Manufacturing engineer jobs in Blaine, MN - 1,167 jobs

Loeffler Construction & Consulting is looking for a full-time Sr. Project Engineer! Best Places to Work 2023 & 2025 - Minneapolis/St. Paul Business Journal Are you curious, hard-working, and like to make a difference? Loeffler is seeking a highly detailed individual to join the construction team. The Senior Project Engineer is responsible for planning, coordinating, scheduling, supervising, and monitoring on-site construction engineering activities for a project. Essential Duties and Responsibilities The Sr. Project Engineer is responsible for timely and accurate performance in fundamental, routine construction-related tasks for both project management and field construction activities. Depending on the size and/or scope of the project, the Sr. Project Engineer will assist the Project team with responsibilities including, but not limited to: Supporting the oversight and management of multiple projects from preconstruction through the closeout/warranty period Assist the Pre-Construction team with activities and assignments, including estimates Serve as the technical liaison between the design team and the field Prepare detailed schedules (including Pre-Con, Procurement, Construction, and Close-out), and monitor and update schedules weekly. Utilize look-ahead schedules and collaborate with the team Anticipate client needs, document updates, and track progress with regular communication. Managing all project document control within Procore Lead OAC/trade partner meetings, prepare agendas, and run progress meetings, Owner/Architect meetings, and subcontractor pre-installation meetings. Accurately document meeting discussions and distribute meeting minutes within 48 hours Process submittals and RFI's, and work with the Site Superintendent to determine tasks requiring prioritization Education Requires a bachelor's degree in Construction, Engineering, Architecture, or a related field preferred Skills, Abilities, Competencies, and Qualifications Minimum of four years (4+) of experience required Communication: Excellent interpersonal communication, attention to detail, and organizational skills Continuous Improvement: Stays up to date on the industry, best practices, relevant articles, and takes advantage of events to further educate and promote professional growth Accountability: Holds oneself accountable for assigned responsibilities, meets deadlines, works independently, maintains focus, and remains punctual Initiative: Self-starter, takes action, seeks new opportunities, and strives to see projects to completion Budget Management: Uses resources efficiently, strives to reduce costs, and acts as a part of the budgeting process Advanced knowledge of Microsoft Office Suite OSHA 30 Hour Certification preferred Physical Demands and Work Environment The physical requirements listed here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Benefits There is a generous benefit offering, including: Medical, Dental, Vision, STD/LTD, Life, PTO, 401k, just to name a few. To view a full description, visit: *****************************************

Sr. Quality Engineer - 2nd Shift Schedule: Monday - Friday, 3:00 PM to 11:30 PM We're partnering with a leading aerospace manufacturer in the Chaska area that's looking to add a talented Sr. Quality Engineer to their 2nd shift team. This is a hands-on engineering role where you'll work closely with production, suppliers, and leadership to maintain and improve quality systems that meet the rigorous standards of the aerospace industry. Key Responsibilities: Support and lead quality initiatives on the production floor during 2nd shift operations Conduct root cause analysis and implement corrective/preventive actions (CAPA) Develop and maintain inspection processes, documentation, and test procedures Partner with engineering and manufacturing teams to ensure design and production quality compliance Participate in audits and maintain compliance with AS9100 and customer requirements Utilize data-driven methods to identify trends and drive continuous improvement Qualifications: Bachelor's degree in Engineering, Quality, or related technical field 4+ years of experience in Quality Engineering within aerospace, defense, or a regulated manufacturing environment Working knowledge of AS9100 or ISO 9001 standards Strong analytical, communication, and problem-solving skills Ability to work independently and collaboratively on 2nd shift Why Join: 5-day work week (Monday - Friday) Competitive compensation and comprehensive benefits package Opportunity to make a direct impact on critical aerospace programs Strong, team-oriented culture with long-term growth potential If you're an experienced Quality Engineer ready to step into a senior-level role in a respected aerospace environment, we'd love to connect.

Thank you for your interest in becoming part of the team at Legrand! GENERAL PURPOSE To provide day to day support on products being built in the manufacturing assembly area(s). This would include working with the assembly team in the identification of continuous improvement ideas that utilize lean manufacturing principles. These improvements would target processes and procedures that will enhance the quality and repeatability of the assembly process and increase productivity. DUTIES AND ACCOUNTABILTIES Identify process and assembly improvements and work with VP of Manufacturing and Operations and Assembly Manager to implement improvement ideas into the manufacturing area using lean manufacturing principles. Provide troubleshooting support to the manufacturing floor Create and maintain manufacturing processes and procedures Provide input on the design of new product line assembly cells and implement their setup Provide process and procedural training to assembly personnel Participate in new product design reviews to identify design for manufacturability (DFM) issues and opportunities Review assembly documentation for accuracy through ECO reviews Work with packaging vendors to design custom packaging solution for high volume assemblies Design and implement assembly fixtures that will increase efficiencies on the manufacturing floor Provide Return on Investment (ROI) justification on capital expenditures Understand workplace hazards and take steps to proactively prevent and report hazards or injuries in the workplace. Cooperate in Safety Programs, initiatives, and investigations. Demonstrate our five core values of Integrity, Customer Responsiveness, Innovation, Passionate Contribution & Empowerment and Continuous Improvement JOB REQUIREMENTS Essential Knowledge, Skills and Abilities Required: Excellent verbal and written communication skills Strong mechanical aptitude with ability to read and understand mechanical drawings, electronic schematics and PCB layouts Excellent troubleshooting and problem solving skills Ability to examine component issues and required changes Ability to interpret standards, specifications, procedures, drawings, etc. Basic understanding of embedded programming and the ability to read C++ language An understanding of lean manufacturing principles Excellent interpersonal skills with the ability to work in a team environment Proficient in the use of personal computers, internet and Microsoft Office suite of software including Word, Excel and Outlook (or related e-mail system) Self-motivated with the ability to work with minimal supervision Ability to train and motivate employees at all levels Ability to make sound decisions within established guidelines Ability to demonstrate flexible and efficient time management and to appropriately prioritize workload based upon organization or department needs Be detail-oriented and have excellent follow-through skills Must possess high degree of professionalism Minimum Education and Experience Required: Bachelor of Science degree in electrical, manufacturing, industrial engineering or related technical degree with a minimum of 3+ years engineering experience in an electro mechanical assembly environment; or combination of relevant education and experience 3D CAD work experience Board testing experience Special Job Requirements: Must be available for extended, varied work hours based on business need Preferred Qualifications: Lean Six Sigma certification Experience in manufacturing / cell production environments Experience with Solidworks Experience with SAP Familiar with MRP systems Labeling software experience Machine shop experience WORKING CONDITIONS/PHYSICAL DEMANDS While performing the duties of this job, the employee may be required to reach above shoulder level, reach below knee level, bend, stoop, squat/kneel, climb; and lift, push or pull 50 lbs. Must have the ability to make coordinated movements of the fingers and hands to grasp, manipulate, and to perform data entry on a keyboard. Combination general office and regular shop assembly/distribution center environment May require regular ground travel to other company facilities within local metropolitan area Note: Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Legrand is proud to be an Equal Opportunity Employer. You will be considered for this position based upon your experience and education, without regard to race, color, religion, age, sex, national origin, sexual orientation, ancestry; marital, disabled or veteran status. We are committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment. If you'd like to work in a fun, creative, business-casual environment that offers a comprehensive benefit package, we encourage you to apply! Legrand is an equal employment opportunity employer. For California residents, please see the link for the Privacy Notice for Candidates. California law requires that we provide you this notice about the collection and use of your personal Information.

