Electrical Design Engineer jobs at Kiewit

Burns & McDonnell is a company made up of more than 10,000 engineers, architects, construction professionals, scientists, consultants, and entrepreneurs with offices across the country and throughout the world. Project focus would be mission-critical data center projects. This opportunity hires directly into our Mission Critical team and into a multibillion-dollar industry that is growing at an exponential rate. Data Centers are an aggressive market for Burns & McDonnell and are highlighted by several priority articles on our site. Mission Critical is an international practice for Burns & McDonnell that involves exciting, collaborative work across many different departments. This position requires an experienced electrical engineer capable of successfully solving difficult problems that require adaptation and modification of standard techniques, procedures and criteria. This candidate will lead design, planning and client coordination activities associated with high, medium and low voltage electrical distribution and control systems found in mission critical, healthcare, and industrial sites. Key responsibilities: + Designs electrical systems/equipment to provide a useful and safe environment for the Mission Critical market in accordance with the clients' requirements for reliability and uptime. + Advises clients regarding electrical systems/requirements available to meet their needs and comply with all applicable codes. + Monitors installation of designed equipment/systems to ensure compliance with design documents. + Conducts fault studies and load flow analysis. Develop design criteria for protective device coordination, relay applications, medium voltage transformers, switchgear, medium and low voltage distribution. + Able to develop and/or lead the design of electrical master plans for facilities encompassing but not limited to the following: reliable power distribution, motor control centers, energy-efficient lighting systems, communications and telecom routing, instrumentation and controls for HVAC systems, fire-alarm interface, building level uninterrupted power systems (UPS) systems, engine generators. + Reviews electrical designs and specifications of equipment or systems being purchased or fabricated. + Provides electrical design direction and resource management on multi-discipline projects. + Developing concept studies, designs, and narratives. + Participate in the Identification, recruiting and management of resources to meet the needs of the business + All other duties as assigned. **Qualifications** + Bachelor of Science in Electrical Engineering or related degree from an ABET accredited program. + Or Bachelor of Science in Electrical or related Engineering Technology from an ABET accredited program and successful completion of Fundamentals of Engineering (FE) exam. + Master of Science degree in Electrical Engineering a plus. + 7 years electrical engineering experience. EPC project experience preferred. + Professional Engineering License (PE) preferred. + Expert knowledge in standard engineering techniques and procedures. + Strong knowledge of electrical equipment design ANSI and IEEE Standards. Strong computer skills (e.g. Microsoft Office Suite). + Excellent written and verbal communication skills. + Experience with leading the discipline design for large projects and delegating work tasks to team members. Ability to lead execution of work and resolve issues in a team environment. + Demonstrated critical thinking skills, ability to work methodically and analytically in a quantitative problem-solving environment. + Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills. + Ability to perform quality reviews for detailed engineering documents and specifications. + Ability to travel. This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled. EEO/Disabled/Veterans **Job** Electrical Engineering **Primary Location** US-OH-Columbus **Schedule:** Full-time **Travel:** Yes, 25 % of the Time **Req ID:** 251325 **Job Hire Type** Experienced #LI-EH #GFS

Our Transmission & Distribution global practice is looking for an Electrical Engineer to support our Saint Louis office. This person will serve as a lead engineer on telecommunications projects. You will have the opportunity at Burns & McDonnell to build your own success story, both personally and professionally. You will be empowered to build your career with a company that supports the creation of infrastructure for the largest and most complex machine humans have ever built, and which literally powers our society. Join our team working on dynamic projects engineering communications and network solutions that are modernizing today's electric grid infrastructure. We want you to bring your unique experiences, talents, and perspectives to our diverse team to make our client projects successful! Networks, Integration & Automation (NIA) Projects As an engineer at Burns & McDonnell, you will be a key part of our nationwide team. Burns & McDonnell will provide you on-the-job training, technical mentorship, and personal development as you support the following projects: - Grid Modernization: Now, more than ever, reliable and secure communication for grid operations is essential. We work with electric utilities to expand their capabilities with the latest technologies for remote monitoring, automation, and control to improve their operational efficiency. - Networks: We help our clients build redundant, long-haul, high-capacity data networks via a variety of technologies that are used for both business/IT needs as well as the day-to-day operational needs that keep the lights on. - Renewable Energy: With the expansion of renewable energy technologies, our team works to connect these assets to electric grid infrastructure to provide critical communications for the local utility and system operator in areas such as offshore wind, solar photovoltaic (PV), hydroelectric power, and battery storage. - Rural Broadband: As engineers, we have a social responsibility to support our communities. Our NIA team works to help our clients provide high-speed internet access to rural communities to advance educational and economic opportunities and help close the digital divide. - Private LTE: We are supporting development of entirely private carrier-grade networks for electric utilities, unlocking new capabilities to monitor and manage the grid and ultimately better serve customers. Private LTE is one application of many within our wireless portfolio. - Fiber: Fiber optic infrastructure is one of the fastest ways that utilities transmit high-bandwidth data, and our team is helping to expand that infrastructure from their core networks all the way to customer homes. - Electric Vehicles: We work with industry leaders and electric utilities to help our customers transition to beneficial and cost-effective transportation electrification. Job Responsibilities + Executes the electrical design of projects from the conceptual phase through design completion. + Research, designs, and compiles project related data as required by the project managers. + Applies knowledge of commonly used electrical concepts, practices, codes, and procedures within the electrical engineering services industry. + Performs field inspections, measurements, or calculations for public and private clients. + Creates project deliverables including but not limited to device configurations, network architecture diagrams, and specifications. + Utilizes innovative tools such as Geographic Information Systems (GIS), 3D scanning, and model-based design. + Modifies and reviews construction drawings and client presentations for a variety of projects primarily related, but not limited, to electric utilities. + Meets and corresponds with clients or outside personnel to develop relationships with key client points of contact. + Performs design quality reviews. + All other duties as assigned. **Qualifications** + Bachelor of Science in Electrical Engineering or related degree from an ABET accredited program. + Or Bachelor of Science in Electrical or related Engineering Technology from an ABET accredited program and successful completion of Fundamentals of Engineering (FE) exam. + Master of Science degree in Electrical Engineering may be substituted for 1 year experience. + 3 years of electrical telecommunications engineering experience, consulting preferred. + Successful completion (i.e.passing) FE or EIT preferred. + Strong knowledge in standard engineering techniques and procedures. + Excellent written and verbal communication skills. + Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrated critical thinking skills. + Proficient in standard engineering techniques and procedures. + Must be capable of applying intensive and diversified knowledge of principles and practices to broad areas of assignments. + Must be capable of devising new approaches to problems encountered. This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled. EEO/Disabled/Veterans **Job** Electrical Engineering **Primary Location** US-MO-Saint Louis **Other Locations** US-OH-Akron, US-OH-Columbus **Schedule:** Full-time **Travel:** Yes, 15 % of the Time **Req ID:** 254292 **Job Hire Type** Experienced #LI-VR #T&D

