Manufacturing engineer jobs in Lakeland, FL - 477 jobs

Manufacturing Process Engineer - Electronics / CCA Production Clearance Requirements: None Contract to Hire Pay Rate:$35/hr We are seeking a hands-on Manufacturing Process Engineer to support the design, optimization, and continuous improvement of manufacturing processes for circuit card assemblies (CCA), electronic module builds, and cable harness production. This role involves collaborating with engineering, operations, quality, and production teams to enhance manufacturability, improve workflow efficiency, develop tooling, and ensure compliance with specifications and regulations. The ideal candidate understands electronic manufacturing processes, can interpret engineering drawings, and has experience designing production layouts or writing process documentation. This is an excellent opportunity for a technical professional who enjoys supporting the production floor, driving improvements, and delivering high?quality manufacturing solutions. Responsibilities: Design and improve manufacturing processes, procedures, and production layouts for CCAs, electronic modules, and subassemblies. Review and interpret engineering prints to develop accurate and efficient manufacturing processes. Collaborate with design engineering to drive production improvements and optimize manufacturability. Support day?to?day production floor activities in partnership with operations and quality teams. Design, procure, and implement tooling, fixtures, and manufacturing aids to support efficient assembly processes. Incorporate inspection and test requirements into production plans where applicable. Monitor performance of machinery, equipment, and tools; investigate deficiencies and recommend corrective actions. Ensure compliance with manufacturing standards, specifications, and regulatory requirements. Provide feedback to engineering regarding design concepts and specification improvements. Drive continuous improvement initiatives focusing on quality, throughput, and process efficiency. Perform physical tasks including climbing stairs and lifting up to 20 lbs. Shift Schedule: Monday - Thursday, 5:00 AM to 3:30 PM EST Required Skills/Education: Experience designing or improving manufacturing processes for circuit card assemblies (CCA) or electronic modules. Ability to read, interpret, and apply engineering drawings, schematics, and technical documentation. Hands-on experience supporting production floor operations and resolving process issues. Ability to design or modify tooling, fixtures, and assembly processes. Strong understanding of manufacturing standards, quality requirements, and compliance processes. Ability to read/write in English. Ability to climb stairs and lift up to 20 lbs. Preferred Skills: Cable harness experience (routing, assembly, documentation). Experience writing or updating manufacturing process documentation. Familiarity with CCA assembly processes including soldering, inspection, reflow, or AOI. Experience working in electronics manufacturing or defense/aerospace environments. Strong continuous improvement mindset with the ability to identify process gaps and drive solutions. About Seneca Resources At Seneca Resources, we are more than just a staffing and consulting firm-we are a trusted career partner. With offices across the U.S. and clients ranging from Fortune 500 enterprises to government organizations, we connect talented professionals with meaningful work that drives impact. When you work with Seneca, you're choosing a company that invests in your success, celebrates your achievements, and provides opportunities aligned with your career goals. Our consultants and contractors enjoy competitive pay, comprehensive health, dental, and vision coverage, 401(k) plans, and continuous support from a dedicated team committed to your professional growth. Seneca Resources is proud to be an Equal Opportunity Employer, fostering a diverse and inclusive workplace where all qualified individuals are encouraged to apply.

We are looking for a MANUFACTURING PLANT ENGINEER to lead the maintenance team and ensure the safe and efficient operation of all manufacturing equipment and facilities. This role plays a key part in maintaining operational excellence and supporting continuous improvement initiatives. Responsibilities: Supervise and coordinate the maintenance team. Schedule and oversee all maintenance and repair activities. Conduct regular inspections of equipment and facilities. Troubleshoot and resolve equipment issues promptly. Implement and manage preventive maintenance programs. Maintain records of maintenance activities and equipment performance. Ensure compliance with safety regulations and standards. Train and develop maintenance staff. Collaborate with other departments to ensure seamless operations. Requirements: Bachelor's degree in engineering required; Mechanical Engineering preferred Proven experience as a maintenance supervisor in a manufacturing environment. Strong knowledge of mechanical, electrical, and plumbing systems. Excellent troubleshooting and problem-solving skills. Ability to read and interpret technical manuals and blueprints. Strong leadership and organizational skills. Good communication skills in English; bilingual in Spanish is a plus. Ability to work flexible hours, including weekends and holidays if needed. Benefits: Paid Vacations Paid Personal days Paid Holidays Paid Jury Duty Parental Leave Health insurance Life Insurance Vision and Dental insurance Retirement plan option Easy Foods Inc is an Equal Employment Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability status or any other protected status under federal, state or local law. Must be authorized to work for any employer in US. We are an E-Verify participant. Job Type: Full-time

Senior Project Engineer - Heavy Civil Construction Responsibilities Review contracts, plans, and specs in full Support the Project Manager and Superintendent with daily operations Assist with schedules, cost tracking, forecasting, and quantity reporting Solicit pricing from subcontractors and vendors, including change orders Coordinate materials, equipment, subcontractors, and field crews Support billing, cash flow projections, and change order processing Manage project documentation, submittals, permits (NPDES/SWPPP), and record drawings Review daily field reports for accuracy Assist with inspections, testing, utility coordination, and project closeout Handle additional tasks as assigned by the Project Manager Requirements BS in Civil Engineering (Construction Engineering & Management preferred) 5-8 years of heavy civil construction experience (field and/or office) Strong written and verbal communication skills Proficient in Excel, Word, and Primavera P6

where associates are heavily supervised and are expected to learn and assist with all engineering design aspects of a project. Once trained, associates in this position will be responsible for their own design projects and may check the work of others. Responsibilities Design all parking deck, building, and wall products, and associated connections With assistance, design laterals Independently manage engineering design aspects of a project with minimal assistance or guidance Review contract documents to be familiar with project requirements Attend project meetings as directed; may lead coordination meetings May write requests for information (RFI) With assistance, answer questions from drafting subcontractors Resolve engineering design issues independently (with the exception of laterals) Assist others with resolving engineering design issues (with the exception of laterals) Check engineering design calculations and details of others for accuracy, efficiency, and adherence to Metromont standards (with the exception of laterals) and Engineering Design Process Review erection drawings, master shop tickets, and any additional shop tickets to ensure designs and standards are followed With assistance, complete repairs Must adhere to all Metromont and OSHA safety rules and regulations. Job Description Strong personal organization skills Above average ability to manage multiple priorities Self-motivated Demonstrated ability to manage multiple projects and priorities, maintain project schedules, and work effectively within a project team Above average assertiveness; proactive addressing issues or problems on projects Able to adapt to changes in work schedules, tasks, or processes Values and demonstrates safe working behaviors Strong communication skills Able to document ongoing information on projects for record keeping purposes BS Civil Engineering required

