Manufacturing engineer jobs in Jupiter, FL

Mission The Manufacturing Engineer plays an important role in the growth and development of manufacturing of Century Arms. The individual will be responsible for working with our New Product Development (NPD) group in firearms assembly, precision machining, and regulated manufacturing as well as our Sustainment Engineering group for CNC Mills, Lathes, EDM, and other similar equipment to produce consistent precision components and assemblies. The position requires an individual who will be hands on and will use their technical ability, critical thinking skills, and leverage industry techniques to develop or modify fixtures to bring parts from raw material state (billet, castings, forgings, extrusions) and assemble to finished part. Responsibilities * Develop, document, and validate assembly processes for firearms (e.g., barrel installation, trigger groups, bolt carrier groups, slide frame/mating). * Create and maintain PFMEAS, control plans, work instructions, and process flow diagrams for gun assembly and sub-assembly. * Implement lean manufacturing techniques (5S, value stream mapping, SMED) to reduce cycle times and scrap in firearm production. * Apply proper machining strategies, toolpaths, cutting parameters, and tooling to optimize machining processes and achieve desired outcomes. * Utilize knowledge of CNC machining techniques, including milling, turning, drilling, and grinding, to generate efficient and reliable programs for complex geometry and tight tolerances. * Design tooling, fixtures, and work holding solutions for repeatable, high precision assembly, CNC machining operations, stability, and alignment. * Analyze and optimize machining processes to improve cycle times, reduce scrap rates, and increase throughput. * Conduct time studies and process simulations to identify opportunities for process improvement and efficiency gains. * Implement Lean manufacturing principles and best practices to cut waste, streamline workflows, and enhance productivity in operations and assemblies. * Collaborate with quality assurance personnel to address non-conformances, implement corrective actions, and drive continuous improvement in product quality. * Perform dimensional inspections using precision measurement tools, such as micrometers, calipers, and CMMs (Coordinate Measuring Machines), to verify part dimensions and geometric tolerances. * Provide training and technical support to CNC machinists and operators on program setup, operation, and troubleshooting. * Foster a culture of continuous learning and skill development within the machining team, promoting knowledge sharing and cross-training to enhance capabilities and versatility. * Adhere to all employment policies/safety policies/practices required by law/established by Company. * Wear all necessary Personal Protective Equipment as always directed by Company. * Immediately report any maintenance and/or safety issues to supervisor. * Maintain respect, courtesy, a positive attitude and professionalism towards all co-workers and the Company. * Actively participate and support the 5S process by maintaining a clean workstation and department. * Other duties assigned as required. Qualifications & Knowledge Required To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. These requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Bachelor's degree in Mechanical, Industrial, Manufacturing Engineering, or a related field; or equivalent combination of education and experience. * 3+ years of experience in CNC programming roles, with ability in CAM software (e.g., HSMWorks, Mastercam, Gibbs CAM, Edge CAM). * 3+ years of experience in precision assembly manufacturing (firearms, aerospace, or medical devices preferred). * Hands-on experience with firearm assembly (AR-15/AR-10, 1911, Glock-pattern, or bolt action platforms). * Strong understanding of CNC machining principles, including G-code programming, toolpath generation, and machining parameters optimization. * Operate a variety of CNC machine control types and to expect machine movement when proving out new programs. * Knowledge of machining processes and materials, including metal cutting, tooling choice, and workpiece fixturing. * Familiarity with CAD/CAM integration, CAD software (e.g., SolidWorks, Autodesk Inventor), and GD&T (Geometric Dimensioning and Tolerancing). * Excellent critical thinking skills and the ability to troubleshoot technical issues related to CNC programming, machining, and tooling. * Effective communication and people skills, with the ability to collaborate effectively with cross-functional teams and communicate technical concepts to non-technical stakeholders. * Knowledge of Lean Manufacturing principles is highly desirable. * General computer skills and familiarity with Microsoft Office Suite preferred. * General mechanical ability is preferred. * Knowledge of and experience with hand tools * Adhere to essential functions of position such as attendance and timeliness. * Ability to accept and follow directions.

Mission The Manufacturing Engineer plays an important role in the growth and development of manufacturing of Century Arms. The individual will be responsible for working with our New Product Development (NPD) group in firearms assembly, precision machining, and regulated manufacturing as well as our Sustainment Engineering group for CNC Mills, Lathes, EDM, and other similar equipment to produce consistent precision components and assemblies. The position requires an individual who will be hands on and will use their technical ability, critical thinking skills, and leverage industry techniques to develop or modify fixtures to bring parts from raw material state (billet, castings, forgings, extrusions) and assemble to finished part. Responsibilities Develop, document, and validate assembly processes for firearms (e.g., barrel installation, trigger groups, bolt carrier groups, slide frame/mating). Create and maintain PFMEAS, control plans, work instructions, and process flow diagrams for gun assembly and sub-assembly. Implement lean manufacturing techniques (5S, value stream mapping, SMED) to reduce cycle times and scrap in firearm production. Apply proper machining strategies, toolpaths, cutting parameters, and tooling to optimize machining processes and achieve desired outcomes. Utilize knowledge of CNC machining techniques, including milling, turning, drilling, and grinding, to generate efficient and reliable programs for complex geometry and tight tolerances. Design tooling, fixtures, and work holding solutions for repeatable, high precision assembly, CNC machining operations, stability, and alignment. Analyze and optimize machining processes to improve cycle times, reduce scrap rates, and increase throughput. Conduct time studies and process simulations to identify opportunities for process improvement and efficiency gains. Implement Lean manufacturing principles and best practices to cut waste, streamline workflows, and enhance productivity in operations and assemblies. Collaborate with quality assurance personnel to address non-conformances, implement corrective actions, and drive continuous improvement in product quality. Perform dimensional inspections using precision measurement tools, such as micrometers, calipers, and CMMs (Coordinate Measuring Machines), to verify part dimensions and geometric tolerances. Provide training and technical support to CNC machinists and operators on program setup, operation, and troubleshooting. Foster a culture of continuous learning and skill development within the machining team, promoting knowledge sharing and cross-training to enhance capabilities and versatility. Adhere to all employment policies/safety policies/practices required by law/established by Company. Wear all necessary Personal Protective Equipment as always directed by Company. Immediately report any maintenance and/or safety issues to supervisor. Maintain respect, courtesy, a positive attitude and professionalism towards all co-workers and the Company. Actively participate and support the 5S process by maintaining a clean workstation and department. Other duties assigned as required. Qualifications & Knowledge Required To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. These requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Bachelor's degree in Mechanical, Industrial, Manufacturing Engineering, or a related field; or equivalent combination of education and experience. 3+ years of experience in CNC programming roles, with ability in CAM software (e.g., HSMWorks, Mastercam, Gibbs CAM, Edge CAM). 3+ years of experience in precision assembly manufacturing (firearms, aerospace, or medical devices preferred). Hands-on experience with firearm assembly (AR-15/AR-10, 1911, Glock-pattern, or bolt action platforms). Strong understanding of CNC machining principles, including G-code programming, toolpath generation, and machining parameters optimization. Operate a variety of CNC machine control types and to expect machine movement when proving out new programs. Knowledge of machining processes and materials, including metal cutting, tooling choice, and workpiece fixturing. Familiarity with CAD/CAM integration, CAD software (e.g., SolidWorks, Autodesk Inventor), and GD&T (Geometric Dimensioning and Tolerancing). Excellent critical thinking skills and the ability to troubleshoot technical issues related to CNC programming, machining, and tooling. Effective communication and people skills, with the ability to collaborate effectively with cross-functional teams and communicate technical concepts to non-technical stakeholders. Knowledge of Lean Manufacturing principles is highly desirable. General computer skills and familiarity with Microsoft Office Suite preferred. General mechanical ability is preferred. Knowledge of and experience with hand tools Adhere to essential functions of position such as attendance and timeliness. Ability to accept and follow directions.

