Electrical Engineer jobs at Hazen and Sawyer

Job Description Candidate will provide electrical engineering and design for water and wastewater facility projects, serving as lead electrical engineer when required. Qualified candidate must have knowledge in industrial power design, including medium and low voltage electrical power distribution, motor control, VFDs, lighting systems, equipment layout and related activities. Candidate must have a good working knowledge of the NEC and related Codes. Candidate must possess strong communication skills, including ability to interact with clients, contractors, and other engineers. Responsibilities Include: Supervision of less experienced staff on a project Coordination with engineers of other disciplines Conducting field inspections of completed installations Conducting field visits as part condition assessments and/or design Additional Qualifications Required: Experience and proficiency with Autocad software Experience and proficiency with SKM and/or ETAP software Working knowledge of Revit BIM software 5-15 years in industrial electrical engineering and design Bachelor of Science in Electrical Engineering, or related bachelor of science degree Professional Engineering License Ability to be licensed in additional states at request of Company Experience with instrumentation and control systems is a plus, including field and panel instruments, operator interfaces, and PLCs. Experience within the water and wastewater industry is highly desirable. We provide a comprehensive benefits package which includes employer paid life insurance, 401k employer contribution (after 1 year of service), performance bonus, comprehensive family medical, dental and vision insurance, paid time off, holidays, short-term and long-term disability, paid parental leave (after 1 year of service), employee assistance and wellness programs. Typical starting pay range for this position depends on skills, experience, education and geographical location.

Domain: Embedded Hardware, PCB Design, FPGA, High-Speed Systems, EMI/EMC Experience: 10+ years San Jose, CA Based - Lead end-to-end hardware development for FPGA/SoC-based systems, including architecture, schematic design, PCB review, board bring-up, debugging, compliance testing, and cross-functional collaboration. Key Responsibilities: Hardware Design: Architecture, schematic capture, PCB review, documentation System Integration: High-speed board bring-up, signal/power integrity troubleshooting Testing & Compliance: DVT/PVT, EMI/EMC design, certification coordination Vendor Interface: PCB fabrication, assembly, procurement Sustenance: RMA debugging, redesign for compliance Collaboration: Work with firmware, mechanical, and test teams Technical Skills: Tools: Allegro, Altium, Interfaces: USB, BLE, SPI, I2C, Ethernet, CAN, PCIe Lab Expertise: Oscilloscopes, Logic Analyzers, Signal Generators Qualifications: Bachelor's in Electronics/Communication (or related), strong debugging and documentation skills

Project Engineer - Advisory Engineer (Project Engineering) Compa Industries is searching for qualified candidates for a Project Engineer position supporting Savannah River Nuclear Solutions (SRNS) in Aiken, SC. Salary: $70/hr - $80/hr Location: Aiken, SC (Onsite / Hybrid as approved by SRNS) Citizenship: US Citizenship Required Work Schedule: 5/8s, 4/10s, or 9/80s (40-hour workweek, excluding SRNS holidays) Clearance: Ability to obtain and maintain DOE “Q” clearance required 🚫 Mandatory Experience Requirement - Read Before Applying Candidates must meet all the following requirements to be considered: Must possess a Bachelor's degree in Engineering or current Professional Engineer (PE) registration Must have experience providing engineering leadership and project execution support for complex projects Must have experience managing engineering scope, cost, and schedule Must be able to obtain and maintain a DOE Q clearance Subcontractor must have active eFOCI registration and approved Facility Level Clearance with DOE/NNSA Must demonstrate the ability to work within DOE-regulated environments using formal engineering, quality, and project control processes ❗ Applications missing these criteria will not be considered. Impact Join a mission-critical engineering team supporting DOE and national security programs at SRNS. As a Project Engineer, you will play a key role in integrating engineering activities, managing execution of assigned scopes, and ensuring projects are delivered safely, on time, and within budget-while meeting rigorous nuclear and DOE standards. This role directly supports the successful delivery of high-visibility engineering initiatives across the Savannah River Site. Responsibilities and Duties Provide engineering staff augmentation support to SRNS Integrate and manage engineering activities for assigned projects, including: Design criteria development Resource forecasting Schedule development and prioritization Manage engineering tasks to ensure delivery against approved cost and schedule baselines Apply project management tools and methods to support current and future projects Provide engineering leadership and coordination across multidisciplinary teams Manage engineering administration, document control, project controls, and quality engineering activities Resolve conflicts between project direction and functional technical direction Establish and manage engineering baselines for assigned projects and work requests Evaluate project cost and schedule variances and implement corrective actions Review subcontractor deliverables to ensure technical, cost, and schedule compliance Support EVMS-based project execution and reporting Coordinate and communicate effectively with engineering, operations, QA, facility, and management personnel Mentor junior engineers and support development of engineering capability Minimum Qualifications Education B.S. in Engineering OR Current registration as a Professional Engineer (PE) Skills / Experience Proven experience providing overall engineering and project execution leadership Experience integrating engineering resources, schedules, and tools Demonstrated ability to manage scope, cost, and schedule Experience reviewing subcontractor engineering work and design outputs Working knowledge of Earned Value Management Systems (EVMS) Strong written and verbal communication skills Ability to work effectively with diverse, multidisciplinary teams Desired Skills Previous experience supporting DOE or NNSA projects Prior SRNS or DOE site experience Active or recent (within 2 years) DOE Q or L clearance Familiarity with DOE engineering, quality assurance, and project execution processes Education and Experience Requirements As listed in Minimum Qualifications. Additional certifications or site-specific training are preferred but not required. Why Work at COMPA Industries? We provide careers, not just jobs. For over 30 years, COMPA Industries has supported the Department of Energy and national security missions with highly skilled technical professionals. Our employees work on some of the nation's most critical projects, solving complex challenges in nuclear, engineering, and operations environments. We offer competitive compensation, a collaborative culture, and the opportunity to make a meaningful impact supporting mission-critical work. COMPA is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration without regard to age, race, color, religion, sex, national origin, sexual orientation, disability, or protected Veteran status. Note: COMPA's policy may disqualify applicants with certain criminal histories from specific positions.

Entity: Gas & Low Carbon Energy Job Family Group: Project Management Group Gas & Low Carbon Energy are looking for a Project Engineer to join the Onshore Renewables team. This role will support multi-disciplinary projects varying in size, complexity and technology and will be responsible for the planning, design, development, and management of US onshore renewable energy projects. This role's activities will support the development of onshore renewable energy projects consisting of wind, solar and energy storage primarily in support of large-scale green hydrogen production and other integrated energy opportunities. The Project Engineer is responsible for ensuring safe, quality and competitive design, development and execution working across cross-functional internal and external stakeholders. Job Description: Key Accountabilities: Coordinate and manage engineering project activities throughout the project lifecycle, ensuring adherence to timelines, budgets, and quality standards. Conduct regular project meetings to monitor progress, resolve issues, and communicate updates. Support electrical engineering designs for onshore renewable energy projects, considering site-specific factors, technical requirements, and regulatory standards. Prepare and review standardization of technical specifications, drawings, and documentation. Collaborate with stakeholders to define project objectives, scope, and deliverables and support stage-gated governance process. Identify and evaluate technical risks, and develop mitigation strategies. Oversee engineering analysis and simulations to optimize project performance and drive low cost LCOE / LCOH through standardization and continuous improvement. Collaborate with BP's Technical Center of Excellence teams to align on best practices and standards. Collaborate across procurement, land management, business development, government affairs, and other disciplines where needed for successful delivery of projects. Support management of external relationships where needed such as contractors, government and regulatory. Ensure compliance with relevant codes, standards, regulations, and permits. Maintain accurate project documentation, including design files, drawings, and correspondence. Demonstrate bp beliefs which promote a safe and environmentally responsible work culture, ensuring HSSE risks are considered. Education and Experience Electrical Engineering degree required. Prefer master's degree in engineering and PE licensure. Medium and high voltage electrical engineering, including balance-of-plant, substation, and gen-tie. Technical expertise, with a minimum of 5 years direct experience in projects engineering within solar, onshore wind and storage technologies. Prior experience with a developer is a plus. A breadth of experience across solar, onshore wind and storage technologies; experience in hydrogen production technology and working in a multi-disciplinary team is a plus. A good understanding of the key value drivers of projects that relate to project engineering and ability to drive competitiveness without a detrimental impact on safety or quality. Understanding of the US Renewables Market is a plus Ability to lead, influence and collaborate within and outside of team, as well as with internal and external project stakeholders. Ability to travel up to 25% to project sites. Considering Joining bp? At bp, we support our people to learn and grow in a diverse and exciting environment. We believe that our team is strengthened by diversity. bp is committed to encouraging an inclusive environment in which everyone is respected and treated fairly. There are many aspects of our employees' lives that are meaningful, so we offer benefits to enable your work to fit with your life. These benefits can include flexible working options, a generous paid parental leave policy, excellent retirement benefits, and more! Travel Requirement Up to 10% travel should be expected with this role Relocation Assistance: Relocation may be negotiable for this role Remote Type: This position is a hybrid of office/remote working Skills: Construction, Design development and delivery, Engineering Design Process, People Management, Performance management, Project and construction safety, Project execution planning, Project HSSE, Project Leadership, Project Team Management, Renewable Energy, Risk Management, Safety, Solar Energy, Sourcing Management, Supplier Relationship Management Legal Disclaimer: We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status. Individuals with disabilities may request a reasonable accommodation related to bp's recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an accommodation related to the recruitment process, please contact us to request accommodations. If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

