Equipment Operator jobs at Koch Industries

Job Description: This position will help Markit! execute various logging projects and be responsible for assisting in the proper maintenance, preparation and operation of all tools and equipment including hand tools, chainsaws, chippers, and heavy machinery. This position will report to and work closely with the Project Foreman and Superintendent. Location: Projects may be located throughout the State of California and surrounding states. Travel: 50-75% but may be up to 100% depending on the project assignment. Lodging and per diem provided as well as adequate time off for rest. Duties & Responsibilities: Operate Markit!'s logging forestry equipment (e.g. Skidder, Feller Buncher, Log Loader, Harvester, Delimber, Processor, Tracked Skidder, Dozer, water truck) as appropriate for each project. Perform chainsaw felling operations, including directional felling, limbing, and bucking. Manage slash operations, including lop-and-scatter, chipping, and hauling. Perform road work, excavation, lifting work, site clean-up, etc. Control erosion by contour felling and LEB creation and installation. Responsible for completing and submitting proper daily inspections and maintenance on assigned machine(s), requesting any necessary repairs/maintenance from the Fleet Department. Adhere to Markit!'s safety standards and promote safety culture among crew members, including the proper use of machinery and equipment and resolve problems when they arise. Participate in weekly job site maintenance training conducted by the Foreman. Perform equipment repairs/maintenance. Prepare to spend multiple overnights at project sites, as necessary. General forestry labor, as necessary and appropriate. Requirements: 1- 3 years of experience in operating heavy machinery, logging industry preferred. 18 years of age or older. Must possess a valid driver's license and a clean driving record. Must pass pre-employment background check. Ability to work in a team and independently. Excellent communication skills. Have the ability and desire to perform strenuous outdoor work on rough terrain in a variety of inclement weather conditions. Quick and able learner with strong leadership skills and a keen eye for details and good decision-making and problem-solving skills. Ability to work under pressure and stress and handle emergency situations. Effectively complete work projects on time. Ability to utilize safety procedures. Physical ability to bend, squat and lift up to 50 pounds. Technical skills and ability to use a smart phone and/or tablet. Must have reliable transportation to, from and while working on the job site. Language: English required. Bi-lingual (English/Spanish) is a plus. Benefits: Annual reviews. Annual boot allowance. Health insurance including medical, dental and vision. Supplementary insurance including life, short and long term insurance. Paid holidays, vacation and personal time. Retirement with company match. Company provided training for career advancement. Compensation: $26.00 - 40.00 hourly, dependent on qualifications and experience. Markit! Forestry is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or status as a protected veteran. Powered by JazzHR ze3b4IVKJk

TrinityRail Maintenance Services, Inc is searching for a talented team player to fill the open roles of Mobile Equipment Operator - 1st & 2nd shift at our Shell Rock, IA facility. As a Mobile Equipment Operator at Trinity, you'll operate mobile equipment such as lift trucks, overhead cranes, track mobiles/switch engine, and/or yard vehicles in order to move material and products between work stations and/or receiving and storage locations. You'll also ensure proper identification of parts and materials. What you'll do: * Operate a lift truck with over 15,000 pound capacity * Operate overhead crane (stationary) and certified (move across plant) * Operate mobile crane (move across yard) * Operate or act as ground crew for track mobile and/or switch engine * Operate scissor lift * Follow all safety rules and practices * May be involved in safety committees or initiatives * Perform other duties assigned What you'll need: * Minimum of 1 year of experience * Certified to operate overhead crane * May be certified to operate a scissor lift * May be certified to operate a track mobile or switch engine

Finish Dozer Operator/Earthwork Crew We are seeking an experienced Finish Dozer Operator to join our team in Jacksonville, FL. The ideal candidate will have experience working on an Earthwork crew and underground utilities and be proficient in operating a Dozer machine *DO NOT APPLY if you don't have any experience* Responsibilities: Take action to avoid potential hazards and obstructions, such as utility lines, other equipment, other workers, and falling objects. Operate dozers equipped with GPS technology or finish dozers with precision, following project plans and specifications for grading and leveling. Able to perform equipment inspections i.e. checking all fluid levels, visually inspecting equipment, start engines, move throttles, switches and levers. Align Machine with reference stakes and guidelines or ground or position equipment, following hand signals of other workers Load and move dirt, rocks, equipment, and materials using trucks, crawler tractors, shovels, graders, or related equipment Coordinate machine actions with other activities, positioning or moving loads in response to hand or audio signals from crew members Fully understand linework and surface construction in a GPS bulldozer, able to “Freehand” operate as well, follow safety regulations and perform other duties as assigned. Requirements: Must have a minimum of 2 years experience running, maneuvering, driving, and navigating equipment. Must have previous GPS Dozer experience. Must have experience achieving finish grade, cut swalls, grade pond slopes. Essential Functions of the Job: Working hours are 7:00 am till 5:30 pm Monday through Friday (subject to change due to project demands, weather, etc.), with a 30-minute lunch break. Must be willing to work overtime, standby, and some weekends. The job may entail heavy physical labor, which requires strength and agility. Frequently lift and/or move up to 50 lbs. and occasionally lift and/or move more than 100 lbs. You may be required to climb, kneel, crouch, twist, lift, carry, drag, balance, push, and/or pull. All projects are outdoors, in all weather and temperature extremes, and regularly exposed to moving mechanical parts. Occasionally, the noise level in the work environment is loud. Safety equipment, or PPE, is always required, such as hard hats, safety vest, safety glasses, appropriate footwear, and seat belts. (A back support brace can be issued upon request) Must have good manual dexterity, hand-eye coordination, and balance. Must be able to read and understand warning signs and labels on a construction site and interpret plans, drawings, written instructions, and specifications. Must be capable of working as a member of a team Minimum Requirements: Proof of work eligibility Transportation to and from the Job Site Required to pass Pre-Employment Drug Test Required to pass Background Check Must have a clean driving record Benefits: Health, Dental, and Vision Plans after 60 days of employment 401K with matching contributions after 60 days of employment Paid Time off and Holiday after 90 days of employment Disability and Life Insurance after 60 days of employment If you meet the above requirements and are interested in this exciting opportunity, please submit your resume for consideration.

