free work place. Any applicant for state employment will be expected to behave in accordance with this objective because the use of illegal drugs is inconsistent with the law of the State, the rules governing Civil Service, and the special trust placed in public servants.

Under direction of the Senior Hydroelectric Power Utility Engineer, the incumbent assists the engineering staff in performing less complex field and office electrical and electronic engineering work; with training, performs electrical designing, drafting, and inspection work of average difficulty; and does other related work. You will find additional information about the job in the Duty Statement. Minimum Requirements You will find the Minimum Requirements in the Class Specification. * ELECTRICAL ENGINEER Additional Documents * Job Application Package Checklist * Duty Statement Position Details Job Code #: JC-500387 Position #(s): ************-007 Working Title: ELECTRICAL ENGINEER Classification: ELECTRICAL ENGINEER $6,488.00 - $7,735.00 A $7,428.00 - $9,296.00 B New to State candidates will be hired into the minimum salary of the classification or minimum of alternate range when applicable. # of Positions: 1 Work Location: Contra Costa County Telework: In Office Job Type: Permanent, Full Time Department Information Division of Operations and Maintenance, Delta Field Division, Engineering Branch, Electrical/Mechanical Engineering Section, Byron Department of Water Resources (DWR) was established in 1956 by the California State Legislature. We manage California's water resources, systems, and infrastructure, including the State Water Project, in a responsible sustainable way. At DWR, we are embedding climate change response into every project we undertake. We have set standards to help evaluate how each project incorporates climate resilience principles and ensure consistency across the Department. Our mission is to sustainably manage the water resources of California, in cooperation with other agencies, to benefit the state's people and protect, restore, and enhance the natural and human environments. DWR also strives to create a trusting and welcoming workplace where employees embrace diverse viewpoints and treat each other with civility and respect. An important component of DWR's equal employment opportunity program centers around justice, equity, diversity, and inclusion. Department Website: ********************* Free virtual career consultation services including one-on-one DWR career consultations, application/resume review, tips for applying, and mock interviews, provided by DWR's Recruitment and Workforce Planning section can now be scheduled via *********************About/Careers. Special Requirements Must have ability to ascend/descend stairs, slopes and ladders to enter or exit vaults and structures as required for equipment access. Must possess a valid California Driver's License, class C, and operate vehicles on public roadways or travel to remote areas. Ability to move 30 pounds. Employee is required to successfully complete all safety training related to the functions of the job. All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences, and is free from discrimination. Must be capable of operating a personal computer as use of word processor, spreadsheet, database and cad software is necessary to perform the requirements of this position. Under the provisions of the North American Electric Reliability Corporation Critical Infrastructure Protection Standard CIP-004 as part of the Energy Policy of 2005, this position has authorized cyber access to, and/or unescorted physical access around, critical cyber assets and is subject to a satisfactory background check prior to appointment and every seven years thereafter. This position is not eligible for telework. Application Instructions Completed applications and all required documents must be received or postmarked by the Final Filing Date in order to be considered. Dates printed on Mobile Bar Codes, such as the Quick Response (QR) Codes available at the USPS, are not considered Postmark dates for the purpose of determining timely filing of an application. Final Filing Date: 1/9/2026 Who May Apply Individuals who are currently in the classification, eligible for lateral transfer, eligible for reinstatement, have list or LEAP eligibility, are in the process of obtaining list eligibility, or have SROA and/or Surplus eligibility (please attach your letter, if available). SROA and Surplus candidates are given priority; therefore, individuals with other eligibility may be considered in the event no SROA or Surplus candidates apply. Applications will be screened and only the most qualified applicants will be selected to move forward in the selection process. Applicants must meet the Minimum Qualifications stated in the Classification Specification(s). How To Apply Complete Application Packages (including your Examination/Employment Application (STD 678) and applicable or required documents) must be submitted to apply for this Job Posting. Application Packages may be submitted electronically through your CalCareer Account at ********************** When submitting your application in hard copy, a completed copy of the Application Package listing must be included. If you choose to not apply electronically, a hard copy application package may be submitted through an alternative method listed below: Address for Mailing Application Packages You may submit your application and any applicable or required documents to: Department of Water Resources Mailing Address Attn: Division of Human Resources P.O. Box 1079 Sacramento, CA 95812 Address for Drop-Off Application Packages You may drop off your application and any applicable or required documents at: Department of Water Resources Submit in Person Certification Desk 715 P Street, 7th floor Sacramento, CA 95814 08:00 AM - 04:30 PM Required Application Package Documents The following items are required to be submitted with your application. Applicants who do not submit the required items timely may not be considered for this job: * Current version of the State Examination/Employment Application STD Form 678 (when not applying electronically), or the Electronic State Employment Application through your Applicant Account at ********************** All Experience and Education relating to the Minimum Qualifications listed on the Classification Specification should be included to demonstrate how you meet the Minimum Qualifications for the position. * Resume is required and must be included. Applicants requiring reasonable accommodations for the hiring interview process must request the necessary accommodations if scheduled for a hiring interview. The request should be made at the time of contact to schedule the interview. Questions regarding reasonable accommodations may be directed to the EEO contact listed on this job posting. Desirable Qualifications In addition to evaluating each candidate's relative ability, as demonstrated by quality and breadth of experience, the following factors will provide the basis for competitively evaluating each candidate: * Experience preparing and reviewing as-built plans, specs, charts, maps and diagrams * Experience with instrumention components including relays, programmable logic controllers, sensors & transducers, etc * Experience with electrical inspections * Experience making engineering calculations * Experience with preventative maintenance activities on electrical equipment and systems * Experience preparing engineering reports * Knowledge of power generation or transmission * Knowledge of Hydro structures * Experience or knowledge of CAD (AutoCAD, Microstation, Solidworks, etc.) * Knowledge of generating and/or pumping plant equipment such as transformers, power circuit breakers, motors, pumps & hydraulics, etc * Experience providing recommendations for corrective actions * Experience reviewing testing of electrical and mechanical equipment * Experience preparing plans, technical specifications, schedules and cost estimates The successful candidate should have the ability to work cooperatively and collaboratively with others, maintain consistent and reliable attendance, and have excellent judgment. They should also be able to effectively communicate both verbally and in writing, and work proactively to analyze situations and take effective action to complete projects on time and within budget. Benefits Click here to read about the outstanding benefits offered to eligible employees. We offer full medical, dental, and vision benefits, as well as a retirement plan. Personal Leave Program 2025: Effective July 1, 2025, state employees are subject to temporary wage reductions in exchange for Personal Leave Program (PLP) accruals. The specific rate and hours earned were negotiated and agreed upon by each bargaining unit. The actual monetary impact of these temporary reductions can vary based on your bargaining unit and/or federal and state tax withholdings. For additional information please visit Human Resources Manual - CalHR Contact Information The Hiring Unit Contact is available to answer questions regarding the position or application process. Hiring Unit Contact: Eleanor Matuu ************** ************************** Please direct requests for Reasonable Accommodations to the interview scheduler at the time the interview is being scheduled. You may direct any additional questions regarding Reasonable Accommodations or Equal Employment Opportunity for this position(s) to the Department's EEO Office. EEO Contact: Office of Civil Rights ************** ************************ California Relay Service: ************** (TTY), ************** (Voice) TTY is a Telecommunications Device for the Deaf, and is reachable only from phones equipped with a TTY Device. Special Instructions To be considered, submit a completed State application (STD. 678) and resume online or to the address listed below. Please reference SAP Position #50002080 and Job Control #JC-500387 in the "examination(s) or job title(s) for which you are applying" section of your application. The following basis of eligibility will be considered: List eligibility, transfer, LEAP, reinstatement, and SROA/Surplus. Resumes, cover letters, and/or other attachments will not be accepted in lieu of a completed application. Click here to complete DWR's Recruitment Survey. This survey is for research purpose only and will not affect the application status. Examination/Assessment For more information about the State hiring process, click here. To learn more about how to get a State job, click here. List eligibility can be established by taking and passing the examination/assessment. Click the examination(s)/assessment(s) information link: ELECTRICAL ENGINEER Equal Opportunity Employer The State of California is an equal opportunity employer to all, regardless of age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding and related medical conditions), and sexual orientation. It is an objective of the State of California to achieve a drug-free work place. Any applicant for state employment will be expected to behave in accordance with this objective because the use of illegal drugs is inconsistent with the law of the State, the rules governing Civil Service, and the special trust placed in public servants.

