Quality Analyst jobs at Lockheed Martin - 44 jobs

Reports to the Hybrid Electric Systems Test Manager and is the accountable owner for the mechanical scope of test-enabling hardware (TEH). Owns requirements definition through design oversight and commissioning readiness: ensuring the right processes and analyses are completed by partners, approving mechanical design packages, leading reviews, and supporting installation/commissioning. Focus areas include brackets and mounting solutions, dynamic test rig/fixture structures, guarding and access, and thermal/lube support systems. Operates as a doer/leader: executes hands-on where appropriate, or delegates and manages delivery through internal groups and suppliers. Collaborates with hybrid mechanical/electrical component teams, test teams, dynamics/analysis, and the Test Hardware Logistics & Asset Lead (who owns procurement, delivery, and lifecycle). This role is essential towards the safe and effective execution of GE's suite of ground and flight technology demonstrator vehicles. These demonstrator vehicles serve as foundational platforms for maturing hybrid electric and other technologies central to the realization of the aviation industry's sustainability goals in the first half of the 21st century. **Job Description** **Roles and Responsibilities** + Translate test needs into mechanical requirements, interface definitions, and acceptance criteria; maintain traceability to verification evidence + Lead mechanical design reviews; ensure guarding, ergonomics, containment, lifting/rigging, and access are addressed + Specify and verify required analyses (loads, vibration, thermal, tolerance/fit; hand calcs or FEA as applicable); ensure evidence packages are complete and reviewable + Approve mechanical design packages (models, drawings, BOMs) and own configuration-controlled mechanical documentation + Lead assembly and commissioning readiness (alignment, interfaces, fasteners/torque, clearances); capture lessons learned + Identify and mitigate mechanical risks; escalate schedule/cost/scope tradeoffs + Partner with the Logistics & Asset Lead on sourcing plans, lead times, kitting needs, and configuration-controlled substitutions + Champion design for safety + This position is based in Evendale, OH but will require frequent trips to GE's EPIS Center facility located in Dayton, OH. Additional travel may be needed to other hybrid test locations, as required by program needs. + Additionally, you will be responsible to continually mature your personal and professional development through training opportunities, mentorship, and formal career path definition. **Required Qualifications** + Bachelor's degree in Mechanical Engineering (or related) from an accredited institution + 3 years of experience managing mechanical design efforts for test rigs or industrial equipment + Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. **Desired Characteristics** + Experience leading design reviews and approvals for mounts/fixtures, rig structures, and fluid systems; GD&T and manufacturing readiness + Experience specifying/reviewing mechanical analyses and verifying evidence packages + Configuration control and engineering change processes experience + Safety-first mindset + Supplier/fabrication oversight; practical knowledge of machining, weldments, hose/pipe assemblies, fabrication, and assembly processes + Clear, concise communicator; drives cross-functional alignment and timely decisions + Project planning and risk management; comfortable operating in fast-moving and ambiguous test environment _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Reports to the Hybrid Electric Systems Test Manager and is the accountable owner for procurement, logistics, and end-to-end asset lifecycle of test-enabling hardware (TEH). Places direct and indirect requisitions and manages appropriate P‑card to support test operations; designs, launches, and operates a lightweight inventory system; manages shipping and deployment between sites; runs calibration schedules for instrumentation, DAQ, and test/measurement tools; and maintains configuration control so assets are available to support test schedules. Converts demand signals from Test Leads and hardware design owners into on-time, right‑first‑time readiness, adopting proven GE tools where available and creating practical processes where gaps exist. This role is essential towards the safe and effective execution of GE's suite of ground and flight technology demonstrator vehicles. These demonstrator vehicles serve as foundational platforms for maturing hybrid electric and other technologies central to the realization of the aviation industry's sustainability goals in the first half of the 21st century. **Job Description** **Roles and Responsibilities** + Translate test schedules into clear demand signals (items, quantities, need dates) from Test Leads and hardware owners; allocate shared assets across sites, communicate reuse vs. buy‑additional, and resolve conflicts to protect schedule + Build procurement plans aligned to test windows; issue direct and indirect requisitions, execute P‑card buys as appropriate; track PO status, lead times, and recovery actions + Create and operate a simple, reliable inventory and serialization system for Hybrid TEH assets with accurate location and custody traceability + Plan and execute kitting; verify kit completeness and configuration correctness to enable seamless test installations + Coordinate with calibration labs to establish and manage calibration schedules for instrumentation, DAQ, and test/measurement tools + Develop and present a weekly readiness dashboard for leadership and stakeholders covering availability, delivery milestones, calibration status, risks, and mitigation actions + Uphold safety and quality in asset movement, storage, and staging **Required Qualifications** + Bachelor's degree from an accredited university or college + Minimum of 3 years of experience in technical supply chain/logistics managing procurement and inventory for industrial/aerospace/automotive hardware + On‑site in Evendale, OH; ability to travel regularly to Dayton, OH (GE EPISCenter) and infrequently to suppliers as needed + Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. **Desired Characteristics** + Relevant exposure to manufacturing/tool/software/design; comfortable with kitting, serialization, and traceability + Self‑starter with strong problem solving; builds lightweight processes and drives solutions + Highly motivated with exceptional communication transparency + Basic understanding of fabrication, manufacturing, and assembly methods; comfortable in shop environments + Collaborative and resourceful; partners across lab maintenance and operations to unblock issues and keep tests on track + Proficient with Excel/Smartsheet; comfortable building simple tools, workflows, and dashboards _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

SummaryThe Hybrid Electric Systems Test Lead will report to the Hybrid Electric Systems Test Manager and will be responsible for planning and executing hybrid electric system tests end-to-end. The individual will serve as the prime responsible for test preparation and conduct, ensuring safe, well-managed, and well-communicated test operation. The Test Lead partners closely with Hybrid Systems Engineering and test site operators/technicians to define the test mission, coordinate instrumentation/assembly/execution with specialists, and deliver high-quality data and insights that accelerate maturation of hybrid electric technologies. This role is essential towards the safe and effective execution of GE Aerospace's suite of ground and flight technology demonstrator vehicles. These demonstrator vehicles serve as foundational platforms for maturing hybrid electric and other technologies central to the realization of the aviation industry's sustainability goals in the first half of the 21st century.Job Description Roles and Responsibilities Lead readiness and execution of assigned tests; coordinate on-site and remote teams to protect safety, schedule, and data quality Develop and maintain test plans and procedures (objectives, success criteria, instrumentation, test points, and reporting needs) Coordinate test requests with systems and design teams; align execution to evolving program needs and configuration readiness Coordinate instrumentation, assembly, and test execution with specialists across TEH, Test Systems, and site operators/technicians Build and sustain a strong support network across sites and engineering teams to enable execution in distributed environments Leverage and maintain standard operating procedures; apply GE best practices to improve efficiency and repeatability Provide clear, timely communication of readiness status, risks, outcomes, and team needs Prepare for, participate in, and document test results (data packages, logs, anomalies, and reports) Present results to internal and external customers as needed Support test integration across environments from desktop simulations to representative system demonstrations Capture lessons learned and best practices to improve future test execution Collaborate effectively in a diverse, global, distributed work environment Additionally, you will be responsible to continually mature your personal and professional development through training opportunities, mentorship, and formal career path definition. Required Qualifications Bachelor's degree in engineering from an accredited college or university Minimum 8 years of experience in test operations, systems test, validation/verification, or system integration for aerospace, automotive, energy, or industrial systems Willingness and ability to work on-site at Dayton, OH (GE EPISCenter) and/or Evendale, OH, with travel to other test sites as program needs require Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Desired Characteristics Highly-motivated, self-starting, and passionate Demonstrated team leadership, collaboration, and facilitation skills Exceptional communication skills and willingness to continually improve communication and influencing skills in distributed work environments Experience with test instrumentation (integration, application, and monitoring) Experience with project management tools (MS Project, Open Plan, etc.) Knowledge of power electronics and energy storage Knowledge of mechanics/dynamics, thermodynamics, and heat transfer This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