No third- party vendors will be accepted. Please do not respond/reach out. Logisolve is seeking a Manager, Business Process Engineering for a 6-month contract to hire position with our direct Healthcare company. The Manager collaborates closely with cross-functional leaders, vendors and employees at all levels. We have adopted a holistic approach to Lean Six Sigma where we identify Process Owners for ongoing continuous improvement in seven key Value Streams. Each Value Stream is supported by a Manager and Business Consultant that evaluates, documents, designs, manage and monitors the end-to-end processes and underlying systems through the continuous application of Lean principles. This position plays a leading role in transitioning to implementation to ensure changes stick, using additional skills in project management and organizational change management (OCM). This position may have multiple headcount accountability. Qualifications: Bachelor's degree or equivalent experience in related field, plus 7+ years of related work experience beyond degree within Business Process Management (BPM), Business Analytics, Program and Project Management, Business Operations, etc. Health Plan/Payer and/or Healthcare experience (7+ years required) Plateform Migration experience preferred. Knowledge of Healthrules and/or Cosmos preferred Proven leadership ability across large cross functional teams required Continuous improvement and implementation experience required Program and Project Management experience required Required License/Certification: Lean Six Sigma Black Belt required Preferred Qualifications: Demonstrated experience managing day-to-day supervision of Business Process Consultants Mastery over all Six Sigma concepts and tools including Value Stream Mapping, Kaizen events, A3, Kanban boards, 5 Whys, FMEA, etc. Functional understanding of Agile methodology preferred Hands-on change management experience preferred Skills and Abilities: Client focused program, project, and process management experience including operational and cross-functional workflows Proven ability to formulate content and present clearly both internally and externally Experience creating, building, and leading cross functional teams from conception through implementation Advanced level of proficiency with Microsoft Teams, Visio, Smartsheet, PowerPoint & SharePoint Experience working with Business and Technology to design future state Hands on experience doing and driving work - not coaching Logisolve offers medical, dental, vision, life insurance, short-term disability, long-term disability, paid sick leave, and retirement benefits to eligible employees.

ID 2025-17983 Element has an opportunity for a Metallurgical Engineer. In this role, you will work with engineers and technicians to direct and perform tasks related to metallurgical materials testing including metallography, mechanical testing, and sample preparation. Salary: $60,000.00 - $75,000.00/yr DOE Responsibilities * Prepare, polish, and etch metallographic samples * Perform a variety of metallurgical evaluations including, but not limited to; microhardness, banding, carburization/decarburization, pitting, grain size, intergranular attack, macroetching, coating thickness, microetching, coating weight, general microstructure evaluations, etc. * Perform physical testing such as tensile, hardness, bend testing, and Charpy impact testing * Interpret data, review, and report testing results * Possess strong inter-personal skills for verbal and written communication with customers * Perform equipment calibration and preventative maintenance * Manage and order lab supplies as needed * Participate in personal training, cross training of employees, and continued learning of testing techniques Skills / Qualifications * Bachelor's (B.S.) degree in Materials Science or a related field * 2-4 years related work experience preferred but not necessary * Interest in welding or CWI certification preferred Company Overview Element is one of the fastest growing testing, inspection and certification businesses in the world. Globally we have more than 9,000 brilliant minds operating from 270 sites across 30 countries. Together we share an ambitious purpose to 'Make tomorrow safer than today'. When failure in use is not an option, we help customers make certain that their products, materials, processes and services are safe, compliant and fit for purpose. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access. While we are proud of our global reach, working at Element feels like being part of a smaller company. We empower you to take charge of your career, and reward excellence and integrity with growth and development. Industries across the world depend on our care, attention to detail and the absolute accuracy of our work. The role we have to play in creating a safer world is much bigger than our organization. Diversity Statement At Element, we always take pride in putting our people first. We are an equal opportunity employer that recognizes diversity and inclusion as fundamental to our Vision of becoming "the world's most trusted testing partner". All suitably qualified candidates will receive consideration for employment on the basis of objective work related criteria and without regard for the following: age, disability, ethnic origin, gender, marital status, race, religion, responsibility of dependents, sexual orientation, or gender identity or other characteristics in accordance with the applicable governing laws or other characteristics in accordance with the applicable governing laws. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) "If you need an accommodation filling out an application, or applying to a job, please email "

