Manufacturing Assembler jobs at Honeywell

The Impact You'll Make in this Role The 3M Valley plant is located just ten miles west of Omaha, NE. As a Temporary Manufacturing Associate, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact by: Following operating procedures and customer specifications to produce quality products which are delivered to customers on time Working effectively within a production work team and collaborating with other teams Contributing to continuous improvement and problem solving Operating assigned equipment in a safe, effective, and efficient manner, including maintaining a neat and orderly work area Operating processes according to procedures Inspecting and packaging product according to standards Using computers as needed to run process operation Monitoring other operations and works cooperatively with others Your Skills and Expertise To set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications: Possess a High School Diploma/GED or higher (completed prior to start) Applicants meeting the basic qualifications above may be required to take and pass 3M elected testing as a part of the selection process Pay Competitive Salary: The starting rate of pay for this position is $18.25/hour. This targeted starting salary represents a good faith estimate and can vary based on factors including, but not limited to, job-related knowledge, skills, and experience. Other benefits and incentives may apply; pay and benefits overview: This information is being disclosed in accordance with local Pay Transparency Rules. Work location: Valley, NE Travel: No travel Relocation Assistance: Not authorized Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status). Responsibilities of this position may include direct and/or indirect physical or logical access to information, systems, technologies subjected to the regulations/compliance with U.S. Export Control Laws. U.S. Export Control laws and U.S. Government Department of Defense contracts and sub-contracts impose certain restrictions on companies and their ability to share export-controlled and other technology and services with certain "non-U.S. persons" (persons who are not U.S. citizens or nationals, lawful permanent residents of the U.S., refugees, "Temporary Residents" (granted Amnesty or Special Agricultural Worker provisions), or persons granted asylum (but excluding persons in nonimmigrant status such as H-1B, L-1, F-1, etc.) or non-U.S. citizens. To comply with these laws, and in conjunction with the review of candidates for those positions within 3M that may present access to export controlled technical data, 3M must assess employees' U.S. person status, as well as citizenship(s). The questions asked in this application are intended to assess this and will be used for evaluation purposes only. Failure to provide the necessary information in this regard will result in our inability to consider you further for this particular position. The decision whether or not to file or pursue an export license application is at 3M Company's sole election. Collaborate with Innovative 3Mers Around the World Choosing where to start and grow your career has a major impact on your professional and personal life, so it's equally important you know that the company that you choose to work at, and its leaders, will support and guide you. With global locations, technologies and products, 3M is a place where you can collaborate with other curious, creative 3Mers. This position provides an opportunity to transition from other private, public, government or military experience to a 3M career. Supporting Your Well-being 3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. Chat with Max For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting assistant on 3M.com/careers. All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M. Learn more about 3M's creative solutions to the world's problems at ********** or on Instagram, Facebook, and LinkedIn @3M. Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties. Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement. Pay & Benefits Overview: 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly. 3M Global Terms of Use and Privacy Statement Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here , select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms.

The Impact You'll Make in this Role The 3M Valley plant is located just ten miles west of Omaha, NE. As a Temporary Manufacturing Associate, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact by: Following operating procedures and customer specifications to produce quality products which are delivered to customers on time Working effectively within a production work team and collaborating with other teams Contributing to continuous improvement and problem solving Operating assigned equipment in a safe, effective, and efficient manner, including maintaining a neat and orderly work area Operating processes according to procedures Inspecting and packaging product according to standards Using computers as needed to run process operation Monitoring other operations and works cooperatively with others Your Skills and Expertise To set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications: Possess a High School Diploma/GED or higher (completed prior to start) Applicants meeting the basic qualifications above may be required to take and pass 3M elected testing as a part of the selection process Pay Competitive Salary: The starting rate of pay for this position is $18.25/hour. This targeted starting salary represents a good faith estimate and can vary based on factors including, but not limited to, job-related knowledge, skills, and experience. Other benefits and incentives may apply; pay and benefits overview: This information is being disclosed in accordance with local Pay Transparency Rules. Work location: Valley, NE Travel: No travel Relocation Assistance: Not authorized Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status). Responsibilities of this position may include direct and/or indirect physical or logical access to information, systems, technologies subjected to the regulations/compliance with U.S. Export Control Laws. U.S. Export Control laws and U.S. Government Department of Defense contracts and sub-contracts impose certain restrictions on companies and their ability to share export-controlled and other technology and services with certain "non-U.S. persons" (persons who are not U.S. citizens or nationals, lawful permanent residents of the U.S., refugees, "Temporary Residents" (granted Amnesty or Special Agricultural Worker provisions), or persons granted asylum (but excluding persons in nonimmigrant status such as H-1B, L-1, F-1, etc.) or non-U.S. citizens. To comply with these laws, and in conjunction with the review of candidates for those positions within 3M that may present access to export controlled technical data, 3M must assess employees' U.S. person status, as well as citizenship(s). The questions asked in this application are intended to assess this and will be used for evaluation purposes only. Failure to provide the necessary information in this regard will result in our inability to consider you further for this particular position. The decision whether or not to file or pursue an export license application is at 3M Company's sole election. Collaborate with Innovative 3Mers Around the World Choosing where to start and grow your career has a major impact on your professional and personal life, so it's equally important you know that the company that you choose to work at, and its leaders, will support and guide you. With global locations, technologies and products, 3M is a place where you can collaborate with other curious, creative 3Mers. This position provides an opportunity to transition from other private, public, government or military experience to a 3M career. Supporting Your Well-being 3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. Chat with Max For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting assistant on 3M.com/careers. All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M. Learn more about 3M's creative solutions to the world's problems at ********** or on Instagram, Facebook, and LinkedIn @3M. Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties. Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement. Pay & Benefits Overview: 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly. 3M Global Terms of Use and Privacy Statement Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here , select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms.

