Manufacturing engineer jobs in Orangevale, CA - 393 jobs

SALARY: $80,000-$150,000+ (depending on experience) The Mechanical & Plumbing Engineer provides technical leadership, design services, and engineering coordination in support of estimating, preconstruction, project management, detailing, fabrication, and field operations. This role is responsible for developing cost-effective, code-compliant, energy-efficient, and constructible mechanical and plumbing systems that align with company standards, protect project scope and budget, and support successful project execution across all delivery methods, with a strong emphasis on design-build work . REQUIREMENTS: Professional Engineer (PE) license in Mechanical Engineering. 5+ years of experience in mechanical engineering design. Proven ability to design projects independently and manage multiple assignments. Strong background in plumbing and mechanical systems. Experience with design-build projects, ranging from unit change-outs to full ground-up builds. Ability to work on large TI (Tenant Improvement) projects and new building construction. DUTIES & RESPONSIBILITIES 1. Design cost-effective, energy-efficient mechanical and plumbing systems that meet client requirements, budget constraints, and company standards. 2. Provide complete, code-compliant system layouts, drawings, specifications, and engineering narratives for all project delivery methods. 3. Perform system calculations including loads, sizing, pressure drops, and energy analysis. 4. Maintain current knowledge of applicable mechanical, plumbing, energy, and building codes, including AHJ requirements. 5. Participate in energy evaluations, payback analyses, and sustainability initiatives (including LEED support where applicable). 6. Support estimating with design-build concepts, system layouts, technical clarifications, and engineering narratives. 7. Review plans and specifications for scope completeness, constructability, risks, and opportunities. 8. Review and validate proposed substitutions and “equals” prior to bid submission and document approved alternatives. 9. Assist estimating and project management with obtaining complete, compliant mechanical equipment quotes, including coordination with manufacturers' representatives. 10. Maintain a clear understanding of project scope, estimated cost, design budget, risks, and optimization opportunities. 11. Collaborate with detailing, fabrication, and field teams to ensure constructability and early system optimization. 12. Participate in project kickoff meetings, coordination meetings, and strategic planning sessions. 13. Provide technical support to project management and detailing teams on both design-build and plan/spec projects, including drawing interpretation and RFI production and review. 14. Participate in and oversee system optimization efforts throughout construction. 15. Support PlanGrid (or equivalent platform) population and maintenance in accordance with company procedures. 16. Prepare permit-ready, budget-compliant design drawings and documentation for design-build and special projects. 17. Coordinate with AHJs to obtain permits and resolve permitting issues, including in-person permit acquisition when required. 18. Support inspections and address code or compliance comments as necessary. 19. Develop and maintain professional working relationships with clients, vendors, suppliers, subcontractors, unions, and AHJs. 20. Manage external engineering and detailing resources when outsourced, including defining scope, schedule, and deliverables in coordination with project management. 21. Support equipment procurement and technical coordination throughout the project lifecycle. 22. Maintain and update company mechanical, plumbing, and engineering standards and specifications. 23. Participate in the annual refresh of company construction and design standards. 24. Apply lessons learned from completed projects to improve future designs and processes. 25. Collaborate across departments to continuously improve design quality, constructability, and efficiency. 26. Maintain professional conduct and effective communication with all internal and external stakeholders. 27. Report to work on time and maintain an excellent attendance record. 28. Execute all duties and responsibilities in a professional manner. 29. Comply with all company policies, procedures, and the Employee Handbook. 30. Perform other duties as assigned by Engineering Leadership, Preconstruction, or Executive Management.

KGS Group is seeking a Mechanical Engineer to join our growing practice in Bellevue, Washington or Granite Bay, CA. About Us We are KGS Group, an employee-owned, multidisciplinary engineering consulting firm serving clients throughout North America. We're different than traditional engineering firms. We believe a commitment to lasting relationships is just as critical as the expertise applied in our work. To us that means we put our clients and people first. We have the discipline to consistently deliver KGS Quality, never taking the easy way out. We always look closer and dig deeper. And no matter the project, we care enough to do it right. As an employee-owned company, we're invested in our work and our people. Working with us means you'll be part of some of the most interesting projects up and down the west coast. With the extensive, wide-ranging expertise within our company, you'll have countless opportunities to learn and grow. Many of our core clients operate in the hydropower and water management fields. We are growing our U.S. team to continue to provide our industry-leading services to these clients. As we expand our presence on the west coast, we are looking for strong candidates at all levels to join our team! The Role As a Mechanical Engineer, you will be responsible for providing engineering inputs integral to both small and large-scale hydro and dam projects. You will lead technical teams and mentor junior staff, support production, and coordinate delivery of engineering work products with multi-disciplinary project team members and external stakeholders. You will not only support and help grow the broader engineering team capabilities, but your particular focus will be on continuing the development of our hydropower capabilities and working with key staff in growing the business. You'll also be involved in supporting project management duties, coordinating with internal and external clients as well as assisting with guiding and mentoring other engineers within the team. In this role you will lead teams conducting technical work involving turbines, generators, and their associated ancillary systems, as well as other balance of plant systems such as gates, hoists, cranes, pumping systems, lubrication systems, and other critical equipment at hydroelectric powerplants. You will lead teams conducting technical work for feasibility studies, engineering designs, preparation of construction drawings and specifications, and carrying out site visits and inspections. You will be working in a collaborative environment with a great team of engineers, technicians, scientists, and other industry-leading peers, and you will also interface directly with clients. Key Responsibilities: Design modifications to, or entirely new, mechanical systems related to dams, control structures, water retaining structures, and hydroelectric generating stations. Execute multiple projects from the proposal stage through to completion. Projects will include a variety of small to large projects involving water resources, flood control, and hydroelectric sectors. Conduct site investigations, condition assessments, and provide design and construction support. Mechanical engineering design and refurbishment of cranes, hoists, hydroelectric turbines, generators, and other balance of plant systems. Conduct feasibility studies for proposed designs and assess costs and benefits for alternatives in a systematic and thorough manner. Preparation and review of reports. Work collaboratively with other disciplines to execute project deliverables, as well as ensure that quality objectives, schedules, and budgets are met. Edit and prepare design specifications. Contribute to the development of the hydro-mechanical practice at KGS by assisting the US mechanical design lead by documenting technical knowledge, improving internal production processes, coordinating and developing internal training content, and other tasks. Perform other duties as assigned. About You To fill the role, we're looking for an applicant to bring forward a good mix of qualifications and previous experiences. Some highlights should include: Minimum of a Bachelor of Science (BS) in Mechanical Engineering from an ABET accredited university. A post-graduate degree would be an asset. Minimum of 7-15 years of experience in mechanical engineering. Must be registered as a Professional Engineer (P.E.) in Washington, Oregon, or California, as well as eligible for registration as a professional engineer in other states by comity through NCEES; or, if not already registered as a PE, would be able to obtain licensure within 1 year from date of hire. Previous consulting experience is preferred, but not required. Excellent verbal and written communication skills are required. Must be self-motivated, and able to work independently with minimal supervision and manage several projects simultaneously. Travel to project sites is usually limited but will be required at times depending on project/client requirements. The amount of travel time desired by our employees can usually be accommodated. Must possess a valid driver's license and the ability/willingness to undergo security clearance checks. Client interaction: must be able to effectively assume a lead role as project engineer at project meetings and communicate project and technical information. Demonstrated experience in site investigations, condition assessments, design, and construction support are preferred. The salary range for this position is $110,000-$160,000 Please note that the salary range mentioned in this job description should serve simply as a guide. The final compensation offered may vary based on a variety of factors, including candidate's experience, skills, and location. KGS Group is committed to providing a fair, equitable, and competitive package that reflects the value an individual brings to the organization. KGS Group is an employee-owned equal opportunity company offering an excellent compensation and benefits package. KGS Group welcomes and encourages applications from people with disabilities. Upon request, KGS Group will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process. *Please help us learn more about you, your professional goals, and why this job is a good fit for you by submitting a cover letter along with your resume. We highly encourage all applicants to provide a cover letter.*

