Maintenance Technician jobs at Johnson Controls - 13142 jobs

$1000 Sign On Bonus!! SUMMARY: We are looking for an addition to our Maintenance Team that has a background in electronics troubleshooting ESSENTIAL DUTIES AND RESPONSIBILITIES: Duties to include but not limited to installation, set up programming, trouble shooting and repair of machinery, instruments, controls and related equipment. Individual will demonstrate advanced electrical trouble shooting skills, a through working knowledge of the National Electrical Code and the ability to install and maintain electrical systems. Work from sketches, equipment manuals, basic designs, specifications and verbal instructions. Continue to keep abreast of new developments through study, schooling, etc. as necessary. Follow all OSHA and company safety regulations. Assist other maintenance personnel as well. Will assist in training when needed. Other duties may be assigned. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: Three to five years related experience and/or training; or equivalent combination of education and experience. MATHEMATICAL and/or COMPUTER SKILLS: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Knowledge of computer operation and related software required. REASONING ABILITY: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. CERTIFICATES, LICENSES, REGISTRATIONS: Operate fork lift truck (will be licensed in accordance with OSHA power industrial truck operator requirements.) Trained in the National Electric Code. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must regularly lift and or move up to 10 lbs. and occasionally lift and/or move up to 100 lbs. with the use of jib cranes and other moving and lifting devices. While performing the duties of this job, the employee is frequently required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch, or crawl; and taste or smell. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. It is the employee's responsibility to properly utilize all required safety equipment and apparel at all times. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and risk of electrical shock. The employee is occasionally exposed to loud continuous noise; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; loud continuous noise; extreme heat; and vibration. The noise level in the work environment is usually loud. Electric Materials Company provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. *Sign on Bonus will be paid after successful completion of Probationary Period 2nd Shift 3pm -11 pm or 3pm -12 AM Compensation details: 26-28 Hourly Wage PIf891659a9669-37***********6

Join a mission-driven team as a Senior Remote Maintenance Support Technician (Govt Programs) performing advanced troubleshooting, inspections, and return-to-service certifications on BK 117 C 2/ D 3 and EC 135 aircraft. We are looking for a seasoned Support Technician, Maintenance, Technician, Support, Leadership, Remote, Manufacturing, Technology

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, Mxico y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fbricas funcionen mejor. Principal Duties/Responsibilities: Performs mid to expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. Identifies and sources parts, supplies and repair items as necessary. Independently performs maintenance as per industry standards. May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. Complies with 5S and housekeeping standards. Drives and participates in CI activities - processes, results and cost savings. Updates records and reviews CMMS history. Troubleshoots and analyzes control systems to resolve software/ hardware and configuration problems. Utilizes predictive maintenance technologies to collect equipment performance data. Provides assistance to lower level technicians and leadership to small teams. Performs more advanced functions as a part of training and development. Completes on-the-job and technical self-study programs for career development. Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: High School Graduate or equivalent (GED). Associates degree with a Technical focus and 3 years of related experience in general industry; or 5 years of related experience in general industry or successful completion of the ATS Technician Progression Program. Understands electrical, mechanical, fluid power and control systems. Can analyze problems and perform repairs. Must be able to use basic hand tools and specialized tools as appropriate May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range $36.78$47.03 USDATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religin, sexo (incluido el embarazo, identidad de gnero y orientacin sexual), origen nacional, discapacidad, estatus de veterano, informacin gentica u otro estatus legalmente protegido. Revisin de la poltica de privacidad aqu here.