Burns & McDonnell's Power global practice is seeking to hire an experienced Electrical Engineer in the listed office location. The Power Division focuses on the design and construction of power generation facilities, including fossil, hydrogen, solar, nuclear, and energy storage. Projects also include other types of heavy industrial facilities, such as decarbonization, mining, and gas compression. The project diversity offers a wide range of design and project execution experiences on both multi-discipline and electrical-only projects. Engineered systems include the electrical interconnect to the bulk power grid and all auxiliary electric power equipment in the facility. Equipment includes rotating machines, such as generators and motors, solar photovoltaic panels, inverters, energy storage systems, such as batteries, large power transformers, generator circuit breakers, isolated phase bus duct, non-segregated phase bus duct, switchgear, motor control centers, small power transformers, variable frequency drives, station batteries, and UPS systems. The Electrical Engineer will work on project teams to create world-class designs for both new and retrofit projects on a variety of projects. The Electrical Engineer will work with the project team throughout the design and construction process, adapting electrical plans according to client requirements, industry standards, and budget constraints. Responsibilities to include: + Perform electrical design of projects from the conceptual phase through design completion. + Modify and review production drawings. + Design electrical components for project needs and requirements that are set forth by the project managers. + Apply strong knowledge of commonly used electrical engineering/design concepts, principles, practices, codes, and procedures within the electrical engineering services industry. + Research and compile project related data as required by the project managers. + Efficiently utilize a number of design software tools to perform engineering calculations and physical plant designs. + Compile information for client presentations, shop drawing review, and contract administration. + Perform field inspections, measurements, or calculations in support of project execution. + Act as a field engineer on construction sites. + Perform other duties as assigned. **Qualifications** + Bachelor's degree in electrical engineering or related degree from an ABET accredited program, and 3 years of electrical engineering experience. + OR a bachelor's degree in electrical or related Engineering Technology from an ABET accredited program and successful completion of Fundamentals of Engineering (FE) exam, and 3 years of electrical engineering experience, consulting preferred. + OR a master's degree in electrical engineering and 2 years of electrical engineering experience, consulting preferred. + Strong knowledge in standard engineering techniques and procedures. + Excellent written and verbal communication skills, including team building, collaboration, and organization. + Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrate strong critical thinking skills. + Proficient in standard engineering techniques and procedures. + Strong computer skills include Microsoft Office, AutoCAD, MicroStation, 2D and 3D rendering programs, and other analysis programs. + Engineer in Training (EIT) Certification preferred, Professional Engineer (PE) license encouraged. This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled. EEO/Disabled/Veterans **Job** Electrical Engineering **Primary Location** US-MO-Kansas City **Other Locations** US-MO-Saint Louis, US-AZ-Phoenix, US-TX-Houston, US-NC-Raleigh, US-FL-Orlando, US-NC-Charlotte, US-OH-Columbus **Schedule:** Full-time **Travel:** Yes, 25 % of the Time **Req ID:** 250213 **Job Hire Type** Experienced #LI-DS #PWR

Burns & McDonnell's Power global practice is seeking to hire an experienced Electrical Engineer in the listed office location. The Power Division focuses on the design and construction of power generation facilities, including fossil, hydrogen, solar, nuclear, and energy storage. Projects also include other types of heavy industrial facilities, such as decarbonization, mining, and gas compression. The project diversity offers a wide range of design and project execution experiences on both multi-discipline and electrical-only projects. Engineered systems include the electrical interconnect to the bulk power grid and all auxiliary electric power equipment in the facility. Equipment includes rotating machines, such as generators and motors, solar photovoltaic panels, inverters, energy storage systems, such as batteries, large power transformers, generator circuit breakers, isolated phase bus duct, non-segregated phase bus duct, switchgear, motor control centers, small power transformers, variable frequency drives, station batteries, and UPS systems. As a Senior Lead Electrical Engineer, you will lead project teams to create world-class designs for both new and retrofit projects on a variety of projects. The Electrical Engineer will work with the project team throughout the design and construction process, adapting electrical plans according to client requirements, industry standards, and budget constraints. Responsibilities to include: + Lead electrical design of projects from the conceptual phase through design completion. + Modify and review production drawings. + Design electrical components for project needs and requirements that are set forth by the project managers. + Apply strong knowledge of commonly used electrical engineering/design concepts, principles, practices, codes, and procedures within the electrical engineering services industry. + Research and compile project related data as required by the project managers. + Efficiently utilize a number of design software tools to perform engineering calculations and physical plant designs. + Compile information for client presentations, shop drawing review, and contract administration. + Perform field inspections, measurements, or calculations in support of project execution. + Act as a field engineer on construction sites. + Perform other duties as assigned. **Qualifications** + Bachelor's degree in electrical engineering or related degree from an ABET accredited program. May also have bachelor's degree in electrical or related Engineering Technology from an ABET accredited program and successful completion of Fundamentals of Engineering (FE) exam. A master's degree may substitute for 1 year of experience. + Minimum of 7 years electrical engineering experience. EPC project experience strongly preferred. + Expert knowledge in standard engineering techniques and procedures. Strong knowledge of electrical equipment design ANSI and IEEE Standards. Strong computer skills (e.g. Microsoft Office Suite). + Excellent written and verbal communication skills. + Experience with leading electrical discipline design for large projects and delegating work tasks to team members. Ability to lead execution of work and resolve issues in a team environment. + Demonstrated critical thinking skills, ability to work methodically and analytically in a quantitative problem-solving environment. + Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills. + Ability to perform quality reviews for detailed engineering documents and specifications. + Ability to travel. + Professional Engineer (PE) License Preferred. This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled. EEO/Disabled/Veterans **Job** Electrical Engineering **Primary Location** US-MO-Kansas City **Other Locations** US-MO-Saint Louis, US-AZ-Phoenix, US-TX-Houston, US-NC-Raleigh, US-FL-Orlando, US-NC-Charlotte, US-OH-Columbus **Schedule:** Full-time **Travel:** Yes, 25 % of the Time **Req ID:** 251445 **Job Hire Type** Experienced #LI-DS #PWR