About Us: As a global manufacturer of complex aircraft engine components, Pursuit Aerospace is founded on a commitment to relentless, continuous, operational improvement and extraordinary customer service. We pride ourselves on competitive cost structure, exceptional on-time delivery, and industry-leading quality. The Pursuit family of companies has cultivated long-term relationships with our customers around the world through respect, teamwork, technology, and trust. We are driven to develop industry leading process innovations and manufacturing techniques on behalf of our customers. Our exceptional quality is driven by a deep investment in and the daily practice of continually improving our people, processes, and products. About the Opportunity: We are looking for a Manufacturing Engineer to join our team in Stuart, FL. In this role, the Manufacturing Engineer will play a key role in developing, implementing, and optimizing manufacturing processes to ensure the production of high-quality aerospace components. This position requires a strong understanding of precision machining, aerospace industry standards, and continuous improvement methodologies. Location: Stuart, FL - On-Site. Responsibilities: Design, implement, and improve manufacturing processes to meet production goals, quality standards, and cost targets. Create and optimize CNC programs for milling, turning and other machining operations. Develop tooling and fixture designs to enhance machining efficiency and precision. Provide hands-on support to machinist and operators for troubleshooting and resolving production issues. Collaborate with other MFG Engineers to ensure manufacturability and adherence to specifications. Conduct root cause analysis and implement corrective actions for quality or process-related issues. Identify opportunities for process improvement and lead initiatives to enhance productivity and reduce waste. Utilize lean manufacturing and Kaizen methodologies to drive efficiency and process control. Prepare and maintain detailed manufacturing work instructions, routings, and process documentation. Ensure compliance with aerospace industry standards, including AS9100 and NADCAP. Participate in audits and ensure adherence to safety, quality, and regulatory requirements. Manage manufacturing projects from concept to completion, ensuring timelines and budgets are met. Coordinate with cross-functional teams, including production, quality, and procurement, to achieve project goals. Evaluate and recommend new tooling, equipment, and technologies to improve machining capabilities. Required Qualifications: Bachelor's degree in manufacturing engineering 0-2 years of experience in a manufacturing or aerospace machining environment Must be authorized to work in the U.S. on a full-time basis without sponsorship now or in the future. The Company cannot offer employment to visa holders who require employer sponsorship in the future or cannot work now on a full-time basis. Must be able to perform work subject to ITAR/EAR regulations. Preferred Qualifications: Proficiency in CNC machining, programming, and set up. Knowledge of GD&T and aerospace standards. Strong problem solving and analytical skills. Proficiency in CAD/CAM software- preferably Siemens NX Familiarity with ERP/MRP systems Excellent communication skills and project management skills. Working Conditions: While performing the duties of this Job, the employee is regularly required to sit and use hands to finger, handle, or feel. The employee is frequently required to talk or hear. The employee is occasionally required to stand; walk; reach with hands and arms and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision and color vision. Acknowledgements: The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. Benefits: Pursuit Aerospace also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements, among other things. Equal Opportunity Employer: Pursuit Aerospace is an Equal Opportunity Employer. We adhere to all applicable federal, state, and local laws governing nondiscrimination in employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Dometic is a global market leader in the mobile living industry. Millions of people around the world use Dometic products in outdoor, residential, and professional applications. Our Marine organization is a trusted provider of innovative solutions for the worldwide boating and boat building industry, and we recently expanded our scope to lead the boating industry into an electrified future. Dometic has won numerous NMMA Innovation Awards over the years and we are always striving for new ways to make boating easier, safer, and more enjoyable. We are a journey of continuous growth - now looking for our next star - a passionate Manufacturing Engineering Manager. This position reports to the Operations Manager and will work in Pompano Beach, FL. About the position As a Manufacturing Engineering Manager in the Pompano Beach team, you will be involved in leading and managing the manufacturing engineering team to support manufacturing operations, drive continuous improvement, and ensure efficient production processes. This role oversees the development and implementation of manufacturing methods, process improvements, and equipment selection and upgrades to enhance productivity, quality, and safety. Your main responsibilities Lead and mentor a team of manufacturing engineers. Drive continuous improvement initiatives using Lean, Six Sigma, and other methodologies. Manage departmental KPI's and implement tools for improvement. Coordinate project activities, resource planning, estimate project times and costs. Oversee the design, installation, and optimization of manufacturing equipment and processes. Monitor status, maintain program commitments, and report out progress on programs. May be required to act as Project Manager for smaller programs. Encourage group discussions, collaboration, teamwork and continuous improvement. Conduct performance evaluations (PMP) and recommend individual development. Support new product introductions and ensure manufacturability. Direct Engineering team in creation of production documents (PFMEA's, Work Instructions, etc.) Facilitate workshops with cross-functional technical team to improve processes. Lead efforts to maximize plant layout and participate in future-state planning (MTP) Troubleshoot and resolve complex manufacturing issues. Work closely with Quality/Warranty dept. to drive down warranty and quality issues. What do we offer? You are offered an interesting role in a dynamic, fast paced and global environment with great opportunities to grow and take on new challenges. The growth at Dometic is continuous - which gives you great possibilities to evolve with the company. Medical/Dental/Vision Insurance Employee Assistance Program (EAP) Disability insurance (STD/LTD) 401 (k) with company match PTO Company defined holidays and two floating holidays for you to use as you choose Paid maternity/paternity leave Tuition assistance Membership reimbursement (wholesale club and gym) Employee discounts on our incredible products Opportunities to make an impact

