Inspector jobs in Camden, NJ

Job Purpose Nondestructive Testing (NDT) Level III Radiographer (RT) is tasked with the day-to-day operations of the NDT department and supervision of NDT inspectors. Provide real time x-ray service and support to the assigned projects and programs to ensure product meets customer quality requirements. Essential Duties and Responsibilities: Radiographer (RT) Level III Real Time x-ray certification Knowledge of real time x-ray equipment and imaging software, radiographer interpretations Maintain all X-Ray related Equipment / Systems Perform Real-time X-Rays on products and components per existing Procedures and Operating Instructions for internal and external customers Train, qualify and certify NDT RT inspection personnel Write NDT Procedures Develop NDT X-ray inspection techniques Support manufacturing operation level procedures, inspection techniques Support NDT investigations, perform inspections and participate in supplier audit if required Ensure compliance with customer and certification agency regulations Provide NDT RT certification and data for completed X-ray inspections Maintain safe work environment with X-ray monitor equipment, maintain x-ray report and digital logs for Florida Department of Health audits Other duties as assigned Travel 30-40% Qualifications : To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High School Diploma or equivalent; Associates Degree preferred Five (5) years of work experience as NDT RT Level II in aerospace inspections Certified ASNT NDT Level III Familiar with quality system requirements (ASME Section III, ANSI, NQA-1, AS9100, ISO9001, etc.) Ability to read, interpret, and apply engineering drawings and specifications Competent computer skills, including MS Office, specifically Word and Excel Ability to read, write, and understand English Minimum and Preferred Qualifications: Must be qualified and certified to ASNT-TC-1A in the following NDT Methods that will be utilized: Radiographic (RT) Preferred candidate will be Certified in one or more of the following NDT methods in conjunction with RT: Visual Examination (VT), Liquid Penetrant Examination (PT) Magnetic Particle Examination (MT) Ultrasonic Examination Required education: Required: High School diploma or equivalent with at least 3 years of inspection related experience. Preferred: 2 years of inspection related experience with a completion of 2 years or college in technical or engineering related discipline from a university, college, or technical school. Preferred:1 year of inspection related experience with a degree in engineering or science from a university or accredited college. Required Licenses or Certifications: Valid Driver's License Previous Level III Certification to ASNT-TC-1A including documented objective evidence of classroom and on the job training experience

Job Details PA -Montgomeryville - Montgomeryville, PA $19.00 HourlyDescription Finishing/Packaging/Inspector Responsibilities: Essential Job Functions: Set up and run finishing equipment on which competency has been documented by the Production Manager, including shrink wrapper, heat sealers, auto baggers, tipper, serializer, Longford counter and similar equipment listed on the Skills Matrix Final quality inspection in accordance with AQL standards and quality escalation procedures Packing according to work order specifications and delivery of finished goods to order fulfillment department Performance of all scheduled maintenance operations as directed by the Production Manager Diligent adherence to the First Article Sign Off (FASO) and related QMS procedure Achievement of quality and productivity targets established by the Production Manager Cooperation with all team members in the efficient execution of manufacturing processes Maintain a clean and organized workspace in accordance with 5S principles Maintain a safe and injury free work environment Perform related duties as assigned by supervisor Maintain compliance with all company policies and procedures Qualifications Key Competencies: High energy, enthusiastic, success oriented, goal driven approach Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. Ability to lift and carry up to 50 pounds Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards Preferred Requirements: Documented finishing/inspection experience in a fast-paced manufacturing environment or demonstrated aptitude for machine operation and maintenance Excellent verbal and written communication skills, including ability to effectively communicate with internal and external customers Computer proficiency (MS Office - Word, Excel and Outlook) and experience with an ERP system is preferred

Job DescriptionOverview Join our team as a Quality Inspector at our facility in Linwood, PA! In this role, you'll play a crucial part in ensuring that our products meet the highest standards of quality and safety. We're looking for detail-oriented individuals who are passionate about maintaining excellence and can thrive in a collaborative environment. If you have a keen eye for detail and a commitment to quality, we'd love to hear from you! Responsibilities Conduct thorough inspections of incoming materials, in-process components, and finished products. Utilize measuring instruments and testing equipment to assess product quality. Document inspection results and maintain accurate records of findings. Identify and report defects or non-conformities and recommend corrective actions. Collaborate with production teams to resolve quality issues and improve processes. Participate in quality audits and assist in the development of quality control procedures. Stay updated on industry standards and best practices to ensure compliance. Qualifications High school diploma or equivalent; additional technical training in quality control is a plus. Proven experience as a Quality Inspector or in a similar role. Strong understanding of quality control standards and testing methodologies. Proficient in using measurement tools and equipment. Excellent attention to detail and analytical skills. Ability to work independently and as part of a team. Strong communication skills, both written and verbal. You should be proficient in: Quality Inspection Experience Tape Measure Reading Blueprint Reading Machines & technologies you'll use: Measurement Gauges Calipers and Micrometers

