Maintenance Supervisor jobs at Management Recruiters International(MRI) - 3829 jobs

IWS Maintenance Supervisor Employment Type: Full-Time (Direct Hire) Salary: $90,000-$105,000 About the Role We are seeking a highly motivated and technically strong IWS (Integrated Work System) Maintenance Supervisor to drive maintenance excellence and equipment reliability within our manufacturing operations. This role plays a critical part in implementing and continuously improving world-class maintenance systems, developing high-performing teams, and eliminating breakdown losses through structured problem-solving and IWS methodologies. The IWS Maintenance Supervisor will serve as the owner of maintenance performance for an assigned production cell, acting as both a technical expert and a coach. You will lead the deployment of Maintenance Planning & Scheduling (MPS), Breakdown Elimination (BDE), and Daily Management Systems (DMS), while building sustainable capability across operations and maintenance teams. Key Responsibilities Own the elimination of maintenance and breakdown-related losses for the assigned production cell. Lead and sustain the Progressive Maintenance (PM) system and IWS pillars within the maintenance function. Facilitate structured root cause analysis for equipment failures using IWS tools such as IPS, 5 Whys, UPS, Dice Charts, and failure analysis. Develop and execute short-term (24-hour) and mid-term (up to 90-day) action plans in collaboration with Cell Leads and line teams. Establish, maintain, and continuously improve Daily Management Systems (DMS), including Breakdown Elimination and Maintenance Planning & Scheduling. Coach and develop line teams to become self-sufficient by strengthening technical skills, problem-solving capability, and adherence to standards. Create and maintain maintenance standards, One Point Lessons (OPLs), and best practices to ensure knowledge sharing and process consistency. Support capital projects, equipment installations, and upgrades by contributing to planning, risk assessment, and technical readiness. Drive the effective use of Progressive Maintenance tools, PM cards, and reliability methodologies to improve equipment performance and uptime. Serve as a continuity link between maintenance, operations, and other IWS pillars to ensure alignment with site and business objectives. Qualifications Technical degree or equivalent education in Mechanical, Electrical, Electronics, or Industrial Automation. Minimum of 3 years of experience in a manufacturing or production environment in a maintenance, reliability, or continuous improvement role. Strong working knowledge of time-based and condition-based maintenance, TPM or similar systems, and root cause failure analysis. Experience with maintenance planning & scheduling, spare parts management, and reliability improvement practices. Proficiency in MS Office (Excel, PowerPoint, Word). Fluent in English, both written and spoken. Demonstrated ability to coach teams, lead change, and drive structured problem-solving in a fast-paced industrial environment. What We Offer Competitive base salary with annual performance-based bonus Employee Stock Purchase Plan Comprehensive Medical, Dental, and Vision coverage for employees and family members Matching 401(k) Paid Time Off (PTO) Paid Family Leave (up to 20 weeks) Short-Term and Long-Term Disability Insurance Life Insurance Education and Tuition Assistance Personal Development and Career Growth Opportunities Flexible dress code Snacks and drinks on site Company events and office celebrations Volunteering and community involvement opportunities Employee Assistance Program (EAP) with counseling support for employees and family members Why Join Us? This is an opportunity to play a key leadership role in building a world-class maintenance and reliability culture. You will work in a structured, continuous-improvement environment where your technical expertise, coaching ability, and problem-solving skills directly impact performance, safety, and operational excellence.

The Maintenance Manager is responsible for leading and managing the maintenance function within a high-volume beverage production facility. This role ensures equipment reliability, operational safety, and cost-effective maintenance practices while supporting continuous production. The position oversees a team of approximately 10+ union and non-union employees. Key Responsibilities Lead, manage, and develop the maintenance team, including hiring, training, scheduling, performance management, discipline, and overtime approval Partner with plant leadership to support production goals, budget planning, and operational efficiency Maintain a safe, compliant, and productive work environment; enforce company safety policies and investigate incidents as required Establish and uphold maintenance performance standards and best practices Oversee preventive and corrective maintenance programs, including use of PM tracking software for work orders and parts Supervise maintenance of high-speed beverage filling and packaging equipment across multiple carbonated soft drink lines producing 20+ million cases annually Ensure breakdowns and repairs are addressed safely, efficiently, and with minimal downtime Manage maintenance-related costs, including labor, inventory, purchasing, and outsourced repairs Review and analyze maintenance and production reports to identify trends and drive improvements Support purchasing of equipment, tools, and spare parts Ensure maintenance data, documentation, and records are accurate and available when needed Maintain professional relationships with employees, vendors, suppliers, and contractors Required Experience & Qualifications Bachelor's degree in a related field with 5+ years of experience maintaining high-speed beverage filling and packaging equipment or 10+ years of relevant maintenance experience in lieu of a degree Experience in carbonated soft drink production environments (highly desired) Proficiency with Microsoft Office (Word, Excel, PowerPoint) Prior experience working in a union environment