Eaton's IS AER FMC division is currently seeking a Assembler II- 1st Shift. The hourly rate for this position is $22.50 per hour. The hours for this shift are 5:30 am - 2:00 pm. is also eligible for a variable incentive program. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: The Fuel and Motion Control Systems Division of Eaton's Aerospace Group, has an opening for an Assembler II based in Irvine, CA. * Assemble parts or units, and position, align, and fasten units to assemblies, subassemblies, or frames using hand tools and power tools * May disassemble and assemble product that is returned for repair * Utilize hand tools such as pliers, wrenches, screwdrivers, arbor press, vises, soldering iron, micrometers, calipers and indicators * Use routing sheets, operating instruction sheets or other documentation to ensure proper assembly of parts. Perform visual inspection of units during the assembly process and at completion of assembled units. * May perform verification as an operator/inspector for others in the department * Inspect, test, and adjust completed units to ensure that units meet specifications, tolerances, and customer order requirements * Determine tooling and special gauging required to complete work * Comply with all safety requirements, including proper use of personal protective equipment and operation of equipment in a safe and competent manner. Understand and meet all departmental safety objectives and goals. Keep assigned work-area clean, organized, and orderly per 5S standards. * Perform other related duties as assigned Qualifications: Required (Basic) Qualifications: * High School Diploma or GED from an accredited institution * Minimum of 2 year previous work experience in mechanical assembly * This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All accepted applications must be U.S. Persons as defined by ITAR (U.S. citizen, U.S. Permanent Resident, Political Asylee, or Refugee). * No relocation provided. Candidates must reside within 50 miles of Irvine, CA in order to be considered. Active Duty Military Service member candidates are exempt from the geographical area limitation. Preferred Qualifications: * Previous work experience in the Aerospace industry Position Criteria: * Communicate effectively and work well in a team environment * Ability to work from written instructions such as blueprints or other work instructions * Ability to solder, experience working in manufacturing * Ability to interact and participate in a team driven culture * Team player and able to multi-task * Assembly using required handheld and power tools #IND123 We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's IS AER FMC division is currently seeking a Sub-Assembly. The hours for this role are 3:30pm-12:00am. The hourly rate for this position is $19.47 + $1.00 shift differential per hour. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. **What you'll do:** **KEY ACCOUNTABILITIES:** + Responsible for minor assembly processes, such as rotor/shaft assembly, pressure plates assembly, and shaft seal assembly, as required by work orders and/or lean line operations. + Responsible for the creation, production, and attachment of all production and R.E.O. nameplates in accordance with the requirements designated on the case history and/or the Sales Order Addendum. The production of nameplates shall be accomplished using all of the designated processes and equipment located in the area. + Responsible for lock wiring all units in accordance with all specifications defined by the customer, by prints, and by case histories. The individual shall also be responsible for physically re-checking and validating all fastener torque requirements as required. + Responsible for visually inspecting and completing final unit pre-shipment operations such as installation of drive shafts, o-rings, caps, plugs, placement of lock wire "tamper seals", etc. + Responsible for masking off and painting parts and units while following blueprints and special paint processes according to customer requirements and specifications. + Completes all required quality and customer information on reports and documents. + Responsible for self-inspection and verification of same on all required assembly and test documentation. + Responsible for maintaining cleanliness and order in all assigned working areas to the highest degree of cleanliness required for ensuring the highest quality standards in the assembly of all products. + Responsible for safety for self and for other employees in the area. + Ability to read and complete inspection ledger, inspection check sheet, operation sheet, + move ticket and discrepancy report (DR) and other paperwork as necessary to comply with Quality Systems. + Responsible for notifying supervisors when work received does not meet the specifications required by previous operators including paperwork requirements as observable. + Performs operator defined 5S/TPM tasks as required. + Responsible for returning all tools to their proper location at the end of the shift and cleaning work area. + Proper use of all tools and gages necessary to complete and to verify that all work performed has been completed to specifications as required. + Subassembly operations such as, installation of pins, plugs, inserts, bearings, miscellaneous components, etc. + Performs minor sanding, lapping, deburr or repair work as required in the course of + performing the primary duties of the classification. + Compliance to Manufacturing Self-Release Process (MSRP) and responsible for the quality of the product going to next operation. + Other duties as required or assigned within the job classification. **Qualifications:** **POSITION CRITERIA:** + Team player attitude demonstrated in boss and peer relationships in a diverse + environment + Strong work ethic demonstrated through action orientation and a drive to achieve results + Great mechanical aptitude along with excellent problem solving skills + Good writing skills and ability to comprehend detailed written instructions + High degree of manual dexterity for complex assembly + Ability to read blueprints and applicable specifications + Basic knowledge of component parts + Basic computer skills required including the ability to access and save files **PREFERRED QUALIFICATIONS:** + Prior work experience with hydraulic systems in an aviation or military setting + Ability to read and follow quality procedures + Prior work experience following documented process plans and procedures **BASIC QUALIFICATIONS:** + High school diploma or GED required + Two (2) years general manufacturing or military experience required + This position requires use of information or access to hardware which is subject to the + International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent + Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee + No relocation benefits are being offered for this position. Only candidates residing within + 100 miles of Eaton's Jackson, MS facility will be considered for this position \#LI-SB2 We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's IS AER ITD division is currently seeking a Assembler II-2nd Shift. The hourly rate for this position is $18.50 per hour. The hours for this shift are 7:00 am - 3:30 pm. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: PRIMARY FUNCTION: Assembler role will assemble, fit, fasten, and install parts to form subassemblies. Align, fit, assemble, fasten, connect, and install system components of military mechanical/electromechanical equipment. ESSENTIAL FUNCTIONS: * Setup equipment to meet product standards for identification, shell painting, retainer loading, contact painting, wire cutting, riveting, contact crimping and contact hooding. * Weigh, mix and identify items such as inks, paints, adhesives, molding compounds, and potting materials. * Follow intermediate drawings and procedures. * Perform work with limited to no supervision. * Support cross training and support of other departments. * Manually load and/or machine load retainers into molded plastic inserts per work order instructions. * Bond loaded front inserts to molded plastic rear inserts per work order instructions. * Bond interface seals and grommet seals to plastic insert assemblies per work order instructions. * Rework and/or repair assembled parts and products according to engineering specification changes. * Read and interpret blueprints, illustrations, and specifications to determine layouts, sequences of operations, and follows procedures. * Position and align subassemblies in jigs or fixtures, using measuring instruments and following blueprint lines and index points. * Assemble and bond EMI rings to connector shell per work order instructions. * Assemble and bond EMI rings to connector shell per work order instructions. * Apply identification stamping to various components and assemblies. * Paint components, as well as apply paint stripe markings to contacts. * Work in a safe manner and perform housekeeping duties to maintain safe work environment. Assure proper maintenance of a safe and clean work area. * Stage materials for shipment as required. * Prepare single and shielded wires for termination, crimp contacts to prepared wires, terminate simple cables to connectors, and load and operate heat treat and annealing ovens. * Soldering contacts and application of solvents and epoxies. * Other duties as assigned. Qualifications: BASIC QUALIFICATIONS: * High School diploma or GED from an accredited institution * Minimum of 1-3 years with Manufacturing Environment experience * Must be able to work in the United States without corporate sponsorship now and within the future. * This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. PREFERRED QUALIFICATIONS: * Detailed knowledge of Aerospace product, manufacturing processes and inspection techniques. * Experience in aerospace products and applications. * Excellent communication and presentation skills - both verbal and written * Ability to read, follow and understand verbal instruction, product/ process specifications, drawings, and work orders in English. * 2-3 years' experience in related mechanical manufacturing assembly operations * Ability to use calculators. * Ability to lift 30 lbs. and handle components and assemblies using bending, reaching, and twisting body movements; in addition to use of hand tools. * Ability to recognize and inform supervision of assembly problems and equipment breakdown. * Good manual dexterity to assemble small and intricate parts. * Soldering experience Additional Information: * Strong ethics, values and the ability to influence others' decision-making. * Must exhibit a high level of motivation, sense of urgency, and energetic approach to job duties and requirements. We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's IS AER ITD division is currently seeking a Assembler II-2nd Shift. The hourly rate for this position is $18.50 per hour. The hours for this shift are 7:00 am - 3:30 pm. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. **What you'll do:** **PRIMARY FUNCTION:** Assembler role will assemble, fit, fasten, and install parts to form subassemblies. Align, fit, assemble, fasten, connect, and install system components of military mechanical/electromechanical equipment. **ESSENTIAL FUNCTIONS:** - Setup equipment to meet product standards for identification, shell painting, retainer loading, contact painting, wire cutting, riveting, contact crimping and contact hooding. - Weigh, mix and identify items such as inks, paints, adhesives, molding compounds, and potting materials. - Follow intermediate drawings and procedures. - Perform work with limited to no supervision. - Support cross training and support of other departments. - Manually load and/or machine load retainers into molded plastic inserts per work order instructions. - Bond loaded front inserts to molded plastic rear inserts per work order instructions. - Bond interface seals and grommet seals to plastic insert assemblies per work order instructions. - Rework and/or repair assembled parts and products according to engineering specification changes. - Read and interpret blueprints, illustrations, and specifications to determine layouts, sequences of operations, and follows procedures. - Position and align subassemblies in jigs or fixtures, using measuring instruments and following blueprint lines and index points. - Assemble and bond EMI rings to connector shell per work order instructions. - Assemble and bond EMI rings to connector shell per work order instructions. - Apply identification stamping to various components and assemblies. - Paint components, as well as apply paint stripe markings to contacts. - Work in a safe manner and perform housekeeping duties to maintain safe work environment. Assure proper maintenance of a safe and clean work area. - Stage materials for shipment as required. - Prepare single and shielded wires for termination, crimp contacts to prepared wires, terminate simple cables to connectors, and load and operate heat treat and annealing ovens. - Soldering contacts and application of solvents and epoxies. - Other duties as assigned. **Qualifications:** **BASIC QUALIFICATIONS:** - High School diploma or GED from an accredited institution - Minimum of 1-3 years with Manufacturing Environment experience - Must be able to work in the United States without corporate sponsorship now and within the future. - This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. **PREFERRED QUALIFICATIONS:** - Detailed knowledge of Aerospace product, manufacturing processes and inspection techniques. - Experience in aerospace products and applications. - Excellent communication and presentation skills - both verbal and written - Ability to read, follow and understand verbal instruction, product/ process specifications, drawings, and work orders in English. - 2-3 years' experience in related mechanical manufacturing assembly operations - Ability to use calculators. - Ability to lift 30 lbs. and handle components and assemblies using bending, reaching, and twisting body movements; in addition to use of hand tools. - Ability to recognize and inform supervision of assembly problems and equipment breakdown. - Good manual dexterity to assemble small and intricate parts. - Soldering experience **Additional Information:** - Strong ethics, values and the ability to influence others' decision-making. - Must exhibit a high level of motivation, sense of urgency, and energetic approach to job duties and requirements. We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here (********************************************* for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's IS AER ITD division is currently seeking a Assembler II. The hourly rate for this position is $20.00 per hour. The hours for this shift are 7:00 am - 3:30 pm. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: PRIMARY FUNCTION: Assembler role will assemble, fit, fasten, and install parts to form subassemblies. Align, fit, assemble, fasten, connect, and install system components of military mechanical/electromechanical equipment. ESSENTIAL FUNCTIONS: * Setup equipment to meet product standards for identification, shell painting, retainer loading, contact painting, wire cutting, riveting, contact crimping and contact hooding. * Weigh, mix and identify items such as inks, paints, adhesives, molding compounds, and potting materials. * Follow intermediate drawings and procedures. * Perform work with limited to no supervision. * Support cross training and support of other departments. * Manually load and/or machine load retainers into molded plastic inserts per work order instructions. * Bond loaded front inserts to molded plastic rear inserts per work order instructions. * Bond interface seals and grommet seals to plastic insert assemblies per work order instructions. * Rework and/or repair assembled parts and products according to engineering specification changes. * Read and interpret blueprints, illustrations, and specifications to determine layouts, sequences of operations, and follows procedures. * Position and align subassemblies in jigs or fixtures, using measuring instruments and following blueprint lines and index points. * Assemble and bond EMI rings to connector shell per work order instructions. * Assemble and bond EMI rings to connector shell per work order instructions. * Apply identification stamping to various components and assemblies. * Paint components, as well as apply paint stripe markings to contacts. * Work in a safe manner and perform housekeeping duties to maintain safe work environment. Assure proper maintenance of a safe and clean work area. * Stage materials for shipment as required. * Prepare single and shielded