Basic Qualifications Candidates should demonstrate a thorough understanding of engineering technology. Engineering Interns must be enrolled in an accredited degree program in Computer Engineering, Systems Engineering, Software Engineering, Electrical Engineering, Mechanical Engineering or other related scientific or technical discipline with a preference for a standing of a sophomore or higher. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position REPRESENTATIVE DUTIES AND TASKS: Apply your classroom-learned skills to a program supporting the defense of our country. GDMS has an immediate opening for an Engineering Intern to join our Manufacturing Quality Team. The position provides an opportunity to work on projects that support some of our nation's fundamental defense services. GDMS employees work closely with esteemed customers to develop solutions that allow them to carry out high-stakes national security missions. The selected candidate will work with collaborative teams on various technical projects associated with our core mission. In addition to receiving a competitive wage, the Engineering Intern will enhance their skill set by working among a talented and technically accomplished group of colleagues. Interns will also enjoy a flexible work environment where contributions are recognized and rewarded. As a member of the Manufacturing Quality Team, the Engineering Intern will be an active participant in ensuring quality across the manufacturing facility, gaining valuable experience in enforcing quality requirements in the highly-regulated aerospace manufacturing environment. The principles and tools learned in this position can be utilized in any environment where product is being manufactured. The person in this role can expect to take part in activities such as: - Root Cause Corrective Action (RCCA) - Stock Sweeps - First Article Inspection Reports (FAIR) - Validating defective product dispositions to J-STD-001 - Collaborate with cross-functional teams to solve real and current problems facing the manufacturing plant Quality is crucial to every workplace, and GDMS is excited to present the opportunity for you to grow in this valuable field. Salary Note This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Combined Salary Range USD $30.45 - USD $0.30 /Yr. Company Overview General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 12,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high-performance team! Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. About the Role Caterpillar's Manufacturing, Supply Chain, and Order-to-Delivery (MSOD) Intern program seeks students currently enrolled in a four-year university to work alongside manufacturing professionals to learn and apply themselves to project work within their teams. Interns will have assignments that provide them with experience and significant learning opportunities. In addition to this work, Interns can network with management throughout the company to learn about Caterpillar areas outside their assigned team. Students can deepen their business skills in their assignments through team and business partner interactions, develop their skills, conduct presentations, and measure their success through the performance and evaluation process. What You Will Do You'll join a team with diverse project responsibilities and have valuable networking opportunities with all levels of Caterpillar employees. The internship is a 40-hour-per-week assignment lasting 12 weeks. You'll join a team with diverse project responsibilities and have experiences including (but not limited to): * Manufacturing Engineering : Responsible and accountable for enhancements and modifications to equipment and processes in our facilities, monitoring equipment and process reliability, identifying and addressing problem areas and providing engineering support on equipment, processes, or facilities * Quality: Analyzing non-conformance data and maintaining quality system documentation. Participating in and offering technical support to internal and external audits; following up response of corrective action from audit. Interacting with manufacturing team members to determine the root cause of quality issues and ensure that corrective and preventive action is implemented. * Automation: Collecting and researching data on customer experience with robotic platforms. Documenting architecture specifications, software design description, verification plans, test cases, operating procedures, and safety procedures. Utilizing appropriate tools to debug, test and maintain software and hardware systems of robotic tools; assisting in the verification and validation process. Participating in design and development of application software and algorithms for robotic platforms. What You Have - Skills and Experiences In this role, you will have the opportunity to contribute your unique skills and experiences. Below are some of the most critical skills. * Analytical skills, initiating ideas, troubleshooting, root cause analysis, problem-solving, and critical thinking capabilities * Organize and manage multiple projects simultaneously, ability to quickly gain and effectively apply new skills & knowledge * Success in collaborating with others of diverse cultures, interpersonal styles, and abilities * Strong written and verbal communication skills * Participate in and build on our inclusive, constructive, and productive work environment * Ensure all team members' contributions are recognized and valued Internship Program Qualifications: * Must be enrolled full-time in a 4-year university/college in one of the following degree programs: Engineering, Engineering Management/Technology, Industrial Distribution/Technology, Automation Engineering Technology, Mechatronics, Robotics, Mechanical Engineering, Electrical Engineering, or other relevant degrees at the time of application and throughout the program. * Must have 30 completed semester hours before the start of the internship. * If a transfer student must have 12 semester hours completed at a 4-year university. * Minimum 2.8/4.0 Cumulative Grade Point Average (no rounding) at current institution. * Must be able to relocate to indicated work location for the duration of the internship and complete daily work commute using reliable transportation. Top candidates can also have: * Project or Team Leadership experience * Previous internship, co-op, or research/relevant experience * Excellent interpersonal and communication skills Additional Information: * Please attach your resume and an unofficial copy of your transcript to your application. * Applicants will be considered for positions throughout the United States. * Sponsorship is NOT available for this position. * Relocation is available to those that qualify * This position requires working onsite five days a week. Besides exciting work, Corporate Interns will experience: * Comprehensive internship orientation * Tours of state-of-the-art manufacturing and research facilities * Product Demonstration * Mentorship Programs * Various social events * Networking with leadership * Business skill building * Career discussion with leaders and experts Final details: Please frequently check the email associated with your application, including the junk/spam folder, as this is the primary correspondence method. If you wish to know the status of your application - please use the candidate log-in on our career website as it will reflect any updates to your status. Qualified applicants of any age are encouraged to apply. For more information, visit caterpillar.com. To connect with us on social media, visit caterpillar.com/social-media. Visa Sponsorship is not available for this position. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as, H, L, TN, F, J, E, O. As a global company, Caterpillar offers many job opportunities outside of the U.S which can be found through our employment website at **************************** Summary Pay Range: $25.00 - $43.00 Intern Hour Rate: An intern's hourly rate is based on the major/degree being pursued and the number of completed academic hours achieved before the start of the internship. Intern Benefits: The total rewards package, beyond base salary, may include if eligible: * Accrued Paid Time Off (PTO) * Paid Holidays * Paid Volunteer Day * Housing Stipend * Relocation Assistance * Medical coverage * Voluntary benefits Relocation is available for this position. Visa Sponsorship is not available for this position. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as, H, L, TN, F, J, E, O. As a global company, Caterpillar offers many job opportunities outside of the U.S which can be found through our employment website at **************************** Posting Dates: December 2, 2025 - March 30, 2026 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