OPEN COMPETITIVE RECRUITMENT Open to all qualified candidates. Tentative examination dates for this recruitment: TBA Dates may change due to unforeseen circumstances. Candidates who pass each phase of the recruitment process will be notified of the official examination dates. Under direction, to manage and perform professional electrical engineering work in the design and planning of electrical generation, transmission, and distribution systems, or operation of an electric utility; to be responsible for electrical engineering projects; and perform related work as required. Plans, directs and schedules the work of para-professional electrical engineers; manages and is responsible for advanced project management including: research, planning, design, cost estimation and budget management; confers with electrical contractors, and consulting engineers; prepares or directs preparation and checking of construction drawings, specifications and materials lists for electric generation, transmission and distribution facilities; acts as a liaison between customers and the utility; understands and explains billing components to customers and staff; researches new technology and makes recommendations to improve customer and utility operations; performs system load flow, stability, and short circuit studies; prepares complex calculations for transmission and distribution system relay settings and voltage regulation problems; performs economic analysis and studies of alternative approaches to the additions to electrical power system; forecasts electric system load; directs the preparation of data for reports to governmental and industrial agencies; prepares and maintains accurate reports and records, both manually and electronically; directs, assigns and evaluates work; supervises, trains, and evaluates employees; makes effective recommendations regarding hiring, promotions, transfers and disciplinary action as needed; drives on City business. Employment Standards: Knowledge of principles and practices of electrical engineering; principles and practices of project management; electrical utility distribution systems and equipment; principles and practices of sound personnel management and supervision. Skill in drafting and engineering-related drawing; operating modern computers and related software; independent judgement and decisions based on standard policy and procedures; personnel management and supervision. Ability to design and layout electrical engineering plans and programs; prepare and interpret electrical plans, specifications and wiring diagrams; plan and supervise the work of professional and technical personnel; prepare reports and studies relating to electrical engineering problems; make accurate computations in the electrical engineering fields; utilize computers in the performance of complex engineering and economic calculations; communicate effectively, both orally and in writing; establish and maintain effective working relationships with supervisors, fellow employees, and the public. Education/Training: Any combination of education and/or experience that has provided the knowledge, skills, and abilities necessary for acceptable job performance as determined by the City. Example combination includes, but is not limited to graduation from an accredited college or university with a Bachelor of Science degree in Electrical Engineering and four years of professional electrical engineeringexperience, including one year at the level of Electrical Engineering Associate II or equivalent. Note: A Bachelor of Science degree in an engineering or science field other than electrical engineering, but with upper class or professional level course work in electrical engineering may be qualifying. Registration as an Electrical Engineer in the State of California may be substituted for the education requirement. License & Certificates: A valid California Class "C" driver's license or equivalent at time of appointment. Desirable Qualifications: Registration as an Electrical Engineer in the State of California and certification as a Project Management Professional. Proficiency in AutoCAD.

Plans and assists with the construction and maintenance of electrical substation and transmission line projects with a continuous focus on regulatory compliance. Physical Demands Physical demands include but are not limited to: sitting, talking, hearing, seeing, standing, walking, driving, using hands and fingers to operate office equipment and machines, and occasionally lifting and/or moving objects up to and including 25 pounds. Minimum Qualifications Bachelor's degree with significant coursework in Electrical Engineering, Electronics, or a similar field of study. Some related experience is preferred, but not required. Work Schedule Monday-Friday; 8am-5pm

