Manufacturing technician jobs in Murrieta, CA - 404 jobs

The Manufacturing Engineering Technician is a hands-on role responsible for supporting the development, improvement, and scaling of assembly and test processes for a Class III medical device. This position serves as a critical link between design and production by supporting process validations, maintaining and troubleshooting equipment, documenting manufacturing processes, and assisting with pilot and low-volume manufacturing operations. The role requires strong technical aptitude, attention to detail, and a quality-focused mindset. The Manufacturing Engineering Technician works closely with cross-functional teams including Mechanical, Electrical, Biomedical Engineering, Quality, and Operations to support the delivery and scale-up of a regulated medical device in a fast-paced environment. This position requires the ability to work independently with minimal supervision. Key Responsibilities This job description reflects the general nature and level of work performed and is not intended to be an exhaustive list of all responsibilities. Equipment Maintenance and Calibration Set up, operate, and maintain production and test equipment in accordance with manufacturing instructions and quality standards. Support equipment qualifications (IQ/OQ/PQ), process validations, and test method validations. Perform routine maintenance and calibration to ensure optimal equipment performance. Troubleshoot and resolve equipment issues to minimize downtime. Build products in compliance with environmental controls, hygiene requirements, procedures, and work instructions. Develop and support assembly and test fixtures per approved documentation. Inspect incoming supplier components against quality inspection requirements. Test, inspect, and measure finished products, components, and devices to verify compliance with functional specifications. Troubleshoot, adjust, repair, and perform root cause analysis on finished products and components. Process Support Assist in the development, optimization, and documentation of manufacturing processes. Support engineers in implementing process improvements to improve efficiency, quality, and cost. Assist Quality and Purchasing teams with inventory tracking and documentation. Support the creation, modification, review, and execution of work instructions, assembly drawings, manufacturing processes, protocols, reports, records, and engineering change documentation. Quality Assurance Conduct in-process and final inspections to ensure products meet quality and regulatory requirements. Document and report nonconformances and defects. Support failure analysis, root cause investigations, and corrective and preventive actions (NCRs, CAPAs). Maintain cleanroom and controlled manufacturing environments in compliance with housekeeping, ESD, and 5S standards. Documentation and Compliance Maintain accurate records related to equipment maintenance, calibration, and process changes. Ensure all activities comply with FDA regulations, ISO 13485, and Good Manufacturing Practices (GMP). Collaboration and Training Collaborate closely with manufacturing engineers, quality personnel, and production teams to support daily operations. Provide technical support and training to manufacturing operators on equipment and processes. Continuous Improvement Identify opportunities for process, equipment, and workflow improvements. Participate in Lean Manufacturing, Six Sigma, or continuous improvement initiatives as required. Qualifications, Knowledge, and Experience Education and Experience Associate degree or certification in Engineering Technology, Mechanical Engineering, Biomedical Engineering, or a related field; or equivalent hands-on experience. Minimum of 3 years of experience in manufacturing, assembly, or production, preferably in medical devices, pharmaceuticals, or other regulated industries. Skills and Competencies Strong ability to follow detailed procedures and accurately document work. Solid understanding of manufacturing processes and quality systems. Strong verbal and written communication skills. Ability to work independently and collaboratively in a regulated environment. Physical Requirements Ability to perform light material handling tasks, including lifting up to 35 pounds for short durations. Ability to sit for extended periods, including shifts of 8 hours or more. Frequent keyboard and computer use. Willingness and ability to wear cleanroom attire (gown, gloves, mask, etc.) for the duration of assigned shifts.

Definition Under general and/or immediate supervision from higher level engineering staff, performs a variety of journey level technical drafting, office and field engineering work; and provides assistance and information to the public. May exercise functional and technical supervision over less experienced technical staff. Position Snapshot/A Day in the Life: The Engineering Technician II performs routine drafting and technical engineering work in support of municipal infrastructure projects. Responsibilities include assisting with engineering design and planning, providing customer service, and performing technical office and field duties related to updating, maintaining, and analyzing the Public Works and Engineering Department's Geographic Information System (GIS) and utility infrastructure data. This position coordinates and conducts research, field data collection, and condition assessments of infrastructure assets, using GIS, database, and information management tools to support capital planning and ensure compliance with regulatory requirements. Essential Functions Engineering Technician II -This is the full journey level in the Engineering Technician series. Employees within this class are distinguished from the Engineering Technician I By the performance of the full range of duties as assigned including the moderately complex duties of drafting, office and field engineering work. Employees at this level receive only occasional instruction or assistance as new or unusual situations arise, and are fully aware of the operating procedures and policies of the work unit. This class is flexibly staffed and is normally filled by advancement from the I level, or when filled from the outside, requires previous work experience. ESSENTIAL FUNCTIONS:Incumbent must have the ability to: Review and process tract maps, parcel maps, of line adjustments, grants of easement, and street right-of-ways for recordation. Verify fulfillment of conditions of approval for new subdivisions; perform on-site inspections to verify survey monuments related to parcel maps and lot line adjustments. Prepare and draft technical engineering plans for construction of streets, alleys, storm drains, water lines, and other public improvements. Provide public assistance at counter and over the telephone. Prepare quantity and cost estimates for engineering projects. Maintain a variety of maps and records including tract maps, parcel maps, lot line adjustments, easements, street and address changes. Review engineering plans to determine appropriate layout of construction projects. Perform on-site inspections to obtain information; determine angles and set grade stakes, hubs, turning points and benchmarks using appropriate surveying techniques; locate and measure boundary lines, right-of-ways, and land grades. Make and check mathematical calculations related to surveying, drafting and basic engineering. Maintain accurate survey records in the form of field notes and sketches. Participate in a variety of engineering design and planning work related to municipal engineering projects. Answer questions and provide information to the public concerning engineering activities. Assist in development and maintenance of the record keeping and filing systems. Prepare, assemble and distribute copies of maps, charts and blueprints. Answer questions and provide information to the public concerning engineering activities. Perform any other tasks or functions deemed necessary to the daily operations of the employer. THE ABOVE LIST OF ESSENTIAL FUNCTIONS IS NOT EXHAUSTIVE AND MAY BE SUPPLEMENTED AS NECESSARY BY THE EMPLOYER. WORKING CONDITIONS: Position requires prolonged sitting, standing, walking, reaching, twisting, turning, kneeling, bending, and stooping in the performance of daily activities. The position also requires grasping, repetitive hand movement and fine coordination in preparing reports using a computer keyboard. Additionally, the position requires near and far vision when preparing and reading written reports and other work related documents. Acute hearing is also required when providing phone and counter assistance. Experience and Training Guidelines EXPERIENCE AND TRAINING GUIDELINES: A combination of experience and training that would likely provide the required knowledge and abilities is qualifying. The employee must have knowledge of: Engineering Technician II: In addition the qualifications of Engineering Technician I, knowledge of: Terminology, methods, practices and techniques of drafting. Trigonometry as applied to the computation of angles, areas, distances and traverses. Elementary surveying techniques and practices. Engineering maps and records. Ability to: Perform moderately complex engineering and mathematic calculations with speed and accuracy. Understand and follow written instructions and sketches. Use and care for drafting, surveying, and mechanical instruments and tools. Work independently in the absence of supervision. Experience: Engineering Technician II - Two years of increasingly responsible experience performing drafting and technical engineering work. Education: Equivalent to completion of the twelfth grade supplemented by specialized training in drafting, surveying or a related field. The City of Fontana has a flexible benefits plan. This plan allows for employees to select benefits based upon their individual needs. Full-time and Classified Part-time employees are eligible for benefits. Please to view our excellent employee benefit options. 01 What is your highest level of education? High School graduate or equivalent Some college Trade school graduate or Apprenticeship Associate's degree in related field Bachelor's degree in related field Bachelor's degree or higher in non-related field Equivalent to Bachelor's degree in related field Master's degree or higher in related field None of the above 02 Please indicate how much experience you have in performing drafting and technical engineering work. No experience Less than one (1) year. One (1) year or more year(s) but less than two (2) years. Two (2) or more years but less than four (4) years. Four (4) or more years but less than six (6) years. Six (6) years or more but, less than eight (8) years. Required Question