Responsible for substation engineering and consulting services for clients across the US and internationally. Main responsibilities include creating electrical protection & control and/or physical layout design deliverables. Projects range in size, complexity, and voltage class from small distribution facility upgrades to large transmission projects. This position can influence the future of the resiliency, reliability, and economic operation of the electric grid. + Principal responsibilities include the design of high voltage (13kV-500kV) electrical substations. Areas of design and responsibilities include leading and executing the following: + Preparation of proposals and scope development, including conceptual designs and execution plans. + Prepare engineering cost and labor estimates and schedules. + Physical substation design including yard layouts, plans, sections and details, grounding, lightning protection, control building arrangements, interior and exterior raceways, auxiliary AC/DC power systems, and associated bills of material. + Protection and control design including panel arrangements, one lines/single lines, three lines, AC schematics, DC elementaries, equipment wiring and relay panel wiring. + Preparing calculations and reports for engineering studies (grounding, lightning protection, AC/DC load studies, etc.) + Preparing equipment specifications for procurement and/or factory acceptance testing. + Coordinating design activities with other departments (Civil/Structural, Networks, Transmission Line, others.) + Providing guidance and mentoring to less experienced team members. + Regularly meeting with and corresponding with clients or outside personnel. + Performing quality reviews for other engineers and designers. + Providing short term field support during construction. + Supporting business development and marketing initiatives. + Other areas of involvement may include relay settings, 3D/intelligent design, or industry/professional technical committee involvement. + Performing other duties as assigned. **Qualifications** + Bachelor's Degree in Electrical Engineering or related degree from an ABET accredited program and 3 years of electrical engineering experience, consulting preferred. + Bachelor's Degree in Electrical or related Engineering Technology from an ABET accredited program and successful completion of Fundamentals of Engineering (FE) exam and 3 years of electrical engineering experience, consulting preferred. + Master's Degree in Electrical Engineering and 2 years of electrical engineering experience, consulting preferred required. + Strong knowledge in standard engineering techniques and procedures. + Excellent written and verbal communication skills. + Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrated critical thinking skills. + Proficient in standard engineering techniques and procedures. + Strong computer skills. (e.g. Microsoft Office Suite) + Strong computer skills include AutoCAD, MicroStation, 2D and 3D rendering programs and other analysis programs. + Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills. + Engineers in Training-EIT Certification preferred. This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled. EEO/Disabled/Veterans **Job** Electrical Engineering **Primary Location** US-OH-Akron **Other Locations** US-OH-Columbus **Schedule:** Full-time **Travel:** Yes, 25 % of the Time **Req ID:** 250100 **Job Hire Type** Experienced #LI-JNH #T&D

Burns & McDonnell is a company made up of more than 8,000 engineers, architects, construction professionals, scientists, consultants, and entrepreneurs with offices across the country and throughout the world. Burns & McDonnell has exciting opportunities for those interested in growing their careers in one of the most fast paced, innovative sectors of high tech building design and construction. Project focus would be mission-critical data center projects. This opportunity hires directly into our Mission Critical team and into a multibillion-dollar industry that is growing at an exponential rate. Data Centers are an aggressive market for Burns & McDonnell and are highlighted by several priority articles on our site. Mission Critical is an international practice for Burns & McDonnell that involves exciting, collaborative work across many different departments. Burns & McDonnell has exciting opportunities for those interested in growing their careers in one of the most fast paced, innovative sectors of high tech building design and construction. Project focus would be mission-critical data center projects. This opportunity hires directly into our Mission Critical team and into a multibillion-dollar industry that is growing at an exponential rate. Data Centers are an aggressive market for Burns & McDonnell and are highlighted by several priority articles on our site. Mission Critical is an international practice for Burns & McDonnell that involves exciting, collaborative work across many different departments. Specific areas of responsibility include the following: + Designing electrical systems/equipment to provide for a useful and safe workplace. + Advise clients regarding electrical systems/requirements available to meet their needs and comply with safety codes. + Monitor installation of designed equipment/systems to ensure compliance with design specifications and safety codes. + Participate in developing the design criteria for protective device coordination, relay applications, medium voltage transformers, switchgear, medium and low voltage distribution. + Reviews electrical designs and specifications of equipment or systems being purchased or fabricated. + Developing concept studies and design. + Enforces standards and practices. **Qualifications** + Bachelor Degree in Electrical Engineering or related degree from an ABET accredited program. and 3 years of electrical engineering experience, consulting preferred. Required or + Bachelor Degree in Electrical or related Engineering Technology from an ABET accredited program and successful completion of Fundamentals of Engineering (FE) exam. and 3 years of electrical engineering experience, consulting preferred. Required or + Master Degree in Electrical Engineering and 2 years of electrical engineering experience, consulting preferred. Required + Strong knowledge in standard engineering techniques and procedures. + Excellent written and verbal communication skills. + Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrated critical thinking skills. + Proficient in standard engineering techniques and procedures. + Strong computer skills (e.g. Microsoft Office Suite) + Strong computer skills include AutoCAD, MicroStation, 2D and 3D rendering programs and other analysis programs. + Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.Preferred Criteria + Data center or telecommunication facility experience. + Knowledge of critical facility electrical design. + Understanding of NFPA 70, 70E, 75, 101 and other applicable sections. + Ability to write specifications for electrical equipment, devices, and material. + Familiarity with other building systems and coordination with those systems and components. + EIT professional designation with ambition to attain PE license. This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled. EEO/Disabled/Veterans **Job** Electrical Engineering **Primary Location** US-OH-Columbus **Schedule:** Full-time **Travel:** Yes, 25 % of the Time **Req ID:** 233871 **Job Hire Type** Experienced #LI-EH #GFS

Our Engineering Interns are responsible for performing tasks requiring the application of standard engineering techniques and procedures. This includes standard design of engineering systems, correcting and updating designs, assisting lead engineers with various project duties, and other duties as assigned. Specific assignments and project work vary depending on the market segments. Please see below for information on each market: Global Facilities The Global Facilities group is responsible for the planning and design of manufacturing facilities, administrative buildings, district energy systems, data centers, and mission-critical facilities. They work in a variety of industries including food and beverage, consumer products, healthcare, commercial, life sciences, pharmaceutical, and aerospace manufacturing industries. + Assist with tasks that may include filing, scanning, data entry, documentation, Power Point presentation. + Assist with responses to general questions. + Participate in continuous improvement efforts by collecting and analyzing data. + Present solutions to concerns. + Research solutions to project concerns; analyze and recommend solutions to problems. + Assist with ad hoc projects as assigned by managers. + Minimum of a 3.0 GPA strongly preferred. + Involvement on campus or in the community preferred. + Candidates must be legally authorized to work permanently (i.e., without time limitations, without restrictions or without need for work sponsorship) in the country where this position is located. + Performs other duties as assigned + Complies with all policies and standards **Qualifications** + Pursuit of Bachelor's or Master's degree in Electrical Engineering or related degree from an accredited program. + Currently enrolled, and in good standing, in a post-secondary education and/or technical certificate program in a field related to the work done in the department. + Minimum of a 3.0 GPA strongly preferred. + Prior internship and/or related consulting experience preferred. + Actively involved in campus, community or other volunteer activities or organizations. + Excellent verbal and written communication skills. + Strong problem solving and analytical skills. + Basic knowledge and experience in Microsoft Office programs, including, Word, Excel, PowerPoint and Outlook. + Demonstrated leadership skills. + Self-motivated and eager learner, aptitude to grow and develop within the field. + Candidates must be legally authorized to work permanently (i.e., without time limitations, without restrictions or without need for work sponsorship) in the country where this position is located. + Candidates must be legally authorized to work in the United States on a full-time basis without requiring future sponsorship for employment visa status. **Benefits** Interns may participate in our 401(k) retirement program provided plan eligibility requirements are met. Sick leave is accrued based on the actual number of hours worked. For more information, please visit the Benefits & Wellness page. This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled. EEO/Disabled/Veterans **Job** Intern **Primary Location** US-OH-Columbus **Schedule:** Full-time **Travel:** Yes, 5 % of the Time **Req ID:** 253410 **Job Hire Type** Intern #LI-JB #GFS