RK&K is seeking an experienced and licensed Electrical or Controls System Project Engineer. to assist with electrical and instrumentation/control (I&C) design efforts for water and wastewater infrastructure projects. This is an exciting opportunity for an engineering professional with a background in treatment plant upgrades, pump stations, and related systems. Essential Functions Work with electrical and I&C design team for water/wastewater projects including treatment plants and pump stations Design, size, and specify electrical and I&C equipment Conduct technical evaluations and support planning and design of electrical and control systems Prepare and review technical memoranda, proposals, reports, drawings, specifications, and contract documents Provide field services and support investigations as needed Assist with documentation and support for facility startup and commissioning Collaborate with clients, utility owners, and multidisciplinary project teams Develop detailed engineering cost estimates Travel occasionally for short durations as required Required Skills and Experience Bachelor's degree in electrical engineering or a closely related field Active Professional Engineer (P.E.) license in Electrical and Control System 4+ years of progressive experience in electrical or I&C systems design, construction, and commissioning for water and wastewater facilities Control panel design and instrumentation selection PLC and SCADA systems design Electrical/I&C drawings development Piping and instrumentation diagrams (P&IDs) development Microsoft Office Suite (Word, Outlook, Project, Excel, PowerPoint) AutoCAD, SCADA systems including PLCs, HMI software, servers, and workstations Familiarity with the National Electrical Code (NEC) and NFPA 820 codes Strong technical writing and communication abilities Excellent organizational and documentation skills Ability to work independently and collaboratively Problem-solving mindset with a focus on practical solutions Other Duties This job description indicates the general nature and levels of work, knowledge, skills, abilities, and other essential functions (as covered under ADA). It is not designed to cover or contain a comprehensive listing of all activities and duties required by the employee. Other duties are assigned as required . What We Offer RK&K provides outstanding opportunities for career growth and professional development, along with a competitive compensation and benefits package, including: Paid time off and holidays Hybrid work options (home and office) Tuition reimbursement Comprehensive health, dental, vision, life, and disability insurance 401(k) with company match And much more! Why RK&K? RK&K is a trusted, full-service engineering and construction management firm with over 100 years of excellence. Our award-winning culture fosters collaboration, innovation, and community impact. We deliver successful outcomes through trusted partnerships and responsive service. Design your career at RK&K, Apply Today!

RK&K is seeking an experienced and licensed Electrical or Controls System Project Engineer. to assist with electrical and instrumentation/control (I&C) design efforts for water and wastewater infrastructure projects. This is an exciting opportunity for an engineering professional with a background in treatment plant upgrades, pump stations, and related systems. Essential Functions Work with electrical and I&C design team for water/wastewater projects including treatment plants and pump stations Design, size, and specify electrical and I&C equipment Conduct technical evaluations and support planning and design of electrical and control systems Prepare and review technical memoranda, proposals, reports, drawings, specifications, and contract documents Provide field services and support investigations as needed Assist with documentation and support for facility startup and commissioning Collaborate with clients, utility owners, and multidisciplinary project teams Develop detailed engineering cost estimates Travel occasionally for short durations as required Required Skills and Experience Bachelor's degree in electrical engineering or a closely related field Active Professional Engineer (P.E.) license in Electrical and Control System 4+ years of progressive experience in electrical or I&C systems design, construction, and commissioning for water and wastewater facilities Control panel design and instrumentation selection PLC and SCADA systems design Electrical/I&C drawings development Piping and instrumentation diagrams (P&IDs) development Microsoft Office Suite (Word, Outlook, Project, Excel, PowerPoint) AutoCAD, SCADA systems including PLCs, HMI software, servers, and workstations Familiarity with the National Electrical Code (NEC) and NFPA 820 codes Strong technical writing and communication abilities Excellent organizational and documentation skills Ability to work independently and collaboratively Problem-solving mindset with a focus on practical solutions Other Duties This job description indicates the general nature and levels of work, knowledge, skills, abilities, and other essential functions (as covered under ADA). It is not designed to cover or contain a comprehensive listing of all activities and duties required by the employee. Other duties are assigned as required . What We Offer RK&K provides outstanding opportunities for career growth and professional development, along with a competitive compensation and benefits package, including: Paid time off and holidays Hybrid work options (home and office) Tuition reimbursement Comprehensive health, dental, vision, life, and disability insurance 401(k) with company match And much more! Why RK&K? RK&K is a trusted, full-service engineering and construction management firm with over 100 years of excellence. Our award-winning culture fosters collaboration, innovation, and community impact. We deliver successful outcomes through trusted partnerships and responsive service. Design your career at RK&K, Apply Today!

Powell is a dynamic and innovative company that values collaboration, technical excellence, and professional growth. As an Electrical Engineer, you will elevate your career and make a significant impact by leading projects that craft cutting-edge solutions for diverse clients. At Powell, an Electrical Engineer holding a minimum of a bachelor's degree in electrical engineering, or a related engineering discipline with a focus on power and or control systems, will be the “technical face” on projects from concept to completion. You will be working with clients to design custom PLC, SCADA, HMI, RTU, and relay control panels to meet their technical specifications and quality standards within the constraints of the budget and the schedule. Additionally, an Electrical Engineer will learn industry standards and trends. Finally, you will join a team that fosters a supportive environment, continuous learning and development where your expertise will not only be appreciated but recognized and rewarded. Essential Responsibilities Design standard jobs with guidance to match client specifications and requirements Draft electrical construction drawings using AutoCAD in conjunction with our wiring teams Gain design knowledge to engineer various control and relay panels Work with your Supervisor and the Project Management team to help interpret project write-ups, client specifications, drawings, and other correspondence during the life of the project Create and validate Bills of Materials for client submittal and approval per Powell Standards Complete self-design reviews to verify accuracy and completeness of designs before issuing projects to Powell's manufacturing floor for construction Gain the ability to provide technical support in client meetings Coordinate with purchasing and suppliers to specify & approve component parts and assemblies Provide prompt notification to supervisor and project management for issues that impact scope, budget, and schedule Coordinate with the electrical design team for the final design and construction package to include schematics and wiring diagrams of the project Create AC and DC schematics, door component layouts, wiring diagrams, and communication drawings for project approval, construction and As-Built's drawing submittals Provide technical support as necessary for sales, application engineering, and inspection teams throughout the life of the project Assist fellow production engineers in solving problems on a daily basis Adhere to Powell's policies and procedures, work instructions, ISO policies, Safety Rules and Regulations Meet regularly with clients, suppliers and OEMs Required Experience Is Proportionate With the Selected Job Level The Engineer level requires a Bachelor's degree in an engineering discipline and 0-3 years of relevant job related experience The Senior Engineer level requires a Bachelor's degree in an engineering discipline and 4-8 years of relevant job related experience The Lead Engineer level requires Bachelor's degree in an engineering discipline and 7-10 years of relevant job related experience Minimum Qualifications BS Degree in Electrical Engineering, Electrical Technology or related area Minimum 1-3 years of experience in an Engineering role Ability to draft in AutoCAD Proficient with electrical design in PLC, SCADA, and relay control panels Basic understanding of power system, SCADA system, communications, and relay applications as applied to products Preferred Qualifications Previous experience with control panels Skills, Abilities & Other Requirements Ability to manage & prioritize multiple projects, schedules and budgets in a fast-paced environment Solid organization, communication, presentation and planning skills Ability to carry out engineering development types of tasks and address production issues Demonstrated ability to work collaboratively with others in a cross-functional team environment Strong problem-solving skills, and the ability to troubleshoot system-level problems Basic understanding of communication drawings and point to point wiring diagrams Basic understanding to being very proficient with power distribution equipment (switchgear relays, PCR, E-Houses, etc.) Able to apply applicable sections of the National Electric Code and other codes and standards such as IEEE, ANSI and UL in day-to-day activities Able to form and apply cost competitive techniques to develop the most cost-effective solution for the engineered to order product Possess a strong customer service commitment Basic understanding to being very proficient at drawing reviews (i.e., acquired knowledge of specification items that Powell should take exception to and specification items that require special attention; able to accurately interpret client specifications, etc.) Working & Environmental Conditions The employee typically performs duties in a normal office environment. There will be some work in a shop environment and exposure to the elements of our shop. Additionally there may be some work performed in the field with exposure to construction sites or active customer facilities. It is the policy of Powell Industries to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel, carry or operate objects, tools or controls and reach with hands and arms. The employee frequently is required to stand; talk or hear; walk; sit. Specific vision abilities required by this job include close vision and the ability to adjust focus. More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties #LI-BH3