Job DescriptionJob Summary: Quality Inspector:Precision Machine Shop is seeking a dedicated and detail-oriented Quality Inspector to join our team. The Quality Inspector will be responsible for ensuring that our products meet the highest quality standards, from incoming raw materials, In-process assemblies, to finished goods. They will play a vital role in maintaining our reputation as a trusted manufacturer of precision metal products. Responsibilities: Quality Inspector: Conduct inspections on incoming raw materials, parts, sub-assemblies, and finished goods to ensure compliance with quality specifications and standards. Follow established inspection checklists, testing procedures, and documentation protocols. Perform visual inspections, measurements, and functional tests utilizing various tools. Identify and document non-conformities, defects, and discrepancies, and work closely with the production team to address and resolve issues promptly. Adhere to relevant quality standards, regulations, and industry best practices. Participate in internal quality audits and assist in the implementation of corrective and preventive actions. Provide timely and accurate inspection reports and documentation. Collaborate with cross-functional teams to drive continuous improvement initiatives related to quality control and assurance. Stay updated on industry trends, advancements, and regulatory changes related to quality assurance. Maintain a clean and organized work area, ensuring that all testing equipment is properly calibrated and maintained. Requirements: Quality Inspector High school diploma or equivalent; additional technical certifications or qualifications in quality assurance are preferred. Proven experience as a Quality Inspector, preferably in the metal fabrication or manufacturing industry Strong knowledge of quality control principles, methods, and techniques Proficient in using measurement tools and equipment such as calipers, micrometers, gauges, and CMM (Coordinate Measuring Machine) Excellent attention to detail with an ability to identify and document quality issues effectively. Familiar with reading and interpreting engineering drawings, specifications, and technical documentation Good communication skills, both written and verbal Ability to work independently and collaboratively within a team environment. Familiarity with ISO 9001 or other quality management systems is a plus. Knowledge of Lean Six Sigma methodologies is an added advantage. Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws.

RK&K is hiring a Building Construction Inspector to monitor active construction sites and perform complex and routine inspections of construction to ensure structures and facilities have been built in compliance with building codes and ordinances. Location will be Cecil County Maryland. Essential Functions Inspect facilities during various stages of construction and remodeling to ensure compliance with applicable codes, ordinances and regulations Examine plans and specifications of new construction, additions and alterations to facilities to determine compliance with the provisions of applicable city, state, and federal construction codes, ordinances, rules, and regulations Inspect existing buildings and premises for change of use, occupancy, or compliance with applicable codes and ordinances Inspect foundation, concrete, steel, masonry, wood construction, framing, plumbing, heating and electrical installations and a large variety of other complex and routine building system elements Directly responsible for reporting on-site activities and daily progress Responsible to be able to witness, understand, and verify all required on-site testing is being performed in accordance with applicable standards Maintain project records, files and reports regarding inspections and follow-on activities Required Skills and Experience High School diploma or equivalent Experience inspecting for compliance with local Building and Plumbing codes as well as the National Electric Code and UL compliance Experience inspecting HVAC installation including balance and alignment testing Experience with inspection of pumping units, including controls Experience with both installation and testing of fire alarm systems and fire suppression systems Experience interacting with local code inspectors, permitting agencies and the fire marshal. Must be able to operate basic Microsoft Office Applications, Laptop and iPad Excellent communication skills Ability to read and interpret construction drawings and specifications Ability to pass Criminal History Background Check (CHBC) Valid driver's license and favorable driving record Other Duties This job description indicates the general nature and levels of work, knowledge, skills, abilities, and other essential functions (as covered under ADA). It is not designed to cover or contain a comprehensive listing of all activities and duties required by the employee. Other duties are assigned as required . What We Offer RK&K offers excellent potential for career advancement and professional growth. We also offer attractive compensation packages commensurate with experience and a comprehensive benefits package including: Paid time off Tuition reimbursement Health, dental, vision, life, and disability insurances Matching 401(k) plan Paid Holidays Much, much more! Why RK&K? As a full-service engineering and construction management firm, RK&K gives you the opportunity to directly impact the communities in which we live and work. What sets RK&K apart is an award-winning culture that has fostered a spirit of collaboration and trust for over 100 years. To its clients, the firm delivers concepts, processes, and outcomes that are designed for success. RK&K has earned its reputation as a trusted partner, responsive employer, and community steward. Design your career at RK&K, Apply Today! Pay Rate: $30 - $38 per hour

