Staff Electrical Engineer jobs at Lockheed Martin

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. An organization within Northrop Grumman's Mission Systems Sector, Microelectronics Design and Applications (MDA) is a leading innovator in advanced microelectronics design and fabrication. MDA is seeking an Associate Electronics Hardware Design Engineer / Electronic Hardware Design Engineer. This position is located at Beavercreek, OH. (Dayton, OH) Roles and Responsibilities: * Perform design and development of complex high speed digital circuit card assemblies integrating FPGAs and microprocessors through high-speed serial networks * Take designs from concept through schematic capture, layout, assembly, debug, and production test * Collaborate with peers and other engineering disciplines in the planning, design, and prototyping of complex digital systems * Identify and implement risk reduction activities for your projects * Interface with vendors and contractors * Advise others through design reviews and implementation of industry best practices * Work under general direction to independently determine and develop viable solutions * Define system and CCA level specifications from dynamic, loose requirements This position will serve 100% on-site in Beavercreek, OH. There is no remote work. This position can be filled as an Associate Advanced Electronic Hardware Design Engineer or an Electronic Hardware Design Engineer Basic Qualifications for Associate Electronic Hardware Design Engineer: * Completed Bachelor's degree in Science, Technology, Engineering, or Mathematics (STEM) * Full custom circuit card design cycle (concept through production) experience involving FPGAs, DDR memory, high speed serdes, and microprocessors * Experience defining interfaces with software teams for microprocessors/microcontrollers * Hands on use of laboratory test equipment such as: oscilloscopes, function generators, DMM, BERT scopes, network analyzers and signal analyzers * Ability to solder and modify prototypes to prove a working design * Ability to create test plans and assembly instructions * Strong verbal/written communication and presentation skills * Candidate must be a US Citizen * Clearance: Ability to obtain and maintain the necessary level of US Government security clearance per customer requirements Basic Qualifications for Electronic Hardware Design Engineer: * Bachelor's degree in a STEM discipline with 2 years of experience or a Master's degree in a STEM discipline with 0 years of experience or a PhD in a STEM discipline with 0 years of experience. * Full custom circuit card design cycle (concept through production) experience involving FPGAs, DDR memory, high speed serdes, and microprocessors * Experience defining interfaces with software teams for microprocessors/microcontrollers * Hands on use of laboratory test equipment such as: oscilloscopes, function generators, DMM, BERT scopes, network analyzers and signal analyzers * Ability to solder and modify prototypes to prove a working design * Ability to create test plans and assembly instructions * Strong verbal/written communication and presentation skills * Candidate must be a US Citizen * Clearance: Ability to obtain and maintain the necessary level of US Government security clearance per customer requirements Preferred Qualifications: * Active TS/SCI with Polygraph * Schematic capture and layout using Mentor Graphics Xpedition tools * High speed digital signal integrity simulation using Hyperlynx, HFSS, or ADS * Experience developing embedded software and software using C, C++ * Experience RTL development using SystemVerilog * Familiarity with AMD FPGAs and design tools * Project leadership Primary Level Salary Range: $69,300.00 - $103,900.00 Secondary Level Salary Range: $83,400.00 - $125,200.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. An organization within Northrop Grumman's Mission Systems Sector, Microelectronics Design and Applications (MDA) is a leading innovator in advanced microelectronics design and fabrication. MDA is seeking an **Associate Electronics Hardware Design Engineer / Electronic Hardware Design Engineer.** This position is located at **Beavercreek, OH. (Dayton, OH)** **Roles and Responsibilities:** + Perform design and development of complex high speed digital circuit card assemblies integrating FPGAs and microprocessors through high-speed serial networks + Take designs from concept through schematic capture, layout, assembly, debug, and production test + Collaborate with peers and other engineering disciplines in the planning, design, and prototyping of complex digital systems + Identify and implement risk reduction activities for your projects + Interface with vendors and contractors + Advise others through design reviews and implementation of industry best practices + Work under general direction to independently determine and develop viable solutions + Define system and CCA level specifications from dynamic, loose requirements This position will serve 100% on-site in Beavercreek, OH. There is no remote work. _This position can be filled as an Associate Advanced Electronic Hardware Design Engineer or an Electronic Hardware Design Engineer_ **Basic Qualifications for Associate Electronic Hardware Design Engineer:** + Completed Bachelor's degree in Science, Technology, Engineering, or Mathematics (STEM) + Full custom circuit card design cycle (concept through production) experience involving FPGAs, DDR memory, high speed serdes, and microprocessors + Experience defining interfaces with software teams for microprocessors/microcontrollers + Hands on use of laboratory test equipment such as: oscilloscopes, function generators, DMM, BERT scopes, network analyzers and signal analyzers + Ability to solder and modify prototypes to prove a working design + Ability to create test plans and assembly instructions + Strong verbal/written communication and presentation skills + Candidate must be a US Citizen + Clearance: Ability to obtain and maintain the necessary level of US Government security clearance per customer requirements **Basic Qualifications for Electronic Hardware Design Engineer:** + Bachelor's degree in a STEM discipline with 2 years of experience or a Master's degree in a STEM discipline with 0 years of experience or a PhD in a STEM discipline with 0 years of experience. + Full custom circuit card design cycle (concept through production) experience involving FPGAs, DDR memory, high speed serdes, and microprocessors + Experience defining interfaces with software teams for microprocessors/microcontrollers + Hands on use of laboratory test equipment such as: oscilloscopes, function generators, DMM, BERT scopes, network analyzers and signal analyzers + Ability to solder and modify prototypes to prove a working design + Ability to create test plans and assembly instructions + Strong verbal/written communication and presentation skills + Candidate must be a US Citizen + Clearance: Ability to obtain and maintain the necessary level of US Government security clearance per customer requirements **Preferred Qualifications:** + Active TS/SCI with Polygraph + Schematic capture and layout using Mentor Graphics Xpedition tools + High speed digital signal integrity simulation using Hyperlynx, HFSS, or ADS + Experience developing embedded software and software using C, C++ Experience RTL development using SystemVerilog + Familiarity with AMD FPGAs and design tools + Project leadership Primary Level Salary Range: $69,300.00 - $103,900.00 Secondary Level Salary Range: $83,400.00 - $125,200.