Brown and Caldwell (BC) has an exciting opportunity for a Mid-Level Electrical Engineer to join our growing team. Low and Medium Voltage power distribution, Controls, and Instrumentation Design, are services in high demand from our clients. This is an extraordinary opportunity for a mid-level engineer to continue to build upon their engineering career, do challenging and meaningful work, and protect the earth's resources at the same time. Hybrid work from one of our offices in Phoenix, Irvine, Las Vegas, Los Angeles, or San Diego is allowed. Detailed Description: For the right candidate, this position offers the opportunity for significant professional growth and the potential to collaborate with local and national teams. The candidate will have a broad range of responsibilities, which includes interacting with clients, leading electrical projects, and participating in new business development. In this role, your primary design delivery responsibilities will include conceptual design development, layout and selection of equipment, development of contract drawings using 2D and 3D design approaches, bid package preparation, field investigations, electrical and I&C design, and support during construction both in the office and in the field. We are looking for candidates who have a passion for building things, meeting new people, and desire to work with seasoned professionals who perform industrial, municipal, and other water/wastewater related work. Job Responsibilities Expectations: * Serve as a project task manager or perform as lead discipline (electrical and I&C) person on projects as appropriate. * Scope and budget projects, identify method of project execution and coordinate staff assignments. * Successfully manage and execute electrical design and be on time and on budget using company systems and tools. * Support business opportunities and assist in sales and marketing efforts (proposal preparation, interviewing, scope, fee, etc.). * Mentor and possibly supervise other electrical and I&C engineers and designers. * Perform contractor construction submittal reviews and Request For Information (RFI) documents and general electrical design activities for plant and pump station power systems. * Producing effective and accurate written documents, reports, and technical memorandums. * Collaborate with a national team of technical experts in the Electrical and I&C group. * Ability to travel occasionally to project sites and for client meeting both locally and out of Desired Skills and Experience: * BS in Electrical Engineering. * Professional registration. * Minimum of 5 years' experience as an Electrical Engineer working for government, municipal, and/or industrial water and wastewater industries preferred. * Experience in electrical power systems design and specifications, which include service entrance, feeder and branch circuits, lighting, grounding, power distribution and standby power equipment, and associated systems studies and calculations. * Solid knowledge in the application of the National Electrical Code. * Solid knowledge and understanding of electrical safety , NFPA 70E. * Effective oral and written communication. * Able to multi-task, be enthusiastic, be self-motivated, and work independently with a willingness to learn. * Candidate should be a self-starter, results-oriented, take ownership of their work, and be able to work under tight and pressured deadlines from time to time. Salary Range: The anticipated starting pay range for this position is based on the employee's primary work location and may be more or less depending upon skills, experience, and education. These ranges may be modified in the future. Location A: $97,000- $132,000 Location B: $106,000- $145,000 You can view which BC location applies to you here. If you have any questions, please speak with your Recruiter. Benefits and Other Compensation: We provide a comprehensive benefits package that promotes employee health, performance, and success which includes medical, dental, vision, short and long-term disability, life insurance, an employee assistance program, paid time off and parental leave, paid holidays, 401(k) retirement savings plan with employer match, performance-based bonus eligibility, employee referral bonuses, tuition reimbursement, pet insurance and long-term care insurance. Click here to see our full list of benefits. About Brown and Caldwell Headquartered in Walnut Creek, California, Brown and Caldwell is a full-service environmental engineering and construction firm with 50 offices and 2,100 professionals across North America and the Pacific. For 75 years, we have created leading-edge environmental solutions for municipalities, private industry, and government agencies. We strive to be the company of choice-to our clients, who benefit from our passion for delivering exceptional quality, and to our employees, present and future, who share our commitment to client service, collaboration, and innovation. Join us, and you will find a home where you can do your best work, reach new levels of expertise, and enjoy exceptional development opportunities. For more information, visit ************************ This position is subject to a pre-employment background check and a pre-employment drug test. Notice to Third Party Agencies: Brown and Caldwell does not accept unsolicited resumes from recruiters or employment agencies. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement and approved engagement request with Brown and Caldwell, Brown and Caldwell reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Brown and Caldwell is proud to be an EEO/AAP Employer. Brown and Caldwell encourages protected veterans, individuals with disabilities, and applicants from all backgrounds to apply. Brown and Caldwell ensures nondiscrimination in all programs and activities in accordance with Title VI of the Civil Rights Act

Highly skilled position to design, program, and maintain automation systems that enhance operational efficiency, minimize manual intervention, and deliver unwavering reliability. In this critical role, you'll implement safe and compliant automation solutions, support SCADA systems, and collaborate with System Operations teams to maintain performance, security, and scalability. This position requires strong knowledge of North American Electric Reliability Corporation (NERC) standards, Critical Infrastructure Protection (CIP), and Critical Energy/Electric Infrastructure Information (CEII). This position reports directly to System Operations Center Manager. Examples of Duties ESSENTIAL DUTIES AND RESPONSIBILITIES 1. Resource Management: Ensures necessary resources are available for supervising and controlling the electric power grid, associated networks, and meeting regulatory requirements. 2. Regulatory Compliance: Ensure SCADA systems comply with industry standards, cybersecurity requirements, and regulatory guidelines. 3. Documentation: Create and maintain comprehensive documentation, including design specifications, user manuals, and operational guides, to ensure accurate and consistent information. 4. Substation Automation & Relay Integration: Configure, program, and maintain SEL RTUs, RTACs, and protective relays. Implement and validate logic, point mapping, and communications between IEDs, RTYs, and SCADA. Support relay settings coordination, logic review, and event/fault data analysis. 5. Field testing & Commissioning: Perform FAT/SAT, field commissioning, and functional verification of automation and relay devices. 6. Policy Development & Reporting: Develop policies and procedures, prepare technical reports to enhance system improvements, quality control, and regulatory adherence. 7. Emergency Response: Availability during after-hour emergencies, demonstrating a strong commitment to our operational response with senior-level preparation to ensure a swift and effective response to critical situations. Perform any other related duties as required or assigned. Minimum Qualifications QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty mentioned satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. EDUCATION AND EXPERIENCE * A four-year degree from an accredited institution with significant coursework in electrical, controls, automation, or a related engineering field, coupled with five years of progressively responsible experience in SCADA system design, implementation, and maintenance, or an equivalent combination of education and relevant training. * Additional experience should include hands-on commissioning and troubleshooting of SEL relays and RTUs/RTACs, proficiency in SEL configuration tools (such as ac SELerator RTAC and Diagram Builder), and a strong understanding of industrial communication protocols (e.g., DNP3, Modbus). * Familiarity with substation networking, secure remote access, and scripting or programming for automation tasks (e.g., Python) is preferred. * Experience working closely with control room or operations environments is considered a strong advantage. REQUIRED CERTIFICATES, LICENSES, REGISTRATIONS * Must possess a valid Florida Driver's License with an acceptable driving record. PREFERRED CERTIFICATES, LICENSES, REGISTRATIONS * Completion of advanced training or certification in IEC 61850, along with demonstrated knowledge of NERC CIP compliance requirements for low-impact systems. * SEL vendor training or certifications are preferred. * Professional Engineer (PE) license, or the ability to obtain one, is considered a plus. * Certification in cybersecurity or OT security disciplines (such as GICSP or CISSP) is desirable. RESIDENCY REQUIREMENT The employee must, within one year of date of hire or promotion to this position, reside and remain within 45 minutes of the assigned work facility. Supplemental Information SUPERVISORY RESPONSIBILITIES If applicable, supervisory responsibilities include interviewing, hiring and training employees; planning, assigning and directing work; appraising performance, rewarding and disciplining employees; addressing complaints and resolving problems. ANALYTICAL ABILITY / PROBLEM SOLVING OVERSIGHT. Activities covered by expansive policies and objectives, and oversight as to execution and review. PLANNING With regard to general assignments in planning time, method, manner and/or sequence of performance of own work. CONSIDERABLE RESPONSIBILITY; may also occasionally assist in the planning of work assignments performed by others within a limited area of operation. DECISION MAKING Performs work operations which permit opportunity for decision-making of minor importance. FREQUENTLY; Performs work operations which permit opportunity for decision-making of major importance. FREQUENTLY; COMMUNICATION SKILLS Ability to read, analyze, and understand common scientific and technical journals, financial reports, and legal documents; Ability to respond to complex or difficult inquiries or complaints. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ration, and percent and to prepare and interpret bar graphs. CRITICAL THINKING SKILLS Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret and extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. SUPERVISION RECEIVED Under general direction, WORKING FROM POLICIES AND GENERAL DIRECTIVES. RARELY REFERS SPECIFIC CASES TO supervisor unless clarification or interpretation of the organization's policy is required. MENTAL DEMAND COMPREHENSIVE AND VERY INTENSEMENTAL; Comprehensive and continual involvement with multiple divisions, departments and/or organizations. Strategic and operational management functions which relate to both the short-term and long-term time periods. USE OF MACHINES, EQUIPMENT AND/OR COMPUTER Highest level of network engineering, subject matter experts and telecom engineering and/or comprehensive information system management executive for Information Systems or Information Technology operations. ACCURACY Probable errors of internal and external scope would have a moderate effect on the operational efficiency of the organizational component concerned. Errors might possibly go undetected for a considerable period of time. PUBLIC CONTACT Frequent contacts with general public, patrons, or other outside representatives, wherein the manner of handling these contacts has a bearing on the organization's position and operation. EMPLOYEE CONTACT Contacts occasionally with others beyond immediate associates, but generally of a routine nature. May obtain, present or discuss data, but only as it pertains to an immediate and specific assignment. SOFTWARE SKILLS REQUIRED Accounting Basic Alphanumeric Data Entry Advanced Contact Management Basic Database Advanced Enterprise Resource Planning Advanced Human Resources Systems Basic Payroll Systems Basic Presentation/PowerPoint Basic Programming Languages Advanced Spreadsheet Advanced Word Processing/Typing Advanced ADDITIONAL SOFTWARE SKILLS * SCADA (Supervisory Control and Data Acquisition), OMS (Outage Management System), and Microsoft Access. * Must possess excellent communication, documentation, and cross-functional collaboration skills, as well as a thorough understanding of network diagrams. * Must possess strong problem-solving mindset, attention to detail, and adaptability. * Project management experience-handling scope, scheduling, budgets, and delivery. * Strong commitment to continuous learning: staying current with automation trends and technologies. OTHER SKILLS * Must adapt priorities according to service demands and effectively meet multiple deadlines. Must remain composed in high-stress situations. * Proficiency in writing technical specifications. PHYSICAL ACTIVITIES While performing the functions of this job, the employee may be required to: Stand Regulary Walk Regularly Sit Regularly Use hands to handle or feel Regularly Reach with hands and arms Occasionally Climb or balance Occasionally Stoop, kneel, crouch or crawl Occasionally Talk or hear Regularly Taste or smell Occasionally WEIGHT LIFT REQUIREMENTS The employee must occasionally lift and/or move: * Up to 25 pounds VISION REQUIREMENT Specific vision abilities required by this job may include: * Color vision (interpreting color software screens or reports; work duties that require the ability to identify and distinguish colors). ENVIRONMENTAL CONDITIONS The following work environment characteristics described here are representative of those an employee encounters while performing essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work near moving mechanical parts (spinning shafts, engines, lifts, etc.) Occasionally Work in high, precarious places (tall structures, bucket lifts, extension ladders, etc.) Occasionally Fumes or airborne particles (painting, sanding, solvents, flying lint or dust particles, etc.) Occasionally Toxic or caustic chemicals (including potential for chemical spills, etc.) Never Outdoor weather conditions (exposure to outdoor heat, cold or inclement weather) Occasionally Wet or humid conditions (not weather-related, such as greenhouse, carwash, etc.) Occasionally Extreme cold (not weather-related, such as freezer, cold storage, etc.) Never Extreme heat not weather-related, such as furnace, kitchen, ovens, etc. where temp is regularly above 100 degrees F) Never Risk of electrical shock (live electrical wires, equipment that retains power after shutoff) Occasionally Work with explosives (TNT, dynamite, nitroglycerine or other related explosives) Never Risk of radiation (x-ray equipment, nuclear radiation, electromagnetic radiation, etc.) Never Vibration (jack hammer, soil compactor, equipment that creates high vibration, etc.) Occasionally The noise level in the work environment is usually Moderate (business office with computers/printers, light traffic, etc.) This is not necessarily an exhaustive list of all responsibilities, skills, duties, requirements, efforts, or working conditions associated with the job. While this is intended to be an accurate reflection of the current job, management reserves the right to revise the job or to require that other or different tasks be performed when circumstances change (e.g., emergencies, changes in personnel, workload, rush jobs, or technological developments). The City of Ocala provides a competitive, comprehensive benefit package for all full-time employees. Health Insurance We offer both single and family coverage, for employees working 30 or more hours per week. Dental Insurance For full time employees, we offer both single and family dental coverage. Vision Insurance For full time employees, we offer both single and family vision coverage. Life Insurance For full time employees, the City of Ocala provides Basic Life and Accidental Death and Dismemberments policies as an employer paid benefit. Employees can opt for additional coverage such as supplemental voluntary life, spouse life, dependent life, and child life. For full time employees, the City of Ocala provides Basic Life and Accidental Death and Dismemberments policies as an employer paid benefit. Employees can opt for additional coverage such as supplemental voluntary life, spouse life, dependent life, and child life. Short Term and Long Term Disability Offered to full time employees, STD and LTD coverages are income replacement benefits that assist policyholders who are unable to work for an extended period of time due to sickness or accidental injury. Medical FSA (Flexible Spending Account) and Dependent Care FSA Flexible spending accounts allow employees to pay out-of-pocket medical, dental, vision, and dependent care expenses using pre-tax dollars. Pet Insurance We also offer special pet insurance for your pets in the case of illness or accidents, as well as preventative care. Employee Health & Wellness Center The City of Ocala offers the use of the City Clinic for those employees, and covered dependents over the age of 8, which have elected one of our health insurance plans. Services offered by the City Clinic include primary care, chronic disease management, labs, x-rays, and wellness coaching. Voluntary Cancer Insurance For full time employees, the cancer insurance policy can help provide security if you, or a covered dependent, suddenly become diagnosed with cancer. Supplemental Critical Care Insurance Our full time employees have the option of electing critical care insurance that is available to help with medical expenses that could arise from things such as a heart attack or stroke. Supplemental Accident Insurance Also available to full time employees, is our Accident Coverage. This supplemental plan can be used to help with expenses like MRI's, physical therapy, and hospital admission. Legal Plan Insurance Full time employees can have access to local attorneys for a monthly fee and receive discounts on services such as legal consultation, wills, traffic violations and the purchase or sale of your home. The carrier also has a separate policy assisting with the matter of identity theft and social media monitoring. Deferred Compensation Plan Deferred compensation is available to all full-time employees at the time of employment. This benefit allows the employee to defer income without paying taxes until money is withdrawn. Current plan is administered through MissionSquare. Direct Deposit Direct deposit automatically deposits your net pay each pay period to your checking or savings account at your own financial institution. Direct deposit is a condition of employment for a person hired by the City. Each pay period the employee receives an earnings statement showing gross pay, taxes, other deductions, accruals and net pay. Enrollment forms are available at Human Resources or Payroll. Discounts - Theme Park Discounts are available to all non-temporary employees at the time of employment. Employee Assistance Program (EAP) The Employee Assistance Program is available to all full-time employees and members of your household as an employer paid benefit. The EAP offers emotional wellbeing support in the form as counseling sessions and all sessions are confidential. The EAP also provides daily life assistance, legal services, and financial services. Holidays and Paid Time off The City provides paid holidays and paid time off for full-time employees. Refer to the Employee Handbook for details. Retirement Plan All full-time employees hired after 10/01/2013, apart from Sworn Police Officers and Firefighters, are enrolled in the 401a Defined Contribution Retirement Plan with MissionSquare. All contributions to the 401a Defined contribution plan are pre-tax and earnings grow tax-deferred. The City contributes 8% and employees contribute 3%. City contributions are 100% vested after one year of employment. You will be enrolled automatically and should take time to review your investment options at your earliest convenience. Training Programs The City is committed to provide training programs for all departments and all positions. Risk Management conducts classes in Defensive Driving, Safety, and Insurance. With rare exceptions, classes are offered during working hours, and are open to all eligible employees. Tuition Reimbursement All regular, full-time employees are eligible to participate in the tuition reimbursement program. 