Manufacturing technician jobs in Midland, TX

NATURAL GAS TECHNICIAN FLSA Class: NON-EXEMPT This position is responsible for the day-to-day operations and maintenance of natural gas treating and processing equipment including refrigeration, compression, and dehydration. Equipment includes but is not limited to mobile refrigeration units, reciprocating natural gas compressors, dehydrators, fluid separation equipment, vales, gas measurement equipment, etc. Essential Duties and Responsibilities: Act as lead regarding all field gas activities. Extensive experience working with MRU/Dehydration/Compression systems. Provide daily oversight including- Operating equipment per operating ranges, inspecting equipment periodically to detect malfunctions or need for repair, and performing minor maintenance on equipment. Must be willing to develop a working knowledge of fleet equipment. Ability to troubleshoot and work through problems efficiently. Read, monitor, and record various operating conditions such as pressure, temperature, hours of operations, fuel consumed, water levels, etc. De-pressure equipment. Responsible for calculating, designing, and ensuring proper flows, temperatures, and pressure levels. Moderate use of hand tools to work with and repair mechanical and electrical equipment. Mechanically inclined Understanding of simple electronics and electrical equipment is beneficial. Will be required to complete all training including Flash Arc Training and Basic Electrical Safety Training as provided. Must properly use ladders and safety harnesses. Must be able to determine appropriate level of personal protective equipment (PPE) needed for the specific assigned task. Must possess the ability to self-supervise on daily tasks and metrics. Ability to work with a team and standalone for multiple hours. Must present equipment, tools, and self in an orderly and tidy manner. Be available by phone while on scheduled rotation. Able to operate a company vehicle in a safe manner as well as maintain a clean driving record. Comply with all safety standards and procedures. Oversee safety and environmental requirements while operating equipment onsite along with assisting with incident response and investigations as needed. On time completion of all assigned training Promotes ethical behavior in all aspects of the business and lead by example. Computer literate with the ability to utilize online forms/automation. All other duties and responsibilities as assigned by Supervisor. Other Requirements: Minimum 7+ years related experience, preferably in the oil and gas industry. High School diploma, skilled labor certificate or equivalent. Willingness to work in exposure to extreme temperatures, wind, precipitation, in addition to working at heights. Ability to stoop, sit, stand, or be on their feet for extended period of times. Able to lift 25 pounds up to 10 times per shift. Mechanical Aptitude. Valid Driver's License. Good written and verbal communication skills. The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. VoltaGrid is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, sex, marital status, veteran status, sexual orientation, genetic information, arrest record, or any other characteristic protected by applicable federal, state or local laws. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities, and general treatment during employment #LI-DNP

OFS Facility Operations | Flowback & Surface Pressure Control Equipment Force Pressure Control is seeking safety-oriented production personnel to work its Permian Basin facility located in Midland, TX. Production personnel will be tasked with inspection, rebuild, and maintenance of pressure control equipment including, but not limited to, multi-phase test separators, manual and hydraulic choke manifolds, small-bore manual and hydraulic gate valves, low-torque valves, etc. Working background with flowback & pressure control equipment is required. Local candidates only. The Production Technician position is a full time, non-exempt position. Hourly pay rate commensurate with experience. Total compensation package includes paid time off / paid holiday schedule, health / medical / ancillary benefits, and 401(k) retirement plan sponsorship.

We put the unity in "opportunity." Opportunity Snapshot: Compensation: $28/hour Assignment Duration: 12 months+ Work Schedule: 10/4 Rotation Benefits: Comprehensive insurance with 401(k) program, PTO & Holidays Responsibilities Responsible for the maintenance and repair of production equipment Troubleshoot problems, diagnose equipment failures, and make repairs as needed Work with other production staff to ensure that production is meeting quality and quantity goals Perform basic to intermediate level pumping skills which include, but not limited to, tank gauging, the proper operation of heater/treaters and 3 phase separators, and all attendant valve and oil seals and seal records Reading and recording all needed meter readings Visually inspecting Surface equipment daily for defects, leaks, neatness, and damage Observing, recording and inputting oil and gas production volumes daily Operating properties to ensure all regulatory, environmental and safety compliance issues and goals are met Seeking ways to reduce direct lease operating expenses by noting problems and/or recommending courses of actions to supervisor Check production units daily and responsible for creating and maintaining daily production reports Perform various other field related activities as required Communicate between regular and relief pumpers on rotations in written form Leading by example in areas such as EHS, maintenance and record keeping Qualifications Associate's degree in engineering or a related field is required Minimum of 3-5 years of experience is required. Previous experience in oil and gas industry required Must have gas lift experience. Familiarity with beam, gas lift and esp wells Compressor experience a must Basic computer skills and familiarity with SCADA Ability to work with minimal supervision. Ability to work independently and as part of a team Safety Sensitive position subject to random drug and alcohol screening Valid driver's license and clean record High school diploma or equivalent required The Bergaila Way: The Bergaila Companies is a nationally recognized leader in providing staffing services to all sectors of the energy industry. We continually focus on partnering with talented professionals, engineering the perfect fit between our clients and employees. Choosing a career path with Bergaila grants you immediate access to nationally recognized organizations we partner with. Bergaila consistently attracts and retains its Employees with our dedicated internal service team, top tier benefits programs for contractors and their families, and commitment to place you in the desired career of your choice. Client Overview: Our Client is a global international energy exploration and production company and one of the largest oil producers in the United States. Founded in 1920, our client's technical expertise and proven ability to deliver lasting results are the hallmark of their international success. While manufacturing the building blocks for life-enhancing products, our client utilizes leading edge technologies that grow their business and simultaneously help to advance a lower-carbon world.