SummaryReports to the Hybrid Electric Systems Test Manager and is the accountable owner for procurement, logistics, and end-to-end asset lifecycle of test-enabling hardware (TEH). Places direct and indirect requisitions and manages appropriate P‑card to support test operations; designs, launches, and operates a lightweight inventory system; manages shipping and deployment between sites; runs calibration schedules for instrumentation, DAQ, and test/measurement tools; and maintains configuration control so assets are available to support test schedules. Converts demand signals from Test Leads and hardware design owners into on-time, right‑first‑time readiness, adopting proven GE tools where available and creating practical processes where gaps exist. This role is essential towards the safe and effective execution of GE's suite of ground and flight technology demonstrator vehicles. These demonstrator vehicles serve as foundational platforms for maturing hybrid electric and other technologies central to the realization of the aviation industry's sustainability goals in the first half of the 21st century.Job Description Roles and Responsibilities Translate test schedules into clear demand signals (items, quantities, need dates) from Test Leads and hardware owners; allocate shared assets across sites, communicate reuse vs. buy‑additional, and resolve conflicts to protect schedule Build procurement plans aligned to test windows; issue direct and indirect requisitions, execute P‑card buys as appropriate; track PO status, lead times, and recovery actions Create and operate a simple, reliable inventory and serialization system for Hybrid TEH assets with accurate location and custody traceability Plan and execute kitting; verify kit completeness and configuration correctness to enable seamless test installations Coordinate with calibration labs to establish and manage calibration schedules for instrumentation, DAQ, and test/measurement tools Develop and present a weekly readiness dashboard for leadership and stakeholders covering availability, delivery milestones, calibration status, risks, and mitigation actions Uphold safety and quality in asset movement, storage, and staging Required Qualifications Bachelor's degree from an accredited university or college Minimum of 3 years of experience in technical supply chain/logistics managing procurement and inventory for industrial/aerospace/automotive hardware On‑site in Evendale, OH; ability to travel regularly to Dayton, OH (GE EPISCenter) and infrequently to suppliers as needed Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Desired Characteristics Relevant exposure to manufacturing/tool/software/design; comfortable with kitting, serialization, and traceability Self‑starter with strong problem solving; builds lightweight processes and drives solutions Highly motivated with exceptional communication transparency Basic understanding of fabrication, manufacturing, and assembly methods; comfortable in shop environments Collaborative and resourceful; partners across lab maintenance and operations to unblock issues and keep tests on track Proficient with Excel/Smartsheet; comfortable building simple tools, workflows, and dashboards This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

SummaryReports to the Hybrid Electric Systems Test Manager and is the accountable owner for the mechanical scope of test-enabling hardware (TEH). Owns requirements definition through design oversight and commissioning readiness: ensuring the right processes and analyses are completed by partners, approving mechanical design packages, leading reviews, and supporting installation/commissioning. Focus areas include brackets and mounting solutions, dynamic test rig/fixture structures, guarding and access, and thermal/lube support systems. Operates as a doer/leader: executes hands-on where appropriate, or delegates and manages delivery through internal groups and suppliers. Collaborates with hybrid mechanical/electrical component teams, test teams, dynamics/analysis, and the Test Hardware Logistics & Asset Lead (who owns procurement, delivery, and lifecycle). This role is essential towards the safe and effective execution of GE's suite of ground and flight technology demonstrator vehicles. These demonstrator vehicles serve as foundational platforms for maturing hybrid electric and other technologies central to the realization of the aviation industry's sustainability goals in the first half of the 21st century.Job Description Roles and Responsibilities Translate test needs into mechanical requirements, interface definitions, and acceptance criteria; maintain traceability to verification evidence Lead mechanical design reviews; ensure guarding, ergonomics, containment, lifting/rigging, and access are addressed Specify and verify required analyses (loads, vibration, thermal, tolerance/fit; hand calcs or FEA as applicable); ensure evidence packages are complete and reviewable Approve mechanical design packages (models, drawings, BOMs) and own configuration-controlled mechanical documentation Lead assembly and commissioning readiness (alignment, interfaces, fasteners/torque, clearances); capture lessons learned Identify and mitigate mechanical risks; escalate schedule/cost/scope tradeoffs Partner with the Logistics & Asset Lead on sourcing plans, lead times, kitting needs, and configuration-controlled substitutions Champion design for safety This position is based in Evendale, OH but will require frequent trips to GE's EPIS Center facility located in Dayton, OH. Additional travel may be needed to other hybrid test locations, as required by program needs. Additionally, you will be responsible to continually mature your personal and professional development through training opportunities, mentorship, and formal career path definition. Required Qualifications Bachelor's degree in Mechanical Engineering (or related) from an accredited institution 3 years of experience managing mechanical design efforts for test rigs or industrial equipment Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Desired Characteristics Experience leading design reviews and approvals for mounts/fixtures, rig structures, and fluid systems; GD&T and manufacturing readiness Experience specifying/reviewing mechanical analyses and verifying evidence packages Configuration control and engineering change processes experience Safety-first mindset Supplier/fabrication oversight; practical knowledge of machining, weldments, hose/pipe assemblies, fabrication, and assembly processes Clear, concise communicator; drives cross-functional alignment and timely decisions Project planning and risk management; comfortable operating in fast-moving and ambiguous test environment This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Summary of Primary Functions We are seeking a dynamic and results-driven Business Analyst III/IV to join our growing team. This role will serve as a strategic liaison between business units and technical/data teams, ensuring that the credit union's operational needs, member experience goals, and strategic objectives are translated into actionable, data-driven solutions. The ideal candidate will bring years of hands-on experience in credit union lending and deposit operations, with a deep understanding of how these functions work, what drives their success, and how they are measured. You should be able to quickly grasp the goals and metrics critical to these areas and use that knowledge to inform and influence strategic and operational decisions. You'll play a critical role in analyzing product and departmental performance, creating process maps, developing business plans, and delivering high-quality data visualizations and presentations. Skills and Abilities Bachelor's degree in business, Finance, Data Analytics, Information Systems, or a related field. Master's degree preferred. 8+ years of experience in lending and deposit operations within a credit union or similar financial institution is preferred. 10+ years of experience in business analysis, preferably in financial services or credit unions. Strong understanding of credit union product lines, operational workflows, and performance metrics. Knowledgeable in SQL, with strong hands-on experience in data querying and manipulation. Skills in Tableau or Power BI for creating dashboards and interactive reports. Strong understanding of business process mapping and optimization techniques. Exceptional written and verbal communication skills, with the ability to present data-driven insights to non-technical audiences. Experience developing KPIs, analyzing campaigns, and supporting cross-functional teams with actionable strategies. Detail-oriented, analytical thinker with a strategic mindset and proactive approach to problem-solving. Duties and Responsibilities Stakeholder Engagement & Requirements Gathering: Collaborate with internal teams to collect, analyze, and document business requirements to ensure seamless execution of strategic initiatives. Performance Analysis: Evaluate department and product-specific performance; develop KPIs and dashboards with minimal oversight to monitor business health, particularly in lending and deposit operations. Program & Campaign Optimization: Analyze program performance (e.g., member referral programs) and make recommendations for improvement based on profitability and effectiveness. Growth Strategy Support: Recommend KPIs, metrics, and data models to support growth strategies, especially within lending and deposit portfolios. Process Mapping: Document and map out current-state and future-state business processes to identify opportunities for efficiency and improvement. Business Planning: Partner with internal departments, especially Lending and Deposit Operations to generate actionable business plans and strategies that support operational and growth objectives. Data Visualization & Reporting: Create insightful dashboards and visual reports using tools like Oracle BI, Tableau or Power BI. SQL & Data Interpretation: Use SQL to query data from various systems and interpret complex data sets to generate clear, strategic insights. Member Engagement Analysis: Support the evaluation of member behavior, retention, and engagement to inform experience and outreach initiatives. NGFCU offers competitive compensation and a rich benefits package including medical, dental, vision, disability and life insurance, and a 401(k)-profit sharing plan with employer matching. Compensation and Job Title is commensurate with experience and may fall under the following pay ranges: Business Analyst III - $68,700 to $103,050 Annually Business Analyst IV- $77,289 to $115,934 Annually Please note that the salary information is a general guideline only. Northrop Grumman Federal Credit Union considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market and business considerations when extending an offer. We offer a competitive total rewards package including a wide range of medical, dental, vision, financial, and other benefits. We perform thorough background checks including verification of previous employment, education, credit checks and pre-employment drug screening. Any discrepancies in reported dates, titles, or degree information may result in an employment offer to be withdrawn. NGFCU is an Equal Opportunity Employer Pursuant to the Los Angeles Fair Chance Ordinance, we will consider for employment-qualified applicants with arrest and conviction records.