Inspired by the sweeping views of the Santa Catalinas and the rich history of golf, this artful blend of natural beauty and recreation is elevated to a new level of discovery. The Omni Tucson National Resort & Spa has it all - from its picturesque setting in the foothills of Tucson's Santa Catalina Mountains to the lush fairways of its 36-hole championship and desert-style golf courses. The Omni Tucson National Resort & Spa's associates enjoy a dynamic and exciting work environment, comprehensive training and mentoring, along with the pride that comes from working for a company with a reputation for exceptional service. We embody a culture of respect, gratitude and empowerment day in and day out. If you are a friendly, motivated person, with a passion to serve others, the Omni Tucson National Resort & Spa may be your perfect match. Job Description Responsible for ensuring the golf course is well maintained and reflects an image of outstanding quality. The successful candidate must have the ability to operate utility vehicles as well as some small hand tools in the execution of job tasks including bunker maintenance, hand trimming, edging, walk mowing and the use of some riding mowers. Job task assignments will at times extend outside these parameters. Responsibilities Demonstrate preparation for day's work by arriving in uniform and with a positive attitude. Understand daily job assignment chart and how your assignment relates to that day's play. Recognize the various equipment applications so as to make the proper selection for that job assignment Demonstrate a basic knowledge of the game of golf, its rules, and expected playing conditions. Demonstrate the capability to function as a member of a team to accomplish established goals. Carry out all golf course maintenance tasks with a sense of pride and ownership so as to adhere to established quality guidelines for daily course conditioning. Inspect all tools and equipment prior to, during and after use. Operate all equipment safely and with care and consideration of its value. Report any damage and or lack of performance to a supervisor. Also demonstrate an understanding of the work order system for equipment repair and maintenance. Have a thorough understanding of Omni Hotel rules and regulations as outlined in the Omni Hotels employee handbook. Qualifications Previous experience is preferred. Must be able to work outdoors in various weather extremes Must be able to operate and work around hazardous equipment including but not limited to hand tools, trimming tools, mowing equipment, transportation vehicles. Must be able to work weekdays and weekends as necessary Omni Hotels & Resorts is an equal opportunity employer - vets/disability. The EEO is the Law poster and its supplement are available using the following links: EEOC is the Law Poster and the following link is the OFCCP's Pay Transparency Nondiscrimination policy statement If you are interested in applying for employment with Omni Hotels & Resorts and need special assistance to apply for a posted position, please send an email to applicationassistance@omnihotels.com.

Wieland - Creating Value for Generations! Wieland is a global leader in copper and copper alloy manufacturing, processing, and distribution. We provide a large product and service portfolio including power, automotive, ammunition, coinage, construction materials, refrigeration, electronics and many other industries. To us, metal is more than material. Wieland's Cultural Values Wieland's culture is what makes for a fun and rewarding place to work! As a company, we benefit daily from our employees' knowledge and abilities. With our cultural vision, we place our core values at the heart of everything we do: safety, ambition, optimism, reliability, ownership, diversity, & respect. Wieland is hiring a Assembler/Equipment Operator. The Assembler/Equipment Operator will be responsible for ensuring that components are machined and finished as specified by the detailed drawings and procedures of the company, while meeting the defined quality standards. We are seeking a flexible individual who can manage varying job duties from day to day. This role is located in Delaware, OH and will be fully on-site. Starting Pay: $21.00 per hour plus $0.75 shift differential Schedule: 2nd shift Monday - Thursday (4:00pm - 2:30am) Training will be on 1st Shift (2-4 weeks) Monday - Thursday 6:00am-4:30pm Pay Schedule: Biweekly Responsibilities Assembler/Equipment Operator Responsibilities: Follow production orders, company procedures and directions from supervisor, prepare parts and assemble components into assemblies. Successfully perform assembly operations by means of power tools or specialized equipment to produce pressure vessels and heat exchangers. Prepare parts for assembly by means of grinding, blasting, cutting of metals, etc. Execute assembly in accordance to company`s procedures and documents, while meeting defined quality and safety standards. Maintain equipment in proper functioning status by applying preventative maintenance as per instructions. Propose new methods, procedures, or equipment to improve efficiency and/or quality. Assembler/Equipment Operator Qualifications: High School Diploma or GED Required. Ability to perform physical labor for extended periods of time. Ability to regularly lift and move items up to 50 pounds. Ability to use standard hand and power tools such as drills, grinders, etc. Proactive in proposing solutions. Good verbal communication skills. Ability to understand fractions, decimals, and measurement techniques. Qualifications Joining Wieland's team gives you… Benefits - Including Medical, Dental, Vision, Disability, Life & more! Retirement Savings - 401(k) contribution + match. Work/Life Balance - Paid Vacation & Holidays. Growth Opportunities - We have over 9,000+ employees worldwide and 40+ locations in North America alone. Growth opportunities are limitless! Wellness Programs - Wieland encourages participation in our unique and personalized approach to wellness, where you are eligible to earn healthcare premium discounts as well as HSA employer contributions based on your status within the program. Sustainability- Wieland continues to break ground with eco-friendly solutions and push the barrier in sustainability for future generations. Wieland is an equal opportunity and affirmative action employer. We celebrate diversity and are committed to fostering an inclusive environment for all employees. Come join Wieland today and help us continue to build a global corporation we are all proud to belong to.

