Inspector jobs in Meriden, CT - 302 jobs

As an essential business, Anomatic produces innovative and sustainable packaging for today's biggest brands. By leveraging over five decades of manufacturing expertise and employing an extensive technologies portfolio, we design, manufacture, and finish incomparable stock and customized solutions for numerous markets. Position: Quality Control Inspector Location: Naugatuck, CT Department: Quality Shift: First Shift 6am - 2:30pm JOB SUMMARY QC Stamping Inspector's primary function is the quality evaluation through gauging and inspection to validate the acceptability of stamping production, the capture of nonconforming product and the documenting of that acceptability. Evaluation is conducted as specified through provided gauging and inspection standards. QC Stamping inspectors also provide general “Quality” training, support and guidance to Stamping Department Personnel ESSENTIAL FUNCTIONS Gather samples from each stamping press twice per shift, performs visual and dimensional inspection, recording dimensional results in Mongoose (stamping inspection system of record) as well as on the Stamping Inspection Shift Report (excel file) Conduct proper defect containment, inform the Press Operators of any defects identified, as well as Set-Up personnel, Toolmakers, Tooling Engineer and/or Stamping Dept. Manager as applicable. Record actions (i.e. scrap, hold, etc..) on the Stamping Inspection Shift Report Receive QC LAB (also receiving inspection group) anodizing report, as well as supporting defect samples and address quality issues specified in their report Conduct “outgoing” (from stamping) skid audits for product from presses identified by the Stamping Q.E. Report data as specified Provided training to Stamping Department personnel as a qualified TWI trainer (Includes but not limited to developing TWI instructional break downs, providing individual training for TWI, documenting & tracking provided training, auditing TWI tasks as indicated by management) For Start-up ensure that proper documentation and standards are at each press (gauge plan, part drawing, skid tags, skid labels, and standard boards) Perform “Start-Up” inspection using applicable gauge plan, applicable standard boards and past start-up retains. Record all results on Stamping Inspection Report Maintain “Start-Up Retains Bank” located in the Toolmaker work area. As startups are approved, one raw and one anodized sample from the Start-up will be marked with the approval date and placed in the appropriate bin to be referenced on future start ups At the beginning of each shift Stamping Q.C. Inspectors will review each press and ensure correct labels, gauge plan, part drawing and correct skid tags are being used Keep Department QC Stations and/or QC Work Areas orderly at all times. Double check to make sure proper prints, gauging and inspection plans are at each press and in the QC areas as assigned. Inspect and report inspection results for New Product Development (NPD) by completing the applicable Stamping Quality portion of the First Piece Submission Routing Form Any other duties that may be assigned, including data entry, QC checks on discrepant materials, production and quality reporting, filing and maintaining paperwork, etc. Assist with any other duties and projects as required QUALIFICATIONS Must be proficient in gauging methods and procedures. Must maintain an excellent attendance record. Must be able to work independently without constant supervision and be able to work overtime as needed to cover absences. Must be proficient in the use of Microsoft Office Applications (Outlook, Excel, Word and Power Point at a minimum). Must have basic knowledge of or be trainable on Syteline. Must be able to wear prescribed safety equipment and promote a safe work environment. #1Anomatic

JOB TITLE: Quality Control Inspector JOB CODE: Quality Control REPORTS TO: Quality Assurance Manager. Direct on-site project direction and daily scheduling provided through continuous communication with the applicable IMIA Project Manager and/or Supervisor. PAY RANGE: $32.00/hour- $42.00/hour based on experience Summary of position: Responsible for monitoring quality control/assurance requirements of all preservation preformed onboard commercial and US Navy vessel in accordance with established Navy regulations and industry standards or specific contractual requirements as defined in the Scope of Work. Collaborate with customer QA personnel on necessary aspects of the job. Essential Job Requirements: Produce/create electronic/handwritten Quality Assurance documentation as Objective Quality Evidence for work performed throughout the preservation process. Develop and Maintain Test and Inspection Plan (TIP) for all assigned jobs. Monitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Ensure all assigned equipment is maintained in good working order with within all calibration certification intervals. All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others. Required Education: High School diploma or equivalent Required Certification: NACE Inspector and/or SSPC NBPI required. Required Experience: Formal or informal on-the-job training in the marine industry; familiarity with Navy and Society for Protective Coatings standards. Required Skills: Must possess knowledge of Maritime paintings standards with particular emphasis in US Navy ship preservation criterion. Word processing, spreadsheet, email, and database computer skills required. Must be able to accomplish mathematical calculations associated with preservation readings and documentation; must be able to discern and carry out complex written, oral, or diagramed instructions. Must be able to take direction; interact professionally, knowledgeably and cooperatively with supervisors and co-workers and customer representatives. Physical Requirements: Must be physically capable of working an 8-10 hour day requires average use of computer, some physical dexterity, and agility within confined and restricted spaces & tanks. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Supervisory Responsibilities: None Working Conditions: Regularly stand for long periods of time; work on scaffolds and ladders; work on top of machinery; work in confined spaces. Regularly exposed to extreme temperatures, high noise levels, toxic or caustic chemicals, fumes, airborne particles, outdoor weather conditions, dusty conditions, wet and/or humid conditions, hazardous machinery, precarious places, close proximity to other employees. Overtime or shift work involved. Travel often required. Must follow strict safety procedures.

