Production Technician jobs at MSR-FSR

JOB TITLE: Production Technician Lv II Production Technicians are responsible for inspecting, processing, cleaning, and testing parts and assemblies received from high-tech manufacturing customers. Technicians are required to complete training, understand, and follow written procedures and demonstrate ability to inspect, disassemble, clean/refurbish, reassemble, test and package customer parts and equipment in a critically controlled cleanroom work environment. DUTIES AND RESPONSIBILITIES: Strictly adhere to all site safety, quality, and company HR conduct policies and protocols. Read and follow written work instructions and procedures, assuring that each step is completed and annotated when finished. Use all required safety equipment including hearing protection, safety glasses or face shields, respirators, and chemical process PPE. Handle potentially hazardous materials according to appropriate manufacturing and safety procedures. Complete assigned tasks using a combination of cleaning techniques including use of hand and power tools, mechanical cleaning, and chemical cleaning equipment. Assist in maintaining processing equipment in good working condition. Perform and complete assigned tasks in a cleanroom work environment while adhering to required cleanroom garments and PPE and quality protocols. Support inventory management to ensure proper stocking levels are maintained. Ensure the work area, equipment and tools are clean and properly maintained. Requirements Operations Technician Job Requirements Ability to read English and follow technical procedures and instructions. Ability to pass required drug screening and background check Minimum of a high school diploma or GED This is a safety sensitive position; the ability to maintain the appropriate standards is required. Ability to work a compressed work week: FE shift - 6:00 am to 6:00 pm (Sun-Mon-Tue and Alternating Wed) plus OT BE shift - 6:00 am to 6:00 pm (Alternating Wed and Thu-Fri-Sat) plus OT COMPETENCIES: Adaptability - Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events. Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time. Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan. Diversity - Demonstrates knowledge of EEO policy; Shows respect and sensitivity for cultural differences; Educates others on the value of diversity; Promotes a harassment-free environment; Builds a diverse workforce. Ethics - Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values. Initiative - Volunteers readily; Undertakes self-development activities; Seeks increased responsibilities; Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed. Innovation - Displays original thinking and creativity; Meets challenges with resourcefulness; Generates suggestions for improving work; Develops innovative approaches and ideas; Presents ideas and information in a manner that gets others' attention. Interpersonal Skills - Focuses on solving conflict, not blaming; Maintains confidentiality; Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things. Motivation - Sets and achieves challenging goals; Demonstrates persistence and overcomes obstacles; Measures self against standard of excellence; Takes calculated risks to accomplish goals. Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings. Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics. Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments. Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly. Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly. Promotes a cooperative Safety Team environment culture of mutual support. Teamwork - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed. Technical Skills - Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others. Written Communication - Writes clearly and informatively; Edits work for spelling and grammar; Varies writing style to meet needs; Presents numerical data effectively; Able to read and interpret written information. PHYSICAL DEMANDS AND WORK ENVIRONMENT: Occasionally (less than 1/3 of the job) Frequently (1/3 to 2/3 of the job) Continually (more than 2/3 of the job) Continually required to stand. Frequently required to sit. Continually required to utilize hand and finger dexterity. Frequently required to work in confined spaces. Continually required to walk- up to 2 miles per day. Continually required to talk or hear. Continually required to perform repetitive tasks Occasionally required to climb, balance, bend, stoop, kneel or crawl. Occasionally required to taste or smell. Occasionally work near moving mechanical parts Occasionally work in high, precarious places. Continually work around fumes, airborne particles, or toxic chemicals. While performing the duties of this job, the noise level in the work environment is usually moderate. The employee must occasionally lift and /or move more than 50 pounds. Specific vision abilities required by this job include Close vision; Distance vision; Peripheral vision; Depth perception and ability to adjust focus. Must be able to wear personal protective equipment, including protective eye wear, hard hat, lab coat, gloves, steel-toed shoes, hearing protection, and respirators. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Benefits Health Care Plan (Medical, Dental & Vision) 401K Life Insurance Flexible Spending Accounts (FSA) Disability Insurance Paid Time Off Training & Development

We are seeking a Packaging Technician to join our team. This role requires a minimum of a High School Diploma, with an associate's degree preferred, and prior experience in the Life Science industry. The Packaging Technician will be responsible for labeling and packaging reference standard solutions and neat material aliquots to support cli catalog and custom-specific products. The position involves executing labeling and packaging projects, maintaining accurate batch records, and ensuring compliance with quality and safety policies. Interviews will be conducted in two stages: the first virtually and the second on-site. Key Responsibilities Label and package reference standard solutions and neat material aliquots Execute labeling, relabeling, and packaging projects as designed and documented Initiate forms or batch records for labeling and packaging projects Review batch records and forms to ensure completeness and accuracy prior to execution Complete budgets and ensure projects are finished on time Communicate delays and ensure customer requirements are met Perform work in compliance with Quality and Safety policies Maintain good housekeeping practices in the work area Required Qualifications High School Diploma or GED minimum Experience in the Life Science industry Ability to follow documented procedures and maintain accurate records Strong attention to detail and organizational skills Effective communication skills Preferred Qualifications Associate's degree Prior experience with packaging or labeling in a regulated environment