Job Description: This position will help Markit! execute various forestry projects and be responsible for assisting in the proper maintenance, preparation and operation of all tools and equipment including hand tools, chainsaws, chippers, and heavy machinery. This position will report to and work closely with Project Foremen and Superintendent. Location: Projects may be located throughout the State of Arizona and surrounding states. Travel: 50-75% but may be up to 100% depending on the project assignment. Lodging and per diem provided as well as adequate time off for rest. Duties & Responsibilities: Operate Markit!'s heavy forestry equipment (e.g. Skidder, Feller Buncher, Log Loader, Harvester, Delimber, Masticator, Tracked Skidder, Dozer, Excavator, Chipper) as appropriate for each project. Perform chainsaw felling operations, including directional felling, limbing, and bucking. Manage slash operations, including lop-and-scatter, chipping, and hauling. Perform road work, excavation, lifting work, site clean-up, etc. Control erosion by contour felling and LEB creation and installation. Responsible for completing and submitting proper daily inspections and maintenance on assigned machine(s), requesting any necessary repairs/maintenance from the Fleet Department. Adhere to Markit!'s safety standards and promote safety culture among crew members, including the proper use of machinery and equipment and resolve problems when they arise. Participate in weekly job site maintenance training conducted by the Foreman. Perform equipment repairs/maintenance. Prepare to spend multiple overnights at project sites, as necessary. General forestry labor, as necessary and appropriate. Requirements: 1- 3 years of experience in operating heavy machinery, forestry industry preferred. 18 years of age or older. Must possess a valid driver's license and a clean driving record. Must pass pre-employment background check. Ability to work in a team and independently. Excellent communication skills. Have the ability and desire to perform strenuous outdoor work on rough terrain in a variety of inclement weather conditions. Quick and able learner with strong leadership skills and a keen eye for details and good decision-making and problem-solving skills. Ability to work under pressure and stress and handle emergency situations. Effectively complete work projects on time. Ability to utilize safety procedures. Physical ability to bend, squat and lift up to 50 pounds. Technical skills and ability to use a smart phone and/or tablet. Must have reliable transportation to, from and while working on the job site. Reliable transportation to and from work. Language: English required. Bi-lingual (English/Spanish) is a plus. Job Type: Full-time, year-round work with minimal down days. Benefits: Competitive wages. Annual reviews. Health insurance including medical, dental and vision. Supplementary insurance including life, short and long term insurance. Paid holidays, vacation and personal time. Retirement with company match. Company provided training for career advancement. Markit! Forestry is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or status as a protected veteran. Powered by JazzHR QtkqZAGKTU

Job Description: This position will help Markit! execute various forestry projects and be responsible for assisting in the proper maintenance, preparation and operation of all tools and equipment including hand tools, chainsaws, chippers, and heavy machinery. This position will report to and work closely with Project Foremen and Superintendent. Location: Projects may be located throughout the State of Arizona and surrounding states. Travel: 50-75% but may be up to 100% depending on the project assignment. Lodging and per diem provided as well as adequate time off for rest. Duties & Responsibilities: Operate Markit!'s heavy forestry equipment (e.g. Skidder, Feller Buncher, Log Loader, Harvester, Delimber, Masticator, Tracked Skidder, Dozer, Excavator, Chipper) as appropriate for each project. Perform chainsaw felling operations, including directional felling, limbing, and bucking. Manage slash operations, including lop-and-scatter, chipping, and hauling. Perform road work, excavation, lifting work, site clean-up, etc. Control erosion by contour felling and LEB creation and installation. Responsible for completing and submitting proper daily inspections and maintenance on assigned machine(s), requesting any necessary repairs/maintenance from the Fleet Department. Adhere to Markit!'s safety standards and promote safety culture among crew members, including the proper use of machinery and equipment and resolve problems when they arise. Participate in weekly job site maintenance training conducted by the Foreman. Perform equipment repairs/maintenance. Prepare to spend multiple overnights at project sites, as necessary. General forestry labor, as necessary and appropriate. Requirements: 1- 3 years of experience in operating heavy machinery, forestry industry preferred. 18 years of age or older. Must possess a valid driver's license and a clean driving record. Must pass pre-employment background check. Ability to work in a team and independently. Excellent communication skills. Have the ability and desire to perform strenuous outdoor work on rough terrain in a variety of inclement weather conditions. Quick and able learner with strong leadership skills and a keen eye for details and good decision-making and problem-solving skills. Ability to work under pressure and stress and handle emergency situations. Effectively complete work projects on time. Ability to utilize safety procedures. Physical ability to bend, squat and lift up to 50 pounds. Technical skills and ability to use a smart phone and/or tablet. Must have reliable transportation to, from and while working on the job site. Reliable transportation to and from work. Language: English required. Bi-lingual (English/Spanish) is a plus. Job Type: Full-time, year-round work with minimal down days. Benefits: Competitive wages. Annual reviews. Health insurance including medical, dental and vision. Supplementary insurance including life, short and long term insurance. Paid holidays, vacation and personal time. Retirement with company match. Company provided training for career advancement. Markit! Forestry is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or status as a protected veteran.

Job Type: Full-Time Pay: $18 - $20 per hour (DOE) Daily Per Diem (when traveling): $55 Schedule: 10-12 hour shifts, 6 days per week Start time: 7:00 AM Job Description: We are hiring two Excavator Operators to join our team. Candidates will operate excavators equipped with a Vacuum Excavator Attachment. On-site training will be provided, and upon completion, operators must be available to travel nationwide for project assignments. Key Responsibilities: Safely operate excavators and the Vacuum Excavator Attachment during project assignments Follow all site-specific safety procedures and company policies Conduct basic equipment inspections and perform routine maintenance checks Assist with setup, operation, and breakdown of equipment on job sites Collaborate with crew members and supervisors to ensure project completion Travel to multiple sites across the U.S. as assigned Qualifications: Previous experience operating excavators Ability to learn and adapt to specialized attachments (training provided) Strong safety awareness and commitment to safe work practices Willingness and ability to travel nationwide for extended periods Ability to work long shifts (10-12 hours), 6 days per week Reliable transportation to report to training site and departure points Compensation & Benefits: Competitive hourly pay (DOE) Daily Per Diem (when traveling): $55 Paid training provided Travel across the U.S. included If you're a skilled operator looking for steady work, paid training, and nationwide travel opportunities, we encourage you to apply today!

