Computer Numerical Controller Machinist jobs at Oil States International - 78 jobs

PRIMARY DUTIES & RESPONSIBILITIES Operate under minimal supervision to produce high-quality parts using various machines, including but not limited to CNC lathes and milling machines Perform setup, operation, and inspection of parts to ensure conformance to specifications, maintaining close tolerances and optimal efficiency Study and interpret engineering drawings, manuals, specifications, and sample parts to determine dimensions, tolerances, sequence of operations, and setup requirements Measure and mark dimensions and reference points on materials or workpieces to guide machining operations Detect equipment malfunctions or out-of-tolerance conditions and make necessary machine adjustments within capability to maintain quality standards; promptly report malfunctions to supervision Assist in solving complex manufacturing challenges and participate in cost reduction and continuous improvement projects Safely operate forklifts and other lifting devices to move parts and materials as required Communicate effectively with supervisors, engineers, production control, quality assurance, and other personnel to coordinate assignments and resolve machining or quality issues Maintain equipment and work area cleanliness; perform routine preventive maintenance Ensure compliance with all company health, safety, and environmental regulations Perform additional duties as assigned by the supervisor EDUCATION & EXPERIENCE QUALIFICATIONS Education: High school diploma or General Education Degree (GED) required Experience: 2-3 years of hands-on experience operating CNC machinery, including lathes and milling machines, within a heavy manufacturing environment Technical Knowledge: Advanced ability to read and interpret engineering drawings and specifications, with a strong understanding of geometric dimensioning and tolerancing (GD&T) Mathematical Skills: Proficient in basic and applied mathematics, including addition, subtraction, multiplication, division, geometry, and algebra, for material fabrication and dimensional calculations PHYSICAL/NON-PHYSICAL REQUIREMENTS While performing the duties of this position, the employee is regularly required to stand, use hands to handle or feel objects, tools, or controls, and communicate effectively through speech and hearing The employee is occasionally required to walk, reach with hands and arms, stoop, kneel, crouch, or crawl The employee must be able to lift and/or move up to 50 pounds on occasion Vision requirements include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus While performing job duties, the employee may be occasionally exposed to moving mechanical parts and industrial vehicles The noise level in the work environment is typically moderate Competitive Benefits: (visit usbenefits.nov.com for more information about our benefits offerings) 401(k) Retirement Plan - NOV matches every dollar up to 5% of base pay and overtime for every dollar you invest. Competitive medical plans that are effective your date of hire. Coverage options for just yourself as an eligible employee start at as little as $40 per pay period (bi-weekly), and plans that cover your entire family (yourself, eligible spouse, and eligible children) start at $150.50 per pay period (bi-weekly). Starting in 2026, FREE MDLIVE virtual visits (when enrolled in an NOV medical plan). FREE preventative medical and dental care for the entire family (when enrolled in an NOV medical/dental plan and seeing an in-network physician). FREE Basic Life and AD&D insurance at 2 times your annual salary (for full-time employees). All regular full-time employees start with 3 weeks of paid vacation per year (prorated based on start date). Pre-NOV relevant experience (years of service) may be considered for vacation accruals. All regular full-time employees receive up to 11 paid holidays per year.

Brief Description: The CNC Machinist I is responsible for operating and maintaining CNC (Computer Numerical Control) machinery to produce precision components. This position ensures the highest quality standards in manufacturing by adhering to engineering specifications, safety protocols, and company procedures. The CNC Machinist I works under the direction of and will report to the Manufacturing Supervisor. Detailed Description: Operate CNC mills and CNC lathes machineries to produce parts and components to specification, ensuring quality and accuracy. Interpret blueprints, technical drawings, and work orders to understand product specifications and machining requirements. Set up and calibrate machinery, including selecting and installing appropriate tools, attachments, and materials. Load and verify CNC programs as required, ensuring that the correct program is selected for each job. Perform routine inspections and measurements of finished products using precision instruments such as calipers, micrometers, and gauges. Monitor machine performance during operation and make adjustments as necessary to maintain product quality and efficiency. Conduct preventive maintenance on CNC equipment to ensure optimal performance and minimize downtime. Identify and troubleshoot issues with machines, tools, or workpieces, resolving minor problems independently and escalating complex issues to supervisors. Maintain accurate production and inspection records, documenting any discrepancies or issues for reporting purposes. Collaborate with team members to identify opportunities for process improvement and implement solutions under guidance. Adhere to all safety protocols and wear appropriate personal protective equipment (PPE) to maintain a safe working environment. Job Requirements: Proficiency in operating and maintaining CNC mills and lathes. Ability to interpret and work from technical blueprints and schematics. Familiarity with measuring tools and quality assurance processes. Basic understanding of CNC programming principles. Strong attention to detail and manual dexterity to handle precision work. Effective communication and teamwork skills to collaborate with peers and supervisors. Ability to lift, push, and pull up to 50 lbs. and stand for extended periods. Basic computer knowledge. Basic math skills, including geometry and trigonometry, to calculate dimensions and tolerances. Minimum Qualifications: High School Diploma or GED. 2+ years of experience in CNC mill/lathe set-up and operation. Must pass a forklift operator test. Preferred Qualifications: Basic knowledge of CNC programming. Experience with G&M code editing. Completion of a formal CNC Machining Certification. Additional Details: The CNC Machinist I must work with an emphasis on safety for themselves and others including coworkers and third parties. The typical work environment will be in the shop or field which will require exposure to outdoor weather conditions, loud noise, working near moving mechanical parts, electrical energy, construction equipment, vibration, fumes, chemicals, and airborne particles.