Our Transmission & Distribution global practice is looking for an Electrical Engineer to support our Saint Louis office. This person will serve as a lead engineer on telecommunications projects. You will have the opportunity at Burns & McDonnell to build your own success story, both personally and professionally. You will be empowered to build your career with a company that supports the creation of infrastructure for the largest and most complex machine humans have ever built, and which literally powers our society. Join our team working on dynamic projects engineering communications and network solutions that are modernizing today's electric grid infrastructure. We want you to bring your unique experiences, talents, and perspectives to our diverse team to make our client projects successful! Networks, Integration & Automation (NIA) Projects As an engineer at Burns & McDonnell, you will be a key part of our nationwide team. Burns & McDonnell will provide you on-the-job training, technical mentorship, and personal development as you support the following projects: - Grid Modernization: Now, more than ever, reliable and secure communication for grid operations is essential. We work with electric utilities to expand their capabilities with the latest technologies for remote monitoring, automation, and control to improve their operational efficiency. - Networks: We help our clients build redundant, long-haul, high-capacity data networks via a variety of technologies that are used for both business/IT needs as well as the day-to-day operational needs that keep the lights on. - Renewable Energy: With the expansion of renewable energy technologies, our team works to connect these assets to electric grid infrastructure to provide critical communications for the local utility and system operator in areas such as offshore wind, solar photovoltaic (PV), hydroelectric power, and battery storage. - Rural Broadband: As engineers, we have a social responsibility to support our communities. Our NIA team works to help our clients provide high-speed internet access to rural communities to advance educational and economic opportunities and help close the digital divide. - Private LTE: We are supporting development of entirely private carrier-grade networks for electric utilities, unlocking new capabilities to monitor and manage the grid and ultimately better serve customers. Private LTE is one application of many within our wireless portfolio. - Fiber: Fiber optic infrastructure is one of the fastest ways that utilities transmit high-bandwidth data, and our team is helping to expand that infrastructure from their core networks all the way to customer homes. - Electric Vehicles: We work with industry leaders and electric utilities to help our customers transition to beneficial and cost-effective transportation electrification. Job Responsibilities + Executes the electrical design of projects from the conceptual phase through design completion. + Research, designs, and compiles project related data as required by the project managers. + Applies knowledge of commonly used electrical concepts, practices, codes, and procedures within the electrical engineering services industry. + Performs field inspections, measurements, or calculations for public and private clients. + Creates project deliverables including but not limited to device configurations, network architecture diagrams, and specifications. + Utilizes innovative tools such as Geographic Information Systems (GIS), 3D scanning, and model-based design. + Modifies and reviews construction drawings and client presentations for a variety of projects primarily related, but not limited, to electric utilities. + Meets and corresponds with clients or outside personnel to develop relationships with key client points of contact. + Performs design quality reviews. + All other duties as assigned. **Qualifications** + Bachelor of Science in Electrical Engineering or related degree from an ABET accredited program. + Or Bachelor of Science in Electrical or related Engineering Technology from an ABET accredited program and successful completion of Fundamentals of Engineering (FE) exam. + Master of Science degree in Electrical Engineering may be substituted for 1 year experience. + 3 years of electrical telecommunications engineering experience, consulting preferred. + Successful completion (i.e.passing) FE or EIT preferred. + Strong knowledge in standard engineering techniques and procedures. + Excellent written and verbal communication skills. + Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrated critical thinking skills. + Proficient in standard engineering techniques and procedures. + Must be capable of applying intensive and diversified knowledge of principles and practices to broad areas of assignments. + Must be capable of devising new approaches to problems encountered. This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled. EEO/Disabled/Veterans **Job** Electrical Engineering **Primary Location** US-MO-Saint Louis **Other Locations** US-OH-Akron, US-OH-Columbus **Schedule:** Full-time **Travel:** Yes, 15 % of the Time **Req ID:** 254292 **Job Hire Type** Experienced #LI-VR #T&D