Job Description: This position will help Markit! execute various logging projects and be responsible for assisting in the proper maintenance, preparation and operation of all tools and equipment including hand tools, chainsaws, chippers, and heavy machinery. This position will report to and work closely with the Project Foreman and Superintendent. Location: Projects may be located throughout the State of California and surrounding states. Travel: 50-75% but may be up to 100% depending on the project assignment. Lodging and per diem provided as well as adequate time off for rest. Duties & Responsibilities: Operate Markit!'s logging forestry equipment (e.g. Skidder, Feller Buncher, Log Loader, Harvester, Delimber, Processor, Tracked Skidder, Dozer, water truck) as appropriate for each project. Perform chainsaw felling operations, including directional felling, limbing, and bucking. Manage slash operations, including lop-and-scatter, chipping, and hauling. Perform road work, excavation, lifting work, site clean-up, etc. Control erosion by contour felling and LEB creation and installation. Responsible for completing and submitting proper daily inspections and maintenance on assigned machine(s), requesting any necessary repairs/maintenance from the Fleet Department. Adhere to Markit!'s safety standards and promote safety culture among crew members, including the proper use of machinery and equipment and resolve problems when they arise. Participate in weekly job site maintenance training conducted by the Foreman. Perform equipment repairs/maintenance. Prepare to spend multiple overnights at project sites, as necessary. General forestry labor, as necessary and appropriate. Requirements: 1- 3 years of experience in operating heavy machinery, logging industry preferred. 18 years of age or older. Must possess a valid driver's license and a clean driving record. Must pass pre-employment background check. Ability to work in a team and independently. Excellent communication skills. Have the ability and desire to perform strenuous outdoor work on rough terrain in a variety of inclement weather conditions. Quick and able learner with strong leadership skills and a keen eye for details and good decision-making and problem-solving skills. Ability to work under pressure and stress and handle emergency situations. Effectively complete work projects on time. Ability to utilize safety procedures. Physical ability to bend, squat and lift up to 50 pounds. Technical skills and ability to use a smart phone and/or tablet. Must have reliable transportation to, from and while working on the job site. Language: English required. Bi-lingual (English/Spanish) is a plus. Benefits: Annual reviews. Annual boot allowance. Health insurance including medical, dental and vision. Supplementary insurance including life, short and long term insurance. Paid holidays, vacation and personal time. Retirement with company match. Company provided training for career advancement. Compensation: $26.00 - 40.00 hourly, dependent on qualifications and experience. Markit! Forestry is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or status as a protected veteran.

Job Description: This position will help Markit! execute various forestry projects and be responsible for assisting in the proper maintenance, preparation and operation of all tools and equipment including hand tools, chainsaws, chippers, and heavy machinery. This position will report to and work closely with the Project Foreman and Superintendent. Location: Projects may be located throughout the State of California and surrounding states. Travel: 50-75% but may be up to 100% depending on the project assignment. Lodging and per diem provided as well as adequate time off for rest. Duties & Responsibilities: Operate Markit!'s heavy forestry equipment (e.g. Skidder, Feller Buncher, Log Loader, Harvester, Delimber, Masticator, Tracked Skidder, Dozer, Excavator, Chipper) as appropriate for each project. Perform chainsaw felling operations, including directional felling, limbing, and bucking. Manage slash operations, including lop-and-scatter, chipping, and hauling. Perform road work, excavation, lifting work, site clean-up, etc. Control erosion by contour felling and LEB creation and installation. Responsible for completing and submitting proper daily inspections and maintenance on assigned machine(s), requesting any necessary repairs/maintenance from the Fleet Department. Adhere to Markit!'s safety standards and promote safety culture among crew members, including the proper use of machinery and equipment and resolve problems when they arise. Participate in weekly job site maintenance training conducted by the Foreman. Perform equipment repairs/maintenance. Prepare to spend multiple overnights at project sites, as necessary. General forestry labor, as necessary and appropriate. Requirements: 1- 3 years of experience in operating heavy machinery, forestry industry preferred. 18 years of age or older. Must possess a valid driver's license and a clean driving record. Must pass pre-employment background check. Ability to work in a team and independently. Excellent communication skills. Have the ability and desire to perform strenuous outdoor work on rough terrain in a variety of inclement weather conditions. Quick and able learner with strong leadership skills and a keen eye for details and good decision-making and problem-solving skills. Ability to work under pressure and stress and handle emergency situations. Effectively complete work projects on time. Ability to utilize safety procedures. Physical ability to bend, squat and lift up to 50 pounds. Technical skills and ability to use a smart phone and/or tablet. Must have reliable transportation to, from and while working on the job site. Language: English required. Bi-lingual (English/Spanish) is a plus. Benefits: Annual reviews. Health insurance including medical, dental and vision. Supplementary insurance including life, short and long term insurance. Paid holidays, vacation and personal time. Retirement with company match. Company provided training for career advancement. Compensation: $25.00 - 40.00 hourly, dependent on qualifications and experience. Markit! Forestry is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or status as a protected veteran.