World Wide Technology is looking for a Data Center Technician. This role is part of WWT's Strategic Resourcing services and is a contract role. The candidate will be supporting a WWT customer and will be employed by one of WWT's preferred partners. The partner will provide full compensation and benefit information prior to employment with the partner. Job Description: Title: Data Center Technician Location: Roanoke, TX Available Shift:7 PM - 5 AM CST Wednesday, Thursday, Friday, Saturday Duration: 12 Months Contract Designation: Full Time Contingent - Contractors will be eligible for WWT's Full Time Employee Benefits Package including Medical, Vision, Dental, PTO, Paid Holidays, and more. Rate/Salary: $35/hr. Responsibilities: Infrastructure Management: Deploy, configure, and maintain server hardware, storage, and networking equipment in the data center. Perform routine hardware and software maintenance, upgrades, and patches. Monitoring and Troubleshooting: Monitor data center performance and respond to alerts promptly. Identify and troubleshoot hardware, network, and system issues to ensure optimal performance. Security and Compliance: Implement and enforce security measures to safeguard data center assets. Ensure compliance with industry standards and best practices. Documentation: Maintain accurate and up-to-date documentation of data center configurations, processes, and procedures. Qualifications: Proven experience in data center operations and infrastructure management. Strong knowledge of server hardware, storage systems, and networking protocols. Proficient in troubleshooting hardware and software issues. Familiarity with virtualization technologies. Understanding of security best practices and compliance standards. Excellent documentation and communication skills. Ability to work in a fast-paced and collaborative environment. World Wide Technology is looking for a Data Center Technician. This role is part of WWT's Strategic Resourcing services and is a contract role. The candidate will be supporting a WWT customer and will be employed by one of WWT's preferred partners. The partner will provide full compensation and benefit information prior to employment with the partner. Certain states and localities require employers to post a reasonable estimate of salary range. A reasonable estimate of the current pay range for this position is $30 to $35 hourly. Actual pay will be based on a variety of factors, including shift, location, experience, skill set, performance, licensure and certification, and business needs, and will be set by your employer. The range for this position in other geographic locations may differ. Certain positions may also be eligible for variable incentive compensation, such as bonuses or commissions, that is not included in base pay. If you have any questions or concerns about this posting, please email ****************** within 5 days of posting.

Data Center Technician (Breakfix). Qualifications: · Physical layer: fiber optic connections, contamination, cleaning · Understand ESD best practices · Comfortable with text based CLI · Familiar with IP based networking · A+/Network+ level of knowledge required · Good understanding of OSI layer and network principles · 2+ years of DC experience required · 4+ years of IT related experience required · Familiarity with the Linux based systems and experience with scripting and automation (Bash, Python, Perl) · Understanding BGP routing protocols, spanning tree, VRRP, LACP · Good organization, multitasking and communication skills · Microsoft Office Tools: Word, Outlook, Excel · Understanding of network procedures, environmental and safety management in a DC environment Responsibilities: · Physical hardware swaps: (Fabric and Backbone) o Optical transceiver swaps / Circuit diagnosis o Line card swap o TOR Replacement o Work with vendors for RMA's o Must be able to lift 50lbs · Asset Management · Tools and Ticket management · Build relationships with partner teams within the DC · Ability to review hardware logs, isolate and identify root cause · Remote link troubleshooting · Ability to mentor and guide L1 resource

(Direct Placement for Client) SIGMADESIGN has collaborated with a global company seeking an experienced Production Technician to join their facility in Gresham, OR. This company has been operating for over 50 years and is recognized as the world's leading lab diamond and super-materials producer. This is a full-time permanent opportunity that offers excellent benefits including 4 weeks PTO in addition to 40 hours of sick time, as well as structured career and professional development. What is offered Choice of excellent health plans Dental and vision plans 401k plan and safe harbor with company match up to 6% Generous vacation (4 weeks of PTO + 1 week of Sick Time) Salary: $21.64/hr starting pay with skills-based pay and cost-of-living increases Schedule: - 4/3 compressed schedule - 7:45 am to 8:15 pm. - Front Half: Sunday - Tuesday with alternating Wednesday. - Back Half: Thursday - Saturday with alternating Wednesday Primary Function: The successful candidate will join the Operations Group as part of a team tasked with operating CVD diamond and associated manufacturing equipment in Gresham, Oregon. This is a rare opportunity to be a key contributor in ramping a new process in a production facility. Essential Job Functions - Responsibilities: Perform machine set-up/operation, routine maintenance, and monitoring of tools and systems. Utilize diagnostic equipment to monitor equipment performance, diagnose root cause and make reliability improvement recommendations. Be responsible for first-level trouble-shooting, equipment recoveries and repairs that are commensurate with level of expertise, (training provided). Read production schedules, Bills of Materials, Operational Procedures. Maintain accurate records and be responsible for quality charting, prioritization, analyzing and interpreting data tracking, and running reports through an automated Manufacturing Execution System. Engage in continuous improvement efforts. Notify management of any conditions felt as being undesirable or nonconforming to safety, product specification or any procedures that cannot be performed as documented. Provide written and verbal summaries of process, and equipment issues encountered during operation. Other duties as assigned. Education and Experience: (Knowledge, skills, & abilities) Self-starter and desire to learn to make continuous improvements Detail orientated Interpersonal skills Steady hand Adaptability: Ability to work in fast moving work environment, comfortable with change Good written and verbal communication skills, Good PC skills, Ability to operate to a manufacturing standard. Comfortable working with other shifts and departments to help drive operational improvements Work Environment LAB: Standard lab/production environment. Appropriate safety garments (PPE) must be worn. Occasionally may be required to work in environmental conditions that emulate typical user environments in order to facilitate design testing and validation. Occasionally may be required to travel as required to other facilities, clients or suppliers. Must be able to stand and work as long as 12 hours in different positions. Must be able to lift up to 50 pounds unassisted. SigmaDesign is an Equal Opportunity Employer