Dreaming big is in our DNA. It's who we are as a company. It's our culture. It's our heritage. And more than ever, it's our future. A future where we're always looking forward. Always serving up new ways to meet life's moments. A future where we keep dreaming bigger. We look for people with passion, talent, and curiosity, and provide them with the teammates, resources and opportunities to unleash their full potential. The power we create together - when we combine your strengths with ours - is unstoppable. Are you ready to join a team that dreams as big as you do? SALARY: $33.83/hr + 4.25 hours of daily OT SHIFT: 12 hours (rotating days/nights) every quarter COMPANY: ROLE SUMMARY: Sitting behind a desk all day was never your style. Rolling up your sleeves and solving tangible problems? That's more like it. If you are passionate about maintenance and troubleshooting while working in a fast paced environment, Anheuser-Busch could be your last stop in fulfilling your career. Our Maintenance Technicians are the key in guaranteeing that our quality is where it needs to be: the very best. If you are looking for a new challenge, come join our team today! As a Maintenance Technician, you will operate, maintain, troubleshoot, and repair high speed manufacturing equipment. You would also be responsible to perform quality checks by using powerful quality reporting systems. If you think you've got what it takes, we want to hear from you! JOB RESPONSIBILITIES: Operate, maintain troubleshoot and repair high speed manufacturing equipment Responsible for prioritization of operation and maintenance on multiple pieces of manufacturing equipment Perform quality checks and recording them in our automated quality control systems Interpret data to make quality and productivity decisions, we're a data driven company Perform routine and emergency maintenance on process equipment Maintain our work area in accordance with all sanitation and housekeeping standards, safety is our first priority JOB QUALIFICATIONS: High School Diploma or GED 1-3 years of industrial experience, preferably in a high-speed manufacturing or packaging environment Proficient in mechanical troubleshooting Able and willing to work a rotating 12-hour and other alternate work schedule, including day and night shift rotations, and required weekend and holiday hours Able and willing to work mandatory overtime as required Superior work history, including good attendance Knowledge of safety policies and procedures WHY ANHEUSER-BUSCH: At Anheuser-Busch, our purpose is to create a future with more cheers. For more than 165 years, we have delivered a legacy of brewing great-tasting, high-quality beers that have satisfied beer drinkers for generations. 99 percent of the products we sell in the U.S are made in the U.S. with more than $700 million in high-quality ingredients sourced from American farmers and more than $7 billion in goods and services purchased from U.S. suppliers, and we have invested nearly $2 billion in our 100 facilities across the country over the past five years. Through these investments, and as a leading American manufacturer and the nation's top brewer, we drive economic prosperity nationwide through investments in our people, facilities, and communities. We are the only brewer that invests in the U.S. at this scale. BENEFITS: Health benefits including Medical, Dental, Vision, Wellness and Tax-Advantaged Savings and Spending Accounts Life Insurance and Disability Income Protection 401(k) Retirement Savings options with a company matching contribution Chance to work in a fast-paced environment among a company of owners Free Beer! #AC-E

Would you like to join an international team working to improve the future of healthcare? Do you want to enhance the lives of millions of people? Grifols is a global healthcare company that since 1909 has been working to improve the health and well-being of people around the world. We are leaders in plasma-derived medicines and transfusion medicine and develop, produce and market innovative medicines, solutions and services in more than 110 countries and regions. **Monday - Friday** **6:30AM - 3:00PM** The **Manufacturing Technician 1** performs fundamental tasks within a GMP environment in support of more complex manufacturing operations. The Tasks include, but are not limited to, cleaning and maintaining the work place so that it meets the standards for controlling bioburden levels; cleaning operating equipment per applicable procedures so that it meets the standards established to prevent product contamination and maintaining records/logs neatly and accurately and in accordance with current standard procedures. The technician performs job tasks in a safe manner while following specific department safety rules. **PRIMARY RESPONSIBILITIES:** + Responsible for equipment setup and operation in a biologics processing environment for plasma derived pharmaceuticals + Detailed cleaning of equipment/facilities to MSP/cGMP standards. + Complete technical training profile as required. + Strict adherence to Dept. Safety Rules + Bulk processing and filtration involving monitoring processing parameters (i.e. pH, weights, separation, assay results..) + Perform real-time documentation during the production run. **ADDITIONAL RESPONSIBILITIES** English fluency both verbal and written. Basic math skills with proficiency in metric system. Accurate documentation skills are a must. Basic computer skills. Mechanical aptitude. Must be available to work any shift, including weekends. Ability to work well with others in a team environment is essential. Self-starter with the ability to work independently and use good judgment. Must be able to handle multiple priorities. Must be proactive, results oriented, and have strong attention to detail **EDUCATION** High school diploma or GED required. Associates Degree or Bachelor's degree preferred. Manufacturing, or experience in pharmaceuticals/biologics processing in a GMP environment is preferred. **EXPERIENCE** 1-2 years' experience in a manufacturing environment preferred. **SKILLS & ABILITIES** Accurate documentation and attention to detail oriented. Usage of a 10-key calculator. **OCCUPATIONAL DEMANDS** Ability to lift/push 50 lbs. All work is performed in a clean room (sanitized) manufacturing environment and must gown up. Must be able to work in a cold environment, job requires bending or standing for prolonged periods. This is accurate at the date of publication. It is intended to provide information essential to understanding the scope and general nature of the work performed by job holders within this position. This job description is not intended to be an exhaustive list of qualifications, skills, duties, responsibilities or working conditions associated with the position. Other duties may be assigned. _EEO Minorities/Females/Disability/Veterans_ **BENEFITS** + The estimated pay scale for the Manufacturing Technician I role based in Vista, CA is $21.51 - $32.26/hour depending on experience + Additionally, the position is eligible to participate in up to 5% of the company bonus pool + We offer a wide variety of benefits including, but not limited to: Medical, Dental, Vision, PTO, up to 5% 401(K) match and tuition reimbursement + Final compensation packages will ultimately depend on education, experience, skillset, knowledge, where the role is performed, internal equity and market data \#biomatusa Learn more about Grifols (************************************************* **Req ID:** 538071 **Type:** Regular Full-Time **Job Category:** MANUFACTURING