Salary: $50 - $62 per Hour DOE PLCs Plus International is seeking an Automation / Commissioning Technician for our Midland Texas operations TheAutomation / Commissioning Technician reports directly to the Automation Engineering staff and is responsible for testing and commissioning all control system components and loops as directed. Duties include, but are not limited to: Assisting in planning as required Calibration and testing of transmitters, switches, converters, recorders, indicators, actuated valves, and control loops back to PLC or DCS systems Ensures that there is adequate data sheets and system documentation to complete all required pre-commissioning and commissioning checks and tests Verifies all test equipment is NIST Traceable and has a current calibration date Utilizes industry standards for testing such as ISA or another recognized and approved standard Completes Red lines and B check sheets as required Required Minimum Qualifications (Techs): High School Diploma, or Equivalent Valid Drivers License with clean driving record Five (5) years experience as FCO/Commissioning Technician in oilfield, preferred Required Education, Training and Certificates: OSHA 10, or ability to obtain upon hire H2S, or ability to obtain upon hire Required Knowledge, Skills & Abilities: Ability to work in a team environment Ability and willingness to receive and follow direction Ability to clearly communicate, both verbal and written Ability to work safely, and recognize potential hazards Ability to legally operate a motor vehicle Ability to recognize and respond to dangerous situations or emergencies such as high voltage systems, electrical fires, loose hot wires, broken power lines, etc. This position will be working with 50 volts or less. No high voltage repair or firefighting is within job responsibilities Ability to diagnose system malfunction, locate cause of breakdown and correct the problem or recommend solution Ability to set and balance priorities in order to complete projects on time Ability to make decisions and recommend appropriate course of action in difficult situations Ability to handle stress and possess positive trait even in difficult or challenging situations Automation / Commissioning Technician Specific Skillsets: Emerson ROC 800 Comprehensive knowledge of control systems, equipment, operational and mechanical systems including; installation, testing, maintenance, and repair Knowledge of applicable codes, standards, and regulations Working knowledge of AC and DC control circuits Opportunity: PLCs Plus has solidified its reputation with great clients in the Permian Basin. West Texas has a tremendous amount of opportunity for growth and career development. You truly have the chance to have the American Dream and true job satisfaction. There is a lot of work that shows no sign of slowing. We would love for you to be a part of team PLCs Plus and take the opportunities that are available in this burgeoning market. Physical Demand/Work Environment: The physical demands described here are representative of those that must be met by the incumbent to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the incumbent is regularly required to talk, hear, and see. The incumbent frequently is required to stand, stoop, kneel, crouch, climb, balance and walk. The incumbent is occasionally required to sit. The incumbent must frequently lift and/or move up to 50 pounds and push/pull up to 100 pounds. Visual Acuity: must be adequate to perform all required tasks in a safe manner. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually loud and may require use of ear plugs on occasion. Work is usually done outside at a job site/field site that may have inclement weather conditions. The incumbent will be required to drive / travel to many locations within the Permian Basin. The incumbent is exposed to moving mechanical parts, vehicles and equipment. Disclaimer: The above job description covers the principal duties and responsibilities of the job. The description shall not however, be construed as a complete job listing of all duties, which may be required from day-to-day

Calpine Corporation is America's largest generator of electricity from natural gas and geothermal resources with operations in competitive power markets. Its fleet of 77 power plants in operation represents over 27,000 megawatts of generation capacity. Through wholesale power operations and its retail businesses, Calpine serves customers in 22 states and Canada. Its clean, efficient, modern and flexible fleet uses advanced technologies to generate power in a low-carbon and environmentally responsible manner. The company was established on the premise that a strong commitment to the environment is inextricably linked to excellence in power generation and corporate responsibility. Since its founding in 1984, Calpine has led the power industry in its unwavering commitment to environmental stewardship. In addition, its renewable geothermal plants use steam generated deep below the earth's surface to produce clean, renewable electricity. Job Summary (includes but is not limited to the following, other duties may be assigned) Responsible for start, stop and monitoring of equipment including reading gauges and meters and recording activities in operating logs and records. Uses computers and monitoring equipment to measure, record and make adjustments within operating parameters. Performs a variety of plant maintenance tasks including diagnosis, maintenance and repair of mechanical and electrical equipment in a safe, efficient and economical manner. Performs overhaul maintenance and system improvement tasks. Performs chemical analysis and chemical control on steam, cooling and condensate systems, and maintains chemistry logs. Incumbents assist in the development of standard operational procedures and provide input to plant betterment items to improve plant efficiency, reliability and safety. Ensures compliance with all local, State and Federal regulations and plant procedures. Regularly required to maintain plan security, operate heavy equipment such as manlifts and forklifts, and handle and transfer bulk chemicals. Job Responsibilities Senior-level; recognized technical expertise in own and possibly related functions. Performs a variety of complex technical service/support duties requiring specialized knowledge. Regularly makes decisions on non-routine or escalated technical issues. Independently prioritizes and executes responsibilities effectively for a single trade, group of related tasks or functional area. Checks own work and possibly the work of others; work results are of the highest quality standards and advanced technical competency. Errors may be serious, usually not subject to direct verification or check. Duties and tasks reflect substantial variety and complexity. Resolves the most complex technical issues, conferring with Team Leader occasionally; may serve as resource to others in resolution of complex issues. Works under limited supervision. Prioritizes own weekly schedule and may guide others in the completion of tasks within clearly defined schedules as set by management. Regularly provides on-the-job skills training to others in complex technical areas. Job Requirements High School Diploma, degree from technical/vocational school, military service or equivalent. Senior-level; generally 10+ years directly related experience including understanding of health and safety regulations, and previous experience working with and around hazardous energy, chemicals and waste materials including knowledge of safe handling, storage, and transport. Requires previous experience using test equipment and calibration appliances. Experience with machinery repair and control systems. Strong mechanical aptitude and basic understanding of chemistry, physics, electricity and mathematics. Advanced certifications/licensures. Valid state driver's license. Additional Calpine Information: Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individuals with Disabilities. Calpine is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with physical and/or mental disabilities. If you are interested in applying for employment and need special assistance or an accommodation to use our website or to apply for a position, please send an e-mail with your request to *************************. Determination on requests for reasonable accommodation are made on case-by-case basis. Please view Equal Employment Opportunity Posters provided by OFCCP here