PsiQuantum's mission is to build the first useful quantum computers-machines capable of delivering the breakthroughs the field has long promised. Since our founding in 2016, our singular focus has been to build and deploy million-qubit, fault-tolerant quantum systems. Quantum computers harness the laws of quantum mechanics to solve problems that even the most advanced supercomputers or AI systems will never reach. Their impact will span energy, pharmaceuticals, finance, agriculture, transportation, materials, and other foundational industries. Our architecture and approach is based on silicon photonics. By leveraging the advanced semiconductor manufacturing industry-including partners like GlobalFoundries-we use the same high-volume processes that already produce billions of chips for telecom and consumer electronics. Photonics offers natural advantages for scale: photons don't feel heat, are immune to electromagnetic interference, and integrate with existing cryogenic cooling and standard fiber-optic infrastructure. In 2024, PsiQuantum announced government-funded projects to support the build-out of our first utility-scale quantum computers in Brisbane, Australia, and Chicago, Illinois. These initiatives reflect a growing recognition that quantum computing will be strategically and economically defining-and that now is the time to scale. PsiQuantum also develops the algorithms and software needed to make these systems commercially valuable. Our application, software, and industry teams work directly with leading Fortune 500 companies-including Lockheed Martin, Mercedes-Benz, Boehringer Ingelheim, and Mitsubishi Chemical-to prepare quantum solutions for real-world impact. Quantum computing is not an extension of classical computing. It represents a fundamental shift-and a path to mastering challenges that cannot be solved any other way. The potential is enormous, and we have a clear path to make it real. Come join us. Job Summary: This position is an hourly position to support multiple manufacturing activities related to buuil and assembly of components and utilize machines in the process. Support build products by assembling parts and componenents according to engineering specifications. Would require work on a manufacturing line, receiving batches of smaller parts to integrate into a complete product. Perform some repair, alignment or calibration. Will train to operate cryogenic test systems aand room temperature. Support lab, cleanroom operations and maintenance activities additional duties as assigned Responsibilities: Perform material inventory as required. Able to work overtime and weekend as required. Support sub-assembly testing. Install sub-assembly into cryostat. Cleave and Splice Fiber Opticas Cables. Utilize hand tools and small parts such as screws, welds and press fits to assemble equipment and connect circuits between individual pieces. Update MES (manufacturing execution system) by generation transactions for all work completed. Create and submit a daily pass-down of all activities and results during shift. Communicate with others when help needed during the shift with manager, other operation team and/or engineering team. Ability to work independently with limited direction. Demonstrated ability to juggle multiple priorities. Demonstrated interest in PsiQ's mission and vision for quantum computing, with an ability to contribute in a start-up environment consistent with PsiQ's values of communication, collaboration, respect, results and challenge. Read and follow manufacturing sub assembly instructions. Experience/Qualifications: Experience in operating tooling. Requires minimum supervision. Able to inspect own work and perform quality assurance and inspect their own work and the work of their team. Able to follow instruction and provide recommendations and improvements. Maintain safe work environment. At least 2 years of related experience in a semiconductor, optical, or R&D test position. Strong attention to detail, ability to follow procedures, and take initiative to solve problems. High dexterity working with small components using precision tools and instruments. Proficiency with MS Office software and Windows/Windows applications. Physical agility and manual dexterity, specific knowledge of safe material handling (able to lift 50lbs). Willingness to "wear multiple hats", perform a wide range of different tasks, utilize various tools to support engineering R&D and operational efforts. Demonstrate excellent communication skills both verbal and written. High school diploma or 4 years equivalent experience. PsiQuantum provides equal employment opportunity for all applicants and employees. PsiQuantum does not unlawfully discriminate on the basis of race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, national origin, ancestry, citizenship, age, physical or mental disability, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, or any other basis protected by applicable laws. Note: PsiQuantum will only reach out to you using an official PsiQuantum email address and will never ask you for bank account information as part of the interview process. Please report any suspicious activity to *************************. We are not accepting unsolicited resumes from employment agencies. The ranges below reflect the target ranges for a new hire base salary. One is for the Bay Area (within 50 miles of HQ, Palo Alto), the second one (if applicable) is for elsewhere in the US (beyond 50 miles of HQ, Palo Alto). If there is only one range, it is for the specific location of where the position will be located. Actual compensation may vary outside of these ranges and is dependent on various factors including but not limited to a candidate's qualifications including relevant education and training, competencies, experience, geographic location, and business needs. Base pay is only one part of the total compensation package. Full time roles are eligible for equity and benefits. Base pay is subject to change and may be modified in the future. Bay Area Only Pay Range$27-$34 USD