THE ROLE: Shift Supervisor * Travel Requirement: None * FLSA Status: Non-Exempt * Shift: 2nd shift 3:00PM to 11:30PM * Employment Category: Full Time - Regular * Pay Range: $21.00 to $25.00/hr. Generous Brands is dedicated to inspiring people to thrive through the power of vibrant nutrition through its leading brands, Bolthouse Farms, Health-Ade, and Evolution Fresh. Generous Brands partners with SAMBAZON to manufacture, distribute and sell SAMBAZON branded beverages. Bolthouse Farms is a pre-eminent provider of chilled juice, smoothies, shakes, and protein drinks. Health-Ade is the fastest growing kombucha brand, dedicated to creating bubbly beverages that boost gut health. Evolution Fresh is a premier cold-pressed juice brand with national availability. And, SAMBAZON beverages bottle the superfruit power of acaí in juice and natural energy cans. The company operates its North American business from facilities in Southern California, and the Greater Chicago Area. To learn more, please visit *********************** WHAT YOU'LL BE RESPONSIBLE FOR IN THIS ROLE This position contributes to Evolution Fresh success by supporting and operating product packaging equipment in a juicing plant. Models and acts in accordance with Evolution Fresh guiding principles * Operates and maintains downstream secondary equipment * Replenishes raw materials on automated packaging equipment * Responds to stoppages on secondary packaging equipment and conducts troubleshooting, jam clearing and Cleaning * Performs changeovers on secondary packaging equipment and assists machine operator with changeover on primary packaging equipment * Responsible for quality checks on secondary packages, including lot coding and aesthetics * Assists machine operator with quality checks on primary packages, including lot coding, aesthetics, and seal Integrity * Tracks output from the palletizing equipment and responds to jams * Operates the supersack loading station * Demonstrates and understands safety as a core value and follows the key essentials to safety as set forth by our safety resolution; reinforces and coaches others to do the same * Understands and follows established safety guidelines, consistently complies with all safety procedures (e.g. PPE, Lock Out Tag Out) * Supports food safety, legality and quality programs * Maintains product quality through adherence to good manufacturing practices, Food Safety Preventative Controls, product specifications and quality procedures. Monitors and documents quality measures using analytical tools * Performs other duties as needed in support of business objectives and Evolution Fresh Mission & Values * Maintains regular and consistent attendance and punctuality WHAT WE'RE LOOKING FOR MINIMUM QUALIFICATIONS: * High School diploma/GED or equivalent experience * Production or distribution environment (1 year) * Operation of manual and automated packaging equipment (1 year) ADDITIONAL REQUIRED QUALIFICATIONS: * Basic math skills * Ability to follow verbal direction * Proficiency in Microsoft Windows and internet environments * Mechanical aptitude to make minor machine adjustments and clear jams in equipment * Ability to perform quality tests using analytical tools * Ability to gather, record on operational and quality metrics, through manual or automated systems * Ability to understand written policies and guidelines, specifications, and safety standards * Ability to work with a diverse team environment * Ability to work in accordance with safety, quality and sanitation standards, policies, and procedures * Ability to work variable shifts to support business needs PREFERRED QUALIFICATIONS: * Experience performing quality tests using analytical tools * Troubleshooting skills * Familiarity with food safety regulatory requirements and global standards including Preventive Controls for Human Food (FDA Code of Federal Regulations) and the Global Food Safety Initiative (GFSI). Experience with the GFSI certification schemes (i.e. BRC and/or or SQF) PHYSICAL DEMANDS: * O = Occasional (up to 25% of time) * F = Frequent (26%-74% of time) * C = Constant (75% or more of time) WHAT WE OFFER plus more! Our rich benefits packages are designed to support the health and well-being of both our eligible team members and families. * Medical, Dental & Vision * Group Life and AD&D * Voluntary Life and AD&D * Group Short & Long-Term Disability * 401(k) * Paid Time Off * Flexible Spending Accounts * Employee Assistance Program * Gym Membership Discounts EQUAL EMPLOYMENT OPPORTUNITY We are an equal opportunity employer committed to fostering a culturally diverse organization. We strive for inclusiveness and a workplace where mutual respect is paramount. We encourage applications from a diverse pool of candidates, and all qualified applicants will receive consideration for employment without regard to race, color, ethnicity, religion, sex, age, national origin, disability, sexual orientation, gender identity and expression, or veteran status. We will provide reasonable accommodation for qualified individuals with disabilities, as needed, to assist them in performing essential job functions. REASONABLE ACCOMMODATIONS Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. If you are interested in applying for employment with Generous Brands and need special assistance to apply for a posted position, or if you believe you do not meet any of the required qualifications of a posted position due to a protected disability and would like to explore the possibility of an accommodation, please contact our Talent Acquisition team at *******************************. RECRUITMENT AGENCIES: Generous Brands does not accept unsolicited agency resumes. Generous Brands is not responsible for any fees related to unsolicited resumes. #LI-CG1 2nd shift 3:00PM to 11:30PM

Job Description Qualifications: This site uses Kronos for timekeeping. Manufacturing Forklift experience Packaging Responsibilities: Manufacturing Forklift experience Packaging Comments/Special Instructions What is the working schedule for this position - 1st shift, 6:00 AM - 2:30 PM What experiences/skills would stand out on a resume for this position (Must haves VS Nice to have) - We would like someone with prior manufacturing experience. Will there be a possibility of an extension for this role or is this a temp- to -perm - There may be an opportunity to hire permanently for this role. Will Overtime be offered - We may have OT as well. What would the interview process look like (in-person or teams, will there be a 2nd interview) - In-person interview Does the worker need to come with PPE, or will it be provided if required if needed - We will provide the PPE\'s, but the worker needs to have steel toed boots. Is the facility a temperature-controlled environment - Yes.

Job Title: Manufacturing Technician For immediate consideration, please apply directly to this job posting AND email me at ayami @actalentservices.com with the following: 1) Word copy of resume 2) 2-3 professional references 3) 4-5 brief bullet points highlighting technical qualifications Job Description Join our team as a Manufacturing Technician, where you will perform moderate to complex assembly functions using mechanical skills, a variety of hand tools, and assembly fixtures. You will produce and inspect assemblies to ensure they conform to product specifications while fully adhering to our established Quality System and understanding GMP. Ensuring complete documentation of all assembly and test processes is a crucial part of this role. Responsibilities * Perform moderate to complex assembly functions using mechanical skills and hand tools. * Produce and inspect assemblies to ensure they meet product specifications. * Adhere to the established Quality System and fully understand GMP. * Document all assembly and test processes accurately. * Troubleshoot and resolve issues in the assembly process. Essential Skills * Experience in electro-mechanical assembly and prototype assembly. * Ability to read and interpret blueprints and engineering drawings. * Proficiency in using basic computer applications including MS Word and MS Excel. * Strong organizational skills with the ability to maintain orderly work cells. * Experience in a medical device or aerospace manufacturing environment is preferred. Additional Skills & Qualifications * 1-4 years' experience in the assembly of electromechanical or electro-pneumatical systems. * Understanding of quality management systems and document control. * Experience with test engineering, troubleshooting, and R&D. Work Environment Our work environment is supportive and collaborative, with a family-oriented culture. The role is based on the production/manufacturing floor, with hours from Monday to Friday, 6:00am to 2:30pm, with overtime as needed. Employees are cross-trained across three production lines with several stations, each equipped with a touchscreen. This is a long-term, direct hire opportunity with the chance to be involved in products that improve and save lives. Job Type & Location This is a Permanent position based out of Santa Ana, CA. Pay and Benefits The pay range for this position is $47840.00 - $54080.00/yr. 3% Annual Bonus (base salary) Personal and Company Performance • Medical, Dental, and Vision (effective 1st of the month following start date) • 401k Participation with up to 3% company match (eligible 30 days following start date) • 2 weeks accrued Vacation a year* • 10 days accrued Sick Leave a year* • 10 Federal Holidays Observed a year • 1 Floating Holiday a year Workplace Type This is a fully onsite position in Santa Ana,CA. Application Deadline This position is anticipated to close on Jan 31, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