The Military Maintenance & Sustainment Test Leader will lead the development and implementation of strategies to plan and execute GE Aerospace Edison Works propulsion system test support capabilities. This role encompasses all aspects of maintenance, logistics and sustainment activities required to ensure seamless engine testing operations within an Integrated Product Support (IPS) framework. You will play a critical role in identifying and mitigating maintenance and sustainment-related disruptions to engine testing and test campaigns. The ideal candidate is motivated self-starter who excels in dynamic, fast paced environments. **Job Description** **Roles and Responsibilities** + Identify maintenance and sustainment requirements and strategies to enable military propulsion system testing and test campaigns + Develop detailed maintenance and sustainment technical planning which accounts for cost, schedule, and technical execution + Establish and lead Integrated Product Teams (IPTs) and working groups with internal and external (airframe integrators, military personnel) stakeholders + Lead the authoring of deliverables and technical documents which captures GE Aerospace's approach to fulfilling maintenance and sustainment requirements + Lead the identification of, and monitor the procurement of spare parts required to ensure test campaigns continue uninterrupted + Support the hiring, training, and deployment of Field Service Representatives (FSRs) who will either directly or indirectly report to this position + Support the identification of unique maintenance facility requirements required to enable test objectives + Support the identification of training requirements and the authoring of training related to propulsion system maintenance + Collaborate with the Technical Publications IPT to ensure all technical data is authored and published to support test maintenance activities + Collaborate with the Support Equipment IPT to ensure all support equipment is designed, qualified, and delivered to support test maintenance activities + Work cross-functionally with Maintainability, Reliability, Safety, Supportability, and Human Factors engineers + Partner with the Systems Engineering Test Leader to support engine testing + Provide oversight of and report the status of propulsion system during testing + Performs daily, weekly, and monthly management utilizing GE Aerospace's FLIGHT DECK principles to drive team progress and achieve defined program milestones and objectives **Required Qualifications** + Bachelor's Degree from an accredited university or college + Minimum of 5 years of Identifying maintenance and sustainment requirements and strategies to enable military propulsion system testing and test campaigns. + Familiarity of U.S. military organizations, maintenance and sustainment processes and procedures, and the DoD's IPS elements + Familiarity with turbine engine systems and demonstrated knowledge of logistics and sustainment processes for military turbine engines + Familiarity with military aircraft, engine, or aerospace testing requirements and processes + Minimum of 8 years of experience related to the role responsibilities + Minimum of 6 years of military or DoD related industry experience + Minimum of 4 years of relevant propulsion system experience + Ability to work full-time, on-site at GE Aerospace headquarters in Cincinnati, OH; due to security requirements there are very limited work from home or remote opportunities + Ability to travel to customer sites as needed (estimated 10% travel requirement) + This role is restricted to U.S. Citizens + Must have or qualify for a U.S. Government Secret Clearance + This role is restricted to U.S. persons (i.e., U.S. citizens, permanent residents, and other protected individuals under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)) due to access to export-controlled technology. GE will require proof of status prior to employment. **Desired Characteristics** + Master's degree from an accredited college or university + Direct experience working with, or for the U.S. military in the maintenance, operation, testing, or sustainment of aircraft or propulsion systems + Prior military experience as a maintenance officer or enlisted aircraft maintenance technician (tactical aircraft maintenance and aerospace propulsion highly desired) + Experience with maintenance or sustainment of 5th generation military aircraft, such as the F-22 or F-35 + Experience in either developmental or operational testing of military systems, including Integrated Test & Evaluation (IT&E) and Initial Operational Test & Evaluation (IOT&E) + Humble: respectful, receptive, agile, eager to learn + Transparent: shares critical information, speaks with candor, contributes constructively + Focused: quick learner, strategically prioritizes work, committed + Leadership ability: strong communicator, decision-maker, collaborative + Problem solver: analytical-minded, challenges existing processes, critical thinker + Demonstrated ability to interface and communicate effectively with all levels of the organization and external customers + Demonstrated ability to analyze and resolve complex problems + Demonstrated ability to lead programs / projects + Active U.S. Government Secret or Top-Secret Clearance _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