Job Responsibilities: The Project Engineer at FLINT supports the Project Manager and Project Superintendent to facilitate a well-managed project. The Project Engineer assists with the overall management and administration of projects including pre-construction services, estimating, subcontractor management, RFIs, submittal process, CORs, and SCOs. Responsibilities include: Drafting and reviewing subcontracts and purchase orders Thoroughly reviewing project documents and familiarizing with project participants Representing the company in project meetings Determining submittal requirements and maintaining the submittal log Assisting in developing and maintaining project schedules Conducting regular site visits to ensure proper construction and adherence to schedule Administering As-Built drawings Handling project correspondence and documentation Obtaining necessary permits and ensuring timely receipt of record documents Assisting in administering the Punch List Performing additional duties as assigned Job Requirements, Qualifications, Characteristics: FLINT is seeking an experienced Project Engineer with 1+ years of experience to perform project management functions on small projects ( Good grasp of construction terminology and activities Understanding of all trades including MEP and building permit process Ability to estimate CORs, assist in bidding, and assemble project estimates Familiarity with cost control and management processes Basic understanding of prime contract types and delivery methods Proficiency in project documentation, scheduling, safety practices, and technology tools (Fieldview, Viewpoint, Team VPT1, Bluebeam, Pype, GCPay, P6, and Vista) Skills in business development and maintaining customer relations Understanding of fee enhancement, risk mitigation, and client management Ability to mentor team members and promote teamwork and cooperation

Before applying for this job, please read description in its entirety and if you are qualified and interested, follow the directions below on how to apply. This position is located in Roseville, CA. No relocation package is provided for non-local candidates. Harris & Bruno International is looking for a Manufacturing Engineer to work in a high pace manufacturing environment. This individual will be expected to: Carry out process improvement, problem resolution, project management and employee training. Improve manufacturing processes and methods for cost reduction, quality improvement and efficiency. Prepare and present plans and coordinate deployment including training of team. Designs, develops, and tests and/or sources and cost-justify various tools, machinery and equipment for recommended manufacturing methods. Assist in improving production control, standard operating procedures, safety, quality control and training. Perform research, design, and development of manufacturing processes including production flow, assembly methods and production equipment. Prepare and maintain detailed layouts of building and equipment. Coordinate the manufacturing launch of new/revised products including establishing goals, training team members and evaluating results. Perform product/process analysis for cost reduction, quality improvement, and improved efficiency. Represent manufacturing on cross functional teams. Maintain product and company reputation by complying with government regulations. Benefits Package Includes: Medical Dental Voluntary Vision Company provided life insurance with the option of additional voluntary life insurance. 401k with employer match. Robust PTO policy beginning with 3 weeks earned the first year. Paid holidays. Knowledge/Skills: Technical Capacity. Proficient at problem solving and analysis. Leadership. Communication proficiency. Education/Experience: Bachelor degree in Engineering required. 3 or more years' experience as a Manufacturing Engineer. Experience with 3-D Modeling Harris & Bruno International is a stable company that has been in business since 1948. We are experiencing regular, steady growth in our core and developing product lines. We enjoy a strong presence in the rapidly expanding commercial printing market supporting customers who package products that you use every day.

The Truckee area Project Engineer is responsible for ensuring administrative, contractual, financial and technical aspects of the assigned project(s) being executed. Project Engineer will be reporting to the Project Manager and/or Superintendent. Job Responsibilities includes (but may not be limited to): Assists Project Manager and Superintendent in the management of construction projects, which involves cost control, expediting, quantity take-off, scheduling and safety. Develop peer constructability review of design documents. Develop, input and update project schedule as directed. Assist with the coordination, development and accuracy of the project estimate, budget, revisions, cost coding, and prepare cash flow charts. Analyze changes to contract documents, i.e. Owner Change Order Requests (CORs), Subcontractor Change Orders (SCOs). Review revised cost reports with Project Manager and assist in establishing final costs. Attend and participate in monthly job reviews. Work with Project Manager to perform a thorough and objective bid analysis using all applicable components. Prepare subcontractor Schedule of Values and monthly owner billings with Project Manager and Project Superintendent. Other duties upon request. Qualifications: 3 years of experience as a Project Engineer in commercial construction industry. Bachelor's degree in Construction Management of Engineering or related field. Proficient computer skills in Microsoft Office Suite, Project Management software (Viewpoint or similar) and Scheduling software (Primavera or similar). Apply a complete and proficient understanding of construction management, engineering, safety, scheduling, estimating, budgets, costing and procurement. Analyzing and interpreting data. Effective verbal and written communication skills. Multi-tasking in a fast paced environment. Strong leadership, detail oriented, problem solving, initiative and teamwork. Proven ability to fulfill project development to project closeout responsibilities Working Conditions: Duties required physical abilities such as repetitive hand/finger motions, arm extensions, sitting, standing, and walking jobsites that include uneven and changing site conditions. As well as climbing stairs and ladders, etc. The individual is required to occasionally move around the office and constantly operate a computer and other office machinery, etc. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. Level 10 Construction is an Equal Opportunity Employer M/F/Disability/Veterans. All applicants applying must be authorized to work in the United States.

Purpose: The Project Engineer (PE) works with our team of other Engineers, Sales, and field staff to support Maxim's fleet of rental equipment. The PE will assess project lifting requirements and develop accurate technical drawings and supporting documentation for equipment installations and lift plans. The PE's responsibilities include the gathering information needed to produce detailed drawings and specifications, calculate crane and rigging requirements, as well as evaluate the feasibility and details for effective tower crane and hoist installations. Key Duties and Responsibilities: Reviews project drawings and plans to verify designs, perform calculations, and use modeling methods to ensure correct results. Develops crane layout and rigging details for crane lifts in private, commercial, and industrial settings. Liaises with Architects, Engineers, contractors, and Maxim team members to gather product information and to establish the job requirements for the project. Creates and presents structural overviews for upcoming projects and develops reports that include technical details for engineers as well as big-picture analysis. Uses AutoCAD and other drafting software programs to create 2D design documents and 3D models for individual components and overall structural plans according to client needs and project requirements for deliverables. Prepares documentation for customers covering project plans and progress, and other relevant information. Prepares ground bearing pressure calculations for track mounted and outrigger-based cranes. Perform other related duties as assigned or required. Minimum Requirements: Education: Bachelor of Science Degree in Civil or Mechanical Engineering, Naval Architecture, or other related engineering degree. EIT Certificate is preferred. Experience: 0 to 4 years of previous relevant engineering experience. Skills/Knowledge: Moderate level knowledge of applied geometry and statics. Advanced level organizational and problem-solving skills. Advanced level presentation and documentation preparation skills. Moderate level ACAD skills - 3D ACAD skills are preferred. Basic to moderate level knowledge of AISC Steel Construction Code and connection design. Basic to moderate level knowledge of structural analysis techniques. The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to walk, use hands to finger; handle or feel; and kneel; crouch; or crawl; and talk; or hear; push and/or pull; reach; climb; bend and/or stoop. Specific vision abilities required by this job include close vision, color vision, peripheral vision and depth perception. Limited travel is expected to visit project sites and observe or supervise equipment installations. Maxim is an equal opportunity employer and does not discriminate against employees or applicants for employment based on their race, color, religion, creed, sex, national origin or ancestry, age, sexual orientation, disability, genetic information or veteran status, as those terms are defined under applicable laws, or any other characteristic protected by law.