TEAM UP WITH US! The Machine Technician III is responsible for providing high quality repair service on equipment, in order to respond to customer needs in a positive, caring and timely manner and to ensure maximum value for work performed. DO YOU HAVE WHAT IT TAKES? WHAT YOU'LL DO: * Complete assigned jobs and task to meet flat rate times and re-do metric. * Work safely and follow all WCAT safety policies and procedures. * Complete related paperwork and access databases required to complete job (work order, parts order, JSA, DBS, SIMS, SIS web, STW) accurately and timely. * Follow contamination control and HAZMAT rules and regulations. * Remove and install parts, disassemble and assemble components, and test and adjust assemblies with ability to self-monitor work quality. * Mastery level knowledge of basic hand tools, air tools, precision measuring tools and instruments, laptops, diagnostic software and cranes and rigging equipment. * This position requires the ability to provide accurate quotes and pricing estimates to the customer. * Diagnose and troubleshoot problems, give recommendations for repairs and make all critical machine and engine repairs and adjustments. * Apply specific failure analysis and procedures in determining proper diagnosis. * Test and verify correct operation of all repairs and adjustments. * Adhere to all company policies. * Complete all Level I & Level II & III assigned training in a timely and proficient manner. * Able to mentor Machine team members. * Must be able to obtain or currently possess adequate tooling to perform duties. * Other duties may be assigned. WHAT YOU'LL NEED: * High school diploma or general education degree (GED); or five to eight years related experience and/or training; or equivalent combination of education and experience. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals and write routine reports and correspondence. * Knowledge of Database software; Internet software; Manufacturing software and Order processing systems. * Must be at least 21 to be assigned and operate field vehicle. * May be required to complete DOT physical. * May require MSHA certification Other Qualifications. * Will be certified prior to operating a forklift and/or man lift. * Requires general knowledge of engines, electrical, electronic, hydraulic, mechanical, pneumatic systems and components. * Flexibility to work various schedules including shift work, required overtime and on call. * Must be certified in air-conditioning. * Successfully complete Work Steps assessment. WHY WORK WITH US? * We like to take care of business and have fun doing it! * We offer health, dental, vision, life, and more as a comprehensive benefits package. * Don't you want to work with awesome people? IMPORTANT INFORMATION: While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is frequently required to climb or balance. The employee is occasionally required to sit or smell. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and toxic or caustic chemicals. The employee is frequently exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold and extreme heat. The employee is occasionally exposed to risk of electrical shock and vibration. The noise level in the work environment is usually moderate. Required travel up to 20%. This position is considered a safety sensitive position. The Job description is subject to change by the employer as the needs of the employer and requirements of the job change. EEO/AA Keywords: mechanic, heavy equipment mechanic, diesel mechanic

Looking for a career opportunity? Come join Wood as a Production Technician in Kermit, TX Wood offers health benefits, 401k, vacation and more. Authorization to work lawfully in the US without sponsorship from Wood is required. Prepares for and performs maintenance, taking readings, doing rounds, issuing work permits, following procedures, initiating work requests, writing procedures, and interfacing with support groups. Pro-actively monitors well and equipment performance, take appropriate action to maximize production. Works with support groups to optimize chemical pump rates based on production data (corrosion, paraffin, soap injection, etc.). Interfaces with Engineering for data gathering requests. Tracks test compression data. Conducts fluid levels with echo meter. Candidate responsible for horizontal well operations, gas lifted wells, ESP's, three phase separation, gas compression and minor maintenance of valve and pumps. Responsibilities 3 + years working as a lease operator/pumper with artificial lift systems Provides technical/functional and/or administrative support. Production computer software knowledge a plus. General working knowledge of specific systems, terminology and procedures used within the department. Performs routine tasks. Able to solve problems and make basic decisions. #woodpermian