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. NG Microelectronics Center is seeking a Principal/Sr Principal Printed Circuit Board (PCB) Layout Designer Engineer in Beavercreek, OH (Dayton, OH) to support architecture definition and product design. We are seeking engineers with the desire to learn new technologies to join our innovative organization to help develop, enhance and maintain Digital and RF designs on cutting edge products and systems. Our wide breadth of technologies and capabilities allows us to provide our customers with unique "More than Moore" solutions. The selected individual will work on board designs across the full product life cycle process. In this capacity, you will utilize your working knowledge of Layout and Library tools. In this role you will: * Work with all engineering disciplines to incorporate their constraints into the Mentor Xpedition PCB CAD database * Understand and adhere to the core Product Engineering PCB design processes, ensuring that the team understands and remain compliant * Develop an expert understanding of our high reliability design standards * Lead PCB design reviews, and help to create PCB design schedules * Become knowledgeable with our internal build specs, industry standards, and understand PCB manufacturability. * Perform PCB Librarian duties such as symbol and cell creation and verification * Define PCB stackups and mechanical structures * Perform complex circuit card layout tasks including DDR memory interfaces, high speed SERDES links, high density interconnects, RF transmission lines, and RF shapes * Simulate completed PCB designs for crosstalk, loss, and signal integrity issues Are you seeking a challenging role with a strong team? Come define possible with us in Beavercreek, OH! This position can be filled as a Principal PCB Layout Engineer or Senior Principal PCB Layout Engineer. Basic Qualifications for Principal PCB Layout Engineer: * Bachelor of Science (BS) degree in science, technology, engineering, or related discipline with at least 5 years of experience; 3 years with Masters Degree; OR 1 years with a PhD * Experience with layout of complex printed circuit boards using industry standard design tools * Current understanding of IPC industry standards * Knowledge of how PCBs are produced and current understanding of design and manufacturability challenges * Full design cycle participation of a complex circuit card * Must be a US Citizen * Clearance: Ability to obtain and maintain the necessary US Government security clearance per customers' requirements. Basic Qualifications for Senior Principal PCB Layout Engineer: * Bachelor of Science (BS) degree in science, technology, engineering, or related discipline with at least 8 years of experience; 6 years with Masters Degree; OR 4 years with a PhD * Experience with layout of complex printed circuit boards using industry standard design tools * Current understanding of IPC industry standards * Knowledge of how PCBs are produced and current understanding of design and manufacturability challenges * Full design cycle participation of a complex circuit card * Must be a US Citizen * Clearance: Ability to obtain and maintain the necessary US Government security clearance per customers' requirements. Preferred Qualifications: * Master's Degree in Mechanical or Electrical Engineering * Experience with Siemens Xpedition layout and library tools * Experience with electronic packaging / mechanical design * Experience with electronics design development * Mixed signal design experience * An active Top Secret w/ SCI clearance Primary Level Salary Range: $100,300.00 - $150,500.00 Secondary Level Salary Range: $124,900.00 - $187,300.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. NG Microelectronics Center is seeking a **Principal/Sr Principal Printed Circuit Board (PCB) Layout Designer Engineer** in Beavercreek, OH (Dayton, OH) to support architecture definition and product design. We are seeking engineers with the desire to learn new technologies to join our innovative organization to help develop, enhance and maintain Digital and RF designs on cutting edge products and systems. Our wide breadth of technologies and capabilities allows us to provide our customers with unique "More than Moore" solutions. The selected individual will work on board designs across the full product life cycle process. In this capacity, you will utilize your working knowledge of Layout and Library tools. **In this role you will:** + Work with all engineering disciplines to incorporate their constraints into the Mentor Xpedition PCB CAD database + Understand and adhere to the core Product Engineering PCB design processes, ensuring that the team understands and remain compliant + Develop an expert understanding of our high reliability design standards + Lead PCB design reviews, and help to create PCB design schedules + Become knowledgeable with our internal build specs, industry standards, and understand PCB manufacturability. + Perform PCB Librarian duties such as symbol and cell creation and verification + Define PCB stackups and mechanical structures + Perform complex circuit card layout tasks including DDR memory interfaces, high speed SERDES links, high density interconnects, RF transmission lines, and RF shapes + Simulate completed PCB designs for crosstalk, loss, and signal integrity issues **Are you seeking a challenging role with a strong team? Come define possible with us in Beavercreek, OH!** _This position can be filled as a Principal PCB Layout Engineer or Senior Principal PCB Layout Engineer._ **Basic Qualifications for Principal PCB Layout Engineer:** + Bachelor of Science (BS) degree in science, technology, engineering, or related discipline with at least 5 years of experience; 3 years with Masters Degree; OR 1 years with a PhD + Experience with layout of complex printed circuit boards using industry standard design tools + Current understanding of IPC industry standards + Knowledge of how PCBs are produced and current understanding of design and manufacturability challenges + Full design cycle participation of a complex circuit card + Must be a US Citizen + **Clearance** : Ability to obtain and maintain the necessary US Government security clearance per customers' requirements. **Basic Qualifications for Senior Principal PCB Layout Engineer:** + Bachelor of Science (BS) degree in science, technology, engineering, or related discipline with at least 8 years of experience; 6 years with Masters Degree; OR 4 years with a PhD + Experience with layout of complex printed circuit boards using industry standard design tools + Current understanding of IPC industry standards + Knowledge of how PCBs are produced and current understanding of design and manufacturability challenges + Full design cycle participation of a complex circuit card + Must be a US Citizen + **Clearance** : Ability to obtain and maintain the necessary US Government security clearance per customers' requirements. **Preferred Qualifications:** + Master's Degree in Mechanical or Electrical Engineering + Experience with Siemens Xpedition layout and library tools + Experience with electronic packaging / mechanical design + Experience with electronics design development + Mixed signal design experience + An active Top Secret w/ SCI clearance Primary Level Salary Range: $100,300.00 - $150,500.00 Secondary Level Salary Range: $124,900.00 - $187,300.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: A US Government security clearance per customer's requirements.TRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. An organization within Northrop Grumman's Mission Systems Sector, Microelectronics Design and Applications (MDA) is a leading innovator in advanced microelectronics design and fabrication. MDA is seeking an Associate Electronics Hardware Design Engineer / Electronic Hardware Design Engineer. This position is located at Beavercreek, OH. (Dayton, OH) Roles and Responsibilities: Perform design and development of complex high speed digital circuit card assemblies integrating FPGAs and microprocessors through high-speed serial networks Take designs from concept through schematic capture, layout, assembly, debug, and production test Collaborate with peers and other engineering disciplines in the planning, design, and prototyping of complex digital systems Identify and implement risk reduction activities for your projects Interface with vendors and contractors Advise others through design reviews and implementation of industry best practices Work under general direction to independently determine and develop viable solutions Define system and CCA level specifications from dynamic, loose requirements This position will serve 100% on-site in Beavercreek, OH. There is no remote work. This position can be filled as an Associate Advanced Electronic Hardware Design Engineer or an Electronic Hardware Design Engineer Basic Qualifications for Associate Electronic Hardware Design Engineer: Completed Bachelor's degree in Science, Technology, Engineering, or Mathematics (STEM) Full custom circuit card design cycle (concept through production) experience involving FPGAs, DDR memory, high speed serdes, and microprocessors Experience defining interfaces with software teams for microprocessors/microcontrollers Hands on use of laboratory test equipment such as: oscilloscopes, function generators, DMM, BERT scopes, network analyzers and signal analyzers Ability to solder and modify prototypes to prove a working design Ability to create test plans and assembly instructions Strong verbal/written communication and presentation skills Candidate must be a US Citizen Clearance: Ability to obtain and maintain the necessary level of US Government security clearance per customer requirements Basic Qualifications for Electronic Hardware Design Engineer: Bachelor's