Details: Additive Manufacturing Technician (Aerospace/Defense/Space) Pay: $38-$43/hour Our client is a leader in advanced metal additive manufacturing (AM) supporting aerospace, defense (ultra-secure), and space programs. They build and certify production flight hardware and are part of a next-generation ecosystem pushing the boundaries of AM technology. If you want to work hands-on with industry-leading EOS and SLM systems, support flight-critical production, and grow in a high-tech manufacturing environment, this role is a strong fit. Operate and maintain advanced metal AM machines (EOS M290/M4K, SLM 280, NXG, SLM500). Perform machine setup, calibration, and daily maintenance to ensure reliable builds. Handle metal powders safely-including sieving, sampling, loading, and cleanup-while maintaining full material traceability. Remove supports, self-inspect parts, and verify dimensional accuracy using calipers, micrometers, dial indicators, and other precision tools. Monitor builds according to a flexible machine schedule. Document test procedures, track build data, and suggest process improvements. Collaborate with engineering and operations teams to solve problems and optimize repeatability. Maintain a clean, safe work environment with proper PPE (respirators, gloves, protective footwear, eye/ear protection). Contribute to continuous improvement initiatives and support operational excellence. Details: What You Need to Bring to the Table Preferred: 2+ years in additive manufacturing or a comparable advanced manufacturing environment. Required: Ability to work flexible hours aligned with machine build schedules. Required: U.S. Person (ITAR-compliant) and ability to obtain/maintain a security clearance. Experience using hand, power, and pneumatic tools. Familiarity with AM processes, raw materials, powder handling, and quality control standards. Strong understanding of AM equipment-especially EOS or SLM systems. Ability to read/interpret work instructions, follow detailed procedures, and maintain accurate documentation. High attention to detail with strong organizational and communication skills. Comfort with physical requirements: standing for extended periods, lifting up to 50 lbs, using digital interfaces, and occasionally climbing, kneeling, or crouching. Why This Role Matters You'll be directly supporting the production of flight-ready hardware for aerospace, defense, and space applications. This is a high-impact, hands-on role where you'll learn cutting-edge AM technologies and help shape the next generation of advanced manufacturing.

The focus of this position is production support to include process engineering, SMT operation and troubleshooting support, Selective Solder operation support and all aspects of data management and preventive maintenance defined therein. This role will apply skills specific to the technology ways and means utilized and employed during electronics manufacturing. Support for design feedback and new product introduction adaption are also included in this role. Sales and Production Process Engineering Support Provide process related input to the Infrastructure team or Sales help mitigate risk and set appropriate pricing levels (fixtures, tools, DFM feedback) Interact with prospective customers to convey process capabilities when required Coordinate Production support activities (programming, profiles, rework, etc) Production Support Identify, recommend, and implement equipment and/or software to promote achievement of Key Business Objectives Troubleshoot and coordinate repairs to key manufacturing equipment to minimize downtime Execute Product Level Process Design / Re-design Review new and existing products as necessary to define most appropriate/efficient manufacturing process Interact with Customers and Production to resolve assembly exceptions, provide manufacturing feedback, and implement Engineering Change Orders in a timely fashion within the scope of said role Collaborate with Quality Assurance to conduct defect root cause/failure analysis and pursue corrective action as required

Pay Rate: $19.33/Hour on W2. Our manufacturing company is seeking a team member to join our Hardware Manufacturing Team. In this role, you will align, calibrate, and execute test methods of varied complexity according to operational plans and customer demand. We are looking for associates who thrive in a team-oriented, goal-focused environment. We operate using Daily Management principles, providing immediate guidance and feedback to our associates and focusing on daily, monthly, and quarterly objectives. You will be responsible for following established operation procedures, maintaining appropriate training records for your role, sustaining a smooth flow of material, and the execution of work orders to on-time completion. Our work delivers both instruments and reagents to customers in hospital and laboratory environments, supporting patient health. Key Responsibilities Read, comprehend, and follow established work instructions and procedures with emphasis on quality. Execute the daily production plan to due date conformance and quality standards. Train to Standard Operating Procedures (SOPs). Follow engineering drawings, work order information, SOPs, and other written and verbal specifications in the manufacturing process while maintaining FDA requirements. Able to execute assembly tasks following standard operating procedures with supervision. Troubleshoot issues as they arise, escalating as necessary. Assure compliance with FDA Quality System Regulations (QSR), Good Manufacturing Practices (GMP), and ISO regulatory requirements. Work directly and cooperatively with cross-functional team members to troubleshoot issues and ensure emphasis on quality. Identify and recommend quality improvements including but not limited to production methods, equipment performance, product quality, and efficiencies. Learn and participate in the company's lean manufacturing principles. Maintain a safe and clean working environment by complying with procedures, rules, and regulations. Train new team members on equipment operations and work procedures as needed. Ability to complete appropriate paperwork, maintain accurate records of production, and report status of work. Physical Demands While performing the duties of this job, the associate is regularly required to stand for prolonged periods of time. The employee is frequently required to talk and hear;use hands to handle or feel;and reach with hands and arms above shoulder height and below the waist. The associate must be able to read and speak English. Using proper lifting techniques, the employee must be able to lift up to 30 lbs. Ability to maneuver assembly components by hand in a repetitive manner conducive to efficiency, job specifications, safety, and quality goals. Ability to frequently stand (80%), bend, kneel, lift, and sit to accomplish assembly production goals. Education/Experience High school degree (or equivalent degree). Must have 0-2 years'relevant experience. Experience in a regulated industry preferred (e.G., FDA, ISO). Additional Requirements MUST read, write, and speak fluent English. Proficiency with Microsoft applications.