The Kinetic Group is a world leader in the design, manufacturing, and distribution of small caliber ammunition under the iconic brands B&P, CCI, Federal Premium, Fiocchi, HEVI-Shot, Remington and Speer. We have domestic ammunition manufacturing facilities in Minnesota, Idaho, Arkansas, and Missouri, and service law enforcement, government agencies and sporting enthusiasts throughout the world. Today, The Kinetic Group is a part of the Ammo+ division of The Czechoslovak Group (CSG), which holds a diverse portfolio of companies in the defense, security, automotive, aerospace and rail industries. At The Kinetic Group, our interns play a vital role in advancing our mission to deliver high-quality, reliable ammunition to customers worldwide, offering you a unique chance to make a real impact in an industry fueled by precision and passion. As the Manufacturing Engineer Intern, you will have the opportunity to support our engineering team on our product lines. This position reports to the Manager, Manufacturing Engineering and is based out of our Anoka, MN office. What you'll do: Create work instructions and/or operating procedures for new and existing equipment and products. Complete time studies and capacity analysis for bottleneck equipment. Document machine change over tasks and troubleshooting guides to improve machine uptime. Support the Engineering and Operations staff in process improvement activities. Generate reports and summaries of data and work performed. Perform process capability studies as needed. Perform root cause analysis on manufacturing issues and implement corrective actions. Create engineering change orders for print and document revision Experience you bring: Engineering student in an accredited technical college or university. Prefer Manufacturing Mechanical or Industrial Engineer Proficient in Microsoft Office applications Excellent written and oral communication skills Excellent interpersonal, problem solving, organizational, and time management skills Proficient at handling ambiguity and dealing with multiple priorities Continuous improvement and results oriented Strong interest in working for The Kinetic Group You might have: Hands on experience with Six Sigma tools and lean manufacturing concepts CAD experience (SolidWorks) Statistical problem-solving skills such as DOE using Minitab Small Caliber ammunition manufacturing experience Additional Information: Shift: Monday-Friday (8-9 hour) days Summer Internship: May-August Got questions? We've got answers! 👉 Explore our FAQ Page: ***************************************************** Work Environment: Employee work assignments may include tasks working with and/or exposure to potentially hazardous areas, including flammables and explosives. Safety training is provided to all employees to ensure compliance with company and federal regulations. Pay Range: Hourly Rate: $22.00 - $26.00 The actual annual salary offered to a candidate will be based on variables including experience, geographic location, education, and skills/achievements, and will be mutually agreed upon at the time of offer. We offer a highly competitive salary, comprehensive benefits including: medical and dental, vision, disability and life insurance, 401K, PTO, tuition reimbursement, gear discounts and the ability to add value to an exciting mission! Our Postings are not intended for distribution to or use in any jurisdiction, country or territory where such distribution or use would violate local law or would subject us to any regulations in another jurisdiction, country or territory. We reserve the right to limit our Postings in any jurisdiction, country or territory. Equal Opportunity Employer Minorities/Females/Protected Veteran/Disabled

At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe. The Manufacturing Engineering Intern will provide Manufacturing Engineering support to Operations through line support and continuous improvement, while working to improve the overall efficiency of the manufacturing operation while optimizing human work factors, quality control, material flow, etc. by identifying areas for improvement through use of statistics and root cause analysis tools. Key Program Info: * Dates: Summer 2026 (May-August) * Location: Plymouth, MN * Work Environment: Onsite * Hours: full-time for the duration of your internship What You'll do as an Engineering Intern * Help implement processes and procedures to improve efficiency and quality. * Organize and document testing and product development process. * Work as a collaborative team member in engineering projects. * Interface with cross-functional teams. * Communicate and present testing results and milestones (Microsoft Office Tools/Excel/PowerPoint/etc.). * Assist in efforts associated with Installation Qualifications, Operational Qualifications and Process Qualifications. * Assist in getting cycle time data and analysis and articulate process improvement recommendations, both written and verbally. * Perform literature and web research. * Assist in Lean tools and principles including set-up reduction, standard work, value stream mapping, A3 problem solving. * Collect and analyze data. The Experience, Skills and Abilities Needed Required: * Currently pursuing a bachelor's or master's degree in Engineering - Industrial, Electrical, Mechanical, or Manufacturing Engineering preferred. Sophomore year requirements must be completed by program start (May 2026) * Proficient in Microsoft Word, Excel, and PowerPoint Preferred: * Demonstrates understanding of Lean Manufacturing and Continuous Improvement. 5S, standard work, process flow and value stream mapping. Other: * Organizational, communication, problem solving, and troubleshooting skills. Pay range for this opportunity is $20-25/hr. Minimum pay rates offered will comply with county/city minimums, if higher than range listed. Pay rates are based on a number of factors, including but not limited to local labor market costs, years of relevant experience, education, professional certifications, foreign language fluency, etc. STERIS offers a comprehensive and competitive benefits portfolio. Click here for a complete list of benefits: STERIS Benefits Open until position is filled. STERIS is a leading global provider of products and services that support patient care with an emphasis on infection prevention. WE HELP OUR CUSTOMERS CREATE A HEALTHIER AND SAFER WORLD by providing innovative healthcare and life sciences products and services around the globe. For more information, visit *************** If you need assistance completing the application process, please call ****************. This contact information is for accommodation inquiries only and cannot be used to check application status. STERIS is an Equal Opportunity Employer. We are committed to equal employment opportunity to ensure that persons are recruited, hired, trained, transferred and promoted in all job groups regardless of race, color, religion, age, disability, national origin, citizenship status, military or veteran status, sex (including pregnancy, childbirth and related medical conditions), sexual orientation, gender identity, genetic information, and any other category protected by federal, state or local law. We are not only committed to this policy by our status as a federal government contractor, but also we are strongly bound by the principle of equal employment opportunity. The full affirmative action program, absent the data metrics required by § 60-741.44(k), shall be available to all employees and applicants for employment for inspection upon request. The program may be obtained at your location's HR Office during normal business hours.