Job Description Knock Out Energy, LLC Production Flowback Operator Midland, TX and Surrounding Remote Lease Locations DUTIES AND RESPONSIBILITIES The Flowback Operator is responsible for accurate collection and reporting of well data on an hourly basis with the ability to understand and interpret the data and look for signs of well variance. They will also perform ongoing dumping of sand from separators as well as pulling sand filter screens for cleaning. This individual can safely work well on remote locations under minimal supervision with the assistance of a supervisor. The Flowback Operator will also have a full understanding of equipment functionality and be able to perform maintenance on most equipment. Specific responsibilities Accurately collect and report well data based on well flow Troubleshoot and perform most equipment maintenance Check differential pressure on a regular schedule, pull screens as needed, and effectively clean screens Regularly dump sand separators Gauge frac tanks Identify safety concerns and report them to Supervisor Maneuver location safely and know where hazards Responsible for reading and interpreting documents such as safety rules, operating and maintenance manuals, and procedure manuals Maintain a clean and organized work area Other tasks as assigned Education, Training and Experience 2- 3 years of previous production flowback experience is required. Skills and Abilities Experience operating surface pressure control and separation equipment (e.g. pressure control manifolds, multi-phase separators, sand management equipment, line heaters, flare systems, and other surface flowback equipment) Thorough understanding of pressures in tubing and casing as well as where to find pressures and what those pressures mean Ability to recognize differential pressure to know when to pull screens for cleaning. Able to adjust back pressure regulators Skilled at changing orifice plates Capable of collecting and sampling well fluid checking chloride and oil API gravity. Thorough knowledge of well opening sequence procedure to bring a well online Full understanding of separator functionality and ability to adjust fluid levels as needed Detailed comprehension of the separation process of oil, gas, water and solids Know the flow path from the well head to the separation equipment through to storage tanks and pipelines Capable of independently performing filter operations In depth knowledge of pumps, valves, rigging mechanisms, pressure testing, etc Full Competency in collection, interpretation and reporting of well data Basic understanding of how to and when to equalize flow back tanks Able to judge fluid rates and trucking disposal track times Able to read. understand and execute an established evacuation plan Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form Ability to add, subtract, multiply, and divide in all units of measure using whole numbers, and decimals PHYSICAL AND SAFETY REQUIREMENTS Can lift and carry up to 100 lbs max Can do 200 lb push/pull Ability to climb a ladder Able to do a 50-lb overhead lift Repetitive turning like on a choke wheel or well head valve Able to swing 10 lb sledge hammer. Sitting, bending, standing, walking, and typing 12 hours per day. Ability to pass the pre-employment drug/alcohol screen as well as a Motor Vehicle Record check. Able to work in weather elements during the day or nighttime. The employee must be adaptable to the unique work conditions that consist of long and irregular hours and changes in locations of work assignments. This position requires working in the field setting a majority of the time with various conditions consisting of: wet, cold, and/or humid conditions at well sites, working near moving mechanical parts, vibration, loud noise, potential fumes or airborne particles, exposure to toxic or caustic chemicals where proper PPE must be donned. Powered by JazzHR Fx9T3QQOgs

Job Description LOCUS FERMENTATION SOLUTION Title: Production Operator 1 Company: Locus Fermentation Solutions Status: Non-exempt Reports To: Production Supervisor/Manager Who WE are… Locus Fermentation Solutions is a USA- Based Biotech company delivering powerful bio-based solutions across four primary markets: oil & gas, mining, agriculture, and industrial/CPG. We specialize in high performance intermediary formulations and produce glycolipids and microbes that act as formulation enhancers- pushing performance beyond the limits of conventional chemistry. OUR MISSION is to push the boundaries of traditional chemistry by using glycolipid and microbial additives as powerful formulation amplifiers that drive superior performance and sustainability across global industries. We are looking for creative and collaborative outside-the-box thinkers who thrive in fast paced, entrepreneurial style environments. Learn more about us at Locusfs.com! What you'll be doing: Position is responsible for performing the duties and responsibilities of fermentation production operations. Location: Midland,TX Key Responsibilities: Prepare reactors for fermentation including loading raw materials, setting parameters, testing equipment functionality, and inoculation of culture. Operate PLC to gather data and set temperature, pH, and other parameters. Prepare scheduled samples for testing and analysis by quality control. Clean and sterilize equipment, reactors, and all parts utilized in production. Maintain warehouse area and ensure high level of cleanliness and organization of materials. Perform routine maintenance on reactors, tanks, pumps, and other production equipment. Wear required PPE while carrying out position responsibilities. Follow SOP's and protocols to maintain product quality. Perform all other duties as assigned. Qualifications & Requirements High school diploma or GED required. Knowledge or experience in fermentation, or microbiology preferred. Schedule flexibility, including some weekend work required. Knowledge of machines and tools, including their designs, uses, repair, and maintenance preferred. Strong communication skills; both verbal and written. Ability to identify problems and execute standard procedures. Acute attention to detail. Ability to use MS Word, Excel, Outlook efficiently. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to move through the warehouse 60% of the time and remain in a stationary position 40% of the time. Must be able to wear and properly utilize required personal protective equipment (PPE), including hard hats, steel-toed boots, safety glasses, and hearing protection. May require occasional lifting or carrying of materials or equipment weighing up to 50pounds. Employee will occasionally use computer, phone, copier and other office equipment in the course of a day. The employee is required to consistently position self as appropriate to maintain equipment in the warehouse and progress production cycles. Work Environment: Work is performed in a temperature-controlled warehouse environment. Environments may include exposure to loud machinery, heavy equipment, and operational hazards. Must be adaptable to a dynamic environment with competing priorities and high-level business engagement. What's in it for you: Competitive Salary Medical/Dental/Vison Benefits 401(k) Savings Plan with Company Match Generous Paid Time Off (PTO) Paid Holidays Volunteer Hours Annual allowance of Floating Holidays Tuition Assistance and Continuing Education Reimbursement Policy Paid Uniforms and PPE