What You Bring: 10+ years of hands-on technical and leadership experience in fast-paced industrial manufacturing environments Bachelor's degree in Mechanical, Industrial, or a related Engineering discipline Proven leader with a track record of coaching, developing, and elevating high-performing teams Deep expertise in CMMS and Reliability-Centered Maintenance, with the ability to translate data into decisive action Strong Root Cause Analysis capabilities and a passion for building durable, failure-resistant systems U.S. citizen or green card holder What You'll Get: A premium, family-focused benefits package Competitive performance bonus, PTO, 401(k) with company match, and relocation support A clear, intentional career path with meaningful growth and leadership opportunity A high-velocity manufacturing environment where your decisions drive results, and your leadership makes a visible impact

You will oversee daily maintenance operations, perform advanced repairs, and guide on-site techs to ensure high-quality service throughout the community. Responsibilities To lead maintenance operations and mentor on-site techs To troubleshoot and repair HVAC, electrical, plumbing, and appliances To complete work orders and manage preventative maintenance To ensure safety and quality standards across the property To prepare units for move-ins and handle advanced maintenance needs Required Skills & Qualifications EPA Type II or Universal Certification (required) Previous multifamily/apartment maintenance experience Ability to lead a team in a fast-paced environment Strong troubleshooting and repair skills Must have own tools Benefits Through BGSF: Weekly pay Health, dental, and vision insurance options PTO or sick leave (as applicable per state/local law) Referral bonuses BGSF is an Equal Opportunity Employer. We are committed to providing equal opportunities for employment to all qualified people, regardless of race, color, national origin, religion, sex, age, disability status, veteran status, genetic information, or any other characteristic protected by applicable federal, state, or local law.

The Fleet Maintenance Manager oversees the distribution center garage and directs a team of skilled mechanics responsible for inspecting, maintaining, and repairing tractors, trailers, automobiles, and light trucks. This role ensures all equipment is in good working order and compliant with all operational and safety guidelines. The Manager develops the operating plan and budget for the garage and is accountable for achieving overall operating results consistent with individual and company performance goals. Job Description Description + Team Leadership and Development: Oversee and direct a team of skilled mechanics and a fleet maintenance supervisor where applicable, ensuring ongoing skills development and performance coaching. Recruit and develop fleet technicians, manage outside vendors, and coach vehicle operators. Conduct performance appraisals, provide training, and ensure equal opportunities for professional advancement. + Maintenance and Inspections: Oversee equipment inspections, preventative maintenance schedules, and services. Review vehicle and equipment failures, taking corrective action as needed to ensure reliable and safe operation. Recommend replacement of vehicles and equipment based on service and maintenance cost assessments. + Operational Planning and Budgeting: Develop and implement the operating plan and budget for the garage. Review and finalize budgets with senior leadership, and ensure achievement of budgetary and service goals through effective work processes. + Safety and Compliance: Lead the maintenance of safe work practices and conditions, ensuring a clean and safe environment in accordance with company policies and health and safety regulations. Maintain accurate and complete records of maintenance and repairs, compliant with federal, state, and local regulations. + Inventory and Purchasing Management: Manage the purchasing and inventory of fuels, lubricants, tires, and parts. Ensure costs are managed within budgets and operational needs, maintaining accurate records of all transactions. + Process Improvement: Assess productivity trends and direct the allocation of resources to meet maintenance and repair demands. Lead the development of improved work processes and procedures to enhance the productivity and effectiveness of work teams, equipment, and garage space. + Travel Required:Yes Environment + Warehouse : Grocery Warehouse (50F to 90F) Skills + Specialized Knowledge : D.O.T. qualified to drive CMV; Extensive experience and skill in vehicle and equipment maintenance related to distribution, warehouse, and transportation; Adept at preparing and delivering an address or presentation in a business setting. + Special Skills : Strong leadership skills including team facilitation, training, and motivation; Good PC skills including experience using windows, word processing, spreadsheet, and email software; Strong analytical skills and good problem solving skills; Ability to handle multiple tasks, organize and coordinate activities effectively in complex situations + Physical abilities: : + Other: : High standard of integrity and reliability Years Of Experience + 7-10 : Vehicle and equipment maintenance, parts and fuel management, transportation or an equivalent combination of education and experience. + 7-10 : Extensive technical knowledge and skills related to internal combustion, diesel, and electric powered vehicles Qualifications Bachelor's Degree - General Studies, High School Diploma - General Studies Shift 2nd Shift (United States of America) Company C&S Wholesale Grocers, LLC About Our Company C&S Wholesale Grocers, LLC is an industry leader in supply chain solutions and wholesale grocery supply in the United States. Founded in 1918 as a supplier to independent grocery stores, C&S now services customers of all sizes, supplying more than 7,500 independent supermarkets, chain stores, military bases and institutions with over 100,000 different products. C&S also proudly operates and supports corporate grocery stores and services independent franchisees under a chain-style model throughout the Midwest, South and Northeast. We are an engaged corporate citizen, supporting causes that positively impact our communities. Working Safely is a Condition of Employment at C&S Wholesale Grocers, LLC. C&S Wholesale Grocers is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. The Company provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Company: C&S Wholesale Grocers, LLC Job Area: Warehouse Operations Job Family: Transportation Job Type: Regular Job Code: JC0418 ReqID: R-265448