Full Time, Non-Exempt Duties include building cable assemblies to manufactures drawings. Duties also include building interface component sub-assemblies and modifying and troubleshooting PCB assemblies. Duties/Responsibilities Soldering skills and crimping skills are a must with training in IPC soldering and IPC cable and wire harness assembly. Able to use computer system and required programs such as MS Office. Ability to learn ERP system for part research and to enter time. Required Qualifications Citizenship verification required due to Export Control compliance. A "US Person" is defined by 22 C.F.R. § 120.15 which includes US Citizens, lawful permanent residents, certain refugee or asylee designations. 5+ years of experience in building cable assemblies, reading technical documents and drawings. High School diploma or equivalent. Must be at least 18 years old Ability to lift 25-30 pounds. Preferred Qualifications Experience in troubleshooting and PCB assembly and modification IPC certification in Soldering and Cable and Wire Harness Assembly Equal Employment Opportunity X Technologies is committed to providing equal employment opportunities to all employees and applicants regardless of gender, pregnancy (including childbirth or related medical conditions), sexual orientation, gender identity, age, race, national origin, religion, color, veteran status, disability, genetic information, or any other category protected by federal, state, or local law. Equal opportunity extends to all aspects of the employment relationship, including hiring, transfers, promotions, training, separations, working conditions, compensation, benefits, and other terms and conditions of employment. All employees are responsible for creating and maintaining a work environment that is free of discrimination.

Job Description Manufacturing Technician II Full Time, Non-Exempt Duties include building cable assemblies to manufactures drawings. Duties also include building interface component sub-assemblies and modifying and troubleshooting PCB assemblies. Duties/Responsibilities Soldering skills and crimping skills are a must with training in IPC soldering and IPC cable and wire harness assembly. Able to use computer system and required programs such as MS Office. Ability to learn ERP system for part research and to enter time. Required Qualifications Citizenship verification required due to Export Control compliance. A "US Person" is defined by 22 C.F.R. § 120.15 which includes US Citizens, lawful permanent residents, certain refugee or asylee designations. 5+ years of experience in building cable assemblies, reading technical documents and drawings. High School diploma or equivalent. Must be at least 18 years old Ability to lift 25-30 pounds. Preferred Qualifications Experience in troubleshooting and PCB assembly and modification IPC certification in Soldering and Cable and Wire Harness Assembly Equal Employment Opportunity X Technologies is committed to providing equal employment opportunities to all employees and applicants regardless of gender, pregnancy (including childbirth or related medical conditions), sexual orientation, gender identity, age, race, national origin, religion, color, veteran status, disability, genetic information, or any other category protected by federal, state, or local law. Equal opportunity extends to all aspects of the employment relationship, including hiring, transfers, promotions, training, separations, working conditions, compensation, benefits, and other terms and conditions of employment. All employees are responsible for creating and maintaining a work environment that is free of discrimination.