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, Mxico y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fbricas funcionen mejor. Principal Duties/Responsibilities: Performs expert level break-fix & preventive maintenance, and/or design of mechanical, and electrical equipment improvements as well as complex systems as the employees job specialty requires. Provides troubleshooting support on equipment and technical support on production lines as appropriate for the employees job specialty. Maintains in-depth technical knowledge of numerous systems as the employees job specialty requires. Performs research and procedures as the employees job specialty requires. Programs, troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. Utilizes predictive equipment and interprets results for analysis, equipment condition assessment, troubleshooting and proactive maintenance. Including but not limited to infrared thermography, ultrasonic testing, power quality analysis, laser interferometry, ball bar, and vibration analysis. Leads, drives and participates in CI activities--processes, results and cost savings using CI tools and methodology. Identifies and sources parts, supplies and repair items as necessary. Suggests alternative items and engineered solutions to improve reliability. Independently performs maintenance as per industry standards. Complies with 5S and housekeeping standards. May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. Studies and investigates technical and systems methods, tools, and innovations that can be implemented in ATS sites to improve maintenance practices and updates documentation. Prepares input for cost analysis for new equipment, repair/rebuild proposals, cost savings and innovations as required. Updates records and reviews CMMS history and analyzes data. Provides technical contents of sales quotations and performs T&M duties as required. Trains and coaches less proficient technician. Assumes project manager responsibilities as assigned. Completes and conducts on-the-job training and technical self-study programs for career development. Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: High School Graduate or equivalent (GED). Associates degree with a Technical focus and 7 years of related experience in specific industry; or, 10 years of experience in specific industry. Proficiency in predictive technologies including vibration analysis or laser interferometer operations, precision alignments, and maintenance of applicable process equipment. Understands electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs. Must be able to use hand tools and specialized tools as appropriate. May be required to travel. Six Sigma experience desired. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range $102,970$131,689.52 USDATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religin, sexo (incluido el embarazo, identidad de gnero y orientacin sexual), origen nacional, discapacidad, estatus de veterano, informacin gentica u otro estatus legalmente protegido. Revisin de la poltica de privacidad aqu here.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, Mxico y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fbricas funcionen mejor. Principal Duties/Responsibilities: Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to locate root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. Identifies and sources parts, supplies and repair items as necessary. Performs evaluations of alternatives to improve cost and / or reliability of equipment. Independently performs maintenance as per industry standards. Works with Planner Scheduler to optimize preventative maintenance procedures. May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. Complies with 5S and housekeeping standards. Leads, drives and participates in CI activities--processes, results and cost savings using CI tools and methodology. Provides assistance to lower level technicians and leadership to project teams. Performs expert functions as a part of training and development. Troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. Utilizes predictive maintenance technologies to collect equipment performance data. Observes trends and makes recommendations. Updates records and reviews CMMS history and analyzes data. Completes and conducts on-the-job training and technical self-study programs for career development. Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: Knowledge and experience of Boiler System, Ammonia and Freon Chillers, Air Compressors, Glycol and AHU cooling systems, Fire protection system, Air Handling system and Waste Water system. Perform mechanical, plumbing, piping, and basic electrical repairs Maintain accurate maintenance logs and documentation within the CMMS Conduct routine preventive maintenance, including filter changes, belt inspections, lubrication, and system performance tuning. Support operation and repair of wastewater treatment equipment and maintain potable water systems, pumps, chemical feed systems, valves, and associated piping. Perform scheduled inspections, diagnostics, and repairs on steam and hot-water boilers. Troubleshoot system pressures, oil levels, electrical controls, and moisture problems. Must be able to use basic hand tools and specialized tools as appropriate. Support emergency repair needs and participate in an on-call rotation as required. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range $36.78$47.03 USDATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religin, sexo (incluido el embarazo, identidad de gnero y orientacin sexual), origen nacional, discapacidad, estatus de veterano, informacin gentica u otro estatus legalmente protegido. Revisin de la poltica de privacidad aqu here.