C & L Inspection was built on a mission to be the most trusted US Services Company delivering top-notch performance with uncompromising integrity. This way of thinking has set us above the competition. We are looking for knowledgeable, safety minded people to join our team as we grow. Job Title: Craft InspectorLocation: Middletown, PA (Surrounding Areas) Duration: 03/010/2024-12/31/2024Job Description:· The Craft Inspector performs the quality control (QC) function over the contractor's work as a part of the Company's quality assurance program and is responsible for the completion of all activities in his area of assignment in accordance with the appropriate Company specifications and the approved for construction drawings.Duties may include, but are not limited to:· Right-of-Way Clearing and Grading' Ditching, Stringing, and Bending' Lowering, Padding, and Backfilling' Road Boring' Tie-ins' Clean-up' inspection.· The inspector works under the direction of the Chief Inspector may be assigned additional responsibilities as required· The inspector provides quality assurance through inspection of work and materials for conformance to requirements.· The inspector is to complete required documentation (i.e. reports and log books) in a timely, concise, and accurate manner.· Familiarization with the approved construction drawings and the appropriate Company specifications in order to assure the work is performed in accordance with those requirements.· Familiarization with Contract documents (Agreement) as it relates to his or her duties on the project· Familiarization with applicable industry and regulatory codes' Familiarization with the Pre-Job Notes · Familiarization with the sequence of the work and plan inspection of upcoming activities· Report safety issues to the Chief Inspector and Safety Inspector· Drawing markups for as-built records· Hydrostatic tests and any test failures· Quantity, size, wall thickness, grade, heat number, other pipe nomenclature and pipe coating, and its location· Understanding the basics of pipe alignment, welding, and its inspection (specialized inspectors are required for the actual inspection)· Condition of ditch bottom Rocks, roots, clay, and other debris· Lifting and lowering in equipment· Understanding, monitoring, assessing, and reporting on painting and coating activities and items including but not limited to:· Vendor Product data sheet utilization· Proper application of paint and/or coating· Proper setup and use of holiday detector / jeep Requirements:· API 1169· OSHA 10 or OSHA 30 C & L Inspection offers a full slate of Inspection, Construction Management and Engineering personnel to the Petroleum, Natural Gas and Telecom Industries. We surpass others in the industry by providing the newest technology, training and support that is unequaled. Working together with our inspectors and clients, our team strives to set a new bar for the Pipeline & Utilities Inspection industry. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

America's 1st online casino is hiring! At Evolution, our talent is live, the players are virtual. Every day, thousands play with real money, from their mobile devices, on one of our 50+ games. Since 2006, Evolution has been the leading product company of virtual casino games. We've evolved the gaming industry by designing and hosting the most streamed, interactive casino tables and slots in the world. Our North American talent broadcasts 24/7 from our studios in Atlantic City, New Jersey, Southfield, Michigan, Philadelphia, Pennsylvania, Fairfield, Connecticut and Vancouver, Canada. Job Description * To work within your own team to produce the required results and to meet company targets respecting deadlines. * Inspect a set number of boxes per day, with precision and accuracy * Spot errors and defects in cards and follow the proper procedure for replacing or removing. Inform the manager about any type of incident. * Set up card boxes for card change procedures * Strong record-keeping Qualifications * Must be able to work a flexible schedule including weekends and holidays. * Must be 18 years of age or older. * Required to successfully complete pre-employment drug background checks. * Service-minded with excellent communications skills and a positive attitude * The ability to work as part of a team and be adaptable to changing business needs * 1+ years of work experience in a service-oriented role * Responsible, dedicated, and dependable Additional Information This position is an excellent opportunity to join the fast-growing team, we also offer: * $16/hr entry level with opportunity growth * 10 days of Paid Time Off Annually * 5 Sick Days * Paid Break Time * 401K Match * Technique Training & Career Growth Opportunities * Centrally located modern studio environment with break room & refreshments Evolution is a market-leading developer and provider of products and services for online casino entertainment. Our excellence is driven by over 16,000 EVOlutioneers across 30 markets worldwide, working in product innovation, software development, IT solutions, game hosting and business support. Evolution's dynamic and creative environment creates a unique opportunity for personal and professional growth. Our integrated business-to-business solutions guarantee that our clients can always provide an unrivalled online entertainment experience to their players globally. We thrive on remaining an award-winning digital powerhouse of entertainment products and services with an ever-expanding line-up of product brands: Evolution Live, NetEnt, Red Tiger, Ezugi, Big Time Gaming, Nolimit City and DigiWheel. Evolution is a Swedish company founded in 2006 and listed on Nasdaq Nordic (EVO). Evolution USA was established in 2018. More information on Evolution.com. For more information visit ***************** All your information will be kept confidential according to EEO guidelines.

America's 1st online casino is hiring! At Evolution, our talent is live, the players are virtual. Every day, thousands play with real money, from their mobile devices, on one of our 50+ games. Since 2006, Evolution has been the leading product company of virtual casino games. We've evolved the gaming industry by designing and hosting the most streamed, interactive casino tables and slots in the world. Our North American talent broadcasts 24/7 from our studios in Atlantic City, New Jersey, Southfield, Michigan, Philadelphia, Pennsylvania, Fairfield, Connecticut and Vancouver, Canada. Job Description To work within your own team to produce the required results and to meet company targets respecting deadlines. Inspect a set number of boxes per day, with precision and accuracy Spot errors and defects in cards and follow the proper procedure for replacing or removing. Inform the manager about any type of incident. Set up card boxes for card change procedures Strong record-keeping Qualifications Must be able to work a flexible schedule including weekends and holidays. Must be 18 years of age or older. Required to successfully complete pre-employment drug background checks. Service-minded with excellent communications skills and a positive attitude The ability to work as part of a team and be adaptable to changing business needs 1+ years of work experience in a service-oriented role Responsible, dedicated, and dependable Additional Information This position is an excellent opportunity to join the fast-growing team, we also offer: $16/hr entry level with opportunity growth 10 days of Paid Time Off Annually 5 Sick Days Paid Break Time 401K Match Technique Training & Career Growth Opportunities Centrally located modern studio environment with break room & refreshments Evolution is a market-leading developer and provider of products and services for online casino entertainment. Our excellence is driven by over 16,000 EVOlutioneers across 30 markets worldwide, working in product innovation, software development, IT solutions, game hosting and business support. Evolution's dynamic and creative environment creates a unique opportunity for personal and professional growth. Our integrated business-to-business solutions guarantee that our clients can always provide an unrivalled online entertainment experience to their players globally. We thrive on remaining an award-winning digital powerhouse of entertainment products and services with an ever-expanding line-up of product brands: Evolution Live, NetEnt, Red Tiger, Ezugi, Big Time Gaming, Nolimit City and DigiWheel. Evolution is a Swedish company founded in 2006 and listed on Nasdaq Nordic (EVO). Evolution USA was established in 2018. More information on Evolution.com. For more information visit ***************** All your information will be kept confidential according to EEO guidelines.

