Senior Electrical Engineer jobs at Larson Design Group - 2030 jobs

General Description: We are seeking aSr. Electrical Engineer (PE Preferred)) for our New York, NY office! The Senior Electrical Engineer shall be engaged in projects involving, but not limited to, the design of facility related electrical distribution systems, interior and exterior lighting, low voltage systems (security, communications, data systems), and emergency backup systems. They will participate in and support project teams to undertake the design and delivery of services related to design and construction of electrical systems, as well as the overall project. This position shall be responsible to Project Manager(s) and the local Operations Manager. Essential Functions: Functions as Project Manager, Lead Electrical Engineer, and/or Senior Electrical Engineer on a variety of assignments with electrical design scope and other disciplines. Role may vary based on size, complexity, and location of the projects. Ensures coordinated design on projects. Participates in the design development of electrical work. Creates and reviews drawings, technical specifications. Contributes to estimation of projects, planning and construction feasibility. Participates in the development of design drawings. Able to provide advisory information during the construction phase. Able to perform site surveys and contributes to engineering studies. Attends and contributes to office, client and project meetings. Participates in the monitoring of project production and schedules to ensure projects are completed on schedule and within budget. Participates and ensures the quality of the work produced maintains high standards. Performs engineering studies. Performs technical and coordination check-review of project documentation and drawings. Follows up on issues with design and production staff to resolve problems and concerns. Participates in internal project meetings on a regular basis, including being responsible for minutes. Secondary Functions: Related duties as assigned. Supports applicable requests as needed. Lends support to all business areas outside of electrical focus as needed. Duties as assigned by Operations Manager or Regional Director. Education/Experience Minimum: Bachelor's degree in Electrical Engineering. PE Preferred. Minimum of eight (8) to ten (10) years' experience in a technical and management capacity reflecting increasing responsibility. Ability to drive and maintain a safe driving record. Valid state driver's license (any in US). In possession of appropriate paperwork to gain and maintain employment in the US. Ability to pass pre-hire drug testing and background check(s). Ability to meet worksite security requirements including FBI and State Police criminal background checks and DHS threat assessment evaluations. Needed Skills: Proficient in project/task management. Ability to create and maintain productive relationships with employees, clients, and vendors. Understanding of principals of A/E industry. Strong knowledge of National Electrical Code (NEC), NFPA Life Safety Codes, and applicable local building codes. Working experience with software: Revit and AutoCAD, Visual, GenSize and SKM Power Tools. Good communications and negotiations skills. Good leadership skills. Ability to multi-task. Ability to prioritize tasks. Detail and safety-oriented. Excellent written and spoken English. About the Organization: ARORA ENGINEERS, LLC (ARORA) - Arora provides clients in the aviation, transportation, education, government, and commercial/institutional sectors with engineering services for intelligent infrastructure solutions. Through smart design, construction management, and facilities maintenance management, we rethink industry needs to help keep clients on the cutting edge and add value to a project. Arora is a growing firm that welcomes individuals with a thirst for knowledge and the energy to tackle projects that help take the infrastructure of our world to the next level. DISCLAIMER: The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of employees assigned to this position. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against, on the basis of these factors or of disability.

Site Supervisor (MEP) Location: Data Center and Commercial sites - United States - Travel will be required across all states. Employment Type: Full-time / Contract Salary: $55,000 - $95,000 + package A leading data center construction and engineering organization is seeking a skilled and motivated Site Supervisor to oversee building or mechanical/electrical (MEP) activities within critical data center environments. The successful candidate will ensure that all on-site construction, maintenance, and repair operations are executed safely, efficiently, and in full compliance with established procedures and industry standards. This position requires a strong understanding of data center systems, excellent organizational skills, and the ability to lead diverse teams in high-performance environments. Key Responsibilities Supervise and coordinate all on-site activities related to building construction or MEP systems, depending on area of specialization. Enforce adherence to safety, security, and operational protocols within live data center environments. Manage and oversee subcontractors, ensuring quality work, safety compliance, and schedule adherence. Conduct regular site inspections to identify and mitigate potential hazards, risks, or compliance issues. Maintain detailed records and documentation, including permits, inspections, and safety logs. Collaborate closely with data center operations teams to minimize downtime and avoid disruption to critical infrastructure. Communicate effectively with project managers, engineers, and stakeholders to align on project goals and deliverables. Diagnose and resolve technical issues promptly to maintain project continuity. Ensure all work complies with relevant building codes, regulations, and industry best practices (e.g., NFPA, OSHA). Participate in pre-construction planning, offering insights on constructability, risk, and scheduling. Skills & Qualifications Proven experience supervising building construction or MEP projects; data center experience is a plus. Strong understanding of data center operations and critical infrastructure systems. Excellent knowledge of safety regulations, building codes, and industry standards. Demonstrated ability to lead subcontractors, manage resources, and maintain timelines. Strong communication, leadership, and problem-solving abilities. Proficiency in reading and interpreting technical drawings, blueprints, and schematics. Competent in Microsoft Office Suite and project management software. OSHA certification preferred.