ESSENTIAL DUTIES AND RESPONSIBILITIES: · Create and Maintain Travelers and Manufacturing Operation sheets · Work with CNC Programmers to create solid Manufacturing processes · Issue Job Releases in JobBoss · Manager projects from start to finish · Represent a Positive Organizational Image to the Customers · Comply with All ISO and BHI Standards · Design fixtures for large Turning machine, 5Axis Vertical and Horizontal milling centers QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills and/or ability required. · Working Knowledge of All Drafting Standards, Techniques and Interpretation · Working Knowledge of Manufacturing Techniques, Standards and Specifications · Knowledge of SolidWorks · Able to follow instruction of superiors · Knowledge of MRP/ERP EDUCATION and/or EXPERIENCE: · Minimum of 1-5 years' experience in Manufacturing Engineering LANGUAGE SKILLS: English skills are required. WORK ENVIRONMENT: An environment with exposure to non-toxic chemicals, chemical aroma and dust. Physical demand is light lifting. While in the shop there is a chance of exposure to flying debris and contact with oil. Eye protection is provided by the employer to prevent/reduce the chances of physical danger. EOE

Job Title Industrial Engineer We looking for a new Industrial Engineer to join the Industrial Engineering team in our Stuart, Florida aerospace manufacturing site. The Industrial Engineering department is responsible for performing advanced analysis on scheduled and forecasted demands, capacity analysis, reporting status of business operations, maintaining business KPIs, building recovery and operations plans to facilitate on-time delivery of products to the customers, maintenance of time standards, optimal build flows, and facility layouts. Job description Develop a site capacity plan, including headcounts, efficiency targets, and capacity assumptions Analyze and develop schedules and operating plans for production Create recovery plans to facilitate the on-time delivery of products to customers Perform analysis on product cycle, takt, and lead times to support rate readiness and recovery initiatives Create, maintain, track, and distribute reports for business KPIs Compile reports for shop floor mechanics, shop floor management, and executive management Create tools and methods to measure and track shop floor milestones Conduct audits and support 5S initiatives in support of production Establish, revise, and maintain time standards in SAP for work orders and work order operations Conduct time studies, utilization studies, and other direct observation-based studies to update and improve time standards Analyze overall process effectiveness and compile reports on potential improvements Utilize value stream mapping, process flow, and other Lean Manufacturing tools to identify bottlenecks and improve efficiency Assist with planning and optimization of equipment layouts, floor space, work cells, workflow, and safety precautions in an industrial manufacturing environment Support project management for capital equipment acquisition, prepare cost estimates, timelines, and budgets for proposed projects Perform cost analysis in support of business development and spare pricing Perform non-recurring engineering (NRE) activities for work transfer and business development proposals, including ROM impact estimates and unit hours to learning curve estimates Process engineering change packages for impact on budget and methods of manufacture Perform responsibilities and duties as assigned in alignment with SEED initiatives and IPT structure Other duties as assigned Qualifications Master's or Bachelor's degree in Industrial Engineering, Systems Engineering, or Supply Chain Engineering from an accredited university 5-7+ years of experience in Industrial Engineering Experience working in an Aerospace manufacturing environment is required. Preferably at a low-rate manufacturing site. Basic proficiency with 2D/3D CAD Software Advanced proficiency with data and process analytics (PowerBI is a plus) Basic proficiency with generic programming languages (VBA, SQL, Python, C) Basic proficiency with database systems (SQL) Excellent communication and presentation skills Excellent organizational, planning, and time management skills Ability to train additional personnel in job duties Stuart Florida Site Requirements: Pursuant to International Traffic Arms Regulations (“ITAR”) and the Export Administration Regulations (“EAR”), applicants for SELECT positions will be required to provide proof of U.S. Citizenship, U.S. Permanent Residence, or U.S. Immigration Status in order to meet the minimum qualifications for those select positions. All inquiries related to citizenship are asked solely to comply with ITAR and EAR export licensing requirements. Who we are: Daher is a global industrial group specializing in aerospace manufacturing and logistics. With the stability provided by its family ownership, Daher has been committed to innovation since its creation in 1863. Daher Aerospace in Stuart Florida is a manufacturer of metallic and composite Aerostructure. The Stuart site is a key U.S. facility focused on assembling these complex aerostructures for Boeing and Gulfstream aircraft. With over 500 employees and 440,000 sq. ft. of production space, the site supports major programs like the 767, 777, and KC-46. Since its acquisition in 2022, Daher has invested in workforce development and infrastructure, positioning Stuart for future growth and final assembly operations. Join Daher to... Integrate a family group with a long-term vision Make a difference in a developing company Develop new skills thanks to the diversity of your missions Take part in a human and industrial adventure full of challenges Innovate and think outside the box by integrating a stimulating environment Profile and other information related to the position The compensation range is $90,000 to $100,000 in base salary plus an annual target bonus. Any prospective offer will take into account the overall experience the successful candidate brings to the role. Offers to selected candidates will be made on a fair and equitable basis, taking into account specific job-related skills and experience. At Daher, your total rewards package is more than just your base salary as we offer a full benefit package including Medical, Dental, Vision, 401(k), Life insurance, Short- and Long-Term Disability, Paid Time Off, Paid Holidays and more. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle or feel. Must be able to communicate verbally and have the ability to hear. The employee frequently is required to stand, walk, reach with hands and arms, and stoop or crouch. The employee is occasionally required to sit. The employee must regularly lift and/or move up to thirty (30) pounds and occasionally lift and/or move up to fifty (50) pounds. Have full range of motion required to perform the job functions. Maintain steady hand-eye coordination. Reach in all directions and in potentially awkward positions. All applicants are considered for all positions without regard to race, religion, color, sex, gender, sexual orientation, pregnancy, age, national origin, ancestry, physical/mental disability, medical condition, military/veteran status, genetic information, marital status, ethnicity, alienage, or any other protected classification, in accordance with applicable federal, state, and local laws. By completing an application with Daher, you are seeking to join a team of hardworking professionals dedicated to consistently delivering outstanding service to our customers and contributing to the financial success of the organization, its clients, and its employees. Equal access to programs, services, and employment is available to all qualified persons. Those applicants requiring accommodation to complete the application and/or interview process should contact an HR representative. Daher complies with the Americans with Disabilities Act (ADA), as amended by the ADA Amendments Act, and all applicable state or local law. Working hours Full time Salary 70000 Region Florida Location Stuart Experience Languages English Creative and entrepreneur, develop your career at the heart of the biggest industrial challenges with Daher!