This position is accountable for safely and efficiently operating bulldozers to move earth, rock, gravel, sand, or other materials on construction sites. Duties include grading, leveling, sloping, backfilling, and clearing land to prepare job sites for utility, roadway, and structural projects. The operator is also responsible for the proper operation and routine maintenance of the bulldozer and may assist with other construction-related tasks as needed to support project completion. The incumbent must have the ability and flexibility to work different shifts and long hours (8-12 hours). Weekend work and extra hours occur according to production needs and at the discretion of the Crew Supervisor. The incumbent must support the guiding beliefs and core values of the Company, which are centered on Safety, Quality, Delivery, and Teamwork (each of equal weight and importance) but, most importantly, with each built upon the all-important foundation of Integrity. SPECIFIC RESPONSIBILITIES Operates bulldozers to cut, move, and spread material to rough or finish grade specifications. Clears and levels land for construction, roadwork, and utility installation. Maintains proper slopes and drainage on job sites. Performs pre-operation and post-operation inspections of equipment. Monitors gauges, levers, and controls to ensure equipment functions properly. Fuels, lubricates, and performs basic maintenance in accordance with manufacturer guidelines. Coordinates with grade checkers, survey crews, and supervisors to ensure accurate cuts and fills. Loads and pushes materials to designated areas or stockpiles. Follows traffic control, utility markings, and project site safety requirements. Collaborates with other crew members to ensure efficient and safe job site operations. Assists in other duties as assigned, including general labor or equipment support. Maintains equipment and tools to ensure long lasting use. All employees, current and former, must maintain confidentiality by not disclosing to others any confidential, proprietary or trade secret information belonging to the Company. EMPLOYEE SAFETY AND COMPLIANCE Responsible and accountable for incumbent's own personal safety. Responsible and accountable for the safety of all co-workers and any other incumbents encountered. Authorized and obligated to stop work on any task or series of tasks whenever an unsafe condition or situation is anticipated or is observed. Complies with all applicable laws, regulations, and Company policies and procedures and is subject to appropriate disciplinary action (including dismissal) for failure to do so. Reports all violations of applicable laws, regulations, or Company policies and procedures promptly and is subject to appropriate disciplinary action (including dismissal) for failure to do so. Performs other duties as may be assigned or requested by immediate supervision (such as certification training, safety training, procedure review, etc.). POSITION REQUIREMENTS A minimum of 7+ years of experience operating bulldozers in construction is required. Technical proficiency in grading, site preparation, and earthmoving procedures is essential. In addition, the incumbent must: Be able to operate any small to medium sized 6-way dozer (D2 to D7 or equivalent) Must be able to cut and maintain finish grade with blue tops and cut stakes Experience with machine control GPS preferred Must be able to cut slopes and backslopes carrying grade from 2:1, 3:1, 6:1 to 10:1 Proficient with soil stabilization including lime treat, lime-flyash treat, cement treat subgrade Proficient in placing, processing and compacting of flexbase Operating this machine requires a daily inspection be completed everyday Be able to read and interpret grade stakes, blueprints, and site plans. Demonstrate strong awareness of grading tolerances, slopes, and drainage. Be able to work in constant change in weather and site conditions. Be able to lift, climb, balance, stoop, kneel, crouch, crawl, reach, and perform other physical activities as needed. The Company expects and requires incumbent and each of its other employees to observe and fulfill the above and all other safety responsibilities and actively work toward maintaining a safe workplace. Failure to do so can result in disciplinary action, up to and including termination of employment. PHYSICAL/MENTAL REQUIREMENTS The incumbent must be able to perform the essential functions of the job with or without reasonable workplace accommodation. The individual must also be able to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. This includes a hard hat, safety glasses, respirators, ear plugs, steel-toed shoes, or other protective equipment as required by the work performed and the location the work is being done. This individual must also have the ability to identify critical issues and formulate action plans with all levels of management, including corporate and executive. The incumbent must possess the ability to remain calm during emergencies and respond appropriately as dictated by the circumstance of the incident and as directed by the Safety Representative or other management personnel. Must be capable of evacuating the work area in a timely manner should an emergency situation arise. Compensation & Benefits: An excellent compensation and benefits package is offered. Benefit plans include: Medical, including Prescription Drugs Dental Vision Life and AD&D Insurance Short Term and Long-term Disability Insurance Employee Assistance Plan 401(k) Retirement Plan Paid Time Off for Vacation, Sick, Holidays, Jury Duty and Bereavement Leave Pre-Tax Health and Dependent Care Flexible Spending Accounts Career Growth & Development Candidate Response: Qualified applicants should apply through the company career page: *************************************************************** Candidates that do not meet the minimum requirements will not be considered. The Company is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, gender identity and sexual orientation), age, national origin, genetic information, disability, veteran status or any other category protected by law.