wires for termination, crimp contacts to prepared wires, terminate simple cables to connectors, and load and operate heat treat and annealing ovens. * Soldering contacts and application of solvents and epoxies. * Other duties as assigned. Qualifications: BASIC QUALIFICATIONS: * High School diploma or GED from an accredited institution * Minimum of 1-3 years with Manufacturing Environment experience * Must be able to work in the United States without corporate sponsorship now and within the future. * This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. PREFERRED QUALIFICATIONS: * Detailed knowledge of Aerospace product, manufacturing processes and inspection techniques. * Experience in aerospace products and applications. * Excellent communication and presentation skills - both verbal and written * Ability to read, follow and understand verbal instruction, product/ process specifications, drawings, and work orders in English. * 2-3 years' experience in related mechanical manufacturing assembly operations * Ability to use calculators. * Ability to lift 30 lbs. and handle components and assemblies using bending, reaching, and twisting body movements; in addition to use of hand tools. * Ability to recognize and inform supervision of assembly problems and equipment breakdown. * Good manual dexterity to assemble small and intricate parts. * Soldering experience Additional Information: * Strong ethics, values and the ability to influence others' decision-making. * Must exhibit a high level of motivation, sense of urgency, and energetic approach to job duties and requirements. We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's IS AER ITD division is currently seeking a Assembler II. The hourly rate for this position is $20.00 per hour. The hours for this shift are 7:00 am - 3:30 pm. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. **What you'll do:** **PRIMARY FUNCTION:** Assembler role will assemble, fit, fasten, and install parts to form subassemblies. Align, fit, assemble, fasten, connect, and install system components of military mechanical/electromechanical equipment. **ESSENTIAL FUNCTIONS:** - Setup equipment to meet product standards for identification, shell painting, retainer loading, contact painting, wire cutting, riveting, contact crimping and contact hooding. - Weigh, mix and identify items such as inks, paints, adhesives, molding compounds, and potting materials. - Follow intermediate drawings and procedures. - Perform work with limited to no supervision. - Support cross training and support of other departments. - Manually load and/or machine load retainers into molded plastic inserts per work order instructions. - Bond loaded front inserts to molded plastic rear inserts per work order instructions. - Bond interface seals and grommet seals to plastic insert assemblies per work order instructions. - Rework and/or repair assembled parts and products according to engineering specification changes. - Read and interpret blueprints, illustrations, and specifications to determine layouts, sequences of operations, and follows procedures. - Position and align subassemblies in jigs or fixtures, using measuring instruments and following blueprint lines and index points. - Assemble and bond EMI rings to connector shell per work order instructions. - Assemble and bond EMI rings to connector shell per work order instructions. - Apply identification stamping to various components and assemblies. - Paint components, as well as apply paint stripe markings to contacts. - Work in a safe manner and perform housekeeping duties to maintain safe work environment. Assure proper maintenance of a safe and clean work area. - Stage materials for shipment as required. - Prepare single and shielded wires for termination, crimp contacts to prepared wires, terminate simple cables to connectors, and load and operate heat treat and annealing ovens. - Soldering contacts and application of solvents and epoxies. - Other duties as assigned. **Qualifications:** **BASIC QUALIFICATIONS:** - High School diploma or GED from an accredited institution - Minimum of 1-3 years with Manufacturing Environment experience - Must be able to work in the United States without corporate sponsorship now and within the future. - This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. **PREFERRED QUALIFICATIONS:** - Detailed knowledge of Aerospace product, manufacturing processes and inspection techniques. - Experience in aerospace products and applications. - Excellent communication and presentation skills - both verbal and written - Ability to read, follow and understand verbal instruction, product/ process specifications, drawings, and work orders in English. - 2-3 years' experience in related mechanical manufacturing assembly operations - Ability to use calculators. - Ability to lift 30 lbs. and handle components and assemblies using bending, reaching, and twisting body movements; in addition to use of hand tools. - Ability to recognize and inform supervision of assembly problems and equipment breakdown. - Good manual dexterity to assemble small and intricate parts. - Soldering experience **Additional Information:** - Strong ethics, values and the ability to influence others' decision-making. - Must exhibit a high level of motivation, sense of urgency, and energetic approach to job duties and requirements. We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here (********************************************* for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's IS AER FMC division is currently seeking a Assembler A (2nd Shift). The hourly rate for this position is $23.92 - $35.88. Generally starting at $25.00 an hour. per hour. The hours for second shift are as follows; 1:45 pm - 10:15 pm. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: PRIMARY FUNCTION: Assemble routine mechanical assemblies, subassemblies, and top assemblies of mild to most complex product line that includes but is not limited to commercial parts for customer such as Boeing, Embraer, Gulfstream, Cessna, and Airbus. May occasional work on electrical assemblies and solder. Reports to the Production Supervisor/Manager in Skydrol. ESSENTIAL FUNCTIONS: * Assembly of mechanical assemblies, subassemblies, and top assemblies. Ensure activities are performed correctly and proper tooling and documentation is used. Requires little to no supervision. * Perform lock wire/safety wire and nameplate. * Proactively identifies best practices. * Must have the ability to utilize hand tools such as, but not limited to, pliers, wrenches, screwdrivers, arbor press, vises, soldering iron, depth micrometers, calipers, lockwire pliers and dial indicators. * Proficiently interpret blueprints, verbal, and/or written instructions. * Perform cross training when required. * Material preparation including lapping of surfaces with proper tooling techniques and compounds. * Perform visual inspection, identify any defective items and handle according to established procedures. * Adhere to operational procedures and ensure tooling is in calibration before use. * Maintain clean and safe work area. Adhere to all safety rules and regulations * Other duties as assigned. May be temporarily reassigned to cover workload in other areas of production as necessary. * Overtime is required to meet business needs, and you may be required to work overtime as requested. Qualifications: Basic Qualifications: * High School diploma, GED or equivalent from an accredited institution is required. * Minimum of two (2) years in assembly within a manufacturing, aerospace, or military environment. * No relocation benefit is offered for this position. Only candidates residing within 50 miles of Los Angeles, CA facility will be considered for this position. * Legally authorized to work in the United States without company sponsorship now or in the future. * This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. * Eaton will consider for employment, qualified applicants with criminal histories in a manner consistent with the requirements of the FCIHO. Preferred Qualifications: * Minimum of 2 years prior assembly experience in Aerospace industry. * Electrostatic Discharge (ESD) certification. * Experience working in FAA environment. Skills: Position Criteria * Ability to push, pull and lift up to 50 lbs. * Ability to read and write English. * Ability to work from written and verbal instructions. * Understanding of blueprints. * Computer proficiency. * Attention to detail * Willing to perform repetitive tasks while sitting or standing for extended periods of time Physical Requirements: * Sitting, standing, walking, squatting * Pulling frequently, reaching frequently * Lifting/Carrying: Knees, Waist * Lifting requirements: Ability to lift up to 50lbs (group lifts over 35lbs) Additional Information: We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's IS AER FMC division is currently seeking a Assembler B - 2nd Shift (Repair and Overhaul). The hourly rate for this position is $20.80 - $31.20. Generally starting at $23.00 an hour per hour. The hours for this shift are 1:45 pm - 10:15 pm. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. **What you'll do:** **PRIMARY FUNCTION:** Assemble and teardown of routine mechanical assemblies, subassemblies and final assemblies of simple to moderate complexity product line that includes commercial and military customers. Reports to the Production Supervisor/Manager in CSO. Will also obtain direction from department lead. **ESSENTIAL FUNCTIONS:** Perform lock wire/safety wire, nameplate, assembly of mechanical assemblies and subassemblies. Ensure activities are performed correctly and proper tooling and documentation is used. Material preparation including lapping of surfaces with proper tooling techniques and compounds. Interpret blueprints, verbal, and/or written instructions Work with others to complete assemblies Perform visual inspection and identify any defective items and handle according to established procedures Perform cross training when required. Must have the ability to utilize hand tools such as, but not limited to, pliers, wrenches, screwdrivers, arbor press, vises, depth micrometers, calipers, lockwire pliers and dial indicators. Adhere to operational procedures and ensure tooling is in calibration before use. Maintain clean and safe work area. Adhere to all safety rules and regulations. May retrieve items from stockroom. Other duties as assigned. May be temporarily reassigned to cover workload in other areas of production as necessary. **Qualifications:** **Basic Qualifications:** - High School diploma, GED or equivalent from an accredited institution is required. - Minimum of 1 year manufacturing experience - No relocation benefit is offered for this position. Only candidates residing within 50 miles of Los Angeles, CA facility will be considered for this position. - Legally authorized to work in the United States without company sponsorship now or in the future. - This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. - Eaton will consider for employment, qualified applicants with criminal histories in a manner consistent with the requirements of the FCIHO. **Preferred Qualifications:** - Prior assembly experience in aerospace industry Physical Requirements: - Sitting, standing, walking, stooping - Pulling frequently, reaching frequently - Lifting/Carrying: Knees, Waist - Lifting requirements: Ability to lift up to 50 pounds (group lifts over 35lbs) **Position Criteria:** - Ability to push, pull and lift up to 50 lbs. - Ability to work from written and verbal instructions - Understanding of blueprints - Computer proficiency - Attention to detail - Self-motivated to learn - Mechanical aptitude - Willing to perform repetitive tasks while sitting or standing for extended periods of time **ADDITIONAL INFORMATION:** Must be prequalified to work on defense projects, per the state department ITAR regulations. - Makes Decisions/Solves Problems - Identifies and raises issues and problems in a constructive manner. - Drive for Results - Continuously raises performance standards and strives for superior performance. - Job Knowledge - Learns and masters the required job skills in their current position. - Commitment - Committed to ensuring that Eaton remains successful and competitive through personal commitment to their job. Is flexible, adaptable and demonstrates a willingness to change. Has good attendance record from both an absenteeism and punctuality perspective. - Communication/Teamwork - Effectively communicates and works to build relationships with people within and/or outside own department. Works effectively in a diverse environment, respecting different ideas, perspectives, and values of others on teams, as well as within own department and in general day-to-day interactions. Behaves in accordance with the beliefs and commitments expressed in the Eaton Philosophy. We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's IS AER FMC division is currently seeking a Assembler A. The hourly rate for this position is $25.88 per hour. The hours for this shift are 5:30 am - 2:00 pm. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: PRIMARY FUNCTION: Assemble and teardown of routine mechanical assemblies, subassemblies, and top assemblies of simple to complex product line that includes commercial and military customers. Reports to the Production Supervisor/Manager in CSO. Will also receive direction from department lead. ESSENTIAL FUNCTIONS: * Assembly and teardown of mechanical assemblies, subassemblies, and top assemblies. Ensure activities are performed correctly and proper tooling and documentation is used. Requires little to no supervision. * Perform lock wire/safety wire and nameplate * Proactively identifies best practices. * Must have the ability to utilize hand tools such as, but not limited to, pliers, wrenches, screwdrivers, arbor press, vises, soldering iron, depth micrometers, calipers, lockwire pliers and dial indicators. * Proficiently interpret blueprints, verbal, and/or written instructions * Perform cross training when required. * Material preparation including lapping of surfaces with proper tooling techniques and compounds. * Perform visual inspection and identify any defective items and handle according to established procedures. * Adhere to operational procedures and ensure tooling is in calibration before use. * Work with others to complete assemblies * May retrieve items from stockroom * Perform soldering as required * Maintain clean and safe work area. Adhere to all safety rules and regulations * Other duties as assigned. May be temporarily reassigned to cover workload in other areas of production as necessary. Qualifications: Basic Qualifications: * High School diploma, GED or equivalent from an accredited institution is required. * Two (2) years in assembly within a manufacturing, aerospace, or military environment. * No relocation benefit is offered for this position. Only candidates residing within 50 miles of Los Angeles, CA facility will be considered for this position. * Legally authorized to work in the United States without company sponsorship now or in the future. * This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. * Eaton will consider for employment, qualified applicants with criminal histories in a manner consistent with the requirements of the FCIHO. Preferred Qualifications: * 2 years prior assembly experience in Aerospace industry * Electrostatic Discharge (ESD) certification. * Soldering experience * A&P License * Experience working in an FAA environment Physical Requirements: * Sitting, standing, walking, squatting * Pulling frequently, reaching frequently * Lifting/Carrying: Knees, Waist * Lifting requirements: Ability to lift up to 50lbs (group lifts over 35lbs) Skills: Additional Information: Progression Criteria to Assembler and Tester B* (Lateral Move) * Be an Assembler A for at least 18-24 months * Have at least six (6) months experience in assembly of simple to complex assemblies * Experience troubleshooting assemblies * Ability to test at least three (3) simple and two (2) moderate assemblies * Subject Matter Expert (SME) in assembly of at least three (3) moderate assemblies and four (4) simple assemblies * Achieve Performing (P) or better in APEX * Achieve three (3) or better on all APEX competencies * Cross-train Assemblers A&B in simple to moderate assemblies * No performance concerns (including, but not limited to behavioral, tardiness, attendance) * Meet or exceed productivity goals * Meet or exceed quality rejection goals We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's IS AER FMC division is currently seeking a Assembler A. The hourly rate for this position is $25.88 per hour. The hours for this shift are 5:30 am - 2:00 pm. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. **What you'll do:** **PRIMARY FUNCTION:** Assemble and teardown of routine mechanical assemblies, subassemblies, and top assemblies of simple to complex product line that includes commercial and military customers. Reports to the Production Supervisor/Manager in CSO. Will also receive direction from department lead. **ESSENTIAL FUNCTIONS:** + Assembly and teardown of mechanical assemblies, subassemblies, and top assemblies. Ensure activities are performed correctly and proper tooling and documentation is used. Requires little to no supervision. + Perform lock wire/safety wire and nameplate + Proactively identifies best practices. + Must have the ability to utilize hand tools such as, but not limited to, pliers, wrenches, screwdrivers, arbor press, vises, soldering iron, depth micrometers, calipers, lockwire pliers and dial indicators. + Proficiently interpret blueprints, verbal, and/or written instructions + Perform cross training when required. + Material preparation including lapping of surfaces with proper tooling techniques and compounds. + Perform visual inspection and identify any defective items and handle according to established procedures. + Adhere to operational procedures and ensure tooling is in calibration before use. + Work with others to complete assemblies + May retrieve items from stockroom + Perform soldering as required + Maintain clean and safe work area. Adhere to all safety rules and regulations + Other duties as assigned. May be temporarily reassigned to cover workload in other areas of production as necessary. **Qualifications:** **Basic Qualifications:** - High School diploma, GED or equivalent from an accredited institution is required. - Two (2) years in assembly within a manufacturing, aerospace, or military environment. - No relocation benefit is offered for this position. Only candidates residing within 50 miles of Los Angeles, CA facility will be considered for this position. - Legally authorized to work in the United States without company sponsorship now or in the future. - This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. - Eaton will consider for employment, qualified applicants with criminal histories in a manner consistent with the requirements of the FCIHO. **Preferred Qualifications:** - 2 years prior assembly experience in Aerospace industry - Electrostatic Discharge (ESD) certification. - Soldering experience - A&P License - Experience working in an FAA environment **Physical Requirements:** - Sitting, standing, walking, squatting - Pulling frequently, reaching frequently - Lifting/Carrying: Knees, Waist - Lifting requirements: Ability to lift up to 50lbs (group lifts over 35lbs) **Skills:** **Additional Information:** **Progression Criteria to Assembler and Tester B* (Lateral Move)** - Be an Assembler A for at least 18-24 months - Have at least six (6) months experience in assembly of simple to complex assemblies - Experience troubleshooting assemblies - Ability to test at least three (3) simple and two (2) moderate assemblies - Subject Matter Expert (SME) in assembly of at least three (3) moderate assemblies and four (4) simple assemblies - Achieve Performing (P) or better in APEX - Achieve three (3) or better on all APEX competencies - Cross-train Assemblers A&B in simple to moderate assemblies - No performance concerns (including, but not limited to behavioral, tardiness, attendance) - Meet or exceed productivity goals - Meet or exceed quality rejection goals We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here (********************************************* for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's ES AMER ARS division is currently seeking a Entry Level Assembler (2nd). The hourly rate for this position is $19.80 + $1.00 Shift Differential per hour. This position is also eligible for a variable incentive program. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. HOURS: 3:30PM - Midnight **Why work at Eaton? Below are a few of the outstanding benefits we offer:** + Health benefits offered on first day of your employment! + Vacation available after 60 days of employment + 13 Paid holidays + Weekly pay + Career progression opportunities to cross-train in different departments and increase compensation. + Overtime opportunities + Retirement benefits + Educational Assistance Program, Wellness Reimbursement, and more! **What you'll do:** + Set up, assembly, and repairing when necessary + Perform quality and SPC checks where necessary to produce good quality devices + Share in handling all materials used in the cell and the movement of finished devices to designated areas + Adhere to and support all facility environmental guidelines and procedures to identify additional pollution prevention projects to reduce waste and raw material consumption. **Position Criteria:** + Must stand up to 8 hours a day + Requires hand speed and mental agility + Strong Work Ethic + Attention to detail (accuracy) + Consistent overtime + Proficient using hand/power tools **Qualifications:** **Basic Qualifications:** + Must have a high school diploma/GED from and accredited association + No relocation benefit is offered for this position. Only candidates residing within the immediate Lincoln, IL area **(70 miles)** will be considered for this position. Active-Duty Military Service member candidates are exempt from the geographical area limitation. + Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc. **Preferred Qualifications:** + Previous manufacturing or assembly experience **Skills:** We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Responsible for assembling industrial equipment. Job Description: Must have knowledge of assembling screw pipe or socket weld pipe Utilizes working knowledge of different types of components May assist with bending tubing ¼” to 1” carbon or stainless steel Understands basic blueprints Must be able to hang bottles, install welded pipe, install fuel filter, mount oil cooler, make supports and braces, air test systems, set scrubbers, install pumps Follow all HSE guidelines Required Test: None Preferred Education and Experience: High school diploma or equivalent or equivalent preferred and/or training Minimum two (2) years industrial experience Physical Strain: Bending, squatting, climbing, pulling, stooping, twisting, reaching, working at elevated heights Lifting up to 50 pounds maximum with frequent lifting and/or carrying objects weighing up to 30 pounds Must be able to work outside in extreme temperatures or in a shop environment

TempToFT Assembler Rate: $16/hr Hours: 6am-2:30pm (some overtime until 4:30pm) Wilmington, OH C-D Responsibilities: - Assembly of various products and components to finished goods. - Perform any required setup activity. - Position and align components for assembly. - Assemble fabricated/purchased parts into subassemblies and complete products according to a bill of materials. - Operate air tools and basic hand tools to assist in assembly operations. Additional tool operation may be required as necessary. - Maintain safe and clean working environment by complying with procedures, rules, and regulations. - Perform essential job duties as directed by supervisor. - Other duties may be assigned as necessary. Requirements: - High school diploma or general education degree (GED) is preferred and/or training; or equivalent combination of education and experience. - Must be willing and able to meet quality and production standards set by department. - Must be willing and available to work overtime and Saturdays as scheduled. - Must be willing and available to learn new processes as necessary. - Must be willing and able to work in a team centered work environment. - Comprehend simple instructions, either written or verbal. - Effectively communicate and perform required documentation. - Perform addition, subtraction, multiplication, and division using whole numbers, common fractions, and decimals. - Read basic tape measure and basic blueprints. - Apply common sense understanding to carry out detailed but uninvolved written or oral work instructions. - Deal with problems involving a few concrete variables in various manufacturing situations. If you possess the skills we are looking for and ready to make a positive impact, apply NOW! We look forward to connecting soon!