We are seeking to recruit a Principal Optical Engineer for our location in Jupiter, Florida.

Are you eager to be an integral part of a team dedicated to producing high quality, cutting edge, innovative products and analytical instruments? Do you thrive on driving quality initiatives, improving production and assembly processes, and driving root cause analysis to fine tune quality and production? Is the concept of actively participating in the success of new product development and R&D innovation for high tech devices exciting to you? If you answered yes, yes, yes, then we'd love to discuss our Product Engineer role with you!

Value Driven Solutions is recruiting a Contract NLP / Document Intelligence Engineer to revolutionize how PE portcos extract actionable intelligence from unstructured data troves, including contracts, confidential information memorandums (CIMs), quality-of-earnings (QofE) reports, and customer correspondence. With up to 75% travel to secure data rooms and ops hubs, you'll spearhead assessments to uncover hidden risks/opportunities-such as clause ambiguities in supplier agreements or sentiment trends in feedback-and deploy layout-aware models that automate extraction, summarization, and risk scoring, slashing review times by 60% and enabling $25M+ in risk-mitigated value. You'll architect multimodal NLP pipelines using spa Cy/Transformers for entity recognition, relation extraction, and abstractive summarization, handling PDFs via PyMuPDF or LayoutLM for spatial awareness. Integration with enterprise search (Elasticsearch) and visualization tools will enable interactive querying, while ensuring HIPAA/SOX compliance through anonymization and audit trails. Partnering with legal/FP&A teams, you'll validate via precision/recall benchmarks and user trials, reporting to deal committees on quantified upsides like faster LOI closures. Ideal for NLP specialists with domain chops in finance/legal, who've industrialized document AI in high-stakes environments. VDS's cross-portco lens will let you refine models on diverse datasets, contributing to our due-diligence accelerator suite. Key Responsibilities: Lead document AI audits and 18-month roadmaps, prioritizing high-ROI automations (e.g., auto-flagging indemnity risks). Develop NER/summarization models with fine-tuning on portco-specific corpora, incorporating active learning. Build scalable ingestion pipelines for batch/real-time processing, with API endpoints for integration. Perform impact analyses, using NLP metrics to forecast savings (e.g., hours-to-dollars conversion). Upskill teams through tailored demos and contribute to VDS's open-source NLP toolkit. Required Qualifications: Advanced degree in NLP/CS; 4+ years building production document AI with >20% efficiency lifts. Proficiency in Hugging Face, BERT variants, and tools like DocTR for OCR/layout. Experience in finance/legal data, with focus on explainable NLP (attention viz). Python/SQL expertise, plus DevOps for model serving (FastAPI, Ray). Collaborative communicator for aligning tech with business/legal needs. Preferred Experience: Work with CIM/QofE parsing in M&A contexts. Multimodal fusion (text+table extraction) in regulated industries. Consulting on GxP-compliant document systems. To apply: Send CV + short note on the specific impact you've driven with NLP in private-equity or industrial settings to [email protected]. Include role title in subject line and your availability. Leadership Solutions - Value Driven Solutions Accelerating Agentic AI adoption in private equity portfolios