Job Summary: The Utility Technician is an entry level role. They will work closely with experienced shop and field techs and assist them as needed. They may be asked to perform repairs based on their skill set. Job Responsibilities: Perform daily and operational activities in the service department to include the following, but not limited to: Assist all service team members as needed Clean parts, scrape gaskets, prep for assembly Clean and prep all rental equipment Maintain safety and cleanliness of work environment Assist with lube truck work as needed Travel to jobsites and vendor training sessions as needed All other job duties as assigned by Service Manager, Rental Foreman, or Shop Supervisor Job Qualifications: Must have High School Diploma or equivalent, a 2 year technical degree or comparable military training is preferred Experience in the heavy equipment industry or a related field a plus Excellent written and oral communication and basic mathematical skills. Proficient with a computer, including the use of Microsoft programs (Word, Excel, PowerPoint, etc.) and diagnostic use using manufacturer provided programs. Must have a good working knowledge of equipment operations and mechanical functions. Ability to stoop, kneel, push, pull, twist and carry and lift up to 70lbs. Ability to climb and perform work on heights of 15 feet Able to work in all types of weather conditions Maintain excellent customer service Must be able to pass a background, physical, and drug screen

Job Summary: The Part-Time Utility Technician is an entry level role. They will work closely with experienced shop and field techs and assist them as needed. They may be asked to perform repairs based on their skill set. Job Responsibilities: Perform daily and operational activities in the service department to include the following, but not limited to: Assist all service team members as needed Clean parts, scrape gaskets, prep for assembly Clean and prep all rental equipment Maintain safety and cleanliness of work environment Assist with lube truck work as needed Travel to jobsites and vendor training sessions as needed All other job duties as assigned by Service Manager, Rental Foreman, or Shop Supervisor Job Qualifications: Must have High School Diploma or equivalent. A technical degree or comparable military training is preferred Experience in the heavy equipment industry or a related field is a plus Excellent written and oral communication and basic mathematical skills. Proficient with a computer, including the use of Microsoft programs (Word, Excel, PowerPoint, etc.) and diagnostic use using manufacturer provided programs. Must have a working knowledge of equipment operations and mechanical functions. Ability to stoop, kneel, push, pull, twist and carry and lift up to 70lbs. Ability to climb and perform work on heights of 15 feet Able to work in all types of weather conditions Maintain excellent customer service Must be able to pass a background, physical, and drug screen

**Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better.** **Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor.** **Principal Duties/Responsibilities:** · Performs mid to expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. · Independently performs maintenance as per industry standards. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Complies with 5S and housekeeping standards. · Drives and participates in CI activities - processes, results and cost savings. · Updates records and reviews CMMS history. · Troubleshoots and analyzes control systems to resolve software/ hardware and configuration problems. · Utilizes predictive maintenance technologies to collect equipment performance data. · Provides assistance to lower level technicians and leadership to small teams. Performs more advanced functions as a part of training and development. · Completes on-the-job and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. **Knowledge, Skills, Abilities, & Behaviors Required:** · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 3 years of related experience in general industry; or 5 years of related experience in general industry or successful completion of the ATS Technician Progression Program. · Understands electrical, mechanical, fluid power and control systems. Can analyze problems and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate **Physical Demands and Working Conditions:** While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. **ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. (********************************************************************************************************* **ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here. (********************************************************************************************************* ATS is committed to providing equal employment opportunity in all aspects of employment to all applicants and employees, regardless of age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information or other legally protected status.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, Mxico y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fbricas funcionen mejor. Principal Duties/Responsibilities: Performs entry to mid-level break-fix & preventative maintenance. This includes but not limited to: adjusting functional parts of devices and control instruments to sustain and improve operations; repairing or replacing defective parts; reconditioning or repairing machine tools. Identifies needed parts, supplies, and repair items. Provides support and back up for other members of department as needed by leadership. Is aware of Maintenance Industry Standards. Assures compliance with 5S and housekeeping standards. Participates in CI activities - processes, results and cost savings. May be required to setup and operate simple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform basic welding tasks. Updates records and reviews CMMS history. Performs basic troubleshooting of control systems circuitry. Completes technical self-study programs for career development. Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: High School Graduate or equivalent (GED). Associates degree with a Technical focus or 18 months of related experience in general industry or successful completion of the ATS Technician Progression Program. Understanding of basic electrical and mechanical systems. Can perform repairs. Must be able to use basic hand tools. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range $21.42$27.38 USDATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religin, sexo (incluido el embarazo, identidad de gnero y orientacin sexual), origen nacional, discapacidad, estatus de veterano, informacin gentica u otro estatus legalmente protegido. Revisin de la poltica de privacidad aqu here.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, Mxico y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fbricas funcionen mejor. Principal Duties/Responsibilities: Performs entry to mid-level break-fix & preventative maintenance. This includes but not limited to: adjusting functional parts of devices and control instruments to sustain and improve operations; repairing or replacing defective parts; reconditioning or repairing machine tools. Identifies needed parts, supplies, and repair items. Provides support and back up for other members of department as needed by leadership. Is aware of Maintenance Industry Standards. Assures compliance with 5S and housekeeping standards. Participates in CI activities - processes, results and cost savings. May be required to setup and operate simple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform basic welding tasks. Updates records and reviews CMMS history. Performs basic troubleshooting of control systems circuitry. Completes technical self-study programs for career development. Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: High School Graduate or equivalent (GED). Associates degree with a Technical focus or 18 months of related experience in general industry or successful completion of the ATS Technician Progression Program. Understanding of basic electrical and mechanical systems. Can perform repairs. Must be able to use basic hand tools. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religin, sexo (incluido el embarazo, identidad de gnero y orientacin sexual), origen nacional, discapacidad, estatus de veterano, informacin gentica u otro estatus legalmente protegido. Revisin de la poltica de privacidad aqu here.