Introduction The mission of the New Haven Health Department is to ensure and advocate for the health and well-being of all New Haven residents. The Bureau of Environmental Health maintains as its principal goal the preservation and protection of the environmental quality of the City of New Haven. Work includes: Utilize and enforce applicable sections of the State Public Health Code, State Statutes, and Municipal Ordinances Resolve cases of childhood lead poisoning; provide educational outreach activities and assist with distribution of federal lead abatement funds to prevent lead poisoning. Investigate and resolve public health nuisances and infractions of applicable statutes and/or ordinances Assist in preparing for and responding to public health emergencies Lead is a poisonous substance found in most homes in New Haven, especially those built before 1978. In fact, over 80% of New Haven homes are likely to contain lead. When exposed to lead, children or adults can have permanent and severe health problems. PRIMARY FUNCTIONS This is a technical position under the general supervision of the Environmental Health Program Director or designee in the Department of Health to perform investigations, education, and outreach for the prevention of childhood lead poisoning. Work includes inspections for the purpose of determining the presence of lead-based paint and surface coverings and lead in soil, dust and drinking water. Work is performed within the framework of existing laws, ordinances, policies, and regulations. TYPICAL DUTIES AND RESPONSIBILITIES Inspects buildings and dwellings for possible sources of lead poisoning. Conducts investigations, following established protocols, of home environments of children exhibiting the symptoms of blood-lead poisoning. Performs inspections using special instruments to identify surfaces containing lead paint. Collects samples of paint, dust, water, and soil from dwellings and delivers samples to laboratory. Document findings accurately and take photographs or videos, as necessary. Follows procedures to ensure abatement of all areas containing lead paint which may pose a direct hazard to the health of a child. Reinspects dwellings after completion of repairs to ensure compliance with regulations. Confers with individual property owners relevant to service of notices and violations. Fosters a cooperative working relationship with other city and state agencies. Records test data and prepares reports, summaries, or charts that interpret test results. Prepares reports, analyses and recommendations concerning inspection duties and outcomes. May conduct special surveys relating to general environmental health disciplines. May assist in coordinating duties with other concerned agencies. Develops and implements lead abatement plans for properties with confirmed lead hazards, including coordinating with property owners, contractors, and other stakeholders. Assists with providing educational workshops and outreach activities to raise awareness about lead poisoning prevention and provide information on available resources for lead abatement. Performs related work as required. EDUCATION, QUALIFICATIONS & EXPERIENCE Graduation from an accredited four-year college or university with a Bachelors' degree in Public Health, Environmental Science, Occupational Health and Safety, or directly related field, and A minimum of one (1) year of hands-on experience in environmental health inspection and enforcement, Or any equivalent combination of training and experience which provides the following knowledge, abilities and skills: KNOWLEDGE, EXPERIENCE, SKILLS & ABILITIES Considerable knowledge of policies, procedures, methods, and industry standards relating to environmental health. Considerable knowledge of lead poisoning, its effects on children, and long-term health implications. Knowledge of lead hazard identification, assessment, and effective abatement strategies. Considerable knowledge of current issues, research findings, and regulatory decisions regarding childhood lead poisoning. Demonstrated ability to conduct thorough investigations of buildings and dwellings to identify hazards. Competency in utilizing specialized instruments to test for surfaces containing lead paint. Excellent record-keeping skills, including accurate documentation of inspection findings, supported by other media as needed. Ability to prepare detailed written reports, summaries, analyses, recommendations, and charts that interpret test results. Ability to assist with development and implementation of effective lead abatement plans for properties with confirmed lead hazards. Ability to coordinate abatement efforts, including liaising with property owners, contractors, and relevant stakeholders. Strong interpersonal skills for conducting educational workshops and outreach activities aimed at raising awareness about lead poisoning prevention. Ability to use standard Microsoft Office with adeptness and ease, with the ability to learn new emerging technologies. Ability to effectively communicate with co-workers, other City agencies, the public, property owners, and other stakeholders. Ability to remain current on relevant literature, training, research findings, and industry advancements in the field of environmental health. Commitment to ongoing professional development, including attendance at conferences, workshops, and training sessions to stay updated on advancements in lead inspection and abatement techniques. Proven ability to work collaboratively with other city and state agencies involved in environmental health and lead abatement efforts. Ability for self-driven initiative, coupled with strong time management and organizational skills, enabling efficient and independent execution of tasks and responsibilities. Demonstrated ability to work effectively and sensitively in a diverse community, recognizing and respecting cultural differences, and fostering an inclusive environment conducive to achieving common environmental health goals. NECESSARY SPECIAL REQUIREMENTS Must obtain State of Connecticut Lead Inspector Certification within 6 months of appointment, and maintain throughout course of employment (Certification training sponsored by the City). Must obtain State of Connecticut Lead Risk Assessor Certification within 6 months of appointment, and maintain throughout course of employment (Certification training sponsored by the City). Must possess and maintain a valid driver's license throughout the course of employment. This position is aligned with current Core Competencies for Public Health Professionals published by the Council of Linkages between Academia and Public Health Practice. Analytical/Assessment Skills · Working knowledge of assessing individual and community health needs. · Ability to collect reliable data and analyze. Policy Development/Program Planning Skills · Ability to plan, implement and evaluate health education strategies, interventions and programs. · Demonstrate the ability to evaluate the effectiveness of all prevention and promotion programs and outreach efforts. · Good knowledge of the complexity of Connecticut State / City of New Haven laws and regulations, monitor them for changes and have the ability to independently adapt to changes. Communication Skills · Good working knowledge of the appropriate use of technology in health prevention and promotion and ability to independently adapt to the fast-changing landscape of technology. Cultural Competency · Ability to learn about and work with all cultures, ethnicity, social economic statuses being respectful and non-judgmental. Community Dimensions of Practice Skills · Ability to facilitate/coordinate community stakeholder groups. · Ability to present, understand and relay all points of view on issues. Public Health Sciences Skills · Good knowledge of the principles, practices and terminology of public health and chronic disease epidemiology. · Good knowledge of disease prevention and health promotion programs. · Working knowledge of communicable diseases, diagnoses, spread containment and treatment options. Financial Planning and Management Skills · Basic understanding of budgets Leadership and systems Thinking Skills · Demonstrate leadership and management skills. · Ability to independently manage projects while providing supervisory / oversight to diverse groups of community members. SALARY, BARGAINING UNIT & TERMS OF EMPLOYMENT This is a "General Fund," tested position. This position is included in a collective bargaining agreement with Local 884, American Federation of State, County and Municipal Employees. Bargaining agreements available to review HERE. General Funded hires into this class shall not be covered by Social Security but rather the City pension, contributing 9% of salary. The City of New Haven does not sponsor employment visas. All applicants must have current authorization to work in the U.S. without employer-sponsored visa support. Employment is contingent upon the successful completion of: (1) an pre-employment background check, (2) a pre-employment physical examination, including pre-employment drug screening accordance with the City's Drug Free Workplace Policy**, and (3) a 90-day probationary period. Instructions and information on this pre-employment process are included in Conditional Offer of Employment. **Pursuant to the Federal Drug Free Workplace Act of 1988, The City of New Haven has a adopted a Drug Free Workplace Policy. The City of New Haven requires a pre-employment drug test, which includes screening for marijuana. Selection Plan Applications will be reviewed by the Department of Human Resources. Applicants must demonstrate within their submission that they meet the minimum requirements as listed within the job description; failure to do so may result in disqualification. Applicants meeting minimum requirements may be invited to participate in a Civil Service exam process at a later date. It is critical that you complete the application thoroughly, as the information you provide will be used to ascertain if you are eligible to move forward in the selection process. Your application and resume should indicate that you meet the minimum requirements as listed. This information may be used to determine the eligibility list. As such, this job announcement should be considered the exam announcement, and submissions may be evaluated prior to the posted closing date. Information regarding the employment and selection process can be found HERE. Please note that the only method of communication with applicants for this position will be by email. You must provide a valid, working email address and you will need to monitor your email, including spam/junk folders, for correspondence from the New Haven Human Resources Department. We reserve the right to extend an application deadline or close a job posting early to ensure we can attract and identify the best candidate(s) for a position. Conclusion To apply for this opportunity: Complete your User Registration. You are encouraged to save your Applicant Profile for future use. You MUST click on the job posting you are interested in, and click Apply or Apply Online from within that posting. MAKE SURE the job you are applying for is named at the top of the page as you review your application! Review or modify your application for that position Click "Ready to Send App" or the "Send" tab; read page and click the attestation Click "Send to City of New Haven" You will be redirected to "CONFIRMATION OF EMPLOYMENT APPLICATION SUBMISSION" You will also receive an email and text, if a number was provided, confirming your submission If you do not receive this confirmation in the next 24 hours, your application has not been submitted - please contact us at ********************* Please Note, your Profile is NOT an application for an open position. After you create your Applicant Profile, you must still click on a Job Title and complete the application as instructed for each position.

