Electrical Design Engineer jobs at ME Engineers

Electrical Engineer - MEP Nelson + Pope is seeking a qualified Electrical Engineer to work in the Mechanical Electrical Plumbing Department in our Melville, New York office for an immediate start. The work includes electrical design to support for new building construction and renovation projects, as well as lighting, utility and distributed energy projects. Responsibilities/Top Skills/Qualifications: support partners, project managers and senior technical staff preparation of permit, construction and bid documents proficient in AutoCad knowledge of Revit preferred site visits for field investigations and measurements shop drawing review detail oriented and commitment to producing high-quality work ability to work independently or in collaboration with a team proficient in Microsoft Office good communication, organizational & time management skills Nelson + Pope offers a competitive salary commensurate with level of education and professional experience and offers strong health, paid time off, work life balance, 401K, and other benefits. Extensive learning and educational work environment with strong day to day mentorship as well as formal training opportunities. Candidates must have a valid driver's license and be willing and able to commute to our Melville office for this on-site position (non-remote). Non-local candidates are encouraged to apply, and relocation assistance may be available where appropriate. The interview process is succinct. Nelson + Pope is proud to be an Equal Opportunity and Affirmative Action Employer. We evaluate qualified applicants without regard to race, color, national origin, religion, sex, sexual orientation, gender identity, disability, protected veteran status, and other statuses protected by law. In compliance with the Immigration Reform and Control Act of 1986, we will hire only U.S. citizens and aliens lawfully authorized to work in the United States (if the position is or will be one which is subject to U.S. law). Verification of employment eligibility will be required at the time of hire. Salary Range: $80K to $115K

Join our Digital Assets Engineering team to design, develop, and secure smart contracts powering tokenization, custody, and settlement solutions. You will work on cutting-edge blockchain integrations within a regulated financial environment, ensuring scalability, security, and compliance. We can facilitate w2 and corp-to-corp consultants. For our w2 consultants, we offer a great benefits package that includes Medical, Dental, and Vision benefits, 401k with company matching, and life insurance. Rate: $90 - $99 / hr. w2 Responsibilities • Design and implement secure, efficient smart contracts for tokenization and digital asset workflows • Collaborate with product and architecture teams to integrate contracts with EVM-compatible chains and enterprise systems • Conduct code reviews, enforce best practices, and ensure compliance with internal security standards • Implement automated testing frameworks for smart contract deployments • Work closely with cybersecurity teams to address vulnerabilities and engage in external security vendor audit of our smart contracts • Optimize performance and scalability for high-volume transaction environments Experience Requirements • 3+ years of development experience in blockchain and smart contracts • Proficiency in Solidity and smart contract development • Experience with Ethereum, Hyperledger Besu, and EVM-based platforms • Strong understanding of tokenization standards (e.g., EIP-7702, EIP-712, ERC-1451) • Knowledge of cryptographic principles, MPC, and secure key management Preferred Experience • Financial services or regulated environments • Integration with custody and settlement systems • Agile development and DevSecOps practices • Java • Spring Boot Education Requirements Preferred Certifications • C4 Ethereum Developer • Cyfrin Smart Contract Skills, experience, and other compensable factors will be considered when determining pay rate. The pay range provided in this posting reflects a W2 hourly rate; other employment options may be available that may result in pay outside of the provided range. W2 employees of Eliassen Group who are regularly scheduled to work 30 or more hours per week are eligible for the following benefits: medical (choice of 3 plans), dental, vision, pre-tax accounts, other voluntary benefits including life and disability insurance, 401(k) with match, and sick time if required by law in the worked-in state/locality. Please be advised- If anyone reaches out to you about an open position connected with Eliassen Group, please confirm that they have an Eliassen.com email address and never provide personal or financial information to anyone who is not clearly associated with Eliassen Group. If you have any indication of fraudulent activity, please contact ********************. Job ID: JN -122025-104583

eNGINE builds Technical Teams. We are a Solutions and Placement firm shaped by decades of interaction with Technical professionals. Our inspiration is continuous learning and engagement with the markets we serve, the talent we represent, and the teams we build. Our Consulting Workforce is encouraged to enjoy career fulfillment in the form of challenging projects, schedule flexibility, and paid training/certifications. Successful outcomes start and finish with eNGINE. eNGINE is hiring a Smart Contract Engineer to join a high-impact Digital Assets Engineering team building blockchain-powered solutions supporting tokenization, custody, and transaction settlement. This role sits at the intersection of emerging Web3 innovation and highly regulated financial services-ideal for engineers who value security, scalability, and real-world application. This position requires working onsite in NYC four days per week. What You'll Do Design, develop, and deploy secure, scalable smart contracts for digital asset use cases Partner with product, engineering, and architecture teams to integrate smart contracts with EVM-compatible chains and institutional platforms Conduct code reviews, enforce development standards, and support secure SDLC practices Build automated testing, validation, and monitoring frameworks for contract deployments Collaborate with cybersecurity teams and external auditors to assess and resolve vulnerabilities Optimize contract performance and gas efficiency in high-volume environments Support blockchain network integrations, token standards, and enterprise-grade interoperability Required Experience 3+ years of hands-on blockchain and smart contract development Expertise in Solidity and EVM-compatible development Experience working with Ethereum, Hyperledger Besu, or similar platforms Strong understanding of token standards (EIP-712, EIP-7702, ERC-1451, etc.) Solid grasp of cryptography concepts, MPC, and secure key management Bachelor's degree in Computer Science or related field Preferred Experience Financial services, fintech, or regulated enterprise environments Familiarity with custody, settlement, or digital asset infrastructure Exposure to Agile delivery, DevSecOps practices, CI/CD pipelines Experience with Java and Spring Boot Preferred Certifications C4 Ethereum Developer Cyfrin Smart Contract No C2C/sponsorship/relocation available.