The mission of Speechify is to make sure that reading is never a barrier to learning. Over 50 million people use Speechify's text-to-speech products to turn whatever they're reading - PDFs, books, Google Docs, news articles, websites - into audio, so they can read faster, read more, and remember more. Speechify's text-to-speech reading products include its iOS app, Android App, Mac App, Chrome Extension, and Web App. Google recently named Speechify the Chrome Extension of the Year and Apple named Speechify its App of the Day. Today, nearly 200 people around the globe work on Speechify in a 100% distributed setting - Speechify has no office. These include frontend and backend engineers, AI research scientists, and others from Amazon, Microsoft, and Google, leading PhD programs like Stanford, high growth startups like Stripe, Vercel, Bolt, and many founders of their own companies. This is a key role and ideal for someone who thinks strategically, enjoys fast-paced environments, passionate about making product decisions, and has experience building great user experiences that delight users. We are a flat organization that allows anyone to become a leader by showing excellent technical skills and delivering results consistently and fast. Work ethic, solid communication skills, and obsession with winning are paramount. Our interview process involves several technical interviews and we aim to complete them within 1 week. What You'll Do Actively ship production code to the web products Work closely with your dedicated product team Participate in product discussions to shape the product roadmap Have the opportunity to work on new and exciting features that will impact millions of lives An Ideal Candidate Should Have Experience. You've built and ship products that have scaled to thousands or millions of users Customer obsession. You are passionate about the field and have the desire to build high quality product that serves customer needs Speed. You work quickly to generate ideas and know how to decide which things can ship now and what things need time Focus. We're a high-growth startup with a busy, remote team. You know how and when to engage or be heads down Collaboration. You know how to inspire, play, and negotiate with opinionated designers, marketers, and PMs Tech Stack: Vanilla JS, ReactJS, Redux, Firebase, Typescript What We Offer A fast-growing environment where you can help shape the culture An entrepreneurial crew that supports risk, intuition, and hustle A hands-off approach so you can focus and do your best work The opportunity to make an impact in a transformative industry A competitive salary, a collegiate atmosphere, and a commitment to building a great asynchronous culture The United States Based Salary range for this role is: 140,000-200,000 USD/Year + Bonus + Stock depending on experience Think you're a good fit for this job? Tell us more about yourself and why you're interested in the role when you apply. And don't forget to include links to your portfolio and LinkedIn. Not looking but know someone who would make a great fit? Refer them! Speechify is committed to a diverse and inclusive workplace. Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

We are looking to hire a QA Tech (Quality Assurance Technician) for a company in Odessa Tx . starts at $26. 00/hr . Job responsibilities are : Ability to read blueprints, interpret technical documents, and use precision measuring and testing instruments. Conduct tests and inspections on products, materials, and production processes to ensure they meet quality standards and specifications. Calibrate, maintain, and ensure the accuracy and reliability of testing and inspection equipment.

VersaTech is an Automation company with over 700 people and $100M+ in annual sales. VersaTech offers Instrumentation and Electrical services to the oil and gas market including construction, maintenance, commissioning and loop checking. VersaTech has offices in Houston, Dilley, Midland, New Orleans, Africa, and Dubai. Our scope of work includes both onshore and offshore projects in the US and overseas. VersaTech has an opening for an Instrumentation and Electrical Commissioning Technician in several US Locations. Responsibilities: The essential functions include, but are not limited to the following: Complete Customer furnished Commissioning Documentation to track Pre-Commissioning and Commissioning of Instrumentation and Electrical Systems Complete A and B Check Sheets Perform Loop Checking on Instrumentation Systems Perform calibration, installation, fault diagnosis, and repair of electrical, mechanical and pneumatic instruments and systems as needed to assist during the Commissioning Process. Calibrate, troubleshoot and repair plant instrumentation i.e., transmitters, analyzers, control valves, switches, relays, etc. Work with a wide variety of instruments including, ultrasonic, guided wave radar, mass flow, pressure transducers, RTDs, etc. Understand piping and instrument diagrams, signal flow diagrams, wiring diagrams, panel drawings, one-line drawings, loop sheets, and wire lists Perform all duties in manner consistent with environmental, health and safety policies Work as part of the Commissioning Team to ensure that Loops are completed based on Construction Schedules and Systems Completion Planning.