Job Title: 1st Class Maintenance Mechanic/Technician Department: Maintenance Reports to: Maintenance Supervisor/Manager We are seeking a dedicated and skilled Maintenance Technician to join our team. The ideal candidate will be responsible for ensuring the optimal performance of bakery equipment and systems, performing preventative maintenance, troubleshooting, and repairs. You will be part of a dynamic team, working to enhance production efficiency while promoting a safe and effective working environment. This position requires flexibility, strong technical skills, and the ability to work independently. Key Responsibilities: Performance & Attitude • Complete work in a timely manner while maintaining a high level of quality. • Maintain consistent attendance and adapt to changing production schedules. • Demonstrate a willingness to learn new skills and assist in various tasks, including labeling and organizing parts. • Maintain a clean and organized work area, including the maintenance shop. • Assist in training and mentoring co-workers to enhance their individual skills. • Participate in meetings and actively engage in project discussions. • Work effectively without supervision, being self-motivated and proactive in identifying work assignments. • Take pride in your work by demonstrating consistent quality in all tasks. • Provide support during equipment/system failures and assist in troubleshooting and providing permanent solutions. • Assist in implementing projects and driving improvements. • Promote teamwork and maintain a positive attitude in the work environment. • Help coordinate department meetings and training initiatives. Safety • Possess or be willing to learn basic first aid training. • Demonstrate knowledge of safe manufacturing practices (OSHA regulations). • Safely use and promote personal protective equipment (PPE). • Understand and adhere to General Manufacturing Practices (GMPs). • Ensure safe operation of shop tools and promote safety programs. • Assist in performing equipment safety evaluations and help implement new safety initiatives. Communication • Clearly communicate ideas and information across teams. • Collaborate with Maintenance & Production shift leaders for smooth operations. • Assist operators in evaluating equipment and machinery performance. • Document maintenance activities effectively using maintenance reports. Mechanical Skills • Use basic shop tools efficiently for equipment repair and maintenance. • Clean, lubricate, repair, and replace parts of equipment and machinery as required. • Identify defects and excessive wear on parts, ensuring timely repairs. • Utilize CMMS (Computerized Maintenance Management System) to document repairs and manage work orders. • Understand and interpret mechanical drawings for troubleshooting and repairs. • Demonstrate strong understanding of bakery equipment and related systems (HVAC, refrigeration, electrical). • Demonstrate repair/rebuild of complex components and equipment utilizing equipment drawings and specifications. CMMS & Inventory Control • Operate and manage CMMS systems for work order tracking, repairs, and preventive maintenance. • Record parts usage for inventory control and manage repair part inventories. • Modify and create work orders based on changing production needs and downtime schedules. • Perform basic computer tasks related to CMMS system functions. Machining & Fabrication Skills • Fabricate and modify replacement parts for equipment, such as shafts and sprockets. • Supervise the fabrication of custom components and assist in design changes for production. Electrical Skills • Perform basic electrical troubleshooting, including motor issues and control systems. • Read and understand wiring schematics, electrical specifications, and system layouts. • Troubleshoot and replace electrical components as needed. • Ability to troubleshoot control systems utilizing 480Vac and 120V/Low Voltage control power. • Knowledge of motor overload circuits and transformer applications. • Assist in supervising electrical system modifications and installations. Welding and Fabrication • Safely operate welding equipment, including arc, wire feed, and gas welding. • Weld mild steel and stainless steel. • Use cutting tools, grinders, and other equipment for metal fabrication. Pneumatic & Hydraulic Systems • Troubleshoot and repair pneumatic and hydraulic systems, ensuring optimal functioning. • Perform preventive maintenance on pneumatic and hydraulic systems. • Modify equipment as needed to meet changing production demands. Boiler and Refrigeration Systems • Perform basic maintenance and troubleshooting on boiler and refrigeration systems. • Conduct safety inspections and ensure compliance with operating parameters. • Assist with repairs and modifications for improved efficiency. PLC and Process Control Systems • Assist in basic PLC system troubleshooting and component replacements. • Help with visual troubleshooting and understanding control system components. Supervisory Skills • Use programs like spreadsheets, word processors, and CMMS systems to manage data. • Assist in organizing and guiding maintenance teams, ensuring efficient task execution. • Gather and organize critical data for safety, equipment, and production. Qualifications & Requirements • High school diploma or equivalent required; additional technical certifications or trade school education preferred. • Proven experience in equipment maintenance and troubleshooting in a manufacturing or bakery environment. • Strong mechanical, electrical, and fabrication skills. • Familiarity with CMMS and inventory control systems. • Basic understanding of pneumatic, hydraulic, boiler, and refrigeration systems. • Ability to work independently and as part of a team. • Excellent problem-solving and troubleshooting skills. • Ability to follow safety protocols and promote a safe working environment. • Strong communication and interpersonal skills. • Ability to lift heavy objects and work in a physically demanding environment