The Quality Inspector will be responsible for performing inspections and ensuring compliance with quality standards for machined components and assemblies. This role requires strong knowledge of machining processes, precision measurement tools, and quality procedures to maintain product integrity and customer satisfaction. Key Responsibilities * Perform in-process and final inspections on machined parts and assemblies. * Verify dimensions using precision measuring instruments (calipers, micrometers, gauges, shadow graph). * Interpret engineering drawings, blueprints, and specifications. * Document inspection results and maintain accurate records in accordance with company procedures. * Identify and report non-conformances; assist in root cause analysis and corrective actions. * Ensure compliance with ISO 9001 and internal quality standards. * Collaborate with production and engineering teams to resolve quality issues. Qualifications * High school diploma or equivalent; technical certification preferred. * Minimum 3 years of experience in quality inspection within a machining/manufacturing environment. * Strong understanding of machining processes and tolerances. * Proficient in the use of precision measuring tools and equipment. * Ability to read and interpret technical drawings and GD&T. * Familiarity with quality systems and documentation practices. * Excellent attention to detail and problem-solving skills. Physical Requirements and Work Environment Ability to stand for extended periods, lift up to 25 lbs, and work in a manufacturing environment with exposure to noise and machinery. #LI-KP1

As a member of the Birk Manufacturing Quality Control team you will be responsible for inspecting, measuring and testing individual products to Birk Manufacturing and/ or customer specifications and requirements. This includes, but is not limited to, incoming inspection of raw material, in-process verification and inspection of products and process, and overall inspection of final products using visual and mechanical test equipment. ESSENTIAL FUNCTIONS Reasonable Accommodations Statement To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Essential Functions Statement(s) Manage, control and prioritize Birk Manufacturing, Inc. inspection process. Examine incoming raw materials, customer supplied materials, and/or any other incoming goods before releasing to inventory/ production. Perform in-line inspection of semi-completed products Perform Final Inspection of Birk Manufacturing outgoing final products Operate special test instruments/equipment. Hypot/Dielectric test using a Hypot meter Resistance tests using a multi-meter Immersed water testing Dimensional tests using Steel Rulers, Micrometers, Verniers, Calipers, Radius + Pin Gauges Microscope for visual inspections When looking for air bubbles, contamination, bridging, pinholes, missing circuit trace, etc. Pull tests of raw material and finished products Freezer/ refrigerator product and/ or item testing Perform First Piece Inspections/First Article Reports (FAIR) Inspection against all dimensions and specified notes on specification sheets and/or prints/drawings pertaining to specific product. Including, but not limited to, resistance check, dielectric strength test, pull test, visual inspection and electrical inspection of installed components (fuses, thermistors, RTDs, T-stats, etc.) Ensure there is an up-to-date First Piece Article for all continuous and new production runs. Including up-to-date paperwork, proper identification of first article, proper location, etc. Ensure product is compliant to UL, CSA and RoHS requirements when applicable. Product must have correct identification that is clear and legible. Consult and confer with Engineering Department when discrepancies, possible defects, borderline judgment calls need to be made. Consult and confer with Production Manager when a repetitive defect is found to make sure defect is identified, corrected and prevented for future orders. Inspect and investigate returned products from customers. (RMA's) Giving input/suggestions to QA Manager on rework, reason for failure/defect Where applicable, write, verify and update QC Inspection Instructions for specific part numbers. Assisting co-workers, if possible, to help them produce a quality product. Make disposition on non-conforming Birk products and incoming raw material Scrap, return to production, return to supplier, pass/accept, disposition from engineering Accept/Reject First Piece inspections and return to production for go-ahead on production run OR return back to production for rework. Dispute returned products with customers and their complaints. Only if units are returned and after rigorous inspection at Birk no defects are found. POSITION QUALIFICATIONS Competency Statement(s) Accountability - Ability to accept responsibility and account for his/her actions. Accuracy - Ability to perform work accurately and thoroughly. Detail Oriented - Ability to pay attention to the minute details of a project or task. Ethical - Ability to demonstrate conducts conforming to a set of values and accepted standards. Honesty / Integrity - Ability to be truthful and be seen as credible in the workplace. Organized - Possessing the trait of being organized or following a systematic method of performing a task. Safety Awareness - Ability to identify and correct conditions that affect employee safety. Communication, Oral - Ability to communicate effectively with others using the spoken word. Reliability - The trait of being dependable and trustworthy. Responsible - Ability to be held accountable or answerable for one's conduct. Self-Motivated - Ability to be internally inspired to perform a task to the best of one's ability using his or her own drive or initiative. Must be a “team player”. SKILLS & ABILITIES · Have a working understanding of quality management systems. · Have a working understanding of the principles and tools of lean manufacturing and continuous improvement tools within a low volume, high quality manufacturing facility · Familiarity with Calibration + Tolerances · Familiarity with FMEA, Control Plans, FEMA, PDCA · Familiarity with Lean/ 6S/ Six Sigma/ Kaizen Education: · High School Graduate or General Education Degree (GED) Experience: Experience with Electrical Properties and Measurements (Resistance, Ohms, Watts, Amps, Multi-meter, Dielectrical Strength (Hypot meter), Caliper, Verniers, Temperature Measurements - Fahrenheit + Celsius) Experience with measurements; inches, millimeters, fractions, decimal points and conversion factors. Experience reading schematics, drawings and blueprints Requirements Computer Skills: Familiarity with; o Microsoft Office (Word, Excel, PowerPoint). o Data Entry Certifications & Licenses (NOT REQUIRED): Certified Internal Auditor Training Lean & Six Sigma Training