degree in a STEM discipline with 2 years of experience or a Master's degree in a STEM discipline with 0 years of experience or a PhD in a STEM discipline with 0 years of experience. Full custom circuit card design cycle (concept through production) experience involving FPGAs, DDR memory, high speed serdes, and microprocessors Experience defining interfaces with software teams for microprocessors/microcontrollers Hands on use of laboratory test equipment such as: oscilloscopes, function generators, DMM, BERT scopes, network analyzers and signal analyzers Ability to solder and modify prototypes to prove a working design Ability to create test plans and assembly instructions Strong verbal/written communication and presentation skills Candidate must be a US Citizen Clearance: Ability to obtain and maintain the necessary level of US Government security clearance per customer requirements Preferred Qualifications: Active TS/SCI with Polygraph Schematic capture and layout using Mentor Graphics Xpedition tools High speed digital signal integrity simulation using Hyperlynx, HFSS, or ADS Experience developing embedded software and software using C, C++ Experience RTL development using SystemVerilog Familiarity with AMD FPGAs and design tools Project leadership Primary Level Salary Range: $69,300.00 - $103,900.00Secondary Level Salary Range: $83,400.00 - $125,200.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. NG Microelectronics Center is seeking a **Principal/Sr Principal Printed Circuit Board (PCB) Layout Designer Engineer** in Beavercreek, OH (Dayton, OH) to support architecture definition and product design. We are seeking engineers with the desire to learn new technologies to join our innovative organization to help develop, enhance and maintain Digital and RF designs on cutting edge products and systems. Our wide breadth of technologies and capabilities allows us to provide our customers with unique "More than Moore" solutions. The selected individual will work on board designs across the full product life cycle process. In this capacity, you will utilize your working knowledge of Layout and Library tools. **In this role you will:** + Work with all engineering disciplines to incorporate their constraints into the Mentor Xpedition PCB CAD database + Understand and adhere to the core Product Engineering PCB design processes, ensuring that the team understands and remain compliant + Develop an expert understanding of our high reliability design standards + Lead PCB design reviews, and help to create PCB design schedules + Become knowledgeable with our internal build specs, industry standards, and understand PCB manufacturability. + Perform PCB Librarian duties such as symbol and cell creation and verification + Define PCB stackups and mechanical structures + Perform complex circuit card layout tasks including DDR memory interfaces, high speed SERDES links, high density interconnects, RF transmission lines, and RF shapes + Simulate completed PCB designs for crosstalk, loss, and signal integrity issues **Are you seeking a challenging role with a strong team? Come define possible with us in Beavercreek, OH!** _This position can be filled as a Principal PCB Layout Engineer or Senior Principal PCB Layout Engineer._ **Basic Qualifications for Principal PCB Layout Engineer:** + Bachelor of Science (BS) degree in science, technology, engineering, or related discipline with at least 5 years of experience; 3 years with Masters Degree; OR 1 years with a PhD + Experience with layout of complex printed circuit boards using industry standard design tools + Current understanding of IPC industry standards + Knowledge of how PCBs are produced and current understanding of design and manufacturability challenges + Full design cycle participation of a complex circuit card + Must be a US Citizen + **Clearance** : Ability to obtain and maintain the necessary US Government security clearance per customers' requirements. **Basic Qualifications for Senior Principal PCB Layout Engineer:** + Bachelor of Science (BS) degree in science, technology, engineering, or related discipline with at least 8 years of experience; 6 years with Masters Degree; OR 4 years with a PhD + Experience with layout of complex printed circuit boards using industry standard design tools + Current understanding of IPC industry standards + Knowledge of how PCBs are produced and current understanding of design and manufacturability challenges + Full design cycle participation of a complex circuit card + Must be a US Citizen + **Clearance** : Ability to obtain and maintain the necessary US Government security clearance per customers' requirements. **Preferred Qualifications:** + Master's Degree in Mechanical or Electrical Engineering + Experience with Siemens Xpedition layout and library tools + Experience with electronic packaging / mechanical design + Experience with electronics design development + Mixed signal design experience + An active Top Secret w/ SCI clearance Primary Level Salary Range: $100,300.00 - $150,500.00 Secondary Level Salary Range: $124,900.00 - $187,300.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Country: United States of America Remote U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What You Will Do: The positions primary focus is the creation and validation of a centrally operational technology, controls hardware specification for all of Pratt and Whitney to utilize. After creation, this role will be to ensure compliance with all Pratt and Whitney sites as well as machine and system suppliers. The position will also create and implement standard deliverables and buy off procedures generated as part of the hardware specification and in alignment with all company and project automation goals. Primary Job Responsibilities: Create and assist in the execution of standard as related to controls hardware. This includes: Component list per application including supplier selection Design and implementation validation Standard control panel designs Standard utility designs Operational Technology network architecture Standard engineering procedures and documentation Standard best practices, integration procedures and documentation Maintenance procedures and Life Cycle Cost calculations Machine tagging standardization Supplier hardware drawing approvals and review processes Standardization of pneumatic safety circuits Continuous improvement of controls hardware standards. Interfacing with suppliers to understand potential supply chain constraints. Support of suppliers with the approval process for hardware design. Applying expertise to technical problem resolution for current and future projects. Works to influence parties within and outside of department at an operational level regarding policies, practices and procedures. Assist as resource in the capital procurement process Provide an expert level of understanding of controls standards and execution to all levels of the organization. Communicate with business partners both local, remote, internally, and externally Communicating at all levels within RTX and Pratt & Whitney, as well as externally, tapping technical resources, forming teams and consulting with programs. Meeting all Environmental Health & Safety and Preventative Maintenance requirements associated with manufacturing development. Qualifications You Must Have: Bachelor's Degree or equivalent demonstrated experience in Industrial electrical engineering, Computer/ Software engineering, Engineering, Manufacturing or related discipline and/or 5+ years of experience in automated systems specifically in manufacturing environments US Citizen due to program requirements The ability to obtain a US Government Secret Clearance Up to 50% travel required. Qualifications We Prefer: Studio 5000 Logix designer, Factory Talk, RS Networks, AutoCAD, Eplan and MS Office Suite Strong communication, collaboration and team building skills; ability to connect with all levels of the organization Extensive experience with controls hardware design utilizing a broad range of components and architectures Extensive experience troubleshooting different component manufactures and applications Extensive experience with application of NFPA and NEC codes Experience with system software / PLC code development, HMI development Learn More & Apply Now: In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 82,000 USD - 164,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