This position is accountable for operating machinery to move construction materials, dirt, and other heavy loads, as well as operating gasoline and diesel-powered equipment that clears grades and prepares the job site. This includes operating excavation and loading machines equipped with scoops, shovels, and buckets that dig sand, gravel, dirt, and similar materials, as well as operating bulldozers, trench excavators, road graders, and similar equipment. The incumbent must have the ability and flexibility to work different shifts and long hours (8-12 hours). Weekend work and extra hours occur according to production needs and at the discretion of the Crew Supervisor. The incumbent must support the guiding beliefs and core values of Orion, which are centered on Safety, Quality, Delivery, and Teamwork, most importantly with each built upon the all-important foundation of Integrity. SPECIFIC RESPONSIBILITIES Fastens attachments (graders, buckets, and rollers) to tractors with hitch-pins. Operates earth-moving equipment. Performs inspections of the equipment prior to and at the end of daily operations. Greases all appropriate parts as recommended by the manufacturer. Maintains the equipment as per manufacturer guidelines. Checks to make sure that equipment functions properly. Cleans, maintains, and makes basic repairs to equipment. Reports malfunctioning equipment to supervisors promptly. Maintains equipment and tools to ensure long-lasting use. All employees, current and former, must maintain confidentiality by not disclosing to others any confidential, proprietary, or trade secret information belonging to the Company. EMPLOYEE SAFETY AND COMPLIANCE Responsible and accountable for incumbent's own personal safety. Responsible and accountable for the safety of all co-workers and any others incumbent encounters. Authorized and obligated to stop work on any task or series of tasks whenever an unsafe condition or situation is anticipated or is observed. Complies with all applicable laws, regulations, and Company policies and procedures and is subject to appropriate disciplinary action (including dismissal) for failure to do so. Reports all violations of applicable laws, regulations, or Company policies and procedures promptly and is subject to appropriate disciplinary action (including dismissal) for failure to do so. Performs other duties as may be assigned or requested by immediate supervision (such as certification training, safety training, procedure review, etc.). POSITION REQUIREMENTS A minimum of three years of experience operating earth-moving equipment is required. An understanding of construction principles and procedures is a must. A high school diploma or GED is preferred. In addition, the incumbent must: Be able to work in constant change in weather and site conditions. Be able to lift, climb, balance, stoop, kneel, crouch, crawl, reach, and other similar activities as needed. The Company expects and requires incumbent and each of its other employees to observe and fulfill the above and all other safety responsibilities and actively work toward maintaining a safe workplace. Failure to do so can result in disciplinary action up to and including termination of employment. PHYSICAL/MENTAL REQUIREMENTS The incumbent must be able to perform the essential functions of the job with or without reasonable workplace accommodation. The individual must also be able to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. This includes a hard hat, safety glasses, respirators, ear plugs, steel-toed shoes, or other protective equipment as required by the work performed and the location the work is being done. This individual must also have the ability to identify critical issues and formulate action plans with all levels of management, including corporate and executive. The incumbent must possess the ability to remain calm during emergencies and respond appropriately as dictated by the circumstance of the incident and as directed by the Safety Representative or other management personnel. Must be capable of evacuating the work area in a timely manner should an emergency situation arise. Compensation & Benefits: An excellent compensation and benefits package is offered. Benefit plans include: Medical, including Prescription Drugs Dental Vision Life and AD&D Insurance Short Term and Long-term Disability Insurance Employee Assistance Plan 401(k) Retirement Plan Paid Time Off for Vacation, Sick, Holidays, Jury Duty and Bereavement Leave Pre-Tax Health and Dependent Care Flexible Spending Accounts Career Growth & Development Candidate Response: Qualified applicants should apply through the company career page: *************************************************************** Candidates that do not meet the minimum requirements will not be considered. The Company is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, gender identity and sexual orientation), age, national origin, genetic information, disability, veteran status or any other category protected by law.

Job Description: This position will help Markit! execute various forestry projects and be responsible for assisting in the proper maintenance, preparation and operation of all tools and equipment including hand tools, chainsaws, chippers, and heavy machinery. This position will report to and work closely with the Project Foreman and Superintendent. Location: Projects may be located throughout the State of California and surrounding states. Travel: 50-75% but may be up to 100% depending on the project assignment. Lodging and per diem provided as well as adequate time off for rest. Duties & Responsibilities: Operate Markit!'s heavy forestry equipment (e.g. Skidder, Feller Buncher, Log Loader, Harvester, Delimber, Masticator, Tracked Skidder, Dozer, Excavator, Chipper) as appropriate for each project. Perform chainsaw felling operations, including directional felling, limbing, and bucking. Manage slash operations, including lop-and-scatter, chipping, and hauling. Perform road work, excavation, lifting work, site clean-up, etc. Control erosion by contour felling and LEB creation and installation. Responsible for completing and submitting proper daily inspections and maintenance on assigned machine(s), requesting any necessary repairs/maintenance from the Fleet Department. Adhere to Markit!'s safety standards and promote safety culture among crew members, including the proper use of machinery and equipment and resolve problems when they arise. Participate in weekly job site maintenance training conducted by the Foreman. Perform equipment repairs/maintenance. Prepare to spend multiple overnights at project sites, as necessary. General forestry labor, as necessary and appropriate. Requirements: 1- 3 years of experience in operating heavy machinery, forestry industry preferred. 18 years of age or older. Must possess a valid driver's license and a clean driving record. Must pass pre-employment background check. Ability to work in a team and independently. Excellent communication skills. Have the ability and desire to perform strenuous outdoor work on rough terrain in a variety of inclement weather conditions. Quick and able learner with strong leadership skills and a keen eye for details and good decision-making and problem-solving skills. Ability to work under pressure and stress and handle emergency situations. Effectively complete work projects on time. Ability to utilize safety procedures. Physical ability to bend, squat and lift up to 50 pounds. Technical skills and ability to use a smart phone and/or tablet. Must have reliable transportation to, from and while working on the job site. Language: English required. Bi-lingual (English/Spanish) is a plus. Benefits: Annual reviews. Health insurance including medical, dental and vision. Supplementary insurance including life, short and long term insurance. Paid holidays, vacation and personal time. Retirement with company match. Company provided training for career advancement. Compensation: $25.00 - 40.00 hourly, dependent on qualifications and experience. Markit! Forestry is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or status as a protected veteran. Powered by JazzHR 04xIE9N5AE

Job Description Responsible for operating different machinery needed to build projects. This includes assisting the different trades that we work with when needed. Examples; unloading and loading materials, digging, raking, mixes and pours concrete, work with operating engineers, and other construction site workers. Primary responsibilities: Operating machinery safely and effectively to reach goals. Assist in building structures for residential, commercial, and construction sites. Assist construction managers. Read blueprints and designs. Operate laser guidance equipment. Operate all tools as needed and requested Operate pavement breakers, jackhammers, earth tampers, concrete, mortar, and plaster mixers. Demolition as needed Preferred Qualifications: 1 -3+ years' experience in commercial/residential construction Massachusetts Hoisting license OSHA 10 preferred Must have tools of your trade Verifiable references Committed to safety at all times! Reliable transportation and attendance Some overnight travel SAI offers competitive salary and a full benefits package including medical, dental, life and disability insurances, flexible spending accounts, 401(k) plan and paid time off. SAI is an equal opportunity employer.