At MacKay Sposito, we believe great people build great communities-and that starts with hiring the right talent. Engineering Analytics, Inc. is now a part of MacKay Sposito and as we build our Water Treatment practice, we are seeking a dedicated and relationship-driven Senior Design Engineer to join our team in Fort Collins, CO. We offer a comfortable and collaborative work environment with flexible work arrangement options available. We're serious about our work - but we're serious about fun, too. If that sounds good to you, let's talk. This engineer will be required to travel approximately 20% of the time. Key Responsibilities: As a senior technical advisor for water treatment process, provide expert guidance on all aspects Perform and review analyses, prepare drawings, and write and review specifications Responsible for preparing work product Prepare and review the scope and budgets for proposals Oversee construction projects as Client representative Build and maintain strong client relationships Lead, mentor, and grow the water treatment team Minimum Qualifications: B.S. in Chemical, Mechanical or Civil Engineering with an emphasis to the design of wastewater treatment systems Colorado P.E. license is required; P.E. in other southwestern states is a plus 10+ years of experience in process design, construction, and operations Cost estimation, scheduling, subcontractor management Independent project management Manage and mentor junior staff Preferred Qualifications: M.S. in Chemical, Mechanical or Civil Engineering 40 - hour HAZWOPER certification 40 - hour MSHA certification ORC experience (Operator in responsible charge) Technical Skills and abilities: Engineering design, including process, mechanical, piping, and pumping systems Operational and oversight experience Construction management/oversight Cost estimating Preparation of procurement and construction specifications Scheduling and subcontractor management Interpersonal skills: Nimble learner and adapts well to change Emotional intelligence Maintains confidentiality Active listening skills Why join the MacKay Sposito team? A people-first culture - We are dedicated to our employees and their families. We want to do what's best for them, and their well-being helps drive our business decisions. An excellent reputation - Through our 50-year history, MacKay Sposito has built and maintained an outstanding reputation in our community, and with our clients and business partners. You'll be joining a team with a strong foundation and reputation that you can be proud to be part of. A focus on community - MacKay Sposito and our employees believe in giving back to the communities we serve. As a firm, we support several local organizations that focus on our community's pillars of veterans and youth. Our team members take on volunteer positions as commissioners, committee and board members, youth coaches, and participate across a broad range of initiatives. Our Values At MacKay Sposito, we're serious about our work, but we don't take ourselves too seriously. We have a unique and diverse mix of employees who enjoy each other's company. In addition to having first-rate technical skills, we search out people who are friendly, honest and dedicated to their work. We know work isn't only about who you work for, it is also about what you do and how you do it. Led by the strength of our values and a culture shaped by employee ownership, we network with each other, build on each other's contributions, and collaborate to make great things possible. We firmly believe in the principle of constructive candor - always providing the client with everything they need to know to make fully informed decisions. By creating a positive, committed and supportive environment, we're able to challenge our people to be the best that they can be, and to celebrate every success. Who We Are With more than 50 years of experience, MacKay Sposito is a multidisciplinary firm based in Vancouver, Washington, specializing in public works, energy, and land development. Our passionate team focuses on building lasting relationships through quality work, creative design, and collaboration. We offer civil engineering, land surveying, environmental science and permitting, landscape architecture, and construction management and inspection services. With the addition of our subsidiary, Riparia Environmental, we now deliver a full suite of services from design and engineering to maintenance and environmental compliance. Together, we balance development with environmental stewardship and sustainability. About Engineering Analytics, Inc. Engineering Analytics, Inc. (EA), now part of MacKay Sposito, is a civil and environmental engineering firm with a strong reputation for solving complex infrastructure and remediation challenges. With offices in Fort Collins, Colorado; Raton, New Mexico; and San Diego, California, the EA team brings deep expertise in site remediation, mining, water resources, municipal infrastructure, and energy-related projects. EA will continue to operate under its established name during a transitional period as we work toward full integration with MacKay Sposito. Our combined capabilities allow us to offer broader career opportunities, greater resources, and expanded services while maintaining EA's client focus, collaborative culture, and technical excellence. To learn more about EA's background and areas of expertise, visit ********************* Please note that the salary information shown below is a general guideline only. Salaries are based upon candidate experience and qualifications, as well as various market and business considerations. The annual wage range for this position is $130,000- $155,000, depending on experience. Full-time employees receive a comprehensive benefits package, including access to our company-sponsored Medical (with an HSA High Deductible option), Dental, Vision, FSA, and Supplemental Life Insurance plans. We also offer 100% company-paid Life Insurance, Short-Term Disability, and Long-Term Disability coverage. Employees are eligible to participate in our company's 401 (k) plan with up to a 4% match. Additionally, employees also receive paid vacation time, paid sick time, and 11 paid holidays, and are able to participate in employee ownership offerings. MacKay Sposito pays for expenses associated with licensure as well as annual profit-sharing bonuses. Employment requires passing a pre-employment background check and drug screen. As a federal Contractor, we participate in E-Verify and are proud to be an Equal Employment Opportunity Employer. Applications will be reviewed on an ongoing basis. Open until filled.

