Mechanic jobs in West Point, UT

Forklift Mechanic Full Time Intermountain Rigging Holdings Salt Lake City, Utah IRH is seeking skilled forklift mechanics to join our team. IRH specializes in rigging, machinery moving, millwright, heavy transportation, logistics, warehousing, trans-loading, packaging, and asset recovery services. IRH offers a competitive salary & outstanding benefits! Summary: The Forklift Mechanic will perform skilled and complex mechanical repairs. Perform the duties of a mechanic involved in inspecting, repairing, fabricating, rebuilding, and maintaining light and heavy-duty forklifts. Work is performed under the general supervision of the Shop Foreman Job Duties: Performs highly skilled and complex mechanical repairs on both light and heavy forklifts. Inspect forklifts, analyze, troubleshoot, and plan sequence of repair operations. Adjust or repair hydraulic, fuel and electrical systems and components. Test, and identify worn and damaged parts. Test, repair or install electrical systems and components. Test, repair or install hydraulic systems and components. Perform routine and scheduled maintenance on equipment. Test drive to diagnose or to verify corrections made. Perform state and federal safety inspections. Complete daily paperwork and repair orders. Requirements: 5 years' experience with forklift maintenance. Self-motivated, capable of accomplishing tasks independently without direct supervision. Must have a complete set of tools. Must have knowledge of hydraulic systems. Must be able to pass physical abilities test and a drug screen upon hire as well as random periodic screenings. Must be able to lift a minimum of 50 lbs. without assistance. Must have a clean driving record and be 21 years old or older for insurability purposes.

mechanic Compensation: $50,000.00 - $123,000.00 per year From flat tires and oil changes to rotor resurfacing and that weird clunking sound you've been hearing for a week, there are a lot of Big Oh Nos for your car. Luckily, Big O Tires has the Big O Yes for all of them. For over 50 years, our customers have trusted us to offer straight answers and reliable service. Big O Tires offers a wide range of diagnostic, repair and routine maintenance services, backed by one of the best national services warranties in the business. Most Big O Tires stores are individually owned and operated by franchisees, and each franchisee makes the staffing and hiring decisions for the individual location(s). However, the Big O franchisees are always looking for new faces with experience and desire to serve Big O Tires store customers. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to Big O Tires Corporate.

Persons employed as a GSE Mechanic is expected to: * Inspect and maintain ground support equipment used in operations. * Troubleshoot, repair and/or overhaul ground support equipment. * Check and service ground support equipment with fuel, water, oil and hydraulic fluid. * Diagnose problems using test equipment and applicable manuals. * Build and assemble machines or mechanical components according to requirements. * Inspect machines, engines, transmissions etc. and run diagnostic tests to discover functionality issues. * Conduct repairs aiming for maximum reliability. * Perform thorough maintenance on machinery, equipment and systems. * Clean and apply lubricants to machinery components. * Replenish fluids and components of engines and machinery. * Provide consultation on correct maintenance and preventative measures to machine or vehicle users. * Keep logs of work and report on issues * Completion of GSE paperwork as required. Unless the accommodation would impose an undue hardship on the operation of our business, we will endeavor to make a reasonable accommodation to the known limitations of a Team Member due to pregnancy, childbirth, and related medical conditions or of a qualified applicant with a disability. If reasonable accommodation is needed to perform essential job functions and/or to receive other benefits and privileges of employment, please contact (insert).

Persons employed as a GSE Mechanic is expected to: Inspect and maintain ground support equipment used in operations. Troubleshoot, repair and/or overhaul ground support equipment. Check and service ground support equipment with fuel, water, oil and hydraulic fluid. Diagnose problems using test equipment and applicable manuals. Build and assemble machines or mechanical components according to requirements. Inspect machines, engines, transmissions etc. and run diagnostic tests to discover functionality issues. Conduct repairs aiming for maximum reliability. Perform thorough maintenance on machinery, equipment and systems. Clean and apply lubricants to machinery components. Replenish fluids and components of engines and machinery. Provide consultation on correct maintenance and preventative measures to machine or vehicle users. Keep logs of work and report on issues Completion of GSE paperwork as required. Unless the accommodation would impose an undue hardship on the operation of our business, we will endeavor to make a reasonable accommodation to the known limitations of a Team Member due to pregnancy, childbirth, and related medical conditions or of a qualified applicant with a disability. If reasonable accommodation is needed to perform essential job functions and/or to receive other benefits and privileges of employment, please contact (insert). To perform this job successfully, an individual must be able to perform each essential job function satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. High School diploma or GED plus one (1) year experience and/or equivalent combination of education and experience Minimum of 18 years of age Ability to pass background checks (criminal and motor vehicle), drug tests, receive and maintain issuance of an airport security badge, and be insurable by the company's insurance policies. Must be legally authorized to work in the country of employment. Prior GSE or heavy equipment experience preferred. Must have your own tools. Must possess valid driver's license. Certification from a vocational school or completion of apprenticeship is a definite plus. Valid certification (ASE) preferred. Qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin or protected veteran status. The following are essential to the job, in addition to those listed above and on the chart in this description. Certain functions may be performed in varying weather and environmental conditions, such as precipitation, extreme temperatures, jet engine fumes, dust, and noise. The tasks are performed inside and outside near stationary and moving aircraft (including spinning propellers and engines). Frequently lift and/or move up to 75 pounds. Read, write and fluently speak and understand the English language. Ability to read and comprehend instructions, short correspondence and memos. Write routine business correspondence. Effectively present information in one-on-one and small group situations to customers, clients, supervisor and employees. Deal with problems involving several concrete variables in standardized situations. Apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Add, subtract, multiply and divide in all units of measure using whole numbers, common fractions and decimals. Excellent knowledge of machinery and hydraulic, electrical and other systems and their components Aptitude in using various hand tools (screwdrivers, hammers etc.) and precision measurement tools (e.g. calipers) Ability to follow established procedures and practices and read instruction, blueprints etc. A strong commitment to all health and safety guidelines Very good communication skills A problem-solving ability Very good physical strength and stamina