Hamilton Connections is seeking candidates for a quality control inspector operating at a manufacturing company in Danbury, CT. The quality control inspector is responsible for testing, evaluating and documenting the quality of manufactured products. The hours are 3:30 p.m.-12 a.m., Monday-Friday. The job pays $28-$32 an hour, depending on experience. Job Responsibilities: Perform first piece, final and first article inspections of products to inspect for damage and/or defects Use measuring tools like calipers, micrometers and gages to inspect products Measure products for accuracy according to blueprint specifications Maintain accurate documentation and reporting Other duties as assigned Job Requirements: 5 or more years of quality control experience, including first piece, final and first article inspections Experience with precision measuring instruments, including calipers, micrometers, height gages, plug gages and thread gages Able to read blueprints Coordinate Measuring Machines (CMM), vision system and/or optical comparator experience Geometric Dimensioning and Tolerancing (GD&T) experience Familiar with ISO procedures a plus Organized, responsible and self-driven High school diploma or equivalent Able to pass pre-employment screenings

Job Description Enjet Aero machines and fabricates complex jet engine parts, components and assemblies for leading OEMs in the commercial, defense and general aviation sectors. Our goal is to be regarded as an irreplaceable resource by our customers. The only way for a company to meet such a goal is to consistently meet production deadlines and expectations. Position Description: Quality Inspector will perform in-process and 1st article inspections, evaluate part to print specifications and understand the inspection methods used for inspection and support the manufacturing process and personnel, while adhering to the Quality Policy, AS 9100 requirements. Position reports to the Quality Manager and takes daily direction from the Inspection Supervisor. You will receive a 20% night shift premium. Essential Responsibilities: Strong blueprint and Geometric Dimensioning & Tolerance (GD&T) comprehension Able to use inspection tools, such as micrometer, indicators, comparator, etc Detailed to complete all paperwork, as required, including inspection reports Able to make mold casts to check ID dimensions Ability to identify dimensional and visual defects Able to understand and implement customer specifications and requirements Accuracy and attention to detail is highly important Experienced with completing 1st article inspections, in-process inspections and final inspections Knowledge of aerospace specifications and requirements preferred. Perform other duties as required Qualifications: Proficient at reading blueprints Knowledge of dimensional symbols Ability to identify visual defects Ability to read micrometers, calipers and comparator Knowledge of measuring equipment Ability to work together for team effort Team oriented Organized and detail oriented Adherence to document control requirements Knowledge of various inspection reports General computer knowledge Ability to work without supervision Benefits: Enjet offers a comprehensive benefits package to full-time employees including paid time off, health insurance, dental insurance, vision insurance, paid holidays, a 401K retirement plan, disability insurance, and more. As an EOE/AA employer, Enjet Aero will not discriminate in its employment practices due to an applicant's race, color, religious creed, national origin, ancestry, sex, age, veteran status, marital status or physical challenges.

Job Title: Inspector Quality Control Department: Quality Control Reports To: Chief Inspector FLSA Status: Hourly Non-Exempt Direct Work Hours: 7:00AM - 3:30PM SUMMARY Responsible for performing detailed inspections on aeroderivative Gas Turbine engines and related components using overhaul manuals, standard practice manuals and WGPW established procedures. Strong-dimensional skills are required and previous experience in the aerospace industry is a strong plus. ESSENTIAL DUTIES AND RESPONSIBILITIES The position includes but is not limited to the following essential duties and responsibilities Review job orders, customer specifications and build standards prior to inspecting parts. Perform initial, in-process and final inspection of industrial engine parts and modules using a variety of inspection tools per the inspection procedures manual, Overhaul manual (OHM) and other related documents. Determines condition of parts and/or modules, identifies requirements and initiates appropriate processes. Review parts to ensure that all required fits and clearances are taken, recorded and are within specified limits. Interact with Component Repair/Vendor Administration concerning in-process inspections, repairs and/or any problems with work instructions. Work independently, referring only unusual conditions or circumstances to engineering. Ensure that customer work instructions are carried out Maintain a safe and clean work area and adhere to all housekeeping requirements. Follow all safety procedures and rules and properly wear all safety protective equipment as required. Read and interpret complex drawings and blueprints. Conduct oneself in a businesslike manner and in the spirit of teamwork. Maintain inspection and repair documentation. Perform special projects as assigned by management. May be required to work at remote locations due to fluctuating workloads. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must possess a good working knowledge of jet engine component repair procedures required to determine proper repair actions. Aptitude for comprehending and interpreting documents encompassing safety rules, operating and maintenance instructions, and procedure manuals. Ability to interpret and apply a variety of instructions furnished in written, oral, diagram or schedule form. Ability to calculate figures such as percentages, ratios, area, circumference, and volume. Ability to apply the concepts of math as it relates to engine repairs, fits and clearances, and running positions. Capacity to solve unusual problems and deal with a variety of concrete variables in situations where only limited standardization exists. Good working knowledge of Microsoft Office applications. Excellent mechanical skills, a high level of manual dexterity including hand-eye coordination and the ability to accurately use precision measuring tools such as micrometers, calipers, and dial indicators. Must be able to read, interpret, document, and use manufacturer's technical manuals, service bulletins, illustrated parts catalogs, assembly drawings, AOS sheets and WGPW assembly records. Able to use manufacturer's special tooling and lift and turn equipment effectively and safely. EDUCATION and/or EXPERIENCE Two-year certificate or degree from college, technical school or equivalent plus additional broad specialized training in an aviation or technical school, military training or greater than ten years related experience; or equivalent combination of education and experience. PHYSICAL & ENVIRONMENTAL DEMANDS While performing the duties of this job, the employee is regularly required to stand, and use hands to finger, handle or feel objects, tools, and controls. The employee is occasionally required to walk; sit; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee must occasionally lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee may occasionally work in high places and in outside weather conditions or be exposed to moving mechanical parts, fumes, airborne particles, solvents, and oils. WGPW Industrial Turbine Services is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