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, Mxico y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fbricas funcionen mejor. Principal Duties/Responsibilities: Performs mid to expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. Identifies and sources parts, supplies, and repair items as necessary. Independently performs maintenance as per industry standards. May be required to set up and operate multiple machining operations, including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. Complies with 5S and housekeeping standards. Drives and participates in CI activities - processes, results, and cost savings. Updates records and reviews CMMS history. Troubleshoots and analyzes control systems to resolve software/ hardware and configuration problems. Utilizes predictive maintenance technologies to collect equipment performance data. Provides assistance to lower-level technicians and leadership to small teams. Performs more advanced functions as part of training and development. Completes on-the-job and technical self-study programs for career development. Follows all safety-related policies, rules, regulations, technical instructions, and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: High School Graduate or equivalent (GED). Associate's degree with a Technical focus and 3 years of related experience in general industry; or 5 years of related experience in general industry, or successful completion of the ATS Technician Progression Program. Understands electrical, mechanical, fluid power, and control systems. Can analyze problems and perform repairs. Must be able to use basic hand tools and specialized tools as appropriate May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religin, sexo (incluido el embarazo, identidad de gnero y orientacin sexual), origen nacional, discapacidad, estatus de veterano, informacin gentica u otro estatus legalmente protegido. Revisin de la poltica de privacidad aqu here.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, Mxico y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fbricas funcionen mejor. Principal Duties/Responsibilities: Performs mid to expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. Identifies and sources parts, supplies and repair items as necessary. Independently performs maintenance as per industry standards. May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. Complies with 5S and housekeeping standards. Drives and participates in CI activities - processes, results and cost savings. Updates records and reviews CMMS history. Troubleshoots and analyzes control systems to resolve software/ hardware and configuration problems. Utilizes predictive maintenance technologies to collect equipment performance data. Provides assistance to lower level technicians and leadership to small teams. Performs more advanced functions as a part of training and development. Completes on-the-job and technical self-study programs for career development. Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: High School Graduate or equivalent (GED). Associates degree with a Technical focus and 3 years of related experience in general industry; or 5 years of related experience in general industry or successful completion of the ATS Technician Progression Program. Understands electrical, mechanical, fluid power and control systems. Can analyze problems and perform repairs. Must be able to use basic hand tools and specialized tools as appropriate May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religin, sexo (incluido el embarazo, identidad de gnero y orientacin sexual), origen nacional, discapacidad, estatus de veterano, informacin gentica u otro estatus legalmente protegido. Revisin de la poltica de privacidad aqu here.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, Mxico y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fbricas funcionen mejor. Principal Duties/Responsibilities: Performs mid to expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. Identifies and sources parts, supplies and repair items as necessary. Independently performs maintenance as per industry standards. May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. Complies with 5S and housekeeping standards. Drives and participates in CI activities - processes, results and cost savings. Updates records and reviews CMMS history. Troubleshoots and analyzes control systems to resolve software/ hardware and configuration problems. Utilizes predictive maintenance technologies to collect equipment performance data. Provides assistance to lower level technicians and leadership to small teams. Performs more advanced functions as a part of training and development. Completes on-the-job and technical self-study programs for career development. Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: High School Graduate or equivalent (GED). Associates degree with a Technical focus and 3 years of related experience in general industry; or 5 years of related experience in general industry or successful completion of the ATS Technician Progression Program. Understands electrical, mechanical, fluid power and control systems. Can analyze problems and perform repairs. Must be able to use basic hand tools and specialized tools as appropriate May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religin, sexo (incluido el embarazo, identidad de gnero y orientacin sexual), origen nacional, discapacidad, estatus de veterano, informacin gentica u otro estatus legalmente protegido. Revisin de la poltica de privacidad aqu here.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, Mxico y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fbricas funcionen mejor. Principal Duties/Responsibilities: Performs mid to expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. Identifies and sources parts, supplies and repair items as necessary. Independently performs maintenance as per industry standards. May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. Complies with 5S and housekeeping standards. Drives and participates in CI activities - processes, results and cost savings. Updates records and reviews CMMS history. Troubleshoots and analyzes control systems to resolve software/ hardware and configuration problems. Utilizes predictive maintenance technologies to collect equipment performance data. Provides assistance to lower level technicians and leadership to small teams. Performs more advanced functions as a part of training and development. Completes on-the-job and technical self-study programs for career development. Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: High School Graduate or equivalent (GED). Associates degree with a Technical focus and 3 years of related experience in general industry; or 5 years of related experience in general industry or successful completion of the ATS Technician Progression Program. Understands electrical, mechanical, fluid power and control systems. Can analyze problems and perform repairs. Must be able to use basic hand tools and specialized tools as appropriate May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religin, sexo (incluido el embarazo, identidad de gnero y orientacin sexual), origen nacional, discapacidad, estatus de veterano, informacin gentica u otro estatus legalmente protegido. Revisin de la poltica de privacidad aqu here.

Job Title: Enhanced Building Maintenance Team - General Technician Department: Enhanced Building Maintenance Reports to: Enhanced Building Maintenance Team Supervisor Salary Level 6: $60,588 FLSA Status: Non - Exempt We are seeking a General Maintenance Repair Technician to join our team. Your primary responsibility will preventative and corrective maintenance to various customer facing systems and fixtures that include but is not limited to automatic soap dispensers, faucets and flush valves, paper dispensers, door latches and locks and other miscellaneous repairs across the public areas of the CPTC. Scheduled hours will be centered around 3rd shift primarily with a need to adjust depending on requirements or needs. Responsibilities: The following is a list of duties and expectations within the role: • Adhere to all safety policies and procedures without exception. • Repair and maintain a variety of customer facing systems and equipment. • Maintain work complete and service records for all equipment. • Coordinate and prioritize workload with your supervisor. • Operation of forklift machinery. • Perform other duties as assigned by your supervisor. Skills & Requirements Qualifications and Requirements: • High school diploma or GED preferred. • Must be able to read and write English proficiently. • Minimum of 3 years of experience in a general maintenance or repair environment, plumbing and electrical experience is a plus. • Experience in failure analysis and determining the best repair methods. • Safely and effectively use a variety of hand and power tools. Working Conditions: • Must have a valid GA driver's license and driving record void of recent major moving violations. • Must successfully pass a background check for insurance and security processes. • Must be able to pass a physical agility test. • Ability to lift to 75 pounds and handle a variety of tools, equipment, and supplies. • Most of the workday will be spent standing. • Some outdoor work can be required in all weather conditions. • Hazardous materials handling. • Occasional shift variance to include weekend or holiday work as required. • Steel-toed shoes must be worn on duty. Additional Qualifications: • Commitment to safety, quality, and meeting departmental goals. • Strong interpersonal skills to build relationships with customers, tenants, contractors, and AATC Staff. • Must be a team player and demonstrate strong organizational skills. This position is in Atlanta, GA. Atlanta Airlines Terminal Company is an Equal Opportunity Employer offering competitive compensation and an excellent benefits package. Qualifications

Maintenance Technician 2nd shift$1.75 Shift Differential. Manufacturing Environment. The Maintenance Technician is responsible for maintaining, troubleshooting, and repairing manufacturing equipment, machinery, and facility systems Maintenance Technician, Technician, Maintenance, 2nd Shift, Mechanical, Technical