Lead Maintenance Supervisor - Haslet, TX 76052 Step into a leadership role where you will guide maintenance operations, ensure safe and efficient property upkeep, and use your EPA certification to support HVAC needs. This is a strong contract-to-hire opportunity for an experienced maintenance leader. Job Description To lead daily maintenance operations across the property To diagnose and repair HVAC systems as certified To complete general maintenance and work orders To oversee unit turns and safety compliance To mentor maintenance staff and support property needs Schedule Monday-Friday, 8am-5pm Pay $25-26/hr, based on experience Contract-to-hire Required Skills EPA Type II or Universal certification Maintenance leadership or supervisor experience Strong HVAC knowledge Ability to complete general repairs independently Benefits Through BGSF: Weekly pay Health, dental, and vision insurance options PTO or sick leave where applicable per state/local law Referral bonuses BGSF is a staffing firm, nationwide #ZIPC BGSF is an Equal Opportunity Employer. We are committed to providing equal opportunities for employment to all qualified people, regardless of race, color, national origin, religion, sex, age, disability status, veteran status, genetic information, or any other characteristic protected by applicable federal, state, or local law.

The Company: Our client is a growing solar manufacturing company and they are seeking an experienced Maintenance Supervisor to lead their maintenance operations in a highly automated production environment. This role is ideal for a hands-on leader who can balance people leadership, equipment reliability, and continuous improvement. Key Responsibilities Plan, schedule, and supervise maintenance activities for production equipment Oversee installation, testing, maintenance, and repair of automated systems Troubleshoot equipment failures and implement corrective/preventive actions Support and maintain PM/PD programs using CMMS software Coordinate with production, engineering, and leadership on process improvements Monitor parts inventory, costs, and departmental budgets Lead continuous improvement initiatives and report progress to management Provide hands-on technical support to production teams as needed Ensure compliance with safety, environmental, and regulatory requirements Develop, motivate, and lead a team of maintenance technicians Qualifications Required: 2-3+ years of experience in a maintenance leadership role (18+ direct reports) Strong mechanical and electrical troubleshooting skills Ability to read electrical, mechanical, pneumatic, and hydraulic schematics Working knowledge of PLCs and industrial PCs (Siemens Step 7, Beckhoff TwinCAT) Experience with CMMS, scheduling, reporting, and resource planning Proficiency in Microsoft Office Project management experience Willingness to work overtime as needed Nice to have: Bachelor's degree in Engineering or related field (or equivalent experience) Experience with ABB robots Background in highly automated manufacturing environments Some fabrication experience

ALPLA's Lima, OH manufacturing site is looking for a Maintenance Manager. ALPLA is a global family-owned, privately held company that makes innovative, customized, recycled packaging for top companies such as P&G, Unilever, L'Oréal, Pepsi, Henkel, Chobani and more. ALPLA values their employees, work-life balance, personal growth, compensation and sustainability. What Can You Expect From ALPLA Health and Wellness Care Program- Benefits Child Care Benefits Dependent Care Cost Savings Program Recognition programs; Promotional opportunities 401K Retirement Plan and excellent Matching Plan Medical, dental, vision plan Education assistance program/tuition reimbursement Short term, long term and life insurance paid by ALPLA Paid vacation; paid holidays What You Will Enjoy Doing Ensures and reinforces the exercise of the Health and Safety Program Services and maintains machines on site Ensures preventive maintenance is performed Ensures machine breakdowns are repaired Ensures current and accurate record of maintenance Ensures all relevant machines, devices are updated according to ALPLA standards Serve as the main contact of the Operational Technology Integration Specialist to ensure devices are updated and configurated Ensures a sound spare part warehouse Maintains good housekeeping Ensures availability of spare parts Manages contractors on site Ensures all employees understand and follow company policies and procedures Leading the Team Ensures team works together as efficiently as possible Assesses training needs of staff and ensures execution of training Provides an active personal development culture for all employees in the plant Ensures staff are brought in to cover absenteeism and holidays Correctly records time and attendance of team Performs annual performance evaluation What Makes You Great Education/Experience: Four-year degree in electrical engineering or equivalent experience Minimum four years of work experience at ALPLA or similar industry Experience with Computer Control Systems on machines Experience in working with hydraulic and pneumatic systems Hands on experience running busy engineering department At least 3 years of supervisory experience Qualification/Skills: Good organizational skills Good leadership skills Thorough understanding of technical aspects of different types of equipment ALPLA is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: ALPLA is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at ALPLA are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. ALPLA will not tolerate discrimination or harassment based on any of these characteristics. Immigration sponsorship is not eligible for this role