COMPANY OVERVIEW: Turbine Controls MRO, a VSE Aviation Company (“TC MRO”) is a globally recognized maintenance, repair and overhaul facility with over 180 employees and more than 45 years of expertise in engine component and accessory repair services. Our locations in Bloomfield, Connecticut and Miramar, Florida service original equipment manufacturers, airlines, engine centers, asset managers and government agencies supporting components and LRU's for commercial, military, airframe and industrial applications. Our focus on customer satisfaction, process improvement, quality, delivery and competitive pricing has made TC MRO a recognized leader in the aerospace industry. SUMMARY: The Chief Quality Control Inspector verifies compliance with all pertinent Federal Aviation Regulations, and any other foreign Civil Aviation Regulations and applicable manufacturers' specifications and Air Carriers requirements. Additionally, it is the responsibility of the Chief Quality Control Inspector to ensure that product integrity and requirements are achieved by all Quality and Operations Personnel. DUTIES & RESPONSIBILITIES: Responsibilities include, but are not limited to: Responsible for assisting in inspection procedures, vendor review, technical libraries, training records, overall FAR compliance, reliability monitoring, calibration and record keeping of tools and equipment, standard practices, and procedures. Ascertain that all inspections are properly performed on all completed work and that the proper inspection records, reports and forms used by the repair station are correctly executed prior releasing the product for return to service. Assists in maintaining a current file for pertinent Federal Aviation Regulations, Specifications, Type Certification Data Sheets and Airworthiness Directives. Assure that periodic checks are made on all inspection tools and the calibration of precision test equipment used by the repair station. Determines that no defective, unserviceable or un-airworthy parts are installed in any component or articles released by the repair station. Conducting periodic facility audits to ensure compliance with internal and external quality requirements. Responsible for issuing and maintaining Corrective Actions. Knowledge to establish standards based on past customer corrective actions and requests. Responsible for assisting in the planning and laying out the details of inspection standards, methods and procedures used by the repair station in complying with all applicable FAR, manufacturer's recommendations, and customer requirements. Provides training, current and recurrent. Responsible for the workflow and inspector's actions at final inspection release of components for return to service. Communicating with Management, FAA, other NAA, internal and external customers to resolve issues discovered prior to and after release of articles. Other duties as assigned. Qualifications MINIMUM REQUIREMENTS: 9 years of relevant/technical work experience OR Bachelor's degree in lieu of 3 years work experience Documented Technician experience. Experience in communicating with FAA and other Foreign NAA. Ability to obtain Repairman's License. Proficiency with Microsoft Office Suite, including Word, Excel, Outlook and scheduling applications PREFERRED REQUIREMENTS: 9+ years of FAA 145 MRO inspection duties in like type units released by specific facility. Master's degree A&P License. Experience with ISO/ Lean practices. OTHER: The selected applicant will be subject to a background check and drug testing.

Job Title: Inspector Quality Control- 1st Article Inspector Department: MPA Warehouse Reports To: Quality Control Manager FLSA Status: Hourly Non-Exempt In- Direct Position Date: 11/17/25 Work Hours: 7:00AM - 3:30PM SUMMARY Responsible for performing detailed inspections on New GG8 spare parts and Customer owner tooling using overhaul manuals, standard practice manuals and WGPW established procedures. Strong-dimensional skills, drawing interpretation are required and previous experience in the aerospace industry is a strong plus. ESSENTIAL DUTIES AND RESPONSIBILITIES The position includes but is not limited to the following essential duties and responsibilities. Maintains a safe and clean work area and adheres to all housekeeping requirements. Follows all safety procedures and rules and properly wears all safety protective equipment as required. Able to read and understand Pratt & Whitney engine manuals, blue prints, service bulletins, illustrated parts catalogs, standard practice, and spare parts bulletins. Able to understand GD&T and drawing interpretation. Able to process quality transactions in ERP system, including non-conformities. Able to use basic shop measuring equipment including Micrometers, Vernier and Dial Calipers, Plunge and Test Indicators, Dial Bore Gages, Snap Gages, profilometer, and PI-Tapes. Working knowledge of a Window's based computer system. Works overtime as required. Conducts oneself in a business-like manner and in the spirit of teamwork. Receiving Inspection: Visual and dimensional inspection of various gas generators using MPA overhaul manuals and WGPW technical data. May be required to work at other WGPW locations or departments due to fluctuating workloads. Able to approve AS9102 First Article Inspection, including certification package and Supplier/Vendor inspection reports. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Experience with job audits, including internal ISO9001 audits. Ability to calculate figures such as ratios, area, circumference, and volume. Ability to apply the basic concepts of algebra, geometry, trigonometry, and shop math as they relate to inspection or trouble shooting. EDUCATION and/or EXPERIENCE Equivalent to high school plus additional broad specialized training in the Quality Control field or technical school, military training and one to three years related experience; or equivalent combination of education and experience. PHYSICAL & ENVIRONMENTAL DEMANDS While performing the duties of this job, the employee is regularly required to sit, stand, and use hands to handle parts. The employee must occasionally lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee may occasionally work with chemicals while receiving consumable materials in for use on parts within the shop. Possible use of alcohol and/or acetone for light cleanings of oils or dirt as parts are prepared for inspection. WGPW Industrial Turbine Services is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Working at Breeze Airways is an exciting endeavor and a serious commitment to bring “The World's Nicest Airline” to life. We work cross-functionally with truly awesome Team Members to deliver on our mission: “To make the world of travel simple, affordable, and convenient. Improving our guests travel experience using technology, ingenuity and kindness.” Breeze is hiring- join us! The Quality Control Inspector is responsible for the daily operation of the Quality Control (QC) department at his or her location Including the development, oversight, and accomplishment of daily Aircraft Inspection activities. They will report to the Manager, Quality Control and support the overall surveillance of the Aircraft Maintenance System to ensure compliance with company maintenance procedures and regulatory requirements. This position requires strong communication across all areas of Operations, including Technical Operations, Aircraft Maintenance, Quality Control, Quality Assurance and Engineering teams. Breeze is looking for great and experienced talent. Your entry pay will based on your experience ( up to $39.00 starting pay ) and our established criteria. $2.00 shift differential added when working from 9:00PM - 7:30AM Here's what you'll do Responsible for administering Breeze Airways policies in Quality Control and inspection in a line maintenance environment. Conduct surveillance and oversight of work performed at line Maintenance locations to ensure Breeze standards and those prescribed by the Code of Federal Regulations (CFR) are maintained. Perform aircraft Required Inspections (RII) as described in company manuals. Performs Materials Receiving inspections as described in company manuals. Performs engine Borescopes as described in engineering orders and OEM data. Performs NDT Inspections as described in engineering orders and OEM data. Self-starter with a team mentality and culture driven mindset. Reports to the Manager, Quality Control. Duties/Responsibilities Plan and control the application of inspection and quality control methods and procedures to ensure the safe, reliable, and economic performance of Breeze aircraft. Support the Quality Control Program, including Required Inspection Items and RII Authorized Inspectors as specified in the Breeze Airways GMM. Support the Receiving Inspection Program, including Receiving Inspection Procedures as specified in the Breeze Airways GMM. Monitor workmanship and materials to verify that applicable Breeze and FAA regulations and standards are complied with. Conduct an on-going program to enhance the level of professionalism and state-of-the-art inspection applications within the inspection department. Administer, and support, and support the NDT program, performance, and workmanship to verify that applicable Breeze and FAA regulations and standards are complied with. Oversee the establishment and implementation of tool procedures and monitor tooling policies and calibration procedures to ensure tooling meets conformity, equivalency, and all calibration standards. Develop recommendations for new tools that promote increased tool and equipment availability, reliability, or enhanced maintenance capability. Support procedures for calibration of tools and equipment based on manufactures recommendations. Recommend changes to the maintenance program and work specifications, based on recurring discrepant conditions found on Breeze aircraft undergoing maintenance. Apprise the Manager of Quality Control and Chief Inspector of any issues that may affect safety, quality, or schedule of Breeze aircraft during aircraft maintenance. Provide leadership and direction to ensure that high standards of performance are maintained in the areas of Quality, Safety. Maintain compliance with SMS and Company safety policies and procedures as well as Federal Regulations by reporting any safety hazard or potential hazard. Include SMS in your daily work habits and remain current in the training requirements for SMS. Embody the Breeze Values and conduct oneself with Safety, Kindness, Integrity, Ingenuity, and Excellence. Perform such other duties as assigned by the Manager. Quality Control and Chief Inspector. Here's what you'll need to be successful Minimum Qualifications Must be at least 18 years of age High school diploma or equivalent educational achievement Must hold a current, valid FAA Airframe and Powerplant License (A&P) with no history of infractions Five years of Aviation Maintenance experience with at least three years in Quality Control/Assurance/Inspection Understanding and working knowledge of FAR part 43, 65, 91, 121, and 145 Must have a valid driver's license Must have a valid passport with no travel restrictions Must have authorization to work in the US as defined by the Immigration Reform Act of 1986 Must be flexible and willing to work days, nights, weekends, holidays, and overtime if needed Must be willing to travel up to 30% of the time Must be willing to work with other departments within the company as needed Must pass a DOT pre-employment drug test Must pass a TSA required fingerprint-based criminal history records check and a Breeze background check Ability to read, write, speak, and understand the English language Preferred Qualifications At least two (2) years in management or a leadership role Degree in Aerospace, Aviation Maintenance, or Business Ten years of FAR 121 air carrier aircraft maintenance experience Understanding of Safety Management System (SMS) rules Skills/Talents Skilled in Microsoft Office Suite (Word, Excel, Outlook) Excellent communications skills, both verbal and written Strong presentation skills with the ability to communicate to Leadership Must be able to handle high-stress situations Ability to work with fellow Team Members with a variety of personalities Ability to multi-task easily Must be fluent in English Exemplifies Breeze's safety culture, values, and mission Perks of the Job Health, Vision and Dental Health Savings Account with Breeze Employee Match 401K with Breeze Employee Match PTO Travel on Breeze and other Airlines too! Breeze Airways provides equal employment opportunities to all Team Members and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Breeze Airways will never request your Social Security Number, Driver's License or Date of Birth on our job postings. Job Postings requesting any or all of this information should be regarded as a scam. To ensure you are applying to an actual Breeze Airways posting, please apply online at ***************** then click “Careers” at the bottom of the page.