Design manufacturing processes, procedures, and production layouts for cable harness assemblies and subassemblies. Interpret engineering prints to design processes and collaborate with design engineering to improve production. Provide support to the production floor by working with the operations team and focusing on continuous improvement. Design, procure, and implement tooling to support manufacturing processes, incorporating inspection and test requirements into the production plan as needed. Inspect the performance of machinery, equipment, and tools to verify efficiency, and investigate and initiate corrective actions for problems and deficiencies to ensure product quality. Provide guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensure processes and procedures are in compliance with regulations and specifications. Responsibilities * Design manufacturing processes and production layouts for cable harness assemblies and subassemblies. * Interpret engineering prints and collaborate with design engineering. * Support the production floor and focus on continuous improvement. * Design, procure, and implement tooling to support manufacturing processes. * Incorporate inspection and test requirements into production plans. * Inspect machinery, equipment, and tools to verify efficiency. * Investigate and initiate corrective actions for quality issues. * Provide guidance to engineering on design concepts and specifications. * Ensure compliance with regulations and specifications. Essential Skills * 4 years of experience with a BS degree in a relevant field. * 2 years of general assembly experience. * 1 year of experience with AutoCAD. * 1 year of blueprint reading skills. * 1 year of cable harness skills. * 1 year of wire harness print reading. Additional Skills & Qualifications * Knowledge of IPC-WHMA-A-620 standards is beneficial but not required. Work Environment This position is fully onsite with a 4/10 schedule. The role operates on the 2nd shift, running from 3:30 PM to 2:00 AM Job Type & Location This is a Contract position based out of Oldsmar, FL. Pay and Benefits The pay range for this position is $32.00 - $43.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Oldsmar,FL. Application Deadline This position is anticipated to close on Jan 21, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

* Based on requirements from customer orders, plan sequences of operations for fabrication and assembly of products. * Ensure efficient and effective manufacturing methods are used that are compatible to available machines. * Specifies, design and/or procures special tooling or equipment required to attain product per customer requirement with in budgeted cost and time. * Programs CNC machines to effectively and efficiently produce desired product. * Participate in the Company's Corrective Action and MRB Boards. * Analyze and resolve fabrication and tooling issues to avoid problems. * Create new or modify existing manufacturing drawings using CAD methodology. * Value engineer existing products and processes to reduce cost, lead time and cycle times. * Complies with all company policies/procedures. * Complies with all military and contractual requirements. Qualifications * CAD/CAM software use * Solid analytical skills and solution-driven thinking; collects and researches data; uses intuition and experience to complement data. Makes good decisions based upon a mixture of analysis, wisdom, experience and judgment. * Identifies and resolves problems in a timely manner; develops alternative solutions; works well in a group problem solving situations; presents ideas and information in a manner that gets others' attention; displays willingness to make decisions; exhibits sound and accurate judgment; supports and explains reasoning for decisions includes appropriate people in decision-making process. * Displays original thinking and creativity; Meets challenges with resourcefulness; Generates suggestions for improving work. * Learns quickly when facing new problems; a relentless and versatile learner; open to change; strives for continuous improvement of self and processes. * Enjoys working hard; is action oriented and full of energy; enjoys challenges; drives for results. Versatility, flexibility and a wiliness to work within constantly changing priorities with enthusiasm. * Excellent communication (oral and written) and interpersonal skills with the ability to convey information and ideas in a variety of media, tactful, confident, at all levels, internal and external. * Passion for data, analysis, trends, reporting and technology. Ability to read and interpret documents. Ability to write clearly and informatively routine reports, correspondence, and designs work flows and procedures. Presents numerical data effectively. * Demonstrated aptitude for process improvement and use of Lean and Six-Sigma resources and tools. * Thorough knowledge of Word, Excel, Power Point, Visio, Project, Solidworks, CATIA and other applicable tools. Education * Bachelor of Science Degree in Engineering (Mechanical or Industrial) with 2+ years' experience, or 10 years' of equivalent experience considered TES offers an extremely competitive compensation package that includes; major medical, vision, dental, life insurance, long-term disability insurance, vacation, holiday and 401K with company match. Interested? send your resume and cover letter to ****************** Thinkpath Engineering Services (TES) has been a global leader in Engineering and Design Services since 1977. Headquartered in Miamisburg, OH, TES has additional offices in Columbus, IN; Tampa, FL; Marietta, GA; and Toronto, ON. TES provides the following engineering services: * Engineering Design and Drafting Services: Conceptual design, analysis, layout, form/fit and function analysis, drafting (including Geometric Dimensioning and Tolerancing), Technical Data Packages (TDP) development as well as reverse engineering services * CAD Services: Includes parametric modeling, detailing, incorporation of ECNs into existing designs, BOM development, and conversion services between various CAD packages. * Technical Documentation: TES technical documentation team has the ability to author documents, incorporate engineering changes into existing documents, create illustrations and produce animations. * Contract and Direct Placement: Technical placement of engineers, designers, drafters, as well as additional technical professionals in various industries.