THE ROLE: Shift Supervisor Travel Requirement: None FLSA Status: Non-Exempt Shift: 2nd shift 3:00PM to 11:30PM Employment Category: Full Time - Regular Pay Range: $21.00 to $25.00/hr. Generous Brands is dedicated to inspiring people to thrive through the power of vibrant nutrition through its leading brands, Bolthouse Farms, Health-Ade, and Evolution Fresh. Generous Brands partners with SAMBAZON to manufacture, distribute and sell SAMBAZON branded beverages. Bolthouse Farms is a pre-eminent provider of chilled juice, smoothies, shakes, and protein drinks. Health-Ade is the fastest growing kombucha brand, dedicated to creating bubbly beverages that boost gut health. Evolution Fresh is a premier cold-pressed juice brand with national availability. And, SAMBAZON beverages bottle the superfruit power of acaí in juice and natural energy cans. The company operates its North American business from facilities in Southern California, and the Greater Chicago Area. To learn more, please visit *********************** WHAT YOU'LL BE RESPONSIBLE FOR IN THIS ROLE This position contributes to Evolution Fresh success by supporting and operating product packaging equipment in a juicing plant. Models and acts in accordance with Evolution Fresh guiding principles Operates and maintains downstream secondary equipment Replenishes raw materials on automated packaging equipment Responds to stoppages on secondary packaging equipment and conducts troubleshooting, jam clearing and Cleaning Performs changeovers on secondary packaging equipment and assists machine operator with changeover on primary packaging equipment Responsible for quality checks on secondary packages, including lot coding and aesthetics Assists machine operator with quality checks on primary packages, including lot coding, aesthetics, and seal Integrity Tracks output from the palletizing equipment and responds to jams Operates the supersack loading station Demonstrates and understands safety as a core value and follows the key essentials to safety as set forth by our safety resolution; reinforces and coaches others to do the same Understands and follows established safety guidelines, consistently complies with all safety procedures (e.g. PPE, Lock Out Tag Out) Supports food safety, legality and quality programs Maintains product quality through adherence to good manufacturing practices, Food Safety Preventative Controls, product specifications and quality procedures. Monitors and documents quality measures using analytical tools Performs other duties as needed in support of business objectives and Evolution Fresh Mission & Values Maintains regular and consistent attendance and punctuality WHAT WE'RE LOOKING FOR MINIMUM QUALIFICATIONS: High School diploma/GED or equivalent experience Production or distribution environment (1 year) Operation of manual and automated packaging equipment (1 year) ADDITIONAL REQUIRED QUALIFICATIONS: Basic math skills Ability to follow verbal direction Proficiency in Microsoft Windows and internet environments Mechanical aptitude to make minor machine adjustments and clear jams in equipment Ability to perform quality tests using analytical tools Ability to gather, record on operational and quality metrics, through manual or automated systems Ability to understand written policies and guidelines, specifications, and safety standards Ability to work with a diverse team environment Ability to work in accordance with safety, quality and sanitation standards, policies, and procedures Ability to work variable shifts to support business needs PREFERRED QUALIFICATIONS: Experience performing quality tests using analytical tools Troubleshooting skills Familiarity with food safety regulatory requirements and global standards including Preventive Controls for Human Food (FDA Code of Federal Regulations) and the Global Food Safety Initiative (GFSI). Experience with the GFSI certification schemes (i.e. BRC and/or or SQF) PHYSICAL DEMANDS: O = Occasional (up to 25% of time) F = Frequent (26%-74% of time) C = Constant (75% or more of time) WHAT WE OFFER plus more ! Our rich benefits packages are designed to support the health and well-being of both our eligible team members and families. Medical, Dental & Vision Group Life and AD&D Voluntary Life and AD&D Group Short & Long-Term Disability 401(k) Paid Time Off Flexible Spending Accounts Employee Assistance Program Gym Membership Discounts EQUAL EMPLOYMENT OPPORTUNITY We are an equal opportunity employer committed to fostering a culturally diverse organization. We strive for inclusiveness and a workplace where mutual respect is paramount. We encourage applications from a diverse pool of candidates, and all qualified applicants will receive consideration for employment without regard to race, color, ethnicity, religion, sex, age, national origin, disability, sexual orientation, gender identity and expression, or veteran status. We will provide reasonable accommodation for qualified individuals with disabilities, as needed, to assist them in performing essential job functions. REASONABLE ACCOMMODATIONS Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. If you are interested in applying for employment with Generous Brands and need special assistance to apply for a posted position, or if you believe you do not meet any of the required qualifications of a posted position due to a protected disability and would like to explore the possibility of an accommodation, please contact our Talent Acquisition team at *******************************. RECRUITMENT AGENCIES: Generous Brands does not accept unsolicited agency resumes. Generous Brands is not responsible for any fees related to unsolicited resumes. #LI-CG1 2nd shift 3:00PM to 11:30PM

ABBA Roller is seeking a Wheel Builder who is skilled and detail-oriented with a passion for precision and craftsmanship. The ideal candidate will be responsible for assembling and building rubber wheels, ensuring they meet quality standards and specifications. The Wheel Builder will work closely with various types of hubs to create durable and high-performance wheels. This role requires a strong understanding of wheel-building techniques, attention to detail, and the ability to work efficiently in a fast-paced environment. About ABBA: ABBA Roller specializes in high-performance urethane rollers and custom elastomer solutions for industrial and commercial applications. Our team supports customers across diverse industries with durable, precision-engineered products. We value hands-on problem solving, craftsmanship, and a workplace where expertise and teamwork drive every success. ESSENTIAL DUTIES AND RESPONSIBILITIES: Use precision measuring instruments such as calipers, micrometers, and gauges to ensure accuracy of dimensions. Maintains a safe, clean, organized work area. Additional responsibilities as assigned by management. Collaborate with other team members to ensure seamless integration with the overall product. Select, align and secure holding fixtures, cutting tools, attachments, accessories and materials on machines. Perform quality work checks to ensure the product meets quality standards, using inspection tools and devices. QUALIFICATIONS: 1-3 years of similar experience 1-3 years of experience with grinding and polish rubber machines, calipers, micrometers. DESIRED SKILLS: Detail-oriented with a focus on precision and quality. Ability to work efficiently in a fast-paced environment. Excellent problem-solving skills. Good communication and collaboration skills. Familiarity with safety guidelines and protocols. Crane Operator EDUCATION, EXPERIENCE, KNOWLEDGE: High School degree or GED equivalent Minimum of 2 years in similar field or with machine experience PHYSICAL REQUIREMENTS: Ability to lift and manipulate 40 lbs. Excellent close and distant vision. Ability to stand 8 hours plus per workday. Benefits: At ABBA Roller, we recognize how important your career and benefits are to you and your family. We offer a full suite of benefits, including medical, dental, vision, short and long-term disability coverage, accident insurance, critical illness insurance, basic and supplemental life insurance, employee assistance plan, retirement savings and matching, and other developmental opportunities. We are committed to supporting the way you live and work. ABBA Roller is an Equal Opportunity Employer Veterans/Disabled - Affirmative Action Employer. This position requires using information subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. (Actual placement within the salary range is dependent on multiple factors, including but not limited to skills, education, experience and location)

Job Description ABBA Roller is seeking a Wheel Builder who is skilled and detail-oriented with a passion for precision and craftsmanship. The ideal candidate will be responsible for assembling and building rubber wheels, ensuring they meet quality standards and specifications. The Wheel Builder will work closely with various types of hubs to create durable and high-performance wheels. This role requires a strong understanding of wheel-building techniques, attention to detail, and the ability to work efficiently in a fast-paced environment. About ABBA: ABBA Roller specializes in high-performance urethane rollers and custom elastomer solutions for industrial and commercial applications. Our team supports customers across diverse industries with durable, precision-engineered products. We value hands-on problem solving, craftsmanship, and a workplace where expertise and teamwork drive every success. ESSENTIAL DUTIES AND RESPONSIBILITIES: Use precision measuring instruments such as calipers, micrometers, and gauges to ensure accuracy of dimensions. Maintains a safe, clean, organized work area. Additional responsibilities as assigned by management. Collaborate with other team members to ensure seamless integration with the overall product. Select, align and secure holding fixtures, cutting tools, attachments, accessories and materials on machines. Perform quality work checks to ensure the product meets quality standards, using inspection tools and devices. QUALIFICATIONS: 1-3 years of similar experience 1-3 years of experience with grinding and polish rubber machines, calipers, micrometers. DESIRED SKILLS: Detail-oriented with a focus on precision and quality. Ability to work efficiently in a fast-paced environment. Excellent problem-solving skills. Good communication and collaboration skills. Familiarity with safety guidelines and protocols. Crane Operator EDUCATION, EXPERIENCE, KNOWLEDGE: High School degree or GED equivalent Minimum of 2 years in similar field or with machine experience PHYSICAL REQUIREMENTS: Ability to lift and manipulate 40 lbs. Excellent close and distant vision. Ability to stand 8 hours plus per workday. Benefits: At ABBA Roller, we recognize how important your career and benefits are to you and your family. We offer a full suite of benefits, including medical, dental, vision, short and long-term disability coverage, accident insurance, critical illness insurance, basic and supplemental life insurance, employee assistance plan, retirement savings and matching, and other developmental opportunities. We are committed to supporting the way you live and work. ABBA Roller is an Equal Opportunity Employer Veterans/Disabled - Affirmative Action Employer. This position requires using information subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. (Actual placement within the salary range is dependent on multiple factors, including but not limited to skills, education, experience and location)