Responsible operation of CNC Lathe or Mill machines assigned to produce quality parts, conforming to design specifications or approved deviations. This includes the ability to learn HMI navigation for basic machine functions, change machine tools, read blueprints, and use measuring devices. Additional responsibility includes leading or participating in daily autonomous maintenance and continuous improvements in safety, quality, and productivity. A Day In The Life * Safely operate CNC Lathe or Milling machines to produce good quality parts at the expected production rate. * Able to learn machine HMI to run parts as well as performing tool changes and manual adjustments for part alignment. * Able to read part print/drawing and perform quality inspection on machined parts with use of proper measuring devices such as calipers, micrometers, and thread gages. * Adhere to all safety rules and regulations, including OSHA training, safety attire and PPE, LOTO, and Hazardous Materials Handling. * Participate in safety, quality, and continuous improvement initiatives as applicable. * Maintain work area cleanliness and organization by 6S methodology and autonomous maintenance work practice. * Follow all written and verbal instructions to perform work correctly, including administrative and logistical processes such as production paperwork, scrap logs, reject counts, and part quantity weight count. What will help you thrive in this role? * Basic reading, writing, and arithmetic skills are normally acquired through a high school diploma or GED. * General understanding of basic machine operation, tooling, and work holding components. * Strong mechanical aptitude and desire to learn. * Basic analytical skills and ability to deal with frequent change, delays, or unexpected events. * Strong and respectful work ethics, taking responsibility for own actions and discipline, with commitment to attendance, teamwork, and general work rules. Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

PRIMARY DUTIES & RESPONSIBILITIES * Under minimal direction of a supervisor, responsible for quality parts produced on various machines such as but not limited to CNC boring mill machines. * Responsible for set-up, operation and inspection of quality parts for conformance to requirements holding close tolerances and maximum efficiencies. * Studies and interprets drawings, manuals, specifications or sample parts to determine dimensions and tolerances of finished work pieces, sequence of operations and setup requirements. * Measures and marks dimensions and reference points on material or work pieces as a guide for machining. * Detects equipment malfunctions or out of tolerance machining and adjusts machine, within capabilities, controls or control media as required to ensure quality of production. Reports all machine malfunctions to immediate supervisor. * Assists in the solution of complex plant operating problems and/or cost reduction projects. * Operates a forklift and lifting devices for movement of parts. * Communicates with supervisor, engineers, production control, quality and other shop personnel for assignments and to resolve machining or quality issues. * Responsible for keeping equipment and work area clean and orderly and perform basic preventative maintenance functions. * Responsible for the enforcement of all Company Health, Safety and Environmental rules. * Maintain a clean & organized work area; utilize safe work habits. * Perform other work-related tasks as assigned. EDUCATION & EXPERIENCE QUALIFICATIONS * 3-5 years' experience operating CNC HBM Machinist in a heavy manufacturing environment. * Fanuc Control Experience * Knowledge and application of precision measuring instruments and the application of such instruments, to include but not limited to calipers, ID & OD micrometers, depth gages, indicators and scales. * Knowledge of various tool holders, cutting tools, boring bars, and inserts used on various machines. * Forklift experience. JOB REQUIREMENTS * Ability to pass a drug screen & background check. * Must be able to create your own set up. * Must be able to read drawings and specifications with an advanced understanding of geometric tolerancing and dimensions. * Must possess basic math skills to include but not limited to adding, subtracting, multiplication, division, geometry and algebra for the purpose of calculating material fabrication. * Superior interpersonal and communication skills. * Ability to deal with problems involving a few concrete variables in standardized situations. * Able to work well in a team environment as well as self-directed when working independently. * Willingness to comply with all safety regulations and procedures. * Ability to adapt and be cross-trained to learn all job duties. * Ability to multitask in fast paced environment. * Factory environment with large range in temperature changes. * Ability to stand, walk, bend/stoop, push/pull and repetitive movement up to 12 hours daily. Competitive Benefits: (visit usbenefits.nov.com for more information about our benefits offerings) * 401(k) Retirement Plan - NOV matches every dollar up to 5% of base pay and overtime for every dollar you invest. * Competitive medical plans that are effective your date of hire. Coverage options for just yourself as an eligible employee start at as little as $40 per pay period (bi-weekly), and plans that cover your entire family (yourself, eligible spouse, and eligible children) start at $150.50 per pay period (bi-weekly). * Starting in 2026, FREE MDLIVE virtual visits (when enrolled in an NOV medical plan). * FREE preventative medical and dental care for the entire family (when enrolled in an NOV medical/dental plan and seeing an in-network physician). * FREE Basic Life and AD&D insurance at 2 times your annual salary (for full-time employees). * All regular full-time employees start with 3 weeks of paid vacation per year (prorated based on start date). Pre-NOV relevant experience (years of service) may be considered for vacation accruals. * All regular full-time employees receive up to 11 paid holidays per year.

PRIMARY DUTIES & RESPONSIBILITIES * Under minimal direction of a supervisor, responsible for quality parts produced on various machines such as but not limited to CNC boring mill machines. * Responsible for set-up, operation and inspection of quality parts for conformance to requirements holding close tolerances and maximum efficiencies. * Studies and interprets drawings, manuals, specifications or sample parts to determine dimensions and tolerances of finished work pieces, sequence of operations and setup requirements. * Measures and marks dimensions and reference points on material or work pieces as a guide for machining. * Detects equipment malfunctions or out of tolerance machining and adjusts machine, within capabilities, controls or control media as required to ensure quality of production. Reports all machine malfunctions to immediate supervisor. * Assists in the solution of complex plant operating problems and/or cost reduction projects. * Operates a forklift and lifting devices for movement of parts. * Communicates with supervisor, engineers, production control, quality and other shop personnel for assignments and to resolve machining or quality issues. * Responsible for keeping equipment and work area clean and orderly and perform basic preventative maintenance functions. * Responsible for the enforcement of all Company Health, Safety and Environmental rules. * May perform other duties as assigned by supervisor. EDUCATION & EXPERIENCE QUALIFICATIONS * 3-5 years' experience operating CNC HBM Machinist in a heavy manufacturing environment. * Fanuc Control Experience * Be able to create your own set-up * Advanced knowledge of reading drawings and specifications with an advanced understanding of geometric tolerancing and dimensions. * Must possess basic math skills to include but not limited to adding, subtracting, multiplication, division, geometry and algebra for the purpose of calculating material fabrication TECHNICAL COMPETENCIES * Knowledge and application of precision measuring instruments and the application of such instruments, to include but not limited to calipers, ID & OD micrometers, depth gages, indicators and scales. * Knowledge of various tool holders, cutting tools, boring bars, and inserts used on various machines. Competitive Benefits: (visit usbenefits.nov.com for more information about our benefits offerings) * 401(k) Retirement Plan - NOV matches every dollar up to 5% of base pay and overtime for every dollar you invest. * Competitive medical plans that are effective your date of hire. Coverage options for just yourself as an eligible employee start at as little as $40 per pay period (bi-weekly), and plans that cover your entire family (yourself, eligible spouse, and eligible children) start at $150.50 per pay period (bi-weekly). * Starting in 2026, FREE MDLIVE virtual visits (when enrolled in an NOV medical plan). * FREE preventative medical and dental care for the entire family (when enrolled in an NOV medical/dental plan and seeing an in-network physician). * FREE Basic Life and AD&D insurance at 2 times your annual salary (for full-time employees). * All regular full-time employees start with 3 weeks of paid vacation per year (prorated based on start date). Pre-NOV relevant experience (years of service) may be considered for vacation accruals. * All regular full-time employees receive up to 11 paid holidays per year. NOV is an equal opportunity employer that is committed to inclusion and diversity. We take affirmative action to ensure equal opportunity for all applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other legally protected characteristics.