The Quality Control Technician will be responsible for maintaining precision equipment calibration and maintenance cycles, performing dimensional inspection, reviewing in process work, electrical testing and submitting documentation associated with these job duties. This role is essential in maintaining product quality, identifying defects, and supporting continuous improvement initiatives. Key Responsibilities: At start of shift, review daily Variable Speed Drive Cabinet Intake and any applicable rush jobs. Verify associated equipment is in the Digital Document System and input information if it is not present. Print associated QR codes from Digital Document System and affix them to unit. Perform throughout day as workflow changes. Determine workflow and prioritize tasks for that day. Perform Daily Pre-Use Calibration Checks on all Precision Measuring Equipment. Ensure all equipment's unique identifiers are clearly visible and legible. Stage all inbound crates or existing pre-system stock in QC area for determined daily inspection and notify or return to inventory post inspection process. Verify all received MTRs to Material Specification Sheets and perform hardness validation test on a sample from each lot/batch. Dimensionally measure assigned lot/batch per Inspection Ratio Guidelines per print criteria callouts, including 100% sealing surface and critical point inspection on each lot/batch. Complete inspection reports and upload a copy of inspection report, print utilized for inspection and MTR verification into Digital Document System. Verify each in process and testing station has entered their associated Digital Document System criteria for all work performed that day. Ensure all pictures, videos and work verification steps have been completed and uploaded before approving units to be released for storage or shipping. If documentation is not present, have associated technician perform their job duties. Take custody, quarantine and complete Non-Conformance Reports and Management Team notifications as necessary based on inbound, in-process or testing non-conforming product. Work with operations to ensure the transfer of all records from the Digital Document System to associated Well Intelligence job files. Enter new equipment and precision instruments for calibration into the Digital Document System as needed. Assist in the development and implementation of quality control procedures and protocols. Participate in continuous improvement initiatives to enhance product quality and efficiency. Ensure compliance with all safety, quality, and regulatory standards. Perform on call duties as necessary. Requirements Qualifications: High school diploma or GED; associate's degree in a technical field preferred. Understanding of quality control, methods and testing techniques. Proficiency in using inspection and testing equipment. Excellent attention to detail and problem-solving skills. Strong documentation and reporting skills. Ability to work independently and as part of a team. Good communication and interpersonal skills. Basic computer skills, including proficiency in Microsoft Office. Ability to strictly adhere to and enforce Quality Standards in a firm but diplomatic manner. Physical Requirements: Ability to lift up to 50 pounds. Ability to stand for extended periods. Fine Manipulation Motor Skills Vision correctable to 20/20.

Assistant Technician Summary of Position: Works at the direction of the Branch Manager and the Level II Technician while on location. Responsible for assisting Level II Technician with daily field operations. Provides technical and manual support as needed. Works directly with Client Company inspectors and field personnel. Responsible for maintaining communication with branch manager and dispatch personnel under the direction of assigned Level II Technician on location. Must be able to travel and work weekends and evenings. Duties Include: • Responsible for assisting in client satisfaction as directed by supervising Level II Technician • Set up and use various equipment • Responsible for completing required paperwork, including OJT tracking, dosimeter reports, and timecards daily • Responsible for following the direction of the Technician in all aspects of the job including the Company safety policies and safe driving • Performs the duties of the job as directed • Perform other job-related tasks as assigned • Adheres to the Company Handbook & Policies • Obtains and maintain all required certifications and licenses Requirements: • Self-motivated and reliable • Ability to follow work schedule • Assist in keeping company and customer commitments • Ability to take direction • Success in working on small teams • Ability to absorb both on-the-job and classroom training • Maintain a high level of integrity • Must be able to pass a drug test, MVR, and background check • Valid driver's license • Basic computer skills • Must abide by Company safety policies at all times • Eagerness to learn and grow within the organization • High School Diploma or Equivalency • No prior Radiography experience required Working Conditions • Standing, walking, sitting, lifting, crawling, carrying, pushing, pulling, reaching, handling, feeling, talking, hearing, visual acuity, accommodation and color vision • Moving, carrying and lifting objects in excess of 75 pounds • Climbing and working off of ladders, stairs and scaffolding in excess of 100 feet continuously throughout shift • Be able to climb ladders and platforms up to 250 feet with a harness and lanyard • Be able to step up into vehicles or onto equipment • Working extended hours and standing for extended periods of time • Working in indoor and outdoor environments in conditions of extreme heat and cold • Work in and near industrial hazards • Be able to work outdoors in warm, hot and cold conditions • Must be able to travel • Must be able to work overtime, weekends and evenings, as needed