The Project Engineer will oversee engineering projects from conception to completion, ensuring that they are completed on time, within budget, and to the required quality standards. This role involves collaboration with various stakeholders, management of resources, and the implementation of engineering design principles to achieve project objectives. Key Responsibilities Manage engineering projects, ensuring adherence to timelines and budgets. Develop and review engineering designs and technical documentation. Utilize CAD software to create and modify engineering plans and drawings. Collaborate with project teams and stakeholders to facilitate effective communication and project execution. Conduct risk management assessments and implement mitigation strategies. Monitor construction processes and ensure compliance with quality assurance standards. Prepare project schedules and track progress against milestones. Facilitate problem-solving sessions to address project challenges and obstacles. Provide regular updates to stakeholders on project status and developments. Assist in budgeting and resource allocation for engineering projects. Qualifications Bachelor's degree in Engineering or related field. Proven experience as a Project Engineer or similar role. Strong knowledge of engineering design principles and practices. Proficiency in CAD software and technical documentation. Experience in budgeting and scheduling for engineering projects. Excellent collaboration and stakeholder communication skills. Strong problem-solving abilities and risk management experience. Knowledge of construction management practices and quality assurance processes. Benefits OUR TRAINING PROGRAMS Cost estimating utilizing the latest software from Accubid Lighting design, photometry, and Title 24 compliance Power distribution and system architecture Basic procurement Field installation techniques Pre-fabrication design and implementation Our Benefits Medical, dental, and vision care Profit sharing/Company matching 401k Program Paid vacation/sick leave Fully paid life insurance policy Email Your Resume In Word To Looking forward to receiving your resume through our website and going over the position with you. Clicking apply is the best way to apply, but you may also: keith.ellis@cybercoders.com Please do NOT change the email subject line in any way. You must keep the JobID: linkedin : KE2-1852792L519 -- in the email subject line for your application to be considered.*** Keith Ellis - Director of Recruiting For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance. This job was first posted by CyberCoders on 05/13/2025 and applications will be accepted on an ongoing basis until the position is filled or closed. CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at Benefits@CyberCoders.com to make arrangements.

Project Engineer (Construction - Concrete Subcontractor) Job Type: Full-time Pay Range (Annualized): $60,000 - $90,000 per year. About the Role We are a concrete subcontractor seeking a Project Engineer to support our Project Management team based in our Rancho Cordova office. This role helps keep projects organized, documented, and moving-supporting communication, implementing document controls, evaluating change order requests and submittals of shop drawings, reviewing project schedules, etc. This position is ideal for someone looking to build or continue a career in construction management. What You'll Do Develop a full understanding of the scope and interdependence of all contract documents. Handle and submit Daily job reports, RFI's, and submittals. Manage effective document control mechanisms for the project to ensure that work is performed in accordance with contract documents. Evaluate change order requests including design changes, specifications and drawing releases and reports status. Evaluate submittals of shop drawings, material data and samples and take appropriate action based upon contract specifications. Review the project schedule and assist the project manager in the maintenance of it as requested. Assist the project manager in the maintenance of effective cost control mechanisms for the project. Complete project close out requirements in accordance with contract documents. Administer quality control program as outlined in the project procedures manual. Become familiar with safety requirements of the project and monitors compliance. Utilize safe work practices and follow directives, policies, and procedures for assisting and maintaining a healthy and safe work environment. Execute additional duties and responsibilities as assigned. What We're Looking For Ability to prioritize multiple tasks and adapt to changing requirements and priorities. A self-motivated and proactive team player. An organized and detail oriented individual. An skilled communicator who can interact effectively and professionally with all levels of employees, management, vendors, clients, and others. A dedicated team member who is comfortable with traveling, working on active jobsites, and who can work extended hours when required by project schedules or urgent circumstances. Qualifications 1-3 years construction experience. Ability to use a computer. Proficient with Microsoft 365 (Outlook, Word, Excel, etc.) and Bluebeam (or equivalent). Proficiency with PlanGrid or Procore are a plus. High School Diploma/GED required; Construction Management degree preferred Work Environment & Schedule The position reports on-site to an office located in Rancho Cordova, CA. The position requires travel to active construction jobsites as needed or required. Typical office hours are Monday - Friday, 8:00 - 5:00. The working schedule may vary by project needs. The company has an engaging culture and periodically attends or hosts events, on and off site. Benefits Medical, Dental, Vision, and Life Insurance. Employee Assistance Program. Profit Sharing & 401(K) Program. Discretionary Bonus Program. Paid Sick Leave (5 days per year) Paid Vacation Leave (starts at 2 weeks/year) Paid Holidays (9 days per year) Paid Volunteer Day Paid Bereavement Leave Equal Opportunity We are an Equal Opportunity Employer and consider applicants without regard to race, color, religion, sex, gender identity/expression, sexual orientation, national origin, age, disability, veteran status, or any other protected status. Reasonable accommodations are available for qualified individuals with disabilities.

Imagine what you could do here. At Apple, new ideas have a way of becoming extraordinary products, services, and customer experiences very quickly. Bring passion and dedication to your job and there's no telling what you could accomplish! The people here at Apple don't just create products - they create the kind of wonder that's revolutionized entire industries. It's the diversity of those people and their ideas that inspires the innovation that runs through everything we do, from amazing technology to industry-leading environmental efforts. The WW AppleCare Logistics team is a highly motivated, fast-paced, dynamic organization that is responsible for Apple's reverse logistics service operation. The team supports a number of Distribution Centers and 3PL (third party logistics) partners in multiple countries across the globe who deliver industry-leading service to our customers. We are seeking an Industrial/Manufacturing Engineer who will develop, implement and maintain methods, operation sequence and processes for a high volume reverse logistics, mail-in repair, and screening operations. In this role, we will collaborate with various AppleCare teams to coordinate processes and procedures for new and existing products. You'll estimate logistics process cost and impacts to existing process. You will determine time standards, HC requirements and recommendations for tooling, equipment and process requirements for new or existing product/process lines. You'll maintain records and reporting for logistics and screening operations and monitor quality and performance attainment by OEM or 3PL partners. You will coordinate with the service center team to understand issues/impacts and recommend the best course of action. - Authority on warehouse reverse logistics and screening processes for global and regional project implementation. - Responsible for New Product/Process Implementations. - We ensure all products and processes comply with Apple specifications. - Understanding of relevant SAP processes. - Develops and analyzes process costs. - Performs capacity planning and analysis for new and existing processes. - Implements process improvements. - Manages small projects and coordinates cross-functional teams to resolve complex issues and implement change. - Partners with external vendors/companies for equipment, tooling and packaging sourcing. - Provides support to internal customers. - Main point of contact for regional partners for engineering/process issues. Masters degree in Industrial Engineering Experience with 3D factory modelling and visualization software (Factory CAD, Line Designer, Factory Design Suite ) Good interpersonal, teamwork, presentation and communication skills Strong project management skills and the ability to work to tight project deadlines Deep understanding of supply chain, logistics, and eCommerce operations. Be comfortable working with a high level of ambiguity and delivering results in an unstructured environment. Can prioritize strategic objectives which optimize for speed, cost, and environmental impact while also achieving high-value tactical outcomes. Analytical approach and ability to use data effectively to size, prioritize, and stitch business elements to influence through effective storytelling. Experience with production line layouts and evaluation of new tools Experience working in a global operation Experience with predetermined time standards such as MODAPTS, MOST or MTM Modeling and evaluating discrete process simulations Experience with Design for Logistics operations including assembly/manufacturing Experience with Lean Manufacturing Exposure to ergonomic validations Ability to run basic models in discrete event simulation softwares (FlexSIM and PlantSIM) Experience maintaining product process flow, layout and parameters Experience implementing lean principles to various factory related processes 7+ years experience working as a Industrial/Manufacturing Engineer in a high volume electronics manufacturing/repair operation Bachelors degree in Industrial, Manufacturing, or Mechanical Engineering. Ability to travel domestically/internationally (~10% of time).