Burns & McDonnell is seeking a motivated Electrical CAD Technician to support engineering and design teams in creating detailed electrical drawing packages for infrastructure and pipeline-related projects. This role is fully onsite and requires strong attention to detail, collaboration skills, and a desire to grow within a dynamic, fast-paced environment. This is an excellent opportunity for an individual looking to build a long-term career in electrical design within a multidisciplinary team. Responsibilities Create and revise 2D electrical drawings, including: One-line diagrams, wiring diagrams, grounding plans Conduit and cable routing plans Panel layouts, termination diagrams Instrument location plans, I/O layouts, and loop diagrams Develop construction drawing packages under the direction of engineers and designers, following client and company standards. Maintain adherence to Burns & McDonnell CAD standards, layers, title blocks, and conventions. Assist with redline incorporation, as-built updates, and document control. Participate in quality checks and internal drawing reviews. Support creation of plot plans, equipment layouts, and 3D markups, as needed. Collaborate with multi-discipline project teams to coordinate drawing deliverables. Contribute to CAD-related process improvements and drafting efficiencies. Perform miscellaneous project support tasks as assigned. Follow all company policies, procedures, and safety standards. Requirements Education & Experience High school diploma or GED plus coursework in drafting or CAD-related technology. Minimum 1 year of relevant experience. IMPORTANT: Do not submit candidates with a Bachelor's degree in Engineering from an ABET-accredited program (not allowed for this designer/detailer role). Technical Skills Proficiency with AutoCAD (2D required; 3D a plus) - must be apparent on resume. Ability to read and interpret engineering sketches, redlines, and markups. Basic Microsoft Office skills (Word, Excel, PowerPoint, Outlook). Soft Skills Strong attention to detail and organization. Clear written and verbal communication. Problem-solving mindset, proactive, and eager to grow. Other Requirements Must be permanently authorized to work in the U.S. (no sponsorship). Valid driving ability (MVR check required). EEO/Disabled/Veterans consideration applies.

We are seeking a highly motivated Senior Electrical Engineer with 7 to 10 years of experience in the commercial and industrial construction industry to support a growing list of projects in the New York Metropolitan Area. The ideal candidate will have an in-depth knowledge of power system design and a solid foundation in electrical engineering. • Collaborate with the team to create construction documents and perform reviews to meet tight schedules. • Provide technical design services and ensure compliance with Electrical Code. • Mentor junior engineers and oversee construction activities under the direction of the lead electrical engineer. • Conduct load calculations and prepare electrical design calculations, technical reports, engineering plans, and specifications. • Select electrical equipment, including transformers, switchgear, and circuit breakers. • Manage junior engineers in preparing comprehensive engineering reports and documentation. • Perform engineering design evaluations and lead project-specific engineering design. • Conduct construction oversight and field inspections for quality control. • Collaborate on marketing materials and proposals as needed. Requirements: • Bachelor's degree in Electrical Engineering or an approved equivalent. • 7 to 10 years of relevant experience in electrical engineering, design, QA/QC, and construction oversight. • Comprehensive understanding of the NEC, building codes, and general construction practices. • EIT or PE preferred. • Proficient in Microsoft Office, AutoCAD, Revit, ETAP, SKM, and construction document drafting practices. • Familiarity with Civil 3D Software is a plus. • Must possess a valid NYS Driver's License or a nearby state equivalent. Key Skills: • Proficient in electrical power and lighting software. • Ability to coordinate and collaborate with multiple technical disciplines. • Detail-oriented with strong problem-solving abilities. Benefits: • Medical Insurance • Company-sponsored 401(k) • Paid Time Off (PTO) • Growth potential within a dynamic environment Salary: $125,000.00 - $160,000.00 per year (Depending on experience and qualifications) How to Apply: You can contact the recruiter directly to inquire. Drew Celestino ************ By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from HEPCO, Inc and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, marital status, national origin, age, veteran status, disability, or any other protected class.