State Water Project Aerial Tour 2021: ******************************************* is physically located in the Arden-Arcade area in Sacramento, CA. Join a team of highly motivated professionals that are doing exciting work! We hope you'll check out the Duties and Desirable Qualifications below and apply for this great career opportunity to join our State Water Project team and help deliver water to over 27 million Californians as well as contribute to protecting our environment and species conservation efforts. Why Choose Us: We own and operate our own facilities, which is the largest water and power delivery system in the United States. As owners and operators of our own infrastructure, we are empowered to make the right choices in design, detailing, and materials to ensure public safety and facility reliability. We are not driven by the cost-cutting measures or unrealistic expectations that you may find in the private sector. Instead, direct the operations and maintenance of the State Water Project to safely deliver and optimize the uses of available water with environmental sensitivity. At DWR, you will have the support of knowledgeable and helpful colleagues, robust training programs, and professional organizational memberships for your professional growth. Our large organization provides an opportunity for a long and promising career full of growth and opportunity. Duties: Under the general direction of the supervisor of the Transaction Analysis (TA) Unit, the incumbent will assist in engineering analysis, electrical operations reporting, and financial analysis. This includes the development and maintenance of the energy accounting system, cost allocation system, and other custom systems models. You will find additional information about the job in the Duty Statement. Minimum Requirements You will find the Minimum Requirements in the Class Specification. * ELECTRICAL ENGINEER Additional Documents * Job Application Package Checklist * Duty Statement Position Details Job Code #: JC-501373 Position #(s): ************-XXX Working Title: Electrical Engineer Classification: ELECTRICAL ENGINEER $6,488.00 - $7,735.00 A $7,428.00 - $9,296.00 B New to State candidates will be hired into the minimum salary of the classification or minimum of alternate range when applicable. # of Positions: 1 Work Location: Sacramento County Telework: Hybrid Job Type: Permanent, Full Time Department Information Division of Operations and Maintenance, Assistant Division Manager - Power Operations Management, Power Markets, Compliance, and Reporting Branch, Power Settlements Section, Transaction Analysis Unit, Sacramento Department of Water Resources (DWR) was established in 1956 by the California State Legislature. We manage California's water resources, systems, and infrastructure, including the State Water Project, in a responsible sustainable way. At DWR, we are embedding climate change response into every project we undertake. We have set standards to help evaluate how each project incorporates climate resilience principles and ensure consistency across the Department. Our mission is to sustainably manage the water resources of California, in cooperation with other agencies, to benefit the state's people and protect, restore, and enhance the natural and human environments. DWR also strives to create a trusting and welcoming workplace where employees embrace diverse viewpoints and treat each other with civility and respect. An important component of DWR's equal employment opportunity program centers around justice, diversity, equity, and inclusion. Department Website: ********************* Free virtual career consultation services including one-on-one DWR career consultations, application/resume review, tips for applying, and mock interviews, provided by DWR's Recruitment and Workforce Planning section can now be scheduled via *********************************** Special Requirements Must be available to work outside normal business hours, including overnight travel. Travel throughout the state of California will be required. Employee is required to successfully complete all safety training related to the functions of the job. All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences, and is free from discrimination. The Department of Water Resources is committed to its mission and employees, and we are grounded in our commitment to public safety. Regular, consistent, and predictable attendance is essential to the successful performance in this position. Under the provisions of the North American Electric Reliability Corporation Critical Infrastructure Protection Standard CIP-004 as part of the Energy Policy of 2005, this position has authorized cyber access to or unescorted physical access around critical cyber assets and is subject to a satisfactory background check prior to appointment and every seven years thereafter. Application Instructions Completed applications and all required documents must be received or postmarked by the Final Filing Date in order to be considered. Dates printed on Mobile Bar Codes, such as the Quick Response (QR) Codes available at the USPS, are not considered Postmark dates for the purpose of determining timely filing of an application. Final Filing Date: 1/6/2026 Who May Apply Individuals who are currently in the classification, eligible for lateral transfer, eligible for reinstatement, have list or LEAP eligibility, are in the process of obtaining list eligibility, or have SROA and/or Surplus eligibility (please attach your letter, if available). SROA and Surplus candidates are given priority; therefore, individuals with other eligibility may be considered in the event no SROA or Surplus candidates apply. Applications will be screened and only the most qualified applicants will be selected to move forward in the selection process. Applicants must meet the Minimum Qualifications stated in the Classification Specification(s). How To Apply Complete Application Packages (including your Examination/Employment Application (STD 678) and applicable or required documents) must be submitted to apply for this Job Posting. Application Packages may be submitted electronically through your CalCareer Account at ********************** When submitting your application in hard copy, a completed copy of the Application Package listing must be included. If you choose to not apply electronically, a hard copy application package may be submitted through an alternative method listed below: Address for Mailing Application Packages You may submit your application and any applicable or required documents to: Department of Water Resources Mailing Address Attn: Division of Human Resources P.O. Box 1079 Sacramento, CA 95812 Address for Drop-Off Application Packages You may drop off your application and any applicable or required documents at: Department of Water Resources Submit in Person Certification Desk 715 P Street, 7th floor Sacramento, CA 95814 08:00 AM - 04:30 PM Required Application Package Documents The following items are required to be submitted with your application. Applicants who do not submit the required items timely may not be considered for this job: * Current version of the State Examination/Employment Application STD Form 678 (when not applying electronically), or the Electronic State Employment Application through your Applicant Account at ********************** All Experience and Education relating to the Minimum Qualifications listed on the Classification Specification should be included to demonstrate how you meet the Minimum Qualifications for the position. * Resume is required and must be included. * Other - Cover Letter. * Statement of Qualifications - See Special Instructions for additional details. Applicants requiring reasonable accommodations for the hiring interview process must request the necessary accommodations if scheduled for a hiring interview. The request should be made at the time of contact to schedule the interview. Questions regarding reasonable accommodations may be directed to the EEO contact listed on this job posting. Desirable Qualifications In addition to evaluating each candidate's relative ability, as demonstrated by quality and breadth of experience, the following factors will provide the basis for competitively evaluating each candidate: It is desirable that the incumbent have experience or knowledge of California Independent System Operator (CAISO) energy markets and settlements, familiarity with the State Water Project (SWP) operations, proficiency in coding and scripting for data analysis and automation, strong ability to troubleshoot software and manage datasets, and experience with data management tools and best practices. Benefits Click here to read about the outstanding benefits offered to eligible employees. We have PLENTY of FREE parking. This position is located in the Arden Arcade area. Personal Leave Program 2025: Effective July 1, 2025, state employees are subject to temporary wage reductions in exchange for Personal Leave Program (PLP) accruals. The specific rate and hours earned were negotiated and agreed upon by each bargaining unit. The actual monetary impact of these temporary reductions can vary based on your bargaining unit and/or federal and state tax withholdings. For additional information please visit Human Resources Manual - CalHR. Contact Information The Hiring Unit Contact is available to answer questions regarding the position or application process. Hiring Unit Contact: Cynthia Pollard ************** **************************** Please direct requests for Reasonable Accommodations to the interview scheduler at the time the interview is being scheduled. You may direct any additional questions regarding Reasonable Accommodations or Equal Employment Opportunity for this position(s) to the Department's EEO Office. EEO Contact: Office of Civil Rights ************** ************************ California Relay Service: ************** (TTY), ************** (Voice) TTY is a Telecommunications Device for the Deaf, and is reachable only from phones equipped with a TTY Device. Special Instructions To be considered, submit a completed State application (STD. 678), cover letter, resume, and SOQ. Please reference SAP Position #50002099 and Job Control #501373 in the "examination(s) or job title(s) for which you are applying" section of your application. Cover Letter The Cover Letter should include a statement as to why you are interested in this position and highlight skills that are most applicable to the Duty Statement. Statement of Qualifications This is a (2-page maximum) separate typed document entitled Statement of Qualifications in Arial 12-point font that addresses the candidate's knowledge, skills, abilities, and experience as it relates to the job description. The following basis of eligibility will be considered: List eligibility, transfer, LEAP, reinstatement, and SROA/Surplus. Resumes, cover letters, and/or other attachments will not be accepted in lieu of a completed application. Click here to complete DWR's Recruitment Survey. This survey is for research purpose only and will not affect the application status. Examination/Assessment For more information about the State hiring process, click here. To learn more about how to get a State job, click here. List eligibility can be established by taking and passing the examination/assessment. Click the examination(s)/assessment(s) information link: ELECTRICAL ENGINEER Equal Opportunity Employer The State of California is an equal opportunity employer to all, regardless of age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding and related medical conditions), and sexual orientation. It is an objective of the State of California to achieve a drug-free work place. Any applicant for state employment will be expected to behave in accordance with this objective because the use of illegal drugs is inconsistent with the law of the State, the rules governing Civil Service, and the special trust placed in public servants.