About CooperSurgical CooperSurgical is a leading fertility and women's healthcare company dedicated to putting time on the side of women, babies, and families at the healthcare moments that matter most in life. As a division of CooperCompanies, we're driven by a unified purpose to enable patients to experience life's beautiful moments. Guided by our shared values - dedicated, innovative, friendly, partners, and do the right thing - our offerings support patients throughout their lifetimes, from contraception to fertility and birth solutions, to women's and family care, and beyond. We currently offer over 600 clinically relevant medical devices to healthcare providers, including testing and treatment options, as well as an innovative suite of assisted reproductive technology and genomic testing solutions. Learn more at ********************** . Work location: Trumbull, CT (on-site) Scope: The Quality Control Inspector is responsible for inspecting components, subassemblies, and assemblies within the CooperSurgical Trumbull, CT facility. The Quality Control inspector will ensure components, subassemblies, and assemblies comply with approved specifications. Job Summary: The Quality Control Inspector is responsible for performing routine inspections of components, subassemblies, and finished products to ensure compliance with approved drawings, specifications, inspection plans, and regulatory requirements. This role supports product quality, safety, and effectiveness while maintaining compliance with current Good Manufacturing Practices (cGMP), FDA Quality System Regulations (21 CFR 820), and other applicable quality standards.