Medical Cretex Medical is a family of companies that provides manufacturing and engineering services to medical device OEMs. We offer a complete range of end-to-end manufacturing capabilities, the latest technologies, and the talent to match any manufacturing or engineering challenge. Learn more at ********************** Responsibilities Manufacturing Engineer Intern Position Summary The Manufacturing Engineering intern will be responsible for providing technical support focusing on Manufacturing projects. The intern will assist the Engineering department with projects from scope definition through implementation. This Manufacturing Engineer Intern position will be located in Anoka, MN. This internship will also be an on-site position, working 40 hours/week. Manufacturing Engineer Intern Duties and Responsibilities Provide internal customer technical support Part manufacturability technical support Assist with the implementation of process and design improvements Support and comply with the company Quality System, ISO, and medical device requirements Read, understand, and follow work instructions and standard work Partner with other business segments: sales/marketing, customer service, engineering, quality, and finance Understand customer needs and the core business markets we serve Qualifications Manufacturing Engineer Intern Qualifications Enrollment in a four-year degree program for Manufacturing, Mechanical, or Industrial Engineering Ability to read blueprints Ability to use measuring devices Demonstrate excellent interpersonal and team building skills to create effective working coworkers Ability to follow through on commitments and holds team members accountable Strong problem-solving skills Microsoft Office proficiency (Outlook, Word, Excel, PowerPoint, Publisher) Clear and effective verbal and written communication skills Attention to detail and organizational skills Ability to work in a fast-paced team environment Ability to prioritize and multitask What to Expect from an Internship with Cretex Medical? Each summer, we are excited to offer interns countless opportunities to network, learn more about the Cretex family of businesses, and have fun! Here are some things you'll get to experience as an intern with Cretex Medical and its businesses: Work with the latest technologies Challenge yourself and grow your skills Find opportunities to move across our family of businesses Cretex offers internships in many different areas, including Engineering, Human Resources, Information Technology, Marketing, Accounting, Business, and Production Operations. We encourage you to explore the many internship opportunities Cretex Medical could offer you. Internships are available in a variety of locations within the Minneapolis/St. Paul (Minnesota) metro area, including Elk River, Brooklyn Park, Bloomington, Coon Rapids, Anoka, and Dassel. If you have a location preference, please specify that in the job application questions. Here are some of the things that interns have said about working at Cretex: “I enjoyed how integrated the interns were in the workflow. We were working on projects that made an impact for the company. I had opportunities to work with employees from all areas of the company as well as other interns.” “During my internship, I gained firsthand experience in project management, quality systems, and manufacturing best practices. I was able to grow my skills in design by focusing on creating more ergonomic processes for manufacturing. I enjoyed the learning experience and the relationships I developed.” Cretex Intern Benefits: Cretex offers a wide range of benefits for interns including: Eligible for Housing Stipend for Relocation Eligible for Health and Wellness Benefits Career Development Activities Opportunities to Interact with Leadership Company Events Facility Tours Summer Intern Event Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, disability, age, veteran status, marital status, family status, status with regard to public assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit ********************* Pay Range USD $25.00 - USD $27.00 /Hr. Company Benefits Benefits: All Employees: Our 401k retirement savings plan with a company match contribution; onsite health clinics, discretionary holiday bonus program (based on years of service), Cretex University, 24/7 employee assistance program with access to five confidential visits with a licensed counselor at no cost, wellness program with incentives, an employee death benefit, and employee sick and safe leave are available to all Cretex employees. 20+hours: Cretex's medical benefit package includes: comprehensive medical insurance with access to virtual providers; dental insurance (Little Partners Dental benefit covers services 100 percent for children 12 and younger when seen by a Health Partners in network provider); vision insurance; a pre-tax health savings account, healthcare and dependent care pre-tax reimbursement accounts; paid holidays, paid time off; and our discretionary profit sharing program are available to employees working 20+ hours/week. 30+ hours: Parental Leave, accident and critical illness benefits, optional employee, spouse, and child life; short and long term disability; company provided life insurance; and tuition assistance programs are available to employees working 30+ hours per week. (Some benefits are subject to eligibility criteria.)