PRIMARY DUTIES & RESPONSIBILITIES Sets up and runs grinders per direction, following blueprints, programs and job layouts. Assembles cutting tools in tool holders and positions them in machine spindles as specified. Manipulates controls and enters commands to specified set point and to start machine. Observes and listens to machine operation to detect malfunctions such as worn or damaged cutting tools. Performs first piece inspection using precision measuring equipment and makes needed adjustments to maintain prescribed tolerances. Changes cutting tools and location of work piece during machining process as specified in setup instructions. Notifies supervisor of discrepancies. Adjusts machine feed and speed and changes cutters to machine parts according to specifications when automatic programming is faulty or machine malfunctions. May perform other duties as assigned by supervisor. EDUCATION & EXPERIENCE QUALIFICATIONS One year Machining certificate from college or technical school; or three to five years related experience and/or training; or equivalent combination of education and experience. Be able to create your own set-up Advanced knowledge of reading drawings and specifications with an advanced understanding of geometric tolerancing and dimensions. Must possess basic math skills to include but not limited to adding, subtracting, multiplication, division, geometry and algebra for the purpose of calculating material fabrication PHYSICAL/NON-PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel objects, tools or controls; talk or hear. The employee is frequently required to stand and walk. The employee is occasionally required to reach with hands and arms; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, depth perception, and the ability to adjust focus. Competitive Benefits: (visit usbenefits.nov.com for more information about our benefits offerings) 401(k) Retirement Plan - NOV matches every dollar up to 5% of base pay and overtime for every dollar you invest. Competitive medical plans that are effective your date of hire. Coverage options for just yourself as an eligible employee start at as little as $40 per pay period (bi-weekly), and plans that cover your entire family (yourself, eligible spouse, and eligible children) start at $150.50 per pay period (bi-weekly). Starting in 2026, FREE MDLIVE virtual visits (when enrolled in an NOV medical plan). FREE preventative medical and dental care for the entire family (when enrolled in an NOV medical/dental plan and seeing an in-network physician). FREE Basic Life and AD&D insurance at 2 times your annual salary (for full-time employees). All regular full-time employees start with 3 weeks of paid vacation per year (prorated based on start date). Pre-NOV relevant experience (years of service) may be considered for vacation accruals. All regular full-time employees receive up to 11 paid holidays per year. NOV is an equal opportunity employer that is committed to inclusion and diversity. We take affirmative action to ensure equal opportunity for all applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other legally protected characteristics.

Rotating Machinery Services, Inc (RMS Inc.) is seeking a qualified CNC Machinist to work 1st shift and perform a variety of machining practices involved in turning, milling, drilling, threading operations, etc. on rotating equipment components (pumps, turbines, compressors, and more) and assemblies to ensure compliance with specifications and quality requirements. JOB REQUIREMENTS AND QUALIFICATIONS Ability and willingness to be in the shop environment a minimum of 8 hours per day, primarily standing and sitting. Ability and willingness to work around and use large propane / acetylene. Ability to operate small lifts, pallet jacks and other lifting equipment (training will be provided on our specific equipment, but basic skills are required beforehand). Advanced oral and written communication. Advanced math skills to calculate tolerances and dimensions. Must be able to read and understand Blueprints and G-Code. Must be familiar with basic machining practices involved in turning, milling, drilling, threading operations. Must be competent reading drawings and following instructions necessary to produce usable and saleable parts. Must be proficient with the use of, the care of, and the calibration of all types of measuring devices (i.e., micrometers (OD and ID), dial calipers, dial indicators, etc.). Must possess and provide basic tools required for the execution of the position of machinist. Must be able to comply with all safety directives and programs established by the Company and or our customers. The above list of activities is not all inclusive but a general representation of the requirements of an RMS Inc. Machinist. This list is subject to change based on the needs of the company. Education: High School Diploma / GED from an accredited school or institution. Knowledge and/or Skill Requirements: OMEGA experience Proficient in running horizontal lathes, milling machines, VTL, and Bullard. Capable of reading drawings and proper use of calibrated measuring tools. Read drawings and use of micrometers. Basic machining knowledge and practices required. While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift. Ability and willingness to lift objects weighing up to 50 lbs., walk, climb, reach, kneel, crawl, and balance. Must be able to use hands for assembly and tool. Previous Experience: 10 years or more of Machinist experience required. OTHER INFORMATION The position will be based full time in our Pearland Works Facility. Physical Requirements: While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift. Ability and willingness to lift objects weighing up to 50 lbs., walk, climb, reach, kneel, crawl, and balance. Must be able to use hands for assembly and tool. Work Environment: While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts in a machine-shop environment. WHAT WE OFFER Competitive Pay Paid Time Off Medical / Dental / Vision 401k Employee Incentive Programs Employee Reimbursement Programs Come Join Rotating Machinery Services Inc. and watch your Career go TURBO! ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise-all backed by responsiveness in competitive prices and lead times. RMS' commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