Aegis Worldwide is seeking an experienced Maintenance Manager to lead and optimize industrial maintenance operations within a manufacturing environment. This hands-on leadership role is ideal for a maintenance professional with deep expertise in preventive maintenance, facility management, equipment reliability, and mechanical and electrical systems. The Maintenance Manager will oversee daily maintenance activities, lead a team of skilled technicians, and drive continuous improvement initiatives to ensure maximum equipment uptime, facility efficiency, and operational safety. Key Responsibilities Lead and manage daily industrial maintenance operations for production equipment and facility systems, including Fresh Pack equipment, overhead doors, lighting, plumbing, and HVAC systems. Supervise, mentor, and provide technical leadership to maintenance supervisors, shift teams, and support staff. Develop, execute, and continuously improve preventive and predictive maintenance programs using CMMS systems. Oversee maintenance budgets, spare parts inventory, and cost-control initiatives. Troubleshoot and optimize mechanical, electrical, hydraulic, and pneumatic systems to minimize downtime. Plan and execute capital projects, equipment upgrades, and facility improvements. Track, analyze, and report equipment downtime, maintenance costs, and long-term maintenance forecasts. Ensure compliance with OSHA, safety, and regulatory standards. Qualifications Certifications in Electrical, Boilers, Hydraulics, Welding, OSHA, or Wastewater Treatment are highly preferred. 10+ years of experience in industrial maintenance, facilities management, preventive maintenance, or project leadership within a manufacturing environment. Strong proficiency with Microsoft Office, AutoCAD, and CMMS software. Hands-on expertise in mechanical, electrical, hydraulic, and pneumatic systems. Proven ability to lead teams, manage priorities, and drive operational improvements. Excellent leadership, problem-solving, and communication skills.

The Manufacturing Maintenance Manager is responsible for ensuring the reliability, safety, and efficiency of all facility systems within a fast-paced, multi-phase supply chain logistics operation. This role oversees maintenance activities for manufacturing equipment for food and beverage, material handling equipment (MHE), conveyance systems, electrical systems, HVAC, and general facility infrastructure. The Maintenance Manager leads a team of technicians to maintain uninterrupted distribution center operations through preventive maintenance, rapid response to equipment failures, and continuous improvement initiatives. Strong knowledge of various types of food and beverage industry equipment, conveyance equipment along with strong experience in coaching, mentoring, training, safety compliance, for direct reports and cross-functional collaboration is highly valued. Location: On-site, Kennesaw, GA Schedule: 1st Shift with the ability to work outside of normal business hours for any emergencies based on business needs Travel: Less than 10% domestic travel Compensation: $92,000-$125,000 annually, based on experience, skills, and education. Includes comprehensive benefits: medical, dental, vision, 401(k) with company match, generous PTO, sick time, and company holidays Key Responsibilities Oversee all maintenance activities to ensure timely and effective repairs and improvements. Supervise and develop hourly maintenance associates. Prioritize, schedule, and monitor daily maintenance tasks. Ensure facility systems meet reliability standards and comply with regulatory requirements. Develop training programs for maintenance staff. Coordinate planned outages and facility projects. Inspect and repair mechanical, electrical and power systems for safety and functionality. Maintain accurate records of service cycles and maintenance activities within CMMS systems. Manage inventory of spare/replacement parts and associated documentation. Perform various facility building maintenance repairs as needed. Enforce compliance with OSHA regulations, GMP standards, and corporate safety policies. Promote a culture of safety and continuous improvement. Hands-on repair of various equipment within the facility. Participate in projects for installation and modification of new and existing equipment. Minimum Qualifications High School Diploma or GED, or equivalent experience plus education. 5+ years' experience in preventive maintenance and troubleshooting of electrical, mechanical, pneumatic, hydraulic, and robotic packaging machinery within a co-packing, or warehouse facility. Leadership experience directly managing a team of direct reports. Experience in fast-paced, multi-phase production or distribution environments. Skilled in electrical testing and repairing various equipment including systems (vertical form and fill, case packing equipment, forklifts etc.) 24VDC to 480VAC 3-phase. Strong mechanical troubleshooting skills; ability to read schematics and equipment drawings. Proficient with power tools, hand tools, and testing equipment; able to operate forklifts, lifts, and other material handling devices. Excellent communication, time management, and attention to detail skills. Ability to work safely, maintain cooperative relationships, and perform physical tasks (standing, bending, reaching) for extended periods. Ability to work at heights of up to 50 feet on various types of equipment. Ability to lift up to 50 pounds. Preferred Qualifications Certifications in HVAC, plumbing, or electrical. Forklift certification. Knowledge of conveyance systems and vendor management. Familiarity with OSHA compliance and safety programs.