01 Do you possess a valid State of Florida Operator Driver's License with an acceptable driving record OR If you possess a valid out of state license, do you have the ability to obtain a Florida driver's license prior to employment? * Yes * No 02 Do you understand that you must, within one year of date of hire or promotion, reside within 45 minutes of the assigned work facility? * Yes * No 03 Do you have a high school diploma or GED? * Yes * No 04 Please select the level of degree you possess from an accredited institution with significant coursework in electrical, controls, automation, or a related engineering field. * None * Associate Degree * Bachelor's Degree * Master's Degree or higher 05 Please select your level of progressively responsible experience in SCADA system design, implementation, and maintenance. * 3 years or less * 5 years * 7 years * 9 years or more 06 Do you possess additional experience for hands-on commissioning and troubleshooting of SEL relays and RTUs/RTACs, proficiency in SEL configuration tools (such as ac SELerator RTAC and Diagram Builder), and a strong understanding of industrial communication protocols (e.g., DNP3, Modbus)? * Yes * No 07 Do you possess familiarity with substation networking, secure remote access, and scripting or programming for automation tasks (e.g., Python)? * Yes * No 08 Do you possess experience working closely with control room or operations environments? * Yes * No 09 Please select the trainings, certificates and/or licenses you currently possess. * Completion of advanced training or certification in IEC 61850, along with demonstrated knowledge of NERC CIP compliance requirements for low-impact systems. * SEL vendor training or certifications. * Professional Engineer (PE) license. * Certification in cybersecurity or OT security disciplines (such as GICSP or CISSP) 10 Do you have the ability to obtain a Professional Engineer (PE) license? * Yes * No 11 Do you possess excellent communication, documentation, and cross-functional collaboration skills, as well as a thorough understanding of network diagrams? * Yes * No 12 Do you possess project management experience-handling scope, scheduling, budgets, and delivery? * Yes * No 13 Do you possess strong problem-solving mindset, attention to detail, and adaptability? * Yes * No 14 If you feel you qualify for this position due to an equivalent combination of training, education and experience, please explain below: 15 I understand and agree with the following statements: * All background, education and work history will be verified once an offer of employment has been extended and accepted. * Any false or incomplete answer may be grounds for not employing me or for dismissing me after I begin work. * Yes * No Required Question Employer City of Ocala Address 110 SE Watula Ave City Hall, 3rd Floor Ocala, Florida, 34471 Phone ************ Website ************************

Brown and Caldwell (BC) has an exciting opportunity for a Senior Electrical Engineer to join our growing team. Electrical equipment upgrades, arc flash hazards analysis, low and medium voltage plant power distribution system design, motor control centers, drives, wiring diagrams, and related equipment for plant power are services in high demand from our clients. This is an extraordinary opportunity for a mid-level engineer to continue to build upon their engineering career, do challenging and meaningful work, and protect the earth's resources at the same time. Hybrid work from one of our offices in the Bay area is allowed. Detailed Description: For the right candidate, this position offers the opportunity for significant professional growth and the potential to collaborate with local and national teams. The candidate will have a broad range of responsibilities, which includes interacting with clients, manage electrical projects, and participate in new business development. In this role, your design delivery responsibilities will include conceptual design development, layout and selection of equipment, development of contract drawings using 2D and 3D design approaches, bid package preparation, field investigations, electrical and I&C design, and support during construction both in the office and in the field. We are looking for candidates who have a passion for building things, meeting new people, and desire to work with seasoned professionals who perform industrial, municipal, and other water/wastewater related work. Primary responsibilities include: * Serve as a project task manager, or perform as lead discipline (electrical and I&C) person on projects as appropriate. * Scope and budget projects, identify method of project execution and coordinate staff assignments. * Successfully manage and execute electrical design and be on time and on budget using company systems and tools. * Support business opportunities and assist in sales and marketing efforts (proposal preparation, interviewing, scope, fee, etc.). * Perform contractor construction submittal reviews and request for information documents and general electrical design activities for plant and pump station power systems. * Producing effective and accurate written documents, reports, and technical memorandums. * Collaborate with a national team of technical experts in the Electrical and I&C group. Desired Skills and Experience: * BS in Electrical Engineering or related field. * Professional Engineer registration or the ability to obtain within 6 months. * Minimum of 10 years' experience as an Electrical Engineer working for government, municipal, and/or industrial water and wastewater industries preferred. * Experience in electrical power systems design and specification, which include service entrance, feeder and branch circuits, lighting, grounding, power distribution and standby power equipment, and associated systems studies and calculations. Experience in power system analysis and modelling software such as SKM and ETAP a plus. * Solid knowledge in the application of the National Electrical Code. * Solid knowledge and understanding of electrical safety systems, NFPA 70E. * Effective oral and written communication. * Able to multi-task, enthusiastic, self-motivated, and work independently with a willingness to learn. * Candidate should be a self-starter, results-oriented and be able to work under tight and pressured deadlines. Salary Range: The anticipated starting pay range for this position is based on the employee's primary work location and may be more or less depending upon skills, experience, and education. These ranges may be modified in the future. Location B: $117,000 - $160,000 Location C: $128,000 - $174,000 You can view which BC location applies to you here. If you have any questions, please speak with your Recruiter. Benefits and Other Compensation: We provide a comprehensive benefits package that promotes employee health, performance, and success which includes medical, dental, vision, short and long-term disability, life insurance, an employee assistance program, paid time off and parental leave, paid holidays, 401(k) retirement savings plan with employer match, performance-based bonus eligibility, employee referral bonuses, tuition reimbursement, pet insurance and long-term care insurance. Click here to see our full list of benefits. About Brown and Caldwell Headquartered in Walnut Creek, Calif., Brown and Caldwell is a full-service environmental engineering and construction firm with 50 offices and 2,100 professionals across North America and the Pacific. For more than 70 years, we have created leading-edge environmental solutions for municipalities, private industry, and government agencies. We strive to be the company of choice-to our clients, who benefit from our passion for delivering exceptional quality, and to our employees, present and future, who share our commitment to client service, collaboration, and innovation. Join us, and you will find a home where you can do your best work, reach new levels of expertise, and enjoy exceptional development opportunities. For more information, visit ************************ This position is subject to a pre-employment background check and a pre-employment drug test. Notice to Third Party Agencies: Brown and Caldwell does not accept unsolicited resumes from recruiters or employment agencies. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement and approved engagement request with Brown and Caldwell, Brown and Caldwell reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Brown and Caldwell is proud to be an EEO/AAP Employer. Brown and Caldwell encourages protected veterans, individuals with disabilities, and applicants from all backgrounds to apply. Brown and Caldwell ensures nondiscrimination in all programs and activities in accordance with Title VI of the Civil Rights Act