RMS Inc. is looking for a CNC Lathe & VTL Machinist to join our team. The CNC Lathe & VTL Machinist will perform a variety of finish machining practices involved with drilling, threading (tap & thread mill), boring, etc., while maintaining close tolerances on a wide variety of components from various industries. The ideal candidate needs to be fluent with Fanuc Controls. The candidate must be able to read and interpret drawings, work instructions, read and understand programs, all to ensure compliance with specifications and quality requirements. Must have basic hand & measuring tools, indicators, etc. Candidate will perform a variety of finish machining practices involved with turning, boring, drilling and threading while maintaining close tolerances on a wide variety of components from various industries. Candidate needs to be fluent with Fanuc Controls, able to read and interpret drawings, work instructions, read and understand programs, all to ensure compliance with specifications and quality requirements. Must have basic hand & measuring tools, indicators, etc. Exceptional attention to details. Display ownership and accountability for tasks and responsibilities. Exceptional ability to manage competing priorities. Excellent interpersonal and customer service skills. Excellent verbal and written communication skills. Ability to work independently. Ability to work and interact professionally and respectfully with coworkers. Ability to manage other projects and responsibilities that may be added at the company's discretion. Exceptional ability to multitask, prioritize, and manage time and resources effectively. Excellent time management skills with a proven ability to meet deadlines. The above list of activities is not all inclusive but a general representation of the requirements of an RMS CNC Lathe & VTL Machinist. This list is subject to change based on the needs of the company. JOB REQUIREMENTS AND QUALIFICATIONS Ethical Conduct Exceptional problem-solving abilities and organizational skills Ability to be resourceful and proactive in dealing with issues that may arise. Able to read, write, understand, and speak English. Education: High school Diploma or equivalent form an accredited school or institution. Specialty certifications a plus. KNOWLEDGE AND/OR SKILL REQUIREMENTS Previous Experience: 10 years or more of experience required. Previous experience on parts 80” plus diameters. Physical Requirements: While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift. Ability and willingness to lift objects weighing up to 30 lbs., walk, climb, reach, kneel, crawl and balance. Must be able to use hands for assembly and tool usage. Must not have allergies or issues related to handling metals including aluminum, copper, bronze, and steel. OTHER INFORMATION This position will be based full time in our Tomball, TX (77377) facility. Some weekends depending on company needs. Ability to interact with entire company and vendors. Able to pass a pre-employment drug and alcohol test. Clear and Clean Background check - condition of employment. Authorized to work in the United States. Work Environment: While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts in a machine-shop environment. WHAT WE OFFER Competitive Pay Paid Time Off Medical / Dental / Vision 401k Employee Incentive Programs Employee Reimbursement Programs Come Join Rotating Machinery Services Inc. and watch your Career go TURBO! Visit ************************* to learn more about who we are and what we do. ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise-all backed by responsiveness in competitive prices and lead times. RMS' commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

The CNC Horizontal Boring Mill Machinist (HBM) will perform a variety of finish machining practices involved with drilling, threading (tap & thread mill), boring, etc., while maintaining close tolerances on a wide variety of components from various industries. The ideal candidate needs to be fluent with Fanuc Controls (Tosnuc) including A+ experience with cogs dill contouring heads and the use of right-angle heads. The candidate must be able to read and interpret drawings, work instructions, read and understand programs, all to ensure compliance with specifications and quality requirements. Must have basic hand & measuring tools, indicators, etc. REQUIREMENTS AND QUALIFICATIONS Maintain a safe working environment and a commitment to safety excellence. Responsible for understanding and complying with the safety policy, procedures, and instructions. Maintaining a clean and organized work area Must be able to read and understand Blueprints and G-Code Other projects and responsibilities may be added at the company's discretion. Monitor machine while working to adjust the feed, maintain temperature and identify issues. KNOWLEDGE AND/OR SKILL REQUIREMENTS Ethical Conduct Exceptional problem-solving abilities and organizational skills Ability to be resourceful and proactive in dealing with issues that may arise. Able to read, write, understand, and speak English. Organizational: Exceptional attention to details. Display ownership and accountability for tasks and responsibilities. Exceptional ability to manage competing priorities. Interpersonal: Excellent interpersonal and customer service skills. Excellent verbal and written communication skills. Ability to work independently. Ability to work and interact professionally and respectfully with coworkers. Efficiency: Ability to manage other projects and responsibilities that may be added at the company's discretion. Exceptional ability to multitask, prioritize, and manage time and resources effectively. Excellent time management skills with a proven ability to meet deadlines. The above list of activities is not all inclusive but a general representation of the requirements of an RMS CNC Horizontal Boring Mill Machinist. This list is subject to change based on the needs of the company. Education: Highschool Diploma or GED from an accredited learning institution Previous Experience: 2 Years Previous experience preferred. OTHER INFORMATION The position will be based full time in our Tomball, TX facility. Evening and weekends depending on company needs. Position will have a 60-day probation period. At the end of the probation period, the machinist will be reviewed to determine competency of work performance and compliance with established company safety directives. Position will be compensated on an hourly basis, with bi-weekly pay periods. Able to understand, read, write and speak English proficiently in order to communicate with shop supervision and safety directives. Legal to work in the United States. Able to pass a pre-employment drug and alcohol test, physical performance evaluation and background check. Physical Requirements: While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift. Ability and willingness to lift objects weighing up to 50 lbs., walk, climb, reach, kneel, crawl, and balance. Must be able to use hands for assembly and tool usage. Must not have allergies or issues related to handling metals including aluminum, copper, bronze, and steel. Work Environment: While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts in a machine-shop environment. WHAT WE OFFER Competitive Pay Paid Time Off Medical / Dental / Vision 401k Employee Incentive Programs Employee Reimbursement Programs Come Join Rotating Machinery Services Inc. and watch your Career go TURBO! ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise-all backed by responsiveness in competitive prices and lead times. RMS' commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description RMS Inc. is looking for a CNC Lathe & VTL Machinist to join our team. The CNC Lathe & VTL Machinist will perform a variety of finish machining practices involved with drilling, threading (tap & thread mill), boring, etc., while maintaining close tolerances on a wide variety of components from various industries. The ideal candidate needs to be fluent with Fanuc Controls. The candidate must be able to read and interpret drawings, work instructions, read and understand programs, all to ensure compliance with specifications and quality requirements. Must have basic hand & measuring tools, indicators, etc. Candidate will perform a variety of finish machining practices involved with turning, boring, drilling and threading while maintaining close tolerances on a wide variety of components from various industries. Candidate needs to be fluent with Fanuc Controls, able to read and interpret drawings, work instructions, read and understand programs, all to ensure compliance with specifications and quality requirements. Must have basic hand & measuring tools, indicators, etc. Exceptional attention to details. Display ownership and accountability for tasks and responsibilities. Exceptional ability to manage competing priorities. Excellent interpersonal and customer service skills. Excellent verbal and written communication skills. Ability to work independently. Ability to work and interact professionally and respectfully with coworkers. Ability to manage other projects and responsibilities that may be added at the company's discretion. Exceptional ability to multitask, prioritize, and manage time and resources effectively. Excellent time management skills with a proven ability to meet deadlines. The above list of activities is not all inclusive but a general representation of the requirements of an RMS CNC Lathe & VTL Machinist. This list is subject to change based on the needs of the company. JOB REQUIREMENTS AND QUALIFICATIONS Ethical Conduct Exceptional problem-solving abilities and organizational skills Ability to be resourceful and proactive in dealing with issues that may arise. Able to read, write, understand, and speak English. Education: High school Diploma or equivalent form an accredited school or institution. Specialty certifications a plus. KNOWLEDGE AND/OR SKILL REQUIREMENTS Previous Experience: 10 years or more of experience required. Previous experience on parts 80” plus diameters. Physical Requirements: While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift. Ability and willingness to lift objects weighing up to 30 lbs., walk, climb, reach, kneel, crawl and balance. Must be able to use hands for assembly and tool usage. Must not have allergies or issues related to handling metals including aluminum, copper, bronze, and steel. OTHER INFORMATION This position will be based full time in our Tomball, TX (77377) facility. Some weekends depending on company needs. Ability to interact with entire company and vendors. Able to pass a pre-employment drug and alcohol test. Clear and Clean Background check - condition of employment. Authorized to work in the United States. Work Environment: While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts in a machine-shop environment. WHAT WE OFFER Competitive Pay Paid Time Off Medical / Dental / Vision 401k Employee Incentive Programs Employee Reimbursement Programs Come Join Rotating Machinery Services Inc. and watch your Career go TURBO! Visit ************************* to learn more about who we are and what we do. ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise-all backed by responsiveness in competitive prices and lead times. RMS' commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