**Key Responsibilities:** + _End-to-End Implementation:_ Take ownership of the entire analytics lifecycle, from requirements gathering and data pipeline development to delivering actionable insights and dashboards. + _Data Pipeline Development:_ Design, develop, and maintain robust ETL/ELT pipelines to process and transform data from various sources into usable formats. + _Data Modeling:_ Create and maintain optimized data models to support analytics and reporting needs, ensuring data integrity and consistency. + _Understanding Business Processes:_ Develop a deep understanding of business processes, particularly within supply chain sites, to identify opportunities for improvement and enable tracking of key performance indicators (KPIs) such as Safety, Quality, Delivery, Inventory, and Productivity (SQDIP). + _Collaboration with Business Users:_ Partner closely with business users to understand their data needs, translate requirements into technical solutions, and ensure analytics solutions align with business goals. + _Data Quality Assurance:_ Implement data validation and monitoring processes to ensure high-quality and reliable data for analytics. + _Performance Optimization:_ Optimize data workflows and queries for efficiency and scalability, ensuring minimal latency and maximum performance. + _Analytics and Visualization:_ Develop and maintain interactive dashboards and visualizations using Spotfire to enable data-driven decision-making across the organization. + _Ownership and Accountability:_ Act as the primary owner of analytics solutions, ensuring timely delivery, ongoing maintenance, and continuous improvement of data products. + _Documentation and Standards:_ Develop and maintain documentation for data pipelines, models, and processes, ensuring adherence to best practices and company standards. + _Continuous Improvement:_ Identify opportunities for process improvement and automation within data workflows and analytics operations. + _Compliance and Security:_ Ensure data solutions comply with organizational policies, data privacy regulations, and security standards. **Minimum Qualifications:** + Bachelor's degree from accredited university or college with minimum of 4 years of professional experience OR Associates degree with minimum of 7 years of professional experience OR High School Diploma with minimum of 9 years of professional experience + Minimum 4 years of professional experience in data and Analytics + Note: Military experience is equivalent to professional experience Eligibility Requirements: + Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. **Preferred Qualifications:** + Proven experience with SQL, Python, and data visualization tools (e.g., Spotfire). + Familiarity with cloud platforms (e.g., AWS, Azure) and data warehousing solutions (e.g., Snowflake, Redshift). + Strong understanding of data modelling, ETL/ELT processes, and database design. + Proficiency in data pipeline tools (e.g., Apache Airflow, dbt, or similar). + Knowledge of data governance, security, and compliance best practices. + Excellent problem-solving and analytical skills. + Effective communication and collaboration skills to work with business users and cross-functional teams. **Desired Qualifications:** + Experience with machine learning workflows and tools. + Familiarity with Agile methodologies and tools like JIRA. + Knowledge of GE Aerospace's FLIGHT DECK operating system and lean principles. + Experience in the aerospace or manufacturing industry _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Key Responsibilities: * End-to-End Implementation: Take ownership of the entire analytics lifecycle, from requirements gathering and data pipeline development to delivering actionable insights and dashboards. * Data Pipeline Development: Design, develop, and maintain robust ETL/ELT pipelines to process and transform data from various sources into usable formats. * Data Modeling: Create and maintain optimized data models to support analytics and reporting needs, ensuring data integrity and consistency. * Understanding Business Processes: Develop a deep understanding of business processes, particularly within supply chain sites, to identify opportunities for improvement and enable tracking of key performance indicators (KPIs) such as Safety, Quality, Delivery, Inventory, and Productivity (SQDIP). * Collaboration with Business Users: Partner closely with business users to understand their data needs, translate requirements into technical solutions, and ensure analytics solutions align with business goals. * Data Quality Assurance: Implement data validation and monitoring processes to ensure high-quality and reliable data for analytics. * Performance Optimization: Optimize data workflows and queries for efficiency and scalability, ensuring minimal latency and maximum performance. * Analytics and Visualization: Develop and maintain interactive dashboards and visualizations using Spotfire to enable data-driven decision-making across the organization. * Ownership and Accountability: Act as the primary owner of analytics solutions, ensuring timely delivery, ongoing maintenance, and continuous improvement of data products. * Documentation and Standards: Develop and maintain documentation for data pipelines, models, and processes, ensuring adherence to best practices and company standards. * Continuous Improvement: Identify opportunities for process improvement and automation within data workflows and analytics operations. * Compliance and Security: Ensure data solutions comply with organizational policies, data privacy regulations, and security standards. Minimum Qualifications: * Bachelor's degree from accredited university or college with minimum of 4 years of professional experience OR Associates degree with minimum of 7 years of professional experience OR High School Diploma with minimum of 9 years of professional experience * Minimum 4 years of professional experience in data and Analytics * Note: Military experience is equivalent to professional experience Eligibility Requirements: * Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Preferred Qualifications: * Proven experience with SQL, Python, and data visualization tools (e.g., Spotfire). * Familiarity with cloud platforms (e.g., AWS, Azure) and data warehousing solutions (e.g., Snowflake, Redshift). * Strong understanding of data modelling, ETL/ELT processes, and database design. * Proficiency in data pipeline tools (e.g., Apache Airflow, dbt, or similar). * Knowledge of data governance, security, and compliance best practices. * Excellent problem-solving and analytical skills. * Effective communication and collaboration skills to work with business users and cross-functional teams. Desired Qualifications: * Experience with machine learning workflows and tools. * Familiarity with Agile methodologies and tools like JIRA. * Knowledge of GE Aerospace's FLIGHT DECK operating system and lean principles. * Experience in the aerospace or manufacturing industry This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

Can you help us develop the future of flight? We're advancing flight for our customers, and we need engineers who can help us innovate. The GE Aerospace Engineering Team is looking for experienced mechanical design engineers who are ready to work on the fastest growing engine in Aviation history, GE9X. The GE9X engine is forecasted to enter service in 2027, creating a generational opportunity to be part of a team introducing a widebody aircraft and engine system to the field. Within the Lifecycle Engineering team, as the GE9X Combustor Module Cost & Producibility Staff Engineer you will collaborate within the combustor module to implement design changes that reduce costs and enhance producibility. At this key pre-Entry into Service (EIS) phase of the GE9X program, you will play a critical role in preparing the team to identify cost and producibility ideas, oversee projects for the module, while also leading and executing on cost out and producibility design changes to implement before EIS and beyond. You will serve as the main focal for cost and producibility efforts within the Combustor module focused on redesigning for cost and producibility. As the GE9X Combustor Module Cost & Producibility Staff Engineer, your judgement will be paramount in the success of the desired team outcomes which will require you to have the ability to propose different solutions outside of set parameters with advice from your peers. At a job at this level you will work closely with cross functional partners to develop in-depth knowledge and expertise to make technically sound decisions with some level of evidence. You will act in the capacity of an individual contributor with proven interpersonal skills, execute the design, analysis, or evaluation of assigned projects using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements. **Job Description** **Roles and Responsibilities** + Support all