Services_AME-E524 Mechanic - Full Time - Salt Lake City (UT), United States Sulzer is a leading engineering company with a proud heritage of innovation. Join our global team to grow your expertise and develop innovative solutions that enable a prosperous and more sustainable society. We are looking for a Mechanic to join our Services_AME team in United States . Your main tasks and responsibilities: Assembling all types of pump equipment to customer, OEM and industry standard specifications Disassembling equipment to gain access remove, clean and inspect components Inspecting & recording component measurements using instruments, tools and gages and providing inspection report Investigating and determining root cause failure Determining proper materials for repairs as per BOM Contouring impellers and pump casings to meet hydraulic requirements Setting and operating dynamic balancing equipment Performing final testing and inspections To succeed in this role, you will need: Analytical and interpersonal skills Attention to detail Extensive knowledge of and ability to use hand tools, precision measuring and testing equipment and machine shop equipment Minimum five (5) years of pump repair experience Ability to work with limited supervision Ability to travel to and work at customer sites Ability to work overtime What we offer you: 15 days of paid time off and 12 company-paid holiday 401k plan with a 6% match Comprehensive health plan including medical, dental, vision, Life, short-term & long-term disability Motivating wellness program Employee Assistance Program Paid paternal leave Gym re-imbursement No visa or work permit support can be provided for this role Our team is looking forward hearing from you! Sulzer is an equal opportunity employer. We believe in the strength of a diverse workforce and are committed to offering an inclusive work environment. We are proud to be recognized as a Top Employer 2025 in he USA. [Not translated in selected language]

Are you looking for a unique opportunity? ISCO Industries is the industry leader in HDPE Fusion and is seeking a skilled Mechanic to become a part of our team. If you have a passion for ensuring machinery runs smoothly and a commitment to excellence, we want to hear from you. We are looking for great people with a strong work ethic who love to work with their hands. Pay Range: $25- $30/hour(Dependent on Experience) Alongside competitive pay, ISCO offers a benefits package including; medical/dental/vision, paid vacation, holidays, sick days, and a 401k! Mechanics are responsible for repairing fusion equipment in a distribution plant. Team members are provided all tools/equipment and PPE. Responsibilities * Diagnose mechanical, electrical and hydraulic issues. * Inspect, repair or replace parts as needed. * Perform preventive maintenance. * Remove and replace failed parts. * Maintain accurate records of all work performed. * Clearly able to communicate needed maintenance and repairs. Qualifications: * 5+ years experience as a mechanic * Automotive experience is a plus * Ability to read technical manuals and schematics * Proficient in diagnosing and repairing mechanical, electrical or hydraulic systems a plus. * Experience with preventive maintenance * Strong problem-solving skills * Basic computer proficiency * Team player with ability to work independently * Experience with preventive maintenance procedures and practices. * Physical demands: occasional lifting, standing, climbing is frequently required. Must be able to lift up to 50lbs on a regular basis Screening requirements include: A Physical, Drug Screen, and Criminal Background Check.