Job DescriptionDescription: This is a 100% on-site position based in St. Petersburg, FL. Candidates must report in person Monday through Friday. Relocation assistance is not provided. Develops, implements, and manages projects designed to enhance product development through process enhancement, equipment enhancement or equipment procurement in support of Lean organizational objectives. Initiates change initiatives that deliver quality, productivity, and material flow in a manufacturing environment. Performs engineering tasks by researching, collaborating, and monitoring progress/success with moderate direction. Essential Duties and Responsibilities include the following. Other duties may be assigned. 1. Investigates, designs, and implements approaches to computer integrated manufacturing and robotics equipment, manufacturing methods, equipment maintenance and improvement, and production processes to optimize resource utilization. 2. Delivers proposals to stakeholders and leadership to gain support and buy in for new product equipment requirements, manufacturing methods, and processes by using case study data from related industry activity. 3. Responsible for installing and commissioning new production units, monitoring development (i.e., modifications and upgrades) and troubleshooting existing equipment and processes. Investigates and implements equipment, tooling, materials, and methods of manufacturing. 4. Plans and coordinates for major equipment overhauls and executes plans within the time constraints of the business. 5. Writes, reviews, and revises operating instructions/procedures/change notices for production operations collaborating with the appropriate resources. 6. Conducts or coordinates times and motion studies to establish optimum production standards for production operations related to new product initiatives. 7. Develops techniques for monitoring, controlling, and improving product/process quality including coordination of vibration analysis through vendors. 8. Identifies and finds solutions for obsolete parts and/or mechanical systems in the manufacturing plant. 9. Assists and trains staff in Manufacturing families and Maintenance on tasks and skills needed. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Regular attendance during regularly scheduled business hours mandatory. In-person supervision during working hours and personal interaction with co-workers and operations leadership required. CAD/SolidWorks experience Familiarity with PLC systems (primarily Siemens and Allen Bradley) in a manufacturing environment Skills with tools and equipment for parts fabrication such as 3-D printers Education/Experience: Bachelor's degree in engineering is strongly preferred. Mechanical, Mechatronic/Robotic Engineering degrees preferred. Minimum of 5 years of experience in related activities (equipment design, re-engineering project work, new equipment design, operations leadership, mechanical engineering, etc.) in a manufacturing environment or a combination of relevant experience and education totaling 10 years. Strong facilitation and leadership skills Creative problem-solving skills Analytical strength Self-directed/self-starter Strong communication/collaboration skills Strong planning/organizational/follow up skills Knowledge of Lean manufacturing best practices Statistical process control knowledge Strong Mechanical knowledge Familiarity with WinCC/SCADA systems #LI-PW1 Requirements:

Job DescriptionPosition: Manufacturing Engineer **Reports to: ** Engineering Manager Job Hours: 7:00am-3:30pm shift, Mon-Fri. Flexible to work extended hours as needed. Job Summary: The primary function of the Manufacturing Engineer position is assisting in fabrication of waveguide systems and assemblies using the latest technology available. There will be a heavy emphasis on creating manufacturing steps related to CNC machining, braze. solder and welding requirements, Creation of manufacturing processes using ERP and Solidworks. *Supervisory Responsibilities: *n/a * * *Duties/Responsibilities: * Prepare/provide manufacturing drawings to the Manufacturing floor with precise instructions of required processing Create routing and bill of materials from customer information and requirements Design manufacturing process. Generate and improve workflows to reduce waste and cost. Develop SOPs (Standard Operating Procedures) Estimate costs and timeline for manufacturing. Preparing materials requisitions Working with vendors Tracking purchases Enter time estimates into ERP system to accurately predict times required Maintain project schedules to ensure timely completion. Meet technical, procedural, and schedule expectations of the customer and the organization. Follow industry standards as they pertain to documentation, policies, and expectations. Manage several assigned projects from inception to shipping. Develop and maintain strong relationships with prospective and existing customers. Maintains knowledge of new and developing manufacturing technology, equipment, and applications; applies this knowledge to recommend and implement new technology and processes. *Skills and Qualifications: * Strong interpersonal and oral and written communication skills. Knowledge of ERP systems mandatory Good time management skills, and the ability to meet deadlines. Possess a strong understanding of drafting principles, mechanical drawings, geometric dimensioning and tolerancing (GD&T). Familiarity with Military Specifications such as plating processes, Paint, and heat treat Proficient in SolidWorks CAD software. Solid knowledge of manufacturing methods and procedures. Analytical thinking skills: analyzing information and using logic to address work-related issues and problems. Proficient in Microsoft Office Suite software; Word, PowerPoint, and Excel. You must be a U.S. Person to apply for this position. Education and Experience: Bachelor's Degree or equivalent working experience in Mechanical, electrical or manufacturing engineering preferred. 3+ years working as an Engineer in a manufacturing plant required. Experience utilizing SolidWorks CAD required. CNC manufacturing experience is a plus. Accountabilities: Achieve production/productivity goals. Achieve deadlines (production, reporting). Achieve quality standards within acceptable limits (first-pass yield). Physical Demands: Must be able to lift up to 15 pounds at times. Prolonged periods sitting at a desk and working on a computer. Work Environment: Office environment The noise level in the work environment may be moderately loud. You should be proficient in: GD&T Project Management Continuous Improvement Advanced Product Quality Planning (APQP) AS9100 ITAR Compliance Design for Manufacturability (DFM) Design for Assembly (DFA) Mechanical Design & Engineering Product Design Experience Electrical / Electronic Systems Business-to-Business (B2B) Scheduling Experience CAD/CAM Software Excellent Communication Skills Experience in a Manufacturing Environment Blueprint Reading