Maintenance Technician 2nd shift $1.75 Shift Differential Manufacturing Environment The Maintenance Technician is responsible for maintaining, troubleshooting, and repairing manufacturing equipment, machinery, and facility systems to ensure safe, efficient, and reliable operations. This role supports production by performing preventive, scheduled, and emergency maintenance on mechanical, electrical, pneumatic, hydraulic, and automated equipment in a manufacturing environment. The ideal candidate has hands-on maintenance experience, strong troubleshooting skills, and the ability to read technical documentation such as schematics, diagrams, and service manuals. Key Responsibilities Maintenance & Repair * Perform mechanical, electrical, pneumatic, hydraulic, plumbing, welding, and fabrication repairs on production, packaging, and processing equipment * Troubleshoot equipment failures by observing operation, listening to sounds, and diagnosing mechanical or electrical issues * Install, test, and commission new machinery and auxiliary equipment * Perform preventive and predictive maintenance to reduce downtime and improve reliability * Respond to emergency breakdowns and unplanned maintenance events Technical & Documentation * Read and interpret electrical schematics, technical drawings, service manuals, and work orders * Accurately document maintenance activities, labor hours, and equipment service records * Analyze data and perform basic mathematical calculations related to maintenance tasks Safety, Quality & Compliance * Follow all safety policies and procedures, including Lockout/Tagout (LOTO) * Wear required personal protective equipment (PPE) and maintain clean, organized work areas * Identify and report unsafe conditions or equipment * Follow all quality system and safety protocols Collaboration & Communication * Communicate equipment issues, repair status, and production impacts with management and other departments * Work independently and collaboratively within a team environment * Contribute ideas for continuous improvement in maintenance processes, safety, and efficiency Required Qualifications Education * High school diploma or equivalent (required) * Bachelor's degree in a related field (preferred but not required) Experience * 1-2 years of maintenance experience in a manufacturing or industrial environment * Experience working with production machinery, conveyors, motors, and mechanical systems Skills & Competencies * Strong mechanical and electrical troubleshooting skills * Knowledge of preventive and corrective maintenance practices * Ability to operate hand tools, power tools, and precision measuring instruments * Ability to read and understand technical documentation and schematics * Strong organizational, time management, and multitasking abilities * Results-driven mindset with strong problem-solving skills * Ability to adapt to changing priorities in a fast-paced environment Additional Expectations * Available for emergency repairs and breakdown situations as needed * Willingness to attend training and continuously develop technical skills * Maintain good housekeeping and tool organization * Support team and company goals through reliable performance and accountability Work Environment * Manufacturing / industrial facility * Exposure to machinery, moving equipment, noise, and industrial materials * Physical requirements may include standing, bending, lifting, and working in confined spaces

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, Mxico y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fbricas funcionen mejor. Principal Duties/Responsibilities: Performs entry to mid-level break-fix & preventative maintenance. This includes, but is not limited to: adjusting functional parts of devices and control instruments to sustain and improve operations; repairing or replacing defective parts; reconditioning or repairing machine tools. Identifies needed parts, supplies, and repair items. Provides support and back up for other members of the department as needed by leadership. Is aware of Maintenance Industry Standards. Assures compliance with 5S and housekeeping standards. Participates in CI activities - processes, results, and cost savings. May be required to set up and operate simple machining operations, including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform basic welding tasks. Updates records and reviews CMMS history. Performs basic troubleshooting of control systems circuitry. Completes technical self-study programs for career development. Follows all safety-related policies, rules, regulations, technical instructions, and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: High School Graduate or equivalent (GED). Associates degree with a Technical focus or 18 months of related experience in general industry or successful completion of the ATS Technician Progression Program. Understanding of basic electrical and mechanical systems. Can perform repairs. Must be able to use basic hand tools. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religin, sexo (incluido el embarazo, identidad de gnero y orientacin sexual), origen nacional, discapacidad, estatus de veterano, informacin gentica u otro estatus legalmente protegido. Revisin de la poltica de privacidad aqu here.