Our Trailer Mechanic position could be just the spot to start your career with XTRA Lease. If you have at least one year of experience working on trailers and brakes, possess a valid and current driver's license, and own your own tools, this job could be a good fit for you. As a Trailer Mechanic, your typical day would include: Diagnosing, servicing, and repairing all XTRA Lease equipment as indicated on repair orders and consistent with XTRA Lease repair standards. Performing safety and legally required inspections (FHWA/BIT). Maintaining parts and yard organization (with direction from operations management) to ensure a clean and safe working environment. Job Requirements: High School Diploma or GED (Preferred) Minimum of 1 year of experience working specifically on trailers Minimum of 1 year of experience working on brakes Must be qualified to complete FHWA inspections Must have a valid and current driver's license As a Trailer Mechanic, you'll need one year of trailer repair experience to complete FHWA inspections consistent with the Department of Transportation requirements. The people who succeed as Trailer Mechanics have knowledge of air, electronic, braking, and suspension systems as well as general knowledge of mechanical operation and body repair. Our employees enjoy consistent Monday - Friday schedules with little to no nights or weekends. About Us XTRA Lease is the leader in the truck-trailer rental industry in North America. We're not truckers, but we're proud to support the transportation industry. For more than 50 years, our team has focused on providing “the box” to trucking companies that supply manufacturing plants, grocery stores, and distribution centers with the products used in daily life. And as a subsidiary of Berkshire Hathaway, we have the financial backing to support our customers, and give our employees a level of stability that's hard to beat. Job Details: 40hr/week fixed Monday-Friday daytime schedule Benefits: If you are a regular full-time employee of XTRA, you are eligible to elect coverage under certain group benefit plans (medical, dental, vision, supplemental life, pre-paid legal plan, and health and dependent care (FSA) accounts). Your coverage under the group benefits begin on the 1st day of regular full-time employment. Employees are able to enroll in our company's 401k plan. You will receive 13 days of PTO, sick leave, and enjoy twelve paid holidays throughout the calendar year.

Our Trailer Mechanic position could be just the spot to start your career with XTRA Lease. If you have at least one year of experience working on trailers and brakes, possess a valid and current driver's license, and own your own tools, this job could be a good fit for you. As a Trailer Mechanic, your typical day would include: * Diagnosing, servicing, and repairing all XTRA Lease equipment as indicated on repair orders and consistent with XTRA Lease repair standards. * Performing safety and legally required inspections (FHWA/BIT). * Maintaining parts and yard organization (with direction from operations management) to ensure a clean and safe working environment. Job Requirements: * High School Diploma or GED (Preferred) * Minimum of 1 year of experience working specifically on trailers * Minimum of 1 year of experience working on brakes * Must be qualified to complete FHWA inspections * Must have a valid and current driver's license As a Trailer Mechanic, you'll need one year of trailer repair experience to complete FHWA inspections consistent with the Department of Transportation requirements. The people who succeed as Trailer Mechanics have knowledge of air, electronic, braking, and suspension systems as well as general knowledge of mechanical operation and body repair. Our employees enjoy consistent Monday - Friday schedules with little to no nights or weekends. About Us XTRA Lease is the leader in the truck-trailer rental industry in North America. We're not truckers, but we're proud to support the transportation industry. For more than 50 years, our team has focused on providing "the box" to trucking companies that supply manufacturing plants, grocery stores, and distribution centers with the products used in daily life. And as a subsidiary of Berkshire Hathaway, we have the financial backing to support our customers, and give our employees a level of stability that's hard to beat. Job Details: 40hr/week fixed Monday-Friday daytime schedule Benefits: If you are a regular full-time employee of XTRA, you are eligible to elect coverage under certain group benefit plans (medical, dental, vision, supplemental life, pre-paid legal plan, and health and dependent care (FSA) accounts). Your coverage under the group benefits begin on the 1st day of regular full-time employment. Employees are able to enroll in our company's 401k plan. You will receive 13 days of PTO, sick leave, and enjoy twelve paid holidays throughout the calendar year.

American Transportation Services has an immediate opening for qualified trailer/tractor mechanic. Qualified candidates must be a self-starter with the ability to work remotely with little to no supervision. We provide a friendly & stable work environment primarily focused on day shift hours M-F. Selected candidates will be responsible for maintaining trailering equipment as well as performing minor external repairs on yard spotting equipment (switchers) for a Fortune 500 package delivery company. We offer competitive wages, flexible hours, as well as the following fringe benefits: Company Paid Life Insurance Health insurance Dental insurance Vision insurance Company pays up to 70% of employee medical and up to 50% of dependent coverage 401K Retirement with company match Incentive based bonus program with each pay cycle. Paid vacation. Paid Holidays (upon completion 90 days of employment) Flexible schedule Training programs Opportunity to promote within Requirements: JOB REQUIREMENTS: Qualified Mechanic 1-3 years as a mechanic, ability to diagnosis and repair switchers, trailers, and converter dollies. Must be qualified to perform state and federal inspections. Experience in: trailer/mechanic (similar) a plus Responsibilities Include but not limited to: Perform FAI and State required inspections. Inspect and repair 'S' cam air brake systems. Diagnose and repair anti-lock brake systems. Perform repairs to commercial trailers and converter dollies in all potential aspects. Familiar with Cummins Insight Diverse diagnostic skills Roll-up Door experience Minor body work experience AC experience a plus