Brown and Caldwell (BC) has an exciting opportunity for a Senior Electrical Engineer to join our growing team. Electrical equipment upgrades, arc flash hazards analysis, low and medium voltage plant power distribution system design, motor control centers, drives, wiring diagrams, and related equipment for plant power are services in high demand from our clients. This is an extraordinary opportunity for a mid-level engineer to continue to build upon their engineering career, do challenging and meaningful work, and protect the earth's resources at the same time. Hybrid work from one of our offices in the Bay area is allowed. Detailed Description: For the right candidate, this position offers the opportunity for significant professional growth and the potential to collaborate with local and national teams. The candidate will have a broad range of responsibilities, which includes interacting with clients, manage electrical projects, and participate in new business development. In this role, your design delivery responsibilities will include conceptual design development, layout and selection of equipment, development of contract drawings using 2D and 3D design approaches, bid package preparation, field investigations, electrical and I&C design, and support during construction both in the office and in the field. We are looking for candidates who have a passion for building things, meeting new people, and desire to work with seasoned professionals who perform industrial, municipal, and other water/wastewater related work. Primary responsibilities include: * Serve as a project task manager, or perform as lead discipline (electrical and I&C) person on projects as appropriate. * Scope and budget projects, identify method of project execution and coordinate staff assignments. * Successfully manage and execute electrical design and be on time and on budget using company systems and tools. * Support business opportunities and assist in sales and marketing efforts (proposal preparation, interviewing, scope, fee, etc.). * Perform contractor construction submittal reviews and request for information documents and general electrical design activities for plant and pump station power systems. * Producing effective and accurate written documents, reports, and technical memorandums. * Collaborate with a national team of technical experts in the Electrical and I&C group. Desired Skills and Experience: * BS in Electrical Engineering or related field. * Professional Engineer registration or the ability to obtain within 6 months. * Minimum of 10 years' experience as an Electrical Engineer working for government, municipal, and/or industrial water and wastewater industries preferred. * Experience in electrical power systems design and specification, which include service entrance, feeder and branch circuits, lighting, grounding, power distribution and standby power equipment, and associated systems studies and calculations. Experience in power system analysis and modelling software such as SKM and ETAP a plus. * Solid knowledge in the application of the National Electrical Code. * Solid knowledge and understanding of electrical safety systems, NFPA 70E. * Effective oral and written communication. * Able to multi-task, enthusiastic, self-motivated, and work independently with a willingness to learn. * Candidate should be a self-starter, results-oriented and be able to work under tight and pressured deadlines. Salary Range: The anticipated starting pay range for this position is based on the employee's primary work location and may be more or less depending upon skills, experience, and education. These ranges may be modified in the future. Location B: $117,000 - $160,000 Location C: $128,000 - $174,000 You can view which BC location applies to you here. If you have any questions, please speak with your Recruiter. Benefits and Other Compensation: We provide a comprehensive benefits package that promotes employee health, performance, and success which includes medical, dental, vision, short and long-term disability, life insurance, an employee assistance program, paid time off and parental leave, paid holidays, 401(k) retirement savings plan with employer match, performance-based bonus eligibility, employee referral bonuses, tuition reimbursement, pet insurance and long-term care insurance. Click here to see our full list of benefits. About Brown and Caldwell Headquartered in Walnut Creek, Calif., Brown and Caldwell is a full-service environmental engineering and construction firm with 50 offices and 2,100 professionals across North America and the Pacific. For more than 70 years, we have created leading-edge environmental solutions for municipalities, private industry, and government agencies. We strive to be the company of choice-to our clients, who benefit from our passion for delivering exceptional quality, and to our employees, present and future, who share our commitment to client service, collaboration, and innovation. Join us, and you will find a home where you can do your best work, reach new levels of expertise, and enjoy exceptional development opportunities. For more information, visit ************************ This position is subject to a pre-employment background check and a pre-employment drug test. Notice to Third Party Agencies: Brown and Caldwell does not accept unsolicited resumes from recruiters or employment agencies. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement and approved engagement request with Brown and Caldwell, Brown and Caldwell reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Brown and Caldwell is proud to be an EEO/AAP Employer. Brown and Caldwell encourages protected veterans, individuals with disabilities, and applicants from all backgrounds to apply. Brown and Caldwell ensures nondiscrimination in all programs and activities in accordance with Title VI of the Civil Rights Act

Brown and Caldwell (BC) has an exciting opportunity for a Mid-Level Electrical Engineer to join our growing team. Low and Medium Voltage power distribution, Controls, and Instrumentation Design, are services in high demand from our clients. This is an extraordinary opportunity for a mid-level engineer to continue to build upon their engineering career, do challenging and meaningful work, and protect the earth's resources at the same time. Hybrid work from one of our offices in Phoenix, Irvine, Las Vegas, Los Angeles, or San Diego is allowed. Detailed Description: For the right candidate, this position offers the opportunity for significant professional growth and the potential to collaborate with local and national teams. The candidate will have a broad range of responsibilities, which includes interacting with clients, leading electrical projects, and participating in new business development. In this role, your primary design delivery responsibilities will include conceptual design development, layout and selection of equipment, development of contract drawings using 2D and 3D design approaches, bid package preparation, field investigations, electrical and I&C design, and support during construction both in the office and in the field. We are looking for candidates who have a passion for building things, meeting new people, and desire to work with seasoned professionals who perform industrial, municipal, and other water/wastewater related work. Job Responsibilities Expectations: * Serve as a project task manager or perform as lead discipline (electrical and I&C) person on projects as appropriate. * Scope and budget projects, identify method of project execution and coordinate staff assignments. * Successfully manage and execute electrical design and be on time and on budget using company systems and tools. * Support business opportunities and assist in sales and marketing efforts (proposal preparation, interviewing, scope, fee, etc.). * Mentor and possibly supervise other electrical and I&C engineers and designers. * Perform contractor construction submittal reviews and Request For Information (RFI) documents and general electrical design activities for plant and pump station power systems. * Producing effective and accurate written documents, reports, and technical memorandums. * Collaborate with a national team of technical experts in the Electrical and I&C group. * Ability to travel occasionally to project sites and for client meeting both locally and out of Desired Skills and Experience: * BS in Electrical Engineering. * Professional registration. * Minimum of 5 years' experience as an Electrical Engineer working for government, municipal, and/or industrial water and wastewater industries preferred. * Experience in electrical power systems design and specifications, which include service entrance, feeder and branch circuits, lighting, grounding, power distribution and standby power equipment, and associated systems studies and calculations. * Solid knowledge in the application of the National Electrical Code. * Solid knowledge and understanding of electrical safety , NFPA 70E. * Effective oral and written communication. * Able to multi-task, be enthusiastic, be self-motivated, and work independently with a willingness to learn. * Candidate should be a self-starter, results-oriented, take ownership of their work, and be able to work under tight and pressured deadlines from time to time. Salary Range: The anticipated starting pay range for this position is based on the employee's primary work location and may be more or less depending upon skills, experience, and education. These ranges may be modified in the future. Location A: $97,000- $132,000 Location B: $106,000- $145,000 You can view which BC location applies to you here. If you have any questions, please speak with your Recruiter. Benefits and Other Compensation: We provide a comprehensive benefits package that promotes employee health, performance, and success which includes medical, dental, vision, short and long-term disability, life insurance, an employee assistance program, paid time off and parental leave, paid holidays, 401(k) retirement savings plan with employer match, performance-based bonus eligibility, employee referral bonuses, tuition reimbursement, pet insurance and long-term care insurance. Click here to see our full list of benefits. About Brown and Caldwell Headquartered in Walnut Creek, California, Brown and Caldwell is a full-service environmental engineering and construction firm with 50 offices and 2,100 professionals across North America and the Pacific. For 75 years, we have created leading-edge environmental solutions for municipalities, private industry, and government agencies. We strive to be the company of choice-to our clients, who benefit from our passion for delivering exceptional quality, and to our employees, present and future, who share our commitment to client service, collaboration, and innovation. Join us, and you will find a home where you can do your best work, reach new levels of expertise, and enjoy exceptional development opportunities. For more information, visit ************************ This position is subject to a pre-employment background check and a pre-employment drug test. Notice to Third Party Agencies: Brown and Caldwell does not accept unsolicited resumes from recruiters or employment agencies. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement and approved engagement request with Brown and Caldwell, Brown and Caldwell reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Brown and Caldwell is proud to be an EEO/AAP Employer. Brown and Caldwell encourages protected veterans, individuals with disabilities, and applicants from all backgrounds to apply. Brown and Caldwell ensures nondiscrimination in all programs and activities in accordance with Title VI of the Civil Rights Act