JOB FUNCTIONS AND KEY RESPONSIBILITIES: * Review and monitor plant operation/processes for optimizing quality and production of products meeting required data specifications, including but not limited to working safely and having good trouble shooting skills on mechanical equipment (natural gas internal combustion engines, natural gas compressors, electrical and pneumatic controls, pumps, and control equipment). * Install equipment such as pumps, motors, and valves and perform general maintenance when needed. * Operation of cryogenics plant, stabilizer, amine and glycol treatment systems * Collect data readings and monitoring plant equipment * Perform minor maintenance on compressors and install equipment such as pumps, motors, and valves and perform general maintenance when needed. * Fill out applicable work/hot work permits, lockout/tag-out documentation, attend and participate in tailgate sessions with others involved in work site activities. * Perform routine shutdowns and startup of equipment and perform emergency procedures when required. * Act as relief operator as needed. * Other duties as assigned. MINIMUM ESSENTIAL QUALIFICATIONS: * Minimum of 2 years of related midstream work experience. * Minimum High School Diploma or Equivalent * Ability to work 12-hour rotating (day/night) shifts and will require some weekends and holidays to be worked. * Possess and maintain a valid driver's license to include a safe driving record satisfactory to the company. * Ability to work overtime, weekends, holidays, with the ability to respond to call outs as needed to fulfill business objective and the ability to work shifts for plant or field conditions. * Interpersonal communication skills are required in order to interface with all affected teams, personnel, and vendors. * Strong work ethic with demonstrated ability to effectively work with minimum supervision * Solid computer skills to include Microsoft Office Software * Ability to lift, push, and pull at least a minimum of 50lbs. * Ability to work in changing climate conditions. * Able to work in close quarters: i.e., work while kneeling, squatting, sitting, climbing, and standing. * Follow and adhere to all applicable Personal Protective Equipment (PPE) guidelines (ex: eye protection, footwear, Nomex). * Regular and reliable attendance PREFERRED QUALIFICATIONS: * 3+ year experience in the industry or knowledge of plant operations. * Has a good understanding of utilizing horsepower and compression. * Warehouse knowledge and mechanical aptitude a plus * Able to troubleshoot equipment failures and process failures. * Process Safety Management knowledge. EQUAL EMPLOYMENT OPPORTUNITY: Targa Resources provides equal employment opportunities based on merit, experience, and other work-related criteria and without regard to race, color, ethnicity, religion, national origin, sex, age, pregnancy, disability, veteran status, or any other status protected by applicable law. We also strive to provide reasonable accommodation to employees' beliefs and practices that do not conflict with Targa's policies and applicable law. We value the unique contributions that every employee brings to their role with Targa. #LI-AR1

The position of Production Tech III is responsible for oil and gas well operations, well testing, operating and maintaining field equipment and facilities, surveillance of general field operations and maintenance of various databases regarding production and operations. Responsibilities * Non-scheduled callouts outside normal business hours can be expected. * Types of wells include flowing, beam pump (with electronic pump-off controller), plunger lift, water injection and water disposal. * Types of facilities include production tank batteries, flowlines, LACT (lease automatic custody transfer) facilities, water injection plants, natural gas compression, cathodic protection and metering devices (electronic gas measurement and others). * Job is to be performed employing safe work practices while utilizing acceptable environmental procedures to maximize earnings while minimizing costs on assigned oil and gas producing properties. * Daily monitoring of multiple well sites by vehicle. * Test, calibrate and troubleshoot equipment and mechanical problems. * Perform mandatory paperwork required by customer and regulatory agencies. * General housekeeping and field maintenance. Qualifications * 2+ years of Oil & Gas Lease Operator experience required. * High School Diploma or GED required. * Computer knowledge: proficient with MS Windows environment. * Strong initiative and self-starter. * Ability to keep neat and accurate records. * Multi-task orientation with skills related to work prioritizing. * Excellent interpersonal communications skills in a team environment. * General mechanical troubleshooting and repair skills. * Ability to identify operational inefficiencies. * Understanding of business fundamentals. * Ability to implement cost effective solutions. * Technical skills related to math and analytical thinking. * Understanding of importance of environmental and safe work practices. * Must be able to climb ladders and stairs. * Walking, bending, stooping is required. * Must be able to wear personal protective equipment including the use of a respirator. * Must be able to respond to visual and audible alarms. * Must meet conditional job offer requirements including background check, drug test, MVR check, and fit for duty/agility test.

We are seeking a dedicated Associate Manufacturing Engineer to contribute to the development and optimization of manufacturing processes. The role involves designing, modifying, and testing manufacturing methods and equipment, as well as providing support to production teams. Responsibilities * Develop manufacturing processes by studying product requirements and designing, modifying, and testing methods and equipment. * Provide manufacturing engineering support to production by answering questions and requests. * Collaborate with Design Engineering to optimize manufacturing flow, cost, and layout by applying knowledge of product design, fabrication, assembly, tooling, and materials. * Create product and process reports by collecting, analyzing, and summarizing information, and soliciting observations from operators and technicians. * Draft work instructions in accordance with product requirements and assembly drawings. * Ensure manufacturing procedures comply with safety and environmental regulations. Essential Skills * Proficiency in MS Office and CAD/CAM tools. * Bachelor's Degree in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Aerospace Engineering, or related discipline OR 8 years of equivalent experience. * 0-3 years of experience in a manufacturing environment. Additional Skills & Qualifications * Understanding of tooling, gauging, Six Sigma principles, and capability studies. * Experience in technical writing, including procedures and work instructions. * Exposure to process development and manufacturing engineering in aerospace or high-tech production. Work Environment This position is based at an on-site manufacturing facility in Midland. Benefits include direct hire status, relocation assistance, hotel accommodation for 2-3 months, a stipend, and stock options. Job Type & Location This is a Permanent position based out of Midland, TX. Pay and Benefits The pay range for this position is $90000.00 - $110000.00/yr. client will offer salary, stipend, hotel stay for the first 2-3 months, RSU as well as relocation costs to move to Midland, TX Workplace Type This is a fully onsite position in Midland,TX. Application Deadline This position is anticipated to close on Dec 19, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