Under direction of the Senior Hydroelectric Power Utility Engineer, the incumbent assists the engineering staff in performing less complex field and office electrical and electronic engineering work; with training, performs electrical designing, drafting, and inspection work of average difficulty; and does other related work. You will find additional information about the job in the Duty Statement. Minimum Requirements You will find the Minimum Requirements in the Class Specification. * ELECTRICAL ENGINEER Additional Documents * Job Application Package Checklist * Duty Statement Position Details Job Code #: JC-500387 Position #(s): ************-007 Working Title: ELECTRICAL ENGINEER Classification: ELECTRICAL ENGINEER $6,488.00 - $7,735.00 A $7,428.00 - $9,296.00 B New to State candidates will be hired into the minimum salary of the classification or minimum of alternate range when applicable. # of Positions: 1 Work Location: Contra Costa County Telework: In Office Job Type: Permanent, Full Time Department Information Division of Operations and Maintenance, Delta Field Division, Engineering Branch, Electrical/Mechanical Engineering Section, Byron Department of Water Resources (DWR) was established in 1956 by the California State Legislature. We manage California's water resources, systems, and infrastructure, including the State Water Project, in a responsible sustainable way. At DWR, we are embedding climate change response into every project we undertake. We have set standards to help evaluate how each project incorporates climate resilience principles and ensure consistency across the Department. Our mission is to sustainably manage the water resources of California, in cooperation with other agencies, to benefit the state's people and protect, restore, and enhance the natural and human environments. DWR also strives to create a trusting and welcoming workplace where employees embrace diverse viewpoints and treat each other with civility and respect. An important component of DWR's equal employment opportunity program centers around justice, equity, diversity, and inclusion. Department Website: ********************* Free virtual career consultation services including one-on-one DWR career consultations, application/resume review, tips for applying, and mock interviews, provided by DWR's Recruitment and Workforce Planning section can now be scheduled via *********************About/Careers. Special Requirements Must have ability to ascend/descend stairs, slopes and ladders to enter or exit vaults and structures as required for equipment access. Must possess a valid California Driver's License, class C, and operate vehicles on public roadways or travel to remote areas. Ability to move 30 pounds. Employee is required to successfully complete all safety training related to the functions of the job. All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences, and is free from discrimination. Must be capable of operating a personal computer as use of word processor, spreadsheet, database and cad software is necessary to perform the requirements of this position. Under the provisions of the North American Electric Reliability Corporation Critical Infrastructure Protection Standard CIP-004 as part of the Energy Policy of 2005, this position has authorized cyber access to, and/or unescorted physical access around, critical cyber assets and is subject to a satisfactory background check prior to appointment and every seven years thereafter. This position is not eligible for telework. Application Instructions Completed applications and all required documents must be received or postmarked by the Final Filing Date in order to be considered. Dates printed on Mobile Bar Codes, such as the Quick Response (QR) Codes available at the USPS, are not considered Postmark dates for the purpose of determining timely filing of an application. Final Filing Date: 1/9/2026 Who May Apply Individuals who are currently in the classification, eligible for lateral transfer, eligible for reinstatement, have list or LEAP eligibility, are in the process of obtaining list eligibility, or have SROA and/or Surplus eligibility (please attach your letter, if available). SROA and Surplus candidates are given priority; therefore, individuals with other eligibility may be considered in the event no SROA or Surplus candidates apply. Applications will be screened and only the most qualified applicants will be selected to move forward in the selection process. Applicants must meet the Minimum Qualifications stated in the Classification Specification(s). How To Apply Complete Application Packages (including your Examination/Employment Application (STD 678) and applicable or required documents) must be submitted to apply for this Job Posting. Application Packages may be submitted electronically through your CalCareer Account at ********************** When submitting your application in hard copy, a completed copy of the Application Package listing must be included. If you choose to not apply electronically, a hard copy application package may be submitted through an alternative method listed below: Address for Mailing Application Packages You may submit your application and any applicable or required documents to: Department of Water Resources Mailing Address Attn: Division of Human Resources P.O. Box 1079 Sacramento, CA 95812 Address for Drop-Off Application Packages You may drop off your application and any applicable or required documents at: Department of Water Resources Submit in Person Certification Desk 715 P Street, 7th floor Sacramento, CA 95814 08:00 AM - 04:30 PM Required Application Package Documents The following items are required to be submitted with your application. Applicants who do not submit the required items timely may not be considered for this job: * Current version of the State Examination/Employment Application STD Form 678 (when not applying electronically), or the Electronic State Employment Application through your Applicant Account at ********************** All Experience and Education relating to the Minimum Qualifications listed on the Classification Specification should be included to demonstrate how you meet the Minimum Qualifications for the position. * Resume is required and must be included. Applicants requiring reasonable accommodations for the hiring interview process must request the necessary accommodations if scheduled for a hiring interview. The request should be made at the time of contact to schedule the interview. Questions regarding reasonable accommodations may be directed to the EEO contact listed on this job posting. Desirable Qualifications In addition to evaluating each candidate's relative ability, as demonstrated by quality and breadth of experience, the following factors will provide the basis for competitively evaluating each candidate: * Experience preparing and reviewing as-built plans, specs, charts, maps and diagrams * Experience with instrumention components including relays, programmable logic controllers, sensors & transducers, etc * Experience with electrical inspections * Experience making engineering calculations * Experience with preventative maintenance activities on electrical equipment and systems * Experience preparing engineering reports * Knowledge of power generation or transmission * Knowledge of Hydro structures * Experience or knowledge of CAD (AutoCAD, Microstation, Solidworks, etc.) * Knowledge of generating and/or pumping plant equipment such as transformers, power circuit breakers, motors, pumps & hydraulics, etc * Experience providing recommendations for corrective actions * Experience reviewing testing of electrical and mechanical equipment * Experience preparing plans, technical specifications, schedules and cost estimates The successful candidate should have the ability to work cooperatively and collaboratively with others, maintain consistent and reliable attendance, and have excellent judgment. They should also be able to effectively communicate both verbally and in writing, and work proactively to analyze situations and take effective action to complete projects on time and within budget. Benefits Click here to read about the outstanding benefits offered to eligible employees. We offer full medical, dental, and vision benefits, as well as a retirement plan. Personal Leave Program 2025: Effective July 1, 2025, state employees are subject to temporary wage reductions in exchange for Personal Leave Program (PLP) accruals. The specific rate and hours earned were negotiated and agreed upon by each bargaining unit. The actual monetary impact of these temporary reductions can vary based on your bargaining unit and/or federal and state tax withholdings. For additional information please visit Human Resources Manual - CalHR Contact Information The Hiring Unit Contact is available to answer questions regarding the position or application process. Hiring Unit Contact: Eleanor Matuu ************** ************************** Please direct requests for Reasonable Accommodations to the interview scheduler at the time the interview is being scheduled. You may direct any additional questions regarding Reasonable Accommodations or Equal Employment Opportunity for this position(s) to the Department's EEO Office. EEO Contact: Office of Civil Rights ************** ************************ California Relay Service: ************** (TTY), ************** (Voice) TTY is a Telecommunications Device for the Deaf, and is reachable only from phones equipped with a TTY Device. Special Instructions To be considered, submit a completed State application (STD. 678) and resume online or to the address listed below. Please reference SAP Position #50002080 and Job Control #JC-500387 in the "examination(s) or job title(s) for which you are applying" section of your application. The following basis of eligibility will be considered: List eligibility, transfer, LEAP, reinstatement, and SROA/Surplus. Resumes, cover letters, and/or other attachments will not be accepted in lieu of a completed application. Click here to complete DWR's Recruitment Survey. This survey is for research purpose only and will not affect the application status. Examination/Assessment For more information about the State hiring process, click here. To learn more about how to get a State job, click here. List eligibility can be established by taking and passing the examination/assessment. Click the examination(s)/assessment(s) information link: ELECTRICAL ENGINEER Equal Opportunity Employer The State of California is an equal opportunity employer to all, regardless of age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding and related medical conditions), and sexual orientation. It is an objective of the State of California to achieve a drug-free work place. Any applicant for state employment will be expected to behave in accordance with this objective because the use of illegal drugs is inconsistent with the law of the State, the rules governing Civil Service, and the special trust placed in public servants.

Powell is a dynamic and innovative company that values collaboration, technical excellence, and professional growth. As an Electrical Engineer, you will elevate your career and make a significant impact by leading projects that craft cutting-edge solutions for diverse clients. At Powell, an Electrical Engineer holding a minimum of a bachelor's degree in electrical engineering, or a related engineering discipline with a focus on power and or control systems, will be the “technical face” on projects from concept to completion. You will be working with clients to design custom PLC, SCADA, HMI, RTU, and relay control panels to meet their technical specifications and quality standards within the constraints of the budget and the schedule. Additionally, an Electrical Engineer will learn industry standards and trends. Finally, you will join a team that fosters a supportive environment, continuous learning and development where your expertise will not only be appreciated but recognized and rewarded. Essential Responsibilities Design standard jobs with guidance to match client specifications and requirements Draft electrical construction drawings using AutoCAD in conjunction with our wiring teams Gain design knowledge to engineer various control and relay panels Work with your Supervisor and the Project Management team to help interpret project write-ups, client specifications, drawings, and other correspondence during the life of the project Create and validate Bills of Materials for client submittal and approval per Powell Standards Complete self-design reviews to verify accuracy and completeness of designs before issuing projects to Powell's manufacturing floor for construction Gain the ability to provide technical support in client meetings Coordinate with purchasing and suppliers to specify & approve component parts and assemblies Provide prompt notification to supervisor and project management for issues that impact scope, budget, and schedule Coordinate with the electrical design team for the final design and construction package to include schematics and wiring diagrams of the project Create AC and DC schematics, door component layouts, wiring diagrams, and communication drawings for project approval, construction and As-Built's drawing submittals Provide technical support as necessary for sales, application engineering, and inspection teams throughout the life of the project Assist fellow production engineers in solving problems on a daily basis Adhere to Powell's policies and procedures, work instructions, ISO policies, Safety Rules and Regulations Meet regularly with clients, suppliers and OEMs Required Experience Is Proportionate With the Selected Job Level The Engineer level requires a Bachelor's degree in an engineering discipline and 0-3 years of relevant job related experience The Senior Engineer level requires a Bachelor's degree in an engineering discipline and 4-8 years of relevant job related experience The Lead Engineer level requires Bachelor's degree in an engineering discipline and 7-10 years of relevant job related experience Minimum Qualifications BS Degree in Electrical Engineering, Electrical Technology or related area Minimum 1-3 years of experience in an Engineering role Ability to draft in AutoCAD Proficient with electrical design in PLC, SCADA, and relay control panels Basic understanding of power system, SCADA system, communications, and relay applications as applied to products Preferred Qualifications Previous experience with control panels Skills, Abilities & Other Requirements Ability to manage & prioritize multiple projects, schedules and budgets in a fast-paced environment Solid organization, communication, presentation and planning skills Ability to carry out engineering development types of tasks and address production issues Demonstrated ability to work collaboratively with others in a cross-functional team environment Strong problem-solving skills, and the ability to troubleshoot system-level problems Basic understanding of communication drawings and point to point wiring diagrams Basic understanding to being very proficient with power distribution equipment (switchgear relays, PCR, E-Houses, etc.) Able to apply applicable sections of the National Electric Code and other codes and standards such as IEEE, ANSI and UL in day-to-day activities Able to form and apply cost competitive techniques to develop the most cost-effective solution for the engineered to order product Possess a strong customer service commitment Basic understanding to being very proficient at drawing reviews (i.e., acquired knowledge of specification items that Powell should take exception to and specification items that require special attention; able to accurately interpret client specifications, etc.) Working & Environmental Conditions The employee typically performs duties in a normal office environment. There will be some work in a shop environment and exposure to the elements of our shop. Additionally there may be some work performed in the field with exposure to construction sites or active customer facilities. It is the policy of Powell Industries to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel, carry or operate objects, tools or controls and reach with hands and arms. The employee frequently is required to stand; talk or hear; walk; sit. Specific vision abilities required by this job include close vision and the ability to adjust focus. More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties #LI-BH3