Industrial Inspection & Analysis is searching for an ANSI Inspector located in Pennsylvania to join our Lifting Services team. The ANSI Inspector will perform inspections on aerial lifts, bucket trucks, cranes and digger derricks. ANSI inspections ensure the heavy equipment is in safe working order by conducting a review of the major components. Responsibilities Perform structural tests including Acoustic emission tests to assess the integrity of the fiberglass and steel structure Magnetic particle inspections to identify surface cracks on ferrous metals Torque test all critical fasteners, among others. Dielectric testing to verify the electrical insulating strength in the FRP upper and lower booms, bucket, liners, FRP extensions on digger derricks, tool circuits, and upper control system. Qualifications Mechanically inclined. Basic knowledge of mechanical processes, movement, and assembly. Basic knowledge of hand tools. Proficient computer skills. Strong communication skills. Adequate visual acuity and perception to identify and distinguish light, color, depth, distance, and other elements pertaining to spatial resolution. Must be able to work independently with some direction from management. Problem solver, detail oriented. Job Requirements Able to stand, sit, squat, climb, crawl and twist for extended periods of time. Ability to lift up to 50 pounds. Must be punctual, accountable, and provide high quality customer service. Must be able to travel for an extended period of time and available to work varying shifts which may include weekends, overnights and holidays. Must have valid driver's license and be able to pass a background check and drug screen. We offer medical, dental, and vision benefits, a 401K plan, and paid time off and holidays.

**Country:** United States of America ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance:** None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? **This is a 3rd shift opportunity: Monday to Friday (10pm-6am)** **What You Will Do:** + Visually inspects product and segregates nonconforming material and perform Solumina required job audits for Op Cert surveillance + May require occasional weekend work to support production schedule. + Perform OpCert over-inspects, as required. + Detailed inspection cert is required at the conclusion of training. + Adhere to all EH & S guidelines, including wearing of required personal protective equipment + Basic understanding of print tolerances including ability to interpret some GD&T, working knowledge of Op Cert functions and proficiency using precision measuring equipment + Meet vision requirements of NAS410 or internal equivalent **Qualifications You Must Have:** + HS Diploma or GED + U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Qualifications We Prefer:** + 1 year manufacturing inspection experience **What We Offer:** + Medical, dental, vision and life insurance + Short-term disability, long-term disability and parental leave + 401(k) match + Flexible spending accounts + Employee assistance program + Employee Scholar Program (No waiting period!) + Paid time off including: 3 weeks of vacation with the option to purchase an additional week, 5 personal sick days, and 12 paid government holidays throughout the year **Learn More and Apply Now!** What is my role type? In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is Onsite. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility. \#pwhourly **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

The NDT Advanced Services CWI Inspector is responsible for performing visual inspections on welded products and structures to ensure that work produced by welders meets specifications in NDT services. Essential Job Functions * Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern * Performs all duties as assigned and adheres to TEAM's Core Values. * Performs internal and external inspections to determine if welded products and structures meet the acceptance criteria of a specific code, standard or document. * Properly interprets regulations, codes, and industry standards. * Ensures work is implement as required by project specifications. * Compiles and submits completed inspection reports in a timely manner. * Completes the Inspection, Test Plan and status report. * Reviews surveillance documents for any issues. * Schedules and conducts Pre-Inspection Meetings. * Communicates regularly with customers on scheduling activities as detailed by the customer. * Plans travel and surveillance activities/ visits to effectively utilize time and minimize expenses. * Maintains the Inspection Folder. Job Qualifications * High school diploma or equivalent preferred * Previous industry related inspection experience preferred. * SCWI, CWI or CAWI certification required. * Must be able to pass a Vision Test. * Travel Requirements: 0% - 50% Work Conditions * Position is based out of a branch or site location. * Field duties require indoor and outdoor work in a plant atmosphere * Interaction with other crew employees, as well as supervisors and client personnel * Working in plant and/or shop areas around production machinery with extreme noise levels * Must be able to wear safety equipment as required by the safety department for personal protection * May be at more than one job site in a day and must be able to tolerate climate changes * May be required to travel out of town on a periodic basis Physical and Mental Requirements * Ability to lift and carry 75 pounds * Must be able to walk and climb except when performing non-field duties * Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively * Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to investigations * Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties * Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations * Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells * Ability to maintain focus and multitask effectively * Excellent communication skills * This job description is intended to indicate the kinds of tasks and levels of work difficulty required of the position given this title and shall not be construed as declaring what the specific duties and responsibilities of any particular position shall be. It is not intended to limit or in any way modify the right of management to assign, direct and control the work of employees under supervision. The listing of duties and responsibilities shall not be held to exclude other duties not mentioned that are of similar kind or level of difficulty. TEAM Industrial Services, Inc. strictly prohibits discrimination against applicants, employees, or any other covered persons because of race, color, religion, creed, national origin or ancestry, ethnicity, sex, gender, age, physical or mental disability, citizenship, past, current or prospective service in the uniformed services, genetic information, or any other characteristic protected under applicable federal, state or local laws. TEAM's Core Values Safety First / Quality Always - In everything we do Integrity - Uncompromising standards of integrity and ethical conduct Service Leadership - Leading Service Quality, professionalism and responsiveness Innovation - Supports continuous growth and improvement Pride and Respect - For our customers, for each other and for all our stakeholders Teamwork - Global teamwork and collaboration