Founded in 1975, BR+A Consulting Engineers maintains a total staff of over 500 employees located at our main office in Boston and branch offices in New York, NY; Philadelphia, PA; Vienna, VA (Washington, DC); Coral Gables, FL (Miami); Chicago, IL; St. Louis, MO; Tampa, FL; Charlotte, NC; Charleston, SC; Houston, TX; New Haven, CT; Los Angeles, CA; and Toronto. BR+A provides state-of-the-art integrated and coordinated mechanical, electrical, plumbing and fire protection consulting engineering, technology systems design, lighting design, and building commissioning services. BR+A is seeking a skilled Electrical Engineer for our New York, NY office. Ideal candidates will be strongly motivated, well organized, and show professional initiative. Being able to take ownership of assignments and perform well both independently and as part of the project team is also necessary. Essential Functions: Provide Engineering, Design work and drafting of plans Implement approved system concepts from a schematic diagram to floor plans Sketch rough layouts to review with Project Engineer or Project Manager Review product cut sheets and technical information Communicate with Project Manager/Project Engineer regarding potential problems Meet with vendors to determine spatial requirements for the application of the product Attend meetings as required Work to submit the required documentation per project deadlines and milestones Develop a strategy to meet the projects' schedule Assist in the development of engineering systems concepts (M/E) Assist the design team on major design issues Responsible for organizing required technical correspondence, emails, and calculations Perform fieldwork and verification of existing conditions Revit and AutoCad proficiency is a requirement Essential Job Knowledge, Skills and Abilities: Excellent communication skills both verbal and written Good understanding of engineering concepts, design, and spatial requirements Positive attitude, results-driven and team-oriented Able to think three-dimensionally Capable of visiting job sites to perform fieldwork Able to manage time to meet deadlines Minimum Qualifications: A Bachelor's degree in Electrical Engineering EIT required PE license preferred 5-10 years of experience in healthcare and/or institutional design BR+A is a place to learn, to grow, to work hard for clients that matter - and to be part of something bigger. We offer a competitive compensation and benefits package, including Medical, Dental, Life, and Disability insurance coverage, a 401K plan match, generous paid time-off, and much more, to all our full-time employees. BR+A is an Equal Opportunity Employer. All qualified individuals are encouraged to apply irrespective of race, age, religion, gender identity, sexual orientation, national origin, disability, genetic information, military service, or other non-merit-based factors. Drug testing is a prerequisite for employment. Visit *************** for more information about our award-winning projects and our incredible team. Salary Range for 5-10 year of experience: $90,000 - $125,000

Are you ready to elevate your career in electrical engineering? Join our team and seize an exceptional opportunity to lead a talented group of engineers in a dynamic work environment. Enjoy the benefits of exceptional tenure, a comprehensive benefits package with an out-of-pocket cost for family as low as $35, and a lucrative salary and bonus structure. Experience autonomy and the chance to make a significant impact in a heavy manufacturing facility. Required Qualifications Bachelor's degree in Electrical Engineering Minimum 5 years of experience in an industrial or heavy manufacturing facility Proven experience leading or managing engineering teams Experience with Allen-Bradley PLCs and software (RSLogix 500, RSLogix 5, Studio 5000, and FactoryTalk View ME) Experience designing and reading one-line diagrams, electrical schematics, and wiring diagrams for industrial electrical and control systems Ability to troubleshoot electrical systems (hydraulic and pneumatic systems a plus) AutoCAD experience a plus Responsibilities Lead and develop a team of 5 electrical engineers Design and upkeep of existing plant electrical systems Design electrical distribution and control schemes for new equipment Create one-line diagrams and schematics for new and existing equipment Work with suppliers and contractors when purchasing and installing equipment Assist maintenance in troubleshooting and repair of equipment, including instructing maintenance on proper troubleshooting techniques Work with purchasing on procurement of new and used electrical equipment Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services. Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Eastman Kodak Company is looking for a Control System Engineer to join our team in Rochester, NY. We are seeking an individual with the background to be successful supporting our batch Emulsion and Film Sensitizing Machine Manufacturing Operations located within Eastman Business Park in Rochester, NY. Primary Responsibilities • Provide technical support for the operation, maintenance and continuous improvement of manufacturing instrumentation and process control systems. • Work closely with operations, process engineers, and maintenance to understand the business and user needs and priorities. • Provide full life cycle support of control systems in our film sensitizing area, including developing requirements, programming support, commissioning, and ongoing hardware and software maintenance, from the control room to the field instrumentation. • Support upgrade projects for existing Rockwell Automation PLC based control systems, Emerson Ovation DCS and Reliance Automax Machine Coordinated Drive Control Systems including identifying system hardware and software architecture improvement opportunities. • Provide hardware and integration support for Ethernet based control systems in the plant IT environment. • Work with maintenance to develop data driven reliability improvement opportunities, as well as troubleshoot system hardware, resolve software malfunctions and assist in system improvements and software upgrades. • Implement improvements in systems capabilities that will increase the ability to meet customer requirements, including safe and reliable operations, and improve business competitiveness, using Six Sigma methodology as applicable. Qualifications • Bachelor's degree in electrical engineering or Electro-Mechanical Technology (Mechatronics) • Knowledge and understanding of Rockwell Automation PLC's and Process Control DCS • Communication skills: ability to interact with operator/mechanics/process engineers/staff/management • Knowledge of Rockwell VFD's, their application and configuration • Ability to complete work independently and through influence • Ability to lead and participate on teams, including outside contractors • Ability to configuring, documenting and troubleshooting control systems

Senior Project Engineer | Allied Resources Technical Consultants Allied Resources is seeking a Senior Project Engineer to support a major public-works construction project in the Philadelphia area. The position offers a competitive compensation and benefits package including medical, dental, vision, 401k with company match, paid time off, disability coverage, parental leave, volunteer days, and more. Job Responsibilities: Support day-to-day project coordination on a large public-works or commercial construction project, working closely with project managers, superintendents, subcontractors, and design teams. Assist with developing and maintaining project schedules, tracking progress, and preparing updates for project leadership. Manage and organize project documentation including submittals, RFIs, change orders, meeting minutes, and daily reports. Perform quantity takeoffs, track material usage, and support cost control and forecasting efforts. Review drawings, specifications, and contract documents to identify issues, inconsistencies, or potential conflicts. Support procurement activities including scope reviews, vendor coordination, material tracking, and delivery schedules. Provide technical assistance to field teams, helping troubleshoot constructability concerns and support quality control efforts. Participate in site walks, coordination meetings, and inspections; assist with punch lists, project closeout, and turnover documentation. Collaborate with internal and external stakeholders to keep communication clear, accurate, and organized throughout all phases of the project. Contribute to the implementation of safety, quality, and operational best practices across the project. Qualifications: Bachelor's degree in Construction Management, Civil Engineering, Mechanical Engineering, Architecture, or a related field preferred; equivalent experience welcomed. 2+ years of experience working as a Project Engineer, Senior Project Engineer, or similar construction engineering role. Experience supporting commercial, institutional, industrial, or public-works construction projects. Ability to read and understand construction drawings, technical specifications, and contract documents. Strong organizational and communication skills with the ability to manage multiple tasks in a fast-paced environment. Familiarity with construction or project management software (such as Procore, Bluebeam, P6, or equivalent). Strong problem-solving abilities and attention to detail. Valid driver's license and reliable transportation required. EEO Policy: Allied Resources complies with all Equal Employment Opportunity (EEO) affirmative action laws and regulations. Allied Resources does not discriminate on the basis of age, race, religion, color, sex, national origin, marital status, genetic information, sexual orientation, gender identity and expression, disability, veteran status, or any other status protected by law.