**Electrical Project Engineer - Substation** Company: Black & Veatch Family of Companies **Together, we own our company, our future, and our shared success.** As an employee-owned company, our people _are_ Black & Veatch. We put them at the center of everything we do and empower them to grow, explore new possibilities and use their diverse talents and perspectives to solve humanity's biggest challenges in an ever-evolving world. With over 100 years of innovation in sustainable infrastructure and our expertise in engineering, procurement, consulting and construction, together we are building a world of difference. **Company :** Black & Veatch Corporation **Req Id :** 111754 **Opportunity Type :** Staff **Relocation eligible :** Yes **Full time/Part time :** Full-Time **Project Only Hire :** No **Visa Sponsorship Available:** No **Why Black and Veatch** Black & Veatch allows you to lend your talent and perspective to humanity's biggest challenges in a flexible environment where you are empowered to grow and explore new possibilities. We offer competitive compensation; 401K match and benefits that start day one. At Black & Veatch, you own your career with purpose and meaning. You are empowered to grow and explore new possibilities at every step of your career journey. Bring your big ideas knowing you are safe to be who you are and speak up with concerns or questions and put your diverse talents and perspectives to use. \#LI-TF1 **The Team** Black & Veatch is **Ranked #4 Overall in Power** by Engineering News-Record (2025). Our Technology, Commercial & Industrial Team has specialized capabilities focused on the latest needs for clients in a fast-growth technology-led arena of advanced manufacturing, and generative AI computing including gigafactories, bio/ag tech, data centers and distributed infrastructure. By joining our market sector, you will have the opportunity to be involved in cutting-edge technology and work with a team that moves quickly with decisions and expectations. Our specialized team provides complete engineering, procurement, and construction new asset and operating asset services in the following areas: + Substations + Renewables Integration + HVDC/FACTS/STATCOM + Datacenters Integration + BESS Integration **The Opportunity** As an Electrical Project Engineer, you may have the opportunity to: + Function as a Technical Specialist or Project Lead Role, providing project coordination, guidance and expertise on assigned substation projects. + Support a variety of substation projects ranging up to 765kV in engineering detailed design and Engineering, Procurement and Construction (EPC). + Develop protection and control design deliverables including protective relays, panel arrangements, one line/single line diagrams, three line diagrams, AC/DC schematics, relay panel wiring and equipment wiring within high voltage substation designs. + Develop physical design deliverables including yard layout plans, grounding, lightning protection, control building arrangements, and auxiliary AC/DC power systems within high voltage substation designs. + Perform or oversee quality review of electrical substation design packages. + Provide guidance and mentorship to junior team members. + Prepare electrical equipment specifications and Bills of Materials (BOM) for procurement and construction. + Communicate and coordinate project activities and activities with clients, vendors, subcontractors and other stakeholders. + Present proposals, designs and project activities. + Potential travel opportunities to client and vendor offices and/or project sites for design reviews, construction coordination and field verification. + Prepare and manage design budgets and schedules. + Provide support to business development or pursuit activities. This opportunity is located in **Seven Hills, OH** (Cleveland). **Key Responsibilities** + Continues developing knowledge and may provide guidance and direction on design guides, standards, systems, applicable engineering codes and B&V policies.Provides technical guidance to others regarding projects and disciplines. + Independently applies knowledge and complies with B&V quality program relative to assigned tasks. May be responsible for ensuring compliance with B&V quality program.Provides related guidance and direction to others. Supports continuous improvement and change management efforts. + Prepares a variety of engineering deliverables for larger or multiple projects. Performs research and develops recommendations for equipment and/or materials selection. May oversee collection, assimilation, and management of data for engineering work. Prepares engineering calculations following standard methods and principles. Prepares and manages assigned budget, schedule, and quality requirements.Independently applies advanced engineering techniques and analysis problems and methods. Actively delegates appropriate tasks to lower level team members to develop depth of project execution staff. Reviews lower level engineering work or assignments. Is responsible for one or more of the following: leading production teams; coordinating multiple discipline activity; and serving as the responsible charge for a project. + Actively coordinates with all other internal/external team members on moderately complex projects. + Responsible for assisting with identification of key client interests and drivers on high voltage substation projects. Communicates client interests and drivers to project team members and develops approaches to accommodate these concerns in the performance of the work on high voltage substation projects. Provides support to business development or pursuit activities and may offer other services to clients. + Recognized as a technical specialist and has knowledge and skill set to provide consultation and guidance to project teams in a particular practice area. May design a complete project or support multiple projects on the complex technical challenges. Actively fosters knowledge management and provides mentoring. May develop and apply advanced engineering concepts and approaches to unique engineering problems + Typically assists with performance management process, mentoring, recognition, and any corrective actions required. May participate in career planning, and learning and development. Actively mentors lower level professionals and identifies successors to train in the specifics of their role. + May assist with resource management strategy. May have responsibility of engineering resources for small groups of a single discipline. May be accountable for some administrative responsibilities that include but aren't limited to: + Ensuring policies, procedures and processes are effectively implemented and communicated for work group. + Ensuring adherence to corporate and division programs. + Approving timesheets and expense reports. **Preferred Qualifications** + High voltage (HV) substation design experience - Physical and/or Protection & Controls + Project lead and technical specialist experience overseeing utility substation clients and projects + QA/QC Reviews - Quality Assurance/Quality Checks + Experience coordinating and communicating with Clients, Multidisciplinary Leads and Project Managers · Professional Engineer (PE) License + Proficient with Bluebeam Revu and Microsoft Office Programs (such as Outlook, Excel, Powerpoint, etc.) **Minimum Qualifications** + Bachelor's Degree in Engineering from either a recognized accredited program in their home country or the country in which the professional is practicing. + Minimum of 5 years related work experience. + All applicants must be able to complete pre-employment onboarding requirements (if selected) which may include any/all of the following: criminal/civil background check, drug screen, and motor vehicle records search, in compliance with any applicable laws and regulations. **Certifications** **Work Environment/Physical Demands** Hybrid or flexible work options may be offered after the first 90 days of employment based upon manager discretion, job performance and work assignments. **Competencies** **Salary Plan** ENG: Engineering **Job Grade** 016 Black & Veatch endeavors to makeaccessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process because of a disability, please contact the Employee Relations Department at *************** or via our. This contact information is for disability accommodation requests only; you may not use this contact information to inquire about the status of applications. General inquiries about the status of applications will not be returned. Black & Veatch is committed to being an employer of choice by creating a valuable work experience that keeps our people engaged, productive, safe and healthy. Our comprehensive benefits portfolio is a key component of this commitment and offers an array of health care benefits including but not limited to medical, dental and vision insurances along with disability and a robust wellness program. To support a healthy work-life balance, we offer flexible work schedules, paid vacation and holiday time, sick time, and dependent sick time. A variety of additional benefits are available to our professionals, including a company-matched 401k plan, adoption reimbursement, tuition reimbursement, vendor discounts, an employment referral program, AD&D insurance, pre-taxed accounts, voluntary legal plan and the B&V Credit Union. Professionals may also be eligible for a performance-based bonus program. We are proud to be a 100 percent ESOP-owned company. As employee-owners, our professionals are empowered to drive not only their personal growth, but the company's long-term achievements - and they share in the financial rewards of the success through stock ownership. By valuing diverse voices and perspectives, we cultivate an authentically inclusive environment for professionals and are able to provide innovative and effective solutions for clients. BVH, Inc., its subsidiaries and its affiliated companies, complies with all Equal Employment Opportunity (EEO) laws and regulations. Black & Veatch does not discriminate on the basis of age, race, religion, color, sex, national origin, marital status, genetic information, sexual orientation, gender Identity and expression, disability, veteran status, pregnancy status or other status protected by law. For our EEO Policy Statement, please click. **Notice to External Search Firms** : Black & Veatch does not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Black & Veatch Talent Acquisition engages with search firms directly for hiring needs. **Job Segment:** Project Engineer, Electrical Engineering, Construction, Manufacturing Engineer, Electrical, Engineering

Responsible for substation engineering and consulting services for clients across the US and internationally. Main responsibilities include creating electrical protection & control and/or physical layout design deliverables. Projects range in size, complexity, and voltage class from small distribution facility upgrades to large transmission projects. This position can influence the future of the resiliency, reliability, and economic operation of the electric grid. + Principal responsibilities include the design of high voltage (13kV-500kV) electrical substations. Areas of design and responsibilities include leading and executing the following: + Preparation of proposals and scope development, including conceptual designs and execution plans. + Prepare engineering cost and labor estimates and schedules. + Physical substation design including yard layouts, plans, sections and details, grounding, lightning protection, control building arrangements, interior and exterior raceways, auxiliary AC/DC power systems, and associated bills of material. + Protection and control design including panel arrangements, one lines/single lines, three lines, AC schematics, DC elementaries, equipment wiring and relay panel wiring. + Preparing calculations and reports for engineering studies (grounding, lightning protection, AC/DC load studies, etc.) + Preparing equipment specifications for procurement and/or factory acceptance testing. + Coordinating design activities with other departments (Civil/Structural, Networks, Transmission Line, others.) + Providing guidance and mentoring to less experienced team members. + Regularly meeting with and corresponding with clients or outside personnel. + Performing quality reviews for other engineers and designers. + Providing short term field support during construction. + Supporting business development and marketing initiatives. + Other areas of involvement may include relay settings, 3D/intelligent design, or industry/professional technical committee involvement. + Performing other duties as assigned. **Qualifications** + Bachelor's Degree in Electrical Engineering or related degree from an ABET accredited program and 3 years of electrical engineering experience, consulting preferred. + Bachelor's Degree in Electrical or related Engineering Technology from an ABET accredited program and successful completion of Fundamentals of Engineering (FE) exam and 3 years of electrical engineering experience, consulting preferred. + Master's Degree in Electrical Engineering and 2 years of electrical engineering experience, consulting preferred required. + Strong knowledge in standard engineering techniques and procedures. + Excellent written and verbal communication skills. + Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrated critical thinking skills. + Proficient in standard engineering techniques and procedures. + Strong computer skills. (e.g. Microsoft Office Suite) + Strong computer skills include AutoCAD, MicroStation, 2D and 3D rendering programs and other analysis programs. + Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills. + Engineers in Training-EIT Certification preferred. This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled. EEO/Disabled/Veterans **Job** Electrical Engineering **Primary Location** US-OH-Akron **Other Locations** US-OH-Columbus **Schedule:** Full-time **Travel:** Yes, 25 % of the Time **Req ID:** 250100 **Job Hire Type** Experienced #LI-JNH #T&D