The CNC Horizontal Boring Mill Machinist (HBM) will perform a variety of finish machining practices involved with drilling, threading (tap & thread mill), boring, etc., while maintaining close tolerances on a wide variety of components from various industries. The ideal candidate needs to be fluent with Fanuc Controls (Tosnuc) including A+ experience with cogs dill contouring heads and the use of right-angle heads. The candidate must be able to read and interpret drawings, work instructions, read and understand programs, all to ensure compliance with specifications and quality requirements. Must have basic hand & measuring tools, indicators, etc. REQUIREMENTS AND QUALIFICATIONS Maintain a safe working environment and a commitment to safety excellence. Responsible for understanding and complying with the safety policy, procedures, and instructions. Maintaining a clean and organized work area Must be able to read and understand Blueprints and G-Code Other projects and responsibilities may be added at the company's discretion. Monitor machine while working to adjust the feed, maintain temperature and identify issues. KNOWLEDGE AND/OR SKILL REQUIREMENTS Ethical Conduct Exceptional problem-solving abilities and organizational skills Ability to be resourceful and proactive in dealing with issues that may arise. Able to read, write, understand, and speak English. Organizational: Exceptional attention to details. Display ownership and accountability for tasks and responsibilities. Exceptional ability to manage competing priorities. Interpersonal: Excellent interpersonal and customer service skills. Excellent verbal and written communication skills. Ability to work independently. Ability to work and interact professionally and respectfully with coworkers. Efficiency: Ability to manage other projects and responsibilities that may be added at the company's discretion. Exceptional ability to multitask, prioritize, and manage time and resources effectively. Excellent time management skills with a proven ability to meet deadlines. The above list of activities is not all inclusive but a general representation of the requirements of an RMS CNC Horizontal Boring Mill Machinist. This list is subject to change based on the needs of the company. Education: Highschool Diploma or GED from an accredited learning institution Previous Experience: 2 Years Previous experience preferred. OTHER INFORMATION The position will be based full time in our Tomball, TX facility. Evening and weekends depending on company needs. Position will have a 60-day probation period. At the end of the probation period, the machinist will be reviewed to determine competency of work performance and compliance with established company safety directives. Position will be compensated on an hourly basis, with bi-weekly pay periods. Able to understand, read, write and speak English proficiently in order to communicate with shop supervision and safety directives. Legal to work in the United States. Able to pass a pre-employment drug and alcohol test, physical performance evaluation and background check. Physical Requirements: While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift. Ability and willingness to lift objects weighing up to 50 lbs., walk, climb, reach, kneel, crawl, and balance. Must be able to use hands for assembly and tool usage. Must not have allergies or issues related to handling metals including aluminum, copper, bronze, and steel. Work Environment: While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts in a machine-shop environment. WHAT WE OFFER Competitive Pay Paid Time Off Medical / Dental / Vision 401k Employee Incentive Programs Employee Reimbursement Programs Come Join Rotating Machinery Services Inc. and watch your Career go TURBO! ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise-all backed by responsiveness in competitive prices and lead times. RMS' commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Shift Days/Hours: 1st shift Monday - Friday 6:00 am - 2:30 pm. /OBJECTIVE: To Prep billets on a lathe for the CNC department. ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform the Essential functions. Set up a machine to Prep the billets on the face, and groove, turn down O.D and I.D. Control inventory. Inspect goods. Implement and practice Lean Manufacturing tools including 5S, to increase productivity, and eliminate waste. Assist in cross-training. Maintain a 5S checklist as it applies to your work area. Perform other related duties assigned by the lead or supervisor. Other Requirements Must be able to learn basic computer skills. Must be able to use measuring devices. Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials. Must be able to work in an environment with various temperatures. Required Education and Experience: High school diploma or equivalent. Must have 6 months to 1 year of work-related experience or be qualified by certification. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times. Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 50 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit, and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand.