We're looking for people who put their innovation to work to advance our success - and their own. Join an organization that ensures a more secure world through connecting and protecting our customers with inventive electrical solutions. Identify and implement corrective actions to minimize downtime for manufacturing-related issues. Evaluate and order essential tools and fixtures to promote safety and efficiency for production team members. Implement Lean Manufacturing initiatives and participate in continuous improvement activities. Assist with new product launches and process development. Recommend product improvements and maintain standard drawings and work instructions. Support manufacturing of custom/standard product bills, routings, and supplemental data. Provide documentation for estimating the cost of materials and labor of manufactured products. Understand product complexity and equipment requirements to select appropriate manufacturing lines/processes. Work with multi-functional team members on capital planning and acquisition projects. You have: We're looking for a proven candidate who can bring a flawless execution to our ambitious projects. The ideal candidate will possess the following: High School diploma or G.E.D. or equivalent experience; a 2-year or 4-year degree is preferred. Minimum of 2 years of experience in a manufacturing environment. Strong analytical thinking abilities. Initiative to be a self-starter and work independently with minimal supervision. Flexibility in swiftly evolving business situations and the capacity to excel in a dynamic work setting. Proficiency, or the capacity to acquire, computer software such as Microsoft Office, JD Edwards, and SolidWorks. Ability to detail processes in work instruction format. Experience in Lean Manufacturing and Continuous Improvement projects. WE HAVE: A dynamic global reach with diverse operations around the world that will stretch your abilities, provide plentiful career opportunities, and allow you to make an impact every day nVent is a leading global provider of electrical connection and protection solutions. We believe our inventive electrical solutions enable safer systems and ensure a more secure world. We design, manufacture, market, install and service high performance products and solutions that connect and protect some of the world's most sensitive equipment, buildings and critical processes. We offer a comprehensive range of systems protection and electrical connections solutions across industry-leading brands that are recognized globally for quality, reliability and innovation. Our principal office is in London and our management office in the United States is in Minneapolis. Our robust portfolio of leading electrical product brands dates back more than 100 years and includes nVent CADDY, ERICO, HOFFMAN, ILSCO, SCHROFF and TRACHTE. Learn more at ************** Commitment to strengthen communities where our employees live and work We encourage and support the philanthropic activities of our employees worldwide Through our nVent in Action matching program, we provide funds to nonprofit and educational organizations where our employees volunteer or donate money Core values that shape our culture and drive us to deliver the best for our employees and our customers. We're known for being: Innovative & adaptable Dedicated to absolute integrity Focused on the customer first Respectful and team oriented Optimistic and energizing Accountable for performance Benefits to support the lives of our employees Pay Transparency nVent's pay scale is based on the expected range of base pay for this job and the employee's work location. Employee pay within this range will be based on a combination of factors including knowledge, skills, abilities, experience, education, and performance. Where federal, state, or local minimum wage requirements exist, employee pay will comply. Compensation Range: $20.40 - $37.80 Per Hour Depending on the position offered, employee may be eligible for other forms of compensation, such as annual incentives. Benefit Overview At nVent, we value our people and their health and well-being. We provide a broad benefits package with meaningful programs for eligible full-time employees that includes: Medical, dental, and vision plans along with flexible spending accounts, short-term and long-term disability benefits, critical illness, accident insurance and life insurance. A 401(k) retirement plan and an employee stock purchase plan - both include a company match. Other supplemental benefits such as tuition reimbursement, caregiver, personal and parental leave, back-up care services, paid time off including volunteer time, a well-being program, and legal & identity theft protection. At nVent, we connect and protect our customers with inventive electrical solutions. People are our most valuable asset. Inclusion and diversity means that we celebrate and encourage each other's authenticity because we understand that uniqueness sparks growth.

We are the largest electrical distribution cooperative in Minnesota and is a progressive organization that provides electric service to customers in a 7-county area north of the Twin Cities. Our organization received the highest ranking in reliability and the ability to restore power of all electric utilities nationwide in the 2014 American Customer Satisfaction Index. We are currently seeking an experienced Engineer with excellent analytical skills to guide the Engineering department in developing and applying standards that result in the most cost effective, reliable distribution system. The individual in this position will develop and maintain construction standards and specifications for the distribution system that includes new technologies, materials, methods and products. Key areas of responsibilities include: • Create standards and identify new materials to design, construct, and maintain a quality system while continuously analyzing and striving to make improvements • Develop and maintain construction specifications • Research and prepare major material purchase specifications for equipment • Research and evaluate new products • Review equipment and material failures and implement necessary corrective measures • Provide technical guidance to distribution system design and construction departments • Develop, publish, and distribute construction specification books to ensure all system construction will meet strength and clearance requirements and to minimize construction costs, while meeting standards and codes Required Talents, Skills, Expertise, Education • BS degree in Electrical, Civil, Mechanical or Industrial Engineering • Five years' experience in electric distribution, transmission or substation engineering in a utility focused environment • Engineer-in-training with ability to obtain Professional Engineer license in Minnesota • Knowledge and ability to apply standards and codes • Excellent oral and written communication skills Preferred Talents, Skills, Expertise, Education • Knowledge and ability to apply National Electrical Safety Code • Power emphasis in Electrical Engineering • Professional Engineer license in Minnesota • Drafting software skills SKILLS AND CERTIFICATIONS Engineer-in-training with ability to obtain Professional Engineer license in Minnesota Excellent oral and written communication skills SCREENING QUESTIONS Please seriously evaluate where Ramsey, MN is located and the climate in this area. Based on your evaluation and if necessary, would you be willing to relocate to MN? Do you have a BS degree in Electrical, Civil, Mechanical or Industrial Engineering? Do you have five or more years experience in electric distribution, transmission or substation engineering in a utility focused environment? IDEAL CANDIDATE The ideal candidate has 5+ years' experience in electric distribution system applications. A Power emphasis in Electrical Engineering, Professional Engineer license in Minnesota, familiarity with National Electric Code and drafting software skills would be ideal. IDEAL CANDIDATE SHOULD HAVE WORKED FOR THE FOLLOWING COMPANY(IES): Xcel Energy, other electric co-operatives or municipalities, engineering consulting firms that specialize in power Additional Information All your information will be kept confidential according to EEO guidelines. Direct Staffing Inc