Systems Electrical Engineer (II-Sr.) [Applications will be considered in the order they are submitted.] Provo City is looking for a full-time Utility Electrical Engineer to provide professional engineering work responsible to coordinate, plan, design, estimate, and prepare specifications for building electrical distribution/transmission systems in Provo City's Energy department. Civic-minded individuals interested in supporting these services provided to the residents of Provo City are strongly encouraged to apply. Job Details What is the compensation? (G37, G40) $90,592 - $144,567 per annum (depending on experience) Provo City offers generous employer-paid health insurance; retirement and pension plans, including 401k and 401k matching; paid leaves, including vacation, sick, holidays, bereavement, and parental leaves; educational assistance; competitive pay; and regular review of compensation practices to remain competitive with the market. Employees also receive great perks: free use of the Provo Recreation Center and Peaks Ice Arena, a Provo Library card, 50% off green fees at Timpanogos Golf Course, a 4/10 work schedule , and others. For more information about benefits click here. What are the main duties? Prepare specifications and perform engineering design for electrical systems, including transmission and distribution lines, substations, and related facilities. Conduct electrical system analyses and studies (load flow, short circuit, load forecasting, relay and fuse coordination, etc.). Review, approve, and maintain complex electrical plans, models, and records, ensuring compliance with applicable standards, codes, and NERC reliability requirements. Oversee updates to electrical maps, as-built drawings, and system documentation. Plan, coordinate, and manage assigned capital improvement projects (CIP) to ensure adherence to specifications, timelines, and budgets. Develop detailed project plans, monitor progress, and provide regular status and cost reports. Coordinate with consultants, contractors, utilities, developers, and internal crews to ensure project efficiency and cost effectiveness. Maintain full accountability for project budgets, schedules, staffing, and resources. Recommend and implement system operating procedures. Monitor system performance, reliability, and cost effectiveness. Conduct field inspections, testing, and troubleshooting for operational and power quality issues. Support construction management, inventory, and field operations as needed. Supervise and train assigned personnel, including scheduling, workload management, performance evaluation, and discipline when required. Assist in staffing decisions and may serve as Acting Operations Manager when needed. Participate in departmental strategic planning and recommend projects to enhance system integrity and efficiency. Develop and maintain policies, procedures, and construction/reliability standards to support consistent project and operational quality. Ensure compliance with all regulatory and safety standards. Perform related duties and support lower-level staff as required. What are the minimum qualifications? (Please click the links below for the full classification specifications.) Provo City will honor equivalent combinations of job-related education/experience [substituting each 1 year of post-secondary education/training for 6 months of experience] as meeting minimum qualifications. At All Levels Bachelor's Degree in Electrical Engineering or closely related field. A valid, lawful Driver License is required. Level II Three years of experience at Systems Electrical Engineer I level. Fundamentals of Engineering (FE) certificate. Senior Four years of experience at Systems Electrical Engineer II level. State Professional Engineer license is required (State of Utah within one year). What is the selection process? This position is open until filled and will be closed when sufficient, qualified applications to proceed with a competitive selection process have been received (at least seven days). Applications will be reviewed in the order they are submitted. Applicants must meet the minimum qualifications listed above to be eligible for consideration. If selected for hire, candidate will be required to successfully pass a drug screen and criminal background check. Non-disclosure may result in dismissal. Applicants with unsatisfactory drug screen results will be ineligible for appointment or application to any Provo City position for a minimum period of six (6) months. Why Provo City? Provo City has a vision for continued prosperity based on citizen priorities. To deliver on those priorities, the Administration developed a brand promise to establish the high standards of our community identifies as the Provo Pillars: Welcoming, Safe and Sound, Economically Vibrant, and Forward Looking, together we are building a strong foundation for a community that is honored both nationally and locally. Provo is consistently recognized nationally for its outstanding quality of life, well-being, and as a beautiful place to live. Provo has been awarded the “Best Performing City” three years in a row, and we were ranked the ‘Best Run City in America' by WalletHub for 2025. Visit provo.gov to learn more! Provo City is an Equal Employment Opportunity employer. Full Time/Part Time: Full time Position Type: Regular Scheduled Hours: 40

Systems Electrical Engineer (II-Sr.) [Applications will be considered in the order they are submitted.] Provo City is looking for a full-time Utility Electrical Engineer to provide professional engineering work responsible to coordinate, plan, design, estimate, and prepare specifications for building electrical distribution/transmission systems in Provo City's Energy department. Civic-minded individuals interested in supporting these services provided to the residents of Provo City are strongly encouraged to apply. Job Details What is the compensation? (G37, G40) $90,592 - $144,567 per annum (depending on experience) Provo City offers generous employer-paid health insurance; retirement and pension plans, including 401k and 401k matching; paid leaves, including vacation, sick, holidays, bereavement, and parental leaves; educational assistance; competitive pay; and regular review of compensation practices to remain competitive with the market. Employees also receive great perks: free use of the Provo Recreation Center and Peaks Ice Arena, a Provo Library card, 50% off green fees at Timpanogos Golf Course, a 4/10 work schedule, and others. For more information about benefits click here. What are the main duties? * Prepare specifications and perform engineering design for electrical systems, including transmission and distribution lines, substations, and related facilities. * Conduct electrical system analyses and studies (load flow, short circuit, load forecasting, relay and fuse coordination, etc.). * Review, approve, and maintain complex electrical plans, models, and records, ensuring compliance with applicable standards, codes, and NERC reliability requirements. * Oversee updates to electrical maps, as-built drawings, and system documentation. * Plan, coordinate, and manage assigned capital improvement projects (CIP) to ensure adherence to specifications, timelines, and budgets. * Develop detailed project plans, monitor progress, and provide regular status and cost reports. * Coordinate with consultants, contractors, utilities, developers, and internal crews to ensure project efficiency and cost effectiveness. * Maintain full accountability for project budgets, schedules, staffing, and resources. * Recommend and implement system operating procedures. * Monitor system performance, reliability, and cost effectiveness. * Conduct field inspections, testing, and troubleshooting for operational and power quality issues. * Support construction management, inventory, and field operations as needed. * Supervise and train assigned personnel, including scheduling, workload management, performance evaluation, and discipline when required. * Assist in staffing decisions and may serve as Acting Operations Manager when needed. * Participate in departmental strategic planning and recommend projects to enhance system integrity and efficiency. * Develop and maintain policies, procedures, and construction/reliability standards to support consistent project and operational quality. * Ensure compliance with all regulatory and safety standards. * Perform related duties and support lower-level staff as required. What are the minimum qualifications? (Please click the links below for the full classification specifications.) Provo City will honor equivalent combinations of job-related education/experience [substituting each 1 year of post-secondary education/training for 6 months of experience] as meeting minimum qualifications. At All Levels * Bachelor's Degree in Electrical Engineering or closely related field. * A valid, lawful Driver License is required. Level II * Three years of experience at Systems Electrical Engineer I level. * Fundamentals of Engineering (FE) certificate. Senior * Four years of experience at Systems Electrical Engineer II level. * State Professional Engineer license is required (State of Utah within one year). What is the selection process? This position is open until filled and will be closed when sufficient, qualified applications to proceed with a competitive selection process have been received (at least seven days). Applications will be reviewed in the order they are submitted. Applicants must meet the minimum qualifications listed above to be eligible for consideration. If selected for hire, candidate will be required to successfully pass a drug screen and criminal background check. Non-disclosure may result in dismissal. Applicants with unsatisfactory drug screen results will be ineligible for appointment or application to any Provo City position for a minimum period of six (6) months. Why Provo City? Provo City has a vision for continued prosperity based on citizen priorities. To deliver on those priorities, the Administration developed a brand promise to establish the high standards of our community identifies as the Provo Pillars: Welcoming, Safe and Sound, Economically Vibrant, and Forward Looking, together we are building a strong foundation for a community that is honored both nationally and locally. Provo is consistently recognized nationally for its outstanding quality of life, well-being, and as a beautiful place to live. Provo has been awarded the "Best Performing City" three years in a row, and we were ranked the 'Best Run City in America' by WalletHub for 2025. Visit provo.gov to learn more! Provo City is an Equal Employment Opportunity employer. Full Time/Part Time: Full time Position Type: Regular Scheduled Hours: 40