Location: Accuseal Houston, TXShift Days/Hours: 1st shift Monday - Friday 6:00 am - 2:30 pm. /OBJECTIVE: To Prep billets on a lathe for the CNC department. ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform the Essential functions. Set up a machine to Prep the billets on the face, and groove, turn down O.D and I.D. Control inventory. Inspect goods. Implement and practice Lean Manufacturing tools including 5S, to increase productivity, and eliminate waste. Assist in cross-training. Maintain a 5S checklist as it applies to your work area. Perform other related duties assigned by the lead or supervisor. Other Requirements Must be able to learn basic computer skills. Must be able to use measuring devices. Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials. Must be able to work in an environment with various temperatures. Required Education and Experience: High school diploma or equivalent. Must have 6 months to 1 year of work-related experience or be qualified by certification. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times. Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 50 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit, and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand.

Brief Description: The Sr. Machinist will oversee work on a manual lathe which ensures cutting a variety of mud motor parts. All machinists should ensure each part of all measurements are accurate and that all parts are usable after cutting. This role is also responsible for visual inspection of all parts upon completion and QA/QC of all parts before being taken out of lathe. The Sr. Machinist role will report directly to the Machine Shop Supervisor (Production Foreman). Detailed Description: * Oversee inspection of all parts produced or machined * Repair all equipment brought to the machine shop * Provide effective QA/QC procedures during production * Ability to work independently in troubleshooting and resolving problems concerning machining operations * Perform secondary machining operations on components parts as required * Perform detailed analysis of the component parts configuration/dimensions to determine efficiency in machining operations required for production * Assess worn parts to determine whether they need to be repaired or replaced * Work with engineering and fellow supervisory personnel to troubleshoot and resolve design equipment and work through operating difficulties * Perform preventive maintenance duties as scheduled by the maintenance department * Provide training of lower-level machinists, answering work questions, resolving operating difficulties and reviewing completed work assignments * Document inspections, test results, repair work done * Oversee cleanliness and organization of the shop * Ensure that all equipment is clean and in good working order * Safely operate forklift to move equipment around the yard * Load machine with workpieces or raw materials * Strong familiarity with CAD drawings and geometric dimensioning testing * Performs other related duties as assigned Job Requirements: * Solid experience using various measuring equipment * Ability to operate an overhead crane * Clear vision to judge near and far distances to maintain awareness of reporting ongoing work activities to coworkers and third party * Maintain spatial orientation and awareness to safely move around work environment with many moving objects * Knowledge and experience with tools and materials * Broad knowledge of machining techniques to perform advanced setup operations * Proficient in the use of cutting tools & measuring equipment * Ability to read and understand blueprints drawings * Ability to work independently to troubleshoot and resolve problems concerning machining operations and tools * Ability to lead by example and be a good mentor to junior employees * Demonstrate clear written and verbal communication skills, including ability to promptly give and follow directions when working with others * Ability to handle multiple projects and supervisors at once * Must have good interpersonal and communication skills including ability to interact productively with coworkers and third parties * Ability to use a variety of hand and power tools to perform a range of mechanically oriented functions including independent use of heavy-duty handheld and long-handled tools * Ability to safely navigate the shop work sites with occasional walking, climbing, standing, stepping, etc. during normal operating conditions (day/night, outdoor hot/cold weather) * Lift and carry 50 pounds independently while potentially walking on uneven surfaces * Bend, stoop, kneel, twist, and crawl occasionally during visits to field and operational work areas * Listen for unusual noises that signify equipment and machinery problems * Stay alert and focused up including occasional extended work periods * Must be willing and able to be on call after hours and work on weekends * Wear Personal Protective Equipment (PPE) at all designated times * Good computer skills and proficiency in Microsoft Office Minimum Qualifications: * High school diploma or GED equivalent * 5+ years of experience running a manual lathe * Must live within a 1 hour driving distance of the shop * Availability to work on call rotation as well as overtime * Experience machining API connections and/or tapered connections. Preferred Qualifications: * Experience training junior machinists Additional Details: The Sr. Machinist must work with an emphasis on safety for themselves and others including coworkers and third parties. The typical work environment will be in the shop or field which will require exposure to outdoor weather conditions, loud noise, working near moving mechanical parts, electrical energy, construction equipment, vibration, fumes, chemicals and airborne particles.