Argonaut Manufacturing Services Inc. is a contract manufacturing organization (CMO) headquartered in Carlsbad, CA with over 100,000 square feet of manufacturing space across four locations. The company is dedicated to serving highly innovative companies in the biopharmaceutical and molecular diagnostics industries. Argonaut is a full service, cost-effective partner, providing complete solutions in the areas of formulation, filling and final kitting of reagents and consumables. Argonaut provides quality and regulatory expertise to assure the highest in quality manufacturing and supply chain excellence. Benefits and Pay Range Pay range for this position is $20.00 - $26.00 per hour, depending on experience. Factors which may affect starting pay within this range may include geography/market, skills, education, experience, and other qualifications of the successful candidate. This is a temp to hire position. Position Overview The Manufacturing Technician II/III is responsible for executing all processes in production while strictly adhering to cGMP, environmental health and safety guidelines and any other related regulations which could apply. Under the general direction of the lead technician and the overall direction of the supervisor, this position shall be responsible for the hands-on execution of all activities in the production area. The Manufacturing Technician is expected to fully participate in both departmental projects and any quality working teams which may be applicable. existing procedures. All of the specific requirements presented in this job description are applicable to the functional area in which it resides. This role is 100% On-Site, Monday - Friday 8 hours/day (excluding lunch break). Overtime, weekends and holidays may be required. Start time for this position is 6:00 am with a consistent schedule. Exceptions to the schedule must be approved by the manager in advance. Responsibilities and Duties Ability to work within an ISO 13485 and cGMP production environment and ensure compliance with our quality system. Execute documentation based on cGMP and GDP procedures, as well as perform documentation review post manufacturing execution. Participate in Quality Working Teams and Continuous Improvement Teams. Visual inspection of lyophilized product and heat seals of packaging. Clean and sanitize manufacturing and associated support areas. Responsible for monitoring machinery and reporting alarms to lead technician or Supervisor. Conduct daily documentation review. Participate in Quality Working Teams and Continuous Improvement Teams. Operate large machinery and monitor automated. Employee may be required to manage hazardous wastes in compliance with company procedures & State/Federal/Local hazardous waste regulations. Duties may include identifying, handling, generating, accumulating, storing, labeling, and on-site transporting of hazardous wastes. Perform daily arithmetic calculations as it pertains to total volume and liquid concentrations. Perform daily unit conversions as it pertains to gravimetric and volumetric measurements. Operate production equipment such as pipettes, balances, pH meter and heat sealers. Monitor department equipment for proper operation that is within calibration. May perform safety and cGMP inspections or observations. Ensure compliance with SOP/cGMP and cGDP requirements. Assist in training/ leading of new team members in production activities. Assist in updating and new revision of standard operating procedures (SOP). May need to be an author for any MFG Non-Conformance Reports (NCR) and risk analysis memos. Receive and distribute supplies into the production area as necessary. Perform NetSuite transaction, issue material, completion and closing of work orders. May assist with review of quality assurance logbooks. May perform other duties as assigned. Education Requirements Level II Bachelor's degree in a related field (Biotechnology, Molecular Biology, or Biochemistry) with at least 1 year of work experience at Argonaut or in manufacturing within a cGMP environment; Associate's degree in a related field; or High school diploma/equivalent with 3+ years of related manufacturing experience in a cGMP environment. Level III Bachelor's degree in a related field (Biotechnology, Molecular Biology, or Biochemistry) with 2+ years of work experience at Argonaut or in manufacturing within a cGMP environment; Associate's degree in a related field with 3+ years of related experience; or High school diploma/equivalent with 5+ years of related manufacturing experience in a cGMP environment. Required Skills and Knowledge Punctuality and reliable attendance required. Ability to read and follow detailed written instructions; strong verbal and written communication skills. Proficient in reading, writing, and conversing in English to understand cGMP manufacturing processes and SOPs. Knowledge of manufacturing production processes related to product integrity, including visual inspection of components and finished goods, manual and semi-automated packaging, and product labeling. Understanding of basic chemical and biological safety procedures. Basic knowledge of formulation, filling, and kitting operations and capabilities. Argonaut Manufacturing Services, Inc. is proud to be an equal opportunity employer committed to providing employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age or disability, or any other class protected by Federal, State or local laws. Argonaut complies will all employment eligibility verification requirements of the Immigration and Nationality Act and all must have the authorization to work in the US.

Zymo Research is actively searching for a dynamic Lab Technician to become an integral part of our Protein Team. In this role, you will collaborate closely with R&D team members, manufacturing, and operations staff to ensure the prompt delivery of protein products meets the highest quality standards. As a Lab Technician, your primary responsibility will be the production of recombinant proteins and enzymes, strictly adhering to Standard Operating Procedures (SOPs). Your duties will extend to maintaining workspaces at a consistently high level of inspection readiness and utilizing business systems for effective inventory and process management. Additionally, you will meticulously maintain records to ensure compliance with regulatory requirements. If you are a highly motivated individual with a passion for precision and quality in biotech manufacturing, we invite you to join our dedicated team. Join us in making a meaningful impact! Essential Duties and Responsibilities: · Upstream Manufacturing: Execute sterilization processes and operation of media preparation, fermentation, and harvest operations. · Downstream Manufacturing: Conduct the protein purification process, encompassing tasks such as dialysis, filtration, diafiltration, large-scale buffer preparation, centrifugation, and chromatography. · Ensure the cleanliness and maintenance of all equipment, instruments, glassware, and materials. · Assemble and prepare equipment and materials for the production process. · Adhere to Standard Operating Procedures (SOPs) and maintain comprehensive manufacturing documentation. · Demonstrate effective and professional communication skills while working collaboratively in a team environment. Education and Experience: · Required: High School Diploma · Desirable but not required: Bachelor's degree in biology, Biochemistry, Biomedical Engineering, or relevant work experience in the biotech field. · Strong oral and written communication skills. · Proficiency in computer-based systems. · Desirable experience in creating and revising SOPs and Manufacturing Formulas. · Flexibility to work weekends, off-shifts, and overtime as needed. · Comfort working with pressurized tanks, housings, and equipment connected by piping, pumps, and serviced by pressurized steam, water, air, and cleaning/sanitizing chemical systems. · Expected to be on feet, standing, or walking for up to 90% each day. · Capability to push, pull, or lift materials weighing up to 50 lbs. · Proficiency in troubleshooting or manipulating process equipment, connections, and raw materials. About Us: Since its inception in 1994, Zymo Research has been proudly serving the scientific community by providing innovative, reliable, and high-quality research tools and products. Whether it's DNA, RNA, epigenetics, microbiomics, protein, or yeast-based research, our philosophy remains the same: To provide the highest quality products in the industry while ensuring they are both simple to use and reliable in their performance. Recognized as a Top Workplace by the Orange County Register in 2021, 2022, and named a Top Workplace USA in 2023, Zymo Research continues to be a vibrant community where employees thrive, feel connected, and are inspired by their work. If you are passionate about contributing to scientific advancement and want to be part of an exceptional team in a dynamic, growing company, we'd love to hear from you! Compensation, Benefits, and Perks: The estimated base compensation range for this position is $20 to $25 per hour at the time of posting. Actual compensation details will be provided in writing at the time of offer, if applicable, and is based on several factors we believe fairly and accurately impact compensation, including geographic location, experience, knowledge, skills, abilities, and other job permitted factors. Zymo Research also offers competitive benefits and perks including: Medical, Dental, Vision, and Life Insurance Coverages EAP Sessions Vacation Time plus Company Holidays Paid Sick Leave Generous 401(K) with matching Employee Referral Bonus Complimentary fruit, snacks, and beverages Complimentary catered lunches on Thursdays Complimentary EV Charging Equal Employment Opportunity Employer: Zymo Research welcomes candidates of all backgrounds. These include sex, age, color, race, religion, marital status, national origin, ancestry, sexual orientation, gender, gender identity, gender expression, physical & mental disability, medical condition, genetic information, military and veteran status, or any other protected status as defined by federal, state, or local law. Location: Onsite - Zymo Research Operations - 2961 Dow Ave. Tustin, CA 92780 Disclaimer: At Zymo, we take the integrity of our hiring process seriously. Please be aware of fraudulent recruitment activities that may use our name to deceive job seekers. We will never ask for payment, sensitive personal information, or financial details during the recruitment process. All legitimate communications will come from an official Zymo or TriNet Hiring email address. If you are contacted by anyone claiming to represent us using a free email service (e.g., Gmail, Yahoo, Hotmail) or asking for payment, please treat this as fraudulent and report it immediately to *******************