**Country:** United States of America ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance:** None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? **What You Will Do** The West Palm Beach Development Operations organization of Pratt & Whitney is looking for an Assembly Process Engineer responsible for creating and approving Assembly Instructions, improving assembly processes per lessons learned, troubleshooting engine assembly issues and mentoring other Process Engineers. The Process Engineer must demonstrate strong leadership, communication, and team skills as well as an ability to multi-task and adapt to changing business requirements. The Process Engineer develops, implements, and drives new technologies and lean manufacturing techniques into the assembly processes. The Process Engineer develops the skills necessary to independently support cross-disciplinary and cross-functional assembly teams. Support and training opportunities are always available for the pro-active employee in a culture that stimulates continuous learning. + Create and approve Assembly Process Instructions to meet validation / certification requirements for commercial and military Development Engines. + Support the Assembly Floor by driving the implementation of Assembly Instructions and troubleshooting any issues that may be stopping the Engine from being built + Drive the development and implementation of new and robust processes needed to ensure production readiness. + Consistently work to improve technical proficiency while mentoring peers to improve their own proficiency. + Review Bill of Materials (BOM) to identify needed changes to engineering definition and/or work instructions. + Participate in continuous improvement activities (QCPC, PITS, DIVEs, MES, etc.) intended to improve / simplify the assembly processes. + Travel up to 10%. **Qualifications You Must Have** + Bachelor Degree in Engineering + 5 years of experience, or an Advanced Degree with 3 years of experience **Qualifications We Prefer** + Experience Reviewing & Approving Assembly Work Instructions + Experience Reviewing & Approving Engineering Product Definition + Proficient in Teamcenter, NX, Solumina & SAP + Current security clearance **What We Offer:** + Employee Scholar Program **Learn More & Apply Now!** + Development Operations provides services to support future products for global commercial airlines, industrial partners and military customers. Services include Assembly, Instrumentation and Test of engines and rigs and the associated facilities, hardware, data systems, software and technology to support this. Development Operations delivers our services in a safe, efficient and sustainable environment. **What Is My Role Type:** In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: + **Onsite:** Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. _Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility._ _This requisition is eligible for an employee referral award. ALL eligibility requirements must be met to receive the referral award._ **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** The salary range for this role is 82,000 USD - 164,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What You Will Do The West Palm Beach Development Operations organization of Pratt & Whitney is looking for an Assembly Process Engineer responsible for creating and approving Assembly Instructions, improving assembly processes per lessons learned, troubleshooting engine assembly issues and mentoring other Process Engineers. The Process Engineer must demonstrate strong leadership, communication, and team skills as well as an ability to multi-task and adapt to changing business requirements. The Process Engineer develops, implements, and drives new technologies and lean manufacturing techniques into the assembly processes. The Process Engineer develops the skills necessary to independently support cross-disciplinary and cross-functional assembly teams. Support and training opportunities are always available for the pro-active employee in a culture that stimulates continuous learning. Create and approve Assembly Process Instructions to meet validation / certification requirements for commercial and military Development Engines. Support the Assembly Floor by driving the implementation of Assembly Instructions and troubleshooting any issues that may be stopping the Engine from being built Drive the development and implementation of new and robust processes needed to ensure production readiness. Consistently work to improve technical proficiency while mentoring peers to improve their own proficiency. Review Bill of Materials (BOM) to identify needed changes to engineering definition and/or work instructions. Participate in continuous improvement activities (QCPC, PITS, DIVEs, MES, etc.) intended to improve / simplify the assembly processes. Travel up to 10%. Qualifications You Must Have Bachelor Degree in Engineering 5 years of experience, or an Advanced Degree with 3 years of experience Qualifications We Prefer Experience Reviewing & Approving Assembly Work Instructions Experience Reviewing & Approving Engineering Product Definition Proficient in Teamcenter, NX, Solumina & SAP Current security clearance What We Offer: Employee Scholar Program Learn More & Apply Now! Development Operations provides services to support future products for global commercial airlines, industrial partners and military customers. Services include Assembly, Instrumentation and Test of engines and rigs and the associated facilities, hardware, data systems, software and technology to support this. Development Operations delivers our services in a safe, efficient and sustainable environment. What Is My Role Type: In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility. This requisition is eligible for an employee referral award. ALL eligibility requirements must be met to receive the referral award. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 82,000 USD - 164,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

About RYAM RYAM is a global leader of cellulose-based technologies, including high purity cellulose specialties, a natural polymer commonly found in filters, food, pharmaceuticals and other industrial applications. The Company also manufactures products for paper and packaging markets. With manufacturing operations in the U.S., Canada and France, RYAM employs approximately 2,500 people and generates approximately $1.4 billion of revenues. More information is available at ********************** RYAM's intellectual property and manufacturing processes have been developed over 90 years, resulting in unique properties and very high quality and consistency. RYAM is consistently ranked among the nation's top 50 exporters and delivers products to 79 ports around the world, serving customers in 20 countries across five continents. At RYAM, we're shaping the future of talent. RYAM has a specific purpose… to be the world's leading manufacturer of renewable products, including paper, packaging, and high purity cellulose. We want smart, innovative people who can find new ways to solve challenging problems. We need talented professionals across multiple disciplines who want to contribute to the company's mission and advance its vision, while also shaping its future. How you'll shape the future of the Engineering area: * Prepare in-depth feasibility studies, project appropriation requests, economic analysis and cost estimates for additions and modifications. * Work with consultant engineering firms to develop larger and more complex projects while managing costs. * Prepare or supervise preparation of drawings for assigned capital and other projects. * Participate with project teams in selecting equipment and material for new plant facilities and modifications. * Prepare and analyze equipment and contract specifications, bid packages and make recommendations. * Assist other Project Engineers in own field of experience and engineering. * Supervise contractors' field work. * Advise maintenance supervision on field work of assigned projects. * Coordinate with purchasing, traffic and receiving for delivery of new equipment and materials. Successful completion of all phases of assigned projects within authorized costs. * Investigate various types of equipment problems involving selection of material, improvement of equipment, and repair versus replacement analyses. * Inspect plant facilities, such as boilers, tanks, piping, and process equipment during shutdowns. * Inspect equipment deterioration and failures and recommend actions required to reduce or eliminate failures and ensure safe condition of potentially hazardous equipment. * Ensure that all phases of project work are properly documented, i.e., project costs, equipment manuals and drawings, material certifications, etc. * Procure spare parts and coordinate training for mechanics and operators as needed for new equipment and systems. * Ensure projects incorporate ergonomic consideration and are designed for safe operation. Additionally, responsible for contractor safety on project work. * May have responsibility for supervision of drawings and drafting. * May perform other duties as assigned depending upon the needs of the business. You'll be someone who can bring: * Bachelor of Science Degree in Engineering - Mechanical or Chemical preferred. * Three to five years engineering experience with preference in pulp/paper industry. * Experience managing engineering related projects is mandatory. * Specialized knowledge of process design, plaint maintenance practices, and project management. * Must be able to take a project from inception to completion with minimal supervision. * Capable of providing technical assistance and direction to interdisciplinary engineering personnel. Why you'll love working for RYAM: * Competitive pay * Medical, Dental, Vision * Short term / Long term disability * Paid Parental Leave * Bonus / Merit * Life insurance (Company paid & Voluntary) * Company paid Employee Assistance Program (EAP) * Tuition reimbursement * Wellness reimbursement * Retirement plan EOE/Vet/Disability