The Military Maintenance & Sustainment Test Leader will lead the development and implementation of strategies to plan and execute GE Aerospace Edison Works propulsion system test support capabilities. This role encompasses all aspects of maintenance, logistics and sustainment activities required to ensure seamless engine testing operations within an Integrated Product Support (IPS) framework. You will play a critical role in identifying and mitigating maintenance and sustainment-related disruptions to engine testing and test campaigns. The ideal candidate is motivated self-starter who excels in dynamic, fast paced environments. Job Description Roles and Responsibilities * Identify maintenance and sustainment requirements and strategies to enable military propulsion system testing and test campaigns * Develop detailed maintenance and sustainment technical planning which accounts for cost, schedule, and technical execution * Establish and lead Integrated Product Teams (IPTs) and working groups with internal and external (airframe integrators, military personnel) stakeholders * Lead the authoring of deliverables and technical documents which captures GE Aerospace's approach to fulfilling maintenance and sustainment requirements * Lead the identification of, and monitor the procurement of spare parts required to ensure test campaigns continue uninterrupted * Support the hiring, training, and deployment of Field Service Representatives (FSRs) who will either directly or indirectly report to this position * Support the identification of unique maintenance facility requirements required to enable test objectives * Support the identification of training requirements and the authoring of training related to propulsion system maintenance * Collaborate with the Technical Publications IPT to ensure all technical data is authored and published to support test maintenance activities * Collaborate with the Support Equipment IPT to ensure all support equipment is designed, qualified, and delivered to support test maintenance activities * Work cross-functionally with Maintainability, Reliability, Safety, Supportability, and Human Factors engineers * Partner with the Systems Engineering Test Leader to support engine testing * Provide oversight of and report the status of propulsion system during testing * Performs daily, weekly, and monthly management utilizing GE Aerospace's FLIGHT DECK principles to drive team progress and achieve defined program milestones and objectives Required Qualifications * Bachelor's Degree from an accredited university or college + Minimum of 5 years of Identifying maintenance and sustainment requirements and strategies to enable military propulsion system testing and test campaigns. * Familiarity of U.S. military organizations, maintenance and sustainment processes and procedures, and the DoD's IPS elements * Familiarity with turbine engine systems and demonstrated knowledge of logistics and sustainment processes for military turbine engines * Familiarity with military aircraft, engine, or aerospace testing requirements and processes * Minimum of 8 years of experience related to the role responsibilities * Minimum of 6 years of military or DoD related industry experience * Minimum of 4 years of relevant propulsion system experience * Ability to work full-time, on-site at GE Aerospace headquarters in Cincinnati, OH; due to security requirements there are very limited work from home or remote opportunities * Ability to travel to customer sites as needed (estimated 10% travel requirement) * This role is restricted to U.S. Citizens * Must have or qualify for a U.S. Government Secret Clearance * This role is restricted to U.S. persons (i.e., U.S. citizens, permanent residents, and other protected individuals under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)) due to access to export-controlled technology. GE will require proof of status prior to employment. Desired Characteristics * Master's degree from an accredited college or university * Direct experience working with, or for the U.S. military in the maintenance, operation, testing, or sustainment of aircraft or propulsion systems * Prior military experience as a maintenance officer or enlisted aircraft maintenance technician (tactical aircraft maintenance and aerospace propulsion highly desired) * Experience with maintenance or sustainment of 5th generation military aircraft, such as the F-22 or F-35 * Experience in either developmental or operational testing of military systems, including Integrated Test & Evaluation (IT&E) and Initial Operational Test & Evaluation (IOT&E) * Humble: respectful, receptive, agile, eager to learn * Transparent: shares critical information, speaks with candor, contributes constructively * Focused: quick learner, strategically prioritizes work, committed * Leadership ability: strong communicator, decision-maker, collaborative * Problem solver: analytical-minded, challenges existing processes, critical thinker * Demonstrated ability to interface and communicate effectively with all levels of the organization and external customers * Demonstrated ability to analyze and resolve complex problems * Demonstrated ability to lead programs / projects * Active U.S. Government Secret or Top-Secret Clearance This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

SummaryThe Military Maintenance & Sustainment Test Leader will lead the development and implementation of strategies to plan and execute GE Aerospace Edison Works propulsion system test support capabilities. This role encompasses all aspects of maintenance, logistics and sustainment activities required to ensure seamless engine testing operations within an Integrated Product Support (IPS) framework. You will play a critical role in identifying and mitigating maintenance and sustainment-related disruptions to engine testing and test campaigns. The ideal candidate is motivated self-starter who excels in dynamic, fast paced environments.Job Description Roles and Responsibilities Identify maintenance and sustainment requirements and strategies to enable military propulsion system testing and test campaigns Develop detailed maintenance and sustainment technical planning which accounts for cost, schedule, and technical execution Establish and lead Integrated Product Teams (IPTs) and working groups with internal and external (airframe integrators, military personnel) stakeholders Lead the authoring of deliverables and technical documents which captures GE Aerospace's approach to fulfilling maintenance and sustainment requirements Lead the identification of, and monitor the procurement of spare parts required to ensure test campaigns continue uninterrupted Support the hiring, training, and deployment of Field Service Representatives (FSRs) who will either directly or indirectly report to this position Support the identification of unique maintenance facility requirements required to enable test objectives Support the identification of training requirements and the authoring of training related to propulsion system maintenance Collaborate with the Technical Publications IPT to ensure all technical data is authored and published to support test maintenance activities Collaborate with the Support Equipment IPT to ensure all support equipment is designed, qualified, and delivered to support test maintenance activities Work cross-functionally with Maintainability, Reliability, Safety, Supportability, and Human Factors engineers Partner with the Systems Engineering Test Leader to support engine testing Provide oversight of and report the status of propulsion system during testing Performs daily, weekly, and monthly management utilizing GE Aerospace's FLIGHT DECK principles to drive team progress and achieve defined program milestones and objectives Required Qualifications Bachelor's Degree from an accredited university or college + Minimum of 5 years of Identifying maintenance and sustainment requirements and strategies to enable military propulsion system testing and test campaigns. Familiarity of U.S. military organizations, maintenance and sustainment processes and procedures, and the DoD's IPS elements Familiarity with turbine engine systems and demonstrated knowledge of logistics and sustainment processes for military turbine engines Familiarity with military aircraft, engine, or aerospace testing requirements and processes Minimum of 8 years of experience related to the role responsibilities Minimum of 6 years of military or DoD related industry experience Minimum of 4 years of relevant propulsion system experience Ability to work full-time, on-site at GE Aerospace headquarters in Cincinnati, OH; due to security requirements there are very limited work from home or remote opportunities Ability to travel to customer sites as needed (estimated 10% travel requirement) This role is restricted to U.S. Citizens Must have or qualify for a U.S. Government Secret Clearance This role is restricted to U.S. persons (i.e., U.S. citizens, permanent residents, and other protected individuals under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)) due to access to export-controlled technology. GE will require proof of status prior to employment. Desired Characteristics Master's degree from an accredited college or university Direct experience working with, or for the U.S. military in the maintenance, operation, testing, or sustainment of aircraft or propulsion systems Prior military experience as a maintenance officer or enlisted aircraft maintenance technician (tactical aircraft maintenance and aerospace propulsion highly desired) Experience with maintenance or sustainment of 5th generation military aircraft, such as the F-22 or F-35 Experience in either developmental or operational testing of military systems, including Integrated Test & Evaluation (IT&E) and Initial Operational Test & Evaluation (IOT&E) Humble: respectful, receptive, agile, eager to learn Transparent: shares critical information, speaks with candor, contributes constructively Focused: quick learner, strategically prioritizes work, committed Leadership ability: strong communicator, decision-maker, collaborative Problem solver: analytical-minded, challenges existing processes, critical thinker Demonstrated ability to interface and communicate effectively with all levels of the organization and external customers Demonstrated ability to analyze and resolve complex problems Demonstrated ability to lead programs / projects Active U.S. Government Secret or Top-Secret Clearance This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