Our QC Inspector supports Mativ's Sustainable & Adhesive Solutions Function. This individual will perform inspections and tests throughout the manufacturing process to ensure compliance with specifications under the supervision of Quality Engineering. The shift schedule is 6pm-6am. responsibilities: * Performs all auditing and testing of in-process, and finished goods to include Retain, Coat Weight, Cure and any additional testing as required by the Product Requirement Sheet, (PRS) or Tech 11. * Record and enter test results into the Scapa ERP System * Perform all manufacturing audits prior to production and at required intervals. * Maintain and organize product master files. * Coordinate shop floor QC testing based on daily and weekly production schedule. * Issue non-conformance report for any tested material that is out of specification. * Perform visual inspections of materials being coated and slit/converted and immediately inform coating/converting operators of any defects. * Interfaces with Quality Assurance and Production scheduling in the preparation and reviewing of slitting specifications. * Evaluates product quality based on product specifications and makes appropriate usage decisions. * Responsible for setting up test equipment. * Maintaining inventory of QC lab MRO items * Responsible for maintaining all related files and documents according to Good Documentation Practice, (GDP). * Assists in training new QA Inspectors and manufacturing personnel. * Participates as a team member in continuous improvement events. * Maintain QC test equipment and calibration status. * Assists quality engineers and quality technicians with gage R&R, and other validation activities. * Follows safety rules and keeps the work area in a clean and orderly manner. * Complies with company attendance policies. * Issue Supplier Complaints in the ICS, (Internal Complaint System), for nonconforming raw material. qualifications: Required * Minimum of 2 years' experience in Q. A. or Q. C. manufacturing environment. * High School diploma required, bachelor's degree highly preferred. * Familiar with basic measurements, test equipment and basic math skills. * Medical device industry experience preferred. * Ability to communicate and work within a team environment. * Fluency in English both verbal and written Preferred * 2 years' experience in Quality Assurance or Quality Control. * 2 years' experience in medical device or industrial manufacturing. * Associate degree in chemistry, physical sciences, or tech field. Relevant job experience may be considered in place of a 2-year degree. * Able to collaborate and work well with others. Position Demands Conditions are that of a manufacturing environment: * Air Temperatures can range from cold to hot. * The atmosphere may contain dust, fumes, and odors. * May include mechanical, electrical, chemical, explosive and radiation hazards. Employees are required to wear Personal Protective Equipment (PPE) including: * Safety shoes (steel toe or composite toe) * Safety Glasses * Bump Caps * Protective Gloves, when performing certain tasks * Hearing Protection, when required. * Other personal protective equipment as required for certain tasks. While performing the duties of this job the employee must meet the physical demands: * Be able to lift a minimum of 50 pounds. * Be able to work 12-hour shifts. * Perform repetitive tasks. * Routinely stand, sit, hear, walk, and talk. * Reach, climb, bend, kneel, crouch, twist, and balance, sometimes in awkward or tight spaces. * Have good close vision, depth perception, and the ability to focus. WHAT WE OFFER At Mativ, our benefits reflect how much we value and care for each other. We know that employees and their families have unique needs, so our comprehensive benefits offer flexibility, quality, and affordability. Here are just a few of the ways we support your well-being and that of your loved ones: * Medical, dental and vision insurance * Consumer-Driven Health Plan (CDHP) * Preferred Provider Organization (PPO) * Exclusive Provider Organization (EPO) * Company-paid basic life insurance and Additional voluntary life coverage * Paid vacation and competitive personal time off * 401(k) savings plan with company match * Employee assistance programs - available 24/7 to you and your family * Wellness and Work Life Support - career development and educational assistance ABOUT MATIV Mativ Holdings, Inc. is a global leader in specialty materials headquartered in Alpharetta, Georgia. The company connects, protects, and purifies the world every day through a wide range of critical components and engineered solutions that solve our customers' most complex challenges. We manufacture on three continents and generate sales in nearly 100 countries through our family of business-to-business and consumer product brands. The company's two segments, Filtration & Advanced Materials and Sustainable & Adhesive Solutions, target premium applications across diversified and growing end-markets, from filtration to healthcare to sustainable packaging and more. Our broad portfolio of technologies combines polymers, fibers, and resins to optimize the performance of our customers' products across multiple stages of the value chain. Our leading positions are a testament to our best-in-class global manufacturing, supply chain, and materials science capabilities. We drive innovation and enhance performance, finding potential in the impossible. Mativ and its subsidiaries are Equal Opportunity Employers. Qualified applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description Quality Control Technician 6:00am - 4:30pm - Watertown, CT As a Quality Control Technician, you will be responsible for ensuring that all products meet the company's quality standards and specifications. This role involves inspecting materials, components, and finished products, identifying defects, and collaborating with the production team to address quality issues. Key Responsibilities: Perform inspections of incoming materials, in-process components, and finished products to ensure compliance with quality standards. Utilize precision measurement tools such as calipers, micrometers, and gauges to assess product dimensions and tolerances. Document inspection results and maintain accurate records of quality checks and test outcomes. Identify and report non-conformities, collaborating with relevant departments to implement corrective actions. Assist in the development and refinement of quality control procedures and protocols. Support continuous improvement initiatives by providing feedback on quality trends and potential areas for process enhancement. Ensure compliance with industry standards and regulatory requirements related to product quality. Qualifications: High school diploma or equivalent; associate degree in a related field preferred. Prior experience in quality control or inspection within a manufacturing environment. Proficiency in using measurement and testing equipment. Strong attention to detail and analytical skills. Ability to read and interpret technical drawings and specifications. Effective communication skills and ability to work collaboratively in a team setting. Working Conditions: Standing for extended periods and handling materials as required. Exposure to manufacturing environment with noise and machinery. Use of personal protective equipment (PPE) as required. Apply Today! This is an excellent opportunity to join a reputable manufacturer and pursue a position with long-term potential. Apply now to be considered by The Hire Source. Email us at **********************

Entry- Level Quality Control Inspector (Manufacturing - Rubber Products) Portland, CT Monday-Friday | 7:00 AM - 3:30 PM$20-$22/hour (Depending on Experience) We are currently assisting a manufacturing client in Portland, CT with hiring a Quality Control Inspector to support daily inspection activities and ensure product quality standards are consistently met. This is a great opportunity for someone with hands-on quality inspection experience who enjoys working independently in a production environment. Key Responsibilities Perform visual and dimensional inspections on in-process and finished products Use precision measuring tools including calipers, micrometers, and gauges Verify product compliance to prints and specifications (basic blueprint reading) Accurately complete inspection paperwork, logs, and quality documentation Enter inspection data into Excel or internal quality systems Communicate quality issues clearly with production and leadership teams Qualifications Prior experience in a manufacturing or production environment Hands-on experience with quality control or inspection Ability to read basic blueprints and specifications Strong attention to detail and documentation accuracy Reliable, dependable, and able to work independently Apply today if you have quality inspection experience and are looking for your next manufacturing opportunity. Qualified candidates will be contacted to discuss next steps. A.R. Mazzotta is an equal opportunity employer. It is the policy of A.R. Mazzotta to employ, recruit, hire, train and promote individuals without regard to race, color, religious creed, sex, national origin, age, marital status, present or past history of mental disability, intellectual disability, learning disability, or physical disability, religion, political affiliation or belief, pregnancy, ancestry, veteran status, sexual orientation, gender identity or expression or any other status protected by federal, state, or local laws.

Job DescriptionEntry- Level Quality Control Inspector (Manufacturing - Rubber Products) Portland, CT Monday-Friday | 7:00 AM - 3:30 PM$20-$22/hour (Depending on Experience) We are currently assisting a manufacturing client in Portland, CT with hiring a Quality Control Inspector to support daily inspection activities and ensure product quality standards are consistently met. This is a great opportunity for someone with hands-on quality inspection experience who enjoys working independently in a production environment. Key Responsibilities Perform visual and dimensional inspections on in-process and finished products Use precision measuring tools including calipers, micrometers, and gauges Verify product compliance to prints and specifications (basic blueprint reading) Accurately complete inspection paperwork, logs, and quality documentation Enter inspection data into Excel or internal quality systems Communicate quality issues clearly with production and leadership teams Qualifications Prior experience in a manufacturing or production environment Hands-on experience with quality control or inspection Ability to read basic blueprints and specifications Strong attention to detail and documentation accuracy Reliable, dependable, and able to work independently Apply today if you have quality inspection experience and are looking for your next manufacturing opportunity. Qualified candidates will be contacted to discuss next steps. A.R. Mazzotta is an equal opportunity employer. It is the policy of A.R. Mazzotta to employ, recruit, hire, train and promote individuals without regard to race, color, religious creed, sex, national origin, age, marital status, present or past history of mental disability, intellectual disability, learning disability, or physical disability, religion, political affiliation or belief, pregnancy, ancestry, veteran status, sexual orientation, gender identity or expression or any other status protected by federal, state, or local laws.