Job DescriptionDescription: We are HALO! We build brand engagement for our over 60,000 clients globally and lead our $25B industry through the dedication of over 2,000 team members across the United States. Join a team dedicated to getting customer orders ready for shipment all over the world. We offer a different kind of distribution center experience! This is an on-site Assembly position in our Sterling, IL fulfillment center, responsible for packaging packets and boxes based on information received from warehouse sheets while ensuring the accuracy of packaging lists and items included in shipment. This opening is for 1st shift, working Monday through Friday from 6:30am to 3:00pm CT under the supervision of the Team Lead and Production Supervisor. Duties and Responsibilities Interprets information on warehouse sheet for production of packets/magic boxes Surveys materials prior to assembly (kitting) to ensure all supplies meet minimum approved inspection standards Use excel spreadsheet to keep track of the kitting projects and update when as needed Request additional materials when damages or shortages are identified Works within group setting to distribute assembly responsibilities to ensure timely completion of projects Interfaces with Team Lead to ensure inaccuracies and inequities are addressed and resolved Responsible for proper maintenance of work area Ensures accuracy of packing list and items included in shipment Notifies Team Lead and/or Supervisor upon project completion Perform other duties as needed and directed by the Team Lead and Supervisor Requirements: High School Diploma or GED required Basic Microsoft Excel experience required Prior warehouse and shipping experience preferred Ability to pay close attention to detail and to ensure accuracy of reports and data Have good judgement and be proactive under challenging circumstances Must be able to lift up to 50lbs unassisted Work well in a collaborative team environment Compensation: The pay rate for this role is $15.00 per hour. Please note that this pay serves as a general guideline and reflects a broad spectrum of labor markets across the US. While it is uncommon for candidates to be hired at or near the top of the range, compensation decisions are influenced by various factors. At HALO, these include, but are not limited to, the scope and responsibilities of the role, the candidate's work experience, location, education and training, key skills, internal equity, external market data, and broader market and business considerations. Benefits: At HALO, we offer benefits that support all aspects of your life, helping you find a work-life balance that's right for you. Our comprehensive benefits include nationwide coverage for Medical, Dental, Vision, Life, and Disability insurance, along with additional Voluntary Benefits. Prepare for your financial future with our 401(k) Retirement Savings Plan, Health Savings Accounts (HSA), and Flexible Spending Accounts (FSA). More about HALO At HALO, we unleash the energy of our client's brands and amplify their stories to capture the attention of those who matter most. For that reason, more than 60,000 small- and mid-sized businesses work with HALO and have made us the global leader of the branded merchandise industry. Career Advancement: At HALO, we love promoting from within. Internal promotions have been the key to our exponential growth in the last few years. With so many industry leaders at HALO, you'll have the opportunity to accelerate your career by learning from their experience, insights, and skills and gain access to HALO's influential global network, leadership experiences, and diverse thinking. Culture: We love working here and know that you will too. You can expect a positive culture of ingenuity, inclusion, and relentless determination. We push the limits of possibilities and imagination by staying curious, humble, and provocative in order to break through yesterday's limit. Diversity is the source of our creativity and we thrive when each of us contributes to an inclusive culture of respect, dignity, and equity mindset in everything we do. We keep our promise for excellence with an unrelenting commitment to achieving results and supporting one another to stay accountable, transparent, and dependable. Recognition: You're going to succeed here, and you can count on us to celebrate your wins. Colleagues across the company will join in recognizing your big milestones and nominate you for awards. Over time, you'll earn so much recognition that you can convert into gift cards, trips, concerts, and merchandise at your favorite brands. HALO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We insist on an environment of mutual respect where equal employment opportunities are available to all applicants without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. Inclusion is a core value at HALO and we seek to recruit, develop and retain the most talented people. HALO participates in E-Verify. Please see the following notices in English and Spanish for important information: E-Verify Participation and Right to Work. HALO is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need reasonable accommodation because of a disability for any part of the employment process - including the online application and/or overall selection process - you may email us at ***********. Please do not use this as an alternative method for general inquiries or status on applications as you will not receive a response. Reasonable requests will be reviewed and responded to on a case-by-case basis.

Assembler We offer: * Competitive pay starting of $23.63/hour and $24.63/hour, plus $1.50 shift differential for 2nd and 3rd shift openings. * Medical, vision, dental, and life insurance starting on your first day. * 401k with generous company match * Up to three weeks paid vacation in your first year. * Twelve (12) company holidays * Employee assistance program and medical support * Opportunities for advancement The Impact You'll Make in this Role As an Assembler, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative people around the world. Here, you will make an impact by: * Work efficiently, effectively, and collaborate in a team setting while following operating procedures and/or customer specifications to produce quality products which are delivered to the customer on time * Work at various machines or stations assembling product, operating machinery, picking & packing finished goods, and/or inspecting products; dependent upon openings * Use hand and power tools and may be required to operate powered industrial vehicles * Use computers as needed to run process operations, input data, update inventory, etc. * Demonstrate safe work behaviors to avoid injury to self or others and contribute to continuous improvement and problem solving Your Skills and Expertise To set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications: * Possess a High School Diploma/GED or higher (completed and verified prior to start) * Ability to work overtime, weekends and holidays as needed. * Ability to work a fixed first, second, or third shift of 8 to 10 hours; depending on availability * Red Wing, MN 55066 - Reliably commute or planning to relocate before starting work (required) Applicants meeting the basic qualifications above may be required to take and pass 3M elected testing as a part of the selection process Additional qualifications that could help you succeed even further in this role include: * Minimum of one (1) year of manufacturing experience in a fast-paced environment * Basic computer knowledge * Effective communication skills along with the ability to read, speak and understand both oral and written instructions * Problem solving and troubleshooting skills * Ability to collaborate and work within a team setting Pay Competitive pay starting at $24.34/hour and $25.37/hour, plus $1.50 shift differential for 2nd and 3rd shift openings. This targeted starting salary represents a good faith estimate and can vary based on factors including, but not limited to, job-related knowledge, skills, and experience. Other benefits and incentives may apply; pay and benefits overview:*************************************************************** This information is being disclosed in accordance with local Pay Transparency Rules. Work location: * Red Wing, MN Travel: Does not include travel Relocation Assistance: Is not Authorized Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status). Supporting Your Well-being 3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. Chat with Max For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting assistant on 3M.com/careers. #INDPROD All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M. Learn more about 3M's creative solutions to the world's problems at ********** or on Instagram, Facebook, and LinkedIn @3M. Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties. Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement. Pay & Benefits Overview: https://**********/3M/en_US/careers-us/working-at-3m/benefits/ 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly. 3M Global Terms of Use and Privacy Statement Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms.