Performs a variety of engineering duties to support manufacturing operations. Improves products, processes and applications to meet agreed-upon objectives. May redesign products to meet cost objectives, obsolescence and customer requirements. Participates actively in new product introduction, including influencing the design of the product and/or process to ensure manufacturability and conformance with the global supply chain, enabling prototyping while in the R&D lab, testing the reliability of prototypes, scale-up, and managing the transition into production. Supports and implements the transition of products and manufacturing processes from prototype to full production and through the entire life cycle of the product. In a process environment, interfaces with the chemical development lab and production to ensure small-scale development activities will scale to manufacturing equipment and systems. Coordinates the revision of standard operating procedures (SOPs) as required to support the transfer. Partners with procurement, external vendors and customers to improve/sustain products and processes to meet production timelines, quality policies, and customer expectations. Utilizes digital solutions to optimize and maintain state of the art manufacturing processes. May direct the work of third-party vendors and/or partners to meet contract specified deliverables, performance or business objectives. May work with suppliers to ensure achievement of goals for cost, quality and delivery of parts and materials. May identify and manage ERP data such as bill of material and routing. May be responsible for designing, developing and enhancing microarray fabrication devices/equipment, processes and handling systems. May be responsible for scripting software code used in manufacturing tests or to program an instrument used for production of a product. May be required to use continuous improvement methodologies and understand quality regulations related to the life science industry. May be responsible for one or more of the following roles:Materials engineer: Applies knowledge of materials science to collaborate with and provide consulting to R&D, procurement and manufacturing engineering in the research, specification, sourcing and qualification of materials used in the design and production of Agilent products. Plans, evaluates and recommends technical, quality and cost specifications to meet design and business growth objectives and supply chain optimization. Identifies and qualifies alternative materials when needed. Work with suppliers to clarify specifications to meet quality, cost and manufacturability goals. Fabrication manufacturing engineer: Designs, develops and enhances microarray fabrication devices/equipment, processes and handling systems. Monitors fabrication processes for consistency in yield performance and machine uptime and establishes clear guidelines for equipment operating limits. Modifies processes and equipment as needed to improve control, quality, production output and machine uptime. Works with R&D to design, develop and release new tools or process technologies and is a resource for risk assessments and design for manufacturability. Analyzes automated tool and QC data to determine root cause of production or quality issues. Manufacturing machine controls software engineer: Provides software solutions in manufacturing fabrication environment. Designs and maintains software code for operating systems or applications for operating automated manufacturing equipment or devices to enable high-throughput, high-quality production of company products. Resolves issues to ensure uninterrupted demand fulfillment. Manufacturing data management and analytics engineer: Defines, develops, improves, supports and implements in house and commercial software solutions to support the manufacturing of products in a cost-effective and compliant manner. Participates in the definition of processes and solutions to provide software-based support for manufacturing operations. Supports and implements the transition of software solutions from requirements to full production through the entire life cycle of the software use. Provides and supports an infrastructure to run the software needed for manufacturing. Defines and recommends appropriate software solutions for manufacturing scenarios. Performs validations and associated activities for all software and technical based solutions. Develops and delivers reporting, analytics and database solutions. Qualifications Bachelor's or Master's Degree or equivalent. Post-graduate, certification and/or license may be required. 4+ years relevant experience for entry into this level. Additional Details This job has a full time weekly schedule. Applications for this job will be accepted until at least January 20, 2026 or until the job is no longer posted.The full-time equivalent pay range for this position is $110,424.00 - $172,538.00/yr plus eligibility for bonus, stock and benefits. Our pay ranges are determined by role, level, and location. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. During the hiring process, a recruiter can share more about the specific pay range for a preferred location. Pay and benefit information by country are available at: ************************************* Agilent Technologies, Inc. is an Equal Employment Opportunity and merit-based employer that values individuals of all backgrounds at all levels. All individuals, regardless of personal characteristics, are encouraged to apply. All qualified applicants will receive consideration for employment without regard to sex, pregnancy, race, religion or religious creed, color, gender, gender identity, gender expression, national origin, ancestry, physical or mental disability, medical condition, genetic information, marital status, registered domestic partner status, age, sexual orientation, military or veteran status, protected veteran status, or any other basis protected by federal, state, local law, ordinance, or regulation and will not be discriminated against on these bases. Agilent Technologies, Inc., is committed to creating and maintaining an inclusive in the workplace where everyone is welcome, and strives to support candidates with disabilities. If you have a disability and need assistance with any part of the application or interview process or have questions about workplace accessibility, please email job_******************* or contact ***************. For more information about equal employment opportunity protections, please visit *************************************** Required: OccasionalShift: DayDuration: No End DateJob Function: Manufacturing

The Intern will engage with the Manufacturing Engineering team to optimize the manufacturing process. The Intern will assist with data collection and analysis of tool data, generate reports, and support continuous improvement projects (CIP). ESSENTIAL JOB FUNCTIONS Support the Manufacturing Engineering team in the design and implementation of new manufacturing processes. Assist with the development and maintenance of manufacturing process documentation, maintenance instructions, and manuals. Participate in continuous improvement initiatives to boost the efficiency and quality of our manufacturing operations. Assist in conducting data analysis and developing recommendations for process improvement. Observe and document manufacturing processes, for example, the Hot stamping setup. Participate in cross-functional projects and provide support as needed. Perform engineering change processes as necessary to support existing products Conducts observations and documents the process of different types of mold changes on injection molding machines. Create video files of the setup processes. Maintains reliable and consistent attendance, including being punctual, dependable, and flexible to potential schedule changes to meet the needs of the department and the organization. Executes each essential duty satisfactorily to perform job successfully. Follows all safety procedures required in work area, wears PPE as needed, attends all safety meetings, and reports safety issues regarding equipment or unsafe/hazardous conditions. Performs effectively as a team member, able to work well with others, open to receiving and giving feedback, and treats everyone with respect. Takes ownership of own work and behavior, accepts accountability for own actions, encourages solutions, and communicates status of work/projects. Follows all department quality standards/criteria. Raises concerns and issues to management. Understands department's key performance indicators (KPIs) and contributes to achieve these goals both individually and as a team. Other duties as needed or required. ADDITIONAL RESPONSIBILITIES Must be able to work overtime as needed, remain flexible and open to possible schedule changes in order to meet business needs. REQUIRED QUALIFICATIONS The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Junior or Senior pursuing a Bachelor of Science degree in Mechanical, Manufacturing, Automation, or Industrial Engineering or verifiable experience and vocational training in automation applications. Coursework and/or knowledge of statistics and tooling design (SolidWorks a plus). Ability to read and prepare technical documentation. Mechanical aptitude and willingness to learn. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Proficient in Microsoft Office Suite PREFERRED QUALIFICATIONS 2D or 3D drawing capability for automated equipment design on AutoCAD or SolidWorks Basic knowledge and understanding of most industrial codes required (ANSI, ADA, OSHA, NEC, NFPA, IBC, ISO, DIN) Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sitting, walking, standing, bending at the neck, bending at the waist, squatting, climbing, kneeling, twisting at the neck and waist, repetitive use of hands, simple grasping, power grasping, fine manipulation, pushing and pulling, reaching above and below the shoulder, carrying/lifting up to 50 lbs. Working around equipment and machinery Exposure to excessive noise Exposure to dust, gas, fumes or chemicals Working at heights Use of special visual or auditory protective equipment Operation of foot controls or repetitive foot movement PPE Requirements Safety glasses Utility gloves Leather top, slip-resistant shoes, safety-toe shoes Currently, Cambro does not provide sponsorship for employment visas (e.g., F-1, H-1B) and will not offer such sponsorship in the future. Applicants must already have full-time work authorization in the United States without requiring sponsorship. Intern COMPENSATION RANGE: $18.04 - $25.00 Salary may vary based on experience. CAMBRO is proud to be an equal-opportunity workplace. All qualified applicants will receive consideration for employment without regard to and will not be discriminated against based upon race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic information, military or veteran status, or other characteristics protected by law.