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more - all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity! ADDITIVE MANUFACTURING TECHNICIAN II - 2ND SHIFT Based onsite at Rocket Lab's global headquarters in Long Beach, California the Additive Manufacturing Technician II is responsible for supporting various Additive technologies (LPBF, DED, Hybrid Solutions) with various alloys. This role will support all Additive processes involved with the Rutherford & Archimedes engines. You will support the Manager of Additive Manufacturing and Production Additive Manufacturing organization, with deliverables required for internal leadership, board of directors, and investors. This opening is for 2nd shift Monday - Friday from 1pm-9:30pm PST. WHAT YOU'LL GET TO DO: Uphold and follow all Additive safety measures - be an advocate for safe operations. Prepare additive print jobs for success through attention to detail on setups. Operate a variety of metal 3D printers, experience with EOS, SLM, & DMG preferred. Identify and troubleshoot mechanical, optical laser, electrical, and build issues. Conduct calibration of 3D Printers and interpret findings with Engineering. Ensure conformance of part/build through independent inspection and print detail verification. Follow work orders, procedures, specifications, and test instructions with attention to detail. Communicate any issues that are found. Perform daily, weekly, and monthly preventative maintenance - as directed by Engineering. Provide process improvement feedback and implement solutions in collaboration with Engineering. Collaborate with Engineers on setup and fabrication of 3D prints and new hardware. Kick off issue tickets based on process/product non-conformances. Drive Additive Internal 5S system with actions promoting sustainability in the Additive Department. Utilize measurement tools (micrometer, caliper, surface plate etc.) to ensure high quality inputs and outputs, including post-print inspection and post-processing inspection. YOU'LL BRING THESE QUALIFICATIONS: 2+ years of experience in a manufacturing, fabrication, assembly or testing environment. High School diploma or GED. Proficient in hand, power, and pneumatic tools such as drills, chisels, taps. Proficient in inspection methods: surface plate, calipers, micrometers, height gauge. Experience with operating machine tools: vertical mills, lathes, media blasters, cranes, or forklifts THESE QUALIFICATIONS WOULD BE NICE TO HAVE: 4+ years of experience with operating metal 3D printers and knowledge of associated hazards Experience with Additive Manufacturing (AM) principles. Proficient with Microsoft Office. Experience interpreting engineering drawings. Experience using JIRA. ADDITIONAL REQUIREMENTS: Ability to work the following shift, Monday-Friday 1pm-9:30pm PST. Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position Able to lift up to 25lbs. unassisted Must be able to climb ladders and be comfortable working in tight spaces. Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls. Must be able to walk or stand for extended periods - 8 hours min Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$25-$35 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at ***********************.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more - all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity! ADDITIVE MANUFACTURING TECHNICIAN II - 2ND SHIFT Based onsite at Rocket Lab's global headquarters in Long Beach, California the Additive Manufacturing Technician II is responsible for supporting various Additive technologies (LPBF, DED, Hybrid Solutions) with various alloys. This role will support all Additive processes involved with the Rutherford & Archimedes engines. You will support the Manager of Additive Manufacturing and Production Additive Manufacturing organization, with deliverables required for internal leadership, board of directors, and investors. This opening is for 2nd shift Monday - Friday from 1pm-9:30pm PST. WHAT YOU'LL GET TO DO: Uphold and follow all Additive safety measures - be an advocate for safe operations. Prepare additive print jobs for success through attention to detail on setups. Operate a variety of metal 3D printers, experience with EOS, SLM, & DMG preferred. Identify and troubleshoot mechanical, optical laser, electrical, and build issues. Conduct calibration of 3D Printers and interpret findings with Engineering. Ensure conformance of part/build through independent inspection and print detail verification. Follow work orders, procedures, specifications, and test instructions with attention to detail. Communicate any issues that are found. Perform daily, weekly, and monthly preventative maintenance - as directed by Engineering. Provide process improvement feedback and implement solutions in collaboration with Engineering. Collaborate with Engineers on setup and fabrication of 3D prints and new hardware. Kick off issue tickets based on process/product non-conformances. Drive Additive Internal 5S system with actions promoting sustainability in the Additive Department. Utilize measurement tools (micrometer, caliper, surface plate etc.) to ensure high quality inputs and outputs, including post-print inspection and post-processing inspection. YOU'LL BRING THESE QUALIFICATIONS: 2+ years of experience in a manufacturing, fabrication, assembly or testing environment. High School diploma or GED. Proficient in hand, power, and pneumatic tools such as drills, chisels, taps. Proficient in inspection methods: surface plate, calipers, micrometers, height gauge. Experience with operating machine tools: vertical mills, lathes, media blasters, cranes, or forklifts THESE QUALIFICATIONS WOULD BE NICE TO HAVE: 4+ years of experience with operating metal 3D printers and knowledge of associated hazards Experience with Additive Manufacturing (AM) principles. Proficient with Microsoft Office. Experience interpreting engineering drawings. Experience using JIRA. ADDITIONAL REQUIREMENTS: Ability to work the following shift, Monday-Friday 1pm-9:30pm PST. Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position Able to lift up to 25lbs. unassisted Must be able to climb ladders and be comfortable working in tight spaces. Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls. Must be able to walk or stand for extended periods - 8 hours min Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$25-$35 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at ***********************.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more - all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. MANUFACTURING Rocket Lab's Manufacturing team are the builders and the doers who work with our advanced machinery across our global manufacturing sites to get our satellites, satellite components, and rockets out the door. They bring the designs of our engineers to life by using advanced manufacturing techniques like 3D printing to create our hardware and are responsible for delivering our projects and missions on time and on budget to our customers. AVIONICS MANUFACTURING TECHNICIAN II Based onsite at Rocket Lab's global headquarters in Long Beach, California the Avionics Manufacturing Technician II is responsible for building and testing components and electrical assemblies of the Rutherford rocket engine - an electric propellant pump system. Avionics Manufacturing Technicians are responsible for a broad range of responsibilities including soldering, wire harnessing, PCB assembly, functional testing, operating thermal chambers, creative ideas, and offer continuous improvement recommendations. WHAT YOU'LL GET TO DO: Follow work instructions and offer recommendations for continuous improvement. Speak openly and elevate concerns / recommendations to Leading Hand. Think creatively, and question status quo. Actively contribute to local 5S work center. Identify and highlight abnormalities. Complete assigned special projects and scheduled jobs. YOU'LL BRING THESE QUALIFICATIONS: 2+ years of experience with electrical assemblies and components High School diploma or GED PCB assembly experience Soldering and/or harnessing of small electrical assemblies Use of common tools such as screwdrivers, pliers, spanners, soldering irons THESE QUALIFICATIONS WOULD BE NICE TO HAVE: Inspect PCB and wiring assemblies meet customer workmanship standards. Use of specialist tools and equipment; wire strippers, torque drivers, milliohmmeter, multimeter, DC power supply, etc. Experience testing components, sub-assemblies, and operating test equipment Operate thermal chambers, functional test equipment, and perform software driven tests. Knowledge of standard industry Electrostatic Discharge (ESD) policy Manufacture electronic components to NASA workmanship standards using either IPC-J-STD-001 or IPC-610 Manufacture electrical harnesses to IPC-620 standards. Experience assembling per manufacturing instructions and drawings. ADDITIONAL REQUIREMENTS Willing to work Monday - Thursday 5:00am - 3:30pm Must be able to walk and stand for long periods of time Must be comfortable working in a production environment with extensive use of hazardous chemicals such as acids, alkalis, and solvents Must be able to lift up to 25lbs. unassisted. Must be able to wear appropriate PPE for lab and electro-chemical manufacturing environment Must be comfortable with climbing up and down ladders, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, carrying, crawling, and maneuvering in tight spaces Must be willing to work extended hours and/or weekends as needed Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$25-$35 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at ***********************.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Working in a team of media process technicians, media process technician I will manufacture dehydrated and liquid cell culture media. Formulation technician will be able to follow batch record instructions and will be expected to weigh microgram to kilograms quantities of individual raw materials, calibrate equipment, follow safety policies and procedures, operate milling equipment, perform sterile filtration and any other tasks required to complete cell culture media manufacturing. Standard product testing, such as osmolality, pH and turbidity, will also be performed in this job. This position works closely with R&D, procurement, quality, process technology, marketing as well as external and internal customers and vendors RESPONSIBILITIES: Responsible for the staging and compounding of raw materials within weight tolerances (e.G. Micrograms to kilograms), milling, blending, aseptic liquid filling, process control monitoring and documentation of such procedures for manufacturing dehydrated culture media and liquid media in accordance with production schedules following the appropriate GMP and department procedures Completes all required documentation neatly, accurately, and in accordance with GMP. Performs cleaning, inspection, calibration and assists in the maintenance of equipment. Maintains related logs and records. Performs equipment troubleshooting. Handles raw materials per GMP and Safety requirements. Uses equipment such as pipettors, balances, osmometer, turbidimeter and pH meters. Ensure that tasks are performed in a safe and responsible manner to create an injury free and incident free workplace Required to follow through on assigned responsibilities and able to function under supervision. Responsible for promoting positive team environment through good communications and team engagement. May be required to work overtime. Performs other duties as assigned in support of business goals QUALIFICATION REQUIREMENTS: Minimum of High School Diploma or equivalent. Minimum of 6 months experience in a high-paced laboratory environment or manufacturing facility. Equivalent combination of education, training, and relevant work experience maybe considered. Must be able to read, write, and follow testing and inspection procedures. Must be able to maintain neat, accurate and complete records and logs. Mechanical aptitude and ability to disassemble and reassemble various equipment. Good communication skills and ability to work both individually and as part of a team. Flexibility with departmental work schedules including overtime. Must be able to focus with continuous attention to detail. Basic experience in weighing multiple components is required. Basic proficiency with PCs (Personal Computers) and use of Windows applications such as MS Excel, MS Word and MS PPT is required. Statistical analysis using mathematical spreadsheets such as Excel or Minitab is highly desired. Must be able to lift or move approximately 40lbs Employee Benefits: At LanceSoft, full time regular employees who work a minimum of 30 hours a week or more are entitled to the following benefits: Four options of medical Insurance Dental and Vision Insurance 401k Contributions Critical Illness Insurance Voluntary Permanent Life Insurance Accident Insurance Other Employee Perks About LanceSoft LanceSoft is rated as one of the largest staffing firms in the US by SIA. Our mission is to establish global cross-culture human connections that further the careers of our employees and strengthen the businesses of our clients. We are driven to use the power of our global network to connect businesses with the right people, and people with the right businesses without bias. We provide Global Workforce Solutions with a human touch.