Job DescriptionBenefits: 401(k) Bonus based on performance Benefits/Perks Careers Advancement Opportunities Flexible Scheduling Competitive Compensation We are looking for a skilled Mechanic to join our busy repair shop. As an Auto Mechanic, you will assist our customers by diagnosing and repairing issues with vehicles performance and function. As an Auto Mechanic, you must have an in-depth understanding of all vehicle systems and components. You will also be responsible for maintaining repair shop equipment, preparing cost estimates, and maintaining a welcoming environment. The ideal candidate is skilled in communicating with customers, able to explain vehicle issues clearly and concisely and provide valuable advice. Responsibilities Diagnose and repair vehicles coming into the shop Carry out routine vehicle maintenance tasks such as tire rotations, oil changes, and brake pad replacements Conduct in-depth vehicle inspections of all systems, including engine, transmission, and brakes Create repair estimates and timelines and convey information to customers in an easy-to-understand manner Maintain accurate repair shop records and paperwork Ensure a high level of customer satisfaction and repeat business Qualifications 5+ years experience. Good driving recod. Must have your own tools and scanners. Strong customer service and communication skills are required

Job Title: Journeyman Mechanic Division: Equipment Supervisor: Shop Foreman Job Summary: Under limited supervision from the shop foreman, the journeyman mechanic is responsible for performing work of considerable difficulty in the repair and maintenance of vehicles and equipment and overseeing special projects. Duties and Responsibilities: * Visualize, fulfill, and implement the company vision and core values. * Perform duties of a mechanic class 2. * Direct the work of several projects. * Welding and fabrication. * Diagnose, rebuild, and repair vehicles and equipment; perform major engine and transmission repairs and replacements as well as electrical diagnosis. * Perform plant inspections, diagnose any problems, and perform plant maintenance, including electrical. * Complete major road calls and perform field repairs. * Perform inspections and preventive maintenance of vehicles and equipment. * Prepare and maintain records and reports. * Maintain tools as required to do the job. * Operate forklift. * Maintain insurable driving record. * Ensure a safe and healthful work environment at all time. Education and/or Experience: * High school diploma or general education degree (GED). * Three years journeyman experience and/or two year diesel mechanic certificate preferred. * Maintain a commercial driver's license (CDL) and department of transportation (DOT) medical card, preferred but not required. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. * Sitting: 20% of the time * Standing: 85% of the time * Driving: 15% of the time * Weight lifted: Up to 50 pounds * Physical Movement: Will frequently kneel, stoop, crouch, crawl, bend or twist body, use hands to handle, control, or feel objects, tools, or controls, stretch, bend, push pull, lift, or carry heavy objects, support body for long periods of time. * Speaking / Listening: Needs to be able to communicate effectively with supervision, follow instructions, and understand safety requirements. Needs to be able to hear sounds and recognize difference between them as well as focus on one source of sound and ignore others. * Working Conditions: Exposed to hazardous equipment, situations, and conditions. Sometimes will work outdoors at work site and indoors in the repair shop, exposed to all weather conditions. Will also be exposed to sounds and noise levels that are uncomfortable and a variety of lighting conditions, from dim to light. Knowledge, Skills, and Abilities: * Attention and commitment to safety * Ability to work well with others in a team environment * Ability to work long hours * Ability to move 50 pounds * Ability to operate heavy equipment. * Knowledge of diesel engines, transmissions, electronics, and familiar with components associated with them * Skilled in welding, cutting, and fabrication. * Knowledge of plants, set up, and movement * Knowledge of boiler systems and operations * Knowledge of towing, recovery, lifting, and rigging * Knowledge of conveyor systems * Knowledge of fuel and fueling systems * Vast knowledge of complex electrical systems on vehicles/ equipment * Vast knowledge of complex hydraulic systems Training and Development: * New Employee Orientation * Defensive Driving * Customer Service * Mine Safety and Health Administration (MSHA) * Brake repair training and certification. * Fall Protection * Lock Out/ Tag Out * Confined Space * Forklift Certification Apply on-line at genevarock.com/careers/ today! * Current employees are required to speak with their immediate manager before applying for any open positions.* Referral Program: Current employees who refer qualified candidates prior to candidate interviews, will be eligible to receive referral bonuses should their candidate be hired. A $250 bonus will be awarded at the end of each 90-day period up to one year for referred new hires in good standing (for a possible total of $1,000). Geneva Rock Products, Inc. is an "Equal Employment Opportunity/Affirmative Action/PWDNET" Employer Disclaimer: This is not intended to contain a comprehensive listing of duties and responsibilities required of the employee. It reflects management's assignment of key functions; it does not prescribe or limit the tasks that may be assigned. Job descriptions are subject to change at any time. Geneva Rock is a drug free environment. Requisition Post Information* : Post End Date 12/20/2025