Brief Description: The Sr. Machinist will oversee work on a manual lathe which ensures cutting a variety of mud motor parts. All machinists should ensure each part of all measurements are accurate and that all parts are usable after cutting. This role is also responsible for visual inspection of all parts upon completion and QA/QC of all parts before being taken out of lathe. The Sr. Machinist role will report directly to the Machine Shop Supervisor (Production Foreman). Detailed Description: Oversee inspection of all parts produced or machined Repair all equipment brought to the machine shop Provide effective QA/QC procedures during production Ability to work independently in troubleshooting and resolving problems concerning machining operations Perform secondary machining operations on components parts as required Perform detailed analysis of the component parts configuration/dimensions to determine efficiency in machining operations required for production Assess worn parts to determine whether they need to be repaired or replaced Work with engineering and fellow supervisory personnel to troubleshoot and resolve design equipment and work through operating difficulties Perform preventive maintenance duties as scheduled by the maintenance department Provide training of lower-level machinists, answering work questions, resolving operating difficulties and reviewing completed work assignments Document inspections, test results, repair work done Oversee cleanliness and organization of the shop Ensure that all equipment is clean and in good working order Safely operate forklift to move equipment around the yard Load machine with workpieces or raw materials Strong familiarity with CAD drawings and geometric dimensioning testing Performs other related duties as assigned Job Requirements: Solid experience using various measuring equipment Ability to operate an overhead crane Clear vision to judge near and far distances to maintain awareness of reporting ongoing work activities to coworkers and third party Maintain spatial orientation and awareness to safely move around work environment with many moving objects Knowledge and experience with tools and materials Broad knowledge of machining techniques to perform advanced setup operations Proficient in the use of cutting tools & measuring equipment Ability to read and understand blueprints drawings Ability to work independently to troubleshoot and resolve problems concerning machining operations and tools Ability to lead by example and be a good mentor to junior employees Demonstrate clear written and verbal communication skills, including ability to promptly give and follow directions when working with others Ability to handle multiple projects and supervisors at once Must have good interpersonal and communication skills including ability to interact productively with coworkers and third parties Ability to use a variety of hand and power tools to perform a range of mechanically oriented functions including independent use of heavy-duty handheld and long-handled tools Ability to safely navigate the shop work sites with occasional walking, climbing, standing, stepping, etc. during normal operating conditions (day/night, outdoor hot/cold weather) Lift and carry 50 pounds independently while potentially walking on uneven surfaces Bend, stoop, kneel, twist, and crawl occasionally during visits to field and operational work areas Listen for unusual noises that signify equipment and machinery problems Stay alert and focused up including occasional extended work periods Must be willing and able to be on call after hours and work on weekends Wear Personal Protective Equipment (PPE) at all designated times Good computer skills and proficiency in Microsoft Office Minimum Qualifications: High school diploma or GED equivalent 5+ years of experience running a manual lathe Must live within a 1 hour driving distance of the shop Availability to work on call rotation as well as overtime Experience machining API connections and/or tapered connections. Preferred Qualifications: Experience training junior machinists Additional Details: The Sr. Machinist must work with an emphasis on safety for themselves and others including coworkers and third parties. The typical work environment will be in the shop or field which will require exposure to outdoor weather conditions, loud noise, working near moving mechanical parts, electrical energy, construction equipment, vibration, fumes, chemicals and airborne particles.