About the role As a Sr.QA Automation Specialist - HealthCare EDI Transactions & API Testing, you will make an impact by designing and executing automated testing strategies for healthcare applications, ensuring high-quality delivery across platforms. You will be a valued member of the Quality Engineering & Assurance team and work collaboratively with cross-functional teams including developers, business analysts, and product owners. In this role, you will: * Develop and maintain automated test scripts using Java, Selenium, Gherkin, and Cucumber. * Perform API testing using tools like Postman or Insomnia. * Collaborate with development and QA teams to validate EDI file transactions, specifically 837 and 835 formats. * Execute SQL queries and scripting tasks to support test data setup and validation. * Integrate test automation into CI/CD pipelines using Jenkins and manage version control with Git/GitHub. Work model: We strive to provide flexibility wherever possible. Based on this role's business requirements, this is a remote position open to qualified applicants in North America. Regardless of your working arrangement, we are here to support a healthy work-life balance through our various wellbeing programs. The working arrangements for this role are accurate as of the date of posting. This may change based on the project you're engaged in, as well as business and client requirements. Rest assured; we will always be clear about role expectations. What you need to have to be considered: * Strong experience in Java-based test automation frameworks (Selenium, Cucumber, Gherkin). * Hands-on experience with API testing tools such as Postman or Insomnia. * Familiarity with CI/CD tools like Jenkins and version control systems like Git/GitHub. * Proficiency in SQL and scripting in Linux environments. * Working knowledge of healthcare EDI transactions, especially 837 and 835 formats. These will help you stand out: * Experience in healthcare domain testing and compliance. * Ability to troubleshoot and optimize automation scripts for performance. * Exposure to Agile methodologies and collaborative team environments. * Strong analytical and problem-solving skills. * Excellent communication and documentation abilities. * Cognizant will only consider applicants for this position who are legally authorized to work in the United States without company sponsorship We're excited to meet people who share our mission and can make an impact in a variety of ways. Don't hesitate to apply, even if you only meet the minimum requirements listed. Think about your transferable experiences and unique skills that make you stand out as someone who can bring new and exciting things to this role. Salary and Other Compensation: Applications will be accepted until 11/05/2025. The annual salary for this position is between [$53,477- $92,500] depending on experience and other qualifications of the successful candidate. This position is also eligible for Cognizant's discretionary annual incentive program, based on performance and subject to the terms of Cognizant's applicable plans. Benefits: Cognizant offers the following benefits for this position, subject to applicable eligibility requirements: Medical/Dental/Vision/Life Insurance Paid holidays plus Paid Time Off 401(k) plan and contributions Long-term/Short-term Disability Paid Parental Leave Employee Stock Purchase Plan

The Senior Development Quality Assurance (DQA) Engineer conducts independent assessment of engineering compliance to systems, rules, and processes to ensure fulfillment of internal and external requirements. They will ensure that projects and products are capable and will meet applicable standards and requirements. The Senior DQA Engineer has a comprehensive in-depth understanding of industry and regulatory requirements, standards, and practices in aerospace systems, software, and hardware. Through prior or gained experience in role, the DQA Engineer may also be a candidate for development as a Specialist Regulatory Compliance Engineer (RCE). **Job Description** **Essential Functions and Responsibilities** + Assure that products developed by GE Aerospace are the result of suitable, rigorous, and structured processes + Conduct assessments/audits of engineering development activities to gauge compliance with applicable regulatory, industrial, and company standards including, but not limited to: + RTCA / DO-178B/C + RTCA / DO-254 + MIL-HDBK-516 + SAE ARP4754A + Serve as a domain expert for applicable regulatory, industrial and company standards + Review technical documentation with a view to Quality and Compliance requirements + Generate Quality Assurance plans and work instructions for execution of Quality Assurance functions + Lead and facilitate root cause/corrective action investigations using appropriate procedures + Provide regular and thorough status reports and data to leadership + Ensure Quality records are maintained, metrics collected, and reports given back to the business + Generate and maintain objective evidence of assessment activities for customer and regulatory review + Interface with customers, suppliers and regulatory authorities + Provide technical guidance, mentoring and training to quality processes and requirements + Plan, manage, monitor, and execute complex, high risk, and/or multiple projects/program(s)/customers + Build and maintain relationships throughout customer hierarchy + Influence DQA vision, milestones, and execution strategy + Develop DQA expertise and pipeline + Recognize opportunities, research and implement new tools/processes/etc. **Qualifications and Requirements** + Bachelor of Science in Engineering or Computer Science from an accredited university or college + Minimum of 7 years' experience in applications and embedded software process development in a regulated industry (Aerospace, Medical, etc.) + At least 5 additional years of experience in engineering, quality, process assurance or compliance + Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. **Desired Characteristics** + Strong technical aptitude, including applicable engineering tools and systems + Experience with DO-178 + Ability to coordinate several projects simultaneously + Embedded Controls Experience + Solid oral and written communication skills + Strong interpersonal and leadership skills + Ability to gain US Government Clearance _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