Chemical Engineer About the Job Thatcher Company is seeking a Process Engineer to join our engineering team in Sacramento, California. In this role, you will provide process engineering and technical support to plant operations, capital projects, and other teams. You will work closely with operations and the business team to identify process improvement opportunities, implement plant improvement projects, and drive innovative solutions. What You Will Do Promote understanding and application of safety practices. Optimize plant production and efficiency by the implementation of improvement opportunities and management of process constraints. Work with operations and manufacturing experts to resolve technical issues. Develop and maintain process documentation and safety information such as P&IDs, material balances, equipment datasheets, process line sizing calculations, hydraulic calculations and datasheets for instruments and relief devices. Contribute to process safety and environmental performance through participation in process hazards analysis (PHA), management of changes (MOC), and incident investigation. Manage small capital projects from design through startup. Qualifications Basic Qualifications Bachelor's degree in chemical engineering with 5+ years of experience in a process facility. Travel =< 20% What Will Put You Ahead Experience in process controls, project management, or process safety management. Experience with AutoCAD LT, AFT Fathom, or SolidWorks. Experience in process industry/manufacturing. Why Thatcher is right for you Competitive salary $100-125K annualized 100% company-funded Profit-Sharing Plan (up to 25% of salary annually) 401(k) with traditional and Roth contribution options Comprehensive benefits: medical, dental, vision, life insurance, short- and long-term disability, HSA/FSA, 3+ weeks of PTO, and paid holidays Education reimbursement and ongoing professional development. The pay for the successful candidate will depend on various factors (e.g., qualifications, education, prior experience). Applications will be accepted while this position is posted on our Careers website. Thatcher is an Equal Opportunity/Affirmative Action employer, including protected Veterans and individuals with disabilities.

About Us: BW Design Group is a fully integrated architecture, engineering, construction, system integration, and consulting firm committed to helping our clients realize their most critical goals from Strategy to Commercialization. As the only firm born from a manufacturing technology company to become an independent and fully integrated firm, we combine deep domain expertise in the manufacturing environment with an approach that is built to serve the dynamic needs of our clients. Rooted in our distinct culture of Truly Human Leadership, we cultivate the leaders who will define tomorrow and partner with our clients in the food & beverage, life sciences, industrial, and advanced technology industries to build the future of manufacturing and technology. Barry-Wehmiller is a diversified global supplier of engineering consulting and manufacturing technology for the packaging, corrugating, sheeting and paper-converting industries. By blending people-centric leadership with disciplined operational strategies and purpose-driven growth, Barry-Wehmiller has become a $3 billion organization with nearly 12,000 team members united by a common belief: to use the power of business to build a better world. Job Description: Who You'll Work With You will join one of our 45 offices in the US, be part of a committed team of over 1500 professionals, and work in teams and directly with our clients doing work that is shaping the world around us. You will be welcomed into a rapidly growing business and team and empowered to make an impact. You will be valued, cared for, and challenged on your path to becoming a world-class professional consultant and surrounded by leaders who are committed to creating an environment that enables you to realize your own success and fulfillment. When you join Design Group as a Process Engineer, you are joining a team that will challenge you and position you for growth. In this role, you will work with a team of industry experts to help the world's leading companies solve their most difficult problems. You will join our Architecture/Engineering Process Practice and partner with seasoned leaders, technical specialists, and subject matter experts to deliver the highest quality solutions to our clients with consistency and accuracy. What You'll Do You'll work individually and in teams to support capital projects and implement solutions for our clients. Together, you will help our clients make critical changes to improve their performance and realize their most important goals. Assume responsibility for process mechanical design, process equipment and installation specifications, vendor and contractor management, and installation and start-up support Maintain and grow solid client relationships Develop process flow diagrams and process & instrument diagrams (P&IDs) Create specifications for process equipment procurement and installation Create basic piping system design, pump sizing calculations, mass & energy balance calculations, and functional & installation specifications Manage project documentation Lead project teams and coordinate with multidisciplinary project teams Supervise designers and junior level engineers Handle equipment procurement and develop material handling methods Manage vendors and contractors Provide installation and start-up support Troubleshoot equipment problems What You'll Bring A minimum of five years of industrial project engineering experience involving process and related automation applications Experience in the food, dairy, beverage/brewery, or personal care industries (preferred) Strong analytical skills and a basic understanding of project management fundamentals Proficiency in Microsoft Office, Microsoft Project, and Revit Effective organizational, communication, and interpersonal skills A solid understanding of process flow diagrams, piping & instrument diagrams, mass & heat balances, basic piping system design, pump sizing, material handling methods, equipment, functional & installation specifications, and process instrumentation & control principles A practical understanding of sanitary design and construction methods, and process electrical/control and instrumentation design integration (preferred) The ability to work with minimal supervision A willingness to travel for project requirements including installation and start-up activities, client and company sponsored meetings, trainings, industry related seminars, forums, and conventions A bachelor of science in mechanical or chemical engineering, or a similar engineering degree with applicable project experience Our culture and commitment to our people is what sets us apart. We foster an environment of mutual respect, integrity, and unconditional interest in the individual and collective success of our professionals. Our model and entrepreneurial mindset offer a rewarding, challenging, and highly flexible path. As a Process Engineer, you will build a meaningful and fulfilling career with the support of professional development resources and mentorships including our First Year Experience program, Individual Development Plans, and Career Path resources and tools. You will be surrounded by exceptional talent who will support your development as both a world-class engineer and a highly effective leader. Feel like you're on the path to becoming a Process Engineer but you're not quite there yet? We'd love to connect with you to see if we can take you from where you are today and grow you into a Design Group Engineering Consultant. The approximate pay range for this position is $80,000-$110,00. Please note that the pay range provided is a good faith estimate for the position at the time of posting. Final compensation may vary based on factors including but not limited to background, knowledge, skills, and abilities as well as geographic location of the position. #LI-TT At Barry-Wehmiller we recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please still consider applying. We know that our differences often can bring about innovation, excellence and meaningful work-therefore, people from all backgrounds are encouraged to apply to our positions. Please let us know if you require reasonable accommodations during the interview process. Barry-Wehmiller is an equal opportunity employer. M/F/D/V This organization uses E-Verify. Applicants may be subject to pre-employment screening which may include drug screening, reference checks, employment verifications, background screening and/or skills assessments. Company: Design Group