We are seeking a Maintenance Manager for a well-established food and beverage distribution facility. This first shift role offers a salary range of $90,000-$120,000 and is perfect for a leader focused on team development, enhancing preventive maintenance programs, and minimizing reactive firefighting. Absolutely must have strong management experience in the food and beverage packing industry. Key Role Overview: - First shift position - Long-term expectation to spend no more than 25% of time on the production floor once the team is fully trained - Focus on leadership, planning, reporting, CMMS management, and continuous improvement - Initial hands-on involvement as needed, transitioning to training the team for routine issues - Strong emphasis on preventive maintenance maturity and CMMS utilization Facility Details: - 182,000 sq. ft. operational since 2016 - Stable operation with a brother/sister site in Joliet - Previous Maintenance Manager promoted internally to another location The Manufacturing Maintenance Manager is responsible for ensuring the reliability, safety, and efficiency of all facility systems within a fast-paced, multi-phase supply chain logistics operation. This role oversees maintenance activities for manufacturing equipment for food and beverage, material handling equipment (MHE), conveyance systems, electrical systems, HVAC, and general facility infrastructure. The Maintenance Manager leads a team of technicians to maintain uninterrupted distribution center operations through preventive maintenance, rapid response to equipment failures, and continuous improvement initiatives. Strong knowledge of various types of food and beverage industry equipment, conveyance equipment along with strong experience in coaching, mentoring, training, safety compliance, for direct reports and cross-functional collaboration is highly valued. Required Candidate Background: - Proven experience as a Maintenance Manager in food and beverage manufacturing or co-packing - Experience with facilities producing consumable goods for grocery or retail channels - Hands-on foundation with packaging equipment, including vertical form fill, horizontal flow wrap, case erecting, stretch wrapping, and automated case packing - Experience leading multi-shift maintenance teams in fast-paced environments - Strong CMMS experience, particularly in preventive maintenance planning and documentation - Solid electrical and mechanical troubleshooting skills in regulated food environments - Familiarity with OSHA, GMP, and audit-driven environments

Our Mission Our mission is BIG. Our transformation is key-bringing the right businesses together to lead the energy transition. Our team is ready. What Impact You'll Make As the leader of the Maintenance team, you will be an active contributor to the success of the New Jersey facility by spearheading the implementation of the TPM pillars and driving overall maintenance excellence through a robust Work Management Process. What You'll Do Lead a team of electro-mechanical technicians supporting a 24/5 manufacturing operation Align the maintenance organization to prioritize Safety, Quality, Delivery, and Cost, in that order Establish a performance-oriented work environment encompassing standard performance appraisals, timely feedback, and disciplinary action when required Create a culture of continuous improvement through the implementation of industry best practices, lean manufacturing principles, and skills development for the technician team Develop and implement a robust Work Management Process to ensure timely and effective execution of preventive and restorative maintenance work Implement best practice KPIs to understand performance and identify areas of opportunity Collaborate cross-functionally by working with Engineering, Manufacturing, and Quality to support problem solving and drive resolution to complex issues Maintain integrity of the Maintenance Management System data and records Coordinate and oversee maintenance work performed by contract partners What You'll Bring Basic Qualifications Bachelor's degree from an accredited university or college or a high school diploma/GED with at least 5 years of experience in a maintenance/manufacturing leadership position Minimum of 3 additional years of experience in plant operations (preferencing maintenance experience) Computer literate with the ability to learn various inventory control systems, SAP, and Microsoft Office products such as Excel and PowerPoint Strong knowledge of engineering concepts and maintenance repair methods Ability to interpret blueprints, specifications, drawings, and schematics Experience with Maintenance Management Systems Project Management skills and experience Eligibility Requirements This role requires use of technical data subject to U.S. Government export restrictions and this posting is only for U.S. Persons (U.S. Citizens, lawful permanent residents and protected individuals (e.g., certain refugees and asylees)). Proof of status will be required prior to employment. What Will Make You Stand Out You have implemented and supported the Total Productive Maintenance (TPM) framework across operations to drive equipment reliability and operational efficiency You understand mechanical, electrical, electronic, and electro-mechanical principles and components You have demonstrated the ability to work in a fast-paced environment managing multiple, complex operational areas You have experience in chemical manufacturing operations and/or CNC machining facilities You are someone who is detail oriented with good organizational skills Demonstrated ability to communicate clearly and effectively across diverse audiences, both in writing and verbally MAU Workforce Solutions is an innovative global company with extensive experience providing solutions for success in staffing, recruiting, technology and outsourcing to our clients, employees, and applicants. Headquartered in Augusta, GA since 1973, MAU is a family and minority-owned company offering better processes and better people to create efficiencies and greater profits for our clients. Our relationships with world-class companies, our training programs and our culture of family allow MAU to offer better results, better jobs, and better lives to those who work with us. All Applicants must submit to background check and drug screening Disclaimer: This job description is not designed to be a complete list of all duties and responsibilities required of the position EOE