Rotating Machinery Services, Inc (RMS Inc.) is seeking a qualified Manual Machinist to work 1st shift and perform a variety of machining practices involved in turning, milling, drilling, threading operations, etc. They perform a detailed incoming inspection using micrometers and other fine measurement tools, learn to draw prints based on their findings and make recommendations on necessary critical repairs. As well rounded machinists and fabricators they are able to select and operate the proper machine shop tools to remove damaged babbitt and prepare the bearing for repair. They may also use raw materials, welding tools, flame spraying, or electrical test equipment to manufacture, alter or test components as part of the process. During the babbitting process they move the part to our custom foundry where they apply new babbitt using various casting techniques. Once the babbitt is cast, their skill at precision machining and metalworking outputs a finished bearing crafted to precise dimensions. Using non-destructive testing techniques and measurement tools they verify the quality and dimensions of their work before preparing the bearing to ship to the customer. JOB REQUIREMENTS AND QUALIFICATIONS Ability and willingness to be in the shop environment a minimum of 8 hours per day, primarily standing and sitting. Ability and willingness to work around and use large propane / acetylene. Ability to operate small lifts, pallet jacks and other lifting equipment (training will be provided on our specific equipment, but basic skills are required beforehand). Advanced oral and written communication. Advanced math skills to calculate tolerances and dimensions. Must be able to read and understand Blueprints and G-Code. Must be familiar with basic machining practices involved in turning, milling, drilling, threading operations. Must be competent reading drawings and following instructions necessary to produce usable and saleable parts. Must be able to hold tolerances as dictated by drawings, written instructions, or industry standards. Must be proficient with the use of, the care of, and the calibration of all types of measuring devices (i.e., micrometers (OD and ID), dial calipers, dial indicators, etc.). Must possess and provide basic tools required for the execution of the position of manual machinist. Must be able to comply with all safety directives and programs established by the Company and or our customers. The above list of activities is not all inclusive but a general representation of the requirements of an RMS Inc. Machinist. This list is subject to change based on the needs of the company. Education: High School Diploma or Equivalent Knowledge and/or Skill Requirements: OMEGA experience Proficient in running horizontal lathes and milling machines. Capable of reading drawings and proper use of calibrated measuring tools. Can hold tolerances of .0005". Read drawings and use of micrometers. Basic machining knowledge and practices required. While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift. Ability and willingness to lift objects weighing up to 50 lbs., walk, climb, reach, kneel, crawl, and balance. Must be able to use hands for assembly and tool. Previous Experience: 5 - 10 years of Manual Machinist experience required. OTHER INFORMATION The position will be based full-time in our South Houston, TX facility. Availability to work weekends, holidays and overtime to meet company needs. Able to understand, read, write, and speak English proficiently. Authorized to work in the United States. Able to pass a pre-employment drug screen, background check and physical requirements. This role can be required to participate in company and/or customers random drug testing requirements. While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift. Ability and willingness to lift objects weighing up to 50 lbs. with assistance, walk, climb, reach above head, and balance. Must be able to use hands for assembly and tool usage. Must not have allergies or issues related to handling metals including aluminum, copper, bronze, and steel. Work Environment: While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts. While the work area may be described as generally clean, safe, and "not loud", there will be machining operations that generate moderate noise and metal particles. WHAT WE OFFER Competitive Pay Paid Time Off Medical / Dental / Vision 401k Employee Incentive Programs Employee Reimbursement Programs Come Join Rotating Machinery Services Inc. and watch your Career go TURBO! Visit ************************* to learn more about who we are and what we do. ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise-all backed by responsiveness in competitive prices and lead times. RMS' commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Rotating Machinery Services, Inc (RMS Inc.) is seeking a qualified Manual Machinist to work 1st shift and perform a variety of machining practices involved in turning, milling, drilling, threading operations, etc. They perform a detailed incoming inspection using micrometers and other fine measurement tools, learn to draw prints based on their findings and make recommendations on necessary critical repairs. As well rounded machinists and fabricators they are able to select and operate the proper machine shop tools to remove damaged babbitt and prepare the bearing for repair. They may also use raw materials, welding tools, flame spraying, or electrical test equipment to manufacture, alter or test components as part of the process. During the babbitting process they move the part to our custom foundry where they apply new babbitt using various casting techniques. Once the babbitt is cast, their skill at precision machining and metalworking outputs a finished bearing crafted to precise dimensions. Using non-destructive testing techniques and measurement tools they verify the quality and dimensions of their work before preparing the bearing to ship to the customer. JOB REQUIREMENTS AND QUALIFICATIONS Ability and willingness to be in the shop environment a minimum of 8 hours per day, primarily standing and sitting. Ability and willingness to work around and use large propane / acetylene. Ability to operate small lifts, pallet jacks and other lifting equipment (training will be provided on our specific equipment, but basic skills are required beforehand). Advanced oral and written communication. Advanced math skills to calculate tolerances and dimensions. Must be able to read and understand Blueprints and G-Code. Must be familiar with basic machining practices involved in turning, milling, drilling, threading operations. Must be competent reading drawings and following instructions necessary to produce usable and saleable parts. Must be able to hold tolerances as dictated by drawings, written instructions, or industry standards. Must be proficient with the use of, the care of, and the calibration of all types of measuring devices (i.e., micrometers (OD and ID), dial calipers, dial indicators, etc.). Must possess and provide basic tools required for the execution of the position of manual machinist. Must be able to comply with all safety directives and programs established by the Company and or our customers. The above list of activities is not all inclusive but a general representation of the requirements of an RMS Inc. Machinist. This list is subject to change based on the needs of the company. Education: High School Diploma or Equivalent Knowledge and/or Skill Requirements: OMEGA experience Proficient in running horizontal lathes and milling machines. Capable of reading drawings and proper use of calibrated measuring tools. Can hold tolerances of .0005". Read drawings and use of micrometers. Basic machining knowledge and practices required. While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift. Ability and willingness to lift objects weighing up to 50 lbs., walk, climb, reach, kneel, crawl, and balance. Must be able to use hands for assembly and tool. Previous Experience: 5 - 10 years of Manual Machinist experience required. OTHER INFORMATION The position will be based full-time in our South Houston, TX facility. Availability to work weekends, holidays and overtime to meet company needs. Able to understand, read, write, and speak English proficiently. Authorized to work in the United States. Able to pass a pre-employment drug screen, background check and physical requirements. This role can be required to participate in company and/or customers random drug testing requirements. While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift. Ability and willingness to lift objects weighing up to 50 lbs. with assistance, walk, climb, reach above head, and balance. Must be able to use hands for assembly and tool usage. Must not have allergies or issues related to handling metals including aluminum, copper, bronze, and steel. Work Environment: While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts. While the work area may be described as generally clean, safe, and "not loud", there will be machining operations that generate moderate noise and metal particles. WHAT WE OFFER Competitive Pay Paid Time Off Medical / Dental / Vision 401k Employee Incentive Programs Employee Reimbursement Programs Come Join Rotating Machinery Services Inc. and watch your Career go TURBO! Visit ************************* to learn more about who we are and what we do. ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise-all backed by responsiveness in competitive prices and lead times. RMS' commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Conhagen is seeking an Intermediate Manual Machinist for our Kenner, LA location. The ideal candidate should possess at least 3-5 years of machining experience. The Manual Machinist will perform machining operations on pumps, turbines, and other equipment components in the Conhagen machine shop as directed. Requirements: • 3-5 years of manual machining experience • Familiarity with interpreting blueprints • Knowledge of HSE procedures and machining principles • Proficiency in using measuring equipment • Skills in various machining operations About Us: • Climate-controlled shop with safety gear provided • On-the-job training and mentorship • Tuition and certification reimbursement • Employee perks, including fitness expenses reimbursement, boot reimbursement program, and more. Job Responsibilities: • Fabricate parts from blueprints using various materials • Use precision measuring tools • Inspect machinery and adjust as needed • Operate transportation machinery • Ensure compliance with safety regulations • Distribute work and manage the department in the absence of the supervisor Requirements: • Adequate English language skills • Authorization to work in the U.S. • Background check and drug screening required • Minimum two-year background in manual machining • Proficiency in various machining tools • Leadership capacity or experience • History of safety compliance Working Conditions: • Machining shop environment with moderate noise • Use of specified safety gear • Potential for overtime • Flexibility to changes in work orders and schedules • Equal opportunity employer

Job Description Conhagen is seeking a Senior Manual Machinist for our Kenner, LA location. The ideal candidate should possess 10 years of machining experience. Serve as a technical resource for complex issues. Overview: Perform machining operations on pump, turbine, and other equipment components at Conhagen's machine shop. Serve as a technical resource for complex issues. Knowledge: Familiarity with HSE procedures and regulations Understanding of machining speeds, feeds, and tooling Knowledge of pump and turbine components, critical fits, and surfaces Education/Certifications: High school diploma or equivalent preferred Vocational training in manual machining preferred Job Responsibilities: Fabricate parts from blueprints using various materials Use precision measuring tools Inspect machinery and adjust as needed Operate transportation machinery Ensure compliance with safety regulations Train apprentice machinists Skills and Abilities: Perform high-quality, efficient work independently Proficiency with measuring equipment (ID & OD micrometers, dial indicators) Expertise in advanced machining operations, including complex parts and milling setups Read, write, and speak English fluently Adhere to health, safety, and environmental procedures Complete company documentation accurately and promptly Experience: 10+ years of experience operating manual machining equipment Knowledge of rotating equipment components Leadership & Impact: Act as a resource for knowledge transfer and training Troubleshoot and resolve issues independently Work with minimal supervision, following standard practices Impact operational and financial outcomes through skilled work Ensure HSE performance and work quality, leading to customer satisfaction Join Conhagen and contribute to a team where your expertise makes a difference! Compliance and Acknowledgment: Acknowledge flexibility in work assignments and equal opportunity employer policy.