GL Staffing is seeking for a Manufacturing Engineer - Electrical with expertise necessary to design, develop, and implement manufacturing systems, processes, and tooling that support plant production activities. Salary: 70k - 80k a year (Based on experience) Location: Orlando, FL Job Duties and Responsibilities Develops test, manufacturing, and various assembly processes. Designs, develops, and maintains electrical/electronic test fixtures, jigs, and automated test equipment (ATE). Uses engineering tools and statistical concepts to maintain and continuously improve manufacturing processes. Investigates process issues and initiates corrective actions. Generates and maintains production-level documentation and operating procedures. Specifies and initiates the purchase of manufacturing tools, equipment, and supplies. Plans, specifies, and justifies capital equipment expenditures. Leads product and/or process improvement teams. Designs and develops test systems and electronic systems to support product testing and manufacturing. Collaborates closely with cross-functional engineering teams in a concurrent engineering environment. Performs other duties as assigned. Knowledge & Skills Familiarity with electronic design of test fixtures and systems is required. Hands-on role requiring interaction across multiple disciplines within a manufacturing environment. Proficiency with software applications such as Microsoft Word, Excel, and PowerPoint. Experience with AutoCAD, SolidWorks, Minitab, and Microsoft AX is preferred. Strong written and verbal communication skills are required. Education Bachelor's degree in Electrical Engineering Three (3) years of engineering experience in a manufacturing environment. Must be able to handle ITAR-controlled documents without requiring an export license. Physical Requirements & Working Environment Ability to sit and stand for extended periods. Primarily office-based work environment. Minimal lifting required. Compensation & Benefits Comprehensive medical, dental, and vision insurance. 401(k) retirement savings plan. Paid Time Off (PTO). Company-paid life insurance. Company-paid short-term and long-term disability insurance. Opportunities for career advancement and professional development. Apply now!

NOVA Engineering is hiring Staff Engineers to work on Construction Materials Testing & Special Inspection projects throughout the Pensacola, FL region. This opportunity will allow you to work on some of the most prestigious projects in the southeastern U.S. with much room for career advancement. Primary responsibilities will include: Staff/project engineering duties including data reduction, analysis & fieldwork for commercial, industrial, retail, government, office and residential projects (both Geotechnical Engineering and Construction Materials Testing/Inspection) Assisting with project management & reporting Field inspection, sampling & testing of soils/foundations, concrete, masonry, reinforcing steel, etc. Report preparation Client consultation and maintenance Qualifications: B.S. degree in Civil Engineering is required E.I.T. is required Recent Graduates Encouraged to Apply 0 - 2 years relative experience Strong communication skills Position entails approximately 80% fieldwork and 20% office with occasional travel Check out our Perks: In addition to our welcoming company culture and competitive compensation packages, our employees enjoy the below benefits: Use of take-home Company Vehicle and gas card for daily travel to work sites Comprehensive group medical insurance, including health, dental and vision Opportunity for professional growth and advancement Certification reimbursement Paid time off Company-observed paid holidays Company paid life insurance for employee, spouse and children Company paid short term disability coverage Other supplemental benefit offerings including long-term disability, critical illness, accident and identity theft protection 401K retirement with company matching of 50% on the first 6% of employee contributions Wellness program with incentives Employee Assistance Program NOVA is an Equal Opportunity Employer. All qualified candidates are encouraged to apply. NOVA does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, disability, national origin, ancestry, marital status, veteran status or any other characteristic protected by law.