CROWN Cork & Seal USA, Inc., a wholly owned company of Crown Holdings, Inc. is a global leader in the design, manufacture and sale of packaging products for consumer goods. At Crown, we are passionate about helping our customers build their brands and connect with consumers around the world. We do this by delivering innovative packaging that offers significant value for brand owners, retailers and consumers alike. With operations in 39 countries employing approximately 25,000 people and net sales of approximately $12 billion, we are uniquely positioned to bring best practices in quality and manufacturing to our customers to drive their businesses locally and globally. Sustaining a leadership position requires us to build a team of highly talented, dedicated and driven individuals. Division: Crown's Food Division is a premier manufacturer of food cans and ends. Our complete array of food packaging serves a variety of markets, including fruit, vegetables, dairy, fish, meat, ready meals, pet food, infant milk powder and other dry food products. We offer a wide selection of food cans from round to bowl as well as shaped cans. We truly focus on excellence. Here is your chance to join the Crown Food Business Unit. Location: Ideal candidate will reside near a major airport in the Midwest and/or Eastern Region of the US as this position will require up to 70% regular travel to the Plant locations. Position Overview: The Manufacturing Engineering (with an Electrical Engineering emphasis) will support eight (8) facilities of the North American Food Division manufacturing operations. This position will work closely with the manufacturing facilities in regard to electrical programming, problem solving, etc. for both the 3-Piece and 2-Piece steel and aluminum food cans and end processes. Duties And Responsibilities: Reporting directly to the Sr Manager Production Engineering (Electrical) duties would include but not be limited to the following: Providing problem-solving on electrical technical matters relating to food can and end performance Developing full documentation package of new and existing installations Continued support of new installations and plants until production efficiencies and goals are met Support plants and personnel as required to identify production problems or issues, identify viable solutions and implement the same Develop job completion schedules and monitor their progress Guide, support and train plant electrical teams Qualifications: In addition to the specific responsibilities listed above, the ideal candidate will possess the following: Minimum Requirements BS degree in Electrical or Electronics Engineering or a related discipline 5+ years in a packaging manufacturing environment, food production or a similar industry. Strong technical knowledge demonstrating broad understanding of electrical power and controls design and installation Demonstrated experience in PLC logic programming, documentation, and troubleshooting control programs (Allen Bradley, Siemens, Modicon, etc.) Experience with facilities power distribution (including voltages to 600v & three phase) and control systems and subsystems Power transmission equipment such as gearboxes, drive trains, conveying equipment, etc. Proven record of delivering engineering outputs to achieve scheduled targets Effective communication skills are needed for this role, both verbal and written as well as the ability to interact with employees at all levels of the organization. Self-motivated and eager to take the initiative; with the ability to work effectively in a team setting and as an individual Well organized and detail oriented with good time management skills Strong PC skills are a must, especially using Word, Outlook, and Excel. Committed to on-going personal development and career growth Preferred Requirements Steel and/or aluminum manufacturing environment experience would be ideal A certification in Six Sigma and/or Lean Manufacturing would be a plus Physical Requirements While performing the duties of this job, the associate is regularly required to sit, stand, walk, use hands, reach with hands and arms, and may be required to balance, stoop, kneel, crouch, or crawl The associate may lift and/or move up to 50 pounds Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus Working Conditions Will be required to perform job duties outside of the typical office setting in a plant environment as well as in an office. While performing the duties of this job, the associate may be exposed to moving mechanical parts and vehicular traffic. The associate may be exposed to a wide range of temperatures. The noise level is frequently loud. *Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

Job Description Manufacturing Engineer The Manufacturing Engineer is responsible for continuous improvement and support of the production of current and future product lines. Focus is on improving manufacturing processes, enhancing product quality, and increasing efficiencies. Collaboration with cross-functional teams to design and implement innovative solutions. Key responsibilities include: Process Development & Optimization - Design, implement, and refine manufacturing processes and tooling to enhance production operations. Standardization - Develop flexible work instructions to standardize fabrication and assembly procedures, especially for semi-custom product lines. Testing & Quality Assurance - Design and implement testing equipment and procedures to ensure design validation, maintain quality control, and meet product certification requirements. Cross-functional Collaboration - Collaborate with engineering and manufacturing teams to support new product development and introduce new innovative solutions. CNC Programming - Develop and implement G-code programming for CNC machines to optimize machining processes. Safety Compliance - Maintain and promote safe working environment in accordance with best practices and safety regulations. Requirements: Proficiency in CNC programming and understanding manufacturing automation. Experience with CAD software and manufacturing simulation tools; primarily Solidworks, Mastercam, and AutoCad/Draftsight. Excellent problem-solving skills and attention to detail. Ability to work effectively in a team-oriented environment, with a collaborative approach to solving problems. Strong attention to detail and a commitment to high-quality standards. Knowledge of testing procedures, quality control methodologies, and relevant certification processes. Understanding of manufacturing safety protocols. Ability to create G-code programming for CNC machines Essential Functions: Design, develop, and implement manufacturing processes and systems. Analyze and improve existing manufacturing processes for efficiency and effectiveness. Conduct time and motion studies to identify opportunities for process improvements. Collaborate with product design teams to ensure manufacturability and cost-effectiveness of new products. Develop and maintain process documentation, including work instructions and standard operating procedures. Troubleshoot and resolve manufacturing issues, providing technical support to production teams. Lead and participate in continuous improvement initiatives Evaluate and recommend new manufacturing technologies and equipment. Conduct training sessions for production staff on new processes and equipment. Ensure compliance with safety and quality standards in all manufacturing activities. Experience: Minimum of Associates Degree in Manufacturing Engineering, Mechanical Engineering, or related field. Experience in a manufacturing environment (3+ years), lean manufacturing principles and quality improvement methodologies. Experience with CAD software and manufacturing simulation tools; Solidworks, Mastercam, and AutoCad/Draftsight. Job Type: Full-time Schedule: 8-hour shift Day shift Monday to Friday Work Location: In person - Charlestown, NH In person - Tampa, FL