Arrowmark LLC is seeking a Heavy Equipment Operator to join our team. Must be able to drive and operate equipment such as Excavators, Finish Blades, Scrapers, Gannon Tractors, Front-End Loader and Skid Steers. Key Duties and Responsibilities: Drive and operate equipment as assigned. Responsible for conducting a daily inspection of machine being operated. Responsible for the operation of the heavy equipment in accordance with the company's safety procedures. Responsible for locating various utilities and other obstructions on-site that could hamper the smooth operation. Value and respect a teamwork environment. Qualifications: Must be able to understand and follow instruction from the supervisor. Ability to read and comprehend simple instructions, short notes and memos. Excellent attendance required, dependable, trustworthy, strong work ethic, respects authority. Follow OSHA Guidelines on Heavy Equipment Operation. This is a Safety Sensitive position and requires a drug screen and basic physical Valid AZ Driver License and acceptable MVR required Physical Requirements: Must have ability to sit for prolonged periods of time. May occasionally be required to stand, walk, climb or balance, and stoop, kneel, crouch, or crawl. Must be able to lift 50 pounds in performance of duties. Vision requirements include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. Benefits: Competitive compensation (DOE), 401(k), 401(k) matching, Dental insurance, Health insurance, Vision insurance, Health savings account, Life insurance, Paid Sick Time Off (SPTO), Paid Vacation Time Off (VPTO), Holidays, Employee Assistance Program, Parental Leave and more! Arrowmark LLC is an equal-opportunity employer. Arrowmark LLC is committed to the full inclusion of all individuals. We recruit, train, compensate, and promote regardless of race, religion, color, national origin, sex, disability, age, veteran status, and other protected status as required by applicable law. Must be able to perform all essential duties and functions of the job. This job description may not be inclusive of all assigned duties, responsibilities, or aspects for the job described, and may be amended at any time at the sole discretion of the Company. Please Note: Arrowmark does not accept unsolicited resumes or outreach from staffing or recruiting agencies. Please no phone calls or emails. All candidates must apply directly. Pre-employment screening includes: Drug Screen, Basic Physical, Background and MVR Check, Verification of Prior Employment and References.

Trinity Heads, Inc. is hiring a Career Equipment Operator (Press Helper) at our Navasota plant. Our products are an integral part of the supply chain that helps fuel our lives and our economy. Over the last 85 years, Trinity Industries has grown to over 6,000 employees strong with the common purpose of Delivering Goods, For the Good of All. The Equipment Operator position is a great opportunity for a resilient, team-minded individual who doesn't stray away from a challenge. What you'll Do: Operates overhead cranes. * Able to pass required forklift written and driving tests. * Uses basic measuring devices, such as tape measure, and has working knowledge of shop math. * Performs housekeeping and maintains all required records. * May be involved in safety committees or initiatives. * Performs other duties as assigned. What you'll Need: * Experience in machine operation, such as press * Overhead crane and forklift experience * Must be able to read a tape measure and perform basic shop math * Safely and efficiently perform all essential functions Trinity Heads, Inc. (hereinafter 'Trinity') is a government contractor and Equal Opportunity Employer. It is our policy to consider candidates for employment without regard to race, color, sex, sexual orientation, gender identity, religion, age, national origin, disability, or protected veteran status.

The statements below are intended to describe the general nature and level of work being performed by associates assigned to this job. This job description is not intended to be an exhaustive list of all responsibilities and skills required of associates so classified. USALCO Mentor Plant, LLC is a major unit within the manufacturing network of a leading provider of aluminum-based component products used in water treatment, pulp and paper manufacturing, the making of catalysts for oil refining, the housing market and other sectors. The right individual will have a can-do attitude, the ability to be part of a team while operating independently and consistently perform to very high standards. JOB SUMMARY: The person in this role is responsible for blending, loading, and unloading chemical products while assuring compliance is achieved in all company associated policies. The position requires a motivated, detail oriented, and results driven team player who: Incorporates safety and quality into every decision while performing day-to-day activities Effectively communicates with Supervisor and peers Can efficiently handle chemicals and operate equipment to safely manufacture quality products Will actively seek out opportunities for process improvement and take full responsibility for collaborating with management and peers to implement approved changes in a timely manner. The employee in this position will be a positive-natured, task-oriented individual with chemical manufacturing experience and significant mechanical aptitude. The Blender/Loader is responsible for the safe and efficient operation of plant equipment and ability to follow procedures. The person must possess excellent communication skills necessary to keep supervisor and peers informed of production status. This person must be personally and professionally motivated to work constructively with team members at all levels within the company to execute job responsibilities. ROLES AND RESPONSIBITIES: Overseeing the safe and efficient operation of the blending process or processes assigned, including the safe transfer of hazardous chemicals. Apply all plant safety rules, work guidelines / practices, and procedures Wearing and maintenance of personal protective equipment required for working with hazardous chemicals Developing and applying improvements in processes, equipment and procedures Daily Responsibilities: Complete walk-thru of the process and equipment to audit safety and maintain operational records Assist with cleaning, and reloading of chemical reactors for production runs Work with Production manager to coordinate manufacture of finished goods and ensure final products meet specifications within shipping schedule Blend and mix chemicals per batch sheet instructions to meet customer requirements, fill sample retain bottles, and complete quality documentation Load drums and/or totes with finished goods and properly label & seal containers Assist in shipping by coordinating the loading of bulk tankers and LTL trailers while completing all necessary paperwork and recordkeeping. Assist in receipt of raw materials to the site including offloading and completing all necessary paperwork and recordkeeping. Maintenance Maintain a 5S mentality (Sort, Straighten, Sustain, Shine, Systemize) This is a USALCO philosophy to maintain a clean and orderly plant and includes inspecting your area and returning any and all tools, equipment, hoses, etc. to its proper place and maintain a clean work environment Inspect plant equipment daily and report any issues to the supervisor Assist in routine maintenance activities, including but not limited to: pipe and valve installation, pump replacement, etc. Willing to work overtime, provide physical labor and occasional weekend work as required to meet business requirements. Perform other duties as assigned in support of business goals and objectives. MINIMUM QUALIFICATIONS: KNOWLEDGE AND SKILLS Requires planning skills to prioritize daily process operation Must be able to pay attention to detail Knowledge of chemical manufacturing and equipment Must be dependable, flexible and able to respond on short notice to satisfy requirements of customers. Requires good interpersonal and communication skills. The ability to clearly communicate with others, both verbally and in written form Strong Analytical and Mathematical aptitude Typical office organizational skills, with basic computer literacy in Microsoft Office. General industrial maintenance/operations experience including pipe assembly, pump installation and repair, and general mechanical equipment knowledge. Forklift experience and certification preferred. If not, must be able to complete certification thru USALCO. EDUCATION: A High School Diploma or GED equivalent required EXPERIENCE: Chemical or manufacturing experience, preferred Prior Forklift driving experience ESSENTIAL FUNCTIONS: The Ability to: Must be able to wear a APR (SCBA respirator system), pass Spirometry test and comply to wear one, as required. Routinely lift 35 to 50 lbs. throughout the shift Routinely stand 80% of shift Routinely climb bulk tanker ladders to load tankers Work in awkward or confined spaces Work both indoors and outdoors during all seasons USALCO is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. As a general policy, USALCO does not offer employment visa sponsorships upon hire or in the future.