Job Title: Journeyman Mechanic Division: Equipment Supervisor: Shop Foreman Job Summary: Under limited supervision from the shop foreman, the journeyman mechanic is responsible for performing work of considerable difficulty in the repair and maintenance of vehicles and equipment and overseeing special projects. Duties and Responsibilities: Visualize, fulfill, and implement the company vision and core values. Perform duties of a mechanic class 2. Direct the work of several projects. Welding and fabrication. Diagnose, rebuild, and repair vehicles and equipment; perform major engine and transmission repairs and replacements as well as electrical diagnosis. Perform plant inspections, diagnose any problems, and perform plant maintenance, including electrical. Complete major road calls and perform field repairs. Perform inspections and preventive maintenance of vehicles and equipment. Prepare and maintain records and reports. Maintain tools as required to do the job. Operate forklift. Maintain insurable driving record. Ensure a safe and healthful work environment at all time. Education and/or Experience: High school diploma or general education degree (GED). Three years journeyman experience and/or two year diesel mechanic certificate preferred. Maintain a commercial driver's license (CDL) and department of transportation (DOT) medical card, preferred but not required. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Sitting: 20% of the time Standing: 85% of the time Driving: 15% of the time Weight lifted: Up to 50 pounds Physical Movement: Will frequently kneel, stoop, crouch, crawl, bend or twist body, use hands to handle, control, or feel objects, tools, or controls, stretch, bend, push pull, lift, or carry heavy objects, support body for long periods of time. Speaking / Listening: Needs to be able to communicate effectively with supervision, follow instructions, and understand safety requirements. Needs to be able to hear sounds and recognize difference between them as well as focus on one source of sound and ignore others. Working Conditions: Exposed to hazardous equipment, situations, and conditions. Sometimes will work outdoors at work site and indoors in the repair shop, exposed to all weather conditions. Will also be exposed to sounds and noise levels that are uncomfortable and a variety of lighting conditions, from dim to light. Knowledge, Skills, and Abilities: Attention and commitment to safety Ability to work well with others in a team environment Ability to work long hours Ability to move 50 pounds Ability to operate heavy equipment. Knowledge of diesel engines, transmissions, electronics, and familiar with components associated with them Skilled in welding, cutting, and fabrication. Knowledge of plants, set up, and movement Knowledge of boiler systems and operations Knowledge of towing, recovery, lifting, and rigging Knowledge of conveyor systems Knowledge of fuel and fueling systems Vast knowledge of complex electrical systems on vehicles/ equipment Vast knowledge of complex hydraulic systems Training and Development: New Employee Orientation Defensive Driving Customer Service Mine Safety and Health Administration (MSHA) Brake repair training and certification. Fall Protection Lock Out/ Tag Out Confined Space Forklift Certification Apply on-line at genevarock.com/careers/ today! *Current employees are required to speak with their immediate manager before applying for any open positions.* Referral Program: Current employees who refer qualified candidates prior to candidate interviews, will be eligible to receive referral bonuses should their candidate be hired. A $250 bonus will be awarded at the end of each 90-day period up to one year for referred new hires in good standing (for a possible total of $1,000). Geneva Rock Products, Inc. is an “Equal Employment Opportunity/Affirmative Action/PWDNET” Employer Disclaimer: This is not intended to contain a comprehensive listing of duties and responsibilities required of the employee. It reflects management's assignment of key functions; it does not prescribe or limit the tasks that may be assigned. Job descriptions are subject to change at any time. Geneva Rock is a drug free environment. Requisition Post Information* : Post End Date 12/20/2025

Job DescriptionSalary: Competitive pay and benefits with a pay scale range of $28-$40/hr, based on experience. We also provide incentives for career advancement, such as obtaining your IA. Hiring in SPK and BTF! Airframe & Power Plant (A&P) Mechanic Are you passionate about general aviation? At FLT Academy, smooth processes and systems are the key to our success. Our team of qualified A&P mechanics are the backbone of our organization. We believe in supporting our mechanics with the necessary specialized tooling to maintain our fleet of aircraft. Our mechanics work seamlessly with flight operations to keep our aircrafts in pristine condition. Come join our team in building the next generation of the aviation industry! JOB RESPONSIBILITIES Repairs, and modifies, to worn or defective assemblies, making alterations or changes to units. Follows approved maintenance procedures for subject components or system, consulting procedures that have been FAA approved, original equipment manufacturers (OEM's) technical data, and work package instructions. Consults the Maintenance Lead if technical assistance is needed during the repair process. Inspects completed work before signoff, to identify if any additional work is needed to ensure that repaired components meet prescribed standards and tolerances. Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer. Completes work package documentation by signing after finishing all designated operations. Submits completed/in-progress work to Maintenance Lead for review; submits for final/in-progress inspection to keep the aircraft/component in an airworthy condition. Properly accounts for time, materials and tools used in all inspection and maintenance activities. ESSENTIAL KNOWLEDGE, SKILLS AND ABILITIES Perform maintenance work on a variety of general aviation aircraft. Complete routine inspections and troubleshooting using approved or accepted data issued by the manufacturer or FAA. Finalize all necessary paperwork in accordance with company, manufacturer, and FAA requirements. Collaborate with appropriate maintenance personnel. Ability to interpret and comprehend manufacturer and FAA approved work package instructions; ability to inspect and install parts/components. REQUIRED QUALIFICATIONS Must have a current A&P license, high school diploma or equivalent with additional courses in aircraft maintenance. Must have required tools. Physical requirements include climbing ladders, lifting heavy objects, working on your feet for many hours per day. Strong communication, organizational and problem-solving skills Knowledge of FAA requirements for aircraft maintenance procedures PREFERRED QUALIFICATIONS Two years of experience as an Aircraft Maintenance Technician on general aviation aircraft