Manufacturing Process Engineer - Electronics / CCA Production Clearance Requirements: None Contract to Hire Pay Rate:$35/hr We are seeking a hands-on Manufacturing Process Engineer to support the design, optimization, and continuous improvement of manufacturing processes for circuit card assemblies (CCA), electronic module builds, and cable harness production. This role involves collaborating with engineering, operations, quality, and production teams to enhance manufacturability, improve workflow efficiency, develop tooling, and ensure compliance with specifications and regulations. The ideal candidate understands electronic manufacturing processes, can interpret engineering drawings, and has experience designing production layouts or writing process documentation. This is an excellent opportunity for a technical professional who enjoys supporting the production floor, driving improvements, and delivering high?quality manufacturing solutions. Responsibilities: Design and improve manufacturing processes, procedures, and production layouts for CCAs, electronic modules, and subassemblies. Review and interpret engineering prints to develop accurate and efficient manufacturing processes. Collaborate with design engineering to drive production improvements and optimize manufacturability. Support day?to?day production floor activities in partnership with operations and quality teams. Design, procure, and implement tooling, fixtures, and manufacturing aids to support efficient assembly processes. Incorporate inspection and test requirements into production plans where applicable. Monitor performance of machinery, equipment, and tools; investigate deficiencies and recommend corrective actions. Ensure compliance with manufacturing standards, specifications, and regulatory requirements. Provide feedback to engineering regarding design concepts and specification improvements. Drive continuous improvement initiatives focusing on quality, throughput, and process efficiency. Perform physical tasks including climbing stairs and lifting up to 20 lbs. Shift Schedule: Monday - Thursday, 5:00 AM to 3:30 PM EST Required Skills/Education: Experience designing or improving manufacturing processes for circuit card assemblies (CCA) or electronic modules. Ability to read, interpret, and apply engineering drawings, schematics, and technical documentation. Hands-on experience supporting production floor operations and resolving process issues. Ability to design or modify tooling, fixtures, and assembly processes. Strong understanding of manufacturing standards, quality requirements, and compliance processes. Ability to read/write in English. Ability to climb stairs and lift up to 20 lbs. Preferred Skills: Cable harness experience (routing, assembly, documentation). Experience writing or updating manufacturing process documentation. Familiarity with CCA assembly processes including soldering, inspection, reflow, or AOI. Experience working in electronics manufacturing or defense/aerospace environments. Strong continuous improvement mindset with the ability to identify process gaps and drive solutions. About Seneca Resources At Seneca Resources, we are more than just a staffing and consulting firm-we are a trusted career partner. With offices across the U.S. and clients ranging from Fortune 500 enterprises to government organizations, we connect talented professionals with meaningful work that drives impact. When you work with Seneca, you're choosing a company that invests in your success, celebrates your achievements, and provides opportunities aligned with your career goals. Our consultants and contractors enjoy competitive pay, comprehensive health, dental, and vision coverage, 401(k) plans, and continuous support from a dedicated team committed to your professional growth. Seneca Resources is proud to be an Equal Opportunity Employer, fostering a diverse and inclusive workplace where all qualified individuals are encouraged to apply.

JOB TITLE: (P) Manufacturing Engineer PAY RATE: Up to $43/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: Job Type: Contract (12 months with potential for extension) Shift: Monday-Thursday, 3:30 PM - 2:00 AM EST Industry: Aerospace / Defense / Aviation Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority access via Tier 1 supplier Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Summary: Designs manufacturing processes, procedures, and production layouts for cable harness assemblies and subassemblies. Interprets engineering drawings to develop and optimize processes and collaborates with design engineering to improve manufacturability. Supports the production floor by partnering with operations to drive continuous improvement. Designs, procures, and implements tooling to support manufacturing processes and may incorporate inspection and test requirements into production planning. Monitors equipment and tool performance, investigates deficiencies, and initiates corrective actions to ensure product quality and process efficiency. Provides input to engineering on design concepts and specifications to optimize manufacturing methods. Ensures all processes and procedures comply with applicable regulations and specifications. Requirements: Bachelor's degree in Manufacturing, Mechanical, Industrial Engineering, or a related discipline Must understand cable assembly processes Must be able to read and write in English Must be a U.S. Person (as defined by ITAR). About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights-apply today!

About the Role Florida Gibsonton Company Siemens Energy, Inc. Organization Gas Services Business Unit Central Full / Part time Full-time Experience Level Experienced Professional A Snapshot of Your Day Siemens Energy's blades and vanes casting operation in Gibsonton, Florida is looking forward to adding the passionate Ceramic Product Engineer to the team! You will join a team of experts and skilled workers with an opportunity to learn and meet ongoing growth targets. You will work in collaboration with the design team during and after product development and will have the opportunity to lead core development projects! How You'll Make an Impact * Collaborate with Siemens Energy design colleagues during and after product development, participating in design reviews and quoting. * Define process-relevant core geometry in coordination with engineering and internal teams to support new component development. * Plan material and equipment needs while leading core development projects to drive innovation and efficiency. * Work with internal and external customer representatives to develop new products and meet program requirements. * Review customer specifications and blueprints to determine necessary procedures, testing, and routing sequences. * Identify opportunities for product improvements, recommend tooling enhancements, and coordinate reworks with validation of results. What You Bring * BS in Mechanical Engineering or another related field * 3 or more years of experience in investment casting supply chain (core or casting preferred). Those with more years of experience may be considered for a higher level. * Aerospace casting experience preferred. * Six Sigma training preferred (Green or Black Belt). * Applicants must be legally authorized for employment in the United States without the need for current or future employer-sponsored work authorization. Siemens Energy employees with current visa sponsorship may be eligible for internal transfers. * This position will require an export license from the Department of Commerce, Bureau of Industry and Security and/or the Department of State, Directorate of Defense Trade Controls. Issuance of any required license is a prerequisite for this position. The candidate must be able to work with export-controlled technology in accordance with US export control law. About the Team Gas Services Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: ******************************************** Rewards * Career growth and development opportunities; supportive work culture * Company paid Health and wellness benefits * Paid Time Off and paid holidays * 401K savings plan with company match * Family building benefits * Parental leave ************************************ Equal Employment Opportunity Statement Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more.