Seattle City Light's Generation Electrical Engineering Section is seeking two high performing, licensed Professional Electrical Engineers, from any state, to join our team. We have a great variety of interesting and challenging projects to work on and are pleased to advertise these positions. If you're bringing your PE from another state, you will have one year to obtain your Washington State PE by exam or comity. One of our positions is located in Newhalem, Washington. As the selected engineer, you will report to Newhalem, Washington and be assigned to support the day-to-day operations of the three power plants of the Skagit Hydroelectric Project. The Skagit project is in the North Cascades National Park and you will have the option to live in the company town of Newhalem depending on available space. Our other position is located in downtown Seattle. As the selected engineer, you will report to Seattle Municipal Tower. With both positions, in addition to day-to-day support, you will be assigned capital projects to design and work collaboratively with field crews to install and test new equipment related to their design. We are interested in individuals with a positive attitude, good people skills and broad experience working on hydroelectric generation facilities. This position reports to the Generation Electrical Engineering Supervisor. Seattle City Light, a department of the City of Seattle, is one of the nation's largest municipally owned utilities in terms of the number of customers served. Over the years we have worked very hard to keep Seattle's electricity affordable, reliable, and environmentally sound. Today, City Light is a recognized national leader in energy efficiency and environmental stewardship. Here is more about what you'll be doing: The successful candidate will be assigned to work on projects based on their experience and project needs, and could be asked to work on any of the following: * Hydroelectric generators, transformers, circuit breakers, governors, and exciters. * Balance of plant (BOP) equipment such as batteries, and AC power distribution and SCADA systems * Plant Controls, Automation, and Relay Protection * Equipment associated auxiliary systems including hydraulic power units, standby generators, and compressors. * Spillway and intake gates controls. * Troubleshooting, commissioning, inspection, and installation of electrical systems. * Lead technical role working with on-site skilled trades. * Design review and stamping of electrical design packages. * Project estimating, developing, and presenting proposals. * Condition assessment, performance monitoring, data analysis and preventative maintenance in hydroelectric generating stations. * Leading multidisciplinary design teams. * Managing projects and several concurrent mandates on schedule, and within budget. * NERC reliability standards as they relate to the operation of Bulk Electric System assets. * Committed to safe work practices and experience working with safe work procedures. * Excellent communication and report writing skills. Required Qualifications: In addition to the skills and experience mentioned below, a successful applicant will have experience that reflects a commitment to creating fair and equitable outcomes and has: Education: A Bachelor of Science degree in Electrical Engineering. Experience: Total of 6 years of progressively responsible, difficult and highly complex electrical engineering experience in the Power Industry. (or other combinations of education and/or experience which provide preparation to do professional electrical engineering work on major electrical power systems). Certification/License: * Registration as a Professional Electrical Engineer in the State of Washington is required. If you are licensed in another state, you may obtain your Washington PE by exam or comity within 12 months of hire. * Current Washington State Driver's License or evidence of equivalent mobility. Desired Qualifications - You will be successful if you have the following experience, skills, and abilities: * Experience working with hydroelectric generators, and associated Exciters, Governors, Relay Protection, Plant Controls and Automation is highly desired. * Experience with and recognition of values associated with excellent customer service. * Knowledge of and direct experience with NERC reliability standards as they relate to the operation of Bulk Electric System assets. * Operations experience with remote generating facilities * Experience in legacy electrical systems and equipment * Good interpersonal, technical writing and oral communication skills. * Proficient using AutoCAD to prepare Engineering Design Packages. Please note this job advertisement is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Application Process Please submit the following with your online application: * A cover letter in which you clearly describe how your knowledge, experience, skills, and abilities prepare you for the job responsibilities and qualifications outlined in the job announcement * A current resume of your educational and professional work experience. Incomplete applications may not be considered. The full salary range for this position is $76.38 - $89.65 per hour. Who May Apply: This position is open to all candidates that meet the qualifications. Seattle City Light values diverse perspectives and life experiences. Applicants will be considered regardless of race, color, creed, national origin, ancestry, sex, marital status, disability, religious or political affiliation, age, sexual orientation, or gender identity. Seattle City Light encourages people of all backgrounds to apply, including people of color, immigrants, refugees, women, LGBTQIA+, people with disabilities, veterans, and those with diverse life experiences. Job offers are contingent on the verification of credentials and other information required by the employment process, including the completion of a background check. The background check will involve a criminal history check, which includes conviction and arrest records in compliance with the Seattle's Fair Chance Employment Ordinance, SMC 14.17 and the City of Seattle Personnel Rule 10.3. A driving history review may be conducted in compliance with SMC 4.79.020. Applicants will be provided an opportunity to explain or correct background information. The City of Seattle offers a comprehensive benefits package including vacation, holiday, and sick leave as well as medical, dental, vision, life and long-term disability insurance for employees and their dependents. More information about employee benefits is available on the City's website at: *********************************************************************************************************** Want to know more about Seattle City Light? Check out our web page: ****************************************************

RK&K is seeking an experienced and licensed Electrical or Controls System Project Engineer. to assist with electrical and instrumentation/control (I&C) design efforts for water and wastewater infrastructure projects. This is an exciting opportunity for an engineering professional with a background in treatment plant upgrades, pump stations, and related systems. Essential Functions Work with electrical and I&C design team for water/wastewater projects including treatment plants and pump stations Design, size, and specify electrical and I&C equipment Conduct technical evaluations and support planning and design of electrical and control systems Prepare and review technical memoranda, proposals, reports, drawings, specifications, and contract documents Provide field services and support investigations as needed Assist with documentation and support for facility startup and commissioning Collaborate with clients, utility owners, and multidisciplinary project teams Develop detailed engineering cost estimates Travel occasionally for short durations as required Required Skills and Experience Bachelor's degree in electrical engineering or a closely related field Active Professional Engineer (P.E.) license in Electrical and Control System 4+ years of progressive experience in electrical or I&C systems design, construction, and commissioning for water and wastewater facilities Control panel design and instrumentation selection PLC and SCADA systems design Electrical/I&C drawings development Piping and instrumentation diagrams (P&IDs) development Microsoft Office Suite (Word, Outlook, Project, Excel, PowerPoint) AutoCAD, SCADA systems including PLCs, HMI software, servers, and workstations Familiarity with the National Electrical Code (NEC) and NFPA 820 codes Strong technical writing and communication abilities Excellent organizational and documentation skills Ability to work independently and collaboratively Problem-solving mindset with a focus on practical solutions Other Duties This job description indicates the general nature and levels of work, knowledge, skills, abilities, and other essential functions (as covered under ADA). It is not designed to cover or contain a comprehensive listing of all activities and duties required by the employee. Other duties are assigned as required . What We Offer RK&K provides outstanding opportunities for career growth and professional development, along with a competitive compensation and benefits package, including: Paid time off and holidays Hybrid work options (home and office) Tuition reimbursement Comprehensive health, dental, vision, life, and disability insurance 401(k) with company match And much more! Why RK&K? RK&K is a trusted, full-service engineering and construction management firm with over 100 years of excellence. Our award-winning culture fosters collaboration, innovation, and community impact. We deliver successful outcomes through trusted partnerships and responsive service. Design your career at RK&K, Apply Today!