Seeking an experienced Maintenance Supervisor to lead and coordinate a team of maintenance technicians and external resources responsible for proactive and reactive maintenance, repairs, and support of manufacturing equipment, facilities, utilities, and site infrastructure. The role focuses on ensuring operational reliability, safety, and efficiency across the organization. Key Responsibilities: Demonstrate a strong commitment to safety and use it to guide daily decisions and actions. Oversee plant technical operations, including production equipment, facilities, utilities, and grounds. Develop and manage maintenance systems, processes, and standards for equipment, spare parts, preventive maintenance programs, and work orders. Lead preventative maintenance initiatives, assign work, track performance, and drive continuous improvement. Coordinate response efforts for unplanned downtime, ensuring timely resolution through internal teams and external resources. Collaborate with production and operations teams to schedule maintenance without disrupting workflow. Maintain accurate maintenance records, spare parts inventory, and CMMS documentation. Execute equipment calibrations and coordinate external technical support as needed. Analyze maintenance effectiveness and identify opportunities for process and efficiency improvements. Ensure compliance with safety, quality, environmental, and maintenance standards. Maintain organization, cleanliness, and adherence to GMP/5S standards in work areas. Manage maintenance budgets and cost reporting. Provide coaching, development, and support to maintenance staff to enhance skills and reliability. Act as point of contact for facility, utility, and equipment support during non-production hours. Perform hands-on maintenance tasks as necessary and lead by example. Other duties as required to support plant operations and continuous improvement. Qualifications: Minimum of 5 years' experience in equipment installation, maintenance, and repair. 3-5 years' experience supervising and leading technical teams in a manufacturing environment. Associate degree in machine maintenance, engineering technology, or equivalent experience. Strong knowledge of mechanical, electrical, and electronic equipment maintenance. Proven ability to develop and implement maintenance processes, preventive maintenance programs, and KPI tracking. Experience using CMMS or similar maintenance management systems. Strong problem-solving, organizational, and communication skills. Ability to work independently, lead a team, and drive continuous improvement initiatives. Preferred Qualifications: Experience in a food or process manufacturing environment. Knowledge of PLCs, VFDs, HMIs, and other electronic controls. Welding, equipment modification, and sanitary equipment maintenance experience. Exposure to world-class reliability or continuous improvement programs. Physical Requirements: Ability to perform physical tasks such as climbing, bending, stooping, reaching, and lifting up to 50 lbs. Comfortable standing for extended periods and working in industrial environments. Work Environment: Typical manufacturing environment with exposure to machinery, equipment, and production processes. Reasonable accommodations may be made for individuals with disabilities.

Maintenance Manager - Fabrication Katy, TX Area - 100% On-Site Direct Hire with Benefits The Maintenance Mechanical Manager will be responsible for ensuring the smooth functioning of our fabrication equipment, machinery, facilities, buildings, and facility grounds, as well as managing a team of maintenance staff. This is a leadership role that requires strong supervisory skills and a deep understanding of mechanical, welding, and manufacturing maintenance. Essential Responsibilities: Oversee maintenance on welding and manufacturing equipment as needed Experience in repair and troubleshooting and repair of Sub-Arc Welding Machines and Plasma Cutting Table Coordinate system repairs and monitor system performance Oversees the coordination of facilities maintenance and upkeep and supervise team of maintenance technicians Ensure company compliance with all safety and security protocols Conducts daily rounds to ensure staff is completing assigned tasks, inspection of equipment/machines/plasma cutting tables, buildings and grounds, and identifies problems for correction or repair Initiates and maintains an inspection program of devices and tools such as chains, straps, ladders, scaffolds, grinders, etc. Maintains up-to-date and accurate logs of preventive maintenance and inspections completed Removes defective tools or machinery from service and initiates lock out tag out procedures when appropriate Reports assets identified for disposal to management Oversees cleaning and maintenance of facility Maintains control of the assigned budget and uses good judgement in the expense of company funds Participates in training for self and ensure staff receive proper training to accomplish tasks and maintain a safe working environment Maintains compliance with all company policies and procedures and regulatory requirements Troubleshoot electrical, mechanical, and HVAC systems as needed Develop and manage the facilities budget, including forecasting expenses and identifying cost-saving opportunities Other duties as assigned Skills and Qualifications Welding and/or other manufacturing equipment knowledge highly desired and preferred Experience in repair and troubleshooting and repair of Sub-Arc Welding Machines and Plasma Cutting Table High school diploma or equivalent Minimum of 5 years' Maintenance Manager experience in a Fabrication environment Ability to understand and follow basic instructions Solid knowledge of normal operating states of plumbing, heating, air conditioning, electrical systems, and building fixtures Knowledge of and ability to operate, diagnose and repair a wide variety of manufacturing equipment including, but not limited to, cranes, welding machines, forklifts, brake press, rollers, compressors, hydraulics, pneumatics, gas, and diesel fired engines, etc. Demonstrate attention to detail, deadline-oriented, effective time management, problem solving, effective communication and a manufacturing background. Benefits 2 Weeks PTO BCBSTX (Company will pay for Individual) 401k Experience: Maintenance Manager: 5 years (Required) Fabrication: 5 years (Required) Electrical troubleshooting: 5 years (Required) Mechanical troubleshooting: 5 years (Required)