Job title A&P Mechanic; [23021 - Aircraft Mechanic I] Salt Lake City, UT Reports to Director of Maintenance Job purpose Alpine Air is currently seeking full time A&P Mechanics to join the crew at the Salt Lake City, Utah airport. Candidates must meet our high standard of excellence for safety, resource management skills, and customer relations. Candidates must have strong interpersonal skills and a team player attitude. Duties and responsibilities The selected applicant will be responsible for but not limited to the following duties: Preventative maintenance of aircraft Line maintenance and repair Scheduled inspection of aircraft Replacing worn or damaged components, including turbine engine changes Basic mechanical and electrical troubleshooting Repairing, replacing, and rebuilding aircraft structures, including repairs involving aircraft sheet metal Qualifications Qualifications include: Must have A & P License Must have 2 years' experience as an A&P, with recent turboprop aircraft Preference given to Beech 1900 or King Air experience Knowledgeable of basic fixed wing aircraft maintenance Ability to locate and follow maintenance manual directions and component manuals Basic computer skills, including Microsoft Word Must pass background check and pre-employment drug screen Must have High School Diploma or Equivalent Must be eligible to work in the U.S. Working conditions While performing the duties of this job, the employee is frequently exposed to moving mechanical parts, fumes, toxic chemicals, and heat. Work for this position is performed outside, regardless of weather conditions. The noise level in the work environment is usually moderate. Compensation This position is a Full-Time position, 35-40 hours per week. Alpine Air offers competitive compensation and benefits with generous Paid Time Off, eight (8) paid holidays per year, Medical, Dental, Vision, Life Insurance, and 401(k) with employer match are available immediately upon employment. Physical requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 70 pounds. The employee must be able to frequently bend, twist, lift, and practice safe lifting methods. Specific vision abilities required by this job include close vision, distance vision, color vision, and ability to adjust focus. Approved by: Max Crandall - Director of Human Resources Date approved: 03/02/2022 Reviewed: 03/02/2022 ALPINE AIR IS AN EQUAL OPPORTUNITY/AFFIRMATIVE ACTION EMPLOYER. Prospective employees will receive consideration for employment without discrimination on the basis of race, color, religion, sex, age, national origin, ancestry, disability, veteran status, or any other factor prohibited by law or regulation. Potential candidates will be required to pass a pre-employment drug test prior to receiving an offer of employment. This employer participates in E-verify. Alpine Air will provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's I-9 to confirm work authorization.

Dillon Toyota Lift is launching a 3-6 month paid apprenticeship for individuals who are mechanically inclined and looking for a career path with growth potential. Tools Provided We will provide tools during the apprenticeship program What You'll Learn Basic forklift repair, maintenance, and inspections Troubleshooting mechanical, electrical, and hydraulic systems Safe tool use, diagnostics, and customer service in the field How to complete service work orders What We're Looking For Mechanical interest (auto, diesel, small engine, shop classes, or hands-on experience) Reliability, willingness to learn, and a can-do attitude. Friendly out-going personality. Valid driver's license + ability to lift 50-75 lbs and work on your feet Previous automotive/equipment experience is a bonus, not required Why Dillon Toyota Lift Tools provided upon program completion Paid training + clear path into a Field Service Technician role Career advancement across Service, Parts, Sales & Operations Supportive team and long-term career stability Company supplied Service Van Schedule Full-time, Monday-Friday between 7 a.m. and 5 p.m. Based in Salt Lake City with training in the shop and in the field. Ready to Start Your Career? Apply with your resume and a brief note about why you're interested in the apprenticeship. If you decide the program isn't for you and leave early, you'll just pay back the cost of the tools.