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world's most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Job Description AECOM is seeking an entry-level Electrical Engineer to be based in the Cleveland, OH, Columbus, OH, and Des Moines, IA offices. This position is expected to begin no later than January 2026. The responsibilities of this position include, but are not limited to: * Conduct all design-related activities under engineering supervision * Prepare engineering calculations, diagrams, sketches, and drawings * Utilize computer software as a tool for designing and solving engineering problems * Perform work in accordance with the allocated budget and schedule * Attend design review meetings, record minutes, and maintain action items * Research and apply related building codes, regulatory and industry standards * Coordinate with multiple disciplines to ensure timely project delivery * Perform surveys, create sketches, record dimensions, and analyze data collected * Perform construction administration tasks, including shop drawing review, site observations, and other requests for information Qualifications Minimum Requirements: * Bachelor's degree in electrical engineering * Due to the nature of the work, U.S. citizenship is required. * Valid U.S. Driver's License. Preferred Qualifications: * Knowledge of Microsoft Office, including PowerPoint, Word, and Excel * Knowledge of AutoCAD and Revit design software * Basic knowledge of electrical components and characteristics * Creative thinker with effective teamwork skills * Strong written and verbal communication skills; articulate, assertive, confident Additional Information * Relocation assistance is not available for this position. * Sponsorship for U.S. employment authorization is not available for this position. * Motor Vehicle Record (MVR) screening required to visit project sites, clients, and other AECOM offices. About AECOM AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options, well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan. AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients' complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle - from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2024. Learn more at aecom.com. What makes AECOM a great place to work You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you'll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you've always envisioned. Here, you'll find a welcoming workplace built on respect, collaboration and community-where you have the freedom to grow in a world of opportunity. As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines.

** **Work with Us. Change the World.** At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world's most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. **Job Description** **AECOM** is seeking an entry-level Electrical Engineer to be based in the Cleveland, OH, Columbus, OH, and Des Moines, IA offices. This position is expected to begin no later than January 2026. **The responsibilities of this position include, but are not limited to:** + Conduct all design-related activities under engineering supervision + Prepare engineering calculations, diagrams, sketches, and drawings + Utilize computer software as a tool for designing and solving engineering problems + Perform work in accordance with the allocated budget and schedule + Attend design review meetings, record minutes, and maintain action items + Research and apply related building codes, regulatory and industry standards + Coordinate with multiple disciplines to ensure timely project delivery + Perform surveys, create sketches, record dimensions, and analyze data collected + Perform construction administration tasks, including shop drawing review, site observations, and other requests for information **Qualifications** **Minimum Requirements:** + Bachelor's degree in electrical engineering + Due to the nature of the work, U.S. citizenship is required. + Valid U.S. Driver's License. **Preferred Qualifications:** + Knowledge of Microsoft Office, including PowerPoint, Word, and Excel + Knowledge of AutoCAD and Revit design software + Basic knowledge of electrical components and characteristics + Creative thinker with effective teamwork skills + Strong written and verbal communication skills; articulate, assertive, confident **Additional Information** + Relocation assistance is not available for this position. + Sponsorship for U.S. employment authorization is not available for this position. + Motor Vehicle Record (MVR) screening required to visit project sites, clients, and other AECOM offices. **About AECOM** AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options, well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan. AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients' complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle - from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2024. Learn more at aecom.com. **What makes AECOM a great place to work** You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you'll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you've always envisioned. Here, you'll find a welcoming workplace built on respect, collaboration and community-where you have the freedom to grow in a world of opportunity. As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines. **ReqID:** J10136687 **Business Line:** B&P - Buildings & Places **Business Group:** DCS **Strategic Business Unit:** West **Career Area:** Engineering **Work Location Model:** Hybrid

Title: RF Engineer Project Specialist (Remote) Belong, Connect, Grow, with KBR! KBR is committed to delivering innovative and reliable engineering solutions that uphold our core values of Zero Harm, Integrity, and Teamwork. As part of our Specialty Engineering team, we drive excellence in RFID system deployment across government and commercial sectors, fostering a culture of continuous improvement and operational success. Job Summary The Sr. Technical Professional - Specialty Engineering (RF Engineering Project Specialist) is responsible for leading the planning, coordination, and execution of complex RFID installation projects. This role ensures seamless integration of technical solutions, manages multidisciplinary teams, and maintains high standards of quality, safety, and customer satisfaction throughout the project lifecycle. Roles and Responsibilities Project Planning & Execution: Develop and manage detailed project plans; oversee antenna and network infrastructure installation; coordinate engineering, IT, and field teams. Technical Integration & Problem Solving: Lead troubleshooting efforts to resolve technical challenges during system implementation. Business Development Support: Assist in proposal development by creating bases of estimate, materials, and direct costs. Marketing Collaboration: Contribute to marketing materials that highlight technical capabilities and support business growth. Dispatch Process Execution: Manage personnel and resource deployment for each project phase. Quality Assurance & Team Integrity: Promote system quality and team accountability. Resource Strategy: Define staffing and material strategies to optimize project outcomes. Technical Analysis: Conduct performance validation and recommend engineering improvements. Technical Documentation: Prepare specifications, test plans, and reports to support compliance and project phases. Project Management: Lead or support small-scale projects, ensuring milestone achievement and quality standards. Teamwork: Collaborate with stakeholders to define requirements and resolve technical issues. Technical Knowledge Sharing: Mentor junior team members and foster technical growth. Basic Qualifications Bachelor's degree in Electrical Engineering, Physics, or a related technical field. Minimum of 5 years of experience in RFID, wireless communications, RF systems, RF propagation, or signal processing. Demonstrated expertise in RF engineering and problem-solving. Strong communication skills and experience in technical documentation. Proven ability to work across multidisciplinary teams and lead project planning and integration efforts. US citizenship is a requirement. Preferred Qualifications Master's degree in Electrical Engineering, Physics, or related field. Active U.S. Government issued Secret Security Clearance. PMP or similar project management certification. Previous leadership and research experience in RF systems or specialty engineering. KBR Benefits KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development. Belong, Connect and Grow at KBR At KBR, we are passionate about our people and our Zero Harm culture. These inform all that we do and are at the heart of our commitment to, and ongoing journey toward being a People First company. That commitment is central to our team of team's philosophy and fosters an environment where everyone can Belong, Connect and Grow. We Deliver - Together. KBR is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law.