Instrumentation & Controls (I&C) Engineer - PE Required Full-Time | On-Site | Semiconductor Industry | Multidiscipline A&E Firm We are seeking an experienced Instrumentation & Controls (I&C) Engineer with a Professional Engineer (PE) license to join our growing multidisciplinary Architectural & Engineering team. This role will focus heavily on semiconductor facility projects and requires deep technical expertise, strong coordination skills, and the ability to deliver high-quality engineering packages within a fast-paced project environment. The ideal candidate is proactive, detail-oriented, and comfortable working collaboratively with electrical, mechanical, process, and structural teams to support highly complex facility systems. Key Responsibilities Instrumentation & Controls Design Develop complete I&C design packages, including P&IDs, control narratives, loop diagrams, wiring diagrams, instrument indices, panel layouts, and I/O lists. Select, size, and specify instrumentation for systems such as ultrapure water, specialty gases, chemical distribution, HVAC, and process utilities. Create sequences of operation (SOO) and develop detailed control logic aligned with client requirements. Design and integrate control system architectures including PLC, DCS, SCADA, BMS, and EMS platforms. Prepare technical specifications and engineering documents for construction and permitting. Project Coordination Collaborate with multiple engineering disciplines to ensure complete and coordinated system designs. Participate in design reviews, model coordination meetings, and constructability sessions. Provide direction to CAD/Revit designers for instrument placement, routing, and system integration. Project Execution Prepare and seal engineering drawings and documents using a valid PE license. Assist with scope development, cost estimates, and proposal preparation for I&C project components. Review vendor submittals and shop drawings for compliance with project requirements. Field Support & Commissioning Provide on-site support including installation verification, calibration oversight, loop checks, and functional testing. Troubleshoot instrumentation and control system issues during construction and commissioning. Support development of punch lists and resolution of technical issues in the field. Quality, Codes & Standards Ensure all designs comply with ISA, SEMI, NEC, NFPA, IEEE, and applicable local codes. Maintain documentation integrity and support internal standards development. Client Interaction Attend client meetings and design presentations as needed. Communicate technical information clearly to clients, project managers, and multi-discipline teams. Provide timely updates and proactively identify project risks or design changes. Required Qualifications Bachelor's degree in Electrical Engineering, Mechanical Engineering, Chemical Engineering, or related field. Active Professional Engineer (PE) license (required). 5-10+ years of relevant engineering experience, preferably in semiconductor or advanced manufacturing environments. Strong knowledge of instrumentation, controls, automation systems, and semiconductor facility processes. Proficiency with I&C design tools, loop diagrams, P&IDs, instrument databases, and control system architecture. Understanding of ISA standards, NEC, NFPA, and SEMI requirements. Excellent communication, coordination, and problem-solving skills. Preferred Qualifications Experience with tool install projects, process utilities, and advanced semiconductor facilities. Experience working with PLC, DCS, SCADA, BMS, and EMS control platforms. Familiarity with AutoCAD, Revit, and instrumentation design software. Experience supporting commissioning, startup, and troubleshooting activities. Industrial Design offers full benefits including Health/Dental/Vision insurance (single and family), PTO, Paid Holidays and 401k. Affirmative Action/EEO statement - Industrial Design recruits, hires, employs, trains, promotes, and compensates individuals based on job-related qualifications and abilities. Industrial Design is an equal opportunity employer and values diversity. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, disability status, or any other status protected by law. Applicants please note: This position requires US work authorization, and we are not looking for out of country/outsourced support or remote workers of any kind. This opening is for local candidates residing in the metro phoenix area or those willing to self-relocate to this area only. All positions listed are full time in office roles with no opportunity for hybrid or work from home accommodations. If you are looking to work remote, please do not apply.

TAKE YOUR CAREER TO THE NEXT LEVEL--ESOP OPPORTUNITY IN SUNNY ARIZONA. Are you tired of traveling for work? Do you have experience with wastewater treatment? Want to earn a substantial bonus this year? Answer Yes and Come Join Us! Come join us as a Project Engineer and help our highly skilled team reach our future goals. A regional leader in Water/Waste Water Treatment Plant Construction is looking for Project Engineers to assist them with several major projects and you can grow into even more. You can have your head on your pillow at night and a better work-life balance than you previously had. Employee Appreciation and Value Salary: $80,000-$100,000 DOE Annual Bonus Program ESOP 401k with Company Match Vision, Dental, and Life Insurance Paid Vacation, Sick Leave, and Holidays Company Vehicle Qualifications 2+ years of extensive experience/knowledge of construction, design, and management in Wastewater Treatment Plants preferred. Must be able to apply innovative and effective management techniques to maximize employee performance. Experience in managing self-perform forces in WTP/WWTP & underground utilities. Thorough understanding of corporate and industry practices, processes, and standards Superior communication and interpersonal skills Strong computer skills, including proficiency in Primavera, Microsoft Office, and financial software. Must have a valid, non-restrictive driver's license. Responsibilities As the Project Engineer, you'll be responsible for assisting in the execution of various projects. You will be part of a team of Project Engineers and associated field management. You will be responsible for managing subordinates and subcontractors. The Project Engineer's position's accountability includes, but is not limited to: Pre-construction, Project Set-up, Project Cost-Control, Scheduling, Complete Project Oversight, and Profit & Loss. If you are a motivated individual with a passion for construction management, we invite you to apply for the position of Project Engineer. As a Project Engineer, you will play a crucial role in overseeing construction projects, ensuring their successful completion within budget and on schedule. You will have the opportunity to work with a talented team of professionals in a dynamic environment. Join our client's team today and be part of our commitment to excellence in construction management. G. Peterson Consulting Group, Inc. is a leading Executive Recruiting Firm for the Construction Industry. Our Experienced Recruiters are dedicated to identifying, qualifying, and delivering top talent nationwide. Let us help enhance your career. Services uphold the highest standards of professionalism, honesty, and integrity. Salary and benefits listed herein are only a guideline. All information listed above is subject to change and will be adjusted depending on experience. All searches are held in the utmost discretion. Confidentiality is exercised to the fullest, both to our candidates and clients. There are no fees for our candidates. We are an Equal Opportunity Employer.

As a Project Engineer with our Telios Construction Management (TCM) team, you will deliver enhanced construction administration services, supporting all aspects of mechanical, electrical, and plumbing (MEP) focused construction projects from planning to completion. This is a 24-month assignment supporting mission critical clients in Muskogee, OK. The Project Engineer will work closely with our Project Manager and key stakeholders to ensure successful project delivery, which shall include communicating, implementing project schedules, obtaining permits and licenses from appropriate authorities, reviewing/responding to RFI's, procuring, submitting, and managing the submittal process. The Project Engineer will act as the liaison between the owner, architect, general contractor, and our in-house MEP engineering team identifying critical issues that will impact performance, the quality or scope of work, ensuring all key project milestones and safety/quality standards are met. Responsibilities Project Planning: Develop comprehensive project plans, including scope, schedule, budget, and resources, in collaboration with stakeholders to ensure successful project execution Resource Management: Coordinate and allocate resources, including personnel, equipment, and materials, to ensure efficient project operations and adherence to project timelines Budget Management: Monitor project budgets and financials, track expenses, and provide regular reports to stakeholders to ensure projects are completed within budget constraints Risk Management: Identify and manage project risks, issues, and changes, and develop contingency plans to mitigate risks and ensure project success Quality Control: Establish and enforce quality control standards, conduct inspections, and ensure compliance with industry regulations and project specifications Stakeholder Communication: Maintain regular communication with internal and external stakeholders, including clients, contractors, vendors, and team members, to provide updates on project status and address any issues or concerns Minimum Criteria Must have a minimum of a high school diploma, or GED equivalent A minimum of 1 year of relevant work experience in a project engineering, assistant project management, field engineering, or construction supervision role within industrial, manufacturing, or heavy commercial environments OR A bachelor's degree in engineering, construction management, construction science, or a closely related discipline Internship or co-op experience in construction, project management, engineering services/design, or a related technical field (prior internship experience required in lieu of full-time work experience)