RK&K is seeking an experienced and licensed Electrical or Controls System Project Engineer. to assist with electrical and instrumentation/control (I&C) design efforts for water and wastewater infrastructure projects. This is an exciting opportunity for an engineering professional with a background in treatment plant upgrades, pump stations, and related systems. Essential Functions Work with electrical and I&C design team for water/wastewater projects including treatment plants and pump stations Design, size, and specify electrical and I&C equipment Conduct technical evaluations and support planning and design of electrical and control systems Prepare and review technical memoranda, proposals, reports, drawings, specifications, and contract documents Provide field services and support investigations as needed Assist with documentation and support for facility startup and commissioning Collaborate with clients, utility owners, and multidisciplinary project teams Develop detailed engineering cost estimates Travel occasionally for short durations as required Required Skills and Experience Bachelor's degree in electrical engineering or a closely related field Active Professional Engineer (P.E.) license in Electrical and Control System 4+ years of progressive experience in electrical or I&C systems design, construction, and commissioning for water and wastewater facilities Control panel design and instrumentation selection PLC and SCADA systems design Electrical/I&C drawings development Piping and instrumentation diagrams (P&IDs) development Microsoft Office Suite (Word, Outlook, Project, Excel, PowerPoint) AutoCAD, SCADA systems including PLCs, HMI software, servers, and workstations Familiarity with the National Electrical Code (NEC) and NFPA 820 codes Strong technical writing and communication abilities Excellent organizational and documentation skills Ability to work independently and collaboratively Problem-solving mindset with a focus on practical solutions Other Duties This job description indicates the general nature and levels of work, knowledge, skills, abilities, and other essential functions (as covered under ADA). It is not designed to cover or contain a comprehensive listing of all activities and duties required by the employee. Other duties are assigned as required . What We Offer RK&K provides outstanding opportunities for career growth and professional development, along with a competitive compensation and benefits package, including: Paid time off and holidays Hybrid work options (home and office) Tuition reimbursement Comprehensive health, dental, vision, life, and disability insurance 401(k) with company match And much more! Why RK&K? RK&K is a trusted, full-service engineering and construction management firm with over 100 years of excellence. Our award-winning culture fosters collaboration, innovation, and community impact. We deliver successful outcomes through trusted partnerships and responsive service. Design your career at RK&K, Apply Today!

Brown and Caldwell (BC) has an exciting opportunity for a Mid-Level Electrical Engineer to join our growing team. Low and Medium Voltage power distribution, Controls, and Instrumentation Design, are services in high demand from our clients. This is an extraordinary opportunity for a mid-level engineer to continue to build upon their engineering career, do challenging and meaningful work, and protect the earth's resources at the same time. Hybrid work from one of our offices in Phoenix, Irvine, Las Vegas, Los Angeles, or San Diego is allowed. Detailed Description: For the right candidate, this position offers the opportunity for significant professional growth and the potential to collaborate with local and national teams. The candidate will have a broad range of responsibilities, which includes interacting with clients, leading electrical projects, and participating in new business development. In this role, your primary design delivery responsibilities will include conceptual design development, layout and selection of equipment, development of contract drawings using 2D and 3D design approaches, bid package preparation, field investigations, electrical and I&C design, and support during construction both in the office and in the field. We are looking for candidates who have a passion for building things, meeting new people, and desire to work with seasoned professionals who perform industrial, municipal, and other water/wastewater related work. Job Responsibilities Expectations: * Serve as a project task manager or perform as lead discipline (electrical and I&C) person on projects as appropriate. * Scope and budget projects, identify method of project execution and coordinate staff assignments. * Successfully manage and execute electrical design and be on time and on budget using company systems and tools. * Support business opportunities and assist in sales and marketing efforts (proposal preparation, interviewing, scope, fee, etc.). * Mentor and possibly supervise other electrical and I&C engineers and designers. * Perform contractor construction submittal reviews and Request For Information (RFI) documents and general electrical design activities for plant and pump station power systems. * Producing effective and accurate written documents, reports, and technical memorandums. * Collaborate with a national team of technical experts in the Electrical and I&C group. * Ability to travel occasionally to project sites and for client meeting both locally and out of Desired Skills and Experience: * BS in Electrical Engineering. * Professional registration. * Minimum of 5 years' experience as an Electrical Engineer working for government, municipal, and/or industrial water and wastewater industries preferred. * Experience in electrical power systems design and specifications, which include service entrance, feeder and branch circuits, lighting, grounding, power distribution and standby power equipment, and associated systems studies and calculations. * Solid knowledge in the application of the National Electrical Code. * Solid knowledge and understanding of electrical safety , NFPA 70E. * Effective oral and written communication. * Able to multi-task, be enthusiastic, be self-motivated, and work independently with a willingness to learn. * Candidate should be a self-starter, results-oriented, take ownership of their work, and be able to work under tight and pressured deadlines from time to time. Salary Range: The anticipated starting pay range for this position is based on the employee's primary work location and may be more or less depending upon skills, experience, and education. These ranges may be modified in the future. Location A: $97,000- $132,000 Location B: $106,000- $145,000 You can view which BC location applies to you here. If you have any questions, please speak with your Recruiter. Benefits and Other Compensation: We provide a comprehensive benefits package that promotes employee health, performance, and success which includes medical, dental, vision, short and long-term disability, life insurance, an employee assistance program, paid time off and parental leave, paid holidays, 401(k) retirement savings plan with employer match, performance-based bonus eligibility, employee referral bonuses, tuition reimbursement, pet insurance and long-term care insurance. Click here to see our full list of benefits. About Brown and Caldwell Headquartered in Walnut Creek, California, Brown and Caldwell is a full-service environmental engineering and construction firm with 50 offices and 2,100 professionals across North America and the Pacific. For 75 years, we have created leading-edge environmental solutions for municipalities, private industry, and government agencies. We strive to be the company of choice-to our clients, who benefit from our passion for delivering exceptional quality, and to our employees, present and future, who share our commitment to client service, collaboration, and innovation. Join us, and you will find a home where you can do your best work, reach new levels of expertise, and enjoy exceptional development opportunities. For more information, visit ************************ This position is subject to a pre-employment background check and a pre-employment drug test. Notice to Third Party Agencies: Brown and Caldwell does not accept unsolicited resumes from recruiters or employment agencies. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement and approved engagement request with Brown and Caldwell, Brown and Caldwell reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Brown and Caldwell is proud to be an EEO/AAP Employer. Brown and Caldwell encourages protected veterans, individuals with disabilities, and applicants from all backgrounds to apply. Brown and Caldwell ensures nondiscrimination in all programs and activities in accordance with Title VI of the Civil Rights Act

At Powell, we're committed to enhancing lives by delivering reliable power distribution systems across diverse markets, from industrial to renewables. As a global leader, we prioritize our Core Values-Customer First, Respect for Employees, Continuous Improvement, and a “Can-Do” Attitude-to provide innovative, cost-effective solutions that power communities worldwide. Join us to be part of a team dedicated to solving real-world challenges and shaping the future of energy. Internship Overview Powell's 10-week paid internship program offers college students hands-on experience, professional training, and the opportunity to make an impact through a meaningful project aligned with your field of study. As an Electrical Engineering Intern, you'll focus on numerous applications, gaining valuable skills in a dynamic, collaborative environment. Project Focus Intern Project: The Electrical Engineering internship will be focused on Understanding Powell PCR/Module applications while learning the engineering process for Powell Industries. Ideal applicants will be pursuing a degree in Electrical and or Mechanical Engineering. Expected Deliverables: Review/ Release As-Built drawings: Comments /Mark-ups on As-built PCR drawings. Review/ Release Cable Schedule and Equipment list. Input/ release Cable and cable tray take offs for purchasing in Powell Systems Develop Equipment layout drawings per applicable code and project standards. Input/release Equipment for purchasing in Powell Systems. Read/ review customer Specifications, upload project clarifications to Powell Project site and participate in a Project Kick off meeting. Develop a PCR Specification doc for through use of the Powell Specification program. Walkthrough and use of PCR check sheets. How does this project benefit Powell or your functional area? Future hire that will be able to step in and make contribution within the first 3 months of hiring date. By having new individuals go through and be trained on Powell's systems, it allows Powell's process to be reviewed and shown where improvements can be made. Desired Major: Currently pursuing a 4 year degree from an accredited institution BS EE or Electrical Design/ drafter Rising Junior or Senior level students continuing their studies in the fall semester Possess multi-tasking abilities and strong inter-personal skills. High Motivation What You'll Gain Hands-On Experience: Work on real-world engineering challenges with cutting-edge technology. Mentorship: Collaborate with and learn from experienced engineers and business leaders. Professional Growth: Enhance your technical and interpersonal skills in a team-oriented setting. Networking: Engage with industry professionals and participate in fun social events. Community Impact: Contribute to Powell's mission of powering communities globally. Who We're Looking For We seek motivated, curious, and driven students with the following qualifications: Pursuing a bachelor's degree in Mechanical Engineering, Electrical Engineering Rising Junior or Senior continuing studies in Fall 2027. Minimum 3.0 GPA and strong academic standing. Team player with strong communication, multitasking, and interpersonal skills. Self-starter with a dependable, can-do attitude. Bonus Skills: Experience with CAD (e.g., SolidWorks, AutoCAD) or Finite Element Analysis (FEA). Program Benefits Competitive pay for a 10-week summer internship. Exposure to a collaborative team environment and meaningful projects. Opportunities to interact with Powell's leadership team. Fun social events and community involvement activities. Successful Tips Update your resume to highlight relevant coursework, projects, GPA, and experience reading drawings. Emphasize your academic background and experience, teamwork, communication, and problem-solving skills. Be ready to discuss your technical skills, teamwork experiences, and interest in Powell. Join Powell and make a difference in the world of energy! Important Notes Sponsorship: Powell is unable to provide sponsorship for H1-B, F1, or OPT visas at this time. Join Powell and make a difference in the world of energy!