The Senior Development Quality Assurance (DQA) Engineer conducts independent assessment of engineering compliance to systems, rules, and processes to ensure fulfillment of internal and external requirements. They will ensure that projects and products are capable and will meet applicable standards and requirements. The Senior DQA Engineer has a comprehensive in-depth understanding of industry and regulatory requirements, standards, and practices in aerospace systems, software, and hardware. Through prior or gained experience in role, the DQA Engineer may also be a candidate for development as a Specialist Regulatory Compliance Engineer (RCE). Job Description Essential Functions and Responsibilities * Assure that products developed by GE Aerospace are the result of suitable, rigorous, and structured processes * Conduct assessments/audits of engineering development activities to gauge compliance with applicable regulatory, industrial, and company standards including, but not limited to: * RTCA / DO-178B/C * RTCA / DO-254 * MIL-HDBK-516 * SAE ARP4754A * Serve as a domain expert for applicable regulatory, industrial and company standards * Review technical documentation with a view to Quality and Compliance requirements * Generate Quality Assurance plans and work instructions for execution of Quality Assurance functions * Lead and facilitate root cause/corrective action investigations using appropriate procedures * Provide regular and thorough status reports and data to leadership * Ensure Quality records are maintained, metrics collected, and reports given back to the business * Generate and maintain objective evidence of assessment activities for customer and regulatory review * Interface with customers, suppliers and regulatory authorities * Provide technical guidance, mentoring and training to quality processes and requirements * Plan, manage, monitor, and execute complex, high risk, and/or multiple projects/program(s)/customers * Build and maintain relationships throughout customer hierarchy * Influence DQA vision, milestones, and execution strategy * Develop DQA expertise and pipeline * Recognize opportunities, research and implement new tools/processes/etc. Qualifications and Requirements * Bachelor of Science in Engineering or Computer Science from an accredited university or college * Minimum of 7 years' experience in applications and embedded software process development in a regulated industry (Aerospace, Medical, etc.) * At least 5 additional years of experience in engineering, quality, process assurance or compliance * Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Desired Characteristics * Strong technical aptitude, including applicable engineering tools and systems * Experience with DO-178 * Ability to coordinate several projects simultaneously * Embedded Controls Experience * Solid oral and written communication skills * Strong interpersonal and leadership skills * Ability to gain US Government Clearance This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

SAIC is seeking a forward-thinking Instruction Systems Analyst to join an integrated team conducting a Training System Requirements Analysis (TSRA) at Wright Patterson AFB in Dayton, OH. (Please note all qualified candidates MUST HAVE TSRA EXPERIENCE and a Top Secret Clearance.) The analysis and recommendations will directly shape the future training systems for specialized Air Force Aircraft Maintainers and Controllers, ensuring alignment with competency-based training models, learning engineering principles and evolving training methodologies. **The Instructional Systems Analyst will:** + Develop & Assess Training Programs: Evaluate Air Force Aircraft Operations & Maintenance training programs to align with mission needs, competency frameworks, and evolving learning methodologies. + Integrate and analyze task analysis inputs from multiple vendors, perform DIF analysis, and translate results into training requirements, learning objectives, and curriculum structure. + Refine and expand Training System Requirements Analysis (TSRA) documents: Conduct detailed training needs assessments, define training system requirements, and support the development of competency-driven training solutions. + Simulation & Emerging Training Technologies: Research and integrate future simulation-based training technologies into course design, aligning with adaptive learning methodologies and media selection criteria. + Guide vendors in developing curriculum and media, ensuring products align with instructional standards, TSRA outputs, and government program requirements. + Course Content Validation: Work alongside SMEs and government stakeholders to review, validate, and refine course materials ensuring compliance with training standards and Air Force operational needs. + Collaboration & Strategy Development: Engage with instructional system developers, training engineers, and Air Force functional organizations to enhance learning strategies and course effectiveness. + Support LMS and training solution evaluation efforts by gathering requirements, comparing platform capabilities, and preparing findings for government review. **Qualifications** **Required Education, Experience, Skills, & Attributes:** + A bachelor's degree and 10 years or relevant years of experience in lieu of a degree. + Experience in Instructional Systems Design (ISD), Learning Engineering, or Training Systems Engineering. + Experience developing Unmanned Aerial Vehicle (UAV) training programs, including simulator-based training, mission scenarios, or operator proficiency. + Collaboration skills for working with a multidisciplinary team, including system administrators, engineers, and SMEs. + Prior experience as an instructor, or training developer, gap and task analysis. + Must be a U.S. citizen and actively possess Top-Secret Clearance. **Desired Experience, Skills, & Attributes:** + A master's degree and 10 years or more of related experience. + Strong background in competency-based training development and validation. + Familiarity with corporate and Air Force training methodologies, competency frameworks, and assessment models. + Knowledge of government training environments, policies, and network security considerations. Target salary range: $80,001 - $120,000. The estimate displayed represents the typical salary range for this position based on experience and other factors. REQNUMBER: 2600039 SAIC is a premier technology integrator, solving our nation's most complex modernization and systems engineering challenges across the defense, space, federal civilian, and intelligence markets. Our robust portfolio of offerings includes high-end solutions in systems engineering and integration; enterprise IT, including cloud services; cyber; software; advanced analytics and simulation; and training. We are a team of 23,000 strong driven by mission, united purpose, and inspired by opportunity. Headquartered in Reston, Virginia, SAIC has annual revenues of approximately $6.5 billion. For more information, visit saic.com. For information on the benefits SAIC offers, see Working at SAIC. EOE AA M/F/Vet/Disability

SAIC is seeking a forward-thinking Instruction Systems Analyst to join an integrated team conducting a Training System Requirements Analysis (TSRA) at Wright Patterson AFB in Dayton, OH. (Please note all qualified candidates MUST HAVE TSRA EXPERIENCE and a Top Secret Clearance.) The analysis and recommendations will directly shape the future training systems for specialized Air Force Aircraft Maintainers and Controllers, ensuring alignment with competency-based training models, learning engineering principles and evolving training methodologies. The Instructional Systems Analyst will: * Develop & Assess Training Programs: Evaluate Air Force Aircraft Operations & Maintenance training programs to align with mission needs, competency frameworks, and evolving learning methodologies. * Integrate and analyze task analysis inputs from multiple vendors, perform DIF analysis, and translate results into training requirements, learning objectives, and curriculum structure. * Refine and expand Training System Requirements Analysis (TSRA) documents: Conduct detailed training needs assessments, define training system requirements, and support the development of competency-driven training solutions. * Simulation & Emerging Training Technologies: Research and integrate future simulation-based training technologies into course design, aligning with adaptive learning methodologies and media selection criteria. * Guide vendors in developing curriculum and media, ensuring products align with instructional standards, TSRA outputs, and government program requirements. * Course Content Validation: Work alongside SMEs and government stakeholders to review, validate, and refine course materials ensuring compliance with training standards and Air Force operational needs. * Collaboration & Strategy Development: Engage with instructional system developers, training engineers, and Air Force functional organizations to enhance learning strategies and course effectiveness. * Support LMS and training solution evaluation efforts by gathering requirements, comparing platform capabilities, and preparing findings for government review. Qualifications Required Education, Experience, Skills, & Attributes: * A bachelor's degree and 10 years or relevant years of experience in lieu of a degree. * Experience in Instructional Systems Design (ISD), Learning Engineering, or Training Systems Engineering. * Experience developing Unmanned Aerial Vehicle (UAV) training programs, including simulator-based training, mission scenarios, or operator proficiency. * Collaboration skills for working with a multidisciplinary team, including system administrators, engineers, and SMEs. * Prior experience as an instructor, or training developer, gap and task analysis. * Must be a U.S. citizen and actively possess Top-Secret Clearance. Desired Experience, Skills, & Attributes: * A master's degree and 10 years or more of related experience. * Strong background in competency-based training development and validation. * Familiarity with corporate and Air Force training methodologies, competency frameworks, and assessment models. * Knowledge of government training environments, policies, and network security considerations. Target salary range: $80,001 - $120,000. The estimate displayed represents the typical salary range for this position based on experience and other factors. Overview SAIC accepts applications on an ongoing basis and there is no deadline. SAIC is a premier Fortune 500 mission integrator focused on advancing the power of technology and innovation to serve and protect our world. Our robust portfolio of offerings across the defense, space, civilian and intelligence markets includes secure high-end solutions in mission IT, enterprise IT, engineering services and professional services. We integrate emerging technology, rapidly and securely, into mission critical operations that modernize and enable critical national imperatives. We are approximately 24,000 strong; driven by mission, united by purpose, and inspired by opportunities. SAIC is an Equal Opportunity Employer. Headquartered in Reston, Virginia, SAIC has annual revenues of approximately $7.5 billion. For more information, visit saic.com. For ongoing news, please visit our newsroom.