Job Purpose Under general supervision, an assembler assembles components efficiently, safely and within budget. Key Responsibilities · Assemble components with the use of drawings, schematics or written work instructions. Work may include fitting or soldering parts together. Some assemblies require the use of adhesives and epoxies · Subassemblies or finished products in a manufacturing environment. Perform tests on electrical assemblies during the production process · Operate various power tools and occasional use of drill press · Loads and unloads signs · Completes daily time-ticket · Clean and maintain work area and equipment to provide a safe and organized work environment · Work safely to prevent on the job injuries following all safety regulations; including PPE (safety glasses, safety shoes, and on occasion gloves, dusk mask, or job specific safety equipment) · Interacts with other departments · Performs other related duties as assigned by management Skills Qualifications · Ability to deal effectively and tactfully with a wide variety of individuals in person · Ability to organize, prioritize and coordinate multiple work activities to meet critical deadlines, as well as working independently · Solid basic math skills · Strong work ethic with an enthusiastic, positive attitude, and the highest level of integrity · Good communication skills in order to receive and follow instructions and communicate to others necessary information pertaining to the production of signs · Maintain regular and timely attendance Education/Training/Experience · High School Diploma or GED · 1-2 years assembly experience preferred Note - Other duties, responsibilities and activities may change or be assigned at any time with or without notice. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. PHYSICAL/MENTAL DEMANDS AND WORK ENVIRONMENT: The physical and mental demands described here are representative of those that must be met by employees to successfully perform the essential functions of this class. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands Work is generally performed in a shop environment. While performing the duties of this class, the employee is regularly required to sit, walk, talk or hear in person, climb or balance; stoop, push, kneel, or crouch; smell; use hands and fingers to handle, feel or operate objects, tools or controls; and reach with hands or arms. The employee is often required to stand. Employees must frequently lift and/or move up to 50 pounds; occasionally up to 75 pounds and stand for full 8 + hour shift. Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception and the ability to adjust focus. Work Environment The employee frequently works near moving mechanical parts, is exposed to cold or humid conditions and vibration. The employee is occasionally exposed to Epoxy, Silicone, Caulk, and Super Glue. The noise level in the work environment is frequently loud. We are an E-Verify employer. We conduct background and drug tests upon hire.

We are hiring a Powder Formulation Technician. The Powder Formulation Technician will be responsible for formulation of powdered media. 3rd shift - 9PM - 5:30AM At FUJIFILM Biosciences, we turn curiosity into breakthroughs that advance the field of life sciences. By offering a comprehensive portfolio of products and services in cell culture media, discovery research reagents, recombinant growth factors and proteins, fine chemicals, and critical assay materials, we partner with the brightest minds in biotech and pharma to tackle the world's biggest health challenges. Imagine being part of a team that enables life-changing discoveries like new vaccines, therapies, and advancements in regenerative medicine. Our culture fosters curiosity, collaboration, and innovation, and we pride ourselves on delivering unparalleled quality and service to our partners. If you're ready to make an impact, your future belongs with us at FUJIFILM Biosciences. Our headquarters in Santa Ana, California, is surrounded by world-class schools, lush parks, and scenic beaches like Laguna and Huntington, making it an ideal place to live, work, and explore. With additional campuses across the US, Europe, China, and Japan, we offer opportunities to make a difference worldwide. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of "giving our world more smiles." Visit: *************************************************** Job Description Responsibilities: * Formulates Powder media formulas per manufacturing protocols utilizing various weighing equipment such as scales and balance. * Uses Mettler-Toledo IND780 terminal system in conjunction with the SAP ERP system to ensure correct raw materials assigned in the batch record are weighed at the specified quantity. * Suggest changes in departmental procedures and processes (SOPs) as needed. * Performs and documents line clearance at the start of each formulation event. * Maintains all required logs and associated documentation. * Assures that all chemicals are stored and labeled properly. * Performs process scale checks on all required equipment including scales and balances. * Keeps work area, utensils, tanks, mills, and equipment clean and organized. * Ensures that supplies needed such as weigh boats, gloves, lab coats, etc. are well stocked in their designated areas. Orders supplies or informs Lead/Supervisor if supplies need to be ordered. * Follows all safety procedures and works in a safe manner including wearing all required personal protective equipment. * Understands and follows procedures to ensure that chemicals are handled properly. * Good understanding of metric system and its conversions. * Follows and actively participates in sustaining the 6S program in the area. * Other duties as requested by Lead or Supervisor. Required Skills/Education: * High School Diploma or equivalent. * Good work history. * Background in medical devices, diagnostics, food/vitamin processing, or pharmaceuticals. * 1-2 years of hands on experience * General education about chemicals and proper handling (college level science preferred). * Working knowledge of metric system. * Good understanding of current Good Manufacturing Practices (cGMPs). * Ability to speak, read, and write English. * Good oral and written communication skills. Salary and Benefits: * For California, the base salary range for this position is $19.65 - $25.51 per hour. Compensation for the successful candidate will depend on various factors (e.g., qualifications, education, prior experience, location, etc.). * Medical, Dental, Vision * Life Insurance * 401k * Paid Time Off * #LI-onsite EEO Information Fujifilm is committed to providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc. ADA Information If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (*****************).

We are hiring a Powder Formulation Technician. The Powder Formulation Technician will be responsible for formulation of powdered media. 3rd shift - 9PM - 5:30AM At FUJIFILM Biosciences, we turn curiosity into breakthroughs that advance the field of life sciences. By offering a comprehensive portfolio of products and services in cell culture media, discovery research reagents, recombinant growth factors and proteins, fine chemicals, and critical assay materials, we partner with the brightest minds in biotech and pharma to tackle the world's biggest health challenges. Imagine being part of a team that enables life-changing discoveries like new vaccines, therapies, and advancements in regenerative medicine. Our culture fosters curiosity, collaboration, and innovation, and we pride ourselves on delivering unparalleled quality and service to our partners. If you're ready to make an impact, your future belongs with us at FUJIFILM Biosciences. Our headquarters in Santa Ana, California, is surrounded by world-class schools, lush parks, and scenic beaches like Laguna and Huntington, making it an ideal place to live, work, and explore. With additional campuses across the US, Europe, China, and Japan, we offer opportunities to make a difference worldwide. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of “giving our world more smiles.” Visit: *************************************************** Job Description Responsibilities: Formulates Powder media formulas per manufacturing protocols utilizing various weighing equipment such as scales and balance. Uses Mettler-Toledo IND780 terminal system in conjunction with the SAP ERP system to ensure correct raw materials assigned in the batch record are weighed at the specified quantity. Suggest changes in departmental procedures and processes (SOPs) as needed. Performs and documents line clearance at the start of each formulation event. Maintains all required logs and associated documentation. Assures that all chemicals are stored and labeled properly. Performs process scale checks on all required equipment including scales and balances. Keeps work area, utensils, tanks, mills, and equipment clean and organized. Ensures that supplies needed such as weigh boats, gloves, lab coats, etc. are well stocked in their designated areas. Orders supplies or informs Lead/Supervisor if supplies need to be ordered. Follows all safety procedures and works in a safe manner including wearing all required personal protective equipment. Understands and follows procedures to ensure that chemicals are handled properly. Good understanding of metric system and its conversions. Follows and actively participates in sustaining the 6S program in the area. Other duties as requested by Lead or Supervisor. Required Skills/Education: High School Diploma or equivalent. Good work history. Background in medical devices, diagnostics, food/vitamin processing, or pharmaceuticals. 1-2 years of hands on experience General education about chemicals and proper handling (college level science preferred). Working knowledge of metric system. Good understanding of current Good Manufacturing Practices (cGMPs). Ability to speak, read, and write English. Good oral and written communication skills. Salary and Benefits: For California, the base salary range for this position is $19.65 - $25.51 per hour. Compensation for the successful candidate will depend on various factors (e.g., qualifications, education, prior experience, location, etc.). Medical, Dental, Vision Life Insurance 401k Paid Time Off *#LI-onsite EEO Information Fujifilm is committed to providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc. ADA Information If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (*****************).