Performs functions associated with all manufacturing operations, including working with engineers in set-up and calibration tasks, as well as performing rework and quality testing related to the production of parts, components, subassemblies, and final assemblies. Uses sophisticated programs to collect and evaluate operating data to conduct on-line adjustments to products, instruments, or equipment. Determines and may assist in developing methods and procedures to control or modify the manufacturing process. Works with engineers in conducting experiments. Top Daily Responsibilities: •Required to work hands-on the deposition of material using tools and work instructions. •Required to work hands-on the lab equipment and configure the modules to the requested customer configuration. •Create, revise, update all documents pertaining to the product. By ensuring accuracy with process, tooling, equipment, safety, etc. Daily Responsibilities: •A good understanding of Electronics/Electrical/Mechanical systems •Understand beginning to end process flow/knowledge •Ability to troubleshoot equipment or process errors •Ability to adjust equipment to achieve desired requirements •Perform necessary calculations and input precise data •Demonstrate high attention to detail •Works on assignments requiring considerable judgement and initiative •Understands implication of work and makes recommendations for solutions •Ability to work efficiently and effectively, utilizing time wisely •Ability to work under frequency changing priorities and deadlines •Ability to take daily notes on production process •Ability to work both autonomously and as part of a team •Plan work and execute plans in a safe, sensible, and timely manner •Periodically lifting of material is expected •Follow all company process and procedures •Require daily clean room protocol •Follow all company policies and procedures relating to quality management standards, such as ISO •Require meticulous and precise manual dexterity handling wafers Required Skills/Experience/Qualification •Associate degree or equivalent technical training •Accumulated 5 or more years of manufacturing-related experience preferred •Ability to read and follow assembly documents in their entirely •Strong communication skills (verbal and written) •Familiarity with hand and machine tools •Excellent troubleshooting skills •Ability to lift +/- 25 lbs. (using the necessary equipment if needed) •Knowledge of ESD practices •Knowledge of Microsoft software (word, excel) •100% on site •Clean room required