Pay Type: Hourly Estimated Wage Range $23.23 - $31.57/Hourly Amrize is building North America. From bridges and railways to data centers, schools, offices and homes, our solutions are inside the buildings and infrastructure that connect people and advance how we live. And we invite you to come and build with us. As the partner of choice for professional builders, we offer advanced branded solutions from foundation to rooftop. Wherever our customers are, whatever their job, we're ready to deliver. Our 19,000 colleagues work across 1,000 sites supported by an unparalleled distribution network. Infrastructure, commercial and residential, new build, repair and refurbishment: We're in every construction market. Amrize listed on the New York Stock Exchange and the SIX Swiss Exchange on June 23, 2025, following our spinoff as an independent company. Join us and build _your_ ambition. Learn more at ********************** (****************************************** Description: **Location:** Coalville UT **Job Req ID:** 14801 Join our amazing team and contribute as a: Mobile Equipment Mechanic **ABOUT THE ROLE** This position is primarily responsible for maintaining the mobile equipment fleet in a state of readiness. Performs the appropriate vehicle/mobile equipment inspections and preventative maintenance. Performs required vehicle/mobile equipment repair maintenance. Informs supervisor of vehicle condition that could impact production. Prepares all required daily/weekly plant operating reports. **WHAT YOU'LL ACCOMPLISH** + Tests mechanical products and equipment to ensure proper performance, and compliance with manufacturer's specifications + Repairs and replaces damaged, worn parts + Operates and inspects heavy equipment in order to diagnose defects + Diagnoses faults or malfunctions to determine required repairs, using engine diagnostic equipment such as computerized test equipment and calibration devices + Dismantles and reassembles heavy equipment using hoists and hand tools + Cleans, lubricates and performs routine maintenance work on equipment and vehicles + Examines parts for damage and excessive wear, using micrometers or gauges + Schedules maintenance for industrial machines and equipment, and keeps equipment service records + Reads and interprets manuals, blueprints and technical drawings + Analyzes information and evaluates results to choose the best solution and solve problems + Stays abreast of new technology and methodology through on-the-job training and technical schools + Adheres to all safety protocol to include confined space entry, lock-out-tag-out, working at heights, wearing appropriate safety glasses, gloves and other personal protective equipment, as well as all OSHA, MSHA requirement + Ability to work shifts as required + Other duties as assigned + Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors. **WHAT WE'RE LOOKING FOR** + **Education** : High school diploma or equivalent + **Required Work Experience** : 3 years of experience servicing relevant heavy industrial equipment + **Travel Requirements** : Local travel **Additional Requirements:** + Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests. **WHAT WE OFFER** + Competitive salary + Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings + Medical, Dental, Disability and Life Insurance + Holistic Health & Well-being programs + Health Savings Accounts (HSAs) & Flexible Spending Accounts (FSAs) for health and dependent care + Vision and other Voluntary benefits and discounts + Paid time off & paid holidays + Paid Parental Leave (maternity & paternity) + Educational Assistance Program + Dress for your day **BUILDING INCLUSIVE WORKSPACES** At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email recruiting-accommodations@amrize.com . This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted. **Nearest Major Market:** Salt Lake City

As a mechanic, you will perform work of considerable difficulty in the repair and maintenance of vehicles, semis, trailers, and equipment. Performing inspections, diagnostics, and repairs. You will also perform related work as assigned. ESSENTIAL DUTIES AND RESPONSIBILITIES/ other duties as assigned… Know how to operate specific mechanical systems including electronics, hydraulics, and air brakes. Running diagnostics on different vehicles and equipment. (Cummins, Ford Power Stroke, etc.) Regular inspections and scheduled maintenance. Complete any repairs that are needed such as repairing worn-out machine parts, etc. Daily maintenance and repair logs. Removes unsafe equipment from facility operating area and notifies supervisor. Performs other related duties as assigned. KNOWLEDGE, ABILITIES, AND SKILLS REQUIREMENTS... 3+ years mechanic experience Must own their own tools. Knowledge in the repairs semi-trucks/trailers Experience working with air brakes, electrical, fuel systems and hydraulics. Must be qualified to perform a DOT inspection on trucks and trailers. Be able to complete a 90-day BIT inspection. Ability to use hand and power tools to repair trucks and trailers. Ability to read repair manuals. Valid driver's license. Excellent mechanical repair skills. Ability to follow instructions. Analytical and problem-solving skills. Must be able to operate a computer.