Manufacturing Technician / Engineering $25 - $35/hr Considering candidate with the following experience: Test/Automation/Mechanical Technician experience. IPC 610 - A - and/or IPC - A 620 Standards Experience with electrical and/or optical products and equipment. Contract to Hire, Conversion to permanent after 3 months. Benefits upon conversion! 3 week vacation 1st year 10 holidays 6 - ½ days off before the holiday 1 floating holiday Job Summary The Manufacturing Engineering Technician is responsible for providing support to the Process, Equipment and Automation Engineering teams. This role will help develop and optimize processes, create manufacturing documentation, assemble prototypes and equipment as well as aid in troubleshooting efforts for the engineering teams. Duties & Responsibilities Build, document, test, and repair product, fixtures, and/or equipment by following technical documentation. Maintain instruments and manufacturing equipment ensuring proper monitoring, compliance with calibration, and proper control of asset location. Fabricate custom wire harnesses for automation equipment, including cable preparation and termination by following technical drawings. Wire/install custom automation equipment based on drawing/schematics. Fabricate pneumatic assemblies for automation equipment and prototyping based on drawing/schematics. Develop Manufacturing Assembly Procedures and Work Instructions. Execute process development experiments, accurately log data, and organize results. Coordinate logistics for engineering tools and equipment between different sites. Request quote with vendors and order fixtures or equipment for duplication purposes. Identify and purchase of the shelf components needed for equipment/fixtures. Perform installation and adjustment of fixtures and equipment by following proper procedures. Order, receive, organize and maintain tools and standard hardware for manufacturing. Perform failure analysis testing on production and returned sensors (electrical test, teardown, X-Ray). Initiate and close production and engineering builds, along with all related paperwork. Set-up, program and maintain surface mount technology equipment. Quote and order supplies and consumables for laboratories (cleaning, masking, PPE, etc…) Maintain and promote 5S standards. Train manufacturing associates. Provide input to engineering staff for process, fixture & equipment improvements. Assist in prototype builds, such as 3D prints, testing, etc. Perform other duties as required. Minimum Qualifications CRM systems/ Salesforce Electronic Test/Automation/Mechanical Technician experience. Experience with electrical and/or optical products and equipment. Experience with Industrial Controls panel wiring, cable routing, crimping, termination, labeling, component layout, sensors, robotics, PLC wiring. Ability to read and understand schematics and mechanical drawings. Working knowledge of lab equipment (oscilloscopes, Multimeters, etc.) Working knowledge of metrology equipment (comparator, calipers, dial indicators, micrometers, pin gages, etc.) and able to perform measurements. Capability following and providing feedback on engineering procedures. Strong organizational skills as well as attention to detail. Ability to work well in team environment. Carry out small projects independently or complete assigned tasks for major product development efforts. Knowledge in cGMP requirements and preferably ISO 9000 requirements. Good communication skills, both verbal and written, with the ability to effectively interface with Research and Development, Quality Assurance, and Production teams. Experience with fabrication equipment (Mill, Lathe, 3D printers, drill press, chop saw, etc.) Excellent computer skills - CAD, word processing, and spreadsheets. Must be able to lift and carry up to 50 pounds. Education High School Diploma or G.E.D, associate degree or Certification in Electronics/Automation/Mechanical assembly preferred. #MS-OCENG

**Dreaming big is in our DNA. It's who we are as a company. It's our culture. It's our heritage. And more than ever, it's our future. A future where we're always looking forward. Always serving up new ways to meet life's moments. A future where we keep dreaming bigger. We look for people with passion, talent, and curiosity, and provide them with the teammates, resources and opportunities to unleash their full potential. The power we create together - when we combine your strengths with ours - is unstoppable. Are you ready to join a team that dreams as big as you do?** **SALARY:** $33.83/hr + 4.25 hours of daily OT **SHIFT:** 12 hours (rotating days/nights) every quarter **COMPANY:** Michelob ULTRA. Cutwater Spirits. Budweiser. Kona Brewing Co. Stella Artois. Bud Light. That's right, over 100 of America's most loved brands, to be exact. But there's so much more to us than our top-notch portfolio of beers, seltzers, and more. We are powered by a 19,000-strong team that shares our passion to create a future with more cheers. We look for people with talent, curiosity, and commitment and provide the teammates, resources and opportunities to unleash their full potential. The power we create together - when we combine your strengths with ours - is unstoppable. Are you ready to join a team that dreams as big as you do? **ROLE SUMMARY** **:** Sitting behind a desk all day was never your style. Rolling up your sleeves and solving tangible problems? That's more like it. If you are passionate about maintenance and troubleshooting while working in a fast paced environment, Anheuser-Busch could be your last stop in fulfilling your career. Our Maintenance Technicians are the key in guaranteeing that our quality is where it needs to be: the very best. If you are looking for a new challenge, come join our team today! As a Maintenance Technician, you will operate, maintain, troubleshoot, and repair high speed manufacturing equipment. You would also be responsible to perform quality checks by using powerful quality reporting systems. If you think you've got what it takes, we want to hear from you! **JOB R** **ESPONSIBILITIES** **:** + Operate, maintain troubleshoot and repair high speed manufacturing equipment + Responsible for prioritization of operation and maintenance on multiple pieces of manufacturing equipment + Perform quality checks and recording them in our automated quality control systems + Interpret data to make quality and productivity decisions, we're a data driven company + Perform routine and emergency maintenance on process equipment + Maintain our work area in accordance with all sanitation and housekeeping standards, safety is our first priority **JOB QUALIFICATIONS** **:** + High School Diploma or GED + 1-3 years of industrial experience, preferably in a high-speed manufacturing or packaging environment + Proficient in mechanical troubleshooting + Able and willing to work a rotating 12-hour and other alternate work schedule, including day and night shift rotations, and required weekend and holiday hours + Able and willing to work mandatory overtime as required + Superior work history, including good attendance + Knowledge of safety policies and procedures **WHY ANHEUSER-BUSCH:** At Anheuser-Busch, our purpose is to create a future with more cheers. For more than 165 years, we have delivered a legacy of brewing great-tasting, high-quality beers that have satisfied beer drinkers for generations. 99 percent of the products we sell in the U.S are made in the U.S. with more than $700 million in high-quality ingredients sourced from American farmers and more than $7 billion in goods and services purchased from U.S. suppliers, and we have invested nearly $2 billion in our 100 facilities across the country over the past five years. Through these investments, and as a leading American manufacturer and the nation's top brewer, we drive economic prosperity nationwide through investments in our people, facilities, and communities. We are the only brewer that invests in the U.S. at this scale. **B** **ENEFITS** **:** + Health benefits including Medical, Dental, Vision, Wellness and Tax-Advantaged Savings and Spending Accounts + Life Insurance and Disability Income Protection + 401(k) Retirement Savings options with a company matching contribution + Chance to work in a fast-paced environment among a company of owners + Free Beer! \#AC-E **WHY ANHEUSER-BUSCH:** Anheuser-Busch is here for the times that matter. The moments where we celebrate, defy challenges, dream of the brighter future we are building today- and all the moments in between. We are a company that brings people together for richer conversations, sweeter celebrations and stronger communities. As the leading global brewer, Anheuser-Busch InBev is committed to finding innovative ways to continually improve. It's this kind of thinking that creates a unique work environment by rewarding talent and encouraging forward thinking. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability status or any other characteristic protected by applicable law. **REQUIRE ADDITIONAL ASSISTANCE?** Anheuser-Busch is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you are a qualified individual with a disability, or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access the Anheuser-Busch Careers website as a result of your disability. We will make a determination on your request for reasonable accommodation on a case-by-case basis. If you need an accommodation or assistance in using the Anheuser-Busch Careers website, please email disabilityaccommodation@anheuser-busch.com . _Disclaimer: Anheuser-Busch does not charge for any part of the hiring process. Additionally, the company will only share information via official channels including the company website and from Anheuser-Busch email accounts. If you have any questions or concerns, please email the Anheuser-Busch recruitment team at_ _***************************************_ _._ **CONTACT US (***************************************)** **EQUAL OPPORTUNITY EMPLOYER** **PRIVACY POLICY (***************************************************** **TERMS AND CONDITIONS** **PAY TRANSPARENCY POLICY STATEMENT (**********************************************************************************