Teaching Associate (TA) for the Department of Electrical and Computer Engineering Lyles College of Engineering The Department of Electrical and Computer Engineering seeks graduate students as Teaching Associate applicants. Teaching Associates typically are responsible for providing classroom instruction. Eligibility is determined by successful TA eligibility, department eligibility and adequate funding. The department is seeking TA applicants for sections of ECE1, ECE 85L, ECE 90L. TAs will teach sections of ECE1, ECE 85L, ECE 90L the following semester and could have opportunities to teach other beginning courses in the Electrical and Computer Engineering Department. The department reserves the right to choose the most qualified candidate for each position and to assign TAs to the courses that are appropriate for the department program and curriculum in any given semester. Due to staff and curriculum changes, courses offered may vary, and no guarantee of employment from semester to semester can be made. Anticipated Appointment Dates: This position is opened until filled. If you have applied and no other positions are available, you will be notified. Fall 2025: August 18, 2025 - December 22, 2025; Spring 2026: January 15, 2026 - May 22, 2026 Hours/Units per week: Students can work up to 20-hours per week; 1-unit is equivalent to 2.66 hours per week (40hrs x 1-unit/15-unit) The typical range for labs is between 1.3-wtus - 5.2-wtus (dependent on courses and number of section(s) assigned) The typical range for lectures is between 3-6 units (dependent on courses and number of section(s) assigned) No more than 7.5-units Job Duties may include the following, but will be dependent upon the specific course to which the teaching associate will be assigned, as well as upon the specific needs of the faculty member in charge of the course: Instruct and manage the classroom Create or implement course design and assignment sequence Prepare course materials and classroom activities Respond to and evaluate student writing Assess student performance, including give course grades Assist students outside of class during office hours and by appointment Attend TA orientation at the beginning of the semester Participate in programmatic assessment procedures Teach beginning ECE1, ECE 85L, ECE 90L course (as instructor of record) Maintain office hours Evaluate student work Qualifications: A candidate for the position of teaching associate in the Department of Electrical and Computer Engineering must meet the following minimum qualifications: Admission to the ECE Master Program in the Department of Electrical and Computer Engineering, in good academic standing. Enrollment in at least 6-units for the semester or in two courses toward the degree. Demonstrated, satisfactory progress towards the degree. Ability to relate well with others within the academic environment and have the ability or potential to learn how to instruct and evaluate students. Demonstrated commitment to working effectively with faculty, staff and students from diverse ethnic, cultural and socioeconomic backgrounds. Application Procedures: The review of applications will begin in Spring 2025 for a Fall 2025 start date. *For full consideration, the application and all required materials must be submitted by June 30th; consideration will continue on a rolling basis until all positions are filled. The following documents are required to upload: Current unofficial transcripts from your undergraduate and graduate education. If you have attended more than one institution, please copy and combine these transcripts into one document. How to submit your unofficial transcripts: If you are a Fresno State student: Sign into https://my.fresnostate.edu. Access your Unofficial Transcript. Highlight all text throughout the document, copy it and paste it into a word processor document, and save the document with your name somewhere in the file name. If you are not yet a Fresno State student: Most U.S. universities allow students to access their academic records online, in a way similar to the way described above for Fresno State students. Contact your institution's registrar to find out how to access your unofficial transcript and follow the process described above. If you have transcripts from more than one institution, please copy them all and paste them into one document, as PageUp only allows one document to be uploaded into the link for transcripts. Make certain that each institution is clearly indicated within this document. Curriculum Vita, or résumé. Your Curriculum Vita, or CV, is the academic equivalent of a résumé. It should contain your contact information, your employment and educational history, skills such as computer programming, familiarity with commonly used computer programs, as well as internships, awards, volunteer service, training and any other experience you have that is relevant to education and a list of three references. List of three references. The online application will request you to enter your three references separate from your C.V. The letters of references will be requested by the committee. Be prepared to enter the following for each of your three referents: First name Last name Type of reference Organization Position Title Phone Number E-mail address Inquiries: For application inquiries, please email rraeisi@csufresno.edu. Finalists: may be asked for an interview Teaching Associates additional information regarding assignment: The California State University Teaching Associate Classification and Standards Evaluations: For details please view the Academic Policy Manual, Section 311 Salary: Each department has different salary scales. Please check with your department for your Base Salary. The monthly salary is calculated based on the Weighted Teaching Units assigned. Salary Schedule: The CSU Salary Schedule can be found here (Class Code = 2354 for Teaching Associates). Assignments: Assignments are made by Department Chair or Program Coordinator after consultation with the teaching associate. Duties Form: Per the Collective Bargaining Agreement for Unit 11, a Duties Form (see Appendix E of the CBA) will be completed between the Department and Academic Student Employee. This form substantiates the jobs included for the department teaching associate position. Teaching Associate is a student position for those actively enrolled in a graduate program at Fresno State. Students are limited to 20-hours of part-time work on campus. About the Campus California State University, Fresno, is a forward-looking and diverse institution located in California's Central Valley, known for its agriculture, reasonable housing costs, cultural diversity, and proximity to Yosemite National Park and the Sierra Nevada. The Fresno State campus sits in the midst of the San Joaquin Valley, a valley rich in the traditions and representation of Native American peoples and cultures. We are grateful to be in the traditional homelands of the Yokuts and Mono peoples, whose diverse tribal communities share stewardship over this land. The campus is ranked 36th in the nation by Washington Monthly's 2022 National University Rankings, and ranked 25th in the nation in MONEY Magazines 50 Best Public Colleges. The campus is classified as an R2 “Doctoral Universities - High research activities” university per Carnegie Classification of Institutions of Higher Education. Fresno State's Principles of Community These Principles were developed collaboratively by faculty, staff, and administrators. They exemplify what we aspire to be. Find out more about our Principles of Community here. California State University, Fresno is an engaged University. We focus on broadening students' intellectual horizons, fostering lifelong learning skills, developing the leaders of tomorrow, promoting community involvement, and instilling an appreciation of world cultures. We cultivate a culture of open dialogue, mutual respect, and belonging to support educational excellence and student success. Through academic programs, student organizations and activities, faculty initiatives, and community partnerships, we encourage meaningful engagement with diverse perspectives. Members of the University community are expected to work effectively with faculty, staff, and students who represent many perspectives, beliefs and identities, committed to fostering an inclusive, respectful, and intellectually vibrant environment. Our Students California State University, Fresno is committed to serving our students with a focus on inclusion. Fresno State has been recognized as a Hispanic-Serving Institution (HSI); an Asian American/Native American/Pacific Islander-Serving Institution (AANAPISI); and has been designated to the Community Engagement Classification by the Carnegie Foundation for the Advancement of Teaching. Other Campus Information In compliance with the Annual Security Report & Fire Safety Report of Campus Security Policy and Campus Crime Statistics Act, California State University, Fresno has made crime-reporting statistics available to applicants, students, and employees online at https://adminfinance.fresnostate.edu/clery/index.html. Print copies are available by request from the Campus Police Department. The person holding this position is considered a "general reporter" under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 Revised July 21, 2017 as a condition of employment. California State University, Fresno is a tobacco-free, smoke-free, and vapor-free campus. For more information, please click http://fresnostate.edu/adminserv/smokefree/index.html California State University, Fresno is committed to maintaining and implementing employment policies and procedures in compliance with applicable state and federal equal employment opportunity laws and regulations. Executive Orders 1096 and 1097 prohibit discrimination, harassment, and retaliation on the basis of a protected status: race, color, religion, national origin, ancestry, age, sex (including gender identity), sexual orientation, marital status, pregnancy, mental disability, physical disability, medical condition and covered veteran status. Fresno State's commitment to diversity informs our efforts in recruitment, hiring, and retention. We are proud to be an affirmative action and equal opportunity employer. The California State University System strongly recommends the COVID-19 vaccination and booster for all individuals who access any in-person program or activity (on- or off-campus) as stated in the revised policy effective April 2023, COVID-19 Vaccinations and Other Safety Measures. You can find more information here.