Project Engineer II- Licensed (Electrical) CSArch, an A/E firm with offices in Albany and Newburgh, NY is currently seeking a full-time Project Engineer for the Albany office. The Project Engineer II has at least 5 years of experience as a Licensed Engineer (Electrical). The successful candidate should possess an Associate's, Bachelor's, or Master's degree of Engineering. The candidate must have at least 3 years of Revit experience. This position is primarily responsible for the technical engineering and production aspects of medium to large projects from conceptual design through construction closeout. SPECIFIC DUTIES AND RESPONSIBILITIES: Leads in-house building systems design / engineering team through development of design and construction documentation process. Could also provide Project Engineer support as part of a larger project team on larger projects. Develops and coordinates with all engineering disciplines and architecture team to produce construction documents. Involved in field investigations, detailed engineering design work and development of design computations. Oversees code compliance with applicable engineering codes, standards and guidelines. Informs, directs and trains engineers-in-training and less experienced project engineers relative to these. Develops and coordinates engineering technical specifications. Adheres to and implements corporate contract documentation procedures and standards as they best apply. Responsible for all engineering aspects of construction administration including but not limited to shop drawing/submittal review and coordination, attending project meetings, developing field reports, periodic monitoring of construction sites, interfacing with contractors and clients. Supports project management with development of staffing, fee, budget estimating and project scheduling. Ensures that Quality Control procedures are being met. Will supervise small engineering staff and could have significant client contact. REQUIREMENTS/QUALIFICATIONS: Licensure Requirements: Licensed Education Requirements: Associate's, Bachelor's, or Master's degree of Engineering in electrical engineering. Experience: Minimum 5 years experience as a Licensed Engineer Computer Skills: Revit- minimum of 3 years experience and other design/presentation software programs; MS Office proficient; use of Adobe products; Submittal Exchange Excellent written, verbal and visual communication skills Detail oriented; highly organized; self-motivated; able to exercise independent judgment, multi-task, delegate, plan, set goals, meet critical deadlines, be accurate, work under pressure; conflict resolution/negotiation skills; team building and leadership skills. 40+ hours M-F; overtime as necessary to meet deadlines, travel, driving, occasional lifting/carrying up to 40 lbs. Site observations may involve outdoor weather, year-round, moving mechanical equipment, climbing ladders/scaffolding and observing high area construction activities. Noise level is often loud. Background check may be required. Requires use of hardhat, construction boots, and possibly other safety equipment as required on a construction site.