SMT Manufacturing Engineering Technician Bloomington, MN | Direct-Hire | $20-$30/hr + OT (Flexible) | 100% Onsite | 2nd shift We are seeking a hands-on, detail-oriented SMT Manufacturing Engineering Technician to support ongoing production, process improvement, and quality initiatives in a precision manufacturing environment. This role plays a key part in troubleshooting equipment, validating tooling setups, and supporting engineering with documentation, testing, and layout activities. It's an ideal opportunity for someone with strong technical aptitude and a collaborative mindset. POSITION RESPONSIBILITIES: Set up and troubleshoot SMT production equipment and fixtures, assisting with maintenance, test stands, and tooling validation to ensure uptime and consistency. Collaborate with manufacturing and engineering teams to execute equipment qualifications, process validations, and new tooling trials. Assist with drafting, revising, and releasing work instructions, quality documentation, and test procedures. Support fixture and equipment development by coordinating with vendors, ordering parts, and overseeing timely build and testing. Use precision measurement tools to conduct part layouts and dimensional verification, reporting results to engineering. Maintain tooling and gauge records, track equipment performance, and ensure calibration documentation is up to date. Contribute to root cause analysis and corrective action plans for process or product issues, participating in MRB and failure investigations. Support lean initiatives on the production floor by identifying improvement opportunities and collaborating on waste-reduction efforts. REQUIRED QUALIFICATIONS: Associate degree in Mechanical, Manufacturing, or related Engineering Technology field or equivalent experience. 3+ years of hands-on experience in a manufacturing environment. Proficiency with mechanical measurement tools (calipers, micrometers, height gauges, etc.). Experience supporting validation, process improvement, and test documentation. Ability to interpret engineering drawings and schematics. PREFERRED QUALIFICATIONS: Familiarity with 3D CAD systems such as SolidWorks or AutoCAD. Exposure to lean manufacturing tools or quality systems (ISO 9001, 8D, FMEA, etc.). Ability to work independently on test setups, equipment troubleshooting, and layout tasks. BENEFITS: Competitive salary with performance-based incentives PTO and paid holidays Medical, dental, and vision coverage 401(k) with company match Ongoing training and professional development opportunities Be the first to learn about future positions by joining our Newsletter and following us on LinkedIn! Konik is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as a qualified individual with a disability, or any other protected class status. Konik has been creating impactful relationships between technical talent and employers for more than 50 years. Konik has specialized in placing professional, qualified personnel in Minnesota and western Wisconsin businesses since its inception, and maintains a strong commitment to customer service.

Reports to: Production Manager

The Senior Casting Technology Manufacturing Engineer provides technical leadership for SX or equiax investment castings across the value stream. You will partner with suppliers and cross-functional teams to drive root cause problem solving, improve producibility, increase productivity, and deliver on business objectives. You will own supplier technical relationships, coach on internal processes/specs/methods, qualify new suppliers, and help develop and industrialize alternate casting technologies. **Job Description** **Roles and Responsibilities** + Provide process and product technical leadership for the Castings commodity, including SX or equiax investment castings. + Develop strong working relationships with casting supplier technical teams. + Partner with suppliers to identify and implement corrective actions to eliminate the cause and prevent recurrence. + Act as a change agent to advance world-class performance and standard work across the supply base. + Own supplier technical relationships; mentor suppliers on GE Aerospace processes, specifications, and methods; ensure compliance and capability. + Lead cross-functional problem solving, to identify true root cause and implement sustainable corrective and preventive actions. + Improve manufacturability through design-for-casting, specification clarity, and process capability improvements. + Clearly communicate progress, risks, challenges, and countermeasures to leadership and stakeholders. + Review and approve significant/special processes; ensure adherence to standards and qualification requirements. + Collaborate with Quality and Design Engineering to ensure new and changed processes meet established metrics; align with other commodities on strategy and objectives + Partner with suppliers and internal teams to interpret drawings/specifications, ensuring conformance and clarity. + Identify and onboard new suppliers; lead technical qualifications and readiness through Manufacturing and Quality Planning reviews and support supplier Castings Audits. + Ability to travel to supplier sites 30%-50% **Minimum Required Qualifications** + Bachelor's degree in Engineering (Materials/Metallurgy, Mechanical, Manufacturing, or related field) + Minimum of 5 years of materials engineering, castings, mechanical engineering or a related field **Desired Characteristics and Experience** + Additive manufacturing experience. + Metal Injection Molding (MIM) experience. + Proficiency with Siemens NX or comparable CAD. + Sand Castings Experience. + Titanium Experience. + Significant experience in investment castings (SX or equiax), with demonstrated yield, capability, and cost improvements + Hands-on expertise across investment casting special processes (wax, shell, melt/solidification control, heat treat, HIP, NDT) and specification compliance. + Strong problem solving and project management skills. + New Product Introduction experience. + Experience maturing technologies and processes. + Excellent communication and stakeholder management; ability to influence without authority + Humble learner: Respectful, receptive to feedback, agile, and continuously improving; seeks out diverse perspectives. + Transparent communicator: Shares critical information proactively; speaks with candor; engages constructively to resolve issues. + Focused and accountable: Fast learner with strong ownership; meets commitments and drives results against SQDC targets ( _Safety, Quality, Delivery and Cost in that order)_ . **Pay and Benefits:** + The salary range for this position is $ 116,000.00 - 155,000.00. The specific salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. + GE provides a comprehensive benefits package that provides access to plans which support the overall wellbeing of our employees and their dependents. These benefits include, but are not limited to, health care coverage (medical, dental, vision, pharmacy), a retirement plan that includes Company Retirement Savings and a 401K with Company matching, Life Insurance options, Disability coverage, paid time-off, EAP, and more. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Specific Projects: Support launch of new manufacturing processes and tooling. Other Potential Activities (Bandwidth Permitting) Process Documentation: Work Instructions, preventative maintenance records, etc. Tooling assembly / rebuilds Routing updates Time studies for costed routings and project cost justifications Migration of paper documentation to electronic platform (Work instructions, PFMEA) Other manufacturing engineering support tasks as directed Qualifications: Proficient computer skills, including Microsoft Excel, Word and Power Point Familiarity with CAD (preferably SolidWorks) - Entry level (2D prints and 3D modeling- GD & T knowledge a +) Excellent written and verbal communication skills Strong mechanical, pneumatic and/or electrical aptitude Familiarity with hand and shop tools and their use Previous molding experience preferred, not required Must be enrolled in an accredited university/college / technical program Majors: Mechanical/Manufacturing/Industrial Engineering or equivalent GPA of 3.0 or higher Pay Range: $19-$20 At PTI, base pay is one part of our total compensation package and is determined within a range. This provides the opportunity to progress as you grow and develop within a role. The salary offered will depend on your skills, education, qualifications, experience, and location. If you have any questions, feel free to reach out to ***********************. Benefits Available: Sick Pay