McCarty Equipment, a SunSource company, is a highly recognized value-added distributer and fabricator of hose. With 17 locations across North America, we provide a wide range of hose, valves, gaskets, fittings and tools. We have the capability to provide support for all your industrial and MRO needs with a vast array of tools, hand tools, fasteners, consumables, and a factory authorized tool repair facility. Check us out! ************************ Assist in any area of the shop to include the gasket, hose, mechanical seal, cylinder repair and/or conveyor belting departments. Uses various tools to measure, manipulate and cut gaskets and fabricate hoses and other related products. Assist in general shop duties. Works under close supervision.Essential Duties and Responsibilities may include but not be limited to: Participate in counting inventory for cycle counts and maintain stock (i.e., tag, stack, sort, keep organized). Clean equipment and all shop areas Participate in lean activity and safety regulations Regularly make suggestions for improvement and work on continuous improvement projects for lean, quality and safety Additional duties include but may not be limited to: Operate soft gasket press, circle cutter, allpax cutter, and shears. Paint gaskets or use a punch press machine with dies to cut soft gaskets. Assist hose area with basic duties such as hose banding and crimping, roll, cut or test hoses. Assist in the hydro or hydraulic hose area. Assist in mechanical seal department, disassembly of mechanical seals, cleaning, bead blasting of components, and receive, pack and ship mechanical seals and component Assist shipping to ship, pack, receive items and build crates Operate forklift upon certification Use tape measure regularly Any other duties as assigned Education and Experience: High school or equivalent (GED) required. 1 year industrial shop experience preferred. Basic computer skills preferred. Must be able to use a tape measure and understand basic math (add, subtract, multiply and divide). Physical Requirements: Ability to lift up to 50 lbs on a regular basis Equal Opportunity Employer, including disability and protected veteran status. If you are an individual with a disability and require an accommodation to complete the application process, please contact ********************** to request reasonable accommodation. Only requests for accommodation in the application process will be returned from this email address. This employer uses E-Verify. Please click here for additional information. (For Illinois E-Verify information click here, aquí). Sun-Source | Privacy Policy

Zachary Piper Solutions is seeking an Associate Manufacturing Engineer to join a team as they build low Earth orbit satellites to deliver direct-to-device 5G connectivity. This is a direct placement opportunity located in Midland, Texas and is supporting shift work on a rotational basis from 4PM-1AM. The Associate Manufacturing Engineer will assist in developing, evaluating, and improve manufacturing methods and processes for the purpose of sustaining the manufacture of existing products as well as the introduction of new products. Responsibilities for the Associate Manufacturing Engineer include: * Assess new product concepts and designs for manufacturability and provide such assessment and recommendations to R&D/Product Engineering. * Develop methods and processes to manufacture new products in the safest manner, at the desired quality standards, and at the lowest cost to meet projected demand in a timely manner. * Conduct detailed process design, including layouts, tooling, fixturing, programming testing and documentation. * Continuously improve current production methods using Six-Sigma methodologies and utilizing knowledge of product design, materials and parts, fabrication processes, tooling, and production equipment capabilities, assembly methods and quality control standards. Required Qualifications for the Associate Manufacturing Engineer include: * 1-3+ years of experience, with a preferred background in aerospace or automobile sectors * Experience with pFMEA/Lean Manufacturing/ Six Sigma * Experience with AutCAD, ERP/MES/PLM systems * Willingness to support flex hours onsite Compensation for the Associate Manufacturing Engineer includes: * Salary Range: $70,000-$85,000 depending on years of experience * Full Standard Benefits: PTO, Paid Holidays, Medical, Dental, Vision, 401k plan, Sick leave as required by law This job opens for applications on 10/13/2025. Applications for this job will be accepted for at least 30 days from the posting date. #LI-AD1 #LI-Onsite Aerospace industry experience, Automotive industry experience, Manufacturing engineering, Associate manufacturing engineer, Mid-level manufacturing engineer, High-volume production, New product introduction, Design for manufacturability, pFMEA, Lean Manufacturing, Six Sigma, Kaizen, AutoCAD, ERP systems, MES systems, PLM systems, Process design, Tooling and fixturing, Production layout, Troubleshooting, Quality control, Safety initiatives, Onsite work, Long working hours, First shift, Second shift, US Citizen, Excellent communication skills, Team collaboration, Adaptability, High energy, Willingness to work Saturdays, 0-3 years experience, 3-5 years experience, $85K salary range, $100K salary range, Active hiring, Production support, Shift expansion, Manufacturing process optimization, Continuous improvement, Proof of concept, Proof of principle, Technical documentation, Assembly methods, Production equipment capabilities, Product design knowledge, Material selection, Fabrication processes, Engineering support, Cross-functional collaboration, Production scalability, Cost reduction strategies, Quality standards, Process validation, Safety compliance, Engineering layouts, Shift leadership, Production planning, Manufacturing feasibility, R&D collaboration, Product qualification, Process troubleshooting, Engineering initiatives, Technical problem-solving, Production efficiency, Manufacturing documentation, Process engineering, Manufacturing systems, Engineering best practices