design, procurement, producibility and delivery activities for GE9X combustor module parts, enabling problem solving across additive part within the engine line. + Own Cost plans for the Combustor module, ensuring plans are in place, executed per plan and problem solved when pressures are realized. + Own producibility plans for the Combustor module focused on design changes, ensuring plans are in place, executed per plan and problem solved when pressures are realized. + Execute the design, analysis, and evaluation of assigned cost projects using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements + Basic understanding of key business drivers; uses this understanding to accomplish own work. Good understanding of how work of own team integrates with other teams and contributes to the area. + Work with a variety of engineering organizations and contribute to the development of the engine systems and designs. + Develop in-depth knowledge of the technical discipline + Prepare and present technical data to internal and external customers + Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures. + Resolves issues in situations within current technical knowledge base and judgment within established procedures. Consults more senior team members for issues outside of defined instructions/parameters. + Be responsible for monitoring and communicating project status to Engineering leadership. Provide timely communications on significant issues or developments. + Participate as a presenter in technical and program reviews **Required Qualifications** + Bachelor's or advanced degree in engineering from an accredited university or college + Minimum of 5 years of experience in relevant engineering roles, including mechanical design engineering. + Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. **Desired Characteristics** -- Bachelor's or advanced degree in mechanical or aerospace engineering from an accredited university or college -- 10+ years of experience in relevant engineering roles with a focus on cost and producibility design changes including the following skills + Demonstrated expertise in design and analysis tools, such as Unigraphics/NX, ANSYS classic and ANSYS Workbench. + Presenting at design reviews or technical reviews. + Experience and familiarity with GD&T principles and reading drawings. + Ability to design components and systems that are easy and cost-effective to manufacture. + Familiarity with lean methodologies to identify waste and optimize processes. + Ability to perform cost breakdowns, identify cost drivers, and evaluate cost-saving opportunities. + Proficiency in analyzing data to identify trends, inefficiencies, and opportunities for improvement. + Capability to assess risks associated with design changes and their impact on safety, quality, delivery, and cost (SQDC). -- 3+ years of experience leading projects or teams with established project management and structured problem-solving skills, including a track record of + Strong leadership skills, with the ability to influence others and lead small teams. + Ability to analyze & solve technical design challenges with sound documentation, planning, & program management skills. + Ability to independently organize, document, plan and execute simultaneous projects while aligning with business priorities. + Experience in managing the impact of design changes on production, supply chain, and customer requirements. -- Familiarity with and ability to leverage FLIGHT DECK, GE Aerospace's proprietary LEAN operating model. + Commitment to driving ongoing improvements in cost and producibility through structured methodologies like Kaizen or Hoshin Kanri. + Understanding customer needs and ensuring design changes align with their requirements. Better fuel burn. Better flight range. We've got that! Our customers are hungry for the 20% fuel burn advantage that the combined system provides, with flight range that enables flights between city pairs that simplify intercontinental travel. Learn more about the GE9X engine here (************************************************************* . \#LI-MF1 _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Can you help us develop the future of flight? We're advancing flight for our customers, and we need engineers who can help us innovate. The GE Aerospace Engineering Team is looking for experienced mechanical design engineers who are ready to work on the fastest growing engine in Aviation history, GE9X. The GE9X engine is forecasted to enter service in 2027, creating a generational opportunity to be part of a team introducing a widebody aircraft and engine system to the field. Within the Lifecycle Engineering team, as the GE9X Combustor Module Cost & Producibility Staff Engineer you will collaborate within the combustor module to implement design changes that reduce costs and enhance producibility. At this key pre-Entry into Service (EIS) phase of the GE9X program, you will play a critical role in preparing the team to identify cost and producibility ideas, oversee projects for the module, while also leading and executing on cost out and producibility design changes to implement before EIS and beyond. You will serve as the main focal for cost and producibility efforts within the Combustor module focused on redesigning for cost and producibility. As the GE9X Combustor Module Cost & Producibility Staff Engineer, your judgement will be paramount in the success of the desired team outcomes which will require you to have the ability to propose different solutions outside of set parameters with advice from your peers. At a job at this level you will work closely with cross functional partners to develop in-depth knowledge and expertise to make technically sound decisions with some level of evidence. You will act in the capacity of an individual contributor with proven interpersonal skills, execute the design, analysis, or evaluation of assigned projects using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements. Job Description Roles and Responsibilities * Support all design, procurement, producibility and delivery activities for GE9X combustor module parts, enabling problem solving across additive part within the engine line. * Own Cost plans for the Combustor module, ensuring plans are in place, executed per plan and problem solved when pressures are realized. * Own producibility plans for the Combustor module focused on design changes, ensuring plans are in place, executed per plan and problem solved when pressures are realized. * Execute the design, analysis, and evaluation of assigned cost projects using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements * Basic understanding of key business drivers; uses this understanding to accomplish own work. Good understanding of how work of own team integrates with other teams and contributes to the area. * Work with a variety of engineering organizations and contribute to the development of the engine systems and designs. * Develop in-depth knowledge of the technical discipline * Prepare and present technical data to internal and external customers * Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures. * Resolves issues in situations within current technical knowledge base and judgment within established procedures. Consults more senior team members for issues outside of defined instructions/parameters. * Be responsible for monitoring and communicating project status to Engineering leadership. Provide timely communications on significant issues or developments. * Participate as a presenter in technical and program reviews Required Qualifications * Bachelor's or advanced degree in engineering from an accredited university or college * Minimum of 5 years of experience in relevant engineering roles, including mechanical design engineering. * Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Desired Characteristics * - Bachelor's or advanced degree in mechanical or aerospace engineering from an accredited university or college * - 10+ years of experience in relevant engineering roles with a focus on cost and producibility design changes including the following skills * Demonstrated expertise in design and analysis tools, such as Unigraphics/NX, ANSYS classic and ANSYS Workbench. * Presenting at design reviews or technical reviews. * Experience and familiarity with GD&T principles and reading drawings. * Ability to design components and systems that are easy and cost-effective to manufacture. * Familiarity with lean methodologies to identify waste and optimize processes. * Ability to perform cost breakdowns, identify cost drivers, and evaluate cost-saving opportunities. * Proficiency in analyzing data to identify trends, inefficiencies, and