At Powell, we're committed to enhancing lives by delivering reliable power distribution systems across diverse markets, from industrial to renewables. As a global leader, we prioritize our Core Values-Customer First, Respect for Employees, Continuous Improvement, and a “Can-Do” Attitude-to provide innovative, cost-effective solutions that power communities worldwide. Join us to be part of a team dedicated to solving real-world challenges and shaping the future of energy. Internship Overview Powell's 10-week paid internship program offers college students hands-on experience, professional training, and the opportunity to make an impact through a meaningful project aligned with your field of study. As an Electrical Engineering Intern, you'll focus on numerous applications, gaining valuable skills in a dynamic, collaborative environment. Project Focus Intern Project: The Electrical Engineering internship will be focused on Understanding Powell PCR/Module applications while learning the engineering process for Powell Industries. Ideal applicants will be pursuing a degree in Electrical and or Mechanical Engineering. Expected Deliverables: Review/ Release As-Built drawings: Comments /Mark-ups on As-built PCR drawings. Review/ Release Cable Schedule and Equipment list. Input/ release Cable and cable tray take offs for purchasing in Powell Systems Develop Equipment layout drawings per applicable code and project standards. Input/release Equipment for purchasing in Powell Systems. Read/ review customer Specifications, upload project clarifications to Powell Project site and participate in a Project Kick off meeting. Develop a PCR Specification doc for through use of the Powell Specification program. Walkthrough and use of PCR check sheets. How does this project benefit Powell or your functional area? Future hire that will be able to step in and make contribution within the first 3 months of hiring date. By having new individuals go through and be trained on Powell's systems, it allows Powell's process to be reviewed and shown where improvements can be made. Desired Major: Currently pursuing a 4 year degree from an accredited institution BS EE or Electrical Design/ drafter Rising Junior or Senior level students continuing their studies in the fall semester Possess multi-tasking abilities and strong inter-personal skills. High Motivation What You'll Gain Hands-On Experience: Work on real-world engineering challenges with cutting-edge technology. Mentorship: Collaborate with and learn from experienced engineers and business leaders. Professional Growth: Enhance your technical and interpersonal skills in a team-oriented setting. Networking: Engage with industry professionals and participate in fun social events. Community Impact: Contribute to Powell's mission of powering communities globally. Who We're Looking For We seek motivated, curious, and driven students with the following qualifications: Pursuing a bachelor's degree in Mechanical Engineering, Electrical Engineering Rising Junior or Senior continuing studies in Fall 2027. Minimum 3.0 GPA and strong academic standing. Team player with strong communication, multitasking, and interpersonal skills. Self-starter with a dependable, can-do attitude. Bonus Skills: Experience with CAD (e.g., SolidWorks, AutoCAD) or Finite Element Analysis (FEA). Program Benefits Competitive pay for a 10-week summer internship. Exposure to a collaborative team environment and meaningful projects. Opportunities to interact with Powell's leadership team. Fun social events and community involvement activities. Successful Tips Update your resume to highlight relevant coursework, projects, GPA, and experience reading drawings. Emphasize your academic background and experience, teamwork, communication, and problem-solving skills. Be ready to discuss your technical skills, teamwork experiences, and interest in Powell. Join Powell and make a difference in the world of energy! Important Notes Sponsorship: Powell is unable to provide sponsorship for H1-B, F1, or OPT visas at this time. Join Powell and make a difference in the world of energy!

Manager of Engineering - Electric Utility Industry Since 1949, Lea County Electric Cooperative (LCEC) has been a trusted provider of energy, serving over 7,000 members in six counties across New Mexico and Texas. We pride ourselves on our commitment to community values, fostering employee growth, offering competitive pay, and providing a comprehensive benefits package within a collaborative workplace culture. Role Overview As the Manager of Engineering at LCEC, you will lead efforts to ensure the reliability, efficiency, and long-term success of our electrical distribution system. This leadership role is ideal for an innovative professional dedicated to advancing energy solutions for our community. Responsibilities System Analysis and Strategy Assess the performance of our electrical distribution infrastructure. Design and implement a four-year maintenance and construction plan to optimize system operations. Team Collaboration for Efficiency Partner with the engineering team to analyze load flow, short circuit scenarios, and protective relaying schemes. Oversee studies on voltage regulation, arc flash safety, and system coordination to enhance network performance. Future Planning and Growth Anticipate system demands and design strategies for infrastructure upgrades to support business expansion and increasing energy loads. Qualifications The ideal candidate will bring: A Bachelor's degree in electrical engineering. Proven experience in the electrical utility industry. Strong expertise in advanced mathematics, including trigonometry, calculus, algebra, and analytic geometry. Familiarity with Schweitzer Engineering Laboratories equipment or similar systems (preferred). Understanding of NERC and FERC regulations, with experience in SPP considered an asset. Outstanding problem-solving, organizational, and communication skills. A valid New Mexico driver's license and compliance with drug testing policies. Work Schedule and Benefits Hours: Monday through Friday, 8:00 AM - 5:00 PM (can vary at times), promoting work-life balance. Compensation: Competitive salary paired with an extensive benefits package, including: Medical, dental, and vision coverage on day one. Life insurance and long-term disability. Aflac options. Employer-funded pension. Educational assistance programs. 401(k) plan with an 8% employer contribution after one year of service. How to Apply If you're passionate about contributing to the success of Lea County Electric Cooperative and meet the required qualifications, we encourage you to submit your application. Lea County Electric Cooperative, Inc., is proud to be an Equal Opportunity Employer. Take the next step in your career and make a meaningful impact on the community's energy future-apply now!

Job Description Hazen and Sawyer is seeking a Mid-Level Electrical Engineer for our Hartford (Wethersfield), CT office. As part of our Electrical team you will have exceptional opportunities to provide superior solutions to our clients' most difficult problems through a variety of water related assignments. Qualified candidates will provide electrical engineering and design for water and wastewater facility projects. Join us in delivering exceptional results and continuous building of our reputation for excellence in the industry. We believe in fostering a dynamic and supportive environment, where you can grow and make a significant impact. So, if you're ready to join a team that values innovation and excellence, we would love to hear from you! Why Hazen and Sawyer: Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water." Our work includes planning, design, and oversight of construction of environmental infrastructure - for water, wastewater, and stormwater management. We foster a work environment low on bureaucracy and high in creativity. We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed. We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK. A flexible hybrid work schedule supports today's busy professionals. Work Setting: Hybrid (remote and office) Key Responsibilities: Candidate will serve as the lead electrical engineer on projects for water and wastewater facilities. Responsibilities include supervision of less experienced staff working on projects, and interaction with clients and engineers from other disciplines. Required Qualifications: Qualified candidate should have knowledge in industrial power design, including medium and low voltage electrical power distribution, motor control, VFDs, lighting systems, equipment layout and related activities. Candidate should have a good working knowledge of the NEC and related Codes. Candidate must also have good communication skills, including interaction with clients and contractors. AutoCAD experience is a must Professional Engineering License is required. 5-10 years in electrical engineering and design and a Bachelor of Science in Electrical Engineering are required. Preferred Qualifications: Revit BIM software and SKM power systems software is desirable. Experience with instrumentation and control systems is a plus, including field and panel instruments, operator interfaces, and PLCs. What We Offer: Comprehensive health benefits (medical, dental, vision, and prescription plans) Pre-tax flexible spending plans for medical, dependent care, and transportation Short and long-term disability, and employer paid life insurance Paid holidays, floating holidays, and paid time off (PTO) Employer-contributed 401(k) plan and additional financial planning support Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships Starting pay range for this position depends on skills, experience, education and geographical location