**Roles and Responsibilities:** + Perform normal test set-up for production engines and complex test set-up for product improvement and engineering investigation. + Perform complete mechanical, electrical, and operational acceptance tests of a complicated nature on all engine models, including all standard and non-standard tests for engineering investigations, acceptance testing, and trouble-shooting and component endurance tests. + Install engine into test cell, all required instrumentation in or out of cell, and replacement parts as necessary. + Adjust engine controls and equipment; make all calculations necessary to comply with test requirements and adjustments to engine controls. + Use diagnostic equipment in trouble-shooting engine malfunctions, correct engine malfunctions, and provide sufficient technical information to other personnel if required, to assure a timely and effective solution to test related problems. + Inspect replacement of parts, accept, or reject engine in accordance with test results. + Diagnose and suggest corrective action on engine or components failing test. + May instruct student engineers on details of general test procedures; instruct lower rated personnel and maintain test records as required. + Maintain records and perform related duties. 2/1/88 Definition for this occupation is for identity only; it does not detail all operations performed or required. **MINIMUM EXPERIENCE: 2 years** + Has jet engine testing or varied jet engine assembly experience. + Must have a High School education or equivalent. DISPLACEMENT: Incumbents of this job have displacement rights to following jobs: + Development Mechanic, E4004, R21 + Production Assembly Mechanic, E4004, R19 + Heat Treat Services, E6603, R17 + Multi Services. E0601, R16 + Facilities Services, E0500, R13 _This role requires access to U.S. export-controlled information. Therefore, for applicants who are not U.S. lawful permanent residents, U.S. Citizens, or have been granted asylee or refugee status (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), employment will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

SummaryJob Description Roles and Responsibilities: Perform normal test set-up for production engines and complex test set-up for product improvement and engineering investigation. Perform complete mechanical, electrical, and operational acceptance tests of a complicated nature on all engine models, including all standard and non-standard tests for engineering investigations, acceptance testing, and trouble-shooting and component endurance tests. Install engine into test cell, all required instrumentation in or out of cell, and replacement parts as necessary. Adjust engine controls and equipment; make all calculations necessary to comply with test requirements and adjustments to engine controls. Use diagnostic equipment in trouble-shooting engine malfunctions, correct engine malfunctions, and provide sufficient technical information to other personnel if required, to assure a timely and effective solution to test related problems. Inspect replacement of parts, accept, or reject engine in accordance with test results. Diagnose and suggest corrective action on engine or components failing test. May instruct student engineers on details of general test procedures; instruct lower rated personnel and maintain test records as required. Maintain records and perform related duties. 2/1/88 Definition for this occupation is for identity only; it does not detail all operations performed or required. MINIMUM EXPERIENCE: 2 years Has jet engine testing or varied jet engine assembly experience. Must have a High School education or equivalent. DISPLACEMENT: Incumbents of this job have displacement rights to following jobs: Development Mechanic, E4004, R21 Production Assembly Mechanic, E4004, R19 Heat Treat Services, E6603, R17 Multi Services. E0601, R16 Facilities Services, E0500, R13 This role requires access to U.S. export-controlled information. Therefore, for applicants who are not U.S. lawful permanent residents, U.S. Citizens, or have been granted asylee or refugee status (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), employment will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

The successful candidate will work cross functionally supporting controllership, FP&A and project teams. The successful candidate will be responsible for a variety of general accounting tasks for Colibrium Additive's business operations based in USA and Germany. These include operational accounting, general ledger management, Balance sheet reviews, among others. The successful candidate will also be responsible leading an effective and efficient revenue recognition process on machine and services sales and will play a significant role in the effectiveness of the Colibrium Additive's monthly and quarterly close process. They will be responsible for driving technical accounting compliance, financial and operational internal controls, process simplification, and operational excellence to deliver accurate financial reporting and analysis for assigned areas of responsibility. This role can be based in USA, Germany or Sweden and so the successful candidate will need to work within teams and cross functionally across different time zones. About Us ✈️ Colibrium Additive - part of GE Aerospace (NYSE: GE) - is a world leader in metal additive design and manufacturing, a pioneering process that has the power and potential to transform businesses. Through our integrated offering of additive experts, advanced machines, services, and quality powders, we empower our customers to build innovative new products. GE Aerospace is an Equal Opportunity Employer where inclusion matters. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. **Job Description** **Essential Responsibilities** + Responsible for Colibrium Additive's general accounting processes and close including: + Own the monthly financial close process (post Journals, review TBs, prepare/review reconciliations) and leadership reporting + Inventory, including participation in resolution of CAS Schedule II finding + Revenue recognition application for machine sales, services, powder and Addworks + Reserves related to inventory and purchase price accounting + Other general accounting processes as deemed necessary + Balance sheet analytical reviews for areas of assigned responsibility + Preparation of account reconciliations for assigned responsibility + Ensure proper accounting for sales within GE through coordination with contacts within Colibrium Additive, GE Aerospace, and other GE businesses + Responsible for preparation of key disclosure to GE Corporate regarding Colibrium Additive internal sales + Own and maintain relationships with key contacts in business operations including Supply Chain, Engineering and Product Management + Identify and facilitate simplification opportunities to improve the efficiency of closing processes, eliminate manual effort and maximize automation of accounting processes + Understand, interpret, and develop (as needed) applicable Enterprise Standards, Standard Operating Procedures and Process Maps for assigned areas of accounting + Partner with Colibrium Additive / Aerospace technical controllership, business finance, and global operations contacts to deliver timely, high quality financial reporting information + Support internal and external corporate accounting and auditing processes **Qualifications/Requirements** + Bachelor's degree from an accredited university or college + 5 or more years of experience in accounting + Ability to coordinate several projects simultaneously. + Ability to anticipate, communicate, report and resolve challenges + Proven analytical and organizational ability. + Effective problem identification and solution skills. + Understanding of how operational processes link to the financial statement **Desired Characteristics** + CPA, CA and/or public accounting experience preferred + Operational controllership experience preferred but not required + Experience working with business operational partners preferred but not required + Strong interpersonal skills and professional style when dealing with business contacts, including both oral and written communication + Detail-oriented and strong time management skills + Demonstrated ability to analyze and resolve problems + Flexible approach with a strong team spirit + Compliance & controllership mindset + Comfortable to execute through uncertainty + Experience with Microsoft Office products, Oracle accounting/ERP systems GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