opportunities for improvement. * Capability to assess risks associated with design changes and their impact on safety, quality, delivery, and cost (SQDC). * - 3+ years of experience leading projects or teams with established project management and structured problem-solving skills, including a track record of * Strong leadership skills, with the ability to influence others and lead small teams. * Ability to analyze & solve technical design challenges with sound documentation, planning, & program management skills. * Ability to independently organize, document, plan and execute simultaneous projects while aligning with business priorities. * Experience in managing the impact of design changes on production, supply chain, and customer requirements. * - Familiarity with and ability to leverage FLIGHT DECK, GE Aerospace's proprietary LEAN operating model. * Commitment to driving ongoing improvements in cost and producibility through structured methodologies like Kaizen or Hoshin Kanri. * Understanding customer needs and ensuring design changes align with their requirements. Better fuel burn. Better flight range. We've got that! Our customers are hungry for the 20% fuel burn advantage that the combined system provides, with flight range that enables flights between city pairs that simplify intercontinental travel. Learn more about the GE9X engine here. #LI-MF1 This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

The Facilities Electrical Engineer will be responsible for leading and assisting in the design, operations, maintenance, and optimization of all facility and utility electrical systems within our site. **Job Description** **Roles and Responsibilities** + Performing technical work specific to electrical, equipment review, etc. Sign off on engineering design & certifications. Work with external vendors. + Make sure new designs meet GE Aerospace and industry standards for all regulatory and safety requirements. + Diagnose and resolve electrical and utility system issues to minimize downtime and ensure operational continuity. + Collaborate with cross-functional teams to address facility electrical related challenges. + Develop new solutions under guidance and / or in a team setting or based upon precedents in the organizations + Work together with business leadership at SPB and EB levels + Specify needs, communicate about project approach and present outcomes of research done + Developing in-depth knowledge of a technical discipline. Uses prior experience and acquired technical expertise to execute policy/strategy. + In-depth understanding of key business drivers; uses this understanding to accomplish own work. In-depth understanding of how work of own team integrates with other teams and contributes to the area. + Uses some level of judgment and has ability to propose different solutions outside of set parameters but with guidance. Uses prior experience and on-the-job training to solve straightforward tasks. Has access to technical skills and analytic thinking required to solve problems. May use multiple internal sources outside of own team to arrive at decisions. + A job at this level is likely to be an individual contributor with proven interpersonal skills or an early people leader who can hire and develop talent. Provides informal guidance to new team members **Required Qualifications** + Bachelor's Degree from an accredited college or university (or a high school diploma/GED with a minimum of 4 years Electrical Engineering experience + minimum of 3 years high voltage experience **Desired Characteristics** + Effective problem identification and solution skills + Proven analytical and organizational ability + Experience specifying, installing, testing and operating electrical equipment + Experience with voltage levels for equipment vary from 138KV, 480 V and 280/120V + Supporting maintenance teams + Lighting controls + Power monitoring and metering equipment + Arc Flash studies and power protection schemes + Directing and organizing groups of electricians + Experience with NFPA 70, 70 B and 70E GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

The Facilities Electrical Engineer will be responsible for leading and assisting in the design, operations, maintenance, and optimization of all facility and utility electrical systems within our site. Job Description Roles and Responsibilities * Performing technical work specific to electrical, equipment review, etc. Sign off on engineering design & certifications. Work with external vendors. * Make sure new designs meet GE Aerospace and industry standards for all regulatory and safety requirements. * Diagnose and resolve electrical and utility system issues to minimize downtime and ensure operational continuity. * Collaborate with cross-functional teams to address facility electrical related challenges. * Develop new solutions under guidance and / or in a team setting or based upon precedents in the organizations * Work together with business leadership at SPB and EB levels * Specify needs, communicate about project approach and present outcomes of research done * Developing in-depth knowledge of a technical discipline. Uses prior experience and acquired technical expertise to execute policy/strategy. * In-depth understanding of key business drivers; uses this understanding to accomplish own work. In-depth understanding of how work of own team integrates with other teams and contributes to the area. * Uses some level of judgment and has ability to propose different solutions outside of set parameters but with guidance. Uses prior experience and on-the-job training to solve straightforward tasks. Has access to technical skills and analytic thinking required to solve problems. May use multiple internal sources outside of own team to arrive at decisions. * A job at this level is likely to be an individual contributor with proven interpersonal skills or an early people leader who can hire and develop talent. Provides informal guidance to new team members Required Qualifications * Bachelor's Degree from an accredited college or university (or a high school diploma/GED with a minimum of 4 years Electrical Engineering experience + minimum of 3 years high voltage experience Desired Characteristics * Effective problem identification and solution skills * Proven analytical and organizational ability * Experience specifying, installing, testing and operating electrical equipment * Experience with voltage levels for equipment vary from 138KV, 480 V and 280/120V * Supporting maintenance teams * Lighting controls * Power monitoring and metering equipment * Arc Flash studies and power protection schemes * Directing and organizing groups of electricians * Experience with NFPA 70, 70 B and 70E GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Are you ready to see your future take flight? At GE Aerospace, we believe the world works better when it flies. We are a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen. **Job Description** Job Summary: Help invent the future of flight, lift people up, and bring them home safely as a GE Aerospace intern or co-op! You'll build professional and technical skills in an aerospace systems & defense role working on challenging, real-world problems to design aerospace systems for commercial and military applications & support through service life. Build relationships with interns/coops and leaders and prepare for a potential full-time position after graduation in one of our fantastic leadership programs or a direct hire opportunity. You will gain broad exposure to the engineering field with an array of opportunities ranging from design & analysis to working hands-on with aerospace systems. Ultimately, you'll be placed taking your preferences into account while also considering your major, year of schooling, and business needs at the time of placement. Essential Responsibilities: An Aerospace Systems & Defense intern/co-op may experience work in the development of engine controls, navigation, & guidance systems; gas turbine engine components; electrical power systems; mechanical systems; vehicle health & data management systems; mission systems; computing systems; and platform systems integration. Responsibilities may include design, analysis, development, and testing, writing software requirements, software testing, simulation, tool development and product/program support. Qualifications/Requirements: + Minimum 3.0 cumulative GPA off a 4.0 scale without rounding. + Attending a full time matriculated and nationally accredited baccalaureate or graduate program in engineering (degrees accepted: Electrical Engineering, Electrical & Computer Engineering, Computer Engineering, Computer Science). + Willingness and ability to work in the United States; primary locations are: Dayton, OH. + Reliable transportation, many of our sites do not have public transportation available. Eligibility Requirements: Any offer of employment is conditioned upon the successful completion of a background investigation and drug screen. Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Desired Characteristics: + A solid commitment to a career in technology and a passion for engineering + Humble: respectful, receptive, agile, eager to learn + Transparent: shares critical information, speaks with honesty, contributes constructively + Focused: quick learner, strategically prioritizes work, committed, and takes initiative + Leadership ability: strong communicator, decision-maker, and collaborative teamwork + Problem solver: analytical-minded, challenge existing processes, critical thinker + Strong knowledge of computer and Microsoft products + Proficiency in at least one programming language Benefits: Pay rates for this position begin at $20/hour and increase for each undergraduate year completed. Relocation support and housing assistance is available for those who relocate to a new city. Equal Opportunity Employer: _GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an_ Equal Opportunity Employer (******************************************************************************************************************************************************** _._ _Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law._ _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Are you ready to see your future take flight? At GE Aerospace, we believe the world works better when it flies. We are a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen. Job Description Job Summary: Help invent the future of flight, lift people up, and bring them home safely as a GE Aerospace intern or co-op! You'll build professional and technical skills in an aerospace systems & defense role working on challenging, real-world problems to design aerospace systems for commercial and military applications & support through service life. Build relationships with interns/coops and leaders and prepare for a potential full-time position after graduation in one of our fantastic leadership programs or a direct hire opportunity. You will gain broad exposure to the engineering field with an array of opportunities ranging from design & analysis to working hands-on with aerospace systems. Ultimately, you'll be placed taking your preferences into account while also considering your major, year of schooling, and business needs at the time of placement. Essential Responsibilities: An Aerospace Systems & Defense intern/co-op may experience work in the development of engine controls, navigation, & guidance systems; gas turbine engine components; electrical power systems; mechanical systems; vehicle health & data management systems; mission systems; computing systems; and platform systems integration. Responsibilities may include design, analysis, development, and testing, writing software requirements, software testing, simulation, tool development and product/program support. Qualifications/Requirements: * Minimum 3.0 cumulative GPA off a 4.0 scale without rounding. * Attending a full time matriculated and nationally accredited baccalaureate or graduate program in engineering (degrees accepted: Electrical Engineering, Electrical & Computer Engineering, Computer Engineering, Computer Science). * Willingness and ability to work in the United States; primary locations are: Dayton, OH. * Reliable transportation, many of our sites do not have public transportation available. Eligibility Requirements: Any offer of employment is conditioned upon the successful completion of a background investigation and drug screen. Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Desired Characteristics: * A solid commitment to a career in technology and a passion for engineering * Humble: respectful, receptive, agile, eager to learn * Transparent: shares critical information, speaks with honesty, contributes constructively * Focused: quick learner, strategically prioritizes work, committed, and takes initiative * Leadership ability: strong communicator, decision-maker, and collaborative teamwork * Problem solver: analytical-minded, challenge existing processes, critical thinker * Strong knowledge of computer and Microsoft products * Proficiency in at least one programming language Benefits: Pay rates for this position begin at $20/hour and increase for each undergraduate year completed. Relocation support and housing assistance is available for those who relocate to a new city. Equal Opportunity Employer: GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

The Aerodynamics Staff Engineer will report to the Turbine Aerodynamics Manager and be responsible for leading the design of GE Aerospace's next generation of turbine components and associated technologies. **Job Description** **Essential Responsibilities** + Lead the aerodynamic design and analysis of high- and low-pressure turbine components + Perform advanced aero-thermal computational fluid dynamics analyses under the supervision of a project leader or controlled title holder. + Drive the development of advanced aerodynamic technology to improve engine performance and durability + Cultivate advanced skills in aerodynamic design, including use of cutting-edge numerical and experimental techniques + Draw conclusions from component and engine test data to validate aerodynamic designs + Develop analytical tools/software to improve aerodynamic design and predictive capabilities + Formulate and execute plans to achieve technical and program requirements + Develop lean processes to improve organizational productivity and efficiency + Execute trade studies to meet project requirements, collaborating with horizontal organizations + Leads program issue resolution efforts to meet customer and/or regulatory expectations across organization + Strong coaching, mentoring, and training skills within the domain, site, or organization, with a focus on engaging early-career personnel. **Qualifications/Requirements** + Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. + Master's Degree from an accredited college/university in Aerospace Engineering or Mechanical Engineering, or related discipline with an emphasis in aerodynamics, aero-thermal, or aeromechanics and a minimum of 6 years of relevant technical experience. OR + PhD from an accredited college/university in Aerospace Engineering or Mechanical Engineering, or related discipline with an emphasis in aerodynamics, aero-thermal, or aeromechanics and a minimum of 4 years of relevant technical experience. **Desired Characteristics** + Master's Degree in Aerospace or Mechanical Engineering relevant to turbomachinery aerodynamics with minimum of 6 years of engineering experience OR Doctorate Degree in Aerospace or Mechanical Engineering focused on aerodynamics/compressible flows + Knowledge of Computational Fluid Dynamics (CFD) and/or aerodynamic testing techniques + Self-starter, utilizing innovative problem solving to drive solutions on complex issues + Flexible, friendly, and inclusive; comfortable working in multi-disciplinary global teams + Demonstrated group facilitation and collaboration skills + Exceptional communication skills, comfortable preparing and giving impactful technical presentations + Highly motivated and passionate + Keen listener and innately driven to succeed _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