Maintenance Supervisor (Hands-On) We are seeking a Hands-On Maintenance Supervisor to lead and support a maintenance team in a fast-paced manufacturing environment. This role is ideal for a working supervisor who enjoys being on the floor, troubleshooting equipment, and leading by example. This position is approximately 60-75% hands-on, with the remaining time focused on supervising technicians, managing preventive maintenance, and ensuring work is completed safely and efficiently. The work is 70% mechanical and 30% electrical. What You'll Do Lead and support a team of maintenance technicians in a production environment Perform hands-on troubleshooting, repair, and maintenance of mechanical and electrical equipment Install, maintain, and repair systems including pneumatics, hydraulics, conveyors, pumps, and motors Develop and manage preventive maintenance schedules to minimize downtime Ensure production lines operate efficiently across multiple nearby facilities Assign and prioritize daily maintenance work and oversee projects through completion Establish and enforce safety procedures, including LOTO Use CMMS software to track work orders, PMs, and parts Maintain spare parts inventory and coordinate purchasing of equipment and materials Work with vendors for specialized repairs and facility services when needed Support equipment improvement and capital planning initiatives What We're Looking For 3-5+ years of industrial mechanical and electrical maintenance experience At least 1 year of supervisory or lead experience in maintenance Strong mechanical troubleshooting skills Electrical troubleshooting experience up to 480V; basic PLC knowledge Experience with pneumatics, hydraulics, conveyors, pumps, and motors Familiarity with industrial manufacturing equipment Basic computer skills for CMMS and maintenance documentation Proven reliability and job stability Preferred Qualifications CMMS experience (MaintainX preferred) Bilingual Spanish (a plus) Experience with cutting equipment, welders, robots, coating/painting, or packaging machinery Technical certifications or vocational training Background in industrial or manufacturing environments Schedule & Work Environment M-F , regular hours, Compensation & Benefits Salary: $85,000 - $105,000 Performance Bonus: 5-10% of base salary 401(k) Paid Time Off Medical, Dental, and Vision Insurance Education No degree required Technical certifications or trade education are a plus

Job Title:- Maintenance Supervisor (May go Longer) • Daily Schedule/Shift Monday-Friday. Will work Saturdays some weeks. • Candidate needs to be able to work any shift 1st, 2nd or 3rd Shift. It is common for them to work 12 hours a day, seven days a week is common. • If the candidate prioritizes weekends for spending time with family or leisure activities, this position is not for them. • 9-hour shift hours. Team works a lot of OT hours!!! Could work up to 12 hours a day. • Work two Saturdays and possibly Sundays on and one off. 1st shift: 5:15am-2pm 2nd shift: 1:15pm-10pm 3rd shift: 10pm-6:00am Monday-Friday Job Responsibilities: The Maintenance Group Leader will be responsible for leading a group of Skilled employees to troubleshoot and repair complex equipment and processes. This role requires you to consistently administer National and Local Agreement between company and the United Auto Workers Union. The work is of a technical nature and requires you to use independent judgment within the limits of Global Manufacturing Systems, focusing on Safety, People, Quality, Responsiveness, Cost, and Environment (SPQRCE). Selected candidates will have the opportunity to learn new skills as well as influencing the development of manufacturing processes to support this historical and game-changing progression to electric and autonomous vehicles. What You'll Do (Responsibilities): • Read and react to the manufacturing daily plan in the moment • Manage multiple tasks in a fast-paced environment with competing priorities • Possess the experience to manage change and navigate ambiguity • Drive accountability through people and processes which may require difficult conversations in a unionized environment • Demonstrate a high level of interpersonal skills and work effectively with all levels of the organization • Demonstrate a high analytical ability to solve complex problems • Conduct appropriate checks and tests, and communicate evaluation of results • Recommends solutions to problems • Responsible for preventative maintenance and diagnosis of equipment malfunctions • Meets schedule and quality requirements • Complies with the terms of local and national labor agreements • Implements divisional and corporate policies and safety and good housekeeping practices • Maintain frequent contact and collaboration with others outside of the work group • Responsible for the effective use of personnel, material and equipment • Establishes a course of action to accomplish completion of the job and/or project • Has knowledge and ability to implement principles Additional Description Your Skills and Abilities (Required Qualifications): • One year of direct team supervisory experience or at least 5 months as an internal per diem group leader • Experience reading and understanding electrical, pneumatic, and hydraulic blueprints • Experience coordinating, managing, addressing performance concerns, and leading people in a fast-paced environment • Experience solving complex problems and working in a fast-paced environment • Strong interpersonal skills, experience managing conflict and making decisions in an ambiguous, fast-paced environment • Basic computer proficiency (i.e. Microsoft Word, typing, email etc.) • Must be willing to work weekends and rotating shifts What Can Give You a Competitive Edge (Preferred Qualifications): • Strong critical thinking and analytical skills • Experience working on multiple projects simultaneously • Willingness to ask questions, take initiative and be resourceful • Excellent written and verbal communication skills • High level of integrity, ability to deal with ambiguity, self-directed • Experience working cross-functionally with Engineering and Manufacturing Teams This job is not eligible for relocation benefits. Any relocation costs would be the responsibility of the selected candidate. • What is the highest level of education required? High School diploma. Skilled trades background is helpful • What are the years of experience required? 3 years in a manufacturing is the minimum. Skilled trades background, understanding the team and process Candidate who has worked in the Union is a plus