The successful candidate will work cross functionally supporting controllership, FP&A and project teams. The successful candidate will be responsible for a variety of general accounting tasks for Colibrium Additive's business operations based in USA and Germany. These include operational accounting, general ledger management, Balance sheet reviews, among others. The successful candidate will also be responsible leading an effective and efficient revenue recognition process on machine and services sales and will play a significant role in the effectiveness of the Colibrium Additive's monthly and quarterly close process. They will be responsible for driving technical accounting compliance, financial and operational internal controls, process simplification, and operational excellence to deliver accurate financial reporting and analysis for assigned areas of responsibility. This role can be based in USA, Germany or Sweden and so the successful candidate will need to work within teams and cross functionally across different time zones. About Us ️ Colibrium Additive - part of GE Aerospace (NYSE: GE) - is a world leader in metal additive design and manufacturing, a pioneering process that has the power and potential to transform businesses. Through our integrated offering of additive experts, advanced machines, services, and quality powders, we empower our customers to build innovative new products. GE Aerospace is an Equal Opportunity Employer where inclusion matters. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Job Description Essential Responsibilities * Responsible for Colibrium Additive's general accounting processes and close including: * Own the monthly financial close process (post Journals, review TBs, prepare/review reconciliations) and leadership reporting * Inventory, including participation in resolution of CAS Schedule II finding * Revenue recognition application for machine sales, services, powder and Addworks * Reserves related to inventory and purchase price accounting * Other general accounting processes as deemed necessary * Balance sheet analytical reviews for areas of assigned responsibility * Preparation of account reconciliations for assigned responsibility * Ensure proper accounting for sales within GE through coordination with contacts within Colibrium Additive, GE Aerospace, and other GE businesses * Responsible for preparation of key disclosure to GE Corporate regarding Colibrium Additive internal sales * Own and maintain relationships with key contacts in business operations including Supply Chain, Engineering and Product Management * Identify and facilitate simplification opportunities to improve the efficiency of closing processes, eliminate manual effort and maximize automation of accounting processes * Understand, interpret, and develop (as needed) applicable Enterprise Standards, Standard Operating Procedures and Process Maps for assigned areas of accounting * Partner with Colibrium Additive / Aerospace technical controllership, business finance, and global operations contacts to deliver timely, high quality financial reporting information * Support internal and external corporate accounting and auditing processes Qualifications/Requirements * Bachelor's degree from an accredited university or college * 5 or more years of experience in accounting * Ability to coordinate several projects simultaneously. * Ability to anticipate, communicate, report and resolve challenges * Proven analytical and organizational ability. * Effective problem identification and solution skills. * Understanding of how operational processes link to the financial statement Desired Characteristics * CPA, CA and/or public accounting experience preferred * Operational controllership experience preferred but not required * Experience working with business operational partners preferred but not required * Strong interpersonal skills and professional style when dealing with business contacts, including both oral and written communication * Detail-oriented and strong time management skills * Demonstrated ability to analyze and resolve problems * Flexible approach with a strong team spirit * Compliance & controllership mindset * Comfortable to execute through uncertainty * Experience with Microsoft Office products, Oracle accounting/ERP systems GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Required Education, Experience, Skills, & Attributes: A bachelor's degree and 10 years or relevant years of experience in lieu of a degree. Experience in Instructional Systems Design (ISD), Learning Engineering, or Training Systems Engineering. Experience developing Unmanned Aerial Vehicle (UAV) training programs, including simulator-based training, mission scenarios, or operator proficiency. Collaboration skills for working with a multidisciplinary team, including system administrators, engineers, and SMEs. Prior experience as an instructor, or training developer, gap and task analysis. Must be a U.S. citizen and actively possess Top-Secret Clearance. Desired Experience, Skills, & Attributes: A master's degree and 10 years or more of related experience. Strong background in competency-based training development and validation. Familiarity with corporate and Air Force training methodologies, competency frameworks, and assessment models. Knowledge of government training environments, policies, and network security considerations. SAIC is seeking a forward-thinking Instruction Systems Analyst to join an integrated team conducting a Training System Requirements Analysis (TSRA) at Wright Patterson AFB in Dayton, OH. (Please note all qualified candidates MUST HAVE TSRA EXPERIENCE and a Top Secret Clearance.) The analysis and recommendations will directly shape the future training systems for specialized Air Force Aircraft Maintainers and Controllers, ensuring alignment with competency-based training models, learning engineering principles and evolving training methodologies. The Instructional Systems Analyst will: Develop & Assess Training Programs\: Evaluate Air Force Aircraft Operations & Maintenance training programs to align with mission needs, competency frameworks, and evolving learning methodologies. Integrate and analyze task analysis inputs from multiple vendors, perform DIF analysis, and translate results into training requirements, learning objectives, and curriculum structure. Refine and expand Training System Requirements Analysis (TSRA) documents\: Conduct detailed training needs assessments, define training system requirements, and support the development of competency-driven training solutions. Simulation & Emerging Training Technologies\: Research and integrate future simulation-based training technologies into course design, aligning with adaptive learning methodologies and media selection criteria. Guide vendors in developing curriculum and media, ensuring products align with instructional standards, TSRA outputs, and government program requirements. Course Content Validation\: Work alongside SMEs and government stakeholders to review, validate, and refine course materials ensuring compliance with training standards and Air Force operational needs. Collaboration & Strategy Development\: Engage with instructional system developers, training engineers, and Air Force functional organizations to enhance learning strategies and course effectiveness. Support LMS and training solution evaluation efforts by gathering requirements, comparing platform capabilities, and preparing findings for government review. SAIC accepts applications on an ongoing basis and there is no deadline. SAIC is a premier Fortune 500 mission integrator focused on advancing the power of technology and innovation to serve and protect our world. Our robust portfolio of offerings across the defense, space, civilian and intelligence markets includes secure high-end solutions in mission IT, enterprise IT, engineering services and professional services. We integrate emerging technology, rapidly and securely, into mission critical operations that modernize and enable critical national imperatives. We are approximately 24,000 strong; driven by mission, united by purpose, and inspired by opportunities. SAIC is an Equal Opportunity Employer. Headquartered in Reston, Virginia, SAIC has annual revenues of approximately $7.5 billion. For more information, visit saic.com. For ongoing news, please visit our newsroom.