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world's most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Job Description AECOM is seeking an entry-level Electrical Engineer to be based in the Cleveland, OH, Columbus, OH, and Des Moines, IA offices. This position is expected to begin no later than January 2026. The responsibilities of this position include, but are not limited to: Conduct all design-related activities under engineering supervision Prepare engineering calculations, diagrams, sketches, and drawings Utilize computer software as a tool for designing and solving engineering problems Perform work in accordance with the allocated budget and schedule Attend design review meetings, record minutes, and maintain action items Research and apply related building codes, regulatory and industry standards Coordinate with multiple disciplines to ensure timely project delivery Perform surveys, create sketches, record dimensions, and analyze data collected Perform construction administration tasks, including shop drawing review, site observations, and other requests for information Qualifications Minimum Requirements: Bachelor's degree in electrical engineering Due to the nature of the work, U.S. citizenship is required. Valid U.S. Driver's License. Preferred Qualifications: Knowledge of Microsoft Office, including PowerPoint, Word, and Excel Knowledge of AutoCAD and Revit design software Basic knowledge of electrical components and characteristics Creative thinker with effective teamwork skills Strong written and verbal communication skills; articulate, assertive, confident Additional Information Relocation assistance is not available for this position. Sponsorship for U.S. employment authorization is not available for this position. Motor Vehicle Record (MVR) screening required to visit project sites, clients, and other AECOM offices. About AECOM AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options, well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan. AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients' complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle - from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2024. Learn more at aecom.com. What makes AECOM a great place to work You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you'll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you've always envisioned. Here, you'll find a welcoming workplace built on respect, collaboration and community-where you have the freedom to grow in a world of opportunity. As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines.

** **Work with Us. Change the World.** At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world's most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. **Job Description** **AECOM** is seeking an entry-level Electrical Engineer to be based in the Cleveland, OH, Columbus, OH, and Des Moines, IA offices. This position is expected to begin no later than January 2026. **The responsibilities of this position include, but are not limited to:** + Conduct all design-related activities under engineering supervision + Prepare engineering calculations, diagrams, sketches, and drawings + Utilize computer software as a tool for designing and solving engineering problems + Perform work in accordance with the allocated budget and schedule + Attend design review meetings, record minutes, and maintain action items + Research and apply related building codes, regulatory and industry standards + Coordinate with multiple disciplines to ensure timely project delivery + Perform surveys, create sketches, record dimensions, and analyze data collected + Perform construction administration tasks, including shop drawing review, site observations, and other requests for information **Qualifications** **Minimum Requirements:** + Bachelor's degree in electrical engineering + Due to the nature of the work, U.S. citizenship is required. + Valid U.S. Driver's License. **Preferred Qualifications:** + Knowledge of Microsoft Office, including PowerPoint, Word, and Excel + Knowledge of AutoCAD and Revit design software + Basic knowledge of electrical components and characteristics + Creative thinker with effective teamwork skills + Strong written and verbal communication skills; articulate, assertive, confident **Additional Information** + Relocation assistance is not available for this position. + Sponsorship for U.S. employment authorization is not available for this position. + Motor Vehicle Record (MVR) screening required to visit project sites, clients, and other AECOM offices. **About AECOM** AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options, well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan. AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients' complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle - from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2024. Learn more at aecom.com. **What makes AECOM a great place to work** You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you'll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you've always envisioned. Here, you'll find a welcoming workplace built on respect, collaboration and community-where you have the freedom to grow in a world of opportunity. As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines. **ReqID:** J10136687 **Business Line:** B&P - Buildings & Places **Business Group:** DCS **Strategic Business Unit:** West **Career Area:** Engineering **Work Location Model:** Hybrid

**Requisition ID:** 174775 **Job Level:** Mid Level **Home District/Group:** Kiewit Power Engineering **Department:** Design Engineering **Market:** Power **Employment Type:** Full Time We are currently looking for motivated Substation Designer/Drafter to join our growing Substation and Transmission Line Design team. As part of the team of highly specialist design professional, you will support variety of substation, transmission and distribution project ranging from 12kv to 500kV. We are supporting both engineering design and EPC projects for clients throughout the country. **Location** This position is based out of our office in Columbus, OH. **Responsibilities** - Work with Engineers and Designer to develop the design documents and drawings for Substation or Transmission Line project. - Create design/construction drawing package for substation design project including substation general plan, elevation and detail, bill of material, conduit and cable schedule. - Provide drafting support for various type of substation project including physical, electrical and protection and control design. - Utilize company standards, client standards, and/or Engineering direction to produce new drawings and update existing drawings utilizing AutoCAD, Microstation or PLS-C ADD - Maintain document management system with quality data. - Train, develop and mentor the less-experienced design team members - Perform quality control checks and provide feedback to team members **Qualifications** - At least 5 years' experience in design and/or drafting disciplines with a background in electrical substation, civil /structural or transmission line design - Minimum GED Diploma with drafting or electrical design training. Bachelor's degree in Drafting/Design preferred - Extensive knowledge of AutoCAD or Microstation - Ability to work in a growing, adaptive and multi-discipline team environment - Ability to work independently with limited direction and oversight - Legally able to work within the United States for any length of time - Strong written and verbal communication skills; fluent in English language Other Requirements: + Regular, reliable attendance + Work productively and meet deadlines timely + Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment. + Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. + Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. + May work at various different locations and conditions may vary. We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. Equal Opportunity Employer, including disability and protected veteran status. Company: Kiewit