Job Description USALCO La Porte is a major unit within the manufacturing network of a leading provider of aluminum-based component products used in water treatment, pulp and paper manufacturing, and other sectors. The right individual will have a can-do attitude, the ability to be part of a team while operating independently, and consistently performs to very high standards. JOB SUMMARY: The person in this role is responsible for packaging, labeling and loading manufactured products while assuring compliance is achieved in all company associated policies. The position requires a motivated, detail oriented, and results driven team player who: Incorporates safety and quality into every decision while performing day-to-day activities Effectively communicates with Supervisor and peers Shift work and weekend work may be required Can efficiently package and load manufactured products Can operate a fork truck to unload and load raw materials and finished products Will actively seek out opportunities for process improvement and take full responsibility for collaborating with management and peers to implement approved changes in a timely manner. The employee in this position will be a positive-natured, task-oriented individual with material handling experience and significant mechanical aptitude. The Material Handler is responsible for the safe and efficient loading of manufactured products. The person must possess excellent communication skills necessary to keep Supervisor and peers informed of scheduling and order completion. This person must be personally and professionally motivated to work constructively with team members at all levels within the company, to execute job responsibilities ROLES AND RESPONSIBITIES: Apply all plant safety rules, work guidelines / practices, and procedures Overseeing the safe and efficient operation of the plant equipment. Wearing and maintenance of personal protective equipment required for working with hazardous chemicals Developing and applying improvements in processes, equipment, and procedures Daily Responsibilities: Complete walk-through of the plant and equipment to audit safety/housekeeping Assist in loading/unloading trailers with products Unload raw materials as needed Complete blends as needed Follow all batch sheets Complete Certificates of Compliance for loaded trailers Complete all paperwork accurately including batch sheets, packaging counts and bills of lading Maintain and communicate information with the other shifts Provide support to Plant operations as needed Maintenance Complete MaintainX work requests for maintenance issues Inspect plant equipment daily and report any issues to Supervisor Must be able to work overtime, provide physical labor and work changing shifts as required to meet business requirements. Perform other duties as assigned in support of business goals and objectives. MINIMUM QUALIFICATIONS: KNOWLEDGE AND SKILLS Requires planning skills to prioritize daily packaging requirements Must be able to pay attention to detail Knowledge of general manufacturing equipment and forklift operation Must be dependable, flexible, and able to respond on short notice to satisfy requirements of customers. The ability to communicate with others clearly and succinctly, both verbally and in written form. Ability to utilize and perform minimal computer tasks Microsoft Office EDUCATION: A High School Diploma or GED EXPERIENCE: Chemical, Pharmaceutical or Food manufacturing environment, preferred ESSENTIAL FUNCTIONS: The Ability to: Must be able to obtain Forklift License through USALCO within 14 calendar days of being hired. Routinely lift 50 to 75 lbs. throughout the shift Routinely stand 60 to 70% of shift Routinely must traverse ship ladders, catwalks and close quarters USALCO is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. As a general policy, USALCO does not offer employment visa sponsorships upon hire or in the future.

Gun Drill Operator Shift: 1st Shift - 6AM Start Time Contract: 90-day contract-to-hire Pay: Based on experience A manufacturing team in Roseville is seeking a skilled Gun Drill Operator to support precision drilling operations in a fast-paced production environment. This role is ideal for someone with hands-on experience running gun drilling machines who values quality and efficiency. Core Responsibilities: Operate and set up gun drilling machines to produce precise, high-quality drilled components Interpret blueprints, drawings, and specifications to ensure accuracy Monitor machine operations and make adjustments to maintain quality and productivity Perform routine machine maintenance and troubleshooting Collaborate with quality control to meet AS9102 and ISO9001 standards Maintain a clean and safe work environment Requirements: Prior experience operating gun drilling machines Strong blueprint reading skills and attention to detail Ability to work independently and as part of a team Comfortable with lifting up to 40 lbs and standing for extended periods High School Diploma or GED preferred This is a 1st shift, 90-day contract-to-hire opportunity with pay commensurate with experience. If you are a dependable operator looking to advance your career in precision machining, apply now Linked, LLC is an equal opportunity employer committed to creating a diverse and inclusive workplace. We celebrate and embrace differences and are dedicated to providing equal employment opportunities to all individuals regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status. Our goal is to ensure that every employee and applicant is treated with respect and fairness. We welcome and encourage applications from all qualified candidates and are committed to making reasonable accommodations to support diverse needs throughout the hiring process. Linked, LLC is proud to be an equal opportunity employer and is dedicated to fostering a work environment where everyone can thrive.