Are you looking for a company who believes in world-class employee culture and focuses on growing YOU professionally? Welcome to Donan Engineering, a leader in the property insurance intelligence industry. We are currently seeking a full-time professional Field Forensic Engineer with a background in Electrical Engineering to join our growing team in Albany, NY. The CTL Field Forensic Engineer I (FE-I) is primarily focused on the completion of forensic engineering projects which are assigned to them. They consistently ensure that the forensic projects conform to the standards of the firm, the commitment the firm has made to our clients, and within the monetary budget that has been assigned. This position will be responsible for several concurrent projects. The Forensic Engineer will report to a the CTL Engineering Manager. Our work is guided by our core values: * We do what we say we will do. * We respect and care for all. * We are focused on innovation. * We make hard things easy. * We are driven to achieve. * We are better together. To learn more, watch "What to Expect as a Donan Engineer" What Does Donan Offer You? * Competitive Compensation Package * Unlimited Compensatory Paid Time * Career Growth * A Diverse & Positive Work Environment * Professional Development * Generous Relocation Package Available * Employee Referral Bonus * License and Continuing Education Reimbursement * Medical, Vision, and Dental Insurance Coverage * 401K with Match * HSA and HRA (Employer contributions) * Paid Parental Leave * Company Paid Life Insurance * Company Paid Short-Term and Long-Term Disability * All Equipment Provided (company vehicle, laptop, etc.) * Tuition Reimbursement * Paid Time Off and Holidays Key Responsibilities Include: * Provides expert forensic analysis to our clients on an array of engineering projects. * Serve as an Engineer of Record for Associate Engineers. * Provides honest and unbiased analysis and consultation on various failures. * May be required to provide appraisals on structures and equipment as needed. * Must travel within the standard regional boundaries to which they are assigned. May be asked to travel to other regions to perform work as needed. * Must consistently meet or exceed the established performance metrics for this position. * Writes and submits detailed and accurate reports on completed projects in a timely manner in accordance with company guidelines. * Will communicate with Donan's customers to provide timelines and project updates on a consistent basis. * Must be willing and able to provide expert testimony and/or depositions as needed. * Must be willing to work a flexible schedule and additional hours during periods of peak business demand, and back-log as deemed necessary by management. * Will provide excellent customer service to both the company's internal and external customers. * For advancement, must be willing to pro-actively pursue additional training and mentoring opportunities, in addition to added education and/or certifications. * Other duties as assigned by management. Qualifications: * Applicants must be an active registered Professional Engineer (P.E.) in the state in which they are applying. Multiple active state P.E. licensures are highly preferred. * Must be willing to go through the process of obtaining additional state licensures in accordance with business demand and management discretion. All required fees associated with obtaining additional state licensures will typically be company paid. * Must have or be eligible to obtain the NCEES record in a reasonable amount of time. * Minimum of a bachelor's Degree in related Engineering field: civil, structural, electrical, or mechanical. * Previous forensic experience is highly preferred but not required. * Previous expert testimony or deposition experience highly preferred but not required. * Must be adaptable with the aptitude and willingness to learn new skills and techniques. * Must be extremely well organized with the ability to deliver fast and accurate turnaround times. * Must be able to handle multiple project workload and periods of high stress, especially during times of peak business demand. * Must complete a minimum of two hours annually of specialized litigation training. * Experience with hands on engineering such as structural/mechanical/electrical investigations etc., is highly preferred. * Must be hands on and willing to climb roofs, crawl in tight spaces, etc. * Will perform projects that are assigned to them unless sufficient hazards are identified utilizing Donan's Safety Protocol guidelines and JSA's. * Excellent written and verbal communication skills. * Must be team oriented and enjoy service-oriented type work. * Must have superior customer service skills. * Must meet or exceed company aptitude standards regarding overall computer and technical proficiency. * Must conduct business in an honest and ethical fashion at all times. * Experience with writing detailed reports is highly preferred. * Must have a valid driver's license with an acceptable driving record in accordance with the firm's guidelines. * Must have excellent overall computer skills. * Must be willing to travel and/or work a flexible schedule during periods of peak demand, or as directed by leadership. The nature of Donan's work requires travel and flexibility at times in order to meet the needs of our customers. * Must have the ability to work efficiently with little or no supervision. * Must have the willingness to work remotely and from home office. * Must be able to meet all standards for pre-employment physical examination. * Must have employee provided high speed internet that is reliable and accessible at remote office. Physical Requirements: * Frequently required to stand on one's feet for prolonged periods of time. * Frequently required to lift and/or move objects weighing 50-100 lbs. * Frequently required to climb onto first and second story roofs, ascend/descend ladders, stairs, scaffolding, ramps, etc. * Frequently required to balance, stoop, kneel, crouch, or crawl. * Frequently required to reach with hands and arms. * Frequently required to use hands to finger, handle, or feel. * Frequently required to drive a vehicle for extended periods of time. Related Experience: Civil Engineer, Design Engineer, Structural Engineer, Construction Management, Residential Construction, Residential Design. Internal Title: Forensic Engineer To learn more about us visit donan.com. Donan is committed to creating a diverse environment and is proud to be an equal opportunity employer. We are an E-Verify participating employer.

14237 - Capital Projects Electrical Engineer (remote) - Jupiter, FL Estimated Duration: 12+ months with possible extensions Work Setting: Remote. Only candidates able to relocate as required should apply to avoid removal from future consideration. Required: • Experience in US nuclear power plants (12+ years); • Experience with the applicable industry and nuclear standards, the nuclear industry standard design process, independent design verification, preparing stand-alone electrical calculations, preparing procurement specifications, and 10CFR50.59; • Experience with molded case circuit breakers, motor starters, thermal overloads, low voltage power breakers and switchgear, medium voltage power breakers and switchgear, industrial battery chargers, industrial inverters or UPS, 125Vdc battery systems, Emergency Diesel Generators (EDGs), large dry type or oil filled transformers, main generators, voltage regulators, etc; • Experience with power systems engineering, not with instrumentation and control, sensor technologies, analog or digital electronics, or cybersecurity: • Experience with preparing or reviewing/verifying design output documents (e.g., design changes, calculations, specifications) for internally developed design modifications. Preferred: • Experience with ladder logic, electrical schematics, NSCA/safe shutdown analysis (Appendix R/NFPA 805), power systems analysis (load flow, short circuit analysis, arc flash, coordination studies) as well as computational tools such as ETAP or EDISON; • Experience as a cognizant/oversight engineer or engineering project management; • Experience with Florida Power & Light nuclear power plants (Seabrook, Point Beach, St Lucie, Turkey Point). Responsibilities: • Serve as the technical interface with engineering firms during project development, ensuring designs align with industry standards, regulatory requirements, and nuclear design processes. • Prepare, review, and verify electrical engineering design output documents-including design changes, calculations, and specifications-for internally developed design modifications. • Apply nuclear industry standards, 10CFR50.59 requirements, and independent design verification practices to ensure safe, compliant, and high‑quality engineering deliverables. • Provide technical expertise on electrical distribution equipment and systems, including LV/MV breakers and switchgear, industrial power supplies, battery systems, EDGs, transformers, and generator systems. • Support and perform power systems engineering activities, such as load flow, short‑circuit, arc‑flash, and coordination studies, using tools like ETAP or EDISON where applicable. • Collaborate with project managers, oversight engineers, and cross‑functional stakeholders to support project execution, resolve technical issues, and maintain alignment between design intent and field implementation. •Contribute to safe‑shutdown, NSCA, and electrical schematic evaluations, identifying technical risks, validating design assumptions, and ensuring compliance with nuclear operational and safety requirements. Why apply? • Gain experience with one of the world's largest solar and wind energy providers, which last year briefly became the most valued U.S. energy company; • Work with a great team of professionals and learn newest technologies and approaches; • Enjoy our Client's wonderful campus with top-notch facilities for work and recreation; • Benefit from multiple projects extensions; • Receive support and advice from Vitaver consultants who are already working at our Client's site; • Get extra cash by participating in Vitaver Successful Completion Bonus Program; • Always get paid in full and on time.