ABOUT APPLIED AEROSPACE: Join the team that builds for the best. At Applied Aerospace, we design, fabricate, and test mission-critical aerospace components for leading innovators like SpaceX, NASA, Northrop Grumman, and Boeing. Every part we create reflects our relentless commitment to quality, reliability, and performance. Through precision engineering and purpose-driven innovation, we're helping take aerospace technology to new heights - and we're looking for talented individuals who want to be part of that journey. OVERVIEW OF POSITION: The Manufacturing Engineer will be responsible for overseeing the fabrication of hardware and tooling in accordance with customer specifications and quality requirements. The ideal candidate will possess an engineering degree in either aerospace, manufacturing, or mechanical engineering. Applied Aerospace employs mechanical, aerospace, and manufacturing engineers at all levels of experience from entry level to highly qualified. ESSENTIAL JOB FUNCTIONS: * Generating Assembly Manufacturing Instruction Documentation (MID) and reviewing with Program Manager and Quality Engineer for approval. * Working with the Production Coordinators to ensure that production schedules are maintained, materials are available to support the schedules. * Working with Operations to ensure that production schedules are maintained. * Identifying to the Program Manager any resource requirements needed to complete projects on time and within budget. * Direct customer communications as needed including teleconferences, Manufacturing Readiness Reviews (MRR's), customer visits, etc. * Support for Bids and Proposals, including labor and material estimates. * Properly setting up a project in the Manufacturing Computer System. This includes Part Number Maintenance (et.al.) and accurate Bills of Materials). * Generating all project Requests to Purchase (RTP's) (or review and approve Manufacturing Resources Planning (MRP-generated Buy Reports). This includes routing RTP's for approval through Quality, PC, PM, and Purchasing. * Generating and maintaining "piece-part" routers for simple parts (i.e. clean/prime, machined parts, etc.) * Follow all safety protocols, guidelines, and regulations. GENERAL: * Bachelor's degree in engineering, with a focus in aerospace, mechanical, or manufacturing. * Associate level requires a bachelor's degree in engineering. * General level requires a bachelor's degree in engineering plus 5+ years' experience. * Senior level requires a bachelor's degree in engineering plus 10+ years' experience. * Excellent technical writing and documentation skills. * Familiarity with environmental regulations and best practices, including hazardous materials, hazardous waste management, air quality, and water quality. * Strong analytical and problem-solving abilities. * Effective communication and interpersonal skills to collaborate with internal teams, contractors, and vendors. * Detail-oriented with a commitment to accuracy and quality. * Strong hands-on experience with composites. * Experience in a manufacturing environment. This job description is not intended to be all-inclusive. Employees may perform other related duties as assigned to meet the ongoing needs of the Company. Applied Aerospace is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics. Applied Aerospace is committed to working with and providing reasonable accommodation to individuals with disabilities or individuals who may need religious or medical accommodation. If you need accommodation because of a disability, medical, or religious reason for any part of the employment process you can notify the Human Resources Department, and your request will be reviewed.

We're Watts. Together, we're reimagining the future of water. We feel proud every day about what we do. We're all part of the same crucial mission, no matter what function we support -- it's to provide safe, clean water for the world, and to protect our planet's most valuable resource. What we do: For 150 years, Watts has built best-in-class products that are trusted by customers in residential and commercial settings across the world. We are at the forefront of innovation, working with cutting-edge technology to provide smart and connected, sustainable water solutions for the future. Watts is a leading brand with a quality reputation - and we have a dynamic future ahead. The Watts Internship Program is your chance to bring what you've learned in the classroom to life! You'll dive into real-world projects, gaining hands-on experience while learning how business really works from the inside. During the program, you'll get to roll up your sleeves and make an impact on day-to-day operations. Plus, you'll have tons of opportunities to network with passionate professionals across manufacturing, industrial engineering, and more-sparking new ideas through cross-department collaboration. It's all about expanding your skills, challenging yourself, and exploring where your ambitions can take you! Watts is seeking an innovative Manufacturing Engineering Intern to join our operations team. As an intern, you will identify and implement shop floor process improvements aimed at increasing efficiency, reducing costs, and enhancing overall production output. This role provides an excellent opportunity to work hands-on with cross-functional teams and make a tangible impact on manufacturing processes. Reporting to the Manufacturing Engineer Manager and Continuous Improvement Manager, this position is located onsite in Woodland, CA. What You'll Do Help create and maintain shop floor work instructions including specifications, engineering changes, /process control, and tooling definition/requirements. Participate in lean manufacturing initiatives that support continuous process improvement. Significant interaction with the hourly work force, quality, safety, sourcing and other functions on projects. Scope, plan and execute manufacturing engineering requests issued internally. Including improving manufacturing efficiencies, implementation of engineering changes, improving product quality, and supporting production line with technical issues to be executed with the guidance of the Manufacturing Engineering team. Provide analysis and documentation on various processes currently in place. Who You Are Current sophomore or junior pursuing a bachelor's or master's in Manufacturing, Mechanical, or Industrial engineering. Knowledgeable of Lean principles and understanding of different quality standards like six-sigma a plus. Ability to present complex data effectively. through charts/tables/graphs/pivot tables . Ability to work autonomously with little instruction and supervision. Ability to communicate with colleagues throughout all departments and levels of the organization professionally and effectively. Passionate about your work, with a genuine desire to contribute meaningfully and make an impact. Demonstrated commitment to integrity and respect in interactions with others, fostering a positive and inclusive work environment. Strong sense of accountability, taking ownership of tasks and following through on commitments. Must be authorized to work in the United States and do not require sponsorship now or in the future. What's In It for You People-First Culture - Enriching and caring for people is at the core of who we are; this includes executing our Diversity, Equity, and Inclusion (DEI) strategy, and providing you with meaningful career growth opportunities, a positive and safe work environment, and affirmation that you are heard, valued, and respected. Flexible PTO Policy - Work-life balance is important at Watts and our interns receive one (1) hour of flexible PTO for every thirty (30) hours worked. Your flexible PTO can be utilized for any type of absence. Paid Holidays - Celebrate the holidays with your loved ones and still get paid! You will receive the following paid holidays off during your time as an Intern with Watts. Where a holiday falls during the weekend, it will be observed on an adjacent weekday. Lunch and Learns - Throughout your internship, there will be opportunities for you to sign up to learn and network with some of the key strategic leaders and thought partners within our core operating model! Sustainability - For five years in a row, Watts has been named one of "America's Most Responsible Companies" by Newsweek. Join our journey as we continue to distinguish Watts as a responsible and committed corporate citizen. Compensation: The expected hourly range for this position is $24.00 - $30.00 per hour. Actual compensation will be dependent upon individual skills, experience, qualifications, and applicable laws. Working Conditions Work in both office and manufacturing environment. May occasionally be required to perform job duties outside the typical office setting. *Physical Requirements While performing the duties, the employee will be working in an office and manufacturing environment. The employee is required to sit, stand, walk, and use hands to handle objects and other tools. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. The Employee may be required to lift, push, and/or pull up to 25 pounds. *As required by the Americans Disabilities Act (ADA) EMPLOYEE CORE COMPETENCIES: 1. Collaborate Across Workgroup 2. Initiate Positive Change 3. Deliver High Quality Results 4. Focus on the Customer 5. Develops Self & Others 6. Accountability Watts in it for you: Please note that the following benefits apply only to permanent roles and do not apply to internship roles. Competitive compensation based on your skills, qualifications and experience Comprehensive medical and dental coverage, retirement benefits Family building benefits, including paid maternity/paternity leave 10 paid holidays and Paid Time Off Continued professional development opportunities and educational reimbursement Additional perks such as fitness reimbursements and employee discount programs Learn more about our benefit offerings here: ********************************* How we work: At Watts, our culture is team-oriented and supportive. Employees here genuinely care about the quality of their work, and about each other. Our people are the heart of who we are and contribute to our longevity and continued success. And this is a place where you can have a big career. No matter your role, there are opportunities for learning and development, and your daily contributions make a meaningful impact on the lives of people who use our products and on the future of water. Watts is committed to equal employment opportunity. We follow a policy of administering all employment decisions and personnel actions without regard to race, color, religion, creed, sex, pregnancy, national origin, sexual orientation, age, physical or mental disability, genetic disposition or carrier status, marital status, military or veteran status, minorities, or any other category protected under applicable federal, state, or local law. Consistent with the obligations of state and federal law, Watts will make reasonable accommodations for qualified individuals with disabilities. Any employee who needs a reasonable accommodation should contact Human Resources.