Are you ready for what's next? Come explore opportunities within Brunswick, a global marine leader committed to challenging conventions and innovating next-generation technologies that transform experiences on the water and beyond. Brunswick believes “Next Never Rests™,” and we offer a variety of exciting careers and growth opportunities within united teams defining the future of marine recreation. Provide technical process support in a cross-functional, collaborative, team environment for an electronics production operation which includes SMT and through-hole electronics assembly, conformal coating and encapsulation, final assembly, and test. Focus will be on production assembly operations downstream of the SMT PCB population process. This includes new product introduction and current product support. Work closely with design engineering, test engineering, production, and quality department personnel to ensure successful, timely product launches and conformance to specifications. Coordination and tracking of multiple projects are key to success. Your primary duties and responsibilities include but not limited to: Participate and contribute to DFM/DFA meetings with design engineering to optimize designs of electronic assemblies for manufacturability Define process for new product and process improvement for current product in accordance with IPC industry standards Review and approve engineering drawings Investigate and solve quality problems Select electronic components and select substitutes based on specifications Respond to engineering questions and review/approve files from PCB suppliers Create and revise documentation including process flow, PFMEA, control plans, detailed operator work instructions, etc. Document, track and report out on project status Train production trainers on new products and processes Coordinate with purchasing, production, and quality personnel to accomplish design validation builds, process validation builds and start of production Facilitate production equipment selection, financial justification, and implementation Knowledge, Skills, and Ability Requirements Must be able to read and interpret engineering drawings Must be able to read and interpret electronic schematic diagrams Must have a deep working knowledge of electrical theory and common electronic components and their functions Must understand manufacturing processes commonly used in the manufacture of electronic assemblies Must have a personal knowledge of IPC standards and their application to electronics manufacturing Mastery of L.S.S. and/or lean manufacturing principles and tools is a plus Proficiency in the use of PADS or similar PCB design software is a plus Proficient user of Microsoft Office software (Word, Excel, Outlook, PowerPoint, Project, Visio, etc.) Must have excellent, written and verbal communication skills in English Education and Experience Requirements Bachelor's degree in engineering or related technical field required; electrical/electronics engineering degree is preferred 5+ years electrical/electronics, manufacturing engineering experience in a manufacturing facility with firsthand responsibility for new product introduction of electronic assemblies Experience in creation of documentation required for new product launch including Work Instructions, Process Flow, PFMEA, control plans, etc. Experience working in a collaborative team environment Experience working with potting and conformal coating is a plus Experience working in an ISO 9001 (or other related quality standard) compliant organization is strongly preferred LSS Green Belt certification is a plus The anticipated pay range for this position is 72,000 - 115,300 annually. The actual base pay offered will vary depending on multiple factors including job- related knowledge/skills, relevant experience, business needs, and geographic location. In addition to base pay, this position is eligible for an annual discretionary bonus. At Brunswick, it is not typical for an individual to be hired at or near the top end of the salary range for their role. Compensation decisions are dependent upon the specifics of the candidate's qualifications and the business context. This position is eligible to participate in Brunswick's comprehensive and high-quality benefits offerings, including medical, dental, vision, paid vacation, 401k (up to 4% match), Health Savings Account (with company contribution), well-being program, product purchase discounts and much more. Details about our benefits can be found here. Why Brunswick: Whatever tomorrow brings, we'll be at the leading edge. As the clear leader in the marine industry, we're committed to our values and supporting our exceptional people. We offer and encourage growth opportunities within and across our many brands. In addition, we're proud of being recognized for making a splash with numerous awards! About Mercury Marine: Mercury Marine is a world leading manufacturer of marine propulsion systems. A $2.6 billion division of Brunswick Corporation (NYSE: BC), Mercury designs, manufactures and distributes engines, services and parts for recreational, commercial and government marine applications, empowering boaters with products that are easy to use, extremely reliable and backed by the most dedicated customer support in the world with 10,000 service points globally. Mercury's industry-leading brand portfolio includes Mercury outboard engines; Mercury MerCruiser sterndrive and inboard packages; Mercury global parts and accessories including propellers, and SmartCraft electronics; Power Products Integrated Solutions; MotorGuide trolling motors; Attwood, Garelick and Whale marine parts; Land 'N' Sea, BLA, Payne's Marine, Kellogg Marine & Lankhorst Taselaar marine parts distribution; and Mercury and Quicksilver parts and oils. More information is available at mercurymarine.com. Next is Now! We value growth and development, recognizing that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please still consider applying. Brunswick is an Equal Opportunity Employer and considers all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or any other characteristic protected by federal, state, or local law. Diversity of experience and skills combined with passion is key to innovation and inspiration and we encourage individuals from all backgrounds to apply. If you require accommodation during the application or interview process, please contact ****************************** for support. For more information about EEO laws, - click here Brunswick and Workday Privacy Policies Brunswick does not accept applications, inquiries or solicitations from unapproved staffing agencies or vendors. For help, please contact our support team at: ****************************** or ************. All job offers will come to you via the candidate portal you create when applying through a posted position through https:///************************** If you are ever unsure about what is being required of you during the application process or its source, please contact HR Shared Services at ************ or ******************************. #Brunswick Corporation - Mercury Marine