Job DescriptionWe are representing a leading, industrial, full service engineering firm that is searching for an Electrical Field Engineer in the Greater Pittsburgh, PA area. Requirements: 4-year BS degree in Mechanical Engineering Technology or Mechanical Engineering. 2 to 20 years' experience in the industrial, mechanical field work. Experience and knowledge of heavy industrial mechanical systems such as mechanical drives, power transmission, bearings, equipment alignment, bolted connections, welding, wire ropes, sheaves, gearing, etc. The field engineer's core responsibility is to provide on-site technical supervision of the installation or repair of equipment and provide support for mechanical inspections, shop inspections, spare parts, and aftermarket. Ability to read and understand mechanical and structural detail drawings. Familiar with the use of technical measuring equipment and an understanding of manufacturing tolerances. Travel up to 60% for onsite job installations, inspections, field measuring, etc. Use of Microsoft Office applications such as Word, Excel, and Outlook.

Bala Consulting Engineers is a 200-person engineering firm headquartered just outside of Philadelphia in Wayne, PA with full-service offices in New York, NY, Boston, MA, Baltimore, MD, and Washington, DC. We are adding talented commissioning engineers with data center experience who will travel to client sites local to the Wayne, PA office and potentially throughout the US . This role joins a team of industry leading on-site commissioning/QA/QC electrical systems testing engineers. This world class team performs ‘hands-on' testing and provide technical oversight of electrical equipment and associated normal and standby power distribution systems. Oversight includes but is not limited to, electrical system(s) upgrades in existing facilities and new power systems testing (new construction) for fortune 500 companies throughout the U.S. Projects include data centers, trading floors, broadcast facilities, high rise infrastructure and high-end offices. Scope typically includes UPS, Generator, power generation / distribution and controls systems. It also includes predictive preventative maintenance program planning and execution, and systemic and component troubleshooting throughout the commissioning process. The ideal candidate will possess the following qualifications: Mid-level commissioning engineers (7+ years of experience) BS in Electrical Engineering (or similar qualification-required) Data Center Experience (required) Military background in electrical system's operation and repair is a plus Must be willing to travel across the U.S. for extended periods of time required to support project construction schedules and work various hours (days, night and weekends) Thermography Scanning Certification a plus Must have proficient technical writing skills (proposals, test scripts and reports) NETA Testing a plus EIT/PE/CPMP a plus SKM Power System Software experience a plus (i.e. Short Circuit Studies) Hardworking and well-motivated engineer with the desire to learn and solve problems Ability to work in the Wayne, PA office and perform work at client sites (new construction and existing facilities) as required Hold valid driver's license Background check & drug screening may be required by client for onsite projects What this opportunity entails: Perform commissioning and/or QA/QC hands on testing of electrical equipment. Manage Commissioning and Testing Projects (client, internal team and project financials) Lead projects and write proposals, test scripts and reports Mentor and train other Commissioning team members Coordinate invoicing with Accounting Department Attend conferences and networking events periodically National travel needed as necessary to complete Commissioning & Testing activities at client sites with reimbursement of expenses for travel/ lodging/car rental/meals. Bala is a dynamic growth-oriented company, built on relationships with our clients, staff, and industry partners. At Bala you will enjoy an exceptional employee experience that results in a successful career based on collaboration, leadership and personal development. As a multi-discipline engineering firm, Bala is a leader in innovative designs for building systems in High Rise, Mission Critical, Multi-Unit Housing, Commercial Office, Higher Education, Transportation, Adaptive Reuse and Life Science facilities. Bala offers comprehensive benefits: Medical, Dental, and Vision insurance package 401(k) with employer match Employer Paid Life Insurance Up to (5) weeks of PTO based on years of experience and (8) paid holidays 8 hours of Volunteer Time Off Tuition and Licensure Reimbursement Federal Student Loan Assistance including match up to $5,250 per year Section 529 Plan (College Saving Plan) Employee Referral Program Full-time onsite roles qualify for one day remote work Follow us @balaconsultingengineers on Instagram and LinkedIn Accepting resumes from candidates only. Agencies must obtain advance written approval from Bala Consulting Engineer's HR/Recruiting Department to submit resumes. This approval must be in the form of a valid fully executed contract for service as well as a request to submit candidates to a specific job opening. Bala Consulting Engineers will not pay a fee to any Agency that does not have such an agreement in place, or for positions for which candidates have not been specifically requested. #LI-Onsite