+ Led substation engineering projects from early-stage development through construction and commissioning, ensuring full compliance with interconnection, technical, and regulatory requirements. + Coordinated multidisciplinary engineering, external EOR teams, procurement, permitting, and utility/ISO stakeholders to deliver safe, cost-effective, and on-schedule substation designs and installations. **Responsibilities:** + All assigned substation projects from conception (Early Stage) through construction and commissioning (Execution). + In the conceptual phase, you will work with the Early-Stage Project Manager to support the engineering requirements and scope with the Development Group. + Training, due diligence, and technical oversight of external engineers of record (EOR) for all assigned substation projects to ensure compliance with required generation interconnection agreements, scope of work documents, project specifications, site specific design requirements, IEEE, NESC, ASCE and all other applicable industry codes and standards. + Securing engineering consulting resources from a list of approved suppliers by developing a scope of work, securing bids, evaluating, and awarding work through NEER's Integrated Supply Chain (ISC) Group. + Coordinate with other project stakeholders to develop and secure a substation site, support any engineering updates, data and permits necessary to design and build the substation. + Competitively source, select and contracting geotechnical, survey, engineering, and construction services, and supporting the E&C Cost Estimating Team with scope assumptions. + Coordination with other groups to ensure that the assigned E&C substation projects are successful. Generally responsible for representing E&C's internal and external interests on assigned projects, including presentations/briefing on current progress, issues, and risk mitigation in meetings with various levels of management. + Support Transmission Services during review of interconnection documentation including system impact studies, facility studies, reactive and harmonic studies and Interconnection agreements and ensures that Transmission Owner requirements and E&C engineering design are consistent and in compliance with all ISO requirements and incorporated into the project design. + Must be able to work with and communicate often to the respective transmission owners/operators/ISOs to ensure project deliverables will meet specific off-taker requirements, are timely and accurate. + Manage all project long lead major material orders to minimize risk of delays or exceeding the project budget. Assists ISC with all substation project SOW creation, review, approval, and preparation of shopping carts for engineering services and materials in a timely manner. + Support E&C Estimating with template update via project feedback, technical support, and scope modifications. + Works collaboratively with project engineering resources in various disciplines to determine project priorities, work plans and lines of demarcation. + Ensures projects are efficiently, cost effectively and safely implemented in accordance with department process, procedures, industry standards and policies. + Support assigned project commissioning activities to meet corporate objectives. + Support Legal in any regulatory filings, depositions and/or hearings. + Collaborate with component OEMs to enhance/adapt their designs to better integrate with NEER's philosophies. **Experience:** + Experience with substation projects from conception (Early Stage) to (Execution). **Skills:** + Clear communication, root-cause analysis, and documentation skills. **Education:** + Bachelor's degree **About US Tech Solutions:** US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit *********************** (********************************** . US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Process Validation/Manufacturing Eng needs 1-3 years experience in a cGMP-regulated manufacturing environment or an equivalent combination of training and experience is required. Process Validation/Manufacturing Eng requires: Bachelor's degree in engineering or a related field of specialization. Industrial engineering is preferred, but not required. Process Validation Current Good Manufacturing Practices (cGMP), Food and Drug Administration (FDA), Drug Enforcement Agency (DEA), and other regulatory requirements. Speak and write fluent English with proficiency in technical writing for complex reports and regulatory documents Process Validation/Manufacturing Eng duties: Interpret specifications, standard operating procedures, and standard testing procedures Works as a member of a team to achieve all outcomes Recommends and monitors improvements in manufacturing and control systems including corrective and preventative actions (CAPA) Performs assessments/approvals of change controls related to production activities

Ames Construction has built America for more than 60 years, and the exceptional people who make up our team are a vital factor in our success. We are a full-service, heavy civil and industrial general contractor that brings innovative solutions to many market segments, from highway and bridge construction to mining and rail. Ames is an employee-owned company that retains its entrepreneurial spirit while offering the experience and stability of a proven construction industry leader. Equipped with our core values of People, Team, Our Bond, Persistence, and Vision, we make communities across the U.S. safer, keep supply chains moving, and lay the groundwork for a sustainable future. By joining Ames, you will be working with talented colleagues at an award-winning, nationally recognized top 65 general contractor. We are seeking a motivated Project Engineer to join our team in the heavy civil construction industry. This role is ideal for individuals passionate about infrastructure development and eager to gain hands-on experience in managing large-scale projects such as highways, bridges, utilities, and site development. Key Responsibilities * Assist Project Managers and Superintendents with daily project operations. * Review and interpret project plans, specifications, and contract documents. * Track project progress, prepare reports, and maintain accurate documentation. * Coordinate with subcontractors, suppliers, and internal teams to ensure timely delivery of materials and services. * Support quality control and safety compliance on job sites. * Assist in cost tracking, budgeting, and schedule updates. * Participate in problem-solving and provide technical support during construction activities. Qualifications * Education: Bachelor's degree in Civil Engineering, Construction Management, or related field. * Experience: Internship or co-op experience in construction preferred but not required. * Strong understanding of construction principles and project management fundamentals. * Proficiency in Microsoft Office Suite; familiarity with scheduling software (e.g., Primavera P6) is a plus. * Excellent communication, organizational, and analytical skills. * Ability to work in a fast-paced environment and adapt to changing priorities. * Must have a valid Driver's License. Ames Construction is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. This position requires ensuring compliance with CMMC, FAR, and Accounting Standards in all Federal efforts.