The Senior Casting Technology Manufacturing Engineer provides technical leadership for SX or equiax investment castings across the value stream. You will partner with suppliers and cross-functional teams to drive root cause problem solving, improve producibility, increase productivity, and deliver on business objectives. You will own supplier technical relationships, coach on internal processes/specs/methods, qualify new suppliers, and help develop and industrialize alternate casting technologies. **Job Description** **Roles and Responsibilities** + Provide process and product technical leadership for the Castings commodity, including SX or equiax investment castings. + Develop strong working relationships with casting supplier technical teams. + Partner with suppliers to identify and implement corrective actions to eliminate the cause and prevent recurrence. + Act as a change agent to advance world-class performance and standard work across the supply base. + Own supplier technical relationships; mentor suppliers on GE Aerospace processes, specifications, and methods; ensure compliance and capability. + Lead cross-functional problem solving, to identify true root cause and implement sustainable corrective and preventive actions. + Improve manufacturability through design-for-casting, specification clarity, and process capability improvements. + Clearly communicate progress, risks, challenges, and countermeasures to leadership and stakeholders. + Review and approve significant/special processes; ensure adherence to standards and qualification requirements. + Collaborate with Quality and Design Engineering to ensure new and changed processes meet established metrics; align with other commodities on strategy and objectives + Partner with suppliers and internal teams to interpret drawings/specifications, ensuring conformance and clarity. + Identify and onboard new suppliers; lead technical qualifications and readiness through Manufacturing and Quality Planning reviews and support supplier Castings Audits. + Ability to travel to supplier sites 30%-50% **Minimum Required Qualifications** + Bachelor's degree in Engineering (Materials/Metallurgy, Mechanical, Manufacturing, or related field) + Minimum of 5 years of materials engineering, castings, mechanical engineering or a related field **Desired Characteristics and Experience** + Additive manufacturing experience. + Metal Injection Molding (MIM) experience. + Proficiency with Siemens NX or comparable CAD. + Sand Castings Experience. + Titanium Experience. + Significant experience in investment castings (SX or equiax), with demonstrated yield, capability, and cost improvements + Hands-on expertise across investment casting special processes (wax, shell, melt/solidification control, heat treat, HIP, NDT) and specification compliance. + Strong problem solving and project management skills. + New Product Introduction experience. + Experience maturing technologies and processes. + Excellent communication and stakeholder management; ability to influence without authority + Humble learner: Respectful, receptive to feedback, agile, and continuously improving; seeks out diverse perspectives. + Transparent communicator: Shares critical information proactively; speaks with candor; engages constructively to resolve issues. + Focused and accountable: Fast learner with strong ownership; meets commitments and drives results against SQDC targets ( _Safety, Quality, Delivery and Cost in that order)_ . **Pay and Benefits:** + The salary range for this position is $ 116,000.00 - 155,000.00. The specific salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. + GE provides a comprehensive benefits package that provides access to plans which support the overall wellbeing of our employees and their dependents. These benefits include, but are not limited to, health care coverage (medical, dental, vision, pharmacy), a retirement plan that includes Company Retirement Savings and a 401K with Company matching, Life Insurance options, Disability coverage, paid time-off, EAP, and more. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Design manufacturing processes, procedures, and production layouts for cable harness assemblies and subassemblies. Interpret engineering prints to design processes and collaborate with design engineering to improve production. Provide support to the production floor by working with the operations team and focusing on continuous improvement. Design, procure, and implement tooling to support manufacturing processes, incorporating inspection and test requirements into the production plan as needed. Inspect the performance of machinery, equipment, and tools to verify efficiency, and investigate and initiate corrective actions for problems and deficiencies to ensure product quality. Provide guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensure processes and procedures are in compliance with regulations and specifications. Responsibilities + Design manufacturing processes and production layouts for cable harness assemblies and subassemblies. + Interpret engineering prints and collaborate with design engineering. + Support the production floor and focus on continuous improvement. + Design, procure, and implement tooling to support manufacturing processes. + Incorporate inspection and test requirements into production plans. + Inspect machinery, equipment, and tools to verify efficiency. + Investigate and initiate corrective actions for quality issues. + Provide guidance to engineering on design concepts and specifications. + Ensure compliance with regulations and specifications. Essential Skills + 4 years of experience with a BS degree in a relevant field. + 2 years of general assembly experience. + 1 year of experience with AutoCAD. + 1 year of blueprint reading skills. + 1 year of cable harness skills. + 1 year of wire harness print reading. Additional Skills & Qualifications + Knowledge of IPC-WHMA-A-620 standards is beneficial but not required. Work Environment This position is fully onsite with a 4/10 schedule. The role operates on the 2nd shift, running from 3:30 PM to 2:00 AM Job Type & Location This is a Contract position based out of Oldsmar, FL. Pay and Benefits The pay range for this position is $32.00 - $43.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Oldsmar,FL. Application Deadline This position is anticipated to close on Jan 21, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