Project Engineer II- Licensed (Electrical) CSArch, an A/E firm with offices in Albany and Newburgh, NY is currently seeking a full-time Project Engineer for the Albany office. The Project Engineer II has at least 5 years of experience as a Licensed Engineer (Electrical). The successful candidate should possess an Associate's, Bachelor's, or Master's degree of Engineering. The candidate must have at least 3 years of Revit experience. This position is primarily responsible for the technical engineering and production aspects of medium to large projects from conceptual design through construction closeout. SPECIFIC DUTIES AND RESPONSIBILITIES: Leads in-house building systems design / engineering team through development of design and construction documentation process. Could also provide Project Engineer support as part of a larger project team on larger projects. Develops and coordinates with all engineering disciplines and architecture team to produce construction documents. Involved in field investigations, detailed engineering design work and development of design computations. Oversees code compliance with applicable engineering codes, standards and guidelines. Informs, directs and trains engineers-in-training and less experienced project engineers relative to these. Develops and coordinates engineering technical specifications. Adheres to and implements corporate contract documentation procedures and standards as they best apply. Responsible for all engineering aspects of construction administration including but not limited to shop drawing/submittal review and coordination, attending project meetings, developing field reports, periodic monitoring of construction sites, interfacing with contractors and clients. Supports project management with development of staffing, fee, budget estimating and project scheduling. Ensures that Quality Control procedures are being met. Will supervise small engineering staff and could have significant client contact. REQUIREMENTS/QUALIFICATIONS: Licensure Requirements: Licensed Education Requirements: Associate's, Bachelor's, or Master's degree of Engineering in electrical engineering. Experience: Minimum 5 years experience as a Licensed Engineer Computer Skills: Revit- minimum of 3 years experience and other design/presentation software programs; MS Office proficient; use of Adobe products; Submittal Exchange Excellent written, verbal and visual communication skills Detail oriented; highly organized; self-motivated; able to exercise independent judgment, multi-task, delegate, plan, set goals, meet critical deadlines, be accurate, work under pressure; conflict resolution/negotiation skills; team building and leadership skills. 40+ hours M-F; overtime as necessary to meet deadlines, travel, driving, occasional lifting/carrying up to 40 lbs. Site observations may involve outdoor weather, year-round, moving mechanical equipment, climbing ladders/scaffolding and observing high area construction activities. Noise level is often loud. Background check may be required. Requires use of hardhat, construction boots, and possibly other safety equipment as required on a construction site.

Requirements Advanced working knowledge of electrical circuit theory and design. Advanced understanding of building power distribution. Advanced understanding of computer network systems and associated communications infrastructure within buildings. Advanced understanding of signals / controls. Proficient technical Report Writing Ability with fluency using the English Language. Computer Skills: Microsoft Office (Word, Excel), CAD Proficiency in both AutoCAD and REVIT. Familiarity and knowledge of the National Electric Code (N.E.C. / NFPA 70). Ability to learn new skills to learn new skills and adapt to non-routine problems. Knowledge / Experience with lighting technologies for buildings. Experience, Education, and Certification Completion of a Bachelor of Science in Electrical Engineering or Bachelor of Engineering Technology in Electrical Engineering from an ABET Accredited program. Successful Completion of the Professional Engineering (PE) requirements in New York State, or within one year of obtaining such with a prior EIT. NYS DMV Driver's License. Six (6) years of experience in design of building electrical systems including power, lighting, fire alarm and special systems. Work Environment Travel between Syracuse, Rochester, Binghamton and Buffalo Office, as well as to project sites will be required on occasion. Interact with client and assist with communication and contracts regarding clients. Physical Demands The job requires prolonged periods of sitting at a computer. Travel will be required within NY State. About Popli Design Group (PDG) PDG is a well-established multi-disciplinary architecture and engineering firm that has been serving clients since 1982. With four decades of experience and expertise, we have evolved from a transportation engineering firm to a comprehensive, full-service organization with seven office locations in New York State. Our extensive portfolio of successful projects has earned us a trusted reputation among our clients. Popli Design Group is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, genetics, disability or protected veteran status, and any other basis protected by applicable local, state, or federal law or Executive Orders. Good faith salary range is provided, and salary package will be commensurate with experience. Salary Description $85,000 - $125,000

Requirements Advanced working knowledge of electrical circuit theory and design. Advanced understanding of building power distribution. Advanced understanding of computer network systems and associated communications infrastructure within buildings. Advanced understanding of signals / controls. Proficient technical Report Writing Ability with fluency using the English Language. Computer Skills: Microsoft Office (Word, Excel), CAD Proficiency in both AutoCAD and REVIT. Familiarity and knowledge of the National Electric Code (N.E.C. / NFPA 70). Ability to learn new skills to learn new skills and adapt to non-routine problems. Knowledge / Experience with lighting technologies for buildings. Experience, Education, and Certification Completion of a Bachelor of Science in Electrical Engineering or Bachelor of Engineering Technology in Electrical Engineering from an ABET Accredited program. Successful Completion of the Professional Engineering (PE) requirements in New York State, or within one year of obtaining such with a prior EIT. NYS DMV Driver's License. Six (6) years of experience in design of building electrical systems including power, lighting, fire alarm and special systems. Work Environment Travel between Syracuse, Rochester, Binghamton and Buffalo Office, as well as to project sites will be required on occasion. Interact with client and assist with communication and contracts regarding clients. Physical Demands The job requires prolonged periods of sitting at a computer. Travel will be required within NY State. About Popli Design Group (PDG) PDG is a well-established multi-disciplinary architecture and engineering firm that has been serving clients since 1982. With four decades of experience and expertise, we have evolved from a transportation engineering firm to a comprehensive, full-service organization with seven office locations in New York State. Our extensive portfolio of successful projects has earned us a trusted reputation among our clients. Popli Design Group is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, genetics, disability or protected veteran status, and any other basis protected by applicable local, state, or federal law or Executive Orders. Good faith salary range is provided, and salary package will be commensurate with experience. Salary Description $85,000 - $125,000

Looking for a career with professional growth in a close-knit, fun atmosphere? Alvine offers the perfect balance of technical and professional growth. We are big enough to deliver cutting-edge experience; small enough to know your name. We think you are going to like Alvine! Job Responsibilities: Preparing design documentation and schedules Providing design of electrical systems, including lighting, power, and communications systems for commercial buildings Performing calculations, sizing, and analysis of electrical systems for buildings Investigating code requirements Ensuring the preparation and timely delivery of accurate, complete, and value-added documents Assisting with construction administration tasks by processing drawings, RFIs, and completing site visits during the construction phase Serving as a liaison between clients, agencies, subcontractors, and the design team Qualifications: Bachelor's degree in Architectural or Electrical Engineering from an accredited college or university Licensed Professional Engineer (P.E.) 7-10+ years of experience in electrical system design Ability to work in a team environment and set and manage priorities Excellent people skills and strong oral and written communication skills We Offer: Professional development opportunities, including training and mentoring programs; organization and professional registration; and tuition and technology reimbursement programs Medical, dental, vision, and life insurance benefits, as well as supplemental insurance through AFLAC Generous 401(k), profit sharing, and discretionary bonuses Progressive wellness benefits, including fitness reimbursement and volunteer time off Relocation assistance This position offers competitive compensation with an expected annual salary range of $115,000 to $125,000+, depending on the candidate's experience. With five locations across the Midwest, Alvine offers both a solid foundation and room for you to advance your career. Join a team where you can make a difference and strengthen our foundation of excellent engineering, client satisfaction, and leadership. Alvine provides equal employment opportunities to all employees and applicants and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all employment terms and conditions, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job DescriptionDescription: The RMH Group has been making a difference in the world and our environment through engineering for over 60 years with our headquarters located in Lakewood, Colorado and a branch office in Phoenix, Arizona. RMH is growing and looking to add an electrical engineer team member with a minimum of 5 years of design experience. Our culture of learning and development will lead to quick growth as we place an emphasis on properly prioritizing work-life harmony while working on challenging engineering projects. Essential Job Responsibilities Proficient knowledge of the National Electrical Code Technical experience with AutoCAD, Revit, SKM Power tools, and electrical modeling software Power design of medium and low voltage, including panel schedules, layout, circuiting, and controls Perform load calculations, voltage drop, arc flash, and circuit breaker coordinator studies Design of electrical one-line diagrams and power distribution systems Design of lighting systems Develop electrical specifications and construction cost estimates Conduct periodic job site observations and quality control tasks Communication with project leads, clients, and contractors Skills Skilled in the use of Microsoft Office and CAD, BlueBeam, REVIT, SKM Power tools/ETAP/Easy Power, and AGI32 software Work collaboratively with other disciplines and coordinate with production staff Quality of Leadership Promotes positive attitude and image Exhibits goal-oriented behavior Shows fairness and consistency Shows good judgment and reasoning ability Takes initiative Requirements: Bachelor's Degree in Electrical Engineering or Architectural Engineering from an ABET accredited four-year college or university Minimum 5 years of experience in the MEP industry Professional Engineer Licensure would be ideal Must be authorized to work in the United States The pay range for this position is expected to be within a range of $80,000 - $125,000, based on multiple factors which include experience, skills, and industry knowledge. RMH is proud to be a part of Equal Employment Opportunity (EEO), Affirmative Action (AA), and M/F/V/D employer programs. We view every project as an opportunity to form a lasting partnership and we are committed to providing a culture that promotes balance, encouraging flexible schedules and hybrid work options that allow employees to make a bigger impact at work, at home and in the community.

Job DescriptionDescription: Is your passion designing complex power systems? Do you enjoy working with clients and team members to solve problems? As an Electrical Project Engineer with Swanson Rink, you will have the opportunity to direct and perform work on a variety of projects with high-profile clients who are passionate about their facilities and work in a collaborative process to find the right solutions for their unique needs. Our engineers are supported by specific Project Management and BIM staff allowing our engineers for focus specifically on developing engineering solutions for our clients. We are looking for engineers who have attained initial experience in electrical engineering design and are seeking an opportunity to engage in this exciting and challenging market. Get to Know Us:INTEGRITY | ENGINEERING EXCELLENCE | LEGACY Founded in 1949, Swanson Rink specializes in designing mechanical, electrical, fire protection, plumbing and technology infrastructure for data centers, airports, and other complex buildings. Ranked among Building Design + Construction top Engineering Firms for both Airport and Data Center design four years running! Our Impact: Swanson Rink provides endowed scholarships to support engineering students, invests hundreds of hours a year in employee training and development, and we encourage our team to Cultivate Curiosity through a monthly presentation series led by team members on the latest issues and trends facing our clients. Follow us on LinkedIn! What Can We Offer You for All Your Hard Work? The opportunity to work on complex, exciting projects for high profile clients Focused training and professional development, mentorship, professional career growth opportunities Paid professional membership fees, tuition reimbursement, prep and exam coverage for certifications and licenses EcoPass/Commuter benefits (Denver) Stock purchase plan Company paid holidays, Paid Time Off, paid parental leave Vision, dental and medical insurance with employer HSA contributions, FSA options Monthly technology allowance Traditional and Roth 401(k) with immediate vesting on matching contributions Your Job Responsibilities: Lead a team of engineers to support the various needs of Swanson Rink's clients including master planning, systems analysis, site studies, and preparation of construction documents. Work with clients through the criteria development stage to determine client needs and goals. Design electrical systems for commercial and institutional buildings. Demonstrate in-depth knowledge and design experience in several of the items below: Power design, including layout and circuiting of receptacles, miscellaneous equipment, mechanical equipment, and completion of panel schedules. Lighting design, including lighting fixture selection, layout, circuiting, and controls for interior and exterior applications. Design of intermediate to complex electrical one-line diagrams. Technology systems design relating to the layout of fire alarm, security, telecommunications and audio/video equipment. Short circuit and voltage drop calculations. Fuse and circuit breaker coordination studies. Power design associated with UPS and generator support systems. Perform studies on various electrical systems, identify options and potential solutions. Provide related cost comparisons. Develop specifications for the lighting and power systems. Review contractor's shop drawings and submittals. Conduct construction observations and prepare reports. Perform required design calculations. Provide technical supervision of assigned electrical designers, electrical engineers and CAD staff. Coordinate with other departments within the Company, Clients and the Client's design team participating in a project. Apply local and national building codes. Survey existing site conditions and plan new work accordingly. Conduct construction observations. Train and motivate employees, providing technical supervision of support staff. Maintain a superior level of service to our clients, ensuring the timely completion of project deliverables. Requirements: Your Requirements and Qualifications: A Bachelor's Degree in Electrical Engineering from an ABET accredited four-year college or university. Registration as a Professional Engineer. Demonstrated supervisory/leaderships skills and/or minimum of one-year supervisory experience or combination of skills and experience necessary to lead a team of Engineers. Requires the ability to pass background checks, security screenings or drug testing as required by our clients and/or Federal contracts. Must be authorized to work in the United States. Salary range of $110,000 - $140,000 and will be based on several factors including experience, knowledge, skills, and abilities of the applicant. Equal Employment Opportunity/Veteran/Disability Note to Staffing Firms: To protect the interests of all parties, Swanson Rink does not accept unsolicited resumes from any source other than directly from an applicant or from an approved vendor with a fully executed written agreement. Swanson Rink is not responsible for any placement fees associated with unsolicited resumes.

Is your passion designing complex power systems? Do you enjoy working with clients and team members to solve problems? As an Electrical Project Engineer with Swanson Rink, you will have the opportunity to direct and perform work on a variety of projects with high-profile clients who are passionate about their facilities and work in a collaborative process to find the right solutions for their unique needs. Our engineers are supported by specific Project Management and BIM staff allowing our engineers for focus specifically on developing engineering solutions for our clients. We are looking for engineers who have attained initial experience in electrical engineering design and are seeking an opportunity to engage in this exciting and challenging market. Get to Know Us:INTEGRITY | ENGINEERING EXCELLENCE | LEGACY Founded in 1949, Swanson Rink specializes in designing mechanical, electrical, fire protection, plumbing and technology infrastructure for data centers, airports, and other complex buildings. Ranked among Building Design + Construction top Engineering Firms for both Airport and Data Center design four years running! Our Impact: Swanson Rink provides endowed scholarships to support engineering students, invests hundreds of hours a year in employee training and development, and we encourage our team to Cultivate Curiosity through a monthly presentation series led by team members on the latest issues and trends facing our clients. Follow us on LinkedIn! What Can We Offer You for All Your Hard Work? The opportunity to work on complex, exciting projects for high profile clients Focused training and professional development, mentorship, professional career growth opportunities Paid professional membership fees, tuition reimbursement, prep and exam coverage for certifications and licenses EcoPass/Commuter benefits (Denver) Stock purchase plan Company paid holidays, Paid Time Off, paid parental leave Vision, dental and medical insurance with employer HSA contributions, FSA options Monthly technology allowance Traditional and Roth 401(k) with immediate vesting on matching contributions Your Job Responsibilities: Lead a team of engineers to support the various needs of Swanson Rink's clients including master planning, systems analysis, site studies, and preparation of construction documents. Work with clients through the criteria development stage to determine client needs and goals. Design electrical systems for commercial and institutional buildings. Demonstrate in-depth knowledge and design experience in several of the items below: Power design, including layout and circuiting of receptacles, miscellaneous equipment, mechanical equipment, and completion of panel schedules. Lighting design, including lighting fixture selection, layout, circuiting, and controls for interior and exterior applications. Design of intermediate to complex electrical one-line diagrams. Technology systems design relating to the layout of fire alarm, security, telecommunications and audio/video equipment. Short circuit and voltage drop calculations. Fuse and circuit breaker coordination studies. Power design associated with UPS and generator support systems. Perform studies on various electrical systems, identify options and potential solutions. Provide related cost comparisons. Develop specifications for the lighting and power systems. Review contractor's shop drawings and submittals. Conduct construction observations and prepare reports. Perform required design calculations. Provide technical supervision of assigned electrical designers, electrical engineers and CAD staff. Coordinate with other departments within the Company, Clients and the Client's design team participating in a project. Apply local and national building codes. Survey existing site conditions and plan new work accordingly. Conduct construction observations. Train and motivate employees, providing technical supervision of support staff. Maintain a superior level of service to our clients, ensuring the timely completion of project deliverables. Requirements Your Requirements and Qualifications: A Bachelor's Degree in Electrical Engineering from an ABET accredited four-year college or university. Registration as a Professional Engineer. Demonstrated supervisory/leaderships skills and/or minimum of one-year supervisory experience or combination of skills and experience necessary to lead a team of Engineers. Requires the ability to pass background checks, security screenings or drug testing as required by our clients and/or Federal contracts. Must be authorized to work in the United States. Salary range of $110,000 - $140,000 and will be based on several factors including experience, knowledge, skills, and abilities of the applicant. Equal Employment Opportunity/Veteran/Disability Note to Staffing Firms: To protect the interests of all parties, Swanson Rink does not accept unsolicited resumes from any source other than directly from an applicant or from an approved vendor with a fully executed written agreement. Swanson Rink is not responsible for any placement fees associated with unsolicited resumes.

The RMH Group has been making a difference in the world and our environment through engineering for over 60 years with our headquarters located in Lakewood, Colorado and a branch office in Phoenix, Arizona. RMH is growing and looking to add an electrical engineer team member with a minimum of 5 years of design experience. Our culture of learning and development will lead to quick growth as we place an emphasis on properly prioritizing work-life harmony while working on challenging engineering projects. Essential Job Responsibilities Proficient knowledge of the National Electrical Code Technical experience with AutoCAD, Revit, SKM Power tools, and electrical modeling software Power design of medium and low voltage, including panel schedules, layout, circuiting, and controls Perform load calculations, voltage drop, arc flash, and circuit breaker coordinator studies Design of electrical one-line diagrams and power distribution systems Design of lighting systems Develop electrical specifications and construction cost estimates Conduct periodic job site observations and quality control tasks Communication with project leads, clients, and contractors Skills Skilled in the use of Microsoft Office and CAD, BlueBeam, REVIT, SKM Power tools/ETAP/Easy Power, and AGI32 software Work collaboratively with other disciplines and coordinate with production staff Quality of Leadership Promotes positive attitude and image Exhibits goal-oriented behavior Shows fairness and consistency Shows good judgment and reasoning ability Takes initiative Requirements Bachelor's Degree in Electrical Engineering or Architectural Engineering from an ABET accredited four-year college or university Minimum 5 years of experience in the MEP industry Professional Engineer Licensure would be ideal Must be authorized to work in the United States The pay range for this position is expected to be within a range of $80,000 - $125,000, based on multiple factors which include experience, skills, and industry knowledge. RMH is proud to be a part of Equal Employment Opportunity (EEO), Affirmative Action (AA), and M/F/V/D employer programs. We view every project as an opportunity to form a lasting partnership and we are committed to providing a culture that promotes balance, encouraging flexible schedules and hybrid work options that allow employees to make a bigger impact at work, at home and in the community. Salary Description $80,000 - $125,000