External Conduct comprehensive vehicle-level functional testing of autonomous vehicles throughout all End-of-Line (EOL) processes. Engage in practical and professional communication with cross-functional teams. Comply with established processes and procedures. Provide regular updates on testing progress to leads and management personnel. Escalate any issues that impede testing procedures. Collaborate closely with engineers and fellow technicians on vehicle testing initiatives. Execute daily tasks to ensure project timelines are adhered to. Offer constructive feedback to team members to facilitate future development efforts. Maintain a clean and organized vehicles, equipment, and the build area, ensuring all Environmental Health and Safety guidelines are adhered to. Allocate approximately 50% of work time to driving vehicles under autonomous control. Identify opportunities for enhancement in Quality, Efficiency, and Safety standards. Demonstrate flexibility and a proactive approach in supporting evolving processes and assuming new responsibilities. Assist with paperwork and documentation related to vehicle readiness. Internal Assist with vehicle transportation and movement logistics. Troubleshooting issues consistently and generating accurate mission and ZPT reports. Communicating clearly and effectively in designated Slack channels, both verbally and in writing. Proactively reporting any issues encountered. Demonstrating a strong drive to learn new technologies, processes, and methodologies. Effectively multitasking and managing the complete mission lifecycle for multiple vehicles simultaneously. Being open to cross-training, supporting various processes, and assisting other teams and tasks. Following up on outstanding ZPTs and providing summaries or feedback. Possessing a thorough understanding of vehicle behavior, software, and firmware to independently perform diagnostics and root cause analysis with minimal Engineering support, while collaborating with engineers and cross-functional teams. Contributing to creating Manufacturing AST work instructions through close collaboration with Engineers and teammates. Demonstrating proficiency in navigating and utilizing various Manufacturing systems and tools such as TestRail, GitHub, Looker, CANalyzer, Vehicle Testers, MFG PSS, and Twilio. Performing vehicle bring-up procedures and executing necessary software/firmware updates to support Engineering and General Assembly. Working with new vehicle platforms (e.G, L3 and VH6) entails more critical and complex responsibilities, often requiring ASTs to be the first to troubleshoot new issues and validate fixes due to the initial absence of Work Instructions, prior to broader fleet deployment. Qualifications: Bachelor's degree with 4-6 years of experience in the autonomous vehicle industry. or High School Degree/GED with 8-10 years of experience Strong understanding of both mechanical and electrical systems. Proficient in interpreting technical documents, schematics, and diagrams. Skilled in using diagnostic tools and test equipment. Technical aptitude in firmware, software, and hardware. Excellent communication and problem-solving abilities. Positive attitude with a willingness to learn new tasks. Excellent driving history with a priority on safety. Preferred: Technical certification Experience in an R&D or manufacturing environment Familiarity with autonomous systems or advanced driver assistance systems (ADAS) Exposure to GitHub, TestRail, and other software tracking tools Work Environment: This role is situated within manufacturing and testing environments. Flexibility is essential due to potential periods of downtime and the need to support other teams to meet production and testing schedules. Adhere to all manufacturing safety policies. Physical Requirements: Ability to lift up to 25 lbs Standing, walking, and working in a manufacturing or shop environment for extended period

In business since 2000, LanceSoft is a nationally certified Minority Business Enterprise (MBE) that has established itself as a pioneer in providing highly scalable, cost-effective workforce solutions to a diverse set of customers across various industries in the United States. Headquartered in Virginia, LanceSoft currently operates out of several locations in the US and Canada. Job Description Responsible for all aspects of prepping and loading UPS battery cabinets units including enforcing and maintaining all safety and environmental requirements for the area. • Build battery cabinet systems and install batteries in UPS cabinets including LP and SG series • Use vacuum manipulator • Inventory Control: open/close work orders, pull units from inventory, manage inventory locations and serial number database • Ability to use the following tools: drill motor, power screw driver, digital volt meter, Hypot, Power Supply AC/DC., lift table, insulated tools, torque driver and battery handling devices. Qualifications • Education: High School Diploma or GED • Experience: 6 months to 1 year experience in mechanical assembly • Ability to perform repeated 35 pounds lifts throughout the day • Ability to read and comprehend engineering drawings • Ability to work within a high voltage electrical environment Additional Information Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, gender Identity, sexual orientation, national origin, age, disability, veteran status, pregnancy, or other status protected by law. We wish to thank all applicants for their interest and effort in applying for this position, however, only candidates selected for interviews will be contacted. No unsolicited agency referrals please.

In business since 2000, LanceSoft is a nationally certified Minority Business Enterprise (MBE) that has established itself as a pioneer in providing highly scalable, cost-effective workforce solutions to a diverse set of customers across various industries in the United States. Headquartered in Virginia, LanceSoft currently operates out of several locations in the US and Canada. Job Description Responsible for all aspects of prepping and loading UPS battery cabinets units including enforcing and maintaining all safety and environmental requirements for the area. • Build battery cabinet systems and install batteries in UPS cabinets including LP and SG series • Use vacuum manipulator • Inventory Control: open/close work orders, pull units from inventory, manage inventory locations and serial number database • Ability to use the following tools: drill motor, power screw driver, digital volt meter, Hypot, Power Supply AC/DC., lift table, insulated tools, torque driver and battery handling devices. Qualifications • Education: High School Diploma or GED • Experience: 6 months to 1 year experience in mechanical assembly • Ability to perform repeated 35 pounds lifts throughout the day • Ability to read and comprehend engineering drawings • Ability to work within a high voltage electrical environment Additional Information Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, gender Identity, sexual orientation, national origin, age, disability, veteran status, pregnancy, or other status protected by law. We wish to thank all applicants for their interest and effort in applying for this position, however, only candidates selected for interviews will be contacted. No unsolicited agency referrals please.