Aegis Worldwide Maintenance Supervisor 1st Shift/$70k-$80k/ Full Time Hartford City, IN Aegis Worldwide is currently partnered with a company that manufactures recycled containerboard - for the corrugated box industry. Responsibilities Supervise mechanical and electrical maintenance teams, ensuring safe work practices, policy compliance, proper LOTO procedures, and timely completion of all assigned tasks. Oversee maintenance activities including mechanical, electrical, plumbing, and special systems work; inspect completed work for adherence to specifications and standards. Support work order planning by assisting with prioritization, scheduling, and personnel assignment; participate in RCA investigations and continuous improvement initiatives. Manage inventory control for shop tools and consumables, ensure safety equipment inspections are completed, and maintain housekeeping in all high-traffic and limited-access areas. Participate in after-hours maintenance rotation and ensure full compliance with confined space procedures and internal maintenance processes. Requirements Experience in a continuous manufacturing environment with strong focus on safety, quality, and equipment uptime. Proficiency with CMMS platforms (Maximo preferred) and ability to read schematics and operate electrical test equipment (meters, meggers, analyzers, phase meters). Hands-on experience with PLCs, DCS systems, electrical power systems, instrumentation, and troubleshooting plant equipment. Strong mechanical aptitude with working knowledge of hydraulics, pneumatics, conveyors, cylinders, belts, pulleys, bearings, and gearboxes. Understanding of standard mechanical practices, materials, tools, and equipment used for maintaining rotating and fixed systems.

Schedule: Full-Time Primarily 2nd Shift (3 PM 11:30 PM) Pay: Competitive Excellent team environment Growth potential About the Role Seeking a skilled Maintenance Technician with strong mechanical and electrical abilities to support a busy production facility. This position focuses on maintaining equipment reliability, reducing downtime, and ensuring safe, efficient operations. Responsibilities Perform maintenance and repairs on industrial machinery and equipment Troubleshoot mechanical and electrical issues to minimize downtime Conduct preventative maintenance and routine inspections Ensure all systems operate safely and efficiently Requirements Minimum of 2 years of industrial maintenance experience Comfortable working 2nd shift (3 PM 11:30 PM) Flexible with shift changes based on production needs Dependable, proactive, and able to work independently Highlights Competitive pay Full-time hours with growth opportunities Supportive and safety-focused work environment

Now Hiring in Hospitality: Event Staff, Housekeepers & Maintenance Technicians Immediate Openings! & experience ️ Event & Catering Staff (Part-Time, Flexible Scheduling) Pay: $10/hr during training $13.50/hr once fully trained Shifts: Vary by event (day or evening); typically 4 5 hours Responsibilities: Assist with catering and food service Set up and break down event spaces Refill drinks, bus tables & maintain guest areas Support smooth operations with a positive attitude Take initiative if trash is full, change it; if drinks are low, refill them Dress Code: All black, no logos Long hair tied back Closed-toe shoes Preferred Experience: Banquet, catering, or hospitality event work Housekeeping Day Shift (1st Shift, On Bus Route) Pay: $12/hr Schedule: Start at 9:00 AM, work until the job is complete (hours may become more consistent over time) Duties Include: Heavy lifting Loading/unloading Sweeping & mopping Trash removal Washing, drying & stocking supplies Great Fit For: Candidates who stay busy, work efficiently, and enjoy hands-on tasks General Maintenance Technician Day Shift (On Bus Route) Pay: $14 $15/hr based on experience Key Responsibilities: General facility maintenance & repairs Basic electrical and plumbing tasks Drywall installation/repair Painting & upkeep Troubleshooting issues independently Requirements: Prior maintenance experience Ability to work independently Reliable transportation Strong attention to detail Why Apply? Immediate openings Background-friendly employer (case-by-case) Bus route access for select positions Flexible part-time event shifts Stable day-shift options How to Apply Apply in person or contact us for more information: 304-948-6031