THE ROLE: * Travel Requirement: None * FLSA Status: Non-Exempt * Shift: 3rd shift 11:00PM to 7:30AM * Employment Category: Full Time - Regular * Pay Range: $21.00 to $25.00/hr. Generous Brands is dedicated to inspiring people to thrive through the power of vibrant nutrition through its leading brands, Bolthouse Farms, Health-Ade, and Evolution Fresh. Generous Brands partners with SAMBAZON to manufacture, distribute and sell SAMBAZON branded beverages. Bolthouse Farms is a pre-eminent provider of chilled juice, smoothies, shakes, and protein drinks. Health-Ade is the fastest growing kombucha brand, dedicated to creating bubbly beverages that boost gut health. Evolution Fresh is a premier cold-pressed juice brand with national availability. And, SAMBAZON beverages bottle the superfruit power of acaí in juice and natural energy cans. The company operates its North American business from facilities in Southern California, and the Greater Chicago Area. To learn more, please visit *********************** WHAT YOU'LL BE RESPONSIBLE FOR IN THIS ROLE This position contributes to Evolution Fresh success by supporting and operating product packaging equipment in a juicing plant. Models and acts in accordance with Evolution Fresh guiding principles * Operates and maintains downstream secondary equipment * Replenishes raw materials on automated packaging equipment * Responds to stoppages on secondary packaging equipment and conducts troubleshooting, jam clearing and Cleaning * Performs changeovers on secondary packaging equipment and assists machine operator with changeover on primary packaging equipment * Responsible for quality checks on secondary packages, including lot coding and aesthetics * Assists machine operator with quality checks on primary packages, including lot coding, aesthetics, and seal Integrity * Tracks output from the palletizing equipment and responds to jams * Operates the supersack loading station * Demonstrates and understands safety as a core value and follows the key essentials to safety as set forth by our safety resolution; reinforces and coaches others to do the same * Understands and follows established safety guidelines, consistently complies with all safety procedures (e.g. PPE, Lock Out Tag Out) * Supports food safety, legality and quality programs * Maintains product quality through adherence to good manufacturing practices, Food Safety Preventative Controls, product specifications and quality procedures. Monitors and documents quality measures using analytical tools * Performs other duties as needed in support of business objectives and Evolution Fresh Mission & Values * Maintains regular and consistent attendance and punctuality WHAT WE'RE LOOKING FOR MINIMUM QUALIFICATIONS: * High School diploma/GED or equivalent experience * Production or distribution environment (1 year) * Operation of manual and automated packaging equipment (1 year) ADDITIONAL REQUIRED QUALIFICATIONS: * Basic math skills * Ability to follow verbal direction * Proficiency in Microsoft Windows and internet environments * Mechanical aptitude to make minor machine adjustments and clear jams in equipment * Ability to perform quality tests using analytical tools * Ability to gather, record on operational and quality metrics, through manual or automated systems * Ability to understand written policies and guidelines, specifications, and safety standards * Ability to work with a diverse team environment * Ability to work in accordance with safety, quality and sanitation standards, policies, and procedures * Ability to work variable shifts to support business needs PREFERRED QUALIFICATIONS: * Experience performing quality tests using analytical tools * Troubleshooting skills * Familiarity with food safety regulatory requirements and global standards including Preventive Controls for Human Food (FDA Code of Federal Regulations) and the Global Food Safety Initiative (GFSI). Experience with the GFSI certification schemes (i.e. BRC and/or or SQF) PHYSICAL DEMANDS: * O = Occasional (up to 25% of time) * F = Frequent (26%-74% of time) * C = Constant (75% or more of time) WHAT WE OFFER plus more! Our rich benefits packages are designed to support the health and well-being of both our eligible team members and families. * Medical, Dental & Vision * Group Life and AD&D * Voluntary Life and AD&D * Group Short & Long-Term Disability * 401(k) * Paid Time Off * Flexible Spending Accounts * Employee Assistance Program * Gym Membership Discounts EQUAL EMPLOYMENT OPPORTUNITY We are an equal opportunity employer committed to fostering a culturally diverse organization. We strive for inclusiveness and a workplace where mutual respect is paramount. We encourage applications from a diverse pool of candidates, and all qualified applicants will receive consideration for employment without regard to race, color, ethnicity, religion, sex, age, national origin, disability, sexual orientation, gender identity and expression, or veteran status. We will provide reasonable accommodation for qualified individuals with disabilities, as needed, to assist them in performing essential job functions. REASONABLE ACCOMMODATIONS Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. If you are interested in applying for employment with Generous Brands and need special assistance to apply for a posted position, or if you believe you do not meet any of the required qualifications of a posted position due to a protected disability and would like to explore the possibility of an accommodation, please contact our Talent Acquisition team at *******************************. RECRUITMENT AGENCIES: Generous Brands does not accept unsolicited agency resumes. Generous Brands is not responsible for any fees related to unsolicited resumes. #LI-CG1 3rd shift 11:00PM to 7:30AM

We are hiring a Powder Formulation Technician. The Powder Formulation Technician will be responsible for formulation of powdered media. 3rd Shift: 9:00 pm- 5:30 am At FUJIFILM Biosciences, we turn curiosity into breakthroughs that advance the field of life sciences. By offering a comprehensive portfolio of products and services in cell culture media, discovery research reagents, recombinant growth factors and proteins, fine chemicals, and critical assay materials, we partner with the brightest minds in biotech and pharma to tackle the world's biggest health challenges. Imagine being part of a team that enables life-changing discoveries like new vaccines, therapies, and advancements in regenerative medicine. Our culture fosters curiosity, collaboration, and innovation, and we pride ourselves on delivering unparalleled quality and service to our partners. If you're ready to make an impact, your future belongs with us at FUJIFILM Biosciences. Our headquarters in Santa Ana, California, is surrounded by world-class schools, lush parks, and scenic beaches like Laguna and Huntington, making it an ideal place to live, work, and explore. With additional campuses across the US, Europe, China, and Japan, we offer opportunities to make a difference worldwide. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of "giving our world more smiles." Visit: *************************************************** Job Description Responsibilities: * Formulates Powder media formulas per manufacturing protocols utilizing various weighing equipment such as scales and balance. * Uses Mettler-Toledo IND780 terminal system in conjunction with the SAP ERP system to ensure correct raw materials assigned in the batch record are weighed at the specified quantity. * Suggest changes in departmental procedures and processes (SOPs) as needed. * Performs and documents line clearance at the start of each formulation event. * Maintains all required logs and associated documentation. * Assures that all chemicals are stored and labeled properly. * Performs process scale checks on all required equipment including scales and balances. * Keeps work area, utensils, tanks, mills, and equipment clean and organized. * Ensures that supplies needed such as weigh boats, gloves, lab coats, etc. are well stocked in their designated areas. Orders supplies or informs Lead/Supervisor if supplies need to be ordered. * Follows all safety procedures and works in a safe manner including wearing all required personal protective equipment. * Understands and follows procedures to ensure that chemicals are handled properly. * Good understanding of metric system and its conversions. * Follows and actively participates in sustaining the 6S program in the area. * Other duties as requested by Lead or Supervisor. Required Skills/Education: * High School Diploma or equivalent. * Background in medical devices, diagnostics, food/vitamin processing, or pharmaceuticals. * 1-2 years of hands on experience * General education about chemicals and proper handling (college level science preferred). * Working knowledge of metric system. * Good understanding of current Good Manufacturing Practices (cGMPs). * Ability to speak, read, and write English. * Good oral and written communication skills. Salary and Benefits: * For California, the base salary range for this position is $19.65 - $25.51 per hour. Compensation for the successful candidate will depend on various factors (e.g., qualifications, education, prior experience, location, etc.). * Medical, Dental, Vision * Life Insurance * 401k * Paid Time Off * #LI-onsite EEO Information Fujifilm is committed to providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc. ADA Information If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (*****************).