Job Title: Journeyman Mechanic Division: Equipment Supervisor: Shop Foreman Job Summary: Under limited supervision from the shop foreman, the journeyman mechanic is responsible for performing work of considerable difficulty in the repair and maintenance of vehicles and equipment and overseeing special projects. Duties and Responsibilities: * Visualize, fulfill, and implement the company vision and core values. * Perform duties of a mechanic class 2. * Direct the work of several projects. * Welding and fabrication. * Diagnose, rebuild, and repair vehicles and equipment; perform major engine and transmission repairs and replacements as well as electrical diagnosis. * Perform plant inspections, diagnose any problems, and perform plant maintenance, including electrical. * Complete major road calls and perform field repairs. * Perform inspections and preventive maintenance of vehicles and equipment. * Prepare and maintain records and reports. * Maintain tools as required to do the job. * Operate forklift. * Maintain insurable driving record. * Ensure a safe and healthful work environment at all time. Education and/or Experience: * High school diploma or general education degree (GED). * Three years journeyman experience and/or two year diesel mechanic certificate preferred. * Maintain a commercial driver's license (CDL) and department of transportation (DOT) medical card, preferred but not required. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. * Sitting: 20% of the time * Standing: 85% of the time * Driving: 15% of the time * Weight lifted: Up to 50 pounds * Physical Movement: Will frequently kneel, stoop, crouch, crawl, bend or twist body, use hands to handle, control, or feel objects, tools, or controls, stretch, bend, push pull, lift, or carry heavy objects, support body for long periods of time. * Speaking / Listening: Needs to be able to communicate effectively with supervision, follow instructions, and understand safety requirements. Needs to be able to hear sounds and recognize difference between them as well as focus on one source of sound and ignore others. * Working Conditions: Exposed to hazardous equipment, situations, and conditions. Sometimes will work outdoors at work site and indoors in the repair shop, exposed to all weather conditions. Will also be exposed to sounds and noise levels that are uncomfortable and a variety of lighting conditions, from dim to light. Knowledge, Skills, and Abilities: * Attention and commitment to safety * Ability to work well with others in a team environment * Ability to work long hours * Ability to move 50 pounds * Ability to operate heavy equipment. * Knowledge of diesel engines, transmissions, electronics, and familiar with components associated with them * Skilled in welding, cutting, and fabrication. * Knowledge of plants, set up, and movement * Knowledge of boiler systems and operations * Knowledge of towing, recovery, lifting, and rigging * Knowledge of conveyor systems * Knowledge of fuel and fueling systems * Vast knowledge of complex electrical systems on vehicles/ equipment * Vast knowledge of complex hydraulic systems Training and Development: * New Employee Orientation * Defensive Driving * Customer Service * Mine Safety and Health Administration (MSHA) * Brake repair training and certification. * Fall Protection * Lock Out/ Tag Out * Confined Space * Forklift Certification Apply on-line at genevarock.com/careers/ today! * Current employees are required to speak with their immediate manager before applying for any open positions.* Referral Program: Current employees who refer qualified candidates prior to candidate interviews, will be eligible to receive referral bonuses should their candidate be hired. A $250 bonus will be awarded at the end of each 90-day period up to one year for referred new hires in good standing (for a possible total of $1,000). Geneva Rock Products, Inc. is an "Equal Employment Opportunity/Affirmative Action/PWDNET" Employer Disclaimer: This is not intended to contain a comprehensive listing of duties and responsibilities required of the employee. It reflects management's assignment of key functions; it does not prescribe or limit the tasks that may be assigned. Job descriptions are subject to change at any time. Geneva Rock is a drug free environment.

Job DescriptionSalary: Competitive pay and benefits with a pay scale range of $28-$40/hr, based on experience. We also provide incentives for career advancement, such as obtaining your IA. Airframe & Power Plant (A&P) Mechanic Are you passionate about general aviation? At FLT Academy, smooth processes and systems are the key to our success. Our team of qualified A&P mechanics are the backbone of our organization. We believe in supporting our mechanics with the necessary specialized tooling to maintain our fleet of aircraft. Our mechanics work seamlessly with flight operations to keep our aircrafts in pristine condition. Come join our team in building the next generation of the aviation industry! JOB RESPONSIBILITIES Repairs, and modifies, to worn or defective assemblies, making alterations or changes to units. Follows approved maintenance procedures for subject components or system, consulting procedures that have been FAA approved, original equipment manufacturers (OEM's) technical data, and work package instructions. Consults the Maintenance Lead if technical assistance is needed during the repair process. Inspects completed work before signoff, to identify if any additional work is needed to ensure that repaired components meet prescribed standards and tolerances. Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer. Completes work package documentation by signing after finishing all designated operations. Submits completed/in-progress work to Maintenance Lead for review; submits for final/in-progress inspection to keep the aircraft/component in an airworthy condition. Properly accounts for time, materials and tools used in all inspection and maintenance activities. ESSENTIAL KNOWLEDGE, SKILLS AND ABILITIES Perform maintenance work on a variety of general aviation aircraft. Complete routine inspections and troubleshooting using approved or accepted data issued by the manufacturer or FAA. Finalize all necessary paperwork in accordance with company, manufacturer, and FAA requirements. Collaborate with appropriate maintenance personnel. Ability to interpret and comprehend manufacturer and FAA approved work package instructions; ability to inspect and install parts/components REQUIRED QUALIFICATIONS Must have a current A&P license, high school diploma or equivalent with additional courses in aircraft maintenance. Must have required tools. Physical requirements include climbing ladders, lifting heavy objects, working on your feet for many hours per day. Strong communication, organizational and problem-solving skills Knowledge of FAA requirements for aircraft maintenance procedures PREFERRED QUALIFICATIONS Two years of experience as an Aircraft Maintenance Technician on general aviation aircraft