Donaldson is committed to solving the world's most complex filtration challenges. Together, we make cool things. As an established technology and innovation leader, we are continuously evolving to meet the filtration needs of our changing world. Join a culture of collaboration and innovation that matters and a chance to learn, effect change, and make meaningful contributions at work and in communities. The Manufacturing Engineer II position is located in Dixon, IL. This position participates in and contributes to process and product modifications, standards, and improvements. The Engineer II position utilizes knowledge of manufacturing equipment and processes to develop expertise in increasing product quality, output, and cost effectiveness. You will utilize lean tools and thinking in improving value streams, conduct workflow analysis, and lead process improvement and change within the organization. Qualified candidates must be able to work an on-site schedule at our Dixon, IL facility. Role Responsibilities: * Supports the appraisal of new product ideas to determine their potential to address customer needs and to achieve goals in revenue growth and market share. * Designs, analyzes, tests, and integrates components to produce final designs; and evaluates the design's overall effectiveness, cost, reliability, and safety. * Develops, executes, and evaluates fitness for use testing, product specifications, and process validation plans. * Works in cross-functional teams and is responsible for all phases of assigned standard engineering projects, ensuring the successful conclusion of all phases within an appropriate time and at an appropriate cost. * Prepares or secures and reviews cost estimates, completes required cost and equipment information, and writes appropriation requests. * Provides input on technical program objectives and product specifications to meet manufacturing needs. Keeps informed of new or improved designs, methods, and techniques, materials, and other advances in engineering technology. * Provides technical support and collaboration to manufacturing, production, and clients through customer visits and/or consultations; ensures product design meets manufacturing and/or procurement requirements. * Participates in short-range planning and technical forecasting. Prepare and present technical results and information in a clear and concise manner through drawings, specifications, reports, and oral presentations to meet Company and customer needs. * Ensures compliance with government and organization engineering standards Minimum Qualifications: * Bachelor of Science Degree in Engineering, from an accredited College or University * 3+ years of hands-on experience of industrial manufacturing or engineering Preferred Qualifications: * FAA Certification experience * Experience with Oracle or other ERP systems Annual Salary Range: $71,900 - $91,700. Actual salaries will vary based on several factors including, but not limited to applicable work experience, training, education, performance. Employee benefits are part of the competitive total rewards package that Donaldson Company, Inc. provides to you. Our comprehensive benefits program includes health benefits, retirement plan (401k), paid time away, paid leaves (including paid parental leave) and more. Relocation: This position is not eligible for relocation assistance. Immigration Sponsorship Not Available: * Applicants for this position must be currently and legally authorized to work in the United States without the need for current or future sponsorship (e.g., H-1B, J-1, F-1, CPT, OPT, etc.). * Donaldson will not offer immigration sponsorship or assume sponsorship of an employment visa for this position. * International relocation or remote work arrangements outside of the U.S. will not be considered. Key Words: Lean, Manufacturing, Engineering Equal Opportunity Employer, including Disability and Veterans Employment opportunities for positions in the United States may require use of information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States. Donaldson Company has been made aware that there are several recruiting scams that are targeting job seekers. These scams have attempted to solicit money for job applications and/or collect confidential information, Donaldson will never solicit money during the application or recruiting process. Donaldson only accepts online applications through our Careers | Donaldson Company, Inc. website and any communication from a Donaldson recruiter would be sent using a donaldson.com email address. If you have any questions about the legitimacy of an employment opportunity, please reach out to ******************************* to verify that the communication is from Donaldson. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law.

Renewable energy continues to expand and we want you to be a part of it! Nor-Cal Controls provides controls solutions for utility-scale renewable energy power plants and we are looking for an Automation Engineer II to join our talented team! As an Automation Engineer II, you will take ownership of assigned projects, with specific focus on successful commissioning. You will also be responsible for initial project design, customer reviews, design implementation, testing, and troubleshooting. This role is open to in-office, hybrid work, or remote options with a salary range of $116,000 - $130,000 annually*. Why Join Us? A workplace culture that celebrates collaboration, teamwork, and inclusivity. 401(K). Gold-level medical benefits with employee-only premiums paid at 100%. We're a lot of fun! Company activities, social Fridays, and more! What will a successful Automation Engineer accomplish in the first year? Provide excellent customer service, including same day response to customer emails or calls. Commission solar PV SCADA projects. Consistently meet Nor-Cal's Core Values. Preferred experience: Engineering B.S. degree (Automation, Controls, Computer Engineering, Electrical Engineering or similar), or equivalent experience. 3 - 5 years of experience designing and developing SCADA systems for utility-scale solar PV projects. Advanced knowledge of SCADA, process instrumentation, and control systems. Possesses a positive “can do” attitude and a strong motivation to learn and excel. *Salary is determined by multiple factors including relevant experience, education, place of residence (if remote), and internal parity. Nor-Cal Controls ES, Inc. has been a family-owned and operated business for over 18 years. From humble beginnings, we have grown to be the leading controls provider and systems integrator for renewable energies in the United States by adhering to our core values of Family, Dependability, Hard Work, Trust, and Knowledge. Our philosophy is simple: we take care of our clients by taking care of our employees. In addition to competitive compensation, excellent benefits, and flexible work options, we pride ourselves on having a healthy work environment that promotes diversity, collaboration, and professional growth.

NTT DATA strives to hire exceptional, innovative and passionate individuals who want to grow with us. If you want to be part of an inclusive, adaptable, and forward-thinking organization, apply now. We are currently seeking a Optical and Routing Engineer to join our team in Rancho Cordova, California (US-CA), United States (US). Position Summary NTT DATA is seeking a seasoned Optical and Routing Engineer to support our Public Sector SLED (State, Local, and Education) clients. This role requires deep technical expertise in optical networking, routed infrastructure, and fiber delivery, combined with strong program management and network engineering capabilities within complex IT environments. Key Responsibilities * Architect, implement, and maintain MPLS and DWDM networks for high-capacity, mission-critical environments. * Lead fiber delivery projects, including design, vendor coordination, installation oversight, and testing. * Manage large-scale network engineering programs, ensuring alignment with client goals, timelines, and compliance standards. * Configure and troubleshoot Cisco routed and optical platforms, including IOS-XR, NCS, ASR, and ONS platforms. * Develop and maintain network documentation, including topology diagrams, runbooks, and change management records. * Collaborate with stakeholders across engineering, operations, and procurement to ensure seamless delivery. * Provide technical leadership and mentorship to junior engineers and project teams. * Support network automation and orchestration initiatives using modern tools and frameworks. * Travel to the client site in Sacramento, CA may be required on an as-requested basis Required Qualifications * Bachelor of Science (BS) in Engineering, Computer Science, or a related technical field. * Minimum 10 years of experience with: * Multi-Protocol Label Switching (MPLS) * Dense Wave Division Multiplexing (DWDM) * Cisco routed and optical network infrastructure Preferred Skills * Proven experience in fiber delivery, including design, implementation, and troubleshooting. * Strong background in IT network engineering, including Layer 2/3 protocols, BGP, OSPF, QoS, and multicast. * Experience managing network programs in public sector or enterprise environments. * Expertise in program and project management methodologies (Agile, PMP, ITIL). * Experience with network monitoring and performance tools (SolarWinds, NetScout, Cisco Prime). * Familiarity with SDN/NFV, network automation, and orchestration platforms (Ansible, Python, REST APIs). * Knowledge of fiber optic testing tools (OTDR, power meters, light sources). * Ability to lead cross-functional teams and manage vendor relationships. * Strong analytical, documentation, and communication skills. Preferred Certifications & Training * Cisco Certified Internetwork Expert (CCIE) - Service Provider (preferred) * Cisco Certified Network Professional (CCNP) - Service Provider or Enterprise * Certified Fiber Optic Technician (CFOT) or equivalent * Project Management Professional (PMP) or Certified ScrumMaster (CSM) * CompTIA Network+, Security+, or Linux+ * Juniper Networks Certified Internet Expert (JNCIE-SP) (optional but valuable) * ITIL Foundation Certification * Training in optical network design, fiber splicing, and OTDR testing Work Environment & Travel Hybrid or on-site work depending on client requirements. Occasional travel to client sites for installation, testing, or project coordination. Why Join NTT DATA Public Sector SLED? * Work on mission-critical projects impacting public services. * Collaborate with industry-leading experts and cutting-edge technologies. * Competitive compensation, benefits, and career growth opportunities. Where required by law, NTT DATA provides a reasonable range of compensation for specific roles. The starting pay range for this role is $127,792 to $212,988. Actual compensation will depend on a number of factors, including the candidate's relevant experience, technical skills, and other qualifications. The candidate may also be eligible for incentive compensation based on personal and/or company performance. This position is eligible for company benefits including medical, dental, and vision insurance with an employer contribution, flexible spending or health savings account, life and AD&D insurance, short- and long-term disability coverage, paid time off, employee assistance, participation in a 401k program with company match, and additional voluntary or legally required benefits. About NTT DATA NTT DATA is a $30 billion business and technology services leader, serving 75% of the Fortune Global 100. We are committed to accelerating client success and positively impacting society through responsible innovation. We are one of the world's leading AI and digital infrastructure providers, with unmatched capabilities in enterprise-scale AI, cloud, security, connectivity, data centers and application services. our consulting and Industry solutions help organizations and society move confidently and sustainably into the digital future. As a Global Top Employer, we have experts in more than 50 countries. We also offer clients access to a robust ecosystem of innovation centers as well as established and start-up partners. NTT DATA is a part of NTT Group, which invests over $3 billion each year in R&D. Whenever possible, we hire locally to NTT DATA offices or client sites. This ensures we can provide timely and effective support tailored to each client's needs. While many positions offer remote or hybrid work options, these arrangements are subject to change based on client requirements. For employees near an NTT DATA office or client site, in-office attendance may be required for meetings or events, depending on business needs. At NTT DATA, we are committed to staying flexible and meeting the evolving needs of both our clients and employees. NTT DATA recruiters will never ask for payment or banking information and will only **************** ******************************* email addresses. If you are requested to provide payment or disclose banking information, please submit a contact us form, ************************************* NTT DATA endeavors to make ********************** accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please contact us at ************************************* This contact information is for accommodation requests only and cannot be used to inquire about the status of applications. NTT DATA is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. For our EEO Policy Statement, please click here. If you'd like more information on your EEO rights under the law, please click here. For Pay Transparency information, please click here.