CROWN Cork & Seal USA, Inc., a wholly owned company of Crown Holdings, Inc. is a global leader in the design, manufacture and sale of packaging products for consumer goods. At Crown, we are passionate about helping our customers build their brands and connect with consumers around the world. We do this by delivering innovative packaging that offers significant value for brand owners, retailers and consumers alike. With operations in 39 countries employing approximately 25,000 people and net sales of approximately $12 billion, we are uniquely positioned to bring best practices in quality and manufacturing to our customers to drive their businesses locally and globally. Sustaining a leadership position requires us to build a team of highly talented, dedicated and driven individuals. Division: Crown's Food Division is a premier manufacturer of food cans and ends. Our complete array of food packaging serves a variety of markets, including fruit, vegetables, dairy, fish, meat, ready meals, pet food, infant milk powder and other dry food products. We offer a wide selection of food cans from round to bowl as well as shaped cans. We truly focus on excellence. Here is your chance to join the Crown Food Business Unit. Location: Ideal candidate will reside near a major airport in the Midwest and/or Eastern Region of the US as this position will require up to 70% regular travel to the Plant locations. Position Overview: The Manufacturing Engineering (with an Electrical Engineering emphasis) will support eight (8) facilities of the North American Food Division manufacturing operations. This position will work closely with the manufacturing facilities in regard to electrical programming, problem solving, etc. for both the 3-Piece and 2-Piece steel and aluminum food cans and end processes. Duties And Responsibilities: Reporting directly to the Sr Manager Production Engineering (Electrical) duties would include but not be limited to the following: Providing problem-solving on electrical technical matters relating to food can and end performance Developing full documentation package of new and existing installations Continued support of new installations and plants until production efficiencies and goals are met Support plants and personnel as required to identify production problems or issues, identify viable solutions and implement the same Develop job completion schedules and monitor their progress Guide, support and train plant electrical teams Qualifications: In addition to the specific responsibilities listed above, the ideal candidate will possess the following: Minimum Requirements BS degree in Electrical or Electronics Engineering or a related discipline 5+ years in a packaging manufacturing environment, food production or a similar industry. Strong technical knowledge demonstrating broad understanding of electrical power and controls design and installation Demonstrated experience in PLC logic programming, documentation, and troubleshooting control programs (Allen Bradley, Siemens, Modicon, etc.) Experience with facilities power distribution (including voltages to 600v & three phase) and control systems and subsystems Power transmission equipment such as gearboxes, drive trains, conveying equipment, etc. Proven record of delivering engineering outputs to achieve scheduled targets Effective communication skills are needed for this role, both verbal and written as well as the ability to interact with employees at all levels of the organization. Self-motivated and eager to take the initiative; with the ability to work effectively in a team setting and as an individual Well organized and detail oriented with good time management skills Strong PC skills are a must, especially using Word, Outlook, and Excel. Committed to on-going personal development and career growth Preferred Requirements Steel and/or aluminum manufacturing environment experience would be ideal A certification in Six Sigma and/or Lean Manufacturing would be a plus Physical Requirements While performing the duties of this job, the associate is regularly required to sit, stand, walk, use hands, reach with hands and arms, and may be required to balance, stoop, kneel, crouch, or crawl The associate may lift and/or move up to 50 pounds Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus Working Conditions Will be required to perform job duties outside of the typical office setting in a plant environment as well as in an office. While performing the duties of this job, the associate may be exposed to moving mechanical parts and vehicular traffic. The associate may be exposed to a wide range of temperatures. The noise level is frequently loud. *Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

**A Snapshot of Your Day** Siemens Energy's blades and vanes casting operation in Gibsonton, Florida is looking forward to adding the passionate Ceramic Product Engineer to the team! You will join a team of experts and skilled workers with an opportunity to learn and meet ongoing growth targets. You will work in collaboration with the design team during and after product development and will have the opportunity to lead core development projects! **How You'll Make an Impact** + Collaborate with Siemens Energy design colleagues during and after product development, participating in design reviews and quoting. + Define process-relevant core geometry in coordination with engineering and internal teams to support new component development. + Plan material and equipment needs while leading core development projects to drive innovation and efficiency. + Work with internal and external customer representatives to develop new products and meet program requirements. + Review customer specifications and blueprints to determine necessary procedures, testing, and routing sequences. + Identify opportunities for product improvements, recommend tooling enhancements, and coordinate reworks with validation of results. **What You Bring** + BS in Mechanical Engineering or another related field + 3 or more years of experience in investment casting supply chain (core or casting preferred). Those with more years of experience may be considered for a higher level. + Aerospace casting experience preferred. + Six Sigma training preferred (Green or Black Belt). + Applicants must be legally authorized for employment in the United States without the need for current or future employer-sponsored work authorization. Siemens Energy employees with current visa sponsorship may be eligible for internal transfers. + This position will require an export license from the Department of Commerce, Bureau of Industry and Security and/or the Department of State, Directorate of Defense Trade Controls. Issuance of any required license is a prerequisite for this position. The candidate must be able to work with export-controlled technology in accordance with US export control law. **About the Team** **Gas Services** Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. **Who is Siemens Energy?** At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: ******************************************** **Rewards** + Career growth and development opportunities; supportive work culture + Company paid Health and wellness benefits + Paid Time Off and paid holidays + 401K savings plan with company match + Family building benefits + Parental leave **************************************** Equal Employment Opportunity Statement Siemens Energy is an Equal Opportunity and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law.

Are you ready for what's next? Come explore opportunities within Brunswick, a global marine leader committed to challenging conventions and innovating next-generation technologies that transform experiences on the water and beyond. Brunswick believes “Next Never Rests™,” and we offer a variety of exciting careers and growth opportunities within united teams defining the future of marine recreation. Your primary duties and responsibilities include but not limited to: Participate and contribute to DFM/DFA meetings with design engineering to optimize designs of electronic assemblies for manufacturability Define process for new product and process improvement for current product in accordance with IPC industry standards Review and approve engineering drawings Investigate and solve quality problems Select electronic components and select substitutes based on specifications Respond to engineering questions and review/approve files from PCB suppliers Create and revise documentation including process flow, PFMEA, control plans, detailed operator work instructions, etc. Document, track and report out on project status Train production trainers on new products and processes Coordinate with purchasing, production, and quality personnel to accomplish design validation builds, process validation builds and start of production Facilitate production equipment selection, financial justification, and implementation Next is Now! We value growth and development, recognizing that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please still consider applying. Brunswick is an Equal Opportunity Employer and considers all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or any other characteristic protected by federal, state, or local law. Diversity of experience and skills combined with passion is key to innovation and inspiration and we encourage individuals from all backgrounds to apply. If you require accommodation during the application or interview process, please contact ****************************** for support. For more information about EEO laws, - click here Brunswick and Workday Privacy Policies Brunswick does not accept applications, inquiries or solicitations from unapproved staffing agencies or vendors. For help, please contact our support team at: ****************************** or ************. All job offers will come to you via the candidate portal you create when applying through a posted position through https:///************************** If you are ever unsure about what is being required of you during the application process or its source, please contact HR Shared Services at ************ or ******************************. #Brunswick Corporation - Mercury Marine