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world's most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Job Description AECOM is seeking an Electrical Engineering Intern to be based in Cleveland, OH. This position is expected to begin in Spring/Summer 2026. Internships at AECOM offer students in undergraduate and graduate programs the opportunity to gain valuable hands-on experience in engineering, design, and infrastructure projects that make a real-world impact. Interns work with cutting-edge technology, learn industry best practices, and collaborate with experienced professionals in a globally recognized firm. The program fosters both technical and professional skill development while providing networking opportunities that can enhance future career prospects. Additionally, AECOM's dedication to innovation and sustainability enables interns to contribute to meaningful projects that help shape communities and the built environment. The responsibilities of this position include, but are not limited to: * Build analytic and design skills. * Conduct engineering design under the supervision of an experienced engineer. * Create designs, calculations, sketches, diagrams, schematic drawings, and final working drawings under the supervision of an experienced engineer. * Collect and analyze data, including field surveys, under the supervision of an experienced engineer. * Use computer software as a tool for solving basic engineering problems. * Perform work in accordance with agreed-upon budget and schedule under an experienced engineer. Qualifications Minimum Requirements: * Candidates must be pursuing a bachelor's degree in Electrical Engineering, Architectural Engineering, or a related field and must have completed at least three years of study. Candidates who have recently graduated with a bachelor's degree and plan to continue with a master's degree are eligible to apply for these positions. Recent graduates must have been enrolled in their bachelor's degree in the most previous school term with an interest in pursuing an advanced degree in the same or similar discipline at the conclusion of the internship. * Due to the nature of the work, U.S. Citizenship is required. Preferred Qualifications: * Proficient in Microsoft Office programs. * Effective written and oral communication skills. * Prior internship experience utilizing drafting, surveying, and/or construction administration skills. * Experience with Revit and/or AutoCAD, electrical simulation software (SKM, ETAP, etc.), or lighting calculation programs (AGi32). Additional Information * Relocation assistance is not available for this position. * Sponsorship is not available for this position. * This position requires a hybrid work schedule, which includes office work in Cleveland, OH. The selected candidate must be available to work in Cleveland, OH. About AECOM AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options, well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan. AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients' complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle - from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2024. Learn more at aecom.com. What makes AECOM a great place to work You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you'll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you've always envisioned. Here, you'll find a welcoming workplace built on respect, collaboration and community-where you have the freedom to grow in a world of opportunity. As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines.

** **Work with Us. Change the World.** At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world's most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. **Job Description** **AECOM** is seeking an Electrical Engineering Intern to be based in Cleveland, OH. This position is expected to begin in Spring/Summer 2026. Internships at AECOM offer students in undergraduate and graduate programs the opportunity to gain valuable hands-on experience in engineering, design, and infrastructure projects that make a real-world impact. Interns work with cutting-edge technology, learn industry best practices, and collaborate with experienced professionals in a globally recognized firm. The program fosters both technical and professional skill development while providing networking opportunities that can enhance future career prospects. Additionally, AECOM's dedication to innovation and sustainability enables interns to contribute to meaningful projects that help shape communities and the built environment. **The responsibilities of this position include, but are not limited to:** + Build analytic and design skills. + Conduct engineering design under the supervision of an experienced engineer. + Create designs, calculations, sketches, diagrams, schematic drawings, and final working drawings under the supervision of an experienced engineer. + Collect and analyze data, including field surveys, under the supervision of an experienced engineer. + Use computer software as a tool for solving basic engineering problems. + Perform work in accordance with agreed-upon budget and schedule under an experienced engineer. **Qualifications** **Minimum Requirements:** + Candidates must be pursuing a bachelor's degree in Electrical Engineering, Architectural Engineering, or a related field and must have completed at least **three years** of study. Candidates who have recently graduated with a bachelor's degree and plan to continue with a master's degree are eligible to apply for these positions. Recent graduates must have been enrolled in their bachelor's degree in the most previous school term with an interest in pursuing an advanced degree in the same or similar discipline at the conclusion of the internship. + Due to the nature of the work, U.S. Citizenship is required. **Preferred Qualifications:** + Proficient in Microsoft Office programs. + Effective written and oral communication skills. + Prior internship experience utilizing drafting, surveying, and/or construction administration skills. + Experience with Revit and/or AutoCAD, electrical simulation software (SKM, ETAP, etc.), or lighting calculation programs (AGi32). **Additional Information** + Relocation assistance is not available for this position. + Sponsorship is not available for this position. + This position requires a hybrid work schedule, which includes office work in Cleveland, OH. The selected candidate must be available to work in Cleveland, OH. **About AECOM** AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options, well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan. AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients' complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle - from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2024. Learn more at aecom.com. **What makes AECOM a great place to work** You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you'll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you've always envisioned. Here, you'll find a welcoming workplace built on respect, collaboration and community-where you have the freedom to grow in a world of opportunity. As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines. **ReqID:** J10138344 **Business Line:** B&P - Buildings & Places **Business Group:** DCS **Strategic Business Unit:** West **Career Area:** Engineering **Work Location Model:** Hybrid

Title: Project Engineer Under general supervision, solves complex problems requiring detailed knowledge of field and industry best practices in engineering and project management. Uses experience and problem-solving skills to develop and improve processes. Displays core competencies by analyzing possible solutions using standard procedures. Performs assignments requiring experience and knowledge of standard concepts within engineering and design. This position is located at a client site in Dayton, OH. Work will be performed on site, with schedule flexibility for remote work opportunities. Responsibilities Responsible for technical leadership of a project, typically up to $500K, within the programmatic guidelines set by the program manager and customer. Defines, generates, and reviews project requirements documentation. Performs technical studies to refine project requirements. Monitors project to ensure work scope, schedule, and budget are well defined and maintained. Provides the coordination between resource managers/supervisors and ensures all necessary reviews and approvals are received. May conduct performance/project analyses during phase-down to benefit future/other projects/missions/programs. Incumbents have experience as engineers before moving into this project role Performs routine assignments in the entry level to a professional job progression. Develops competence by performing structured work assignments. Uses existing procedures to solve routine or standard problems. Receives instruction, guidance and direction from others. Requires conceptual knowledge of theories, practices and procedures within a discipline. Applies general knowledge of industry developed through education or past experience. No mentoring or advisory responsibilities; accountable for developing own technical contribution. Uses existing procedures to solve standard problems; analyzes information and standard practices to make judgments. Requirements/Qualifications Bachelor's Degree in Engineering required; Mechanical, Chemical or Electrical Engineering discipline preferred 2-5 years project engineering experience required. Small project cost control and support preferred. Must be proficient in Excel and other Microsoft office products Strong business and analytical acumen. Advanced interpersonal and communication skills to achieve results in interdisciplinary environment. Physical Qualifications Work is located at a working client site: Requires exposure to ambient temperature extremes Extensive walking in and around a construction site, climbing ladders, climbing scaffolding, working on elevated platforms, working on uneven surfaces and working in small or confined spaces. Some lifting may be required, up to 20lbs Must have the ability to walk into and out of the project (enter/egress). Must be able to use appropriate standard issued Personal Protection Equipment (PPE) required for each assigned task (i.e. harness, life vest, lift buckets, hearing and eye protection, steel-toed boots, etc.) Day-to-day physical requirements involve standard office activities including sitting/standing for extended periods of time, attending meetings, use of keyboard and mouse repetitively BENEFITS KBR offers a selection of competitive lifestyle benefits, which could include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development. Belong, Connect and Grow at KBR At KBR, we are passionate about our people and our Zero Harm culture. These inform all that we do and are at the heart of our commitment to, and ongoing journey toward being a People First company. That commitment is central to our team of team's philosophy and fosters an environment where everyone can Belong, Connect and Grow. We Deliver - Together. KBR is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law.