SIGN ON BONUS $2500 MRO Quality Control Inspector Compliance. Traceability. Accountability. Straton Industries is seeking an MRO Quality Control Inspector to support our Maintenance, Repair, and Overhaul (MRO) operations by performing incoming, in-process, and final inspections of aircraft components throughout the maintenance work cycle. This role is responsible for ensuring all inspection activities comply with applicable FAA regulations, approved technical data, customer requirements, and Repair Station procedures. This position is well-suited for an inspector who values structure, documentation accuracy, and regulatory compliance, and who understands the critical role inspection plays in airworthiness and traceability. Opportunities to take on additional responsibilities exist over time based on demonstrated performance and regulatory knowledge. Key Responsibilities: Perform incoming, in-process, and final inspections of aircraft parts throughout the MRO work cycle Verify maintenance work is performed in accordance with approved technical data, FAA regulations, customer requirements, and Repair Station manuals Conduct detailed visual and dimensional inspections using appropriate inspection methods and calibrated gages Ensure inspection results are accurately documented and fully traceable to the work performed Verify proper identification, segregation, and handling of rejected, and unserviceable parts to prevent unintended reuse Review job travelers and records to confirm required operations, inspections, and sign-offs are complete and logically sequenced Support MRB and nonconformance processes as required Interface effectively with Operations and other Inspectors to coordinate inspection activities Identify inspection or documentation issues and escalate appropriately Required Skills and Experience: Working knowledge of FAA regulations including FAR Part 145 (preferred) Ability to read and interpret engineering drawings, technical data, and work instructions, with a solid understanding of GD&T (Geometric Dimensioning and Tolerancing) Experience using inspection methods and precision measurement tools accurately and consistently CMM operation experience a plus Strong attention to detail with a focus on documentation accuracy and traceability Highly organized, self-motivated, and able to adapt in a regulated environment Ability to recognize nonconformances and support corrective action activities Effective verbal and written communication skills Basic proficiency with Microsoft Office (Word, Excel, Outlook) Willingness to participate in the Company's Drug and Alcohol Program (required). Why Join Us? We offer a comprehensive benefits package, including: Medical, Dental, and Vision Insurance Life Insurance 401(k) with company match Paid Time Off and Holiday Pay A team-oriented workplace that values your expertise and contributions How to Apply If you're passionate about quality, detail-oriented, and ready to grow with an industry leader, we want to hear from you. Apply now by sending us your resume and let's start the conversation! Candidates must be authorized to work in the United States. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law .

Enjet Aero machines and fabricates complex jet engine parts, components and assemblies for leading OEMs in the commercial, defense and general aviation sectors. Our goal is to be regarded as an irreplaceable resource by our customers. The only way for a company to meet such a goal is to consistently meet production deadlines and expectations. Position Description: Quality Inspector will perform in-process and 1 st article inspections, evaluate part to print specifications and understand the inspection methods used for inspection and support the manufacturing process and personnel, while adhering to the Quality Policy, AS 9100 requirements. Position reports to the Quality Manager and takes daily direction from the Inspection Supervisor. You will receive a 20% night shift premium. Essential Responsibilities: Strong blueprint and Geometric Dimensioning & Tolerance (GD&T) comprehension Able to use inspection tools, such as micrometer, indicators, comparator, etc Detailed to complete all paperwork, as required, including inspection reports Able to make mold casts to check ID dimensions Ability to identify dimensional and visual defects Able to understand and implement customer specifications and requirements Accuracy and attention to detail is highly important Experienced with completing 1 st article inspections, in-process inspections and final inspections Knowledge of aerospace specifications and requirements preferred. Perform other duties as required Qualifications: Proficient at reading blueprints Knowledge of dimensional symbols Ability to identify visual defects Ability to read micrometers, calipers and comparator Knowledge of measuring equipment Ability to work together for team effort Team oriented Organized and detail oriented Adherence to document control requirements Knowledge of various inspection reports General computer knowledge Ability to work without supervision Benefits: Enjet offers a comprehensive benefits package to full-time employees including paid time off, health insurance, dental insurance, vision insurance, paid holidays, a 401K retirement plan, disability insurance, and more. As an EOE/AA employer, Enjet Aero will not discriminate in its employment practices due to an applicant's race, color, religious creed, national origin, ancestry, sex, age, veteran status, marital status or physical challenges.

SIGN ON BONUS $2500 Advanced Quality Control Inspector Precision. Accountability. Technical Excellence. Straton Industries is seeking an Advanced Quality Control Inspector who sets the standard through the quality of their work. This is a senior, hands-on role with advancement opportunities earned through demonstrated capability, initiative, and results. The right candidate leads by example, earns trust through execution, and is motivated to grow into greater responsibility over time. This role is designed for a senior inspector who takes ownership of inspection quality, demonstrates sound judgment, and consistently follows through. Opportunities for increased responsibility exist over time and are based on demonstrated performance and readiness. Key Responsibilities: Perform advanced inspections on high-mix, tight-tolerance machined parts using both manual gaging and programmable inspection equipment Program and operate CMMs using PC-DMIS software ( required ) Interpret engineering drawings, specifications, and GD&T to verify conformance Take ownership of inspection quality by identifying issues early and ensuring accurate disposition Document inspection results clearly and accurately using required forms and systems Support deviation, nonconformance, and corrective action processes as required Follow established procedures, work instructions, standards, and customer-specific requirements Act as a technical resource through experience, judgment, and reliability. Required Skills and Experience: 7+ years of Quality Control experience in precision machining Proven experience programming and operating CMMs using PC-DMIS software ( required ) Strong working knowledge of GD&T (Geometric Dimensioning and Tolerancing) High proficiency with precision measurement tools, including comparators, microhites, micrometers, indicators, and similar equipment Demonstrated ability to work independently, make sound inspection decisions, and follow through Strong attention to detail with consistent, accurate documentation practices Strong ability to adapt to a fast-paced environment. Effective verbal and written communication skills Aerospace industry experience a plus Familiarity with quality standards such as AS9100 (preferred). Why Join Us? We offer a comprehensive benefits package, including: Medical, Dental, and Vision Insurance Life Insurance 401(k) with company match Paid Time Off and Holiday Pay A team-oriented workplace that values your expertise and contributions How to Apply If you're passionate about quality, detail-oriented, and ready to grow with an industry leader, we want to hear from you. Apply now by sending us your resume and let's start the conversation! Candidates must be authorized to work in the United States. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law .