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Are you a skilled electrical engineer with a passion for delivering high-quality infrastructure solutions? We're seeking a Senior Project Engineer to join our Northeast Electrical Engineering team and take a leading role in the design and execution of critical facilities and infrastructure projects throughout the Northeast. In this role, you'll lead projects through the full lifecycle-from planning and design to construction support-while mentoring junior engineers and fostering strong client relationships. You'll bring deep technical expertise in electrical engineering design and a collaborative mindset to help deliver innovative, sustainable, and cost-effective solutions. With the opportunity to work on transformative projects, our team is growing rapidly-and so are the opportunities. You'll step into a role with clear pathways for advancement, the chance to shape the future of our team, and the support, visibility, and resources to take your career wherever you want it to go. Position Responsibilities Project Leadership: Oversee the entire project lifecycle, from initial concept development through construction and closeout. Provide technical leadership and ensure quality and efficiency at every stage. Design Expertise: Apply advanced knowledge in transportation design to develop creative, efficient solutions for roadway and infrastructure projects. Prepare design reports, plans, specifications, and bid documents. Team Development: Mentor and support junior engineers, sharing technical knowledge and project management best practices. Foster a collaborative, growth-oriented team culture. Client Collaboration: Build and maintain strong relationships with clients. Understand their goals and expectations to deliver solutions that exceed requirements and build long-term trust. Skills, Education & Experience Bachelor's of Science or Technology degree in electrical engineering. Licensed Professional Engineer (PE) in New York State. Minimum 8 years of experience in electrical engineering design, with a strong focus on Public and Private facilities infrastructure projects. Proficiency in AutoCAD and Revit. Experience with Power Systems Analysis, including Short Circuit, Coordination and Arc Flash analysis. Proficiency with the National Electric Code. Experience with the layout and design of medium and low voltage distribution systems. Experience with the layout and design of lighting systems and controls. Strong communication and interpersonal skills, with the ability to lead teams and collaborate effectively with clients and stakeholders Compensation and Benefits: Estimated Salary Range: $95,472 - $130,640/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Location: Ft. Lauderdale, FL Type: Full Time Min. Experience: Mid-Level Salary Range: $105,000-$125,000 USD per year Advanced Technology & Research Corporation (**************** is seeking to fill the following full-time permanent position. Based in Maryland and incorporated in 1973, ATR is an equal-opportunity engineering company with a solid reputation in various engineering disciplines for the government and Fortune 500 commercial customers. Salary for the position is competitive according to qualifications. ATR offers an attractive comprehensive benefits package, including Medical/Dental insurance, free basic life/ADD, and long-term and short-term disability insurances, 401(k) plan, educational assistance program, and paid time off. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability or veteran status. PRINCIPAL DUTIES & RESPONSIBILITIES: The successful applicant will join ATR's Engineering Services Division, working as an Electronics Hardware Engineer at the NAVSEA Warfare Center South Florida Ocean Measurement Facility (SFOMF), Ft Lauderdale, FL. The candidate will support SFOMF on various projects, tests and operations associated with the U.S. Navy's research, development, test, and evaluation programs. This consists of working as a technical team member at the government site to perform design, maintenance, and troubleshooting of circuits and execute board level repairs in support of the design, deployment, operation, and data reduction of advanced sensors and associated systems. The candidate shall also test, splice, and repair Fiber Optic cables and connectors of shore side and in-water systems. EDUCATION & EXPERIENCE REQUIREMENTS: Minimum B.S. degree in Electrical Engineering 3-5 years of experience as a hardware design engineer Previous Electronics Technician training and experience is preferred Job experience with the military or other DoD organizations is preferred SKILLS & ABILITIES REQUIREMENTS: Experience in analog & digital circuit design. Must be able to troubleshoot existing circuits and execute board level repairs as needed Experience with test equipment such as oscilloscopes, logic analyzers, time-domain reflectometers, DVM, megohmmeters, function generators, etc. Experience with analog to digital conversion requirements such as alias filtering and system noise at the bit level Experience with interpretation of FFT results and utilization of software tools in LabVIEW or MATLAB to generate engineering scaled signals Experience with Fiber Optic cable testing, splicing, and repair Rudimentary soldering skills for PCB and connector repair Rudimentary wiring skills for cable splicing and repair Experience with grounding, bonding and shielding Experience with MATLAB, LabVIEW, Power Point, MS Word & Excel A self-starter able to work on tasks individually or as part of a small technical team Demonstrated ability to communicate, both orally and in writing OTHER REQUIREMENTS: Candidate must be a US citizen with the ability to obtain and maintain a security clearance or favorable adjudication of a national security background investigation. Current successful background investigation completion is a plus. Qualified Candidates should send their resume to [email protected]

Job DescriptionElectronics Hardware Engineer Location: Ft. Lauderdale, FL Type: Full Time Min. Experience: Mid-Level Salary Range: $105,000-$125,000 USD per year Advanced Technology & Research Corporation (**************** is seeking to fill the following full-time permanent position. Based in Maryland and incorporated in 1973, ATR is an equal-opportunity engineering company with a solid reputation in various engineering disciplines for the government and Fortune 500 commercial customers. Salary for the position is competitive according to qualifications. ATR offers an attractive comprehensive benefits package, including Medical/Dental insurance, free basic life/ADD, and long-term and short-term disability insurances, 401(k) plan, educational assistance program, and paid time off. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability or veteran status. PRINCIPAL DUTIES & RESPONSIBILITIES: The successful applicant will join ATR's Engineering Services Division, working as an Electronics Hardware Engineer at the NAVSEA Warfare Center South Florida Ocean Measurement Facility (SFOMF), Ft Lauderdale, FL. The candidate will support SFOMF on various projects, tests and operations associated with the U.S. Navy's research, development, test, and evaluation programs. This consists of working as a technical team member at the government site to perform design, maintenance, and troubleshooting of circuits and execute board level repairs in support of the design, deployment, operation, and data reduction of advanced sensors and associated systems. The candidate shall also test, splice, and repair Fiber Optic cables and connectors of shore side and in-water systems. EDUCATION & EXPERIENCE REQUIREMENTS: Minimum B.S. degree in Electrical Engineering 3-5 years of experience as a hardware design engineer Previous Electronics Technician training and experience is preferred Job experience with the military or other DoD organizations is preferred SKILLS & ABILITIES REQUIREMENTS: Experience in analog & digital circuit design. Must be able to troubleshoot existing circuits and execute board level repairs as needed Experience with test equipment such as oscilloscopes, logic analyzers, time-domain reflectometers, DVM, megohmmeters, function generators, etc. Experience with analog to digital conversion requirements such as alias filtering and system noise at the bit level Experience with interpretation of FFT results and utilization of software tools in LabVIEW or MATLAB to generate engineering scaled signals Experience with Fiber Optic cable testing, splicing, and repair Rudimentary soldering skills for PCB and connector repair Rudimentary wiring skills for cable splicing and repair Experience with grounding, bonding and shielding Experience with MATLAB, LabVIEW, Power Point, MS Word & Excel A self-starter able to work on tasks individually or as part of a small technical team Demonstrated ability to communicate, both orally and in writing OTHER REQUIREMENTS: Candidate must be a US citizen with the ability to obtain and maintain a security clearance or favorable adjudication of a national security background investigation. Current successful background investigation completion is a plus. Qualified Candidates should send their resume to ******************** Powered by JazzHR 4HnzB9OQV4