The Aerodynamics Staff Engineer will report to the Turbine Aerodynamics Manager and be responsible for leading the design of GE Aerospace's next generation of turbine components and associated technologies. Job Description Essential Responsibilities * Lead the aerodynamic design and analysis of high- and low-pressure turbine components * Perform advanced aero-thermal computational fluid dynamics analyses under the supervision of a project leader or controlled title holder. * Drive the development of advanced aerodynamic technology to improve engine performance and durability * Cultivate advanced skills in aerodynamic design, including use of cutting-edge numerical and experimental techniques * Draw conclusions from component and engine test data to validate aerodynamic designs * Develop analytical tools/software to improve aerodynamic design and predictive capabilities * Formulate and execute plans to achieve technical and program requirements * Develop lean processes to improve organizational productivity and efficiency * Execute trade studies to meet project requirements, collaborating with horizontal organizations * Leads program issue resolution efforts to meet customer and/or regulatory expectations across organization * Strong coaching, mentoring, and training skills within the domain, site, or organization, with a focus on engaging early-career personnel. Qualifications/Requirements * Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. * Master's Degree from an accredited college/university in Aerospace Engineering or Mechanical Engineering, or related discipline with an emphasis in aerodynamics, aero-thermal, or aeromechanics and a minimum of 6 years of relevant technical experience. OR * PhD from an accredited college/university in Aerospace Engineering or Mechanical Engineering, or related discipline with an emphasis in aerodynamics, aero-thermal, or aeromechanics and a minimum of 4 years of relevant technical experience. Desired Characteristics * Master's Degree in Aerospace or Mechanical Engineering relevant to turbomachinery aerodynamics with minimum of 6 years of engineering experience OR Doctorate Degree in Aerospace or Mechanical Engineering focused on aerodynamics/compressible flows * Knowledge of Computational Fluid Dynamics (CFD) and/or aerodynamic testing techniques * Self-starter, utilizing innovative problem solving to drive solutions on complex issues * Flexible, friendly, and inclusive; comfortable working in multi-disciplinary global teams * Demonstrated group facilitation and collaboration skills * Exceptional communication skills, comfortable preparing and giving impactful technical presentations * Highly motivated and passionate * Keen listener and innately driven to succeed This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Drives initiatives to improve the effectiveness of the Engineering function and interfaces with other functions to provide effective coordination of Operations, via integrated master schedule, metrics, and dashboard management. Impacts the team's ability to achieve Safety, Quality, Delivery, Cost objectives. The role is subject to operating policy objectives. There is moderate autonomy within the role. High levels of operational judgment are required to achieve outcomes required. Job Description Roles and Responsibilities * Manages integrated master schedule for the organization, inclusive of managing interfaces and driving program execution. * Initiates, creates, and manages metrics for program deliverables across functions and management levels. * Coordinates cross-functionally, maintaining and improving upon current schedule and task management. * Requires specialized knowledge within the function. Influence the development of strategy for the area of responsibility. * Supports budget and resource management, and interfaces with contractors, suppliers, customers and internal functions. * Supports the program to meet customer critical to quality requirements (CTQ's). * Interprets simple internal and external business challenges and recommends best practices to improve processes or services. Stays informed of industry trends that may inform work. * Uses high level of judgment to make decisions and handle complex tasks or problems in areas of operations or engineering. Has ability to assess quality of information given and ask pertinent questions to stakeholders. * Able to offer new solutions to problems outside of set parameters and is able to construct and provide recommendations. Uses multiple internal and some external sources outside of own function to help arrive at a decision. * May lead functional teams or projects with minimal resource requirements, risk, and/or complexity. * Communicates difficult concepts and may influence others' options on particular topics. May guide others to consider a different point of view. * Coordination across Future of Flight Programs as well as the FLIGHT DECK support team. Required Qualifications * Bachelor's Degree in Engineering/Technology related discipline from accredited University or College * Minimum of 5 years' experience in Aerospace Engineering (or Supply Chain role) Desired Characteristics * Master's degree from accredited university or college * Exposure to Program Management process within Aerospace Industry * Knowledge of Aerospace budget & resource planning process * Experience in leading project execution and task management * Prior NPI and/or Technology Maturation experience GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Are you ready to see your career take flight? At GE Aerospace, we believe the world works better when it flies. We are a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen. The Airworthiness & Certification (A&C) Office promotes regulatory compliance and safety at GE Aerospace. As experts in regulatory and compliance processes, the A&C office navigates the regulatory landscape from initial engine certification through the entire engine product life cycle. A GE Aerospace A&C Engineer serves as a focal for a commercial engine product line as a subject matter expert in airworthiness and certification, leads interactions with the agency in the Continued Operational Safety (COS) of our fielded engine fleets, and is a liaison to the Federal Aviation Administration (FAA) and other Foreign Civil Aviation Authorities (FCAAs). The A&C engineer also functions as an Organization Designation Authorization (ODA) Engineering Unit Member (EUM), authorized to approve data, witness tests, and perform other functions on behalf of the FAA. Roles and Responsibilities * Represent GE Aerospace when interfacing with FAA or FCAAs (Foreign Civil Aviation Authorities) on Engineering, continued operational safety, and certification issues * Achieve authorization as an ODA EUM and finding compliance to FAA 14 CFR part 33 regulations * Demonstrate leadership in communicating business goals, programs, and processes for an area or business segment * Utilize experience or expertise to solve problems, develop and execute objectives for self and others, and have the ability to affect short-term and some long-term business goals * Execute with some guidance the analysis / evaluation of assigned projects that meet business standards, practices and procedures and the product / program requirements * Provide technical leadership to other personnel assigned to support the effort on assigned projects and/or tasks * Mentor others in the organization * Document technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures * Monitor and communicate project status, business issues and significant developments * Participate as a presenter or reviewer in technical and program reviews * Define, develop, and improve business processes related to certification to improve quality and productivity within Airworthiness and Certification Required Qualifications * Bachelor's Degree in Engineering from an accredited college or university. * Minimum of 8 years of progressively responsible engineering experience in aerospace, with at least 4 years recent experience working directly in aerospace design and systems. * Minimum of 5 years of experience working directly with compliance to FAA airworthiness standards * Minimum of 6 years of technical leadership in areas of aircraft engine design and systems with a strong foundation in relevant aerospace engineering disciplines like aerodynamics, materials science, propulsion, and systems engineering Desired Characteristics * Strong interpersonal and leadership skills * Strong oral and written communication skills * Demonstrated process orientation in approach to work * Significant commercial aircraft engine design and engine test experience of new and/or modified engine models * Knowledge of non-US aviation regulations, especially those of the European Aviation Safety Agency, such as CS-E * Demonstrated experience in certification activities for a commercial aircraft engine program, working with the FAA Certification Office staff or with an ODA Unit * Demonstrated effectiveness in navigating challenging (technical) decisions and communicating complex information to drive understanding and achieve desired outcomes within the regulatory framework * Knowledge of commercial airframe-propulsion integration and its impacts * Knowledge of operator utilization and impact of field plans on engine operations within Continued Operational Safety framework of commercial fleet * Experience building and fostering positive external (technical) relationships Additional Job Description: This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents or U.S. Citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), final offers will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunities Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. #LI-JR1 This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes