Mechanic jobs in Gautier, MS

Situated on 26 acres, Blakeley BoatWorks is a full-service shipyard focused on new construction and marine repair projects. With our 1,900-short-ton capacity floating dry dock and a 660-short-ton Travelift, Blakeley BoatWorks has a professional and skilled workforce who is committed to the highest standards of quality and safety. The Equipment Mechanic is part of a team that is responsible for upkeep of various types of equipment at the shipyard. Qualified candidates must be familiar with small engine repair. The ideal candidate will be a problem-solver with a passion for marine repairs and a commitment to safety. Requirements Requirements include: * Experience in equipment maintenance and repair on telehandlers, manlifts, air compressors and welding machines * Experience troubleshooting electrical and hydraulic systems * Dedication to safety practices. While not required, experience in maintenance and repairs on Grove cranes, Manitowoc crane and marine travel lifts is preferred.

This is skilled work at the journeyman level in installing, replacing and repairing heating, ventilation, air conditioning and refrigeration systems. JURISDICTIONS YEARLY RATE MOBILE COUNTY $48,091 - $76,882 CITY OF MOBILE $40,528 - $64,790* MOBILE HOUSING AUTHORITY $43,569 - $69,652 * Amended 10/7/2024 Amended 10/17/2025 Minimum Qualification Requirements Graduation from a standard senior high school, or the successful completion of the General Educational Development (GED) test, supplemented by completion of trade school or apprentice program in heating, ventilation and air conditioning, and a minimum of one year journeyman level experience as a heating, air conditioning and refrigeration mechanic; or a combination of education and experience equivalent to these requirements. Special Requirement Possession of the Environmental Protection Agency (EPA) Universal Technician Certification (as required under Section 608 of the Clean Air Act, 1990). Must possess a valid driver's license from state of residence.For details, please see Class Specifications | HEATING/AIR CONDITIONING MECHANIC I | Class Spec Details (governmentjobs.com) All applications should be submitted online through the Mobile Civil Service Job Opportunities page. Accuracy and truthfulness are of primary importance for Civil Service System employment, and all applications are reviewed with this in mind. Please note that this job posting will close once 275 applications have been received. Eligibles selected for appointment must meet the established medical and physical standards for the class of work. The medical examination must be by one of the physicians designated by the Personnel Board. Appointees must bear the cost of the examination. A person with a disability may request accommodation by contacting the Mobile Civil Service at ************. Adam Bourne, Civil Service Director The agencies we serve are equal opportunity employers

Support Staff/Mechanic Additional Information: Show/Hide TITLE: TRANSPORTATION MECHANIC February 2022 DEPARTMENT/SITE: Operations Department / Transportation QUALIFICATIONS: * High school graduate * Possession of a valid Commercial Driver's License required * A minimum of two years training or experience in repair and maintenance of automotive equipment or any equivalent combination of training and experience which provides the required skills, knowledge and abilities REPORTS TO: Transportation Supervisor SUPERVISES N/A JOB GOAL: Under the supervision of the Transportation Supervisor, helps plan, schedule, and perform repair and preventative maintenance of the district bus fleet. Also assists in the maintenance of cars, trucks, and other motorized equipment; prepare and maintain related records, and other related duties as required. PERFORMANCE RESPONSIBILITIES: * Plan and implement a program of scheduled preventative maintenance for the district bus fleet. * Diagnose minor and frequently occurring mechanical problems. * Adjust timing mechanism, replace and sets points and plugs, and reface valves. * Rotate, align, and balance wheels. * Install shock absorbers. * Repair and replace damaged vehicle body parts. * Tests electrical systems and makes necessary repairs. * Remove, replace, and reassemble transmissions; clutches, fuel, oil, and water pumps, generators and other parts of the engine and suspension system. * Performs general maintenance as needed. * Perform mechanical repairs on buses to include major overhauls if directed, as necessary. * Make emergency service calls for stranded buses or other district equipment. * Make recommendations to the supervisor for ordering and stocking all necessary repair parts and necessary supplies. * Maintain the shop area in a clean, orderly and safe condition. * Assist in the service and repair of other district motor vehicles and equipment as needed. * Maintain, repair, and inspect tires and rims, and maintains records of district vehicles. * Perform complete safety inspections as required * Repair carburetors, ignition systems, and electrical components. * Estimate time, material, and equipment needed for assigned jobs. * Replace and adjust brakes, belts, and hoses. * Perform other duties as assigned PHYSICAL DEMANDS AND WORKING CONDITIONS Environment * Indoor/outdoor environment subject to changing temperatures exceeding 90 degrees at times. * Subject to regular exposure to fumes, dust and odor, vehicle exhaust, dirt, oil, grease, and noise from equipment operation. * Work around and with machinery and motorized equipment. * Work in a shop. * Changing priorities and interruption Physical Demands * Sitting, standing, and walking for extended periods of time. * Lifting, carrying, pushing, and pulling object(s) weighing up to 75 pounds. * Manipulate hands and fingers to operate a variety of specialized tools and equipment. * Reach overhead, the shoulder and horizontally to reach and place materials and equipment in certain areas. * Occasional bending, kneeling, crouching, turning and twisting. * Occasional carrying, pushing, or pulling boxes and engines. * Crawling under vehicles. * Clarity of vision at varying distances to observe diagnostic instruments, manuals, and other printed information. * Verbal, auditory, and written capabilities to effectively communicate in an articulate manner. * Perform physically demanding work. TERMS OF EMPLOYMENT: 254 days Salary for this position shall be commensurate with the years of experience as determined by polices and procedure of the Moss Point School District and in accordance with the pay scale. EVALUATION: Performance of this job will be evaluated annually in accordance with provisions of Board of Trustees' policy on evaluation of District personnel. Attachment(s): * Mechanic

Fausak Tires & Service is a full-service auto center. Since 1962, we have worked hard to provide the best service and customer care while reinvesting in our facilities, equipment and personnel. From our beginnings in a former root-beer stand in 1962 to the state-of-the-art shops of today, our difference has always been the people inside the buildings. We have and always will be focused on people, from our employees to our customers to our community. We believe that taking care of each other makes it easy to provide better service which separates us from the competition and delivers more value to our customers. The Senior Automotive Technician ensures that repairs are performed correctly and efficiently by qualified technicians and that the service department maintains a consistently high level of customer satisfaction. They are also responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturers, and Fausak Tires & Service standards. Compensation: Up to $35 flag rate Benefits: Competitive Bi-Weekly Pay Tuition Reimbursement Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement!!! Principal Duties and Responsibilities: Diagnoses vehicles according to the appropriate level of certifications/experience. Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy Performs complex and heavy-duty repairs Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers Recommends services that are necessary to keep the customer's vehicle in running condition; properly documents all recommendations in customer file Follows all safety procedures and reports any concerns to direct supervisor Adheres to Sun Auto's core values, all company policies and procedures as outlined in the Employee Handbook Ability to work flexible schedules, Monday - Saturday Qualifications: Previous automotive technician / mechanic experience required ASE certifications in lieu of experience Ability to demonstrate proper use of computerized equipment for diagnostics Valid Driver's license in the work State (out-of-state driver's licenses must be transferred to work state within 30 days of hire). Must be deemed an eligible driver through an MVR (Motor Vehicle Report) screening. High School Diploma or equivalent; Technical School experience preferred Working Conditions and Physical Demands: The Senior Automotive Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials, and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The use of safety goggles or other PPE may be required when working in these conditions. The Senior Automotive Technician must be able to meet the following physical requirements: Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the building Bend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequently Lift and/or move up to 10 pounds regularly, lift and/or move up to 70 pounds frequently. Communicate with customers and shop personnel Vision sufficient to detect color, depth, and re-focus Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job DescriptionDescription: The Ride Mechanic is responsible for inspecting, maintaining, repairing, and troubleshooting all amusement rides and attractions to ensure they operate safely and efficiently. This position plays a critical role in guest safety and satisfaction by performing preventive maintenance, adhering to safety standards, and promptly addressing mechanical or operational issues. The ideal candidate has strong mechanical aptitude, attention to detail, and a commitment to maintaining the highest level of ride safety and reliability. Key Responsibilities: 1. Preventive Maintenance and Inspection: · Perform daily, weekly, and monthly inspections of rides and attractions to ensure safe and proper operation. · Conduct routine preventive maintenance according to manufacturer specifications and park standards. · Document all maintenance activities and inspection findings accurately in maintenance logs and reports. · Identify potential safety hazards or mechanical issues and take immediate corrective action. 2. Repairs and Troubleshooting: · Diagnose mechanical, hydraulic, pneumatic, and electrical issues on rides and attractions. · Perform repairs and part replacements in a timely and efficient manner to minimize downtime. · Collaborate with other mechanics, electricians, and maintenance staff to resolve complex equipment problems. · Test rides after maintenance or repair to verify safety and performance before reopening to guests. 3. Safety and Compliance: · Ensure all work complies with manufacturer guidelines, safety codes, and state/local amusement ride regulations. · Follow lockout/tagout procedures, confined space entry, and other required safety practices. · Maintain a strong awareness of safety standards and promote a culture of safety throughout the maintenance team. · Immediately report any unsafe conditions, ride malfunctions, or incidents to management. 4. Documentation and Recordkeeping: · Maintain accurate maintenance, inspection, and repair records for all rides and attractions. · Complete required forms, checklists, and reports in accordance with company and regulatory requirements. · Assist in preparing documentation for inspections by state officials or third-party safety auditors. · Track inventory of parts and supplies and notify management of restocking needs. 5. Teamwork and Communication: · Work collaboratively with other maintenance personnel, ride operators, and supervisors to ensure smooth daily operations. · Communicate effectively with management regarding ride status, repairs, and potential safety concerns. · Assist with training new maintenance staff on safety procedures and equipment operation. · Participate in daily operational meetings and provide input on maintenance schedules and priorities. 6. Emergency Response and Support: · Respond promptly to ride stoppages, breakdowns, or mechanical issues during operating hours. · Assist in safely evacuating guests from rides when necessary and support incident investigations. · Be available for on-call duty, after-hours maintenance, or emergency repairs as needed. Qualifications: Education: · High school diploma or equivalent (required). · Technical or trade school certification in mechanical, electrical, or industrial maintenance (preferred). Experience: · Previous experience as a ride mechanic, maintenance technician, or similar role in an amusement park, resort, or entertainment facility (preferred). · Experience working with hydraulics, pneumatics, motors, and control systems. · Strong mechanical and diagnostic skills. Skills: · Strong knowledge of mechanical, hydraulic, pneumatic, and electrical systems. · Ability to read and interpret technical manuals, blueprints, and schematics. · Excellent troubleshooting and problem-solving abilities. · Strong attention to detail and commitment to safety. · Effective communication and teamwork skills. Certifications: · Maintenance or technical certifications (preferred). · CPR and First Aid certification (preferred). · Valid driver's license (required). · Lockout/Tagout and OSHA safety training (preferred). Physical Requirements: · Ability to stand, climb, kneel, and work at heights or in confined spaces for extended periods. · Ability to lift, carry, push, or pull up to 50 pounds. · Comfortable working outdoors in various weather conditions, including heat, rain, and cold. · Must have sufficient strength and coordination to handle tools and mechanical components safely. Work Environment: · Work performed both indoors (maintenance shops) and outdoors (rides and attractions). · Exposure to varying weather conditions, noise, mechanical equipment, and moving parts. · Requires flexibility in scheduling, including weekends, evenings, holidays, and on-call availability. Compensation: · Competitive hourly pay or salary based on experience and certifications. · Potential benefits may include health insurance, paid time off, uniforms, and employee discounts. The Ride Mechanic plays a crucial role in maintaining the safety and enjoyment of all resort guests. Successful candidates must demonstrate technical expertise, reliability, and a strong commitment to safety and operational excellence. Requirements:

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at ******************** * Notice: Know Your Rights: Workplace Discrimination is Illegal * Notice: Pay Transparency Nondiscrimination (English) * Aviso: Transparencia en el Pago No Discriminación (Spanish) Job Description: Airbus Mobile Manufacturing Site (MMS) is looking for a Flightline Avionics Technician to join our final phase team in Mobile, AL. Meet the Team: The team at the Airbus U.S. Manufacturing facilities help assemble the finest aircraft in the world, along two (soon to be three) production lines for the A220 and A320 Family aircraft. On the shop floor you'll be surrounded by individuals who are passionate about aviation and skilled in areas like electrical, structure and quality. Join our team and help build the next generation of aircraft. Your Working Environment: Nearby on 'Airbus Way' you will find the Airbus U.S. Manufacturing Facility for commercial aircraft. Opened at the Mobile Aeroplex at Brookley in 2015, the facility produces A320 Family aircraft and added a second product line for the A220 in 2019. The facility, which strengthens the U.S. aerospace industry, is part of Airbus' strategy to enhance its global competitiveness by meeting the growing needs of its customers in the United States and beyond. How We Care for You: * Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan ("ESOP") * Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program. * Health & Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages. * Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility. Your Challenges: Position Summary: Responsible for performing Functional Test Procedure (FTP), Pre & Post Flight inspection prepare built aircraft for test flight and delivery readiness. This includes operating, testing, troubleshooting, repairing and inspecting aircraft systems using approved aircraft data. Proficiently operate and understand a wide variety of test equipment and tooling. Must be able to interpret technical manuals, drawing and engineering data to support tasks. Complete assigned tasks within the allocated man hour budget and meet the guide lines of safety regulations, on quality and on cost. Primary Responsibilities: 70% * Perform aircraft system Final Test Procedure Test (FTP) / Pre /Post flight check list/ Daily Inspection (DI) prepare built aircraft for test flight readiness * Ability to learn new tasks and techniques in trouble shoot aircraft systems and support Flight line operation at Airbus FAL Mobile Flight line Organization. * Troubleshoots malfunctions, rigs, repairs, replacement aircraft structures, components and aircraft systems of moderate difficulty, maintains and rework aircraft components including but not limited to landing gear, flight surfaces and controls, anti-icing, engines, hydraulics, pneumatics, fuel systems, ventilation, heating and cooling systems and mechanical / Cabin interior components * Servicing, repair and prepare documentation in according with company procedure and specifications ∙ Perform Post dock maintenance daily check list/ Safety and security /Incoming inspection ∙ Perform day to day planned and unplanned aircraft maintenance family * Participate actively in the development and improvement of family system trouble shoot skills * Prior experience as Refuel/Defuel, Aircraft Jack and Tow. Experience performing other miscellaneous aircraft services to include but not limited to: Hydraulic and Engine Oil, service aircraft tire/struts and must be familiar with handling Hazard material policy Knowledge, Skills, Demonstrated Capabilities: 20% * Basic knowledge of electrical/Mechanical theory and thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, and dial indicators, micrometers and powered/non-powered support equipment * Performs a variety of operations in preparing, sealing and testing , using a thorough knowledge of all aircraft sealing techniques, various sealant characteristics such as storage, application, tack-free and cure times * Capable of reading and interpreting approved aircraft diagrams, charts, schematics and maintenance procedures: FTP/WO/AMM/IPC/AWD/SB/ CMM. * Participate to process improvement, root cause analysis, 5S, and all applicable tools for improving work load, quality, safety and reducing cycle time. * Participate in team daily SQCDP project and daily tool / FOD management * Ability to perform work in the confined space area, height condition and outdoor environment condition * Must be able to support and train other aircraft technicians with technical knowledge and skills * Maintain close working relationship with assigned lead person with regard to schedules, priorities, availability of parts, supplies and tools, and special instructions as required * Use a variety of standard and specialized hand tools, power equipment, measuring devices and test equipment in completing work assignments, and jigs/Fixtures with associated license, such as but not limited to: * Crane, * Cherry-picker, * Fork lift, * Lifting platform, * Loading platform * Knowledge of OSHA regulations regarding confined space entry, respiratory protection, proper use of personal PPE * Ability to work under stressful conditions because of degree of responsibility * Exercise and understand Protective equipment, fall protection, hazardous communications and other relevant regulations. * Assist other duties as assigned Qualified Experience / Education / Training: * 3 years minimum aviation experience, preferably in an aviation manufacturing or repair environment required * Valid A&P License * Valid Driver License * Must be willing to work Rotation shift schedule including evenings, weekends, and holidays ∙ Must possess or be able to obtain a valid passport which allows unrestricted travel to Canada * High School Diploma * Vocational/Tech School Credential Preferred: * 3+ years experience in a flight-line environment under FAA/EASA/TCCA Regulations. Technical Systems Proficiency: * Capable of reading and interpreting approved aircraft diagrams, charts, schematics and maintenance procedures/ AMM/IPC/AWD/SB/ CMM... Physical Requirements: * Vision: adequate to enter and read material on computer screens. Able to identify individuals to initiate greetings, the giving of directions and other business interactions * Hearing: able to hear sufficiently to engage in conversation in office settings. Able to hear safety alerts and warning signals. * Speaking: able to engage in conversations in person and via electronic means and deliver information to groups of varying size with or without amplification. * Equipment Operation: Able to operate a wide range of tools and equipment including hydraulic lifts and arms. * Carrying: able to occasionally carry up to 40lbs/18kg while engaging in training, addressing production issues or as part of continuous improvement projects. * Lifting: able to occasionally lift up to 40lbs/18kg. * Pushing/Pulling: able to push/pull items in office areas. * Sitting: able to sit for extended periods of time at the computer and in meetings. ∙ * Squatting/Kneeling: Able to occasionally squat or kneel to retrieve or replace items shelved on bottom shelves. * Confined Space: able to enter and exit a 12" x 22" passage and work through a 9.7" x 17.7" opening while using a respirator within a confined space for various lengths of time. * Heights: able to work at heights of approximately 40 feet on various types of platforms and lifts for various lengths of time * Standing: able to stand for extended periods of time delivering information. * Travel: able to travel overseas and domestically sometimes for extended periods of time. * Walking: able to walk through office and production areas, around flightline and airstrips and sometimes on uneven indoor and/or outdoor surfaces. Take your career to a new level and apply online now! This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Americas, Inc. Employment Type: US - Direct Hire Experience Level: Professional Remote Type: Job Family: Flight line * ----- Job Posting End Date: 01.05.2026 * ----- Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to ****************.

Job ID#: 214716 Job Category: Other Professional Associate - W2 **Avionics Technician- FAA- MRO- Mobile, AL.** **PDS Defense, Inc.** is seeking a skilled and safety-conscious **Avionics Technician** to join our Maintenance, Repair, and Overhaul (MRO) team in Mobile, AL. This is a **safety-sensitive position** requiring strict adherence to FAA regulations and company standards. **Primary Responsibilities:** Perform all maintenance in accordance with FAA approved data and to the standards of good workmanship as required by the client DS Military Aircraft, Inc. Keep safety of flight in the forefront at all times in the production of an airworthy product. Perform routine or special maintenance inspections to prevent failure of aircraft electrical and avionics systems and components; perform complete operational and functional checks on navigation, communication and flight control systems including instrumentation and pitot static installations, etc. Fabricate wiring harnesses, installs/modifies avionic and electrical systems. Determine when a component should be repaired or replaced; decide necessary repair schemes and quantity and type of parts needed to accomplish proper repair. Follow approved maintenance procedures, consulting internal procedures and technical data FAA approved. Perform serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer. Complete work package documentation with sign off after finishing all designated operations. Perform installation of avionic equipment. Interpret avionic/electrical wiring diagrams, wire identification, harness fabrication, wiring and cable integrity, coax cables and fittings and connector assemblies. Adjust, repair, or replace malfunctioning components or assemblies, using hand tools and soldering equipment. Install electrical and electronic components, assemblies, and systems in aircraft, using hand tools, power tools, and soldering equipment. Interpret flight test data to diagnose malfunctions and systemic performance problems. Set up and operate ground support and test equipment to perform functional test of electrical and electronic systems. Troubleshoot, repair, rework, and modify worn or defective assemblies, components or systems. Suggest improvements to processes and procedures. Satisfy work schedule requirements. Plan and perform work requiring a thorough knowledge of electrical/electronic and mechanical theories and principles, specifications, local and national electrical codes, properties of various materials, and principles of operation and application of electronic equipment. Advise operators and line mechanics of operation procedures and requirements for working safely with electrical/electronic and mechanical equipment and components. Inform appropriate management and line mechanics of potential electrical/ mechanical problems and inherent dangers involved. Perform preventive maintenance functions as directed. Assist maintenance personnel with technical troubleshooting. Assist and train other maintenance and/or other technical level employees. Maintain all hangar and shop tools and equipment in a serviceable condition. Ensure assigned work area is kept clean and free of hazards to both personnel and the aircraft. Follow all necessary safety precautions; hearing and eye protection, use of chemicals, engine and propeller hazards, fall protection, etc. As a "safety sensitive" position, this position requires that the employee be able to work in a constant state of alertness and safe manner as an essential job function. Comply with OSHA Safety Regulations. Participate in on-the-job training as required. Observe safety procedures and personnel policies. Regular attendance required as outlined in company policy. **Additional Responsibilities:** **Education:** Certified by FAA with a current Airframe and Power Plant license is preferred. FCC 2nd Class License preferred 3-5 years of proven experience in the electrical/electronics, and the ability to demonstrate proficiency in these areas. Proficiency with interpretation of avionic/electrical wiring diagrams, wire identification, harness fabrication, cables, fittings, circuits and connectors. Thorough knowledge of electrical/ electronic components and equipment including the use of special instruments for diagnostic purposes. Ability to inspect and install digital avionics equipment. Ability to work quickly and efficiently while ensuring quality work. While performing the duties of this position, the employee is regularly required to stand; use hands and fingers to handle or feel, talk or hear and have good visual abilities. Will often be required to sit, climb or balance and work in close quarters. Must be able to work well with all levels of personnel whether individually or in a team environment. High degree of precision working with minimum tolerances required. Must be safety conscious at all times. Able to lift or help lift up to 50 lbs. Note: Noise level may be loud at times. Previous experience on turbo prop aircraft preferred. Must understand, read and write proficiently in the English language to read and understand appropriate manuals, schematics, and technical information necessary to adequately perform duties. **Experience:** Prior avionics experience is required. Prior experience in aircraft maintenance required. Familiar with turbo prop aircraft is a plus. Licensure/Certifications: Certified by FAA with a current Airframe and Power Plant Mechanic license is a plus. FCC license is not required; but is a plus. Communication Skills (Spoken, Written, Influencing, Proficiency in Other Languages): English language is required; bilingual in Spanish is not required, but is a plus. Travel Required: 10% Potential Domestic and International travel Eligibility: U.S. Citizen or Permanent Resident (Green Card Holders) Physical Requirements: Sitting, Standing, Squatting/Kneeling, Walking, Speaking, Hearing, Vision, Manual Dexterity, ability to work in somewhat confined spaces. Benefits offered to vary by the contract. Depending on your temporary assignment, benefits may include direct deposit, free career counseling services, 401(k), select paid holidays, short-term disability insurance, skills training, employee referral bonus, affordable medical coverage plan, and DailyPay (in some locations). For a full description of benefits available to you, be sure to talk with your recruiter. Job Requirements Minimum Security Clearance: No Clearance Military connected talent encouraged to apply. **VEVRAA Federal Contractor / Request Priority Protected Veteran Referrals / Equal Opportunity Employer / Veterans / Disabled** To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit **************************************** or ***************************************** The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: + The California Fair Chance Act. + Los Angeles City Fair Chance Ordinance + Los Angeles County Fair Chance Ordinance for Employers + San Francisco Fair Chance Ordinance VEVRAA Federal Contractor / Request Priority Protected Veteran Referrals / Equal Opportunity Employer / Veterans / Disabled

Advance Your Career with Altrad Sparrows! Ready to embrace new opportunities and challenges? Altrad Sparrows, a part of Altrad Group, is a global provider of specialist engineering, inspection, operations and maintenance services to the offshore energy, renewables and industrial markets. Our solutions support our clients to optimize their efficiency by ensuring the performance, reliability and safety of critical equipment and people. With our headquarters in France, we employ over 52,000 people across numerous operational locations within the Americas, Europe, Middle East, Africa and Asia Pacific. Position: Industrial Millwright Main Responsibilities: Installation and Maintenance: Install, repair, and maintain commercial and industrial machinery in various settings, including buildings, plants, and manufacturing facilities. Ensure all machines operate efficiently through troubleshooting and preventative maintenance. Inspection and Measurement: Inspect used parts to determine dimensional changes using tools such as rules, calipers, and micrometers. Adjustment of Equipment: Adjust functional parts of devices and control instruments using hand tools, levels, plumb bobs, and straightedges. Safety and Compliance: Ensure the correct and safe operation of equipment and machinery using the customer's onsite maintenance management system (CMMS). Technical Reading: Read diagrams, schematic drawings, and service manuals to establish work procedures. Troubleshooting: Diagnose and maintain engines, conveyors, electrical systems, and pneumatic and hydraulic equipment. Precision Fitting: Fit bearings, align gears and shafts, attach motors, and connect couplings and belts to precise tolerances. Fault Identification: Identify faulty equipment through observation and testing metrics. Parts Management: Identify and request necessary replacement parts to perform repairs. Collaboration: Work with the facility manager to continually update production processes and system software as applicable. Meeting Participation: Attend daily shift meetings to prioritize work orders and minimize downtime. Safe Operation: Safely operate cranes, power tools, hoists, and hand tools. Inventory Management: Maintain an inventory of parts and tools. Documentation: Prepare maintenance reports and summaries using daily activity logs and work tickets. Continuous Learning: Maintain knowledge of electrical, pneumatic, hydraulic, and mechanical systems through ongoing training, industry workshops, and technical reading. Qualifications and Experience: Experience: Minimum of 3 years of installation, repair, and maintenance of commercial and industrial machinery. Strong knowledge of electrical, pneumatic, hydraulic, and mechanical systems is essential. OSHA Knowledge: Familiarity with OSHA standards and requirements. Communication Skills: Strong oral and written communication abilities. Repair Skills: Proficient in repair techniques. Driving Record: A good driving record is essential. Independence: Ability to perform tasks independently. Education: High School Diploma or equivalent. WE OFFER: A Commitment to Excellence: We support the global energy industry by optimizing the performance, reliability, and safety of critical equipment and people through our engineered products and services. Growth Opportunities: As a leading energy services contractor, we provide high-quality specialist equipment and integrated engineering services, ensuring our employees are part of a growing and dynamic team. Core Values: We foster a workplace built on Respect, where everyone is valued; Solidarity, promoting teamwork and collaboration; Courage, encouraging innovative thinking; Humility, embracing diverse perspectives; and Conviviality, creating a positive and inclusive environment. Benefits: Health insurance Dental insurance Vision insurance 401(k) 401(k) matching Life insurance Paid time off Referral program Retirement plan All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. **Candidates applying for US based positions must be eligible to work in the U.S. without sponsorship. ** #LI-TF1 Altrad Sparrows is an EEO Employer - M/F/Disability/Protected Veteran Status View all jobs at this company

To perform this job successfully, an individual must be able to perform the essential job functions satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the primary job functions herein described. Since every duty associated with this position may not be described herein, employees may be required to perform duties not specifically spelled out in the , but which may be reasonably considered to be incidental in the performing of their duties just as though they were actually written out in this job description. MECHANIC Department: Environmental Services Pay Grade: 109 FLSA Status: Non-Exempt Personnel Status: Regular Full-Time JOB SUMMARY This position is responsible for assisting in the diagnosis and repair of mechanical problems on a variety of vehicles and equipment. This position reports to the Fleet Services Coordinator. ESSENTIAL JOB FUNCTIONS * Services and maintains city vehicles and equipment. * Performs computer and mechanical diagnosis on vehicles and equipment. * Performs a variety of preventative maintenance tasks. * Performs corrective maintenance procedures. * Performs other related job duties as assigned. AGENCY-WIDE COMPETENCIES Professional Excellence Sense of responsibility and commitment; ability to meet expectations; quality of work output; willingness to admit and correct mistakes. Communication Ability to express oneself clearly, credibly, and respectfully in an appropriate tone; quality of judgment exercised in what information should be communicated; ability to adjust to different communication styles. Teamwork Commitment to team activities; placing value of team success over personal recognition; altruism; impact on team success; willingness to fulfill a variety of roles. Engagement Initiative exercised in solving problems; willingness to take on new responsibilities; acting on opportunities and presenting ideas; modeling a positive attitude and resilience; volunteering for group work; praising work of the City and coworkers; demonstrating pride in public service. Public Service Views citizens as a priority; demonstrates ethical, trustworthy behavior, stands as an example of servant leadership; maintains trust of the Auburn citizens. QUALIFICATIONS Education and Experience: High school diploma or equivalent; one (1) to three (3) years' experience; or an equivalent combination of education and experience. Special Qualifications: * Possession of or ability to readily obtain a valid Class A Commercial Driver's License. Knowledge, Skills, and Abilities: * Knowledge of preventive maintenance techniques as related to division equipment and vehicles. * Knowledge of the tools, equipment, and procedures used in the diagnosis and repair of equipment and vehicles. * Knowledge of basic mechanical theory. * Knowledge of local government operations, policies and plans, and modern office practices and procedures. * Skill in the diagnosis of mechanical problems for a wide variety of vehicles and equipment. * Skill in welding and parts fabrication. * Skill in the maintenance of repair of department equipment. * Skill in performing preventive and corrective maintenance procedures. * Skill in the use of a variety of hand and power tools. * Skill in using computers for data entry, word processing, and/or accounting purposes. * Skill in effective communication, both orally and in writing. * Ability to meet and deal with employees and the public in an effective and courteous manner. * Ability to get along with others, and work effectively with the public and co-workers. * Ability to deal with confidential and sensitive matters. * Ability to use computers for data entry, word processing, and/or accounting purposes. * Ability to work independently, work well with others, and manage time effectively. PHYSICAL DEMANDS The work is very heavy work, which requires exerting in excess of 100 pounds of force occasionally and/or in excess of 50 pounds of force frequently, and/or in excess of 20 pounds of force constantly to move objects. Work is typically performed while intermittently sitting, standing, stooping, bending, crouching, or walking. The employee uses tools or equipment requiring a high degree of dexterity, distinguishes between shades of color, and utilizes the sense of smell. WORK ENVIRONMENT The work is typically performed in a garage environment. The employee is exposed to noise, dust, dirt, grease, machinery with moving parts, irritating chemicals, and occasional cold or inclement weather. The work requires the use of protective devices such as masks, goggles, gloves, etc.

Morin Repair Service is seeking an experienced Industrial Mechanic to join our team. The ideal candidate will have a strong background in mechanical systems and be able to troubleshoot and repair a variety of industrial equipment. Morin has been recognized as superior in equipment sales, distribution, repair, and service. This is your chance to become a part of a hard working, dedicated team! Responsibilities: - Perform routine maintenance on industrial equipment - Troubleshoot and repair mechanical systems - Install new equipment and machinery If you are a skilled Industrial Mechanic looking for a challenging and rewarding opportunity, we encourage you to apply for this position. We offer competitive compensation and benefits packages, as well as opportunities for career growth and advancement within our organization. Requirements - High school diploma or equivalent - Prior experience as an Industrial Mechanic - Ability to read and interpret technical manuals and schematics - Strong attention to detail and problem solving skills - Good communication skills

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at ******************** Notice: Know Your Rights: Workplace Discrimination is Illegal Notice: Pay Transparency Nondiscrimination (English) Aviso: Transparencia en el Pago No Discriminación (Spanish) Job Description: Airbus Mobile Manufacturing Site (MMS) is looking for a Flightline Avionics Technician to join our final phase team in Mobile, AL. Meet the Team: The team at the Airbus U.S. Manufacturing facilities help assemble the finest aircraft in the world, along two (soon to be three) production lines for the A220 and A320 Family aircraft. On the shop floor you'll be surrounded by individuals who are passionate about aviation and skilled in areas like electrical, structure and quality. Join our team and help build the next generation of aircraft. Your Working Environment: Nearby on ‘Airbus Way' you will find the Airbus U.S. Manufacturing Facility for commercial aircraft. Opened at the Mobile Aeroplex at Brookley in 2015, the facility produces A320 Family aircraft and added a second product line for the A220 in 2019. The facility, which strengthens the U.S. aerospace industry, is part of Airbus' strategy to enhance its global competitiveness by meeting the growing needs of its customers in the United States and beyond. How We Care for You: Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan (“ESOP”) Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program. Health & Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan (“EAP”) and other supplemental benefit coverages. Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility. Your Challenges: Position Summary: Responsible for performing Functional Test Procedure (FTP), Pre & Post Flight inspection prepare built aircraft for test flight and delivery readiness. This includes operating, testing, troubleshooting, repairing and inspecting aircraft systems using approved aircraft data. Proficiently operate and understand a wide variety of test equipment and tooling. Must be able to interpret technical manuals, drawing and engineering data to support tasks. Complete assigned tasks within the allocated man hour budget and meet the guide lines of safety regulations, on quality and on cost. Primary Responsibilities: 70% Perform aircraft system Final Test Procedure Test (FTP) / Pre /Post flight check list/ Daily Inspection (DI) prepare built aircraft for test flight readiness Ability to learn new tasks and techniques in trouble shoot aircraft systems and support Flight line operation at Airbus FAL Mobile Flight line Organization. Troubleshoots malfunctions, rigs, repairs, replacement aircraft structures, components and aircraft systems of moderate difficulty, maintains and rework aircraft components including but not limited to landing gear, flight surfaces and controls, anti-icing, engines, hydraulics, pneumatics, fuel systems, ventilation, heating and cooling systems and mechanical / Cabin interior components Servicing, repair and prepare documentation in according with company procedure and specifications ∙ Perform Post dock maintenance daily check list/ Safety and security /Incoming inspection ∙ Perform day to day planned and unplanned aircraft maintenance family Participate actively in the development and improvement of family system trouble shoot skills Prior experience as Refuel/Defuel, Aircraft Jack and Tow. Experience performing other miscellaneous aircraft services to include but not limited to: Hydraulic and Engine Oil, service aircraft tire/struts and must be familiar with handling Hazard material policy Knowledge, Skills, Demonstrated Capabilities: 20% Basic knowledge of electrical/Mechanical theory and thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, and dial indicators, micrometers and powered/non-powered support equipment Performs a variety of operations in preparing, sealing and testing , using a thorough knowledge of all aircraft sealing techniques, various sealant characteristics such as storage, application, tack-free and cure times Capable of reading and interpreting approved aircraft diagrams, charts, schematics and maintenance procedures: FTP/WO/AMM/IPC/AWD/SB/ CMM. Participate to process improvement, root cause analysis, 5S, and all applicable tools for improving work load, quality, safety and reducing cycle time. Participate in team daily SQCDP project and daily tool / FOD management Ability to perform work in the confined space area, height condition and outdoor environment condition Must be able to support and train other aircraft technicians with technical knowledge and skills Maintain close working relationship with assigned lead person with regard to schedules, priorities, availability of parts, supplies and tools, and special instructions as required Use a variety of standard and specialized hand tools, power equipment, measuring devices and test equipment in completing work assignments, and jigs/Fixtures with associated license, such as but not limited to: Crane, Cherry-picker, Fork lift, Lifting platform, Loading platform Knowledge of OSHA regulations regarding confined space entry, respiratory protection, proper use of personal PPE Ability to work under stressful conditions because of degree of responsibility Exercise and understand Protective equipment, fall protection, hazardous communications and other relevant regulations. Assist other duties as assigned Qualified Experience / Education / Training: 3 years minimum aviation experience, preferably in an aviation manufacturing or repair environment required Valid A&P License Valid Driver License Must be willing to work Rotation shift schedule including evenings, weekends, and holidays ∙ Must possess or be able to obtain a valid passport which allows unrestricted travel to Canada High School Diploma Vocational/Tech School Credential Preferred: 3+ years experience in a flight-line environment under FAA/EASA/TCCA Regulations. Technical Systems Proficiency: Capable of reading and interpreting approved aircraft diagrams, charts, schematics and maintenance procedures/ AMM/IPC/AWD/SB/ CMM... Physical Requirements: Vision: adequate to enter and read material on computer screens. Able to identify individuals to initiate greetings, the giving of directions and other business interactions Hearing: able to hear sufficiently to engage in conversation in office settings. Able to hear safety alerts and warning signals. Speaking: able to engage in conversations in person and via electronic means and deliver information to groups of varying size with or without amplification. Equipment Operation: Able to operate a wide range of tools and equipment including hydraulic lifts and arms. Carrying: able to occasionally carry up to 40lbs/18kg while engaging in training, addressing production issues or as part of continuous improvement projects. Lifting: able to occasionally lift up to 40lbs/18kg. Pushing/Pulling: able to push/pull items in office areas. Sitting: able to sit for extended periods of time at the computer and in meetings. ∙ Squatting/Kneeling: Able to occasionally squat or kneel to retrieve or replace items shelved on bottom shelves. Confined Space: able to enter and exit a 12" x 22" passage and work through a 9.7" x 17.7" opening while using a respirator within a confined space for various lengths of time. Heights: able to work at heights of approximately 40 feet on various types of platforms and lifts for various lengths of time Standing: able to stand for extended periods of time delivering information. Travel: able to travel overseas and domestically sometimes for extended periods of time. Walking: able to walk through office and production areas, around flightline and airstrips and sometimes on uneven indoor and/or outdoor surfaces. Take your career to a new level and apply online now! This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Americas, Inc. Employment Type: US - Direct Hire Experience Level: Professional Remote Type: Job Family: Flight line ------ Job Posting End Date: 01.05.2026 ------ Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to ****************.

Services_AME-E524 Mechanic - Full Time - Mobile (AL), United States Sulzer is a leading engineering company with a proud heritage of innovation. Join our global team to grow your expertise and develop innovative solutions that enable a prosperous and more sustainable society. We are looking for a Mechanic to join our Services_AME team in United States . Your main tasks and responsibilities: * Assembling all types of pump equipment to customer, OEM and industry standard specifications * Disassembling equipment to gain access remove, clean and inspect components * Inspecting & recording component measurements using instruments, tools and gages and providing inspection report * Investigating and determining root cause failure * Determining proper materials for repairs as per BOM * Contouring impellers and pump casings to meet hydraulic requirements * Setting and operating dynamic balancing equipment * Performing final testing and inspections To succeed in this role, you will need: * Analytical and interpersonal skills * Attention to detail * Extensive knowledge of and ability to use hand tools, precision measuring and testing equipment and machine shop equipment * Ability to work with limited supervision * Ability to travel to and work at customer sites * Ability to work overtime What we offer you: * 15 days of paid time off and 12 company-paid holiday * 401k plan with a 6% match * Comprehensive health plan including medical, dental, vision, Life, short-term & long-term disability * Motivating wellness program * Employee Assistance Program * Paid paternal leave * Gym re-imbursement No visa or work permit support can be provided for this role. Our team is looking forward hearing from you! Sulzer is an equal opportunity employer. We believe in the strength of a diverse workforce and are committed to offering an inclusive work environment. We are proud to be recognized as a Top Employer 2025 in the USA. About us Sulzer is a global leader in critical applications for core infrastructure and processes for large essential industries around the world. We ensure the security, quality and durability of critical goods and services by supporting energy security, natural resource management and efficiencies in process industries. This in turn supports the transition to a circular economy. Our integrated solutions add significant value by enabling energy efficiency, carbon emissions and pollution reduction, and process efficiency improvements. Customers benefit from our commitment to innovation, performance and quality through our responsive network of 160 world-class manufacturing facilities and service centers across the globe. Sulzer has been headquartered in Winterthur, Switzerland, since 1834. In 2024, our 13'500 employees delivered revenues of CHF 3.5 billion. Our shares are traded on the SIX Swiss Exchange (SIX: SUN). ************** Here you can find other opportunities:

ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes. Repair, replace, and rebuild aircraft structures such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units. Read and interpret manufacturers' and airline's maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Examine engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burned valves. Inspect turbine blades to detect cracks or breaks. Test engine operation to locate source of malfunction. Replace or repair worn or damaged components such as carburetors, alternators, and magnetos. Remove engine from aircraft and disassemble and inspect parts for wear, warping, or other defects. Repair or replace defective engine parts and reassembles and installs engine in aircraft. Adjust, repair, or replace electrical wiring system and aircraft accessories. Perform maintenance, preventative maintenance, alteration, or repair of aircraft Provide information and work order updates as required. Update squawk lists and submit requests for parts orders. Provide data for labor standards and business metrics as required. Clean engine components as needed. Sign regulatory paperwork and work order paperwork as needed. Complete quality checks and related documentation per company procedure. Knowledge of and ability to adhere to safety requirements, OSHA, and environmental policies. NON-ESSENTIAL DUTIES AND RESPONSIBILITIES: Research manufacturer's specific technical instructions and bulletins and FAA regulatory directives and complete aircraft maintenance records. Perform annual inspections of aircraft. Other duties as assigned.

We are looking for Experienced Service technicians to join our quick service team. This position will primarily be performing oil changes, tire rotations and tire replacement/repairs. Depending on the experience of the individual, additional maintenance work can be performed. Individuals motivated to learn this trade will have opportunities to grow into a main shop mechanic. Prior experience with mechanical repair work is preferred but not required. We provide an excellent working environment and are always trying to give our employees opportunities to grow within our company. Happy employees make happy customers, and we reward individuals who are ready to work hard and stay motivated. Every employee at McConnell Automotive is absolutely critical to its success. Our promise is to keep delivering the same award-winning service and value that our community has come to expect from our dealership through the years. What We Offer Medical and Dental 401K Plan Paid time off and vacation Growth opportunities Paid Training Family owned and operated Long term job security Health and wellness Flexible Work Schedule Discounts on products and services Technician Specific Benefits State-of-the-art facility with cutting edge technology Shop equipped with the newest technology and equipment Uniforms provided Discounts on products and services Work environment OSHA certified to current Air Quality Standards Highly productive shop Career advancement opportunities, promote from within ASE and state inspection certification reimbursement and all training expenses paid to further your career Continued education, manufacturer hands on and web based training Clean and professional work environment Competitive wages Responsibilities Check and communicate oil level to teammates Ensure tire pressure for proper inflation Inspect and refill fluid levels as necessary Complete Multi Point Vehicle Inspection Install a new oil drain plug and a new oil filter Clean and lubricate fittings as needed Providing excellent customer service keeping in mind that our customer's perspective comes first. Qualifications Communication skills - communicates effectively with others. Time management - managing one's own time and time of others. Basic computer skills. Willing to submit to a pre-employment background check & drug screen Mechanical knowledge is preferred but not required. 2 years of experience Mandatory

Job DescriptionDescription: Essential Functions of Shop Mechanic/ Lead Mechanic Diagnose and repair tractors and trailers. Perform annual/systematic 90 day and HM-183 inspections (trailers) on equipment as required. Ensure equipment meets Federal FHWA standards. Knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures. HVAC work and procedures Order and receive parts and supplies as needed. Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous wastes. Clean, organize and maintain the work environment to ensure equipment longevity and workplace safety Perform miscellaneous duties as assigned. *Knowledge/ Skills/Education Required for shop mechanic: ? High school diploma, completion of G.E.D., or equivalent vocational school. ? Must possess at least 3 years of experience in the repair and service of trailers and Heavy-duty trucks. ? Knowledge is mandatory of vehicle and equipment theory, principles, and repair relating to diesel engines, air, electrical, mechanical, and hydraulic systems. ? Knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures. ? Ability to use vehicle diagnostic software. ? Basic computer skills ? Must have basic tools to perform work ? Operate a yard truck to move trailers within the facility yard and the shop as needed. Benefits Health insurance Dental insurance ?Paid time off ?Vision insurance ?401k Requirements: Must be able to pass a background check and drug screening We offer competitive wages and employee benefits (Paid Time Off/Holiday Schedule, in addition to Medical, Dental, and Vision plans). Experience Required 2 - 3 years: Diesel tractor trailer maintenance 2 - 3 years: Repair tractor trailers Education Required High School or better

Trailer Mechanic Must be mechanically inclined. Prefer experience in all phases of semi-trailer repairs such as brakes, electrical, floor repair, tires, welding, hydraulics, preventive maintenance, troubleshooting, modifications work, etc. Also, experience in DOT inspections, welding, tires new and repairing, change (mount & dismount). Perform routine maintenance functions and adjustments on trailing equipment in compliance with manufacturers and company schedules. Access any area of the equipment to perform necessary maintenance (including: inspect and perform work in, on or under parts of trailers). Safely walk & stand for extended periods of time on various surfaces that may be uneven or slippery (including working outdoors in inclement weather). Lift objects of various shapes, sizes and weights (up to 50 lbs. frequently and greater than 75 lbs. occasionally). Safely walk, reach (including above your head), bend, climb, push, pull, twist, squat & kneel as necessary to perform the job duties. Responsible for shop cleanliness, safety and compliance. Apply knowledge and work in accordance with DOT, Environmental Protection Agency (EPA), interstate Authority, Occupational Safety and Health Administration (OSHA) and other rules and regulations as required. Perform safety inspections of equipment and prepare safety documentation. Follow McGriff policy and procedures in making all repairs. Participate in company training programs. Perform other duties as assigned. Prompt, daily attendance at assigned work location. General trailer repair and knowledge Previous or current ASE certifications desired, not required. Basic welding skills such as Oxy/Acetylene, ARC and MIG desired Must have clean MVR, Drug Test, pass DOT physical. Please apply at *************************** Job Type: Full-time Salary: Pay determined by experience. Benefits 401(k) 401(k) matching Dental insurance Health insurance Life insurance Paid time off Vision insurance Schedule 8-hour shift Ability To Commute/relocate Reliably commute or planning to relocate before starting work (Required) Work Location: In person

Job Description Posting Name: Mechanic I (OSM) Schedule: 4x10's; M - T, 6:00 AM - 3:30 PM is located at our Bayou La Batre, AL facility. Join the Birdon team and help ensure USCG boats are safe and reliable! Our mechanics are an integral piece of our work on a daily basis. Some of your daily functions will include: Knowledge of 12-volt and 24-volt electrical systems as it pertains to starting circuits. Must be able to follow schedules and deadlines. Must be able to align diesel engines to shafts proficiently. Must be able to install and align P-Struts Must be able to read various instruments of measure (micrometer, feeler gauges, levels, tape, torque wrenches, calipers, etc) Must possess advanced knowledge of steering, fuel, exhaust, cooling, and other related systems as it pertains to marine engines and generators. Must be able to install systems including but not limited to: fire suppression, steering, cooling, fuel, DC systems related to engines, fire pumps, jets, drive shafts and exhaust. Install generators. Install and plumb AC and generator cooling water pickup systems. Run and troubleshoot generator systems. If you have at least 2 years' experience in Marine Mechanical Installation, possess a High School Diploma or GED and fundamental knowledge in marine electrical systems, we want to talk to you! Birdon is committed to the HEALTH and SAFETY of our workforce and to the ENVIRONMENT, we expect this same commitment from all employees. Birdon America Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Know Your Rights The Company invites any applicant and/or employee to review the Company's written Affirmative Action Plan. This plan is available for inspection upon request by emailing ************. If you are an individual with a disability and would like to request a reasonable accommodation as part of the employment selection process, please contact ************ for further assistance.

This is semi-skilled heating and air conditioning work requiring the completion of increasingly more skilled tasks in installing, replacing and repairing heating, ventilation, air conditioning and refrigerator systems while training to perform at the journeyman level of Heating/Air Conditioning Mechanic. JURISDICTIONS YEARLY RATE MOBILE COUNTY $43,568 - $69,651 * CITY OF MOBILE $36,716 - $58,696 * Amended 10/17/2025 Minimum Qualification Requirements Graduation from a standard senior high school with completion of a high school trade program in heating and air conditioning, or high school graduation or GED and a minimum of one year's verifiable related training or experience in semi-skilled heating/air conditioning activities; or a combination of education and experience equivalent to these requirements. Special Requirement Must possess a valid driver's license from the state of residency.For details, please see the Class Specifications | HEATING/AIR CONDITIONING MECHANIC TRAINEE | Class Spec Details All applications should be submitted online through the Mobile Civil Service Job Opportunities page. Accuracy and truthfulness are of primary importance for Civil Service System employment, and all applications are reviewed with this in mind. Please note that this job posting will close once 275 applications have been received. Eligibles selected for appointment must meet the established medical and physical standards for the class of work. The medical examination must be by one of the physicians designated by the Personnel Board. Appointees must bear the cost of the examination. A person with a disability may request accommodation by contacting the Mobile Civil Service at ************. Adam Bourne, Civil Service Director The agencies we serve are equal opportunity employers

Airbus U.S. Space & Defense, Inc offers advanced solutions to meet the most complex U.S. defense, security, space, and intelligence requirements. Celebrating over 50 years in the US, we remain a trusted government partner, leveraging world-class satellite, laser communication, rotor and fixed wing solutions to help our national security, defense and space focused customers meet their missions. Airbus U.S. looks to employ a commitment driven team, dedicated to enabling our customer's mission success. We are committed to maintaining a diverse and inclusive work environment and a welcoming and engaging staff. With competitive compensation and superior employee benefits, as well as a commitment to fostering individual career growth, Airbus U.S. is the place where top talent wants to work. Position Summary: Repair, service, clean and maintain aircraft systems in accordance with FAA. Primary Responsibilities: Basic Requirements: Perform all maintenance in accordance with FAA approved data and to the standards of good workmanship as required by Airbus DS Military Aircraft, Inc. Keep safety of flight in the forefront at all times in the production of an airworthy product. Scope of Work: Accurately and legibly record all information required on internal company forms and aircraft maintenance documents in conformance to company, customer and FAA requirements. Ensure appropriate use of the correct tools for the application and that tooling is serviceable and calibrated when necessary. Locate, understand and implement the appropriate technical data used while performing maintenance. Perform any duties that may be assigned by the Maintenance Supervisor. Policy compliance: Ensure assigned work area is kept clean and free of hazards to both personnel and the aircraft. Follow all necessary safety precautions; hearing and eye protection, use of chemicals, engine and propeller hazards, fall protection, etc. Comply with OSHA Safety Regulations. Participate in on-the-job training as required. Observe safety procedures and personnel policies. Regular attendance required as outlined in company policy. Education: High School Diploma Training in Airframe and Power Plant with emphasis on Structures and Composites Experience: Prior avionics experience is required. 5-10 years' experience with general aviation maintenance work and activities. Familiar with turbo prop aircraft is a plus. Licensure/Certifications: Certified by FAA with a current Airframe and Power Plant Mechanic license Communication Skills (Spoken, Written, Influencing, Proficiency in Other Languages): English language is required; bilingual in Spanish is not required, but is a plus. Travel Required: Limited Potential for Domestic and International travel Eligibility: Must be a U.S. Person as defined by the U.S. export control regulations (U.S. Citizen, U.S. Permanent Resident/Green Card Holder) Physical Requirements: Sitting, Standing, Squatting/Kneeling, Walking, Speaking, Hearing, Vision, Manual Dexterity, ability to work in somewhat confined spaces. Equal Employment Opportunity: Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status, or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits, and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. By submitting your resume or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation, or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to ***************.