Under direct supervision, this position performs routine semi-skilled work in the maintenance and repair of city buildings and facilities. Position provides works as a helper and provides assistance to higher level trades workers in more complex electrical repair and installation activities. Reports to Senior Electrician. ESSENTIAL JOB FUNCTIONS Performs semi-skilled electrical work maintaining, repairing and ensuring the working condition of electrical systems in city buildings and facilities; uses a variety of tools and equipment to include voltmeter, ohmmeter, ammeter, genie boom, drills, and saws and hand tools. Prepares site for repair and/or installation work; repairs and installs new parts and systems for lights, electrical receptacles, electrical panels and wiring, ballasts, and building electrical systems; removes or repairs damaged parts. Loads and unloads electrical supplies and equipment on trucks; transports equipment, supplies and materials to other facilities as needed; cleans work area; assists general maintenance crew with moving furniture, and assists with installation of phone cable and computer wires. Performs other duties as assigned. Electrical - Through knowledge of electrical systems, fixtures and equipment. Through knowledge of procedures, methods and techniques to design, install, repair and maintain a variety of electrical systems. Knowledge of National Electrical Codes. Equipment Operation - Thorough knowledge of the proper procedures for operating, inspecting and maintaining tools and related equipment as needed to construct and maintain properties and equipment. Knowledge of laws and regulations governing the operation of equipment and materials. Safety - Knowledge of occupational hazards, safety precautions, and safety regulations related to equipment operation, hazardous materials, traffic patterns and conditions, and other work related precautions. Interpersonal Relationships/Customer Service - Develops and maintains cooperative and professional relationships with employees, representatives from other departments and organizations, and the public. Judgment/Decision Making - Uses logic and reasoning to understand, analyze, and evaluate situations and exercise good judgment to make appropriate decisions. Time Management - Plans and organizes daily work routine. Estimates expected time of completion of elements of work and establishes a personal schedule accordingly. Implements work activities in accordance with priorities and estimated schedules. Computer Skills - Ability to utilize personal computer applications to include database administration, work processing, spreadsheet, and related software. ? Communication - Ability to communicate ideas effectively, including the preparation of reports and logs. Ability to listen and understand directions, information and ideas presented verbally and in writing. Ability to handle a variety of customer service issues with tact and diplomacy and in a confidential manner. High school diploma or the equivalent with additional training in the maintenance and repair of electrical systems, and 1 - 2 years of experience performing electrical repairs and maintenance; or any equivalent combination of training and experience which provides the required skills, knowledge and abilities.Physical Requirements: Must be physically able to operate a variety of equipment and tools to include electrical meters, saws, and hand tools. Must be able to exert up to 50 pounds of force occasionally, and/or up to 25 pounds of force frequently and/or up to 10 pounds of force constantly to move objects. Physical demand requirements are for Medium Work. Data Conception: Requires the ability to compare and/or judge the readily observable, functional, structural, or compositional characteristics (whether similar to or divergent from obvious standards) of data, people or things. Interpersonal Communications: Requires the ability of speaking and/or signaling people to convey or exchange information. Includes receiving instructions, assignments and directions from superiors. Language Ability: Requires the ability to read work orders, electrical diagrams and electrical code. Requires the ability to prepare time sheets and leave slips using prescribed format. Requires the ability to communicate effectively and efficiently using standard English, and electrical terminology. Intelligence: Requires the ability to apply common sense understanding to carry out instructions furnished in written, oral or diagrammatic form; to deal with problems involving several concrete variables in or from standardized situations. Verbal Aptitude: Requires the ability to record and deliver information, to explain procedures, to follow oral and follow oral and written instructions. Must be able to communicate effectively. Numerical Aptitude: Requires the ability to utilize mathematical formulas. Must be able to add, subtract, multiply, and divide. Form/Spatial Aptitude: Requires the ability to inspect items for proper length, width and shape. Motor Coordination: Requires the ability to coordinate hands and eyes rapidly and accurately in using electrical equipment and hand tools. Manual Dexterity: Requires the ability to handle a variety of items, such as electrical equipment and hand tools. Must have minimal levels of eye/hand/foot coordination. Color Discrimination: Requires the ability to differentiate between colors and shades of color. Interpersonal Temperament: Requires the ability to deal with people beyond giving and receiving instructions. Must be adaptable to performing under minimal levels of stress. Physical Communication: Requires the ability to talk and/or hear: (talking - expressing or exchanging ideas by means of spoken words; hearing - perceiving nature of sounds by ear).

Manager of Engineering - Electric Utility Industry Since 1949, Lea County Electric Cooperative (LCEC) has been a trusted provider of energy, serving over 7,000 members in six counties across New Mexico and Texas. We pride ourselves on our commitment to community values, fostering employee growth, offering competitive pay, and providing a comprehensive benefits package within a collaborative workplace culture. Role Overview As the Manager of Engineering at LCEC, you will lead efforts to ensure the reliability, efficiency, and long-term success of our electrical distribution system. This leadership role is ideal for an innovative professional dedicated to advancing energy solutions for our community. Responsibilities System Analysis and Strategy Assess the performance of our electrical distribution infrastructure. Design and implement a four-year maintenance and construction plan to optimize system operations. Team Collaboration for Efficiency Partner with the engineering team to analyze load flow, short circuit scenarios, and protective relaying schemes. Oversee studies on voltage regulation, arc flash safety, and system coordination to enhance network performance. Future Planning and Growth Anticipate system demands and design strategies for infrastructure upgrades to support business expansion and increasing energy loads. Qualifications The ideal candidate will bring: A Bachelor's degree in electrical engineering. Proven experience in the electrical utility industry. Strong expertise in advanced mathematics, including trigonometry, calculus, algebra, and analytic geometry. Familiarity with Schweitzer Engineering Laboratories equipment or similar systems (preferred). Understanding of NERC and FERC regulations, with experience in SPP considered an asset. Outstanding problem-solving, organizational, and communication skills. A valid New Mexico driver's license and compliance with drug testing policies. Work Schedule and Benefits Hours: Monday through Friday, 8:00 AM - 5:00 PM (can vary at times), promoting work-life balance. Compensation: Competitive salary paired with an extensive benefits package, including: Medical, dental, and vision coverage on day one. Life insurance and long-term disability. Aflac options. Employer-funded pension. Educational assistance programs. 401(k) plan with an 8% employer contribution after one year of service. How to Apply If you're passionate about contributing to the success of Lea County Electric Cooperative and meet the required qualifications, we encourage you to submit your application. Lea County Electric Cooperative, Inc., is proud to be an Equal Opportunity Employer. Take the next step in your career and make a meaningful impact on the community's energy future-apply now!

Candidate will provide electrical engineering and design for water and wastewater facility projects, serving as lead electrical engineer when required. Qualified candidate must have knowledge in industrial power design, including medium and low voltage electrical power distribution, motor control, VFDs, lighting systems, equipment layout and related activities. Candidate must have a good working knowledge of the NEC and related Codes. Candidate must possess strong communication skills, including ability to interact with clients, contractors, and other engineers. Responsibilities Include: Supervision of less experienced staff on a project Coordination with engineers of other disciplines Conducting field inspections of completed installations Conducting field visits as part condition assessments and/or design Additional Qualifications Required: Experience and proficiency with Autocad software Experience and proficiency with SKM and/or ETAP software Working knowledge of Revit BIM software 5-15 years in industrial electrical engineering and design Bachelor of Science in Electrical Engineering, or related bachelor of science degree Professional Engineering License Ability to be licensed in additional states at request of Company Experience with instrumentation and control systems is a plus, including field and panel instruments, operator interfaces, and PLCs. Experience within the water and wastewater industry is highly desirable. We provide a comprehensive benefits package which includes employer paid life insurance, 401k employer contribution (after 1 year of service), performance bonus, comprehensive family medical, dental and vision insurance, paid time off, holidays, short-term and long-term disability, paid parental leave (after 1 year of service), employee assistance and wellness programs. Typical starting pay range for this position depends on skills, experience, education and geographical location.