Mission The Manufacturing Engineer plays an important role in the growth and development of manufacturing of Century Arms. The individual will be responsible for working with our New Product Development (NPD) group in firearms assembly, precision machining, and regulated manufacturing as well as our Sustainment Engineering group for CNC Mills, Lathes, EDM, and other similar equipment to produce consistent precision components and assemblies. The position requires an individual who will be hands on and will use their technical ability, critical thinking skills, and leverage industry techniques to develop or modify fixtures to bring parts from raw material state (billet, castings, forgings, extrusions) and assemble to finished part. Responsibilities Develop, document, and validate assembly processes for firearms (e.g., barrel installation, trigger groups, bolt carrier groups, slide frame/mating). Create and maintain PFMEAS, control plans, work instructions, and process flow diagrams for gun assembly and sub-assembly. Implement lean manufacturing techniques (5S, value stream mapping, SMED) to reduce cycle times and scrap in firearm production. Apply proper machining strategies, toolpaths, cutting parameters, and tooling to optimize machining processes and achieve desired outcomes. Utilize knowledge of CNC machining techniques, including milling, turning, drilling, and grinding, to generate efficient and reliable programs for complex geometry and tight tolerances. Design tooling, fixtures, and work holding solutions for repeatable, high precision assembly, CNC machining operations, stability, and alignment. Analyze and optimize machining processes to improve cycle times, reduce scrap rates, and increase throughput. Conduct time studies and process simulations to identify opportunities for process improvement and efficiency gains. Implement Lean manufacturing principles and best practices to cut waste, streamline workflows, and enhance productivity in operations and assemblies. Collaborate with quality assurance personnel to address non-conformances, implement corrective actions, and drive continuous improvement in product quality. Perform dimensional inspections using precision measurement tools, such as micrometers, calipers, and CMMs (Coordinate Measuring Machines), to verify part dimensions and geometric tolerances. Provide training and technical support to CNC machinists and operators on program setup, operation, and troubleshooting. Foster a culture of continuous learning and skill development within the machining team, promoting knowledge sharing and cross-training to enhance capabilities and versatility. Adhere to all employment policies/safety policies/practices required by law/established by Company. Wear all necessary Personal Protective Equipment as always directed by Company. Immediately report any maintenance and/or safety issues to supervisor. Maintain respect, courtesy, a positive attitude and professionalism towards all co-workers and the Company. Actively participate and support the 5S process by maintaining a clean workstation and department. Other duties assigned as required. Qualifications & Knowledge Required To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. These requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Bachelor's degree in Mechanical, Industrial, Manufacturing Engineering, or a related field; or equivalent combination of education and experience. 3+ years of experience in CNC programming roles, with ability in CAM software (e.g., HSMWorks, Mastercam, Gibbs CAM, Edge CAM). 3+ years of experience in precision assembly manufacturing (firearms, aerospace, or medical devices preferred). Hands-on experience with firearm assembly (AR-15/AR-10, 1911, Glock-pattern, or bolt action platforms). Strong understanding of CNC machining principles, including G-code programming, toolpath generation, and machining parameters optimization. Operate a variety of CNC machine control types and to expect machine movement when proving out new programs. Knowledge of machining processes and materials, including metal cutting, tooling choice, and workpiece fixturing. Familiarity with CAD/CAM integration, CAD software (e.g., SolidWorks, Autodesk Inventor), and GD&T (Geometric Dimensioning and Tolerancing). Excellent critical thinking skills and the ability to troubleshoot technical issues related to CNC programming, machining, and tooling. Effective communication and people skills, with the ability to collaborate effectively with cross-functional teams and communicate technical concepts to non-technical stakeholders. Knowledge of Lean Manufacturing principles is highly desirable. General computer skills and familiarity with Microsoft Office Suite preferred. General mechanical ability is preferred. Knowledge of and experience with hand tools Adhere to essential functions of position such as attendance and timeliness. Ability to accept and follow directions.

Mission The Manufacturing Engineer plays an important role in the growth and development of manufacturing of Century Arms. The individual will be responsible for working with our New Product Development (NPD) group in firearms assembly, precision machining, and regulated manufacturing as well as our Sustainment Engineering group for CNC Mills, Lathes, EDM, and other similar equipment to produce consistent precision components and assemblies. The position requires an individual who will be hands on and will use their technical ability, critical thinking skills, and leverage industry techniques to develop or modify fixtures to bring parts from raw material state (billet, castings, forgings, extrusions) and assemble to finished part. Responsibilities Develop, document, and validate assembly processes for firearms (e.g., barrel installation, trigger groups, bolt carrier groups, slide frame/mating). Create and maintain PFMEAS, control plans, work instructions, and process flow diagrams for gun assembly and sub-assembly. Implement lean manufacturing techniques (5S, value stream mapping, SMED) to reduce cycle times and scrap in firearm production. Apply proper machining strategies, toolpaths, cutting parameters, and tooling to optimize machining processes and achieve desired outcomes. Utilize knowledge of CNC machining techniques, including milling, turning, drilling, and grinding, to generate efficient and reliable programs for complex geometry and tight tolerances. Design tooling, fixtures, and work holding solutions for repeatable, high precision assembly, CNC machining operations, stability, and alignment. Analyze and optimize machining processes to improve cycle times, reduce scrap rates, and increase throughput. Conduct time studies and process simulations to identify opportunities for process improvement and efficiency gains. Implement Lean manufacturing principles and best practices to cut waste, streamline workflows, and enhance productivity in operations and assemblies. Collaborate with quality assurance personnel to address non-conformances, implement corrective actions, and drive continuous improvement in product quality. Perform dimensional inspections using precision measurement tools, such as micrometers, calipers, and CMMs (Coordinate Measuring Machines), to verify part dimensions and geometric tolerances. Provide training and technical support to CNC machinists and operators on program setup, operation, and troubleshooting. Foster a culture of continuous learning and skill development within the machining team, promoting knowledge sharing and cross-training to enhance capabilities and versatility. Adhere to all employment policies/safety policies/practices required by law/established by Company. Wear all necessary Personal Protective Equipment as always directed by Company. Immediately report any maintenance and/or safety issues to supervisor. Maintain respect, courtesy, a positive attitude and professionalism towards all co-workers and the Company. Actively participate and support the 5S process by maintaining a clean workstation and department. Other duties assigned as required. Qualifications & Knowledge Required To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. These requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Bachelor's degree in Mechanical, Industrial, Manufacturing Engineering, or a related field; or equivalent combination of education and experience. 3+ years of experience in CNC programming roles, with ability in CAM software (e.g., HSMWorks, Mastercam, Gibbs CAM, Edge CAM). 3+ years of experience in precision assembly manufacturing (firearms, aerospace, or medical devices preferred). Hands-on experience with firearm assembly (AR-15/AR-10, 1911, Glock-pattern, or bolt action platforms). Strong understanding of CNC machining principles, including G-code programming, toolpath generation, and machining parameters optimization. Operate a variety of CNC machine control types and to expect machine movement when proving out new programs. Knowledge of machining processes and materials, including metal cutting, tooling choice, and workpiece fixturing. Familiarity with CAD/CAM integration, CAD software (e.g., SolidWorks, Autodesk Inventor), and GD&T (Geometric Dimensioning and Tolerancing). Excellent critical thinking skills and the ability to troubleshoot technical issues related to CNC programming, machining, and tooling. Effective communication and people skills, with the ability to collaborate effectively with cross-functional teams and communicate technical concepts to non-technical stakeholders. Knowledge of Lean Manufacturing principles is highly desirable. General computer skills and familiarity with Microsoft Office Suite preferred. General mechanical ability is preferred. Knowledge of and experience with hand tools Adhere to essential functions of position such as attendance and timeliness. Ability to accept and follow directions.