**Req ID:** 346827 NTT DATA strives to hire exceptional, innovative and passionate individuals who want to grow with us. If you want to be part of an inclusive, adaptable, and forward-thinking organization, apply now. We are currently seeking a Optical and Routing Engineer to join our team in Rancho Cordova, California (US-CA), United States (US). **Position Summary** NTT DATA is seeking a seasoned Optical and Routing Engineer to support our Public Sector SLED (State, Local, and Education) clients. This role requires deep technical expertise in optical networking, routed infrastructure, and fiber delivery, combined with strong program management and network engineering capabilities within complex IT environments. **Key Responsibilities** + Architect, implement, and maintain MPLS and DWDM networks for high-capacity, mission-critical environments. + Lead fiber delivery projects, including design, vendor coordination, installation oversight, and testing. + Manage large-scale network engineering programs, ensuring alignment with client goals, timelines, and compliance standards. + Configure and troubleshoot Cisco routed and optical platforms, including IOS-XR, NCS, ASR, and ONS platforms. + Develop and maintain network documentation, including topology diagrams, runbooks, and change management records. + Collaborate with stakeholders across engineering, operations, and procurement to ensure seamless delivery. + Provide technical leadership and mentorship to junior engineers and project teams. + Support network automation and orchestration initiatives using modern tools and frameworks. + Travel to the client site in Sacramento, CA may be required on an as-requested basis **Required Qualifications** + Bachelor of Science (BS) in Engineering, Computer Science, or a related technical field. + Minimum 10 years of experience with: + Multi-Protocol Label Switching (MPLS) + Dense Wave Division Multiplexing (DWDM) + Cisco routed and optical network infrastructure **Preferred Skills** + Proven experience in fiber delivery, including design, implementation, and troubleshooting. + Strong background in IT network engineering, including Layer 2/3 protocols, BGP, OSPF, QoS, and multicast. + Experience managing network programs in public sector or enterprise environments. + Expertise in program and project management methodologies (Agile, PMP, ITIL). + Experience with network monitoring and performance tools (SolarWinds, NetScout, Cisco Prime). + Familiarity with SDN/NFV, network automation, and orchestration platforms (Ansible, Python, REST APIs). + Knowledge of fiber optic testing tools (OTDR, power meters, light sources). + Ability to lead cross-functional teams and manage vendor relationships. + Strong analytical, documentation, and communication skills. **Preferred Certifications & Training** + Cisco Certified Internetwork Expert (CCIE) - Service Provider (preferred) + Cisco Certified Network Professional (CCNP) - Service Provider or Enterprise + Certified Fiber Optic Technician (CFOT) or equivalent + Project Management Professional (PMP) or Certified ScrumMaster (CSM) + CompTIA Network+, Security+, or Linux+ Juniper Networks Certified Internet Expert (JNCIE-SP) (optional but valuable) + ITIL Foundation Certification + Training in optical network design, fiber splicing, and OTDR testing **Work Environment & Travel** Hybrid or on-site work depending on client requirements. Occasional travel to client sites for installation, testing, or project coordination. **Why Join NTT DATA Public Sector SLED?** + Work on mission-critical projects impacting public services. + Collaborate with industry-leading experts and cutting-edge technologies. + Competitive compensation, benefits, and career growth opportunities. Where required by law, NTT DATA provides a reasonable range of compensation for specific roles. The starting pay range for this role is $127,792 to $212,988 **.** Actual compensation will depend on a number of factors, including the candidate's relevant experience, technical skills, and other qualifications. The candidate may also be eligible for incentive compensation based on personal and/or company performance. This position is eligible for company benefits including medical, dental, and vision insurance with an employer contribution, flexible spending or health savings account, life and AD&D insurance, short- and long-term disability coverage, paid time off, employee assistance, participation in a 401k program with company match, and additional voluntary or legally required benefits. **About NTT DATA** NTT DATA is a $30 billion business and technology services leader, serving 75% of the Fortune Global 100. We are committed to accelerating client success and positively impacting society through responsible innovation. We are one of the world's leading AI and digital infrastructure providers, with unmatched capabilities in enterprise-scale AI, cloud, security, connectivity, data centers and application services. our consulting and Industry solutions help organizations and society move confidently and sustainably into the digital future. As a Global Top Employer, we have experts in more than 50 countries. We also offer clients access to a robust ecosystem of innovation centers as well as established and start-up partners. NTT DATA is a part of NTT Group, which invests over $3 billion each year in R&D. Whenever possible, we hire locally to NTT DATA offices or client sites. This ensures we can provide timely and effective support tailored to each client's needs. While many positions offer remote or hybrid work options, these arrangements are subject to change based on client requirements. For employees near an NTT DATA office or client site, in-office attendance may be required for meetings or events, depending on business needs. At NTT DATA, we are committed to staying flexible and meeting the evolving needs of both our clients and employees. NTT DATA recruiters will never ask for payment or banking information and will only **************** ******************************* email addresses. If you are requested to provide payment or disclose banking information, please submit a contact us form, ************************************ . **_NTT DATA endeavors to make_** **_************************* **_accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please contact us at_** **_************************************_** **_._** **_This contact information is for accommodation requests only and cannot be used to inquire about the status of applications. NTT DATA is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. For our EEO Policy Statement, please click here (***************************************** . If you'd like more information on your EEO rights under the law, please click here (***************************************************** . For Pay Transparency information, please click here (***************************************** ._**