Job Description At Amuneal, each product we create is influenced by exploration, research, investment, and a never-ending focus on the highest quality materials, cutting-edge technologies, and skilled craftsmanship. With nearly 60 years of experience, Amuneal operates two divisions in Philadelphia, each with a focus on the highest quality products, fed by a strategy focused on diversification. Amuneal's Technical Products Division is the country's largest and most respected supplier of magnetic shielding, while our award-winning Custom Fabrication Division creates original designs for high-end residential and commercial interiors. Amuneal Manufacturing is seeking a dedicated Quality Control Inspector to join our fast-paced, dedicated, and extremely talented team. Candidates should bring in a high level of excitement and punctuality. They will be responsible for performing set-up and production operations on projects of a wide variety, while maintaining standards for safety & quality. This role will operate on a 4 day, 10 hour work week of 6:00AM-4:30PM Monday-Thursday Responsibilities: Inspect - Conduct routine and non-routine inspection of materials at incoming, in-process, and final. First Article Inspection when required by the customer or quality management. Inspect - Perform tests, interpret test results, compare them to established specifications and control limits, and make recommendations on appropriateness of data/material for release. Calibration - Maintain inspection equipment in accordance with Amuneal's internal procedures and any relevant customer specifications. Document - Ensure drawings, work instructions, and procedures are maintained to current revision and accessible. Audit - Perform routine internal audits of processes and persons, as directed by relevant management. Train - Provide training and guidance to junior members of the Quality team. This includes the provision of oversight, and implementation of disciplines when it is necessary, as well as reporting on progress, or lack thereof, to relevant management. Straighten: Arrange items that are needed so that they are ready & easy to use. Clearly identify locations for all items so that anyone can find them & return them once the task is completed. Shine: Clean the workplace & equipment on a regular basis to maintain standards & identify defects. Standardize: Revisit the first three of the 5S on a frequent basis to maintain standards & identify defects. Sustain: Keep the rules to maintain the standard and continue to improve every day. Qualifications: High School Diploma/ GED required. Associates Degree, Bachelors Degree, or Technical school preferred. Knowledge of ISO 9001 Ability to read and understand blueprints Technically apt, with experience using Microsoft Suites. Use of CMM/ FARO Arm Preferred. Our work is custom in nature and highly evolving. As part of a team, you will work on a diverse set of challenging projects. Applicants should have experience and be able to thrive both in a collaborative setting and on solo tasks. This role offers a competitive salary in addition to inclusion in the company's profit sharing, 401K, medical, and dental programs. Benefits: 401(k) 401(k) matching Dental insurance Flexible schedule Health insurance Life insurance Paid time off Referral program Vision insurance Schedule: 4 Day Work Week Weekends as needed Ability to commute/relocate: Philadelphia, PA 19124: Reliably commute or planning to relocate before starting work (Required)

Bring precision, curiosity, and craftsmanship to a team that builds components trusted by the U.S. Navy. At Interstate Connecting Components (ICC), a division of Heilind Mil-Aero, we take pride in engineering excellence. As a Quality Control Inspector, you'll play a key role in ensuring that every part we ship meets the highest standards of performance and safety. If you have experience inspecting, measuring, or testing mechanical, electrical, or assembled products - or even a background in pharmaceutical or chemical manufacturing where precision is everything - this could be the perfect next step in your quality career. What You'll Do Perform inspection and testing of incoming materials and finished products using precision tools (calipers, micrometers, thread gauges, drop gauges, etc.). Interpret engineering drawings and verify that products meet specifications before they reach our customers. Serve as the liaison between Quality and Warehouse teams, ensuring materials flow seamlessly from receipt to shipment. Conduct and coordinate Customer Source Inspections when required. Support investigations of nonconforming materials and contribute to process improvements. Accurately document inspections and results in our ERP system (Inventory, Order Entry, Purchasing, and Production modules). Assist with continuous improvement projects, developing better inspection methods and tools. Why You'll Love Working Here Purpose-driven work: Your inspections directly impact mission-critical equipment used in military and aerospace applications. Skill development: Get hands-on exposure to diverse products and inspection techniques in a growing organization. Comprehensive benefits package including medical, dental, and vision coverage; 401(k) with company match; PTO and holidays; tuition reimbursement; wellness and pet insurance programs; and referral bonuses.