About Us: As a global manufacturer of complex aircraft engine components, Pursuit Aerospace is founded on a commitment to relentless, continuous, operational improvement and extraordinary customer service. We pride ourselves on competitive cost structure, exceptional on-time delivery, and industry-leading quality. The Pursuit family of companies has cultivated long-term relationships with our customers around the world through respect, teamwork, technology, and trust. We are driven to develop industry leading process innovations and manufacturing techniques on behalf of our customers. Our exceptional quality is driven by a deep investment in and the daily practice of continually improving our people, processes, and products. About the Opportunity: We are looking for a Manufacturing Engineer to join our team in Stuart, FL. In this role, the Manufacturing Engineer will play a key role in developing, implementing, and optimizing manufacturing processes to ensure the production of high-quality aerospace components. This position requires a strong understanding of precision machining, aerospace industry standards, and continuous improvement methodologies. Location: Stuart, FL Responsibilities: Design, implement, and improve manufacturing processes to meet production goals, quality standards, and cost targets. Create and optimize CNC programs for milling, turning and other machining operations. Develop tooling and fixture designs to enhance machining efficiency and precision. Provide hands-on support to machinist and operators for troubleshooting and resolving production issues. Collaborate with other MFG Engineers to ensure manufacturability and adherence to specifications. Conduct root cause analysis and implement corrective actions for quality or process-related issues. Identify opportunities for process improvement and lead initiatives to enhance productivity and reduce waste. Utilize lean manufacturing and Kaizen methodologies to drive efficiency and process control. Prepare and maintain detailed manufacturing work instructions, routings, and process documentation. Ensure compliance with aerospace industry standards, including AS9100 and NADCAP. Participate in audits and ensure adherence to safety, quality, and regulatory requirements. Manage manufacturing projects from concept to completion, ensuring timelines and budgets are met. Coordinate with cross-functional teams, including production, quality, and procurement, to achieve project goals. Evaluate and recommend new tooling, equipment, and technologies to improve machining capabilities. Required Qualifications: Bachelor's degree in manufacturing engineering 2+ years of experience in a manufacturing or aerospace machining environment Must be authorized to work in the U.S. on a full-time bases without sponsorship now or in the future. The Company cannot offer employment to visa holders who require employer sponsorship in the future or cannot work now on a full-time basis. Must be able to perform work subject to ITAR/EAR regulations. Preferred Qualifications: Proficiency in CNC machining, programming, and set up. Knowledge of GD&T and aerospace standards. Strong problem solving and analytical skills. Proficiency in CAD/CAM software- preferably Siemens NX Familiarity with ERP/MRP systems Excellent communication skills and project management skills. Working Conditions: Work is performed in a climate-controlled, well lit, and reasonably clean aerospace manufacturing environment. Noise levels are generally below 80 decibels. Most work is performed on the shop floor in a manufacturing environment with required PPE. Role involves standing, walking, climbing stairs, and moving around equipment during daily activities. May occasionally involve stooping, kneeling, crouching, crawling, or lifting items up to 25 pounds. Work requires use of hands and arms to handle and manipulate parts, tools, and equipment. Tasks include a blend of hands-on activities with parts, tools, and equipment, and technical work such as reviewing data and using computer-based systems. Frequent interaction and communication with production teams, supply chain, and customers in a dynamic environment. Extended periods of focus and attention to detail may be required when working on technical projects. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. Acknowledgements: The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. Benefits: Pursuit Aerospace also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements, among other things. Equal Opportunity Employer: Pursuit Aerospace is an Equal Opportunity Employer. We adhere to all applicable federal, state, and local laws governing nondiscrimination in employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

We are seeking to recruit a Principal Optical Engineer for our location in Jupiter, Florida. The successful candidate will bridge multiple areas of technical expertise and experience to provide innovative and cost-effective solutions to demanding optical projection and imaging systems. RESPONSIBILITIES INCLUDE (BUT ARE NOT LIMITED TO): Core technical: • Invent new lens designs for complex opto-mechanical systems covering markets including digital imaging, aerospace and military, life-science, and entertainment. • Provide advanced analysis and characterization of optical systems, including customized performance simulations, in order to demonstrate compliance with detailed specifications. • Produce detailed optical tolerance and alignment budgets with as-built yield curves against performance metrics. • Reduce customer specifications and technical governing documents into design and test requirements; track compliance and verification through design completion. • Define (or develop) new compensation and optical performance tests to validate completed assemblies. • Act as systems/technical lead on projects, as required. • Present design outputs to the customer (write optical design reports and design review presentations including Preliminary Design Reviews and Critical Design Reviews) Sales and business development: • Support bid and proposal efforts thru preliminary designs and design evaluation. • Frequent and direct customer contact on projects you are supporting. • Write and present papers at technical conferences. Personnel development and recruiting: • Train other engineers on optical design methodologies, optical engineering best practice, and metrology • Interact and partner with engineering teams in Huntsville, AL, and Jena, Germany. • Identify, interview, and evaluate prospective new hires within engineering POSITION REQUIREMENTS: • Advanced degree; MS or PhD in Physics, Astronomy, Optics, Optical Engineering, or other equivalent area of expertise. • Related experience: > 10 years in the area of lens design, metrology, and system integration. • Proficiency in optical design and tolerancing using ZEMAX and/or CODE V. • Experience with software tools to automate optical design and analysis tasks (e.g., CODE V and ZEMAX macro languages, Python, Matlab, etc.) • Working knowledge of thin film physics and fabrication. • Excellent written and oral communication skills. • Must possess the following “soft skills”: Acts with Integrity, Attention to Detail, Clear Communicator, Goal Setting / Drives for Solutions, Prioritization/Multi-task, Problem Solver/Decision Maker, Self-Motivated, Team Player. • Familiarity with illumination and scattered light analysis using ZEMAX, FRED, or LightTools is preferred. • Knowledge of fabrication and manufacturing optical systems is highly desirable. • Competence in project management and leading a small team of engineers/designers is preferred. • Extended work hours may be required in order to meet project deadlines. • May require travel in support of customer meetings. • Relocation is strongly preferred, but not explicitly required, if an acceptable arrangement for remote location combined with extended onsite visits can be negotiated. • U.S. Citizenship or qualified U.S. worker.