Job Description At the C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Diversity, equity, inclusion, and belonging are a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is seeking an Electrical Project Engineer to join our Infrastructure Team as part of our Education, Healthcare and Public Facilities Group. The successful candidate will have experience in the design of medium and low voltage electrical systems for buildings, utilities, industrial, campus and facilities. The position will require working on and leading teams for designs of various projects. Candidate will have the opportunity to lead in the growth of the MEP development of staff and provide business opportunities for future projects. This position can be based in our Syracuse, Rochester, Buffalo or Albany office. Relocation assistance available to qualified candidates. Minimal travel estimated under 15%. Position Responsibilities Ability to motivate and mentor junior staff. Project management, communication and multi-tasking skills. Ability to work with internal and external staff on an individual and team basis. Ability to challenge one's self and broaden knowledge base. Willingness to be proactive and anticipate. Skills/Education/Experience Bachelor's of Science or Technology in Electrical Engineering 5-10 years of related experience PE preferred, FE required Experience with the National Electric Code. Experience with Power Systems Analysis, including Short Circuit, Coordination and Arc Flash. Experience with the layout and design of low voltage building distribution systems. Experience with the layout and design of lighting systems. Estimated Compensation Range: $90,000-120,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description At the C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Diversity, equity, inclusion, and belonging are a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is seeking an Electrical Project Engineer to join our Infrastructure Team as part of our Education, Healthcare and Public Facilities Group. The successful candidate will have experience in the design of medium and low voltage electrical systems for buildings, utilities, industrial, campus and facilities. The position will require working on and leading teams for designs of various projects. Candidate will have the opportunity to lead in the growth of the MEP development of staff and provide business opportunities for future projects. This position can be based in our Syracuse, Rochester, Buffalo or Albany office. Relocation assistance available to qualified candidates. Minimal travel estimated under 15%. Position Responsibilities Ability to motivate and mentor junior staff. Project management, communication and multi-tasking skills. Ability to work with internal and external staff on an individual and team basis. Ability to challenge one's self and broaden knowledge base. Willingness to be proactive and anticipate. Skills/Education/Experience Bachelor's of Science or Technology in Electrical Engineering 5-10 years of related experience PE preferred, FE required Experience with the National Electric Code. Experience with Power Systems Analysis, including Short Circuit, Coordination and Arc Flash. Experience with the layout and design of low voltage building distribution systems. Experience with the layout and design of lighting systems. Estimated Compensation Range: $90,000-120,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description At the C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Diversity, equity, inclusion, and belonging are a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is seeking an Electrical Project Engineer to join our Infrastructure Team as part of our Education, Healthcare and Public Facilities Group. The successful candidate will have experience in the design of medium and low voltage electrical systems for buildings, utilities, industrial, campus and facilities. The position will require working on and leading teams for designs of various projects. Candidate will have the opportunity to lead in the growth of the MEP development of staff and provide business opportunities for future projects. This position can be based in our Syracuse, Rochester, Buffalo or Albany office. Relocation assistance available to qualified candidates. Minimal travel estimated under 15%. Position Responsibilities Ability to motivate and mentor junior staff. Project management, communication and multi-tasking skills. Ability to work with internal and external staff on an individual and team basis. Ability to challenge one's self and broaden knowledge base. Willingness to be proactive and anticipate. Skills/Education/Experience Bachelor's of Science or Technology in Electrical Engineering 5-10 years of related experience PE preferred, FE required Experience with the National Electric Code. Experience with Power Systems Analysis, including Short Circuit, Coordination and Arc Flash. Experience with the layout and design of low voltage building distribution systems. Experience with the layout and design of lighting systems. Estimated Compensation Range: $90,000-120,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description At the C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Diversity, equity, inclusion, and belonging are a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is seeking an Electrical Project Engineer to join our Infrastructure Team as part of our Education, Healthcare and Public Facilities Group. The successful candidate will have experience in the design of medium and low voltage electrical systems for buildings, utilities, industrial, campus and facilities. The position will require working on and leading teams for designs of various projects. Candidate will have the opportunity to lead in the growth of the MEP development of staff and provide business opportunities for future projects. This position can be based in our Syracuse, Rochester, Buffalo or Albany office. Relocation assistance available to qualified candidates. Minimal travel estimated under 15%. Position Responsibilities Ability to motivate and mentor junior staff. Project management, communication and multi-tasking skills. Ability to work with internal and external staff on an individual and team basis. Ability to challenge one's self and broaden knowledge base. Willingness to be proactive and anticipate. Skills/Education/Experience Bachelor's of Science or Technology in Electrical Engineering 5-10 years of related experience PE preferred, FE required Experience with the National Electric Code. Experience with Power Systems Analysis, including Short Circuit, Coordination and Arc Flash. Experience with the layout and design of low voltage building distribution systems. Experience with the layout and design of lighting systems. Estimated Compensation Range: $90,000-120,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

M/E Engineering (is now Salas O'Brien Consulting and Engineering Group of New York, Inc.) is currently interviewing for an Electrical Project Engineer in our Buffalo, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities Independently evaluates, selects, and applies standard engineering techniques, procedures, and criteria, using judgment in making minor adoptions and modifications to create schematic. Assignments have clear and specified objectives and require the investigation of a limited number of variables. Works with Principal, Associate and/or Senior Engineer/Designer to clarify project scope and schedule of deliverables. Provides supervision and guidance related largely to overall objectives, critical issues, new concepts and policy matters. Consults with Principal, Associate, Group Manager, or Senior Engineer concerning unusual problems and development. Prepares project plans and specifications. Supervises Designers and CAD Operators as related to tasks in progress. Responsible for accuracy of design, specifications, drawings, etc. Establishes project design concepts, design criteria and scope, space requirements, etc. Makes engineering computations. Projects cost estimations. Coordinates between trades, architect, client, etc. Responsible for equipment selection, sizing, etc. Checks work of designers and CAD operators. Reviews shop drawings. Provides suggestions for improvements of M/E standards. Supervises, coordinates, and reviews the work of Designers and CAD Operators. Performs other related duties as assigned. Education and Experience Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing. Bachelor of Science Degree or equivalent. Two years of experience in responsible charge of project design in respective discipline. Compensation Range The compensation range for this position is $72,500 - $87,360 per year. M/E Engineering (is now Salas O'Brien Consulting and Engineering Group of New York, Inc.) provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, or any other characteristic protected by federal, state, or local laws.