Job Description We are seeking a dedicated Manufacturing Engineering Technician to enhance our production processes. This role involves collaborating closely with Manufacturing Engineers and production teams to optimize manufacturing operations. Key responsibilities include troubleshooting equipment and process issues, maintaining equipment, and updating process documentation. The technician will also support engineers in project development by building or procuring test equipment and conducting tests, including process validations. Key Responsibilities: Develop and revise production documentation, such as travelers, routings, drawings, work and inspection instructions, and BOMs, ensuring the availability of accurate information for quality product assembly. Assist in improving manufacturing methods and procedures, including drafting change orders and deviations. Program production equipment effectively. Identify and resolve process, material, or equipment issues, offering solutions to minimize downtime. Design, assemble, procure, or modify tooling, fixtures, and equipment for efficient production methods. Schedule, perform, and document routine maintenance on manufacturing and testing equipment. Collaborate and communicate effectively with colleagues at various organizational levels. Contribute to team success by undertaking additional tasks as necessary. Qualifications and Skills: Associate Degree in Engineering Technology or a related field, or equivalent education and experience. Strong communication skills and the ability to work well both independently and within a team. Proficiency in computer software, including Microsoft Office Suite (Word, Excel, Outlook), SolidWorks or similar, and Altium or similar. Knowledge of electronics industry standards (IPC-A-610, J-STD-001, IPC-A-620) is preferred. Familiarity with lean methodology is advantageous. Hands-on problem-solving capabilities and a self-motivated, self-directed approach. Ability to pass a background check and drug screening. Physical Requirements: Ability to perform computer and desk work for extended periods. Capability to perform machine and production-related tasks, requiring good hand/finger dexterity and eyesight. Ability to lift and carry up to 25 pounds. #hc197148

Loeffler Construction is looking for a full-time, experienced Project Engineer! Best Places to Work 2023 & 2025 - Minneapolis/St. Paul Business Journal Are you curious, hard-working, and like to make a difference? Loeffler is seeking a highly detailed individual to join the construction team. The Project Engineer is responsible for planning, coordinating, scheduling, as well as supervising, and monitoring on-site construction engineering activities for a project. Essential Duties and Responsibilities The Project Engineer is responsible for timely and accurate performance in fundamental, routine construction-related tasks for both project management and field construction activities. Depending on the size and/or scope of the project, the Project Engineer will assist the Project team with responsibilities including, but not limited to: Supporting the oversight and management of multiple projects from preconstruction through the closeout/warranty period Prepare detailed schedules (including Pre-Con, Procurement, Construction, and Close-out), and monitor and update schedules weekly. Utilize look-ahead schedules and collaborate with the team Anticipating client needs, documenting, and tracking progress with regular communication. Managing all project document control within Procore Prepare Agendas and run progress meetings, owner/architect meetings, and subcontractor pre-installation meetings. Accurately document discussions and distribute meeting minutes within 48 hours Process submittals and RFI's, and work with the Site Superintendent to determine tasks requiring prioritization Education Requires a bachelor's degree in Construction, Engineering, Architecture, or a related field preferred Skills, Abilities and Qualifications · Minimum of three (3+) years' experience in construction or a similar role preferred · Excellent interpersonal communication skills, attention to detail, and organizational skills · Working knowledge of Procore is desirable · Advanced knowledge of Microsoft Office Suite · OSHA 30 Hour Certification preferred Physical Demands and work environment The physical requirements listed here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Benefits There is a generous benefit offering, including: Medical, Dental, Vision, STD/LTD, Life, PTO, 401k, just to name a few. To view a full description, visit: *****************************************

Ramsey,MN Exp 2-5 yrs Degree Bach Job Description We are the largest electrical distribution cooperative in Minnesota and is a progressive organization that provides electric service to customers in a 7-county area north of the Twin Cities. Our organization received the highest ranking in reliability and the ability to restore power of all electric utilities nationwide in the 2014 American Customer Satisfaction Index. We are currently seeking an experienced Engineer with excellent analytical skills to guide the Engineering department in developing and applying standards that result in the most cost effective, reliable distribution system. The individual in this position will develop and maintain construction standards and specifications for the distribution system that includes new technologies, materials, methods and products. Key areas of responsibilities include: • Create standards and identify new materials to design, construct, and maintain a quality system while continuously analyzing and striving to make improvements • Develop and maintain construction specifications • Research and prepare major material purchase specifications for equipment • Research and evaluate new products • Review equipment and material failures and implement necessary corrective measures • Provide technical guidance to distribution system design and construction departments • Develop, publish, and distribute construction specification books to ensure all system construction will meet strength and clearance requirements and to minimize construction costs, while meeting standards and codes Required Talents, Skills, Expertise, Education • BS degree in Electrical, Civil, Mechanical or Industrial Engineering • Five years' experience in electric distribution, transmission or substation engineering in a utility focused environment • Engineer-in-training with ability to obtain Professional Engineer license in Minnesota • Knowledge and ability to apply standards and codes • Excellent oral and written communication skills Preferred Talents, Skills, Expertise, Education • Knowledge and ability to apply National Electrical Safety Code • Power emphasis in Electrical Engineering • Professional Engineer license in Minnesota • Drafting software skills SKILLS AND CERTIFICATIONS Engineer-in-training with ability to obtain Professional Engineer license in Minnesota Excellent oral and written communication skills SCREENING QUESTIONS Please seriously evaluate where Ramsey, MN is located and the climate in this area. Based on your evaluation and if necessary, would you be willing to relocate to MN? Do you have a BS degree in Electrical, Civil, Mechanical or Industrial Engineering? Do you have five or more years experience in electric distribution, transmission or substation engineering in a utility focused environment? IDEAL CANDIDATE The ideal candidate has 5+ years' experience in electric distribution system applications. A Power emphasis in Electrical Engineering, Professional Engineer license in Minnesota, familiarity with National Electric Code and drafting software skills would be ideal. IDEAL CANDIDATE SHOULD HAVE WORKED FOR THE FOLLOWING COMPANY(IES): Xcel Energy, other electric co-operatives or municipalities, engineering consulting firms that specialize in power Additional Information All your information will be kept confidential according to EEO guidelines. Direct Staffing Inc