Precision. Purpose. Performance. At TrekConnect, a subsidiary of Heilind Mil-Aero, we build high-reliability cable and harness assemblies used in aerospace, defense, and other mission-critical applications. As a Quality Control Inspector, you'll play a key role ensuring every product leaving our facility meets the highest technical and reliability standards. This role is ideal for a detail-oriented individual with experience inspecting electrical or mechanical assemblies, using precision tools, and working to IPC/WHMA and AS9100 standards. You'll join a collaborative team that values craftsmanship, learning, and excellence. What You'll Do * Perform incoming, in-process, and final inspections on cables, wire harnesses, and electronic assemblies. * Verify components and assemblies meet specifications, drawings, and manufacturing instructions. * Use precision tools such as calipers, micrometers, force gauges, and torque wrenches for measurement and verification. * Conduct visual inspections using magnification tools and lighting to ensure defect-free workmanship. * Prepare AS9102-compliant First Article Inspection Reports (FAIR) and maintain accurate inspection records. * Collaborate with Production and Engineering to identify, document, and resolve nonconformances. * Support electrical testing of assemblies to verify continuity, insulation resistance, and proper termination. * Maintain high levels of organization, accuracy, and adherence to ISO 9001 and AS9100 standards. Why Join TrekConnect * Be part of a skilled technical team producing high-reliability components for defense and aerospace industries. * Work in a clean, organized, and precision-focused environment where your craftsmanship makes an impact. * Opportunities for career advancement and certification training in quality and manufacturing. * Comprehensive benefits, including: Medical, dental, and vision coverage, 401(k) with company match, PTO and paid holidays, tuition reimbursement, wellness and pet insurance programs, employee discounts and referral bonuses. What You Bring * 2+ years of experience inspecting electrical, cable, or wire harness assemblies in a manufacturing environment. * Ability to read and interpret engineering drawings, schematics, bills of materials, and work instructions. * Proficiency with inspection tools (calipers, micrometers, rulers, torque wrenches, etc.). * WHMA/IPC-A-620 certification (or willingness to obtain). * Experience with ESD, J-STD-001, or fiber optic assemblies is a plus. * Working knowledge of ISO 9001 / AS9100 quality systems. * Strong attention to detail, documentation accuracy, and problem-solving skills. * Adherence to all Safety and PPE Requirements * Must be a U.S. Citizen due to Naval contractual agreements. Physical Requirements While performing the duties of this job the employee is often required to sit, stand, walk, use computers, read, write, type, use copy machines, file paperwork, use telephones, and utilize written and oral communication to interact with clients, co-workers, and customers. Exerting up to 10 pounds of force regularly, and occasionally up to 25 pounds of force to lift, carry, push, pull or otherwise move objects. Specific vision abilities required by this job include close visual acuity to perform activities such as: inspecting manufactured parts (with and without magnification), preparing/analyzing data and figures; viewing a computer terminal; extensive reading. Distance vision, peripheral vision, depth perception, ability to adjust focus and ability to distinguish colors and color variation of physical parts and components, and in documentation such as work instructions and engineering drawings. Reasonable accommodations may be made to enable individuals to perform the essential functions of this job. Working Conditions While performing the duties of this job, the employee is occasionally exposed to work near moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate.

Manufacturing Quality Inspector BH Job ID: 3365 SF Job Req ID: 15972 Job Title: Manufacturing Quality Inspector Shift: 1st Shift Mon - Fri (7am - 330pm) About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: We are currently seeking a reliable and knowledgeable individual to join our Quality team. This role will be responsible for inspecting materials and products, providing quality support through knowledge of inspection procedures and tools, identify deviations, work with production team members to document non-conforming materials and communicate with engineering team within in a manufacturing facility. A Quality Inspector works with a team to ensure all products meet established quality standards. The ideal candidate is adaptable, a team player, a great communicator, and can meet deadlines and prioritize multiple projects. Responsibilities: * Perform inspection on in-house and vendor-supplied parts and complete in-process inspections as required. Ability to use ESDS materials when working with electronic materials (i.e. wrist straps, grounded rubber mats). Operate Positive Material Identification (PMI) Gun to check materials against blueprints or drawings. Use Keyence measurement programming and CMM operation experience * Interpret engineering drawings/specifications and geometric dimensioning and tolerancing (GD&T). Conduct process audits of assigned value streams focusing on adherence to standard work. Identify and document defects, deviations, or non-conforming items and processing defects. * Perform final product inspection/verification before shipment for customer orders. Identify and report defects or issues in the assembly process and necessary adjustments or repairs to ensure product quality. Partake in the occasional inspection of soldering workmanship and electronic assemblies Perform quality checks by established quality procedures and ISO requirements. * Collect samples of products or materials for testing and coordinate with the quality control laboratory if further analysis is required. Collaborate with team members to optimize workflow and achieve daily and monthly targets. Ensure inspection tools and equipment are properly calibrated and maintained and report issues. * Maintain accurate records of inspection results, quality control data, and non-conforming products. Generate reports and documentation as required * Inspect finished products for quality and adherence to specifications. Perform quality checks by established quality procedures and ISO requirements. Identify and report defects or issues in the assembly process and necessary adjustments or repairs to ensure product quality. Test and troubleshoot assemblies. * Participate in training programs to improve maintenance skills and product knowledge. Attend monthly EHS trainings. Follow all policies and procedures (i.e. report on time and ready to work - Start/Lunch/Breaks). Participate in continuous improvement initiatives by suggesting process enhancements and participating in root cause analysis, writing the NCM, and disposing of waste accordingly (RTV, Scrap, Rework) * Follow all safety guidelines, including wearing appropriate personal protective equipment (PPE). Test PSI limit no greater than 30,000. Report any safety hazards or incidents to supervisors promptly. Follow 5S principles (Sort, Set in order, Shine, Standardize, Sustain). Test PSI limit no greater than 30,000. Lift a maximum of 35 lbs for an individual and 70 lbs for a team lift. Maintain a clean and organized work area. Requirements: * High School Diploma or GED * 2+ years' experience in Manufacturing/Industrial Quality Inspection * 1+ years of experience in Using Precision measuring tools and blueprints Core Competencies: * Lifting: Must be able to lift up to 35 pounds occasionally with hoist to be used on objects over 40 pounds. * Standing: Standing is required in periods of up to three hours at a time. * Stooping: Would be required to lift objects off pallets * Hand Dexterity: Must be able to work with hand tools, screws and gauges, as well as operating buttons on controls. * Verbal Communication: Must be capable of clear communication between co-workers and supervisor. * Carrying: Capable of carrying 40 pounds for a distance of up to 25 feet. Preferences: * Ability to read and understand the bill of materials and work instructions, blueprints, or technical drawings * Ability to operate precision tools such as micrometers, calipers, thread gauges, comparators, and others * Demonstrated time management skills, strategic thinking, and adaptability * Proficient computer knowledge (i.e. log on credentials (SSO), JD Edwards, and Microsoft Outlook, Word and Excel) Travel & Work Arrangements/Requirements: This position will be based at our site in Ivyland, PA no travel. What we Offer: At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond.

Centinel Spine , LLC is the leading global medical device company exclusively focused on addressing cervical and lumbar spinal disease with prodisc , the most complete total disc replacement (TDR) technology platform in the world. The Company's prodisc technology is the most studied and clinically proven TDR system across the globe, validated by over 540 published papers and more than 300,000 implantations. Centinel Spine's prodisc is the only TDR technology with multiple motion-preserving anatomic solutions, allowing the surgeon to Match-the-Disc™ to each patient's anatomy for both cervical and lumbar total disc replacement. About the opportunity: If you are passionate about making a difference, we are looking for a Quality Control Inspector. The qualified candidate will be considered for full time employment upon successful completion of the 90-day training period. This role is responsible for performing inspection and testing of finished goods and raw materials and maintains inspection documentation. This position is on-site in West Chester, PA five (5) days a week and reports to the Quality Control Supervisor. Where you will make an impact: Responsible for performing inspection and testing including incoming inspection of finished goods and raw materials. Also responsible for maintaining inspection documentation, including scanning and filing completed records. Responsible for initiating non-conformance reports and ensuring non-conforming material is processed in accordance with the disposition. May assist with nonconformance investigations as needed. Responsible for maintaining a clear and organized QC inspection area, product is placed in bins and on racks. Assist in internal audits as requested. What you will bring: High School Diploma (or equivalent) required Associate's degree or technical certification preferred Proficient in navigating computer systems 1-3 years' experience in a regulated environment performing quality control inspections Experience reading and inspecting engineering drawings Strong written and oral communication skills Excellent attention to detail, communication and relationship building skills Collaborate well in a team environment and convey a positive attitude Where you will go: 100% West Chester office-based Work hours for training - Monday to Friday 8:00am - 4:30pm Work hours post training - Monday to Friday 9:00am - 5:30pm Note: The above job description describes the general nature and level of work being performed by employees assigned to this position. It is not intended to be construed as an all-inclusive list of all responsibilities, duties and skills required of all employees assigned to this position. Duties, responsibilities and activities may change at any time with or without notice. Centinel Spine is proud to be an equal opportunity employer.

The Quality Inspector's role is to utilize curtainwall knowledge alongside 2D and 3D engineering / CAD drawings to identify potential quality and installation issues in curtainwall components or units. A Quality Inspector may be assigned work in different areas, depending on production requirements. All Quality Inspectors are required to abide by all applicable New Hudson Facade requirements, as outlined in the Employee Handbook. Quality Inspectors directly report to the Quality Supervisor. Role and Responsibilities: Inspect and approve curtainwall components or units at various points of the manufacturing process for compliance with curtainwall quality/cleanliness expectations. Inspect and test incoming materials (aluminum, glass, stone, machined parts, etc.) against drawings, procedures and other defined quality standards; enters inspection results in Epicor; maintains various inspection logs and spreadsheets; inspects completed curtain wall units and crating. Enters NCRs for discrepant materials as found after inspection; assists the QC Coordinator in tagging and managing rejected parts. Read and manipulate 2D / 3D engineering CAD drawings to determine if curtainwall units and its individual components are fabricated and installed correctly. Communicate with upstream quality / assembly personnel when quality issues are identified. Provide information that can support the quality of the completed curtainwall unit. Maintain inspection logs and spreadsheets, as needed. Utilize ADP / Epicor to track hours spent supporting projects. Comply with all safety standards and requirements defined by NHF. Care of all assigned tools (calipers, spectrophotometers, protractors, etc.). Other tasks as required by management. Skills and Abilities: Experience working in a heavy manufacturing or large-assembly environment. Ability to read and understand 2D engineering drawings. Familiarity with manipulating 3D engineering drawings on CAD software. Advanced knowledge and experience with measurement tools (Tape measure, caliper, protractor, etc). Ability to act with professionalism; ability to multitask. Ability to follow both written and verbal instruction. Communication skills (both written and verbal). Physical Requirements: Ability to move equipment weighing up to 50 pounds. Applicants must be able to perform repetitive lifting and other physically demanding tasks. Qualifications and Education Requirements: HS Diploma AS Degree or higher preferred. Experience in the curtainwall / construction industry preferred. New Hudson Facades is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law.

Industrial Inspection & Analysis is searching for an ANSI Inspector located in Pennsylvania to join our Lifting Services team. The ANSI Inspector will perform inspections on aerial lifts, bucket trucks, cranes and digger derricks. ANSI inspections ensure the heavy equipment is in safe working order by conducting a review of the major components. Responsibilities Perform structural tests including Acoustic emission tests to assess the integrity of the fiberglass and steel structure Magnetic particle inspections to identify surface cracks on ferrous metals Torque test all critical fasteners, among others. Dielectric testing to verify the electrical insulating strength in the FRP upper and lower booms, bucket, liners, FRP extensions on digger derricks, tool circuits, and upper control system. Qualifications Mechanically inclined. Basic knowledge of mechanical processes, movement, and assembly. Basic knowledge of hand tools. Proficient computer skills. Strong communication skills. Adequate visual acuity and perception to identify and distinguish light, color, depth, distance, and other elements pertaining to spatial resolution. Must be able to work independently with some direction from management. Problem solver, detail oriented. Job Requirements Able to stand, sit, squat, climb, crawl and twist for extended periods of time. Ability to lift up to 50 pounds. Must be punctual, accountable, and provide high quality customer service. Must be able to travel for an extended period of time and available to work varying shifts which may include weekends, overnights and holidays. Must have valid driver's license and be able to pass a background check and drug screen. We offer medical, dental, and vision benefits, a 401K plan, and paid time off and holidays.

The NDT Advanced Services API Inspector is responsible for performing inspections in accordance with API standards designated equipment for purposes of recommending and approving repairs or certifying compliance. Essential Job Functions * Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern * Performs all duties as assigned and adheres to TEAM's Core Values and Seven Critical Choices. * Performs internal and external inspections on equipment at scheduled intervals to maintain the mechanical integrity of fixed equipment. * Recommends and approves repairs as well as performs visual inspection of completed repair work. * Assists in scheduling activities related to inspection. * Writes detailed inspection and turnaround reports, and maintains documentation of inspection activities. * Identifies circumstances that necessitate the use of proper safety procedures and equipment. * Communicate and deal with customers and other parties in such a manner as to benefit the professional reputation of the company. This communication is in person at the plant / job site. * Complete all required training, including tests, within Company guidelines. * Perform necessary filing of customer and company job related forms and paperwork. Job Qualifications * High school diploma or equivalent preferred. * Technical school or other related training preferred. * Previous industry related experience preferred. * Must possess valid API certification. * Must possess valid Driver's License. * Travel requirement: 0% - 50%. Work Conditions * Position is based out of a branch or site location. * Field duties require indoor and outdoor work in a plant atmosphere. * Interaction with other crew employees, as well as supervisors and client personnel. * Working in plant and/or shop areas around production machinery with extreme noise levels. * Must be able to wear safety equipment as required by the safety department for personal protection. * May be at more than one job site in a day and must be able to tolerate climate changes. * May be required to travel out of town on a periodic basis. * Candidate must be capable of climbing, working at high elevations and working in confined spaces. Physical and Mental Requirements * Ability to lift and carry 75 pounds. * Must be able to walk and climb except when performing non-field duties. * Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively. * Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to investigations. * Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties. * Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations. * Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells. * Ability to maintain focus and multitask effectively. * Excellent communication skills. This job description is intended to indicate the kinds of tasks and levels of work difficulty required of the position given this title and shall not be construed as declaring what the specific duties and responsibilities of any particular position shall be. It is not intended to limit or in any way modify the right of management to assign, direct and control the work of employees under supervision. The listing of duties and responsibilities shall not be held to exclude other duties not mentioned that are of similar kind or level of difficulty. TEAM Industrial Services, Inc. strictly prohibits discrimination against applicants, employees, or any other covered persons because of race, color, religion, creed, national origin or ancestry, ethnicity, sex, gender, age, physical or mental disability, citizenship, past, current or prospective service in the uniformed services, genetic information, or any other characteristic protected under applicable federal, state or local laws. TEAM's Core Values Safety First / Quality Always - In everything we do Integrity - Uncompromising standards of integrity and ethical conduct Service Leadership - Leading Service Quality, professionalism and responsiveness Innovation - Supports continuous growth and improvement Pride and Respect - For our customers, for each other and for all our stakeholders Teamwork - Global teamwork and collaboration