**Assembler** **We offer:** + Competitive pay starting of $23.63/hour and $24.63/hour, plus $1.50 shift differential for 2nd and 3rd shift openings. + Medical, vision, dental, and life insurance starting on your first day. + 401k with generous company match + Up to three weeks paid vacation in your first year. + Twelve (12) company holidays + Employee assistance program and medical support + Opportunities for advancement **The Impact You'll Make in this Role** As an Assembler, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative people around the world. Here, you will make an impact by: + Work efficiently, effectively, and collaborate in a team setting while following operating procedures and/or customer specifications to produce quality products which are delivered to the customer on time + Work at various machines or stations assembling product, operating machinery, picking & packing finished goods, and/or inspecting products; dependent upon openings + Use hand and power tools and may be required to operate powered industrial vehicles + Use computers as needed to run process operations, input data, update inventory, etc. + Demonstrate safe work behaviors to avoid injury to self or others and contribute to continuous improvement and problem solving **Your Skills and Expertise** To set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications: + Possess a High School Diploma/GED or higher (completed and verified prior to start) + Ability to work overtime, weekends and holidays as needed. + Ability to work a fixed first, second, or third shift of 8 to 10 hours; depending on availability + **_Red Wing, MN 55066 - Reliably commute or planning to relocate before starting work (required)_** **_Applicants meeting the basic qualifications above may be required to take and pass 3M elected testing as a part of the selection process_** Additional qualifications that could help you succeed even further in this role include: + Minimum of one (1) year of manufacturing experience in a fast-paced environment + Basic computer knowledge + Effective communication skills along with the ability to read, speak and understand both oral and written instructions + Problem solving and troubleshooting skills + Ability to collaborate and work within a team setting **Pay** Competitive pay starting at $24.34/hour and $25.37/hour, plus $1.50 shift differential for 2nd and 3rd shift openings. This targeted starting salary represents a good faith estimate and can vary based on factors including, but not limited to, job-related knowledge, skills, and experience. Other benefits and incentives may apply; pay and benefits overview:**************************************************************** This information is being disclosed in accordance with local Pay Transparency Rules. **Work location:** + Red Wing, MN **Travel:** Does not include travel **Relocation Assistance:** Is not Authorized **Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).** **Supporting Your Well-being** 3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. **Chat with Max** For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting assistant on 3M.com/careers. \#INDPROD All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M. Learn more about 3M's creative solutions to the world's problems at ********** or on Instagram, Facebook, and LinkedIn @3M. Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties. Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement. Pay & Benefits Overview: https://**********/3M/en\_US/careers-us/working-at-3m/benefits/ 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. **Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly.** **3M Global Terms of Use and Privacy Statement** Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here (************************************************************************************************* , select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms. At 3M we apply science in collaborative ways to improve lives daily as our employees connect with customers all around the world. Learn more about 3M's creative solutions to global challenges at ********** or on Twitter @3M or @3MNews. 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law.

Working with blue prints, assembly drawings, specifications, sketches, and verbal and written instructions, assembles, disassembles, repairs and adjusts a variety of units, attachments, components and/or accessories. Reports directly to Production Supervisor or his/her designate. Key Results Areas by level of work Level I: Quality - Complete and accurate work performed efficiently Production quality and efficiency using appropriate tools and equipment, qualified to perform special processes as needed * Working on assembly operations, sub assembly operations, attachments and/or accessories. * Size of positioning of work may require incumbents of this position to operate a variety of material handling equipment including jibs, overhead cranes, and their accessories. * Uses an assortment of measuring tools * Consistently meets customer's quality requirements and expectations. Follow instructions - oral and/or written * Can properly read all blueprint and work instructions * Will provide instruction and guidance to employees assigned to assist and as required, will participate in training of welders and other employees of the department of lesser classification. * Performs other duties as assigned by the Production Supervisor, weld shop, or his/her designate. Safety & housekeeping * Work may require use of scaffold, ladders, forklift, and/or scissor lift. * Work may require the use of a crane to move part. * Maintains a clean work area with no clutter. * Practices safety at all times while at work. * Follows safety policies and procedures and speaks up when others are non-compliant. * Wears all safety equipment for area of work. Continual Improvement suggestions * Keeps an open mind to others continuous improvement suggestions * Bring continuous improvement suggestions to the appropriate team member. Professional Development * Demonstrates initiative, positive attitude, and enthusiasm for the job * Will follow up with supervisor on professional development goals and opportunities * Takes an interest and lets it be known that they have a desire to grow with the company Requirements Qualifications: To qualify for this position, an individual must possess the knowledge, training, experience and abilities required. Education and Training Technical Trades School in Welding High school GED Required Experience: 1+ years of Assembly experience. Other: Must be willing to work overtime as required. Minimal travel may be required Skills: To perform the job successfully, an individual should demonstrate the following competencies: * Ability and willingness to abide by set policies and/or safety programs established by GHM, our clients, and/or regulatory agencies which govern our performance and behavior in the normal course of our work while on GHM or the client's property or job site. * Strong organization and time management skills. * High attention to detail. * Demonstrate behavior consistent with company values. * Ability to work independently, with minimal direction as a highly motivated self-starter and within a team oriented culture. * Exhibits polite and professional communication via phone, e-mail and mail. * Follows instructions, responds to management direction; takes responsibility for own actions; keeps commitments; commits to long hours of work when necessary to reach goals; completes tasks on time or notifies appropriate person with an alternate plan. * Maintain a collaborative relationship with internal and external stakeholders. * Obtains support and cooperation from others and reciprocates; demonstrates positive behaviors, displaying tact, respect, and understanding when dealing with others; proactively engages and confronts issues to achieve continual improvement. * Meets challenges with resourcefulness, generates suggestions for improving work; develops innovative approaches and ideas; presents ideas and information in a manner that gets others attention. * Demonstrates pride in workmanship and commitment to continual quality improvement; maintains clean, organized work area; maintains accurate and timely labor reporting; makes improvement based on lessons learned; maintains strict adherence to quality system requirements. * Ability to add, subtract, multiply, divide in all units of measure, using whole numbers, common fractions, and decimals. * Ability to thrive in a team environment. Physical and Mental Demands The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Physical demands: While performing the duties of this position, the incumbent is primarily required to sit, stand, walk, stoop, and bend. Required to speak and communicate clearly with others. Corrected vision to 20/20 or adequate and ability to identify and distinguish colors. * Mental demands: While performing the duties of this position, the incumbent is required to read, write, analyze data and reports, exercise judgment, develop plans, procedures and goals, present information to others and work under pressure. * Work Environment: While performing the duties of this position, the incumbent is also exposed to high level of manufacturing and equipment noise. Duties are performed indoors in a manufacturing environment with temperature changes. Exposure to hazardous materials, fumes or airborne particles and moving mechanical parts with vibration. Work Authorization Must be able to work in the U.S without sponsorship.